The typical environment where cxl_test is run, QEMU, does not support
cpu_cache_invalidate_memregion(). Add the 'test' bypass symbols to the
configuration check.
Reported-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/167026948179.3527561.4535373655515827457.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Pick up support for "XOR" interleave math when parsing ACPI CFMWS window
structures. Fix up conflicts with the RCH emulation already pending in
cxl/next.
In an RCH topology a CXL host-bridge as Root Complex Integrated Endpoint
the represents the memory expander. Unlike a VH topology there is no
CXL/PCIE Root Port that host the endpoint. The CXL subsystem maps this
as the CXL root object (ACPI0017 on ACPI based systems) targeting the
host-bridge as a dport, per usual, but then that dport directly hosts
the endpoint port.
Mock up that configuration with a 4th host-bridge that has a 'cxl_rcd'
device instance as its immediate child.
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://lore.kernel.org/r/166993046170.1882361.12460762475782283638.stgit@dwillia2-xfh.jf.intel.com
Reviewed-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
This cpupower update for Linux 6.2-rc1 consists of:
- enhancement to choose base_cpu to display default cpupower details
instead of picking cpu 0 and failing show information when it is
offline. This change ensure user will see power information on
the cpu the tool runs on.
- adds Georgian translation to cpupower documentation.
- introduces powercap intel-rapl library, powercap-info command, and
rapl monitor. This adds the ability to show the used power consumption
in for each rapl domain
-----BEGIN PGP SIGNATURE-----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=43fr
-----END PGP SIGNATURE-----
Merge tag 'linux-cpupower-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux
Pull cpupower utility updates for 6.2-rc1 from Shuah Khan:
"This cpupower update for Linux 6.2-rc1 consists of:
- enhancement to choose base_cpu to display default cpupower details
instead of picking cpu 0 and failing show information when it is
offline. This change ensure user will see power information on
the cpu the tool runs on.
- adds Georgian translation to cpupower documentation.
- introduces powercap intel-rapl library, powercap-info command, and
rapl monitor. This adds the ability to show the used power consumption
in for each rapl domain"
* tag 'linux-cpupower-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux:
cpupower: rapl monitor - shows the used power consumption in uj for each rapl domain
cpupower: Introduce powercap intel-rapl library and powercap-info command
cpupower: Add Georgian translation
tools/cpupower: Choose base_cpu to display default cpupower details
* kvm-arm64/dirty-ring:
: .
: Add support for the "per-vcpu dirty-ring tracking with a bitmap
: and sprinkles on top", courtesy of Gavin Shan.
:
: This branch drags the kvmarm-fixes-6.1-3 tag which was already
: merged in 6.1-rc4 so that the branch is in a working state.
: .
KVM: Push dirty information unconditionally to backup bitmap
KVM: selftests: Automate choosing dirty ring size in dirty_log_test
KVM: selftests: Clear dirty ring states between two modes in dirty_log_test
KVM: selftests: Use host page size to map ring buffer in dirty_log_test
KVM: arm64: Enable ring-based dirty memory tracking
KVM: Support dirty ring in conjunction with bitmap
KVM: Move declaration of kvm_cpu_dirty_log_size() to kvm_dirty_ring.h
KVM: x86: Introduce KVM_REQ_DIRTY_RING_SOFT_FULL
Signed-off-by: Marc Zyngier <maz@kernel.org>
* kvm-arm64/selftest/access-tracking:
: .
: Small series to add support for arm64 to access_tracking_perf_test and
: correct a couple bugs along the way.
:
: Patches courtesy of Oliver Upton.
: .
KVM: selftests: Build access_tracking_perf_test for arm64
KVM: selftests: Have perf_test_util signal when to stop vCPUs
Signed-off-by: Marc Zyngier <maz@kernel.org>
* kvm-arm64/selftest/s2-faults:
: .
: New KVM/arm64 selftests exercising various sorts of S2 faults, courtesy
: of Ricardo Koller. From the cover letter:
:
: "This series adds a new aarch64 selftest for testing stage 2 fault handling
: for various combinations of guest accesses (e.g., write, S1PTW), backing
: sources (e.g., anon), and types of faults (e.g., read on hugetlbfs with a
: hole, write on a readonly memslot). Each test tries a different combination
: and then checks that the access results in the right behavior (e.g., uffd
: faults with the right address and write/read flag). [...]"
: .
KVM: selftests: aarch64: Add mix of tests into page_fault_test
KVM: selftests: aarch64: Add readonly memslot tests into page_fault_test
KVM: selftests: aarch64: Add dirty logging tests into page_fault_test
KVM: selftests: aarch64: Add userfaultfd tests into page_fault_test
KVM: selftests: aarch64: Add aarch64/page_fault_test
KVM: selftests: Use the right memslot for code, page-tables, and data allocations
KVM: selftests: Fix alignment in virt_arch_pgd_alloc() and vm_vaddr_alloc()
KVM: selftests: Add vm->memslots[] and enum kvm_mem_region_type
KVM: selftests: Stash backing_src_type in struct userspace_mem_region
tools: Copy bitfield.h from the kernel sources
KVM: selftests: aarch64: Construct DEFAULT_MAIR_EL1 using sysreg.h macros
KVM: selftests: Add missing close and munmap in __vm_mem_region_delete()
KVM: selftests: aarch64: Add virt_get_pte_hva() library function
KVM: selftests: Add a userfaultfd library
Signed-off-by: Marc Zyngier <maz@kernel.org>
* kvm-arm64/selftest/linked-bps:
: .
: Additional selftests for the arm64 breakpoints/watchpoints,
: courtesy of Reiji Watanabe. From the cover letter:
:
: "This series adds test cases for linked {break,watch}points to the
: debug-exceptions test, and expands {break,watch}point tests to
: use non-zero {break,watch}points (the current test always uses
: {break,watch}point#0)."
: .
KVM: arm64: selftests: Test with every breakpoint/watchpoint
KVM: arm64: selftests: Add a test case for a linked watchpoint
KVM: arm64: selftests: Add a test case for a linked breakpoint
KVM: arm64: selftests: Change debug_version() to take ID_AA64DFR0_EL1
KVM: arm64: selftests: Stop unnecessary test stage tracking of debug-exceptions
KVM: arm64: selftests: Add helpers to enable debug exceptions
KVM: arm64: selftests: Remove the hard-coded {b,w}pn#0 from debug-exceptions
KVM: arm64: selftests: Add write_dbg{b,w}{c,v}r helpers in debug-exceptions
KVM: arm64: selftests: Use FIELD_GET() to extract ID register fields
Signed-off-by: Marc Zyngier <maz@kernel.org>
* kvm-arm64/selftest/memslot-fixes:
: .
: KVM memslot selftest fixes for non-4kB page sizes, courtesy
: of Gavin Shan. From the cover letter:
:
: "kvm/selftests/memslots_perf_test doesn't work with 64KB-page-size-host
: and 4KB-page-size-guest on aarch64. In the implementation, the host and
: guest page size have been hardcoded to 4KB. It's ovbiously not working
: on aarch64 which supports 4KB, 16KB, 64KB individually on host and guest.
:
: This series tries to fix it. After the series is applied, the test runs
: successfully with 64KB-page-size-host and 4KB-page-size-guest."
: .
KVM: selftests: memslot_perf_test: Report optimal memory slots
KVM: selftests: memslot_perf_test: Consolidate memory
KVM: selftests: memslot_perf_test: Support variable guest page size
KVM: selftests: memslot_perf_test: Probe memory slots for once
KVM: selftests: memslot_perf_test: Consolidate loop conditions in prepare_vm()
KVM: selftests: memslot_perf_test: Use data->nslots in prepare_vm()
Signed-off-by: Marc Zyngier <maz@kernel.org>
This reverts commit c4b41b83c2.
As Ian said, the "cpu-count" is not appropriate for uncore events, also it
caused a perf test failure.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221130193613.1046804-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When using "sort -nu", arm64 syscalls were lost. That is, the io_setup
syscall (number 0) and all but one (typically ftruncate; 64) of the
syscalls that are defined symbolically (like "#define __NR_ftruncate
__NR3264_ftruncate") at the point where "sort" is applied.
This creation-of-syscalls.c-scheme is, judging from comments,
copy-pasted from powerpc, and worked there because at the time, its
tools/arch/powerpc/include/uapi/asm/unistd.h had *literals*, like
"#define __NR_ftruncate 93".
With sort being numeric and the non-numeric key effectively evaluating
to 0, the sort option "-u" means these "duplicates" are removed.
There's no need to remove syscall lines with duplicate numbers for arm64
because there are none, so let's fix that by just losing the "-u".
Having the table numerically sorted on syscall-number for the rest of
the syscalls looks nice, so keep the "-n".
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Hans-Peter Nilsson <hp@axis.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20201228023941.E0DE2203B5@pchp3.se.axis.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 93315e46b0 ("perf/core: Add speculation info to branch
entries") added a new field in between type and new_type. Perf has its
own copy of this struct so update it to match the kernel side.
This doesn't currently cause any issues because new_type is only used by
the Arm BRBE driver which isn't merged yet.
Committer notes:
Is this really an ABI? How are we supposed to deal with old perf.data
files with new tools and vice versa? :-\
Fixes: 93315e46b0 ("perf/core: Add speculation info to branch entries")
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Link: https://lore.kernel.org/r/20221130165158.517385-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use the dedicated non-atomic helpers for {clear,set}_bit() and their
test variants, i.e. the double-underscore versions. Depsite being
defined in atomic.h, and despite the kernel versions being atomic in the
kernel, tools' {clear,set}_bit() helpers aren't actually atomic. Move
to the double-underscore versions so that the versions that are expected
to be atomic (for kernel developers) can be made atomic without
affecting users that don't want atomic operations.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: James Morse <james.morse@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Yury Norov <yury.norov@gmail.com>
Cc: alexandru elisei <alexandru.elisei@arm.com>
Cc: kvm@vger.kernel.org
Cc: kvmarm@lists.cs.columbia.edu
Cc: kvmarm@lists.linux.dev
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/20221119013450.2643007-6-seanjc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In check_all_cpu_dscr_defaults, opendir() opens the directory stream.
Add missing closedir() in the error path to release it.
In check_cpu_dscr_default, open() creates an open file descriptor.
Add missing close() in the error path to release it.
Fixes: ebd5858c90 ("selftests/powerpc: Add test for all DSCR sysfs interfaces")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221205084429.570654-1-linmq006@gmail.com
Both tolower and toupper are built in c functions, we should not
redefine them as this can result in a build error.
Fixes the following errors:
progs/bpf_iter_ksym.c:10:20: error: conflicting types for built-in function 'tolower'; expected 'int(int)' [-Werror=builtin-declaration-mismatch]
10 | static inline char tolower(char c)
| ^~~~~~~
progs/bpf_iter_ksym.c:5:1: note: 'tolower' is declared in header '<ctype.h>'
4 | #include <bpf/bpf_helpers.h>
+++ |+#include <ctype.h>
5 |
progs/bpf_iter_ksym.c:17:20: error: conflicting types for built-in function 'toupper'; expected 'int(int)' [-Werror=builtin-declaration-mismatch]
17 | static inline char toupper(char c)
| ^~~~~~~
progs/bpf_iter_ksym.c:17:20: note: 'toupper' is declared in header '<ctype.h>'
See background on this sort of issue:
https://stackoverflow.com/a/20582607https://gcc.gnu.org/bugzilla/show_bug.cgi?id=12213
(C99, 7.1.3p1) "All identifiers with external linkage in any of the
following subclauses (including the future library directions) are
always reserved for use as identifiers with external linkage."
This is documented behavior in GCC:
https://gcc.gnu.org/onlinedocs/gcc/Other-Builtins.html#index-std-2
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20221203010847.2191265-1-james.hilliard1@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add three tests for cgrp local storage support for sleepable progs.
Two tests can load and run properly, one for cgroup_iter, another
for passing current->cgroups->dfl_cgrp to bpf_cgrp_storage_get()
helper. One test has bpf_rcu_read_lock() and failed to load.
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221201050449.2785613-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Martin mentioned that the verifier cannot assume arguments from
LSM hook sk_alloc_security being trusted since after the hook
is called, the sk ref_count is set to 1. This will overwrite
the ref_count changed by the bpf program and may cause ref_count
underflow later on.
I then further checked some other hooks. For example,
for bpf_lsm_file_alloc() hook in fs/file_table.c,
f->f_cred = get_cred(cred);
error = security_file_alloc(f);
if (unlikely(error)) {
file_free_rcu(&f->f_rcuhead);
return ERR_PTR(error);
}
atomic_long_set(&f->f_count, 1);
The input parameter 'f' to security_file_alloc() cannot be trusted
as well.
Specifically, I investiaged bpf_map/bpf_prog/file/sk/task alloc/free
lsm hooks. Except bpf_map_alloc and task_alloc, arguments for all other
hooks should not be considered as trusted. This may not be a complete
list, but it covers common usage for sk and task.
Fixes: 3f00c52393 ("bpf: Allow trusted pointers to be passed to KF_TRUSTED_ARGS kfuncs")
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221203204954.2043348-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add MEM_RCU pointer null checking for related tests. Also
modified task_acquire test so it takes a rcu ptr 'ptr' where
'ptr = rcu_ptr->rcu_field'.
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221203184607.478314-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Expand the cxl_test topology to include CFMWS's that use XOR math
for interleave arithmetic, as defined in the CXL Specification 3.0.
With this expanded topology, cxl_test is useful for testing:
x1,x2,x4 ways with XOR interleave arithmetic.
Define the additional XOR CFMWS entries to appear only with the
module parameter interleave_arithmetic=1. The cxl_test default
continues to be modulo math.
modprobe cxl_test interleave_arithmetic=1
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/54670400cd48ba7fcc6d8ee0d6ae2276d3f51aad.1669847017.git.alison.schofield@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
A downstream port must be connected to a component register block.
For restricted hosts the base address is determined from the RCRB. The
RCRB is provided by the host's CEDT CHBS entry. Rework CEDT parser to
get the RCRB and add code to extract the component register block from
it.
RCRB's BAR[0..1] point to the component block containing CXL subsystem
component registers. MEMBAR extraction follows the PCI base spec here,
esp. 64 bit extraction and memory range alignment (6.0, 7.5.1.2.1). The
RCRB base address is cached in the cxl_dport per-host bridge so that the
upstream port component registers can be retrieved later by an RCD
(RCIEP) associated with the host bridge.
Note: Right now the component register block is used for HDM decoder
capability only which is optional for RCDs. If unsupported by the RCD,
the HDM init will fail. It is future work to bypass it in this case.
Co-developed-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Link: https://lore.kernel.org/r/Y4dsGZ24aJlxSfI1@rric.localdomain
[djbw: introduce devm_cxl_add_rch_dport()]
Link: https://lore.kernel.org/r/166993044524.1882361.2539922887413208807.stgit@dwillia2-xfh.jf.intel.com
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Accept any cxl_test topology device as the first argument in
cxl_chbs_context.
This is in preparation for reworking the detection of the component
registers across VH and RCH topologies. Move
mock_acpi_table_parse_cedt() beneath the definition of is_mock_port()
and use is_mock_port() instead of the explicit mock cxl_acpi device
check.
Acked-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166993043433.1882361.17651413716599606118.stgit@dwillia2-xfh.jf.intel.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The three objects 'struct cxl_nvdimm_bridge', 'struct cxl_nvdimm', and
'struct cxl_pmem_region' manage CXL persistent memory resources. The
bridge represents base platform resources, the nvdimm represents one or
more endpoints, and the region is a collection of nvdimms that
contribute to an assembled address range.
Their relationship is such that a region is torn down if any component
endpoints are removed. All regions and endpoints are torn down if the
foundational bridge device goes down.
A workqueue was deployed to manage these interdependencies, but it is
difficult to reason about, and fragile. A recent attempt to take the CXL
root device lock in the cxl_mem driver was reported by lockdep as
colliding with the flush_work() in the cxl_pmem flows.
Instead of the workqueue, arrange for all pmem/nvdimm devices to be torn
down immediately and hierarchically. A similar change is made to both
the 'cxl_nvdimm' and 'cxl_pmem_region' objects. For bisect-ability both
changes are made in the same patch which unfortunately makes the patch
bigger than desired.
Arrange for cxl_memdev and cxl_region to register a cxl_nvdimm and
cxl_pmem_region as a devres release action of the bridge device.
Additionally, include a devres release action of the cxl_memdev or
cxl_region device that triggers the bridge's release action if an endpoint
exits before the bridge. I.e. this allows either unplugging the bridge,
or unplugging and endpoint to result in the same cleanup actions.
To keep the patch smaller the cleanup of the now defunct workqueue
infrastructure is saved for a follow-on patch.
Tested-by: Robert Richter <rrichter@amd.com>
Link: https://lore.kernel.org/r/166993041773.1882361.16444301376147207609.stgit@dwillia2-xfh.jf.intel.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The latest version of grep claims the egrep is now obsolete so the build
now contains warnings that look like:
egrep: warning: egrep is obsolescent; using grep -E
fix this using "grep -E" instead.
sed -i "s/egrep/grep -E/g" `grep egrep -rwl tools/testing/selftests/net`
Here are the steps to install the latest grep:
wget http://ftp.gnu.org/gnu/grep/grep-3.8.tar.gz
tar xf grep-3.8.tar.gz
cd grep-3.8 && ./configure && make
sudo make install
export PATH=/usr/local/bin:$PATH
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/r/1669864248-829-1-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When testing in kci_test_ipsec_offload, srcip is configured as $dstip,
it should add xfrm policy rule in instead of out.
The test result of this patch is as follows:
PASS: ipsec_offload
Fixes: 2766a11161 ("selftests: rtnetlink: add ipsec offload API test")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Acked-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20221201082246.14131-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit d2825fa936 ("crypto: sm3,sm4 - move into crypto directory") moves
SM3 and SM4 algorithm implementations from stand-alone library to crypto
API. The corresponding configuration options for the API version (generic)
are CONFIG_CRYPTO_SM3_GENERIC and CONFIG_CRYPTO_SM4_GENERIC, respectively.
Replace option selected in selftests configuration from the library version
to the API version.
Fixes: d2825fa936 ("crypto: sm3,sm4 - move into crypto directory")
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: stable@vger.kernel.org # v5.19+
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Link: https://lore.kernel.org/r/20221201131852.38501-1-tianjia.zhang@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current libbpf Makefile does not contain the help command, which
is inconvenient to use. Similar to the Makefile help command of the
perf, a help command is provided to list the commands supported by
libbpf make and the functions of the commands.
Signed-off-by: Xin Liu <liuxin350@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221202081738.128513-1-liuxin350@huawei.com
The bpf_legacy.h header uses llvm specific load functions, add
GCC compatible variants as well to fix tests using these functions
under GCC.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221201190939.3230513-1-james.hilliard1@gmail.com
address post-6.0 issues, which is hopefully a sign that things are
converging.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY4pQpQAKCRDdBJ7gKXxA
jquxAP9Lqif7CGDgdq8uWY2hHS/Ujc3k7Ohgyzs37olnCuU8KwEA6/J7SpjsBgtY
OfzvnwxpCTh8Kfzu/oNckIHo/EEiIA8=
=o6qT
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2022-12-02' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc hotfixes from Andrew Morton:
"15 hotfixes, 11 marked cc:stable.
Only three or four of the latter address post-6.0 issues, which is
hopefully a sign that things are converging"
* tag 'mm-hotfixes-stable-2022-12-02' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
revert "kbuild: fix -Wimplicit-function-declaration in license_is_gpl_compatible"
Kconfig.debug: provide a little extra FRAME_WARN leeway when KASAN is enabled
drm/amdgpu: temporarily disable broken Clang builds due to blown stack-frame
mm/khugepaged: invoke MMU notifiers in shmem/file collapse paths
mm/khugepaged: fix GUP-fast interaction by sending IPI
mm/khugepaged: take the right locks for page table retraction
mm: migrate: fix THP's mapcount on isolation
mm: introduce arch_has_hw_nonleaf_pmd_young()
mm: add dummy pmd_young() for architectures not having it
mm/damon/sysfs: fix wrong empty schemes assumption under online tuning in damon_sysfs_set_schemes()
tools/vm/slabinfo-gnuplot: use "grep -E" instead of "egrep"
nilfs2: fix NULL pointer dereference in nilfs_palloc_commit_free_entry()
hugetlb: don't delete vma_lock in hugetlb MADV_DONTNEED processing
madvise: use zap_page_range_single for madvise dontneed
mm: replace VM_WARN_ON to pr_warn if the node is offline with __GFP_THISNODE
In the "mode_filter_without_nnp" test in seccomp_bpf, there is currently
a TODO which asks to check the capability CAP_SYS_ADMIN instead of euid.
This patch adds support to check if the calling process has the flag
CAP_SYS_ADMIN, and also if this flag has CAP_EFFECTIVE set.
Signed-off-by: Gautam Menghani <gautammenghani201@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220731092529.28760-1-gautammenghani201@gmail.com
There is a spelling mistake in some help text. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Message-Id: <20221201091354.1613652-1-colin.i.king@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert {clear,set}_bit() to atomics as KVM's ucall implementation relies
on clear_bit() being atomic, they are defined in atomic.h, and the same
helpers in the kernel proper are atomic.
KVM's ucall infrastructure is the only user of clear_bit() in tools/, and
there are no true set_bit() users. tools/testing/nvdimm/ does make heavy
use of set_bit(), but that code builds into a kernel module of sorts, i.e.
pulls in all of the kernel's header and so is already getting the kernel's
atomic set_bit().
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221119013450.2643007-10-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop the "atomic_" prefix from tools' atomic_test_and_set_bit() to
match the kernel nomenclature where test_and_set_bit() is atomic,
and __test_and_set_bit() provides the non-atomic variant.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221119013450.2643007-9-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop tools' non-atomic test_and_set_bit() and test_and_clear_bit() helpers
now that all users are gone. The names will be claimed in the future for
atomic versions.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221119013450.2643007-8-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the dedicated non-atomic helpers for {clear,set}_bit() and their
test variants, i.e. the double-underscore versions. Depsite being
defined in atomic.h, and despite the kernel versions being atomic in the
kernel, tools' {clear,set}_bit() helpers aren't actually atomic. Move
to the double-underscore versions so that the versions that are expected
to be atomic (for kernel developers) can be made atomic without affecting
users that don't want atomic operations.
Leave the usage in ucall_free() as-is, it's the one place in tools/ that
actually wants/needs atomic behavior.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221119013450.2643007-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the dedicated non-atomic helpers for {clear,set}_bit() and their
test variants, i.e. the double-underscore versions. Depsite being
defined in atomic.h, and despite the kernel versions being atomic in the
kernel, tools' {clear,set}_bit() helpers aren't actually atomic. Move
to the double-underscore versions so that the versions that are expected
to be atomic (for kernel developers) can be made atomic without affecting
users that don't want atomic operations.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Message-Id: <20221119013450.2643007-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Take @bit as an unsigned long instead of a signed int in clear_bit() and
set_bit() so that they match the double-underscore versions, __clear_bit()
and __set_bit(). This will allow converting users that really don't want
atomic operations to the double-underscores without introducing a
functional change, which will in turn allow making {clear,set}_bit()
atomic (as advertised).
Practically speaking, this _should_ have no functional impact. KVM's
selftests usage is either hardcoded (Hyper-V tests) or is artificially
limited (arch_timer test and dirty_log test). In KVM, dirty_log test is
the only mildly interesting case as it's use indirectly restricted to
unsigned 32-bit values, but in theory it could generate a negative value
when cast to a signed int. But in that case, taking an "unsigned long"
is actually a bug fix.
Perf's usage is more difficult to audit, but any code that is affected
by the switch is likely already broken. perf_header__{set,clear}_feat()
and perf_file_header__read() effectively use only hardcoded enums with
small, positive values, atom_new() passes an unsigned long, but its value
is capped at 128 via NR_ATOM_PER_PAGE, etc...
The only real potential for breakage is in the perf flows that take a
"cpu", but it's unlikely perf is subtly relying on a negative index into
bitmaps, e.g. "cpu" can be "-1", but only as "not valid" placeholder.
Note, tools/testing/nvdimm/ makes heavy use of set_bit(), but that code
builds into a kernel module of sorts, i.e. pulls in all of the kernel's
header and so is getting the kernel's atomic set_bit(). The NVDIMM test
usage of atomics is likely unnecessary, e.g. ndtest_dimm_register() sets
bits in a local variable, but that's neither here nor there as far as
this change is concerned.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221119013450.2643007-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a new ucall hook, GUEST_UCALL_NONE(), to allow tests to make ucalls
without allocating a ucall struct, and use it to enable single-step
in ARM's debug-exceptions test. Like the disable single-step path, the
enabling path also needs to ensure that no exclusive access sequences are
attempted after enabling single-step, as the exclusive monitor is cleared
on ERET from the debug exception taken to EL2.
The test currently "works" because clear_bit() isn't actually an atomic
operation... yet.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221119013450.2643007-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- One-off fixes for various emulation flows (SGX, VMXON, NRIPS=0).
- Reinstate IBPB on emulated VM-Exit that was incorrectly dropped a few
years back when eliminating unnecessary barriers when switching between
vmcs01 and vmcs02.
- Clean up the MSR filter docs.
- Clean up vmread_error_trampoline() to make it more obvious that params
must be passed on the stack, even for x86-64.
- Let userspace set all supported bits in MSR_IA32_FEAT_CTL irrespective
of the current guest CPUID.
- Fudge around a race with TSC refinement that results in KVM incorrectly
thinking a guest needs TSC scaling when running on a CPU with a
constant TSC, but no hardware-enumerated TSC frequency.
-----BEGIN PGP SIGNATURE-----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=i6OA
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-fixes-6.2-1' of https://github.com/kvm-x86/linux into HEAD
Misc KVM x86 fixes and cleanups for 6.2:
- One-off fixes for various emulation flows (SGX, VMXON, NRIPS=0).
- Reinstate IBPB on emulated VM-Exit that was incorrectly dropped a few
years back when eliminating unnecessary barriers when switching between
vmcs01 and vmcs02.
- Clean up the MSR filter docs.
- Clean up vmread_error_trampoline() to make it more obvious that params
must be passed on the stack, even for x86-64.
- Let userspace set all supported bits in MSR_IA32_FEAT_CTL irrespective
of the current guest CPUID.
- Fudge around a race with TSC refinement that results in KVM incorrectly
thinking a guest needs TSC scaling when running on a CPU with a
constant TSC, but no hardware-enumerated TSC frequency.
- Fix an inverted check in the access tracking perf test, and restore
support for asserting that there aren't too many idle pages when
running on bare metal.
- Fix an ordering issue in the AMX test introduced by recent conversions
to use kvm_cpu_has(), and harden the code to guard against similar bugs
in the future. Anything that tiggers caching of KVM's supported CPUID,
kvm_cpu_has() in this case, effectively hides opt-in XSAVE features if
the caching occurs before the test opts in via prctl().
- Fix build errors that occur in certain setups (unsure exactly what is
unique about the problematic setup) due to glibc overriding
static_assert() to a variant that requires a custom message.
-----BEGIN PGP SIGNATURE-----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=Gkt4
-----END PGP SIGNATURE-----
Merge tag 'kvm-selftests-6.2-2' of https://github.com/kvm-x86/linux into HEAD
KVM selftests fixes for 6.2
- Fix an inverted check in the access tracking perf test, and restore
support for asserting that there aren't too many idle pages when
running on bare metal.
- Fix an ordering issue in the AMX test introduced by recent conversions
to use kvm_cpu_has(), and harden the code to guard against similar bugs
in the future. Anything that tiggers caching of KVM's supported CPUID,
kvm_cpu_has() in this case, effectively hides opt-in XSAVE features if
the caching occurs before the test opts in via prctl().
- Fix build errors that occur in certain setups (unsure exactly what is
unique about the problematic setup) due to glibc overriding
static_assert() to a variant that requires a custom message.
There are still references to the removed kvm_memory_region data structure
but the doc and comments should mention struct kvm_userspace_memory_region
instead, since that is what's used by the ioctl that replaced the old one
and this data structure support the same set of flags.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Message-Id: <20221202105011.185147-4-javierm@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The documentation says that the ioctl has been deprecated, but it has been
actually removed and the remaining references are just left overs.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Message-Id: <20221202105011.185147-3-javierm@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The documentation says that the ioctl has been deprecated, but it has been
actually removed and the remaining references are just left overs.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Message-Id: <20221202105011.185147-2-javierm@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On 32bit the trigger-synthetic-eprobe.tc selftest fails with the error:
hist:syscalls:sys_exit_openat: error: Param type doesn't match synthetic event field type
Command: hist:keys=common_pid:filename=$__arg__1,ret=ret:onmatch(syscalls.sys_enter_openat).trace(synth_open,$filename,$ret)
^
This is because the synth_open synthetic event is created with:
echo "$SYNTH u64 filename; s64 ret;" > synthetic_events
Which works fine on 64 bit, as filename is a pointer and the return is
also a long. But for 32 bit architectures, it doesn't work.
Use "unsigned long" and "long" instead so that it works for both 64 bit
and 32 bit architectures.
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Resolve conflicts in drivers/vfio/vfio_main.c by using the iommfd version.
The rc fix was done a different way when iommufd patches reworked this
code.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
- malloc() does not zero the buffer,
- fread() does not null-terminate it's output,
- `cat /proc/sys/kernel/core_pattern | hexdump -C` shows the file is
not inherently null-terminated
So using string operations on the buffer is risky. Explicitly add a null
character to the end to make it safer.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221128041948.58339-3-bgray@linux.ibm.com
No need to write inline asm for mtspr/mfspr, we have macros for this
in reg.h
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221128041948.58339-2-bgray@linux.ibm.com
The latest version of grep claims the egrep is now obsolete so the build
now contains warnings that look like:
egrep: warning: egrep is obsolescent; using grep -E
fix this using "grep -E" instead.
sed -i "s/egrep/grep -E/g" `grep egrep -rwl tools/testing/selftests/powerpc`
Here are the steps to install the latest grep:
wget http://ftp.gnu.org/gnu/grep/grep-3.8.tar.gz
tar xf grep-3.8.tar.gz
cd grep-3.8 && ./configure && make
sudo make install
export PATH=/usr/local/bin:$PATH
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1669862997-31335-1-git-send-email-yangtiezhu@loongson.cn
This test adds a basic HSRv0 network with 3 nodes. In its current shape
it sends and forwards packets, announcements and so merges nodes based
on MAC A/B information.
It is able to detect duplicate packets and packetloss should any occur.
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds test coverage for listening sockets created by the
in-kernel path manager in mptcp_join.sh.
It adds the listener event checking in the existing "remove single
address with port" test. The output looks like this:
003 remove single address with port syn[ ok ] - synack[ ok ] - ack[ ok ]
add[ ok ] - echo [ ok ] - pt [ ok ]
syn[ ok ] - synack[ ok ] - ack[ ok ]
syn[ ok ] - ack [ ok ]
rm [ ok ] - rmsf [ ok ] invert
CREATE_LISTENER 10.0.2.1:10100[ ok ]
CLOSE_LISTENER 10.0.2.1:10100 [ ok ]
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch moves evts_ns1 and evts_ns2 out of do_transfer() as two global
variables in mptcp_join.sh. Init them in init() and remove them in
cleanup().
Add a new helper reset_with_events() to save the outputs of 'pm_nl_ctl
events' command in them. And a new helper kill_events_pids() to kill
pids of 'pm_nl_ctl events' command. Use these helpers in userspace pm
tests.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds test coverage for listening sockets created by userspace
processes.
It adds a new test named test_listener() and a new verifying helper
verify_listener_events(). The new output looks like this:
CREATE_SUBFLOW 10.0.2.2 (ns2) => 10.0.2.1 (ns1) [OK]
DESTROY_SUBFLOW 10.0.2.2 (ns2) => 10.0.2.1 (ns1) [OK]
MP_PRIO TX [OK]
MP_PRIO RX [OK]
CREATE_LISTENER 10.0.2.2:37106 [OK]
CLOSE_LISTENER 10.0.2.2:37106 [OK]
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch makes server_evts and client_evts global in userspace_pm.sh,
then these two variables could be used in test_announce(), test_remove()
and test_subflows(). The local variable 'evts' in these three functions
then could be dropped.
Also move local variable 'file' as a global one.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some userspace pm tests failed since pm listener events have been added.
Now MPTCP_EVENT_LISTENER_CREATED event becomes the first item in the
events list like this:
type:15,family:2,sport:10006,saddr4:0.0.0.0
type:1,token:3701282876,server_side:1,family:2,saddr4:10.0.1.1,...
And no token value in this MPTCP_EVENT_LISTENER_CREATED event.
This patch fixes this by specifying the type 1 item to search for token
values.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Just to avoid classical Bash pitfall where variables are accidentally
overridden by other functions because the proper scope has not been
defined.
That's also what is done in other MPTCP selftests scripts where all non
local variables are defined at the beginning of the script and the
others are defined with the "local" keyword.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It is clearer to declare these global variables at the beginning of the
file as it is done in other MPTCP selftests rather than in functions in
the middle of the script.
So for uniformity reason, we can do the same here in mptcp_sockopt.sh.
Suggested-by: Geliang Tang <geliang.tang@suse.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The definition of 'rndh' was probably copied from one script to another
but some times, 'sec' was not defined, not used and/or not spelled
properly.
Here all the 'rndh' are now defined the same way.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some variables were set but never used.
This was not causing any issues except adding some confusion and having
shellcheck complaining about them.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A new "sandbox" net namespace is available where no other netfilter
rules have been added.
Use this new netns instead of re-using "ns1" and clean it.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Modify list_push_pop_multiple to alloc and insert nodes 2-at-a-time.
Without the previous patch's fix, this block of code:
bpf_spin_lock(lock);
bpf_list_push_front(head, &f[i]->node);
bpf_list_push_front(head, &f[i + 1]->node);
bpf_spin_unlock(lock);
would fail check_reference_leak check as release_on_unlock logic would miss
a ref that should've been released.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
cc: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221201183406.1203621-2-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Define and use kvm_static_assert() in the common KVM selftests headers to
provide deterministic behavior, and to allow creating static asserts
without dummy messages.
The kernel's static_assert() makes the message param optional, and on the
surface, tools/include/linux/build_bug.h appears to follow suit. However,
glibc may override static_assert() and redefine it as a direct alias of
_Static_assert(), which makes the message parameter mandatory. This leads
to non-deterministic behavior as KVM selftests code that utilizes
static_assert() without a custom message may or not compile depending on
the order of includes. E.g. recently added asserts in
x86_64/processor.h fail on some systems with errors like
In file included from lib/memstress.c:11:0:
include/x86_64/processor.h: In function ‘this_cpu_has_p’:
include/x86_64/processor.h:193:34: error: expected ‘,’ before ‘)’ token
static_assert(low_bit < high_bit); \
^
due to _Static_assert() expecting a comma before a message. The "message
optional" version of static_assert() uses macro magic to strip away the
comma when presented with empty an __VA_ARGS__
#ifndef static_assert
#define static_assert(expr, ...) __static_assert(expr, ##__VA_ARGS__, #expr)
#define __static_assert(expr, msg, ...) _Static_assert(expr, msg)
#endif // static_assert
and effectively generates "_Static_assert(expr, #expr)".
The incompatible version of static_assert() gets defined by this snippet
in /usr/include/assert.h:
#if defined __USE_ISOC11 && !defined __cplusplus
# undef static_assert
# define static_assert _Static_assert
#endif
which yields "_Static_assert(expr)" and thus fails as above.
KVM selftests don't actually care about using C11, but __USE_ISOC11 gets
defined because of _GNU_SOURCE, which many tests do #define. _GNU_SOURCE
triggers a massive pile of defines in /usr/include/features.h, including
_ISOC11_SOURCE:
/* If _GNU_SOURCE was defined by the user, turn on all the other features. */
#ifdef _GNU_SOURCE
# undef _ISOC95_SOURCE
# define _ISOC95_SOURCE 1
# undef _ISOC99_SOURCE
# define _ISOC99_SOURCE 1
# undef _ISOC11_SOURCE
# define _ISOC11_SOURCE 1
# undef _POSIX_SOURCE
# define _POSIX_SOURCE 1
# undef _POSIX_C_SOURCE
# define _POSIX_C_SOURCE 200809L
# undef _XOPEN_SOURCE
# define _XOPEN_SOURCE 700
# undef _XOPEN_SOURCE_EXTENDED
# define _XOPEN_SOURCE_EXTENDED 1
# undef _LARGEFILE64_SOURCE
# define _LARGEFILE64_SOURCE 1
# undef _DEFAULT_SOURCE
# define _DEFAULT_SOURCE 1
# undef _ATFILE_SOURCE
# define _ATFILE_SOURCE 1
#endif
which further down in /usr/include/features.h leads to:
/* This is to enable the ISO C11 extension. */
#if (defined _ISOC11_SOURCE \
|| (defined __STDC_VERSION__ && __STDC_VERSION__ >= 201112L))
# define __USE_ISOC11 1
#endif
To make matters worse, /usr/include/assert.h doesn't guard against
multiple inclusion by turning itself into a nop, but instead #undefs a
few macros and continues on. As a result, it's all but impossible to
ensure the "message optional" version of static_assert() will actually be
used, e.g. explicitly including assert.h and #undef'ing static_assert()
doesn't work as a later inclusion of assert.h will again redefine its
version.
#ifdef _ASSERT_H
# undef _ASSERT_H
# undef assert
# undef __ASSERT_VOID_CAST
# ifdef __USE_GNU
# undef assert_perror
# endif
#endif /* assert.h */
#define _ASSERT_H 1
#include <features.h>
Fixes: fcba483e82 ("KVM: selftests: Sanity check input to ioctls() at build time")
Fixes: ee37955366 ("KVM: selftests: Refactor X86_FEATURE_* framework to prep for X86_PROPERTY_*")
Fixes: 53a7dc0f21 ("KVM: selftests: Add X86_PROPERTY_* framework to retrieve CPUID values")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221122013309.1872347-1-seanjc@google.com
Move the AMX test's kvm_cpu_has() checks before creating the VM+vCPU,
there are no dependencies between the two operations. Opportunistically
add a comment to call out that enabling off-by-default XSAVE-managed
features must be done before KVM_GET_SUPPORTED_CPUID is cached.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221128225735.3291648-5-seanjc@google.com
Disallow using kvm_get_supported_cpuid() and thus caching KVM's supported
CPUID info before enabling XSAVE-managed features that are off-by-default
and must be enabled by ARCH_REQ_XCOMP_GUEST_PERM. Caching the supported
CPUID before all XSAVE features are enabled can result in false negatives
due to testing features that were cached before they were enabled.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221128225735.3291648-4-seanjc@google.com
Move __vm_xsave_require_permission() below the CPUID helpers so that a
future change can reference the cached result of KVM_GET_SUPPORTED_CPUID
while keeping the definition of the variable close to its intended user,
kvm_get_supported_cpuid().
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221128225735.3291648-3-seanjc@google.com
Move the kvm_cpu_has() check on X86_FEATURE_XFD out of the helper to
enable off-by-default XSAVE-managed features and into the one test that
currenty requires XFD (XFeature Disable) support. kvm_cpu_has() uses
kvm_get_supported_cpuid() and thus caches KVM_GET_SUPPORTED_CPUID, and so
using kvm_cpu_has() before ARCH_REQ_XCOMP_GUEST_PERM effectively results
in the test caching stale values, e.g. subsequent checks on AMX_TILE will
get false negatives.
Although off-by-default features are nonsensical without XFD, checking
for XFD virtualization prior to enabling such features isn't strictly
required.
Signed-off-by: Lei Wang <lei4.wang@intel.com>
Fixes: 7fbb653e01 ("KVM: selftests: Check KVM's supported CPUID, not host CPUID, for XFD")
Link: https://lore.kernel.org/r/20221125023839.315207-1-lei4.wang@intel.com
[sean: add Fixes, reword changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221128225735.3291648-2-seanjc@google.com
Restore the assert (on x86-64) that <10% of pages are still idle when NOT
running as a nested VM in the access tracking test. The original assert
was converted to a "warning" to avoid false failures when running the
test in a VM, but the non-nested case does not suffer from the same
"infinite TLB size" issue.
Using the HYPERVISOR flag isn't infallible as VMMs aren't strictly
required to enumerate the "feature" in CPUID, but practically speaking
anyone that is running KVM selftests in VMs is going to be using a VMM
and hypervisor that sets the HYPERVISOR flag.
Cc: David Matlack <dmatlack@google.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221129175300.4052283-3-seanjc@google.com
Warn if the number of idle pages is greater than or equal to 10% of the
total number of pages, not if the percentage of idle pages is less than
10%. The original code asserted that less than 10% of pages were still
idle, but the check got inverted when the assert was converted to a
warning.
Opportunistically clean up the warning; selftests are 64-bit only, there
is no need to use "%PRIu64" instead of "%lu".
Fixes: 6336a810db ("KVM: selftests: replace assertion with warning in access_tracking_perf_test")
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221129175300.4052283-2-seanjc@google.com
nfit_test overrode the security_show() sysfs attribute function in nvdimm
dimm_devs in order to allow testing of security unlock. With the
introduction of CXL security commands, the trick to override
security_show() becomes significantly more complicated. By introdcing a
security flag CONFIG_NVDIMM_SECURITY_TEST, libnvdimm can just toggle the
check via a compile option. In addition the original override can can be
removed from tools/testing/nvdimm/.
The flag will also be used to bypass cpu_cache_invalidate_memregion() when
set in a different commit. This allows testing on QEMU with nfit_test or
cxl_test since cpu_cache_has_invalidate_memregion() checks whether
X86_FEATURE_HYPERVISOR cpu feature flag is set on x86.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166983618758.2734609.18031639517065867138.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The mock cxl mem devs needs a way to go into "locked" status to simulate
when the platform is rebooted. Add a sysfs mechanism so the device security
state is set to "locked" and the frozen state bits are cleared.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166983617602.2734609.7042497620931694717.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Add support to emulate a CXL mem device support the "Disable Passphrase"
operation. The operation supports disabling of either a user or a master
passphrase. The emulation will provide support for both user and master
passphrase.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166983612447.2734609.2767804273351656413.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Add support to emulate a CXL mem device supporting the "Set Passphrase"
operation. The operation supports setting of either a user or a master
passphrase.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166983611314.2734609.12996309794483934484.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Add the emulation support for handling "Get Security State" opcode for a
CXL memory device for the cxl_test. The function will copy back device
security state bitmask to the output payload.
The security state data is added as platform_data for the mock mem device.
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166983610177.2734609.4953959949148428755.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Now that we can skip unsupported configurations add some more test cases
using that, cover 8kHz, 44.1kHz and 96kHz plus 8kHz mono and 48kHz 6
channel.
44.1kHz is a different clock base to the existing 48kHz tests and may
therefore show problems with the clock configuration if only 8kHz based
rates are really available (or help diagnose if bad clocking is due to
only 44.1kHz based rates being supported). 8kHz mono and 48Hz 6 channel
are real world formats and should show if clocking does not account for
channel count properly.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221201170745.1111236-7-broonie@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Rather than just numbering the tests try to provide semi descriptive names
for what the tests are trying to cover. This also has the advantage of
meaning we can add more tests without having to keep the list of tests
ordered by existing number which should make it easier to understand what
we're testing and why.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221201170745.1111236-6-broonie@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The values in the one example configuration file we currently have are the
default values for the two tests we have so there's no need to actually set
them. Comment them out as examples, with a rename for the tests so that we
can update the tests in the code more easily.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221201170745.1111236-5-broonie@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If constraint selection gives us a number of channels other than the one
that we asked for that isn't a failure, that is the device implementing
constraints and advertising that it can't support whatever we asked
for. Report such cases as a test skip rather than failure so we don't have
false positives.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221201170745.1111236-4-broonie@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If constraint selection gives us a sample rate other than the one that we
asked for that isn't a failure, that is the device implementing sample
rate constraints and advertising that it can't support whatever we asked
for. Report such cases as a test skip rather than failure so we don't have
false positives.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221201170745.1111236-3-broonie@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In order to help make the list of tests a bit easier to maintain refactor
things so we pass the tests around as a struct with the parameters in,
enabling us to add new tests by adding to a table with comments saying
what each of the number are. We could also use named initializers if we get
more parameters.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221201170745.1111236-2-broonie@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When everything is starting up we are likely to have a lot of child
processes producing output at once. This means that we can reduce
overhead a bit by allowing epoll_wait() to return more than one
descriptor at once, it cuts down on the number of system calls we need
to do which on virtual platforms where the syscall overhead is a bit
more noticable and we're likely to have a lot more children active can
make a small but noticable difference.
On physical platforms the relatively small number of processes being run
and vastly improved speeds push the effects of this change into the
noise.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221129215926.442895-4-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Now we hold execution of the stress test programs until all children are
started there is no need to drain output while that is happening.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221129215926.442895-3-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
At present fp-stress has a bit of a thundering herd problem since the
children it spawns start running immediately, meaning that they can start
starving the parent process of CPU before it has even started all the
children. This is much more severe on virtual platforms since they tend to
support far more SVE and SME vector lengths, be slower in general and for
some have issues with performance when simulating multiple CPUs.
We can mitigate this problem by having all the child processes block before
starting the test program, meaning that we at least have all the child
processes started before we start heavily using CPU. We still have the same
load issues while waiting for the actual stress test programs to start up
and produce output but they're at least all ready to go before that kicks
in, resulting in substantial reductions in overall runtime on some of the
severely affected systems. One test was showing about 20% improvement.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221129215926.442895-2-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
The test prog dumps a single AF_UNIX socket's UID with and without
unshare(CLONE_NEWUSER) and checks if it matches the result of getuid().
Without the preceding patch, the test prog is killed by a NULL deref
in sk_diag_dump_uid().
# ./diag_uid
TAP version 13
1..2
# Starting 2 tests from 3 test cases.
# RUN diag_uid.uid.1 ...
BUG: kernel NULL pointer dereference, address: 0000000000000270
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 105212067 P4D 105212067 PUD 1051fe067 PMD 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.amzn2022.0.1 04/01/2014
RIP: 0010:sk_diag_fill (./include/net/sock.h:920 net/unix/diag.c:119 net/unix/diag.c:170)
...
# 1: Test terminated unexpectedly by signal 9
# FAIL diag_uid.uid.1
not ok 1 diag_uid.uid.1
# RUN diag_uid.uid_unshare.1 ...
# 1: Test terminated by timeout
# FAIL diag_uid.uid_unshare.1
not ok 2 diag_uid.uid_unshare.1
# FAILED: 0 / 2 tests passed.
# Totals: pass:0 fail:2 xfail:0 xpass:0 skip:0 error:0
With the patch, the test succeeds.
# ./diag_uid
TAP version 13
1..2
# Starting 2 tests from 3 test cases.
# RUN diag_uid.uid.1 ...
# OK diag_uid.uid.1
ok 1 diag_uid.uid.1
# RUN diag_uid.uid_unshare.1 ...
# OK diag_uid.uid_unshare.1
ok 2 diag_uid.uid_unshare.1
# PASSED: 2 / 2 tests passed.
# Totals: pass:2 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add nvdimm_security_ops support for CXL memory device with the introduction
of the ->get_flags() callback function. This is part of the "Persistent
Memory Data-at-rest Security" command set for CXL memory device support.
The ->get_flags() function provides the security state of the persistent
memory device defined by the CXL 3.0 spec section 8.2.9.8.6.1.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166983609611.2734609.13231854299523325319.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Verify the KVM allows userspace to set all supported bits in the
IA32_FEATURE_CONTROL MSR irrespective of the current guest CPUID, and
that all unsupported bits are rejected.
Throw the testcase into vmx_msrs_test even though it's not technically a
VMX MSR; it's close enough, and the most frequently feature controlled by
the MSR is VMX.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220607232353.3375324-4-seanjc@google.com
Cover the essential functionality of the iommufd with a directed test from
userspace. This aims to achieve reasonable functional coverage using the
in-kernel self test framework.
A second test does a failure injection sweep of the success paths to study
error unwind behaviors.
This allows achieving high coverage of the corner cases in pages.c.
The selftest requires CONFIG_IOMMUFD_TEST to be enabled, and several huge
pages which may require:
echo 4 > /proc/sys/vm/nr_hugepages
Link: https://lore.kernel.org/r/19-v6-a196d26f289e+11787-iommufd_jgg@nvidia.com
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com> # s390
Tested-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Eric Auger <eric.auger@redhat.com> # aarch64
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This test was overlooked with a hard-coded mntpoint path in test when
we're removing the hugetlb mntpoint in commit 0796c7b8be. Fix it up so
the test can keep running.
Link: https://lkml.kernel.org/r/Y3aojfUC2nSwbCzB@x1n
Fixes: 0796c7b8be ("selftests/vm: drop mnt point for hugetlb in run_vmtests.sh")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reported-by: Joel Savitz <jsavitz@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Let's test whether R/O long-term pinning is reliable for non-anonymous
memory: when R/O long-term pinning a page, the expectation is that we
break COW early before pinning, such that actual write access via the
page tables won't break COW later and end up replacing the R/O-pinned
page in the page table.
Consequently, R/O long-term pinning in private mappings would only target
exclusive anonymous pages.
For now, all tests fail:
# [RUN] R/O longterm GUP pin ... with shared zeropage
not ok 151 Longterm R/O pin is reliable
# [RUN] R/O longterm GUP pin ... with memfd
not ok 152 Longterm R/O pin is reliable
# [RUN] R/O longterm GUP pin ... with tmpfile
not ok 153 Longterm R/O pin is reliable
# [RUN] R/O longterm GUP pin ... with huge zeropage
not ok 154 Longterm R/O pin is reliable
# [RUN] R/O longterm GUP pin ... with memfd hugetlb (2048 kB)
not ok 155 Longterm R/O pin is reliable
# [RUN] R/O longterm GUP pin ... with memfd hugetlb (1048576 kB)
not ok 156 Longterm R/O pin is reliable
# [RUN] R/O longterm GUP-fast pin ... with shared zeropage
not ok 157 Longterm R/O pin is reliable
# [RUN] R/O longterm GUP-fast pin ... with memfd
not ok 158 Longterm R/O pin is reliable
# [RUN] R/O longterm GUP-fast pin ... with tmpfile
not ok 159 Longterm R/O pin is reliable
# [RUN] R/O longterm GUP-fast pin ... with huge zeropage
not ok 160 Longterm R/O pin is reliable
# [RUN] R/O longterm GUP-fast pin ... with memfd hugetlb (2048 kB)
not ok 161 Longterm R/O pin is reliable
# [RUN] R/O longterm GUP-fast pin ... with memfd hugetlb (1048576 kB)
not ok 162 Longterm R/O pin is reliable
Link: https://lkml.kernel.org/r/20221116102659.70287-4-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Let's add basic tests for COW with non-anonymous pages in private
mappings: write access should properly trigger COW and result in the
private changes not being visible through other page mappings.
Especially, add tests for:
* Zeropage
* Huge zeropage
* Ordinary pagecache pages via memfd and tmpfile()
* Hugetlb pages via memfd
Fortunately, all tests pass.
Link: https://lkml.kernel.org/r/20221116102659.70287-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/gup: remove FOLL_FORCE usage from drivers (reliable R/O
long-term pinning)".
For now, we did not support reliable R/O long-term pinning in COW
mappings. That means, if we would trigger R/O long-term pinning in
MAP_PRIVATE mapping, we could end up pinning the (R/O-mapped) shared
zeropage or a pagecache page.
The next write access would trigger a write fault and replace the pinned
page by an exclusive anonymous page in the process page table; whatever
the process would write to that private page copy would not be visible by
the owner of the previous page pin: for example, RDMA could read stale
data. The end result is essentially an unexpected and hard-to-debug
memory corruption.
Some drivers tried working around that limitation by using
"FOLL_FORCE|FOLL_WRITE|FOLL_LONGTERM" for R/O long-term pinning for now.
FOLL_WRITE would trigger a write fault, if required, and break COW before
pinning the page. FOLL_FORCE is required because the VMA might lack write
permissions, and drivers wanted to make that working as well, just like
one would expect (no write access, but still triggering a write access to
break COW).
However, that is not a practical solution, because
(1) Drivers that don't stick to that undocumented and debatable pattern
would still run into that issue. For example, VFIO only uses
FOLL_LONGTERM for R/O long-term pinning.
(2) Using FOLL_WRITE just to work around a COW mapping + page pinning
limitation is unintuitive. FOLL_WRITE would, for example, mark the
page softdirty or trigger uffd-wp, even though, there actually isn't
going to be any write access.
(3) The purpose of FOLL_FORCE is debug access, not access without lack of
VMA permissions by arbitrarty drivers.
So instead, make R/O long-term pinning work as expected, by breaking COW
in a COW mapping early, such that we can remove any FOLL_FORCE usage from
drivers and make FOLL_FORCE ptrace-specific (renaming it to FOLL_PTRACE).
More details in patch #8.
This patch (of 19):
Originally, the plan was to have a separate tests for testing COW of
non-anonymous (e.g., shared zeropage) pages.
Turns out, that we'd need a lot of similar functionality and that there
isn't a really good reason to separate it. So let's prepare for non-anon
tests by renaming to "cow".
Link: https://lkml.kernel.org/r/20221116102659.70287-1-david@redhat.com
Link: https://lkml.kernel.org/r/20221116102659.70287-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andy Walls <awalls@md.metrocast.net>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bernard Metzler <bmt@zurich.ibm.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Benvenuti <benve@cisco.com>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: James Morris <jmorris@namei.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kentaro Takeda <takedakn@nttdata.co.jp>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Leon Romanovsky <leonro@nvidia.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nelson Escobar <neescoba@cisco.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oded Gabbay <ogabbay@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Russell King <linux+etnaviv@armlinux.org.uk>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomasz Figa <tfiga@chromium.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When testing overflow and overread, there is no need to keep unnecessary
compilation warnings, we should simply ignore them.
The motivation for this patch is to eliminate the compilation warning,
maybe one day we will compile the kernel with "-Werror -Wall", at which
point this compilation warning will turn into a compilation error, we
should fix this error in advance.
How to reproduce the problem (with gcc-11.3.1):
$ make -C tools/testing/selftests/
...
warning: `write' reading 4294967295 bytes from a region of size 1
[-Wstringop-overread]
warning: `read' writing 4294967295 bytes into a region of size 25
overflows the destination [-Wstringop-overflow=]
"-Wno-stringop-overread" is supported at least in gcc-11.1.0.
Link: https://gcc.gnu.org/git/?p=gcc.git;a=commit;h=d14c547abd484d3540b692bb8048c4a6efe92c8b
Link: https://lkml.kernel.org/r/tencent_51C4ACA8CB3895C2D7F35178440283602107@qq.com
Signed-off-by: Rong Tao <rongtao@cestc.cn>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Let's extend the test to cover the possible mprotect() optimization when
removing write-protection. mprotect() must not allow write-access to a
COW-shared page by accident.
Link: https://lkml.kernel.org/r/20221108174652.198904-8-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit 8ebe0a5eaa ("mm,madvise,hugetlb: fix unexpected data loss with
MADV_DONTNEED on hugetlbfs") changed how the passed length was interpreted
for hugetlb mappings. It was changed from align up to align down. The
hugetlb-madvise test explicitly tests this behavior. Change test to
expect new behavior.
Link: https://lkml.kernel.org/r/20221104011632.357049-1-mike.kravetz@oracle.com
Link: https://lore.kernel.org/oe-lkp/202211040619.2ec447d7-oliver.sang@intel.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add a simple test case for ensuring tried_regions directory existence.
Link: https://lkml.kernel.org/r/20221101220328.95765-7-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This CPU power monitor shows the power consumption
as exposed by the powercap subsystem, cmp with:
Documentation/power/powercap/powercap.rst
cpupower monitor -m RAPL
| RAPL
CPU| pack | core | unco
0|6853926|967832|442381
8|6853926|967832|442381
1|6853926|967832|442381
9|6853926|967832|442381
Unfortunately RAPL domains cannot be directly mapped to the corresponding
CPU socket/package, core it belongs to.
Not sure this is possible at all with the current data exposed from the
kernel.
Still it can be worthful information for developers trying to optimize
power consumption of workloads or their system in general.
Signed-off-by: Thomas Renninger <trenn@suse.de>
CC: Zhang Rui <rui.zhang@intel.com>
CC: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Read out powercap zone information via:
cpupower powercap-info
and show the zone hierarchy to the user:
./cpupower powercap-info
Driver: intel-rapl
Powercap domain hierarchy:
Zone: package-0 (enabled)
Power consumption can be monitored in micro Watts
Zone: core (disabled)
Power consumption can be monitored in micro Watts
Zone: uncore (disabled)
Power consumption can be monitored in micro Watts
Zone: dram (disabled)
Power consumption can be monitored in micro Watts
There is a dummy -a option for powercap-info which can/should be used to
show more detailed info later. Like that other args can be added easily
later as well.
A enable/disable option via powercap-set subcommand is also an enhancement
for later.
Also not all RAPL domains are shown. The func walking through RAPL
subdomains is restricted and hardcoded to: "intel-rapl/intel-rapl:0"
On my system above powercap domains map to:
intel-rapl/intel-rapl:0
-> pack (age-0)
intel-rapl/intel-rapl:0/intel-rapl:0:0
-> core
intel-rapl/intel-rapl:0/intel-rapl:0:1
-> uncore
Missing ones on my system are:
intel-rapl-mmio/intel-rapl-mmio:0
-> pack (age-0)
intel-rapl/intel-rapl:1
-> psys
This could get enhanced in:
struct powercap_zone *powercap_init_zones()
and adopted to walk through all intel-rapl zones, but
also to other powercap drivers like dtpm
(Dynamic Thermal Power Management framework),
cmp with: drivers/powercap/dtpm_*
Signed-off-by: Thomas Renninger <trenn@suse.de>
CC: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The networking programs typically don't require CAP_PERFMON, but through kfuncs
like bpf_cast_to_kern_ctx() they can access memory through PTR_TO_BTF_ID. In
such case enforce CAP_PERFMON.
Also make sure that only GPL programs can access kernel data structures.
All kfuncs require GPL already.
Also remove allow_ptr_to_map_access. It's the same as allow_ptr_leaks and
different name for the same check only causes confusion.
Fixes: fd264ca020 ("bpf: Add a kfunc to type cast from bpf uapi ctx to kernel ctx")
Fixes: 50c6b8a9ae ("selftests/bpf: Add a test for btf_type_tag "percpu"")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20221125220617.26846-1-alexei.starovoitov@gmail.com
BPF CI fails for arm64 and s390x each with the following result:
[...]
All error logs:
serial_test_kprobe_multi_bench_attach:PASS:get_syms 0 nsec
serial_test_kprobe_multi_bench_attach:PASS:kprobe_multi_empty__open_and_load 0 nsec
libbpf: prog 'test_kprobe_empty': failed to attach: Operation not supported
serial_test_kprobe_multi_bench_attach:FAIL:bpf_program__attach_kprobe_multi_opts unexpected error: -95
#92 kprobe_multi_bench_attach:FAIL
[...]
Add the test to the deny list.
Fixes: 5b6c7e5c44 ("selftests/bpf: Add attach bench test")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add simple test cases for DAMON_LRU_SORT's 'enabled' parameter. Those
tests are focusing on the synchronous behavior of DAMON_RECLAIM enabling
and disabling.
Link: https://lkml.kernel.org/r/20221025173650.90624-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add simple test cases for DAMON_RECLAIM's 'enabled' parameter. Those
tests are focusing on the synchronous behavior of DAMON_RECLAIM enabling
and disabling.
Link: https://lkml.kernel.org/r/20221025173650.90624-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The latest version of grep claims the egrep is now obsolete so the build
now contains warnings that look like:
egrep: warning: egrep is obsolescent; using grep -E
fix this up by moving the related file to use "grep -E" instead.
sed -i "s/egrep/grep -E/g" `grep egrep -rwl tools/vm`
Here are the steps to install the latest grep:
wget http://ftp.gnu.org/gnu/grep/grep-3.8.tar.gz
tar xf grep-3.8.tar.gz
cd grep-3.8 && ./configure && make
sudo make install
export PATH=/usr/local/bin:$PATH
Link: https://lkml.kernel.org/r/1668825419-30584-1-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
icmp conntrack will set icmp redirects as RELATED, but icmpv6 will not
do this.
For icmpv6, only icmp errors (code <= 128) are examined for RELATED state.
ICMPV6 Redirects are part of neighbour discovery mechanism, those are
handled by marking a selected subset (e.g. neighbour solicitations) as
UNTRACKED, but not REDIRECT -- they will thus be flagged as INVALID.
Add minimal support for REDIRECTs. No parsing of neighbour options is
added for simplicity, so this will only check that we have the embeeded
original header (ND_OPT_REDIRECT_HDR), and then attempt to do a flow
lookup for this tuple.
Also extend the existing test case to cover redirects.
Fixes: 9fb9cbb108 ("[NETFILTER]: Add nf_conntrack subsystem.")
Reported-by: Eric Garver <eric@garver.life>
Link: https://github.com/firewalld/firewalld/issues/1046
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Eric Garver <eric@garver.life>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Just a simple test to make sure we don't introduce unwanted compiler
warnings and API still supports passing enums as input argument.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20221130200013.2997831-2-andrii@kernel.org
C++ enum forward declarations are fundamentally not compatible with pure
C enum definitions, and so libbpf's use of `enum bpf_stats_type;`
forward declaration in libbpf/bpf.h public API header is causing C++
compilation issues.
More details can be found in [0], but it comes down to C++ supporting
enum forward declaration only with explicitly specified backing type:
enum bpf_stats_type: int;
In C (and I believe it's a GCC extension also), such forward declaration
is simply:
enum bpf_stats_type;
Further, in Linux UAPI this enum is defined in pure C way:
enum bpf_stats_type { BPF_STATS_RUN_TIME = 0; }
And even though in both cases backing type is int, which can be
confirmed by looking at DWARF information, for C++ compiler actual enum
definition and forward declaration are incompatible.
To eliminate this problem, for C++ mode define input argument as int,
which makes enum unnecessary in libbpf public header. This solves the
issue and as demonstrated by next patch doesn't cause any unwanted
compiler warnings, at least with default warnings setting.
[0] https://stackoverflow.com/questions/42766839/c11-enum-forward-causes-underlying-type-mismatch
[1] Closes: https://github.com/libbpf/libbpf/issues/249
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20221130200013.2997831-1-andrii@kernel.org
This patch removes the need to pin prog when attaching to tc ingress
in the btf_skc_cls_ingress test. Instead, directly use the
bpf_tc_hook_create() and bpf_tc_attach(). The qdisc clsact
will go away together with the netns, so no need to
bpf_tc_hook_destroy().
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20221129070900.3142427-8-martin.lau@linux.dev
After removing the mount/umount dance from {open,close}_netns()
in the pervious patch, "serial_" can be removed from
the tests using {open,close}_netns().
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20221129070900.3142427-7-martin.lau@linux.dev
The previous patches have removed the need to do the mount and umount
dance when switching netns. In particular:
* Avoid remounting /sys/fs/bpf to have a clean start
* Avoid remounting /sys to get a ifindex of a particular netns
This patch can finally remove the mount and umount dance in
{open,close}_netns which is unnecessarily complicated and
error-prone.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20221129070900.3142427-6-martin.lau@linux.dev
This patch removes the need to pin prog in the remaining tests in
tc_redirect.c by directly using the bpf_tc_hook_create() and
bpf_tc_attach(). The clsact qdisc will go away together with
the test netns, so no need to do bpf_tc_hook_destroy().
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20221129070900.3142427-5-martin.lau@linux.dev
This patch removes the need to pin prog in the tc_redirect_peer_l3
test by directly using the bpf_tc_hook_create() and bpf_tc_attach().
The clsact qdisc will go away together with the test netns, so
no need to do bpf_tc_hook_destroy().
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20221129070900.3142427-4-martin.lau@linux.dev
This patch removes the need to pin prog in the tc_redirect_dtime
test by directly using the bpf_tc_hook_create() and bpf_tc_attach().
The clsact qdisc will go away together with the test netns, so
no need to do bpf_tc_hook_destroy().
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20221129070900.3142427-3-martin.lau@linux.dev
When switching netns, the setns_by_fd() is doing dances in mount/umounting
the /sys directories. One reason is the tc_redirect.c test is depending
on the /sys/net/class/*/ifindex instead of using the if_nametoindex().
if_nametoindex() uses ioctl() to get the ifindex.
This patch is to move all /sys/net/class/*/ifindex usages to
if_nametoindex(). The current code checks ifindex >= 0 which is
incorrect. ifindex > 0 should be checked instead. This patch also
stores ifindex_veth_src and ifindex_veth_dst since the latter patch
will need them.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20221129070900.3142427-2-martin.lau@linux.dev
Torture test the cases where the runstate crosses a page boundary, and
and especially the case where it's configured in 32-bit mode and doesn't,
but then switching to 64-bit mode makes it go onto the second page.
To simplify this, make the KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_ADJUST ioctl
also update the guest runstate area. It already did so if the actual
runstate changed, as a side-effect of kvm_xen_update_runstate(). So
doing it in the plain adjustment case is making it more consistent, as
well as giving us a nice way to trigger the update without actually
running the vCPU again and changing the values.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Closer inspection of the Xen code shows that we aren't supposed to be
using the XEN_RUNSTATE_UPDATE flag unconditionally. It should be
explicitly enabled by guests through the HYPERVISOR_vm_assist hypercall.
If we randomly set the top bit of ->state_entry_time for a guest that
hasn't asked for it and doesn't expect it, that could make the runtimes
fail to add up and confuse the guest. Without the flag it's perfectly
safe for a vCPU to read its own vcpu_runstate_info; just not for one
vCPU to read *another's*.
I briefly pondered adding a word for the whole set of VMASST_TYPE_*
flags but the only one we care about for HVM guests is this, so it
seemed a bit pointless.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20221127122210.248427-3-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The guest runstate area can be arbitrarily byte-aligned. In fact, even
when a sane 32-bit guest aligns the overall structure nicely, the 64-bit
fields in the structure end up being unaligned due to the fact that the
32-bit ABI only aligns them to 32 bits.
So setting the ->state_entry_time field to something|XEN_RUNSTATE_UPDATE
is buggy, because if it's unaligned then we can't update the whole field
atomically; the low bytes might be observable before the _UPDATE bit is.
Xen actually updates the *byte* containing that top bit, on its own. KVM
should do the same.
In addition, we cannot assume that the runstate area fits within a single
page. One option might be to make the gfn_to_pfn cache cope with regions
that cross a page — but getting a contiguous virtual kernel mapping of a
discontiguous set of IOMEM pages is a distinctly non-trivial exercise,
and it seems this is the *only* current use case for the GPC which would
benefit from it.
An earlier version of the runstate code did use a gfn_to_hva cache for
this purpose, but it still had the single-page restriction because it
used the uhva directly — because it needs to be able to do so atomically
when the vCPU is being scheduled out, so it used pagefault_disable()
around the accesses and didn't just use kvm_write_guest_cached() which
has a fallback path.
So... use a pair of GPCs for the first and potential second page covering
the runstate area. We can get away with locking both at once because
nothing else takes more than one GPC lock at a time so we can invent
a trivial ordering rule.
The common case where it's all in the same page is kept as a fast path,
but in both cases, the actual guest structure (compat or not) is built
up from the fields in @vx, following preset pointers to the state and
times fields. The only difference is whether those pointers point to
the kernel stack (in the split case) or to guest memory directly via
the GPC. The fast path is also fixed to use a byte access for the
XEN_RUNSTATE_UPDATE bit, then the only real difference is the dual
memcpy.
Finally, Xen also does write the runstate area immediately when it's
configured. Flip the kvm_xen_update_runstate() and …_guest() functions
and call the latter directly when the runstate area is set. This means
that other ioctls which modify the runstate also write it immediately
to the guest when they do so, which is also intended.
Update the xen_shinfo_test to exercise the pathological case where the
XEN_RUNSTATE_UPDATE flag in the top byte of the state_entry_time is
actually in a different page to the rest of the 64-bit word.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The systemwide perf hardware breakpoint test tries to open a perf event
on each cpu. On large systems, we run out of file descriptors and fail
the test. Instead, have the test set the file descriptor limit to an
arbitraty high value.
Reported-by: Rohan Deshpande <rohan_d@linux.vnet.ibm.com>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/187fed5843cecc1e5066677b6296ee88337d7bef.1669096083.git.naveen.n.rao@linux.vnet.ibm.com
This patch first adds TFO support in mptcp_connect.c.
This can be enabled via a new option: -o MPTFO.
Once enabled, the TCP_FASTOPEN socket option is enabled for the server
side and a sendto() with MSG_FASTOPEN is used instead of a connect() for
the client side.
Note that the first SYN has a limit of bytes it can carry. In other
words, it is allowed to send less data than the provided one. We then
need to track more status info to properly allow the next sendmsg()
starting from the next part of the data to send the rest.
Also in TFO scenarios, we need to completely spool the partially xmitted
buffer -- and account for that -- before starting sendfile/mmap xmit,
otherwise the relevant tests will fail.
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Dmytro Shytyi <dmytro@shytyi.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the async test case was introduced, despite being a completely
independent test case, the command to run it was added to the same shell
script as the smoke test case. Since a shell script implicitly returns
the error code from the last run command, this effectively caused the
script to only return as error code the result from the async test case,
hiding the smoke test result (which could then only be seen from the
python unittest logs).
Move the async test case call to its own shell script runner to avoid
the aforementioned issue. This also makes the output clearer to read,
since each kselftest KTAP result now matches with one python unittest
report.
While at it, also make it so the async test case is skipped if
/dev/tpmrm0 doesn't exist, since commit 8335adb8f9 ("selftests: tpm:
add async space test with noneexisting handle") added a test that relies
on it.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
sysfs now supports splice_* operations with
commit f2d6c2708b ("kernfs: wire up ->splice_read and ->splice_write")
Update the selftests to expect success instead of failure.
Cc: Shuah Khan <shuah@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Siddharth Gupta <sidgup@codeaurora.org
Reported-by: Dilip Kota <dilip.kota@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Current release - new code bugs:
- eth: mlx5e:
- use kvfree() in mlx5e_accel_fs_tcp_create()
- MACsec, fix RX data path 16 RX security channel limit
- MACsec, fix memory leak when MACsec device is deleted
- MACsec, fix update Rx secure channel active field
- MACsec, fix add Rx security association (SA) rule memory leak
Previous releases - regressions:
- wifi: cfg80211: don't allow multi-BSSID in S1G
- stmmac: set MAC's flow control register to reflect current settings
- eth: mlx5:
- E-switch, fix duplicate lag creation
- fix use-after-free when reverting termination table
Previous releases - always broken:
- ipv4: fix route deletion when nexthop info is not specified
- bpf: fix a local storage BPF map bug where the value's spin lock
field can get initialized incorrectly
- tipc: re-fetch skb cb after tipc_msg_validate
- wifi: wilc1000: fix Information Element parsing
- packet: do not set TP_STATUS_CSUM_VALID on CHECKSUM_COMPLETE
- sctp: fix memory leak in sctp_stream_outq_migrate()
- can: can327: fix potential skb leak when netdev is down
- can: add number of missing netdev freeing on error paths
- aquantia: do not purge addresses when setting the number of rings
- wwan: iosm:
- fix incorrect skb length leading to truncated packet
- fix crash in peek throughput test due to skb UAF
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=0Lnw
-----END PGP SIGNATURE-----
Merge tag 'net-6.1-rc8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, can and wifi.
Current release - new code bugs:
- eth: mlx5e:
- use kvfree() in mlx5e_accel_fs_tcp_create()
- MACsec, fix RX data path 16 RX security channel limit
- MACsec, fix memory leak when MACsec device is deleted
- MACsec, fix update Rx secure channel active field
- MACsec, fix add Rx security association (SA) rule memory leak
Previous releases - regressions:
- wifi: cfg80211: don't allow multi-BSSID in S1G
- stmmac: set MAC's flow control register to reflect current settings
- eth: mlx5:
- E-switch, fix duplicate lag creation
- fix use-after-free when reverting termination table
Previous releases - always broken:
- ipv4: fix route deletion when nexthop info is not specified
- bpf: fix a local storage BPF map bug where the value's spin lock
field can get initialized incorrectly
- tipc: re-fetch skb cb after tipc_msg_validate
- wifi: wilc1000: fix Information Element parsing
- packet: do not set TP_STATUS_CSUM_VALID on CHECKSUM_COMPLETE
- sctp: fix memory leak in sctp_stream_outq_migrate()
- can: can327: fix potential skb leak when netdev is down
- can: add number of missing netdev freeing on error paths
- aquantia: do not purge addresses when setting the number of rings
- wwan: iosm:
- fix incorrect skb length leading to truncated packet
- fix crash in peek throughput test due to skb UAF"
* tag 'net-6.1-rc8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (79 commits)
net: ethernet: renesas: ravb: Fix promiscuous mode after system resumed
MAINTAINERS: Update maintainer list for chelsio drivers
ionic: update MAINTAINERS entry
sctp: fix memory leak in sctp_stream_outq_migrate()
packet: do not set TP_STATUS_CSUM_VALID on CHECKSUM_COMPLETE
net/mlx5: Lag, Fix for loop when checking lag
Revert "net/mlx5e: MACsec, remove replay window size limitation in offload path"
net: marvell: prestera: Fix a NULL vs IS_ERR() check in some functions
net: tun: Fix use-after-free in tun_detach()
net: mdiobus: fix unbalanced node reference count
net: hsr: Fix potential use-after-free
tipc: re-fetch skb cb after tipc_msg_validate
mptcp: fix sleep in atomic at close time
mptcp: don't orphan ssk in mptcp_close()
dsa: lan9303: Correct stat name
ipv4: Fix route deletion when nexthop info is not specified
net: wwan: iosm: fix incorrect skb length
net: wwan: iosm: fix crash in peek throughput test
net: wwan: iosm: fix dma_alloc_coherent incompatible pointer type
net: wwan: iosm: fix kernel test robot reported error
...
Signal that a test run is complete through perf_test_args instead of
having tests open code a similar solution. Ensure that the field resets
to false at the beginning of a test run as the structure is reused
between test runs, eliminating a couple of bugs:
access_tracking_perf_test hangs indefinitely on a subsequent test run,
as 'done' remains true. The bug doesn't amount to much right now, as x86
supports a single guest mode. However, this is a precondition of
enabling the test for other architectures with >1 guest mode, like
arm64.
memslot_modification_stress_test has the exact opposite problem, where
subsequent test runs complete immediately as 'run_vcpus' remains false.
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
[oliver: added commit message, preserve spin_wait_for_next_iteration()]
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221118211503.4049023-2-oliver.upton@linux.dev
The minimal alsa-lib configuration code is similar in both mixer
and pcm tests. Move this code to the shared conf.c source file.
Also, fix the build rules inspired by rseq tests. Build libatest.so
which is linked to the both test utilities dynamically.
Also, set the TEST_FILES variable for lib.mk.
Cc: linux-kselftest@vger.kernel.org
Cc: Shuah Khan <shuah@kernel.org>
Reported-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221129085306.2345763-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCY4AC5QAKCRDbK58LschI
g1e0AQCfAqduTy7mYd02jDNCV0wLphNp9FbPiP9OrQT37ABpKAEA1ulj1X59bX3d
HnZdDKuatcPZT9MV5hDLM7MFJ9GjOA4=
=fNmM
-----END PGP SIGNATURE-----
Daniel Borkmann says:
====================
bpf-next 2022-11-25
We've added 101 non-merge commits during the last 11 day(s) which contain
a total of 109 files changed, 8827 insertions(+), 1129 deletions(-).
The main changes are:
1) Support for user defined BPF objects: the use case is to allocate own
objects, build own object hierarchies and use the building blocks to
build own data structures flexibly, for example, linked lists in BPF,
from Kumar Kartikeya Dwivedi.
2) Add bpf_rcu_read_{,un}lock() support for sleepable programs,
from Yonghong Song.
3) Add support storing struct task_struct objects as kptrs in maps,
from David Vernet.
4) Batch of BPF map documentation improvements, from Maryam Tahhan
and Donald Hunter.
5) Improve BPF verifier to propagate nullness information for branches
of register to register comparisons, from Eduard Zingerman.
6) Fix cgroup BPF iter infra to hold reference on the start cgroup,
from Hou Tao.
7) Fix BPF verifier to not mark fentry/fexit program arguments as trusted
given it is not the case for them, from Alexei Starovoitov.
8) Improve BPF verifier's realloc handling to better play along with dynamic
runtime analysis tools like KASAN and friends, from Kees Cook.
9) Remove legacy libbpf mode support from bpftool,
from Sahid Orentino Ferdjaoui.
10) Rework zero-len skb redirection checks to avoid potentially breaking
existing BPF test infra users, from Stanislav Fomichev.
11) Two small refactorings which are independent and have been split out
of the XDP queueing RFC series, from Toke Høiland-Jørgensen.
12) Fix a memory leak in LSM cgroup BPF selftest, from Wang Yufen.
13) Documentation on how to run BPF CI without patch submission,
from Daniel Müller.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
Link: https://lore.kernel.org/r/20221125012450.441-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCY4ACtQAKCRDbK58LschI
gyIcAP4nE/chC+gYDOleloK2tQlQawM5Sa4kwHjFzBdPD3tRrAEAs6y2fJjb5vZo
OXIFKhXv5Xo3knmynkTSVSVOvB48IAE=
=Cme8
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
bpf 2022-11-25
We've added 10 non-merge commits during the last 8 day(s) which contain
a total of 7 files changed, 48 insertions(+), 30 deletions(-).
The main changes are:
1) Several libbpf ringbuf fixes related to probing for its availability,
size overflows when mmaping a 2G ringbuf and rejection of invalid
reservationsizes, from Hou Tao.
2) Fix a buggy return pointer in libbpf for attach_raw_tp function,
from Jiri Olsa.
3) Fix a local storage BPF map bug where the value's spin lock field
can get initialized incorrectly, from Xu Kuohai.
4) Two follow-up fixes in kprobe_multi BPF selftests for BPF CI,
from Jiri Olsa.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Make test_bench_attach serial
selftests/bpf: Filter out default_idle from kprobe_multi bench
bpf: Set and check spin lock value in sk_storage_map_test
bpf: Do not copy spin lock field from user in bpf_selem_alloc
libbpf: Check the validity of size in user_ring_buffer__reserve()
libbpf: Handle size overflow for user ringbuf mmap
libbpf: Handle size overflow for ringbuf mmap
libbpf: Use page size as max_entries when probing ring buffer map
bpf, perf: Use subprog name when reporting subprog ksymbol
libbpf: Use correct return pointer in attach_raw_tp
====================
Link: https://lore.kernel.org/r/20221125001034.29473-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the kernel receives a route deletion request from user space it
tries to delete a route that matches the route attributes specified in
the request.
If only prefix information is specified in the request, the kernel
should delete the first matching FIB alias regardless of its associated
FIB info. However, an error is currently returned when the FIB info is
backed by a nexthop object:
# ip nexthop add id 1 via 192.0.2.2 dev dummy10
# ip route add 198.51.100.0/24 nhid 1
# ip route del 198.51.100.0/24
RTNETLINK answers: No such process
Fix by matching on such a FIB info when legacy nexthop attributes are
not specified in the request. An earlier check already covers the case
where a nexthop ID is specified in the request.
Add tests that cover these flows. Before the fix:
# ./fib_nexthops.sh -t ipv4_fcnal
...
TEST: Delete route when not specifying nexthop attributes [FAIL]
Tests passed: 11
Tests failed: 1
After the fix:
# ./fib_nexthops.sh -t ipv4_fcnal
...
TEST: Delete route when not specifying nexthop attributes [ OK ]
Tests passed: 12
Tests failed: 0
No regressions in other tests:
# ./fib_nexthops.sh
...
Tests passed: 228
Tests failed: 0
# ./fib_tests.sh
...
Tests passed: 186
Tests failed: 0
Cc: stable@vger.kernel.org
Reported-by: Jonas Gorski <jonas.gorski@gmail.com>
Tested-by: Jonas Gorski <jonas.gorski@gmail.com>
Fixes: 493ced1ac4 ("ipv4: Allow routes to use nexthop objects")
Fixes: 6bf92d70e6 ("net: ipv4: fix route with nexthop object delete warning")
Fixes: 61b91eb33a ("ipv4: Handle attempt to delete multipath route when fib_info contains an nh reference")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20221124210932.2470010-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* Fixes for Xen emulation. While nobody should be enabling it in
the kernel (the only public users of the feature are the selftests),
the bug effectively allows userspace to read arbitrary memory.
* Correctness fixes for nested hypervisors that do not intercept INIT
or SHUTDOWN on AMD; the subsequent CPU reset can cause a use-after-free
when it disables virtualization extensions. While downgrading the panic
to a WARN is quite easy, the full fix is a bit more laborious; there
are also tests. This is the bulk of the pull request.
* Fix race condition due to incorrect mmu_lock use around
make_mmu_pages_available().
Generic:
* Obey changes to the kvm.halt_poll_ns module parameter in VMs
not using KVM_CAP_HALT_POLL, restoring behavior from before
the introduction of the capability
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmODI84UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPVJwgAombWOBf549JiHGPtwejuQO20nTSj
Om9pzWQ9dR182P+ju/FdqSPXt/Lc8i+z5zSXDrV3HQ6/a3zIItA+bOAUiMFvHNAQ
w/7pEb1MzVOsEg2SXGOjZvW3WouB4Z4R0PosInYjrFrRGRAaw5iaTOZHGezE44t2
WBWk1PpdMap7J/8sjNT1ble72ig9JdSW4qeJUQ1GWxHCigI5sESCQVqF446KM0jF
gTYPGX5TqpbWiIejF0yNew9yNKMi/yO4Pz8I5j3vtopeHx24DCIqUAGaEg6ykErX
vnzYbVP7NaFrqtje49PsK6i1cu2u7uFPArj0dxo3DviQVZVHV1q6tNmI4A==
=Qgei
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"x86:
- Fixes for Xen emulation. While nobody should be enabling it in the
kernel (the only public users of the feature are the selftests),
the bug effectively allows userspace to read arbitrary memory.
- Correctness fixes for nested hypervisors that do not intercept INIT
or SHUTDOWN on AMD; the subsequent CPU reset can cause a
use-after-free when it disables virtualization extensions. While
downgrading the panic to a WARN is quite easy, the full fix is a
bit more laborious; there are also tests. This is the bulk of the
pull request.
- Fix race condition due to incorrect mmu_lock use around
make_mmu_pages_available().
Generic:
- Obey changes to the kvm.halt_poll_ns module parameter in VMs not
using KVM_CAP_HALT_POLL, restoring behavior from before the
introduction of the capability"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: Update gfn_to_pfn_cache khva when it moves within the same page
KVM: x86/xen: Only do in-kernel acceleration of hypercalls for guest CPL0
KVM: x86/xen: Validate port number in SCHEDOP_poll
KVM: x86/mmu: Fix race condition in direct_page_fault
KVM: x86: remove exit_int_info warning in svm_handle_exit
KVM: selftests: add svm part to triple_fault_test
KVM: x86: allow L1 to not intercept triple fault
kvm: selftests: add svm nested shutdown test
KVM: selftests: move idt_entry to header
KVM: x86: forcibly leave nested mode on vCPU reset
KVM: x86: add kvm_leave_nested
KVM: x86: nSVM: harden svm_free_nested against freeing vmcb02 while still in use
KVM: x86: nSVM: leave nested mode on vCPU free
KVM: Obey kvm.halt_poll_ns in VMs not using KVM_CAP_HALT_POLL
KVM: Avoid re-reading kvm->max_halt_poll_ns during halt-polling
KVM: Cap vcpu->halt_poll_ns before halting rather than after
The latest version of grep claims the egrep is now obsolete so the build
now contains warnings that look like:
egrep: warning: egrep is obsolescent; using grep -E
fix this up by moving the related file to use "grep -E" instead.
sed -i "s/egrep/grep -E/g" `grep egrep -rwl tools/testing/selftests/ftrace`
Here are the steps to install the latest grep:
wget http://ftp.gnu.org/gnu/grep/grep-3.8.tar.gz
tar xf grep-3.8.tar.gz
cd grep-3.8 && ./configure && make
sudo make install
export PATH=/usr/local/bin:$PATH
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The latest version of grep claims the egrep is now obsolete so the build
now contains warnings that look like:
egrep: warning: egrep is obsolescent; using grep -E
fix this up by moving the related file to use "grep -E" instead.
sed -i "s/egrep/grep -E/g" `grep egrep -rwl tools/testing/selftests/gpio`
Here are the steps to install the latest grep:
wget http://ftp.gnu.org/gnu/grep/grep-3.8.tar.gz
tar xf grep-3.8.tar.gz
cd grep-3.8 && ./configure && make
sudo make install
export PATH=/usr/local/bin:$PATH
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The latest version of grep claims the egrep is now obsolete so the build
now contains warnings that look like:
egrep: warning: egrep is obsolescent; using grep -E
fix this up by moving the related file to use "grep -E" instead.
sed -i "s/egrep/grep -E/g" `grep egrep -rwl tools/testing/selftests`
Here are the steps to install the latest grep:
wget http://ftp.gnu.org/gnu/grep/grep-3.8.tar.gz
tar xf grep-3.8.tar.gz
cd grep-3.8 && ./configure && make
sudo make install
export PATH=/usr/local/bin:$PATH
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The default output of cpupower info utils shows unexpected output
when CPU 0 is disabled.
Considering a case where CPU 0 is disabled, output of cpupower idle-info:
Before change:
cpupower idle-info
CPUidle driver: pseries_idle
CPUidle governor: menu
analyzing CPU 0:
*is offline
After change:
./cpupower idle-info
CPUidle driver: pseries_idle
CPUidle governor: menu
analyzing CPU 50:
Number of idle states: 2
Available idle states: snooze CEDE
snooze:
Flags/Description: snooze
Latency: 0
Usage: 101748
Duration: 2724058
CEDE:
Flags/Description: CEDE
Latency: 12
Usage: 270004
Duration: 283019526849
If -c option is not passed, CPU 0 was chosen as the default chosen CPU to
display details. However when CPU 0 is offline, it results in showing
unexpected output. This commit chooses the base_cpu
instead of CPU 0, hence keeping the output more relevant in all cases.
The base_cpu is the number of CPU on which the calling thread is
currently executing.
Signed-off-by: Saket Kumar Bhaskar <skb99@linux.vnet.ibm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The newly added PCM test produces a binary which is not ignored by git
when built in tree, fix that.
Fixes: aba51cd094 ("selftests: alsa - add PCM test")
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20221125153654.1037868-1-broonie@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Since we now flush output immediately on starting children we should ensure
that the child name is set beforehand so that any output that does get
flushed from the newly created child has the name of the child attached.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221124120722.150988-1-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Add a few positive/negative tests to test bpf_rcu_read_lock()
and its corresponding verifier support. The new test will fail
on s390x and aarch64, so an entry is added to each of their
respective deny lists.
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221124053222.2374650-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Missed previously, add libpfm support for 'perf list' callbacks and
thereby JSON support.
Committer notes:
Add __maybe_unused to the args of the new print_libpfm_events() in the
else HAVE_LIBPFM block.
Fixes: e42b0ee61282a2f9 ("perf list: Add JSON output option")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Xin Gao <gaoxin@cdjrlc.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221118024607.409083-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use strbuf to make the string under construction's length unlimited. Use
the format %s to mean a literal string copy and %S to signify a need to
escape the string. Add supported for escaping a newline character.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Xin Gao <gaoxin@cdjrlc.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221118024607.409083-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rather than a newline starting from column 0, record a newline was
seen and then add the newline and space before the next word.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Xin Gao <gaoxin@cdjrlc.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221118024607.409083-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf doesn't provide proper symbol information for specially crafted
.debug files.
Sometimes .debug file may not have similar program header as runtime
ELF file. For example if we generate .debug file using objcopy
--only-keep-debug resulting file will not contain .text, .data and
other runtime sections. That means corresponding program headers will
have zero FileSiz and modified Offset.
Example: program header of text section of libxxx.so:
Type Offset VirtAddr PhysAddr
FileSiz MemSiz Flags Align
LOAD 0x00000000003d3000 0x00000000003d3000 0x00000000003d3000
0x000000000055ae80 0x000000000055ae80 R E 0x1000
Same program header after executing:
objcopy --only-keep-debug libxxx.so libxxx.so.debug
LOAD 0x0000000000001000 0x00000000003d3000 0x00000000003d3000
0x0000000000000000 0x000000000055ae80 R E 0x1000
Offset and FileSiz have been changed.
Following formula will not provide correct value, if program header
taken from .debug file (syms_ss):
sym.st_value -= phdr.p_vaddr - phdr.p_offset;
Correct program header information is located inside runtime ELF
file (runtime_ss).
Fixes: 2d86612aac ("perf symbol: Correct address for bss symbols")
Signed-off-by: Ajay Kaher <akaher@vmware.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Makhalov <amakhalov@vmware.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srivatsa S. Bhat <srivatsab@vmware.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Vasavi Sirnapalli <vsirnapalli@vmware.com>
Link: http://lore.kernel.org/lkml/1669198696-50547-1-git-send-email-akaher@vmware.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Update JSON events and metrics for alderlake to perf.
Based on ADL JSON event list v1.16:
https://github.com/intel/perfmon/tree/main/ADL/events
Generate the event list and metrics with the converter scripts:
https://github.com/intel/perfmon/pull/32
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221124031441.110134-4-zhengjun.xing@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add JSON metrics for Alderlake-N to perf.
It only included E-core metrics.
E-core metrics based on E-core TMA v2.2 (E-core_TMA_Metrics.csv)
It is downloaded from:
https://github.com/intel/perfmon/
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221124031441.110134-3-zhengjun.xing@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Alderlake-N only has E-core, it has been moved to non-hybrid code path on
the kernel side, so add the cpuid for Alderlake-N separately.
Add core event list for Alderlake-N, it is based on the
ADL gracemont v1.16 JSON file.
https://github.com/intel/perfmon/tree/main/ADL/events/
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221124031441.110134-1-zhengjun.xing@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It printed empty strings for each metric. I guess it's needed for CSV
output to match the column number. We could just ignore the empty
metrics in JSON but it ended up with a broken JSON object with a
trailing comma.
So I added a dummy '"metric-value" : "none"' part. To do that, it
needs to pass struct outstate to print_metric_end() to check if any
metric value is printed or not.
Before:
# perf stat -aj --metric-only --per-socket --for-each-cgroup system.slice true
{"socket" : "S0", "cpu-count" : 8, "cgroup" : "system.slice", "" : "", "" : "", "" : "", "" : "", "" : "", "" : "", "" : "", "" : ""}
After:
# perf stat -aj --metric-only --per-socket --for-each-cgroup system.slice true
{"socket" : "S0", "cpu-count" : 8, "cgroup" : "system.slice", "metric-value" : "none"}
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221123180208.2068936-16-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As the JSON output has been broken for a little while, I guess there are
not many users. Let's rename the field to more intuitive one. :)
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221123180208.2068936-15-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It generated a broken JSON output when aggregation mode or cgroup is
used with --metric-only option. Also get rid of the header line and
make the output single line for each entry.
It needs to know whether the current metric is the first one or not.
So add 'first' field in the outstate and mark it false after printing.
Before:
# perf stat -a -j --metric-only true
{"unit" : "GHz"}{"unit" : "insn per cycle"}{"unit" : "branch-misses of all branches"}
{{"metric-value" : "0.797"}{"metric-value" : "1.65"}{"metric-value" : "0.89"}
^
# perf stat -a -j --metric-only --per-socket true
{"unit" : "GHz"}{"unit" : "insn per cycle"}{"unit" : "branch-misses of all branches"}
{"socket" : "S0", "aggregate-number" : 8, {"metric-value" : "0.295"}{"metric-value" : "1.88"}{"metric-value" : "0.64"}
^
After:
# perf stat -a -j --metric-only true
{"GHz" : "0.990", "insn per cycle" : "2.06", "branch-misses of all branches" : "0.59"}
# perf stat -a -j --metric-only --per-socket true
{"socket" : "S0", "aggregate-number" : 8, "GHz" : "0.439", "insn per cycle" : "2.14", "branch-misses of all branches" : "0.51"}
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221123180208.2068936-14-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now most of the print functions take a pointer to the struct outstate.
We have one in the evlist__print_counters() and pass it through the
child functions.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221123180208.2068936-13-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It always passes a pointer to rt_stat as it's the only one. Let's not
pass it and directly refer it in the printout().
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221123180208.2068936-12-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The printout() takes a lot of arguments and sets an outstate with the
value. Instead, we can fill the outstate first and then pass it to
reduce the number of arguments.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221123180208.2068936-11-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It passes prefix and cgroup pointers but the outstate already has them.
Let's pass the outstate pointer instead.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221123180208.2068936-10-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is a preparation for the later cleanup. No functional changes
intended.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221123180208.2068936-9-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is a minor cleanup and preparation for the later change.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221123180208.2068936-8-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It already passes the stat_config argument, then it can find the value in the
config. No need to pass it separately.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221123180208.2068936-7-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It always passes a whitespace to the function, thus we can just add it to the
function body. Furthermore, it's only used in the normal output mode.
Well, actually CSV used it but it doesn't need to since we don't care about the
indentation or alignment in the CSV output.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221123180208.2068936-6-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It should not use sprintf() anymore. Let's pass the buffer size and use the
safer scnprintf() instead.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221123180208.2068936-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We don't care about the alignment in the CSV output as it's intended for machine
processing. Let's get rid of it to make the output more compact.
Before:
# perf stat -a --summary -I 1 -x, true
0.001149309,219.20,msec,cpu-clock,219322251,100.00,219.200,CPUs utilized
0.001149309,144,,context-switches,219241902,100.00,656.935,/sec
0.001149309,38,,cpu-migrations,219173705,100.00,173.358,/sec
0.001149309,61,,page-faults,219093635,100.00,278.285,/sec
0.001149309,10679310,,cycles,218746228,100.00,0.049,GHz
0.001149309,6288296,,instructions,218589869,100.00,0.59,insn per cycle
0.001149309,1386904,,branches,218428851,100.00,6.327,M/sec
0.001149309,56863,,branch-misses,218219951,100.00,4.10,of all branches
summary,219.20,msec,cpu-clock,219322251,100.00,20.025,CPUs utilized
summary,144,,context-switches,219241902,100.00,656.935,/sec
summary,38,,cpu-migrations,219173705,100.00,173.358,/sec
summary,61,,page-faults,219093635,100.00,278.285,/sec
summary,10679310,,cycles,218746228,100.00,0.049,GHz
summary,6288296,,instructions,218589869,100.00,0.59,insn per cycle
summary,1386904,,branches,218428851,100.00,6.327,M/sec
summary,56863,,branch-misses,218219951,100.00,4.10,of all branches
After:
0.001148449,224.75,msec,cpu-clock,224870589,100.00,224.747,CPUs utilized
0.001148449,176,,context-switches,224775564,100.00,783.103,/sec
0.001148449,38,,cpu-migrations,224707428,100.00,169.079,/sec
0.001148449,61,,page-faults,224629326,100.00,271.416,/sec
0.001148449,12172071,,cycles,224266368,100.00,0.054,GHz
0.001148449,6901907,,instructions,224108764,100.00,0.57,insn per cycle
0.001148449,1515655,,branches,223946693,100.00,6.744,M/sec
0.001148449,70027,,branch-misses,223735385,100.00,4.62,of all branches
summary,224.75,msec,cpu-clock,224870589,100.00,21.066,CPUs utilized
summary,176,,context-switches,224775564,100.00,783.103,/sec
summary,38,,cpu-migrations,224707428,100.00,169.079,/sec
summary,61,,page-faults,224629326,100.00,271.416,/sec
summary,12172071,,cycles,224266368,100.00,0.054,GHz
summary,6901907,,instructions,224108764,100.00,0.57,insn per cycle
summary,1515655,,branches,223946693,100.00,6.744,M/sec
summary,70027,,branch-misses,223735385,100.00,4.62,of all branches
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221123180208.2068936-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It matches to the prefix (interval timestamp), so better to have them together.
No functional change intended.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221123180208.2068936-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Verify when a bond is configured with {up,down}delay and the link state
of slave members flaps if there are no remaining members up the bond
should immediately select a member to bring up. (from bonding.txt
section 13.1 paragraph 4)
Suggested-by: Liang Li <liali@redhat.com>
Signed-off-by: Jonathan Toppins <jtoppins@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add some selftest testcases that validate the expected behavior of the
bpf_task_from_pid() kfunc that was added in the prior patch.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20221122145300.251210-3-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
It caused some troubles when a lock inside kmalloc is contended
because task local storage would allocate memory using kmalloc.
It'd create a recusion and even crash in my system.
There could be a couple of workarounds but I think the simplest
one is to use a pre-allocated hash map. We could fix the task
local storage to use the safe BPF allocator, but it takes time
so let's change this until it happens actually.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chris Li <chriscli@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20221118190109.1512674-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Using precise flag with br_inst_retired.near_call causes the test fail
on KVM guests, even when the guests have PMU forwarding enabled and the
event itself is supported.
Remove the precise flag in order to make the test work on KVM guests.
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Acked-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20221122083121.6012-1-mpetlan@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With perf inject -b, it synthesizes build-id event for DSOs. But it
missed to set the size and resulted in having trailing zeros.
As perf record sets the size in write_build_id(), let's set the size
here as well.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221119002750.1568027-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On IBM Power9, perf watchpoint tests fail since no hardware breakpoints
are available. Detect this by checking the error returned by
perf_event_open() and skip the tests in that case.
Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kajol Jain<kjain@linux.ibm.com>
Tested-by: Kajol Jain<kjain@linux.ibm.com>
Link: https://lore.kernel.org/r/20221121102747.208289-1-naveen.n.rao@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
augmented_raw_syscalls.c defines the bpf map 'syscalls' which is
initialized by perf tool in user space to indicate which system calls
are enabled for tracing, on the other flip eBPF program relies on the
map to filter out the trace events which are not enabled.
The map also includes a field 'string_args_len[6]' which presents the
string length if the corresponding argument is a string type.
Now the map 'syscalls' is not used, bpf program doesn't use it as filter
anymore, this is replaced by using the function bpf_tail_call() and
PROG_ARRAY syscalls map. And we don't need to explicitly set the string
length anymore, bpf_probe_read_str() is smart to copy the string and
return string length.
Therefore, it's safe to remove the bpf map 'syscalls'.
To consolidate the code, this patch removes the definition of map
'syscalls' from augmented_raw_syscalls.c and drops code for using
the map in the perf trace.
Note, since function trace__set_ev_qualifier_bpf_filter() is removed,
calling trace__init_syscall_bpf_progs() from it is also removed. We
don't need to worry it because trace__init_syscall_bpf_progs() is
still invoked from trace__init_syscalls_bpf_prog_array_maps() for
initialization the system call's bpf program callback.
After:
# perf trace -e examples/bpf/augmented_raw_syscalls.c,open* --max-events 10 perf stat --quiet sleep 0.001
openat(AT_FDCWD, "/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "/lib/aarch64-linux-gnu/libm.so.6", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "/lib/aarch64-linux-gnu/libelf.so.1", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "/lib/aarch64-linux-gnu/libdw.so.1", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "/lib/aarch64-linux-gnu/libunwind.so.8", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "/lib/aarch64-linux-gnu/libunwind-aarch64.so.8", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "/lib/aarch64-linux-gnu/libcrypto.so.3", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "/lib/aarch64-linux-gnu/libslang.so.2", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "/lib/aarch64-linux-gnu/libperl.so.5.34", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "/lib/aarch64-linux-gnu/libc.so.6", O_RDONLY|O_CLOEXEC) = 3
# perf trace -e examples/bpf/augmented_raw_syscalls.c --max-events 10 perf stat --quiet sleep 0.001
... [continued]: execve()) = 0
brk(NULL) = 0xaaaab1d28000
faccessat(-100, "/etc/ld.so.preload", 4) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3
close(3</usr/lib/aarch64-linux-gnu/libcrypto.so.3>) = 0
openat(AT_FDCWD, "/lib/aarch64-linux-gnu/libm.so.6", O_RDONLY|O_CLOEXEC) = 3
read(3</usr/lib/aarch64-linux-gnu/libcrypto.so.3>, 0xfffff33f70d0, 832) = 832
munmap(0xffffb5519000, 28672) = 0
munmap(0xffffb55b7000, 32880) = 0
mprotect(0xffffb55a6000, 61440, PROT_NONE) = 0
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20221121075237.127706-6-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The local variable 'syscall' is not used anymore, remove it.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20221121075237.127706-5-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On Arm64 a case is perf tools fails to find the corresponding trace
point folder for system calls listed in the table 'syscalltbl_arm64',
e.g. the generated system call table contains "lookup_dcookie" but we
cannot find out the matched trace point folder for it.
We need to figure out if there have any issue for the generated system
call table, on the other hand, we need to handle the case when trace
point folder is missed under sysfs, this patch sets the flag
syscall::nonexistent as true and returns the error from
trace__read_syscall_info().
Another problem is for trace__syscall_info(), it returns two different
values if a system call doesn't exist: at the first time calling
trace__syscall_info() it returns NULL when the system call doesn't exist,
later if call trace__syscall_info() again for the same missed system
call, it returns pointer of syscall. trace__syscall_info() checks the
condition 'syscalls.table[id].name == NULL', but the name will be
assigned in the first invoking even the system call is not found.
So checking system call's name in trace__syscall_info() is not the right
thing to do, this patch simply checks flag syscall::nonexistent to make
decision if a system call exists or not, finally trace__syscall_info()
returns the consistent result (NULL) if a system call doesn't existed.
Fixes: b8b1033fca ("perf trace: Mark syscall ids that are not allocated to avoid unnecessary error messages")
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: bpf@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221121075237.127706-4-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When a system call is not detected, the reason is either because the
system call ID is out of scope or failure to find the corresponding path
in the sysfs, trace__read_syscall_info() returns zero. Finally, without
returning an error value it introduces confusion for the caller.
This patch lets the function trace__read_syscall_info() to return
-EEXIST when a system call doesn't exist.
Fixes: b8b1033fca ("perf trace: Mark syscall ids that are not allocated to avoid unnecessary error messages")
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: bpf@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221121075237.127706-3-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch defines a macro RAW_SYSCALL_ARGS_NUM to replace the open
coded number '6'.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20221121075237.127706-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rather than controlling the list output with passed flags, add
callbacks that are called when an event or metric are
encountered. State is passed to the callback so that command line
options can be respected, alternatively the callbacks can be changed.
Fix a few bugs:
- wordwrap to columns metric descriptions and expressions;
- remove unnecessary whitespace after PMU event names;
- the metric filter is a glob but matched using strstr which will
always fail, switch to using a proper globmatch,
- the detail flag gives details for extra kernel PMU events like
branch-instructions.
In metricgroup.c switch from struct mep being a rbtree of metricgroups
containing a list of metrics, to the tree directly containing all the
metrics. In general the alias for a name is passed to the print
routine rather than being contained in the name with OR.
Committer notes:
Check the asprint() return to address this on fedora 36:
util/print-events.c: In function ‘print_sdt_events’:
util/print-events.c:183:33: error: ignoring return value of ‘asprintf’ declared with attribute ‘warn_unused_result’ [-Werror=unused-result]
183 | asprintf(&evt_name, "%s@%s(%.12s)", sdt_name->s, path, bid);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
$ gcc --version | head -1
gcc (GCC) 12.2.1 20220819 (Red Hat 12.2.1-2)
$
Fix ps.pmu_glob setting when dealing with *:* events, it was being left
with a freed pointer that then at the end of cmd_list() would be double
freed.
Check if pmu_name is NULL in default_print_event() before calling
strglobmatch(pmu_name, ...) to avoid a segfault.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Xin Gao <gaoxin@cdjrlc.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: http://lore.kernel.org/lkml/20221114210723.2749751-10-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The tools/lib includes fixes break LIBTRACEVENT_DYNAMIC as the makefile
erroneously had dependencies on building libtraceevent even when not
linking with it. This change fixes the issues with LIBTRACEEVENT_DYNAMIC
by making the built files optional.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20221116224631.207631-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that it can get rid of requirement of a compiler.
$ sudo ./perf test -v 109
109: Test data symbol :
--- start ---
test child forked, pid 844526
Recording workload...
[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.354 MB /tmp/__perf_test.perf.data.GFeZO (4847 samples) ]
Cleaning up files...
test child finished with 0
---- end ----
Test data symbol: Ok
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221116233854.1596378-13-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The datasym workload is to check if perf mem command gets the data
addresses precisely. This is needed for data symbol test.
$ perf test -w datasym
I had to keep the buf1 in the data section, otherwise it could end
up in the BSS and was mmaped as a separate //anon region, then it
was not symbolized at all. It needs to be fixed separately.
Committer notes:
Add a -U _FORTIFY_SOURCE to the datasym CFLAGS, as the main perf flags
set it and it requires building with optimization, and this new test has
a -O0.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221116233854.1596378-12-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that it can get rid of requirement of a compiler. Also rename the
symbols to match with the perf test workload.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: James Clark <james.clark@arm.com>
Acked-by: German Gomez <german.gomez@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221116233854.1596378-11-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The brstack is to run different kinds of branches repeatedly. This is
necessary for brstack test case to verify if it has correct branch info.
$ perf test -w brstack
I renamed the internal functions to have brstack_ prefix as it's too
generic name.
Add a -U_FORTIFY_SOURCE to the brstack CFLAGS, as the main perf flags
set it and it requires building with optimization, and this new test has
a -O0.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221116233854.1596378-10-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that it can get rid of requirement of a compiler. I've also removed
killall as it'll kill perf process now and run the test workload for 10
sec instead.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: James Clark <james.clark@arm.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221116233854.1596378-9-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The sqrtloop creates a child process to run an infinite loop calling
sqrt() with rand(). This is needed for ARM SPE fork test.
$ perf test -w sqrtloop
It can take an optional argument to specify how long it will run in
seconds (default: 1).
Committer notes:
Explicitely ignored the sqrt() return to fix the build on systems where
the compiler complains it isn't being used.
And added a sqrtloop specific CFLAGS to disable optimizations to make
this a bit more robust wrt dead code elimination.
Doing that a -U_FORTIFY_SOURCE needs to be added, as -O0 is incompatible
with it.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221116233854.1596378-8-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that it can get rid of requirement of a compiler.
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221116233854.1596378-7-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The leafloop workload is to run an infinite loop in the test_leaf
function. This is needed for the ARM fp callgraph test to verify if it
gets the correct callchains.
$ perf test -w leafloop
Committer notes:
Add a:
-U_FORTIFY_SOURCE
to the leafloop CFLAGS as the main perf flags set it and it requires
building with optimization, and this new test has a -O0.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221116233854.1596378-6-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Provide an implementation for arch_pc_relative_reloc(). It is needed to
pass the build once 61c6065ef7 ("objtool: Allow !PC relative
relocations") is merged.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
bpf_cgroup_ancestor() allows BPF programs to access the ancestor of a
struct cgroup *. This patch adds selftests that validate its expected
behavior.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20221122055458.173143-5-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch adds a selftest suite to validate the cgroup kfuncs that were
added in the prior patch.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20221122055458.173143-3-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently LLVM fails to recognize .data.* as data section and defaults to .text
section. Later BPF backend tries to emit 4-byte NOP instruction which doesn't
exist in BPF ISA and aborts.
The fix for LLVM is pending:
https://reviews.llvm.org/D138477
While waiting for the fix lets workaround the linked_list test case
by using .bss.* prefix which is properly recognized by LLVM as BSS section.
Fix libbpf to support .bss. prefix and adjust tests.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Install a cleanup function using the trap command for signals EXIT,
SIGINT, SIGQUIT and SIGABRT. The cleanup function will perform:
1. Online the CPUs that were made offline during the test.
2. Removing the cgroups created.
3. Restoring the original /sys/kernel/debug/sched/verbose value,
currently it's left turned on, irrespective of the original
configuration value.
the test performs steps 1 and 2, on the successful runs, but not during
all of the failed runs. With the cleanup(), the system will perform all
three steps during failed/passed test runs.
Signed-off-by: Kamalesh Babulal <kamalesh.babulal@oracle.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Add checking of the test return value, otherwise it will report success
forever for test_create_read().
Fixes: dff6d2ae56 ("selftests/efivarfs: clean up test files from test_create*()")
Signed-off-by: Zhao Gongyi <zhaogongyi@huawei.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The selftests/net does not have proper cross-compilation support, and
does not properly state libbpf as a dependency. Mimic/copy the BPF
build from selftests/bpf, which has the nice side-effect that libbpf
is built as well.
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Anders Roxell <anders.roxell@linaro.org>
Link: https://lore.kernel.org/r/20221119171841.2014936-1-bjorn@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmN6wAgeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG0EYH/3/RO90NbrFItraN
Lzr+d3VdbGjTu8xd1M+PRTmwh3zxLpB+Jwqr0T0A2gzL9B/D+AUPUJdrCVbv9DqS
FLJAVqoeV20dNBAHSffOOLPsgCZ+Eu+LzlNN7Iqde0e8cyZICFMNktitui84Xm/i
1NgFVgz9OZ6+aieYvUj3FrFq0p8GTIaC/oybDZrxYKcO8ZzKVMJ11swRw10wwq0g
qOOECvV3w7wlQ8upQZkzFxItKFc7EexZI6R4elXeGSJJ9Hlc092dv/zsKB9dwV+k
WcwkJrZRoezYXzgGBFxUcQtzi+ethjrPjuJuM1rYLUSIcfIW/0lkaSLgRoBu8D+I
1GfXkXs=
=gt6P
-----END PGP SIGNATURE-----
Merge tag 'v6.1-rc6' into x86/core, to resolve conflicts
Resolve conflicts between these commits in arch/x86/kernel/asm-offsets.c:
# upstream:
debc5a1ec0 ("KVM: x86: use a separate asm-offsets.c file")
# retbleed work in x86/core:
5d8213864a ("x86/retbleed: Add SKL return thunk")
... and these commits in include/linux/bpf.h:
# upstram:
18acb7fac2 ("bpf: Revert ("Fix dispatcher patchable function entry to 5 bytes nop")")
# x86/core commits:
931ab63664 ("x86/ibt: Implement FineIBT")
bea75b3389 ("x86/Kconfig: Introduce function padding")
The latter two modify BPF_DISPATCHER_ATTRIBUTES(), which was removed upstream.
Conflicts:
arch/x86/kernel/asm-offsets.c
include/linux/bpf.h
Signed-off-by: Ingo Molnar <mingo@kernel.org>
LWT_XMIT to test L3 case, TC to test L2 case.
v2:
- s/veth_ifindex/ipip_ifindex/ in two places (Martin)
- add comment about which condition triggers the rejection (Martin)
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20221121180340.1983627-2-sdf@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Alexei hit another rcu warnings because of this test.
Making test_bench_attach serial so it does not disrupts
other tests during parallel tests run.
While this change is not the fix, it should be less likely
to hit it with this test being executed serially.
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20221116100228.2064612-2-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Alexei hit following rcu warning when running prog_test -j.
[ 128.049567] WARNING: suspicious RCU usage
[ 128.049569] 6.1.0-rc2 #912 Tainted: G O
...
[ 128.050944] kprobe_multi_link_handler+0x6c/0x1d0
[ 128.050947] ? kprobe_multi_link_handler+0x42/0x1d0
[ 128.050950] ? __cpuidle_text_start+0x8/0x8
[ 128.050952] ? __cpuidle_text_start+0x8/0x8
[ 128.050958] fprobe_handler.part.1+0xac/0x150
[ 128.050964] 0xffffffffa02130c8
[ 128.050991] ? default_idle+0x5/0x20
[ 128.050998] default_idle+0x5/0x20
It's caused by bench test attaching kprobe_multi link to default_idle
function, which is not executed in rcu safe context so the kprobe
handler on top of it will trigger the rcu warning.
Filtering out default_idle function from the bench test.
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20221116100228.2064612-1-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Update sk_storage_map_test to make sure kernel does not copy user
non-zero value spin lock to kernel, and does not copy kernel spin
lock value to user.
If user spin lock value is copied to kernel, this test case will
make kernel spin on the copied lock, resulting in rcu stall and
softlockup.
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/r/20221114134720.1057939-3-xukuohai@huawei.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The test closes both iterator link fd and cgroup fd, and removes the
cgroup file to make a dead cgroup before reading from cgroup iterator.
It also uses kern_sync_rcu() and usleep() to wait for the release of
start cgroup. If the start cgroup is not pinned by cgroup iterator,
reading from iterator fd will trigger use-after-free.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/bpf/20221121073440.1828292-4-houtao@huaweicloud.com
Add remove_cgroup() to remove a cgroup which doesn't have any children
or live processes. It will be used by the following patch to test cgroup
iterator on a dead cgroup.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20221121073440.1828292-3-houtao@huaweicloud.com
The `nettest` binary, built from `selftests/net/nettest.c`,
was expected to be found in the path during test execution of
`fcnal-test.sh` and `pmtu.sh`, leading to tests getting
skipped when the binary is not installed in the system, as can
be seen in these logs found in the wild [1]:
# TEST: vti4: PMTU exceptions [SKIP]
[ 350.600250] IPv6: ADDRCONF(NETDEV_CHANGE): veth_b: link becomes ready
[ 350.607421] IPv6: ADDRCONF(NETDEV_CHANGE): veth_a: link becomes ready
# 'nettest' command not found; skipping tests
# xfrm6udp not supported
# TEST: vti6: PMTU exceptions (ESP-in-UDP) [SKIP]
[ 351.605102] IPv6: ADDRCONF(NETDEV_CHANGE): veth_b: link becomes ready
[ 351.612243] IPv6: ADDRCONF(NETDEV_CHANGE): veth_a: link becomes ready
# 'nettest' command not found; skipping tests
# xfrm4udp not supported
The `unicast_extensions.sh` tests also rely on `nettest`, but
it runs fine there because it looks for the binary in the
current working directory [2]:
The same mechanism that works for the Unicast extensions tests
is here copied over to the PMTU and functional tests.
[1] https://lkft.validation.linaro.org/scheduler/job/5839508#L6221
[2] https://lkft.validation.linaro.org/scheduler/job/5839508#L7958
Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Conform to the rest of Hyper-V emulation selftests which have 'hyperv'
prefix. Get rid of '_test' suffix as well as the purpose of this code
is fairly obvious.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-49-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Enable Hyper-V L2 TLB flush and check that Hyper-V TLB flush hypercalls
from L2 don't exit to L1 unless 'TlbLockCount' is set in the Partition
assist page.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-48-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Enable Hyper-V L2 TLB flush and check that Hyper-V TLB flush hypercalls
from L2 don't exit to L1 unless 'TlbLockCount' is set in the
Partition assist page.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-47-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Hyper-V MSR-Bitmap tests do RDMSR from L2 to exit to L1. While 'evmcs_test'
correctly clobbers all GPRs (which are not preserved), 'hyperv_svm_test'
does not. Introduce a more generic rdmsr_from_l2() to avoid code
duplication and remove hardcoding of MSRs. Do not put it in common code
because it is really just a selftests bug rather than a processor
feature that requires it.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-46-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
vmmcall()/vmcall() are used to exit from L2 to L1 and no concrete hypercall
ABI is currenty followed. With the introduction of Hyper-V L2 TLB flush
it becomes (theoretically) possible that L0 will take responsibility for
handling the call and no L1 exit will happen. Prevent this by stuffing RAX
(KVM ABI) and RCX (Hyper-V ABI) with 'safe' values.
While on it, convert vmmcall() to 'static inline', make it setup stack
frame and move to include/x86_64/svm_util.h.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-45-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There's no need to pollute VMX and SVM code with Hyper-V specific
stuff and allocate Hyper-V specific test pages for all test as only
few really need them. Create a dedicated struct and an allocation
helper.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-43-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In preparation to putting Hyper-V specific test pages to a dedicated
struct, move eVMCS load logic from load_vmcs(). Tests call load_vmcs()
directly and the only one which needs 'enlightened' version is
evmcs_test so there's not much gain in having this merged.
Temporary pass both GPA and HVA to load_evmcs().
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-42-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Hyper-V VP assist page is not eVMCS specific, it is also used for
enlightened nSVM. Move the code to vendor neutral place.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-41-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
'struct hv_vp_assist_page' definition doesn't match TLFS. Also, define
'struct hv_nested_enlightenments_control' and use it instead of opaque
'__u64'.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-40-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
'struct hv_enlightened_vmcs' definition in selftests is not '__packed'
and so we rely on the compiler doing the right padding. This is not
obvious so it seems beneficial to use the same definition as in kernel.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-39-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce a selftest for Hyper-V PV TLB flush hypercalls
(HvFlushVirtualAddressSpace/HvFlushVirtualAddressSpaceEx,
HvFlushVirtualAddressList/HvFlushVirtualAddressListEx).
The test creates one 'sender' vCPU and two 'worker' vCPU which do busy
loop reading from a certain GVA checking the observed value. Sender
vCPU swaos the data page with another page filled with a different value.
The expectation for workers is also altered. Without TLB flush on worker
vCPUs, they may continue to observe old value. To guard against accidental
TLB flushes for worker vCPUs the test is repeated 100 times.
Hyper-V TLB flush hypercalls are tested in both 'normal' and 'XMM
fast' modes.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-38-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Extend the test to check the scenario when NCI core tries to send data
to already closed device to ensure that nothing bad happens.
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Bongsu Jeon <bongsu.jeon@samsung.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
The structure and content of the On Demand registers is based on the GUID
which is read from hardware through sysfs. Add support for decoding the
registers of a new GUID 0xF210D9EF.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20221119002343.1281885-9-david.e.box@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Intel Software Defined Silicon (SDSi) is now officially known as Intel
On Demand. Change text in tool to indicate this.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20221119002343.1281885-7-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The function contains a single btf__free() call which can be
inlined. Credits to Yonghong Song.
Signed-off-by: Sahid Orentino Ferdjaoui <sahid.ferdjaoui@industrialdiscipline.com>
Acked-by: Yonghong Song <yhs@fb.com>
Suggested-by: Yonghong Song <yhs@fb.com>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20221120112515.38165-6-sahid.ferdjaoui@industrialdiscipline.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
bpftool is now totally compliant with libbpf 1.0 mode and is not
expected to be compiled with pre-1.0, let's clean-up the usage of
libbpf_get_error().
The changes stay aligned with returned errors always negative.
- In tools/bpf/bpftool/btf.c This fixes an uninitialized local
variable `err` in function do_dump() because it may now be returned
without having been set.
- This also removes the checks on NULL pointers before calling
btf__free() because that function already does the check.
Signed-off-by: Sahid Orentino Ferdjaoui <sahid.ferdjaoui@industrialdiscipline.com>
Link: https://lore.kernel.org/r/20221120112515.38165-5-sahid.ferdjaoui@industrialdiscipline.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
It is expected that errno be passed to strerror(). This also cleans
this part of code from using libbpf_get_error().
Signed-off-by: Sahid Orentino Ferdjaoui <sahid.ferdjaoui@industrialdiscipline.com>
Acked-by: Yonghong Song <yhs@fb.com>
Suggested-by: Quentin Monnet <quentin@isovalent.com>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20221120112515.38165-4-sahid.ferdjaoui@industrialdiscipline.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
There is no reasons to keep PTR_ERR() when kern_btf=NULL, let's just
return 0.
This also cleans this part of code from using libbpf_get_error().
Signed-off-by: Sahid Orentino Ferdjaoui <sahid.ferdjaoui@industrialdiscipline.com>
Acked-by: Yonghong Song <yhs@fb.com>
Suggested-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20221120112515.38165-3-sahid.ferdjaoui@industrialdiscipline.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Three tests are added. One is from John Fastabend ({1]) which tests
tracing style access for xdp program from the kernel ctx.
Another is a tc test to test both kernel ctx tracing style access
and explicit non-ctx type cast. The third one is for negative tests
including two tests, a tp_bpf test where the bpf_rdonly_cast()
returns a untrusted ptr which cannot be used as helper argument,
and a tracepoint test where the kernel ctx is a u64.
Also added the test to DENYLIST.s390x since s390 does not currently
support calling kernel functions in JIT mode.
[1] https://lore.kernel.org/bpf/20221109215242.1279993-1-john.fastabend@gmail.com/
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221120195442.3114844-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
A previous change added a series of kfuncs for storing struct
task_struct objects as referenced kptrs. This patch adds a new
task_kfunc test suite for validating their expected behavior.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20221120051004.3605026-5-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Kfuncs currently support specifying the KF_TRUSTED_ARGS flag to signal
to the verifier that it should enforce that a BPF program passes it a
"safe", trusted pointer. Currently, "safe" means that the pointer is
either PTR_TO_CTX, or is refcounted. There may be cases, however, where
the kernel passes a BPF program a safe / trusted pointer to an object
that the BPF program wishes to use as a kptr, but because the object
does not yet have a ref_obj_id from the perspective of the verifier, the
program would be unable to pass it to a KF_ACQUIRE | KF_TRUSTED_ARGS
kfunc.
The solution is to expand the set of pointers that are considered
trusted according to KF_TRUSTED_ARGS, so that programs can invoke kfuncs
with these pointers without getting rejected by the verifier.
There is already a PTR_UNTRUSTED flag that is set in some scenarios,
such as when a BPF program reads a kptr directly from a map
without performing a bpf_kptr_xchg() call. These pointers of course can
and should be rejected by the verifier. Unfortunately, however,
PTR_UNTRUSTED does not cover all the cases for safety that need to
be addressed to adequately protect kfuncs. Specifically, pointers
obtained by a BPF program "walking" a struct are _not_ considered
PTR_UNTRUSTED according to BPF. For example, say that we were to add a
kfunc called bpf_task_acquire(), with KF_ACQUIRE | KF_TRUSTED_ARGS, to
acquire a struct task_struct *. If we only used PTR_UNTRUSTED to signal
that a task was unsafe to pass to a kfunc, the verifier would mistakenly
allow the following unsafe BPF program to be loaded:
SEC("tp_btf/task_newtask")
int BPF_PROG(unsafe_acquire_task,
struct task_struct *task,
u64 clone_flags)
{
struct task_struct *acquired, *nested;
nested = task->last_wakee;
/* Would not be rejected by the verifier. */
acquired = bpf_task_acquire(nested);
if (!acquired)
return 0;
bpf_task_release(acquired);
return 0;
}
To address this, this patch defines a new type flag called PTR_TRUSTED
which tracks whether a PTR_TO_BTF_ID pointer is safe to pass to a
KF_TRUSTED_ARGS kfunc or a BPF helper function. PTR_TRUSTED pointers are
passed directly from the kernel as a tracepoint or struct_ops callback
argument. Any nested pointer that is obtained from walking a PTR_TRUSTED
pointer is no longer PTR_TRUSTED. From the example above, the struct
task_struct *task argument is PTR_TRUSTED, but the 'nested' pointer
obtained from 'task->last_wakee' is not PTR_TRUSTED.
A subsequent patch will add kfuncs for storing a task kfunc as a kptr,
and then another patch will add selftests to validate.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20221120051004.3605026-3-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
So that it can get rid of requirements for a compiler.
$ sudo ./perf test -v 92
92: perf record tests :
--- start ---
test child forked, pid 740204
Basic --per-thread mode test
Basic --per-thread mode test [Success]
Register capture test
Register capture test [Success]
Basic --system-wide mode test
Basic --system-wide mode test [Success]
Basic target workload test
Basic target workload test [Success]
test child finished with 0
---- end ----
perf record tests: Ok
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221116233854.1596378-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The thloop is similar to noploop but runs in two threads. This is
needed to verify perf record --per-thread to handle multi-threaded
programs properly.
$ perf test -w thloop
It also takes an optional argument to specify runtime in seconds
(default: 1).
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221116233854.1596378-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that it can get rid of requirement of a compiler.
Also define and use more local symbols to ease future changes.
$ sudo ./perf test -v pipe
87: perf pipe recording and injection test :
--- start ---
test child forked, pid 748003
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.000 MB - ]
748014 748014 -1 |perf
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.000 MB - ]
99.83% perf perf [.] noploop
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.000 MB - ]
99.85% perf perf [.] noploop
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.160 MB /tmp/perf.data.2XYPdw (4007 samples) ]
99.83% perf perf [.] noploop
test child finished with 0
---- end ----
perf pipe recording and injection test: Ok
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221116233854.1596378-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The -w/--workload option is to run a simple workload used by testing.
This adds a basic framework to run the workloads and 'noploop' workload
as an example.
$ perf test -w noploop
The noploop does a loop doing nothing (NOP) for a second by default.
It can have an optional argument to specify the time in seconds.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221116233854.1596378-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add libtraceevent to the name so that this install_headers build
appears different to similar targets in different libraries. Add ;
after kbuffer.h install target for consistency.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Hao Luo <haoluo@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20221117004356.279422-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add libsubcmd to the name so that this install_headers build appears
different to similar targets in different libraries.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Hao Luo <haoluo@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20221117004356.279422-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add libperf to the name so that this install_headers build appears
different to similar targets in different libraries.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Hao Luo <haoluo@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20221117004356.279422-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Missing @ when building libsymbol. Make the install echo specific to
installing the libsymbol headers.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Hao Luo <haoluo@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20221117004356.279422-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf build makes the install_headers target, however, as there is
no action for this target a warning is always produced of:
make[3]: Nothing to be done for 'install_headers'.
Solve this by adding a display of 'INSTALL libbpf_headers'.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Hao Luo <haoluo@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20221117004356.279422-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add missing backslash that caused an install command to always appear
in build output. Make the install headers more specific.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Hao Luo <haoluo@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20221117004356.279422-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
