The signed_fw_image member of struct sof_amd_acp_desc is used to enable
signed firmware support in the driver via the acp_sof_quirk_table.
In preparation to support additional use cases of the quirk table (i.e.
adding new flags), move signed_fw_image to a new struct acp_quirk_entry
and update all references to it accordingly.
No functional changes intended.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://msgid.link/r/20240220201623.438944-2-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Luca Ceresoli <luca.ceresoli@bootlin.com>:
This series adds a driver for the internal audio codec of the Rockchip
RK3308 SoC, along with some related patches. This codec is internally
connected to the I2S peripherals on the same chip, and it has some
peculiarities arising from that interconnection.
For proper bidirectional operation with the internal codec at any possible
combination of sampling rates, the I2S peripheral needs two clock sources
(tx and rx), while connection with an external codec commonly needs only
one.
Since v5.16 there is a driver for the I2S in
sound/soc/rockchip/rockchip_i2s_tdm.c, but in some cases it does not
configure correctly the clocks, resulting in an unnecessarily inaccurate
rate. Patch 1 fixes this.
Patches 2-4 add the codec driver along with the bindings and a new helper
macro.
Patches 5-7 add to the SoC DT file two I2S controllers (those which are
internally connected to the internal codec) and the codec itself and enable
the driver in the ARM64 defconfig.
Luca
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
---
Changes in v4:
- several cleanups in the codec probe function
- Link to v3: https://lore.kernel.org/r/20240221-rk3308-audio-codec-v3-0-dfa34abfcef6@bootlin.com
Changes in v3:
- Add the I2S clock fix patch and remove a previous fix which is now superseded
- Codec driver: fix silent playback until a given amplitude of sigital
value, seen at >= 96 kHz rate
- various other changes, listed per-patch
- Link to v2: https://lore.kernel.org/r/20231219-rk3308-audio-codec-v2-0-c70d06021946@bootlin.com
Changes in v2:
- largely rewrote the codec driver to use DAPM and lots of improvements
and cleanups
- removed the RK3308 audio card and related patches
- various other changes, listed per-patch
- Link to v1: https://lore.kernel.org/all/20220907142124.2532620-1-luca.ceresoli@bootlin.com/
---
Luca Ceresoli (7):
ASoC: rockchip: i2s-tdm: Fix inaccurate sampling rates
ASoC: dt-bindings: Add Rockchip RK3308 internal audio codec
ASoC: core: add SOC_DOUBLE_RANGE_TLV() helper macro
ASoC: codecs: Add RK3308 internal audio codec driver
arm64: defconfig: enable Rockchip RK3308 internal audio codec driver
arm64: dts: rockchip: add i2s_8ch_2 and i2s_8ch_3
arm64: dts: rockchip: add the internal audio codec
.../bindings/sound/rockchip,rk3308-codec.yaml | 98 +++
MAINTAINERS | 7 +
arch/arm64/boot/dts/rockchip/rk3308.dtsi | 56 ++
arch/arm64/configs/defconfig | 1 +
include/sound/soc.h | 12 +
sound/soc/codecs/Kconfig | 11 +
sound/soc/codecs/Makefile | 2 +
sound/soc/codecs/rk3308_codec.c | 974 +++++++++++++++++++++
sound/soc/codecs/rk3308_codec.h | 579 ++++++++++++
sound/soc/rockchip/rockchip_i2s_tdm.c | 352 +-------
10 files changed, 1746 insertions(+), 346 deletions(-)
---
base-commit: dfda120c512b3edca1436f770924e91b14f93a98
change-id: 20231219-rk3308-audio-codec-a5558ba8949d
Best regards,
--
Luca Ceresoli <luca.ceresoli@bootlin.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmXuGjEeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGlhYH/3entux62pEL1BSR
3UNZvs41dZ6BW60d5+DQ+v/GnyEwn4Krtf054sfVL3cwGBLbErndo4F2eSHgMnRy
zUTLXl+aAQRpC47phNvXu1bC6jXm+xuXu/8VBYZWP+IP10zFtdSeTC2lQtYwpFd9
u1ZqUtTfKSWjADToLW6asjlviO6MV9rdAYkttJYcQ7Ztn/v+NAECMb0AvFDKHvh4
g74BA3bqslX1fPOMyAH/4u/IL0PRj1usLvbCsTAujb5R9121geYRBylgw0Ei3YXx
P+vaOmJeO33bWiRNdfxEMoQSfJ+q7Jq/x5utZ/SckAy8bFJG7VimQwRrFYtcN6ls
LR0oKRY=
=e2GM
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmXx7wEACgkQJNaLcl1U
h9BYKwf/YYh4JqMRk9bqq+36XjtTluiHvZ45GjDhuEl+dprzAEZTlRxR7JXj8QqU
4G6uywax6qI6Uynlrz78Mk707nkQLjyfJxRblE8NiSwTOHKg5KMh0zmatOPJEHiX
AGKoI7AJjWdtL0+qQmiNTTzEDsJgpL3kivCPXlOl0bdL67H92Do9Hof3e0JeseTy
AT6KMQHt4JxuBh1I/FpeY+WUc77TaM9mlp3itkOUdAxnb90OqItVGRxcs3i2WSH0
sdu5GxpozA5sXBwQh5yz3O9hXzXH0cGCgY5jNylRxzwOdroUTLyZHUItEHAZY4Uj
TpUl6Pjf1m1ieBJxjii3qoC4/iHdrg==
=U9Ja
-----END PGP SIGNATURE-----
ASoC: Merge up release
In order to apply additional fixes that depend on the fixes merged for
v6.8 merge up the final release.
When pcm_runtime is adding platform components it will scan all
registered components. In case of DPCM FE/BE some DAI links will
configure dummy platform. However both dummy codec and dummy platform
are using "snd-soc-dummy" as component->name. Dummy codec should be
skipped when adding platforms otherwise there'll be overflow and UBSAN
complains.
Reported-by: Zhipeng Wang <zhipeng.wang_1@nxp.com>
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Link: https://msgid.link/r/20240305065606.3778642-1-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The sample rates set by the rockchip_i2s_tdm driver in master mode are
inaccurate up to 5% in several cases, due to the driver logic to configure
clocks and a nasty interaction with the Common Clock Framework.
To understand what happens, here is the relevant section of the clock tree
(slightly simplified), along with the names used in the driver:
vpll0 _OR_ vpll1 "mclk_root"
clk_i2s2_8ch_tx_src "mclk_parent"
clk_i2s2_8ch_tx_mux
clk_i2s2_8ch_tx "mclk" or "mclk_tx"
This is what happens when playing back e.g. at 192 kHz using
audio-graph-card (when recording the same applies, only s/tx/rx/):
0. at probe, rockchip_i2s_tdm_set_sysclk() stores the passed frequency in
i2s_tdm->mclk_tx_freq (*) which is 50176000, and that is never modified
afterwards
1. when playback is started, rockchip_i2s_tdm_hw_params() is called and
does the following two calls
2. rockchip_i2s_tdm_calibrate_mclk():
2a. selects mclk_root0 (vpll0) as a parent for mclk_parent
(mclk_tx_src), which is OK because the vpll0 rate is a good for
192000 (and sumbultiple) rates
2b. sets the mclk_root frequency based on ppm calibration computations
2c. sets mclk_tx_src to 49152000 (= 256 * 192000), which is also OK as
it is a multiple of the required bit clock
3. rockchip_i2s_tdm_set_mclk()
3a. calls clk_set_rate() to set the rate of mclk_tx (clk_i2s2_8ch_tx)
to the value of i2s_tdm->mclk_tx_freq (*), i.e. 50176000 which is
not a multiple of the sampling frequency -- this is not OK
3a1. clk_set_rate() reacts by reparenting clk_i2s2_8ch_tx_src to
vpll1 -- this is not OK because the default vpll1 rate can be
divided to get 44.1 kHz and related rates, not 192 kHz
The result is that the driver does a lot of ad-hoc decisions about clocks
and ends up in using the wrong parent at an unoptimal rate.
Step 0 is one part of the problem: unless the card driver calls set_sysclk
at each stream start, whatever rate is set in mclk_tx_freq during boot will
be taken and used until reboot. Moreover the driver does not care if its
value is not a multiple of any audio frequency.
Another part of the problem is that the whole reparenting and clock rate
setting logic is conflicting with the CCF algorithms to achieve largely the
same goal: selecting the best parent and setting the closest clock
rate. And it turns out that only calling once clk_set_rate() on
clk_i2s2_8ch_tx picks the correct vpll and sets the correct rate.
The fix is based on removing the custom logic in the driver to select the
parent and set the various clocks, and just let the Clock Framework do it
all. As a side effect, the set_sysclk() op becomes useless because we now
let the CCF compute the appropriate value for the sampling rate. It also
implies that the whole calibration logic is now dead code and so it is
removed along with the "PCM Clock Compensation in PPM" kcontrol, which has
always been broken anyway. The handling of the 4 optional clocks also
becomes dead code and is removed.
The actual rates have been tested playing 30 seconds of audio at various
sampling rates before and after this change using sox:
time play -r <sample_rate> -n synth 30 sine 950 gain -3
The time reported in the table below is the 'real' value reported by the
'time' command in the above command line.
rate before after
--------- ------ ------
8000 Hz 30.60s 30.63s
11025 Hz 30.45s 30.51s
16000 Hz 30.47s 30.50s
22050 Hz 30.78s 30.41s
32000 Hz 31.02s 30.43s
44100 Hz 30.78s 30.41s
48000 Hz 29.81s 30.45s
88200 Hz 30.78s 30.41s
96000 Hz 29.79s 30.42s
176400 Hz 27.40s 30.41s
192000 Hz 29.79s 30.42s
While the tests are running the clock tree confirms that:
* without the patch, vpll1 is always used and clk_i2s2_8ch_tx always
produces 50176000 Hz, which cannot be divided for most audio rates
except the slowest ones, generating inaccurate rates
* with the patch:
- for 192000 Hz vpll0 is used
- for 176400 Hz vpll1 is used
- clk_i2s2_8ch_tx always produces (256 * <rate>) Hz
Tested on the RK3308 using the internal audio codec.
Fixes: 081068fd64 ("ASoC: rockchip: add support for i2s-tdm controller")
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://msgid.link/r/20240305-rk3308-audio-codec-v4-1-312acdbe628f@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
'gpio-ranges' is a phandle-array which is really a matrix. The schema in
cirrus,cs42l43 is incomplete as it doesn't define there's only a single
entry. Add the outer array constraints that there is a single entry.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://msgid.link/r/20240311222554.1940567-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Using __exit for the remove function results in the remove callback
being discarded with SND_SOC_TLV320ADC3XXX=y. When such a device gets
unbound (e.g. using sysfs or hotplug), the driver is just removed
without the cleanup being performed. This results in resource leaks. Fix
it by compiling in the remove callback unconditionally.
This also fixes a W=1 modpost warning:
WARNING: modpost: sound/soc/codecs/snd-soc-tlv320adc3xxx: section mismatch in reference: adc3xxx_i2c_driver+0x10 (section: .data) -> adc3xxx_i2c_remove (section: .exit.text)
(which only happens with SND_SOC_TLV320ADC3XXX=m).
Fixes: e9a3b57efd ("ASoC: codec: tlv320adc3xxx: New codec driver")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://msgid.link/r/20240310143852.397212-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
- Do not allow large strings (> 4096) as single write to trace_marker
The size of a string written into trace_marker was determined by
the size of the sub-buffer in the ring buffer. That size is
dependent on the PAGE_SIZE of the architecture as it can be mapped
into user space. But on PowerPC, where PAGE_SIZE is 64K, that made
the limit of the string of writing into trace_marker 64K.
One of the selftests looks at the size of the ring buffer sub-buffers
and writes that plus more into the trace_marker. The write will take
what it can and report back what it consumed so that the user space
application (like echo) will write the rest of the string. The string
is stored in the ring buffer and can be read via the "trace" or
"trace_pipe" files.
The reading of the ring buffer uses vsnprintf(), which uses a precision
"%.*s" to make sure it only reads what is stored in the buffer, as
a bug could cause the string to be non terminated.
With the combination of the precision change and the PAGE_SIZE of 64K
allowing huge strings to be added into the ring buffer, plus the test
that would actually stress that limit, a bug was reported that
the precision used was too big for "%.*s" as the string was close to
64K in size and the max precision of vsnprintf is 32K.
Linus suggested not to have that precision as it could hide a bug
if the string was again stored without a nul byte.
Another issue that was brought up is that the trace_seq buffer is
also based on PAGE_SIZE even though it is not tied to the architecture
limit like the ring buffer sub-buffer is. Having it be 64K * 2 is
simply just too big and wasting memory on systems with 64K page sizes.
It is now hardcoded to 8K which is what all other architectures with
4K PAGE_SIZE has.
Finally, the write to trace_marker is now limited to 4K as there is no
reason to write larger strings into trace_marker.
- ring_buffer_wait() should not loop.
The ring_buffer_wait() does not have the full context (yet) on if it
should loop or not. Just exit the loop as soon as its woken up and
let the callers decide to loop or not (they already do, so it's a bit
redundant).
- Fix shortest_full field to be the smallest amount in the ring buffer that
a waiter is waiting for. The "shortest_full" field is updated when a new
waiter comes in and wants to wait for a smaller amount of data in the
ring buffer than other waiters. But after all waiters are woken up, it's
not reset, so if another waiter comes in wanting to wait for more data,
it will be woken up when the ring buffer has a smaller amount from what
the previous waiters were waiting for.
- The wake up all waiters on close is incorrectly called frome .release()
and not from .flush() so it will never wake up any waiters as the
.release() will not get called until all .read() calls are finished. And the
wakeup is for the waiters in those .read() calls.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZe3j6xQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qmYOAQD6rPZ+ILqHmRQMZjsxaasBeVYidspY
wj3fRGzwfiB6fgEAkIeA7FOrkOK0CuG8R+2AtQNF5ZjXdmfZdiYQD1/EjQU=
=Hqlf
-----END PGP SIGNATURE-----
Merge tag 'trace-ring-buffer-v6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Do not allow large strings (> 4096) as single write to trace_marker
The size of a string written into trace_marker was determined by the
size of the sub-buffer in the ring buffer. That size is dependent on
the PAGE_SIZE of the architecture as it can be mapped into user
space. But on PowerPC, where PAGE_SIZE is 64K, that made the limit of
the string of writing into trace_marker 64K.
One of the selftests looks at the size of the ring buffer sub-buffers
and writes that plus more into the trace_marker. The write will take
what it can and report back what it consumed so that the user space
application (like echo) will write the rest of the string. The string
is stored in the ring buffer and can be read via the "trace" or
"trace_pipe" files.
The reading of the ring buffer uses vsnprintf(), which uses a
precision "%.*s" to make sure it only reads what is stored in the
buffer, as a bug could cause the string to be non terminated.
With the combination of the precision change and the PAGE_SIZE of 64K
allowing huge strings to be added into the ring buffer, plus the test
that would actually stress that limit, a bug was reported that the
precision used was too big for "%.*s" as the string was close to 64K
in size and the max precision of vsnprintf is 32K.
Linus suggested not to have that precision as it could hide a bug if
the string was again stored without a nul byte.
Another issue that was brought up is that the trace_seq buffer is
also based on PAGE_SIZE even though it is not tied to the
architecture limit like the ring buffer sub-buffer is. Having it be
64K * 2 is simply just too big and wasting memory on systems with 64K
page sizes. It is now hardcoded to 8K which is what all other
architectures with 4K PAGE_SIZE has.
Finally, the write to trace_marker is now limited to 4K as there is
no reason to write larger strings into trace_marker.
- ring_buffer_wait() should not loop.
The ring_buffer_wait() does not have the full context (yet) on if it
should loop or not. Just exit the loop as soon as its woken up and
let the callers decide to loop or not (they already do, so it's a bit
redundant).
- Fix shortest_full field to be the smallest amount in the ring buffer
that a waiter is waiting for. The "shortest_full" field is updated
when a new waiter comes in and wants to wait for a smaller amount of
data in the ring buffer than other waiters. But after all waiters are
woken up, it's not reset, so if another waiter comes in wanting to
wait for more data, it will be woken up when the ring buffer has a
smaller amount from what the previous waiters were waiting for.
- The wake up all waiters on close is incorrectly called frome
.release() and not from .flush() so it will never wake up any waiters
as the .release() will not get called until all .read() calls are
finished. And the wakeup is for the waiters in those .read() calls.
* tag 'trace-ring-buffer-v6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Use .flush() call to wake up readers
ring-buffer: Fix resetting of shortest_full
ring-buffer: Fix waking up ring buffer readers
tracing: Limit trace_marker writes to just 4K
tracing: Limit trace_seq size to just 8K and not depend on architecture PAGE_SIZE
tracing: Remove precision vsnprintf() check from print event
- fixes for Qualcomm qmp-combo driver for ordering of drm and type-c
switch registartion due to drivers might not probe defer
after having registered child devices to avoid triggering a probe
deferral loop. This fixes internal display on Lenovo ThinkPad X13s
-----BEGIN PGP SIGNATURE-----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=k3pB
-----END PGP SIGNATURE-----
Merge tag 'phy-fixes3-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy fixes from Vinod Koul:
- fixes for Qualcomm qmp-combo driver for ordering of drm and type-c
switch registartion due to drivers might not probe defer after having
registered child devices to avoid triggering a probe deferral loop.
This fixes internal display on Lenovo ThinkPad X13s
* tag 'phy-fixes3-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: qcom-qmp-combo: fix type-c switch registration
phy: qcom-qmp-combo: fix drm bridge registration
The .release() function does not get called until all readers of a file
descriptor are finished.
If a thread is blocked on reading a file descriptor in ring_buffer_wait(),
and another thread closes the file descriptor, it will not wake up the
other thread as ring_buffer_wake_waiters() is called by .release(), and
that will not get called until the .read() is finished.
The issue originally showed up in trace-cmd, but the readers are actually
other processes with their own file descriptors. So calling close() would wake
up the other tasks because they are blocked on another descriptor then the
one that was closed(). But there's other wake ups that solve that issue.
When a thread is blocked on a read, it can still hang even when another
thread closed its descriptor.
This is what the .flush() callback is for. Have the .flush() wake up the
readers.
Link: https://lore.kernel.org/linux-trace-kernel/20240308202432.107909457@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linke li <lilinke99@qq.com>
Cc: Rabin Vincent <rabin@rab.in>
Fixes: f3ddb74ad0 ("tracing: Wake up ring buffer waiters on closing of the file")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The "shortest_full" variable is used to keep track of the waiter that is
waiting for the smallest amount on the ring buffer before being woken up.
When a tasks waits on the ring buffer, it passes in a "full" value that is
a percentage. 0 means wake up on any data. 1-100 means wake up from 1% to
100% full buffer.
As all waiters are on the same wait queue, the wake up happens for the
waiter with the smallest percentage.
The problem is that the smallest_full on the cpu_buffer that stores the
smallest amount doesn't get reset when all the waiters are woken up. It
does get reset when the ring buffer is reset (echo > /sys/kernel/tracing/trace).
This means that tasks may be woken up more often then when they want to
be. Instead, have the shortest_full field get reset just before waking up
all the tasks. If the tasks wait again, they will update the shortest_full
before sleeping.
Also add locking around setting of shortest_full in the poll logic, and
change "work" to "rbwork" to match the variable name for rb_irq_work
structures that are used in other places.
Link: https://lore.kernel.org/linux-trace-kernel/20240308202431.948914369@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linke li <lilinke99@qq.com>
Cc: Rabin Vincent <rabin@rab.in>
Fixes: 2c2b0a78b3 ("ring-buffer: Add percentage of ring buffer full to wake up reader")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
- Make KVM_MEM_GUEST_MEMFD mutually exclusive with KVM_MEM_READONLY to
avoid creating an inconsistent ABI (KVM_MEM_GUEST_MEMFD is not writable
from userspace, so there would be no way to write to a read-only
guest_memfd).
- Update documentation for KVM_SW_PROTECTED_VM to make it abundantly
clear that such VMs are purely for development and testing.
- Limit KVM_SW_PROTECTED_VM guests to the TDP MMU, as the long term plan
is to support confidential VMs with deterministic private memory (SNP
and TDX) only in the TDP MMU.
- Fix a bug in a GUEST_MEMFD dirty logging test that caused false passes.
x86 fixes:
- Fix missing marking of a guest page as dirty when emulating an atomic access.
- Check for mmu_notifier invalidation events before faulting in the pfn,
and before acquiring mmu_lock, to avoid unnecessary work and lock
contention with preemptible kernels (including CONFIG_PREEMPT_DYNAMIC
in non-preemptible mode).
- Disable AMD DebugSwap by default, it breaks VMSA signing and will be
re-enabled with a better VM creation API in 6.10.
- Do the cache flush of converted pages in svm_register_enc_region() before
dropping kvm->lock, to avoid a race with unregistering of the same region
and the consequent use-after-free issue.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmXskdYUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroN1TAf/SUGf4QuYG7nnfgWDR+goFO6Gx7NE
pJr3kAwv6d2f+qTlURfGjnX929pgZDLgoTkXTNeZquN6LjgownxMjBIpymVobvAD
AKvqJS/ECpryuehXbeqlxJxJn+TrxJ5r4QeNILMHc3AOZoiUqM6xl3zFfXWDNWVo
IazwT8P3d8wxiHAxv1eG6OVWHxbcg31068FVKRX3f/bWPbVwROJrPkCopmz2BJvU
6KYdYcn2rkpDTEM3ouDC/6gxJ9vpSY3+nW7Q7dNtGtOH2+BddfSA6I0rphCQWCNs
uXOxd5bDrC+KmkiULTPostuvwBgIm1k9wC2kW9A4P2VEf6Ay+ZHEdAOBJQ==
=+MT/
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"KVM GUEST_MEMFD fixes for 6.8:
- Make KVM_MEM_GUEST_MEMFD mutually exclusive with KVM_MEM_READONLY
to avoid creating an inconsistent ABI (KVM_MEM_GUEST_MEMFD is not
writable from userspace, so there would be no way to write to a
read-only guest_memfd).
- Update documentation for KVM_SW_PROTECTED_VM to make it abundantly
clear that such VMs are purely for development and testing.
- Limit KVM_SW_PROTECTED_VM guests to the TDP MMU, as the long term
plan is to support confidential VMs with deterministic private
memory (SNP and TDX) only in the TDP MMU.
- Fix a bug in a GUEST_MEMFD dirty logging test that caused false
passes.
x86 fixes:
- Fix missing marking of a guest page as dirty when emulating an
atomic access.
- Check for mmu_notifier invalidation events before faulting in the
pfn, and before acquiring mmu_lock, to avoid unnecessary work and
lock contention with preemptible kernels (including
CONFIG_PREEMPT_DYNAMIC in non-preemptible mode).
- Disable AMD DebugSwap by default, it breaks VMSA signing and will
be re-enabled with a better VM creation API in 6.10.
- Do the cache flush of converted pages in svm_register_enc_region()
before dropping kvm->lock, to avoid a race with unregistering of
the same region and the consequent use-after-free issue"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
SEV: disable SEV-ES DebugSwap by default
KVM: x86/mmu: Retry fault before acquiring mmu_lock if mapping is changing
KVM: SVM: Flush pages under kvm->lock to fix UAF in svm_register_enc_region()
KVM: selftests: Add a testcase to verify GUEST_MEMFD and READONLY are exclusive
KVM: selftests: Create GUEST_MEMFD for relevant invalid flags testcases
KVM: x86/mmu: Restrict KVM_SW_PROTECTED_VM to the TDP MMU
KVM: x86: Update KVM_SW_PROTECTED_VM docs to make it clear they're a WIP
KVM: Make KVM_MEM_GUEST_MEMFD mutually exclusive with KVM_MEM_READONLY
KVM: x86: Mark target gfn of emulated atomic instruction as dirty
A task can wait on a ring buffer for when it fills up to a specific
watermark. The writer will check the minimum watermark that waiters are
waiting for and if the ring buffer is past that, it will wake up all the
waiters.
The waiters are in a wait loop, and will first check if a signal is
pending and then check if the ring buffer is at the desired level where it
should break out of the loop.
If a file that uses a ring buffer closes, and there's threads waiting on
the ring buffer, it needs to wake up those threads. To do this, a
"wait_index" was used.
Before entering the wait loop, the waiter will read the wait_index. On
wakeup, it will check if the wait_index is different than when it entered
the loop, and will exit the loop if it is. The waker will only need to
update the wait_index before waking up the waiters.
This had a couple of bugs. One trivial one and one broken by design.
The trivial bug was that the waiter checked the wait_index after the
schedule() call. It had to be checked between the prepare_to_wait() and
the schedule() which it was not.
The main bug is that the first check to set the default wait_index will
always be outside the prepare_to_wait() and the schedule(). That's because
the ring_buffer_wait() doesn't have enough context to know if it should
break out of the loop.
The loop itself is not needed, because all the callers to the
ring_buffer_wait() also has their own loop, as the callers have a better
sense of what the context is to decide whether to break out of the loop
or not.
Just have the ring_buffer_wait() block once, and if it gets woken up, exit
the function and let the callers decide what to do next.
Link: https://lore.kernel.org/all/CAHk-=whs5MdtNjzFkTyaUy=vHi=qwWgPi0JgTe6OYUYMNSRZfg@mail.gmail.com/
Link: https://lore.kernel.org/linux-trace-kernel/20240308202431.792933613@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linke li <lilinke99@qq.com>
Cc: Rabin Vincent <rabin@rab.in>
Fixes: e30f53aad2 ("tracing: Do not busy wait in buffer splice")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
discovered while working on some other features. Essentially,
there is a reordering when adding optional slaves and proper
cleanup upon registering a mux device.
Christophe fixes the exit path in the wmt driver that was leaving
the clocks hanging, and the last fix from Tommy avoids false
error reports in IRQ.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEOZGx6rniZ1Gk92RdFA3kzBSgKbYFAmXsmS0ACgkQFA3kzBSg
Kbb0JBAAog+Ih7J/V0CB915BLvAtO08vUnn9bzsEIunWSp/lY+FhGhrJ2fX0gW3/
3UnFoH3zs5T6z8gxpc8QdkJ81v5pqjvkap4gKfT25suT5FUpcu9La65jMI+dITR1
vmYbVZlpNqyXuRQG/RVEPJV6vttjkbt7YPcCYx0lhlcYsENt7+NoW5fEHj4gVqST
TP4q2UaTsSbItDaU36cdGDNx/makL8TZgkoAunQ+vIPNUT6ssdeCf1+DwAIrbtjo
I7LwtMnraHf53rw3+HVJLabV2YhRNpt6NlPPwFS5s/pFfPdSIJSzsplviNJ4sWMU
/K9XBPwBjk8GTE2loe2dDwaZsMo2U+MMA8x3t8T2WND9Q8jcz0BLj1sNRT2yB49g
KhBoUI7moSViYp/6xibiO7879/w5rm3rOBfv5nJDSbp/Hm5J9wW4ioDPy1eSLmsG
Tnj+wJHQ+BY/s/9jz2sSasFFJi2UTufusWbluc00C1iBkeDbY2Gas/ZTu85ql3PC
hI4AWLOt9OYhQ2pqI/cF+MV+BwtXHs62AkS3o16VBZcwJuCxZarecIcMCBcuhCxh
FNv/fSR39OJOlwe+wiX6M0XuR1GxfnEdgCndD2wDggRNyVBfFlhh1h/CeWsnpmsW
9lNnfVPFHZ39RTp9HazZB5QPssXkkg9cEelXKZE4z4XOwG+OolQ=
=8AoZ
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Two patches from Heiner for the i801 are targeting muxes discovered
while working on some other features. Essentially, there is a
reordering when adding optional slaves and proper cleanup upon
registering a mux device.
Christophe fixes the exit path in the wmt driver that was leaving the
clocks hanging, and the last fix from Tommy avoids false error reports
in IRQ"
* tag 'i2c-for-6.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: aspeed: Fix the dummy irq expected print
i2c: wmt: Fix an error handling path in wmt_i2c_probe()
i2c: i801: Avoid potential double call to gpiod_remove_lookup_table
i2c: i801: Fix using mux_pdev before it's set
A fix to suppress warning about unreleased IRQ for 1394 OHCI hardware when
disabling MSI
In Linux kernel v6.5, a PCI driver for 1394 OHCI hardware was optimized
into the managed device resources. Edmund Raile points out that the change
brings the warning about unreleased IRQ at the call of pci_disable_msi(),
since the API expects that the relevant IRQ has already been released in
advance.
As long as the API is called in .remove callback of PCI device operation,
it is prohibited to maintain the IRQ as the part of managed device
resource. As a workaround, the IRQ is explicitly released at .remove
callback, before the call of pci_disable_msi().
The pci_disable_msi() is legacy API nowadays in PCI MSI implementation. I
have a plan to replace it with the modern API in the development for the
future version of Linux kernel. So at present I keep them as is.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQE66IEYNDXNBPeGKSsLtaWM8LwEwUCZevaBAAKCRCsLtaWM8Lw
Ez5LAP9QEraiOsm2JxyCNMmyjWubMd58wSjdVmWW61yKxEegvwD8DPY1eosKXhDA
GLWaiRbJ4YbIglEK6zDnmwAz5FYtPw8=
=PVzs
-----END PGP SIGNATURE-----
Merge tag 'firewire-fixes-6.8-final' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fix from Takashi Sakamoto:
"A fix to suppress a warning about unreleased IRQ for 1394 OHCI
hardware when disabling MSI.
In Linux kernel v6.5, a PCI driver for 1394 OHCI hardware was
optimized into the managed device resources. Edmund Raile points out
that the change brings the warning about unreleased IRQ at the call of
pci_disable_msi(), since the API expects that the relevant IRQ has
already been released in advance.
As long as the API is called in .remove callback of PCI device
operation, it is prohibited to maintain the IRQ as the part of managed
device resource. As a workaround, the IRQ is explicitly released at
.remove callback, before the call of pci_disable_msi().
pci_disable_msi() is legacy API nowadays in PCI MSI implementation. I
have a plan to replace it with the modern API in the development for
the future version of Linux kernel. So at present I keep them as is"
* tag 'firewire-fixes-6.8-final' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: ohci: prevent leak of left-over IRQ on unbind
The DebugSwap feature of SEV-ES provides a way for confidential guests to use
data breakpoints. However, because the status of the DebugSwap feature is
recorded in the VMSA, enabling it by default invalidates the attestation
signatures. In 6.10 we will introduce a new API to create SEV VMs that
will allow enabling DebugSwap based on what the user tells KVM to do.
Contextually, we will change the legacy KVM_SEV_ES_INIT API to never
enable DebugSwap.
For compatibility with kernels that pre-date the introduction of DebugSwap,
as well as with those where KVM_SEV_ES_INIT will never enable it, do not enable
the feature by default. If anybody wants to use it, for now they can enable
the sev_es_debug_swap_enabled module parameter, but this will result in a
warning.
Fixes: d1f85fbe83 ("KVM: SEV: Enable data breakpoints in SEV-ES")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM GUEST_MEMFD fixes for 6.8:
- Make KVM_MEM_GUEST_MEMFD mutually exclusive with KVM_MEM_READONLY to
avoid creating ABI that KVM can't sanely support.
- Update documentation for KVM_SW_PROTECTED_VM to make it abundantly
clear that such VMs are purely a development and testing vehicle, and
come with zero guarantees.
- Limit KVM_SW_PROTECTED_VM guests to the TDP MMU, as the long term plan
is to support confidential VMs with deterministic private memory (SNP
and TDX) only in the TDP MMU.
- Fix a bug in a GUEST_MEMFD negative test that resulted in false passes
when verifying that KVM_MEM_GUEST_MEMFD memslots can't be dirty logged.
KVM x86 fixes for 6.8, round 2:
- When emulating an atomic access, mark the gfn as dirty in the memslot
to fix a bug where KVM could fail to mark the slot as dirty during live
migration, ultimately resulting in guest data corruption due to a dirty
page not being re-copied from the source to the target.
- Check for mmu_notifier invalidation events before faulting in the pfn,
and before acquiring mmu_lock, to avoid unnecessary work and lock
contention. Contending mmu_lock is especially problematic on preemptible
kernels, as KVM may yield mmu_lock in response to the contention, which
severely degrades overall performance due to vCPUs making it difficult
for the task that triggered invalidation to make forward progress.
Note, due to another kernel bug, this fix isn't limited to preemtible
kernels, as any kernel built with CONFIG_PREEMPT_DYNAMIC=y will yield
contended rwlocks and spinlocks.
https://lore.kernel.org/all/20240110214723.695930-1-seanjc@google.com
missed and is corrected here.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAmXrlqwTHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi4epB/wILSnZBbhFevm81CVndx48FS0e3b6+
3coFf26FbzfTR7HnK+0BHrNfAak6Esbgq0QuPiQyu7uDrgVBEvAcnQdYu7j+QCl8
AcDbpBmPlq1tuaRab3/hxOW5G62oEq5uFajPuSJ23K3NXDu+NLZLcpmcUBUxpN+N
rN4GNEFXqHIaMXVF1DpHXmtNY/NGqS66e/MqK4L9IQKjfcBfYSrmyWTNfFtcDT1x
GxXtieS/4d/kbQqBCUTdk0ER3175fZWvFf/R/h89Npch3hMicc9BGILwtuJCrRix
VqlGhegMub+7IB5sUr0WhSnXCZ77/kGtvNg5jTFcoPi5xsYMRZrXCVM9
=3YdE
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-6.8-rc8' of https://github.com/ceph/ceph-client
Pull ceph fix from Ilya Dryomov:
"A follow-up for sparse read fixes that went into -rc4 -- msgr2 case
was missed and is corrected here"
* tag 'ceph-for-6.8-rc8' of https://github.com/ceph/ceph-client:
libceph: init the cursor when preparing sparse read in msgr2
Here are a few small char/misc and other driver subsystem fixes for
reported issues that have been in my tree for inclusion in 6.8-rc8 or
-final, which ever is next.
Included in here are fixes for:
- iio driver fixes for reported problems
- much reported bugfix for a lis3lv02d_i2c regression
- comedi driver bugfix
- mei new device ids
- mei driver fixes
- counter core fix
All of these have been in linux-next with no reported issues, some for
many weeks.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZetI4A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylm6wCfT0KKJhCWFtUrEmvgu3NWjdRVHmMAnj01w5j0
t2aTmnRJd+TeA/yTTDSz
=Wsg2
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are a few small char/misc and other driver subsystem fixes for
reported issues that have been in my tree.
Included in here are fixes for:
- iio driver fixes for reported problems
- much reported bugfix for a lis3lv02d_i2c regression
- comedi driver bugfix
- mei new device ids
- mei driver fixes
- counter core fix
All of these have been in linux-next with no reported issues, some for
many weeks"
* tag 'char-misc-6.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
mei: gsc_proxy: match component when GSC is on different bus
misc: fastrpc: Pass proper arguments to scm call
comedi: comedi_test: Prevent timers rescheduling during deletion
comedi: comedi_8255: Correct error in subdevice initialization
misc: lis3lv02d_i2c: Fix regulators getting en-/dis-abled twice on suspend/resume
iio: accel: adxl367: fix I2C FIFO data register
iio: accel: adxl367: fix DEVID read after reset
iio: pressure: dlhl60d: Initialize empty DLH bytes
iio: imu: inv_mpu6050: fix frequency setting when chip is off
iio: pressure: Fixes BMP38x and BMP390 SPI support
iio: imu: inv_mpu6050: fix FIFO parsing when empty
mei: Add Meteor Lake support for IVSC device
mei: me: add arrow lake point H DID
mei: me: add arrow lake point S DID
counter: fix privdata alignment
Here are some small remaining tty/serial driver fixes for 6.8-rc8.
Included in here is fixes for:
- vt unicode buffer corruption fix
- imx serial driver fixes, again
- port suspend fix
- 8250_dw driver fix
- fsl_lpuart driver fix
- revert for the qcom_geni_serial driver to fix a reported regression
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZetKOg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylrgACg1Ro50Xu8pgExHSDbTwoPPybjJrcAoJtpv3/f
EN3V+fWc4o0+RVT9JNnM
=iG2L
-----END PGP SIGNATURE-----
Merge tag 'tty-6.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial fixes from Greg KH:
"Here are some small remaining tty/serial driver fixes. Included in
here is fixes for:
- vt unicode buffer corruption fix
- imx serial driver fixes, again
- port suspend fix
- 8250_dw driver fix
- fsl_lpuart driver fix
- revert for the qcom_geni_serial driver to fix a reported regression
All of these have been in linux-next with no reported issues"
* tag 'tty-6.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
Revert "tty: serial: simplify qcom_geni_serial_send_chunk_fifo()"
tty: serial: fsl_lpuart: avoid idle preamble pending if CTS is enabled
vt: fix unicode buffer corruption when deleting characters
serial: port: Don't suspend if the port is still busy
serial: 8250_dw: Do not reclock if already at correct rate
tty: serial: imx: Fix broken RS485
Here are some small remaining fixes for USB and Thunderbolt drivers for
6.8-rc8. Included in here are fixes for:
- thunderbold NULL dereference fix
- typec driver fixes
- xhci driver regression fix
- usb-storage divide-by-0 fix
- ncm gadget driver fix
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZetK3w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymyJwCcDNocBL9ksLyDV3m+VSnzhSUEyQ8AnjJabEAG
8WVMcb6ODE8yMjEuc7zB
=aQ7i
-----END PGP SIGNATURE-----
Merge tag 'usb-6.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt fixes from Greg KH:
"Here are some small remaining fixes for USB and Thunderbolt drivers.
Included in here are fixes for:
- thunderbold NULL dereference fix
- typec driver fixes
- xhci driver regression fix
- usb-storage divide-by-0 fix
- ncm gadget driver fix
All of these have been in linux-next with no reported issues"
* tag 'usb-6.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
xhci: Fix failure to detect ring expansion need.
usb: port: Don't try to peer unused USB ports based on location
usb: gadget: ncm: Fix handling of zero block length packets
usb: typec: altmodes/displayport: create sysfs nodes as driver's default device attribute group
usb: typec: tpcm: Fix PORT_RESET behavior for self powered devices
usb: typec: ucsi: fix UCSI on SM8550 & SM8650 Qualcomm devices
USB: usb-storage: Prevent divide-by-0 error in isd200_ata_command
thunderbolt: Fix NULL pointer dereference in tb_port_update_credits()
- Fix the PM suspend callback in the STM32 ST32MP257 driver to
properly support suspend.
- Drop an extraneous reference put in the debugfs code, this was
confusing the reference counts and causing unsolicited calls
to __free().
-----BEGIN PGP SIGNATURE-----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=8n6+
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Fix the PM suspend callback in the STM32 ST32MP257 driver to properly
support suspend
- Drop an extraneous reference put in the debugfs code, this was
confusing the reference counts and causing unsolicited calls to
__free()
* tag 'pinctrl-v6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: don't put the reference to GPIO device in pinctrl_pins_show()
pinctrl: stm32: fix PM support for stm32mp257
- a revert of endpoint checks in bcm5974 - the driver is being naughty
and pokes at unclaimed USB interface, so the check fails. We need to
fix the driver to claim both interfaces, and then re-implement the
endpoints check
- a fix to Synaptics RMI driver to avoid UAF on driver unload or device
unbinding
- a few new VID/PIDs added to xpad game controller driver
- a change to gpio_keys_polled driver to quiet it when GPIO causes probe
deferral.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCZeqhHAAKCRBAj56VGEWX
nNV/AQDOrCWfqrL932EV6/K45siU+sUeTVd2iRIlS3jg52DohgEA53uWXmmU0kvH
Hkr6d/cng8X+BfOrO3N7y99Zhc0nlgs=
=QQR8
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- a revert of endpoint checks in bcm5974 - the driver is being naughty
and pokes at unclaimed USB interface, so the check fails. We need to
fix the driver to claim both interfaces, and then re-implement the
endpoints check
- a fix to Synaptics RMI driver to avoid UAF on driver unload or device
unbinding
- a few new VID/PIDs added to xpad game controller driver
- a change to gpio_keys_polled driver to quiet it when GPIO causes
probe deferral.
* tag 'input-for-v6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: synaptics-rmi4 - fix UAF of IRQ domain on driver removal
Input: gpio_keys_polled - suppress deferred probe error for gpio
Revert "Input: bcm5974 - check endpoint type before starting traffic"
Input: xpad - add additional HyperX Controller Identifiers
A collection of small fixes. A half of them are HD-audio quirks while
the rest are various device-specific ASoC fixes.
-----BEGIN PGP SIGNATURE-----
iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAmXqx+YOHHRpd2FpQHN1
c2UuZGUACgkQLtJE4w1nLE8zIw//cuFpJBmqj/Qkk40BBkPTVIGF42K5IE+zYuxr
kO4z4Rq6uI/s1T9pgCGU0c8rLsBfkeW9k6M6fglDusLD4zl7A4NjEOVCl3/rpAwg
rQoglgEfBue1PZ/3yVGI1PxBaCGOdoKxyBDNy3dwAzZBe+PJ3cbAsvflAsAK/XqD
vjV9SMMgxIfOqWJTAYXKTnk2VSoyFdKulK5n9Eb3941Bj43YOpo0TPmD0YXfmf1b
sCvDzGkfUdDM3hkDLlI/uY9T/7vFLYMN9ktF+BEdDmqeVZBwMEnqW7neF3t8uFjn
6OsWCwlU6jHxe3texMEeGwyXDETnK3YSCiYPZQClEuDG6rkOu9XEzsTCuJLK5yQR
Q9iY9/R/3UOCa/ykyISAi0oZtL8HgASo2S8FyBiw8bYV7dGw2oXCx5ieLVntuE0R
ktSUm8/F0esQ8D3EPdQ4H+St5xSWUIz6vX53T7zJGZ5EOr0Bv9W38L7jXHbmxzd0
GodPCNGOSzNgLxg+pDjj0smJEury14ASTyF5wGGd2SF00cHB71QPlORbcBD44X6q
PxFSZ3R56PWVyrsD6IONrP88af9M9zM/tR458pYi+eoRFyYTungFZDvSeWzdGA37
7i/z396TzYQrkXSoTfLef0R0vIt2s816ZUvNluikBWQJnvDxrUvoNFCwV0Qa8bKn
jh7EDfM=
=TMCk
-----END PGP SIGNATURE-----
Merge tag 'sound-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes. Half of them are HD-audio quirks while
the rest are various device-specific ASoC fixes"
* tag 'sound-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: wm8962: Fix up incorrect error message in wm8962_set_fll
ASoC: wm8962: Enable both SPKOUTR_ENA and SPKOUTL_ENA in mono mode
ASoC: wm8962: Enable oscillator if selecting WM8962_FLL_OSC
ASoC: dt-bindings: nvidia: Fix 'lge' vendor prefix
ALSA: hda/realtek: fix mute/micmute LEDs for HP EliteBook
ASoC: amd: yc: Add HP Pavilion Aero Laptop 13-be2xxx(8BD6) into DMI quirk table
ASoC: rcar: adg: correct TIMSEL setting for SSI9
ALSA: hda: cs35l41: Overwrite CS35L41 configuration for ASUS UM5302LA
ALSA: hda/realtek: Add quirks for Lenovo Thinkbook 16P laptops
ALSA: hda: cs35l41: Support Lenovo Thinkbook 16P
ALSA: hda/realtek - Add Headset Mic supported Acer NB platform
ALSA: hda: optimize the probe codec process
ALSA: hda/realtek - Fix headset Mic no show at resume back for Lenovo ALC897 platform
ASoC: Intel: bytcr_rt5640: Add an extra entry for the Chuwi Vi8 tablet
ASoC: madera: Fix typo in madera_set_fll_clks shift value
MAINTAINERS
- update email address
core:
- fix polling in certain configurations
buddy:
- fix kunit test warning
panel:
- boe-tv101wum-nl6: timing tuning fixes
i915:
- Fix to extract HDCP information from primary connector
- Check for NULL mmu_interval_notifier before removing
- Fix for #10184: Kernel crash on UHD Graphics 730 (Cc stable)
- Fix for #10284: Boot delay regresion with PSR
- Fix DP connector DSC HW state readout
- Selftest fix to convert msecs to jiffies
xe:
- error path fix
amdgpu:
- SMU14 fix
- Fix possible NULL pointer
- VRR fix
- pwm fix
nouveau:
- fix deadlock in new ioctls fail path
- fix missing locking around object rbtree
udl:
- apply and revert format change
-----BEGIN PGP SIGNATURE-----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=g/du
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2024-03-08' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Regular fixes (two weeks for i915), scattered across drivers, amdgpu
and i915 being the main ones, with nouveau having a couple of fixes.
One patch got applied for udl, but reverted soon after as the
maintainer has missed some crucial prior discussion.
Seems quiet and normal enough for this stage.
MAINTAINERS
- update email address
core:
- fix polling in certain configurations
buddy:
- fix kunit test warning
panel:
- boe-tv101wum-nl6: timing tuning fixes
i915:
- Fix to extract HDCP information from primary connector
- Check for NULL mmu_interval_notifier before removing
- Fix for #10184: Kernel crash on UHD Graphics 730 (Cc stable)
- Fix for #10284: Boot delay regresion with PSR
- Fix DP connector DSC HW state readout
- Selftest fix to convert msecs to jiffies
xe:
- error path fix
amdgpu:
- SMU14 fix
- Fix possible NULL pointer
- VRR fix
- pwm fix
nouveau:
- fix deadlock in new ioctls fail path
- fix missing locking around object rbtree
udl:
- apply and revert format change"
* tag 'drm-fixes-2024-03-08' of https://gitlab.freedesktop.org/drm/kernel: (21 commits)
nouveau: lock the client object tree.
drm/tests/buddy: fix print format
drm/xe: Return immediately on tile_init failure
drm/amdgpu/pm: Fix the error of pwm1_enable setting
drm/amd/display: handle range offsets in VRR ranges
drm/amd/display: check dc_link before dereferencing
drm/amd/swsmu: modify the gfx activity scaling
Revert "drm/udl: Add ARGB8888 as a format"
drm/i915/panelreplay: Move out psr_init_dpcd() from init_connector()
drm/i915/dp: Fix connector DSC HW state readout
drm/i915/selftests: Fix dependency of some timeouts on HZ
drm/udl: Add ARGB8888 as a format
drm/nouveau: fix stale locked mutex in nouveau_gem_ioctl_pushbuf
drm/i915: Don't explode when the dig port we don't have an AUX CH
MAINTAINERS: Update email address for Tvrtko Ursulin
drm/panel: boe-tv101wum-nl6: Fine tune Himax83102-j02 panel HFP and HBP (again)
drm: Fix output poll work for drm_kms_helper_poll=n
drm/i915: Check before removing mm notifier
drm/i915/hdcp: Extract hdcp structure from correct connector
drm/i915/hdcp: Remove additional timing for reading mst hdcp message
...
When the i2c error condition occurred and master state was not
idle, the master irq function will goto complete state without any
other interrupt handling. It would cause dummy irq expected print.
Under this condition, assign the irq_status into irq_handle.
For example, when the abnormal start / stop occurred (bit 5) with
normal stop status (bit 4) at same time. Then the normal stop status
would not be handled and it would cause irq expected print in
the aspeed_i2c_bus_irq.
...
aspeed-i2c-bus x. i2c-bus: irq handled != irq.
Expected 0x00000030, but was 0x00000020
...
Fixes: 3e9efc3299 ("i2c: aspeed: Handle master/slave combined irq events properly")
Cc: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Signed-off-by: Tommy Huang <tommy_huang@aspeedtech.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
wmt_i2c_reset_hardware() calls clk_prepare_enable(). So, should an error
occur after it, it should be undone by a corresponding
clk_disable_unprepare() call, as already done in the remove function.
Fixes: 560746eb79 ("i2c: vt8500: Add support for I2C bus on Wondermedia SoCs")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
If registering the platform device fails, the lookup table is
removed in the error path. On module removal we would try to
remove the lookup table again. Fix this by setting priv->lookup
only if registering the platform device was successful.
In addition free the memory allocated for the lookup table in
the error path.
Fixes: d308dfbf62 ("i2c: mux/i801: Switch to use descriptor passing")
Cc: stable@vger.kernel.org
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
i801_probe_optional_slaves() is called before i801_add_mux().
This results in mux_pdev being checked before it's set by
i801_add_mux(). Fix this by changing the order of the calls.
I consider this safe as I see no dependencies.
Fixes: 80e56b86b5 ("i2c: i801: Simplify class-based client device instantiation")
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Some more driver specific fixes for v6.8, plus one new x86 platform
quirk. All good fixes to have if you have systems that use the relevant
hardware.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmXqBl8ACgkQJNaLcl1U
h9C4ewf7BjabmEuIq1BdWVHr+e7zQ6fH2azORhfFJ6ckGu3XBJwUw3ntlt34DkE9
PhImkYO+tdce0yQy+YBa4Nn9ZBkFvVpDC1lyPVbV7z/caZ5coSVL/lpcb4/ntvnY
OjTX6zCFolA//BjZdaa5NzBKqQ6goAdV4ZgOh5UoutVcSlJaT08c4vbgbXpouaIG
E4VrBQRzRvMyqbhG/jP3cF48FyXNKEAMcsVPzSNzpbQ2KETV5XoXAw2bqn2n8flv
tN8gWmfSiv2hlJkIR5Nt800tzOJW+7l9obQX49l3+DKpj67sReJtJYEhkLDdY1jp
f3VVWlj43GF54xb/JQ447ehIPKnS6g==
=UzHL
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.8-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.8
Some more driver specific fixes for v6.8, plus one new x86 platform
quirk. All good fixes to have if you have systems that use the relevant
hardware.
panel, a deadlock fix for nouveau, A controversial format fix for udl
that got reverted to allow further discussion, and a build fix for the
drm/buddy kunit tests.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCZel+awAKCRDj7w1vZxhR
xXS0AQDu37APL6isTd1JlhCNfDArtiGXSQrLMsaIkwcJzMHzKgD/T/G1P8BgjM51
VyHajnBH/8LyIyBLv92QRcf25Lu8+Ac=
=k5hs
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2024-03-07' of https://anongit.freedesktop.org/git/drm/drm-misc into drm-fixes
A connector status polling fix, a timings fix for the Himax83102-j02
panel, a deadlock fix for nouveau, A controversial format fix for udl
that got reverted to allow further discussion, and a build fix for the
drm/buddy kunit tests.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240307-quizzical-auburn-starling-0ade8f@houat
issues or aren't considered to be needed in earlier kernel versions.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZepZNgAKCRDdBJ7gKXxA
jpEWAQC8ThQlyArXO8uXHwa8MDYgUKj02CIQE+jZ3pXIdL8w8gD/UGQQod+DBr3l
zK3AljRd4hfrKVJB7H1+Zx/6PlH7Bgg=
=DG4B
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2024-03-07-16-17' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"6 hotfixes. 4 are cc:stable and the remainder pertain to post-6.7
issues or aren't considered to be needed in earlier kernel versions"
* tag 'mm-hotfixes-stable-2024-03-07-16-17' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
scripts/gdb/symbols: fix invalid escape sequence warning
mailmap: fix Kishon's email
init/Kconfig: lower GCC version check for -Warray-bounds
mm, mmap: fix vma_merge() case 7 with vma_ops->close
mm: userfaultfd: fix unexpected change to src_folio when UFFDIO_MOVE fails
mm, vmscan: prevent infinite loop for costly GFP_NOIO | __GFP_RETRY_MAYFAIL allocations
Calling irq_domain_remove() will lead to freeing the IRQ domain
prematurely. The domain is still referenced and will be attempted to get
used via rmi_free_function_list() -> rmi_unregister_function() ->
irq_dispose_mapping() -> irq_get_irq_data()'s ->domain pointer.
With PaX's MEMORY_SANITIZE this will lead to an access fault when
attempting to dereference embedded pointers, as in Torsten's report that
was faulting on the 'domain->ops->unmap' test.
Fix this by releasing the IRQ domain only after all related IRQs have
been deactivated.
Fixes: 24d28e4f12 ("Input: synaptics-rmi4 - convert irq distribution to irq_domain")
Reported-by: Torsten Hilbrich <torsten.hilbrich@secunet.com>
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Link: https://lore.kernel.org/r/20240222142654.856566-1-minipli@grsecurity.net
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
One small fix for the newly added cs42l43 driver which would have caused
it problems working in some system configurations by needlessly
restricting chip select configurations.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmXqBvUACgkQJNaLcl1U
h9DNlgf/WZYbZ6cKFbIdDgykCoV0c4IlUWFSXEGhPpS3GGv4+mIXuDbw2i3bNGKO
QJCGjr/w6FLZj9L5KNRD8U1SSPsKLIEwQRewHWpkTztf4l6gKynedt9Tj1WgskLw
zNyyEf41XzSkg2MkCs1O5a8qjD8BUnukobo2THC1qKO0JP6iznxwvtSbSDm8RnXs
643nim0PD61+BTvV0TFxZp0Aj2cXaB7VIifQp7uvbayI3v+05RTIWASXDEz1x6GI
+efDd/O4tAJNAyFsOHhfDBxE9ZZXD4qlPZpod2Te7gmpT0UBu3dHab5EiTiGHOqR
YKH5NRglssO46UEhTgLD367K0GsNwg==
=oAxA
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fix from Mark Brown:
"One small fix for the newly added cs42l43 driver which would have
caused it problems working in some system configurations by needlessly
restricting chip select configurations"
* tag 'spi-fix-v6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: cs42l43: Don't limit native CS to the first chip select
A couple of small fixes for the rk808 driver, the regulator voltage
configurations were incorrectly described. The changes are not expected
to have practical impact but given that we're dealing with power it's
generally better to follow the hardware specification as closely as we
can to avoid unexpected stresses.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmXqCEAACgkQJNaLcl1U
h9Czzwf9Hq0MKvM16k53JYLFtopj9/PAjJG9JwXhYgsxSZ5oaD4HCBUEU8ZYmrgg
ySVyrZ42ptV17VYGwDygzvYDY1GGc04bIL4TYABgCp+1sd9TJSw0Ote0tap2OHVO
zY80H5h8UNgCX1dC5J0uBfADCnVaACDdrPSxREuBm0YoZ/fLBpl8Gmr04vfleQGf
b5c8uZs9q335c1JagvRCQvVxLvnKTR3RUog8mMhK3gHpITw8GWn23Mc7xalFS9TT
uXM4Shu1fvf610IsZ8DXBFCPDgEdvObEsVE1XLoRCSM++V090KLaVAqR+u8i1pOH
hd0Oa8tCVQ+vR/Se7l17Cv/4mLetTA==
=TW9G
-----END PGP SIGNATURE-----
Merge tag 'regulator-fix-v6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A couple of small fixes for the rk808 driver, the regulator voltage
configurations were incorrectly described.
The changes are not expected to have practical impact but given that
we're dealing with power it's generally better to follow the hardware
specification as closely as we can to avoid unexpected stresses"
* tag 'regulator-fix-v6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: rk808: fix LDO range on RK806
regulator: rk808: fix buck range on RK806
- Fix recursive kprobes regression when probing the stack unwinder
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmXp8JgQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNBsOCAC2Tlbvw90Ms/7IZSnhR/qNJ4PEwg8rrR4U
mjlc+XxDOadtXnpw0wazubVpE/Ajz3P89jUqxpp6AVEiLCq1grkqZpeJl/oVowlG
+RINfJCxqRacupaR2heyuPnGI3JnYaNkhCKwkYmnVIraxPOd9OC1vHMenlpZeWxe
ex0eykeGjg3x8Bo34g/nRgHYRx18JJPdmKKE7BqXIj7mmRbIaHCZJDjZpFotHuva
T2YlMP26dr16dFT7YOsnSQyGjcK/qmHzEJwlunlK+hWkVc1PHrUMkKgySPrJJe4x
tacEL6U5fr5iMtniaHkRgxMVdkWAKc4QzZS8EBTUpVkePaJ3z9Pl
=bhpT
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fix from Will Deacon:
"A lonely arm64 fix addressing a kprobes regression that we introduced
during the merge window:
- Fix recursive kprobes regression when probing the stack unwinder"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: prohibit probing on arch_kunwind_consume_entry()
- Fix a KMSAN uninit-value issue triggered by a crafted image;
- Fix VMA alignment for memory mapped files on THP.
-----BEGIN PGP SIGNATURE-----
iQJFBAABCgAvFiEEQ0A6bDUS9Y+83NPFUXZn5Zlu5qoFAmXp6lMRHHhpYW5nQGtl
cm5lbC5vcmcACgkQUXZn5Zlu5qoV/A/9HOFL0Q+yjVWqTq6THtheTDZrK3b7hxfW
yqNmxAtHi+Nc0GhVZnfk/ITDDqibs/CjjWZBbL7vXEydMZrzmMTo+KxVcD8VTdvX
mIFYejPhPSYL2KQ5f5fPn3eQb0YftWYzvfcCOpVgTMeWEP9bM0O2vpg1Nhl8Z6gZ
6D3+U5iEdO6HTzHtnPc9kTeKYxMmdHoxzlLdurj3MzYmF9HykITsSH1C3yE6vP3q
W0Ljf0hm8Qi5snyRUAf3GcoTAbqupzs5vLn0bCx7svYKGZt7cF4SretNDCYwDASB
oPEF/JBJlKsWjoNs2j1QhbsF9B+z+NeYY/7T82JKXupcc08LouSBjF9eDSLtEk3X
Ql0FUcmTyKHCDVCSmVLknHArZ1r+L+GGT5uV6btdj1S2b2zDz6C3O+fRdL8eAL1D
jnSw/msowoWOqNRa/mmDhWKPWVRboVZvKSkFZGP6gqf9tzD7BrTzqmRXURrkd1U5
OcHg1O0HNF0SWoVZbYIqaXMQGSgWJhJeW6s93Pj8wNHDjK8g4aQeSpDkfgcdx1j6
mILr3OwsgWAFCk3ZodCGSP5RTfaNp42o+PLtto0iiFlNvtpInemzQZRBPnNzI0sl
JZEO8rrQcr624nY7DjIhDtMNxJXBUREwDBywmTWW63Y7pYAqm8EWqXF5MgcJ5r8j
NNzAn3RZDxA=
=RskS
-----END PGP SIGNATURE-----
Merge tag 'erofs-for-6.8-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
"The main one is a KMSAN fix which addresses an issue introduced in
this cycle so it'd be much better to fix before releasing, and the
remaining one fixes VMA alignment for THP.
Summary:
- Fix a KMSAN uninit-value issue triggered by a crafted image
- Fix VMA alignment for memory mapped files on THP"
* tag 'erofs-for-6.8-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: apply proper VMA alignment for memory mapped files on THP
erofs: fix uninitialized page cache reported by KMSAN
No solution yet for the stmmac issue mentioned in the last PR,
but it proved to be a lockdep false positive, not a blocker.
Current release - regressions:
- dpll: move all dpll<>netdev helpers to dpll code, fix build
regression with old compilers
Current release - new code bugs:
- page_pool: fix netlink dump stop/resume
Previous releases - regressions:
- bpf: fix verifier to check bpf_func_state->callback_depth when pruning
states as otherwise unsafe programs could get accepted
- ipv6: avoid possible UAF in ip6_route_mpath_notify()
- ice: reconfig host after changing MSI-X on VF
- mlx5:
- e-switch, change flow rule destination checking
- add a memory barrier to prevent a possible null-ptr-deref
- switch to using _bh variant of of spinlock where needed
Previous releases - always broken:
- netfilter: nf_conntrack_h323: add protection for bmp length out of range
- bpf: fix to zero-initialise xdp_rxq_info struct before running XDP
program in CPU map which led to random xdp_md fields
- xfrm: fix UDP encapsulation in TX packet offload
- netrom: fix data-races around sysctls
- ice:
- fix potential NULL pointer dereference in ice_bridge_setlink()
- fix uninitialized dplls mutex usage
- igc: avoid returning frame twice in XDP_REDIRECT
- i40e: disable NAPI right after disabling irqs when handling xsk_pool
- geneve: make sure to pull inner header in geneve_rx()
- sparx5: fix use after free inside sparx5_del_mact_entry
- dsa: microchip: fix register write order in ksz8_ind_write8()
Misc:
- selftests: mptcp: fixes for diag.sh
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=0bH0
-----END PGP SIGNATURE-----
Merge tag 'net-6.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf, ipsec and netfilter.
No solution yet for the stmmac issue mentioned in the last PR, but it
proved to be a lockdep false positive, not a blocker.
Current release - regressions:
- dpll: move all dpll<>netdev helpers to dpll code, fix build
regression with old compilers
Current release - new code bugs:
- page_pool: fix netlink dump stop/resume
Previous releases - regressions:
- bpf: fix verifier to check bpf_func_state->callback_depth when
pruning states as otherwise unsafe programs could get accepted
- ipv6: avoid possible UAF in ip6_route_mpath_notify()
- ice: reconfig host after changing MSI-X on VF
- mlx5:
- e-switch, change flow rule destination checking
- add a memory barrier to prevent a possible null-ptr-deref
- switch to using _bh variant of of spinlock where needed
Previous releases - always broken:
- netfilter: nf_conntrack_h323: add protection for bmp length out of
range
- bpf: fix to zero-initialise xdp_rxq_info struct before running XDP
program in CPU map which led to random xdp_md fields
- xfrm: fix UDP encapsulation in TX packet offload
- netrom: fix data-races around sysctls
- ice:
- fix potential NULL pointer dereference in ice_bridge_setlink()
- fix uninitialized dplls mutex usage
- igc: avoid returning frame twice in XDP_REDIRECT
- i40e: disable NAPI right after disabling irqs when handling
xsk_pool
- geneve: make sure to pull inner header in geneve_rx()
- sparx5: fix use after free inside sparx5_del_mact_entry
- dsa: microchip: fix register write order in ksz8_ind_write8()
Misc:
- selftests: mptcp: fixes for diag.sh"
* tag 'net-6.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (63 commits)
net: pds_core: Fix possible double free in error handling path
netrom: Fix data-races around sysctl_net_busy_read
netrom: Fix a data-race around sysctl_netrom_link_fails_count
netrom: Fix a data-race around sysctl_netrom_routing_control
netrom: Fix a data-race around sysctl_netrom_transport_no_activity_timeout
netrom: Fix a data-race around sysctl_netrom_transport_requested_window_size
netrom: Fix a data-race around sysctl_netrom_transport_busy_delay
netrom: Fix a data-race around sysctl_netrom_transport_acknowledge_delay
netrom: Fix a data-race around sysctl_netrom_transport_maximum_tries
netrom: Fix a data-race around sysctl_netrom_transport_timeout
netrom: Fix data-races around sysctl_netrom_network_ttl_initialiser
netrom: Fix a data-race around sysctl_netrom_obsolescence_count_initialiser
netrom: Fix a data-race around sysctl_netrom_default_path_quality
netfilter: nf_conntrack_h323: Add protection for bmp length out of range
netfilter: nf_tables: mark set as dead when unbinding anonymous set with timeout
netfilter: nft_ct: fix l3num expectations with inet pseudo family
netfilter: nf_tables: reject constant set with timeout
netfilter: nf_tables: disallow anonymous set with timeout flag
net/rds: fix WARNING in rds_conn_connect_if_down
net: dsa: microchip: fix register write order in ksz8_ind_write8()
...
PM constants for PCI devices are defined with bitwise annotation.
When used as is, sparse complains about that:
.../catpt/dsp.c:390:9: warning: restricted pci_power_t degrades to integer
.../catpt/dsp.c:414:9: warning: restricted pci_power_t degrades to integer
Force them to be u32 in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240307163734.3852754-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Zhang Yi <zhangyi@everest-semi.com>:
We found that using 0x45 as the default value for interrupt-clk
would cause a headset detection error.So we took 0x00 as the default
value for interrupt-clk and passed the test.
We removed mic1-src and mic2-src, which were not used.
The kerneldoc for struct cs_dsp refers to a fw_file_name member but
there's no such member.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://msgid.link/r/20240307105516.40250-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>