Orangefs has no open, and orangefs checks file permissions
on each file access. Posix requires that file permissions
be checked on open and nowhere else. Orangefs-through-the-kernel
needs to seem posix compliant.
The VFS opens files, even if the filesystem provides no
method. We can see if a file was successfully opened for
read and or for write by looking at file->f_mode.
When writes are flowing from the page cache, file is no
longer available. We can trust the VFS to have checked
file->f_mode before writing to the page cache.
The mode of a file might change between when it is opened
and IO commences, or it might be created with an arbitrary mode.
We'll make sure we don't hit EACCES during the IO stage by
using UID 0. Some of the time we have access without changing
to UID 0 - how to check?
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
There are 3 remaining files without an extension inside the fs docs
dir.
Manually convert them to ReST.
In the case of the nfs/exporting.rst file, as the nfs docs
aren't ported yet, I opted to convert and add a :orphan: there,
with should be removed when it gets added into a nfs-specific
part of the fs documentation.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Unused Value that colin.king@canonical.com sent me and a
related fix I added.
-----BEGIN PGP SIGNATURE-----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=PJuy
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.3-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux
Pull orangefs updates from Mike Marshall:
"Two small fixes.
This is just a fix for an unused value that Colin King sent me and a
related fix I added"
* tag 'for-linus-5.3-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
orangefs: eliminate needless variable assignments
orangefs: remove redundant assignment to variable buffer_index
The variable buffer_index is being initialized however this is never
read and later it is being reassigned to a new value. The initialization
is redundant and hence can be removed.
Addresses-Coverity: ("Unused Value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Create a generic function to check incoming FS_IOC_SETFLAGS flag values
and later prepare the inode for updates so that we can standardize the
implementations that follow ext4's flag values.
Note that the efivarfs implementation no longer fails a no-op SETFLAGS
without CAP_LINUX_IMMUTABLE since that's the behavior in ext*.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: David Sterba <dsterba@suse.com>
Reviewed-by: Bob Peterson <rpeterso@redhat.com>
->readpage looks in file->private_data to try and find out how the
userspace program set "count" in read(2) or with "dd bs=" or whatever.
->readpage uses "count" and inode->i_size to calculate how much
data Orangefs should deposit in the Orangefs shared buffer, and
remembers which slot the data is in.
After copying data from the Orangefs shared buffer slot into
"the page", readpage tries to increment through the pagecache index
and fill as many pages as it can from the extra data in the shared
buffer. Hopefully these extra pages will soon be needed by the vfs,
and they'll be in the pagecache already.
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Martin Brandenburg <martin@omnibond.com>
When userspace deposits more than a page of data into the shared buffer,
we'll need to know which slot it is in when we get back to readpage
so that we can try to use the extra data to fill some extra pages.
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Orangefs wins when it can do IO on large (up to four meg) blocks at a time,
and looses when it has to do tiny "small io" reads and writes. Accessing
Orangefs through the pagecache with the kernel module helps with small io,
both reading and writing, a great deal. Readpage generally tries to fetch a
page (four k) at a time. We'll let users use "count" (as in read(2) or
pread(2) for example) as a knob to control how much data they get from
Orangefs at a time and we'll try to use the data to fill extra
pagecache pages when we get to ->readpage, hopefully resulting in
fewer calls to readpage and Orangefs userspace.
We need a way to remember how they set count so that we can still have
it available when we get to ->readpage.
- We'll use file->private_data to keep track of "count".
We'll wrap generic_file_open with orangefs_file_open and
initialize private_data to NULL there.
- In ->read_iter we have access to both "count" and file, so
we'll kmalloc some space onto file->private_data and store
"count" there.
- We'll kfree file->private_data each time we visit ->flush and
reinitialize it to NULL.
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Martin Brandenburg <martin@omnibond.com>
This is modeled after NFS, except our method is different. We use a
simple timer to determine whether to invalidate the page cache. This
is bound to perform.
This addes a sysfs parameter cache_timeout_msecs which controls the time
between page cache invalidations.
Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Go through pages and look for a consecutive writable region. After
finding a number of consecutive writable pages or when finding that
the next page's dirty range is not contiguous and cannot be written
as one request, send the write to the server.
The number of pages is determined by the client-core's buffer size.
Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Attach the actual range of bytes written to plus the responsible uid/gid
to each dirty page. This information must be sent to the server when
the page is written out.
Now write_begin, page_mkwrite, and invalidatepage keep up with this
information. There are several conditions where they must write out the
page immediately to store the new range. Two non-contiguous ranges
cannot be stored on a single page.
Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Without this, an fsync call is sent to the server even if no data
changed. This resulted in a rather severe (50%) performance regression
under certain metadata-heavy workloads.
In the past, everything was direct IO. Nothing happend on a close call.
An explicit fsync call would send an fsync request to the server which
in turn fsynced the underlying file.
Now there are cached writes. Then fsync began writing out dirty pages
in addition to making an fsync request to the server, and close began
calling fsync.
With this commit, close only writes out dirty pages, and does not make
the fsync request.
Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
direct_IO was the only caller and all direct_IO did was call it,
so there's no use in having the code spread out into so many functions.
Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Now orangefs_inode_getattr fills from cache if an inode has dirty pages.
also if attr_valid and dirty pages and !flags, we spin on inode writeback
before returning if pages still dirty after: should it be other way
Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Remove orangefs_inode_read. It was used by readpage. Calling
wait_for_direct_io directly serves the purpose just as well. There is
now no check of the bufmap size in the readpage path. There are already
other places the bufmap size is assumed to be greater than PAGE_SIZE.
Important to call truncate_inode_pages now in the write path so a
subsequent read sees the new data.
Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
This should be a no-op now, but once inode writeback works, it'll be
necessary to have the correct attribute in the dirty inode.
Previously the attribute fetch timeout was marked invalid and the server
provided the updated attribute. When the inode is dirty, the server
cannot be consulted since it does not yet know the pending setattr.
Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
No need to store the received mask. It is either STATX_BASIC_STATS or
STATX_BASIC_STATS & ~STATX_SIZE. If STATX_SIZE is requested, the cache
is bypassed anyway, so the cached mask is unnecessary to decide whether
to do a real getattr.
This is a change. Previously a getattr would want size and use the
cached size. All of the in-kernel callers that wanted size did not want
a cached size. Now a getattr cannot use the cached size if it wants
size at all.
Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Use new return type vm_fault_t for fault handler. For now,
this is just documenting that the function returns a VM_FAULT
value rather than an errno. Once all instances are converted,
vm_fault_t will become a distinct type.
See the following
commit 1c8f422059 ("mm: change return type to vm_fault_t")
Fixed checkpatch.pl warning.
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
The struct orangefs_file_vm_ops is local to the source and does not need
to be in global scope, so make it static.
Cleans up sparse warning:
fs/orangefs/file.c:547:35: warning: symbol 'orangefs_file_vm_ops' was not
declared. Should it be static?
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Must retrieve size before running filemap_fault so the kernel has
an up-to-date size.
This should have been caught by xfstests generic/246, but it was masked
by orangefs_new_inode, which set i_size to PAGE_SIZE. When nothing
caused a getattr prior to a pagefault, i_size was still PAGE_SIZE.
Since xfstests only read 10 bytes, it did not catch this bug.
When orangefs_new_inode was modified to perform a getattr instead,
i_size was set to zero, as it was a newly created file. Then
orangefs_file_write_iter did NOT set i_size. Instead it invalidated the
attribute cache, which should have caused the next caller to retrieve
i_size. But the fault handler did not know it was supposed to retrieve
i_size. So during xfstests, i_size was still zero, and filemap_fault
returned VM_FAULT_SIGBUS.
Fixes xfstests generic/452.
Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
After do_readv_writev, the inode cache is invalidated anyway, so i_size
will never be read. It will be fetched from the server which will also
know about updates from other machines.
Fixes deadlock on 32-bit SMP.
See https://marc.info/?l=linux-fsdevel&m=151268557427760&w=2
Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Mike Marshall <hubcap@omnibond.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The previous code path was to mark the inode dirty, let
orangefs_inode_dirty set a flag in our private inode, then later during
inode release call orangefs_flush_inode which notices the flag and
writes the atime out.
The code path worked almost identically for mtime, ctime, and mode
except that those flags are set explicitly and not as side effects of
dirty.
Now orangefs_flush_inode is removed. Marking an inode dirty does not
imply an atime update. Any place where flags were set before is now
an explicit call to orangefs_inode_setattr. Since OrangeFS does not
utilize inode writeback, the attribute change should be written out
immediately.
Fixes generic/120.
In namei.c, there are several places where the directory mtime and ctime
are set, but only the mtime is sent to the server. These don't seem
right, but I've left them as is for now.
Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Orangefs doesn't do buffered writes yet, so there's no point in
initiating and waiting for writeback.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
remove unused get_fsid_from_ino
fix bounds check for listxattr
clean up oversize xattr validation
do not set getattr_time on orangefs_lookup
return from orangefs_devreq_read quickly if possible
do not wait for timeout if umounting
handle zero size write in debugfs
Bug fixes:
do not check possibly stale size on truncate
ensure the userspace component is unmounted if mount fails
total reimplementation of dir.c
New feature:
implement statx
The new implementation of dir.c is kind of a big deal, all new
code. It has been posted to fs-devel during the previous rc period,
we didn't get much review or feedback from there, but it has been reviewed
very heavily here, so much so that we have two entire versions of the
reimplementation. Not only does the new implementation fix some
xfstests, but it passes all the new tests we made here that involve
seeking and rewinding and giant directories and long file names.
The new dir code has three patches itself:
skip forward to the next directory entry if seek is short
invalidate stored directory on seek
count directory pieces correctly
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJZDLasAAoJEM9EDqnrzg2+yR4P/jNsryNfQush5V/6EO+wpQ7p
O0epuLG42QMN67wdsQDVOOzcRQq2IAoYrgupZfEvCVsoBiYxdCTTwhN/55UctMBA
xnakv8BarrLd6pqSJOlQviP7ByXdEvy7dtYYuAEtdRnPtTZEmjDH0k9ME759+DVm
pPQ6fanPzSZuG8fdjI4QrKiFfpE5slMeyMV9SmzIq81S1i+t2b9sDYKTiP3Jt14y
KTweGdJXTRT+Piy27d80HN9ExlFXlcyru9GDWNhZi4EHlax7bq76Qwu1XKyaOg0h
MN40+18k+Zqrpj1/tq4aj3YM0P3HjpRhtb5TqOC+QhZDIL1gJ8bv8rv61snWTak+
6cXtwvIh7r4aEU+gkMLP29HXCVlGg3V4up+DdbHJVbIEXV8C5csJBP+sQUlU7A5D
WoPmheV7CJ8nicwkxYm31dhdnW7mOwW/J4uUlM9w/yU/dVfoz1SK8AtKjy0xX87c
Jpo7nuJEDprI+9neT0y5U+RHVqH08+cA5DCrdk0x8JaJIrjOZpvTROIPrtzlS7QL
aTu+W/ISXtFwnM+ERmw8TKPD7TTUXypydYhzXe8V6itDpiNp1kQFGmLGzLhAMElH
iGQkFatR6LSKh+DxUD3PREQGNyQCKpgPiqLoGYprzQ829tqLpThumfZic9lX1C/+
we5VEpRbiz6BjN110DBJ
=NGTt
-----END PGP SIGNATURE-----
Merge tag 'for-linus-4.12-ofs-1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux
Pull orangefs updates from Mike Marshall:
"Orangefs cleanups, fixes and statx support.
Some cleanups:
- remove unused get_fsid_from_ino
- fix bounds check for listxattr
- clean up oversize xattr validation
- do not set getattr_time on orangefs_lookup
- return from orangefs_devreq_read quickly if possible
- do not wait for timeout if umounting
- handle zero size write in debugfs
Bug fixes:
- do not check possibly stale size on truncate
- ensure the userspace component is unmounted if mount fails
- total reimplementation of dir.c
New feature:
- implement statx
The new implementation of dir.c is kind of a big deal, all new code.
It has been posted to fs-devel during the previous rc period, we
didn't get much review or feedback from there, but it has been
reviewed very heavily here, so much so that we have two entire
versions of the reimplementation.
Not only does the new implementation fix some xfstests, but it passes
all the new tests we made here that involve seeking and rewinding and
giant directories and long file names. The new dir code has three
patches itself:
- skip forward to the next directory entry if seek is short
- invalidate stored directory on seek
- count directory pieces correctly"
* tag 'for-linus-4.12-ofs-1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
orangefs: count directory pieces correctly
orangefs: invalidate stored directory on seek
orangefs: skip forward to the next directory entry if seek is short
orangefs: handle zero size write in debugfs
orangefs: do not wait for timeout if umounting
orangefs: return from orangefs_devreq_read quickly if possible
orangefs: ensure the userspace component is unmounted if mount fails
orangefs: do not check possibly stale size on truncate
orangefs: implement statx
orangefs: remove ORANGEFS_READDIR macros
orangefs: support very large directories
orangefs: support llseek on directories
orangefs: rewrite readdir to fix several bugs
orangefs: do not set getattr_time on orangefs_lookup
orangefs: clean up oversize xattr validation
orangefs: fix bounds check for listxattr
orangefs: remove unused get_fsid_from_ino
Fortunately OrangeFS has had a getattr request mask for a long time.
The server basically has two difficulty levels for attributes. Fetching
any attribute except size requires communicating with the metadata
server for that handle. Since all the attributes are right there, it
makes sense to return them all. Fetching the size requires
communicating with every I/O server (that the file is distributed
across). Therefore if asked for anything except size, get everything
except size, and if asked for size, get everything.
Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Replace wrong use of file->f_path.dentry->d_inode with file_inode(file).
In case orangefs ever finds itself as an overelayfs layer, it would want
to get its own inode and not overlayfs's inode.
DISCLAIMER: I did not test this patch because I do not know how to setup
an orangefs mount
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Pull more vfs updates from Al Viro:
">rename2() work from Miklos + current_time() from Deepa"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: Replace current_fs_time() with current_time()
fs: Replace CURRENT_TIME_SEC with current_time() for inode timestamps
fs: Replace CURRENT_TIME with current_time() for inode timestamps
fs: proc: Delete inode time initializations in proc_alloc_inode()
vfs: Add current_time() api
vfs: add note about i_op->rename changes to porting
fs: rename "rename2" i_op to "rename"
vfs: remove unused i_op->rename
fs: make remaining filesystems use .rename2
libfs: support RENAME_NOREPLACE in simple_rename()
fs: support RENAME_NOREPLACE for local filesystems
ncpfs: fix unused variable warning
Pull misc vfs updates from Al Viro:
"Assorted misc bits and pieces.
There are several single-topic branches left after this (rename2
series from Miklos, current_time series from Deepa Dinamani, xattr
series from Andreas, uaccess stuff from from me) and I'd prefer to
send those separately"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (39 commits)
proc: switch auxv to use of __mem_open()
hpfs: support FIEMAP
cifs: get rid of unused arguments of CIFSSMBWrite()
posix_acl: uapi header split
posix_acl: xattr representation cleanups
fs/aio.c: eliminate redundant loads in put_aio_ring_file
fs/internal.h: add const to ns_dentry_operations declaration
compat: remove compat_printk()
fs/buffer.c: make __getblk_slow() static
proc: unsigned file descriptors
fs/file: more unsigned file descriptors
fs: compat: remove redundant check of nr_segs
cachefiles: Fix attempt to read i_blocks after deleting file [ver #2]
cifs: don't use memcpy() to copy struct iov_iter
get rid of separate multipage fault-in primitives
fs: Avoid premature clearing of capabilities
fs: Give dentry to inode_change_ok() instead of inode
fuse: Propagate dentry down to inode_change_ok()
ceph: Propagate dentry down to inode_change_ok()
xfs: Propagate dentry down to inode_change_ok()
...
Pull in an OrangeFS branch containing miscellaneous improvements.
- clean up debugfs globals
- remove dead code in sysfs
- reorganize duplicated sysfs attribute structs
- consolidate sysfs show and store functions
- remove duplicated sysfs_ops structures
- describe organization of sysfs
- make devreq_mutex static
- g_orangefs_stats -> orangefs_stats for consistency
- rename most remaining global variables
CURRENT_TIME macro is not appropriate for filesystems as it
doesn't use the right granularity for filesystem timestamps.
Use current_time() instead.
CURRENT_TIME is also not y2038 safe.
This is also in preparation for the patch that transitions
vfs timestamps to use 64 bit time and hence make them
y2038 safe. As part of the effort current_time() will be
extended to do range checks. Hence, it is necessary for all
file system timestamps to use current_time(). Also,
current_time() will be transitioned along with vfs to be
y2038 safe.
Note that whenever a single call to current_time() is used
to change timestamps in different inodes, it is because they
share the same time granularity.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Felipe Balbi <balbi@kernel.org>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Acked-by: David Sterba <dsterba@suse.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This has been dormant code for many years. Parts of it were removed from
the OrangeFS kernel code when it went into mainline. These bits were missed.
Now the readahead cache has been resurrected in the OrangeFS userspace
portions. It was renamed there, since it doesn't really have anything to do
with mmap specifically, so it will be renamed here.
Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Mike,
On Fri, Jun 3, 2016 at 9:44 PM, Mike Marshall <hubcap@omnibond.com> wrote:
> We use the return value in this one line you changed, our userspace code gets
> ill when we send it (-ENOMEM +1) as a key length...
ah, my mistake. Here's a fixed version.
Thanks,
Andreas
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
The ORANGEFS_XATTR_INDEX_ defines are unused; the ORANGEFS_XATTR_NAME_
defines only obfuscate the code.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Error should only be returned if nothing had been read/written.
Otherwise we need to report a short read/write instead.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
a) open files can't have NULL inodes
b) it's SEEK_END, not ORANGEFS_SEEK_END; no need to get cute.
c) make_bad_inode() on lseek()?
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
just have it return the slot number or -E... - the caller checks
the sign anyway
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
