Commit Graph

878 Commits

Author SHA1 Message Date
Leo Yan
fe0aed19b2 perf test: Introduce script for Arm CoreSight testing
We need a simple method to test Perf with ARM CoreSight drivers, this
could be used for smoke testing when new patch is coming for perf or
CoreSight drivers, and we also can use the test to confirm if the
CoreSight has been enabled successfully on new platforms.

This patch introduces the shell script test_arm_coresight.sh which is
under the 'pert test' framework.  This script provides three testing
scenarios:

Test scenario 1: traverse all possible paths between source and sink

For traversing possible paths, simply to say, the testing rationale is
source oriented testing, it traverses every source (now only refers to
ETM device) and test its all possible sinks.  To search the complete
paths from one specific source to its sinks, this patch relies on the
sysfs '/sys/bus/coresight/devices/devX/out:Y' for depth-first search
(DFS) for iteration connected device nodes, if the output device is
detected as a sink device (the script will exclude TPIU device which can
not be supported for perf PMU), then it will test trace data recording
and decoding for it.

The script runs three output testings for every trace data:

- Test branch samples dumping with 'perf script' command;

- Test branch samples reporting with 'perf report' command;

- Use option '--itrace=i1000i' to insert synthesized instructions events
  and the script will check if perf can output the percentage value
  successfully based on the instruction samples.

Test scenario 2: system-wide test

For system-wide testing, it passes option '-a' to perf tool to enable
tracing on all CPUs, so it's hard to say which program will be traced.
But perf tool itself contributes much overload in this case, so it will
parse trace data and check if process 'perf' can be detected or not.

Test scenario 3: snapshot mode test.

For snapshot mode testing, it uses 'dd' command to launch a long running
program, so this can give chance to send signal -USR2; it will check the
captured trace data contains 'dd' related thread info or not.

If any test fails, it will report failure and directly exit with error.
This test will be only applied on a platform with PMU event 'cs_etm//',
otherwise will skip the testing.

Below is detailed usage for it:

  # cd $linux/tools/perf  -> This is important so can use shell script
  # perf test list
    [...]
    70: probe libc's inet_pton & backtrace it with ping
    71: Check Arm CoreSight trace data recording and synthesized samples
    72: Check open filename arg using perf trace + vfs_getname
    73: Zstd perf.data compression/decompression
    74: Add vfs_getname probe to get syscall args filenames
    75: Use vfs_getname probe to get syscall args filenames

  # perf test 71
    71: Check Arm CoreSight trace data recording and branch samples: Ok

Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200907130154.9601-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-10 09:08:10 -03:00
Arnaldo Carvalho de Melo
20719c82f4 perf tools: Add build test with GTK+
So that when we use:

make -C tools/perf build-test

One of the entries will ask for building with GTK+ 2.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-09 11:12:10 -03:00
Remi Bernon
ed21d6d7c4 perf tests: Add test for PE binary format support
This adds a precompiled file in PE binary format, with split debug file,
and tries to read its build_id and .gnu_debuglink sections, as well as
looking up the main symbol from the debug file. This should succeed if
libbfd is supported.

Committer testing:

  $ perf test "PE file support"
  68: PE file support           : Ok
  $

Signed-off-by: Remi Bernon <rbernon@codeweavers.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jacek Caban <jacek@codeweavers.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200821165238.1340315-3-rbernon@codeweavers.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-04 14:38:15 -03:00
Thomas Richter
492d4d876c perf test: Set NULL sentinel in pmu_events table in "Parse and process metrics" test
Linux 5.9 introduced perf test case "Parse and process metrics" and
on s390 this test case always dumps core:

  [root@t35lp67 perf]# ./perf test -vvvv -F 67
  67: Parse and process metrics                             :
  --- start ---
  metric expr inst_retired.any / cpu_clk_unhalted.thread for IPC
  parsing metric: inst_retired.any / cpu_clk_unhalted.thread
  Segmentation fault (core dumped)
  [root@t35lp67 perf]#

I debugged this core dump and gdb shows this call chain:

  (gdb) where
   #0  0x000003ffabc3192a in __strnlen_c_1 () from /lib64/libc.so.6
   #1  0x000003ffabc293de in strcasestr () from /lib64/libc.so.6
   #2  0x0000000001102ba2 in match_metric(list=0x1e6ea20 "inst_retired.any",
            n=<optimized out>)
       at util/metricgroup.c:368
   #3  find_metric (map=<optimized out>, map=<optimized out>,
           metric=0x1e6ea20 "inst_retired.any")
      at util/metricgroup.c:765
   #4  __resolve_metric (ids=0x0, map=<optimized out>, metric_list=0x0,
           metric_no_group=<optimized out>, m=<optimized out>)
      at util/metricgroup.c:844
   #5  resolve_metric (ids=0x0, map=0x0, metric_list=0x0,
          metric_no_group=<optimized out>)
      at util/metricgroup.c:881
   #6  metricgroup__add_metric (metric=<optimized out>,
        metric_no_group=metric_no_group@entry=false, events=<optimized out>,
        events@entry=0x3ffd84fb878, metric_list=0x0,
        metric_list@entry=0x3ffd84fb868, map=0x0)
      at util/metricgroup.c:943
   #7  0x00000000011034ae in metricgroup__add_metric_list (map=0x13f9828 <map>,
        metric_list=0x3ffd84fb868, events=0x3ffd84fb878,
        metric_no_group=<optimized out>, list=<optimized out>)
      at util/metricgroup.c:988
   #8  parse_groups (perf_evlist=perf_evlist@entry=0x1e70260,
          str=str@entry=0x12f34b2 "IPC", metric_no_group=<optimized out>,
          metric_no_merge=<optimized out>,
          fake_pmu=fake_pmu@entry=0x1462f18 <perf_pmu.fake>,
          metric_events=0x3ffd84fba58, map=0x1)
      at util/metricgroup.c:1040
   #9  0x0000000001103eb2 in metricgroup__parse_groups_test(
  	evlist=evlist@entry=0x1e70260, map=map@entry=0x13f9828 <map>,
  	str=str@entry=0x12f34b2 "IPC",
  	metric_no_group=metric_no_group@entry=false,
  	metric_no_merge=metric_no_merge@entry=false,
  	metric_events=0x3ffd84fba58)
      at util/metricgroup.c:1082
   #10 0x00000000010c84d8 in __compute_metric (ratio2=0x0, name2=0x0,
          ratio1=<synthetic pointer>, name1=0x12f34b2 "IPC",
  	vals=0x3ffd84fbad8, name=0x12f34b2 "IPC")
      at tests/parse-metric.c:159
   #11 compute_metric (ratio=<synthetic pointer>, vals=0x3ffd84fbad8,
  	name=0x12f34b2 "IPC")
      at tests/parse-metric.c:189
   #12 test_ipc () at tests/parse-metric.c:208
.....
..... omitted many more lines

This test case was added with
commit 218ca91df4 ("perf tests: Add parse metric test for frontend metric").

When I compile with make DEBUG=y it works fine and I do not get a core dump.

It turned out that the above listed function call chain worked on a struct
pmu_event array which requires a trailing element with zeroes which was
missing. The marco map_for_each_event() loops over that array tests for members
metric_expr/metric_name/metric_group being non-NULL. Adding this element fixes
the issue.

Output after:

  [root@t35lp46 perf]# ./perf test 67
  67: Parse and process metrics                             : Ok
  [root@t35lp46 perf]#

Committer notes:

As Ian remarks, this is not s390 specific:

<quote Ian>
  This also shows up with address sanitizer on all architectures
  (perhaps change the patch title) and perhaps add a "Fixes: <commit>"
  tag.

  =================================================================
  ==4718==ERROR: AddressSanitizer: global-buffer-overflow on address
  0x55c93b4d59e8 at pc 0x55c93a1541e2 bp 0x7ffd24327c60 sp
  0x7ffd24327c58
  READ of size 8 at 0x55c93b4d59e8 thread T0
      #0 0x55c93a1541e1 in find_metric tools/perf/util/metricgroup.c:764:2
      #1 0x55c93a153e6c in __resolve_metric tools/perf/util/metricgroup.c:844:9
      #2 0x55c93a152f18 in resolve_metric tools/perf/util/metricgroup.c:881:9
      #3 0x55c93a1528db in metricgroup__add_metric
  tools/perf/util/metricgroup.c:943:9
      #4 0x55c93a151996 in metricgroup__add_metric_list
  tools/perf/util/metricgroup.c:988:9
      #5 0x55c93a1511b9 in parse_groups tools/perf/util/metricgroup.c:1040:8
      #6 0x55c93a1513e1 in metricgroup__parse_groups_test
  tools/perf/util/metricgroup.c:1082:9
      #7 0x55c93a0108ae in __compute_metric tools/perf/tests/parse-metric.c:159:8
      #8 0x55c93a010744 in compute_metric tools/perf/tests/parse-metric.c:189:9
      #9 0x55c93a00f5ee in test_ipc tools/perf/tests/parse-metric.c:208:2
      #10 0x55c93a00f1e8 in test__parse_metric
  tools/perf/tests/parse-metric.c:345:2
      #11 0x55c939fd7202 in run_test tools/perf/tests/builtin-test.c:410:9
      #12 0x55c939fd6736 in test_and_print tools/perf/tests/builtin-test.c:440:9
      #13 0x55c939fd58c3 in __cmd_test tools/perf/tests/builtin-test.c:661:4
      #14 0x55c939fd4e02 in cmd_test tools/perf/tests/builtin-test.c:807:9
      #15 0x55c939e4763d in run_builtin tools/perf/perf.c:313:11
      #16 0x55c939e46475 in handle_internal_command tools/perf/perf.c:365:8
      #17 0x55c939e4737e in run_argv tools/perf/perf.c:409:2
      #18 0x55c939e45f7e in main tools/perf/perf.c:539:3

  0x55c93b4d59e8 is located 0 bytes to the right of global variable
  'pme_test' defined in 'tools/perf/tests/parse-metric.c:17:25'
  (0x55c93b4d54a0) of size 1352
  SUMMARY: AddressSanitizer: global-buffer-overflow
  tools/perf/util/metricgroup.c:764:2 in find_metric
  Shadow bytes around the buggy address:
    0x0ab9a7692ae0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x0ab9a7692af0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x0ab9a7692b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x0ab9a7692b10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x0ab9a7692b20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  =>0x0ab9a7692b30: 00 00 00 00 00 00 00 00 00 00 00 00 00[f9]f9 f9
    0x0ab9a7692b40: f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9
    0x0ab9a7692b50: f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9
    0x0ab9a7692b60: f9 f9 f9 f9 f9 f9 f9 f9 00 00 00 00 00 00 00 00
    0x0ab9a7692b70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x0ab9a7692b80: f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9
  Shadow byte legend (one shadow byte represents 8 application bytes):
    Addressable:           00
    Partially addressable: 01 02 03 04 05 06 07
    Heap left redzone:	   fa
    Freed heap region:	   fd
    Stack left redzone:	   f1
    Stack mid redzone:	   f2
    Stack right redzone:     f3
    Stack after return:	   f5
    Stack use after scope:   f8
    Global redzone:          f9
    Global init order:	   f6
    Poisoned by user:        f7
    Container overflow:	   fc
    Array cookie:            ac
    Intra object redzone:    bb
    ASan internal:           fe
    Left alloca redzone:     ca
    Right alloca redzone:    cb
    Shadow gap:              cc
</quote>

I'm also adding the missing "Fixes" tag and setting just .name to NULL,
as doing it that way is more compact (the compiler will zero out
everything else) and the table iterators look for .name being NULL as
the sentinel marking the end of the table.

Fixes: 0a507af9c6 ("perf tests: Add parse metric test for ipc metric")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20200825071211.16959-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-01 12:15:52 -03:00
Jin Yao
943b69ac18 perf parse-events: Set exclude_guest=1 for user-space counting
Currently if we run 'perf record -e cycles:u', exclude_guest=0.

But it doesn't make sense in most cases that we request for
user-space counting but we also get the guest report.

Of course, we also need to consider 'perf kvm' usage case that
authorized perf users on the host may only want to count guest user
space events. For example,

  # perf kvm --guest record -e cycles:u

When we have 'exclude_guest=1' for 'perf kvm' usage, we may get nothing
from guest events.

To keep perf semantics consistent and clear, this patch sets
exclude_guest=1 for user-space counting but except for 'perf kvm' usage.

Before:

  perf record -e cycles:u ./div
  perf evlist -v
  cycles:u: ..., exclude_kernel: 1, exclude_hv: 1, ...

After:
  perf record -e cycles:u ./div
  perf evlist -v
  cycles:u: ..., exclude_kernel: 1, exclude_hv: 1,  exclude_guest: 1, ...

Before:
  perf kvm --guest record -e cycles:u -vvv

perf_event_attr:

  size                             120
  { sample_period, sample_freq }   4000
  sample_type                      IP|TID|TIME|ID|CPU|PERIOD
  read_format                      ID
  disabled                         1
  inherit                          1
  exclude_kernel                   1
  exclude_hv                       1
  freq                             1
  sample_id_all                    1

After:

  perf kvm --guest record -e cycles:u -vvv

perf_event_attr:
  size                             120
  { sample_period, sample_freq }   4000
  sample_type                      IP|TID|TIME|ID|CPU|PERIOD
  read_format                      ID
  disabled                         1
  inherit                          1
  exclude_kernel                   1
  exclude_hv                       1
  freq                             1
  sample_id_all                    1

For Before/After, exclude_guest are both 0 for perf kvm usage.

perf test 6

 6: Parse event definition strings             : Ok

Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Like Xu <like.xu@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200814012120.16647-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-01 12:15:51 -03:00
Sumanth Korikkar
4b04e0decd perf test: Fix basic bpf filtering test
BPF basic filtering test fails on s390x (when vmlinux debuginfo is
utilized instead of /proc/kallsyms)

Info:
- bpf_probe_load installs the bpf code at do_epoll_wait.
- For s390x, do_epoll_wait resolves to 3 functions including inlines.
  found inline addr: 0x43769e
  Probe point found: __s390_sys_epoll_wait+6
  found inline addr: 0x437290
  Probe point found: do_epoll_wait+0
  found inline addr: 0x4375d6
  Probe point found: __se_sys_epoll_wait+6
- add_bpf_event  creates evsel for every probe in a BPF object. This
  results in 3 evsels.

Solution:
- Expected result = 50% of the samples to be collected from epoll_wait *
  number of entries present in the evlist.

Committer testing:

  # perf test 42
  42: BPF filter                                            :
  42.1: Basic BPF filtering                                 : Ok
  42.2: BPF pinning                                         : Ok
  42.3: BPF prologue generation                             : Ok
  42.4: BPF relocation checker                              : Ok
  #

Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Reviewed-by: Thomas Richter <tmricht@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: bpf@vger.kernel.org
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
LPU-Reference: 20200817072754.58344-1-sumanthk@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-08-21 10:22:23 -03:00
Michael Petlan
194cb6b50f perf test: Allow multiple probes in record+script_probe_vfs_getname.sh
Sometimes when adding a kprobe by perf, it results in multiple probe
points, such as the following:

  # ./perf probe -l
    probe:vfs_getname    (on getname_flags:73@fs/namei.c with pathname)
    probe:vfs_getname_1  (on getname_flags:73@fs/namei.c with pathname)
    probe:vfs_getname_2  (on getname_flags:73@fs/namei.c with pathname)
  # cat /sys/kernel/debug/tracing/kprobe_events
  p:probe/vfs_getname _text+5501804 pathname=+0(+0(%gpr31)):string
  p:probe/vfs_getname_1 _text+5505388 pathname=+0(+0(%gpr31)):string
  p:probe/vfs_getname_2 _text+5508396 pathname=+0(+0(%gpr31)):string

In this test, we need to record all of them and expect any of them in
the perf-script output, since it's not clear which one will be used for
the desired syscall:

  # perf stat -e probe:vfs_getname\* -- touch /tmp/nic

   Performance counter stats for 'touch /tmp/nic':

                31      probe:vfs_getname_2
                 0      probe:vfs_getname_1
                 1      probe:vfs_getname
       0.001421826 seconds time elapsed

       0.001506000 seconds user
       0.000000000 seconds sys

If the test relies only on probe:vfs_getname, it might easily miss the
relevant data.

Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
LPU-Reference: 20200722135845.29958-1-mpetlan@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-08-13 09:34:26 -03:00
Arnaldo Carvalho de Melo
b1aa3db2c1 Merge remote-tracking branch 'torvalds/master' into perf/core
Minor conflict in tools/perf/arch/arm/util/auxtrace.c as one fix there
was cherry-picked for the last perf/urgent pull req to Linus, so was
already there.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-08-03 09:37:31 -03:00
Thomas Richter
463538a383 perf tests: Fix test 68 zstd compression for s390
Commit 5aa98879ef ("s390/cpum_sf: prohibit callchain data collection")
prohibits call graph sampling for hardware events on s390. The
information recorded is out of context and does not match.

On s390 this commit now breaks test case 68 Zstd perf.data
compression/decompression.

Therefore omit call graph sampling on s390 in this test.

Output before:
  [root@t35lp46 perf]# ./perf test -Fv 68
  68: Zstd perf.data compression/decompression              :
  --- start ---
  Collecting compressed record file:
  Error:
  cycles: PMU Hardware doesn't support sampling/overflow-interrupts.
                                Try 'perf stat'
  ---- end ----
  Zstd perf.data compression/decompression: FAILED!
  [root@t35lp46 perf]#

Output after:
[root@t35lp46 perf]# ./perf test -Fv 68
  68: Zstd perf.data compression/decompression              :
  --- start ---
  Collecting compressed record file:
  500+0 records in
  500+0 records out
  256000 bytes (256 kB, 250 KiB) copied, 0.00615638 s, 41.6 MB/s
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.004 MB /tmp/perf.data.X3M,
                        compressed (original 0.002 MB, ratio is 3.609) ]
  Checking compressed events stats:
  # compressed : Zstd, level = 1, ratio = 4
        COMPRESSED events:          1
  2ELIFREPh---- end ----
  Zstd perf.data compression/decompression: Ok
  [root@t35lp46 perf]#

Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20200729135314.91281-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-31 09:27:32 -03:00
Jiri Olsa
dfce77c580 perf metric: Add metric group test
Adding test for metric group plus compute_metric_group function to get
metrics values within the group.

Committer notes:

Fixed this;

  tests/parse-metric.c:327:7: error: missing field 'val' initializer [-Werror,-Wmissing-field-initializers]
                  { 0 },
                      ^

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200719181320.785305-18-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-30 07:01:50 -03:00
Jiri Olsa
b81ef466ac perf metric: Make compute_single function more precise
So far compute_single function relies on the fact, that there's only
single metric defined within evlist in all tests. In following patch we
will add test for metric group, so we need to be able to compute metric
by given name.

Adding the name argument to compute_single and iterating evlist and
evsel's expression to find the given metric.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200719181320.785305-17-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-30 07:01:50 -03:00
Jiri Olsa
f6fb0960f9 perf metric: Add recursion check when processing nested metrics
Keeping the stack of nested metrics via 'struct expr_id' objects
and checking if we are in recursion via already processed metric.

The stack is implemented as static array within the struct egroup
with 100 entries, which should be enough nesting depth for any
metric we have or plan to have at the moment.

Adding test that simulates the recursion and checks we can
detect it.

Committer notes:

Bumped RECURSION_ID_MAX to 1000 as per Jiri's reply to Paul Clark on the
patch series e-mail discussion.

Fixed these:

  tests/parse-metric.c:308:7: error: missing field 'val' initializer [-Werror,-Wmissing-field-initializers]
                  { 0 },
                      ^

  util/metricgroup.c:924:28: error: missing field 'parent' initializer [-Werror,-Wmissing-field-initializers]
          struct expr_ids ids = { 0 };
                                    ^
  util/metricgroup.c:924:26: error: suggest braces around initialization of subobject [-Werror,-Wmissing-braces]
          struct expr_ids ids = { 0 };
                                  ^
                                  {}
  util/metricgroup.c:924:26: error: suggest braces around initialization of subobject [-Werror,-Wmissing-braces]
          struct expr_ids ids = { 0 };
                                  ^
                                  {}
  util/metricgroup.c:924:28: error: missing field 'cnt' initializer [-Werror,-Wmissing-field-initializers]
          struct expr_ids ids = { 0 };
                                    ^

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200719181320.785305-16-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-30 07:01:49 -03:00
Jiri Olsa
5a606f3b9c perf metric: Add DCache_L2 to metric parse test
Adding test that compute DCache_L2 metrics with other related metrics in it.

Committer notes:

Fixed up this:

  tests/parse-metric.c:285:7: error: missing field 'val' initializer [-Werror,-Wmissing-field-initializers]
                  { 0 },
                      ^

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200719181320.785305-15-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-30 07:01:49 -03:00
Jiri Olsa
55f30d6839 perf metric: Add cache_miss_cycles to metric parse test
Adding test that compute metric with other metrics in it.

  cache_miss_cycles = metric:dcache_miss_cpi + metric:icache_miss_cycles

Committer notes:

Fixed up initializer to cope with:

  tests/parse-metric.c:242:7: error: missing field 'val' initializer [-Werror,-Wmissing-field-initializers]
                  { 0 },

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200719181320.785305-14-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-30 07:01:49 -03:00
Ian Rogers
1b98c6e3ba perf test: Ensure sample_period is set libpfm4 events
Test that a command line option doesn't override the period set on a
libpfm4 event.

Without libpfm4 test passes as unsupported.

Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200728085734.609930-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-30 07:01:49 -03:00
Jiri Olsa
4929e95a14 perf tools: Fix term parsing for raw syntax
Jin Yao reported issue with possible conflict between raw events and
term values in pmu event syntax.

Currently following syntax is resolved as raw event with 0xead value:

  uncore_imc_free_running/read/

instead of using 'read' term from uncore_imc_free_running pmu, because
'read' is correct raw event syntax with 0xead value.

To solve this issue we do following:

  - check existing terms during rXXXX syntax processing
    and make them priority in case of conflict

  - allow pmu/r0x1234/ syntax to be able to specify conflicting
    raw event (implemented in previous patch)

Also add automated tests for this and perf_pmu__parse_cleanup call to
parse_events_terms, so the test gets properly cleaned up.

Fixes: 3a6c51e4d6 ("perf parser: Add support to specify rXXX event with pmu")
Reported-by: Jin Yao <yao.jin@linux.intel.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20200726075244.1191481-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-30 07:01:48 -03:00
Jiri Olsa
c33cdf5411 perf tools: Allow r0x<HEX> event syntax
Add support to specify raw event with 'r0<HEX>' syntax within pmu term
syntax like:

  -e cpu/r0xdead/

It will be used to specify raw events in cases where they conflict with
real pmu terms, like 'read', which is valid raw event syntax, but also a
possible pmu term name as reported by Jin Yao.

Reported-by: Jin Yao <yao.jin@linux.intel.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20200725121959.1181869-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-30 07:01:48 -03:00
Alexey Budankov
ab4c1f9f68 libperf: Add flags to fdarray fds objects
Store flags per struct pollfd *entries object in a bitmap of int size.

Implement fdarray_flag__nonfilterable flag to skip object from counting
by fdarray__filter().

Fixed fdarray test issue reported by kernel test robot.

Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/6b7d43ff-0801-d5dd-4e90-fcd86b17c1c8@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-21 09:52:51 -03:00
Alexey Budankov
59b4412f27 libperf: Avoid internal moving of fdarray fds
Avoid moving of fds by fdarray__filter() so fds indices returned by
fdarray__add() can be used for access and processing of objects at
struct pollfd *entries.

Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/676844f8-55d3-c628-23db-aa163a81519e@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-21 08:49:30 -03:00
Jiri Olsa
070b3b5ad7 perf metric: Add 'struct expr_id_data' to keep expr value
Add 'struct expr_id_data' to keep an expr value instead of just a simple
double pointer, so we can store more data for ID in the following
changes.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200712132634.138901-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-17 09:09:48 -03:00
Jiri Olsa
2c46f54249 perf metric: Rename expr__add_id() to expr__add_val()
Rename expr__add_id() to expr__add_val() so we can use expr__add_id() to
actually add just the id without any value in following changes.

There's no functional change.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200712132634.138901-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-17 09:09:48 -03:00
Adrian Hunter
7eeb9855c1 perf script: Show text poke address symbol
It is generally more useful to show the symbol with an address. In this
case, the print function requires the 'machine' which means changing
callers to provide it as a parameter. It is optional because most events
do not need it and the callers that matter can provide it.

Committer notes:

Made 'union perf_event' continue to be the first parameter to the
perf_event__fprintf() and perf_event__fprintf_text_poke() events.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: x86@kernel.org
Link: http://lore.kernel.org/lkml/20200512121922.8997-16-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-10 08:39:14 -03:00
Arnaldo Carvalho de Melo
d1f249ecbd perf evlist: Fix the class prefix for 'struct evlist' strerror methods
To differentiate from libperf's 'struct perf_evlist' methods.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-06-22 16:28:09 -03:00
Ian Rogers
ff1a12f962 perf expr: Add < and > operators
These are broadly useful but required to handle TMA metrics. For example
encoding Ports_Utilization from:

  https://download.01.org/perfmon/TMA_Metrics.csv

requires '<'.

  {
    "BriefDescription": "This metric estimates fraction of cycles the CPU performance was potentially limited due to Core computation issues (non divider-related).  Two distinct categories can be attributed into this metric: (1) heavy data-dependency among contiguous instructions would manifest in this metric - such cases are often referred to as low Instruction Level Parallelism (ILP). (2) Contention on some hardware execution unit other than Divider. For example; when there are too many multiply operations.",
    "MetricExpr": "( ( cpu@EXE_ACTIVITY.EXE_BOUND_0_PORTS@ + cpu@EXE_ACTIVITY.1_PORTS_UTIL@ + ( cpu@EXE_ACTIVITY.2_PORTS_UTIL@ * ( ( ( cpu@UOPS_RETIRED.RETIRE_SLOTS@ ) / ( cpu@CPU_CLK_UNHALTED.THREAD@ ) ) / ( ( 4.000000 ) + 1.000000 ) ) ) ) / ( cpu@CPU_CLK_UNHALTED.THREAD@ ) if ( cpu@ARITH.DIVIDER_ACTIVE\\,cmask\\=1@ < cpu@EXE_ACTIVITY.EXE_BOUND_0_PORTS@ ) else ( ( cpu@EXE_ACTIVITY.EXE_BOUND_0_PORTS@ + cpu@EXE_ACTIVITY.1_PORTS_UTIL@ + ( cpu@EXE_ACTIVITY.2_PORTS_UTIL@ * ( ( ( cpu@UOPS_RETIRED.RETIRE_SLOTS@ ) / ( cpu@CPU_CLK_UNHALTED.THREAD@ ) ) / ( ( 4.000000 ) + 1.000000 ) ) ) ) - cpu@EXE_ACTIVITY.EXE_BOUND_0_PORTS@ ) / ( cpu@CPU_CLK_UNHALTED.THREAD@ ) )",
    "MetricGroup": "Topdown_Group_Ports_Utilization",
    "MetricName": "Topdown_Metric_Ports_Utilization"
  },

Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200610235823.52557-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-06-22 16:28:09 -03:00
Ian Rogers
3e21a28a01 perf expr: Add d_ratio operation
d_ratio avoids division by 0 yielding infinity, such as when a counter
doesn't get scheduled. An example usage is:

  {
      "BriefDescription": "DCache L1 misses",
      "MetricExpr": "d_ratio(MEM_LOAD_RETIRED.L1_MISS, MEM_LOAD_RETIRED.L1_HIT + MEM_LOAD_RETIRED.L1_MISS + MEM_LOAD_RETIRED.FB_HIT)",
      "MetricGroup": "DCache;DCache_L1",
      "MetricName": "DCache_L1_Miss",
      "ScaleUnit": "100%",
  }

Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200610235823.52557-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-06-22 16:28:09 -03:00
Jiri Olsa
218ca91df4 perf tests: Add parse metric test for frontend metric
Adding new metric test for frontend metric. It's stolen from x86 pmu
events.

Committer testing:

  # perf test "Parse and process metrics"
  67: Parse and process metrics                             : Ok
  # perf test -v "Parse and process metrics"
  #
  67: Parse and process metrics                             :
  --- start ---
  test child forked, pid 104881
  metric expr inst_retired.any / cpu_clk_unhalted.thread for IPC
  found event inst_retired.any
  found event cpu_clk_unhalted.thread
  adding {inst_retired.any,cpu_clk_unhalted.thread}:W
  metric expr idq_uops_not_delivered.core / (4 * (( ( cpu_clk_unhalted.thread / 2 ) * ( 1 + cpu_clk_unhalted.one_thread_active / cpu_clk_unhalted.ref_xclk ) ))) for Frontend_Bound_SMT
  found event cpu_clk_unhalted.one_thread_active
  found event cpu_clk_unhalted.ref_xclk
  found event idq_uops_not_delivered.core
  found event cpu_clk_unhalted.thread
  adding {cpu_clk_unhalted.one_thread_active,cpu_clk_unhalted.ref_xclk,idq_uops_not_delivered.core,cpu_clk_unhalted.thread}:W
  test child finished with 0
  ---- end ----
  Parse and process metrics: Ok
  #

Had to fix it to initialize that 'struct value' array sentinel with a
named initializer to fix the build with some versions of clang:

  tests/parse-metric.c:154:7: error: missing field 'val' initializer [-Werror,-Wmissing-field-initializers]
                { 0 },

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200602214741.1218986-14-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-06-22 16:28:09 -03:00
Jiri Olsa
0a507af9c6 perf tests: Add parse metric test for ipc metric
Adding new test that process metrics code and checks the expected
results. Starting with easy ipc metric.

Committer testing:

  # perf test "Parse and process metrics"
  67: Parse and process metrics                             : Ok
  #
  # perf test -v "Parse and process metrics"
  67: Parse and process metrics                             :
  --- start ---
  test child forked, pid 103402
  metric expr inst_retired.any / cpu_clk_unhalted.thread for IPC
  found event inst_retired.any
  found event cpu_clk_unhalted.thread
  adding {inst_retired.any,cpu_clk_unhalted.thread}:W
  test child finished with 0
  ---- end ----
  Parse and process metrics: Ok
  #

Had to fix it to initialize that 'struct value' array sentinel with a
named initializer to fix the build with some versions of clang:

  tests/parse-metric.c:135:7: error: missing field 'val' initializer [-Werror,-Wmissing-field-initializers]
                { 0 },

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200602214741.1218986-13-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-06-22 16:28:09 -03:00
Jiri Olsa
e1c92a7fbb perf tests: Add another metric parsing test
The test goes through all metrics compiled for arch within pmu events
and try to parse them.

This test is different from 'test_parsing' in that we go through all the
events in the current arch, not just one defined for current CPU model.
Using 'fake_pmu' to parse events which do not have PMUs defined in the
system.

Say there's bad change in ivybridge metrics file, like:

  - a/tools/perf/pmu-events/arch/x86/ivybridge/ivb-metrics.json
  + b/tools/perf/pmu-events/arch/x86/ivybridge/ivb-metrics.json
  @@ -8,7 +8,7 @@
  -        "MetricExpr": "IDQ_UOPS_NOT_DELIVERED.CORE / (4 * ((
  +        "MetricExpr": "IDQ_UOPS_NOT_DELIVERED.CORE / / (4 *

the test fails with (on my kabylake laptop):

  $ perf test 'Parsing of PMU event table metrics with fake PMUs' -v
  parsing 'idq_uops_not_delivered.core / / (4 * (( ( cpu_clk_unh...
  syntax error, line 1
  expr__parse failed
  test child finished with -1
  ...

The test also defines its own list of metrics and tries to parse them.
It's handy for developing.

Committer notes:

Testing it:

  $ perf test fake
  10: PMU events                                            :
  10.4: Parsing of PMU event table metrics with fake PMUs   : FAILED!
  $ perf test -v fake |& tail
  parsing '(unc_p_freq_trans_cycles / unc_p_clockticks) * 100.'
  parsing '(unc_m_power_channel_ppd / unc_m_clockticks) * 100.'
  parsing '(unc_m_power_critical_throttle_cycles / unc_m_clockticks) * 100.'
  parsing '(unc_m_power_self_refresh / unc_m_clockticks) * 100.'
  parsing 'idq_uops_not_delivered.core / * (4 * cycles)'
  syntax error
  expr__parse failed
  test child finished with -1
  ---- end ----
  PMU events subtest 4: FAILED!
  $

And fix this error:

  tests/pmu-events.c:437:40: error: missing field 'idx' initializer [-Werror,-Wmissing-field-initializers]
        struct parse_events_error error = { 0 };

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200602214741.1218986-5-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-06-22 16:28:08 -03:00
Jiri Olsa
34bacc9578 perf tests: Factor check_parse_id function
Separating the generic part of check_parse_id function,
so it can be used in following changes for the new test.

Committer notes:

Fix this error:

  tests/pmu-events.c:413:40: error: missing field 'idx' initializer [-Werror,-Wmissing-field-initializers]
        struct parse_events_error error = { 0 };

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200602214741.1218986-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-06-22 16:28:08 -03:00
Ian Rogers
0fb0d615f3 perf test: Initialize memory in dwarf-unwind
Avoid a false positive caused by assembly code in arch/x86.

In tests, zero the perf_event to avoid uninitialized memory uses.

Warnings were caught using clang with -fsanitize=memory.

Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: clang-built-linux@googlegroups.com
Link: http://lore.kernel.org/lkml/20200530082015.39162-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-06-01 12:24:23 -03:00
Ian Rogers
8617e2e34f perf tests: Don't tail call optimize in unwind test
The tail call optimization can unexpectedly make the stack smaller and
cause the test to fail.

Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: clang-built-linux@googlegroups.com
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200530082015.39162-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-06-01 12:24:23 -03:00
Arnaldo Carvalho de Melo
9300acc6fe perf build: Add a LIBPFM4=1 build test entry
So that when one runs:

  $ make -C tools/perf build-test

We make sure that recent changes don't break that opt-in build.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Igor Lubashev <ilubashe@akamai.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Jiwei Sun <jiwei.sun@windriver.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yonghong Song <yhs@fb.com>
Cc: yuzhoujian <yuzhoujian@didichuxing.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-05-29 16:51:38 -03:00
Stephane Eranian
7094349078 perf tools: Add optional support for libpfm4
This patch links perf with the libpfm4 library if it is available and
LIBPFM4 is passed to the build. The libpfm4 library contains hardware
event tables for all processors supported by perf_events. It is a helper
library that helps convert from a symbolic event name to the event
encoding required by the underlying kernel interface. This library is
open-source and available from: http://perfmon2.sf.net.

With this patch, it is possible to specify full hardware events by name.
Hardware filters are also supported. Events must be specified via the
--pfm-events and not -e option. Both options are active at the same time
and it is possible to mix and match:

  $ perf stat --pfm-events inst_retired:any_p:c=1:i -e cycles ....

One needs to explicitely ask for its inclusion by using the LIBPFM4 make
command line option, ie its opt-in rather than opt-out of feature
detection and build support.

Signed-off-by: Stephane Eranian <eranian@google.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Igor Lubashev <ilubashe@akamai.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Jiwei Sun <jiwei.sun@windriver.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: yuzhoujian <yuzhoujian@didichuxing.com>
Link: http://lore.kernel.org/lkml/20200505182943.218248-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-05-29 16:51:38 -03:00
Arnaldo Carvalho de Melo
60da3a12c5 perf build: Add NO_SDT=1 to the default set of build tests
We forgot to add it, so one would have to explicitely ask for it to be
run, fix that by adding it to the set of tests that are performed by
default when one does:

  $ make -C tools/perf build-test

It was being exercised only in the make_minimal test, this patch makes
it be tested in isolation, i.e. disabling only this feature.

Fixes: e26e63be64 ("perf build: Add sdt feature detection")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-05-29 16:51:38 -03:00
Arnaldo Carvalho de Melo
69fbadbe98 perf build: Add NO_LIBCRYPTO=1 to the default set of build tests
We forgot to add it, so one would have to explicitely ask for it to be
run, fix that by adding it to the set of tests that are performed by
default when one does:

  $ make -C tools/perf build-test

It was being exercised only in the make_minimal test, this patch makes
it be tested in isolation, i.e. disabling only this feature.

Fixes: 8ee4646038 ("perf build: Add libcrypto feature detection")
Cc: Stephane Eranian <eranian@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-05-29 16:51:38 -03:00
Arnaldo Carvalho de Melo
5bc7aac3e7 perf build: Add NO_SYSCALL_TABLE=1 to the build tests
So that we make sure that even on x86-64 and other architectures where
that is the default method we test build the fallback to libaudit that
other architectures use.

I.e. now this line got added to:

  $ make -C tools/perf build-test
  <SNIP>
       make_no_syscall_tbl_O: cd . && make NO_SYSCALL_TABLE=1 FEATURES_DUMP=/home/acme/git/perf/tools/perf/BUILD_TEST_FEATURE_DUMP -j12 O=/tmp/tmp.W0HtKR1mfr DESTDIR=/tmp/tmp.lNezgCVPzW
  <SNIP>
  $

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-05-29 16:51:16 -03:00
Nick Gasson
525c821de0 perf tests: Add test for the java demangler
Split from a larger patch that was also fixing a problem with the java
demangler, so, before applying that patch we see:

  $ perf test java
  65: Demangle Java                                         : FAILED!
  $ perf test -v java
  65: Demangle Java                                         :
  --- start ---
  test child forked, pid 307264
  FAILED: Ljava/lang/StringLatin1;equals([B[B)Z: bool class java.lang.StringLatin1.equals(byte[], byte[]) != boolean java.lang.StringLatin1.equals(byte[], byte[])
  FAILED: Ljava/util/zip/ZipUtils;CENSIZ([BI)J: long class java.util.zip.ZipUtils.CENSIZ(byte[], int) != long java.util.zip.ZipUtils.CENSIZ(byte[], int)
  FAILED: Ljava/util/regex/Pattern$BmpCharProperty;match(Ljava/util/regex/Matcher;ILjava/lang/CharSequence;)Z: bool class java.util.regex.Pattern$BmpCharProperty.match(class java.util.regex.Matcher., int, class java.lang., charhar, shortequence) != boolean java.util.regex.Pattern$BmpCharProperty.match(java.util.regex.Matcher, int, java.lang.CharSequence)
  FAILED: Ljava/lang/AbstractStringBuilder;appendChars(Ljava/lang/String;II)V: void class java.lang.AbstractStringBuilder.appendChars(class java.lang., shorttring., int, int) != void java.lang.AbstractStringBuilder.appendChars(java.lang.String, int, int)
  FAILED: Ljava/lang/Object;<init>()V: void class java.lang.Object<init>() != void java.lang.Object<init>()
  test child finished with -1
  ---- end ----
  Demangle Java: FAILED!
  $

Next patch should fix this.

Signed-off-by: Nick Gasson <nick.gasson@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200427061520.24905-4-nick.gasson@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-05-28 10:03:28 -03:00
Jiri Olsa
d685e6c1b8 perf tests: Consider subtests when searching for user specified tests
It's now possible to put subtest name as a test filter:

  $ perf test 'PMU event table sanity'
  10: PMU events                                            :
  10.1: PMU event table sanity                              : Ok

Committer testing:

Before:

  $ perf test 'PMU event table sanity'
  $

After:

  $ perf test 'PMU event table sanity'
  10: PMU events                                            :
  10.1: PMU event table sanity                              : Ok
  $

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200524224219.234847-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-05-28 10:03:28 -03:00
Ian Rogers
a45badc739 perf expr: Allow numbers to be followed by a dot
Metrics like UNC_M_POWER_SELF_REFRESH encode 100 as "100." and
consequently the 100 is treated as a symbol. Alter the regular
expression to allow the dot to be before or after the number.

Note, this passed the pmu-events test as that tests the validity of a
number using strtod rather than lex code. strtod allows the dot after.

Add a test for this behavior.

Fixes: 26226a9772 (perf expr: Move expr lexer to flex)
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-05-28 10:03:27 -03:00
Ian Rogers
ded80bda8b perf expr: Migrate expr ids table to a hashmap
Use a hashmap between a char* string and a double* value. While bpf's
hashmap entries are size_t in size, we can't guarantee sizeof(size_t) >=
sizeof(double). Avoid a memory allocation when gathering ids by making
0.0 a special value encoded as NULL.

Original map suggestion by Andi Kleen:

  https://lore.kernel.org/lkml/20200224210308.GQ160988@tassilo.jf.intel.com/

and seconded by Jiri Olsa:

  https://lore.kernel.org/lkml/20200423112915.GH1136647@krava/

Committer notes:

There are fixes that need to land upstream before we can use libbpf's
headers, for now use our copy unconditionally, since the data structures
at this point are exactly the same, no problem.

When the fixes for libbpf's hashmap land upstream, we can fix this up.

Testing it:

Building with LIBBPF=1, i.e. the default:

  $ perf -vv | grep -i bpf
                     bpf: [ on  ]  # HAVE_LIBBPF_SUPPORT
  $ nm ~/bin/perf | grep -i libbpf_ | wc -l
  39
  $ nm ~/bin/perf | grep -i hashmap_ | wc -l
  17
  $

Explicitely building without LIBBPF:

  $ perf -vv | grep -i bpf
                     bpf: [ OFF ]  # HAVE_LIBBPF_SUPPORT
  $
  $ nm ~/bin/perf | grep -i libbpf_ | wc -l
  0
  $ nm ~/bin/perf | grep -i hashmap_ | wc -l
  9
  $

Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: kp singh <kpsingh@chromium.org>
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200515221732.44078-8-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-05-28 10:03:26 -03:00
Jiri Olsa
beb6420300 perf trace: Fix compilation error for make NO_LIBBPF=1 DEBUG=1
The perf compilation fails for NO_LIBBPF=1 DEBUG=1 with:

  $ make NO_LIBBPF=1 DEBUG=1
    BUILD:   Doing 'make -j8' parallel build
    CC       builtin-trace.o
    LD       perf-in.o
    LINK     perf
  /usr/bin/ld: perf-in.o: in function `trace__find_bpf_map_by_name':
  /home/jolsa/kernel/linux-perf/tools/perf/builtin-trace.c:4608: undefined reference to `bpf_object__find_map_by_name'
  collect2: error: ld returned 1 exit status
  make[2]: *** [Makefile.perf:631: perf] Error 1
  make[1]: *** [Makefile.perf:225: sub-make] Error 2
  make: *** [Makefile:70: all] Error 2

Move trace__find_bpf_map_by_name calls under HAVE_LIBBPF_SUPPORT ifdef
and add make test for this.

Committer notes:

Add missing:

  run += make_no_libbpf_DEBUG

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200518141027.3765877-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-05-28 10:03:26 -03:00
Ian Rogers
06392aaad5 perf test: Improve pmu event metric testing
Break pmu-events test into 2 and add a test to verify that all pmu
metric expressions simply parse. Try to parse all metric ids/events,
skip/warn if metrics for the current architecture fail to parse. To
support warning for a skip, and an ability for a subtest to describe why
it skips.

Tested on power9, skylakex, haswell, broadwell, westmere, sandybridge and
ivybridge.

May skip/warn on other architectures if metrics are invalid. In
particular s390 is untested, but its expressions are trivial. The
untested architectures with expressions are power8, cascadelakex,
tremontx, skylake, jaketown, ivytown and variants of haswell and
broadwell.

v3. addresses review comments from John Garry <john.garry@huawei.com>,
Jiri Olsa <jolsa@redhat.com> and Arnaldo Carvalho de Melo
<acme@kernel.org>.
v2. changes the commit message as event parsing errors no longer cause
the test to fail.

Committer notes:

Check the return value of strtod() to fix the build in systems where
that function is declared with attribute warn_unused_result.

Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200513212933.41273-1-irogers@google.com
[ split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-05-28 10:03:26 -03:00
Ian Rogers
3b536651ee perf test: Provide a subtest callback to ask for the reason for skipping a subtest
Now subtests can inform why a test was skipped. The upcoming patch
improvint PMU event metric testing will use it.

Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200513212933.41273-1-irogers@google.com
[ split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-05-28 10:03:26 -03:00
Ian Rogers
4ac22b484d perf parse-events: Make add PMU verbose output clearer
On a CPU like skylakex an uncore_iio_0 PMU may alias with
uncore_iio_free_running_0. The latter PMU doesn't support fc_mask as a
parameter and so pmu_config_term fails. Typically parse_events_add_pmu
is called in a loop where if one alias succeeds errors are ignored,
however, if multiple errors occur parse_events__handle_error will
currently give a WARN_ONCE.

This change removes the WARN_ONCE in parse_events__handle_error and
makes it a pr_debug. It adds verbose messages to parse_events_add_pmu
warning that non-fatal errors may occur, while giving details on the pmu
and config terms for useful context. pmu_config_term is altered so the
failing term and pmu are present in the case of the 'unknown term' error
which makes spotting the free_running case more straightforward.

Before:

  $ perf --debug verbose=3 stat -M llc_misses.pcie_read sleep 1
  Using CPUID GenuineIntel-6-55-4
  metric expr unc_iio_data_req_of_cpu.mem_read.part0 + unc_iio_data_req_of_cpu.mem_read.part1 + unc_iio_data_req_of_cpu.mem_read.part2 + unc_iio_data_req_of_cpu.mem_read.part3 for LLC_MISSES.PCIE_READ
  found event unc_iio_data_req_of_cpu.mem_read.part0
  found event unc_iio_data_req_of_cpu.mem_read.part1
  found event unc_iio_data_req_of_cpu.mem_read.part2
  found event unc_iio_data_req_of_cpu.mem_read.part3
  metric expr unc_iio_data_req_of_cpu.mem_read.part0 + unc_iio_data_req_of_cpu.mem_read.part1 + unc_iio_data_req_of_cpu.mem_read.part2 + unc_iio_data_req_of_cpu.mem_read.part3 for LLC_MISSES.PCIE_READ
  found event unc_iio_data_req_of_cpu.mem_read.part0
  found event unc_iio_data_req_of_cpu.mem_read.part1
  found event unc_iio_data_req_of_cpu.mem_read.part2
  found event unc_iio_data_req_of_cpu.mem_read.part3
  adding {unc_iio_data_req_of_cpu.mem_read.part0,unc_iio_data_req_of_cpu.mem_read.part1,unc_iio_data_req_of_cpu.mem_read.part2,unc_iio_data_req_of_cpu.mem_read.part3}:W,{unc_iio_data_req_of_cpu.mem_read.part0,unc_iio_data_req_of_cpu.mem_read.part1,unc_iio_data_req_of_cpu.mem_read.part2,unc_iio_data_req_of_cpu.mem_read.part3}:W
  intel_pt default config: tsc,mtc,mtc_period=3,psb_period=3,pt,branch
  WARNING: multiple event parsing errors
  ...
  Invalid event/parameter 'fc_mask'
  ...

After:

  $ perf --debug verbose=3 stat -M llc_misses.pcie_read sleep 1
  Using CPUID GenuineIntel-6-55-4
  metric expr unc_iio_data_req_of_cpu.mem_read.part0 + unc_iio_data_req_of_cpu.mem_read.part1 + unc_iio_data_req_of_cpu.mem_read.part2 + unc_iio_data_req_of_cpu.mem_read.part3 for LLC_MISSES.PCIE_READ
  found event unc_iio_data_req_of_cpu.mem_read.part0
  found event unc_iio_data_req_of_cpu.mem_read.part1
  found event unc_iio_data_req_of_cpu.mem_read.part2
  found event unc_iio_data_req_of_cpu.mem_read.part3
  metric expr unc_iio_data_req_of_cpu.mem_read.part0 + unc_iio_data_req_of_cpu.mem_read.part1 + unc_iio_data_req_of_cpu.mem_read.part2 + unc_iio_data_req_of_cpu.mem_read.part3 for LLC_MISSES.PCIE_READ
  found event unc_iio_data_req_of_cpu.mem_read.part0
  found event unc_iio_data_req_of_cpu.mem_read.part1
  found event unc_iio_data_req_of_cpu.mem_read.part2
  found event unc_iio_data_req_of_cpu.mem_read.part3
  adding {unc_iio_data_req_of_cpu.mem_read.part0,unc_iio_data_req_of_cpu.mem_read.part1,unc_iio_data_req_of_cpu.mem_read.part2,unc_iio_data_req_of_cpu.mem_read.part3}:W,{unc_iio_data_req_of_cpu.mem_read.part0,unc_iio_data_req_of_cpu.mem_read.part1,unc_iio_data_req_of_cpu.mem_read.part2,unc_iio_data_req_of_cpu.mem_read.part3}:W
  intel_pt default config: tsc,mtc,mtc_period=3,psb_period=3,pt,branch
  Attempting to add event pmu 'uncore_iio_free_running_5' with 'unc_iio_data_req_of_cpu.mem_read.part0,' that may result in non-fatal errors
  After aliases, add event pmu 'uncore_iio_free_running_5' with 'fc_mask,ch_mask,umask,event,' that may result in non-fatal errors
  Attempting to add event pmu 'uncore_iio_free_running_3' with 'unc_iio_data_req_of_cpu.mem_read.part0,' that may result in non-fatal errors
  After aliases, add event pmu 'uncore_iio_free_running_3' with 'fc_mask,ch_mask,umask,event,' that may result in non-fatal errors
  Attempting to add event pmu 'uncore_iio_free_running_1' with 'unc_iio_data_req_of_cpu.mem_read.part0,' that may result in non-fatal errors
  After aliases, add event pmu 'uncore_iio_free_running_1' with 'fc_mask,ch_mask,umask,event,' that may result in non-fatal errors
  Multiple errors dropping message: unknown term 'fc_mask' for pmu 'uncore_iio_free_running_3' (valid terms: event,umask,config,config1,config2,name,period,percore)
  ...

  So before you see a 'WARNING: multiple event parsing errors' and
  'Invalid event/parameter'. After you see 'Attempting... that may result
  in non-fatal errors' then 'Multiple errors...' with details that
  'fc_mask' wasn't known to a free running counter. While not completely
  clean, this makes it clearer that an error hasn't really occurred.

v2. addresses review feedback from Jiri Olsa <jolsa@redhat.com>.

Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lore.kernel.org/lkml/20200513220635.54700-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-05-28 10:03:26 -03:00
Ian Rogers
63f11355a6 perf expr: Test parsing of floating point numbers
Add test for fix in:
commit 5741da3dee4c ("perf expr: Parse numbers as doubles")

Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200513062752.3681-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-05-28 10:03:26 -03:00
Ian Rogers
0a892c1c94 perf record: Add dummy event during system wide synthesis
During the processing of /proc during event synthesis new processes may
start. Add a dummy event if /proc is to be processed, to capture mmaps
for starting processes. This reuses the existing logic for
initial-delay.

v3 fixes the attr test of test-record-C0
v2 fixes the dummy event configuration and a branch stack issue.

Suggested-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200422173615.59436-1-irogers@google.com
[ split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-05-28 10:03:25 -03:00
Arnaldo Carvalho de Melo
7d1e239e91 perf counts: Rename perf_evsel__*counts() to evsel__*counts()
As these are 'struct evsel' methods, not part of tools/lib/perf/, aka
libperf, to whom the perf_ prefix belongs.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-05-28 10:03:24 -03:00
Arnaldo Carvalho de Melo
c64e85e14b perf evsel: Rename perf_evsel__[hs]w_cache* to evsel__[hs]w_cache*
As those are 'struct evsel' methods, not part of tools/lib/perf/, aka
libperf, to whom the perf_ prefix belongs.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-05-28 10:03:24 -03:00
Arnaldo Carvalho de Melo
8f6725a2c9 perf evsel: Rename perf_evsel__new*() to evsel__new*()
As these are 'struct evsel' methods, not part of tools/lib/perf/, aka
libperf, to whom the perf_ prefix belongs.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-05-28 10:03:24 -03:00
Arnaldo Carvalho de Melo
10c513f798 perf evsel: Rename perf_evsel__resort*() to evsel__resort*()
As it is a 'struct evsel' method, not part of tools/lib/perf/, aka
libperf, to whom the perf_ prefix belongs.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-05-28 10:03:24 -03:00