Commit Graph

1897 Commits

Author SHA1 Message Date
Linus Torvalds
724bdd097e Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB/ehca: Reject dynamic memory add/remove when ehca adapter is present
  IB/ehca: Fix reported max number of QPs and CQs in systems with >1 adapter
  IPoIB: Set netdev offload features properly for child (VLAN) interfaces
  IPoIB: Clean up ethtool support
  mlx4_core: Add Ethernet PCI device IDs
  mlx4_en: Add driver for Mellanox ConnectX 10GbE NIC
  mlx4_core: Multiple port type support
  mlx4_core: Ethernet MAC/VLAN management
  mlx4_core: Get ethernet MTU and default address from firmware
  mlx4_core: Support multiple pre-reserved QP regions
  Update NetEffect maintainer emails to Intel emails
  RDMA/cxgb3: Remove cmid reference on tid allocation failures
  IB/mad: Use krealloc() to resize snoop table
  IPoIB: Always initialize poll_timer to avoid crash on unload
  IB/ehca: Don't allow creating UC QP with SRQ
  mlx4_core: Add QP range reservation support
  RDMA/ucma: Test ucma_alloc_multicast() return against NULL, not with IS_ERR()
2008-10-23 08:16:03 -07:00
Roland Dreier
56f2fdaade Merge branches 'cma', 'cxgb3', 'ehca', 'ipoib', 'mad', 'mlx4' and 'nes' into for-next 2008-10-22 15:56:41 -07:00
Stefan Roscher
263c24a2bb IB/ehca: Reject dynamic memory add/remove when ehca adapter is present
Since the ehca device driver does not support dynamic memory add and
remove operations, the driver must explicitly reject such requests in
order to prevent unpredictable behaviors related to existing memory
regions that cover all of memory being used by InfiniBand protocols in
the kernel.

The solution (for now at least) is to add a memory notifier to the
ehca device driver and if a request for dynamic memory add or remove
comes in, ehca will always reject it.  The user can add or remove
memory by hot-removing the ehca adapter, performing the memory
operation, and then hot-adding the ehca adapter back.

Signed-off-by: Stefan Roscher <stefan.roscher@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22 15:54:38 -07:00
Stefan Roscher
19f4282149 IB/ehca: Fix reported max number of QPs and CQs in systems with >1 adapter
Because ehca adapters can differ in the maximum number of QPs and CQs
we have to save the maximum number of these ressources per adapter and
not globally per ehca driver. This fix introduces 2 new members to the
shca structure to store the maximum value for QPs and CQs per adapter.

The module parameters are now used as initial values for those
variables.  If a user selects an invalid number of CQs or QPs we don't
print an error any longer, instead we will inform the user with a
warning and set the values to the respective maximum supported by the
HW.

Signed-off-by: Stefan Roscher <stefan.roscher@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22 15:52:31 -07:00
Or Gerlitz
83bb63f62b IPoIB: Set netdev offload features properly for child (VLAN) interfaces
Child devices were created without any offload features set, fix this by
moving the code that computes the features into generic function which is
now called through non-child and child device creation.

Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com>

-- v1 has a bug where the 'result' flag in ipoib_vlan_add may be used uninitialized
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22 15:49:49 -07:00
Or Gerlitz
70c9c0db54 IPoIB: Clean up ethtool support
Add a get_rx_csum method.  Remove the driver's own get_tso method, as
the ethtool kernel code uses the default one if nothing is provided.

Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22 15:49:29 -07:00
Yevgeny Petrilin
7ff93f8b7e mlx4_core: Multiple port type support
Multi-protocol adapters support different port types.  Each consumer
of mlx4_core queries for supported port types; in particular mlx4_ib
can no longer assume that all physical ports belong to it.  Port type
is configured through a sysfs interface.  When the type of a port is
changed, all mlx4 interfaces are unregistered, and then registered
again with the new port types.

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22 15:38:42 -07:00
Parag Warudkar
01e8ef11bc x86: sysfs: kill owner field from attribute
Tejun's commit 7b595756ec made sysfs
attribute->owner unnecessary.  But the field was left in the structure to
ease the merge.  It's been over a year since that change and it is now
time to start killing attribute->owner along with its users - one arch at
a time!

This patch is attempt #1 to get rid of attribute->owner only for
CONFIG_X86_64 or CONFIG_X86_32 .  We will deal with other arches later on
as and when possible - avr32 will be the next since that is something I
can test.  Compile (make allyesconfig / make allmodconfig / custom config)
and boot tested.

akpm: the idea is that we put the declaration of sttribute.owner inside
`#ifndef CONFIG_X86'.  But that proved to be too ambitious for now because
new usages kept on turning up in subsystem trees.

[akpm: remove the ifdef for now]
Signed-off-by: Parag Warudkar <parag.lkml@gmail.com>
Cc: Greg KH <greg@kroah.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Tejun Heo <htejun@gmail.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Roland Dreier <rolandd@cisco.com>
Cc: David Brownell <david-b@pacbell.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:42 -07:00
Linus Torvalds
ed09441dac Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (39 commits)
  [SCSI] sd: fix compile failure with CONFIG_BLK_DEV_INTEGRITY=n
  libiscsi: fix locking in iscsi_eh_device_reset
  libiscsi: check reason why we are stopping iscsi session to determine error value
  [SCSI] iscsi_tcp: return a descriptive error value during connection errors
  [SCSI] libiscsi: rename host reset to target reset
  [SCSI] iscsi class: fix endpoint id handling
  [SCSI] libiscsi: Support drivers initiating session removal
  [SCSI] libiscsi: fix data corruption when target has to resend data-in packets
  [SCSI] sd: Switch kernel printing level for DIF messages
  [SCSI] sd: Correctly handle all combinations of DIF and DIX
  [SCSI] sd: Always print actual protection_type
  [SCSI] sd: Issue correct protection operation
  [SCSI] scsi_error: fix target reset handling
  [SCSI] lpfc 8.2.8 v2 : Add statistical reporting control and additional fc vendor events
  [SCSI] lpfc 8.2.8 v2 : Add sysfs control of target queue depth handling
  [SCSI] lpfc 8.2.8 v2 : Revert target busy in favor of transport disrupted
  [SCSI] scsi_dh_alua: remove REQ_NOMERGE
  [SCSI] lpfc 8.2.8 : update driver version to 8.2.8
  [SCSI] lpfc 8.2.8 : Add MSI-X support
  [SCSI] lpfc 8.2.8 : Update driver to use new Host byte error code DID_TRANSPORT_DISRUPTED
  ...
2008-10-17 09:00:23 -07:00
Greg Kroah-Hartman
91bd418fdc device create: infiniband: convert device_create_drvdata to device_create
Now that device_create() has been audited, rename things back to the
original call to be sane.

Cc: Roland Dreier <rolandd@cisco.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Hal Rosenstock <hal.rosenstock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-16 09:24:42 -07:00
Steve Wise
dc35fac9e9 RDMA/cxgb3: Remove cmid reference on tid allocation failures
The error path in iwch_connect() can fail to drop the cmid reference,
which will cause the process to hang when destroying the cmid.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-15 10:50:34 -07:00
Roland Dreier
528051746b IB/mad: Use krealloc() to resize snoop table
Use krealloc() instead of kmalloc() followed by memcpy() when resizing
the MAD module's snoop table.

Also put parentheses around the new table size to avoid calculating
the wrong size to allocate, which fixes a bug pointed out by Haven
Hash <haven.hash@isilon.com>.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-14 14:05:36 -07:00
Steven Whitehouse
a447c09324 vfs: Use const for kernel parser table
This is a much better version of a previous patch to make the parser
tables constant. Rather than changing the typedef, we put the "const" in
all the various places where its required, allowing the __initconst
exception for nfsroot which was the cause of the previous trouble.

This was posted for review some time ago and I believe its been in -mm
since then.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Alexander Viro <aviro@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-13 10:10:37 -07:00
Mike Christie
8e12452549 [SCSI] libiscsi: rename host reset to target reset
I had this in my patchset to add target reset support, but
it got dropped due to patching conflicts. This initial patch
just renames the function and users. We are actually just
dropping the session, and so this does not have anything to do
with the host exactly. It does for software iscsi because
we allocate a host per session, but for cxgb3i this makes no
sense.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-13 09:28:59 -04:00
Mike Christie
e5bd7b54e9 [SCSI] libiscsi: Support drivers initiating session removal
If the driver knows when hardware is removed like with cxgb3i,
bnx2i, qla4xxx and iser then we will want to remove the sessions/devices
that are bound to that device before removing the host.

cxgb3i and in the future bnx2i will remove the host and that will
remove all the sessions on the hba. iser can call iscsi_kill_session
when it gets an event that indicates that a hca is removed.
And when qla4xxx is hooked in to the lib (it is only hooked into
the class right now) it can call iscsi remove host like the
partial offload card drivers.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-13 09:28:59 -04:00
Roland Dreier
2767840a5c IPoIB: Always initialize poll_timer to avoid crash on unload
ipoib_ib_dev_stop() does del_timer_sync(&priv->poll_timer), but if a
P_key for an interface is not found, poll_timer is not initialized, so
this leads to a crash or hang.  Fix this by moving where poll_timer is
initialized to ipoib_ib_dev_init(), which is always called.

This fixes <https://bugs.openfabrics.org/show_bug.cgi?id=1172>.

Debugged-by: Yosef Etigin <yosefe@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-10 15:58:52 -07:00
Hoang-Nam Nguyen
0540bbbe45 IB/ehca: Don't allow creating UC QP with SRQ
This patch prevents a UC QP to be created attached to an SRQ, since
current firmware does not support this feature.

Signed-off-by: Michael Faath <micfaath@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-10 14:40:39 -07:00
Yevgeny Petrilin
a3cdcbfa8f mlx4_core: Add QP range reservation support
To allow allocating an aligned range of consecutive QP numbers, add an
interface to reserve an aligned range of QP numbers and have the QP
allocation function always take a QP number.

This will be used for RSS support in the mlx4_en Ethernet driver and
also potentially by IPoIB RSS support.

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-10 12:01:37 -07:00
Julien Brunel
6aea938f54 RDMA/ucma: Test ucma_alloc_multicast() return against NULL, not with IS_ERR()
In case of error, the function ucma_alloc_multicast() returns a NULL
pointer, but never returns an ERR pointer.  So after a call to this
function, an IS_ERR test should be replaced by a NULL test.

The semantic match that finds this problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@match bad_is_err_test@
expression x, E;
@@

x = ucma_alloc_multicast(...)
... when != x = E
IS_ERR(x)
// </smpl>

Signed-off-by:  Julien Brunel <brunel@diku.dk>
Signed-off-by:  Julia Lawall <julia@diku.dk>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-10 12:00:19 -07:00
Roland Dreier
eedd5d0a70 Merge branches 'cma', 'cxgb3', 'ehca', 'ipath', 'ipoib', 'mad', 'misc', 'mlx4', 'mthca' and 'nes' into for-next 2008-10-09 17:41:15 -07:00
Chien Tung
fbcffcc6a0 RDMA/nes: Fix slab corruption
Referencing cm_node after it is freed via rem_ref_cm_node() causes a
slab corruption.  There is no need to set cm_node->cm_id to NULL in
mini_cm_close().

Signed-off-by: Chien Tung <ctung@neteffect.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-09 17:41:05 -07:00
Vladimir Sokolovsky
d57f5f72df IB/mlx4: Set RLKEY bit for kernel QPs
Set RLKEY bit in the HW context for kernel QPs so that kernel QPs can
use the reserved L_Key for memory reference.

Signed-off-by: Vladimir Sokolovsky <vlad@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-08 20:09:01 -07:00
Chien Tung
e2f5e7333a RDMA/nes: Correct error_module bit mask
error_module is 5 bits wide not 4.  The corresponding crit_error_count
array is correct with 32 entries.

Signed-off-by: Chien Tung <ctung@neteffect.com>
--
 drivers/infiniband/hw/nes/nes_hw.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-08 14:43:29 -07:00
Bob Sharp
7191a0a182 RDMA/nes: Fix routed RDMA connections
Fix routed RDMA connections to destinations where the next hop is not
the final destination.  Use neigh_*() to properly locate neighbor.

Signed-off-by: Bob Sharp <bsharp@neteffect.com>
Signed-off-by: Sweta Bhatt <sweta.bhatt@einfochips.com>
Signed-off-by: Chien Tung <ctung@neteffect.com>
2008-10-03 12:21:19 -07:00
Vadim Makhervaks
7e36d3d732 RDMA/nes: Enhanced PFT management scheme
Change management of perfect filter table to allow enhanced
performance applications.

Signed-off-by: Vadim Makhervaks <vmakhervaks@neteffect.com>
Signed-off-by: Sweta Bhatt <sweta.bhatt@einfochips.com>
Signed-off-by: Chien Tung <ctung@neteffect.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-03 12:21:18 -07:00
Faisal Latif
1bb2849997 RDMA/nes: Handle AE bounds violation
Handle async error NES_AEQE_AEID_AMP_BOUNDS_VIOLATION.

Signed-off-by: Faisal Latif <flatif@neteffect.com>
Signed-off-by: Sweta Bhatt <sweta.bhatt@einfochips.com>
Signed-off-by: Chien Tung <ctung@neteffect.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30 15:35:49 -07:00
Chien Tung
9d156947c7 RDMA/nes: Limit critical error interrupts
Mask off a critical error after 100 critical error interrupts to
keep the system "sane".

Signed-off-by: Sweta Bhatt <sweta.bhatt@einfochips.com>
Signed-off-by: Chien Tung <ctung@neteffect.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30 15:35:49 -07:00
Chien Tung
068e80de6a RDMA/nes: Stop spurious MAC interrupts
Mask off MAC interrupts on netdev_stop to prevent spurious MAC interrupts
on unload/reload of iw_nes.

Signed-off-by: Sweta Bhatt <sweta.bhatt@einfochips.com>
Signed-off-by: Chien Tung <ctung@neteffect.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30 15:35:49 -07:00
Chien Tung
168ac8244d RDMA/nes: Correct tso_wqe_length
Signed-off-by: Sweta Bhatt <sweta.bhatt@einfochips.com>
Signed-off-by: Chien Tung <ctung@neteffect.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30 15:35:48 -07:00
Chien Tung
0c93ae355e RDMA/nes: Fill in firmware version for ethtool
Fill in firmware version for ethtool_drvinfo.

Signed-off-by: Sweta Bhatt <sweta.bhatt@einfochips.com>
Signed-off-by: Chien Tung <ctung@neteffect.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30 15:35:48 -07:00
John Lacombe
27ffed603f RDMA/nes: Use ethtool timer value
Use timer value set via ethtool intead of #defines.

Signed-off-by: John Lacombe <jlacombe@neteffect.com>
Signed-off-by: Sweta Bhatt <sweta.bhatt@einfochips.com>
Signed-off-by: Chien Tung <ctung@neteffect.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30 15:35:48 -07:00
Bob Sharp
a06fd26d48 RDMA/nes: Correct MAX TSO frags value
Use correct define for max TSO fragments.

Signed-off-by: Bob Sharp <bsharp@neteffect.com>
Signed-off-by: Sweta Bhatt <sweta.bhatt@einfochips.com>
Signed-off-by: Chien Tung <ctung@neteffect.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30 15:35:48 -07:00
Bob Sharp
e0e31afbf9 RDMA/nes: Enable MC/UC after changing MTU
Re-enable multicast and unicast after changing MTU.

Signed-off-by: Bob Sharp <bsharp@neteffect.com>
Signed-off-by: Sweta Bhatt <sweta.bhatt@einfochips.com>
Signed-off-by: Chien Tung <ctung@neteffect.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30 15:35:47 -07:00
Bob Sharp
7a8d14070b RDMA/nes: Free NIC TX buffers when destroying NIC QP
Signed-off-by: Bob Sharp <bsharp@neteffect.com>
Signed-off-by: Sweta Bhatt <sweta.bhatt@einfochips.com>
Signed-off-by: Chien Tung <ctung@neteffect.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30 15:35:47 -07:00
Chien Tung
e88bd7b624 RDMA/nes: Fix MDC setting
Clear MDC bits before setting them to a new value.  Adjust MDC value
for 10G.

Signed-off-by: Sweta Bhatt <sweta.bhatt@einfochips.com>
Signed-off-by: Chien Tung <ctung@neteffect.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30 15:35:47 -07:00
Chien Tung
2b537c2824 RDMA/nes: Add wqm_quanta module option
Add a module parameter wqm_quanta.  It controls the number of segments
transmitted at a time.

Signed-off-by: Sweta Bhatt <sweta.bhatt@einfochips.com>
Signed-off-by: Chien Tung <ctung@neteffect.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30 15:35:46 -07:00
Chien Tung
de182149c3 RDMA/nes: Module parameter permissions
Change permission to 0644 so root can set mpa_version, disable_mpa_crc,
send_first, and nes_drv_opt at runtime.

Signed-off-by: Sweta Bhatt <sweta.bhatt@einfochips.com>
Signed-off-by: Chien Tung <ctung@neteffect.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30 15:35:46 -07:00
Jon Mason
c752c78275 RDMA/cxgb3: Set active_mtu in ib_port_attr
When running ibv_devinfo, the active_mtu returned is garbage.  This is
due to the field not being populated in the query_port function in the
driver.  The patch below populates the active_mtu field with a MTU of
2k.  It also zeros the struct, so that any new additions to it will
return 0.

Signed-off-by: Jon Mason <jon@opengridcomputing.com>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30 14:51:19 -07:00
Chien Tung
fcb7ad31be RDMA/nes: Add support for 4-port 1G HP blade card
Add support for NetEffect 4 port 1G HP blade card.  The mapping
between physical port and MAC is different from the standup card.

Signed-off-by: Chien Tung <ctung@neteffect.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30 14:49:44 -07:00
Faisal Latif
54c86a8c83 RDMA/nes: Make mini_cm_connect() static
Signed-off-by: Faisal Latif <flatif@neteffect.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30 14:47:27 -07:00
Hefty, Sean
a7e80ce26c IB/cm: Correctly free cm_device structure
commit 110cf374 ("infiniband: make cm_device use a struct device and
not a kobject.") introduced a memory leak, since it deleted
cm_release_dev_obj(), which was where cm_dev was freed.  Fix this by
freeing the leaked structure after calling device_unregister().

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30 10:36:54 -07:00
Roland Dreier
943c246e9b IPoIB: Use netif_tx_lock() and get rid of private tx_lock, LLTX
Currently, IPoIB is an LLTX driver that uses its own IRQ-disabling
tx_lock.  Not only do we want to get rid of LLTX, this actually causes
problems because of the skb_orphan() done with this tx_lock held: some
skb destructors expect to be run with interrupts enabled.

The simplest fix for this is to get rid of the driver-private tx_lock
and stop using LLTX.  We kill off priv->tx_lock and use
netif_tx_lock[_bh]() instead; the patch to do this is a tiny bit
tricky because we need to update places that take priv->lock inside
the tx_lock to disable IRQs, rather than relying on tx_lock having
already disabled IRQs.

Also, there are a couple of places where we need to disable BHs to
make sure we have a consistent context to call netif_tx_lock() (since
we no longer can use _irqsave() variants), and we also have to change
ipoib_send_comp_handler() to call drain_tx_cq() through a timer rather
than directly, because ipoib_send_comp_handler() runs in interrupt
context and drain_tx_cq() must run in BH context so it can call
netif_tx_lock().

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30 10:36:21 -07:00
Roland Dreier
208dde28b0 IB/mthca: Use pci_request_regions()
Back in prehistoric (pre-git!) days, the kernel's MSI-X support did
request_mem_region() on a device's MSI-X tables, which meant that a
driver that enabled MSI-X couldn't use pci_request_regions() (since
that would clash with the PCI layer's MSI-X request).

However, that was removed (by me!) years ago, so mthca can just use
pci_request_regions() and pci_release_regions() instead of its own
much more complicated code that avoids requesting the MSI-X tables.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-29 21:37:33 -07:00
Yannick Cote
e441d63428 IB/ipath: Fix hang on module unload
Handle the case where posting a send is requested when the link is
down.  This fixes <https://bugs.openfabrics.org/show_bug.cgi?id=1117>.

Signed-off-by: Yannick Cote <yannick.cote@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-29 21:24:04 -07:00
Roland Dreier
c9da4bad5b IPoIB: Fix crash when path record fails after path flush
Commit ee1e2c82 ("IPoIB: Refresh paths instead of flushing them on SM
change events") changed how paths are flushed on an SM event.  This
change introduces a problem if the path record query triggered by
fails, causing path->ah to become NULL.  A later successful path query
will then trigger WARN_ON() in path_rec_completion(), and crash
because path->ah has already been freed, so the ipoib_put_ah() inside
the lock in path_rec_completion() may actually drop the last reference
(contrary to the comment that claims this is safe).

Fix this by updating path->ah and freeing old_ah only when the path
record query is successful.  This prevents the neighbour AH and that
path AH from getting out of sync.

This fixes <https://bugs.openfabrics.org/show_bug.cgi?id=1194>

Reported-by: Rabah Salem <ravah@mellanox.com>
Debugged-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-25 15:26:15 -07:00
Julia Lawall
cd86f42061 IB: Drop code after return statement
A break after a return serves no purpose, remove it.

Signed-off-by: Julia Lawall <julia@diku.dk>
Reviewed-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-20 20:06:32 -07:00
Michael Brooks
7097228c54 IB/mad: Don't discard BMA responses in kernel
This fixes the problem of incoming BMA responses being dropped due to
a bad "is response" check.  Fix the test to use the ib_response_mad()
predicate, which correctly handles BMA MADs.

This fixes <https://bugs.openfabrics.org/show_bug.cgi?id=988>.

Signed-off-by: Michael Brooks <michael.brooks@qlogic.com>
Acked-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-20 20:06:16 -07:00
Ralph Campbell
9403589675 IB/ipath: Fix SLID generation for RC/UC QPs when LMC > 0
The code to set the source LID in the sent LRH was not setting the low
bits if LMC != 0 for RC/UC QPs.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-20 20:05:51 -07:00
Alexander Schmidt
b9012e0a42 IB/ehca: Generate flush status CQ entries
When a QP goes into error state, it is required that CQ entries with a
flush error status are delivered to the application for any
outstanding work requests.  eHCA does not do this in hardware, so this
patch adds software flush CQE generation to the ehca driver.

Whenever a QP gets into error state, it is added to the QP error list
of its respective CQ.  If the error QP list of a CQ is not empty,
poll_cq() generates flush CQEs before polling the actual CQ.

Signed-off-by: Alexander Schmidt <alexs@linux.vnet.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-20 20:05:21 -07:00
Linus Torvalds
5a0cd4eb66 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IPoIB: Fix deadlock on RTNL between bcast join comp and ipoib_stop()
  RDMA/nes: Fix client side QP destroy
  IB/mlx4: Fix up fast register page list format
  mlx4_core: Set RAE and init mtt_sz field in FRMR MPT entries
2008-09-19 16:18:21 -07:00