Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-15 08:31:55 +00:00
Code Issues Packages Projects Releases Wiki Activity
1,294,488 Commits 7 Branches 861 Tags 6.6 GiB
04c9068114
Commit Graph

18116 Commits

Author SHA1 Message Date
Jared McArthur
04c9068114 arm64: dts: ti: k3-j722s: Fix gpio-range for main_pmx0 
Commit 5e5c50964e ("arm64: dts: ti: k3-j722s: Add gpio-ranges
properties") introduced pinmux range definition for gpio-ranges, however
missed a hole within gpio-range for main_pmx0. As a result, automatic
mapping of GPIO to pin control for gpios within the main_pmx0 domain is
broken. Fix this by correcting the gpio-range.

Fixes: 5e5c50964e ("arm64: dts: ti: k3-j722s: Add gpio-ranges properties")
Signed-off-by: Jared McArthur <j-mcarthur@ti.com>
Link: https://lore.kernel.org/r/20240801210414.715306-4-j-mcarthur@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
 2024-08-05 14:22:00 -05:00
Jared McArthur
98897a3008 arm64: dts: ti: k3-am62p: Fix gpio-range for main_pmx0 
Commit d72d73a44c ("arm64: dts: ti: k3-am62p: Add gpio-ranges
properties") introduced pinmux range definition for gpio-ranges, however
missed a hole within gpio-range for main_pmx0. As a result, automatic
mapping of GPIO to pin control for gpios within the main_pmx0 domain is
broken. Fix this by correcting the gpio-range.

Fixes: d72d73a44c ("arm64: dts: ti: k3-am62p: Add gpio-ranges properties")
Signed-off-by: Jared McArthur <j-mcarthur@ti.com>
Link: https://lore.kernel.org/r/20240801210414.715306-3-j-mcarthur@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
 2024-08-05 14:22:00 -05:00
Jared McArthur
4e436f6fb9 arm64: dts: ti: k3-am62p: Add gpio-ranges for mcu_gpio0 
Commit d72d73a44c ("arm64: dts: ti: k3-am62p: Add gpio-ranges
properties") introduced pinmux range definition for gpio-ranges, however
missed introducing the range description for the mcu_gpio node. As a
result, automatic mapping of GPIO to pin control for mcu gpios is
broken. Fix this by introducing the proper ranges.

Fixes: d72d73a44c ("arm64: dts: ti: k3-am62p: Add gpio-ranges properties")
Signed-off-by: Jared McArthur <j-mcarthur@ti.com>
Link: https://lore.kernel.org/r/20240801210414.715306-2-j-mcarthur@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
 2024-08-05 14:22:00 -05:00
Francesco Dolcini
9438f97029 arm64: dts: ti: k3-am62-verdin-dahlia: Keep CTRL_SLEEP_MOCI# regulator on 
This reverts commit 3935fbc87d.

CTRL_SLEEP_MOCI# is a signal that is defined for all the SoM
implementing the Verdin family specification, this signal is supposed to
control the power enable in the carrier board when the system is in deep
sleep mode. However this is not possible with Texas Instruments AM62
SoC, IOs output buffer is disabled in deep sleep and IOs are in
tri-state mode.

Given that we cannot properly control this pin, force it to be always
high to minimize potential issues.

Fixes: 3935fbc87d ("arm64: dts: ti: k3-am62-verdin-dahlia: support sleep-moci")
Cc:  <stable@vger.kernel.org>
Link: https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1361669/am625-gpio-output-state-in-deep-sleep/5244802
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20240731054804.6061-1-francesco@dolcini.it
Signed-off-by: Nishanth Menon <nm@ti.com>
 2024-08-05 08:57:11 -05:00
Nishanth Menon
137d9e76ae Late fixes towards v6.11-rc1 
First patch fixes warning splat seen on J784S4 due to overlapping
 serdes0 lane. Second patch cleans up the serdes0 references for readability
 -----BEGIN PGP SIGNATURE-----
 
 iQFEBAABCAAuFiEEyRC2zAhGcGjrhiNExEYeRXyRFuMFAmaVYl4QHHZpZ25lc2hy
 QHRpLmNvbQAKCRDERh5FfJEW48GRCAC5u0MKtI+/BZZVlqmgtL0glWYcFBUKxAFU
 iRTKIJAEsfR42R6vGFolujtfvb2RDLxgUFhpt8A5X5SiVWk3DC/txAMgIkaFsndu
 FeHCgwr6jLtZ2Cg3iiD3+/NxEHQ3GKA/CJZYJwAM8ED8UWKENA0JkTwz5H47D+OF
 Ijc/MyM/HNp2LbfdGN23hcK4Vw2BGZFtRJUkjWNNZcvwG6d66a/3Z/sSOlAL9rB3
 a1ypEX2X71O3I7Fdp25v4ukbW8+E+pVEpXQEg8tf8fkPYuRZqUMxbWzHrPAvx6u6
 RM+V7iQIxr61rwL31OWDlPnweSUv6cUQH3aADQOok16Chvt/u37N
 =thvO
 -----END PGP SIGNATURE-----

Merge tag 'ti-k3-dt-for-v6.11-part2' into ti-k3-dts-next

Late fixes towards v6.11-rc1

First patch fixes warning splat seen on J784S4 due to overlapping
serdes0 lane. Second patch cleans up the serdes0 references for readability

Signed-off-by: Nishanth Menon <nm@ti.com>
 2024-07-29 06:36:54 -05:00
Linus Torvalds
ca83c61cb3 Kbuild updates for v6.11 
- Remove tristate choice support from Kconfig
 
  - Stop using the PROVIDE() directive in the linker script
 
  - Reduce the number of links for the combination of CONFIG_DEBUG_INFO_BTF
    and CONFIG_KALLSYMS
 
  - Enable the warning for symbol reference to .exit.* sections by default
 
  - Fix warnings in RPM package builds
 
  - Improve scripts/make_fit.py to generate a FIT image with separate base
    DTB and overlays
 
  - Improve choice value calculation in Kconfig
 
  - Fix conditional prompt behavior in choice in Kconfig
 
  - Remove support for the uncommon EMAIL environment variable in Debian
    package builds
 
  - Remove support for the uncommon "name <email>" form for the DEBEMAIL
    environment variable
 
  - Raise the minimum supported GNU Make version to 4.0
 
  - Remove stale code for the absolute kallsyms
 
  - Move header files commonly used for host programs to scripts/include/
 
  - Introduce the pacman-pkg target to generate a pacman package used in
    Arch Linux
 
  - Clean up Kconfig
 -----BEGIN PGP SIGNATURE-----
 
 iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAmagBLUVHG1hc2FoaXJv
 eUBrZXJuZWwub3JnAAoJED2LAQed4NsGmoUQAJ8pnURs0g+Rcyk6bdY/qtXBYkS+
 nXpIK1ssFgRRgAQdeszYtvBqLFzb0wRCSie87G1AriD/JkVVTjCCY1For1y+vs0u
 a7HfxitHhZpPyZW/T+WMQ3LViNccpkx+DFAcoRH8xOY/XPEJKVUby332jOIXMuyg
 +NKIELQJVsLhcDofTUGb5VfIQektw219n5c4jKjXdNk4ZtE24xCRM5X528ZebwWJ
 RZhMvJ968PyIH1IRXvNt6dsKBxoGIwPP8IO6yW9hzHaNsBqt7MGSChSel7r1VKpk
 iwCNApJvEiVBe5wvTSVOVro7/8p/AZ70CQAqnMJV+dNnRqtGqW7NvL6XAjZRJgJJ
 Uxe5NSrXgQd3FtqfcbXLetBgp9zGVt328nHm1HXHR5rFsvoOiTvO7hHPbhA+OoWJ
 fs+jHzEXdAMRgsNrczPWU5Svq6MgGe4v8HBf0m8N1Uy65t/O+z9ti2QAw7kIFlbu
 /VSFNjw4CHmNxGhnH0khCMsy85FwVIt9Ux+2d6IEc0gP8S1Qa1HgHGAoVI4U51eS
 9dxEPVJNPOugaIVHheuS3wimEO6wzaJcQHn4IXaasMA7P6Yo4G/jiGoy4cb9qPTM
 Hb+GaOltUy7vDoG4D2LSym8zR8rdKwbIf/5psdZrq/IWVKq5p+p7KWs3aOykSoM7
 o6Hb532Ioalhm8je
 =BYu7
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild updates from Masahiro Yamada:

 - Remove tristate choice support from Kconfig

 - Stop using the PROVIDE() directive in the linker script

 - Reduce the number of links for the combination of CONFIG_KALLSYMS and
   CONFIG_DEBUG_INFO_BTF

 - Enable the warning for symbol reference to .exit.* sections by
   default

 - Fix warnings in RPM package builds

 - Improve scripts/make_fit.py to generate a FIT image with separate
   base DTB and overlays

 - Improve choice value calculation in Kconfig

 - Fix conditional prompt behavior in choice in Kconfig

 - Remove support for the uncommon EMAIL environment variable in Debian
   package builds

 - Remove support for the uncommon "name <email>" form for the DEBEMAIL
   environment variable

 - Raise the minimum supported GNU Make version to 4.0

 - Remove stale code for the absolute kallsyms

 - Move header files commonly used for host programs to scripts/include/

 - Introduce the pacman-pkg target to generate a pacman package used in
   Arch Linux

 - Clean up Kconfig

* tag 'kbuild-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (65 commits)
  kbuild: doc: gcc to CC change
  kallsyms: change sym_entry::percpu_absolute to bool type
  kallsyms: unify seq and start_pos fields of struct sym_entry
  kallsyms: add more original symbol type/name in comment lines
  kallsyms: use \t instead of a tab in printf()
  kallsyms: avoid repeated calculation of array size for markers
  kbuild: add script and target to generate pacman package
  modpost: use generic macros for hash table implementation
  kbuild: move some helper headers from scripts/kconfig/ to scripts/include/
  Makefile: add comment to discourage tools/* addition for kernel builds
  kbuild: clean up scripts/remove-stale-files
  kconfig: recursive checks drop file/lineno
  kbuild: rpm-pkg: introduce a simple changelog section for kernel.spec
  kallsyms: get rid of code for absolute kallsyms
  kbuild: Create INSTALL_PATH directory if it does not exist
  kbuild: Abort make on install failures
  kconfig: remove 'e1' and 'e2' macros from expression deduplication
  kconfig: remove SYMBOL_CHOICEVAL flag
  kconfig: add const qualifiers to several function arguments
  kconfig: call expr_eliminate_yn() at least once in expr_eliminate_dups()
  ...
 2024-07-23 14:32:21 -07:00
Zhang Bingwu
af7925d820 kbuild: Abort make on install failures 
Setting '-e' flag tells shells to exit with error exit code immediately
after any of commands fails, and causes make(1) to regard recipes as
failed.

Before this, make will still continue to succeed even after the
installation failed, for example, for insufficient permission or
directory does not exist.

Signed-off-by: Zhang Bingwu <xtexchooser@duck.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
 2024-07-20 13:34:54 +09:00
Linus Torvalds
04d17331ca USB/Thunderbolt updates for 6.11-rc1 
Here is the big set of USB and Thunderbolt changes for 6.11-rc1.
 Nothing earth-shattering in here, just constant forward progress in
 adding support for new hardware and better debugging functionalities for
 thunderbolt devices and the subsystem.  Included in here are:
   - thunderbolt debugging update and driver additions
   - xhci driver updates
   - typec driver updates
   - kselftest device driver changes (acked by the relevant maintainers,
     depended on other changes in this tree.)
   - cdns3 driver updates
   - gadget driver updates
   - MODULE_DESCRIPTION() additions
   - dwc3 driver updates and fixes
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZppaNA8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ylXZwCgrEtIAQw0x6EF7w/iTWVS5UJj9AEAoLCj5UwO
 WX978uThyUctuYYKbw+8
 =Cm7j
 -----END PGP SIGNATURE-----

Merge tag 'usb-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB / Thunderbolt updates from Greg KH:
 "Here is the big set of USB and Thunderbolt changes for 6.11-rc1.

  Nothing earth-shattering in here, just constant forward progress in
  adding support for new hardware and better debugging functionalities
  for thunderbolt devices and the subsystem. Included in here are:

   - thunderbolt debugging update and driver additions

   - xhci driver updates

   - typec driver updates

   - kselftest device driver changes (acked by the relevant maintainers,
     depended on other changes in this tree.)

   - cdns3 driver updates

   - gadget driver updates

   - MODULE_DESCRIPTION() additions

   - dwc3 driver updates and fixes

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (112 commits)
  kselftest: devices: Add test to detect device error logs
  kselftest: Move ksft helper module to common directory
  kselftest: devices: Move discoverable devices test to subdirectory
  usb: gadget: f_uac2: fix non-newline-terminated function name
  USB: uas: Implement the new shutdown callback
  USB: core: add 'shutdown' callback to usb_driver
  usb: typec: Drop explicit initialization of struct i2c_device_id::driver_data to 0
  usb: dwc3: enable CCI support for AMD-xilinx DWC3 controller
  usb: dwc2: add support for other Lantiq SoCs
  usb: gadget: Use u16 types for 16-bit fields
  usb: gadget: midi2: Fix incorrect default MIDI2 protocol setup
  usb: dwc3: core: Check all ports when set phy suspend
  usb: typec: tcpci: add support to set connector orientation
  dt-bindings: usb: Convert fsl-usb to yaml
  usb: typec: ucsi: reorder operations in ucsi_run_command()
  usb: typec: ucsi: extract common code for command handling
  usb: typec: ucsi: inline ucsi_read_message_in
  usb: typec: ucsi: rework command execution functions
  usb: typec: ucsi: split read operation
  usb: typec: ucsi: simplify command sending API
  ...
 2024-07-19 15:37:48 -07:00
Linus Torvalds
ebcfbf02ab IOMMU Updates for Linux v6.11 
- Core:
   * Support for the "ats-supported" device-tree property.
 
   * Removal of the 'ops' field from 'struct iommu_fwspec'.
 
   * Introduction of iommu_paging_domain_alloc() and partial conversion
     of existing users.
 
   * Introduce 'struct iommu_attach_handle' and provide corresponding
     IOMMU interfaces which will be used by the IOMMUFD subsystem.
 
   * Remove stale documentation.
 
   * Add missing MODULE_DESCRIPTION() macro.
 
   * Misc cleanups.
 
 - Allwinner Sun50i:
   * Ensure bypass mode is disabled on H616 SoCs.
 
   * Ensure page-tables are allocated below 4GiB for the 32-bit
     page-table walker.
 
   * Add new device-tree compatible strings.
 
 - AMD Vi:
   * Use try_cmpxchg64() instead of cmpxchg64() when updating pte.
 
 - Arm SMMUv2:
   * Print much more useful information on context faults.
 
   * Fix Qualcomm TBU probing when CONFIG_ARM_SMMU_QCOM_DEBUG=n.
 
   * Add new Qualcomm device-tree bindings.
 
 - Arm SMMUv3:
   * Support for hardware update of access/dirty bits and reporting via
     IOMMUFD.
 
   * More driver rework from Jason, this time updating the PASID/SVA support
     to prepare for full IOMMUFD support.
 
   * Add missing MODULE_DESCRIPTION() macro.
 
   * Minor fixes and cleanups.
 
 - NVIDIA Tegra:
 
   * Fix for benign fwspec initialisation issue exposed by rework on the
     core branch.
 
 - Intel VT-d:
 
   * Use try_cmpxchg64() instead of cmpxchg64() when updating pte.
 
   * Use READ_ONCE() to read volatile descriptor status.
 
   * Remove support for handling Execute-Requested requests.
 
   * Avoid calling iommu_domain_alloc().
 
   * Minor fixes and refactoring.
 
 - Qualcomm MSM:
 
   * Updates to the device-tree bindings.
 -----BEGIN PGP SIGNATURE-----
 
 iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmaZTqMQHHdpbGxAa2Vy
 bmVsLm9yZwAKCRC3rHDchMFjNApdB/wL2gW7ANJN3KDrOiWdq06P9fuzxbuiAegI
 aKGH+aT05kJjLBXpAE5K9Bas0RbgN8iIB4TITDR9jyLnMOlTP3poy0fvB8y27q00
 /WkQ7yVPkZc58ySdEOGH/EbuQkiXcD1YTjTGWP9071xzbWTDbsYN0smfbvvB9LgI
 56KhdcUtB0QsqhqBzyyznHJLFdpVvDpbkiAFDXJfor7SNOOtV9a4Ect6IYteaYKz
 S6+DWDEfUs+fHTEKEZ9sZVA745f2zPkT/YHY8vjLOEukWN07+3/2AKTra19DIgqF
 HCGitRyZjOut1fg8sLn0SUliCKe/G/bHlwSbHnxJQ73b91YDvpzD
 =xvLD
 -----END PGP SIGNATURE-----

Merge tag 'iommu-updates-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux

Pull iommu updates from Will Deacon:
 "Core:

   - Support for the "ats-supported" device-tree property

   - Removal of the 'ops' field from 'struct iommu_fwspec'

   - Introduction of iommu_paging_domain_alloc() and partial conversion
     of existing users

   - Introduce 'struct iommu_attach_handle' and provide corresponding
     IOMMU interfaces which will be used by the IOMMUFD subsystem

   - Remove stale documentation

   - Add missing MODULE_DESCRIPTION() macro

   - Misc cleanups

  Allwinner Sun50i:

   - Ensure bypass mode is disabled on H616 SoCs

   - Ensure page-tables are allocated below 4GiB for the 32-bit
     page-table walker

   - Add new device-tree compatible strings

  AMD Vi:

   - Use try_cmpxchg64() instead of cmpxchg64() when updating pte

  Arm SMMUv2:

   - Print much more useful information on context faults

   - Fix Qualcomm TBU probing when CONFIG_ARM_SMMU_QCOM_DEBUG=n

   - Add new Qualcomm device-tree bindings

  Arm SMMUv3:

   - Support for hardware update of access/dirty bits and reporting via
     IOMMUFD

   - More driver rework from Jason, this time updating the PASID/SVA
     support to prepare for full IOMMUFD support

   - Add missing MODULE_DESCRIPTION() macro

   - Minor fixes and cleanups

  NVIDIA Tegra:

   - Fix for benign fwspec initialisation issue exposed by rework on the
     core branch

  Intel VT-d:

   - Use try_cmpxchg64() instead of cmpxchg64() when updating pte

   - Use READ_ONCE() to read volatile descriptor status

   - Remove support for handling Execute-Requested requests

   - Avoid calling iommu_domain_alloc()

   - Minor fixes and refactoring

  Qualcomm MSM:

   - Updates to the device-tree bindings"

* tag 'iommu-updates-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (72 commits)
  iommu/tegra-smmu: Pass correct fwnode to iommu_fwspec_init()
  iommu/vt-d: Fix identity map bounds in si_domain_init()
  iommu: Move IOMMU_DIRTY_NO_CLEAR define
  dt-bindings: iommu: Convert msm,iommu-v0 to yaml
  iommu/vt-d: Fix aligned pages in calculate_psi_aligned_address()
  iommu/vt-d: Limit max address mask to MAX_AGAW_PFN_WIDTH
  docs: iommu: Remove outdated Documentation/userspace-api/iommu.rst
  arm64: dts: fvp: Enable PCIe ATS for Base RevC FVP
  iommu/of: Support ats-supported device-tree property
  dt-bindings: PCI: generic: Add ats-supported property
  iommu: Remove iommu_fwspec ops
  OF: Simplify of_iommu_configure()
  ACPI: Retire acpi_iommu_fwspec_ops()
  iommu: Resolve fwspec ops automatically
  iommu/mediatek-v1: Clean up redundant fwspec checks
  RDMA/usnic: Use iommu_paging_domain_alloc()
  wifi: ath11k: Use iommu_paging_domain_alloc()
  wifi: ath10k: Use iommu_paging_domain_alloc()
  drm/msm: Use iommu_paging_domain_alloc()
  vhost-vdpa: Use iommu_paging_domain_alloc()
  ...
 2024-07-19 09:59:58 -07:00
Linus Torvalds
51835949dd Networking changes for 6.11. Not much excitement - a handful of large 
patchsets (devmem among them) did not make it in time.
 
 Core & protocols
 ----------------
 
  - Use local_lock in addition to local_bh_disable() to protect per-CPU
    resources in networking, a step closer for local_bh_disable() not
    to act as a big lock on PREEMPT_RT.
 
  - Use flex array for netdevice priv area, ensure its cache alignment.
 
  - Add a sysctl knob to allow user to specify a default rto_min at socket
    init time. Bit of a big hammer but multiple companies were
    independently carrying such patch downstream so clearly it's useful.
 
  - Support scheduling transmission of packets based on CLOCK_TAI.
 
  - Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned off
    using cpusets.
 
  - Support multiple L2TPv3 UDP tunnels using the same 5-tuple address.
 
  - Allow configuration of multipath hash seed, to both allow synchronizing
    hashing of two routers, and preventing partial accidental sync.
 
  - Improve TCP compliance with RFC 9293 for simultaneous connect().
 
  - Support sending NAT keepalives in IPsec ESP in UDP states. Userspace
    IKE daemon had to do this before, but the kernel can better keep
    track of it.
 
  - Support sending supervision HSR frames with MAC addresses stored in
    ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled.
 
  - Introduce IPPROTO_SMC for selecting SMC when socket is created.
 
  - Allow UDP GSO transmit from devices with no checksum offload.
 
  - openvswitch: add packet sampling via psample, separating the sampled
    traffic from "upcall" packets sent to user space for forwarding.
 
  - nf_tables: shrink memory consumption for transaction objects.
 
 Things we sprinkled into general kernel code
 --------------------------------------------
 
  - Power Sequencing subsystem (used by Qualcomm Bluetooth driver
    for QCA6390).
 
  - Add IRQ information in sysfs for auxiliary bus.
 
  - Introduce guard definition for local_lock.
 
  - Add aligned flavor of __cacheline_group_{begin, end}() markings for
    grouping fields in structures.
 
 BPF
 ---
 
  - Notify user space (via epoll) when a struct_ops object is getting
    detached/unregistered.
 
  - Add new kfuncs for a generic, open-coded bits iterator.
 
  - Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
    bpf_list_head.
 
  - Support resilient split BTF which cuts down on duplication and makes
    BTF as compact as possible WRT BTF from modules.
 
  - Add support for dumping kfunc prototypes from BTF which enables both
    detecting as well as dumping compilable prototypes for kfuncs.
 
  - riscv64 BPF JIT improvements in particular to add 12-argument support
    for BPF trampolines and to utilize bpf_prog_pack for the latter.
 
  - Add the capability to offload the netfilter flowtable in XDP layer
    through kfuncs.
 
 Driver API
 ----------
 
  - Allow users to configure IRQ tresholds between which automatic IRQ
    moderation can choose.
 
  - Expand Power Sourcing (PoE) status with power, class and failure
    reason. Support setting power limits.
 
  - Track additional RSS contexts in the core, make sure configuration
    changes don't break them.
 
  - Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated ESP
    data paths.
 
  - Support updating firmware on SFP modules.
 
 Tests and tooling
 -----------------
 
  - mptcp: use net/lib.sh to manage netns.
 
  - TCP-AO and TCP-MD5: replace debug prints used by tests with
    tracepoints.
 
  - openvswitch: make test self-contained (don't depend on OvS CLI tools).
 
 Drivers
 -------
 
  - Ethernet high-speed NICs:
    - Broadcom (bnxt):
      - increase the max total outstanding PTP TX packets to 4
      - add timestamping statistics support
      - implement netdev_queue_mgmt_ops
      - support new RSS context API
    - Intel (100G, ice, idpf):
      - implement FEC statistics and dumping signal quality indicators
      - support E825C products (with 56Gbps PHYs)
    - nVidia/Mellanox:
      - support HW-GRO
      - mlx4/mlx5: support per-queue statistics via netlink
      - obey the max number of EQs setting in sub-functions
    - AMD/Solarflare:
      - support new RSS context API
    - AMD/Pensando:
      - ionic: rework fix for doorbell miss to lower overhead
        and skip it on new HW
    - Wangxun:
      - txgbe: support Flow Director perfect filters
 
  - Ethernet NICs consumer, embedded and virtual:
    - Add driver for Tehuti Networks TN40xx chips
    - Add driver for Meta's internal NIC chips
    - Add driver for Ethernet MAC on Airoha EN7581 SoCs
    - Add driver for Renesas Ethernet-TSN devices
    - Google cloud vNIC:
      - flow steering support
    - Microsoft vNIC:
      - support page sizes other than 4KB on ARM64
    - vmware vNIC:
      - support latency measurement (update to version 9)
    - VirtIO net:
      - support for Byte Queue Limits
      - support configuring thresholds for automatic IRQ moderation
      - support for AF_XDP Rx zero-copy
    - Synopsys (stmmac):
      - support for STM32MP13 SoC
      - let platforms select the right PCS implementation
    - TI:
      - icssg-prueth: add multicast filtering support
      - icssg-prueth: enable PTP timestamping and PPS
    - Renesas:
      - ravb: improve Rx performance 30-400% by using page pool,
        theaded NAPI and timer-based IRQ coalescing
      - ravb: add MII support for R-Car V4M
    - Cadence (macb):
      - macb: add ARP support to Wake-On-LAN
    - Cortina:
      - use phylib for RX and TX pause configuration
 
  - Ethernet switches:
    - nVidia/Mellanox:
      - support configuration of multipath hash seed
      - report more accurate max MTU
      - use page_pool to improve Rx performance
    - MediaTek:
      - mt7530: add support for bridge port isolation
    - Qualcomm:
      - qca8k: add support for bridge port isolation
    - Microchip:
      - lan9371/2: add 100BaseTX PHY support
    - NXP:
      - vsc73xx: implement VLAN operations
 
  - Ethernet PHYs:
    - aquantia: enable support for aqr115c
    - aquantia: add support for PHY LEDs
    - realtek: add support for rtl8224 2.5Gbps PHY
    - xpcs: add memory-mapped device support
    - add BroadR-Reach link mode and support in Broadcom's PHY driver
 
  - CAN:
    - add document for ISO 15765-2 protocol support
    - mcp251xfd: workaround for erratum DS80000789E, use timestamps
      to catch when device returns incorrect FIFO status
 
  - WiFi:
    - mac80211/cfg80211:
      - parse Transmit Power Envelope (TPE) data in mac80211 instead of
        in drivers
      - improvements for 6 GHz regulatory flexibility
      - multi-link improvements
      - support multiple radios per wiphy
      - remove DEAUTH_NEED_MGD_TX_PREP flag
    - Intel (iwlwifi):
      - bump FW API to 91 for BZ/SC devices
      - report 64-bit radiotap timestamp
      - enable P2P low latency by default
      - handle Transmit Power Envelope (TPE) advertised by AP
      - remove support for older FW for new devices
      - fast resume (keeping the device configured)
      - mvm: re-enable Multi-Link Operation (MLO)
      - aggregation (A-MSDU) optimizations
    - MediaTek (mt76):
      - mt7925 Multi-Link Operation (MLO) support
    - Qualcomm (ath10k):
      - LED support for various chipsets
    - Qualcomm (ath12k):
      - remove unsupported Tx monitor handling
      - support channel 2 in 6 GHz band
      - support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
      - supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
        Advertisements (EMA)
      - support dynamic VLAN
      - add panic handler for resetting the firmware state
      - DebugFS support for datapath statistics
      - WCN7850: support for Wake on WLAN
    - Microchip (wilc1000):
      - read MAC address during probe to make it visible to user space
      - suspend/resume improvements
    - TI (wl18xx):
      - support newer firmware versions
    - RealTek (rtw89):
      - preparation for RTL8852BE-VT support
      - Wake on WLAN support for WiFi 6 chips
      - 36-bit PCI DMA support
    - RealTek (rtlwifi):
      - RTL8192DU support
    - Broadcom (brcmfmac):
      - Management Frame Protection support (to enable WPA3)
 
  - Bluetooth:
    - qualcomm: use the power sequencer for QCA6390
    - btusb: mediatek: add ISO data transmission functions
    - hci_bcm4377: add BCM4388 support
    - btintel: add support for BlazarU core
    - btintel: add support for Whale Peak2
    - btnxpuart: add support for AW693 A1 chipset
    - btnxpuart: add support for IW615 chipset
    - btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591
 
 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmaWjBwACgkQMUZtbf5S
 IrvuSRAAkJuEzTRqgURBCe4eNEQde6mJJig7l2CKHwCbFiHZpRkFHf8qKbcGWbL6
 uLW33SWnKtJVDhxVKWHLq635XW7BAa80YhqGw21GDi+mIEhWXZglHj3xbXNxsMfE
 4eg/kG4BkfYWFmHaXOwVWV/mr7nXf6j7WmXNeXEi32ufE1j0OL+YlQenKnMj8yP2
 j9JmYa2Chwppng1SblHmcjmGkdNVwFhStKeCG+2K7v06wdDH/QYBlbgUv9gw/cxp
 NlW//wgiaeX40U4O3kDwt9C+LDoh+0VrDDeVdQ+IsScLtY3PhAzEoKolFYTq2HSr
 I1JpoaHNnyNsJq3DZrACQ5WlH4yDn6C2EUB6dxNnFaI9F1ZPsi+7MTl6Sei1AklD
 TuQTj/lxOACBwW2Q77NU72uoxiIUauesGPHcnrAFuoCIEhZF0mso7k59BvrXhsOP
 QwcLbQdc1YHNkqv/Vc7NBY+ruMsYB+5Ubbhhj2p27dp/CWFIwxI29fze4dn2uhO6
 ejHN3mbqwPdSzg12YJtM6Iq61Cnwo2eVSvhTxl+ZVSZtI4nu2arzR+y7QTYmNrXP
 6tkgVN9UsWeLl2xJ8wyyqL5mcvNHP2rPXWZ2X56iTaa26m+UlleeQ7YRaYtQAAr0
 Ec/vlDMX64SwHhd+qwE99DXGQf2g+KklHKSLsnajJUVrWFTlRI0=
 =opz8
 -----END PGP SIGNATURE-----

Merge tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Not much excitement - a handful of large patchsets (devmem among them)
  did not make it in time.

  Core & protocols:

   - Use local_lock in addition to local_bh_disable() to protect per-CPU
     resources in networking, a step closer for local_bh_disable() not
     to act as a big lock on PREEMPT_RT

   - Use flex array for netdevice priv area, ensure its cache alignment

   - Add a sysctl knob to allow user to specify a default rto_min at
     socket init time. Bit of a big hammer but multiple companies were
     independently carrying such patch downstream so clearly it's useful

   - Support scheduling transmission of packets based on CLOCK_TAI

   - Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned
     off using cpusets

   - Support multiple L2TPv3 UDP tunnels using the same 5-tuple address

   - Allow configuration of multipath hash seed, to both allow
     synchronizing hashing of two routers, and preventing partial
     accidental sync

   - Improve TCP compliance with RFC 9293 for simultaneous connect()

   - Support sending NAT keepalives in IPsec ESP in UDP states.
     Userspace IKE daemon had to do this before, but the kernel can
     better keep track of it

   - Support sending supervision HSR frames with MAC addresses stored in
     ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled

   - Introduce IPPROTO_SMC for selecting SMC when socket is created

   - Allow UDP GSO transmit from devices with no checksum offload

   - openvswitch: add packet sampling via psample, separating the
     sampled traffic from "upcall" packets sent to user space for
     forwarding

   - nf_tables: shrink memory consumption for transaction objects

  Things we sprinkled into general kernel code:

   - Power Sequencing subsystem (used by Qualcomm Bluetooth driver for
     QCA6390)           [ Already merged separately - Linus ]

   - Add IRQ information in sysfs for auxiliary bus

   - Introduce guard definition for local_lock

   - Add aligned flavor of __cacheline_group_{begin, end}() markings for
     grouping fields in structures

  BPF:

   - Notify user space (via epoll) when a struct_ops object is getting
     detached/unregistered

   - Add new kfuncs for a generic, open-coded bits iterator

   - Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
     bpf_list_head

   - Support resilient split BTF which cuts down on duplication and
     makes BTF as compact as possible WRT BTF from modules

   - Add support for dumping kfunc prototypes from BTF which enables
     both detecting as well as dumping compilable prototypes for kfuncs

   - riscv64 BPF JIT improvements in particular to add 12-argument
     support for BPF trampolines and to utilize bpf_prog_pack for the
     latter

   - Add the capability to offload the netfilter flowtable in XDP layer
     through kfuncs

  Driver API:

   - Allow users to configure IRQ tresholds between which automatic IRQ
     moderation can choose

   - Expand Power Sourcing (PoE) status with power, class and failure
     reason. Support setting power limits

   - Track additional RSS contexts in the core, make sure configuration
     changes don't break them

   - Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated
     ESP data paths

   - Support updating firmware on SFP modules

  Tests and tooling:

   - mptcp: use net/lib.sh to manage netns

   - TCP-AO and TCP-MD5: replace debug prints used by tests with
     tracepoints

   - openvswitch: make test self-contained (don't depend on OvS CLI
     tools)

  Drivers:

   - Ethernet high-speed NICs:
      - Broadcom (bnxt):
         - increase the max total outstanding PTP TX packets to 4
         - add timestamping statistics support
         - implement netdev_queue_mgmt_ops
         - support new RSS context API
      - Intel (100G, ice, idpf):
         - implement FEC statistics and dumping signal quality indicators
         - support E825C products (with 56Gbps PHYs)
      - nVidia/Mellanox:
         - support HW-GRO
         - mlx4/mlx5: support per-queue statistics via netlink
         - obey the max number of EQs setting in sub-functions
      - AMD/Solarflare:
         - support new RSS context API
      - AMD/Pensando:
         - ionic: rework fix for doorbell miss to lower overhead and
           skip it on new HW
      - Wangxun:
         - txgbe: support Flow Director perfect filters

   - Ethernet NICs consumer, embedded and virtual:
      - Add driver for Tehuti Networks TN40xx chips
      - Add driver for Meta's internal NIC chips
      - Add driver for Ethernet MAC on Airoha EN7581 SoCs
      - Add driver for Renesas Ethernet-TSN devices
      - Google cloud vNIC:
         - flow steering support
      - Microsoft vNIC:
         - support page sizes other than 4KB on ARM64
      - vmware vNIC:
         - support latency measurement (update to version 9)
      - VirtIO net:
         - support for Byte Queue Limits
         - support configuring thresholds for automatic IRQ moderation
         - support for AF_XDP Rx zero-copy
      - Synopsys (stmmac):
         - support for STM32MP13 SoC
         - let platforms select the right PCS implementation
      - TI:
         - icssg-prueth: add multicast filtering support
         - icssg-prueth: enable PTP timestamping and PPS
      - Renesas:
         - ravb: improve Rx performance 30-400% by using page pool,
           theaded NAPI and timer-based IRQ coalescing
         - ravb: add MII support for R-Car V4M
      - Cadence (macb):
         - macb: add ARP support to Wake-On-LAN
      - Cortina:
         - use phylib for RX and TX pause configuration

   - Ethernet switches:
      - nVidia/Mellanox:
         - support configuration of multipath hash seed
         - report more accurate max MTU
         - use page_pool to improve Rx performance
      - MediaTek:
         - mt7530: add support for bridge port isolation
      - Qualcomm:
         - qca8k: add support for bridge port isolation
      - Microchip:
         - lan9371/2: add 100BaseTX PHY support
      - NXP:
         - vsc73xx: implement VLAN operations

   - Ethernet PHYs:
      - aquantia: enable support for aqr115c
      - aquantia: add support for PHY LEDs
      - realtek: add support for rtl8224 2.5Gbps PHY
      - xpcs: add memory-mapped device support
      - add BroadR-Reach link mode and support in Broadcom's PHY driver

   - CAN:
      - add document for ISO 15765-2 protocol support
      - mcp251xfd: workaround for erratum DS80000789E, use timestamps to
        catch when device returns incorrect FIFO status

   - WiFi:
      - mac80211/cfg80211:
         - parse Transmit Power Envelope (TPE) data in mac80211 instead
           of in drivers
         - improvements for 6 GHz regulatory flexibility
         - multi-link improvements
         - support multiple radios per wiphy
         - remove DEAUTH_NEED_MGD_TX_PREP flag
      - Intel (iwlwifi):
         - bump FW API to 91 for BZ/SC devices
         - report 64-bit radiotap timestamp
         - enable P2P low latency by default
         - handle Transmit Power Envelope (TPE) advertised by AP
         - remove support for older FW for new devices
         - fast resume (keeping the device configured)
         - mvm: re-enable Multi-Link Operation (MLO)
         - aggregation (A-MSDU) optimizations
      - MediaTek (mt76):
         - mt7925 Multi-Link Operation (MLO) support
      - Qualcomm (ath10k):
         - LED support for various chipsets
      - Qualcomm (ath12k):
         - remove unsupported Tx monitor handling
         - support channel 2 in 6 GHz band
         - support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
         - supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
           Advertisements (EMA)
         - support dynamic VLAN
         - add panic handler for resetting the firmware state
         - DebugFS support for datapath statistics
         - WCN7850: support for Wake on WLAN
      - Microchip (wilc1000):
         - read MAC address during probe to make it visible to user space
         - suspend/resume improvements
      - TI (wl18xx):
         - support newer firmware versions
      - RealTek (rtw89):
         - preparation for RTL8852BE-VT support
         - Wake on WLAN support for WiFi 6 chips
         - 36-bit PCI DMA support
      - RealTek (rtlwifi):
         - RTL8192DU support
      - Broadcom (brcmfmac):
         - Management Frame Protection support (to enable WPA3)

   - Bluetooth:
      - qualcomm: use the power sequencer for QCA6390
      - btusb: mediatek: add ISO data transmission functions
      - hci_bcm4377: add BCM4388 support
      - btintel: add support for BlazarU core
      - btintel: add support for Whale Peak2
      - btnxpuart: add support for AW693 A1 chipset
      - btnxpuart: add support for IW615 chipset
      - btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591"

* tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1589 commits)
  eth: fbnic: Fix spelling mistake "tiggerring" -> "triggering"
  tcp: Replace strncpy() with strscpy()
  wifi: ath12k: fix build vs old compiler
  tcp: Don't access uninit tcp_rsk(req)->ao_keyid in tcp_create_openreq_child().
  eth: fbnic: Write the TCAM tables used for RSS control and Rx to host
  eth: fbnic: Add L2 address programming
  eth: fbnic: Add basic Rx handling
  eth: fbnic: Add basic Tx handling
  eth: fbnic: Add link detection
  eth: fbnic: Add initial messaging to notify FW of our presence
  eth: fbnic: Implement Rx queue alloc/start/stop/free
  eth: fbnic: Implement Tx queue alloc/start/stop/free
  eth: fbnic: Allocate a netdevice and napi vectors with queues
  eth: fbnic: Add FW communication mechanism
  eth: fbnic: Add message parsing for FW messages
  eth: fbnic: Add register init to set PCIe/Ethernet device config
  eth: fbnic: Allocate core device specific structures and devlink interface
  eth: fbnic: Add scaffolding for Meta's NIC driver
  PCI: Add Meta Platforms vendor ID
  net/sched: cls_flower: propagate tca[TCA_OPTIONS] to NL_REQ_ATTR_CHECK
  ...
 2024-07-16 19:28:34 -07:00
Linus Torvalds
e3950967f6 soc: dt updates for 6.11 
The devicetree updates are fairly well spread out across platforms,
 with Qualcomm making up about a third of the total.
 
 There are three new SoCs in existing product families this:
 
  - NXP i.MX95 is a variant of i.MX93, now with six Cortex-A55 cores
    instead of just two as well as a GPU and more high-speed I/O
    devices.
 
  - Qualcomm QCS8550 is a variant of SM8550 for IOT devices
 
  - Airoha EN7581 is a 10G-PON network chip and related to
    the MT7981 Wireless router chip from its parent Mediatek.
 
 In total there are 58 new machines, including four riscv
 boards and eight for 32-bit arm.
 
 The most exciting new addition is probably a pair of laptops
 based on the Qualcomm x1e80100 (Snapdragon X1 Elite) chip,
 the Asus Vivobook S15 and the Lenovo Yoga Slim7x.
 
 Other noteworthy new additions are:
 
  - A total of 20 Qualcomm based machines, mostly Android devices
    from Samsung, Motorola and LG, as well as a wireless router
    and some reference designs
 
  - Six NXP i.MX based machines, mostly industrial boards along
    with some reference designs
 
  - Mediatek sees some interesting Filogic based routers
    including the "OpenWRT One", a few new Chromebooks as
    well as single-board computers.
 
  - Four machines from Solidrun based on Marvell cn913x,
    replacing the older Armada 8000 based counterparts
 
  - The four Amlogic machines are all set top boxes or reference
    designs for them
 
  - The nine new Rockchips machines are mostly single-board
    computers including some interesting ones based on the
    rk3588 chip like the ROCK 5 ITX board and the CM3588
    with its four NVMe slots
 
  - The RISC-V boards are all single-board computers based on
    Starfive JH7110, Microchip MPFS and Allwinner D1, which all
    had similar boards already
 
 There are also a lot of updates to already supported machines,
 notably for the TI K3, Rockchips, Freescale and of course
 Qualcomm platforms.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmaVTSYACgkQYKtH/8kJ
 UidZrQ/9GKrfiZ9xJ/7Vvh/jtF5uObsoVuEC2ZFNXY4q6x6KV8BxuHV6LVHgWVaS
 3+Mp5ER1N+h13cB8aDNQ9lq/TYfINQrAGFPMWK2Ytkg57klqeCblfSiKuQxIfdmG
 SH146R3NPe6lqEZ9yv8KWr1GS8kkkVFgzcOBD2BPwx77elazBvG4Ff5rd3Nizua2
 aAcrO2tKHMOJz4eUOJNvrDppwBZUARwPlScBx+QrJWUIDvjRafGvmwSp80FEQorz
 k258DeBzn3JiHUtvE5MLsaBC1WNghV5WTujEI+SLd5T0XohSr5Y8oisSnn/9fAn4
 CCji0eeeqG/KfIWzEGvs7AKmym1oW1OpdbLRN601YSNxLS7mLE5gEySjFXR3dYje
 IxbYzDV9A8qst/znk+uR6be8YB9r7r+aYi4IlE4lg9xWripTOPNuCx/5tdfa2Ge6
 +fBs4WBz+t0Xba19VjonaP+6HsEPqC2LP0/D44QMktG7QRrYbqILX66Mg/jgPccM
 f167D9WGcWUwoKH2nDZ+m1oXQj0UkSge40gBOFRtGfdCsV77TssmGeq0OeDDSA9K
 bIQgaDVwZuYXr9kyNoYIqziU0JA+mhALLiaAVaMLS8+VcNXRZKscv3fs+yFgCGFy
 aDkqWw6j2M3/O93+t4j4He/KNglquA81DBT8ZZPV1KJ4flTQIk0=
 =xGqj
 -----END PGP SIGNATURE-----

Merge tag 'soc-dt-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC dt updates from Arnd Bergmann:
 "The devicetree updates are fairly well spread out across platforms,
  with Qualcomm making up about a third of the total.

  There are three new SoCs in existing product families this:

   - NXP i.MX95 is a variant of i.MX93, now with six Cortex-A55 cores
     instead of just two as well as a GPU and more high-speed I/O
     devices.

   - Qualcomm QCS8550 is a variant of SM8550 for IOT devices

   - Airoha EN7581 is a 10G-PON network chip and related to the MT7981
     Wireless router chip from its parent Mediatek.

  In total there are 58 new machines, including four riscv boards and
  eight for 32-bit arm.

  The most exciting new addition is probably a pair of laptops based on
  the Qualcomm x1e80100 (Snapdragon X1 Elite) chip, the Asus Vivobook
  S15 and the Lenovo Yoga Slim7x.

  Other noteworthy new additions are:

   - A total of 20 Qualcomm based machines, mostly Android devices from
     Samsung, Motorola and LG, as well as a wireless router and some
     reference designs

   - Six NXP i.MX based machines, mostly industrial boards along with
     some reference designs

   - Mediatek sees some interesting Filogic based routers including the
     "OpenWRT One", a few new Chromebooks as well as single-board
     computers.

   - Four machines from Solidrun based on Marvell cn913x, replacing the
     older Armada 8000 based counterparts

   - The four Amlogic machines are all set top boxes or reference
     designs for them

   - The nine new Rockchips machines are mostly single-board computers
     including some interesting ones based on the rk3588 chip like the
     ROCK 5 ITX board and the CM3588 with its four NVMe slots

   - The RISC-V boards are all single-board computers based on Starfive
     JH7110, Microchip MPFS and Allwinner D1, which all had similar
     boards already

  There are also a lot of updates to already supported machines, notably
  for the TI K3, Rockchips, Freescale and of course Qualcomm platforms"

* tag 'soc-dt-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (846 commits)
  arm64: dts: allwinner: h616: add crypto engine node
  riscv: dts: add clock generator for Sophgo SG2042 SoC
  arm64: dts: rockchip: Add Xunlong Orange Pi 3B
  dt-bindings: arm: rockchip: Add Xunlong Orange Pi 3B
  arm64: dts: rockchip: Add Radxa ROCK 3B
  dt-bindings: arm: rockchip: Add Radxa ROCK 3B
  mailmap: Update Luca Weiss's email address
  ARM: dts: ixp4xx: nslu2: beeper uses PWM
  arm64: dts: rockchip: add ROCK 5 ITX board
  dt-bindings: arm: rockchip: Add ROCK 5 ITX board
  arm64: dts: rockchip: Add dma-names to uart1 on Pine64 rk3566 devices
  arm64: dts: rockchip: Add avdd supplies to hdmi on rock64
  arm64: dts: qcom: msm8916-lg-c50: add initial dts for LG Leon LTE
  arm64: dts: qcom: msm8916-lg-m216: Add initial device tree
  dt-bindings: arm: qcom: Add msm8916 based LG devices
  ARM: dts: qcom: msm8960: correct memory base
  arm64: dts: qcom: ipq9574: Add icc provider ability to gcc
  dt-bindings: interconnect: Add Qualcomm IPQ9574 support
  arm64: dts: qcom: sm8150: Add video clock controller node
  arm64: dts: qcom: pm6150: Add vibrator
  ...
 2024-07-16 11:43:51 -07:00
Linus Torvalds
cc0f7c3f97 soc: driver updates for 6.11 
The updates to the mediatek, allwinner, ti, tegra, microchip, stm32,
 samsung, imx, zynq and amlogic platoforms are farily small maintenance
 changes, either addressing minor mistakes or enabling additional hardware.
 
 The qualcomm platform changes add a number of features and are larger
 than the other ones combined, introducing the use of linux/cleanup.h
 across several drivers, adding support for Snapdragon X1E and other
 SoCs in platform drivers, a new "protection domain mapper" driver, and a
 "shared memory bridge" driver.
 
 The cznic "turris omnia" router based on Marvell Armada gets a platform
 driver that talks to the board specific microcontroller.
 
 The reset and cache subsystems get a few minor updates to SoC specific
 drivers, while the ff-a, scmi and optee firmware drivers get some
 code refactoring and new features.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmaVTTUACgkQYKtH/8kJ
 UiegixAAqGfwUtwk2GGZJlEGjUjT4cqrwCTLhNlaNfgN/dZxjk1XBTKvtp2mVDi2
 lJN8TNqa0Csw8XZYPgHi0s1ppmwQl07Unpbc9tUeS4tAeIuputDe+ia0UtQx3Mkd
 GTAKJO6VzLeCnDxB4757OURZO9wYlPdZycQbnSKDyfBIapFuZwozmbAc7BuFGvBv
 2Zt5lca531EJuM5wg25f+F/8XSxZIqjMA6/PTGNCYig1bx5AM2tCWK2xN+BL+dxn
 YVLuRZT7lSgpwivg9OHzJ49g9WeJB7RArnSDg1Ac7sNfC8476UC17BAH4rF7QSTP
 q2GBP2VOdRJA9mJkavtLhE/1LPDJuYTM+nt1xq7jzG2MKN7yLjX0LMrMgKsk0pXZ
 T2qQh7+4MA9lwlpGEwDruMajTJahbMgiAUcSivLsr18LrifAnKVHBDTRmRwNiRX2
 T3/zk90kenJX1NOkc4SrdLd5iCyq0oSN+fukdh3UMgJLnAzaWOe5mKAMF7eefeog
 rMH276W8JwbbmIC4R2aQm6TL7IWBtaCaHuLqYOiTjooir31OgwW4Mztd7okU4v4I
 rOGhV0zJTSVXT+a4O2jOooWppS9xE45/F2DSigSvZjEiahZ0L4feaOrHui5PVVlW
 wmFmobCq6Y0Mjspdk64O1tbUWJ17CmRK1WDrUUk0VgmLy9gn6A8=
 =ChcR
 -----END PGP SIGNATURE-----

Merge tag 'soc-drivers-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC driver updates from Arnd Bergmann:
 "The updates to the mediatek, allwinner, ti, tegra, microchip, stm32,
  samsung, imx, zynq and amlogic platoforms are fairly small maintenance
  changes, either addressing minor mistakes or enabling additional
  hardware.

  The qualcomm platform changes add a number of features and are larger
  than the other ones combined, introducing the use of linux/cleanup.h
  across several drivers, adding support for Snapdragon X1E and other
  SoCs in platform drivers, a new "protection domain mapper" driver, and
  a "shared memory bridge" driver.

  The cznic "turris omnia" router based on Marvell Armada gets a
  platform driver that talks to the board specific microcontroller.

  The reset and cache subsystems get a few minor updates to SoC specific
  drivers, while the ff-a, scmi and optee firmware drivers get some code
  refactoring and new features"

* tag 'soc-drivers-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (122 commits)
  firmware: turris-mox-rwtm: Initialize completion before mailbox
  firmware: turris-mox-rwtm: Fix checking return value of wait_for_completion_timeout()
  firmware: turris-mox-rwtm: Do not complete if there are no waiters
  MAINTAINERS: drop riscv list from cache controllers
  platform: cznic: turris-omnia-mcu: fix Kconfig dependencies
  bus: sunxi-rsb: Constify struct regmap_bus
  soc: sunxi: sram: Constify struct regmap_config
  platform: cznic: turris-omnia-mcu: Depend on WATCHDOG
  platform: cznic: turris-omnia-mcu: Depend on OF
  soc: samsung: exynos-pmu: add support for PMU_ALIVE non atomic registers
  arm64: stm32: enable scmi regulator for stm32
  firmware: qcom: tzmem: blacklist more platforms for SHM Bridge
  soc: qcom: wcnss: simplify with cleanup.h
  soc: qcom: pdr: simplify with cleanup.h
  soc: qcom: ocmem: simplify with cleanup.h
  soc: qcom: mdt_loader: simplify with cleanup.h
  soc: qcom: llcc: simplify with cleanup.h
  firmware: qcom: tzmem: simplify returning pointer without cleanup
  soc: qcom: socinfo: Add PM6350 PMIC
  arm64: dts: renesas: rz-smarc: Replace fixed regulator for USB VBUS
  ...
 2024-07-16 11:35:27 -07:00
Jakub Kicinski
e5abd12f3d Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 
Cross-merge networking fixes after downstream PR.

Conflicts:

drivers/net/ethernet/broadcom/bnxt/bnxt.c
  f7ce5eb2cb ("bnxt_en: Fix crash in bnxt_get_max_rss_ctx_ring()")
  20c8ad72eb ("eth: bnxt: use the RSS context XArray instead of the local list")

Adjacent changes:

net/ethtool/ioctl.c
  503757c809 ("net: ethtool: Fix RSS setting")
  eac9122f0c ("net: ethtool: record custom RSS contexts in the XArray")

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 2024-07-12 22:20:30 -07:00
Andrew Halaney
cc5049007d arm64: dts: ti: k3-j784s4-evm: Consolidate serdes0 references 
Subnodes were added to serdes0 in two different spots (due to independent
development of their consumer usage). Let's go ahead and combine those
into one reference for readability's sake.

Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://lore.kernel.org/r/20240710-k3-j784s4-evm-serdes0-cleanup-v1-2-03850fe33922@redhat.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
 2024-07-12 17:08:40 +05:30
Andrew Halaney
84f78178b6 arm64: dts: ti: k3-j784s4-evm: Assign only lanes 0 and 1 to PCIe1 
Currently PCIe1 is setup to use SERDES0 lanes 0 thru 3, and USB0 is
setup to use SERDES0 lane 3 as well.

This overlap in lanes causes the following reset related lane splat:

    [    4.846266] WARNING: CPU: 4 PID: 308 at drivers/reset/core.c:792 __reset_control_get_internal+0x128/0x160
    ...
    [    4.846405] Call trace:
    [    4.846407]  __reset_control_get_internal+0x128/0x160
    [    4.846413]  __of_reset_control_get+0x4e0/0x528
    [    4.846418]  of_reset_control_array_get+0xa4/0x1f8
    [    4.846423]  cdns_torrent_phy_probe+0xbc8/0x1068 [phy_cadence_torrent]
    [    4.846445]  platform_probe+0xb4/0xe8
    ...
    [    4.846577] cdns-torrent-phy 5060000.serdes: phy@0: failed to get reset

Let's limit the PCIe1 SERDES0 lanes to 0 and 1 to avoid overlap here.
This works since PCIe1 operates in x2 mode and doesn't need 4 SERDES0
lanes.

Fixes: 27ce26fe52 ("arm64: dts: ti: k3-j784s4-evm: Enable PCIe0 and PCIe1 in RC Mode")
Suggested-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://lore.kernel.org/r/20240710-k3-j784s4-evm-serdes0-cleanup-v1-1-03850fe33922@redhat.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
 2024-07-12 17:08:40 +05:30
Arnd Bergmann
48d2245586 Allwinner SoC device tree changes for 6.11 part 2 
One additional peripheral enabled for the H616.
 
 - H616 crypto engine added
 -----BEGIN PGP SIGNATURE-----
 
 iQJCBAABCgAsFiEE2nN1m/hhnkhOWjtHOJpUIZwPJDAFAmaOvwcOHHdlbnNAY3Np
 ZS5vcmcACgkQOJpUIZwPJDCRuxAApCCnXFDAo5Itnkbq0dJLx9apL8spyjsIIys3
 VkpMKWrexc2TOhxvxN6yf9JnqZp4LnyaleTYhdAjN3xE/gNr9bLTuSaMTnjifmzO
 bT2E392LwTMeNNd+5SO/PnvumbsVfATL44OIa510qzI/KSBO1cDZFHPuxV7wTVpk
 SLfAXVLmvcdJDRN4Zye9y0gzHgNnUwmGkoXTMROEXI2om7Q/hz5Ag2GgxVslTz7o
 KlPOsl4F3dCLguXDQZhamU4UA1pLEwIo6fVyn5XuR0gtNhr8g+i0qb1y4VziMKdp
 BwjaUjzjgmoeYwDXQnGwIQ1tKpQ5z6B27VRHxSq1LN1ErUA23tLGx+QbFFtda8je
 KdxElNP/uRerArk0vmZKkeklAu3i4+HpSv212IUKPWYbGvsZd4ji10heX6Rgc57V
 ei12/0jJRb91h4jMNoSFoN9lPW/kV8hhM67pLLj9iJIG/771Kx6jK8RxXKi/aIQP
 zanrlMhL97uccoQ9L37m2DDwE9aYSw7WLlFaf7PWJO6yhmzzdFWydjl5YGobpp/v
 x1jk7eW0ThSzPpRLnC8VfcOTpabMLOSKFltW3P5KNhipRHxcDvtBOPX/8H0YA4NF
 gEtWI5eLdsY3z4h8KXv8eTrfKkQOIEd50eUVpnw3JVwLPCCl8gKQWvE28PFV1WUk
 bk0kj54=
 =VCQ5
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmaO7aYACgkQYKtH/8kJ
 Uie/dA//Szb10kTv1oGM8FxU0hjiHW5ehQ64zH92VCva93ypt9rej1nlN9Wb9F9p
 BRNBOIGl4PUeM3wgWNfFjzMOQcwsKwhp6blRxdsxaTKhmYCYrOJL/IO92hOuKr6L
 Vcyi/0ZOrNkHdOT79KAPmrFaAE4z83f95wUM68vbnF05EJ5tKYN0/QjgyFhoAZJT
 P3udsxArFYxInTZ6A1rtPn6Oirxiw2BYfgmo/LgkkA4du7amk2hfLMg2A2Z/xCXf
 74OH8tWGmMAlp05yxd+mveUsU5pjBF1AnBOMj779DcsfhCmj/eHZR5mDrPpp4cfC
 lNBF7tx5JoeHRFhcIIYW1AeWkU9fSKjoo7o3l6DR9bolC+uAJoZs+3nQGyc6ux7S
 xmQgW8cN6sdKD0y7PFJyO+QPZcAjFM5LTbDtcRBuTVZNrQIb3SmY1DkzAY1QwZW5
 pt7mqOz4odWFeB/E2p93fAuRQZrChJ4+DYSkrqwhRN8PBK1ndMIyEgB7OPqqFMUG
 5xPEURY4ATFTYVteS+sqWn1HlYoc2RzKLsY1w9vvy8X0A4nFnnauW/OhPmfwvyel
 3Wbt0PqdZqUPWvD5WJ3ST44Q4O0KUFLlw3whPZYv1kcfw861YdOYoRUMCvQ9i4kG
 0NCJa4adS+jj63RsPcoy7MZAxsaZx+HWLVM9ukPOC1UO9vPjtCk=
 =4XS5
 -----END PGP SIGNATURE-----

Merge tag 'sunxi-dt-for-6.11-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt

Allwinner SoC device tree changes for 6.11 part 2

One additional peripheral enabled for the H616.

- H616 crypto engine added

* tag 'sunxi-dt-for-6.11-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  arm64: dts: allwinner: h616: add crypto engine node

Link: https://lore.kernel.org/r/Zo7O73Afx7lZcBRi@wens.tw
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2024-07-10 22:23:02 +02:00
Andre Przywara
6ed9a85f1c arm64: dts: allwinner: h616: add crypto engine node 
The Allwinner H616 SoC contains a crypto engine very similar to the H6
version, but with all base addresses in the DMA descriptors shifted by
two bits. This requires a new compatible string.
Also the H616 CE relies on the internal osciallator for the TRNG
operation, so we need to reference this clock.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20240624232110.9817-5-andre.przywara@arm.com
[wens@csie.org: fix up register range size]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
 2024-07-11 00:43:10 +08:00
Arnd Bergmann
28323a7561 A few more Arm64 DeviceTree updates for v6.11 
This introduces support for Lenovo Thinkpad Yoga slim 7x, LG Leon LTE,
 and LG K10 (K420n).
 
 In addition to this, all Gen-1 platforms gets the DWC3 quirk to disable
 "SuperSpeed in park mode", which resolves an instabliity issue seen in
 host mode.
 
 For Fairphone 4, PM6150L and PMK8003 thermal sensors are added and
 thermal zones defined.
 
 Two fastrpc contexts on SM6350 are marked as non-secure, to allow
 non-secure usage.
 
 The video clock controller on SM8150 is introduced. IPQ9574 GCC is
 marked as a interconnect provider. The vibrator block in the PM6150 is
 described.
 
 On SC7280 the download mode register is defined for SCM, allowing it to
 enable/disable the ramdump support during a system crash.
 
 Lastly, add a mailmap entry for Luca Weiss.
 -----BEGIN PGP SIGNATURE-----
 
 iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmaNjqMVHGFuZGVyc3Nv
 bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3FdNwP/jMB1vTGZcaYwVGVEYIkUeuuflSr
 xdrUShN0EzNlB7XPo2yRZakAY4ndINQssC89Z4WYvMMytf+2qWQgGNrAbWme/Nmo
 /0r7Mqly2ueSN+fCG2s80HQRuuwjhM7KJ1WZ1PN46FNYOqis1eTchzv7Mi9biDgY
 4HaVqqwNd6T6VZgIJJqV059XpmFw1RSKJdBjVD1ggn/7MMk2ueeY66iIJqSQC9KF
 zjqo5pXfwlpHJWUMATNEzfUQwqJ2vD/uR36I7qUVNq7WLZKeWjhp8pYERw1jLt76
 93wwMlTXV3vX0yin0ZviQyv+YcxNmTF6V99TZiEs8kSsQ47HgwpTVvdq5dGuKVIg
 lfe+pfrltIoJn11wmz5hFFcRRvsLzDFOs5dY8kis3i+7nTzRE57gdM5YL4H+Z1VU
 VA0Z0NImSC+l6PwOZ+QW5v78xRrdDZplj0MpKNvcNERnTXipTcp65oqZY3E+GAro
 LrYAlLI3oAlNAKYSDk3YBRDami3WrjGy8BZwxKE/VXb0ZcEPCQKMt/17njwLBrqj
 rslU5tlyeuSxebg08mSIML6N1xOOndO6Ny0FDmqsNf1MiMxPQ+0Cw22P71bnb+8W
 VPhLmmq1YOAWPH6WKq1Ng4wId7J9GcwMOkvZZsFuwNx35RNLHhKH1Or961K0+vdI
 /qKRNZjWFV6h7yBC
 =Qc/t
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmaNqgkACgkQYKtH/8kJ
 UicSKxAAkXAizZjc3PBOQMPH6AwkawwRR7hZDSS5lPLk42cjC5OiWP26q+guulJj
 SH6CYr9xftVshW9oSTlvEiI+pOp7lygaBNU76BPWmj9/cbS1pJPVBFz3BVdgCCZF
 7Zxy7J1d01yIOtDTc+gpAsozWwRLN+frGgg5SJYPKt6sgnTtk4VaulW1rpvHXDJv
 xdkSlcc34AidKODZ1rCCXrCM5Pi/lxRw8rmj4foSSEW+BZtaCSFT8SbsQ0F3XezS
 xeIan3vN7uZydazKhefIrQlJfNiZ3gvYFsYYS//lCcGY7fim3pVwfHPnEq0MkPI3
 b7YiqpGaLxUKg5pjqobo6ChvTISggbdS38gP/814IzusKIYE6xO4Ff5rEtBNtUMV
 uzS1ZLok82EOYFtL9DBz3BHdAHOGqKoU5+qW823Th+XTfKJNLxkPRZhM+JB6ChPl
 wJZDXc1YQdMrhjaP4MCZJL09b/pCfKh0ue8XJo9H7/7FtqSp6ACjvif47Rd36Yri
 wFBl/EB2qouY6hhsWASE4Ag+P5+DgtBnpybFv88O9dVx7STb5xXNzO45i+9BEDES
 HsAj+xHsNcMOW+YHhgHHZySYTYpFhvaO8AU4R6ZYgDi6Jg2VidBpvofgdzXslsKb
 e+kDNOEy4I20ci/it05lJjX2D2oxlT37ooC1aZskuUCa0vCiYzs=
 =naka
 -----END PGP SIGNATURE-----

Merge tag 'qcom-arm64-for-6.11-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt

A few more Arm64 DeviceTree updates for v6.11

This introduces support for Lenovo Thinkpad Yoga slim 7x, LG Leon LTE,
and LG K10 (K420n).

In addition to this, all Gen-1 platforms gets the DWC3 quirk to disable
"SuperSpeed in park mode", which resolves an instabliity issue seen in
host mode.

For Fairphone 4, PM6150L and PMK8003 thermal sensors are added and
thermal zones defined.

Two fastrpc contexts on SM6350 are marked as non-secure, to allow
non-secure usage.

The video clock controller on SM8150 is introduced. IPQ9574 GCC is
marked as a interconnect provider. The vibrator block in the PM6150 is
described.

On SC7280 the download mode register is defined for SCM, allowing it to
enable/disable the ramdump support during a system crash.

Lastly, add a mailmap entry for Luca Weiss.

* tag 'qcom-arm64-for-6.11-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (22 commits)
  mailmap: Update Luca Weiss's email address
  arm64: dts: qcom: msm8916-lg-c50: add initial dts for LG Leon LTE
  arm64: dts: qcom: msm8916-lg-m216: Add initial device tree
  dt-bindings: arm: qcom: Add msm8916 based LG devices
  arm64: dts: qcom: ipq9574: Add icc provider ability to gcc
  dt-bindings: interconnect: Add Qualcomm IPQ9574 support
  arm64: dts: qcom: sm8150: Add video clock controller node
  arm64: dts: qcom: pm6150: Add vibrator
  arm64: dts: qcom: sc7280: Enable download mode register write
  arm64: dts: qcom: sm7225-fairphone-fp4: Add PM6150L thermals
  arm64: dts: qcom: sm7225-fairphone-fp4: Add PMK8003 thermals
  arm64: dts: qcom: sm6350: Add missing qcom,non-secure-domain property
  arm64: dts: qcom: sdm845: Disable SS instance in Parkmode for USB
  arm64: dts: qcom: msm8996: Disable SS instance in Parkmode for USB
  arm64: dts: qcom: sm6350: Disable SS instance in Parkmode for USB
  arm64: dts: qcom: sm6115: Disable SS instance in Parkmode for USB
  arm64: dts: qcom: sdm630: Disable SS instance in Parkmode for USB
  arm64: dts: qcom: msm8998: Disable SS instance in Parkmode for USB
  arm64: dts: qcom: ipq8074: Disable SS instance in Parkmode for USB
  arm64: dts: qcom: ipq6018: Disable SS instance in Parkmode for USB
  ...

Link: https://lore.kernel.org/r/20240709193406.3966-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2024-07-09 23:22:17 +02:00
Arnd Bergmann
ad828298af Three new boards, some improvements for the Lunzn Fastrhino R6xS boards, 
allowing dma on uarts connected to bluetooth modules and an update for
 the gpu operating points on rk356x. As well as some minor fixes for
 missing power-dmains and ethernet phy binding adherence.
 -----BEGIN PGP SIGNATURE-----
 
 iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmaMZvcQHGhlaWtvQHNu
 dGVjaC5kZQAKCRDzpnnJnNEdgaSfCAC1TuxdQmBvHYAn1aLdGLYpU6u1ezvPynGg
 eR9dyiQZPiDAyHMCuZl5E8shIb+hnGJtvPP2+sleb1YVEK+FHNPKYu7ZD36Z3aHW
 I1YVSVFq6r/dq5LPBxhAs4It6mTQ9sBrEOHFluSuR/Ny/ERsxBBh2QdG6q0f6vlF
 lwWTxvQtGpFMgvf+UVeNTmjEbA//Xnvi/BP4NyrQkfNAfeTHav1JlpEVbuKRt+2R
 WpFk/RviET9MuclNbGBlq8U1ggPxWch/o8f6Qz1R7wVymgiHihJwFIFk0eAFKyKd
 rTdf+H01KrDWkasAEsaWYG/4bWId+lppKVA0YUlk3sPRuiewAKl8
 =VcOx
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmaM+WAACgkQYKtH/8kJ
 UieAtg/+MinvUFuYNrsiUTsxnaMN0Z32nKM//WQ6pU8Rr4qK6X1Fa8WKkrB/sa2+
 fqERdYTq6EX9U/zT3way9iuLkvLs4/tOnMGOOP0yKg5qMx3lYfAQ/r3ZfLnvurp4
 +x/ErGfW63ZMSl95iq8+hM0tYK4lr+xl11zg7SCbC0zVeFn42wL70o3bNbSnW/cV
 qZRMER6mDymqhZ9Bf1tM7PDhzC9JhlYH3ZLi1ovAOZlMZpcOVBUraTxupkAAvKJW
 wp7WsA64PJ3uPyNVbQZG27kRgG9Qu5zjI8a1f065l20GAhoviZmgO7Ygy3gkXhi/
 aSiKG31VIrXPb/bKhXlhbhKUPigAo3aJQ8teNochniTxSXoQxeLXeoopnHe2znG1
 AYhlpaU+wecu3oGq9cI5rHBQ2I0glQYXbmTV9+CCJJoGxyr+kk6OmBBMbplbGltK
 YCG6kNpnPbPJNAHyZesJNVfclKcJrKI/nepu56N0gFNkMQUWFgDFOLaHMdm/9zvm
 GJO/OmB1p/uOL42TctQ3D5JoyyiohjB+aUWViujMPeFGjOvROLDhCllQSNE5gDK2
 BpTKFdsyE69zy48BvZYIVg46bXa3iIn47d1et54Ze/kqhh6XYZ0RKNfr8m28ASSx
 CEwABBj7UX5xwAA60pIdnHapyZx+KTNRg6eEs/ChTsao3EkC82k=
 =lz4I
 -----END PGP SIGNATURE-----

Merge tag 'v6.11-rockchip-dts64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt

These are two additional boards, the Xunlong Orange Pi 3B and
the Add Radxa ROCK 3B.

* tag 'v6.11-rockchip-dts64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  arm64: dts: rockchip: Add Xunlong Orange Pi 3B
  dt-bindings: arm: rockchip: Add Xunlong Orange Pi 3B
  arm64: dts: rockchip: Add Radxa ROCK 3B
  dt-bindings: arm: rockchip: Add Radxa ROCK 3B

Link: https://lore.kernel.org/r/2191200.GUh0CODmnK@diego
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2024-07-09 10:48:31 +02:00
Jonas Karlman
d79d713d60 arm64: dts: rockchip: Add Xunlong Orange Pi 3B 
The Xunlong Orange Pi 3B is a single-board computer based on the
Rockchip RK3566 SoC.

Add initial support for eMMC, SD-card, Ethernet, HDMI, PCIe and USB.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20240626230319.1425316-3-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
 2024-07-09 00:16:29 +02:00
Jonas Karlman
846ef7748f arm64: dts: rockchip: Add Radxa ROCK 3B 
The Radxa ROCK 3B is a single-board computer based on the Pico-ITX form
factor (100mm x 75mm). Two versions of the ROCK 3B exists, a community
version based on the RK3568 SoC and an industrial version based on the
RK3568J SoC.

Add initial support for eMMC, SD-card, Ethernet, HDMI, PCIe and USB.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20240627211737.1985549-3-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
 2024-07-09 00:16:29 +02:00
Arnd Bergmann
6355edbb3d One new board, the pretty interesting Rock 5 ITX, some improvements 
for the Lunzn Fastrhino R6xS boards, allowing dma on uarts connected
 to bluetooth modules and an update for the gpu operating points on
 rk356x. As well as some minor fixes for missing power-dmains and
 ethernet phy binding adherence.
 -----BEGIN PGP SIGNATURE-----
 
 iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmaL+iUQHGhlaWtvQHNu
 dGVjaC5kZQAKCRDzpnnJnNEdgbyuB/9Uwa5aie3zf/KRuXdb19UAigKxt1HWxU0f
 z7hHyFEZoLpByFsE1H0MtKiGdIkuIrwACoPU0bRLFoPOGpvT3ZbiO5vYmjOe/pmb
 U2jYKR42TOKbWtAW8jlB+OCKnltVgDyUzetersRpLBFT6ukGK5asEapfcSer3p6u
 NFM/92wNDgf3KU8oY4cxZlXs11p3kRXSU+TV38qYCxGVo9hzZASPqsCCAwBgMK9N
 v6bPdZBkv0n/iANPZQcM4lrn0p28gbkDuHrgX9gnd/megh0F4XPxmVdZaM8umdmv
 /O+woP0/9q4ZY4/+qNRYnZOVL84Gi/QWg52Iu7npYQ7509p7PK05
 =LRjK
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmaMCg4ACgkQYKtH/8kJ
 UiexpQ//WMMP4xLj8Nv/MRNxvT8XM2k0ExgrshuRQ2JoDv4sXkDvt7/MKTFRzs+G
 4vDmk+kdmgEcBOnV/ZtRu2e4ECZOpfVytOAINqUHYIlkvOFrERAoa8qQ+GWonRMx
 v+dQubDDin79OJzaNyipL5CIR9Ux8Xw0T800IP6ppgLa6Cpy853haD0/XxxFvtb3
 YHYhwx9qwcNKGCCpl77VrPIj7HIoMp/43M3XOVq6cFSyJ1X24fOVDIxSs5w2Oadd
 YyOxeiyNvqYqRNMJ6UWcHX/87HyXXvx/mh7vxzelG7XdOVSzzTPkGY8KnDKpvQRZ
 mvQzo1XGuC7a7o4LF+5Cfmq1uxvf19IFHISoMc78KpINXbTQeeDKaz7oJ33kej0K
 h3Y4YyITKwTYQV2XuZIU4HfVpeQzRpeRWSmuq+fc4J16G35S5wqYVfC4u94JSzcR
 NJ1XKWTHpdqEGPlLoVCiTOr+mqTEsPgpb1jNJJmBPxXUX9msKauWWHB9zotYNtNr
 wat3l8fqwhmG9o0hKH4ijs7eWLFI41v9lMxzqliqggXlXjS/cY6/7Oa5dmLKqTHr
 /YOLB/sIMO/0vkq176RRlufzZMpjlw2K1rMGtfhc/Erq+0rURKqG64D/BjYKY04k
 JMNDCVnlY0cRXcx8FNEok9Dswe8W/g0YkBeIT2c8WA5gCLeGnWM=
 =A0a5
 -----END PGP SIGNATURE-----

Merge tag 'v6.11-rockchip-dts64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt

One new board, the pretty interesting Rock 5 ITX, some improvements
for the Lunzn Fastrhino R6xS boards, allowing dma on uarts connected
to bluetooth modules and an update for the gpu operating points on
rk356x. As well as some minor fixes for missing power-dmains and
ethernet phy binding adherence.

* tag 'v6.11-rockchip-dts64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  arm64: dts: rockchip: add ROCK 5 ITX board
  dt-bindings: arm: rockchip: Add ROCK 5 ITX board
  arm64: dts: rockchip: Add dma-names to uart1 on Pine64 rk3566 devices
  arm64: dts: rockchip: Add avdd supplies to hdmi on rock64
  arm64: dts: rockchip: fixes PHY reset for Lunzn Fastrhino R68S
  arm64: dts: rockchip: disable display subsystem for Lunzn Fastrhino R6xS
  arm64: dts: rockchip: remove unused usb2 nodes for Lunzn Fastrhino R6xS
  arm64: dts: rockchip: fix pmu_io supply for Lunzn Fastrhino R6xS
  arm64: dts: rockchip: fix usb regulator for Lunzn Fastrhino R6xS
  arm64: dts: rockchip: fix regulator name for Lunzn Fastrhino R6xS
  arm64: dts: rockchip: Add dma-names to uart1 on quartz64-b
  arm64: dts: rockchip: Update GPU OPP voltages in RK356x SoC dtsi
  arm64: dts: rockchip: Add GPU OPP voltage ranges to RK356x SoC dtsi
  arm64: dts: rockchip: Drop ethernet-phy-ieee802.3-c22 from PHY compatible string on all RK3588 boards
  arm64: dts: rockchip: Add missing power-domains for rk356x vop_mmu

Link: https://lore.kernel.org/r/1998182.CrzyxZ31qj@diego
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2024-07-08 17:47:26 +02:00
Arnd Bergmann
2d61b9303c Qualcomm Arm64 DeviceTree updates for v6.11 
This introduces 11 new boards, namely:
 * ASUS Vivobook S 15
 * Lenovo Smart Tab M10 DTS
 * Motorola Moto E 2015 LTE (surnia)
 * Motorola Moto G 2015 (osprey)
 * Motorola Moto G4 Play (harpia)
 * Qualcomm AIM300 AIoT development board
 * Qualcomm SM8650 Hardware Development Kit (HDK)
 * SHIFTphone 8
 * Samsung Galaxy Z Fold5
 * Schneider HMIBSC board DTS
 * TP-Link Archer AX55 v1
 
 Of particular interest here is the Asus Vivobook, the first supported X1
 Elite consumer laptop.
 
 For IPQ6018 an SDHCI controller is added and on IPQ9574 an MDIO bus is
 described.
 
 The improvements to MSM8916-based devices continues, with sound and
 mdoem support added to Acer Iconia Talk S and GPLUS FL8005A, the latter
 also gaining BMS support. Samsung Galaxy devices gains PMIC and charger
 definitions, NFC support and MUIC. Accelerometer and magnetometer
 support is added to the Samsung Galaxy Grand Prime devices.
 
 On MSM8976 definitions for IOMMU, the display subsystem, wifi subsystem,
 and Adreno GPU are added.
 
 On MSM8996 UFS core clock frequencies are specified, FastRPC nodes are
 added for the audio DSP, glink-edges are described where available, the
 display subsystem reset is added.
 
 Venus is introduced on MSM8998 and the "No MSA Ready" quirk is added to
 allow ath10k to come up.
 
 GPU support is added to QCM2290 and enabled on the RB1 development
 board.
 The I2C controller used for communicating with the LT9611UXC HDMI
 bridge is temporarily replaced with i2c-gpio while issues with the
 builtin controller is diagnosed. The same is done for RB2, on the
 QRB4210 platform.
 On RB2 TCPM max current draw is corrected and the vreg_l9a regulator is
 marked as always on to match expectations.
 
 On the QDU1000 platform, USB is added, secure QFPROM is introduced to
 allow LLCC to access OTP data. USB is enabled on the two IDP boards.
 
 SA8775p gains PCIe endpoint definitions, LLCCC support, IMEM and PIL
 info regions. Nodes are marked as dma-coherent as needed, a dedicated
 carveout for shared memory bridge allocations is introduced.
 The SA8775P ride device is split in the two versions r2 and r3.
 
 The SC7180 Trogdor clamshell/detachable fragments are refactored for
 convenience, and pwmleds are disabled where unused.
 
 On SC7280 the APR nodes for interfacing with the audio services in audio
 DSP firmware are introduced. The Qualcomm SMMU TBUs are described, to
 enable improved debug support. QoS clocks are added to interconnects, as
 needed in order to operate the QoS settings on some buses.
 SuperSpeed in park is disabled for the primary DWC3 instance to address
 host controller issues under load.
 
 The PM8008 (camera PMIC) is introduced in Fairphone 5, regulators are
 named for better output, and firmware name for IPA is adjusted to the
 preferred file format.
 The HDMI bridge on Rb3gen2 is described, rtc, gpi-dma and qup nodes are
 enabled.
 
 The Type-C port manager found in PM7250b is enabled, for targets not
 using pmic-glink firmware for Type-C management.
 
 SC8180X gets a number of smaller corrections, and some cleanups -
 related to both functional issues and DeviceTree validation.
 
 The PSHOLD node is marked reserved, after reports that this causes
 issues during shutdown. Description of the USB signals are updated to
 match the signal path. The PM8008 camera PMIC is added to Lenovo
 ThinkPad X13s.
 
 The PM660 PMIC is extended with charger and rradc definitions, and the
 SDM670 gains a SMEM region definition.
 
 On SDM845 the Qualcomm SMMU TBU nodes are described, to enable improved
 debug output during faults etc. The UFS PHY is associated with its GDSC,
 and the DisplayPort controller is wired up to the QMP PHY.
 
 The Lenovo Yoga C630 Embedded Controller is introduced, adding battery
 and Type-C port management and altmode support. The C630 also gains WiFI
 calibration variant information, to cause selection of the right data.
 The missing IPA firmware path is corrected.
 
 For the SDX75 platform, AOSS, IPCC, SDHCI, TCSR, modem SMP2P, I2C and
 SPI nodes are introduced. SD-card support is added to the IDP board.
 
 CPUfreq support is introduced for the SM4450 platform.
 
 Missing reset is added to the SDHC controller of SM6115. The UFS PHY
 is associated with its GDSC, so is the PHY on SM6350.
 
 On Fairphone 4, the camera pmic (PM8008) is introduced, regulators are
 named for more informative debug output, and USB role switching is
 enabled.
 
 On the Fairphone 3, vibrator support is added and enabled.
 
 On SM8250, the USB signal paths are properly described in the OF graph,
 the UFS PHY gains its required power-domains description.
 Thanks to the introduction of PCI power sequence support, the QRB5165
 RB5 WiFi chip can now be powered up, so this is added.
 
 Touchscreen interrupt flags are corrected accross a number of Sony
 Xperia devices, to remove the unexpected traces from downstream.
 
 On SM8450 an OPP-table is introduced for the PCIe controllers, to
 specify the bandwidth and performance state requirements for the
 different genrations and link widths. For this the PCIe controllers also
 gains interconnect path definitions. The LLCC register layout is
 corrected, and the UFS PHY is associated with its GDSC.
 
 On the SM8550 development boards speaker port mapping is added. WiFi
 support is finally enabled on the QRD board.
 The new AIM300 development platform/board is introduced.
 
 For SM8650 video and camera clock controller are introduced. SCM node
 gains details necessary to trigger USB ramdump (download mode) upon a
 system crash.
 WiFi support and speaker port mapping is added to the QRD and the newly
 introduced HDK. On the MTP the USB Type-C connector is describe to be
 routed to the PHY.
 In addition to the base HDK, a Display Card overlay is also introduced.
 
 For X1 Elite bwmon, fastrpc and GPU support, tsens, and the missing PCIe
 6a instance are added. Thermal zones are described. Pmic-glink is
 introduced for both CRD and QCP devices, and remaining PMICs are
 described. Audio support is also added to the QCP.
 An explicit, larger, chunk of CMA memory is added to the various
 devices, in order to compensate for the lack of IOMMU for PCIe.
 
 Across a wide range of platforms, the thermal zone polling delays are
 removed as supplies are interrupt driven anyways. Also thermal related
 is the introduction of GPU thermal throttling, across many SoCs.
 
 The old SMSM implementation is finally transitioned to using the
 mailbox-based description and implementation for invoking interrupts on
 remote processors. As such interrupt-triggering is converted to use this
 mechanism on related platforms.
 
 The usb-role-switch property is removed for all USB instances hard coded
 to either host or peripheral across a range of boards.
 -----BEGIN PGP SIGNATURE-----
 
 iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmaJfz0VHGFuZGVyc3Nv
 bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3FxOMQALOlJsncvYy+WBZ+ganw3VTY43x+
 CYtmM+cvy/oEEmqLLKWO63XyPtiDuhwjjmjO9H7019Zhi7dB2odXfr8PH4Wz315G
 /nW99uEoR1kgdHtMwMhBv+gMSf00c6D5X3fbFxVbt2lqlaB9blZeqbA/PsAcC2Dr
 FId/ji6/cMdEmC1qbWtvBMSc9Cku7WNt/90qe9q5KuwKbRVF/FKPj+lfBxGnrjQ8
 vaKHmqVOYSV+cfuWqA/HrIe3WUds9eXv/F+O2nx22BTqEiBmlOxVR63LwQGFV9D+
 fOpRaIR30TxBk+DK/i4jnNu7UEA9lPf//0RDiKeyySAffLfQWBpURGcRUrF6X+yz
 7qdi8Ep/L1v7M+FKdPdCDooVxM91JHErPB65+/T/gLbI2Oe7MZED+hY/3UcTY8cr
 SkSH+3VeZk8M4DDFuVdgXcTBk1d/d1zqaKKokm9IkIqdAspDYJNvlOHMfgg1bsQe
 Ny9epqR+RR5wFulJ0W0YWGibOYkcubduAytvtad1lawmSTCmMI8SZb8K9n1l2RI3
 vYEgaSfOo0SHprgZlpULc+LqPF9n9W2RrME8iFIqpfsZ9ovFccr3QgNbHdtVZyoN
 t0DhAUk5UKEM4iQ4vf/7+T2WjFA2LMAg1Bznv8X4L69BVkAH/VwRudbwQe429Yqm
 psehVa9nc/+upil7
 =Hsda
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmaL+k8ACgkQYKtH/8kJ
 UiffeBAAlBRO7Pp8MCFco+63SXZQTGJ0UXmmrkWLiXW6iCGDuUrllCLuygOGZx8O
 FVQ9dBQ5AXQbOy++LTYvHIzWt3pCJSIlnbhiv9Na04IgBFnZ3Uy+e+Iikq25o51M
 gC2lIvLfwDaTVe8KMvLdNoTUN7jWFv6dZerNo35K6mLxf5nwU6bucljM2Vn0naSK
 6G4HMXA+ByvCMgSVOp4/5Qd3+XadH8604W+48n6aRM9YtLhTgV2bRRNY23y8hiAI
 IItgCMjzS30mbd6yrnXJOix0IoNhe9IxNKoKh8P0+G0CvAzH8s7KcVAlU+tiTsnR
 0vMKYcYPK6PW8T4umHSvTTEG3HR+uvC5vyWAnCKvlx2OElD80JoVp/IWvmy4n9Fv
 U3hltgntDkn8raupGgQ9oeM6EoVR6fq5UtzuaZgkElWyuSigVK9jOsG8hrqf1gdo
 w7I6APX4c1D8ArEvCbBUmff0hy4LqnScwz+7evFwZORMDYiYxhy2ybRZVYGknozA
 miEkVGZr+MHLCszF8kzetHOFhhddqvTWx6IEh/5SMPTkqnGfaOTc667rJ/hfHt8/
 8AYw3dfpKrXsf3KxeNVlVpJDNexZU3yHK2glNEpr0yvXAuYYXfmXhhNo2DHNDzyg
 VHd6J24UoWMpQisszsfFPBtBsianBTzsPhfCfmprg8um2f0MaKY=
 =2vUa
 -----END PGP SIGNATURE-----

Merge tag 'qcom-arm64-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt

Qualcomm Arm64 DeviceTree updates for v6.11

This introduces 11 new boards, namely:
* ASUS Vivobook S 15
* Lenovo Smart Tab M10 DTS
* Motorola Moto E 2015 LTE (surnia)
* Motorola Moto G 2015 (osprey)
* Motorola Moto G4 Play (harpia)
* Qualcomm AIM300 AIoT development board
* Qualcomm SM8650 Hardware Development Kit (HDK)
* SHIFTphone 8
* Samsung Galaxy Z Fold5
* Schneider HMIBSC board DTS
* TP-Link Archer AX55 v1

Of particular interest here is the Asus Vivobook, the first supported X1
Elite consumer laptop.

For IPQ6018 an SDHCI controller is added and on IPQ9574 an MDIO bus is
described.

The improvements to MSM8916-based devices continues, with sound and
mdoem support added to Acer Iconia Talk S and GPLUS FL8005A, the latter
also gaining BMS support. Samsung Galaxy devices gains PMIC and charger
definitions, NFC support and MUIC. Accelerometer and magnetometer
support is added to the Samsung Galaxy Grand Prime devices.

On MSM8976 definitions for IOMMU, the display subsystem, wifi subsystem,
and Adreno GPU are added.

On MSM8996 UFS core clock frequencies are specified, FastRPC nodes are
added for the audio DSP, glink-edges are described where available, the
display subsystem reset is added.

Venus is introduced on MSM8998 and the "No MSA Ready" quirk is added to
allow ath10k to come up.

GPU support is added to QCM2290 and enabled on the RB1 development
board.
The I2C controller used for communicating with the LT9611UXC HDMI
bridge is temporarily replaced with i2c-gpio while issues with the
builtin controller is diagnosed. The same is done for RB2, on the
QRB4210 platform.
On RB2 TCPM max current draw is corrected and the vreg_l9a regulator is
marked as always on to match expectations.

On the QDU1000 platform, USB is added, secure QFPROM is introduced to
allow LLCC to access OTP data. USB is enabled on the two IDP boards.

SA8775p gains PCIe endpoint definitions, LLCCC support, IMEM and PIL
info regions. Nodes are marked as dma-coherent as needed, a dedicated
carveout for shared memory bridge allocations is introduced.
The SA8775P ride device is split in the two versions r2 and r3.

The SC7180 Trogdor clamshell/detachable fragments are refactored for
convenience, and pwmleds are disabled where unused.

On SC7280 the APR nodes for interfacing with the audio services in audio
DSP firmware are introduced. The Qualcomm SMMU TBUs are described, to
enable improved debug support. QoS clocks are added to interconnects, as
needed in order to operate the QoS settings on some buses.
SuperSpeed in park is disabled for the primary DWC3 instance to address
host controller issues under load.

The PM8008 (camera PMIC) is introduced in Fairphone 5, regulators are
named for better output, and firmware name for IPA is adjusted to the
preferred file format.
The HDMI bridge on Rb3gen2 is described, rtc, gpi-dma and qup nodes are
enabled.

The Type-C port manager found in PM7250b is enabled, for targets not
using pmic-glink firmware for Type-C management.

SC8180X gets a number of smaller corrections, and some cleanups -
related to both functional issues and DeviceTree validation.

The PSHOLD node is marked reserved, after reports that this causes
issues during shutdown. Description of the USB signals are updated to
match the signal path. The PM8008 camera PMIC is added to Lenovo
ThinkPad X13s.

The PM660 PMIC is extended with charger and rradc definitions, and the
SDM670 gains a SMEM region definition.

On SDM845 the Qualcomm SMMU TBU nodes are described, to enable improved
debug output during faults etc. The UFS PHY is associated with its GDSC,
and the DisplayPort controller is wired up to the QMP PHY.

The Lenovo Yoga C630 Embedded Controller is introduced, adding battery
and Type-C port management and altmode support. The C630 also gains WiFI
calibration variant information, to cause selection of the right data.
The missing IPA firmware path is corrected.

For the SDX75 platform, AOSS, IPCC, SDHCI, TCSR, modem SMP2P, I2C and
SPI nodes are introduced. SD-card support is added to the IDP board.

CPUfreq support is introduced for the SM4450 platform.

Missing reset is added to the SDHC controller of SM6115. The UFS PHY
is associated with its GDSC, so is the PHY on SM6350.

On Fairphone 4, the camera pmic (PM8008) is introduced, regulators are
named for more informative debug output, and USB role switching is
enabled.

On the Fairphone 3, vibrator support is added and enabled.

On SM8250, the USB signal paths are properly described in the OF graph,
the UFS PHY gains its required power-domains description.
Thanks to the introduction of PCI power sequence support, the QRB5165
RB5 WiFi chip can now be powered up, so this is added.

Touchscreen interrupt flags are corrected accross a number of Sony
Xperia devices, to remove the unexpected traces from downstream.

On SM8450 an OPP-table is introduced for the PCIe controllers, to
specify the bandwidth and performance state requirements for the
different genrations and link widths. For this the PCIe controllers also
gains interconnect path definitions. The LLCC register layout is
corrected, and the UFS PHY is associated with its GDSC.

On the SM8550 development boards speaker port mapping is added. WiFi
support is finally enabled on the QRD board.
The new AIM300 development platform/board is introduced.

For SM8650 video and camera clock controller are introduced. SCM node
gains details necessary to trigger USB ramdump (download mode) upon a
system crash.
WiFi support and speaker port mapping is added to the QRD and the newly
introduced HDK. On the MTP the USB Type-C connector is describe to be
routed to the PHY.
In addition to the base HDK, a Display Card overlay is also introduced.

For X1 Elite bwmon, fastrpc and GPU support, tsens, and the missing PCIe
6a instance are added. Thermal zones are described. Pmic-glink is
introduced for both CRD and QCP devices, and remaining PMICs are
described. Audio support is also added to the QCP.
An explicit, larger, chunk of CMA memory is added to the various
devices, in order to compensate for the lack of IOMMU for PCIe.

Across a wide range of platforms, the thermal zone polling delays are
removed as supplies are interrupt driven anyways. Also thermal related
is the introduction of GPU thermal throttling, across many SoCs.

The old SMSM implementation is finally transitioned to using the
mailbox-based description and implementation for invoking interrupts on
remote processors. As such interrupt-triggering is converted to use this
mechanism on related platforms.

The usb-role-switch property is removed for all USB instances hard coded
to either host or peripheral across a range of boards.

* tag 'qcom-arm64-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (279 commits)
  dt-bindings: arm: qcom: Document samsung,ms013g
  arm64: dts: qcom: Add device tree for ASUS Vivobook S 15
  dt-bindings: arm: qcom: Add ASUS Vivobook S 15
  arm64: dts: qcom: qrb4210-rb2: Correct max current draw for VBUS
  arm64: dts: qcom: msm8998: add venus node
  arm64: dts: qcom: sa8775p-ride-r3: add new board file
  arm64: dts: qcom: move common parts for sa8775p-ride variants into a .dtsi
  dt-bindings: arm: qcom: add sa8775p-ride Rev 3
  arm64: dts: qcom: sm8550-qrd: add port mapping to speakers
  arm64: dts: qcom: sm8550-mtp: add port mapping to speakers
  arm64: dts: qcom: sm8550-hdk: add port mapping to speakers
  arm64: dts: qcom: sm8650-qrd: add port mapping to speakers
  arm64: dts: qcom: sm8650-mtp: add port mapping to speakers
  arm64: dts: qcom: sm8650-hdk: add port mapping to speakers
  arm64: dts: qcom: sm7225-fairphone-fp4: Name the regulators
  arm64: dts: qcom: pm8916: correct thermal zone name
  arm64: dts: qcom: x1e80100: Add gpu support
  arm64: dts: qcom: x1e80100: Fix USB HS PHY 0.8V supply
  arm64: dts: qcom: qcs6490-rb3gen2: enable hdmi bridge
  arm64: dts: qcom: sm6115: add resets for sdhc_1
  ...

Link: https://lore.kernel.org/r/20240706173140.18887-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2024-07-08 16:40:15 +02:00
Arnd Bergmann
462eeb978d mvebu dt64 for 6.11 (part 1) 
armada-3720: align GPIO keys and LED node namee with bindings
 Add description for solidrun cn9130 som and clearfog boards
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCZofxAQAKCRALBhiOFHI7
 1a61AJwI37rg/Ki0O1OPKCfkdgrmHIIRoQCfR7rhEmu5lzgC5CwAcQhdtiEjSB4=
 =ONUU
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmaL+b0ACgkQYKtH/8kJ
 UidsFRAAnTaU5h/IsjYky4vOwtm+p2OoxbnOEAHzRySiJ8nAIZcYnm3i45tJK7Yt
 XzTRhDo1li3EpXgL+n4AZb4dY08c2dquoRky/7zSZnKV5XMhP6Oxzka3EwDq4i/s
 qpaMD5v22McpqbX+/y0eP0Ja7Bi5pbVQw5u+TpNqEb4NNVY38OXizREQZa0Pi3VX
 a/jqFCLNA9BCSZYDkFXjgToaoVnzfMfX0762DJqDoE3jE5ZUN3QWQMoCT6mx6aoD
 rdx9pmjELl3gtXkX+RHggfuHYiQOR/EwhscqpPQsLBUCyOzKsEXWsj4AJiBlTIqd
 dXLLLUfa5XZpQSJ0vOJzDGRbXJYxrHHL3cZBsJKpxN68ZMtWrCBO9UYUT4yAphvI
 FwFJv7adNvy65yCW0fFlIGXp3rNkG5day9rPo+2ENEIl4tACIADZD1O+EZf0ivYL
 1RFEb01OCsdJOsIlmOMIQ3NjAtwLJHBENm7+ctA7jNs4DLKyJp5SOnDVLqYinuF+
 6oDznE4upreB9ErBdejoP8bQKMsP7qwbbzg8YCsMwD3+aO/6fPrpiBlJBpMgT+4x
 VGQH0EuTe9XyPSbVosVfWR7wK083sQXMyDHWUwHrUj3oYdYf8Ux/CO690Teo/r2A
 2WAEaZT67Wraf451/kLlPWUsosgxCCPkZnc+gAVfLZxCqCua1qk=
 =XffQ
 -----END PGP SIGNATURE-----

Merge tag 'mvebu-dt64-6.11-1' of https://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt

mvebu dt64 for 6.11 (part 1)

armada-3720: align GPIO keys and LED node namee with bindings
Add description for solidrun cn9130 som and clearfog boards

* tag 'mvebu-dt64-6.11-1' of https://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
  arm64: dts: add description for solidrun cn9132 cex7 module and clearfog board
  arm64: dts: add description for solidrun cn9131 solidwan board
  arm64: dts: add description for solidrun cn9130 som and clearfog boards
  dt-bindings: arm64: marvell: add solidrun cn9132 CEX-7 evaluation board
  dt-bindings: arm64: marvell: add solidrun cn9130 som based boards
  arm64: dts: armada-3720: align LED node name with bindings
  arm64: dts: armada-3720: align GPIO keys node name with bindings

Link: https://lore.kernel.org/r/87wmlzixln.fsf@BLaptop.bootlin.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2024-07-08 16:37:49 +02:00
Arnd Bergmann
b4f8192afb TI K3 device tree updates for v6.11 
Generic Fixups/Cleanups:
 - main_pktdma reg ranges fixes
 - dtbs_check warning cleanups with addition of cpsw-mac-efuse node and
   dropping "syscon", "simple-mfd" compatibles in favor of simple-bus
 - Disable McASP FIFOs across SoCs for better latency
 - Add memory node to bootloader stage with bootph-all
 - Restructure am62p and j722s dtsi for share nodes across these SoCs
 - DT warning fixes around USB type-C connector node (AM62/AM62P)
 
 SoC Specific features and Fixes:
 AM62
 - GPMC and ELM addition
 
 AM62A
 - Enable RTC by default
 - Crypto accelerator support
 
 AM64 and AM65
 - PRU system event support
 
 AM69/J784S4:
 - CPSW2G and CPSW9G addition with QSGMII and UXSGMII board support
 - PCIe, USB, McASP, EHRPWM node additions
 
 AM67/J722s
 - Fix to update GPIO count
 - Add gpio-ranges definition
 - McASP support for audio
 - PCIe, USB, Serdes support
 
 Board Specific features and fixes:
 
 AM62
 - am62x-phyboard-lyra carrier board support
 - am625-verdin: nau8822 PLL support
 - sk: CMA node addition
 - lp-sk: NAND expansion card overlay
 
 AM62A
 - New phyboard-lyra-am62ax from phytec
 - CMA node addition
 
 AM64:
 - phycore-board: PMIC support
 - hummingbird-t: RS485 RTS pin polarity update
 - am6xx-phycore-som: overlays for variants w/o SPI, RTC, ETH PHY or w/
   QSPI
 - EVM: GPMC NAND expansion card overlay
 - EVM: ICSSG ethernet MII mode overlay support
 - SK: power supply temp sensors support
 
 AM68
 - SK: PMIC, OSPI
 
 J721e
 - SK: MCAN Support
 - Overlay for infotainment expansion board
 
 AM69/J784S4
 - EVM: PCIe RC/EP, USB3, MCAN support
 - SK: PMIC support
 -----BEGIN PGP SIGNATURE-----
 
 iQFDBAABCAAuFiEEyRC2zAhGcGjrhiNExEYeRXyRFuMFAmaICFIQHHZpZ25lc2hy
 QHRpLmNvbQAKCRDERh5FfJEW49SrB/dQ8b2v+JgzPBkOsV9ig96/BFJCOj8WfPfI
 quUpTkmsRGfD+dRAwBSlfFk/ulwXNf2i+ah3D5ITyplTMn78VYiPWFEMDoH4Uq7+
 CHX0hdYneBv4AwhQycQQcdPKrdP2D8vSFoldBMVNh9Tdhvx3RmM4JEhbsBq45SXx
 QLr8CQkKEYiwxMvnacD92ymhUQdzQC9K5W+J9MIxQAdnq9nc3sosgJbsTIDn1EEu
 ThFV5OK6zMfVSOIsvtUafv/UdlYmb9xMDZwvGgqa2wUFhdDy7bKj5spzQSQJmoH7
 ZJX3Wzfk1HPcPrU8j9anB9xP9WEFn+uzJEwsoscjFdiFL6RNJ3U=
 =tJcy
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmaL+PkACgkQYKtH/8kJ
 Uiex0A/5AVhK/PQ3Hfg8YMf+Z00A6w9LENtF/KowSlIook4eU/EgvMKO6m1R7ofJ
 ochJyHVXETD9S8ms+zABa0mAWUtvAtMn7x7RJuT+PrTJyLkHgx1VRCMoW3YxOqyq
 Y5k1Pec5/SwPRDKngcTeh1w8bCghj9l53j5/E1LtR01UmfwDWTo3m2DBghbI/+YK
 hvRIqgSxi5MAqXNNTJeDIxb6arR77NZ5CStfH6tj60B9RJWqJQeKfeMBSyg1ZYnv
 qBVfWdYfdkdVu8SR/W8xeYnOGM6E5sG0PfhnUH0WX2pgloL40ZXPOGw0lCNuND3c
 hDY+ZLGNSKtCu65JaiMF7m68tY2DnpjwAngzA+f1Ga5JP+UDXWfMqZMpnoHRCSpX
 9qGmVv45xXObGDmqETPJuElw2NTz9h6CCyrUjDpAmARAbdsK4BQ6amoI+eQTAfO3
 WxwepdU8rvpw8EUyKbphOdPShXdWu7DK1hVp82+Gjr1p4rYJwhQSAi91ajUubk0Z
 w8TLYKNjb685710xIwtC/pZejzUbsz3jkkb/022cHH6po1/VwhZ0OZXy1L6/nOLN
 XJmNDdpi/rhI939GNLla0OAzDlXqBe8dfiE2XQnlBWV534PTxbh0OlLM94lESG1G
 svcjd0IKrWi7xPnKr2Q+/IcIRIUjQHMsvzpk0fZn8CvY6gWIg1s=
 =7zo8
 -----END PGP SIGNATURE-----

Merge tag 'ti-k3-dt-for-v6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt

TI K3 device tree updates for v6.11

Generic Fixups/Cleanups:
- main_pktdma reg ranges fixes
- dtbs_check warning cleanups with addition of cpsw-mac-efuse node and
  dropping "syscon", "simple-mfd" compatibles in favor of simple-bus
- Disable McASP FIFOs across SoCs for better latency
- Add memory node to bootloader stage with bootph-all
- Restructure am62p and j722s dtsi for share nodes across these SoCs
- DT warning fixes around USB type-C connector node (AM62/AM62P)

SoC Specific features and Fixes:
AM62
- GPMC and ELM addition

AM62A
- Enable RTC by default
- Crypto accelerator support

AM64 and AM65
- PRU system event support

AM69/J784S4:
- CPSW2G and CPSW9G addition with QSGMII and UXSGMII board support
- PCIe, USB, McASP, EHRPWM node additions

AM67/J722s
- Fix to update GPIO count
- Add gpio-ranges definition
- McASP support for audio
- PCIe, USB, Serdes support

Board Specific features and fixes:

AM62
- am62x-phyboard-lyra carrier board support
- am625-verdin: nau8822 PLL support
- sk: CMA node addition
- lp-sk: NAND expansion card overlay

AM62A
- New phyboard-lyra-am62ax from phytec
- CMA node addition

AM64:
- phycore-board: PMIC support
- hummingbird-t: RS485 RTS pin polarity update
- am6xx-phycore-som: overlays for variants w/o SPI, RTC, ETH PHY or w/
  QSPI
- EVM: GPMC NAND expansion card overlay
- EVM: ICSSG ethernet MII mode overlay support
- SK: power supply temp sensors support

AM68
- SK: PMIC, OSPI

J721e
- SK: MCAN Support
- Overlay for infotainment expansion board

AM69/J784S4
- EVM: PCIe RC/EP, USB3, MCAN support
- SK: PMIC support

* tag 'ti-k3-dt-for-v6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (89 commits)
  arm64: dts: ti: k3-am62a7-sk: Reserve 576MiB of global CMA
  arm64: dts: ti: k3-am62x-sk-common: Reserve 128MiB of global CMA
  arm64: dts: ti: k3-am62x-sk-common: Fix graph_child_address warns
  arm64: dts: ti: k3-am62p5-sk: fix graph_child_address warnings
  arm64: dts: ti: k3-j722s: Add gpio-ranges properties
  arm64: dts: ti: k3-am62p: Add gpio-ranges properties
  arm64: dts: ti: k3-pinctrl: Define a generic GPIO MUX Mode
  arm64: dts: ti: k3-am62: Add cpsw-mac-efuse node to wkup_conf
  arm64: dts: ti: k3-am62a: Add cpsw-mac-efuse node to wkup_conf
  arm64: dts: ti: k3-j784s4: Add cpsw-mac-efuse node to mcu_conf
  arm64: dts: ti: k3-j721s2: Add cpsw-mac-efuse node to mcu_conf
  arm64: dts: ti: k3-j721e: Add cpsw-mac-efuse node to mcu_conf
  arm64: dts: ti: k3-j7200: Add cpsw-mac-efuse node to mcu_conf
  arm64: dts: ti: k3-am65: Add cpsw-mac-efuse node to mcu_conf
  arm: dts: k3-am642-evm-nand: Add bootph-all to NAND related nodes
  arm64: dts: ti: Add basic support for phyBOARD-Lyra-AM62Ax
  dt-bindings: arm: ti: Add bindings for PHYTEC AM62Ax based hardware
  arm64: dts: ti: Add am62x-phyboard-lyra carrier board
  arm64: dts: ti: k3-am62a: Enable AUDIO_REFCLKx
  arm64: dts: ti: k3-j784s4-evm: Enable analog audio support
  ...

Link: https://lore.kernel.org/r/37f251a1-f3bd-402f-ab22-cf786c3871d7@ti.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2024-07-08 16:34:33 +02:00
Arnd Bergmann
03b4edd51f STM32 DT for v6.11, round 1 
Highlights:
 ----------
 
 -MCU:
   - Add syscfg missing clock on stm32f429.
 
 - MPU:
   - STM32MP13:
     - Add camera support on stm32mp135f-dk bord using DCMIPP and
       GC2145 sensor.
     - Document PWM output for stm32mp135f-dk
     - Add goodix touchscreen support on stm32mp135f-dk board.
     - Add new DH DHCOR / DHSBC board (Som + carrier board) based on
       STM32MP135F SoC.
       SOM part contains: STM32MP135F SoC, 512MB DDR2L RAM and
       eMMC/SDIO wifi module.
       The carrier boards embedds 2 RGMII ETH ports, USB-A,USB-C
       and an extansion connector.
     - Add Ethernet controller support on stm32mp135f-dk.
       It uses LAN8742A PHY based on RMII.
 
   - STMP32MP15:
     - Rework Octavo OSD32MP1 split for USB phy.
     - Add OP-TEE IRQ for asynchronous notification support.
       It allows OP-TEE to trig Linux.
 
   - STM32MP25:
     - Add OP-TEE IRQ for asynchronous notification support.
       It allows OP-TEE to trig Linux.
     - Enable firewall for RCC.
     - Add all U(s)ART nodes for stm32mp25.
     - Add 3 power domains for low power modes.
     - Add HPDMA support.
     - Add Ethernet controller (ETH2) support on stm32mp257f-ev1.
       It uses Realtek PHY based on RGMII.
     - Add and enable SCMI regulator support.
 -----BEGIN PGP SIGNATURE-----
 
 iQJRBAABCgA7FiEEctl9+nxzUSUqdELdf5rJavIecIUFAmaH7ZodHGFsZXhhbmRy
 ZS50b3JndWVAZm9zcy5zdC5jb20ACgkQf5rJavIecIUnhg/+PwLoDlTR8+Mo5IXr
 81tN6imRXIS9EfV/XTsQAqAWFqpEtdtQOlcogrK1nOkdpRsjYTkrNmz/4dLthhoA
 6xFVLwxNBjqwSxM4pfDWr7pC01OLKCG92J+vnPU+ytXJGodwHj4c2cJKQqDPNcPZ
 b3C9MhYmY322O/oh6CxgsFZRqZmpELPPVOJTpI7V+E85+CngY55I5ovBMqFpo9P1
 rh2ubk7UdgUuawrkqJptrOLcceLgYWdEHTbzfNySROtwTuEZoVvOq11DMdcdFnLt
 6ojAvnJ2GTTVMHmCA53mBoOKKjME1kNbhnHuuJneZ6ZHyK3hY4z8xNVstZHE7zV5
 3HGCYkSBaLzp6G1JbXMTDUJQ+Nv0fIRoBB9cJLTXdsRyQTqf2f94EMZH2MbRADCi
 hoHbKpSyLMu2r8XmwA9e4+37+HmMrLyKqh1tk7kYrGuG+mwRw6iwFvO9UE0jr03D
 Ahzuwvle4OWOff85gZ166SacdM5ju0z6aQbj/N8zaasaxBx/aWfpYZfU8EdCR+ym
 +AWb9OCzt2Y7j/BAoUXWD4ckMiZn17yMZ7h5YyPLORCvjbR+RWU0ayQ6nT4MMfBq
 ttPWepJPDcxaH7dlrAThWAJ7p+H9iZPdHu0wZjhTBfPNrOL87OxNm5dwbznVLjdP
 22OIMoRg/t08hBeORECboSOeGxM=
 =sjji
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmaL+KUACgkQYKtH/8kJ
 UiehdRAAn8dwWo+MPfd7fRIxQrYm0SOiiFTC4j4LHNzCDQd7JV93p5FjYo3TpHAA
 wXtKYqFDZ8rbxWca3say015iOkYvLmRWOXM9Zs19U6gpsoW0OeiJvQs0pnPYQdXL
 ZJxL2YOn3nFfZ3IHxlTcyzoayX5uPZ/KJ/HE6ZLfMk8hCOdzPXoixH/WH1YQgXgc
 0EXiSxVbthDb8XbSLF8mz4jZpW0neFwetskkjoUUUO4wbyUi53IThxShAMyyFnBf
 ypoG1XTl1bD3DZFOrTQeILh+gR2Hg+EMttvqzooP8B/OAzHC6R/v0H92k3muE+FD
 bH4PrFc7aYmV7NnZI61FJzAXjSLrZ8pRFkjyKbenGiSLN9De57pH8CVXC8yeoTzy
 HKvk6E9VXmOh+KOwAXY+oQTHp4HMamWH8wFvOSf3nDNyW77u4q4g+Mh60uPeCek5
 RlwO/qe+3aOZoem3KskZ4/68iUDftcs+4Ga9O3jceQi/EEjAhz6gV54dNYC9OYi2
 VwouIqkS0JWJwH/1hfAgmbYhPdxfKds4kbAGFBjb9rsrf2okjeg/MY0NuZgtehqu
 iJ2Q2wTfS8mpX+DbBRHZLXe/pxTiw83Ftkq/x0K8gAArfltJxbqzVuGec9aUdvJI
 xyZrekj5MmsSsV0FpqBsgiHDG6GP9yPOy2zkMDYK6//qn+tyvFQ=
 =EqEk
 -----END PGP SIGNATURE-----

Merge tag 'stm32-dt-for-v6.11-1' of https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt

STM32 DT for v6.11, round 1

Highlights:
----------

-MCU:
  - Add syscfg missing clock on stm32f429.

- MPU:
  - STM32MP13:
    - Add camera support on stm32mp135f-dk bord using DCMIPP and
      GC2145 sensor.
    - Document PWM output for stm32mp135f-dk
    - Add goodix touchscreen support on stm32mp135f-dk board.
    - Add new DH DHCOR / DHSBC board (Som + carrier board) based on
      STM32MP135F SoC.
      SOM part contains: STM32MP135F SoC, 512MB DDR2L RAM and
      eMMC/SDIO wifi module.
      The carrier boards embedds 2 RGMII ETH ports, USB-A,USB-C
      and an extansion connector.
    - Add Ethernet controller support on stm32mp135f-dk.
      It uses LAN8742A PHY based on RMII.

  - STMP32MP15:
    - Rework Octavo OSD32MP1 split for USB phy.
    - Add OP-TEE IRQ for asynchronous notification support.
      It allows OP-TEE to trig Linux.

  - STM32MP25:
    - Add OP-TEE IRQ for asynchronous notification support.
      It allows OP-TEE to trig Linux.
    - Enable firewall for RCC.
    - Add all U(s)ART nodes for stm32mp25.
    - Add 3 power domains for low power modes.
    - Add HPDMA support.
    - Add Ethernet controller (ETH2) support on stm32mp257f-ev1.
      It uses Realtek PHY based on RGMII.
    - Add and enable SCMI regulator support.

* tag 'stm32-dt-for-v6.11-1' of https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (31 commits)
  arm64: dts: st: describe power supplies for stm32mp257f-ev1 board
  arm64: dts: st: add scmi regulators on stm32mp25
  regulator: Add STM32MP25 regulator bindings
  ARM: dts: stm32: omit unused pinctrl groups from stm32mp13 dtb files
  arm64: dts: st: enable Ethernet2 on stm32mp257f-ev1 board
  arm64: dts: st: add eth2 pinctrl entries in stm32mp25-pinctrl.dtsi
  arm64: dts: st: add ethernet1 and ethernet2 support on stm32mp25
  arm64: dts: st: add HPDMA nodes on stm32mp251
  ARM: dts: stm32: Add ethernet support for DH STM32MP13xx DHCOR DHSBC board
  ARM: dts: stm32: order stm32mp13-pinctrl nodes
  ARM: dts: stm32: add ethernet1 for STM32MP135F-DK board
  ARM: dts: stm32: add ethernet1/2 RMII pins for STM32MP13F-DK board
  ARM: dts: stm32: add ethernet1 and ethernet2 support on stm32mp13
  ARM: dts: stm32: Document output pins for PWMs on stm32mp135f-dk
  ARM: dts: stm32: OP-TEE async notif interrupt for ST STM32MP15x boards
  ARM: dts: stm32: Missing clocks for stm32f429's syscfg.
  ARM: dts: stm32: Add support for STM32MP13xx DHCOR SoM and DHSBC board
  ARM: dts: stm32: Add pinmux nodes for DH electronics STM32MP13xx DHCOR SoM and DHSBC board
  dt-bindings: arm: stm32: Add compatible string for DH electronics STM32MP13xx DHCOR DHSBC board
  ARM: dts: stm32: osd32: move pwr_regulators to common
  ...

Link: https://lore.kernel.org/r/8f10bd29-d067-4060-89ff-2e1a605f3141@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2024-07-08 16:33:08 +02:00
Arnd Bergmann
9289b97a67 Allwinner SoC device tree changes for 6.11 
This includes a commit shared with the clk tree. This commit adds clock
 and reset indices to the device tree binding, and thus is needed for
 both the device tree and driver changes.
 
 ARM64 device tree and binding-only changes
 - Add LRADC (low resolution ADC for resistor network based keys) for H616 SoC
 - Add cache information for A64, H6, and H616 SoCs
 - Correct model names and descriptions for Pine64 boards
 - Add GPADC (general purpose ADC) for H616 SoC
 - Add ADC joysticks based on GPADC for anbernic-rg35xx-h board
 - Add additional CPU OPPs for the H700 on top of existing H616 ones
 - Enable DVFS for rg35xx boards
 - Add IOMMU for H616 SoC
 
 RISC-V device tree changes
 - Add system LDOs to D1s/T113 SoC
 - Add ClockworkPi and DevTerm device trees
 -----BEGIN PGP SIGNATURE-----
 
 iQJCBAABCgAsFiEE2nN1m/hhnkhOWjtHOJpUIZwPJDAFAmaC5BEOHHdlbnNAY3Np
 ZS5vcmcACgkQOJpUIZwPJDDszRAAohtAXVlhcOZUyY6jnToNDRhRDe4WR2dKNuth
 D/sM93uBxEtHkHsV11xKdmXALYszT3c1IxA84Cj3uwBvutIK4/KQUDbtDvGedz/o
 90v3bgAR1ETf7RrQFCxpQUFYNufpnXb5ZHA5jRSdxyg9coLR7sDab0r6UCh/EzyN
 rykvB2oSmjxyG0OjBUU3IcR0B5nliGRc9esVhdSW4cGblaJaT/NrlsmUGL39hXP2
 BayJ3FFfS2izs5uHMOeQUaveadBGssc/kzJvnwy/jeM+76uY4SlH58/dl0ivWM0/
 h5mifWbMIdl5kUEkUz7OaPT9O6K/1O1/heQYrQSHNKtgD6NN9uS4QWuGyfsWcpUo
 iRXnYrscWuGQH8ICAG9upNCto2RXn1nS3+FYv/CmNQ+Nl39RpGGWKW9KPesCttdr
 OgjWGgspyBT3xh4NhrxLbEOmZaCg6ZGfr8Vp4VrXLMbSOrV6Qu8VsJcRWkfwm3yb
 tg9ONSFrSBNwmWQIqjtpWt3j81sOKkz2WYV6+hNgDyQ5HZQZWNHhOUVQ2W912TNh
 vJ9d+3jgtn9wj2DyPdkzPRaNaVK+KqRbpUIXLc7TUAJaMcHzX6+ekt1576ZBNUYL
 hFOoMvzu6k02Fmr8qUe9PX2p5Ie6ubF+2/aWGkZ0pF2cdht1Q6IDiXsSX3PW+VBU
 acB1TT0=
 =3vmg
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmaL9/8ACgkQYKtH/8kJ
 UifiHRAA0qHvjj5uaQiQnjJgOFF+Rmf3goNje2S9f35ziO2AGKqsfp651mBbZFpJ
 yFkIMlELMBLmgB9cEXfvoWlvUjITxduiMjn0aNfu4czRhhk1qiqwy+CVhDHT681g
 71s1crZ0gT/B9hNQkfHz6AmrvMl6k9NPHioaci4abRNXsGNrZuuSFNOAC82l8nrb
 PLJZtNOEbtkVP5pdBatTlsdJywOLpl1KwYvXbbC8oXvMobywUSsW/gjcHV0hUjlp
 4kwDEyi1cUGeNEuPAcp2Pp0H+WtHJsaTN1BhIy3kyCGiCXX3ShkZiaYIPwBGdUrz
 NJihJ/WoU2pMzlX5OH2L2d1KybZhOPB+kzSqw2TWyZuKNc+HY3BaXeZ8uVUz59Tv
 WSml2dz4+T816jDcBrK9sFC1uiJlbieKNJsH8Ol0FykJcfjD48tP7Y1uMhqN3ict
 y/FZ6nvPNEf7YPGGTXDjn0d5ifXAyGXLhIWxRXBP701HAzTkUPeTEdMLwj+6H1eh
 HBxFaa4yeAtH9+0c/Tf1Ge244OxbavwjJU4ufyD7X440nHqFVXQvF2FD451tBd5F
 HbXZ3cm+E8/zg55L0sAcY++5W+Aa2S+TvK64nrKcGEEDonBj3WwdNL5iwtzugWCv
 /AQg1UP3uQIyPvrwcyyoG8lenyHjOhZnACH3qbxpO9JnnwEIXQk=
 =Emn4
 -----END PGP SIGNATURE-----

Merge tag 'sunxi-dt-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt

Allwinner SoC device tree changes for 6.11

This includes a commit shared with the clk tree. This commit adds clock
and reset indices to the device tree binding, and thus is needed for
both the device tree and driver changes.

ARM64 device tree and binding-only changes
- Add LRADC (low resolution ADC for resistor network based keys) for H616 SoC
- Add cache information for A64, H6, and H616 SoCs
- Correct model names and descriptions for Pine64 boards
- Add GPADC (general purpose ADC) for H616 SoC
- Add ADC joysticks based on GPADC for anbernic-rg35xx-h board
- Add additional CPU OPPs for the H700 on top of existing H616 ones
- Enable DVFS for rg35xx boards
- Add IOMMU for H616 SoC

RISC-V device tree changes
- Add system LDOs to D1s/T113 SoC
- Add ClockworkPi and DevTerm device trees

* tag 'sunxi-dt-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  riscv: dts: allwinner: Add ClockworkPi and DevTerm devicetrees
  riscv: dts: allwinner: d1s-t113: Add system LDOs
  arm64: dts: allwinner: h616: add IOMMU node
  arm64: dts: allwinner: rg35xx: Enable DVFS CPU frequency scaling
  arm64: dts: allwinner: h616: add additional CPU OPPs for the H700
  arm64: dts: allwinner: anbernic-rg35xx-h: Add ADC joysticks
  arm64: dts: allwinner: h616: Add GPADC device node
  dt-bindings: clock: sun50i-h616-ccu: Add GPADC clocks
  ARM: dts: sunxi: remove duplicated entries in makefile
  arm64: dts: allwinner: Add cache information to the SoC dtsi for H616
  arm64: dts: allwinner: Add cache information to the SoC dtsi for A64
  arm64: dts: allwinner: Correct the model names for Pine64 boards
  dt-bindings: arm: sunxi: Correct the descriptions for Pine64 boards
  arm64: dts: allwinner: Add cache information to the SoC dtsi for H6
  ARM: dts: sun50i: Add LRADC node
  dt-bindings: input: sun4i-lradc-keys: Add H616 compatible

Link: https://lore.kernel.org/r/ZoQa8r1N8yi7FlPV@wens.tw
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2024-07-08 16:30:23 +02:00
Arnd Bergmann
b85aad3db1 i.MX arm64 device tree change for 6.11: 
- New board support: imx8mm-iot-gateway, imx93-9x9-qsb, imx95-19x19-evk,
   imx8mp-tqma8mpql-mba8mp-ras314, etc.
 - A series from Adam Ford that improves imx8mp-beacon-kit support by
   fixing dtschema issues and enabling HDMI bridge HPD
 - A set of changes from Alexander Stein that adds partitions subnode
   to spi-nor
 - A great number of changes from Frank Li that add audio, flexcan, gpmi
   related devices for imx8dxl, imx8qm based boards
 - A bunch of layerscape dtschema issue fixes from Frank Li
 - A series from Krzysztof Kozlowski to use defines for interrupts
 - A number of improvements on i.MX8MP DHCOM devices from Marek Vasut
 - A couple of changes from Parthiban Nallathambi that add PCIe PHY and
   RS232/RS485 overlays for phygate-tauri-l board
 - A series from Shengjiu Wang that adds bt-sco and XCVR sound card
   support for imx8mp-evk
 - A series from Tim Harvey that fixes dt-schema warnings and adds DP83867
   configuration for i.MX8M Venice devices
 - Other random feature additions and improvments on various boards
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmaEB9sUHHNoYXduZ3Vv
 QGtlcm5lbC5vcmcACgkQUFdYWoewfM50fQf+LLdjIw/Y2qL1nGtONR2ztD2pykGf
 8EDXlEjYBKPgnEqm9Fx04KNlITG4rVZx8vPODTWqbgg/LMyxhoT5oc79Y3cgPU2N
 +mLYEWWS4M5tCbBsPyM2eVGCGlL6ljU9oAzpCOjeKCWcoALfAKw0Ra0McSDcmnUW
 numO5gynIJtMk8Vn7bxoOwbdNFWPY+egT9VQiWYz3SQzxND5nDfzO4sWNvZ8A5h2
 6lScii47uZd4LOiZy9fijX2xxm8Hc4VXvJyiN+pNcWWlxc/tAzwvq28/xoZcUu90
 pK9l3ZYyuUumKEaCc9up7BqNV3KuYpcodk7tufSzuqtSYnVenQU81xZUgA==
 =JIHm
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmaL95oACgkQYKtH/8kJ
 Uif1aQ/6AyIOvlb9LohxzMkR7DXjiPYp3yjOuAJm9+afLfQ7m5eHhF+F0MUVlhCp
 Kcrc+XoYBjxYKjNg09GiWSywZH6dqn0vcBjdTmLXHuiQAovalv6uuIIS3mk3uYVw
 x0/FvrWVdBXoOB5c6jmQip4tuyacMzQseDBe7Bejw5YOEZ0havrZ+cGwxCHrmWzT
 ngsw5IBRs/ItljyP0w9kkgLaXw6UAgavB892przfdxbZVR1axLbBI+eKe7pj/nHC
 A1GUv4j/i3rOTNUfMdNgtid+ke2S0awqKEsol8k4WvIWeoD1Pie2pdcLPR0q8oZu
 MR5PPXDNf89wZ5DYDkhDHwmqC01k33EIEF2LJQBjSBy6FhsY8EbcZmN+X2wUGpEu
 gPzIxX2AmXkhVIWN0jTxpDhFzSTnhXqHgzAm74xXWuE3/5+hXKX41OgcJrZTpd3n
 z9oRecsVejJc1JTSs+vQOOjVBNL6nwFMH8T8W3UTxDbrQOP0iGVTvN1TeIgtJLkI
 OyNDSN5t9hRsx2rvR6NDTUWqk3DVVSkhZvb/E7Wk4NKO6dNQwbE4qniK7OUMqrVH
 CCze4n3RUJ3R4SM7H+MRDtdB7rtCrxhrD0nXlyoVoM1+dvV9uHO/shAl4Nb+08v1
 ch3Vaet5zv3cGVKAmnn8BceaOtxcmz8iz1mhDubPjGOhrb7I+RU=
 =Orkt
 -----END PGP SIGNATURE-----

Merge tag 'imx-dt64-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt

i.MX arm64 device tree change for 6.11:

- New board support: imx8mm-iot-gateway, imx93-9x9-qsb, imx95-19x19-evk,
  imx8mp-tqma8mpql-mba8mp-ras314, etc.
- A series from Adam Ford that improves imx8mp-beacon-kit support by
  fixing dtschema issues and enabling HDMI bridge HPD
- A set of changes from Alexander Stein that adds partitions subnode
  to spi-nor
- A great number of changes from Frank Li that add audio, flexcan, gpmi
  related devices for imx8dxl, imx8qm based boards
- A bunch of layerscape dtschema issue fixes from Frank Li
- A series from Krzysztof Kozlowski to use defines for interrupts
- A number of improvements on i.MX8MP DHCOM devices from Marek Vasut
- A couple of changes from Parthiban Nallathambi that add PCIe PHY and
  RS232/RS485 overlays for phygate-tauri-l board
- A series from Shengjiu Wang that adds bt-sco and XCVR sound card
  support for imx8mp-evk
- A series from Tim Harvey that fixes dt-schema warnings and adds DP83867
  configuration for i.MX8M Venice devices
- Other random feature additions and improvments on various boards

* tag 'imx-dt64-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (91 commits)
  arm64: dts: imx8mp: Remove 'snps,rx-sched-sp'
  arm64: dts: imx8mm-verdin: add TPM device
  arm64: dts: imx8mp-evk: Add audio XCVR sound card
  arm64: dts: imx8mp: Add audio XCVR device node
  arm64: dts: imx8mp: Update Fast ethernet PHY MDIO addresses to match DH i.MX8MP DHCOM rev.200
  arm64: dts: imx8mp: Do not reconfigure Audio PLL2 on DH i.MX8M Plus DHCOM SoM
  arm64: dts: layerscape: rename b(q)man-portals to b(q)man-portals-bus
  arm64: dts: fsl-ls1046a: rename thermal node name
  arm64: dts: fsl-ls1043a: remove unused clk-name at watchdog node
  arm64: dts: layerscape: rename aux_bus to aux-bus
  arm64: dts: layerscape: change pcie interrupt order
  arm64: dts: layerscape: rename node name "wdt" to "watchdog"
  arm64: dts: layerscape: add #dma-cells for qdma
  arm64: dts: layerscape: remove compatible string 'fsl,fman-xmdio' for fman3
  arm64: dts: layerscape: replace node name 'nor' with 'flash'
  arm64: dts: fsl-ls1012a: remove property 'snps,host-vbus-glitches'
  arm64: dts: fsl-lx2160a: fix #address-cells for pinctrl-single
  arm64: dts: layerscape: add platform special compatible string for gpio
  arm64: dts: layerscape: rename node 'timer' as 'rtc'
  arm64: dts: imx8qxp-mek: Pass memory-region to the DSP node
  ...

Link: https://lore.kernel.org/r/20240702142153.413061-4-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2024-07-08 16:28:41 +02:00
Heiko Stuebner
31390eb8ff arm64: dts: rockchip: add ROCK 5 ITX board 
The ROCK 5 ITX as the name suggests is made in the ITX form factor and
actually built in a form to be used in a regular case even providing
connectors for regular front-panel io.

It can be powered either by 12V, ATX power-supply or PoE.

Notable peripherals are the 4 SATA ports, M.2 M-Key slot, M.2 E-key slot,
2*2.5Gb PCIe-connected Ethernet NICs.

As of yet unsupported display options consist of 2*HDMI, DP via USB-c,
eDP + 2*DSI via PCB connectors.

USB ports are 4*USB3 + 2*USB2 on the back panel and 2-port front-panel
connector.

Schematics for the board can be found on
- https://dl.radxa.com/rock5/5itx/radxa_rock_5_itx_X1100_schematic.pdf
- https://dl.radxa.com/rock5/5itx/v1110/radxa_rock_5itx_v1110_schematic.pdf

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20240704153815.837392-3-heiko@sntech.de
 2024-07-08 16:25:35 +02:00
Diederik de Haas
3087576e1c arm64: dts: rockchip: Add dma-names to uart1 on Pine64 rk3566 devices 
Similar to bf6f26deb0 ("arm64: dts: rockchip: Add dma-names to uart1
on quartz64-b") also add the dma-names property to the other rk3566
devices from Pine64 with bluetooth functionality.

Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Tested-by: Riley Trautman <asonix.dev@gmail.com>
Link: https://lore.kernel.org/r/20240705163004.29678-4-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
 2024-07-08 16:25:35 +02:00
Diederik de Haas
dbdadc14b9 arm64: dts: rockchip: Add avdd supplies to hdmi on rock64 
Pine64's Rock64 was missing the avdd supply properties on the hdmi node,
causing the following warnings:

  dwhdmi-rockchip ff3c0000.hdmi: supply avdd-0v9 not found, using dummy regulator
  dwhdmi-rockchip ff3c0000.hdmi: supply avdd-1v8 not found, using dummy regulator

In the Rock64 Schematic document version 2.0 those supplies are marked
as DVIDEO_AVDD_1V0 and DVIDEO_AVDD_1V8 respectively, but in version 3.0
those are named HDMI_AVDD_1V0 and HDMI_AVDD_1V8, which is a bit clearer.
In both versions those are connected to LDO3 and LDO1 respectively.

While the DeviceTree property is named 'avdd-0v9-supply' the
'rockchip,dw-hdmi.yaml' binding document notes the following:

  A 0.9V supply that powers up the SoC internal circuitry. The actual
  pin name varies between the different SoCs and is usually
  HDMI_TX_AVDD_0V9 or sometimes HDMI_AVDD_1V0.

So the 'vdd_10' reference is not an error.

Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/20240704191919.38856-1-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
 2024-07-08 16:25:35 +02:00
Arnd Bergmann
90a4146de8 Minor improvements in ARM64 DTS for v6.11 
Few cleanups and improvements which were missed by their maintainers:
 1. Spreadtrum: correct PMU nodes - split per clusters.
 2. HiSilicon: add dedicated compatible to syscon node ("syscon" alone is
    not allowed).
 3. APM: add dedicated compatible to syscon node (binding applied to MFD
    tree).
 -----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCgAuFiEE3dJiKD0RGyM7briowTdm5oaLg9cFAmaDoHIQHGtyemtAa2Vy
 bmVsLm9yZwAKCRDBN2bmhouD1xZWD/95r+Bo3H3ioQU60wLIb5av11KqYN0qkk7U
 m77bIEHQ93tPsjyb7AKEmqi2/PuLDY2wNP1hmkTrH2Ctw37yfdhqt/bwnqon3dev
 YK447m2zwybwe6RvaP07jhWxDZiTXnhlJ9TChAQUlpbZNlS09A/revg3MSTJIZr2
 NUcjjE9nbebZkCVd+AEmPi/77pTK3iygc/aCyYp4o56Kai+sY1/GFxZXyt90iqzY
 mRjmAGmhCLPB2sp9YrKixJ9SSEgtwak4hvGO429GI4rXXMM4l+kuWpLxewk7wofP
 I6BPhpBowGGbrU3wb6KXMRGM7aFNCwCX3ukxo+rxGkUx1+00VrMKR5r2SfWZFWG7
 CtjcnH9XztIn9a0R7YFlhd68/XA5M1MouL/lN3lMAkx48iwiM96nBIdq6r2c3rnY
 fuZ6XvAjaJ9au+Hgtnw31rCDA8vGW+Arh6hQLGsumG1jam3v8YjIYWJ46wUn2DVA
 numFFRcY0MCOdBfJaI3rX4DILZ/FkPImdVC5hpjMmYGjkLStvs/GTB76YSElIzEG
 Xl9a/9nJm0g2Mmpze1K9PjVbOz6rVrgJPYj+s09by9UxVQWrwzwrGvCB7nm1/mJe
 tMSDU/xPXQG1mZI8oYCoivRrKN58NHcZbPiqdT9d2KGf2wOf9b2VcAcBcu7CPJ4z
 eg8bkmiNDg==
 =+vkm
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmaL9rcACgkQYKtH/8kJ
 UicDKQ//RovmlFRDYZhaOu+KM/cVkix3brsS9BXFRdYDHEl8MUwukZqY7JMJRHnZ
 5Fo9peK/qsQ2P/XJhBwg/yWtbnOdWAbAmwe5qNGqDV+kjXjgNHput4tC+fKXKat6
 NhNo3JO+PBYrSiBSv8oL8OAToO39jXUmTB9bJgzRUYDeIiEhmu186O9Kp/0DGrs0
 KtFd+hO1NOTpsquaZY/RtCdsJHqZd++oneYM8VEeqibOfQa1YiWWSY1KrveZQIIo
 uTn7FRuGjfJM6OeeKiUh2BM7GlwmzPOjzF1JiaObPCHUeeLOg0/sQfiBPulfWPNb
 u9VZv6zdBpp/5owvLmYa4qjMBHqqEYpsus9xE/vVBxW0KJKMeMWU+1MczYEWLhs7
 X3k0fuaUYHwEk/2EVLNKVT99wpfoSMMgwBZQ+PD1eDVyR5aReAskZgRvj8Jf2Aic
 6LhL7Rk3E/GHsqZWtl6Th1mJY8gfYgrF0KED48SDEU9Ph2QLeySwku1VuZ7jH1Ym
 r0xSWyu/eCGqhSoXvbes6hXa8QcFStUjhWY1oJ+BHmv6JvGAPn818vKlVMYDttrs
 JCEIYJM2E/IHLIvv0x5hTgtLapENHmVVz8AxGJ0iNL7TNCEPwpdQ/95NbLWAzjf9
 4g6gzDVKflh44KBNoNYBAhIPNdryFke1sY/xFIQ+fzkyhtZ5tv8=
 =UGMh
 -----END PGP SIGNATURE-----

Merge tag 'dt64-cleanup-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into soc/dt

Minor improvements in ARM64 DTS for v6.11

Few cleanups and improvements which were missed by their maintainers:
1. Spreadtrum: correct PMU nodes - split per clusters.
2. HiSilicon: add dedicated compatible to syscon node ("syscon" alone is
   not allowed).
3. APM: add dedicated compatible to syscon node (binding applied to MFD
   tree).

* tag 'dt64-cleanup-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt:
  arm64: dts: apm: Add dedicated syscon poweroff compatibles
  arm64: dts: hisilicon: hi3660: add dedicated hi3660-usb3-otg-bc compatible
  dt-bindings: soc: hisilicon: document hi3660-usb3-otg-bc
  arm64: dts: sprd: Split PMU nodes for heterogeneous CPUs

Link: https://lore.kernel.org/r/20240702065359.7378-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2024-07-08 16:24:55 +02:00
Arnd Bergmann
c36a19ed7e Samsung DTS ARM64 changes for v6.10 
1. Google GS101: Minor cleanup and add fake regulators to USB phy, to
    satisfy dtbs_check.  The PMIC providing these regulators is not yet
    implemented.
 
 2. Exynos850: Add True Random Number Generator.
 -----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCgAuFiEE3dJiKD0RGyM7briowTdm5oaLg9cFAmaDnzkQHGtyemtAa2Vy
 bmVsLm9yZwAKCRDBN2bmhouD1+DCEACQ4QFZWkBZimCpTOacg9GHBCHgcYgQ5OGS
 Z7gOsDcSHUYBgSPmo5hEtt0Y3qalCNgQz914ozqkpCwlF2SZCpiTTrk7Eou86jQ/
 VOUiG3k49Crw3QAzhAVW/xw4+tsFO5oRDL7Z06pPIfO5QjFF9Ass+mfW+aXIQ+X3
 +jG7+ms4hY9n6X8+a4sCQ+E1TFo2L9cJp/AyMnBDGXYeRNs/o+lYLxggW8CzIRAz
 jMRELQ/qyMgNupnZpALe4uxbNQ3M5/dgiwx3yV+8c5gx6YcgMBtsktI5b/X6Yu7W
 Dfe9EFBmPYBdD0zSlM0tZBPzLkuvv9InV+NTRN5JlstVPeR0YIu1Qf3UfDP3ay1f
 U6eXCu91XxGt+zGPCsjzVxKMll2HYb9VZ8NF5VvxWUHlk81cJ6aKJTUF2fBKJjbk
 6FNFALncrX7RQagZW1wfq2cKMHsXvh86QQAwt9hihdsmOwwq3E9wKWqLxa6mak70
 i1fYa18xBaFUsaxRgqWW7HPx1ma62P294lGsbSp6wS5nM0kaqfZkfFuh5Xw8mYpJ
 Z+L86pnfT/f6I3ljqjm4rQ7bI697ZhG2P1snIhb0PjXuY18hGtv+bNVum02SF9aO
 IimG55wSBvxHF9ZjvZplQfpbrvpy6uMc18hie/2DrsKQkX6xJL7RI2QH8HZyFlma
 UKIc88whoA==
 =Oc6g
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmaL9n8ACgkQYKtH/8kJ
 UiePdxAA1MDnDBAbOckYjqhSNZd4dJBrzgb9ryufoPoBfA3rfn4cvB72b4jUR6KO
 JWJtbbzpFmIyxUn3hNyQF0DfhrW6Vy2icmxZ+z8C3qZR9g0QnSAhhfZ7Pusf55G8
 rVPT3Ie8PeBLnmf26r3OSt6J21W1f6aCrK46wpowdTCe54vBsMlBrsLE1M92+ubO
 GamrvCehsHDBX9qVeV6e2I70zLtyYdoFddV0ZurgQu9Dox+1IZH1dZ/x5LMudoI1
 wPcMYwwPdUcnC8fQ8MDEYz6pd0BJzJ22RW5ZybtshDlWbcbG/WBkYgMqhZQCcHfD
 uF0zp2WufUX0zXt/q+FYm9Nqye6cOqJDmwZCP07xQWYU4vovTwmrKRdWlcT2pqQ6
 8eA9q+hBAWmSyuutS/4s14YUzRZRdIm4n9t/uOn7A1ducCjtSZftoW32zxEomyIy
 MQS75D8aso+vXmcddPSptoJ3Xc4M5I0TJ58n3y9AF0ZO4G6gQcGvM9jw4yGF72Ge
 WNqoM/MNwT/UzI42AZsbnBpKiW21vwyhxDjzjX202aN3CLiH5HQNgWBiZfDcrDgf
 8aY4t59PHbe8vtVjnLuuiBWNt5jhPi7u+HrRSd0BJkeAy1dooYRWRkHta/+ZxVOR
 ccAtKuSsHo1Ok1QCAple9RP3riMQdsLzeGXzMyIJqm7lzTaBZJI=
 =SKUS
 -----END PGP SIGNATURE-----

Merge tag 'samsung-dt64-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt

Samsung DTS ARM64 changes for v6.10

1. Google GS101: Minor cleanup and add fake regulators to USB phy, to
   satisfy dtbs_check.  The PMIC providing these regulators is not yet
   implemented.

2. Exynos850: Add True Random Number Generator.

* tag 'samsung-dt64-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  arm64: dts: exynos850: Enable TRNG
  arm64: dts: exynos: gs101-oriole: add placeholder regulators for USB phy
  arm64: dts: exynos: gs101: reorder properties as per guidelines

Link: https://lore.kernel.org/r/20240702063514.6215-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2024-07-08 16:23:59 +02:00
Arnd Bergmann
cdb3f6ba4b arm64: tegra: Device tree changes for v6.11-rc1 
This contains one patch that reworks the device tree structure for
 Jetson Orin NX and Jetson Orin Nano, which are both within the same
 family. This restructuring makes it easier to extend both platforms
 in a consistent way in the future.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAmZ+3YsACgkQ3SOs138+
 s6E6qg//eJu9trfH6Tgqvga/YDV98jLHXl6mbjk1zpYOE6K51gM2E9ypaU2Xaefz
 uwZwKe4rDs9GPeKzm2lyd9hHvYUSgzQ5JYfkw8a9G3Ne8E+fbZZ//ElGrUAAbKbd
 C6uN/uXg5udsiTKuXMf/PSAzyvUbUJOY4DC7CA4ilu0GO3pmtafpcaBPvUAWGqDR
 IWVJGFjlYNPWB+ROmyhTYCtpDQX/4Ok5JgjLyOiSzYq/qBZ3AA1OaZW9u10nbcH+
 cBeCBjt/0Pd1bqSxgPwdSxztR6EdmA34zAhi77rJ5shjfR/lqEntwZabg7SezTXK
 ZiduASpTr95kHWdJ6+v25Dj0JzXG8b/9KV6WDMhBY6SBQDiJoWwsGaRcMjbAolHN
 0t58Y/h8mlSREbQc1Yrd9Gk6g/Z9tSfa0TJ3bY4I+squw01Xtl3zB0kw8dBPKMU6
 d5YoTci5QCpih9r7fQ+6YCOA2/QcSxpFURa0Hlm7MjGPRpkmaOt8ZhrfdkFs97mG
 H9I1KZ4URX7YwVahvO6G+bRSJLvJNqO3IwZIk/vbCOZQCyXz2RX7vHKN9J734ZBA
 ThtdTvYCDBo0B70h/SAQYza3o40+WXHaDiEUbDa+3ExGOL0vg6hIzoLB5Gyc56CY
 xKlaDeJUX2XcPoZ11feLbvYu0ylCThmsP/DR7t+qgfkqYfMM8Dw=
 =+CSv
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmaL9gIACgkQYKtH/8kJ
 UicCFBAA5AQQaTZ7ru6bZnGMPMphO26fYTWokqLuRtky3Js6+MD8z6E9CE+KAqMe
 uETX2ANP3yjIWRKO0ktRndckdA5IzOcyOP9Dp2VuQyuc6OCk7RU2gOvepazYgIu1
 JTP/cjka+UwG6asCSQx8+5Ly00RZOTGoVfjfgu48gB3mE3tWPLN0L5C5MzqT4RgY
 AQ4PWogpyj3GDq82eZtd3cXs+oTuz20x240pwZME9fP7Kja0dyp2Jm5ZrkrIcO+B
 vV73MZM8eK2nePnpMC+2pUvvB9xH1/MJsaeJT6uz6RN6plex4MabobeZMrjhnPIG
 43AaLMM7FMyfjW8hD0b8tQKyda3kXqsYsg/SlVqrA0d92XU//zTWLd7+EeJmEqsf
 TxjmEKkgwK5tDnwuptnfnZLfvwXPRPqs5X6E+dXTUpTXFsXTTpXDvu3Tjn+B0prC
 nk4PQBdHKPGxc2PY1L1uscPpGVjMSGjHAaXqIeup6BOuXoptorUCSzl6jKOiNlIc
 787kqtlIgE/s0cdUjW2ma1oVhMJZcgAoxJi9UJoQ0ZzwBaBRaMhWYP+J19yGPx4D
 joLmFFLH3M2sNQC+sFpL+aWtx+1/EShAJ6W3Bqt6yZ3DXyjyi35+Z2vlq31NMIT2
 gDwWLFK+fa/t0mPzmtlmtO0nlUaISxZjr9jTs1Szwkro+Ik/SNo=
 =CUSX
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-6.11-arm64-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt

arm64: tegra: Device tree changes for v6.11-rc1

This contains one patch that reworks the device tree structure for
Jetson Orin NX and Jetson Orin Nano, which are both within the same
family. This restructuring makes it easier to extend both platforms
in a consistent way in the future.

* tag 'tegra-for-6.11-arm64-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  arm64: tegra: Restructure Orin NX/Nano device tree

Link: https://lore.kernel.org/r/20240628210818.3627404-3-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2024-07-08 16:21:54 +02:00
Arnd Bergmann
74de3f227e Allwinner fixes for 6.10 
- Fix PMIC interrupt number for Remix Mini PC
 -----BEGIN PGP SIGNATURE-----
 
 iQJCBAABCgAsFiEE2nN1m/hhnkhOWjtHOJpUIZwPJDAFAmaC4bkOHHdlbnNAY3Np
 ZS5vcmcACgkQOJpUIZwPJDDu2RAA3q3WzjUnNuiJw6oHBQ9lsA9M3A1OLaU4RszS
 QK8fSab4XWXti07xpZKTH0kcvUapWVVbociKj3glwJe+cCdr88tCmOFxcUBF4R/x
 kffrSRDcD/ext3vbmszSTCnZp+qcfcDyyHYdNVrpwuv1aISu90RLBSmUPqoI0OM5
 XsIgA5QM6MKymFj45pkkL1P74xVfg4vaGwqIa3CBQm3pb+HJrdfbFKjIUvRD/8/x
 ty/1KkNGKSNRCpv3d3G1C4/CRVrQ6x1HE8B06LPzXhfUNs+FDWQN24KBL4ayXbD7
 KrLx2HJQkh8I8t6txtD71FcM+54w3SZ58KpbJTiFefH7ridp4lekNbGv2iT3igWK
 tbrYuXwiYW4rzSJQqN3X0KYmeUOa23EpyPWUPKSW29u7yQvlTXW5hgyT936uP/D8
 nYfARtuLgGJNnoiyXCM14o1GtRm5FaSltjKzGkdKbrB2ceLtqUgSjv0WWeFzTI8j
 Xp7thQJqopsmd25ZEzNSy0dIWaBQx0yyrYBATwwV7jrxuh0mBCqyyPWuq5RZ7bhQ
 Z2co9L74KaEIzxR3MfkoFsnTPv/Q7k6OUjbDnzauTvk44EyzUZK+AjJ07BI8nPes
 pjPraHqL4kX6BowauTNy5+ch6GshZesfjr8vmCccNG1+fyTIA1iABjUgPl0y4hPt
 ndK5K94=
 =woAy
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmaL9PMACgkQYKtH/8kJ
 Uifp+BAA0XJEZ0vdGzbFAkIs2hXLqQFUldi0JZAotxLmXz3INCrXkKdnN9o0THon
 01moV9A5q4c+tfqpyTSTN4eQOCf331JitiOwmZCfweL/wsYYKsCuFLQt+RPaNT6Y
 61/vycgvSOuYRinrkBmjNHyHbXtk0QtEYpSO2n2OA9HfwzZV+LbMHm4KSEX995sa
 ZN9F0X7GVNSUOeD+m+Uim6QpKBWZfOsrlFAS21lKrYMc/ja17Uo7EFOgLNerEJkX
 aAduFsvemnCujJYguAfVggPGtY8b1vPv3qB+GwGFsH5UrRXhHM0O+VWXpyNHI92v
 7iV0yavckJp4dL01/aQlLkizgk8BRuEY17tk6I2RiReTon0vheVaiEbIQMh/MkhP
 HQbK93d6KUvNHiUxftQDA+QHRur3uM4fl/lDcSug9RzF55adArEzAQXfACdJCx93
 cm9+4lF0py0df29lFG/V0aZqRK6TKLC0ZK+7icwl/XfmDi/d1SI4bpXTyuP8MdlB
 nhF3Abv9ZUOHHLnrOuafjYvzA4XHzZaa7ZL7SCeY6ib2Q/446KolOlpAMPNvFk89
 oUqkXhHezgwyBa71QlfqAsE3XplzLnYOvNs1q9LFjC74ONZ1TaAOkQInOaP0mPzS
 UpB6EEgoLa8HB91dV07tYuRvMc58pNWoupO2AMrlzHT49+MyVAQ=
 =+Kc0
 -----END PGP SIGNATURE-----

Merge tag 'sunxi-fixes-for-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes

Allwinner fixes for 6.10

- Fix PMIC interrupt number for Remix Mini PC

* tag 'sunxi-fixes-for-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  arm64: dts: allwinner: Fix PMIC interrupt number

Link: https://lore.kernel.org/r/ZoQY5k21RQLOrBQ3@wens.tw
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2024-07-08 16:17:22 +02:00
Arnd Bergmann
bcec291967 Qualcomm Arm64 DeviceTree fixes for v6.10 
This marks the PSHOLD node on SC8280XP as reserved, to resolve a
 regression where a reset is triggered instead of a clean shutdown. Also
 on SC8280XP the touchscreen properties are adjusted to make it properly
 described on CRD and make it work on the Lenovo Thinkpad X13s.
 
 Corrects the LLCC definitions on SC8180X and QDU1000 to allow these
 drivers and their dependencies to probe.
 
 X1 Elite CRD is given more CMA space, to avoid running out during boot,
 as PCIe SMMU is not accessible.  Audio configuration is corrected, on
 the same.
 
 SM6115 SDHC is given an IOMMU stream, to avoid access issues.
 
 Lastly the EL2 non-secure physical timer interrupt on SA8775P is
 corrected from its previous incorrect value.
 -----BEGIN PGP SIGNATURE-----
 
 iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmaDbysVHGFuZGVyc3Nv
 bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3FjB4P/i8+CZGdqXeUbfX+QuRKr91W9m7H
 NIdya6FZ6bg3RhmrLLlhmyG3iVVQNYvZ1mjAsK43xtnOU2DX/OMrNAUAdmagC5cI
 VfjPGlHKbGmK5rfDfxYNRocszo/zh4CFQQmVElsBSaZyi1pPkfOWnUZjTzlAetS4
 FMbrDjJyFDPxhzdhPZWyAEAd6eeYMbpEeXOB0NZGdsv3ncfg311cBy2MHEn052J9
 lAOexSfhw1hNTMPSfjK/8OKQiAKuA5DWUxZL+/7/5P72zB0GZUCzDJABRRlaWjsM
 d8eJenuHpluRZxSTtmw5uSmBjbKUW6Q3lhMNeVIcxDhyaMNq2Asw3LIiJFAXQmB3
 goQek5Lc33VRAdnw6Vfphzy2nUBAeT5YBl+aGJb8cVR12BKWN0JiVVm1/Ewxd23j
 GcfKTsLSMI1ZPOsjNgtoqa8O6y76vX1c0+Vn5GvG/8iSa5qlzattMD7hWra5erll
 MhlOr3OikH1rhTTlJNc6WPJwmYbnf4DAemUyzvF9oIXZf5J05ljDW7KUBJyFH7ip
 oIfi6JNsuABcDmT2vMFofw2jJwbo6wb1bxUoTYDITRy45GOs44pZAfuxFz5Z0vST
 kGeqqi4xz3JhNTSLDf50ahJBOHapg5C1c+OSZ22muLGl/7Hzpmd2FhdI85e1+arL
 TcF+8NCZBkpcraLa
 =rkld
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmaL9IAACgkQYKtH/8kJ
 UifKORAAmbEROkWShKsTmVk9sl863SUqu3wPOyFUgY0Dw+xsUZum5yk1mxeuJCaE
 3o5EzRerPwAyEcMw3jWXIYmKvwP4ocIMo7FVKLqD4icEteufM6uq03AeTMfkWi6v
 J97zXSrl7lxr3hRnb5NvKm/gUakuHThRAUkzPxccHrgJz2bMbqD/Jz/lKUw+boip
 Yjw/bk0rz+otSEk5uwG39lDP5eJgukH5cAMBo4YnmAd2KKr56TNPjqRCu2XGNHnU
 HnJnw8v9iar3imUH7RlM6XBbdd2YDAe9nAcgHZ11ACVaO9eYtsLVHA4Ms6p3zUPE
 kVtW8NcObc6MDLABc2x5J4lposaPuuVRquchlaPE7UTSidqkq2jvTcME40Mse+lp
 MfoMhHN35FDtogYFVjvD4dmB1Q0bY74YPl9xa+NuymORJcft/Y3dAbInmsRhBdiC
 ifK892Z76m7eob+ul7egNeY2uDitoSpY8GKL41EG98G+u/g93J/kv9wjO0o2JH62
 RDJge8FY38noqLK3GIk3BIXq9730N+Tau9HGn/Lpqt8JWEAbTcgAH/wjXmKl/GkU
 zFSgyRTbiyOx8tLsW9RF3D/YMPyzyhyAnwz03llX+iFXIws4o2LSGQ2u6ESsAXxP
 BQ+XOj2WxGpaRMN8XIrgV08+TZwP6MkqaNK0PRSRAr+JEpRNVio=
 =R3Mv
 -----END PGP SIGNATURE-----

Merge tag 'qcom-arm64-fixes-for-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes

Qualcomm Arm64 DeviceTree fixes for v6.10

This marks the PSHOLD node on SC8280XP as reserved, to resolve a
regression where a reset is triggered instead of a clean shutdown. Also
on SC8280XP the touchscreen properties are adjusted to make it properly
described on CRD and make it work on the Lenovo Thinkpad X13s.

Corrects the LLCC definitions on SC8180X and QDU1000 to allow these
drivers and their dependencies to probe.

X1 Elite CRD is given more CMA space, to avoid running out during boot,
as PCIe SMMU is not accessible.  Audio configuration is corrected, on
the same.

SM6115 SDHC is given an IOMMU stream, to avoid access issues.

Lastly the EL2 non-secure physical timer interrupt on SA8775P is
corrected from its previous incorrect value.

* tag 'qcom-arm64-fixes-for-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  arm64: dts: qcom: qdu1000: Fix LLCC reg property
  arm64: dts: qcom: sm6115: add iommu for sdhc_1
  arm64: dts: qcom: x1e80100-crd: fix DAI used for headset recording
  arm64: dts: qcom: x1e80100-crd: fix WCD audio codec TX port mapping
  arm64: dts: qcom: sc8280xp-crd: use external pull up for touch reset
  arm64: dts: qcom: sc8280xp-x13s: fix touchscreen power on
  arm64: dts: qcom: x1e80100: Fix PCIe 6a reg offsets and add MHI
  arm64: dts: qcom: sa8775p: Correct IRQ number of EL2 non-secure physical timer
  arm64: dts: qcom: sc8280xp: Set status = "reserved" on PSHOLD
  arm64: dts: qcom: x1e80100-*: Allocate some CMA buffers
  arm64: dts: qcom: sc8180x: Fix LLCC reg property again

Link: https://lore.kernel.org/r/20240702030913.340814-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2024-07-08 16:15:28 +02:00
Anton Bambura
88bf3be9c3 arm64: dts: qcom: msm8916-lg-c50: add initial dts for LG Leon LTE 
Add initial device-tree for LG Leon LTE (lg-c50), currently supported
features:
- eMMC;
- MicroSD;
- usb in peripheral mode;
- WiFi/BT;
- vibration;
- keys.

Signed-off-by: Anton Bambura <jenneron@postmarketos.org>
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240623-msm8916-lg-initial-v1-3-6fbcf714d69b@trvn.ru
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
 2024-07-06 17:06:03 -05:00
Cristian Cozzolino
0655b44746 arm64: dts: qcom: msm8916-lg-m216: Add initial device tree 
This commit adds initial support for the LG K10 smartphone.

Support for the following features is included:

- Serial
- Keys
- Battery and charger
- Accelerometer, magnetometer
- Touchscreen
- Sound and modem
- Haptic

Signed-off-by: Cristian Cozzolino <cristian_ci@protonmail.com>
[Nikita: Minor cleanup]
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240623-msm8916-lg-initial-v1-2-6fbcf714d69b@trvn.ru
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
 2024-07-06 17:06:03 -05:00
Varadarajan Narayanan
5d0ab61a70 arm64: dts: qcom: ipq9574: Add icc provider ability to gcc 
IPQ SoCs dont involve RPM in managing NoC related clocks and
there is no NoC scaling. Linux itself handles these clocks.
However, these should not be exposed as just clocks and align
with other Qualcomm SoCs that handle these clocks from a
interconnect provider.

Hence include icc provider capability to the gcc node so that
peripherals can use the interconnect facility to enable these
clocks.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Link: https://lore.kernel.org/r/20240430064214.2030013-7-quic_varada@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
 2024-07-06 13:17:08 -05:00
Satya Priya Kakitapalli
cfe9685473 arm64: dts: qcom: sm8150: Add video clock controller node 
Add device node for video clock controller on Qualcomm
SM8150 platform.

Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240509-videocc-sm8150-dt-node-v4-2-e9617f65e946@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
 2024-07-06 13:08:04 -05:00
Jens Reidel
e3e169cd28 arm64: dts: qcom: pm6150: Add vibrator 
Add a node for the vibrator module found inside the PM6150.

Signed-off-by: Jens Reidel <adrian@travitia.xyz>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240606181027.98537-3-adrian@travitia.xyz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
 2024-07-06 13:06:24 -05:00
Mukesh Ojha
134a4b2f3b arm64: dts: qcom: sc7280: Enable download mode register write 
Enable download mode setting for sc7280 which can help collect
ramdump for this SoC.

Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240705143443.1491956-1-quic_mojha@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
 2024-07-06 13:03:06 -05:00
Luca Weiss
8cf636a032 arm64: dts: qcom: sm7225-fairphone-fp4: Add PM6150L thermals 
Configure the thermals for the PA_THERM1, MSM_THERM, PA_THERM0,
RFC_CAM_THERM, CAM_FLASH_THERM and QUIET_THERM thermistors connected to
PM6150L.

Due to hardware constraints we can only register 4 zones with
pm6150l_adc_tm, the other 2 we can register via generic-adc-thermal.

The trip points can really only be considered as placeholders, more
configuration with cooling etc. can be added later.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20240705-fp4-thermals-v2-2-a4870a8d084f@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
 2024-07-06 13:02:57 -05:00
Luca Weiss
4d37847187 arm64: dts: qcom: sm7225-fairphone-fp4: Add PMK8003 thermals 
Configure the thermals for the XO_THERM thermistor connected to the
PMK8003 (which is called PMK8350 in software).

The ADC configuration for PMK8350_ADC7_AMUX_THM1_100K_PU has already
been added in the past.

The trip points can really only be considered as placeholders, more
configuration with cooling etc. can be added later.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20240705-fp4-thermals-v2-1-a4870a8d084f@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
 2024-07-06 13:02:57 -05:00
Luca Weiss
81008068ee arm64: dts: qcom: sm6350: Add missing qcom,non-secure-domain property 
By default the DSP domains are secure, add the missing
qcom,non-secure-domain property to mark them as non-secure.

Fixes: efc33c969f ("arm64: dts: qcom: sm6350: Add ADSP nodes")
Fixes: 8eb5287e8a ("arm64: dts: qcom: sm6350: Add CDSP nodes")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20240705-sm6350-fastrpc-fix-v2-1-89a43166c9bb@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
 2024-07-06 13:02:05 -05:00
Krishna Kurapati
cf4d6d54ea arm64: dts: qcom: sdm845: Disable SS instance in Parkmode for USB 
For Gen-1 targets like SDM845, it is seen that stressing out the
controller in host mode results in HC died error:

 xhci-hcd.12.auto: xHCI host not responding to stop endpoint command
 xhci-hcd.12.auto: xHCI host controller not responding, assume dead
 xhci-hcd.12.auto: HC died; cleaning up

And at this instant only restarting the host mode fixes it. Disable
SuperSpeed instance in park mode for SDM845 to mitigate this issue.

Cc: stable@vger.kernel.org
Fixes: ca4db2b538 ("arm64: dts: qcom: sdm845: Add USB-related nodes")
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240704152848.3380602-9-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
 2024-07-06 13:00:41 -05:00
Krishna Kurapati
44ea1ae3cf arm64: dts: qcom: msm8996: Disable SS instance in Parkmode for USB 
For Gen-1 targets like MSM8996, it is seen that stressing out the
controller in host mode results in HC died error:

 xhci-hcd.12.auto: xHCI host not responding to stop endpoint command
 xhci-hcd.12.auto: xHCI host controller not responding, assume dead
 xhci-hcd.12.auto: HC died; cleaning up

And at this instant only restarting the host mode fixes it. Disable
SuperSpeed instance in park mode for MSM8996 to mitigate this issue.

Cc: stable@vger.kernel.org
Fixes: 1e39255ed2 ("arm64: dts: msm8996: Add device node for qcom,dwc3")
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240704152848.3380602-8-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
 2024-07-06 13:00:41 -05:00
Krishna Kurapati
c5d57eb7d0 arm64: dts: qcom: sm6350: Disable SS instance in Parkmode for USB 
For Gen-1 targets like SM6350, it is seen that stressing out the
controller in host mode results in HC died error:

 xhci-hcd.12.auto: xHCI host not responding to stop endpoint command
 xhci-hcd.12.auto: xHCI host controller not responding, assume dead
 xhci-hcd.12.auto: HC died; cleaning up

And at this instant only restarting the host mode fixes it. Disable
SuperSpeed instance in park mode for SM6350 to mitigate this issue.

Cc: stable@vger.kernel.org
Fixes: 23737b9557 ("arm64: dts: qcom: sm6350: Add USB1 nodes")
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240704152848.3380602-7-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
 2024-07-06 13:00:41 -05:00
Krishna Kurapati
074992a116 arm64: dts: qcom: sm6115: Disable SS instance in Parkmode for USB 
For Gen-1 targets like SM6115, it is seen that stressing out the
controller in host mode results in HC died error:

 xhci-hcd.12.auto: xHCI host not responding to stop endpoint command
 xhci-hcd.12.auto: xHCI host controller not responding, assume dead
 xhci-hcd.12.auto: HC died; cleaning up

And at this instant only restarting the host mode fixes it. Disable
SuperSpeed instance in park mode for SM6115 to mitigate this issue.

Cc: stable@vger.kernel.org
Fixes: 97e563bf5b ("arm64: dts: qcom: sm6115: Add basic soc dtsi")
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240704152848.3380602-6-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
 2024-07-06 13:00:41 -05:00
Krishna Kurapati
fad58a41b8 arm64: dts: qcom: sdm630: Disable SS instance in Parkmode for USB 
For Gen-1 targets like SDM630, it is seen that stressing out the
controller in host mode results in HC died error:

 xhci-hcd.12.auto: xHCI host not responding to stop endpoint command
 xhci-hcd.12.auto: xHCI host controller not responding, assume dead
 xhci-hcd.12.auto: HC died; cleaning up

And at this instant only restarting the host mode fixes it. Disable
SuperSpeed instance in park mode for SDM630 to mitigate this issue.

Cc: stable@vger.kernel.org
Fixes: c65a4ed2ea ("arm64: dts: qcom: sdm630: Add USB configuration")
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240704152848.3380602-5-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
 2024-07-06 13:00:41 -05:00