It makes no sense to call midcomms/lowcomms functionality for the local
node as socket functionality is only required for remote nodes. This
patch filters those calls in the upper layer of lockspace membership
handling instead of doing it in midcomms/lowcomms layer as they should
never be aware of local nodeid.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch warns about messages which are received from nodes who
already left the lockspace resource signaled by the cluster manager.
Before commit 489d8e559c ("fs: dlm: add reliable connection if
reconnect") there was a synchronization issue with the socket
lifetime and the cluster event of leaving a lockspace and other
nodes did not stop of sending messages because the cluster manager has a
pending message to leave the lockspace. The reliable session layer for
dlm use sequence numbers to ensure dlm message were never being dropped.
If this is not corrected synchronized we have a problem, this patch will
use the filter case and turn it into a WARN_ON_ONCE() so we seeing such
issue on the kernel log because it should never happen now.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch moves the dlm_purge_lkb_callbacks() function from ast to user
dlm module as it is only a function being used by dlm user
implementation. I got be hinted to hold specific locks regarding the
callback handling for dlm_purge_lkb_callbacks() but it was false
positive. It is confusing because ast dlm implementation uses a
different locking behaviour as user locks uses as DLM handles kernel and
user dlm locks differently. To avoid the confusing we move this function
to dlm user implementation.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
There should no difference between setting the CF_IO_STOP flag
before restore_callbacks() to do it before or afterwards. The
restore_callbacks() will be sure that no callback is executed anymore
when the bit wasn't set.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch removes an another check if con->othercon set inside the
branch which already does that.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
The dlm modules midcomms, debugfs, lockspace, uses kmem caches. We
ensure that the kmem caches getting deallocated after those modules
exited.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch sets the process_dlm_messages_pending boolean to false when
there was no message to process. It is a case which should not happen
but if we are prepared to recover from this situation by setting pending
boolean to false.
Cc: stable@vger.kernel.org
Fixes: dbb751ffab ("fs: dlm: parallelize lowcomms socket handling")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch clears the DLM_IFL_CB_PENDING_BIT flag which will be set when
there is callback work queued when there was no callback to dequeue. It
is a buggy case and should never happen, that's why there is a
WARN_ON(). However if the case happens we are prepared to somehow
recover from it.
Cc: stable@vger.kernel.org
Fixes: 61bed0baa4 ("fs: dlm: use a non-static queue for callbacks")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch reverts commit 2c3fa6ae4d ("dlm: check required context
while close"). The function dlm_midcomms_close(), which will call later
dlm_lowcomms_close(), is called when the cluster manager tells the node
got fenced which means on midcomms/lowcomms layer to disconnect the node
from the cluster communication. The node can rejoin the cluster later.
This patch was ensuring no new message were able to be triggered when we
are in the close() function context. This was done by checking if the
lockspace has been stopped. However there is a missing check that we
only need to check specific lockspaces where the fenced node is member
of. This is currently complicated because there is no way to easily
check if a node is part of a specific lockspace without stopping the
recovery. For now we just revert this commit as it is just a check to
finding possible leaks of stopping lockspaces before close() is called.
Cc: stable@vger.kernel.org
Fixes: 2c3fa6ae4d ("dlm: check required context while close")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
When a waiting plock request (F_SETLKW) is sent to userspace
for processing (dlm_controld), the result is returned at a
later time. That result could be incorrectly matched to a
different waiting request in cases where the owner field is
the same (e.g. different threads in a process.) This is fixed
by comparing all the properties in the request and reply.
The results for non-waiting plock requests are now matched
based on list order because the results are returned in the
same order they were sent.
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
While a non-waiting posix lock request (F_SETLK) is waiting for
user space processing (in dlm_controld), wait for that processing
to complete with an unkillable wait_event(). This makes F_SETLK
behave the same way for F_RDLCK, F_WRLCK and F_UNLCK. F_SETLKW
continues to use wait_event_killable().
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
If a posix lock request is waiting for a result from user space
(dlm_controld), do not let it be interrupted unless the process
is killed. This reverts commit a6b1533e9a ("dlm: make posix locks
interruptible"). The problem with the interruptible change is
that all locks were cleared on any signal interrupt. If a signal
was received that did not terminate the process, the process
could continue running after all its dlm posix locks had been
cleared. A future patch will add cancelation to allow proper
interruption.
Cc: stable@vger.kernel.org
Fixes: a6b1533e9a ("dlm: make posix locks interruptible")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Immediately clean up a posix lock request if it is interrupted
while waiting for a result from user space (dlm_controld.) This
largely reverts the recent commit b92a4e3f86 ("fs: dlm: change
posix lock sigint handling"). That previous commit attempted
to defer lock cleanup to the point in time when a result from
user space arrived. The deferred approach was not reliable
because some dlm plock ops may not receive replies.
Cc: stable@vger.kernel.org
Fixes: b92a4e3f86 ("fs: dlm: change posix lock sigint handling")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
The GETLK pid values have all been negated since commit 9d5b86ac13
("fs/locks: Remove fl_nspid and use fs-specific l_pid for remote locks").
Revert this for local pids, and leave in place negative pids for remote
owners.
Cc: stable@vger.kernel.org
Fixes: 9d5b86ac13 ("fs/locks: Remove fl_nspid and use fs-specific l_pid for remote locks")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overflows if a source string is not NUL-terminated [1].
In an effort to remove strlcpy() completely [2], replace
strlcpy() here with strscpy().
No return values were used, so direct replacement is safe.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89
Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com>
Signed-off-by: David Teigland <teigland@redhat.com>
* Plug a race in the stage-2 mapping code where the IPA and the PA
would end up being out of sync
* Make better use of the bitmap API (bitmap_zero, bitmap_zalloc...)
* FP/SVE/SME documentation update, in the hope that this field
becomes clearer...
* Add workaround for Apple SEIS brokenness to a new SoC
* Random comment fixes
x86:
* add MSR_IA32_TSX_CTRL into msrs_to_save
* fixes for XCR0 handling in SGX enclaves
Generic:
* Fix vcpu_array[0] races
* Fix race between starting a VM and "reboot -f"
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmRp0WIUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPqVwf+OFayNPpURAFqfrOuISYW7hoCL24+
sCtXyVv4Ei0np1vGekit2h/m8GmxO12xEBibcFeYj+YQItIqu9HvC08fRxAKaMeE
N3p9iLuS1zcM3cEuZpg0r6QN+pKybttdadl70yho43CtagEM4FmB7dgyAo9AhyXk
pZUaVfoO6beBQ/J6A6V/Q5xlue1LvHk1+K4rmNcYVTYn6ZOd+yYgvqng1nv5/h9b
0HgW0aUWkEHAB67/sSnUUro707loMNTowsZlMCtgDk4Fzf8RwQ7qc8lClLk1UPjJ
DHB6Hif9F0Q5mkrwn+c7xyVlKARaY6/FOshS2Q620q19+4fq5fUD9HgjrQ==
=ARzH
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Plug a race in the stage-2 mapping code where the IPA and the PA
would end up being out of sync
- Make better use of the bitmap API (bitmap_zero, bitmap_zalloc...)
- FP/SVE/SME documentation update, in the hope that this field
becomes clearer...
- Add workaround for Apple SEIS brokenness to a new SoC
- Random comment fixes
x86:
- add MSR_IA32_TSX_CTRL into msrs_to_save
- fixes for XCR0 handling in SGX enclaves
Generic:
- Fix vcpu_array[0] races
- Fix race between starting a VM and 'reboot -f'"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: VMX: add MSR_IA32_TSX_CTRL into msrs_to_save
KVM: x86: Don't adjust guest's CPUID.0x12.1 (allowed SGX enclave XFRM)
KVM: VMX: Don't rely _only_ on CPUID to enforce XCR0 restrictions for ECREATE
KVM: Fix vcpu_array[0] races
KVM: VMX: Fix header file dependency of asm/vmx.h
KVM: Don't enable hardware after a restart/shutdown is initiated
KVM: Use syscore_ops instead of reboot_notifier to hook restart/shutdown
KVM: arm64: vgic: Add Apple M2 PRO/MAX cpus to the list of broken SEIS implementations
KVM: arm64: Clarify host SME state management
KVM: arm64: Restructure check for SVE support in FP trap handler
KVM: arm64: Document check for TIF_FOREIGN_FPSTATE
KVM: arm64: Fix repeated words in comments
KVM: arm64: Constify start/end/phys fields of the pgtable walker data
KVM: arm64: Infer PA offset from VA in hyp map walker
KVM: arm64: Infer the PA offset from IPA in stage-2 map walker
KVM: arm64: Use the bitmap API to allocate bitmaps
KVM: arm64: Slightly optimize flush_context()
- Fail graciously if BUILD_BPF_SKEL=1 is specified and clang isn't available.
- Add empty 'struct rq' to 'perf lock contention' to satisfy libbpf 'runqueue'
type verification. This feature is built only with BUILD_BPF_SKEL=1.
- Make vmlinux.h use bpf.h and perf_event.h in source directory, not system
ones that may be old and not have things like 'union perf_sample_weight'.
- Add system include paths to BPF builds to pick things missing in the headers
included by clang -target bpf.
- Update various header copies with the kernel sources.
- Change divide by zero and not supported events behavior to show 'nan'/'not
counted' in 'perf stat' output. This happens when using things like
'perf stat -M TopdownL2 true', involving JSON metrics.
- Update no event/metric expectations affected by using JSON metrics in
'perf stat -ddd' perf test.
- Avoid segv with 'perf stat --topdown' for metrics without a group.
- Do not assume which events may have a PMU name, allowing the logic to keep an
AUX event group together. Makes this usecase work again:
$ perf record --no-bpf-event -c 10 -e '{intel_pt//,tlb_flush.stlb_any/aux-sample-size=8192/pp}:u' -- sleep 0.1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.078 MB perf.data ]
$ perf script -F-dso,+addr | grep -C5 tlb_flush.stlb_any | head -11
sleep 20444 [003] 7939.510243: 1 branches:uH: 7f5350cc82a2 dl_main+0x9a2 => 7f5350cb38f0 _dl_add_to_namespace_list+0x0
sleep 20444 [003] 7939.510243: 1 branches:uH: 7f5350cb3908 _dl_add_to_namespace_list+0x18 => 7f5350cbb080 rtld_mutex_dummy+0x0
sleep 20444 [003] 7939.510243: 1 branches:uH: 7f5350cc8350 dl_main+0xa50 => 0 [unknown]
sleep 20444 [003] 7939.510244: 1 branches:uH: 7f5350cc83ca dl_main+0xaca => 7f5350caeb60 _dl_process_pt_gnu_property+0x0
sleep 20444 [003] 7939.510245: 1 branches:uH: 7f5350caeb60 _dl_process_pt_gnu_property+0x0 => 0 [unknown]
sleep 20444 7939.510245: 10 tlb_flush.stlb_any/aux-sample-size=8192/pp: 0 7f5350caeb60 _dl_process_pt_gnu_property+0x0
sleep 20444 [003] 7939.510254: 1 branches:uH: 7f5350cc87fe dl_main+0xefe => 7f5350ccd240 strcmp+0x0
sleep 20444 [003] 7939.510254: 1 branches:uH: 7f5350cc8862 dl_main+0xf62 => 0 [unknown]
- Add a check for the above use case in 'perf test test_intel_pt'.
- Fix build with refcount checking on arm64, it was still accessing fields that
need to be wrapped so that the refcounted struct gets checked.
- Fix contextid validation in ARM's CS-ETM, so that older kernels without that
field can still be supported.
- Skip unsupported aggregation for stat events found in perf.data files in 'perf script'.
- Add stat test for record and script to check the previous problem.
- Remove needless debuginfod queries from 'perf test java symbol', this was
just making the test take a long time to complete.
- Address python SafeConfigParser() deprecation warning in 'perf test attr'.
- Fix __NR_execve undeclared on i386 'perf bench syscall' build error.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCZGkUygAKCRCyPKLppCJ+
J8LGAP9qi9fvOt96aXLKHPn/op5KjmvnhZH3/Dj/XPnD8xRNOgD/cQu2D/h8zy9h
NAf0lnJZKiyBGwIrCp1i89snxklnxgA=
=Vztu
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v6.4-1-2023-05-20' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fail graciously if BUILD_BPF_SKEL=1 is specified and clang isn't
available
- Add empty 'struct rq' to 'perf lock contention' to satisfy libbpf
'runqueue' type verification. This feature is built only with
BUILD_BPF_SKEL=1
- Make vmlinux.h use bpf.h and perf_event.h in source directory, not
system ones that may be old and not have things like 'union
perf_sample_weight'
- Add system include paths to BPF builds to pick things missing in the
headers included by clang -target bpf
- Update various header copies with the kernel sources
- Change divide by zero and not supported events behavior to show
'nan'/'not counted' in 'perf stat' output.
This happens when using things like 'perf stat -M TopdownL2 true',
involving JSON metrics
- Update no event/metric expectations affected by using JSON metrics in
'perf stat -ddd' perf test
- Avoid segv with 'perf stat --topdown' for metrics without a group
- Do not assume which events may have a PMU name, allowing the logic to
keep an AUX event group together. Makes this usecase work again:
$ perf record --no-bpf-event -c 10 -e '{intel_pt//,tlb_flush.stlb_any/aux-sample-size=8192/pp}:u' -- sleep 0.1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.078 MB perf.data ]
$ perf script -F-dso,+addr | grep -C5 tlb_flush.stlb_any | head -11
sleep 20444 [003] 7939.510243: 1 branches:uH: 7f5350cc82a2 dl_main+0x9a2 => 7f5350cb38f0 _dl_add_to_namespace_list+0x0
sleep 20444 [003] 7939.510243: 1 branches:uH: 7f5350cb3908 _dl_add_to_namespace_list+0x18 => 7f5350cbb080 rtld_mutex_dummy+0x0
sleep 20444 [003] 7939.510243: 1 branches:uH: 7f5350cc8350 dl_main+0xa50 => 0 [unknown]
sleep 20444 [003] 7939.510244: 1 branches:uH: 7f5350cc83ca dl_main+0xaca => 7f5350caeb60 _dl_process_pt_gnu_property+0x0
sleep 20444 [003] 7939.510245: 1 branches:uH: 7f5350caeb60 _dl_process_pt_gnu_property+0x0 => 0 [unknown]
sleep 20444 7939.510245: 10 tlb_flush.stlb_any/aux-sample-size=8192/pp: 0 7f5350caeb60 _dl_process_pt_gnu_property+0x0
sleep 20444 [003] 7939.510254: 1 branches:uH: 7f5350cc87fe dl_main+0xefe => 7f5350ccd240 strcmp+0x0
sleep 20444 [003] 7939.510254: 1 branches:uH: 7f5350cc8862 dl_main+0xf62 => 0 [unknown]
- Add a check for the above use case in 'perf test test_intel_pt'
- Fix build with refcount checking on arm64, it was still accessing
fields that need to be wrapped so that the refcounted struct gets
checked
- Fix contextid validation in ARM's CS-ETM, so that older kernels
without that field can still be supported
- Skip unsupported aggregation for stat events found in perf.data files
in 'perf script'
- Add stat test for record and script to check the previous problem
- Remove needless debuginfod queries from 'perf test java symbol', this
was just making the test take a long time to complete
- Address python SafeConfigParser() deprecation warning in 'perf test
attr'
- Fix __NR_execve undeclared on i386 'perf bench syscall' build error
* tag 'perf-tools-fixes-for-v6.4-1-2023-05-20' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (33 commits)
perf bench syscall: Fix __NR_execve undeclared build error
perf test attr: Fix python SafeConfigParser() deprecation warning
perf test attr: Update no event/metric expectations
tools headers disabled-features: Sync with the kernel sources
tools headers UAPI: Sync arch prctl headers with the kernel sources
tools headers: Update the copy of x86's mem{cpy,set}_64.S used in 'perf bench'
tools headers x86 cpufeatures: Sync with the kernel sources
tools headers UAPI: Sync s390 syscall table file that wires up the memfd_secret syscall
tools headers UAPI: Sync linux/prctl.h with the kernel sources
perf metrics: Avoid segv with --topdown for metrics without a group
perf lock contention: Add empty 'struct rq' to satisfy libbpf 'runqueue' type verification
perf cs-etm: Fix contextid validation
perf arm64: Fix build with refcount checking
perf test: Add stat test for record and script
perf script: Skip aggregation for stat events
perf build: Add system include paths to BPF builds
perf bpf skels: Make vmlinux.h use bpf.h and perf_event.h in source directory
perf parse-events: Do not break up AUX event group
perf test test_intel_pt.sh: Test sample mode with event with PMU name
perf evsel: Modify group pmu name for software events
...
- Fix broken soft dirty tracking when using the Radix MMU (>= P9).
- Fix ISA mapping when "ranges" property is not present, for PASemi Nemo boards.
- Fix a possible WARN_ON_ONCE hitting in BPF extable handling.
- Fix incorrect DMA address handling when using 2MB TCEs.
- Fix a bug in IOMMU table handling for SR-IOV devices.
- Fix the recent rework of IOMMU handling which left arch code calling clean
up routines that are handled by the IOMMU core.
- A few assorted build fixes.
Thanks to: Christian Zigotzky, Dan Horák, Gaurav Batra, Hari Bathini, Jason
Gunthorpe, Nathan Chancellor, Naveen N. Rao, Nicholas Piggin, Pali Rohár, Randy
Dunlap, Rob Herring.
-----BEGIN PGP SIGNATURE-----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=mz+r
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix broken soft dirty tracking when using the Radix MMU (>= P9)
- Fix ISA mapping when "ranges" property is not present, for PASemi
Nemo boards
- Fix a possible WARN_ON_ONCE hitting in BPF extable handling
- Fix incorrect DMA address handling when using 2MB TCEs
- Fix a bug in IOMMU table handling for SR-IOV devices
- Fix the recent rework of IOMMU handling which left arch code calling
clean up routines that are handled by the IOMMU core
- A few assorted build fixes
Thanks to Christian Zigotzky, Dan Horák, Gaurav Batra, Hari Bathini,
Jason Gunthorpe, Nathan Chancellor, Naveen N. Rao, Nicholas Piggin, Pali
Rohár, Randy Dunlap, and Rob Herring.
* tag 'powerpc-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/iommu: Incorrect DDW Table is referenced for SR-IOV device
powerpc/iommu: DMA address offset is incorrectly calculated with 2MB TCEs
powerpc/iommu: Remove iommu_del_device()
powerpc/crypto: Fix aes-gcm-p10 build when VSX=n
powerpc/bpf: populate extable entries only during the last pass
powerpc/boot: Disable power10 features after BOOTAFLAGS assignment
powerpc/64s/radix: Fix soft dirty tracking
powerpc/fsl_uli1575: fix kconfig warnings and build errors
powerpc/isa-bridge: Fix ISA mapping when "ranges" is not present
* Fix DT binding for the ahci-ceva driver to fully describe all iommus,
from Michal.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCZGoEPAAKCRDdoc3SxdoY
dk1OAQCo3klTiCDydJ2FIOz7XO1UhSfbt+reIkMSd55iSztnZQD/Yk7h9MBzPyAk
X5c+bf66HGMpbUFO2SYXK5b1aRb8tAo=
=R0jk
-----END PGP SIGNATURE-----
Merge tag 'ata-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ata fix from Damien Le Moal:
- Fix DT binding for the ahci-ceva driver to fully describe all iommus,
from Michal
* tag 'ata-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
dt-bindings: ata: ahci-ceva: Cover all 4 iommus entries
- Fix for USB endpoint check in udlfb (found by syzbot fuzzer)
- Small fix in error code path in omapfb
- compiler warning fixes in fbmem & i810
- code removal and whitespace cleanups in stifb and atyfb
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZGnroAAKCRD3ErUQojoP
X8VOAP0XokcmGLqsBv0ED4y4sPFnDlrGuwnm9br+IVSd2BeSgwD/cJ2DrXBbRK12
p2wGannItDCv4K6dCYvsKSfG7avWbgw=
=0/H9
-----END PGP SIGNATURE-----
Merge tag 'fbdev-for-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes from Helge Deller:
"A few small unspectacular fbdev fixes:
- Fix for USB endpoint check in udlfb (found by syzbot fuzzer)
- Small fix in error code path in omapfb
- compiler warning fixes in fbmem & i810
- code removal and whitespace cleanups in stifb and atyfb"
* tag 'fbdev-for-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: stifb: Whitespace cleanups
fbdev: udlfb: Use usb_control_msg_send()
fbdev: udlfb: Fix endpoint check
fbdev: atyfb: Remove unused clock determination
fbdev: i810: include i810_main.h in i810_dvt.c
fbdev: fbmem: mark get_fb_unmapped_area() static
fbdev: omapfb: panel-tpo-td043mtea1: fix error code in probe()
-----BEGIN PGP SIGNATURE-----
iQGzBAABCgAdFiEE6fsu8pdIjtWE/DpLiiy9cAdyT1EFAmRppOoACgkQiiy9cAdy
T1GXBAv9FP5orZJKZ2yR+k/xAccodIPUlAx9ZcfBw9rV8dihny0RzOhafRm4FUln
EuXoS+nWAxNiaOfLZDQ6PezzeVtYbNvlx5EOZ3tZt2I4tb65hdgdiP9axgo6KtfY
dXMH+Ml2wNxgey9HOfDzDnxdGpBXiNaKlIMbBf0BdtTzvo+BNQulP21P/8SLJg11
mbHj9XBouae5D7yakJlefq09wKgzolK5ZYqQyLSF2gpVPzQHB+m0zNXBaaHFQbdC
7xHr+wPBLERyNnEW6F9WBZ9d5ayqdt+UE6HjxeQtnXzkQgrWHKMqJfdEcwjitYCN
CNTpGdJGxoi7JjbJczPcG3bglJPpOPwbOdu7MTMvom/o4DhR8jrxjtv69k8Kt8ZH
WSHsS/740psJFnRf9nY82DHEY1Hy27V/5xtLOjvV2C2nR/Z0KUDIR6/lWnpuWUyU
is/pTbTFGOqQ6xtxnfIFgSx6aYRgbR1chljBzalPKtzuNLipyAKNePRBELYo9hko
y+M7HtAQ
=ZNmq
-----END PGP SIGNATURE-----
Merge tag '6.4-rc2-ksmbd-server-fixes' of git://git.samba.org/ksmbd
Pull ksmbd server fixes from Steve French:
- two fixes for incorrect SMB3 message validation (one for client which
uses 8 byte padding, and one for empty bcc)
- two fixes for out of bounds bugs: one for username offset checks (in
session setup) and the other for create context name length checks in
open requests
* tag '6.4-rc2-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: smb2: Allow messages padded to 8byte boundary
ksmbd: allocate one more byte for implied bcc[0]
ksmbd: fix wrong UserName check in session_user
ksmbd: fix global-out-of-bounds in smb2_find_context_vals
-----BEGIN PGP SIGNATURE-----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=hi0y
-----END PGP SIGNATURE-----
Merge tag '6.4-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs client fixes from Steve French:
"Two smb3 client fixes, both related to deferred close, and also for
stable:
- send close for deferred handles before not after lease break
response to avoid possible sharing violations
- check all opens on an inode (looking for deferred handles) when
lease break is returned not just the handle the lease break came in
on"
* tag '6.4-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
SMB3: drop reference to cfile before sending oplock break
SMB3: Close all deferred handles of inode in case of handle lease break
Add MSR_IA32_TSX_CTRL into msrs_to_save[] to explicitly tell userspace to
save/restore the register value during migration. Missing this may cause
userspace that relies on KVM ioctl(KVM_GET_MSR_INDEX_LIST) fail to port the
value to the target VM.
In addition, there is no need to add MSR_IA32_TSX_CTRL when
ARCH_CAP_TSX_CTRL_MSR is not supported in kvm_get_arch_capabilities(). So
add the checking in kvm_probe_msr_to_save().
Fixes: c11f83e062 ("KVM: vmx: implement MSR_IA32_TSX_CTRL disable RTM functionality")
Reported-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20230509032348.1153070-1-mizhang@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop KVM's manipulation of guest's CPUID.0x12.1 ECX and EDX, i.e. the
allowed XFRM of SGX enclaves, now that KVM explicitly checks the guest's
allowed XCR0 when emulating ECREATE.
Note, this could theoretically break a setup where userspace advertises
a "bad" XFRM and relies on KVM to provide a sane CPUID model, but QEMU
is the only known user of KVM SGX, and QEMU explicitly sets the SGX CPUID
XFRM subleaf based on the guest's XCR0.
Reviewed-by: Kai Huang <kai.huang@intel.com>
Tested-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230503160838.3412617-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Explicitly check the vCPU's supported XCR0 when determining whether or not
the XFRM for ECREATE is valid. Checking CPUID works because KVM updates
guest CPUID.0x12.1 to restrict the leaf to a subset of the guest's allowed
XCR0, but that is rather subtle and KVM should not modify guest CPUID
except for modeling true runtime behavior (allowed XFRM is most definitely
not "runtime" behavior).
Reviewed-by: Kai Huang <kai.huang@intel.com>
Tested-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230503160838.3412617-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the newly introduced usb_control_msg_send() instead of usb_control_msg()
when selecting the channel.
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Helge Deller <deller@gmx.de>
Here are some small tty and serial driver fixes for 6.4-rc3 to resolve
some reported problems, and add some new device ids. These include:
- termios documentation updates
- vc_screen use-after-free fix
- memory leak fix in arc_uart driver
- new 8250 driver ids
- other small serial driver fixes
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZGj81w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymjHACfSNJWXivuDTI5KEAkUPLfi1zg5xUAn0x1Demd
NYV1GFn76O0Ijfs6JLll
=0YxQ
-----END PGP SIGNATURE-----
Merge tag 'tty-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial fixes from Greg KH:
"Here are some small tty and serial driver fixes for 6.4-rc3 to resolve
some reported problems, and add some new device ids. These include:
- termios documentation updates
- vc_screen use-after-free fix
- memory leak fix in arc_uart driver
- new 8250 driver ids
- other small serial driver fixes
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
vc_screen: reload load of struct vc_data pointer in vcs_write() to avoid UAF
serial: qcom-geni: fix enabling deactivated interrupt
serial: 8250_bcm7271: fix leak in `brcmuart_probe`
serial: 8250_bcm7271: balance clk_enable calls
serial: arc_uart: fix of_iomap leak in `arc_serial_probe`
serial: 8250: Document termios parameter of serial8250_em485_config()
serial: Add support for Advantech PCI-1611U card
serial: 8250_exar: Add support for USR298x PCI Modems
Here are some USB fixes for 6.4-rc3, as well as a driver core fix that
resolves a memory leak that shows up in USB devices easier than other
subsystems.
Included in here are:
- driver core memory leak as reported and tested by syzbot and
developers
- dwc3 driver fixes for reported problems
- xhci driver fixes for reported problems
- USB gadget driver reverts to resolve regressions
- usbtmc driver fix for syzbot reported problem
- thunderbolt driver fixes for reported issues
- other small USB fixes
All of these, except for the driver core fix, have been in linux-next
with no reported problems. The driver core fix was tested and verified
to solve the issue by syzbot and the original reporter.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZGj97Q8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynhBQCgmc/r5Kx4qBWrf32w6LbGzLC1KDUAoI79Ix7g
7SEM1fqaTWgnCC3gl/cB
=6AOH
-----END PGP SIGNATURE-----
Merge tag 'usb-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt fixes from Greg KH:
"Here are some USB fixes for 6.4-rc3, as well as a driver core fix that
resolves a memory leak that shows up in USB devices easier than other
subsystems.
Included in here are:
- driver core memory leak as reported and tested by syzbot and
developers
- dwc3 driver fixes for reported problems
- xhci driver fixes for reported problems
- USB gadget driver reverts to resolve regressions
- usbtmc driver fix for syzbot reported problem
- thunderbolt driver fixes for reported issues
- other small USB fixes
All of these, except for the driver core fix, have been in linux-next
with no reported problems. The driver core fix was tested and verified
to solve the issue by syzbot and the original reporter"
* tag 'usb-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
driver core: class: properly reference count class_dev_iter()
xhci: Fix incorrect tracking of free space on transfer rings
xhci-pci: Only run d3cold avoidance quirk for s2idle
usb-storage: fix deadlock when a scsi command timeouts more than once
usb: dwc3: fix a test for error in dwc3_core_init()
usb: typec: tps6598x: Fix fault at module removal
usb: gadget: u_ether: Fix host MAC address case
usb: typec: altmodes/displayport: fix pin_assignment_show
Revert "usb: gadget: udc: core: Invoke usb_gadget_connect only when started"
Revert "usb: gadget: udc: core: Prevent redundant calls to pullup"
usb: gadget: drop superfluous ':' in doc string
usb: dwc3: debugfs: Resume dwc3 before accessing registers
USB: UHCI: adjust zhaoxin UHCI controllers OverCurrent bit value
usb: dwc3: fix gadget mode suspend interrupt handler issue
usb: dwc3: gadget: Improve dwc3_gadget_suspend() and dwc3_gadget_resume()
USB: usbtmc: Fix direction for 0-length ioctl control messages
thunderbolt: Clear registers properly when auto clear isn't in use
The NFL4_UFLG_MASK define slipped in in commit 9208d41497
("block: add a ->get_unique_id method") and should never have been
added, as NFSD as the only user of it already has it's copy.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230520090010.527046-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The syzbot fuzzer detected a problem in the udlfb driver, caused by an
endpoint not having the expected type:
usb 1-1: Read EDID byte 0 failed: -71
usb 1-1: Unable to get valid EDID from device/display
------------[ cut here ]------------
usb 1-1: BOGUS urb xfer, pipe 3 != type 1
WARNING: CPU: 0 PID: 9 at drivers/usb/core/urb.c:504 usb_submit_urb+0xed6/0x1880
drivers/usb/core/urb.c:504
Modules linked in:
CPU: 0 PID: 9 Comm: kworker/0:1 Not tainted
6.4.0-rc1-syzkaller-00016-ga4422ff22142 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google
04/28/2023
Workqueue: usb_hub_wq hub_event
RIP: 0010:usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504
...
Call Trace:
<TASK>
dlfb_submit_urb+0x92/0x180 drivers/video/fbdev/udlfb.c:1980
dlfb_set_video_mode+0x21f0/0x2950 drivers/video/fbdev/udlfb.c:315
dlfb_ops_set_par+0x2a7/0x8d0 drivers/video/fbdev/udlfb.c:1111
dlfb_usb_probe+0x149a/0x2710 drivers/video/fbdev/udlfb.c:1743
The current approach for this issue failed to catch the problem
because it only checks for the existence of a bulk-OUT endpoint; it
doesn't check whether this endpoint is the one that the driver will
actually use.
We can fix the problem by instead checking that the endpoint used by
the driver does exist and is bulk-OUT.
Reported-and-tested-by: syzbot+0e22d63dcebb802b9bc8@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Pavel Skripkin <paskripkin@gmail.com>
Fixes: aaf7dbe073 ("video: fbdev: udlfb: properly check endpoint type")
Signed-off-by: Helge Deller <deller@gmx.de>
Just below the removed lines par->clk_wr_offset is hard coded to 3 so
there is no use in determining a different clock just to then ignore it
anyway. This also removes the only I/O port use remaining in the driver
allowing it to be built without CONFIG_HAS_IOPORT.
Link: https://lore.kernel.org/all/ZBx5aLo5h546BzBt@intel.com/
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Building with W=1 shows that a header needs to be included to
make the prototypes visible:
drivers/video/fbdev/i810/i810_dvt.c:194:6: error: no previous prototype for 'round_off_xres' [-Werror=missing-prototypes]
drivers/video/fbdev/i810/i810_dvt.c:233:6: error: no previous prototype for 'i810fb_encode_registers' [-Werror=missing-prototypes]
drivers/video/fbdev/i810/i810_dvt.c:245:6: error: no previous prototype for 'i810fb_fill_var_timings' [-Werror=missing-prototypes]
drivers/video/fbdev/i810/i810_dvt.c:279:5: error: no previous prototype for 'i810_get_watermark' [-Werror=missing-prototypes]
Adding the header leads to another warning from a mismatched
prototype, so fix this as well:
drivers/video/fbdev/i810/i810_dvt.c:280:5: error: conflicting types for 'i810_get_watermark'; have 'u32(struct fb_var_screeninfo *,
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Helge Deller <deller@gmx.de>
There is a global function with this name on sparc, but no
global declaration:
drivers/video/fbdev/core/fbmem.c:1469:15: error: no previous prototype for 'get_fb_unmapped_area'
Make the generic definition static to avoid this warning. On
sparc, this is never seen.
Edit by Helge:
Update Kconfig text as suggested by Geert Uytterhoeven.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Helge Deller <deller@gmx.de>
User should not be able to write block device if it is read-only at
block level (e.g force_ro attribute). This is ensured in the regular
fops write operation (blkdev_write_iter) but not when writing via
user mapping (mmap), allowing user to actually write a read-only
block device via a PROT_WRITE mapping.
Example: This can lead to integrity issue of eMMC boot partition
(e.g mmcblk0boot0) which is read-only by default.
To fix this issue, simply deny shared writable mapping if the block
is readonly.
Note: Block remains writable if switch to read-only is performed
after the initial mapping, but this is expected behavior according
to commit a32e236eb9 ("Partially revert "block: fail op_is_write()
requests to read-only partitions"")'.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230510074223.991297-1-loic.poulain@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
amdgpu:
- update gfx11 clock counter logic
- Fix a race when disabling gfxoff on gfx10/11 for profiling
- Raven/Raven2/PCO clock counter fix
- Add missing get_vbios_fb_size for GMC 11
- Fix a spurious irq warning in the device remove case
- Fix possible power mode mismatch between driver and PMFW
- USB4 fix
exynos:
- fix build warning
i915:
- fix missing NULL check in HDCP code
msm:
- display:
- msm8998: fix fetch and qos to align with downstream
- msm8998: fix LM pairs to align with downstream
- remove unused INTF0 interrupt mask on some chipsets
- remove TE2 block from relevant chipsets
- relocate non-MDP_TOP offset to different header
- fix some indentation
- fix register offets/masks for dither blocks
- make ping-ping block length 0
- remove duplicated defines
- fix log mask for writeback block
- unregister the hdmi codec for dp during unbind
- fix yaml warnings
- gpu:
- fix submit error path leak
- arm-smmu-qcom fix for regression that broke per-process page tables
- fix no-iommu crash
-----BEGIN PGP SIGNATURE-----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=gMUV
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2023-05-20' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Regular fixes pull, amdgpu and msm make up most of these, nothing too
serious, also one i915 and one exynos.
I didn't get a misc fixes pull this week (one of the maintainers is
off, so have to engage the backup) so I think there are a few
outstanding patches that will show up next week,
amdgpu:
- update gfx11 clock counter logic
- Fix a race when disabling gfxoff on gfx10/11 for profiling
- Raven/Raven2/PCO clock counter fix
- Add missing get_vbios_fb_size for GMC 11
- Fix a spurious irq warning in the device remove case
- Fix possible power mode mismatch between driver and PMFW
- USB4 fix
exynos:
- fix build warning
i915:
- fix missing NULL check in HDCP code
msm:
- display:
- msm8998: fix fetch and qos to align with downstream
- msm8998: fix LM pairs to align with downstream
- remove unused INTF0 interrupt mask on some chipsets
- remove TE2 block from relevant chipsets
- relocate non-MDP_TOP offset to different header
- fix some indentation
- fix register offets/masks for dither blocks
- make ping-ping block length 0
- remove duplicated defines
- fix log mask for writeback block
- unregister the hdmi codec for dp during unbind
- fix yaml warnings
- gpu:
- fix submit error path leak
- arm-smmu-qcom fix for regression that broke per-process page
tables
- fix no-iommu crash"
* tag 'drm-fixes-2023-05-20' of git://anongit.freedesktop.org/drm/drm: (29 commits)
drm/amd/display: enable dpia validate
drm/amd/pm: fix possible power mode mismatch between driver and PMFW
drm/amdgpu: skip disabling fence driver src_irqs when device is unplugged
drm/amdgpu/gmc11: implement get_vbios_fb_size()
drm/amdgpu: Differentiate between Raven2 and Raven/Picasso according to revision id
drm/amdgpu/gfx11: Adjust gfxoff before powergating on gfx11 as well
drm/amdgpu/gfx10: Disable gfxoff before disabling powergating.
drm/amdgpu/gfx11: update gpu_clock_counter logic
drm/msm: Be more shouty if per-process pgtables aren't working
iommu/arm-smmu-qcom: Fix missing adreno_smmu's
drm/i915/hdcp: Check if media_gt exists
drm/exynos: fix g2d_open/close helper function definitions
drm/msm: Fix submit error-path leaks
drm/msm/iommu: Fix null pointer dereference in no-IOMMU case
dt-bindings: display/msm: dsi-controller-main: Document qcom, master-dsi and qcom, sync-dual-dsi
drm/msm/dpu: Remove duplicate register defines from INTF
drm/msm/dpu: Set PINGPONG block length to zero for DPU >= 7.0.0
drm/msm/dpu: Use V2 DITHER PINGPONG sub-block in SM8[34]50/SC8280XP
drm/msm/dpu: Fix PP_BLK_DIPHER -> DITHER typo
drm/msm/dpu: Reindent REV_7xxx interrupt masks with tabs
...
Formatting a thin-provisioned (ESE) device that is part of a PPRC copy
relation might fail with the following error:
dasd-eckd 0.0.f500: An error occurred in the DASD device driver, reason=09
[...]
24 Byte: 0 MSG 4, no MSGb to SYSOP
During format of an ESE disk the Release Allocated Space command is used.
A bit in the payload of the command is set that is not allowed to be set
for devices in a copy relation. This bit is set to allow the partial
release of an extent.
Check for the existence of a copy relation before setting the respective
bit.
Fixes: 91dc4a1975 ("s390/dasd: Add new ioctl to release space")
Cc: stable@kernel.org # 5.3+
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Link: https://lore.kernel.org/r/20230519102340.3854819-2-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Six small fixes. Four in drivers and the two core changes should be
read together as a correction to a prior iorequest_cnt fix that
exposed us to a potential use after free.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZGfmkyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishfE1AQDpZPzr
nE9y8n9yALulFS0XLDgPElY+tPspbq7W6VhKjQEAoeXWFX/9ar0Qeg3OOev1B6vn
sVXkWgmCWfq+M5v9qog=
=3/aP
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Six small fixes.
Four in drivers and the two core changes should be read together as a
correction to a prior iorequest_cnt fix that exposed us to a potential
use after free"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: core: Decrease scsi_device's iorequest_cnt if dispatch failed
scsi: Revert "scsi: core: Do not increase scsi_device's iorequest_cnt if dispatch failed"
scsi: storvsc: Don't pass unused PFNs to Hyper-V host
scsi: ufs: core: Fix MCQ nr_hw_queues
scsi: ufs: core: Rename symbol sizeof_utp_transfer_cmd_desc()
scsi: ufs: core: Fix MCQ tag calculation
goes back to 2017 (marked for stable) and a fixup to quieten a static
checker.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAmRnnmQTHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi+UGB/9b2jo9bvRJXm3Z9baTyCYGCLmpOMYB
gUDAHY9iTZBWdxbk+YppCWyh20oXz1082DV6vMn2FBhFgv4um/7GXesoVMGin73n
5w3YB8nBW0LeFsuuLMp+tnWnsIbYxEdVmNSe5lNZX16UVRW+GUBJeLPeiJrB2YCE
NuCWw4SUxRDKU1cCHWIBjIz0qJmvbW+8U7f0OwPqk1e5QmoE9Fs44sfJ9aBX4ap7
nlPWsoNX0fRixKNcsueBHLr4xEqYG0qqyvCiZnz3r59Zlcs2HwcfixBfNnJPjDeu
3ijPm+mYjAT8Vg2mVwf2fCXAtdXlzX9+ULHZDp2VoD/0LB+E5ep08HAO
=Vixp
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-6.4-rc3' of https://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"A workaround for a just discovered bug in MClientSnap encoding which
goes back to 2017 (marked for stable) and a fixup to quieten a static
checker"
* tag 'ceph-for-6.4-rc3' of https://github.com/ceph/ceph-client:
ceph: force updating the msg pointer in non-split case
ceph: silence smatch warning in reconnect_caps_cb()
- Get rid of a warning message printed by the ACPI cpufreq driver
after recent changes in it when anohter CPU performance scaling
driver is registered already when it starts (Petr Pavlu).
- Make cpupower read TSC on each CPU right before reading MPERF so as
to reduce the potential time difference between the TSC and MPERF
accesses and improve the C0 percentage calculation (Wyes Karny).
- Fix a possible file handle leak and clean up the code in the
sysfs_get_enabled() function in cpupower (Hao Zeng).
-----BEGIN PGP SIGNATURE-----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=w8ox
-----END PGP SIGNATURE-----
Merge tag 'pm-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix two issues in the cpupower utility and get rid of a spurious
warning message printed to the kernel log by the ACPI cpufreq driver
after recent changes.
Specifics:
- Get rid of a warning message printed by the ACPI cpufreq driver
after recent changes in it when anohter CPU performance scaling
driver is registered already when it starts (Petr Pavlu)
- Make cpupower read TSC on each CPU right before reading MPERF so as
to reduce the potential time difference between the TSC and MPERF
accesses and improve the C0 percentage calculation (Wyes Karny)
- Fix a possible file handle leak and clean up the code in the
sysfs_get_enabled() function in cpupower (Hao Zeng)"
* tag 'pm-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: ACPI: Prevent a warning when another frequency driver is loaded
cpupower: Make TSC read per CPU for Mperf monitor
cpupower:Fix resource leaks in sysfs_get_enabled()
Add an ACPI IRQ override quirk for LG UltraPC 17U70P so as to
make the internal keyboard work on that machine (Rubén Gómez).
-----BEGIN PGP SIGNATURE-----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=y8h3
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Add an ACPI IRQ override quirk for LG UltraPC 17U70P so as to make the
internal keyboard work on that machine (Rubén Gómez)"
* tag 'acpi-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: resource: Add IRQ override quirk for LG UltraPC 17U70P
-----BEGIN PGP SIGNATURE-----
iQFCBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmRnhlAPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YGBkH+Od05zp058WjofcWmBWJUuTFc4nUMt/Atqeq
f06Y2WdiEFTyEgo9O/6hQFfuOYZBp5VcPlgBGGNPSU4JKmcWayf+ZWiVcEO1CmqN
deahkKun84ZscFj1m65r6v6o5yqgPALlFK7QCjLv5sqF8lS06QbTr0EYasjHf0Zk
9wwrCZadATv0zH5MLQoNSKBBjOznzp75IRvN0x8UYAkR413tX6lA0mCalURK7S+j
lMmb5HVY9+Gl9z4gY01ICIfAHNX39TOHzcltn7MxHcac8vCujbjhp/GJ1ZY83aRv
smleLpFi/L8pUdE4vYybATCifcuLVu0w7rxPoOVkCgt6EHkBcw==
=XC85
-----END PGP SIGNATURE-----
Merge tag 'docs-6.4-fixes' of git://git.lwn.net/linux
Pull documentation fixes from Jonathan Corbet:
"Four straightforward documentation fixes"
* tag 'docs-6.4-fixes' of git://git.lwn.net/linux:
Documentation/filesystems: ramfs-rootfs-initramfs: use :Author:
Documentation/filesystems: sharedsubtree: add section headings
docs: quickly-build-trimmed-linux: various small fixes and improvements
Documentation: use capitalization for chapters and acronyms
- Add check whether the required facilities are installed
before using the s390-specific ChaCha20 implementation.
- Key blobs for s390 protected key interface IOCTLs commands
PKEY_VERIFYKEY2 and PKEY_VERIFYKEY3 may contain clear key
material. Zeroize copies of these keys in kernel memory
after creating protected keys.
- Set CONFIG_INIT_STACK_NONE=y in defconfigs to avoid extra
overhead of initializing all stack variables by default.
- Make sure that when a new channel-path is enabled all
subchannels are evaluated: with and without any devices
connected on it.
- When SMT thread CPUs are added to CPU topology masks the
nr_cpu_ids limit is not checked and could be exceeded.
Respect the nr_cpu_ids limit and avoid a warning when
CONFIG_DEBUG_PER_CPU_MAPS is set.
- The pointer to IPL Parameter Information Block is stored
in the absolute lowcore as a virtual address. Save it as
the physical address for later use by dump tools.
- Fix a Queued Direct I/O (QDIO) problem on z/VM guests using
QIOASSIST with dedicated (pass through) QDIO-based devices
such as FCP, real OSA or HiperSockets.
- s390's struct statfs and struct statfs64 contain padding,
which field-by-field copying does not set. Initialize the
respective structures with zeros before filling them and
copying to userspace.
- Grow s390 compat_statfs64, statfs and statfs64 structures
f_spare array member to cover padding and simplify things.
- Remove obsolete SCHED_BOOK and SCHED_DRAWER configs.
- Remove unneeded S390_CCW_IOMMU and S390_AP_IOM configs.
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQQrtrZiYVkVzKQcYivNdxKlNrRb8AUCZGd5BRccYWdvcmRlZXZA
bGludXguaWJtLmNvbQAKCRDNdxKlNrRb8OqMAQCsdBG7eR3dp3mY8ao34dqlWt98
rDQD8oiMgCkFyn77jQEAoo3HhqWY8oTu88fl82dkF0OpGW+7zgoNHUYhH8Z0gAY=
=wtTO
-----END PGP SIGNATURE-----
Merge tag 's390-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- Add check whether the required facilities are installed before using
the s390-specific ChaCha20 implementation
- Key blobs for s390 protected key interface IOCTLs commands
PKEY_VERIFYKEY2 and PKEY_VERIFYKEY3 may contain clear key material.
Zeroize copies of these keys in kernel memory after creating
protected keys
- Set CONFIG_INIT_STACK_NONE=y in defconfigs to avoid extra overhead of
initializing all stack variables by default
- Make sure that when a new channel-path is enabled all subchannels are
evaluated: with and without any devices connected on it
- When SMT thread CPUs are added to CPU topology masks the nr_cpu_ids
limit is not checked and could be exceeded. Respect the nr_cpu_ids
limit and avoid a warning when CONFIG_DEBUG_PER_CPU_MAPS is set
- The pointer to IPL Parameter Information Block is stored in the
absolute lowcore as a virtual address. Save it as the physical
address for later use by dump tools
- Fix a Queued Direct I/O (QDIO) problem on z/VM guests using QIOASSIST
with dedicated (pass through) QDIO-based devices such as FCP, real
OSA or HiperSockets
- s390's struct statfs and struct statfs64 contain padding, which
field-by-field copying does not set. Initialize the respective
structures with zeros before filling them and copying to userspace
- Grow s390 compat_statfs64, statfs and statfs64 structures f_spare
array member to cover padding and simplify things
- Remove obsolete SCHED_BOOK and SCHED_DRAWER configs
- Remove unneeded S390_CCW_IOMMU and S390_AP_IOM configs
* tag 's390-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/iommu: get rid of S390_CCW_IOMMU and S390_AP_IOMMU
s390/Kconfig: remove obsolete configs SCHED_{BOOK,DRAWER}
s390/uapi: cover statfs padding by growing f_spare
statfs: enforce statfs[64] structure initialization
s390/qdio: fix do_sqbs() inline assembly constraint
s390/ipl: fix IPIB virtual vs physical address confusion
s390/topology: honour nr_cpu_ids when adding CPUs
s390/cio: include subchannels without devices also for evaluation
s390/defconfigs: set CONFIG_INIT_STACK_NONE=y
s390/pkey: zeroize key blobs
s390/crypto: use vector instructions only if available for ChaCha20
- Avoid erroneously marking untagged pages with PG_mte_tagged
- Always reset KASAN tags for destination page in copy_page()
- Mark PMU header functions 'static inline'
- Fix some sparse warnings due to missing casts
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmRnVj4QHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNJdMB/94LS7O5EVgx0qVg7g7D0LDs6f++eJ8Ya0V
32QSPal1KRFIBvHdyyQWdce0j+hs0mefsJ8fUTA16Jl8UrZ5U2XKzV3czvxZHjeX
AcBhw2nNVTH3vG1lXJzQLMGtgsVGXAw/DNwCgztNnlNCvyS+dpb7Gzrwv1safxni
eXs8nvyAlowzfvCWk4bNAE8ZLB4ckAAuPrzactzVJ6I397kk5i/PPUSWzG6syx3G
qPXE3XSYtlqQ/ZmGnoE/PWTGPNcieWfeQcHlIT+00tdH/FWd+rJdIb5VW0JKDtLo
Rqtpq0SfZTqg6+GdzQUbLVfOcAte3TiD7qOcA1xnT2z4IjEQGIav
=eZEU
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"A mixture of compiler/static checker resolutions and a couple of MTE
fixes:
- Avoid erroneously marking untagged pages with PG_mte_tagged
- Always reset KASAN tags for destination page in copy_page()
- Mark PMU header functions 'static inline'
- Fix some sparse warnings due to missing casts"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: mte: Do not set PG_mte_tagged if tags were not initialized
arm64: Also reset KASAN tag if page is not PG_mte_tagged
arm64: perf: Mark all accessor functions inline
ARM: perf: Mark all accessor functions inline
arm64: vdso: Pass (void *) to virt_to_page()
arm64/mm: mark private VM_FAULT_X defines as vm_fault_t
In kvm_vm_ioctl_create_vcpu(), add vcpu to vcpu_array iff it's safe to
access vcpu via kvm_get_vcpu() and kvm_for_each_vcpu(), i.e. when there's
no failure path requiring vcpu removal and destruction. Such order is
important because vcpu_array accessors may end up referencing vcpu at
vcpu_array[0] even before online_vcpus is set to 1.
When online_vcpus=0, any call to kvm_get_vcpu() goes through
array_index_nospec() and ends with an attempt to xa_load(vcpu_array, 0):
int num_vcpus = atomic_read(&kvm->online_vcpus);
i = array_index_nospec(i, num_vcpus);
return xa_load(&kvm->vcpu_array, i);
Similarly, when online_vcpus=0, a kvm_for_each_vcpu() does not iterate over
an "empty" range, but actually [0, ULONG_MAX]:
xa_for_each_range(&kvm->vcpu_array, idx, vcpup, 0, \
(atomic_read(&kvm->online_vcpus) - 1))
In both cases, such online_vcpus=0 edge case, even if leading to
unnecessary calls to XArray API, should not be an issue; requesting
unpopulated indexes/ranges is handled by xa_load() and xa_for_each_range().
However, this means that when the first vCPU is created and inserted in
vcpu_array *and* before online_vcpus is incremented, code calling
kvm_get_vcpu()/kvm_for_each_vcpu() already has access to that first vCPU.
This should not pose a problem assuming that once a vcpu is stored in
vcpu_array, it will remain there, but that's not the case:
kvm_vm_ioctl_create_vcpu() first inserts to vcpu_array, then requests a
file descriptor. If create_vcpu_fd() fails, newly inserted vcpu is removed
from the vcpu_array, then destroyed:
vcpu->vcpu_idx = atomic_read(&kvm->online_vcpus);
r = xa_insert(&kvm->vcpu_array, vcpu->vcpu_idx, vcpu, GFP_KERNEL_ACCOUNT);
kvm_get_kvm(kvm);
r = create_vcpu_fd(vcpu);
if (r < 0) {
xa_erase(&kvm->vcpu_array, vcpu->vcpu_idx);
kvm_put_kvm_no_destroy(kvm);
goto unlock_vcpu_destroy;
}
atomic_inc(&kvm->online_vcpus);
This results in a possible race condition when a reference to a vcpu is
acquired (via kvm_get_vcpu() or kvm_for_each_vcpu()) moments before said
vcpu is destroyed.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Message-Id: <20230510140410.1093987-2-mhal@rbox.co>
Cc: stable@vger.kernel.org
Fixes: c5b0775491 ("KVM: Convert the kvm->vcpus array to a xarray", 2021-12-08)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Include a definition of WARN_ON_ONCE() before using it.
Fixes: bb1fcc70d9 ("KVM: nVMX: Allow L1 to use 5-level page walks for nested EPT")
Cc: Sean Christopherson <seanjc@google.com>
Signed-off-by: Jacob Xu <jacobhxu@google.com>
[reworded commit message; changed <asm/bug.h> to <linux/bug.h>]
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220225012959.1554168-1-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reject hardware enabling, i.e. VM creation, if a restart/shutdown has
been initiated to avoid re-enabling hardware between kvm_reboot() and
machine_{halt,power_off,restart}(). The restart case is especially
problematic (for x86) as enabling VMX (or clearing GIF in KVM_RUN on
SVM) blocks INIT, which results in the restart/reboot hanging as BIOS
is unable to wake and rendezvous with APs.
Note, this bug, and the original issue that motivated the addition of
kvm_reboot(), is effectively limited to a forced reboot, e.g. `reboot -f`.
In a "normal" reboot, userspace will gracefully teardown userspace before
triggering the kernel reboot (modulo bugs, errors, etc), i.e. any process
that might do ioctl(KVM_CREATE_VM) is long gone.
Fixes: 8e1c18157d ("KVM: VMX: Disable VMX when system shutdown")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Message-Id: <20230512233127.804012-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
