This patch adds a new dlm message DLM_BEGIN_EXIT_DOMAIN_MSG and ups the dlm
protocol to 1.2.
o2dlm sends this new message in dlm_unregister_domain() to mark the beginning
of the exit domain. This message is sent to all nodes in the domain.
Currently o2dlm has no way of informing other nodes of its impending exit.
This information is useful as the other nodes could disregard the exiting
node in certain operations. For example, in resource migration. If two or
more nodes were umounting in parallel, it would be more efficient if o2dlm
were to choose a non-exiting node to be the new master node rather than an
exiting one.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Reviewed-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
mlog_exit is used to record the exit status of a function.
But because it is added in so many functions, if we enable it,
the system logs get filled up quickly and cause too much I/O.
So actually no one can open it for a production system or even
for a test.
This patch just try to remove it or change it. So:
1. if all the error paths already use mlog_errno, it is just removed.
Otherwise, it will be replaced by mlog_errno.
2. if it is used to print some return value, it is replaced with
mlog(0,...).
mlog_exit_ptr is changed to mlog(0.
All those mlog(0,...) will be replaced with trace events later.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
ENTRY is used to record the entry of a function.
But because it is added in so many functions, if we enable it,
the system logs get filled up quickly and cause too much I/O.
So actually no one can open it for a production system or even
for a test.
So for mlog_entry_void, we just remove it.
for mlog_entry(...), we replace it with mlog(0,...), and they
will be replace by trace event later.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
In the following situation, there remains an incorrect bit in refmap on the
recovery master. Finally the recovery master will fail at purging the lockres
due to the incorrect bit in refmap.
1) node A has no interest on lockres A any longer, so it is purging it.
2) the owner of lockres A is node B, so node A is sending de-ref message
to node B.
3) at this time, node B crashed. node C becomes the recovery master. it recovers
lockres A(because the master is the dead node B).
4) node A migrated lockres A to node C with a refbit there.
5) node A failed to send de-ref message to node B because it crashed. The failure
is ignored. no other action is done for lockres A any more.
For mormal, re-send the deref message to it to recovery master can fix it. Well,
ignoring the failure of deref to the original master and not recovering the lockres
to recovery master has the same effect. And the later is simpler.
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Acked-by: Srinivas Eeda <srinivas.eeda@oracle.com>
Cc: stable@kernel.org
Signed-off-by: Joel Becker <joel.becker@oracle.com>
dlm->recovery_map is defined as
unsigned long recovery_map[BITS_TO_LONGS(O2NM_MAX_NODES)];
We should treat O2NM_MAX_NODES as the bit map size in bits.
This patches fixes a bit operation that takes O2NM_MAX_NODES + 1 as bitmap size.
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Print the node number of a peer node if sending it a message failed.
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
If a node down event happens while dlm shutdown in progress, dlm recovery
should be done before dlm is shutdown. We can't migrate unrecovered locks,
obviously. But dlm_reco_thread only does recovery if the dlm_state is
in DLM_CTXT_JOINED.
dlm_reco_thread should do recovery if dlm_state is in DLM_CTXT_JOINED or
DLM_CTXT_IN_SHUTDOWN.
Signed-off-by: Srinivas Eeda <srinivas.eeda@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
During recovery, the dlm frees the locks for the dead node. If it finds a
lock in a resource for the dead node, it expects that node to also have a
ref in that lock resource. If not, it BUGs.
ossbz#1175 was filed with the above BUG. Now, while it is correct that we
should be expecting the ref, I see no reason why we have to BUG. After all,
we are freeing up the lock and clearing the ref.
This patch replaces the BUG_ON with a printk(). Hopefully, that will give
us more clues next time this happens.
http://oss.oracle.com/bugzilla/show_bug.cgi?id=1175
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Acked-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Mainline commit aad1b15310 made the
dlm_begin_reco_handler() return -EAGAIN instead of EAGAIN.
As this error is transmitted over the wire, we want the receiver,
dlm_send_begin_reco_message(), to understand both the older EAGAIN and
the newer -EAGAIN, to allow rolling upgrade of the cluster nodes.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
When a lock resource is migrated, the dlm compares the migrated
locks with that that was already existing on the new node. If the
comparison fails, it BUGs. This patch prints more messages when the
comparison fails inorder to help with the root cause analyis.
http://oss.oracle.com/bugzilla/show_bug.cgi?id=1206
This does not fix bz1206. However, if we run into it again, we will
have more information to chew on.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
During lock resource migration, o2dlm fills the packet with a LVB from the
first valid lock. For sanity, it ensures that the other valid locks have the
same LVB. If not, it BUGs.
The valid locks are ones that have granted EX or PR lock levels and are either
on the Granted or Converting lists. Locks in the Blocked list cannot have a
valid LVB.
This patch ensures that we skip the locks in the Blocked list.
Fixes oss bugzilla#1202
http://oss.oracle.com/bugzilla/show_bug.cgi?id=1202
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
We used to return positive EAGAIN to indicate a retry action
is needed in dlm_begin_reco_handler(). Now we return negative
-EAGAIN to erase the confusion caused by this error code.
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
* remove asm/atomic.h inclusion from linux/utsname.h --
not needed after kref conversion
* remove linux/utsname.h inclusion from files which do not need it
NOTE: it looks like fs/binfmt_elf.c do not need utsname.h, however
due to some personality stuff it _is_ needed -- cowardly leave ELF-related
headers and files alone.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
in dlmrecovery.c:1121, replace 'migrate' to 'migration' to keep the consistency
by comparing to other lines with the similar log info in the same file.
Signed-off-by: Jeff Liu <jeff.liu@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Knowing the dlm recovery master helps in debugging recovery
issues. This patch prints a message on the recovery master node.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
During migration, the recovery master node may be asked to master a lockres
it may not know about. In that case, it would not only have to create a
lockres and add it to the hash, but also remember to to do the _put_
corresponding to the kref_init in dlm_init_lockres(), as soon as the migration
is completed. Yes, we don't wait for the dlm_purge_lockres() to do that
matching put. Note the ref added for it being in the hash protects the lockres
from being freed prematurely.
This patch adds that missing put, as described above, to plug a memleak.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Normally locks for remote nodes are freed when that node sends an UNLOCK
message to the master. The master node tags an DLM_UNLOCK_FREE_LOCK action
to do an extra put on the lock at the end.
However, there are times when the master node has to free the locks for the
remote nodes forcibly.
Two cases when this happens are:
1. When the master has migrated the lockres plus all locks to another node.
2. When the master is clearing all the locks of a dead node.
It was in the above two conditions that the dlm was missing the extra put.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
__dlm_print_one_lock_resource must be called with spin_lock
the res->spinlock. While in some cases, we use it without this
precondition and lead to the failure of assert_spin_locked.
So call dlm_print_one_lock_resource instead.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Currently the process of dlm join contains 2 steps: query join and assert join.
After query join, the joined node will set its joining_node. So if the joining
node happens to panic before the 2nd step, the joined node will fail to clear
its joining_node flag because that node isn't in the domain map. It at least
cause 2 problems.
1. All the new join request will fail. So no new node can mount the volume.
2. The joined node can't umount the volume since during the umount process it
has to wait for the joining_node to be unknown. So the umount will be hanged.
The solution is to clear the joining_node before we check the domain map.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
With this, a dlm client can take advantage of the group protocol in the dlm
to get full notification whenever a node within the dlm domain leaves
unexpectedly.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
The task_struct->pid member is going to be deprecated, so start
using the helpers (task_pid_nr/task_pid_vnr/task_pid_nr_ns) in
the kernel.
The first thing to start with is the pid, printed to dmesg - in
this case we may safely use task_pid_nr(). Besides, printks produce
more (much more) than a half of all the explicit pid usage.
[akpm@linux-foundation.org: git-drm went and changed lots of stuff]
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Cc: Dave Airlie <airlied@linux.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Replacing memset(<addr>,0,PAGE_SIZE) with clear_page() in
fs/ocfs2/dlm/dlmrecovery.c
Signed-off-by: Shani Moideen <shani.moideen@wipro.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
There is a possibility that dlm_remaster_locks could overwride node->state
with DLM_RECO_NODE_DATA_REQUESTED after dlm_reco_data_done_handler sets the
node->state to DLM_RECO_NODE_DATA_DONE. This could lead to recovery getting
stuck and requires a cluster reboot. Synchronize with dlm_reco_state_lock
spinlock.
Signed-off-by: Srinivas Eeda <srinivas.eeda@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Currently o2net allows one handler function per message type. This
patch adds the ability to call another function to be called after
the handler has returned the message to the other node.
Handlers are now given the option of returning a context (in the form of a
void **) which will be passed back into the post message handler function.
Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
The dlm encodes the node number and a sequence number in the lock cookie.
It also stores the cookie in the lockres in the big endian format to avoid
swapping 8 bytes on each lock request. The bug here was that it was assuming
the cookie to be in the cpu format when decoding it for printing the error
message. This patch swaps the bytes before the print.
Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
The dlm was not waking up threads waiting on the lockres wait queue,
waiting for the lockres to be no longer be in the DLM_LOCK_RES_IN_PROGRESS
and the DLM_LOCK_RES_MIGRATING states.
Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
dlm_dispatch_work was not processing the queued up tasks at
the first sign of the node leaving the domain leading to not
only incompleted tasks but also a mismatch in the dlm refcnt.
Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
The migrate lockres handler was only searching for its lock on
migrated lockres on the expected queue. This could be problematic
as the new master could have also issued a convert request
during the migration and thus moved the lock to the convert queue.
We now search for the lock on all three queues.
Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
Signed-off-by: Sunil Mushran <Sunil.Mushran@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
dlmunlock() was not waiting for migration to complete before releasing locks
on locally mastered locks.
Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
Signed-off-by: Sunil Mushran <Sunil.Mushran@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
This was previously broken and migration of some locks had to be temporarily
disabled. We use a new (and backward-incompatible) set of network messages
to account for all references to a lock resources held across the cluster.
once these are all freed, the master node may then free the lock resource
memory once its local references are dropped.
Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
All kcalloc() calls of the form "kcalloc(1,...)" are converted to the
equivalent kzalloc() calls, and a few kcalloc() calls with the incorrect
ordering of the first two arguments are fixed.
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Adam Belay <ambx1@neo.rr.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: Greg KH <greg@kroah.com>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The OCFS2 DLM uses strlen() to determine lock name length, which excludes
the possibility of putting binary values in the name string. Fix this by
requiring that string length be passed in as a parameter.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
dlm_lockres_master_requery() became global without any external usage.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
locking init cleanups:
- convert " = SPIN_LOCK_UNLOCKED" to spin_lock_init() or DEFINE_SPINLOCK()
- convert rwlocks in a similar manner
this patch was generated automatically.
Motivation:
- cleanliness
- lockdep needs control of lock initialization, which the open-coded
variants do not give
- it's also useful for -rt and for lock debugging in general
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch #if 0's the no longer used dlm_dump_lock_resources().
Since this makes dlmdebug.h empty, this patch also removes this header.
Additionally, the needlessly global dlm_is_node_recovered() is made
static.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
The work that is done can block for long periods of time and so is not
appropriate for keventd.
Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
We cannot restart recovery. Once we begin to recover a node, keep the state
of the recovery intact and follow through, regardless of any other node
deaths that may occur.
Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
