Commit Graph

717 Commits

Author SHA1 Message Date
Linus Torvalds
0429fbc0bd Merge branch 'for-3.18-consistent-ops' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
Pull percpu consistent-ops changes from Tejun Heo:
 "Way back, before the current percpu allocator was implemented, static
  and dynamic percpu memory areas were allocated and handled separately
  and had their own accessors.  The distinction has been gone for many
  years now; however, the now duplicate two sets of accessors remained
  with the pointer based ones - this_cpu_*() - evolving various other
  operations over time.  During the process, we also accumulated other
  inconsistent operations.

  This pull request contains Christoph's patches to clean up the
  duplicate accessor situation.  __get_cpu_var() uses are replaced with
  with this_cpu_ptr() and __this_cpu_ptr() with raw_cpu_ptr().

  Unfortunately, the former sometimes is tricky thanks to C being a bit
  messy with the distinction between lvalues and pointers, which led to
  a rather ugly solution for cpumask_var_t involving the introduction of
  this_cpu_cpumask_var_ptr().

  This converts most of the uses but not all.  Christoph will follow up
  with the remaining conversions in this merge window and hopefully
  remove the obsolete accessors"

* 'for-3.18-consistent-ops' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (38 commits)
  irqchip: Properly fetch the per cpu offset
  percpu: Resolve ambiguities in __get_cpu_var/cpumask_var_t -fix
  ia64: sn_nodepda cannot be assigned to after this_cpu conversion. Use __this_cpu_write.
  percpu: Resolve ambiguities in __get_cpu_var/cpumask_var_t
  Revert "powerpc: Replace __get_cpu_var uses"
  percpu: Remove __this_cpu_ptr
  clocksource: Replace __this_cpu_ptr with raw_cpu_ptr
  sparc: Replace __get_cpu_var uses
  avr32: Replace __get_cpu_var with __this_cpu_write
  blackfin: Replace __get_cpu_var uses
  tile: Use this_cpu_ptr() for hardware counters
  tile: Replace __get_cpu_var uses
  powerpc: Replace __get_cpu_var uses
  alpha: Replace __get_cpu_var
  ia64: Replace __get_cpu_var uses
  s390: cio driver &__get_cpu_var replacements
  s390: Replace __get_cpu_var uses
  mips: Replace __get_cpu_var uses
  MIPS: Replace __get_cpu_var uses in FPU emulator.
  arm: Replace __this_cpu_ptr with raw_cpu_ptr
  ...
2014-10-15 07:48:18 +02:00
Linus Torvalds
afa3536be8 Merge branch 'timers-nohz-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Ingo Molnar:
 "Main changes:

  - Fix the deadlock reported by Dave Jones et al
  - Clean up and fix nohz_full interaction with arch abilities
  - nohz init code consolidation/cleanup"

* 'timers-nohz-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  nohz: nohz full depends on irq work self IPI support
  nohz: Consolidate nohz full init code
  arm64: Tell irq work about self IPI support
  arm: Tell irq work about self IPI support
  x86: Tell irq work about self IPI support
  irq_work: Force raised irq work to run on irq work interrupt
  irq_work: Introduce arch_irq_work_has_interrupt()
  nohz: Move nohz full init call to tick init
2014-10-09 06:30:57 -04:00
Chris Metcalf
78410af511 tile: add clock_gettime support to vDSO
This change adds support for clock_gettime with CLOCK_REALTIME
and CLOCK_MONOTONIC using vDSO.  It also updates the vdso
struct nomenclature used for the clocks to match the x86 code
to keep it easier to update going forward.

We also support the *_COARSE clockid_t, for apps that want speed
but aren't concerned about fine-grained timestamps; this saves
about 20 cycles per call (see http://lwn.net/Articles/342018/).

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Acked-by: John Stultz <john.stultz@linaro.org>
2014-10-02 13:56:07 -04:00
Chris Metcalf
94fb1afbcb tile: switch to using seqlocks for the vDSO time code
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2014-10-02 10:48:12 -04:00
Chris Metcalf
bceb7efa6a tile gxio: use better string copy primitive
Both strncpy and strlcpy suffer from the fact that they do
partial copies of strings into the destination when the target
buffer is too small.  This is frequently pointless since an
overflow of the target buffer may make the result invalid.

strncpy() makes it relatively hard to even detect the error
condition, and with strlcpy() you have to duplicate the buffer
size parameter to test to see if the result exceeds it.
By returning zero in the failure case, we both make testing
for it easy, and by simply not copying anything in that case,
we make it mandatory for callers to test the error code.

To catch lazy programmers who don't check, we also place a NUL at
the start of the destination buffer (if there is space) to
ensure that the result is an invalid string.

At some point it may make sense to promote strscpy() to
a global platform-independent function, but other than the
reviewers, no one was interested on LKML, so for now leave
the strscpy() function as file-static.

Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2014-10-02 10:19:34 -04:00
Kurt McAlpine
4cde4cc87a Removed repeated word in comments
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2014-10-02 10:19:34 -04:00
Chris Metcalf
3e24765d77 tilegx: Enable ARCH_SUPPORTS_ATOMIC_RMW
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2014-10-02 10:19:33 -04:00
Geert Uytterhoeven
454ac3ec3f tile: Remove tile-specific _sinitdata and _einitdata
Use standard __init_begin and __init_end instead.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2014-10-02 10:19:33 -04:00
Himangi Saraogi
367b9380b1 tile: use ARRAY_SIZE
ARRAY_SIZE is more concise to use when the size of an array is divided
by the size of its type or the size of its first element.

The semantic patch that makes this change is as follows:

// <smpl>
@i@
@@

@@
type T;
T[] E;
@@

- (sizeof(E)/sizeof(T))
+ ARRAY_SIZE(E)
// </smpl>

Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2014-10-02 10:19:32 -04:00
Peter Zijlstra
c5c38ef3d7 irq_work: Introduce arch_irq_work_has_interrupt()
The nohz full code needs irq work to trigger its own interrupt so that
the subsystem can work even when the tick is stopped.

Lets introduce arch_irq_work_has_interrupt() that archs can override to
tell about their support for this ability.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2014-09-13 18:38:07 +02:00
Pranith Kumar
e356030519 flush_icache_range: export symbol to fix build errors
Fix building errors occuring due to a missing export of
flush_icache_range() in

kisskb.ellerman.id.au/kisskb/buildresult/11677809/

ERROR: "flush_icache_range" [drivers/misc/lkdtm.ko] undefined!

Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Vineet Gupta <vgupta@synopsys.com>	[arc]
Acked-by: Richard Kuo <rkuo@codeaurora.org>	[hexagon]
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Chris Zankel <chris@zankel.net>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>	[xtensa]
Cc: Noam Camus <noamc@ezchip.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Zhigang Lu <zlu@tilera.com>		[tile]
Cc: Kirill Tkhai <tkhai@yandex.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-29 16:28:17 -07:00
Vivek Goyal
b41d34b46a kexec: remove CONFIG_KEXEC dependency on crypto
New system call depends on crypto.  As it did not have a separate config
option, CONFIG_KEXEC was modified to select CRYPTO and CRYPTO_SHA256.

But now previous patch introduced a new config option for new syscall.
So CONFIG_KEXEC does not require crypto.  Remove that dependency.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Shaun Ruffell <sruffell@digium.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-29 16:28:16 -07:00
Christoph Lameter
81829a9686 tile: Use this_cpu_ptr() for hardware counters
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-26 13:45:55 -04:00
Christoph Lameter
b4f501916c tile: Replace __get_cpu_var uses
__get_cpu_var() is used for multiple purposes in the kernel source. One of
them is address calculation via the form &__get_cpu_var(x).  This calculates
the address for the instance of the percpu variable of the current processor
based on an offset.

Other use cases are for storing and retrieving data from the current
processors percpu area.  __get_cpu_var() can be used as an lvalue when
writing data or on the right side of an assignment.

__get_cpu_var() is defined as :

#define __get_cpu_var(var) (*this_cpu_ptr(&(var)))

__get_cpu_var() always only does an address determination. However, store
and retrieve operations could use a segment prefix (or global register on
other platforms) to avoid the address calculation.

this_cpu_write() and this_cpu_read() can directly take an offset into a
percpu area and use optimized assembly code to read and write per cpu
variables.

This patch converts __get_cpu_var into either an explicit address
calculation using this_cpu_ptr() or into a use of this_cpu operations that
use the offset.  Thereby address calculations are avoided and less registers
are used when code is generated.

At the end of the patch set all uses of __get_cpu_var have been removed so
the macro is removed too.

The patch set includes passes over all arches as well. Once these operations
are used throughout then specialized macros can be defined in non -x86
arches as well in order to optimize per cpu access by f.e.  using a global
register that may be set to the per cpu base.

Transformations done to __get_cpu_var()

1. Determine the address of the percpu instance of the current processor.

	DEFINE_PER_CPU(int, y);
	int *x = &__get_cpu_var(y);

    Converts to

	int *x = this_cpu_ptr(&y);

2. Same as #1 but this time an array structure is involved.

	DEFINE_PER_CPU(int, y[20]);
	int *x = __get_cpu_var(y);

    Converts to

	int *x = this_cpu_ptr(y);

3. Retrieve the content of the current processors instance of a per cpu
variable.

	DEFINE_PER_CPU(int, y);
	int x = __get_cpu_var(y)

   Converts to

	int x = __this_cpu_read(y);

4. Retrieve the content of a percpu struct

	DEFINE_PER_CPU(struct mystruct, y);
	struct mystruct x = __get_cpu_var(y);

   Converts to

	memcpy(&x, this_cpu_ptr(&y), sizeof(x));

5. Assignment to a per cpu variable

	DEFINE_PER_CPU(int, y)
	__get_cpu_var(y) = x;

   Converts to

	__this_cpu_write(y, x);

6. Increment/Decrement etc of a per cpu variable

	DEFINE_PER_CPU(int, y);
	__get_cpu_var(y)++

   Converts to

	__this_cpu_inc(y)

Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-26 13:45:54 -04:00
Linus Torvalds
63b12bdb0d Merge branch 'signal-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/misc
Pull arch signal handling cleanup from Richard Weinberger:
 "This patch series moves all remaining archs to the get_signal(),
  signal_setup_done() and sigsp() functions.

  Currently these archs use open coded variants of the said functions.
  Further, unused parameters get removed from get_signal_to_deliver(),
  tracehook_signal_handler() and signal_delivered().

  At the end of the day we save around 500 lines of code."

* 'signal-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/misc: (43 commits)
  powerpc: Use sigsp()
  openrisc: Use sigsp()
  mn10300: Use sigsp()
  mips: Use sigsp()
  microblaze: Use sigsp()
  metag: Use sigsp()
  m68k: Use sigsp()
  m32r: Use sigsp()
  hexagon: Use sigsp()
  frv: Use sigsp()
  cris: Use sigsp()
  c6x: Use sigsp()
  blackfin: Use sigsp()
  avr32: Use sigsp()
  arm64: Use sigsp()
  arc: Use sigsp()
  sas_ss_flags: Remove nested ternary if
  Rip out get_signal_to_deliver()
  Clean up signal_delivered()
  tracehook_signal_handler: Remove sig, info, ka and regs
  ...
2014-08-09 09:58:12 -07:00
Vivek Goyal
12db5562e0 kexec: load and relocate purgatory at kernel load time
Load purgatory code in RAM and relocate it based on the location.
Relocation code has been inspired by module relocation code and purgatory
relocation code in kexec-tools.

Also compute the checksums of loaded kexec segments and store them in
purgatory.

Arch independent code provides this functionality so that arch dependent
bootloaders can make use of it.

Helper functions are provided to get/set symbol values in purgatory which
are used by bootloaders later to set things like stack and entry point of
second kernel etc.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: WANG Chao <chaowang@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08 15:57:32 -07:00
Andy Lutomirski
a6c19dfe39 arm64,ia64,ppc,s390,sh,tile,um,x86,mm: remove default gate area
The core mm code will provide a default gate area based on
FIXADDR_USER_START and FIXADDR_USER_END if
!defined(__HAVE_ARCH_GATE_AREA) && defined(AT_SYSINFO_EHDR).

This default is only useful for ia64.  arm64, ppc, s390, sh, tile, 64-bit
UML, and x86_32 have their own code just to disable it.  arm, 32-bit UML,
and x86_64 have gate areas, but they have their own implementations.

This gets rid of the default and moves the code into ia64.

This should save some code on architectures without a gate area: it's now
possible to inline the gate_area functions in the default case.

Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Acked-by: Nathan Lynch <nathan_lynch@mentor.com>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [in principle]
Acked-by: Richard Weinberger <richard@nod.at> [for um]
Acked-by: Will Deacon <will.deacon@arm.com> [for arm64]
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Nathan Lynch <Nathan_Lynch@mentor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08 15:57:27 -07:00
Alexey Dobriyan
d962c14483 proc: convert /proc/$PID/hardwall to seq_file interface
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08 15:57:23 -07:00
Linus Torvalds
33caee3992 Merge branch 'akpm' (patchbomb from Andrew Morton)
Merge incoming from Andrew Morton:
 - Various misc things.
 - arch/sh updates.
 - Part of ocfs2.  Review is slow.
 - Slab updates.
 - Most of -mm.
 - printk updates.
 - lib/ updates.
 - checkpatch updates.

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (226 commits)
  checkpatch: update $declaration_macros, add uninitialized_var
  checkpatch: warn on missing spaces in broken up quoted
  checkpatch: fix false positives for --strict "space after cast" test
  checkpatch: fix false positive MISSING_BREAK warnings with --file
  checkpatch: add test for native c90 types in unusual order
  checkpatch: add signed generic types
  checkpatch: add short int to c variable types
  checkpatch: add for_each tests to indentation and brace tests
  checkpatch: fix brace style misuses of else and while
  checkpatch: add --fix option for a couple OPEN_BRACE misuses
  checkpatch: use the correct indentation for which()
  checkpatch: add fix_insert_line and fix_delete_line helpers
  checkpatch: add ability to insert and delete lines to patch/file
  checkpatch: add an index variable for fixed lines
  checkpatch: warn on break after goto or return with same tab indentation
  checkpatch: emit a warning on file add/move/delete
  checkpatch: add test for commit id formatting style in commit log
  checkpatch: emit fewer kmalloc_array/kcalloc conversion warnings
  checkpatch: improve "no space after cast" test
  checkpatch: allow multiple const * types
  ...
2014-08-06 21:14:42 -07:00
Linus Torvalds
6b22df74f7 SCSI misc on 20140806
This patch set consists of the usual driver updates (ufs, storvsc, pm8001
 hpsa).  It also has removal of the user space target driver code (everyone is
 using LIO now), a partial PCI MSI-X update, more multi-queue updates,
 conversion to 64 bit LUNs (so we could theoretically cope with any LUN
 returned by a device) and placeholder support for the ZBC device type (Shingle
 drives), plus an assortment of minor updates and bug fixes.
 
 Signed-off-by: James Bottomley <JBottomley@Parallels.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJT4mS9AAoJEDeqqVYsXL0Mq34H/2AeXiM8GEVO3PIsBtF3TFZ9
 poJvAyb8t//+VwAIVLHU9wrssIrIcyvNQmNHH/InGt5rOaXwGQRsnEc73bBtot4b
 aC1t+hAnp2Ddvu6phmyUg7iY2GmQhAoZmeaj7krGIu2XgtLGiPg26eSsgk4Yv/U9
 cuULEuOc/UnTj3w5VK8SvpyXMybVF6oQhSrS1slOglfFwPTlTI/NHU9xo7Wc3qHT
 VifHXNphIvye5EH8zwtKX5p8qCrFW0pevJwyfPz7Hp2CTA9XYKx3SoeOh+n9F9ez
 udBBggg7Vb1tb4mPKUoZ78UrtCVdFSCmesBU/RJe7cIh8daKaO5MVr3WPSx2JhM=
 =yGai
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This patch set consists of the usual driver updates (ufs, storvsc,
  pm8001 hpsa).  It also has removal of the user space target driver
  code (everyone is using LIO now), a partial PCI MSI-X update, more
  multi-queue updates, conversion to 64 bit LUNs (so we could
  theoretically cope with any LUN returned by a device) and placeholder
  support for the ZBC device type (Shingle drives), plus an assortment
  of minor updates and bug fixes"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (143 commits)
  scsi: do not issue SCSI RSOC command to Promise Vtrak E610f
  vmw_pvscsi: Use pci_enable_msix_exact() instead of pci_enable_msix()
  pm8001: Fix invalid return when request_irq() failed
  lpfc: Remove superfluous call to pci_disable_msix()
  isci: Use pci_enable_msix_exact() instead of pci_enable_msix()
  bfa: Use pci_enable_msix_exact() instead of pci_enable_msix()
  bfa: Cleanup bfad_setup_intr() function
  bfa: Do not call pci_enable_msix() after it failed once
  fnic: Use pci_enable_msix_exact() instead of pci_enable_msix()
  scsi: use short driver name for per-driver cmd slab caches
  scsi_debug: support scsi-mq, queues and locks
  Drivers: add blist flags
  scsi: ufs: fix endianness sparse warnings
  scsi: ufs: make undeclared functions static
  bnx2i: Update driver version to 2.7.10.1
  pm8001: fix a memory leak in nvmd_resp
  pm8001: fix update_flash
  pm8001: fix a memory leak in flash_update
  pm8001: Cleaning up uninitialized variables
  pm8001: Fix to remove null pointer checks that could never happen
  ...
2014-08-06 20:10:32 -07:00
WANG Chao
f6f8ed4735 mm/vmalloc.c: clean up map_vm_area third argument
Currently map_vm_area() takes (struct page *** pages) as third argument,
and after mapping, it moves (*pages) to point to (*pages +
nr_mappped_pages).

It looks like this kind of increment is useless to its caller these
days.  The callers don't care about the increments and actually they're
trying to avoid this by passing another copy to map_vm_area().

The caller can always guarantee all the pages can be mapped into vm_area
as specified in first argument and the caller only cares about whether
map_vm_area() fails or not.

This patch cleans up the pointer movement in map_vm_area() and updates
its callers accordingly.

Signed-off-by: WANG Chao <chaowang@redhat.com>
Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06 18:01:19 -07:00
Richard Weinberger
b3707c7ed0 tile: Use get_signal() signal_setup_done()
Use the more generic functions get_signal() signal_setup_done()
for signal delivery.

Signed-off-by: Richard Weinberger <richard@nod.at>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
2014-08-06 13:03:20 +02:00
Linus Torvalds
e7fda6c4c3 Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer and time updates from Thomas Gleixner:
 "A rather large update of timers, timekeeping & co

   - Core timekeeping code is year-2038 safe now for 32bit machines.
     Now we just need to fix all in kernel users and the gazillion of
     user space interfaces which rely on timespec/timeval :)

   - Better cache layout for the timekeeping internal data structures.

   - Proper nanosecond based interfaces for in kernel users.

   - Tree wide cleanup of code which wants nanoseconds but does hoops
     and loops to convert back and forth from timespecs.  Some of it
     definitely belongs into the ugly code museum.

   - Consolidation of the timekeeping interface zoo.

   - A fast NMI safe accessor to clock monotonic for tracing.  This is a
     long standing request to support correlated user/kernel space
     traces.  With proper NTP frequency correction it's also suitable
     for correlation of traces accross separate machines.

   - Checkpoint/restart support for timerfd.

   - A few NOHZ[_FULL] improvements in the [hr]timer code.

   - Code move from kernel to kernel/time of all time* related code.

   - New clocksource/event drivers from the ARM universe.  I'm really
     impressed that despite an architected timer in the newer chips SoC
     manufacturers insist on inventing new and differently broken SoC
     specific timers.

[ Ed. "Impressed"? I don't think that word means what you think it means ]

   - Another round of code move from arch to drivers.  Looks like most
     of the legacy mess in ARM regarding timers is sorted out except for
     a few obnoxious strongholds.

   - The usual updates and fixlets all over the place"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (114 commits)
  timekeeping: Fixup typo in update_vsyscall_old definition
  clocksource: document some basic timekeeping concepts
  timekeeping: Use cached ntp_tick_length when accumulating error
  timekeeping: Rework frequency adjustments to work better w/ nohz
  timekeeping: Minor fixup for timespec64->timespec assignment
  ftrace: Provide trace clocks monotonic
  timekeeping: Provide fast and NMI safe access to CLOCK_MONOTONIC
  seqcount: Add raw_write_seqcount_latch()
  seqcount: Provide raw_read_seqcount()
  timekeeping: Use tk_read_base as argument for timekeeping_get_ns()
  timekeeping: Create struct tk_read_base and use it in struct timekeeper
  timekeeping: Restructure the timekeeper some more
  clocksource: Get rid of cycle_last
  clocksource: Move cycle_last validation to core code
  clocksource: Make delta calculation a function
  wireless: ath9k: Get rid of timespec conversions
  drm: vmwgfx: Use nsec based interfaces
  drm: i915: Use nsec based interfaces
  timekeeping: Provide ktime_get_raw()
  hangcheck-timer: Use ktime_get_ns()
  ...
2014-08-05 17:46:42 -07:00
Linus Torvalds
8efb90cf1e Merge branch 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
 "The main changes in this cycle are:

   - big rtmutex and futex cleanup and robustification from Thomas
     Gleixner
   - mutex optimizations and refinements from Jason Low
   - arch_mutex_cpu_relax() removal and related cleanups
   - smaller lockdep tweaks"

* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
  arch, locking: Ciao arch_mutex_cpu_relax()
  locking/lockdep: Only ask for /proc/lock_stat output when available
  locking/mutexes: Optimize mutex trylock slowpath
  locking/mutexes: Try to acquire mutex only if it is unlocked
  locking/mutexes: Delete the MUTEX_SHOW_NO_WAITER macro
  locking/mutexes: Correct documentation on mutex optimistic spinning
  rtmutex: Make the rtmutex tester depend on BROKEN
  futex: Simplify futex_lock_pi_atomic() and make it more robust
  futex: Split out the first waiter attachment from lookup_pi_state()
  futex: Split out the waiter check from lookup_pi_state()
  futex: Use futex_top_waiter() in lookup_pi_state()
  futex: Make unlock_pi more robust
  rtmutex: Avoid pointless requeueing in the deadlock detection chain walk
  rtmutex: Cleanup deadlock detector debug logic
  rtmutex: Confine deadlock logic to futex
  rtmutex: Simplify remove_waiter()
  rtmutex: Document pi chain walk
  rtmutex: Clarify the boost/deboost part
  rtmutex: No need to keep task ref for lock owner check
  rtmutex: Simplify and document try_to_take_rtmutex()
  ...
2014-08-04 16:09:06 -07:00
Thomas Gleixner
d28ede8379 timekeeping: Create struct tk_read_base and use it in struct timekeeper
The members of the new struct are the required ones for the new NMI
safe accessor to clcok monotonic. In order to reuse the existing
timekeeping code and to make the update of the fast NMI safe
timekeepers a simple memcpy use the struct for the timekeeper as well
and convert all users.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
2014-07-23 15:01:53 -07:00
Thomas Gleixner
4a0e637738 clocksource: Get rid of cycle_last
cycle_last was added to the clocksource to support the TSC
validation. We moved that to the core code, so we can get rid of the
extra copy.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
2014-07-23 15:01:52 -07:00
Thomas Gleixner
dc01c9fae1 tile: Convert VDSO timekeeping to the precise mechanism
The code was only halfarsed converted to the new VSDO update mechanism
and still uses the inaccurate base value which lacks the fractional
part of xtime_nsec. Fix it up.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
2014-07-23 10:16:50 -07:00
Steven Rostedt (Red Hat)
6beecb9562 tile: ftrace: Remove check of obsolete variable function_trace_stop
Nothing sets function_trace_stop to disable function tracing anymore.
Remove the check for it in the arch code.

Cc: Chris Metcalf <cmetcalf@tilera.com>
Acked-by: Zhigang Lu<zlu@tilera.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-07-18 13:57:03 -04:00
Bart Van Assche
aa3fc09078 tgt: defconfig cleanup
Because of the removal of the scsi_tgt kernel module, the kbuild variables
CONFIG_SCSI_TGT, CONFIG_SCSI_SRP_TGT_ATTRS and CONFIG_SCSI_FC_TGT_ATTRS
are obsolete. This patch removes these variables. This patch is the result
of the following command:

find -name '*defconfig' | while read f; do grep -vwE 'CONFIG_SCSI_TGT|CONFIG_SCSI_SRP_TGT_ATTRS|CONFIG_SCSI_FC_TGT_ATTRS|CONFIG_SRP' $f >/tmp/t && mv /tmp/t $f; done

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-07-17 22:07:44 +02:00
Davidlohr Bueso
3a6bfbc91d arch, locking: Ciao arch_mutex_cpu_relax()
The arch_mutex_cpu_relax() function, introduced by 34b133f, is
hacky and ugly. It was added a few years ago to address the fact
that common cpu_relax() calls include yielding on s390, and thus
impact the optimistic spinning functionality of mutexes. Nowadays
we use this function well beyond mutexes: rwsem, qrwlock, mcs and
lockref. Since the macro that defines the call is in the mutex header,
any users must include mutex.h and the naming is misleading as well.

This patch (i) renames the call to cpu_relax_lowlatency  ("relax, but
only if you can do it with very low latency") and (ii) defines it in
each arch's asm/processor.h local header, just like for regular cpu_relax
functions. On all archs, except s390, cpu_relax_lowlatency is simply cpu_relax,
and thus we can take it out of mutex.h. While this can seem redundant,
I believe it is a good choice as it allows us to move out arch specific
logic from generic locking primitives and enables future(?) archs to
transparently define it, similarly to System Z.

Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Bharat Bhushan <r65777@freescale.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen Liqin <liqin.linux@gmail.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: David Howells <dhowells@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Deepthi Dharwar <deepthi@linux.vnet.ibm.com>
Cc: Dominik Dingel <dingel@linux.vnet.ibm.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Joe Perches <joe@perches.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Joseph Myers <joseph@codesourcery.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Cc: Lennox Wu <lennox.wu@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Nicolas Pitre <nico@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Qais Yousef <qais.yousef@imgtec.com>
Cc: Qiaowei Ren <qiaowei.ren@intel.com>
Cc: Rafael Wysocki <rafael.j.wysocki@intel.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Steven Miao <realmz6@gmail.com>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: Stratos Karafotis <stratosk@semaphore.gr>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vasily Kulikov <segoon@openwall.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Cc: Waiman Long <Waiman.Long@hp.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: adi-buildroot-devel@lists.sourceforge.net
Cc: linux390@de.ibm.com
Cc: linux-alpha@vger.kernel.org
Cc: linux-am33-list@redhat.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-c6x-dev@linux-c6x.org
Cc: linux-cris-kernel@axis.com
Cc: linux-hexagon@vger.kernel.org
Cc: linux-ia64@vger.kernel.org
Cc: linux@lists.openrisc.net
Cc: linux-m32r-ja@ml.linux-m32r.org
Cc: linux-m32r@ml.linux-m32r.org
Cc: linux-m68k@lists.linux-m68k.org
Cc: linux-metag@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-parisc@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-s390@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Cc: linux-xtensa@linux-xtensa.org
Cc: sparclinux@vger.kernel.org
Link: http://lkml.kernel.org/r/1404079773.2619.4.camel@buesod1.americas.hpqcorp.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-07-17 12:32:47 +02:00
Linus Torvalds
7ec6131b55 Merge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile
Pull arch/tile changes from Chris Metcalf:
 "These mostly just address smaller issues reported to me"

* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  arch: tile: kernel: unaligned.c: Cleaning up uninitialized variables
  drivers/tty/hvc/hvc_tile.c: use PTR_ERR_OR_ZERO
  replace strict_strto* call with kstrto*
  tile: Update comments for generic idle conversion
  tile: cleanup the comment in init_pgprot
  tile: use BOOTMEM_DEFAULT instead of magic number 0 for reserve_bootmem flags
2014-06-11 16:50:01 -07:00
Rickard Strandqvist
50b9ac1813 arch: tile: kernel: unaligned.c: Cleaning up uninitialized variables
There is a risk that the variable will be used without being initialized.

This was largely found by using a static code analysis program called cppcheck.

Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> [minor cleanups]
2014-06-07 21:39:11 -04:00
Joe Perches
804bcaf79b tile: convert use of typedef ctl_table to struct ctl_table
This typedef is unnecessary and should just be removed.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:15 -07:00
Linus Torvalds
00170fdd08 Merge branch 'akpm' (patchbomb from Andrew) into next
Merge misc updates from Andrew Morton:

 - a few fixes for 3.16.  Cc'ed to stable so they'll get there somehow.

 - various misc fixes and cleanups

 - most of the ocfs2 queue.  Review is slow...

 - most of MM.  The MM queue is pretty huge this time, but not much in
   the way of feature work.

 - some tweaks under kernel/

 - printk maintenance work

 - updates to lib/

 - checkpatch updates

 - tweaks to init/

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (276 commits)
  fs/autofs4/dev-ioctl.c: add __init to autofs_dev_ioctl_init
  fs/ncpfs/getopt.c: replace simple_strtoul by kstrtoul
  init/main.c: remove an ifdef
  kthreads: kill CLONE_KERNEL, change kernel_thread(kernel_init) to avoid CLONE_SIGHAND
  init/main.c: add initcall_blacklist kernel parameter
  init/main.c: don't use pr_debug()
  fs/binfmt_flat.c: make old_reloc() static
  fs/binfmt_elf.c: fix bool assignements
  fs/efs: convert printk(KERN_DEBUG to pr_debug
  fs/efs: add pr_fmt / use __func__
  fs/efs: convert printk to pr_foo()
  scripts/checkpatch.pl: device_initcall is not the only __initcall substitute
  checkpatch: check stable email address
  checkpatch: warn on unnecessary void function return statements
  checkpatch: prefer kstrto<foo> to sscanf(buf, "%<lhuidx>", &bar);
  checkpatch: add warning for kmalloc/kzalloc with multiply
  checkpatch: warn on #defines ending in semicolon
  checkpatch: make --strict a default for files in drivers/net and net/
  checkpatch: always warn on missing blank line after variable declaration block
  checkpatch: fix wildcard DT compatible string checking
  ...
2014-06-04 16:55:13 -07:00
Mel Gorman
b745bc85f2 mm: page_alloc: convert hot/cold parameter and immediate callers to bool
cold is a bool, make it one.  Make the likely case the "if" part of the
block instead of the else as according to the optimisation manual this is
preferred.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Jan Kara <jack@suse.cz>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:54:09 -07:00
Naoya Horiguchi
c177c81e09 hugetlb: restrict hugepage_migration_support() to x86_64
Currently hugepage migration is available for all archs which support
pmd-level hugepage, but testing is done only for x86_64 and there're
bugs for other archs.  So to avoid breaking such archs, this patch
limits the availability strictly to x86_64 until developers of other
archs get interested in enabling this feature.

Simply disabling hugepage migration on non-x86_64 archs is not enough to
fix the reported problem where sys_move_pages() hits the BUG_ON() in
follow_page(FOLL_GET), so let's fix this by checking if hugepage
migration is supported in vma_migratable().

Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Miller <davem@davemloft.net>
Cc: <stable@vger.kernel.org>	[3.12+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:53:51 -07:00
Linus Torvalds
d09cc3659d Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next
Pull core irq updates from Thomas Gleixner:
 "The irq department delivers:

   - Another tree wide update to get rid of the horrible create_irq
     interface along with its even more horrible variants.  That also
     gets rid of the last leftovers of the initial sparse irq hackery.
     arch/driver specific changes have been either acked or ignored.

   - A fix for the spurious interrupt detection logic with threaded
     interrupts.

   - A new ARM SoC interrupt controller

   - The usual pile of fixes and improvements all over the place"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits)
  Documentation: brcmstb-l2: Add Broadcom STB Level-2 interrupt controller binding
  irqchip: brcmstb-l2: Add Broadcom Set Top Box Level-2 interrupt controller
  genirq: Improve documentation to match current implementation
  ARM: iop13xx: fix msi support with sparse IRQ
  genirq: Provide !SMP stub for irq_set_affinity_notifier()
  irqchip: armada-370-xp: Move the devicetree binding documentation
  irqchip: gic: Use mask field in GICC_IAR
  genirq: Remove dynamic_irq mess
  ia64: Use irq_init_desc
  genirq: Replace dynamic_irq_init/cleanup
  genirq: Remove irq_reserve_irq[s]
  genirq: Replace reserve_irqs in core code
  s390: Avoid call to irq_reserve_irqs()
  s390: Remove pointless arch_show_interrupts()
  s390: pci: Check return value of alloc_irq_desc() proper
  sh: intc: Remove pointless irq_reserve_irqs() invocation
  x86, irq: Remove pointless irq_reserve_irqs() call
  genirq: Make create/destroy_irq() ia64 private
  tile: Use SPARSE_IRQ
  tile: pci: Use irq_alloc/free_hwirq()
  ...
2014-06-04 15:59:13 -07:00
Linus Torvalds
c84a1e32ee Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next
Pull scheduler updates from Ingo Molnar:
 "The main scheduling related changes in this cycle were:

   - various sched/numa updates, for better performance

   - tree wide cleanup of open coded nice levels

   - nohz fix related to rq->nr_running use

   - cpuidle changes and continued consolidation to improve the
     kernel/sched/idle.c high level idle scheduling logic.  As part of
     this effort I pulled cpuidle driver changes from Rafael as well.

   - standardized idle polling amongst architectures

   - continued work on preparing better power/energy aware scheduling

   - sched/rt updates

   - misc fixlets and cleanups"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (49 commits)
  sched/numa: Decay ->wakee_flips instead of zeroing
  sched/numa: Update migrate_improves/degrades_locality()
  sched/numa: Allow task switch if load imbalance improves
  sched/rt: Fix 'struct sched_dl_entity' and dl_task_time() comments, to match the current upstream code
  sched: Consolidate open coded implementations of nice level frobbing into nice_to_rlimit() and rlimit_to_nice()
  sched: Initialize rq->age_stamp on processor start
  sched, nohz: Change rq->nr_running to always use wrappers
  sched: Fix the rq->next_balance logic in rebalance_domains() and idle_balance()
  sched: Use clamp() and clamp_val() to make sys_nice() more readable
  sched: Do not zero sg->cpumask and sg->sgp->power in build_sched_groups()
  sched/numa: Fix initialization of sched_domain_topology for NUMA
  sched: Call select_idle_sibling() when not affine_sd
  sched: Simplify return logic in sched_read_attr()
  sched: Simplify return logic in sched_copy_attr()
  sched: Fix exec_start/task_hot on migrated tasks
  arm64: Remove TIF_POLLING_NRFLAG
  metag: Remove TIF_POLLING_NRFLAG
  sched/idle: Make cpuidle_idle_call() void
  sched/idle: Reflow cpuidle_idle_call()
  sched/idle: Delay clearing the polling bit
  ...
2014-06-03 14:00:15 -07:00
Daniel Walter
b2dfa048ba replace strict_strto* call with kstrto*
remove obsolete calls to strict_strto* and replace them
with kstrto* calls accordingly.

Signed-off-by: Daniel Walter <dwalter@google.com>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2014-05-28 15:47:16 -04:00
Geert Uytterhoeven
ba159fd387 tile: Update comments for generic idle conversion
As of commit 0dc8153cfe ("tile: Use generic
idle loop"), this applies to arch_cpu_idle() instead of cpu_idle().

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2014-05-23 13:32:09 -04:00
Thomas Gleixner
b26d851ff1 tile: Use SPARSE_IRQ
Get rid of the private allocator and switch over to sparse IRQs.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Grant Likely <grant.likely@linaro.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Link: http://lkml.kernel.org/r/20140507154338.423715783@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-05-16 14:05:21 +02:00
Thomas Gleixner
2aa799d891 tile: pci: Use irq_alloc/free_hwirq()
No functional change. Just convert to the new interface.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Grant Likely <grant.likely@linaro.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Link: http://lkml.kernel.org/r/20140507154338.132662495@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-05-16 14:05:21 +02:00
Thomas Gleixner
6ef40512c5 tile: Implement irq_alloc/free_hwirq() for migration
We want to convert the drivers over to the new interface and finally
tile to sparse irqs. Implement irq_alloc/free_hwirq() for step by step
migration.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Grant Likely <grant.likely@linaro.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Link: http://lkml.kernel.org/r/20140507154336.947853241@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-05-16 14:05:20 +02:00
Wang Sheng-Hui
e540e835f8 tile: cleanup the comment in init_pgprot
In tile vmlinux, the rodata area start after the _sdata.
The rodata area is included between [_sdata, __end_rodata),
and is handled at an earlier point.
The page walk starts at __end_rodata, not _sdata.

Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2014-05-13 11:51:10 -04:00
Peter Zijlstra
b3a8cb18ce sched/idle, tile: Switch from TS_POLLING to TIF_POLLING_NRFLAG
Standardize the idle polling indicator to TIF_POLLING_NRFLAG such that
both TIF_NEED_RESCHED and TIF_POLLING_NRFLAG are in the same word.
This will allow us, using fetch_or(), to both set NEED_RESCHED and
check for POLLING_NRFLAG in a single operation and avoid pointless
wakeups.

Changing from the non-atomic thread_info::status flags to the atomic
thread_info::flags shouldn't be a big issue since most polling state
changes were followed/preceded by a full memory barrier anyway.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/n/tip-35zzwlvwr7cp8xj196y10yyx@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-05-08 09:16:54 +02:00
Vincent Guittot
143e1e28cb sched: Rework sched_domain topology definition
We replace the old way to configure the scheduler topology with a new method
which enables a platform to declare additionnal level (if needed).

We still have a default topology table definition that can be used by platform
that don't want more level than the SMT, MC, CPU and NUMA ones. This table can
be overwritten by an arch which either wants to add new level where a load
balance make sense like BOOK or powergating level or wants to change the flags
configuration of some levels.

For each level, we need a function pointer that returns cpumask for each cpu,
a function pointer that returns the flags for the level and a name. Only flags
that describe topology, can be set by an architecture. The current topology
flags are:

 SD_SHARE_CPUPOWER
 SD_SHARE_PKG_RESOURCES
 SD_NUMA
 SD_ASYM_PACKING

Then, each level must be a subset on the next one. The build sequence of the
sched_domain will take care of removing useless levels like those with 1 CPU
and those with the same CPU span and no more relevant information for
load balancing than its children.

Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jason Low <jason.low2@hp.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux390@de.ibm.com
Cc: linux-ia64@vger.kernel.org
Cc: linux-s390@vger.kernel.org
Link: http://lkml.kernel.org/r/1397209481-28542-2-git-send-email-vincent.guittot@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-05-07 13:33:49 +02:00
Wang Sheng-Hui
3af1ea5a2e tile: use BOOTMEM_DEFAULT instead of magic number 0 for reserve_bootmem flags
Use macro flag BOOTMEM_DEFAULT instead of magic number 0 for reserve_bootmem.

Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2014-05-02 12:26:32 -04:00
Peter Zijlstra
ce3609f934 arch,tile: Convert smp_mb__*()
Implement the new smp_mb__* ops as per the old ones.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Link: http://lkml.kernel.org/n/tip-euuabnf5a3u23fy4fq8m3jcg@git.kernel.org
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Chen Gang <gang.chen@asianux.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-18 14:20:45 +02:00
Uwe Kleine-König
ce816fa88c Kconfig: rename HAS_IOPORT to HAS_IOPORT_MAP
If the renamed symbol is defined lib/iomap.c implements ioport_map and
ioport_unmap and currently (nearly) all platforms define the port
accessor functions outb/inb and friend unconditionally.  So
HAS_IOPORT_MAP is the better name for this.

Consequently NO_IOPORT is renamed to NO_IOPORT_MAP.

The motivation for this change is to reintroduce a symbol HAS_IOPORT
that signals if outb/int et al are available.  I will address that at
least one merge window later though to keep surprises to a minimum and
catch new introductions of (HAS|NO)_IOPORT.

The changes in this commit were done using:

	$ git grep -l -E '(NO|HAS)_IOPORT' | xargs perl -p -i -e 's/\b((?:CONFIG_)?(?:NO|HAS)_IOPORT)\b/$1_MAP/'

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 16:36:11 -07:00
Linus Torvalds
18a1a7a1d8 Merge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile
Pull arch/tile updates from Chris Metcalf:
 "These fix a few stray build issues seen in linux-next, and also add
  the minimal required support for perf to tilegx"

* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  arch/tile: remove unused variable 'devcap'
  tile: Fix vDSO compilation issue with allyesconfig
  perf tools: Allow building for tile
  tile/perf: Support perf_events on tilegx and tilepro
  tile: Enable NMIs on return from handle_nmi() without errors
  tile: Add support for handling PMC hardware
  tile: don't use __get_cpu_var() with structure-typed arguments
  tile: avoid overflow in ns2cycles
2014-04-06 08:11:57 -07:00