Commit Graph

57 Commits

Author SHA1 Message Date
Darrick J. Wong
d9041681dd xfs: set inode sick state flags when we zap either ondisk fork
In a few patches, we'll add some online repair code that tries to
massage the ondisk inode record just enough to get it to pass the inode
verifiers so that we can continue with more file repairs.  Part of that
massaging can include zapping the ondisk forks to clear errors.  After
that point, the bmap fork repair functions will rebuild the zapped
forks.

Christoph asked for stronger protections against online repair zapping a
fork to get the inode to load vs. other threads trying to access the
partially repaired file.  Do this by adding a special "[DA]FORK_ZAPPED"
inode health flag whenever repair zaps a fork, and sprinkling checks for
that flag into the various file operations for things that don't like
handling an unexpected zero-extents fork.

In practice xfs_scrub will scrub and fix the forks almost immediately
after zapping them, so the window is very small.  However, if a crash or
unmount should occur, we can still detect these zapped inode forks by
looking for a zero-extents fork when data was expected.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2023-12-15 10:03:35 -08:00
Linus Torvalds
7352a6765c vfs-6.7.xattr
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZTppWAAKCRCRxhvAZXjc
 okB2AP4jjoRErJBwj245OIDJqzoj4m4UVOVd0MH2AkiSpANczwD/TToChdpusY2y
 qAYg1fQoGMbDVlb7Txaj9qI9ieCf9w0=
 =2PXg
 -----END PGP SIGNATURE-----

Merge tag 'vfs-6.7.xattr' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs

Pull vfs xattr updates from Christian Brauner:
 "The 's_xattr' field of 'struct super_block' currently requires a
  mutable table of 'struct xattr_handler' entries (although each handler
  itself is const). However, no code in vfs actually modifies the
  tables.

  This changes the type of 's_xattr' to allow const tables, and modifies
  existing file systems to move their tables to .rodata. This is
  desirable because these tables contain entries with function pointers
  in them; moving them to .rodata makes it considerably less likely to
  be modified accidentally or maliciously at runtime"

* tag 'vfs-6.7.xattr' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (30 commits)
  const_structs.checkpatch: add xattr_handler
  net: move sockfs_xattr_handlers to .rodata
  shmem: move shmem_xattr_handlers to .rodata
  overlayfs: move xattr tables to .rodata
  xfs: move xfs_xattr_handlers to .rodata
  ubifs: move ubifs_xattr_handlers to .rodata
  squashfs: move squashfs_xattr_handlers to .rodata
  smb: move cifs_xattr_handlers to .rodata
  reiserfs: move reiserfs_xattr_handlers to .rodata
  orangefs: move orangefs_xattr_handlers to .rodata
  ocfs2: move ocfs2_xattr_handlers and ocfs2_xattr_handler_map to .rodata
  ntfs3: move ntfs_xattr_handlers to .rodata
  nfs: move nfs4_xattr_handlers to .rodata
  kernfs: move kernfs_xattr_handlers to .rodata
  jfs: move jfs_xattr_handlers to .rodata
  jffs2: move jffs2_xattr_handlers to .rodata
  hfsplus: move hfsplus_xattr_handlers to .rodata
  hfs: move hfs_xattr_handlers to .rodata
  gfs2: move gfs2_xattr_handlers_max to .rodata
  fuse: move fuse_xattr_handlers to .rodata
  ...
2023-10-30 09:29:44 -10:00
Wedson Almeida Filho
375aa21d36
xfs: move xfs_xattr_handlers to .rodata
This makes it harder for accidental or malicious changes to
xfs_xattr_handlers at runtime.

Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: linux-xfs@vger.kernel.org
Signed-off-by: Wedson Almeida Filho <walmeida@microsoft.com>
Link: https://lore.kernel.org/r/20230930050033.41174-27-wedsonaf@gmail.com
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-10-10 13:49:20 +02:00
Darrick J. Wong
34389616a9 xfs: require a relatively recent V5 filesystem for LARP mode
While reviewing the FIEXCHANGE code in XFS, I realized that the function
that enables logged xattrs doesn't actually check that the superblock
has a LOG_INCOMPAT feature bit field.  Add a check to refuse the
operation if we don't have a V5 filesystem...

...but on second though, let's require either reflink or rmap so that we
only have to deal with LARP mode on relatively /modern/ kernel.  4.14 is
about as far back as I feel like going.

Seeing as LARP is a debugging-only option anyway, this isn't likely to
affect any real users.

Fixes: d9c61ccb3b ("xfs: move xfs_attr_use_log_assist out of xfs_log.c")
Really-Fixes: f3f36c893f ("xfs: Add xfs_attr_set_deferred and xfs_attr_remove_deferred")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Bill O'Donnell <bodonnel@redhat.com>
2023-09-12 10:31:08 -07:00
Christian Brauner
0c95c025a0
fs: drop unused posix acl handlers
Remove struct posix_acl_{access,default}_handler for all filesystems
that don't depend on the xattr handler in their inode->i_op->listxattr()
method in any way. There's nothing more to do than to simply remove the
handler. It's been effectively unused ever since we introduced the new
posix acl api.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2023-03-06 09:57:12 +01:00
Christian Brauner
39f60c1cce
fs: port xattr to mnt_idmap
Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2023-01-19 09:24:28 +01:00
Darrick J. Wong
fd5beaff25 xfs: use memcpy, not strncpy, to format the attr prefix during listxattr
When -Wstringop-truncation is enabled, the compiler complains about
truncation of the null byte at the end of the xattr name prefix.  This
is intentional, since we're concatenating the two strings together and
do _not_ want a null byte in the middle of the name.

We've already ensured that the name buffer is long enough to handle
prefix and name, and the prefix_len is supposed to be the length of the
prefix string without the null byte, so use memcpy here instead.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
2022-11-30 08:55:18 -08:00
Darrick J. Wong
f4288f0182 xfs: fix TOCTOU race involving the new logged xattrs control knob
I found a race involving the larp control knob, aka the debugging knob
that lets developers enable logging of extended attribute updates:

Thread 1			Thread 2

echo 0 > /sys/fs/xfs/debug/larp
				setxattr(REPLACE)
				xfs_has_larp (returns false)
				xfs_attr_set

echo 1 > /sys/fs/xfs/debug/larp

				xfs_attr_defer_replace
				xfs_attr_init_replace_state
				xfs_has_larp (returns true)
				xfs_attr_init_remove_state

				<oops, wrong DAS state!>

This isn't a particularly severe problem right now because xattr logging
is only enabled when CONFIG_XFS_DEBUG=y, and developers *should* know
what they're doing.

However, the eventual intent is that callers should be able to ask for
the assistance of the log in persisting xattr updates.  This capability
might not be required for /all/ callers, which means that dynamic
control must work correctly.  Once an xattr update has decided whether
or not to use logged xattrs, it needs to stay in that mode until the end
of the operation regardless of what subsequent parallel operations might
do.

Therefore, it is an error to continue sampling xfs_globals.larp once
xfs_attr_change has made a decision about larp, and it was not correct
for me to have told Allison that ->create_intent functions can sample
the global log incompat feature bitfield to decide to elide a log item.

Instead, create a new op flag for the xfs_da_args structure, and convert
all other callers of xfs_has_larp and xfs_sb_version_haslogxattrs within
the attr update state machine to look for the operations flag.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
2022-06-15 23:13:32 -07:00
Darrick J. Wong
efc2efeba1 xfs: move xfs_attr_use_log_assist usage out of libxfs
The LARP patchset added an awkward coupling point between libxfs and
what would be libxlog, if the XFS log were actually its own library.
Move the code that sets up logged xattr updates out of libxfs and into
xfs_xattr.c so that libxfs no longer has to know about xlog_* functions.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2022-05-27 10:34:04 +10:00
Darrick J. Wong
d9c61ccb3b xfs: move xfs_attr_use_log_assist out of xfs_log.c
The LARP patchset added an awkward coupling point between libxfs and
what would be libxlog, if the XFS log were actually its own library.
Move the code that enables logged xattr updates out of "lib"xlog and into
xfs_xattr.c so that it no longer has to know about xlog_* functions.

While we're at it, give xfs_xattr.c its own header file.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2022-05-27 10:33:29 +10:00
Dave Chinner
e0c41089b9 xfs: separate out initial attr_set states
We current use XFS_DAS_UNINIT for several steps in the attr_set
state machine. We use it for setting shortform xattrs, converting
from shortform to leaf, leaf add, leaf-to-node and leaf add. All of
these things are essentially known before we start the state machine
iterating, so we really should separate them out:

XFS_DAS_SF_ADD:
	- tries to do a shortform add
	- on success -> done
	- on ENOSPC converts to leaf, -> XFS_DAS_LEAF_ADD
	- on error, dies.

XFS_DAS_LEAF_ADD:
	- tries to do leaf add
	- on success:
		- inline attr -> done
		- remote xattr || REPLACE -> XFS_DAS_FOUND_LBLK
	- on ENOSPC converts to node, -> XFS_DAS_NODE_ADD
	- on error, dies

XFS_DAS_NODE_ADD:
	- tries to do node add
	- on success:
		- inline attr -> done
		- remote xattr || REPLACE -> XFS_DAS_FOUND_NBLK
	- on error, dies

This makes it easier to understand how the state machine starts
up and sets us up on the path to further state machine
simplifications.

This also converts the DAS state tracepoints to use strings rather
than numbers, as converting between enums and numbers requires
manual counting rather than just reading the name.

This also introduces a XFS_DAS_DONE state so that we can trace
successful operation completions easily.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson<allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2022-05-12 15:12:52 +10:00
Darrick J. Wong
383e32b0d0 xfs: prevent metadata files from being inactivated
Files containing metadata (quota records, rt bitmap and summary info)
are fully managed by the filesystem, which means that all resource
cleanup must be explicit, not automatic.  This means that they should
never be subjected automatic to post-eof truncation, nor should they be
freed automatically even if the link count drops to zero.

In other words, xfs_inactive() should leave these files alone.  Add the
necessary predicate functions to make this happen.  This adds a second
layer of prevention for the kinds of fs corruption that was fixed by
commit f4c32e87de.  If we ever decide to support removing metadata
files, we should make all those metadata updates explicit.

Rearrange the order of #includes to fix compiler errors, since
xfs_mount.h is supposed to be included before xfs_inode.h

Followup-to: f4c32e87de ("xfs: fix realtime bitmap/summary file truncation when growing rt volume")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2021-03-25 16:47:50 -07:00
Christian Brauner
e65ce2a50c
acl: handle idmapped mounts
The posix acl permission checking helpers determine whether a caller is
privileged over an inode according to the acls associated with the
inode. Add helpers that make it possible to handle acls on idmapped
mounts.

The vfs and the filesystems targeted by this first iteration make use of
posix_acl_fix_xattr_from_user() and posix_acl_fix_xattr_to_user() to
translate basic posix access and default permissions such as the
ACL_USER and ACL_GROUP type according to the initial user namespace (or
the superblock's user namespace) to and from the caller's current user
namespace. Adapt these two helpers to handle idmapped mounts whereby we
either map from or into the mount's user namespace depending on in which
direction we're translating.
Similarly, cap_convert_nscap() is used by the vfs to translate user
namespace and non-user namespace aware filesystem capabilities from the
superblock's user namespace to the caller's user namespace. Enable it to
handle idmapped mounts by accounting for the mount's user namespace.

In addition the fileystems targeted in the first iteration of this patch
series make use of the posix_acl_chmod() and, posix_acl_update_mode()
helpers. Both helpers perform permission checks on the target inode. Let
them handle idmapped mounts. These two helpers are called when posix
acls are set by the respective filesystems to handle this case we extend
the ->set() method to take an additional user namespace argument to pass
the mount's user namespace down.

Link: https://lore.kernel.org/r/20210121131959.646623-9-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-24 14:27:17 +01:00
Chen Zhou
3d60548b21 xfs: remove duplicate headers
Remove duplicate headers which are included twice.

Signed-off-by: Chen Zhou <chenzhou10@huawei.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-05-08 08:51:34 -07:00
Christoph Hellwig
e3a19cdea8 xfs: embedded the attrlist cursor into struct xfs_attr_list_context
The attrlist cursor only exists as part of an attr list context, so
embedd the structure instead of pointing to it.  Also give it a proper
xfs_ prefix and remove the obsolete typedef.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-03-02 20:55:55 -08:00
Christoph Hellwig
d5f0f49a9b xfs: clean up the attr flag confusion
The ATTR_* flags have a long IRIX history, where they a userspace
interface, the on-disk format and an internal interface.  We've split
out the on-disk interface to the XFS_ATTR_* values, but despite (or
because?) of that the flag have still been a mess.  Switch the
internal interface to pass the on-disk XFS_ATTR_* flags for the
namespace and the Linux XATTR_* flags for the actual flags instead.
The ATTR_* values that are actually used are move to xfs_fs.h with a
new XFS_IOC_* prefix to not conflict with the userspace version that
has the same name and must have the same value.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-03-02 20:55:55 -08:00
Christoph Hellwig
5a3930e27e xfs: improve xfs_forget_acl
Move the function to xfs_acl.c and provide a proper stub for the
!CONFIG_XFS_POSIX_ACL case.  Lift the flags check to the caller as it
nicely fits in there.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-03-02 20:55:55 -08:00
Christoph Hellwig
17e1dd83ea xfs: rename xfs_attr_list_int to xfs_attr_list
The version taking the context structure is the main interface to list
attributes, so drop the _int postfix.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-03-02 20:55:54 -08:00
Christoph Hellwig
a9c8c69b49 xfs: cleanup struct xfs_attr_list_context
Replace the alist char pointer with a void buffer given that different
callers use it in different ways.  Use the chance to remove the typedef
and reduce the indentation of the struct definition so that it doesn't
overflow 80 char lines all over.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-03-02 20:55:54 -08:00
Christoph Hellwig
e513e25c38 xfs: remove ATTR_KERNOVAL
We can just pass down the Linux convention of a zero valuelen to just
query for the existance of an attribute to the low-level code instead.
The use in the legacy xfs_attr_list code only used by the ioctl
interface was already dead code, as the callers check that the flag
is not present.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-03-02 20:55:53 -08:00
Christoph Hellwig
e5171d7e98 xfs: pass an initialized xfs_da_args to xfs_attr_get
Instead of converting from one style of arguments to another in
xfs_attr_set, pass the structure from higher up in the call chain.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-03-02 20:55:53 -08:00
Christoph Hellwig
a254462243 xfs: pass an initialized xfs_da_args structure to xfs_attr_set
Instead of converting from one style of arguments to another in
xfs_attr_set, pass the structure from higher up in the call chain.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-03-02 20:55:53 -08:00
Christoph Hellwig
0eb81a5f5c xfs: merge xfs_attr_remove into xfs_attr_set
The Linux xattr and acl APIs use a single call for set and remove.
Modify the high-level XFS API to match that and let xfs_attr_set handle
removing attributes as well.  With a little bit of reordering this
removes a lot of code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-03-02 20:55:52 -08:00
Allison Henderson
d29f781c32 xfs: Remove all strlen in all xfs_attr_* functions for attr names.
This helps to pre-simplify the extra handling of the null terminator in
delayed operations which use memcpy rather than strlen.  Later
when we introduce parent pointers, attribute names will become binary,
so strlen will not work at all.  Removing uses of strlen now will
help reduce complexities later

Signed-off-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-01-09 10:55:19 -08:00
Christoph Hellwig
8cde9f259c xfs: also remove cached ACLs when removing the underlying attr
We should not just invalidate the ACL when setting the underlying
attribute, but also when removing it.  The ioctl interface gets that
right, but the normal xattr inteface skipped the xfs_forget_acl due
to an early return.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-01-09 10:55:18 -08:00
Darrick J. Wong
5f213ddbcb xfs: fix missing header includes
Some of the xfs source files are missing header includes, so add them
back.  Sparse complains about non-static functions that don't have a
forward declaration anywhere.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-11-07 13:00:53 -08:00
Dave Chinner
ddbca70cc4 xfs: allocate xattr buffer on demand
When doing file lookups and checking for permissions, we end up in
xfs_get_acl() to see if there are any ACLs on the inode. This
requires and xattr lookup, and to do that we have to supply a buffer
large enough to hold an maximum sized xattr.

On workloads were we are accessing a wide range of cache cold files
under memory pressure (e.g. NFS fileservers) we end up spending a
lot of time allocating the buffer. The buffer is 64k in length, so
is a contiguous multi-page allocation, and if that then fails we
fall back to vmalloc(). Hence the allocation here is /expensive/
when we are looking up hundreds of thousands of files a second.

Initial numbers from a bpf trace show average time in xfs_get_acl()
is ~32us, with ~19us of that in the memory allocation. Note these
are average times, so there are going to be affected by the worst
case allocations more than the common fast case...

To avoid this, we could just do a "null"  lookup to see if the ACL
xattr exists and then only do the allocation if it exists. This,
however, optimises the path for the "no ACL present" case at the
expense of the "acl present" case. i.e. we can halve the time in
xfs_get_acl() for the no acl case (i.e down to ~10-15us), but that
then increases the ACL case by 30% (i.e. up to 40-45us).

To solve this and speed up both cases, drive the xattr buffer
allocation into the attribute code once we know what the actual
xattr length is. For the no-xattr case, we avoid the allocation
completely, speeding up that case. For the common ACL case, we'll
end up with a fast heap allocation (because it'll be smaller than a
page), and only for the rarer "we have a remote xattr" will we have
a multi-page allocation occur. Hence the common ACL case will be
much faster, too.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-08-30 22:43:57 -07:00
Eric Sandeen
250d4b4c40 xfs: remove unused header files
There are many, many xfs header files which are included but
unneeded (or included twice) in the xfs code, so remove them.

nb: xfs_linux.h includes about 9 headers for everyone, so those
explicit includes get removed by this.  I'm not sure what the
preference is, but if we wanted explicit includes everywhere,
a followup patch could remove those xfs_*.h includes from
xfs_linux.h and move them into the files that need them.
Or it could be left as-is.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-06-28 19:30:43 -07:00
Darrick J. Wong
5467b34bd1 xfs: move xfs_ino_geometry to xfs_shared.h
The inode geometry structure isn't related to ondisk format; it's
support for the mount structure.  Move it to xfs_shared.h.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-06-28 19:25:35 -07:00
Darrick J. Wong
3b50086f0c xfs: don't overflow xattr listent buffer
For VFS listxattr calls, xfs_xattr_put_listent calls
__xfs_xattr_put_listent twice if it sees an attribute
"trusted.SGI_ACL_FILE": once for that name, and again for
"system.posix_acl_access".  Unfortunately, if we happen to run out of
buffer space while emitting the first name, we set count to -1 (so that
we can feed ERANGE to the caller).  The second invocation doesn't check that
the context parameters make sense and overwrites the byte before the
buffer, triggering a KASAN report:

==================================================================
BUG: KASAN: slab-out-of-bounds in strncpy+0xb3/0xd0
Write of size 1 at addr ffff88807fbd317f by task syz/1113

CPU: 3 PID: 1113 Comm: syz Not tainted 5.0.0-rc6-xfsx #rc6
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.10.2-1ubuntu1 04/01/2014
Call Trace:
 dump_stack+0xcc/0x180
 print_address_description+0x6c/0x23c
 kasan_report.cold.3+0x1c/0x35
 strncpy+0xb3/0xd0
 __xfs_xattr_put_listent+0x1a9/0x2c0 [xfs]
 xfs_attr_list_int_ilocked+0x11af/0x1800 [xfs]
 xfs_attr_list_int+0x20c/0x2e0 [xfs]
 xfs_vn_listxattr+0x225/0x320 [xfs]
 listxattr+0x11f/0x1b0
 path_listxattr+0xbd/0x130
 do_syscall_64+0x139/0x560

While we're at it we add an assert to the other put_listent to avoid
this sort of thing ever happening to the attrlist_by_handle code.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-02-14 09:36:52 -08:00
Dave Chinner
0b61f8a407 xfs: convert to SPDX license tags
Remove the verbose license text from XFS files and replace them
with SPDX tags. This does not change the license of any of the code,
merely refers to the common, up-to-date license files in LICENSES/

This change was mostly scripted. fs/xfs/Makefile and
fs/xfs/libxfs/xfs_fs.h were modified by hand, the rest were detected
and modified by the following command:

for f in `git grep -l "GNU General" fs/xfs/` ; do
	echo $f
	cat $f | awk -f hdr.awk > $f.new
	mv -f $f.new $f
done

And the hdr.awk script that did the modification (including
detecting the difference between GPL-2.0 and GPL-2.0+ licenses)
is as follows:

$ cat hdr.awk
BEGIN {
	hdr = 1.0
	tag = "GPL-2.0"
	str = ""
}

/^ \* This program is free software/ {
	hdr = 2.0;
	next
}

/any later version./ {
	tag = "GPL-2.0+"
	next
}

/^ \*\// {
	if (hdr > 0.0) {
		print "// SPDX-License-Identifier: " tag
		print str
		print $0
		str=""
		hdr = 0.0
		next
	}
	print $0
	next
}

/^ \* / {
	if (hdr > 1.0)
		next
	if (hdr > 0.0) {
		if (str != "")
			str = str "\n"
		str = str $0
		next
	}
	print $0
	next
}

/^ \*/ {
	if (hdr > 0.0)
		next
	print $0
	next
}

// {
	if (hdr > 0.0) {
		if (str != "")
			str = str "\n"
		str = str $0
		next
	}
	print $0
}

END { }
$

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-06-06 14:17:53 -07:00
Eric Sandeen
f7a136aee3 xfs: several xattr functions can be void
There are a handful of xattr functions which now return
nothing but zero.  They can be made void, chased through calling
functions, and error handling etc can be removed.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-12-05 12:32:14 +11:00
Artem Savkov
791cc43b36 Make __xfs_xattr_put_listen preperly report errors.
Commit 2a6fba6 "xfs: only return -errno or success from attr ->put_listent"
changes the returnvalue of __xfs_xattr_put_listen to 0 in case when there is
insufficient space in the buffer assuming that setting context->count to -1
would be enough, but all of the ->put_listent callers only check seen_enough.
This results in a failed assertion:
XFS: Assertion failed: context->count >= 0, file: fs/xfs/xfs_xattr.c, line: 175
in insufficient buffer size case.

This is only reproducible with at least 2 xattrs and only when the buffer
gets depleted before the last one.

Furthermore if buffersize is such that it is enough to hold the last xattr's
name, but not enough to hold the sum of preceeding xattr names listxattr won't
fail with ERANGE, but will suceed returning last xattr's name without the
first character. The first character end's up overwriting data stored at
(context->alist - 1).

Signed-off-by: Artem Savkov <asavkov@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-09-14 07:40:35 +10:00
Linus Torvalds
d102a56edb Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs fixes from Al Viro:
 "Followups to the parallel lookup work:

   - update docs

   - restore killability of the places that used to take ->i_mutex
     killably now that we have down_write_killable() merged

   - Additionally, it turns out that I missed a prerequisite for
     security_d_instantiate() stuff - ->getxattr() wasn't the only thing
     that could be called before dentry is attached to inode; with smack
     we needed the same treatment applied to ->setxattr() as well"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  switch ->setxattr() to passing dentry and inode separately
  switch xattr_handler->set() to passing dentry and inode separately
  restore killability of old mutex_lock_killable(&inode->i_mutex) users
  add down_write_killable_nested()
  update D/f/directory-locking
2016-05-27 17:14:05 -07:00
Al Viro
5930122683 switch xattr_handler->set() to passing dentry and inode separately
preparation for similar switch in ->setxattr() (see the next commit for
rationale).

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-05-27 15:39:43 -04:00
Linus Torvalds
0b9210c9c8 xfs: update for 4.7-rc1
Changes in this update:
 o fixes for mount line parsing, sparse warnings, read-only compat
   feature remount behaviour
 o allow fast path symlink lookups for inline symlinks.
 o attribute listing cleanups
 o writeback goes direct to bios rather than indirecting through
   bufferheads
 o transaction allocation cleanup
 o optimised kmem_realloc
 o added configurable error handling for metadata write errors,
   changed default error handling behaviour from "retry forever" to
   "retry until unmount then fail"
 o fixed several inode cluster writeback lookup vs reclaim race
   conditions
 o fixed inode cluster writeback checking wrong inode after lookup
 o fixed bugs where struct xfs_inode freeing wasn't actually RCU safe
 o cleaned up inode reclaim tagging
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXRo8LAAoJEK3oKUf0dfodxLgP+wQMd46i/nCncr6jMcdoVXfL
 rE6cL1LJWWVOWzax/bmdlV1VNXqqW7n0ABAVMqikzqSEd+fBQe/HOkdBeVUywu7o
 bmqgNxuofMqHaiYhiTvUijHLHWLFxIgd/jNT7L5oGRzZdmP260VGf3EPipN7aA9U
 Y3KVhFQCqohpeIUeSV4Z/eIDdHN5LyUI1s+7zMLquHKCWyO4aO4GBX8YlyXdRRVe
 cwCZb4TBryS0PBCIra31MZ5wBRwLx8PBXqcNsnTQSR5Uu+WeuwxofXz5q3kdmNOU
 XGTWiabQbcvaC4twrzqnErHEX41PAs43tWxsI/qJH49QIFdfOYM+t8ERhEa2Q3DW
 Ihl+Q/2qiOuZZterG/t5MrxhybrmQhEFVJT6Ib8b/CnwpRm+K8kWTead1YJL8Xzd
 F9k8e57BCgTbDA7jWxWDbp7eQ1/4KglBD4sefFPpsuFgO882mmo5GmymALGjmitw
 JH1v3HL3PeTkQoHfcay8ZM/zNjX643CXHwCWYEOAgD+e77TPiOs/cHLZaXbrBkLK
 PpSJNfYiBe31eeSOEGsxivMapLpus+cHZyK3uR+XU+naJhjOdaBDTTo8RsAD9jS5
 C/dzxc4l7o+gYT+UjV5KtyfEeVwtGo5mtR9XozPbNDjNQor8Vo6NQMZXMXpFYDZI
 2XgzVNpkEf/74kexdEzV
 =0tYo
 -----END PGP SIGNATURE-----

Merge tag 'xfs-for-linus-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs

Pull xfs updates from Dave Chinner:
 "A pretty average collection of fixes, cleanups and improvements in
  this request.

  Summary:
   - fixes for mount line parsing, sparse warnings, read-only compat
     feature remount behaviour
   - allow fast path symlink lookups for inline symlinks.
   - attribute listing cleanups
   - writeback goes direct to bios rather than indirecting through
     bufferheads
   - transaction allocation cleanup
   - optimised kmem_realloc
   - added configurable error handling for metadata write errors,
     changed default error handling behaviour from "retry forever" to
     "retry until unmount then fail"
   - fixed several inode cluster writeback lookup vs reclaim race
     conditions
   - fixed inode cluster writeback checking wrong inode after lookup
   - fixed bugs where struct xfs_inode freeing wasn't actually RCU safe
   - cleaned up inode reclaim tagging"

* tag 'xfs-for-linus-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (39 commits)
  xfs: fix warning in xfs_finish_page_writeback for non-debug builds
  xfs: move reclaim tagging functions
  xfs: simplify inode reclaim tagging interfaces
  xfs: rename variables in xfs_iflush_cluster for clarity
  xfs: xfs_iflush_cluster has range issues
  xfs: mark reclaimed inodes invalid earlier
  xfs: xfs_inode_free() isn't RCU safe
  xfs: optimise xfs_iext_destroy
  xfs: skip stale inodes in xfs_iflush_cluster
  xfs: fix inode validity check in xfs_iflush_cluster
  xfs: xfs_iflush_cluster fails to abort on error
  xfs: remove xfs_fs_evict_inode()
  xfs: add "fail at unmount" error handling configuration
  xfs: add configuration handlers for specific errors
  xfs: add configuration of error failure speed
  xfs: introduce table-based init for error behaviors
  xfs: add configurable error support to metadata buffers
  xfs: introduce metadata IO error class
  xfs: configurable error behavior via sysfs
  xfs: buffer ->bi_end_io function requires irq-safe lock
  ...
2016-05-26 10:13:40 -07:00
Al Viro
b296821a7c xattr_handler: pass dentry and inode as separate arguments of ->get()
... and do not assume they are already attached to each other

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-04-10 20:48:24 -04:00
Eric Sandeen
e5bd12bfea xfs: don't pass value into attr ->put_listent
The value is not used; only names and value lengths are
returned.  Remove the argument.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-04-06 07:57:32 +10:00
Eric Sandeen
2a6fba6d23 xfs: only return -errno or success from attr ->put_listent
Today, the put_listent formatters return either 1 or 0; if
they return 1, some callers treat this as an error and return
it up the stack, despite "1" not being a valid (negative)
error code.

The intent seems to be that if the input buffer is full,
we set seen_enough or set count = -1, and return 1;
but some callers check the return before checking the
seen_enough or count fields of the context.

Fix this by only returning non-zero for actual errors
encountered, and rely on the caller to first check the
return value, then check the values in the context to
decide what to do.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-04-06 07:57:18 +10:00
Andreas Gruenbacher
5d92b75c75 xfs: Change how listxattr generates synthetic attributes
Instead of adding the synthesized POSIX ACL attribute names after listing all
non-synthesized attributes, generate them immediately when listing the
non-synthesized attributes.

In addition, merge xfs_xattr_put_listent and xfs_xattr_put_listent_sizes to
ensure that the list size is computed correctly; the split version was
overestimating the list size for non-root users.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: xfs@oss.sgi.com
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-12-06 21:34:16 -05:00
Andreas Gruenbacher
98e9cb5711 vfs: Distinguish between full xattr names and proper prefixes
Add an additional "name" field to struct xattr_handler.  When the name
is set, the handler matches attributes with exactly that name.  When the
prefix is set instead, the handler matches attributes with the given
prefix and with a non-empty suffix.

This patch should avoid bugs like the one fixed in commit c361016a in
the future.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-12-06 21:33:52 -05:00
Andreas Gruenbacher
97d7929922 posix acls: Remove duplicate xattr name definitions
Remove POSIX_ACL_XATTR_{ACCESS,DEFAULT} and GFS2_POSIX_ACL_{ACCESS,DEFAULT}
and replace them with the definitions in <include/uapi/linux/xattr.h>.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-12-06 21:25:17 -05:00
Linus Torvalds
5d2eb548b3 Merge branch 'for-linus-3' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs xattr cleanups from Al Viro.

* 'for-linus-3' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  f2fs: xattr simplifications
  squashfs: xattr simplifications
  9p: xattr simplifications
  xattr handlers: Pass handler to operations instead of flags
  jffs2: Add missing capability check for listing trusted xattrs
  hfsplus: Remove unused xattr handler list operations
  ubifs: Remove unused security xattr handler
  vfs: Fix the posix_acl_xattr_list return value
  vfs: Check attribute names in posix acl xattr handers
2015-11-13 18:02:30 -08:00
Andreas Gruenbacher
d9a82a0403 xattr handlers: Pass handler to operations instead of flags
The xattr_handler operations are currently all passed a file system
specific flags value which the operations can use to disambiguate between
different handlers; some file systems use that to distinguish the xattr
namespace, for example.  In some oprations, it would be useful to also have
access to the handler prefix.  To allow that, pass a pointer to the handler
to operations instead of the flags value alone.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-13 20:34:32 -05:00
Andreas Gruenbacher
47e1bf6405 xfs: invalidate cached acl if set via ioctl
Setting or removing the "SGI_ACL_[FILE|DEFAULT]" attributes via the
XFS_IOC_ATTRMULTI_BY_HANDLE ioctl completely bypasses the POSIX ACL
infrastructure, like setting the "trusted.SGI_ACL_[FILE|DEFAULT]" xattrs
did until commit 6caa1056.  Similar to that commit, invalidate cached
acls when setting/removing them via the ioctl as well.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-11-03 12:56:17 +11:00
Brian Foster
67d8e04e34 xfs: invalidate cached acl if set directly via xattr
ACLs are stored as extended attributes of the inode to which they apply.
XFS converts the standard "system.posix_acl_[access|default]" attribute
names used to control ACLs to "trusted.SGI_ACL_[FILE|DEFAULT]" as stored
on-disk. These xattrs are directly exposed in on-disk format via
getxattr/setxattr, without any ACL aware code in the path to perform
validation, etc. This is partly historical and supports backup/restore
applications such as xfsdump to back up and restore the binary blob that
represents ACLs as-is.

Andreas reports that the ACLs observed via the getfacl interface is not
consistent when ACLs are set directly via the setxattr path. This occurs
because the ACLs are cached in-core against the inode and the xattr path
has no knowledge that the operation relates to ACLs.

Update the xattr set codepath to trap writes of the special XFS ACL
attributes and invalidate the associated cached ACL when this occurs.
This ensures that the correct ACLs are used on a subsequent operation
through the actual ACL interface.

Note that this does not update or add support for setting the ACL xattrs
directly beyond the restore use case that requires a correctly formatted
binary blob and to restore a consistent i_mode at the same time. It is
still possible for a root user to set an invalid or inconsistent (with
i_mode) ACL blob on-disk and potentially cause corruption.

[ With fixes from Andreas Gruenbacher. ]

Reported-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-11-03 12:40:59 +11:00
David Howells
2b0143b5c9 VFS: normal filesystems (and lustre): d_inode() annotations
that's the bulk of filesystem drivers dealing with inodes of their own

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-15 15:06:57 -04:00
Christoph Hellwig
bb58e6188a xfs: move most of xfs_sb.h to xfs_format.h
More on-disk format consolidation.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-11-28 14:27:09 +11:00
Christoph Hellwig
4fb6e8ade2 xfs: merge xfs_ag.h into xfs_format.h
More on-disk format consolidation.  A few declarations that weren't on-disk
format related move into better suitable spots.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-11-28 14:25:04 +11:00
Dave Chinner
2451337dd0 xfs: global error sign conversion
Convert all the errors the core XFs code to negative error signs
like the rest of the kernel and remove all the sign conversion we
do in the interface layers.

Errors for conversion (and comparison) found via searches like:

$ git grep " E" fs/xfs
$ git grep "return E" fs/xfs
$ git grep " E[A-Z].*;$" fs/xfs

Negation points found via searches like:

$ git grep "= -[a-z,A-Z]" fs/xfs
$ git grep "return -[a-z,A-D,F-Z]" fs/xfs
$ git grep " -[a-z].*;" fs/xfs

[ with some bits I missed from Brian Foster ]

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-06-25 14:58:08 +10:00