When more than one FE is connected to a BE, e.g. in a mixing use case,
the BE can be triggered multiple times when the FE are opened/started
concurrently. This race condition is problematic in the case of
SoundWire BE dailinks, and this is not desirable in a general
case. The code carefully checks when the BE can be stopped or
hw_free'ed, but the trigger code does not use any mutual exclusion.
Fix by using the same spinlock already used to check FE states, and
set the state before the trigger. In case of errors, the initial
state will be restored.
This patch does not change how the triggers are handled, it only makes
sure the states are handled in critical sections.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Message-Id: <20210817164054.250028-2-pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
These patches fixup or update for rockchip i2s.
Changes in v3:
- Drop property 'rockchip,playback-only', 'rockchip,capture-only'.
Implement it by 'dma-names' of DT instead.
Changes in v2:
- split property trcm into single 'trcm-sync-tx-only' and
'trcm-sync-rx-only' suggested by Nicolas.
- split property trcm into single 'trcm-sync-tx-only' and
'trcm-sync-rx-only' suggested by Nicolas.
- drop change-id
Sugar Zhang (12):
ASoC: rockchip: i2s: Add support for set bclk ratio
ASoC: rockchip: i2s: Fixup clk div error
ASoC: rockchip: i2s: Improve dma data transfer efficiency
ASoC: rockchip: i2s: Fix regmap_ops hang
ASoC: rockchip: i2s: Fix concurrency between tx/rx
ASoC: rockchip: i2s: Reset the controller if soft reset failed
ASoC: dt-bindings: rockchip: Document reset property for i2s
ASoC: rockchip: i2s: Make playback/capture optional
ASoC: rockchip: i2s: Add compatible for more SoCs
ASoC: dt-bindings: rockchip: Add compatible strings for more SoCs
ASoC: rockchip: i2s: Add support for frame inversion
ASoC: dt-bindings: rockchip: i2s: Document property TRCM
Xiaotan Luo (1):
ASoC: rockchip: i2s: Fixup config for DAIFMT_DSP_A/B
Xing Zheng (1):
ASoC: rockchip: i2s: Add support for TRCM property
.../devicetree/bindings/sound/rockchip-i2s.yaml | 19 ++
sound/soc/rockchip/rockchip_i2s.c | 278 +++++++++++++++------
sound/soc/rockchip/rockchip_i2s.h | 10 +-
3 files changed, 224 insertions(+), 83 deletions(-)
--
2.7.4
- DSP_A: PCM delay 1 bit mode, L data MSB after FRM LRC
- DSP_B: PCM no delay mode, L data MSB during FRM LRC
Signed-off-by: Xiaotan Luo <lxt@rock-chips.com>
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Link: https://lore.kernel.org/r/1629950562-14281-3-git-send-email-sugar.zhang@rock-chips.com
Signed-off-by: Mark Brown <broonie@kernel.org>
MCLK maybe not precise as required because of PLL,
but which still can be used and no side effect. so,
using DIV_ROUND_CLOSEST instead div.
e.g.
set mclk to 11289600 Hz, but get 11289598 Hz.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Link: https://lore.kernel.org/r/1629950520-14190-2-git-send-email-sugar.zhang@rock-chips.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix the wrong button vol+ detection issue with some brand headsets
by fine tuning the threshold of button vol+ and SAR ADC button accuracy.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/20210825040346.28346-1-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Marking the two jack gpio as static fixes the following Sparse errors:
sound/soc/intel/boards/bytcr_rt5640.c:468:26: error: symbol 'rt5640_jack_gpio' was not declared. Should it be static?
sound/soc/intel/boards/bytcr_rt5640.c:475:26: error: symbol 'rt5640_jack2_gpio' was not declared. Should it be static?
Fixes: 9ba0085668 ("ASoC: Intel: bytcr_rt5640: Add support for HP Elite Pad 1000G2 jack-detect")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20210825122519.3364-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the following includecheck warning:
./sound/soc/sof/intel/pci-tng.c: shim.h is included more than once.
No functional change.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210824030015.57267-1-deng.changcheng@zte.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds support for mt8195 board with mt6359, rt1019 and rt5682.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20210819084144.18483-9-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds mt8195 audio afe document.
In order to support dynamic clock reparenting for ADDA and ETDM, PLL
and MUX clocks are requested even though they are not consumed by afe
directly.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://lore.kernel.org/r/20210819084144.18483-8-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds mt8195 adda dai driver.
audio_h clock is used by ADSP bus and ADDA module.
When ADDA requires audio_h clock, it is switched to APLL1, otherwise
it is switched to Xtal_26m so that APLL1 can be turned off when audio
feature is not used.
ADSP bus only requires that the clock is on, so dynamic reparenting
is used for the purpose of lowering power consumption.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://lore.kernel.org/r/20210819084144.18483-5-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds mt8195 tdm/i2s dai driver.
MCLK clock tree is as follows.
PLL -> MUX -> DIVIDER -> MCLK
For PLL source of MCLK, driver only supports APLL1 and APLL2 now.
APLL3 and APLL4 are used to track external clock source, so they are
only used when slave input is connected.
For example,
case 1: (HDMI RX connected)
DL memif (a1sys) -> etdm out2 (clk from apll1/apll2) -> codec
case 2: (HDMI RX disconnected)
HDMI RX -> a3sys -> UL memif (a3sys) -> DL memif (a3sys) -> .... ->
etdm out2 (clk from apll3) -> codec
We keep all modules in the pipeline working on the same clock domain.
MCLK is expected to output the clock generated from the same clock
source as the pipeline, so dynamic reparenting is required for MCLK
configuration.
As a result, clk_set_parent() is used to select PLL source,
and clk_set_rate() is used to configure divider to get MCLK output rate.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://lore.kernel.org/r/20210819084144.18483-4-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds mt8195 audio cg control.
Audio clock gates are registered to CCF for reference count and
clock parent management.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://lore.kernel.org/r/20210819084144.18483-3-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch reverts commit acbf58e530 ("ASoC: wm_adsp: Let
soc_cleanup_component_debugfs remove debugfs"), and adds an
alternate solution to the issue. That patch removes the call to
debugfs_remove_recursive, which cleans up the DSPs debugfs. The
intention was to avoid an unbinding issue on an out of tree
driver/platform.
The issue with the patch is it means the driver no longer cleans up
its own debugfs, instead relying on ASoC to remove recurive on the
parent debugfs node. This is conceptually rather unclean, but also it
would prevent DSPs being added/removed independently of ASoC and soon
we are going to be upstreaming some non-audio parts with these DSPs,
which will require this.
Finally, it seems the issue on the platform is a result of the
wm_adsp2_cleanup_debugfs getting called twice. This is very likely a
problem on the platform side and will be resolved there. But in the mean
time make the code a little more robust to such issues, and again
conceptually a bit nicer, but clearing the debugfs_root variable in the
DSP structure when the debugfs is removed.
Fixes: acbf58e530 ("ASoC: wm_adsp: Let soc_cleanup_component_debugfs remove debugfs"
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210824101552.1119-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Existing skylake-driver supports very basic scenarios with limited range
of modules and their control. Attached changes first fix code as several
advanced configurations are 'mentioned' throughout the files but are not
actually functional. Follow up are changes adding missing support for
said configurations.
Cezary Rojewski (5):
ASoC: Intel: kbl_da7219_max98927: Fix format selection for max98373
ASoC: Intel: Skylake: Leave data as is when invoking TLV IPCs
ASoC: Intel: Skylake: Fix module resource and format selection
ASoC: Intel: Skylake: Fix module configuration for KPB and MIXER
ASoC: Intel: Skylake: Select first entry for singular pipe config
arrays
Gustaw Lewandowski (2):
ASoC: Intel: Skylake: Fix passing loadable flag for module
ASoC: Intel: Skylake: Simplify m_state for loadable modules
Kareem Shaik (1):
ASoC: Intel: Skylake: Support multiple format configs
Pawel Harlozinski (1):
ASoC: Intel: Skylake: Properly configure modules with generic
extension
Piotr Maziarz (1):
ASoC: Intel: Skylake: Select proper format for NHLT blob
Szymon Mielczarek (1):
ASoC: Intel: Skylake: Support modules with generic extension
include/uapi/sound/snd_sst_tokens.h | 6 +-
sound/soc/intel/boards/kbl_da7219_max98927.c | 55 +------
sound/soc/intel/skylake/skl-messages.c | 155 ++++++++++++-------
sound/soc/intel/skylake/skl-pcm.c | 25 ++-
sound/soc/intel/skylake/skl-topology.c | 155 +++++++++++--------
sound/soc/intel/skylake/skl-topology.h | 26 +++-
6 files changed, 231 insertions(+), 191 deletions(-)
--
2.25.1
bclk_ms is possible unused by using the given config (see [1]).
sound/soc/codecs/rt1015.c:724:2: warning: Value stored to 'bclk_ms' is
never read [clang-analyzer-deadcode.DeadStores]
bclk_ms = frame_size > 32;
^ ~~~~~~~~~~~~~~~
In addition, bclk_ms is meaningless and confusing after applying commit
a5db2ca513 ("ASoC: rt1015: remove unneeded variables in rt1015_priv").
The "> 32" in the expression looks like a typo but it was not.
Let's remove the confusing variable bclk_ms.
[1]: https://lkml.org/lkml/2021/8/23/305
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20210823153323.1297723-1-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The byt_rt5640_hp_elitepad_1000g2_jack?_check functions are only
used inside bytcr_rt5640.c, mark them as static.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210823110432.64860-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use common enum instead of oneOf and correct indentation warning:
realtek,rt1015p.yaml:18:7: [warning] wrong indentation: expected 4 but found 6 (indentation)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Tzung-Bi Shih <tzungbi@google.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210819101020.26368-2-krzysztof.kozlowski@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When pipe does not expose multiple configuration options, always select
the first entry without searching for matching one.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Tested-by: Lukasz Majczak <lma@semihalf.com>
Link: https://lore.kernel.org/r/20210818075742.1515155-12-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Make use of struct skl_base_cfg_ext and its format setter to configure
modules which are described with said structure.
Signed-off-by: Gustaw Lewandowski <gustaw.lewandowski@linux.intel.com>
Signed-off-by: Pawel Harlozinski <pawel.harlozinski@linux.intel.com>
Signed-off-by: Szymon Mielczarek <szymonx.mielczarek@intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Tested-by: Lukasz Majczak <lma@semihalf.com>
Link: https://lore.kernel.org/r/20210818075742.1515155-11-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some DSP modules require, besides the module base configuration, a
generic extension containing audio format for all module's pins that are
in use.
Signed-off-by: Gustaw Lewandowski <gustaw.lewandowski@linux.intel.com>
Signed-off-by: Szymon Mielczarek <szymonx.mielczarek@intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Tested-by: Lukasz Majczak <lma@semihalf.com>
Link: https://lore.kernel.org/r/20210818075742.1515155-10-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A module can have two kinds of set params, as per topology requirements.
For example, one pre-init and one post-init. But currently, there is
support for just one type, as the format_config.
This patch extends the format_configs to 4, so as to be able to support
pre-init, post-init and post-bind type of set params, for the same
module, simultaneously.
Signed-off-by: Kareem Shaik <kareem.m.shaik@intel.com>
Signed-off-by: Gustaw Lewandowski <gustaw.lewandowski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Tested-by: Lukasz Majczak <lma@semihalf.com>
Link: https://lore.kernel.org/r/20210818075742.1515155-9-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
States SKL_MODULE_LOADED and SKL_MODULE_UNLOADED are redundant with
'loadable' flag in struct skl_module. Additionally
skl_tplg_mixer_dapm_post_pmd_event() sets m_state always to
SKL_MODULE_UNINIT so next unload function isn't called for such modules.
Signed-off-by: Gustaw Lewandowski <gustaw.lewandowski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Tested-by: Lukasz Majczak <lma@semihalf.com>
Link: https://lore.kernel.org/r/20210818075742.1515155-8-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
skl_get_module_info() tries to set mconfig->module->loadable before
mconfig->module has been assigned thus flag was always set to false
and driver did not try to load module binaries.
Signed-off-by: Gustaw Lewandowski <gustaw.lewandowski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Tested-by: Lukasz Majczak <lma@semihalf.com>
Link: https://lore.kernel.org/r/20210818075742.1515155-7-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
