The device health recovery flow calls mlx5_health_wait_pci_up() which
queries the device for FW_RESET timeout after freeing the device
timeouts structure on mlx5_function_teardown(). Fix this bug by moving
timeouts structure init/cleanup to the device's init/uninit phases.
Since it is necessary to reset default software timeouts on function
reload, extract setting of defaults values from mlx5_tout_init() and
call mlx5_tout_set_def_val() directly from mlx5_function_setup().
Fixes: 5945e1adea ("net/mlx5: Read timeout values from init segment")
Reported by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Amir Tzin <amirtz@nvidia.com>
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
When adding rule with multiple destinations, indirect table is used for all of
the destinations if at least one of the destinations support it, this can cause
creation of invalid indirect tables for the destinations that doesn't support it.
Fixed it by using indirect table only if all destinations support it.
Fixes: a508728a4c ("net/mlx5e: VF tunnel RX traffic offloading")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
If log_esw_max_sched_depth is not supported group pointer of the vport
is NULL. Hence, check the pointer before reading bw_share value.
Fixes: 0fe132eac3 ("net/mlx5: E-switch, Allow to add vports to rate groups")
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Always use MLX5_FLOW_TABLE_OTHER_VPORT flag when creating egress ACL
table for single FDB. Not doing so on BlueField will make firmware fail
the command. On BlueField the E-Switch manager is the ECPF (vport 0xFFFE)
which is filled in the flow table creation command but as the
other_vport field wasn't set the firmware complains about a bad parameter.
This is different from a regular HCA where the E-Switch manager vport is
the PF (vport 0x0). Passing MLX5_FLOW_TABLE_OTHER_VPORT will make the
firmware happy both on BlueField and on regular HCAs without special
condition for each.
This fixes the bellow firmware syndrome:
mlx5_cmd_check:819:(pid 571): CREATE_FLOW_TABLE(0x930) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x754a4)
Fixes: db202995f5 ("net/mlx5: E-Switch, add logic to enable shared FDB")
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
To enable transmit schduler on vport FW require non-zero configuration
for vport's TSAR. If vport added to the group which has configured BW
share value and TX rate values of the vport are zero, then scheduler
wouldn't be enabled on this vport.
Fix that by calling BW normalization if BW share of the new group is
configured.
Fixes: 0fe132eac3 ("net/mlx5: E-switch, Allow to add vports to rate groups")
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
When the device is in internal error state, command interface isn't
accessible and the driver decides which commands to fail and which
to ignore.
Move the MODIFY_RQT command to the ignore list in order to avoid
the following redundant warning messages in internal error state:
mlx5_core 0000:82:00.1: mlx5e_rss_disable:419:(pid 23754): Failed to redirect RQT 0x0 to drop RQ 0xc00848: err = -5
mlx5_core 0000:82:00.1: mlx5e_rx_res_channels_deactivate:598:(pid 23754): Failed to redirect direct RQT 0x1 to drop RQ 0xc00848 (channel 0): err = -5
mlx5_core 0000:82:00.1: mlx5e_rx_res_channels_deactivate:607:(pid 23754): Failed to redirect XSK RQT 0x19 to drop RQ 0xc00848 (channel 0): err = -5
Fixes: 43ec0f41fa ("net/mlx5e: Hide all implementation details of mlx5e_rx_res")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Transport Interface Receive (TIR) objects perform the packet processing and
reassembly and is also responsible for demultiplexing the packets into the
different RQs.
There are certain TIR context attributes that propagate to the pointed RQs
and applied to them (like packet_merge offloads (LRO/SHAMPO) and
tunneled_offload_en). When TIRs do not agree on attributes values, a "last
one wins" policy is applied. Hence, if not synced properly, a race between
TIR params update and a concurrent TIR create/modify operation might yield
to a mismatch between the shadow parameters in SW and the actual applied
state of the RQs in HW.
tunneled_offload_en is a fixed attribute per profile, while packet merge
offload state might be toggled and get out-of-sync. When this happens,
packet_merge offload might be working although not requested, or the
opposite.
All updates to packet_merge state and all create/modify operations of
regular redirection/steering TIRs are done under the same priv->state_lock,
so they do not run in parallel, and no race is possible.
However, there are other kind of TIRs (acceleration offloads TIRs, like TLS
TIRs) which are created on demand for each new connection without holding
the coarse priv->state_lock, hence might race.
Fix this by synchronizing all packet_merge state reads and writes against
all TIR create/modify operations. Include the modify operations of the
regular redirection steering TIRs under the new lock, for better code
layering and division of responsibilities.
Fixes: 1182f36593 ("net/mlx5e: kTLS, Add kTLS RX HW offload support")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The cited patch added the IPsec support to uplink representor, however
as uplink representors have his private statistics where IPsec stats
is not part of it, that effectively makes IPsec stats hidden when uplink
representor stats queried.
Resolve by adding IPsec stats to uplink representor private statistics.
Fixes: 5589b8f1a2 ("net/mlx5e: Add IPsec support to uplink representor")
Signed-off-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Alaa Hleihel <alaa@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Current code wrongly uses the skb->protocol field which reflects the
outer l3 protocol to set the inner l3 type in Software Parser (SWP)
fields settings in the ethernet segment (eseg) in flows where inner
l3 exists like in Vxlan over ESP flow, the above method wrongly use
the outer protocol type instead of the inner one. thus breaking cases
where inner and outer headers have different protocols.
Fix by setting the inner l3 type in SWP according to the inner l3 ip
header version.
Fixes: 2ac9cfe782 ("net/mlx5e: IPSec, Add Innova IPSec offload TX data path")
Signed-off-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Fix section mismatch warnings in xtsonic. The first one appears to be
bogus and after fixing the second one, the first one is gone.
WARNING: modpost: vmlinux.o(.text+0x529adc): Section mismatch in reference from the function sonic_get_stats() to the function .init.text:set_reset_devices()
The function sonic_get_stats() references
the function __init set_reset_devices().
This is often because sonic_get_stats lacks a __init
annotation or the annotation of set_reset_devices is wrong.
WARNING: modpost: vmlinux.o(.text+0x529b3b): Section mismatch in reference from the function xtsonic_probe() to the function .init.text:sonic_probe1()
The function xtsonic_probe() references
the function __init sonic_probe1().
This is often because xtsonic_probe lacks a __init
annotation or the annotation of sonic_probe1 is wrong.
Fixes: 74f2a5f0ef ("xtensa: Add support for the Sonic Ethernet device for the XT2000 board.")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Finn Thain <fthain@telegraphics.com.au>
Cc: Chris Zankel <chris@zankel.net>
Cc: linux-xtensa@linux-xtensa.org
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Link: https://lore.kernel.org/r/20211130063947.7529-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convention for all the other "lake" CPUs is all one word.
So s/RAPTOR_LAKE/RAPTORLAKE/
Fixes: fbdb5e8f29 ("x86/cpu: Add Raptor Lake to Intel family")
Reported-by: Rui Zhang <rui.zhang@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20211119170832.1034220-1-tony.luck@intel.com
In a typical read transfer, start completion flag is being set after
read finishes (notice ipd bit 4 being set):
trasnfer poll=0
i2c start
rk3x-i2c fdd40000.i2c: IRQ: state 1, ipd: 10
i2c read
rk3x-i2c fdd40000.i2c: IRQ: state 2, ipd: 1b
i2c stop
rk3x-i2c fdd40000.i2c: IRQ: state 4, ipd: 33
This causes I2C transfer being aborted in polled mode from a stop completion
handler:
trasnfer poll=1
i2c start
rk3x-i2c fdd40000.i2c: IRQ: state 1, ipd: 10
i2c read
rk3x-i2c fdd40000.i2c: IRQ: state 2, ipd: 0
rk3x-i2c fdd40000.i2c: IRQ: state 2, ipd: 1b
i2c stop
rk3x-i2c fdd40000.i2c: IRQ: state 4, ipd: 13
i2c stop
rk3x-i2c fdd40000.i2c: unexpected irq in STOP: 0x10
Clearing the START flag after read fixes the issue without any obvious
side effects.
This issue was dicovered on RK3566 when adding support for powering
off the RK817 PMIC.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
random.c is a bit understaffed, and folks want more prompt reviews. I've
got the crypto background and the interest to do these reviews, and have
authored parts of the file already.
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Default KBUILD_IMAGE to $(boot)/bzImage if a self-extracting
(CONFIG_PARISC_SELF_EXTRACT=y) kernel is to be built.
This fixes the bindeb-pkg make target.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v4.14+
This is to fix incorrect pointer arithmetic which caused wrong
OpRegion version returned, then VM driver got error to get wanted
VBT block. We need to be safe to return correct data, so force
pointer type for byte access.
Fixes: 49ba1a2976 ("vfio/pci: Add OpRegion 2.0+ Extended VBT support.")
Cc: Colin Xu <colin.xu@gmail.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Dmitry Torokhov <dtor@chromium.org>
Cc: "Xu, Terrence" <terrence.xu@intel.com>
Cc: "Gao, Fred" <fred.gao@intel.com>
Acked-by: Colin Xu <colin.xu@gmail.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: https://lore.kernel.org/r/20211125051328.3359902-1-zhenyuw@linux.intel.com
[aw: line wrap]
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
vfio.c abuses (misuses) "/**", which indicates the beginning of
kernel-doc notation in the kernel tree. This causes a bunch of
kernel-doc complaints about this source file, so quieten all of
them by changing all "/**" to "/*".
vfio.c:236: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* IOMMU driver registration
vfio.c:236: warning: missing initial short description on line:
* IOMMU driver registration
vfio.c:295: warning: expecting prototype for Container objects(). Prototype was for vfio_container_get() instead
vfio.c:317: warning: expecting prototype for Group objects(). Prototype was for __vfio_group_get_from_iommu() instead
vfio.c:496: warning: Function parameter or member 'device' not described in 'vfio_device_put'
vfio.c:496: warning: expecting prototype for Device objects(). Prototype was for vfio_device_put() instead
vfio.c:599: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Async device support
vfio.c:599: warning: missing initial short description on line:
* Async device support
vfio.c:693: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* VFIO driver API
vfio.c:693: warning: missing initial short description on line:
* VFIO driver API
vfio.c:835: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Get a reference to the vfio_device for a device. Even if the
vfio.c:835: warning: missing initial short description on line:
* Get a reference to the vfio_device for a device. Even if the
vfio.c:969: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* VFIO base fd, /dev/vfio/vfio
vfio.c:969: warning: missing initial short description on line:
* VFIO base fd, /dev/vfio/vfio
vfio.c:1187: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* VFIO Group fd, /dev/vfio/$GROUP
vfio.c:1187: warning: missing initial short description on line:
* VFIO Group fd, /dev/vfio/$GROUP
vfio.c:1540: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* VFIO Device fd
vfio.c:1540: warning: missing initial short description on line:
* VFIO Device fd
vfio.c:1615: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* External user API, exported by symbols to be linked dynamically.
vfio.c:1615: warning: missing initial short description on line:
* External user API, exported by symbols to be linked dynamically.
vfio.c:1663: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* External user API, exported by symbols to be linked dynamically.
vfio.c:1663: warning: missing initial short description on line:
* External user API, exported by symbols to be linked dynamically.
vfio.c:1742: warning: Function parameter or member 'caps' not described in 'vfio_info_cap_add'
vfio.c:1742: warning: Function parameter or member 'size' not described in 'vfio_info_cap_add'
vfio.c:1742: warning: Function parameter or member 'id' not described in 'vfio_info_cap_add'
vfio.c:1742: warning: Function parameter or member 'version' not described in 'vfio_info_cap_add'
vfio.c:1742: warning: expecting prototype for Sub(). Prototype was for vfio_info_cap_add() instead
vfio.c:2276: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Module/class support
vfio.c:2276: warning: missing initial short description on line:
* Module/class support
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Eric Auger <eric.auger@redhat.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: kvm@vger.kernel.org
Link: https://lore.kernel.org/r/38a9cb92-a473-40bf-b8f9-85cc5cfc2da4@infradead.org
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
* Fix constant sign extension affecting TCR_EL2 and preventing
running on ARMv8.7 models due to spurious bits being set
* Fix use of helpers using PSTATE early on exit by always sampling
it as soon as the exit takes place
* Move pkvm's 32bit handling into a common helper
RISC-V:
* Fix incorrect KVM_MAX_VCPUS value
* Unmap stage2 mapping when deleting/moving a memslot
x86:
* Fix and downgrade BUG_ON due to uninitialized cache
* Many APICv and MOVE_ENC_CONTEXT_FROM fixes
* Correctly emulate TLB flushes around nested vmentry/vmexit
and when the nested hypervisor uses VPID
* Prevent modifications to CPUID after the VM has run
* Other smaller bugfixes
Generic:
* Memslot handling bugfixes
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmGmHBEUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOkGgf/RBjt1d7H6Um7tD7oA5QiIHmNY4ko
K/90OAa8h62rilxpqxkRgLNmphBc5AzcbufVXN4J1hVhw2M+u1ouDxKeHS1GEZTA
/XdNb0dwK99TpOJkIcuV/NQVIZUxkM00VbIiCoLkX06VuIc1Gie1G4bqzLhWCP8Y
ts9l/pkfafvfEmjmcjVd7gkDOnEPbT+JPDJcuo/RA7C7Z2L4+8DsFeyfWGqBP647
J6omUUxD82QRm28OVOK4V7aNALWsAdlaqHrVFAPZywQl7QTWMO0UTcKTdCCB2B4Q
QnHejFV6pFh55q3/fhe7epy9e2Sw+NOsmWKTEGPbU5nn94R8lyW1GV4ZUQ==
=Nduu
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM64:
- Fix constant sign extension affecting TCR_EL2 and preventing
running on ARMv8.7 models due to spurious bits being set
- Fix use of helpers using PSTATE early on exit by always sampling it
as soon as the exit takes place
- Move pkvm's 32bit handling into a common helper
RISC-V:
- Fix incorrect KVM_MAX_VCPUS value
- Unmap stage2 mapping when deleting/moving a memslot
x86:
- Fix and downgrade BUG_ON due to uninitialized cache
- Many APICv and MOVE_ENC_CONTEXT_FROM fixes
- Correctly emulate TLB flushes around nested vmentry/vmexit and when
the nested hypervisor uses VPID
- Prevent modifications to CPUID after the VM has run
- Other smaller bugfixes
Generic:
- Memslot handling bugfixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (44 commits)
KVM: fix avic_set_running for preemptable kernels
KVM: VMX: clear vmx_x86_ops.sync_pir_to_irr if APICv is disabled
KVM: SEV: accept signals in sev_lock_two_vms
KVM: SEV: do not take kvm->lock when destroying
KVM: SEV: Prohibit migration of a VM that has mirrors
KVM: SEV: Do COPY_ENC_CONTEXT_FROM with both VMs locked
selftests: sev_migrate_tests: add tests for KVM_CAP_VM_COPY_ENC_CONTEXT_FROM
KVM: SEV: move mirror status to destination of KVM_CAP_VM_MOVE_ENC_CONTEXT_FROM
KVM: SEV: initialize regions_list of a mirror VM
KVM: SEV: cleanup locking for KVM_CAP_VM_MOVE_ENC_CONTEXT_FROM
KVM: SEV: do not use list_replace_init on an empty list
KVM: x86: Use a stable condition around all VT-d PI paths
KVM: x86: check PIR even for vCPUs with disabled APICv
KVM: VMX: prepare sync_pir_to_irr for running with APICv disabled
KVM: selftests: page_table_test: fix calculation of guest_test_phys_mem
KVM: x86/mmu: Handle "default" period when selectively waking kthread
KVM: MMU: shadow nested paging does not have PKU
KVM: x86/mmu: Remove spurious TLB flushes in TDP MMU zap collapsible path
KVM: x86/mmu: Use yield-safe TDP MMU root iter in MMU notifier unmapping
KVM: X86: Use vcpu->arch.walk_mmu for kvm_mmu_invlpg()
...
Commit 98e1385ef2 ("include/linux/radix-tree.h: replace kernel.h with
the necessary inclusions") broke the radix tree test suite in two
different ways; first by including math.h which didn't exist in the
tools directory, and second by removing an implicit include of
spinlock.h before lockdep.h. Fix both issues.
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
avic_set_running() passes the current CPU to avic_vcpu_load(), albeit
via vcpu->cpu rather than smp_processor_id(). If the thread is migrated
while avic_set_running runs, the call to avic_vcpu_load() can use a stale
value for the processor id. Avoid this by blocking preemption over the
entire execution of avic_set_running().
Reported-by: Sean Christopherson <seanjc@google.com>
Fixes: 8221c13700 ("svm: Manage vcpu load/unload when enable AVIC")
Cc: stable@vger.kernel.org
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is nothing to synchronize if APICv is disabled, since neither
other vCPUs nor assigned devices can set PIR.ON.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add Alexandra and Wenjia as maintainers for drivers/s390/net and iucv.
Also, remove myself as maintainer for these areas.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Acked-by: Alexandra Winter <wintera@linux.ibm.com>
Acked-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The commit c55211892f ("dpaa2-eth: support PTP Sync packet one-step
timestamping") forgets to destroy workqueue at the end of remove
function.
Fix this by adding destroy_workqueue before fsl_mc_portal_free and
free_netdev.
Fixes: c55211892f ("dpaa2-eth: support PTP Sync packet one-step timestamping")
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix a bug in which the receiving of packets can stop in the zero-copy
driver. Ice HW ignores 3 lower bits from QRX_TAIL register, which means
that tail is bumped only on intervals of 8. Currently with XSK RX
batching in place, ice_alloc_rx_bufs_zc() clears the status_error0 only
of the last descriptor that has been allocated/taken from the XSK buffer
pool. status_error0 includes DD bit that is looked upon by the
ice_clean_rx_irq_zc() to tell if a descriptor can be processed.
The bug can be triggered when driver updates the ntu but not the
QRX_TAIL, so HW wouldn't have a chance to write to the ready
descriptors. Later on driver moves the ntc to the mentioned set of
descriptors and interprets them as a ready to be processed, since
corresponding DD bits were not cleared nor any writeback has happened
that would clear it. This can then lead to ntc == ntu case which means
that ring is empty and no further packet processing.
Fix the XSK traffic hang that can be observed when l2fwd scenario from
xdpsock is used by making sure that status_error0 is cleared for each
descriptor that is fed to HW and therefore we are sure that driver will
not processed non-valid DD bits. This will also prevent the driver from
processing the descriptors that were allocated in favor of the
previously processed ones, but writeback didn't happen yet.
Fixes: db804cfc21 ("ice: Use the xsk batched rx allocation interface")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
'bitmap_fill()' fills a bitmap one 'long' at a time.
It is likely that an exact number of bits is expected.
Use 'bitmap_set()' instead in order not to set unexpected bits.
Fixes: e531f76757 ("net: mvpp2: handle cases where more CPUs are available than s/w threads")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
dmaengine_terminate_all() is deprecated in favor of explicitly saying if
it should be sync or async. Here, we use dmaengine_terminate_sync in
i2c_xfer and i2c_smbus_xfer handlers and rely on
dmaengine_terminate_async within interrupt handlers
(transmission error cases).
dmaengine_synchronize is added within i2c_xfer and i2c_smbus_xfer handler
to finalize terminate started in interrupt handlers.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
In case of receiving a NACK, the dma transfer should be stopped
to avoid feeding data into the FIFO.
Also ensure to properly return the proper error code and avoid
waiting for the end of the dma completion in case of
error happening during the transmission.
Fixes: 7ecc8cfde5 ("i2c: i2c-stm32f7: Add DMA support")
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
When getting an access timeout, ensure that the bus is in a proper
state prior to returning the error.
Fixes: aeb068c572 ("i2c: i2c-stm32f7: add driver")
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Generally, kvm->lock is not taken for a long time, but
sev_lock_two_vms is different: it takes vCPU locks
inside, so userspace can hold it back just by calling
a vCPU ioctl. Play it safe and use mutex_lock_killable.
Message-Id: <20211123005036.2954379-13-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Taking the lock is useless since there are no other references,
and there are already accesses (e.g. to sev->enc_context_owner)
that do not take it. So get rid of it.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211123005036.2954379-12-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
VMs that mirror an encryption context rely on the owner to keep the
ASID allocated. Performing a KVM_CAP_VM_MOVE_ENC_CONTEXT_FROM
would cause a dangling ASID:
1. copy context from A to B (gets ref to A)
2. move context from A to L (moves ASID from A to L)
3. close L (releases ASID from L, B still references it)
The right way to do the handoff instead is to create a fresh mirror VM
on the destination first:
1. copy context from A to B (gets ref to A)
[later] 2. close B (releases ref to A)
3. move context from A to L (moves ASID from A to L)
4. copy context from L to M
So, catch the situation by adding a count of how many VMs are
mirroring this one's encryption context.
Fixes: 0b020f5af0 ("KVM: SEV: Add support for SEV-ES intra host migration")
Message-Id: <20211123005036.2954379-11-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that we have a facility to lock two VMs with deadlock
protection, use it for the creation of mirror VMs as well. One of
COPY_ENC_CONTEXT_FROM(dst, src) and COPY_ENC_CONTEXT_FROM(src, dst)
would always fail, so the combination is nonsensical and it is okay to
return -EBUSY if it is attempted.
This sidesteps the question of what happens if a VM is
MOVE_ENC_CONTEXT_FROM'd at the same time as it is
COPY_ENC_CONTEXT_FROM'd: the locking prevents that from
happening.
Cc: Peter Gonda <pgonda@google.com>
Cc: Sean Christopherson <seanjc@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211123005036.2954379-10-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
I am putting the tests in sev_migrate_tests because the failure conditions are
very similar and some of the setup code can be reused, too.
The tests cover both successful creation of a mirror VM, and error
conditions.
Cc: Peter Gonda <pgonda@google.com>
Cc: Sean Christopherson <seanjc@google.com>
Message-Id: <20211123005036.2954379-9-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allow intra-host migration of a mirror VM; the destination VM will be
a mirror of the same ASID as the source.
Fixes: b56639318b ("KVM: SEV: Add support for SEV intra host migration")
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211123005036.2954379-8-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This was broken before the introduction of KVM_CAP_VM_MOVE_ENC_CONTEXT_FROM,
but technically harmless because the region list was unused for a mirror
VM. However, it is untidy and it now causes a NULL pointer access when
attempting to move the encryption context of a mirror VM.
Fixes: 54526d1fd5 ("KVM: x86: Support KVM VMs sharing SEV context")
Message-Id: <20211123005036.2954379-7-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Encapsulate the handling of the migration_in_progress flag for both VMs in
two functions sev_lock_two_vms and sev_unlock_two_vms. It does not matter
if KVM_CAP_VM_MOVE_ENC_CONTEXT_FROM locks the destination struct kvm a bit
later, and this change 1) keeps the cleanup chain of labels smaller 2)
makes it possible for KVM_CAP_VM_COPY_ENC_CONTEXT_FROM to reuse the logic.
Cc: Peter Gonda <pgonda@google.com>
Cc: Sean Christopherson <seanjc@google.com>
Message-Id: <20211123005036.2954379-6-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
list_replace_init cannot be used if the source is an empty list,
because "new->next->prev = new" will overwrite "old->next":
new old
prev = new, next = new prev = old, next = old
new->next = old->next prev = new, next = old prev = old, next = old
new->next->prev = new prev = new, next = old prev = old, next = new
new->prev = old->prev prev = old, next = old prev = old, next = old
new->next->prev = new prev = old, next = old prev = new, next = new
The desired outcome instead would be to leave both old and new the same
as they were (two empty circular lists). Use list_cut_before, which
already has the necessary check and is documented to discard the
previous contents of the list that will hold the result.
Fixes: b56639318b ("KVM: SEV: Add support for SEV intra host migration")
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211123005036.2954379-5-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, checks for whether VT-d PI can be used refer to the current
status of the feature in the current vCPU; or they more or less pick
vCPU 0 in case a specific vCPU is not available.
However, these checks do not attempt to synchronize with changes to
the IRTE. In particular, there is no path that updates the IRTE when
APICv is re-activated on vCPU 0; and there is no path to wakeup a CPU
that has APICv disabled, if the wakeup occurs because of an IRTE
that points to a posted interrupt.
To fix this, always go through the VT-d PI path as long as there are
assigned devices and APICv is available on both the host and the VM side.
Since the relevant condition was copied over three times, take the hint
and factor it into a separate function.
Suggested-by: Sean Christopherson <seanjc@google.com>
Cc: stable@vger.kernel.org
Reviewed-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Message-Id: <20211123004311.2954158-5-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The IRTE for an assigned device can trigger a POSTED_INTR_VECTOR even
if APICv is disabled on the vCPU that receives it. In that case, the
interrupt will just cause a vmexit and leave the ON bit set together
with the PIR bit corresponding to the interrupt.
Right now, the interrupt would not be delivered until APICv is re-enabled.
However, fixing this is just a matter of always doing the PIR->IRR
synchronization, even if the vCPU has temporarily disabled APICv.
This is not a problem for performance, or if anything it is an
improvement. First, in the common case where vcpu->arch.apicv_active is
true, one fewer check has to be performed. Second, static_call_cond will
elide the function call if APICv is not present or disabled. Finally,
in the case for AMD hardware we can remove the sync_pir_to_irr callback:
it is only needed for apic_has_interrupt_for_ppr, and that function
already has a fallback for !APICv.
Cc: stable@vger.kernel.org
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Message-Id: <20211123004311.2954158-4-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If APICv is disabled for this vCPU, assigned devices may still attempt to
post interrupts. In that case, we need to cancel the vmentry and deliver
the interrupt with KVM_REQ_EVENT. Extend the existing code that handles
injection of L1 interrupts into L2 to cover this case as well.
vmx_hwapic_irr_update is only called when APICv is active so it would be
confusing to add a check for vcpu->arch.apicv_active in there. Instead,
just use vmx_set_rvi directly in vmx_sync_pir_to_irr.
Cc: stable@vger.kernel.org
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211123004311.2954158-3-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A kvm_page_table_test run with its default settings fails on VMX due to
memory region add failure:
> ==== Test Assertion Failure ====
> lib/kvm_util.c:952: ret == 0
> pid=10538 tid=10538 errno=17 - File exists
> 1 0x00000000004057d1: vm_userspace_mem_region_add at kvm_util.c:947
> 2 0x0000000000401ee9: pre_init_before_test at kvm_page_table_test.c:302
> 3 (inlined by) run_test at kvm_page_table_test.c:374
> 4 0x0000000000409754: for_each_guest_mode at guest_modes.c:53
> 5 0x0000000000401860: main at kvm_page_table_test.c:500
> 6 0x00007f82ae2d8554: ?? ??:0
> 7 0x0000000000401894: _start at ??:?
> KVM_SET_USER_MEMORY_REGION IOCTL failed,
> rc: -1 errno: 17
> slot: 1 flags: 0x0
> guest_phys_addr: 0xc0000000 size: 0x40000000
This is because the memory range that this test is trying to add
(0x0c0000000 - 0x100000000) conflicts with LAPIC mapping at 0x0fee00000.
Looking at the code it seems that guest_test_*phys*_mem variable gets
mistakenly overwritten with guest_test_*virt*_mem while trying to adjust
the former for alignment.
With the correct variable adjusted this test runs successfully.
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <52e487458c3172923549bbcf9dfccfbe6faea60b.1637940473.git.maciej.szmigiero@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Account for the '0' being a default, "let KVM choose" period, when
determining whether or not the recovery worker needs to be awakened in
response to userspace reducing the period. Failure to do so results in
the worker not being awakened properly, e.g. when changing the period
from '0' to any small-ish value.
Fixes: 4dfe4f40d8 ("kvm: x86: mmu: Make NX huge page recovery period configurable")
Cc: stable@vger.kernel.org
Cc: Junaid Shahid <junaids@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211120015706.3830341-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Initialize the mask for PKU permissions as if CR4.PKE=0, avoiding
incorrect interpretations of the nested hypervisor's page tables.
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop the "flush" param and return values to/from the TDP MMU's helper for
zapping collapsible SPTEs. Because the helper runs with mmu_lock held
for read, not write, it uses tdp_mmu_zap_spte_atomic(), and the atomic
zap handles the necessary remote TLB flush.
Similarly, because mmu_lock is dropped and re-acquired between zapping
legacy MMUs and zapping TDP MMUs, kvm_mmu_zap_collapsible_sptes() must
handle remote TLB flushes from the legacy MMU before calling into the TDP
MMU.
Fixes: e2209710cc ("KVM: x86/mmu: Skip rmap operations if rmaps not allocated")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211120045046.3940942-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
