As already anticipated in the original commit, playback was broken for
very short samples. I just didn't expect it to be an actual problem,
because we're talking about less than 1.5 milliseconds here. But clearly
such wavetable samples do actually exist.
The problem was that for such short samples we'd set the current
position beyond the end of the loop, so we'd run off the end of the
sample and play garbage.
This is a bigger (more audible) problem than the original one, which was
that we'd start playback with garbage (whatever was still in the cache),
which would be mostly masked by the note's attack phase.
So revert to the old behavior for now. We'll subsequently fix it
properly with a bigger patch series.
Note that this isn't a full revert - the dead code is not re-introduced,
because that would be silly.
Fixes: df335e9a8b ("ALSA: emu10k1: fix synthesizer sample playback position and caching")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218625
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Message-ID: <20240401145805.528794-1-oswald.buddenhagen@gmx.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As described in the added code comment, a reference to .exit.text is ok
for drivers registered via module_platform_driver_probe(). Make this
explicit to prevent the following section mismatch warning
WARNING: modpost: sound/oss/dmasound/dmasound_paula: section mismatch in reference: amiga_audio_driver+0x8 (section: .data) -> amiga_audio_remove (section: .exit.text)
that triggers on an allmodconfig W=1 build.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Message-ID: <c216a129aa88f3af5c56fe6612a472f7a882f048.1711748999.git.u.kleine-koenig@pengutronix.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
These ASUS laptops use the Realtek HDA codec combined with a number of
CS35L56 amplifiers.
The SSID of the GA403U matches a previous ASUS laptop - we can tell them
apart because they use different codecs.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Message-ID: <20240329112803.23897-1-simont@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Since we put dvc_tlv static variable to a header file it's copied to
each module that includes the header. But not all of them are actually
used it.
Fix this W=1 build warning:
include/sound/tas2781-tlv.h:18:35: warning: 'dvc_tlv' defined but not
used [-Wunused-const-variable=]
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202403290354.v0StnRpc-lkp@intel.com/
Fixes: ae065d0ce9 ("ALSA: hda/tas2781: remove digital gain kcontrol")
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Message-ID: <0e461545a2a6e9b6152985143e50526322e5f76b.1711665731.git.soyer@irl.hu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Adding the ACPI HIDs to the match table triggers the cs35l56-hda modules
to be loaded on boot so that Serial Multi Instantiate can add the
devices to the bus and begin the driver init sequence.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Fixes: 73cfbfa9ca ("ALSA: hda/cs35l56: Add driver for Cirrus Logic CS35L56 amplifier")
Message-ID: <20240328121355.18972-1-simont@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds the existing fixup to certain TF platforms implementing
the ALC274 codec with a headset jack. It fixes/activates the inactive
microphone of the headset.
Signed-off-by: Christoffer Sandberg <cs@tuxedo.de>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: <stable@vger.kernel.org>
Message-ID: <20240328102757.50310-1-wse@tuxedocomputers.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The debug message "Playback action not supported: action" is not useful,
because the action was previously printed, and the list of supported
actions are intentional.
Remove the debug statement from the default switch case.
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Message-ID: <8b9546db6c92dea4476a7247a88d56248c2ba8c2.1711469583.git.soyer@irl.hu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Sometimes it is useful to examine the timing of kcontrol events.
Add debug statements to each kcontrol.
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Message-ID: <18ff4b0caab90a2dacf907e62346fd5079a9eb1a.1711469583.git.soyer@irl.hu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The "Speaker Digital Gain" kcontrol controls the TAS2781_DVC_LVL (0x1A)
register. Unfortunately the tas2563 does not have DVC_LVL, but has
INT_MASK0 in 0x1A, which has been misused so far.
Since commit c1947ce61f ("ALSA: hda/realtek: tas2781: enable subwoofer
volume control") the volume of the tas2781 amplifiers can be controlled
by the master volume, so this digital gain kcontrol is not needed.
Remove it.
Fixes: 5be27f1e3e ("ALSA: hda/tas2781: Add tas2781 HDA driver")
CC: stable@vger.kernel.org
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Message-ID: <741fc21db994efd58f83e7aef38931204961e5b2.1711469583.git.soyer@irl.hu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
clang warns about what it interprets as a truncated snprintf:
sound/aoa/soundbus/i2sbus/core.c:171:6: error: 'snprintf' will always be truncated; specified size is 6, but format string expands to at least 7 [-Werror,-Wformat-truncation-non-kprintf]
The actual problem here is that it does not understand the special
%pOFn format string and assumes that it is a pointer followed by
the string "OFn", which would indeed not fit.
Slightly increasing the size of the buffer to its natural alignment
avoids the warning, as it is now long enough for the correct and
the incorrect interprations.
Fixes: b917d58dcf ("ALSA: aoa: Convert to using %pOFn instead of device_node.name")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Message-ID: <20240326223825.4084412-9-arnd@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The dreamcastcard->timer could schedule the spu_dma_work and the
spu_dma_work could also arm the dreamcastcard->timer.
When the snd_pcm_substream is closing, the aica_channel will be
deallocated. But it could still be dereferenced in the worker
thread. The reason is that del_timer() will return directly
regardless of whether the timer handler is running or not and
the worker could be rescheduled in the timer handler. As a result,
the UAF bug will happen. The racy situation is shown below:
(Thread 1) | (Thread 2)
snd_aicapcm_pcm_close() |
... | run_spu_dma() //worker
| mod_timer()
flush_work() |
del_timer() | aica_period_elapsed() //timer
kfree(dreamcastcard->channel) | schedule_work()
| run_spu_dma() //worker
... | dreamcastcard->channel-> //USE
In order to mitigate this bug and other possible corner cases,
call mod_timer() conditionally in run_spu_dma(), then implement
PCM sync_stop op to cancel both the timer and worker. The sync_stop
op will be called from PCM core appropriately when needed.
Fixes: 198de43d75 ("[ALSA] Add ALSA support for the SEGA Dreamcast PCM device")
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Message-ID: <20240326094238.95442-1-duoming@zju.edu.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Initialization is completed before adding the component as that can
start the process of the device binding and trigger actions that check
init_done.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 73cfbfa9ca ("ALSA: hda/cs35l56: Add driver for Cirrus Logic CS35L56 amplifier")
Message-ID: <20240325145510.328378-1-rf@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The system and amplifier names influence which firmware and tuning files
are downloaded to the device; log these values to aid end-user system
support.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Message-ID: <20240325142937.257869-1-rf@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The endpoint in NHLT table for a SSP port could have the device type
NHLT_DEVICE_BT or NHLT_DEVICE_I2S. Use intel_nhlt_ssp_device_type()
function to retrieve the device type before querying the endpoint
blob to make sure we are always using correct device type parameter.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20231127120657.19764-3-peter.ujfalusi@linux.intel.com>
Add a helper function intel_nhlt_ssp_device_type() to detect the type
of specific SSP port. The result is nhlt_device_type enum type which
could be NHLT_DEVICE_BT or NHLT_DEVICE_I2S.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20231127120657.19764-2-peter.ujfalusi@linux.intel.com>
A bunch of fixes that came in during the merge window, probably the most
substantial thing is the DPCM locking fix for compressed audio which has
been lurking for a while.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmX8GaoACgkQJNaLcl1U
h9Bbhgf8Dd66lvQDLnc6xJ5wznNrrlqgSGdMddIBmEUDz+dgw/ODMZXDG3mKmQSo
eE4eJ/fYeg/Kz4wrdaC+K5zZAZ+o61erXSKYmwyyE5YYnQLXd086Q6h8B0zKBA8e
vLChyVfoQE6lbIiGGedCQ+W2nP8k7HURkafTasBpq/PD/ZZgsQ8IbcQTf2EPQpw8
x9eRZFwswUvhaVckabJR23zIjkC/dlraAt0LAqWnjzetq0ZUL/7Um/SiKy+yF7f5
0w+QqzizbNee4kscadywAOB5u5S2P8F37cqH9cT6q0bvFYgwri0/CXtHd3m5164o
j/NQbxbFz/mlI4CFoXg5BCss5fd0zA==
=GHC9
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.9-merge-window' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.9
A bunch of fixes that came in during the merge window, probably the most
substantial thing is the DPCM locking fix for compressed audio which has
been lurking for a while.
The recent conversion to the automatic kfree() forgot to mark a
variable with __free(kfree), leading to memory leaks. Fix it.
Fixes: 1052d98822 ("ALSA: control: Use automatic cleanup of kfree()")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/r/c1e2ef3c-164f-4840-9b1c-f7ca07ca422a@alu.unizg.hr
Message-ID: <20240320062722.31325-1-tiwai@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cirrus amps support for this laptop was added in patch:
33e5e648e6 ("ALSA: hda: cs35l41: Support additional HP Envy Models")
This patch adds fixes for wrong pincfgs, wrong DAC selection and
mute/micmute LEDs.
Signed-off-by: Anthony I Gilea <i@cpp.in>
Message-ID: <e2a7aaed-e9d7-4d36-8abf-b71dfd32a0ff@cpp.in>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Recently we tested the headphone playback on 2 LG machines, if we set
the volume to the max value or near to the max value, the sound is too
loud, it could even bring harm to listeners.
A workaround is to decrease the max volume to a reasonable value for
the headphone's amplifier, then the users couldn't set the volume
bigger than that value from the userspace.
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Message-ID: <20240318011128.156023-1-hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We find mising DPCM locking inside soc_compr_set_params_fe
before calling dpcm_be_dai_hw_params() and dpcm_be_dai_prepare()
which cause lockdep assert for DPCM lock not held in
__soc_pcm_hw_params() and __soc_pcm_prepare()
Signed-off-by: Shalini Manjunatha <quic_c_shalma@quicinc.com>
Link: https://msgid.link/r/d985beeafdd32316eb45f20811eb7926da7a796e.1709720380.git.quic_c_shalma@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Keyboard has an LED that is ON/OFF when mic is muted/active
- LED is controlled by GPIO pin
- Patch enables led to appear in /sys/class/leds/ as hda::micmute
- Enables LED when mic is MUTED
- Disables LED when mic is active
[ fixed white spaces by tiwai ]
Signed-off-by: Ian Murphy <iano200@gmail.com>
Message-ID: <20240316094157.13890-1-iano200@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This reverts commit 1601cd53c7.
This fix is applied globally to all devices, and it may change the
existing control names. When the devices are managed with the fixed
configuration like UCM, such control name mismatch may lead to
significant regressions.
For avoiding that kind of regression, we would need to apply such
changes conditionally, but it'd take time to settle down.
While the original fix is a good thing in general, in order to address
the regression, let's revert the change for now.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218605
Reported-and-tested-by: Niklāvs Koļesņikovs <pinkflames.linux@gmail.com>
Message-ID: <20240316083744.28126-1-tiwai@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Merge series from Cristian Ciocaltea <cristian.ciocaltea@collabora.com>:
This patch series restores audio support on Valve's Steam Deck OLED model, which
broke after the recent introduction of ACP/PSP communication for IRAM/DRAM fence
register programming.
The signed_fw_image member of struct sof_amd_acp_desc is used to enable
signed firmware support in the driver via the acp_sof_quirk_table.
In preparation to support additional use cases of the quirk table (i.e.
adding new flags), move signed_fw_image to a new struct acp_quirk_entry
and update all references to it accordingly.
No functional changes intended.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://msgid.link/r/20240220201623.438944-2-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The speakers on the Lenovo Yoga 9 14IMH9 are similar to previous generations
such as the 14IAP7, and the bass speakers can be fixed using similar methods
with one caveat: 14IMH9 uses CS35L41 amplifiers which need to be activated
separately.
Signed-off-by: Jichi Zhang <i@jichi.ca>
Message-ID: <20240315081954.45470-3-i@jichi.ca>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Merge series from Luca Ceresoli <luca.ceresoli@bootlin.com>:
This series adds a driver for the internal audio codec of the Rockchip
RK3308 SoC, along with some related patches. This codec is internally
connected to the I2S peripherals on the same chip, and it has some
peculiarities arising from that interconnection.
For proper bidirectional operation with the internal codec at any possible
combination of sampling rates, the I2S peripheral needs two clock sources
(tx and rx), while connection with an external codec commonly needs only
one.
Since v5.16 there is a driver for the I2S in
sound/soc/rockchip/rockchip_i2s_tdm.c, but in some cases it does not
configure correctly the clocks, resulting in an unnecessarily inaccurate
rate. Patch 1 fixes this.
Patches 2-4 add the codec driver along with the bindings and a new helper
macro.
Patches 5-7 add to the SoC DT file two I2S controllers (those which are
internally connected to the internal codec) and the codec itself and enable
the driver in the ARM64 defconfig.
Luca
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
---
Changes in v4:
- several cleanups in the codec probe function
- Link to v3: https://lore.kernel.org/r/20240221-rk3308-audio-codec-v3-0-dfa34abfcef6@bootlin.com
Changes in v3:
- Add the I2S clock fix patch and remove a previous fix which is now superseded
- Codec driver: fix silent playback until a given amplitude of sigital
value, seen at >= 96 kHz rate
- various other changes, listed per-patch
- Link to v2: https://lore.kernel.org/r/20231219-rk3308-audio-codec-v2-0-c70d06021946@bootlin.com
Changes in v2:
- largely rewrote the codec driver to use DAPM and lots of improvements
and cleanups
- removed the RK3308 audio card and related patches
- various other changes, listed per-patch
- Link to v1: https://lore.kernel.org/all/20220907142124.2532620-1-luca.ceresoli@bootlin.com/
---
Luca Ceresoli (7):
ASoC: rockchip: i2s-tdm: Fix inaccurate sampling rates
ASoC: dt-bindings: Add Rockchip RK3308 internal audio codec
ASoC: core: add SOC_DOUBLE_RANGE_TLV() helper macro
ASoC: codecs: Add RK3308 internal audio codec driver
arm64: defconfig: enable Rockchip RK3308 internal audio codec driver
arm64: dts: rockchip: add i2s_8ch_2 and i2s_8ch_3
arm64: dts: rockchip: add the internal audio codec
.../bindings/sound/rockchip,rk3308-codec.yaml | 98 +++
MAINTAINERS | 7 +
arch/arm64/boot/dts/rockchip/rk3308.dtsi | 56 ++
arch/arm64/configs/defconfig | 1 +
include/sound/soc.h | 12 +
sound/soc/codecs/Kconfig | 11 +
sound/soc/codecs/Makefile | 2 +
sound/soc/codecs/rk3308_codec.c | 974 +++++++++++++++++++++
sound/soc/codecs/rk3308_codec.h | 579 ++++++++++++
sound/soc/rockchip/rockchip_i2s_tdm.c | 352 +-------
10 files changed, 1746 insertions(+), 346 deletions(-)
---
base-commit: dfda120c512b3edca1436f770924e91b14f93a98
change-id: 20231219-rk3308-audio-codec-a5558ba8949d
Best regards,
--
Luca Ceresoli <luca.ceresoli@bootlin.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmXuGjEeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGlhYH/3entux62pEL1BSR
3UNZvs41dZ6BW60d5+DQ+v/GnyEwn4Krtf054sfVL3cwGBLbErndo4F2eSHgMnRy
zUTLXl+aAQRpC47phNvXu1bC6jXm+xuXu/8VBYZWP+IP10zFtdSeTC2lQtYwpFd9
u1ZqUtTfKSWjADToLW6asjlviO6MV9rdAYkttJYcQ7Ztn/v+NAECMb0AvFDKHvh4
g74BA3bqslX1fPOMyAH/4u/IL0PRj1usLvbCsTAujb5R9121geYRBylgw0Ei3YXx
P+vaOmJeO33bWiRNdfxEMoQSfJ+q7Jq/x5utZ/SckAy8bFJG7VimQwRrFYtcN6ls
LR0oKRY=
=e2GM
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmXx7wEACgkQJNaLcl1U
h9BYKwf/YYh4JqMRk9bqq+36XjtTluiHvZ45GjDhuEl+dprzAEZTlRxR7JXj8QqU
4G6uywax6qI6Uynlrz78Mk707nkQLjyfJxRblE8NiSwTOHKg5KMh0zmatOPJEHiX
AGKoI7AJjWdtL0+qQmiNTTzEDsJgpL3kivCPXlOl0bdL67H92Do9Hof3e0JeseTy
AT6KMQHt4JxuBh1I/FpeY+WUc77TaM9mlp3itkOUdAxnb90OqItVGRxcs3i2WSH0
sdu5GxpozA5sXBwQh5yz3O9hXzXH0cGCgY5jNylRxzwOdroUTLyZHUItEHAZY4Uj
TpUl6Pjf1m1ieBJxjii3qoC4/iHdrg==
=U9Ja
-----END PGP SIGNATURE-----
ASoC: Merge up release
In order to apply additional fixes that depend on the fixes merged for
v6.8 merge up the final release.
If a usb audio device sets more bits than the amount of channels
it could write outside of the map array.
Signed-off-by: Johan Carlsson <johan.carlsson@teenage.engineering>
Fixes: 04324ccc75 ("ALSA: usb-audio: add channel map support")
Message-ID: <20240313081509.9801-1-johan.carlsson@teenage.engineering>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The runtime_pm handling seems to have been loosely inspired by the
cs32l41 driver, but in this case the get_noresume/put sequence is not
required.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Message-ID: <20240312161217.79510-1-pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some HP laptops have received revisions that altered their board IDs
and therefore the current patches/quirks do not apply to them.
Specifically, for my Probook 440 G8, I have a board ID of 8a74.
It is necessary to add a line for that specific model.
Signed-off-by: Valentine Altair <faetalize@proton.me>
Cc: <stable@vger.kernel.org>
Message-ID: <kOqXRBcxkKt6m5kciSDCkGqMORZi_HB3ZVPTX5sD3W1pKxt83Pf-WiQ1V1pgKKI8pYr4oGvsujt3vk2zsCE-DDtnUADFG6NGBlS5N3U4xgA=@proton.me>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When pcm_runtime is adding platform components it will scan all
registered components. In case of DPCM FE/BE some DAI links will
configure dummy platform. However both dummy codec and dummy platform
are using "snd-soc-dummy" as component->name. Dummy codec should be
skipped when adding platforms otherwise there'll be overflow and UBSAN
complains.
Reported-by: Zhipeng Wang <zhipeng.wang_1@nxp.com>
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Link: https://msgid.link/r/20240305065606.3778642-1-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The sample rates set by the rockchip_i2s_tdm driver in master mode are
inaccurate up to 5% in several cases, due to the driver logic to configure
clocks and a nasty interaction with the Common Clock Framework.
To understand what happens, here is the relevant section of the clock tree
(slightly simplified), along with the names used in the driver:
vpll0 _OR_ vpll1 "mclk_root"
clk_i2s2_8ch_tx_src "mclk_parent"
clk_i2s2_8ch_tx_mux
clk_i2s2_8ch_tx "mclk" or "mclk_tx"
This is what happens when playing back e.g. at 192 kHz using
audio-graph-card (when recording the same applies, only s/tx/rx/):
0. at probe, rockchip_i2s_tdm_set_sysclk() stores the passed frequency in
i2s_tdm->mclk_tx_freq (*) which is 50176000, and that is never modified
afterwards
1. when playback is started, rockchip_i2s_tdm_hw_params() is called and
does the following two calls
2. rockchip_i2s_tdm_calibrate_mclk():
2a. selects mclk_root0 (vpll0) as a parent for mclk_parent
(mclk_tx_src), which is OK because the vpll0 rate is a good for
192000 (and sumbultiple) rates
2b. sets the mclk_root frequency based on ppm calibration computations
2c. sets mclk_tx_src to 49152000 (= 256 * 192000), which is also OK as
it is a multiple of the required bit clock
3. rockchip_i2s_tdm_set_mclk()
3a. calls clk_set_rate() to set the rate of mclk_tx (clk_i2s2_8ch_tx)
to the value of i2s_tdm->mclk_tx_freq (*), i.e. 50176000 which is
not a multiple of the sampling frequency -- this is not OK
3a1. clk_set_rate() reacts by reparenting clk_i2s2_8ch_tx_src to
vpll1 -- this is not OK because the default vpll1 rate can be
divided to get 44.1 kHz and related rates, not 192 kHz
The result is that the driver does a lot of ad-hoc decisions about clocks
and ends up in using the wrong parent at an unoptimal rate.
Step 0 is one part of the problem: unless the card driver calls set_sysclk
at each stream start, whatever rate is set in mclk_tx_freq during boot will
be taken and used until reboot. Moreover the driver does not care if its
value is not a multiple of any audio frequency.
Another part of the problem is that the whole reparenting and clock rate
setting logic is conflicting with the CCF algorithms to achieve largely the
same goal: selecting the best parent and setting the closest clock
rate. And it turns out that only calling once clk_set_rate() on
clk_i2s2_8ch_tx picks the correct vpll and sets the correct rate.
The fix is based on removing the custom logic in the driver to select the
parent and set the various clocks, and just let the Clock Framework do it
all. As a side effect, the set_sysclk() op becomes useless because we now
let the CCF compute the appropriate value for the sampling rate. It also
implies that the whole calibration logic is now dead code and so it is
removed along with the "PCM Clock Compensation in PPM" kcontrol, which has
always been broken anyway. The handling of the 4 optional clocks also
becomes dead code and is removed.
The actual rates have been tested playing 30 seconds of audio at various
sampling rates before and after this change using sox:
time play -r <sample_rate> -n synth 30 sine 950 gain -3
The time reported in the table below is the 'real' value reported by the
'time' command in the above command line.
rate before after
--------- ------ ------
8000 Hz 30.60s 30.63s
11025 Hz 30.45s 30.51s
16000 Hz 30.47s 30.50s
22050 Hz 30.78s 30.41s
32000 Hz 31.02s 30.43s
44100 Hz 30.78s 30.41s
48000 Hz 29.81s 30.45s
88200 Hz 30.78s 30.41s
96000 Hz 29.79s 30.42s
176400 Hz 27.40s 30.41s
192000 Hz 29.79s 30.42s
While the tests are running the clock tree confirms that:
* without the patch, vpll1 is always used and clk_i2s2_8ch_tx always
produces 50176000 Hz, which cannot be divided for most audio rates
except the slowest ones, generating inaccurate rates
* with the patch:
- for 192000 Hz vpll0 is used
- for 176400 Hz vpll1 is used
- clk_i2s2_8ch_tx always produces (256 * <rate>) Hz
Tested on the RK3308 using the internal audio codec.
Fixes: 081068fd64 ("ASoC: rockchip: add support for i2s-tdm controller")
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://msgid.link/r/20240305-rk3308-audio-codec-v4-1-312acdbe628f@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
'gpio-ranges' is a phandle-array which is really a matrix. The schema in
cirrus,cs42l43 is incomplete as it doesn't define there's only a single
entry. Add the outer array constraints that there is a single entry.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://msgid.link/r/20240311222554.1940567-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This has been quite a small release, there's a lot of driver specific
cleanups and minor enhancements but hardly anything on the core and only
one new driver. Highlights include:
- SoundWire support for AMD ACP 6.3 systems.
- Support for reporting version information for AVS firmware.
- Support DSPless mode for Intel Soundwire systems.
- Support for configuring CS35L56 amplifiers using EFI calibration
data.
- Log which component is being operated on as part of power management
trace events.
- Support for Microchip SAM9x7, NXP i.MX95 and Qualcomm WCD939x
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmXvE1AACgkQJNaLcl1U
h9B15Qf8CrS5zHsD54bvTcumkDgbJ8Dl9f5qz4UN/AX0mcZ1UJU6sQ0HxIGEtlPc
26pneHV9ZA0wSPw432NBpwcfe7AsWASmKUf6S2hsj4LMvnoj75iiZum8TE71ior7
QI9ARnNipB1tHk7Kmgs/pe+CqX3hhCVqYUI9w5fMIj05T5qwYbqCERws6JA2Uw97
6fb5CgI2uRYTShVVmYsE/FlxXmZqNN4NnNxlVvUSM5TE3Tayf+BCEqhpwuh59Pt/
G+mZfj3eof0HdjGPQbLRPOWQOa3bT8gmT89OlbmmMf17+975pgShBbARzkv41vk1
ifr6muHweaDLD7gloS/HUr4JRo9Daw==
=ZYC5
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v6.9
This has been quite a small release, there's a lot of driver specific
cleanups and minor enhancements but hardly anything on the core and only
one new driver. Highlights include:
- SoundWire support for AMD ACP 6.3 systems.
- Support for reporting version information for AVS firmware.
- Support DSPless mode for Intel Soundwire systems.
- Support for configuring CS35L56 amplifiers using EFI calibration
data.
- Log which component is being operated on as part of power management
trace events.
- Support for Microchip SAM9x7, NXP i.MX95 and Qualcomm WCD939x
Using __exit for the remove function results in the remove callback
being discarded with SND_SOC_TLV320ADC3XXX=y. When such a device gets
unbound (e.g. using sysfs or hotplug), the driver is just removed
without the cleanup being performed. This results in resource leaks. Fix
it by compiling in the remove callback unconditionally.
This also fixes a W=1 modpost warning:
WARNING: modpost: sound/soc/codecs/snd-soc-tlv320adc3xxx: section mismatch in reference: adc3xxx_i2c_driver+0x10 (section: .data) -> adc3xxx_i2c_remove (section: .exit.text)
(which only happens with SND_SOC_TLV320ADC3XXX=m).
Fixes: e9a3b57efd ("ASoC: codec: tlv320adc3xxx: New codec driver")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://msgid.link/r/20240310143852.397212-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The 4th Gen input preamp gain range is 0dB to +69dB, although the
control values range from 0 to 70. Replace SCARLETT2_MAX_GAIN with
SCARLETT2_MAX_GAIN_VALUE and SCARLETT2_MAX_GAIN_DB, and update the TLV
again.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Fixes: a45cf0a083 ("ALSA: scarlett2: Fix Scarlett 4th Gen input gain range")
Message-ID: <Ze7OMA8ntG7KteGa@m.b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The input gain range TLV was declared as -70dB to 0dB, but the preamp
gain range is actually 0dB to +70dB. Rename SCARLETT2_GAIN_BIAS to
SCARLETT2_MAX_GAIN and update the TLV to fix.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Fixes: 0a995e38dc ("ALSA: scarlett2: Add support for software-controllable input gain")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <9168317b5ac5335943d3f14dbcd1cc2d9b2299d0.1710047969.git.g@b4.vu>
The meanings of the raw_auto_gain_status values were originally
guessed through experimentation, but the official names have now been
discovered. Update the autogain status control strings accordingly.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Fixes: 0a995e38dc ("ALSA: scarlett2: Add support for software-controllable input gain")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <8bd12a5e7dc714801dd9887c4bc5cb35c384e27c.1710047969.git.g@b4.vu>
The value currently being read to determine the low-voltage state is
actually the front panel state. Fix the code to use the correct offset
for the low-voltage state.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Fixes: d7cfa2fdfc ("ALSA: scarlett2: Add power status control")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <d97b7d87f43b0e54f37e1552394be2f3ae182704.1710047969.git.g@b4.vu>
After system_resume the amplifers will remain off, even if they were on
before system_suspend.
Use playback_started bool to save the playback state, and restore power
state based on it.
Fixes: 5be27f1e3e ("ALSA: hda/tas2781: Add tas2781 HDA driver")
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <1742b61901781826f6e6212ffe1d21af542d134a.1709918447.git.soyer@irl.hu>
The runtime_resume function calls prmg_load and apply_calibration
functions, but system_resume also calls them, so calling
pm_runtime_force_resume before reset is unnecessary.
For consistency, do not call the pm_runtime_force_suspend in
system_suspend, as runtime_suspend does the same.
Fixes: 5be27f1e3e ("ALSA: hda/tas2781: Add tas2781 HDA driver")
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <d0b4cc1248b9d375d59c009563da42d60d69eac3.1709918447.git.soyer@irl.hu>
