Implement sync, output format, and input status mixer controls, to allow
the interface to be used as a straight ADAT/SPDIF (+ Headphones) I/O
interface.
This does not implement the matrix mixer, output gain controls, or input
level meter feedback. The full mixer interface is only really usable
using a dedicated userspace control app (there are too many mixer nodes
for alsamixer to be usable), so for now we leave it up to userspace to
directly control these features using raw USB control messages. This is
similar to how it's done with some FireWire interfaces (ffado-mixer).
Signed-off-by: Asahi Lina <lina@asahilina.net>
Link: https://patch.msgid.link/20240903-rme-digiface-v2-2-71b06c912e97@asahilina.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add trivial support for audio streaming on the RME Digiface USB. Binds
only to the first interface to allow userspace to directly drive the
complex I/O and matrix mixer controls.
Signed-off-by: Cyan Nyan <cyan.vtb@gmail.com>
[Lina: Added 2x/4x sample rate support & boot/format quirks]
Co-developed-by: Asahi Lina <lina@asahilina.net>
Signed-off-by: Asahi Lina <lina@asahilina.net>
Link: https://patch.msgid.link/20240903-rme-digiface-v2-1-71b06c912e97@asahilina.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The mic in those laptops suffers too high gain resulting in mostly (fan
or else) noise being recorded. In addition to the existing fixup about
mic detection, apply also limiting its boost. While at it, extend the
quirk to also V5[46]0TNE models, which have the same issue.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240903124939.6213-1-marmarek@invisiblethingslab.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add page table entry configurations to support higher sample rate
streams with multiple channels for ACP7.0 platforms.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://patch.msgid.link/20240903113427.182997-11-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
All I2S instances are connected to different powertile form acp6.0
onwards, refactor dai driver to support all I2S instances for all acp
platforms.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://patch.msgid.link/20240903113427.182997-3-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We used to wrap with no_free_ptr() for the return value from
memdup_user() with errors where the auto cleanup is applied. This was
a workaround because the initial implementation of kfree auto-cleanup
checked only NULL pointers.
Since recently, though, the kfree auto-cleanup checks with
IS_ERR_OR_NULL() (by the commit cd7eb8f83f ("mm/slab: make
__free(kfree) accept error pointers")), hence those workarounds became
superfluous. Let's drop them now.
Link: https://patch.msgid.link/20240902075246.3743-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a test case for commit bb4485562f ("ASoC: cs-amp-lib: Ignore
empty UEFI calibration entries").
Any entries in the calibration blob that have calTime==0 are empty
entries. So they must not be returned by a lookup.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20240830144819.118362-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sm8250 and sc7280 have lpass codec version 1.0, as these are very old
platforms, they do not have a reliable way to get the codec version
from core_id registers.
On codec versions below 2.0, even though the core_id registers are
available to read, the values of these registers are not unique to be
able to determine the version of the codec dynamically.
Add the version info into of_data, so that driver does not need to use
core_id registers to get version number for such situations.
Fixes: 378918d591 ("ASoC: codecs: lpass-macro: add helpers to get codec version")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://patch.msgid.link/20240816091210.50172-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Lenovo V145 is having phase inverted dmic but simply applying inverted
dmic fixups does not work. Chaining up verb fixes for ALC283 enables
inverting dmic fixup to work properly.
Signed-off-by: Terry Cheong <htcheong@chromium.org>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240830-lenovo-v145-fixes-v3-1-f7b7265068fa@chromium.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We do not need model specific HDA quirks to construct the component
binding details of Cirrus Logic companion amplifiers as this information
is already present in the ACPI.
Quirks are then only required for special workarounds not described in
the ACPI such as internal configuration of the Realtek codecs.
The codec pointer is now initialized in hda_component_manager_init() so
that we can detect when companion amplifiers are found in the ACPI but
the SSID invokes a quirk that also attempts to create the component
binding.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Link: https://patch.msgid.link/20240829161114.140938-1-simont@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Read temperature of the speaker and expose it via hwmon interface, which
will be later used during calibration of speaker protection algorithms.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240809110122.137761-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This fixes the LRCLK polarity for sun8i-h3 and sun50i-h6 in i2s mode
which was wrongly inverted.
The LRCLK was being set in reversed logic compared to the DAI format:
inverted LRCLK for SND_SOC_DAIFMT_IB_NF and SND_SOC_DAIFMT_NB_NF; normal
LRCLK for SND_SOC_DAIFMT_IB_IF and SND_SOC_DAIFMT_NB_IF. Such reversed
logic applies properly for DSP_A, DSP_B, LEFT_J and RIGHT_J modes but
not for I2S mode, for which the LRCLK signal results reversed to what
expected on the bus. The issue is due to a misinterpretation of the
LRCLK polarity bit of the H3 and H6 i2s controllers. Such bit in this
case does not mean "0 => normal" or "1 => inverted" according to the
expected bus operation, but it means "0 => frame starts on low edge" and
"1 => frame starts on high edge" (from the User Manuals).
This commit fixes the LRCLK polarity by setting the LRCLK polarity bit
according to the selected bus mode and renames the LRCLK polarity bit
definition to avoid further confusion.
Fixes: dd657eae81 ("ASoC: sun4i-i2s: Fix the LRCK polarity")
Fixes: 73adf87b7a ("ASoC: sun4i-i2s: Add support for H6 I2S")
Signed-off-by: Matteo Martelli <matteomartelli3@gmail.com>
Link: https://patch.msgid.link/20240801-asoc-fix-sun4i-i2s-v2-1-a8e4e9daa363@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
MSI Bravo 17 (D7VEK), like other laptops from the family,
has broken ACPI tables and needs a quirk for internal mic
to work.
Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
Link: https://patch.msgid.link/20240829130313.338508-1-markuss.broks@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In order to get the correct keys when using the ES8326.We will associate
SND_JACK_BTN_1 to KEY_VOLUMEUP and SND_JACK_BTN_2 to KEY_VOLUMEDOWN
when the ES8326 flag is recognized.
Signed-off-by: Zhang Yi <zhangyi@everest-semi.com>
Link: https://patch.msgid.link/20240816114921.48913-1-zhangyi@everest-semi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:
Some simplifications from Brent Lu for Chromebooks, a new SoundWire codec
support from Bard Liao, new cs42l43 match entries support from
Charles Keepax, Add quirks from some new Dell laptops from Maciej
Strozek, some ACPI match entries from Balamurugan C, and few bug
fixes from Pierre-Louis Bossart.
v2:
- Add "ASoC: SOF: Intel: hda: support BT link mask in mach_params"
commit to fix the build issue in v1.
Balamurugan C (2):
ASoC: Intel: soc-acpi: Add entry for sof_es8336 in ARL match table.
ASoC: Intel: soc-acpi: Add entry for HDMI_In capture support in ARL
match table
Bard Liao (4):
ASoC: Intel: sof_sdw: add rt1320 amp support
ASoC: SOF: Intel: hda: refactoring topology name fixup for HDA mach
ASoC: Intel: sof_sdw: move ignore_internal_dmic check earlier
ASoC: Intel: sof_sdw: overwrite mach_params->dmic_num
Brent Lu (5):
ASoC: SOF: Intel: hda: refactoring topology name fixup for SDW mach
ASoC: SOF: Intel: hda: support BT link mask in mach_params
ASoC: Intel: skl_hda_dsp_generic: support BT audio offload
ASoC: Intel: skl_hda_dsp_generic: remove hdac-hdmi support
ASoC: Intel: skl_hda_dsp_generic: use sof_hdmi_private to init HDMI
Charles Keepax (3):
ASoC: Intel: soc-acpi: arl: Add match entries for new cs42l43 laptops
ASoC: Intel: soc-acpi: adl: Add match entries for new cs42l43 laptops
ASoC: Intel: soc-acpi: lnl: Add match entries for new cs42l43 laptops
Maciej Strozek (1):
ASoC: Intel: sof_sdw: Add quirks from some new Dell laptops
Pierre-Louis Bossart (2):
ASoC: Intel: sof_sdw: make sof_sdw_quirk static
ASoC: Intel: boards: always check the result of
acpi_dev_get_first_match_dev()
include/sound/soc-acpi.h | 2 +
sound/soc/intel/boards/Kconfig | 2 +-
sound/soc/intel/boards/bytcht_cx2072x.c | 4 +
sound/soc/intel/boards/bytcht_da7213.c | 4 +
sound/soc/intel/boards/bytcht_es8316.c | 2 +-
sound/soc/intel/boards/bytcr_rt5640.c | 2 +-
sound/soc/intel/boards/bytcr_rt5651.c | 2 +-
sound/soc/intel/boards/cht_bsw_rt5645.c | 4 +
sound/soc/intel/boards/cht_bsw_rt5672.c | 4 +
sound/soc/intel/boards/skl_hda_dsp_common.c | 56 ++--
sound/soc/intel/boards/skl_hda_dsp_common.h | 39 +--
sound/soc/intel/boards/skl_hda_dsp_generic.c | 58 ++--
sound/soc/intel/boards/sof_es8336.c | 12 +-
sound/soc/intel/boards/sof_sdw.c | 85 +++++-
sound/soc/intel/boards/sof_sdw_common.h | 2 -
sound/soc/intel/boards/sof_wm8804.c | 4 +
.../intel/common/soc-acpi-intel-adl-match.c | 105 +++++++
.../intel/common/soc-acpi-intel-arl-match.c | 244 +++++++++++++++
.../intel/common/soc-acpi-intel-hda-match.c | 12 +-
.../intel/common/soc-acpi-intel-lnl-match.c | 104 +++++++
sound/soc/sdw_utils/soc_sdw_rt_amp.c | 11 +-
sound/soc/sdw_utils/soc_sdw_utils.c | 19 ++
sound/soc/sof/intel/hda.c | 281 ++++++++----------
23 files changed, 780 insertions(+), 278 deletions(-)
--
2.43.0
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
No driver is calling snd_soc_dpcm_can_be_xxx() functions. We don't need
to have EXPORT_SYMBOL_GPL() for them. This patch-set makes it static function.
Use the IS_ERR_OR_NULL() helper instead of open-coding a
NULL and an error pointer checks to simplify the code and
improve readability.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Link: https://patch.msgid.link/20240828122829.3697502-1-lihongbo22@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
No driver is calling snd_soc_dpcm_can_be_xxx() functions. We don't need
to have EXPORT_SYMBOL_GPL() for them. Let's makes it static function.
One note is that snd_soc_dpcm_fe_can_update() is not used in upstream.
Use #if-endif and keep it for future support.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87h6b6df7e.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch moves snd_soc_dpcm_can_be_xxx() functions to top of soc-pcm.c
This is prepare for cleanup.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87ikvmdf7j.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add quirks for some new Dell laptops using cs42l43's speaker outputs.
Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20240827123215.258859-18-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add some new match table entries on Lunarlake for some coming cs42l43
laptops.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20240827123215.258859-17-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add some new match table entries on Alderlake for some coming cs42l43
laptops.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20240827123215.258859-16-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add some new match table entries on Arrowlake for some coming cs42l43
laptops.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20240827123215.258859-15-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use sof_hdmi_private structure instead of a link list of
skl_hda_hdmi_pcm structure for HDMI dai link initialization since
hdac-hdmi support is removed.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20240827123215.258859-14-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since this machine driver has no longer been enumerated by SKL
platform driver, we could remove hdac-hdmi support code just like
what we did to other SOF machine drivers.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20240827123215.258859-13-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adding HDMI-In capture via I2S feature support in ARL platform.
Signed-off-by: Balamurugan C <balamurugan.c@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20240827123215.258859-12-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adding ES83x6 codec support for ARL platforms and entry in match table.
Signed-off-by: Balamurugan C <balamurugan.c@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20240827123215.258859-11-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add BT offload BE link to dai link array if the BT offload link mask
is valid (only one bit set).
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20240827123215.258859-10-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add an new variable bt_link_mask to snd_soc_acpi_mach_params structure.
SSP port mask of BT offload found in NHLT table will be sent to
machine driver to setup BE dai link with correct SSP port number.
This patch only detects and enables the BT dailink. The functionality
will only be unlocked with a topology file that makes a reference to
that BT dailink. For backwards-compatibility reasons, this topology
will not be used by default. Chromebooks and Linux users willing to
experiment shall use the tplg_name kernel parameter to force the use
of an enhanced topology.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20240827123215.258859-9-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
mach_params->dmic_num will be used to set the cfg-mics value of
card->components string. Overwrite it to the actual number of PCH
DMICs used in the device.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://patch.msgid.link/20240827123215.258859-8-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dmic links will not be created if ctx->ignore_internal_dmic is set, and
dmic_num should be 0 in this case. Move ignore_internal_dmic check
earlier where dmic_num is set to get an accurate dmic_num.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://patch.msgid.link/20240827123215.258859-7-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove SDW mach's topology name fixup code and use the code in
hda_machine_select() to fixup its topology file name. No functional
change in this commit.
Compared with I2S/HDA mach, SDW mach always fixup topology file name
with dmic num without using DMIC quirk flag and pass topology name
with file extension to SOF driver. Therefore, we add extra code to
remove file extension if it exists.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20240827123215.258859-6-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move I2S mach's topology name fixup code to the end of machine driver
enumeration flow so HDA mach could also use same code to fixup its
topology file name as well. No functional change in this commit.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20240827123215.258859-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There's no need to make this variable visible at a higher level.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20240827123215.258859-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SOF topology loading function sets the device name for the platform
component link. This should be unset when unloading the topology,
otherwise a machine driver unbind/bind or reprobe would complain about
an invalid component as having both its component name and of_node set:
mt8186_mt6366 sound: ASoC: Both Component name/of_node are set for AFE_SOF_DL1
mt8186_mt6366 sound: error -EINVAL: Cannot register card
mt8186_mt6366 sound: probe with driver mt8186_mt6366 failed with error -22
This happens with machine drivers that set the of_node separately.
Clear the SOF link platform name in the topology unload callback.
Fixes: 311ce4fe76 ("ASoC: SOF: Add support for loading topologies")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://patch.msgid.link/20240821041006.2618855-1-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The Sirius notebooks have two sets of speakers 0x17 (sides) and
0x1d (top center). The side speakers are active by default but
the top speakers aren't.
This patch provides a pincfg quirk to activate the top speakers.
Signed-off-by: Christoffer Sandberg <cs@tuxedo.de>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20240827102540.9480-1-wse@tuxedocomputers.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It became a bit larger collection of fixes than wished at this time,
but all changes are small and mostly device-specific fixes that
should be fairly safe to apply. Majority of fixes are about ASoC
for AMD SOF, Cirrus codecs, lpass, etc, in addition to the usual
HD-audio quirks / fixes.
-----BEGIN PGP SIGNATURE-----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=u+nW
-----END PGP SIGNATURE-----
Merge tag 'sound-6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"It became a bit larger collection of fixes than wished at this time,
but all changes are small and mostly device-specific fixes that should
be fairly safe to apply.
Majority of fixes are about ASoC for AMD SOF, Cirrus codecs, lpass,
etc, in addition to the usual HD-audio quirks / fixes"
* tag 'sound-6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (22 commits)
ALSA: hda: hda_component: Fix mutex crash if nothing ever binds
ALSA: hda/realtek: support HP Pavilion Aero 13-bg0xxx Mute LED
ALSA: hda/realtek: Fix the speaker output on Samsung Galaxy Book3 Ultra
ASoC: cs-amp-lib: Ignore empty UEFI calibration entries
ASoC: cs-amp-lib-test: Force test calibration blob entries to be valid
ALSA: hda/realtek - FIxed ALC285 headphone no sound
ALSA: hda/realtek - Fixed ALC256 headphone no sound
ASoC: allow module autoloading for table board_ids
ASoC: allow module autoloading for table db1200_pids
ALSA: hda: cs35l56: Don't use the device index as a calibration index
ALSA: seq: Skip event type filtering for UMP events
ALSA: hda/realtek: Enable mute/micmute LEDs on HP Laptop 14-ey0xxx
ASoC: SOF: amd: Fix for acp init sequence
ASoC: amd: acp: fix module autoloading
ASoC: mediatek: mt8188: Mark AFE_DAC_CON0 register as volatile
ASoC: codecs: wcd937x: Fix missing de-assert of reset GPIO
ASoC: SOF: mediatek: Add missing board compatible
ASoC: MAINTAINERS: Drop Banajit Goswami from Qualcomm sound drivers
ASoC: SOF: amd: Fix for incorrect acp error register offsets
ASoC: SOF: amd: move iram-dram fence register programming sequence
...
As the last-standing user of PCM vmalloc buffer helper API took its
own buffer management, we can finally drop those API functions, which
were leftover after reorganization of ALSA memalloc code.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807152725.18948-3-tiwai@suse.de
Let the kmemdup_array() take care about multiplication
and possible overflows.
Using kmemdup_array() is more appropriate and makes the code
easier to audit.
Signed-off-by: Shen Lichuan <shenlichuan@vivo.com>
Link: https://patch.msgid.link/20240826054402.58396-1-shenlichuan@vivo.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from of_device_id table.
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Link: https://patch.msgid.link/20240826084924.368387-5-liaochen4@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from of_device_id table.
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Link: https://patch.msgid.link/20240826084924.368387-4-liaochen4@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from of_device_id table.
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Link: https://patch.msgid.link/20240826084924.368387-3-liaochen4@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from of_device_id table.
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Link: https://patch.msgid.link/20240826084924.368387-2-liaochen4@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move the initialization of parent->mutex into
hda_component_manager_init() so that it is always valid.
In hda_component_manager_bind() do not clear the parent information.
Only zero-fill the per-component data ready for it to be filled in
by the components as they bind.
Previously parent->mutex was being initialized only in
hda_component_manager_bind(). This meant that it was only
initialized if all components appeared and there was a bind callback.
If there wasn't a bind the mutex object was not valid when the
Realtek driver called any of the other functions.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 047b9cbbaa ("ALSA: hda: hda_component: Protect shared data with a mutex")
Link: https://patch.msgid.link/20240826094940.45563-1-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Let the kmemdup_array() take care about multiplication
and possible overflows.
Using kmemdup_array() is more appropriate and makes the code
easier to audit.
Signed-off-by: Shen Lichuan <shenlichuan@vivo.com>
Link: https://patch.msgid.link/20240826043454.3198-1-shenlichuan@vivo.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds the HP Pavilion Aero 13 (13-bg0xxx) (year 2024) to list of
quirks for keyboard LED mute indication.
The laptop has two LEDs (one for speaker and one for mic mute). The
pre-existing quirk ALC245_FIXUP_HP_X360_MUTE_LEDS chains both the quirk for
mic and speaker mute.
Tested on 6.11.0-rc4 with the aforementioned laptop.
Signed-off-by: Hendrik Borghorst <hendrikborghorst@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240825174351.5687-1-hendrikborghorst@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
144d:c1cc requires the same workaround to enable the speaker amp
as other Samsung models with the ALC298 codec.
Signed-off-by: YOUNGJIN JOO <neoelec@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240825092515.28728-1-neoelec@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When Tegra audio drivers are built as part of the kernel image,
TIMEOUT_ERR is observed from cbb-fabric. Following is seen on
Jetson AGX Orin during boot:
[ 8.012482] **************************************
[ 8.017423] CPU:0, Error:cbb-fabric, Errmon:2
[ 8.021922] Error Code : TIMEOUT_ERR
[ 8.025966] Overflow : Multiple TIMEOUT_ERR
[ 8.030644]
[ 8.032175] Error Code : TIMEOUT_ERR
[ 8.036217] MASTER_ID : CCPLEX
[ 8.039722] Address : 0x290a0a8
[ 8.043318] Cache : 0x1 -- Bufferable
[ 8.047630] Protection : 0x2 -- Unprivileged, Non-Secure, Data Access
[ 8.054628] Access_Type : Write
[ 8.106130] WARNING: CPU: 0 PID: 124 at drivers/soc/tegra/cbb/tegra234-cbb.c:604 tegra234_cbb_isr+0x134/0x178
[ 8.240602] Call trace:
[ 8.243126] tegra234_cbb_isr+0x134/0x178
[ 8.247261] __handle_irq_event_percpu+0x60/0x238
[ 8.252132] handle_irq_event+0x54/0xb8
These errors happen when MVC device, which is a child of AHUB
device, tries to access its device registers. This happens as
part of call tegra210_mvc_reset_vol_settings() in MVC device
probe().
The root cause of this problem is, the child MVC device gets
probed before the AHUB clock gets enabled. The AHUB clock is
enabled in runtime PM resume of parent AHUB device and due to
the wrong sequence of pm_runtime_enable() in AHUB driver,
runtime PM resume doesn't happen for AHUB device when MVC makes
register access.
Fix this by calling pm_runtime_enable() for parent AHUB device
before of_platform_populate() in AHUB driver. This ensures that
clock becomes available when MVC makes register access.
Fixes: 16e1bcc2ca ("ASoC: tegra: Add Tegra210 based AHUB driver")
Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Signed-off-by: Ritu Chaudhary <rituc@nvidia.com>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://patch.msgid.link/20240823144342.4123814-3-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When using kernel with the following extra config,
- CONFIG_KASAN=y
- CONFIG_KASAN_GENERIC=y
- CONFIG_KASAN_INLINE=y
- CONFIG_KASAN_VMALLOC=y
- CONFIG_FRAME_WARN=4096
kernel detects that snd_pcm_suspend_all() access a freed
'snd_soc_pcm_runtime' object when the system is suspended, which
leads to a use-after-free bug:
[ 52.047746] BUG: KASAN: use-after-free in snd_pcm_suspend_all+0x1a8/0x270
[ 52.047765] Read of size 1 at addr ffff0000b9434d50 by task systemd-sleep/2330
[ 52.047785] Call trace:
[ 52.047787] dump_backtrace+0x0/0x3c0
[ 52.047794] show_stack+0x34/0x50
[ 52.047797] dump_stack_lvl+0x68/0x8c
[ 52.047802] print_address_description.constprop.0+0x74/0x2c0
[ 52.047809] kasan_report+0x210/0x230
[ 52.047815] __asan_report_load1_noabort+0x3c/0x50
[ 52.047820] snd_pcm_suspend_all+0x1a8/0x270
[ 52.047824] snd_soc_suspend+0x19c/0x4e0
The snd_pcm_sync_stop() has a NULL check on 'substream->runtime' before
making any access. So we need to always set 'substream->runtime' to NULL
everytime we kfree() it.
Fixes: a72706ed82 ("ASoC: codec2codec: remove ephemeral variables")
Signed-off-by: robelin <robelin@nvidia.com>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://patch.msgid.link/20240823144342.4123814-2-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add DMA support for audio function of Glenfly Arise chip, which uses
Requester ID of function 0.
Link: https://lore.kernel.org/r/CA2BBD087345B6D1+20240823095708.3237375-1-wangyuli@uniontech.com
Signed-off-by: SiyuLi <siyuli@glenfly.com>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
[bhelgaas: lower-case hex to match local code, drop unused Device IDs]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Add SOF support for ACP7.0 version based platform.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://patch.msgid.link/20240823053739.465187-3-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add acpi machine id for ACP7.0 version based platform and configure
driver data to enable SOF sound card support on newer boards.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://patch.msgid.link/20240823053739.465187-2-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There are 2G and 4G RAM versions of the Lenovo Yoga Tab 3 X90F and it
turns out that the 2G version has a DMI product name of
"CHERRYVIEW D1 PLATFORM" where as the 4G version has
"CHERRYVIEW C0 PLATFORM". The sys-vendor + product-version check are
unique enough that the product-name check is not necessary.
Drop the product-name check so that the existing DMI match for the 4G
RAM version also matches the 2G RAM version.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://patch.msgid.link/20240823074305.16873-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since commit 13f58267cd ("ASoC: soc.h: don't create dummy Component
via COMP_DUMMY()") dummy codecs declared like this:
SND_SOC_DAILINK_DEF(dummy,
DAILINK_COMP_ARRAY(COMP_DUMMY()));
expand to:
static struct snd_soc_dai_link_component dummy[] = {
};
Which means that dummy is a zero sized array and thus dais[i].codecs should
not be dereferenced *at all* since it points to the address of the next
variable stored in the data section as the "dummy" variable has an address
but no size, so even dereferencing dais[0] is already an out of bounds
array reference.
Which means that the if (dais[i].codecs->name) check added in
commit 7d99a70b65 ("ASoC: Intel: Boards: Fix NULL pointer deref
in BYT/CHT boards") relies on that the part of the next variable which
the name member maps to just happens to be NULL.
Which apparently so far it usually is, except when it isn't
and then it results in crashes like this one:
[ 28.795659] BUG: unable to handle page fault for address: 0000000000030011
...
[ 28.795780] Call Trace:
[ 28.795787] <TASK>
...
[ 28.795862] ? strcmp+0x18/0x40
[ 28.795872] 0xffffffffc150c605
[ 28.795887] platform_probe+0x40/0xa0
...
[ 28.795979] ? __pfx_init_module+0x10/0x10 [snd_soc_sst_bytcr_wm5102]
Really fix things this time around by checking dais.num_codecs != 0.
Fixes: 7d99a70b65 ("ASoC: Intel: Boards: Fix NULL pointer deref in BYT/CHT boards")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://patch.msgid.link/20240823074217.14653-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A relatively large collection of fixes here, all driver specific and
none of them particularly major, plus one MAINTAINERS update. There's
been a bunch of work on module autoloading from several people.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmbHv+8ACgkQJNaLcl1U
h9Czhgf/VTYu0+olW0SoNxGIzRSi89Sx7HFAug33EiTJ1JC5fvFxV1G94VMTPBkn
mXv+bb2WbPDSDwsehveBAxZLc1EnmqB5KZkAd/7DTuU1wVfF7PIWOAJZikc+blAJ
fYFUr+aD7dc+evcZCiUPwAPYFxuusQOQAL7Y48wrG7wOTlropJdkwugiJ4fQWIk7
6fuQ3vxwUjACTjP4u6EV+a/H+XMKLqy9D05PCMvupp+awY3HzPoan5/w5vcq7WcQ
xwzvTuz2Snn5ay83LPhyTIjGy40/O2n+LblnuqEzLD6KaPSNqGRzuCdqdACstjX+
xD/1B+wAkVG+oajXKQpu2tvEWL1iUg==
=xZ3o
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.11-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.11
A relatively large collection of fixes here, all driver specific and
none of them particularly major, plus one MAINTAINERS update. There's
been a bunch of work on module autoloading from several people.
If the timestamp of a calibration entry is 0 it is an unused entry and
must be ignored.
Some end-products reserve EFI space for calibration entries by shipping
with a zero-filled EFI file. When searching the file for calibration
data the driver must skip the empty entries. The timestamp of a valid
entry is always non-zero.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 1cad8725f2 ("ASoC: cs-amp-lib: Add helpers for factory calibration data")
Link: https://patch.msgid.link/20240822133544.304421-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For a normal calibration blob the calTarget values must be non-zero and
unique, and the calTime values must be non-zero. Don't rely on
get_random_bytes() to be random enough to guarantee this. Force the
calTarget and calTime values to be valid while retaining randomness
in the values.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 177862317a ("ASoC: cs-amp-lib: Add KUnit test for calibration helpers")
Link: https://patch.msgid.link/20240822115725.259568-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Prepare for removal of dpcm_playback and dpcm_capture flags in
dailinks.
[Kuninori adjusted Pierre-Louis's patch]
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87o75maah5.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dpcm_xxx flags are no longer needed.
We need to use xxx_only flags instead if needed, but
snd_soc_dai_link_set_capabilities() user adds dpcm_xxx if playback/capture
were available. Thus converting dpcm_xxx to xxx_only is not needed.
Just remove it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://patch.msgid.link/87r0aiaahh.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
I have been wondering why DPCM needs special flag (= dpcm_playback/capture)
to use it. Below is the history why it was added to ASoC.
(A) In beginning, there was no dpcm_xxx flag on ASoC.
It checks channels_min for DPCM, same as current non-DPCM.
Let's name it as "validation check" here.
if (rtd->dai_link->dynamic || rtd->dai_link->no_pcm) {
if (cpu_dai->driver->playback.channels_min)
playback = 1;
if (cpu_dai->driver->capture.channels_min)
capture = 1;
(B) commit 1e9de42f43 ("ASoC: dpcm: Explicitly set BE DAI link supported
stream directions") force to use dpcm_xxx flag on DPCM. According to
this commit log, this is because "Some BE dummy DAI doesn't set
channels_min for playback/capture". But we don't know which DAI is it,
and not know why it can't/don't have channels_min. Let's name it as
"no_chan_DAI" here. According to the code and git-log, it is used as
DCPM-BE and is CPU DAI. I think the correct solution was set
channels_min on "no_chan_DAI" side, not update ASoC framework side. But
everything is under smoke today.
if (rtd->dai_link->dynamic || rtd->dai_link->no_pcm) {
playback = rtd->dai_link->dpcm_playback;
capture = rtd->dai_link->dpcm_capture;
(C) commit 9b5db05936 ("ASoC: soc-pcm: dpcm: Only allow playback/capture
if supported") checks channels_min (= validation check) again. Because
DPCM availability was handled by dpcm_xxx flag at that time, but some
Sound Card set it even though it wasn't available. Clearly there's
a contradiction here. I think correct solution was update Sound Card
side instead of ASoC framework. Sound Card side will be updated to
handle this issue later (commit 25612477d2 ("ASoC: soc-dai: set
dai_link dpcm_ flags with a helper"))
if (rtd->dai_link->dynamic || rtd->dai_link->no_pcm) {
...
playback = rtd->dai_link->dpcm_playback &&
snd_soc_dai_stream_valid(cpu_dai, ...);
capture = rtd->dai_link->dpcm_capture &&
snd_soc_dai_stream_valid(cpu_dai, ...);
This (C) patch should have broken "no_chan_DAI" which doesn't have
channels_min, but there was no such report during this 4 years.
Possibilities case are as follows
- No one is using "no_chan_DAI"
- "no_chan_DAI" is no longer exist : was removed ?
- "no_chan_DAI" is no longer exist : has channels_min ?
Because of these history, this dpcm_xxx is unneeded flag today. But because
we have been used it for 10 years since (B), it may have been used
differently. For example some DAI available both playback/capture, but it
set dpcm_playback flag only, in this case dpcm_xxx flag is used as
availability limitation. We can use playback_only flag instead in this
case, but it is very difficult to find such DAI today.
Let's add grace time to remove dpcm_playback/capture flag.
This patch don't use dpcm_xxx flag anymore, and indicates warning to use
xxx_only flag if both playback/capture were available but using only
one of dpcm_xxx flag, and not using xxx_only flag.
Link: https://lore.kernel.org/r/87edaym2cg.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://patch.msgid.link/87seuyaahn.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Dell platform with ALC215 ALC285 ALC289 ALC225 ALC295 ALC299, plug
headphone or headset.
It had a chance to get no sound from headphone.
Replace depop procedure will solve this issue.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/d0de1b03fd174520945dde216d765223@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Dell platform, plug headphone or headset, it had a chance to get no
sound from headphone.
Replace depop procedure will solve this issue.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/bb8e2de30d294dc287944efa0667685a@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add MODULE_DEVICE_TABLE(), so modules could be properly
autoloaded based on the alias from platform_device_id table.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Link: https://patch.msgid.link/20240821061955.2273782-3-lihongbo22@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add MODULE_DEVICE_TABLE(), so modules could be properly
autoloaded based on the alias from platform_device_id table.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Link: https://patch.msgid.link/20240821061955.2273782-2-lihongbo22@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc-pcm.c has snd_soc_dpcm_stream_lock_irqsave_nested() /
snd_soc_dpcm_stream_unlock_irqrestore() helper function,
but it is almost nothing help. It just makes a code complex.
Let's remove it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87msl6aa2c.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove unnecessary line feed for tasdevice_codec_remove.
Add comma at the end the last member of the array.
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Link: https://patch.msgid.link/20240821072527.1294-1-baojun.xu@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Don't populate the read-only array minCode_param on the stack at
run time, instead make it static const.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://patch.msgid.link/20240821114927.520193-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The HDA driver cannot assume that the order that the devices are
specified in the cirrus,dev-index matches the order of calibration
entries.
Only a calibration entry with a matching silicon id will be used.
Fixes: cfa43aaa79 ("ALSA: hda: cs35l56: Apply amp calibration from EFI data")
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Link: https://patch.msgid.link/20240821124711.44325-1-simont@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The driver does not access reset GPIO in atomic contexts so it is usable
with GPIOs that may sleep during access. Switch to using
gpiod_set_value_cansleep().
Also the reset GPIO is configured as output at the time it is acquired,
there is no need to use gpiod_direction_output() when executing reset
sequence.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://patch.msgid.link/ZsPty8oNMQk4YTl1@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:
Intel new platforms can have up to 5 SoundWire links.
This series does not apply to SoundWire tree due to recent changes in
machine driver. Can we go via ASoC tree with Vinod's Acked-by tag?
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
A spiritual successor to haswell/baytrail removal series [1].
The avs-driver found in sound/soc/intel/avs is a direct replacement to
the existing skylake-driver. It covers all features supported by it and
more and aligns with the recommended flows and requirements based on
Windows driver equivalent.
The skylake-driver related UAPI has been removed with "ASoC: Drop
soc-topology ABI v4 support" [2].
For the official kernel tree the deprecation begun with v6.0. Most
skylake-drivers users moved to avs- or SOF-driver when AudioDSP
capabilities are available on the platform or to snd-hda-intel
(sound/pci/hda) when such capabilities are not.
For the supported trees the deprecation begun with v5.4 with v5.15 being
the first where the skylake-driver is disabled entirely.
All machine board drivers that consume this DSP driver have their
replacements present within sound/soc/intel/avs/boards/ directory.
[1]: https://lore.kernel.org/alsa-devel/20201006064907.16277-1-cezary.rojewski@intel.com/
[2]: https://lore.kernel.org/alsa-devel/20240403091629.647267-1-cezary.rojewski@intel.com/
The existing CS35L56 products can make use of the fixup function that
works out the component binding details so we can remove the fixed
configuration fixup functions.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Link: https://patch.msgid.link/20240819123736.111946-1-simont@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The skylake-driver is deprecated in favour of the avs-driver. As the
latter supports all configurations of its predecessor and more, update
the existing selection mechanism to acknowledge the SST flag.
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20240814083929.1217319-15-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The avs-driver found in sound/soc/intel/avs is a direct replacement to
the existing skylake-driver. It covers all features supported by it and
more and aligns with the recommended flows and requirements based on
Windows driver equivalent.
For the official kernel tree the deprecation begun with v6.0. Most
skylake-drivers users moved to avs- or SOF-driver when AudioDSP
capabilities are available on the platform or to snd-hda-intel
(sound/pci/hda) when such capabilities are not.
For the supported trees the deprecation begun with v5.4 with v5.15 being
the first where the skylake-driver is disabled entirely.
All machine board drivers that consume the DSP driver have their
replacements present within sound/soc/intel/avs/boards/ directory.
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20240814083929.1217319-14-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver has no users.
Succeeded by:
- avs_nau8825 (./intel/avs/boards/nau8825.c)
- avs_max98357a (./intel/avs/boards/max98357a.c)
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20240814083929.1217319-13-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver has no users.
Succeeded by:
- avs_nau8825 (./intel/avs/boards/nau8825.c)
- avs_ssm4567 (./intel/avs/boards/ssm4567.c)
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20240814083929.1217319-12-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver has no users.
Succeeded by:
- avs_rt286 (./intel/avs/boards/rt286.c)
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20240814083929.1217319-11-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver has no users.
Succeeded by:
- avs_da7219 (./intel/avs/boards/da7219.c)
- avs_max98357a (./intel/avs/boards/max98357a.c)
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20240814083929.1217319-10-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver has no users.
Succeeded by:
- avs_da7219 (./intel/avs/boards/da7219.c)
- avs_max98927 (./intel/avs/boards/max98927.c)
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20240814083929.1217319-9-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver has no users.
Succeeded by:
- avs_rt5660 (./intel/avs/boards/rt5660.c)
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20240814083929.1217319-8-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver has no users.
Succeeded by:
- avs_rt5663 (./intel/avs/boards/rt5663.c)
- avs_max98927 (./intel/avs/boards/max98927.c)
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20240814083929.1217319-7-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver has no users.
Succeeded by:
- avs_rt5514 (./intel/avs/boards/rt5514.c)
- avs_rt5663 (./intel/avs/boards/rt5663.c)
- avs_max98927 (./intel/avs/boards/max98927.c)
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20240814083929.1217319-6-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver has no users.
Succeeded by:
- avs_da7219 (./intel/avs/boards/da7219.c)
- avs_max98357a (./intel/avs/boards/max98357a.c)
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20240814083929.1217319-5-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver has no users.
Succeeded by:
- avs_rt298 (./intel/avs/boards/rt298.c)
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20240814083929.1217319-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Preparation step in the skylake-driver removal process.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20240814083929.1217319-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The avs-driver succeeds the skylake-driver. It suppots all
configurations of its predecessor and more. Reflect that in the existing
selection table.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20240814083929.1217319-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The definitions are currently duplicated in intel-sdw-acpi.c and
sof_sdw.c. Move the definition to the sdw_intel.h header, and change
the prefix to make it Intel-specific.
No functionality change in this patch.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240819005548.5867-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
All callers of get_event_dest_clienter() pass 0 to the filter
argument, and it means that the check there is utterly redundant.
Drop the superfluous filter argument and its check as a code cleanup.
Link: https://patch.msgid.link/20240819084757.11902-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
UMP events don't use the event type field, hence it's invalid to apply
the filter, which may drop the events unexpectedly.
Skip the event filtering for UMP events, instead.
Fixes: 46397622a3 ("ALSA: seq: Add UMP support")
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240819084156.10286-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
HP Pavilion Plus 14-ey0xxx needs existing quirk
ALC245_FIXUP_HP_X360_MUTE_LEDS to enable its mute/micmute LEDs.
Signed-off-by: John Sweeney <john.sweeney@runbox.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/E1sfhrD-0007TA-HC@rmmprod05.runbox
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Implement two ioctl calls in order to support virtual userspace-driven
ALSA timers.
The first ioctl is SNDRV_TIMER_IOCTL_CREATE, which gets the
snd_timer_uinfo struct as a parameter and puts a file descriptor of a
virtual timer into the `fd` field of the snd_timer_unfo structure. It
also updates the `id` field of the snd_timer_uinfo struct, which
provides a unique identifier for the timer (basically, the subdevice
number which can be used when creating timer instances).
This patch also introduces a tiny id allocator for the userspace-driven
timers, which guarantees that we don't have more than 128 of them in the
system.
Another ioctl is SNDRV_TIMER_IOCTL_TRIGGER, which allows us to trigger
the virtual timer (and calls snd_timer_interrupt for the timer under
the hood), causing all of the timer instances binded to this timer to
execute their callbacks.
The maximum amount of ticks available for the timer is 1 for the sake of
simplicity of the userspace API. 'start', 'stop', 'open' and 'close'
callbacks for the userspace-driven timers are empty since we don't
really do any hardware initialization here.
Suggested-by: Axel Holzinger <aholzinger@gmx.de>
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240813120701.171743-4-ivan.orlov0322@gmail.com
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from spi_device_id table.
Fixes: 7b2f3eb492 ("ALSA: hda: cs35l41: Add support for CS35L41 in HDA systems")
Signed-off-by: Yuntao Liu <liuyuntao12@huawei.com>
Link: https://patch.msgid.link/20240815091312.757139-1-liuyuntao12@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When ACP is not powered on by default, acp power on sequence explicitly
invoked by programming pgfsm control mask. The existing implementation
checks the same PGFSM status mask and programs the same PGFSM control mask
in all ACP variants which breaks acp power on sequence for ACP6.0 and
ACP6.3 variants. So to fix this issue, update ACP pgfsm control mask and
status mask based on acp descriptor rev field, which will vary based on
acp variant.
Fixes: 846aef1d7c ("ASoC: SOF: amd: Add Renoir ACP HW support")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://patch.msgid.link/20240816070328.610360-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
for_each_child_of_node can help to iterate through the device_node,
and we don't need to use while loop. No functional change with this
conversion.
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Link: https://patch.msgid.link/20240816021826.65190-1-zhangzekun11@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Remove unnecessary line feed for tasdevice_dsp_create_ctrls,
and remove two unnecessary spaces in tas2563_digital_gain_get
and tas2563_digital_gain_put.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20240815042138.1997-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from platform_device_id table.
Fixes: 9d8a7be88b ("ASoC: amd: acp: Add legacy sound card support for Chrome audio")
Signed-off-by: Yuntao Liu <liuyuntao12@huawei.com>
Link: https://patch.msgid.link/20240815084923.756476-1-liuyuntao12@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add AFE Control Register 0 to the volatile_register.
AFE_DAC_CON0 can be modified by both the SOF and ALSA drivers.
If this register is read and written in cache mode, the cached value
might not reflect the actual value when the register is modified by
another driver. It can cause playback or capture failures. Therefore,
it is necessary to add AFE_DAC_CON0 to the list of volatile registers.
Signed-off-by: YR Yang <yr.yang@mediatek.com>
Reviewed-by: Fei Shao <fshao@chromium.org>
Reviewed-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://patch.msgid.link/20240801084326.1472-1-yr.yang@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc-pcm.c has snd_soc_dpcm_stream_{lock/unlock}_irq() helper function,
but it is almost nothing help. It just makes a code complex.
Let's remove it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/875xsnll85.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace SET_RUNTIME_PM_OPS()/SET SYSTEM_SLEEP_PM_OPS() with their modern
RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() alternatives.
The combined usage of pm_ptr() and RUNTIME_PM_OPS/SYSTEM_SLEEP_PM_OPS()
allows the compiler to evaluate if the runtime suspend/resume() functions
are used at build time or are simply dead code.
This allows removing the CONFIG_PM ifdefery from the runtime
suspend/resume() functions.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Link: https://patch.msgid.link/20240808184944.267686-7-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace SET_SYSTEM_SLEEP_PM_OPS() with its modern SYSTEM_SLEEP_PM_OPS()
alternative.
The combined usage of pm_sleep_ptr() and SYSTEM_SLEEP_PM_OPS() allows
the compiler to evaluate if the suspend/resume() functions
are used at build time or are simply dead code.
This allows removing the CONFIG_PM_SLEEP ifdefery from the
suspend/resume() functions.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Link: https://patch.msgid.link/20240808184944.267686-6-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace SET_SYSTEM_SLEEP_PM_OPS() with its modern SYSTEM_SLEEP_PM_OPS()
alternative.
The combined usage of pm_sleep_ptr() and SYSTEM_SLEEP_PM_OPS() allows
the compiler to evaluate if the suspend/resume() functions are used at
build time or are simply dead code.
This allows removing the CONFIG_PM_SLEEP ifdefery from the
suspend/resume() functions.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Link: https://patch.msgid.link/20240808184944.267686-5-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace SET_RUNTIME_PM_OPS()/SET SYSTEM_SLEEP_PM_OPS() with their modern
RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() alternatives.
The combined usage of pm_ptr() and RUNTIME_PM_OPS/SYSTEM_SLEEP_PM_OPS()
allows the compiler to evaluate if the runtime suspend/resume() functions
are used at build time or are simply dead code.
This allows removing the CONFIG_PM ifdefery from the runtime
suspend/resume() functions.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Link: https://patch.msgid.link/20240808184944.267686-4-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace SET_RUNTIME_PM_OPS() with its modern RUNTIME_PM_OPS()
alternative.
The combined usage of pm_ptr() and RUNTIME_PM_OPS() allows the
compiler to evaluate if the runtime suspend/resume() functions
are used at build time or are simply dead code.
This allows removing the CONFIG_PM ifdefery from the runtime
suspend/resume() functions.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Link: https://patch.msgid.link/20240808184944.267686-3-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace SET_RUNTIME_PM_OPS()/SET SYSTEM_SLEEP_PM_OPS() with their modern
RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() alternatives.
The combined usage of pm_ptr() and RUNTIME_PM_OPS/SYSTEM_SLEEP_PM_OPS()
allows the compiler to evaluate if the runtime suspend/resume() functions
are used at build time or are simply dead code.
This allows removing the CONFIG_PM ifdefery from the runtime
suspend/resume() functions.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Link: https://patch.msgid.link/20240808184944.267686-2-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace SET_RUNTIME_PM_OPS()/SET SYSTEM_SLEEP_PM_OPS() with their modern
RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() alternatives.
The combined usage of pm_ptr() and RUNTIME_PM_OPS/SYSTEM_SLEEP_PM_OPS()
allows the compiler to evaluate if the runtime suspend/resume() functions
are used at build time or are simply dead code.
This allows removing the CONFIG_PM ifdefery from the runtime
suspend/resume() functions.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Link: https://patch.msgid.link/20240808184944.267686-1-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The device never comes online from a reset/shutdown state, because the
driver de-asserts reset GPIO when requesting it but then, at the end of
probe() through wcd937x_reset(), leaves it asserted.
Cc: stable@vger.kernel.org
Fixes: 9be3ec196d ("ASoC: codecs: wcd937x: add wcd937x codec driver")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240806114913.40022-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The data conversion is done rather by a wrong function. We convert to
BE32, not from BE32. Although the end result must be same, this was
complained by the compiler.
Fix the code again and align with another similar function
tas2563_apply_calib() that does already right.
Fixes: 3beddef84d ("ALSA: hda/tas2781: fix wrong calibrated data order")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202408141630.DiDUB8Z4-lkp@intel.com/
Link: https://patch.msgid.link/20240814100500.1944-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Apply the newly introduced macros for reduce the complex expressions
and cast in the quirk table definitions. It results in a significant
code reduction, too.
There should be no functional changes.
Link: https://patch.msgid.link/20240814134844.2726-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Many entries in the USB-audio quirk tables have relatively complex
expressions. For improving the readability, introduce a few macros.
Those are applied in the following patch.
Link: https://patch.msgid.link/20240814134844.2726-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The driver doesn't create any ALSA controls for firmware controls, so it
shouldn't be calling hda_cs_dsp_control_remove().
commit 312c04cee4 ("ALSA: hda: cs35l41: Stop creating ALSA Controls for
firmware coefficients") removed the call to hda_cs_dsp_add_controls() but
didn't remove the call for destroying those controls.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 312c04cee4 ("ALSA: hda: cs35l41: Stop creating ALSA Controls for firmware coefficients")
Link: https://patch.msgid.link/20240813113209.648-1-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
'struct reg_sequence' is not modified in this driver.
Constifying this structure moves some data to a read-only section, so
increase overall security.
While at it, remove rt1318_INIT_REG_LEN which is ununsed.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
22062 4859 32 26953 6949 sound/soc/codecs/rt1318.o
After:
=====
text data bss dec hex filename
24742 2171 32 26945 6941 sound/soc/codecs/rt1318.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://patch.msgid.link/96561dd2962d4312eb0e68ab850027f44350d070.1722952334.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace a comma between expression statements by a semicolon.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://patch.msgid.link/20240812100429.2594745-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
'struct reg_sequence' and 'struct reg_sequences' are not modified in this
drivers.
Constifying these structures moves some data to a read-only section, so
increase overall security.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
54409 7881 64 62354 f392 sound/soc/codecs/cs43130.o
After:
=====
text data bss dec hex filename
55562 6729 64 62355 f393 sound/soc/codecs/cs43130.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://patch.msgid.link/5b906a0cc9b7be15d0d6310069f54254a75ea767.1722951770.git.christophe.jaillet@wanadoo.fr
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Addition of 'dsp_intr_base' to ACP error register offsets points to
wrong register offsets in irq handler. Correct the acp error register
offsets. ACP error status register offset and acp error reason register
offset got changed from ACP6.0 onwards. Add 'acp_error_stat' and
'acp_sw0_i2s_err_reason' as descriptor fields in sof_amd_acp_desc
structure and update the values based on the ACP variant.
>From Rembrandt platform onwards, errors related to SW1 Soundwire manager
instance/I2S controller connected on P1 power tile is reported with
ACP_SW1_I2S_ERROR_REASON register. Add conditional check for the same.
Fixes: 96eb818510 ("ASoC: SOF: amd: add interrupt handling for SoundWire manager devices")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://patch.msgid.link/20240813105944.3126903-2-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The existing code modifies IRAM and DRAM size after sha dma start for
vangogh platform. The problem with this sequence is that it might cause
sha dma failure when firmware code binary size is greater than the default
IRAM size. To fix this issue, Move the iram-dram fence register sequence
prior to sha dma start.
Fixes: 094d11768f ("ASoC: SOF: amd: Skip IRAM/DRAM size modification for Steam Deck OLED")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://patch.msgid.link/20240813105944.3126903-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver doesn't create any ALSA controls for firmware controls, so it
shouldn't be calling hda_cs_dsp_control_remove().
commit 34e1b1bb73 ("ALSA: hda: cs35l56: Stop creating ALSA controls for
firmware coefficients") removed the call to hda_cs_dsp_add_controls() but
didn't remove the call for destroying those controls.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 34e1b1bb73 ("ALSA: hda: cs35l56: Stop creating ALSA controls for firmware coefficients")
Link: https://patch.msgid.link/20240813110750.2814-1-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Wrong calibration data order cause sound too low in some device.
Fix wrong calibrated data order, add calibration data converssion
by get_unaligned_be32() after reading from UEFI.
Fixes: 5be27f1e3e ("ALSA: hda/tas2781: Add tas2781 HDA driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Link: https://patch.msgid.link/20240813043749.108-1-shenghao-ding@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For any changes of struct fd representation we need to
turn existing accesses to fields into calls of wrappers.
Accesses to struct fd::flags are very few (3 in linux/file.h,
1 in net/socket.c, 3 in fs/overlayfs/file.c and 3 more in
explicit initializers).
Those can be dealt with in the commit converting to
new layout; accesses to struct fd::file are too many for that.
This commit converts (almost) all of f.file to
fd_file(f). It's not entirely mechanical ('file' is used as
a member name more than just in struct fd) and it does not
even attempt to distinguish the uses in pointer context from
those in boolean context; the latter will be eventually turned
into a separate helper (fd_empty()).
NOTE: mass conversion to fd_empty(), tempting as it
might be, is a bad idea; better do that piecewise in commit
that convert from fdget...() to CLASS(...).
[conflicts in fs/fhandle.c, kernel/bpf/syscall.c, mm/memcontrol.c
caught by git; fs/stat.c one got caught by git grep]
[fs/xattr.c conflict]
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Registering Numark Party Mix II fails with error 'bogus bTerminalLink 1'.
The problem stems from the driver not being able to find input/output
terminals required to configure audio streaming. The information about
those terminals is stored in AudioControl Interface. Numark device
contains 2 AudioControl Interfaces and the driver checks only one of them.
According to the USB standard, a device can have multiple audio functions,
each represented by Audio Interface Collection. Every audio function is
considered to be closed box and will contain unique AudioControl Interface
and zero or more AudioStreaming and MIDIStreaming Interfaces.
The Numark device adheres to the standard and defines two audio functions:
- MIDIStreaming function
- AudioStreaming function
It starts with MIDI function, followed by the audio function. The driver
saves the first AudioControl Interface in `snd_usb_audio` structure
associated with the entire device. It then attempts to use this interface
to query for terminals and clocks. However, this fails because the correct
information is stored in the second AudioControl Interface, defined in the
second Audio Interface Collection.
This patch introduces a structure holding association between each
MIDI/Audio Interface and its corresponding AudioControl Interface,
instead of relying on AudioControl Interface defined for the entire
device. This structure is populated during usb probing phase and leveraged
later when querying for terminals and when sending USB requests.
Alternative solutions considered include:
- defining a quirk for Numark where the order of interface is manually
changed, or terminals are hardcoded in the driver. This solution would
have fixed only this model, though it seems that device is USB compliant,
and it also seems that other devices from this company may be affected.
What's more, it looks like products from other manufacturers have similar
problems, i.e. Rane One DJ console
- keeping a list of all AudioControl Interfaces and querying all of them
to find required information. That would have solved my problem and have
low probability of breaking other devices, as we would always start with
the same logic of querying first AudioControl Interface. This solution
would not have followed the standard though.
This patch preserves the `snd_usb_audio.ctrl_intf` variable, which holds
the first AudioControl Interface, and uses it as a fallback when some
interfaces are not parsed correctly and lack an associated AudioControl
Interface, i.e., when configured via quirks.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217865
Signed-off-by: Karol Kosik <k.kosik@outlook.com>
Link: https://patch.msgid.link/AS8P190MB1285893F4735C8B32AD3886BEC852@AS8P190MB1285.EURP190.PROD.OUTLOOK.COM
Signed-off-by: Takashi Iwai <tiwai@suse.de>
These files do not use any macros defined in <linux/version.h>.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
This patch enables the TI TAS2781 amplifier SoC for the ASUS ROG ALLY X.
This is a design change from the original ASUS ROG ALLY, creating the need
for this patch. All other Realtek Codec settings seem to be re-used from
the original ROG ALLY design (on the ROG ALLY X). This patch maintains the
previous settings for the Realtek codec portion, but enables the I2C
binding for the TI TAS2781 amplifier (instead of the Cirrus CS35L41 amp
used on the original ASUS ROG ALLY).
One other requirement must be met for audio to work on the ASUS ROG ALLY X.
A proper firmware file in the correct location with a proper symlink. We
had reached out to TI engineers and confirmed that the firmware found in
the Windows' driver package has a GPL license. Bazzite Github is hosting
this firmware file for now until proper linux-firmware upstreaming can
occur. https://github.com/ublue-os/bazzite
This firmware file should be placed in
/usr/lib/firmware/ti/tas2781/TAS2XXX1EB3.bin with a symlink to it from
/usr/lib/firmware/TAS2XXX1EB3.bin
Co-developed by: Kyle Gospodnetich <me@kylegospodneti.ch>
Signed-off-by: Kyle Gospodnetich <me@kylegospodneti.ch>
Co-developed by: Jan Drogehoff <sentrycraft123@gmail.com>
Signed-off-by: Jan Drogehoff <sentrycraft123@gmail.com>
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Tested-by: Richard Alvarez <alvarez.richard@gmail.com>
Tested-by: Miles Montierth <cyber_dopamine@intheblackmedia.com>
Signed-off-by: Jonathan LoBue <jlobue10@gmail.com>
Link: https://patch.msgid.link/20240812045325.47736-1-jlobue10@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some of these laptop models have quirk IDs that are identical but have
different amplifier parts fitted, this difference is described in the
ACPI information.
The solution introduced for this product family can derive the required
component binding information from ACPI instead of hardcoding it,
supports the new variants of the CS35L56 being used and has generalized
naming that makes it applicable to other ALC+amp combinations.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20240802152215.20831-4-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix noise from speakers connected to AUX port when no sound is playing.
The problem occurs because the `alc_shutup_pins` function includes
a 0x10ec0257 vendor ID, which causes noise on Lenovo IdeaPad 3 15IAU7 with
Realtek ALC257 codec when no sound is playing.
Removing this vendor ID from the function fixes the bug.
Fixes: 70794b9563 ("ALSA: hda/realtek: Add more codec ID to no shutup pins list")
Signed-off-by: Parsa Poorshikhian <parsa.poorsh@gmail.com>
Link: https://patch.msgid.link/20240810150939.330693-1-parsa.poorsh@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent addition of a sanity check for a too low start tick time
seems breaking some applications that uses aloop with a certain slave
timer setup. They may have the initial resolution 0, hence it's
treated as if it were a too low value.
Relax and skip the check for the slave timer instance for addressing
the regression.
Fixes: 4a63bd179f ("ALSA: timer: Set lower bound of start tick time")
Cc: <stable@vger.kernel.org>
Link: https://github.com/raspberrypi/linux/issues/6294
Link: https://patch.msgid.link/20240810084833.10939-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds an xrun counter to snd_pcm_substream as an alternative
to using logs from XRUN_DEBUG_BASIC. The counter provides a way to track
the number of xrun occurences, accessible through the /proc interface.
The counter is enabled when CONFIG_SND_PCM_XRUN_DEBUG is set.
Example output:
$ cat /proc/asound/card0/pcm9p/sub0/status
owner_pid : 1425
trigger_time: 235.248957291
tstamp : 0.000000000
delay : 1912
avail : 480
avail_max : 1920
-----
hw_ptr : 672000
appl_ptr : 673440
xrun_counter: 3 # (new row)
Signed-off-by: Norman Bintang <normanbt@chromium.org>
Reviewed-by: Chih-Yang Hsia <paulhsia@chromium.org>
Tested-by: Chih-Yang Hsia <paulhsia@chromium.org>
Reviewed-by: David Riley <davidriley@chromium.org>
Link: https://patch.msgid.link/20240809140648.3414349-1-normanbt@chromium.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add missing input gain and master output mixer controls for
RME Babyface Pro.
This patch implements:
1. Input gain controls for 2 mic and 2 line inputs
2. Master output volume controls for all 12 output channels
These additions allow for more complete control of the Babyface Pro under
Linux.
Signed-off-by: Stefan Stistrup <sstistrup@gmail.com>
Link: https://patch.msgid.link/20240809204922.20112-1-sstistrup@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent cleanup in ALSA control core made no difference between
snd_ctl_find_id_mixer() and snd_ctl_find_id_mixer_locked(), and the
latter is to be dropped. The only user of the left API was ASoC, and
that's snd_soc_card_get_kcontrol_locked() and
snd_soc_component_get_kcontrol_locked().
This patch drops those functions and rewrites those users to call the
variant without locked instead. The test of the API became
superfluous, hence dropped as well.
As all callers of snd_ctl_find_id_mixer_locked() are gone,
snd_ctl_find_id_mixer_locked() is finally dropped, too.
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240809104234.8488-4-tiwai@suse.de
For a fast look-up of a control element via either numid or name
matching (enabled via CONFIG_SND_CTL_FAST_LOOKUP), a locking isn't
needed at all thanks to Xarray. OTOH, the locking is still needed for
a slow linked-list traversal, and that's rather a rare case.
In this patch, we reduce the use of locking at snd_ctl_find_*() API
functions, and switch from controls_rwsem to controls_rwlock for
avoiding unnecessary lock inversions. This also resulted in a nice
cleanup, as *_unlocked() version of snd_ctl_find_*() APIs can be
dropped.
snd_ctl_find_id_mixer_unlocked() is still left just as an alias of
snd_ctl_find_id_mixer(), since soc-card.c has a wrapper and there are
several users. Once after converting there, we can remove it later.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240809104234.8488-3-tiwai@suse.de
We'll re-use the existing rwlock for the protection of control list
lookup, too, and now rename it to a more generic name.
This is a preliminary change, only the rename of the struct field
here, no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240809104234.8488-2-tiwai@suse.de
Quite a lot of fixes have come in since the merge window, there's some
repetitive fixes over the Qualcomm drivers increasing the patch count,
along with a large batch of fixes from Cirrus. We also have some quirks
and some individual fixes.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAma1PWoACgkQJNaLcl1U
h9BWNgf+PMiOLGbC57S4FRI0Ve05jGbfX5HTFAsgCy0D1TnjJTt8XM8fAqkDux1f
fvcjRVpaIrBIu9XY2vtC35C6XcHBcB7WsgiIF+pFCe9vwZy1avB+lA0vCogyM1Fv
ToK/ssVWUnjKl2ClJ2faBhyYivleXZoTCSSXYOu3NL6owC8jWXPe9zMlfBGGkqUV
bIz6hQCJPhAm7j0H07zvT/ItwoWsvPRiHPkHbzHp7tb8rH09m4JWAseufQ+HSIRj
QzQ4u/S0HEt/e2fV+TFqfBgZzHIaKhx8uUnIhvCTGhz+42a+niyiV9du987IaLqW
QmL5YDASem7UnlTil+mpaQBy5k/NIQ==
=P4XX
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.11-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.11
Quite a lot of fixes have come in since the merge window, there's some
repetitive fixes over the Qualcomm drivers increasing the patch count,
along with a large batch of fixes from Cirrus. We also have some quirks
and some individual fixes.
Merge series from Dmitry Baryshkov <dmitry.baryshkov@linaro.org>:
While debugging broken audio issues on some of Qualcomm platforms I
stumbled upon the kernel not providing the actual error information.
It prints an error from the wsa_macro driver, but the actual issue is in
the VA macro driver. Add error message to point to the actual error
location.
va_macro 3370000.codec: Unknown VA Codec version, ID: 00 / 0f / 00
wsa_macro 3240000.codec: Unsupported Codec version (0)
Merge series from Linus Walleij <linus.walleij@linaro.org>:
The TI TAS drivers use some legacy GPIO code and headers,
this series fixes it up.
The TAS2781 is a special case since it adds a handful of
lines of deviating code to reconfigure a GPIO line for
IRQ mode and then never actually use the IRQ obtained in
the code. Is the line used by autonomous hardware? I'm
puzzled by this.
Anyways the patch suggest how to solve this properly by
fixing the parent irqchip and I'm happy to help.
Device tuning files made with early revision tooling may contain
configuration that can unmask IRQ signals that are owned by the host.
Adding a safe default to the regmap patch ensures that the hardware
matches the driver expectations.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Link: https://patch.msgid.link/20240807142648.46932-1-simont@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With PREEMPT_RT enabled a spinlock_t becomes a sleeping lock.
This is usually not a problem with spinlocks used in IRQ context since
IRQ handlers get threaded. However, if IRQF_ONESHOT is set, the primary
handler won't be force-threaded and runs always in hardirq context. This is
a problem because spinlock_t requires a preemptible context on PREEMPT_RT.
In this particular instance, regmap mmio uses spinlock_t to protect the
register access and IRQF_ONESHOT is set on the IRQ. In this case, it is
actually better to do everything in threaded handler and it solves the
problem with PREEMPT_RT.
Reported-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Closes: https://lore.kernel.org/linux-amlogic/20240729131652.3012327-1-avkrasnov@salutedevices.com
Suggested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Fixes: b11d26660d ("ASoC: meson: axg-fifo: use threaded irq to check periods")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20240807162705.4024136-1-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We find that we need to set snd_jack_types to 0. If not,
there will be a probability of button detection errors
Signed-off-by: Zhang Yi <zhangyi@everest-semi.com>
Link: https://patch.msgid.link/20240807025356.24904-2-zhangyi@everest-semi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Lenovo Thinkpad E14 Gen 6 (model type 21M3)
needs a quirk entry for internal mic to work.
Signed-off-by: Krzysztof Stępniak <kfs.szk@gmail.com>
Link: https://patch.msgid.link/20240807001219.1147-1-kfs.szk@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use snd_pcm_rate_to_rate_bit() helper provided by Alsa instead
re-implementing it. This reduce code duplication and helps when
changing some Alsa definition is necessary.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://patch.msgid.link/20240808134857.86749-1-jbrunet@baylibre.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In the previous change for swapping the power_ref and controls_rwsem
lock order, the code path for the compat layer was forgotten.
This patch covers the remaining code.
Fixes: fcc62b1910 ("ALSA: control: Take power_ref lock primarily")
Link: https://patch.msgid.link/20240808163128.20383-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The call of usb_set_interface() and a delay are superfluous when the
device has been already disconnected. Add a disconnection check
before doing it.
Link: https://patch.msgid.link/20240808091522.31415-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The current MIDI input flush on HDSP and HDSPM drivers relies on the
hardware reporting the right value. If the hardware doesn't give the
proper value but returns -1, it may be stuck at an infinite loop.
Add a counter and break if the loop is unexpectedly too long.
Link: https://patch.msgid.link/20240808091513.31380-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ASIHPI driver stores some values in the static array upon a response
from the driver, and its index depends on the firmware. We shouldn't
trust it blindly.
This patch adds a sanity check of the array index to fit in the array
size.
Link: https://patch.msgid.link/20240808091454.30846-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
At the code refactoring of USB-audio quirk handling, I assumed that
the quirk entries of Stanton ScratchAmp devices were only about the
device name, and moved them completely into the rename table.
But it seems that the device requires the quirk entry so that it's
probed by the driver itself.
This re-adds back the quirk entries of ScratchAmp, but in a
minimalistic manner.
Fixes: 5436f59bc5 ("ALSA: usb-audio: Move device rename and profile quirks to an internal table")
Link: https://patch.msgid.link/20240808081803.22300-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Move the conflicting declaration to the end of the structure. Notice
that `struct snd_sof_pcm` ends in a flexible-array member through
`struct snd_soc_tplg_pcm` -> `struct snd_soc_tplg_private`.
Whith this, fix the following warnings:
sound/soc/sof/sof-audio.h:350:33: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
./include/trace/events/../../../sound/soc/sof/sof-audio.h:350:33: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
sound/soc/amd/../sof/amd/../sof-audio.h:350:33: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
sound/soc/sof/amd/../sof-audio.h:350:33: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
sound/soc/sof/intel/../sof-audio.h:350:33: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
sound/soc/sof/mediatek/mt8186/../../sof-audio.h:350:33: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
sound/soc/sof/mediatek/mt8195/../../sof-audio.h:350:33: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://patch.msgid.link/ZrDvt6eyeFyajq6l@cute
Signed-off-by: Mark Brown <broonie@kernel.org>
Add ZSC Control register programming sequence for ACP D0 and D3 state
transitions for ACP7.0 onwards. This will allow ACP to enter low power
state when ACP enters D3 state. When ACP enters D0 State, ZSC control
should be disabled.
Tested-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://patch.msgid.link/20240807085154.1987681-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As module device table added for AMD SoundWire machine driver MODULE_ALIAS
is not required. Remove MODULE_ALIAS for AMD SoundWire machine driver.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240807050846.1616725-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that regmap_read_bypassed() has been added to the kernel it is
preferable to wake the device with a read rather than a write as the
utility function can be called at a time before the device has been
identified.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Link: https://patch.msgid.link/20240807142715.47077-1-simont@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that all users of snd_print*() are gone, let's drop the functions
completely. This also makes CONFIG_SND_VERBOSE_PRINTK redundant, and
it's dropped, too.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-55-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
The debug prints with a special macro snd_printddd() are replaced with
the conditional pr_debug(). Unfortunately dev_dbg() can't be applied
well due to the lack of the reference to the device pointer.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-53-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-52-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-51-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-50-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-49-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-48-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Some superfluous debug prints are dropped, and some ambiguous messages
are slightly rephrased. The sk.dev pointer is set properly for
allowing to call dev_*() functions, too.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-45-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Some functions are changed to receive snd_card object for calling
dev_*() functions, too.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-44-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-43-tiwai@suse.de
Replace an open-coded printk warning with dev_warn() for code
simplicity and consistency.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-42-tiwai@suse.de
Use pr_debug() instead of open-coded printk().
Also drop a few snd_printdd() calls that can be better done via
ftrace.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-40-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-39-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
The device pointer is stored in struct cmdif for calling dev_*()
functions.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-38-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-37-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-36-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
The device pointer is stored in struct soundscape for calling
dev_*().
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-35-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Some functions are changed to receive a device pointer to be passed to
dev_*() calls.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-34-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Some functions are changed to receive snd_card pointer for referring
to the device pointer for dev_*() calls, too.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-31-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
The card pointer is stored in struct snd_opti9xx and snd_miro to be
referred for dev_*() calls.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-30-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
The card pointer is stored in struct snd_opl3sa2 to be referred for
dev_*() calls.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-29-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-28-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Some commented-out debug prints and dead code are dropped as well.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-27-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
For referring to the device, introduce snd_card pointer to struct
snd_es18xx.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-26-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
For referring to the device, introduce snd_card pointer to struct
snd_es1688.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-25-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-24-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-23-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-22-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-21-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Use the standard print API instead of open-coded printk().
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-20-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-19-tiwai@suse.de
There are quite a few commented-out debug prints that have never been
used in the production code. Let's rip them off for code cleanness.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-18-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-17-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-16-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-15-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
The commented old debug prints are dropped, too.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-12-tiwai@suse.de
The vx_core.dev field has never been set but referred incorrectly at
firmware loading. Pass the proper device pointer from card->dev at
request_firmware(), and drop the unused dev field from vx_core, too.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-11-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-10-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-9-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-8-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Some debug prints are cleaned up with a macro, too.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-7-tiwai@suse.de
