Now it's the turn to drop the global hlpe_state variable. It can be
gracefully embedded in hdmi_lpe_audio_ctx struct.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Instead of referring to the global hlpe_pdev variable, pass the
platform device object to each function properly. Accessing to the
global object is really ugly and error-prone.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Registering the irq handler at the too early place may cause a system
stall because the irq handler may be triggered before the other
initializations. Move the irq handler registration to the later point.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently the driver calls the event callback stored in its ctx
pointer, but it's obviously inefficient. Replace it with the direct
calls.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
had_mutex is (supposedly) used to protect the concurrent calls of
hdmi_audio_probe(). But we may have only one device at most, so it's
utterly useless. Drop it.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The error from hdmi_audio_probe() wasn't handled properly, and it may
leave some resources leaked or mapped. Fix it and also clean up the
error paths.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For reducing the global variable reference, keep snd_intelhad object
in the context and pass it to each helper. It's a preliminary change
for further cleanup.
This also includes the simplification of the probe procedure: the LPE
platform driver directly gets the created snd_intelhad object by
hdmi_audio_probe(), and passes it to each helper and destructor,
hdmi_audio_remove(). The hdmi_audio_probe() function doesn't call the
back-registration any longer, which is fairly useless. The LPE
platform driver initializes the stuff instead at the right place, and
calls the wq after the object creation in the probe function itself.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Yet another indirection is killed: at this time, it's
snd_intel_had_interface. It contains also the name string, but it's
nowhere used, thus we can kill it, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Like the previous patch, this replaces the indirect query_ops calls
via direct function calls. They are only get_caps and set_caps, so
fairly straightforward at this time.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now about the indirect register ops: they are replaced with direct
calls, too.
The read / write / modify ops are simply replaced with the
corresponding functions. The difference is that we calculate the
offset inside the function now. So all the had_config_offset
references in the caller side are dropped. This also simplifies the
DP-audio check in hdmi_audio_write() and hdmi_audio_rmw().
The hdmi_audio_get_register_base is dropped since it's no longer used
when the base address and config offset are referred in the read/write
functions.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We have only a single implementation of had_ops, hence there is no
merit to use the indirect calls at all. Let's replace it with the
direct calls -- which allows the compiler more optimizations.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The v1 code refers to Medfield/Clovertrail. It's not used at all in
the current driver, and probably won't be ever. Let's clean this up,
then we can go to the next stage of cleanup tasks.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Theoretically setting the state to SNDRV_PCM_STATE_DISCONNECTED is
correct. But, unfortunately, PA gets confused by this action, and it
won't re-probe the device after HDMI/DP is re-plugged. (It reprobes
only when the card itself is recreated.)
As a workaround, set SNDRV_PCM_STATE_SETUP instead.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This allows the LPE HDMI driver to clean up its global variable
reference.
Also drop to pass the eld pointer because the connection status and
the ELD bytes can be retrieved from the attached pdata.
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now the pipe that is being used is passed over i915 notification, we
can re-setup the relevant register offset depending on pipe assignments
during hotplug.
This allows playback on single port machines such Zotac Pi330 or
dual-port machines such as Dell Wyse 3040 box
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Imported from legacy patches
Note: the new code doesn't assume a modified ELD but
an explicit notification that DP is present. It appears
that the i915 code does change the ELD so we could use
the ELD-based tests to check for DP audio
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When the display resolution changes, the drm disables the
display pipes due to which audio rendering stops. At this
time, we need to ensure the existing audio pointers and
buffers are cleared out so that the playback can restarted
once the display pipe is enabled with a different N/CTS values
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Jerome Anand <jerome.anand@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Hdmi audio driver based on the child platform device
created by gfx driver is implemented.
This audio driver is derived from legacy intel
hdmi audio driver.
The interfaces for interaction between gfx and audio
are updated and the driver implementation updated to
derive interrupts in its own address space based on
irq chip framework
The changes to calculate sub-period positions was triggered
by David Henningsson <david.henningsson@canonical.com> and is
accomodated in this patch
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Jerome Anand <jerome.anand@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On Baytrail and Cherrytrail, HDaudio may be fused out or disabled
by the BIOS. This driver enables an alternate path to the i915
display registers and DMA.
Although there is no hardware path between i915 display and LPE/SST
audio clusters, this HDMI capability is referred to in the documentation
as "HDMI LPE Audio" so we keep the name for consistency. There is no
hardware path or control dependencies with the LPE/SST DSP functionality.
The hdmi-lpe-audio driver will be probed when the i915 driver creates
a child platform device.
Since this driver is neither SoC nor PCI, a new x86 folder is added
Additional indirections in the code will be cleaned up in the next series
to aid smoother DP integration
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Jerome Anand <jerome.anand@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
