Rework and rename "struct kvm_hva_range" into "kvm_mmu_notifier_range" so
that the structure can be used to handle notifications that operate on gfn
context, i.e. that aren't tied to a host virtual address. Rename the
handler typedef too (arguably it should always have been gfn_handler_t).
Practically speaking, this is a nop for 64-bit kernels as the only
meaningful change is to store start+end as u64s instead of unsigned longs.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Message-Id: <20231027182217.3615211-2-seanjc@google.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Clean up vCPU targets, always returning generic v8 as the preferred target
* Trap forwarding infrastructure for nested virtualization (used for traps
that are taken from an L2 guest and are needed by the L1 hypervisor)
* FEAT_TLBIRANGE support to only invalidate specific ranges of addresses
when collapsing a table PTE to a block PTE. This avoids that the guest
refills the TLBs again for addresses that aren't covered by the table PTE.
* Fix vPMU issues related to handling of PMUver.
* Don't unnecessary align non-stack allocations in the EL2 VA space
* Drop HCR_VIRT_EXCP_MASK, which was never used...
* Don't use smp_processor_id() in kvm_arch_vcpu_load(),
but the cpu parameter instead
* Drop redundant call to kvm_set_pfn_accessed() in user_mem_abort()
* Remove prototypes without implementations
RISC-V:
* Zba, Zbs, Zicntr, Zicsr, Zifencei, and Zihpm support for guest
* Added ONE_REG interface for SATP mode
* Added ONE_REG interface to enable/disable multiple ISA extensions
* Improved error codes returned by ONE_REG interfaces
* Added KVM_GET_REG_LIST ioctl() implementation for KVM RISC-V
* Added get-reg-list selftest for KVM RISC-V
s390:
* PV crypto passthrough enablement (Tony, Steffen, Viktor, Janosch)
Allows a PV guest to use crypto cards. Card access is governed by
the firmware and once a crypto queue is "bound" to a PV VM every
other entity (PV or not) looses access until it is not bound
anymore. Enablement is done via flags when creating the PV VM.
* Guest debug fixes (Ilya)
x86:
* Clean up KVM's handling of Intel architectural events
* Intel bugfixes
* Add support for SEV-ES DebugSwap, allowing SEV-ES guests to use debug
registers and generate/handle #DBs
* Clean up LBR virtualization code
* Fix a bug where KVM fails to set the target pCPU during an IRTE update
* Fix fatal bugs in SEV-ES intrahost migration
* Fix a bug where the recent (architecturally correct) change to reinject
#BP and skip INT3 broke SEV guests (can't decode INT3 to skip it)
* Retry APIC map recalculation if a vCPU is added/enabled
* Overhaul emergency reboot code to bring SVM up to par with VMX, tie the
"emergency disabling" behavior to KVM actually being loaded, and move all of
the logic within KVM
* Fix user triggerable WARNs in SVM where KVM incorrectly assumes the TSC
ratio MSR cannot diverge from the default when TSC scaling is disabled
up related code
* Add a framework to allow "caching" feature flags so that KVM can check if
the guest can use a feature without needing to search guest CPUID
* Rip out the ancient MMU_DEBUG crud and replace the useful bits with
CONFIG_KVM_PROVE_MMU
* Fix KVM's handling of !visible guest roots to avoid premature triple fault
injection
* Overhaul KVM's page-track APIs, and KVMGT's usage, to reduce the API surface
that is needed by external users (currently only KVMGT), and fix a variety
of issues in the process
This last item had a silly one-character bug in the topic branch that
was sent to me. Because it caused pretty bad selftest failures in
some configurations, I decided to squash in the fix. So, while the
exact commit ids haven't been in linux-next, the code has (from the
kvm-x86 tree).
Generic:
* Wrap kvm_{gfn,hva}_range.pte in a union to allow mmu_notifier events to pass
action specific data without needing to constantly update the main handlers.
* Drop unused function declarations
Selftests:
* Add testcases to x86's sync_regs_test for detecting KVM TOCTOU bugs
* Add support for printf() in guest code and covert all guest asserts to use
printf-based reporting
* Clean up the PMU event filter test and add new testcases
* Include x86 selftests in the KVM x86 MAINTAINERS entry
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmT1m0kUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMNgggAiN7nz6UC423FznuI+yO3TLm8tkx1
CpKh5onqQogVtchH+vrngi97cfOzZb1/AtifY90OWQi31KEWhehkeofcx7G6ERhj
5a9NFADY1xGBsX4exca/VHDxhnzsbDWaWYPXw5vWFWI6erft9Mvy3tp1LwTvOzqM
v8X4aWz+g5bmo/DWJf4Wu32tEU6mnxzkrjKU14JmyqQTBawVmJ3RYvHVJ/Agpw+n
hRtPAy7FU6XTdkmq/uCT+KUHuJEIK0E/l1js47HFAqSzwdW70UDg14GGo1o4ETxu
RjZQmVNvL57yVgi6QU38/A0FWIsWQm5IlaX1Ug6x8pjZPnUKNbo9BY4T1g==
=W+4p
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- Clean up vCPU targets, always returning generic v8 as the preferred
target
- Trap forwarding infrastructure for nested virtualization (used for
traps that are taken from an L2 guest and are needed by the L1
hypervisor)
- FEAT_TLBIRANGE support to only invalidate specific ranges of
addresses when collapsing a table PTE to a block PTE. This avoids
that the guest refills the TLBs again for addresses that aren't
covered by the table PTE.
- Fix vPMU issues related to handling of PMUver.
- Don't unnecessary align non-stack allocations in the EL2 VA space
- Drop HCR_VIRT_EXCP_MASK, which was never used...
- Don't use smp_processor_id() in kvm_arch_vcpu_load(), but the cpu
parameter instead
- Drop redundant call to kvm_set_pfn_accessed() in user_mem_abort()
- Remove prototypes without implementations
RISC-V:
- Zba, Zbs, Zicntr, Zicsr, Zifencei, and Zihpm support for guest
- Added ONE_REG interface for SATP mode
- Added ONE_REG interface to enable/disable multiple ISA extensions
- Improved error codes returned by ONE_REG interfaces
- Added KVM_GET_REG_LIST ioctl() implementation for KVM RISC-V
- Added get-reg-list selftest for KVM RISC-V
s390:
- PV crypto passthrough enablement (Tony, Steffen, Viktor, Janosch)
Allows a PV guest to use crypto cards. Card access is governed by
the firmware and once a crypto queue is "bound" to a PV VM every
other entity (PV or not) looses access until it is not bound
anymore. Enablement is done via flags when creating the PV VM.
- Guest debug fixes (Ilya)
x86:
- Clean up KVM's handling of Intel architectural events
- Intel bugfixes
- Add support for SEV-ES DebugSwap, allowing SEV-ES guests to use
debug registers and generate/handle #DBs
- Clean up LBR virtualization code
- Fix a bug where KVM fails to set the target pCPU during an IRTE
update
- Fix fatal bugs in SEV-ES intrahost migration
- Fix a bug where the recent (architecturally correct) change to
reinject #BP and skip INT3 broke SEV guests (can't decode INT3 to
skip it)
- Retry APIC map recalculation if a vCPU is added/enabled
- Overhaul emergency reboot code to bring SVM up to par with VMX, tie
the "emergency disabling" behavior to KVM actually being loaded,
and move all of the logic within KVM
- Fix user triggerable WARNs in SVM where KVM incorrectly assumes the
TSC ratio MSR cannot diverge from the default when TSC scaling is
disabled up related code
- Add a framework to allow "caching" feature flags so that KVM can
check if the guest can use a feature without needing to search
guest CPUID
- Rip out the ancient MMU_DEBUG crud and replace the useful bits with
CONFIG_KVM_PROVE_MMU
- Fix KVM's handling of !visible guest roots to avoid premature
triple fault injection
- Overhaul KVM's page-track APIs, and KVMGT's usage, to reduce the
API surface that is needed by external users (currently only
KVMGT), and fix a variety of issues in the process
Generic:
- Wrap kvm_{gfn,hva}_range.pte in a union to allow mmu_notifier
events to pass action specific data without needing to constantly
update the main handlers.
- Drop unused function declarations
Selftests:
- Add testcases to x86's sync_regs_test for detecting KVM TOCTOU bugs
- Add support for printf() in guest code and covert all guest asserts
to use printf-based reporting
- Clean up the PMU event filter test and add new testcases
- Include x86 selftests in the KVM x86 MAINTAINERS entry"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (279 commits)
KVM: x86/mmu: Include mmu.h in spte.h
KVM: x86/mmu: Use dummy root, backed by zero page, for !visible guest roots
KVM: x86/mmu: Disallow guest from using !visible slots for page tables
KVM: x86/mmu: Harden TDP MMU iteration against root w/o shadow page
KVM: x86/mmu: Harden new PGD against roots without shadow pages
KVM: x86/mmu: Add helper to convert root hpa to shadow page
drm/i915/gvt: Drop final dependencies on KVM internal details
KVM: x86/mmu: Handle KVM bookkeeping in page-track APIs, not callers
KVM: x86/mmu: Drop @slot param from exported/external page-track APIs
KVM: x86/mmu: Bug the VM if write-tracking is used but not enabled
KVM: x86/mmu: Assert that correct locks are held for page write-tracking
KVM: x86/mmu: Rename page-track APIs to reflect the new reality
KVM: x86/mmu: Drop infrastructure for multiple page-track modes
KVM: x86/mmu: Use page-track notifiers iff there are external users
KVM: x86/mmu: Move KVM-only page-track declarations to internal header
KVM: x86: Remove the unused page-track hook track_flush_slot()
drm/i915/gvt: switch from ->track_flush_slot() to ->track_remove_region()
KVM: x86: Add a new page-track hook to handle memslot deletion
drm/i915/gvt: Don't bother removing write-protection on to-be-deleted slot
KVM: x86: Reject memslot MOVE operations if KVMGT is attached
...
- Wrap kvm_{gfn,hva}_range.pte in a union to allow mmu_notifier events to pass
action specific data without needing to constantly update the main handlers.
- Drop unused function declarations
-----BEGIN PGP SIGNATURE-----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=n819
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-generic-6.6' of https://github.com/kvm-x86/linux into HEAD
Common KVM changes for 6.6:
- Wrap kvm_{gfn,hva}_range.pte in a union to allow mmu_notifier events to pass
action specific data without needing to constantly update the main handlers.
- Drop unused function declarations
- Add support for TLB range invalidation of Stage-2 page tables,
avoiding unnecessary invalidations. Systems that do not implement
range invalidation still rely on a full invalidation when dealing
with large ranges.
- Add infrastructure for forwarding traps taken from a L2 guest to
the L1 guest, with L0 acting as the dispatcher, another baby step
towards the full nested support.
- Simplify the way we deal with the (long deprecated) 'CPU target',
resulting in a much needed cleanup.
- Fix another set of PMU bugs, both on the guest and host sides,
as we seem to never have any shortage of those...
- Relax the alignment requirements of EL2 VA allocations for
non-stack allocations, as we were otherwise wasting a lot of that
precious VA space.
- The usual set of non-functional cleanups, although I note the lack
of spelling fixes...
-----BEGIN PGP SIGNATURE-----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=DKhx
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for Linux 6.6
- Add support for TLB range invalidation of Stage-2 page tables,
avoiding unnecessary invalidations. Systems that do not implement
range invalidation still rely on a full invalidation when dealing
with large ranges.
- Add infrastructure for forwarding traps taken from a L2 guest to
the L1 guest, with L0 acting as the dispatcher, another baby step
towards the full nested support.
- Simplify the way we deal with the (long deprecated) 'CPU target',
resulting in a much needed cleanup.
- Fix another set of PMU bugs, both on the guest and host sides,
as we seem to never have any shortage of those...
- Relax the alignment requirements of EL2 VA allocations for
non-stack allocations, as we were otherwise wasting a lot of that
precious VA space.
- The usual set of non-functional cleanups, although I note the lack
of spelling fixes...
- VFIO direct character device (cdev) interface support. This extracts
the vfio device fd from the container and group model, and is intended
to be the native uAPI for use with IOMMUFD. (Yi Liu)
- Enhancements to the PCI hot reset interface in support of cdev usage.
(Yi Liu)
- Fix a potential race between registering and unregistering vfio files
in the kvm-vfio interface and extend use of a lock to avoid extra
drop and acquires. (Dmitry Torokhov)
- A new vfio-pci variant driver for the AMD/Pensando Distributed Services
Card (PDS) Ethernet device, supporting live migration. (Brett Creeley)
- Cleanups to remove redundant owner setup in cdx and fsl bus drivers,
and simplify driver init/exit in fsl code. (Li Zetao)
- Fix uninitialized hole in data structure and pad capability structures
for alignment. (Stefan Hajnoczi)
-----BEGIN PGP SIGNATURE-----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=eKSR
-----END PGP SIGNATURE-----
Merge tag 'vfio-v6.6-rc1' of https://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- VFIO direct character device (cdev) interface support. This extracts
the vfio device fd from the container and group model, and is
intended to be the native uAPI for use with IOMMUFD (Yi Liu)
- Enhancements to the PCI hot reset interface in support of cdev usage
(Yi Liu)
- Fix a potential race between registering and unregistering vfio files
in the kvm-vfio interface and extend use of a lock to avoid extra
drop and acquires (Dmitry Torokhov)
- A new vfio-pci variant driver for the AMD/Pensando Distributed
Services Card (PDS) Ethernet device, supporting live migration (Brett
Creeley)
- Cleanups to remove redundant owner setup in cdx and fsl bus drivers,
and simplify driver init/exit in fsl code (Li Zetao)
- Fix uninitialized hole in data structure and pad capability
structures for alignment (Stefan Hajnoczi)
* tag 'vfio-v6.6-rc1' of https://github.com/awilliam/linux-vfio: (53 commits)
vfio/pds: Send type for SUSPEND_STATUS command
vfio/pds: fix return value in pds_vfio_get_lm_file()
pds_core: Fix function header descriptions
vfio: align capability structures
vfio/type1: fix cap_migration information leak
vfio/fsl-mc: Use module_fsl_mc_driver macro to simplify the code
vfio/cdx: Remove redundant initialization owner in vfio_cdx_driver
vfio/pds: Add Kconfig and documentation
vfio/pds: Add support for firmware recovery
vfio/pds: Add support for dirty page tracking
vfio/pds: Add VFIO live migration support
vfio/pds: register with the pds_core PF
pds_core: Require callers of register/unregister to pass PF drvdata
vfio/pds: Initial support for pds VFIO driver
vfio: Commonize combine_ranges for use in other VFIO drivers
kvm/vfio: avoid bouncing the mutex when adding and deleting groups
kvm/vfio: ensure kvg instance stays around in kvm_vfio_group_add()
docs: vfio: Add vfio device cdev description
vfio: Compile vfio_group infrastructure optionally
vfio: Move the IOMMU_CAP_CACHE_COHERENCY check in __vfio_register_dev()
...
KVM is *the* case we know that really wants to honor NUMA hinting falls.
As we want to stop setting FOLL_HONOR_NUMA_FAULT implicitly, set
FOLL_HONOR_NUMA_FAULT whenever we might obtain pages on behalf of a VCPU
to map them into a secondary MMU, and add a comment why.
Do that unconditionally in hva_to_pfn_slow() when calling
get_user_pages_unlocked().
kvmppc_book3s_instantiate_page(), hva_to_pfn_fast() and
gfn_to_page_many_atomic() are similarly used to map pages into a
secondary MMU. However, FOLL_WRITE and get_user_page_fast_only() always
implicitly honor NUMA hinting faults -- as documented for
FOLL_HONOR_NUMA_FAULT -- so we can limit this change to a single location
for now.
Don't set it in check_user_page_hwpoison(), where we really only want to
check if the mapped page is HW-poisoned.
We won't set it for other KVM users of get_user_pages()/pin_user_pages()
* arch/powerpc/kvm/book3s_64_mmu_hv.c: not used to map pages into a
secondary MMU.
* arch/powerpc/kvm/e500_mmu.c: only used on shared TLB pages with userspace
* arch/s390/kvm/*: s390x only supports a single NUMA node either way
* arch/x86/kvm/svm/sev.c: not used to map pages into a secondary MMU.
This is a preparation for making FOLL_HONOR_NUMA_FAULT no longer
implicitly be set by get_user_pages() and friends.
Link: https://lkml.kernel.org/r/20230803143208.383663-4-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: liubo <liubo254@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Wrap kvm_{gfn,hva}_range.pte in a union so that future notifier events can
pass event specific information up and down the stack without needing to
constantly expand and churn the APIs. Lockless aging of SPTEs will pass
around a bitmap, and support for memory attributes will pass around the
new attributes for the range.
Add a "KVM_NO_ARG" placeholder to simplify handling events without an
argument (creating a dummy union variable is midly annoying).
Opportunstically drop explicit zero-initialization of the "pte" field, as
omitting the field (now a union) has the same effect.
Cc: Yu Zhao <yuzhao@google.com>
Link: https://lore.kernel.org/all/CAOUHufagkd2Jk3_HrVoFFptRXM=hX2CV8f+M-dka-hJU4bP8kw@mail.gmail.com
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Yu Zhao <yuzhao@google.com>
Link: https://lore.kernel.org/r/20230729004144.1054885-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Move kvm_arch_flush_remote_tlbs_memslot() to common code and drop
"arch_" from the name. kvm_arch_flush_remote_tlbs_memslot() is just a
range-based TLB invalidation where the range is defined by the memslot.
Now that kvm_flush_remote_tlbs_range() can be called from common code we
can just use that and drop a bunch of duplicate code from the arch
directories.
Note this adds a lockdep assertion for slots_lock being held when
calling kvm_flush_remote_tlbs_memslot(), which was previously only
asserted on x86. MIPS has calls to kvm_flush_remote_tlbs_memslot(),
but they all hold the slots_lock, so the lockdep assertion continues to
hold true.
Also drop the CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT ifdef gating
kvm_flush_remote_tlbs_memslot(), since it is no longer necessary.
Signed-off-by: David Matlack <dmatlack@google.com>
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Acked-by: Anup Patel <anup@brainfault.org>
Acked-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230811045127.3308641-7-rananta@google.com
Make kvm_flush_remote_tlbs_range() visible in common code and create a
default implementation that just invalidates the whole TLB.
This paves the way for several future features/cleanups:
- Introduction of range-based TLBI on ARM.
- Eliminating kvm_arch_flush_remote_tlbs_memslot()
- Moving the KVM/x86 TDP MMU to common code.
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Acked-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230811045127.3308641-6-rananta@google.com
kvm_arch_flush_remote_tlbs() or CONFIG_HAVE_KVM_ARCH_TLB_FLUSH_ALL
are two mechanisms to solve the same problem, allowing
architecture-specific code to provide a non-IPI implementation of
remote TLB flushing.
Dropping CONFIG_HAVE_KVM_ARCH_TLB_FLUSH_ALL allows KVM to standardize
all architectures on kvm_arch_flush_remote_tlbs() instead of
maintaining two mechanisms.
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230811045127.3308641-5-rananta@google.com
Rename kvm_arch_flush_remote_tlb() and the associated macro
__KVM_HAVE_ARCH_FLUSH_REMOTE_TLB to kvm_arch_flush_remote_tlbs() and
__KVM_HAVE_ARCH_FLUSH_REMOTE_TLBS respectively.
Making the name plural matches kvm_flush_remote_tlbs() and makes it more
clear that this function can affect more than one remote TLB.
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Acked-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230811045127.3308641-2-rananta@google.com
Stop taking kv->lock mutex in kvm_vfio_update_coherency() and instead
call it with this mutex held: the callers of the function usually
already have it taken (and released) before calling
kvm_vfio_update_coherency(). This avoid bouncing the lock up and down.
The exception is kvm_vfio_release() where we do not take the lock, but
it is being executed when the very last reference to kvm_device is being
dropped, so there are no concerns about concurrency.
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20230714224538.404793-2-dmitry.torokhov@gmail.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
kvm_vfio_group_add() creates kvg instance, links it to kv->group_list,
and calls kvm_vfio_file_set_kvm() with kvg->file as an argument after
dropping kv->lock. If we race group addition and deletion calls, kvg
instance may get freed by the time we get around to calling
kvm_vfio_file_set_kvm().
Previous iterations of the code did not reference kvg->file outside of
the critical section, but used a temporary variable. Still, they had
similar problem of the file reference being owned by kvg structure and
potential for kvm_vfio_group_del() dropping it before
kvm_vfio_group_add() had a chance to complete.
Fix this by moving call to kvm_vfio_file_set_kvm() under the protection
of kv->lock. We already call it while holding the same lock when vfio
group is being deleted, so it should be safe here as well.
Fixes: 2fc1bec158 ("kvm: set/clear kvm to/from vfio_group when group add/delete")
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20230714224538.404793-1-dmitry.torokhov@gmail.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Grab a reference to KVM prior to installing VM and vCPU stats file
descriptors to ensure the underlying VM and vCPU objects are not freed
until the last reference to any and all stats fds are dropped.
Note, the stats paths manually invoke fd_install() and so don't need to
grab a reference before creating the file.
Fixes: ce55c04945 ("KVM: stats: Support binary stats retrieval for a VCPU")
Fixes: fcfe1baedd ("KVM: stats: Support binary stats retrieval for a VM")
Reported-by: Zheng Zhang <zheng.zhang@email.ucr.edu>
Closes: https://lore.kernel.org/all/CAC_GQSr3xzZaeZt85k_RCBd5kfiOve8qXo7a81Cq53LuVQ5r=Q@mail.gmail.com
Cc: stable@vger.kernel.org
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Message-Id: <20230711230131.648752-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This defines KVM_DEV_VFIO_FILE* and make alias with KVM_DEV_VFIO_GROUP*.
Old userspace uses KVM_DEV_VFIO_GROUP* works as well.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718135551.6592-6-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This renames kvm_vfio_group related helpers to prepare for accepting
vfio device fd. No functional change is intended.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718135551.6592-5-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This prepares for making the below kAPIs to accept both group file
and device file instead of only vfio group file.
bool vfio_file_enforced_coherent(struct file *file);
void vfio_file_set_kvm(struct file *file, struct kvm *kvm);
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718135551.6592-3-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
* Eager page splitting optimization for dirty logging, optionally
allowing for a VM to avoid the cost of hugepage splitting in the stage-2
fault path.
* Arm FF-A proxy for pKVM, allowing a pKVM host to safely interact with
services that live in the Secure world. pKVM intervenes on FF-A calls
to guarantee the host doesn't misuse memory donated to the hyp or a
pKVM guest.
* Support for running the split hypervisor with VHE enabled, known as
'hVHE' mode. This is extremely useful for testing the split
hypervisor on VHE-only systems, and paves the way for new use cases
that depend on having two TTBRs available at EL2.
* Generalized framework for configurable ID registers from userspace.
KVM/arm64 currently prevents arbitrary CPU feature set configuration
from userspace, but the intent is to relax this limitation and allow
userspace to select a feature set consistent with the CPU.
* Enable the use of Branch Target Identification (FEAT_BTI) in the
hypervisor.
* Use a separate set of pointer authentication keys for the hypervisor
when running in protected mode, as the host is untrusted at runtime.
* Ensure timer IRQs are consistently released in the init failure
paths.
* Avoid trapping CTR_EL0 on systems with Enhanced Virtualization Traps
(FEAT_EVT), as it is a register commonly read from userspace.
* Erratum workaround for the upcoming AmpereOne part, which has broken
hardware A/D state management.
RISC-V:
* Redirect AMO load/store misaligned traps to KVM guest
* Trap-n-emulate AIA in-kernel irqchip for KVM guest
* Svnapot support for KVM Guest
s390:
* New uvdevice secret API
* CMM selftest and fixes
* fix racy access to target CPU for diag 9c
x86:
* Fix missing/incorrect #GP checks on ENCLS
* Use standard mmu_notifier hooks for handling APIC access page
* Drop now unnecessary TR/TSS load after VM-Exit on AMD
* Print more descriptive information about the status of SEV and SEV-ES during
module load
* Add a test for splitting and reconstituting hugepages during and after
dirty logging
* Add support for CPU pinning in demand paging test
* Add support for AMD PerfMonV2, with a variety of cleanups and minor fixes
included along the way
* Add a "nx_huge_pages=never" option to effectively avoid creating NX hugepage
recovery threads (because nx_huge_pages=off can be toggled at runtime)
* Move handling of PAT out of MTRR code and dedup SVM+VMX code
* Fix output of PIC poll command emulation when there's an interrupt
* Add a maintainer's handbook to document KVM x86 processes, preferred coding
style, testing expectations, etc.
* Misc cleanups, fixes and comments
Generic:
* Miscellaneous bugfixes and cleanups
Selftests:
* Generate dependency files so that partial rebuilds work as expected
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmSgHrIUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroORcAf+KkBlXwQMf+Q0Hy6Mfe0OtkKmh0Ae
6HJ6dsuMfOHhWv5kgukh+qvuGUGzHq+gpVKmZg2yP3h3cLHOLUAYMCDm+rjXyjsk
F4DbnJLfxq43Pe9PHRKFxxSecRcRYCNox0GD5UYL4PLKcH0FyfQrV+HVBK+GI8L3
FDzUcyJkR12Lcj1qf++7fsbzfOshL0AJPmidQCoc6wkLJpUEr/nYUqlI1Kx3YNuQ
LKmxFHS4l4/O/px3GKNDrLWDbrVlwciGIa3GZLS52PZdW3mAqT+cqcPcYK6SW71P
m1vE80VbNELX5q3YSRoOXtedoZ3Pk97LEmz/xQAsJ/jri0Z5Syk0Ok0m/Q==
=AMXp
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM64:
- Eager page splitting optimization for dirty logging, optionally
allowing for a VM to avoid the cost of hugepage splitting in the
stage-2 fault path.
- Arm FF-A proxy for pKVM, allowing a pKVM host to safely interact
with services that live in the Secure world. pKVM intervenes on
FF-A calls to guarantee the host doesn't misuse memory donated to
the hyp or a pKVM guest.
- Support for running the split hypervisor with VHE enabled, known as
'hVHE' mode. This is extremely useful for testing the split
hypervisor on VHE-only systems, and paves the way for new use cases
that depend on having two TTBRs available at EL2.
- Generalized framework for configurable ID registers from userspace.
KVM/arm64 currently prevents arbitrary CPU feature set
configuration from userspace, but the intent is to relax this
limitation and allow userspace to select a feature set consistent
with the CPU.
- Enable the use of Branch Target Identification (FEAT_BTI) in the
hypervisor.
- Use a separate set of pointer authentication keys for the
hypervisor when running in protected mode, as the host is untrusted
at runtime.
- Ensure timer IRQs are consistently released in the init failure
paths.
- Avoid trapping CTR_EL0 on systems with Enhanced Virtualization
Traps (FEAT_EVT), as it is a register commonly read from userspace.
- Erratum workaround for the upcoming AmpereOne part, which has
broken hardware A/D state management.
RISC-V:
- Redirect AMO load/store misaligned traps to KVM guest
- Trap-n-emulate AIA in-kernel irqchip for KVM guest
- Svnapot support for KVM Guest
s390:
- New uvdevice secret API
- CMM selftest and fixes
- fix racy access to target CPU for diag 9c
x86:
- Fix missing/incorrect #GP checks on ENCLS
- Use standard mmu_notifier hooks for handling APIC access page
- Drop now unnecessary TR/TSS load after VM-Exit on AMD
- Print more descriptive information about the status of SEV and
SEV-ES during module load
- Add a test for splitting and reconstituting hugepages during and
after dirty logging
- Add support for CPU pinning in demand paging test
- Add support for AMD PerfMonV2, with a variety of cleanups and minor
fixes included along the way
- Add a "nx_huge_pages=never" option to effectively avoid creating NX
hugepage recovery threads (because nx_huge_pages=off can be toggled
at runtime)
- Move handling of PAT out of MTRR code and dedup SVM+VMX code
- Fix output of PIC poll command emulation when there's an interrupt
- Add a maintainer's handbook to document KVM x86 processes,
preferred coding style, testing expectations, etc.
- Misc cleanups, fixes and comments
Generic:
- Miscellaneous bugfixes and cleanups
Selftests:
- Generate dependency files so that partial rebuilds work as
expected"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (153 commits)
Documentation/process: Add a maintainer handbook for KVM x86
Documentation/process: Add a label for the tip tree handbook's coding style
KVM: arm64: Fix misuse of KVM_ARM_VCPU_POWER_OFF bit index
RISC-V: KVM: Remove unneeded semicolon
RISC-V: KVM: Allow Svnapot extension for Guest/VM
riscv: kvm: define vcpu_sbi_ext_pmu in header
RISC-V: KVM: Expose IMSIC registers as attributes of AIA irqchip
RISC-V: KVM: Add in-kernel virtualization of AIA IMSIC
RISC-V: KVM: Expose APLIC registers as attributes of AIA irqchip
RISC-V: KVM: Add in-kernel emulation of AIA APLIC
RISC-V: KVM: Implement device interface for AIA irqchip
RISC-V: KVM: Skeletal in-kernel AIA irqchip support
RISC-V: KVM: Set kvm_riscv_aia_nr_hgei to zero
RISC-V: KVM: Add APLIC related defines
RISC-V: KVM: Add IMSIC related defines
RISC-V: KVM: Implement guest external interrupt line management
KVM: x86: Remove PRIx* definitions as they are solely for user space
s390/uv: Update query for secret-UVCs
s390/uv: replace scnprintf with sysfs_emit
s390/uvdevice: Add 'Lock Secret Store' UVC
...
- Fix unprotected vcpu->pid dereference via debugfs
- Fix KVM_BUG() and KVM_BUG_ON() macros with 64-bit conditionals
- Refactor failure path in kvm_io_bus_unregister_dev() to simplify the code
- Misc cleanups
-----BEGIN PGP SIGNATURE-----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=EGXd
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-generic-6.5' of https://github.com/kvm-x86/linux into HEAD
Common KVM changes for 6.5:
- Fix unprotected vcpu->pid dereference via debugfs
- Fix KVM_BUG() and KVM_BUG_ON() macros with 64-bit conditionals
- Refactor failure path in kvm_io_bus_unregister_dev() to simplify the code
- Misc cleanups
- Eager page splitting optimization for dirty logging, optionally
allowing for a VM to avoid the cost of block splitting in the stage-2
fault path.
- Arm FF-A proxy for pKVM, allowing a pKVM host to safely interact with
services that live in the Secure world. pKVM intervenes on FF-A calls
to guarantee the host doesn't misuse memory donated to the hyp or a
pKVM guest.
- Support for running the split hypervisor with VHE enabled, known as
'hVHE' mode. This is extremely useful for testing the split
hypervisor on VHE-only systems, and paves the way for new use cases
that depend on having two TTBRs available at EL2.
- Generalized framework for configurable ID registers from userspace.
KVM/arm64 currently prevents arbitrary CPU feature set configuration
from userspace, but the intent is to relax this limitation and allow
userspace to select a feature set consistent with the CPU.
- Enable the use of Branch Target Identification (FEAT_BTI) in the
hypervisor.
- Use a separate set of pointer authentication keys for the hypervisor
when running in protected mode, as the host is untrusted at runtime.
- Ensure timer IRQs are consistently released in the init failure
paths.
- Avoid trapping CTR_EL0 on systems with Enhanced Virtualization Traps
(FEAT_EVT), as it is a register commonly read from userspace.
- Erratum workaround for the upcoming AmpereOne part, which has broken
hardware A/D state management.
As a consequence of the hVHE series reworking the arm64 software
features framework, the for-next/module-alloc branch from the arm64 tree
comes along for the ride.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSNXHjWXuzMZutrKNKivnWIJHzdFgUCZJWrhwAKCRCivnWIJHzd
Fs07AP9xliv5yIoQtRgPZXc0QDPyUm7zg8f5KDgqCVJtyHXcvAEAmmerBr39nbPc
XoMXALKx6NGt836P0C+bhvRcHdFPGwE=
=c/Xh
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 6.5
- Eager page splitting optimization for dirty logging, optionally
allowing for a VM to avoid the cost of block splitting in the stage-2
fault path.
- Arm FF-A proxy for pKVM, allowing a pKVM host to safely interact with
services that live in the Secure world. pKVM intervenes on FF-A calls
to guarantee the host doesn't misuse memory donated to the hyp or a
pKVM guest.
- Support for running the split hypervisor with VHE enabled, known as
'hVHE' mode. This is extremely useful for testing the split
hypervisor on VHE-only systems, and paves the way for new use cases
that depend on having two TTBRs available at EL2.
- Generalized framework for configurable ID registers from userspace.
KVM/arm64 currently prevents arbitrary CPU feature set configuration
from userspace, but the intent is to relax this limitation and allow
userspace to select a feature set consistent with the CPU.
- Enable the use of Branch Target Identification (FEAT_BTI) in the
hypervisor.
- Use a separate set of pointer authentication keys for the hypervisor
when running in protected mode, as the host is untrusted at runtime.
- Ensure timer IRQs are consistently released in the init failure
paths.
- Avoid trapping CTR_EL0 on systems with Enhanced Virtualization Traps
(FEAT_EVT), as it is a register commonly read from userspace.
- Erratum workaround for the upcoming AmpereOne part, which has broken
hardware A/D state management.
As a consequence of the hVHE series reworking the arm64 software
features framework, the for-next/module-alloc branch from the arm64 tree
comes along for the ride.
- Yosry has also eliminated cgroup's atomic rstat flushing.
- Nhat Pham adds the new cachestat() syscall. It provides userspace
with the ability to query pagecache status - a similar concept to
mincore() but more powerful and with improved usability.
- Mel Gorman provides more optimizations for compaction, reducing the
prevalence of page rescanning.
- Lorenzo Stoakes has done some maintanance work on the get_user_pages()
interface.
- Liam Howlett continues with cleanups and maintenance work to the maple
tree code. Peng Zhang also does some work on maple tree.
- Johannes Weiner has done some cleanup work on the compaction code.
- David Hildenbrand has contributed additional selftests for
get_user_pages().
- Thomas Gleixner has contributed some maintenance and optimization work
for the vmalloc code.
- Baolin Wang has provided some compaction cleanups,
- SeongJae Park continues maintenance work on the DAMON code.
- Huang Ying has done some maintenance on the swap code's usage of
device refcounting.
- Christoph Hellwig has some cleanups for the filemap/directio code.
- Ryan Roberts provides two patch series which yield some
rationalization of the kernel's access to pte entries - use the provided
APIs rather than open-coding accesses.
- Lorenzo Stoakes has some fixes to the interaction between pagecache
and directio access to file mappings.
- John Hubbard has a series of fixes to the MM selftesting code.
- ZhangPeng continues the folio conversion campaign.
- Hugh Dickins has been working on the pagetable handling code, mainly
with a view to reducing the load on the mmap_lock.
- Catalin Marinas has reduced the arm64 kmalloc() minimum alignment from
128 to 8.
- Domenico Cerasuolo has improved the zswap reclaim mechanism by
reorganizing the LRU management.
- Matthew Wilcox provides some fixups to make gfs2 work better with the
buffer_head code.
- Vishal Moola also has done some folio conversion work.
- Matthew Wilcox has removed the remnants of the pagevec code - their
functionality is migrated over to struct folio_batch.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZJejewAKCRDdBJ7gKXxA
joggAPwKMfT9lvDBEUnJagY7dbDPky1cSYZdJKxxM2cApGa42gEA6Cl8HRAWqSOh
J0qXCzqaaN8+BuEyLGDVPaXur9KirwY=
=B7yQ
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull mm updates from Andrew Morton:
- Yosry Ahmed brought back some cgroup v1 stats in OOM logs
- Yosry has also eliminated cgroup's atomic rstat flushing
- Nhat Pham adds the new cachestat() syscall. It provides userspace
with the ability to query pagecache status - a similar concept to
mincore() but more powerful and with improved usability
- Mel Gorman provides more optimizations for compaction, reducing the
prevalence of page rescanning
- Lorenzo Stoakes has done some maintanance work on the
get_user_pages() interface
- Liam Howlett continues with cleanups and maintenance work to the
maple tree code. Peng Zhang also does some work on maple tree
- Johannes Weiner has done some cleanup work on the compaction code
- David Hildenbrand has contributed additional selftests for
get_user_pages()
- Thomas Gleixner has contributed some maintenance and optimization
work for the vmalloc code
- Baolin Wang has provided some compaction cleanups,
- SeongJae Park continues maintenance work on the DAMON code
- Huang Ying has done some maintenance on the swap code's usage of
device refcounting
- Christoph Hellwig has some cleanups for the filemap/directio code
- Ryan Roberts provides two patch series which yield some
rationalization of the kernel's access to pte entries - use the
provided APIs rather than open-coding accesses
- Lorenzo Stoakes has some fixes to the interaction between pagecache
and directio access to file mappings
- John Hubbard has a series of fixes to the MM selftesting code
- ZhangPeng continues the folio conversion campaign
- Hugh Dickins has been working on the pagetable handling code, mainly
with a view to reducing the load on the mmap_lock
- Catalin Marinas has reduced the arm64 kmalloc() minimum alignment
from 128 to 8
- Domenico Cerasuolo has improved the zswap reclaim mechanism by
reorganizing the LRU management
- Matthew Wilcox provides some fixups to make gfs2 work better with the
buffer_head code
- Vishal Moola also has done some folio conversion work
- Matthew Wilcox has removed the remnants of the pagevec code - their
functionality is migrated over to struct folio_batch
* tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (380 commits)
mm/hugetlb: remove hugetlb_set_page_subpool()
mm: nommu: correct the range of mmap_sem_read_lock in task_mem()
hugetlb: revert use of page_cache_next_miss()
Revert "page cache: fix page_cache_next/prev_miss off by one"
mm/vmscan: fix root proactive reclaim unthrottling unbalanced node
mm: memcg: rename and document global_reclaim()
mm: kill [add|del]_page_to_lru_list()
mm: compaction: convert to use a folio in isolate_migratepages_block()
mm: zswap: fix double invalidate with exclusive loads
mm: remove unnecessary pagevec includes
mm: remove references to pagevec
mm: rename invalidate_mapping_pagevec to mapping_try_invalidate
mm: remove struct pagevec
net: convert sunrpc from pagevec to folio_batch
i915: convert i915_gpu_error to use a folio_batch
pagevec: rename fbatch_count()
mm: remove check_move_unevictable_pages()
drm: convert drm_gem_put_pages() to use a folio_batch
i915: convert shmem_sg_free_table() to use a folio_batch
scatterlist: add sg_set_folio()
...
We run into guest hang in edk2 firmware when KSM is kept as running on
the host. The edk2 firmware is waiting for status 0x80 from QEMU's pflash
device (TYPE_PFLASH_CFI01) during the operation of sector erasing or
buffered write. The status is returned by reading the memory region of
the pflash device and the read request should have been forwarded to QEMU
and emulated by it. Unfortunately, the read request is covered by an
illegal stage2 mapping when the guest hang issue occurs. The read request
is completed with QEMU bypassed and wrong status is fetched. The edk2
firmware runs into an infinite loop with the wrong status.
The illegal stage2 mapping is populated due to same page sharing by KSM
at (C) even the associated memory slot has been marked as invalid at (B)
when the memory slot is requested to be deleted. It's notable that the
active and inactive memory slots can't be swapped when we're in the middle
of kvm_mmu_notifier_change_pte() because kvm->mn_active_invalidate_count
is elevated, and kvm_swap_active_memslots() will busy loop until it reaches
to zero again. Besides, the swapping from the active to the inactive memory
slots is also avoided by holding &kvm->srcu in __kvm_handle_hva_range(),
corresponding to synchronize_srcu_expedited() in kvm_swap_active_memslots().
CPU-A CPU-B
----- -----
ioctl(kvm_fd, KVM_SET_USER_MEMORY_REGION)
kvm_vm_ioctl_set_memory_region
kvm_set_memory_region
__kvm_set_memory_region
kvm_set_memslot(kvm, old, NULL, KVM_MR_DELETE)
kvm_invalidate_memslot
kvm_copy_memslot
kvm_replace_memslot
kvm_swap_active_memslots (A)
kvm_arch_flush_shadow_memslot (B)
same page sharing by KSM
kvm_mmu_notifier_invalidate_range_start
:
kvm_mmu_notifier_change_pte
kvm_handle_hva_range
__kvm_handle_hva_range
kvm_set_spte_gfn (C)
:
kvm_mmu_notifier_invalidate_range_end
Fix the issue by skipping the invalid memory slot at (C) to avoid the
illegal stage2 mapping so that the read request for the pflash's status
is forwarded to QEMU and emulated by it. In this way, the correct pflash's
status can be returned from QEMU to break the infinite loop in the edk2
firmware.
We tried a git-bisect and the first problematic commit is cd4c718352 ("
KVM: arm64: Convert to the gfn-based MMU notifier callbacks"). With this,
clean_dcache_guest_page() is called after the memory slots are iterated
in kvm_mmu_notifier_change_pte(). clean_dcache_guest_page() is called
before the iteration on the memory slots before this commit. This change
literally enlarges the racy window between kvm_mmu_notifier_change_pte()
and memory slot removal so that we're able to reproduce the issue in a
practical test case. However, the issue exists since commit d5d8184d35
("KVM: ARM: Memory virtualization setup").
Cc: stable@vger.kernel.org # v3.9+
Fixes: d5d8184d35 ("KVM: ARM: Memory virtualization setup")
Reported-by: Shuai Hu <hshuai@redhat.com>
Reported-by: Zhenyu Zhang <zhenyzha@redhat.com>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Message-Id: <20230615054259.14911-1-gshan@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert all instances of direct pte_t* dereferencing to instead use
ptep_get() helper. This means that by default, the accesses change from a
C dereference to a READ_ONCE(). This is technically the correct thing to
do since where pgtables are modified by HW (for access/dirty) they are
volatile and therefore we should always ensure READ_ONCE() semantics.
But more importantly, by always using the helper, it can be overridden by
the architecture to fully encapsulate the contents of the pte. Arch code
is deliberately not converted, as the arch code knows best. It is
intended that arch code (arm64) will override the default with its own
implementation that can (e.g.) hide certain bits from the core code, or
determine young/dirty status by mixing in state from another source.
Conversion was done using Coccinelle:
----
// $ make coccicheck \
// COCCI=ptepget.cocci \
// SPFLAGS="--include-headers" \
// MODE=patch
virtual patch
@ depends on patch @
pte_t *v;
@@
- *v
+ ptep_get(v)
----
Then reviewed and hand-edited to avoid multiple unnecessary calls to
ptep_get(), instead opting to store the result of a single call in a
variable, where it is correct to do so. This aims to negate any cost of
READ_ONCE() and will benefit arch-overrides that may be more complex.
Included is a fix for an issue in an earlier version of this patch that
was pointed out by kernel test robot. The issue arose because config
MMU=n elides definition of the ptep helper functions, including
ptep_get(). HUGETLB_PAGE=n configs still define a simple
huge_ptep_clear_flush() for linking purposes, which dereferences the ptep.
So when both configs are disabled, this caused a build error because
ptep_get() is not defined. Fix by continuing to do a direct dereference
when MMU=n. This is safe because for this config the arch code cannot be
trying to virtualize the ptes because none of the ptep helpers are
defined.
Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: SeongJae Park <sj@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
* kvm-arm64/eager-page-splitting:
: Eager Page Splitting, courtesy of Ricardo Koller.
:
: Dirty logging performance is dominated by the cost of splitting
: hugepages to PTE granularity. On systems that mere mortals can get their
: hands on, each fault incurs the cost of a full break-before-make
: pattern, wherein the broadcast invalidation and ensuing serialization
: significantly increases fault latency.
:
: The goal of eager page splitting is to move the cost of hugepage
: splitting out of the stage-2 fault path and instead into the ioctls
: responsible for managing the dirty log:
:
: - If manual protection is enabled for the VM, hugepage splitting
: happens in the KVM_CLEAR_DIRTY_LOG ioctl. This is desirable as it
: provides userspace granular control over hugepage splitting.
:
: - Otherwise, if userspace relies on the legacy dirty log behavior
: (clear on collection), hugepage splitting is done at the moment dirty
: logging is enabled for a particular memslot.
:
: Support for eager page splitting requires explicit opt-in from
: userspace, which is realized through the
: KVM_CAP_ARM_EAGER_SPLIT_CHUNK_SIZE capability.
arm64: kvm: avoid overflow in integer division
KVM: arm64: Use local TLBI on permission relaxation
KVM: arm64: Split huge pages during KVM_CLEAR_DIRTY_LOG
KVM: arm64: Open-code kvm_mmu_write_protect_pt_masked()
KVM: arm64: Split huge pages when dirty logging is enabled
KVM: arm64: Add kvm_uninit_stage2_mmu()
KVM: arm64: Refactor kvm_arch_commit_memory_region()
KVM: arm64: Add kvm_pgtable_stage2_split()
KVM: arm64: Add KVM_CAP_ARM_EAGER_SPLIT_CHUNK_SIZE
KVM: arm64: Export kvm_are_all_memslots_empty()
KVM: arm64: Add helper for creating unlinked stage2 subtrees
KVM: arm64: Add KVM_PGTABLE_WALK flags for skipping CMOs and BBM TLBIs
KVM: arm64: Rename free_removed to free_unlinked
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Simpify kvm_deassign_ioeventfd_idx to use list_for_each_entry as the
loop just ends at the entry that's found and deleted.
Note, coalesced_mmio_ops and ioeventfd_ops are the only instances of
kvm_io_device_ops that implement a destructor, all other callers of
kvm_io_bus_unregister_dev() are unaffected by this change.
Suggested-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20230207123713.3905-3-wei.w.wang@intel.com
[sean: call out that only select users implement a destructor]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Current usage of kvm_io_device requires users to destruct it with an extra
call of kvm_iodevice_destructor after the device gets unregistered from
kvm_io_bus. This is not necessary and can cause errors if a user forgot
to make the extra call.
Simplify the usage by combining kvm_iodevice_destructor into
kvm_io_bus_unregister_dev. This reduces LOCs a bit for users and can
avoid the leakage of destructing the device explicitly.
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20230207123713.3905-2-wei.w.wang@intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
The only instances of get_user_pages_remote() invocations which used the
vmas parameter were for a single page which can instead simply look up the
VMA directly. In particular:-
- __update_ref_ctr() looked up the VMA but did nothing with it so we simply
remove it.
- __access_remote_vm() was already using vma_lookup() when the original
lookup failed so by doing the lookup directly this also de-duplicates the
code.
We are able to perform these VMA operations as we already hold the
mmap_lock in order to be able to call get_user_pages_remote().
As part of this work we add get_user_page_vma_remote() which abstracts the
VMA lookup, error handling and decrementing the page reference count should
the VMA lookup fail.
This forms part of a broader set of patches intended to eliminate the vmas
parameter altogether.
[akpm@linux-foundation.org: avoid passing NULL to PTR_ERR]
Link: https://lkml.kernel.org/r/d20128c849ecdbf4dd01cc828fcec32127ed939a.1684350871.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> (for arm64)
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com> (for s390)
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Christian König <christian.koenig@amd.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Sean Christopherson <seanjc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "remove the vmas parameter from GUP APIs", v6.
(pin_/get)_user_pages[_remote]() each provide an optional output parameter
for an array of VMA objects associated with each page in the input range.
These provide the means for VMAs to be returned, as long as mm->mmap_lock
is never released during the GUP operation (i.e. the internal flag
FOLL_UNLOCKABLE is not specified).
In addition, these VMAs can only be accessed with the mmap_lock held and
become invalidated the moment it is released.
The vast majority of invocations do not use this functionality and of
those that do, all but one case retrieve a single VMA to perform checks
upon.
It is not egregious in the single VMA cases to simply replace the
operation with a vma_lookup(). In these cases we duplicate the (fast)
lookup on a slow path already under the mmap_lock, abstracted to a new
get_user_page_vma_remote() inline helper function which also performs
error checking and reference count maintenance.
The special case is io_uring, where io_pin_pages() specifically needs to
assert that the VMAs underlying the range do not result in broken
long-term GUP file-backed mappings.
As GUP now internally asserts that FOLL_LONGTERM mappings are not
file-backed in a broken fashion (i.e. requiring dirty tracking) - as
implemented in "mm/gup: disallow FOLL_LONGTERM GUP-nonfast writing to
file-backed mappings" - this logic is no longer required and so we can
simply remove it altogether from io_uring.
Eliminating the vmas parameter eliminates an entire class of danging
pointer errors that might have occured should the lock have been
incorrectly released.
In addition, the API is simplified and now clearly expresses what it is
intended for - applying the specified GUP flags and (if pinning) returning
pinned pages.
This change additionally opens the door to further potential improvements
in GUP and the possible marrying of disparate code paths.
I have run this series against gup_test with no issues.
Thanks to Matthew Wilcox for suggesting this refactoring!
This patch (of 6):
No invocation of get_user_pages() use the vmas parameter, so remove it.
The GUP API is confusing and caveated. Recent changes have done much to
improve that, however there is more we can do. Exporting vmas is a prime
target as the caller has to be extremely careful to preclude their use
after the mmap_lock has expired or otherwise be left with dangling
pointers.
Removing the vmas parameter focuses the GUP functions upon their primary
purpose - pinning (and outputting) pages as well as performing the actions
implied by the input flags.
This is part of a patch series aiming to remove the vmas parameter
altogether.
Link: https://lkml.kernel.org/r/cover.1684350871.git.lstoakes@gmail.com
Link: https://lkml.kernel.org/r/589e0c64794668ffc799651e8d85e703262b1e9d.1684350871.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Suggested-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Christian König <christian.koenig@amd.com> (for radeon parts)
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Sean Christopherson <seanjc@google.com> (KVM)
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Since c9d6015486 ("KVM: allow KVM_BUG/KVM_BUG_ON to handle 64-bit cond")
'cond' is internally converted to boolean, so caller's explicit conversion
from void* is unnecessary.
Remove the double bang.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Yuan Yao <yuan.yao@intel.com>
base-commit: 76a17bf03a268bc342e08c05d8ddbe607d294eb4
Link: https://lore.kernel.org/r/20230605114852.288964-1-mhal@rbox.co
Signed-off-by: Sean Christopherson <seanjc@google.com>
Now that KVM honors past and in-progress mmu_notifier invalidations when
reloading the APIC-access page, use KVM's "standard" invalidation hooks
to trigger a reload and delete the one-off usage of invalidate_range().
Aside from eliminating one-off code in KVM, dropping KVM's use of
invalidate_range() will allow common mmu_notifier to redefine the API to
be more strictly focused on invalidating secondary TLBs that share the
primary MMU's page tables.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20230602011518.787006-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
On kzalloc() failure, taking the `goto fail` path leads to kfree(NULL).
Such no-op has no use. Move it out.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/20230327175457.735903-1-mhal@rbox.co
Signed-off-by: Sean Christopherson <seanjc@google.com>
Wrap the vcpu->pid dereference in the debugfs hook vcpu_get_pid() with
proper RCU read (un)lock. Unlike the code in kvm_vcpu_ioctl(),
vcpu_get_pid() is not a simple access; the pid pointer is passed to
pid_nr() and fully dereferenced if the pointer is non-NULL.
Failure to acquire RCU could result in use-after-free of the old pid if
a different task invokes KVM_RUN and puts the last reference to the old
vcpu->pid between vcpu_get_pid() reading the pointer and dereferencing it
in pid_nr().
Fixes: e36de87d34 ("KVM: debugfs: expose pid of vcpu threads")
Link: https://lore.kernel.org/r/20230211010719.982919-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
In kvm_vm_ioctl_create_vcpu(), add vcpu to vcpu_array iff it's safe to
access vcpu via kvm_get_vcpu() and kvm_for_each_vcpu(), i.e. when there's
no failure path requiring vcpu removal and destruction. Such order is
important because vcpu_array accessors may end up referencing vcpu at
vcpu_array[0] even before online_vcpus is set to 1.
When online_vcpus=0, any call to kvm_get_vcpu() goes through
array_index_nospec() and ends with an attempt to xa_load(vcpu_array, 0):
int num_vcpus = atomic_read(&kvm->online_vcpus);
i = array_index_nospec(i, num_vcpus);
return xa_load(&kvm->vcpu_array, i);
Similarly, when online_vcpus=0, a kvm_for_each_vcpu() does not iterate over
an "empty" range, but actually [0, ULONG_MAX]:
xa_for_each_range(&kvm->vcpu_array, idx, vcpup, 0, \
(atomic_read(&kvm->online_vcpus) - 1))
In both cases, such online_vcpus=0 edge case, even if leading to
unnecessary calls to XArray API, should not be an issue; requesting
unpopulated indexes/ranges is handled by xa_load() and xa_for_each_range().
However, this means that when the first vCPU is created and inserted in
vcpu_array *and* before online_vcpus is incremented, code calling
kvm_get_vcpu()/kvm_for_each_vcpu() already has access to that first vCPU.
This should not pose a problem assuming that once a vcpu is stored in
vcpu_array, it will remain there, but that's not the case:
kvm_vm_ioctl_create_vcpu() first inserts to vcpu_array, then requests a
file descriptor. If create_vcpu_fd() fails, newly inserted vcpu is removed
from the vcpu_array, then destroyed:
vcpu->vcpu_idx = atomic_read(&kvm->online_vcpus);
r = xa_insert(&kvm->vcpu_array, vcpu->vcpu_idx, vcpu, GFP_KERNEL_ACCOUNT);
kvm_get_kvm(kvm);
r = create_vcpu_fd(vcpu);
if (r < 0) {
xa_erase(&kvm->vcpu_array, vcpu->vcpu_idx);
kvm_put_kvm_no_destroy(kvm);
goto unlock_vcpu_destroy;
}
atomic_inc(&kvm->online_vcpus);
This results in a possible race condition when a reference to a vcpu is
acquired (via kvm_get_vcpu() or kvm_for_each_vcpu()) moments before said
vcpu is destroyed.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Message-Id: <20230510140410.1093987-2-mhal@rbox.co>
Cc: stable@vger.kernel.org
Fixes: c5b0775491 ("KVM: Convert the kvm->vcpus array to a xarray", 2021-12-08)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reject hardware enabling, i.e. VM creation, if a restart/shutdown has
been initiated to avoid re-enabling hardware between kvm_reboot() and
machine_{halt,power_off,restart}(). The restart case is especially
problematic (for x86) as enabling VMX (or clearing GIF in KVM_RUN on
SVM) blocks INIT, which results in the restart/reboot hanging as BIOS
is unable to wake and rendezvous with APs.
Note, this bug, and the original issue that motivated the addition of
kvm_reboot(), is effectively limited to a forced reboot, e.g. `reboot -f`.
In a "normal" reboot, userspace will gracefully teardown userspace before
triggering the kernel reboot (modulo bugs, errors, etc), i.e. any process
that might do ioctl(KVM_CREATE_VM) is long gone.
Fixes: 8e1c18157d ("KVM: VMX: Disable VMX when system shutdown")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Message-Id: <20230512233127.804012-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use syscore_ops.shutdown to disable hardware virtualization during a
reboot instead of using the dedicated reboot_notifier so that KVM disables
virtualization _after_ system_state has been updated. This will allow
fixing a race in KVM's handling of a forced reboot where KVM can end up
enabling hardware virtualization between kernel_restart_prepare() and
machine_restart().
Rename KVM's hook to match the syscore op to avoid any possible confusion
from wiring up a "reboot" helper to a "shutdown" hook (neither "shutdown
nor "reboot" is completely accurate as the hook handles both).
Opportunistically rewrite kvm_shutdown()'s comment to make it less VMX
specific, and to explain why kvm_rebooting exists.
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: James Morse <james.morse@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Zenghui Yu <yuzenghui@huawei.com>
Cc: kvmarm@lists.linux.dev
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Cc: Anup Patel <anup@brainfault.org>
Cc: Atish Patra <atishp@atishpatra.org>
Cc: kvm-riscv@lists.infradead.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Message-Id: <20230512233127.804012-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Export kvm_are_all_memslots_empty(). This will be used by a future
commit when checking before setting a capability.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Link: https://lore.kernel.org/r/20230426172330.1439644-5-ricarkol@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
* More phys_to_virt conversions
* Improvement of AP management for VSIE (nested virtualization)
ARM64:
* Numerous fixes for the pathological lock inversion issue that
plagued KVM/arm64 since... forever.
* New framework allowing SMCCC-compliant hypercalls to be forwarded
to userspace, hopefully paving the way for some more features
being moved to VMMs rather than be implemented in the kernel.
* Large rework of the timer code to allow a VM-wide offset to be
applied to both virtual and physical counters as well as a
per-timer, per-vcpu offset that complements the global one.
This last part allows the NV timer code to be implemented on
top.
* A small set of fixes to make sure that we don't change anything
affecting the EL1&0 translation regime just after having having
taken an exception to EL2 until we have executed a DSB. This
ensures that speculative walks started in EL1&0 have completed.
* The usual selftest fixes and improvements.
KVM x86 changes for 6.4:
* Optimize CR0.WP toggling by avoiding an MMU reload when TDP is enabled,
and by giving the guest control of CR0.WP when EPT is enabled on VMX
(VMX-only because SVM doesn't support per-bit controls)
* Add CR0/CR4 helpers to query single bits, and clean up related code
where KVM was interpreting kvm_read_cr4_bits()'s "unsigned long" return
as a bool
* Move AMD_PSFD to cpufeatures.h and purge KVM's definition
* Avoid unnecessary writes+flushes when the guest is only adding new PTEs
* Overhaul .sync_page() and .invlpg() to utilize .sync_page()'s optimizations
when emulating invalidations
* Clean up the range-based flushing APIs
* Revamp the TDP MMU's reaping of Accessed/Dirty bits to clear a single
A/D bit using a LOCK AND instead of XCHG, and skip all of the "handle
changed SPTE" overhead associated with writing the entire entry
* Track the number of "tail" entries in a pte_list_desc to avoid having
to walk (potentially) all descriptors during insertion and deletion,
which gets quite expensive if the guest is spamming fork()
* Disallow virtualizing legacy LBRs if architectural LBRs are available,
the two are mutually exclusive in hardware
* Disallow writes to immutable feature MSRs (notably PERF_CAPABILITIES)
after KVM_RUN, similar to CPUID features
* Overhaul the vmx_pmu_caps selftest to better validate PERF_CAPABILITIES
* Apply PMU filters to emulated events and add test coverage to the
pmu_event_filter selftest
x86 AMD:
* Add support for virtual NMIs
* Fixes for edge cases related to virtual interrupts
x86 Intel:
* Don't advertise XTILE_CFG in KVM_GET_SUPPORTED_CPUID if XTILE_DATA is
not being reported due to userspace not opting in via prctl()
* Fix a bug in emulation of ENCLS in compatibility mode
* Allow emulation of NOP and PAUSE for L2
* AMX selftests improvements
* Misc cleanups
MIPS:
* Constify MIPS's internal callbacks (a leftover from the hardware enabling
rework that landed in 6.3)
Generic:
* Drop unnecessary casts from "void *" throughout kvm_main.c
* Tweak the layout of "struct kvm_mmu_memory_cache" to shrink the struct
size by 8 bytes on 64-bit kernels by utilizing a padding hole
Documentation:
* Fix goof introduced by the conversion to rST
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmRNExkUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNyjwf+MkzDael9y9AsOZoqhEZ5OsfQYJ32
Im5ZVYsPRU2K5TuoWql6meIihgclCj1iIU32qYHa2F1WYt2rZ72rJp+HoY8b+TaI
WvF0pvNtqQyg3iEKUBKPA4xQ6mj7RpQBw86qqiCHmlfNt0zxluEGEPxH8xrWcfhC
huDQ+NUOdU7fmJ3rqGitCvkUbCuZNkw3aNPR8dhU8RAWrwRzP2hBOmdxIeo81WWY
XMEpJSijbGpXL9CvM0Jz9nOuMJwZwCCBGxg1vSQq0xTfLySNMxzvWZC2GFaBjucb
j0UOQ7yE0drIZDVhd3sdNslubXXU6FcSEzacGQb9aigMUon3Tem9SHi7Kw==
=S2Hq
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"s390:
- More phys_to_virt conversions
- Improvement of AP management for VSIE (nested virtualization)
ARM64:
- Numerous fixes for the pathological lock inversion issue that
plagued KVM/arm64 since... forever.
- New framework allowing SMCCC-compliant hypercalls to be forwarded
to userspace, hopefully paving the way for some more features being
moved to VMMs rather than be implemented in the kernel.
- Large rework of the timer code to allow a VM-wide offset to be
applied to both virtual and physical counters as well as a
per-timer, per-vcpu offset that complements the global one. This
last part allows the NV timer code to be implemented on top.
- A small set of fixes to make sure that we don't change anything
affecting the EL1&0 translation regime just after having having
taken an exception to EL2 until we have executed a DSB. This
ensures that speculative walks started in EL1&0 have completed.
- The usual selftest fixes and improvements.
x86:
- Optimize CR0.WP toggling by avoiding an MMU reload when TDP is
enabled, and by giving the guest control of CR0.WP when EPT is
enabled on VMX (VMX-only because SVM doesn't support per-bit
controls)
- Add CR0/CR4 helpers to query single bits, and clean up related code
where KVM was interpreting kvm_read_cr4_bits()'s "unsigned long"
return as a bool
- Move AMD_PSFD to cpufeatures.h and purge KVM's definition
- Avoid unnecessary writes+flushes when the guest is only adding new
PTEs
- Overhaul .sync_page() and .invlpg() to utilize .sync_page()'s
optimizations when emulating invalidations
- Clean up the range-based flushing APIs
- Revamp the TDP MMU's reaping of Accessed/Dirty bits to clear a
single A/D bit using a LOCK AND instead of XCHG, and skip all of
the "handle changed SPTE" overhead associated with writing the
entire entry
- Track the number of "tail" entries in a pte_list_desc to avoid
having to walk (potentially) all descriptors during insertion and
deletion, which gets quite expensive if the guest is spamming
fork()
- Disallow virtualizing legacy LBRs if architectural LBRs are
available, the two are mutually exclusive in hardware
- Disallow writes to immutable feature MSRs (notably
PERF_CAPABILITIES) after KVM_RUN, similar to CPUID features
- Overhaul the vmx_pmu_caps selftest to better validate
PERF_CAPABILITIES
- Apply PMU filters to emulated events and add test coverage to the
pmu_event_filter selftest
- AMD SVM:
- Add support for virtual NMIs
- Fixes for edge cases related to virtual interrupts
- Intel AMX:
- Don't advertise XTILE_CFG in KVM_GET_SUPPORTED_CPUID if
XTILE_DATA is not being reported due to userspace not opting in
via prctl()
- Fix a bug in emulation of ENCLS in compatibility mode
- Allow emulation of NOP and PAUSE for L2
- AMX selftests improvements
- Misc cleanups
MIPS:
- Constify MIPS's internal callbacks (a leftover from the hardware
enabling rework that landed in 6.3)
Generic:
- Drop unnecessary casts from "void *" throughout kvm_main.c
- Tweak the layout of "struct kvm_mmu_memory_cache" to shrink the
struct size by 8 bytes on 64-bit kernels by utilizing a padding
hole
Documentation:
- Fix goof introduced by the conversion to rST"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (211 commits)
KVM: s390: pci: fix virtual-physical confusion on module unload/load
KVM: s390: vsie: clarifications on setting the APCB
KVM: s390: interrupt: fix virtual-physical confusion for next alert GISA
KVM: arm64: Have kvm_psci_vcpu_on() use WRITE_ONCE() to update mp_state
KVM: arm64: Acquire mp_state_lock in kvm_arch_vcpu_ioctl_vcpu_init()
KVM: selftests: Test the PMU event "Instructions retired"
KVM: selftests: Copy full counter values from guest in PMU event filter test
KVM: selftests: Use error codes to signal errors in PMU event filter test
KVM: selftests: Print detailed info in PMU event filter asserts
KVM: selftests: Add helpers for PMC asserts in PMU event filter test
KVM: selftests: Add a common helper for the PMU event filter guest code
KVM: selftests: Fix spelling mistake "perrmited" -> "permitted"
KVM: arm64: vhe: Drop extra isb() on guest exit
KVM: arm64: vhe: Synchronise with page table walker on MMU update
KVM: arm64: pkvm: Document the side effects of kvm_flush_dcache_to_poc()
KVM: arm64: nvhe: Synchronise with page table walker on TLBI
KVM: arm64: Handle 32bit CNTPCTSS traps
KVM: arm64: nvhe: Synchronise with page table walker on vcpu run
KVM: arm64: vgic: Don't acquire its_lock before config_lock
KVM: selftests: Add test to verify KVM's supported XCR0
...
- Remove diagnostics and adjust config for CSD lock diagnostics
- Add a generic IPI-sending tracepoint, as currently there's no easy
way to instrument IPI origins: it's arch dependent and for some
major architectures it's not even consistently available.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Wp7f
-----END PGP SIGNATURE-----
Merge tag 'smp-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull SMP cross-CPU function-call updates from Ingo Molnar:
- Remove diagnostics and adjust config for CSD lock diagnostics
- Add a generic IPI-sending tracepoint, as currently there's no easy
way to instrument IPI origins: it's arch dependent and for some major
architectures it's not even consistently available.
* tag 'smp-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
trace,smp: Trace all smp_function_call*() invocations
trace: Add trace_ipi_send_cpu()
sched, smp: Trace smp callback causing an IPI
smp: reword smp call IPI comment
treewide: Trace IPIs sent via smp_send_reschedule()
irq_work: Trace self-IPIs sent via arch_irq_work_raise()
smp: Trace IPIs sent via arch_send_call_function_ipi_mask()
sched, smp: Trace IPIs sent via send_call_function_single_ipi()
trace: Add trace_ipi_send_cpumask()
kernel/smp: Make csdlock_debug= resettable
locking/csd_lock: Remove per-CPU data indirection from CSD lock debugging
locking/csd_lock: Remove added data from CSD lock debugging
locking/csd_lock: Add Kconfig option for csd_debug default
When introduced, IRQFD resampling worked on POWER8 with XICS. However
KVM on POWER9 has never implemented it - the compatibility mode code
("XICS-on-XIVE") misses the kvm_notify_acked_irq() call and the native
XIVE mode does not handle INTx in KVM at all.
This moved the capability support advertising to platforms and stops
advertising it on XIVE, i.e. POWER9 and later.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Anup Patel <anup@brainfault.org>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20220504074807.3616813-1-aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM irqfd based emulation of level-triggered interrupts doesn't work
quite correctly in some cases, particularly in the case of interrupts
that are handled in a Linux guest as oneshot interrupts (IRQF_ONESHOT).
Such an interrupt is acked to the device in its threaded irq handler,
i.e. later than it is acked to the interrupt controller (EOI at the end
of hardirq), not earlier.
Linux keeps such interrupt masked until its threaded handler finishes,
to prevent the EOI from re-asserting an unacknowledged interrupt.
However, with KVM + vfio (or whatever is listening on the resamplefd)
we always notify resamplefd at the EOI, so vfio prematurely unmasks the
host physical IRQ, thus a new physical interrupt is fired in the host.
This extra interrupt in the host is not a problem per se. The problem is
that it is unconditionally queued for injection into the guest, so the
guest sees an extra bogus interrupt. [*]
There are observed at least 2 user-visible issues caused by those
extra erroneous interrupts for a oneshot irq in the guest:
1. System suspend aborted due to a pending wakeup interrupt from
ChromeOS EC (drivers/platform/chrome/cros_ec.c).
2. Annoying "invalid report id data" errors from ELAN0000 touchpad
(drivers/input/mouse/elan_i2c_core.c), flooding the guest dmesg
every time the touchpad is touched.
The core issue here is that by the time when the guest unmasks the IRQ,
the physical IRQ line is no longer asserted (since the guest has
acked the interrupt to the device in the meantime), yet we
unconditionally inject the interrupt queued into the guest by the
previous resampling. So to fix the issue, we need a way to detect that
the IRQ is no longer pending, and cancel the queued interrupt in this
case.
With IOAPIC we are not able to probe the physical IRQ line state
directly (at least not if the underlying physical interrupt controller
is an IOAPIC too), so in this patch we use irqfd resampler for that.
Namely, instead of injecting the queued interrupt, we just notify the
resampler that this interrupt is done. If the IRQ line is actually
already deasserted, we are done. If it is still asserted, a new
interrupt will be shortly triggered through irqfd and injected into the
guest.
In the case if there is no irqfd resampler registered for this IRQ, we
cannot fix the issue, so we keep the existing behavior: immediately
unconditionally inject the queued interrupt.
This patch fixes the issue for x86 IOAPIC only. In the long run, we can
fix it for other irqchips and other architectures too, possibly taking
advantage of reading the physical state of the IRQ line, which is
possible with some other irqchips (e.g. with arm64 GIC, maybe even with
the legacy x86 PIC).
[*] In this description we assume that the interrupt is a physical host
interrupt forwarded to the guest e.g. by vfio. Potentially the same
issue may occur also with a purely virtual interrupt from an
emulated device, e.g. if the guest handles this interrupt, again, as
a oneshot interrupt.
Signed-off-by: Dmytro Maluka <dmy@semihalf.com>
Link: https://lore.kernel.org/kvm/31420943-8c5f-125c-a5ee-d2fde2700083@semihalf.com/
Link: https://lore.kernel.org/lkml/87o7wrug0w.wl-maz@kernel.org/
Message-Id: <20230322204344.50138-3-dmy@semihalf.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is useful to be able to do read-only traversal of the list of all the
registered irqfd resamplers without locking the resampler_lock mutex.
In particular, we are going to traverse it to search for a resampler
registered for the given irq of an irqchip, and that will be done with
an irqchip spinlock (ioapic->lock) held, so it is undesirable to lock a
mutex in this context. So turn this list into an RCU list.
For protecting the read side, reuse kvm->irq_srcu which is already used
for protecting a number of irq related things (kvm->irq_routing,
irqfd->resampler->list, kvm->irq_ack_notifier_list,
kvm->arch.mask_notifier_list).
Signed-off-by: Dmytro Maluka <dmy@semihalf.com>
Message-Id: <20230322204344.50138-2-dmy@semihalf.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix stale comments that were left behind when install_new_memslots() was
replaced by kvm_swap_active_memslots() as part of the scalable memslots
rework.
Fixes: a54d806688 ("KVM: Keep memslots in tree-based structures instead of array-based ones")
Signed-off-by: Jun Miao <jun.miao@intel.com>
Link: https://lore.kernel.org/r/20230223052851.1054799-1-jun.miao@intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
To be able to trace invocations of smp_send_reschedule(), rename the
arch-specific definitions of it to arch_smp_send_reschedule() and wrap it
into an smp_send_reschedule() that contains a tracepoint.
Changes to include the declaration of the tracepoint were driven by the
following coccinelle script:
@func_use@
@@
smp_send_reschedule(...);
@include@
@@
#include <trace/events/ipi.h>
@no_include depends on func_use && !include@
@@
#include <...>
+
+ #include <trace/events/ipi.h>
[csky bits]
[riscv bits]
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Guo Ren <guoren@kernel.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230307143558.294354-6-vschneid@redhat.com
KVM functions use "long" return values for functions that are wired up
to "struct file_operations", but otherwise use "int" return values for
functions that can return 0/-errno in order to avoid unintentional
divergences between 32-bit and 64-bit kernels.
Some code still uses "long" in unnecessary spots, though, which can
cause a little bit of confusion and unnecessary size casts. Let's
change these spots to use "int" types, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230208140105.655814-6-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
ARM:
* Fix the PMCR_EL0 reset value after the PMU rework
* Correctly handle S2 fault triggered by a S1 page table walk
by not always classifying it as a write, as this breaks on
R/O memslots
* Document why we cannot exit with KVM_EXIT_MMIO when taking
a write fault from a S1 PTW on a R/O memslot
* Put the Apple M2 on the naughty list for not being able to
correctly implement the vgic SEIS feature, just like the M1
before it
* Reviewer updates: Alex is stepping down, replaced by Zenghui
x86:
* Fix various rare locking issues in Xen emulation and teach lockdep
to detect them
* Documentation improvements
* Do not return host topology information from KVM_GET_SUPPORTED_CPUID
- Honor reserved regions when testing for IOMMU find grained super
page support, avoiding a regression on s390 for a firmware device
where the existence of the mapping, even if unused can trigger
an error state. (Niklas Schnelle)
- Fix a deadlock in releasing KVM references by using the alternate
.release() rather than .destroy() callback for the kvm-vfio device.
(Yi Liu)
-----BEGIN PGP SIGNATURE-----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=tdng
-----END PGP SIGNATURE-----
Merge tag 'vfio-v6.2-rc6' of https://github.com/awilliam/linux-vfio
Pull VFIO fixes from Alex Williamson:
- Honor reserved regions when testing for IOMMU find grained super page
support, avoiding a regression on s390 for a firmware device where
the existence of the mapping, even if unused can trigger an error
state. (Niklas Schnelle)
- Fix a deadlock in releasing KVM references by using the alternate
.release() rather than .destroy() callback for the kvm-vfio device.
(Yi Liu)
* tag 'vfio-v6.2-rc6' of https://github.com/awilliam/linux-vfio:
kvm/vfio: Fix potential deadlock on vfio group_lock
vfio/type1: Respect IOMMU reserved regions in vfio_test_domain_fgsp()
Currently it is possible that the final put of a KVM reference comes from
vfio during its device close operation. This occurs while the vfio group
lock is held; however, if the vfio device is still in the kvm device list,
then the following call chain could result in a deadlock:
VFIO holds group->group_lock/group_rwsem
-> kvm_put_kvm
-> kvm_destroy_vm
-> kvm_destroy_devices
-> kvm_vfio_destroy
-> kvm_vfio_file_set_kvm
-> vfio_file_set_kvm
-> try to hold group->group_lock/group_rwsem
The key function is the kvm_destroy_devices() which triggers destroy cb
of kvm_device_ops. It calls back to vfio and try to hold group_lock. So
if this path doesn't call back to vfio, this dead lock would be fixed.
Actually, there is a way for it. KVM provides another point to free the
kvm-vfio device which is the point when the device file descriptor is
closed. This can be achieved by providing the release cb instead of the
destroy cb. Also rename kvm_vfio_destroy() to be kvm_vfio_release().
/*
* Destroy is responsible for freeing dev.
*
* Destroy may be called before or after destructors are called
* on emulated I/O regions, depending on whether a reference is
* held by a vcpu or other kvm component that gets destroyed
* after the emulated I/O.
*/
void (*destroy)(struct kvm_device *dev);
/*
* Release is an alternative method to free the device. It is
* called when the device file descriptor is closed. Once
* release is called, the destroy method will not be called
* anymore as the device is removed from the device list of
* the VM. kvm->lock is held.
*/
void (*release)(struct kvm_device *dev);
Fixes: 421cfe6596 ("vfio: remove VFIO_GROUP_NOTIFY_SET_KVM")
Reported-by: Alex Williamson <alex.williamson@redhat.com>
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20230114000351.115444-1-mjrosato@linux.ibm.com
Link: https://lore.kernel.org/r/20230120150528.471752-1-yi.l.liu@intel.com
[aw: update comment as well, s/destroy/release/]
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Documentation/virt/kvm/locking.rst tells us that kvm->lock is taken outside
vcpu->mutex. But that doesn't actually happen very often; it's only in
some esoteric cases like migration with AMD SEV. This means that lockdep
usually doesn't notice, and doesn't do its job of keeping us honest.
Ensure that lockdep *always* knows about the ordering of these two locks,
by briefly taking vcpu->mutex in kvm_vm_ioctl_create_vcpu() while kvm->lock
is held.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20230111180651.14394-3-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert the last two "out" lables to "err" labels now that the dust has
settled, i.e. now that there are no more planned changes to the order
of things in kvm_init().
Use "err" instead of "out" as it's easier to describe what failed than it
is to describe what needs to be unwound, e.g. if allocating a per-CPU kick
mask fails, KVM needs to free any masks that were allocated, and of course
needs to unwind previous operations.
Reported-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221130230934.1014142-51-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allow architectures to opt out of the generic hardware enabling logic,
and opt out on both s390 and PPC, which don't need to manually enable
virtualization as it's always on (when available).
In addition to letting s390 and PPC drop a bit of dead code, this will
hopefully also allow ARM to clean up its related code, e.g. ARM has its
own per-CPU flag to track which CPUs have enable hardware due to the
need to keep hardware enabled indefinitely when pKVM is enabled.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Acked-by: Anup Patel <anup@brainfault.org>
Message-Id: <20221130230934.1014142-50-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Register the suspend/resume notifier hooks at the same time KVM registers
its reboot notifier so that all the code in kvm_init() that deals with
enabling/disabling hardware is bundled together. Opportunstically move
KVM's implementations to reside near the reboot notifier code for the
same reason.
Bunching the code together will allow architectures to opt out of KVM's
generic hardware enable/disable logic with minimal #ifdeffery.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221130230934.1014142-49-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rework detecting hardware enabling errors to use a local variable in the
"enable all" path to track whether or not enabling was successful across
all CPUs. Using a global variable complicates paths that enable hardware
only on the current CPU, e.g. kvm_resume() and kvm_online_cpu().
Opportunistically add a WARN if hardware enabling fails during
kvm_resume(), KVM is all kinds of hosed if CPU0 fails to enable hardware.
The WARN is largely futile in the current code, as KVM BUG()s on spurious
faults on VMX instructions, e.g. attempting to run a vCPU on CPU if
hardware enabling fails will explode.
------------[ cut here ]------------
kernel BUG at arch/x86/kvm/x86.c:508!
invalid opcode: 0000 [#1] SMP
CPU: 3 PID: 1009 Comm: CPU 4/KVM Not tainted 6.1.0-rc1+ #11
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:kvm_spurious_fault+0xa/0x10
Call Trace:
vmx_vcpu_load_vmcs+0x192/0x230 [kvm_intel]
vmx_vcpu_load+0x16/0x60 [kvm_intel]
kvm_arch_vcpu_load+0x32/0x1f0
vcpu_load+0x2f/0x40
kvm_arch_vcpu_ioctl_run+0x19/0x9d0
kvm_vcpu_ioctl+0x271/0x660
__x64_sys_ioctl+0x80/0xb0
do_syscall_64+0x2b/0x50
entry_SYSCALL_64_after_hwframe+0x46/0xb0
But, the WARN may provide a breadcrumb to understand what went awry, and
someday KVM may fix one or both of those bugs, e.g. by finding a way to
eat spurious faults no matter the context (easier said than done due to
side effects of certain operations, e.g. Intel's VMCLEAR).
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
[sean: rebase, WARN on failure in kvm_resume()]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221130230934.1014142-48-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use a per-CPU variable instead of a shared bitmap to track which CPUs
have successfully enabled virtualization hardware. Using a per-CPU bool
avoids the need for an additional allocation, and arguably yields easier
to read code. Using a bitmap would be advantageous if KVM used it to
avoid generating IPIs to CPUs that failed to enable hardware, but that's
an extreme edge case and not worth optimizing, and the low level helpers
would still want to keep their individual checks as attempting to enable
virtualization hardware when it's already enabled can be problematic,
e.g. Intel's VMXON will fault.
Opportunistically change the order in hardware_enable_nolock() to set
the flag if and only if hardware enabling is successful, instead of
speculatively setting the flag and then clearing it on failure.
Add a comment explaining that the check in hardware_disable_nolock()
isn't simply paranoia. Waaay back when, commit 1b6c016818 ("KVM: Keep
track of which cpus have virtualization enabled"), added the logic as a
guards against CPU hotplug racing with hardware enable/disable. Now that
KVM has eliminated the race by taking cpu_hotplug_lock for read (via
cpus_read_lock()) when enabling or disabling hardware, at first glance it
appears that the check is now superfluous, i.e. it's tempting to remove
the per-CPU flag entirely...
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221130230934.1014142-47-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop the superfluous invocation of hardware_disable_nolock() during
kvm_exit(), as it's nothing more than a glorified nop.
KVM automatically disables hardware on all CPUs when the last VM is
destroyed, and kvm_exit() cannot be called until the last VM goes
away as the calling module is pinned by an elevated refcount of the fops
associated with /dev/kvm. This holds true even on x86, where the caller
of kvm_exit() is not kvm.ko, but is instead a dependent module, kvm_amd.ko
or kvm_intel.ko, as kvm_chardev_ops.owner is set to the module that calls
kvm_init(), not hardcoded to the base kvm.ko module.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
[sean: rework changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221130230934.1014142-46-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop kvm_count_lock and instead protect kvm_usage_count with kvm_lock now
that KVM hooks CPU hotplug during the ONLINE phase, which can sleep.
Previously, KVM hooked the STARTING phase, which is not allowed to sleep
and thus could not take kvm_lock (a mutex). This effectively allows the
task that's initiating hardware enabling/disabling to preempted and/or
migrated.
Note, the Documentation/virt/kvm/locking.rst statement that kvm_count_lock
is "raw" because hardware enabling/disabling needs to be atomic with
respect to migration is wrong on multiple fronts. First, while regular
spinlocks can be preempted, the task holding the lock cannot be migrated.
Second, preventing migration is not required. on_each_cpu() disables
preemption, which ensures that cpus_hardware_enabled correctly reflects
hardware state. The task may be preempted/migrated between bumping
kvm_usage_count and invoking on_each_cpu(), but that's perfectly ok as
kvm_usage_count is still protected, e.g. other tasks that call
hardware_enable_all() will be blocked until the preempted/migrated owner
exits its critical section.
KVM does have lockless accesses to kvm_usage_count in the suspend/resume
flows, but those are safe because all tasks must be frozen prior to
suspending CPUs, and a task cannot be frozen while it holds one or more
locks (userspace tasks are frozen via a fake signal).
Preemption doesn't need to be explicitly disabled in the hotplug path.
The hotplug thread is pinned to the CPU that's being hotplugged, and KVM
only cares about having a stable CPU, i.e. to ensure hardware is enabled
on the correct CPU. Lockep, i.e. check_preemption_disabled(), plays nice
with this state too, as is_percpu_thread() is true for the hotplug thread.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221130230934.1014142-45-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the non-raw smp_processor_id() in the low hardware enable/disable
helpers as KVM absolutely relies on the CPU being stable, e.g. KVM would
end up with incorrect state if the task were migrated between accessing
cpus_hardware_enabled and actually enabling/disabling hardware.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221130230934.1014142-44-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Disable CPU hotplug when enabling/disabling hardware to prevent the
corner case where if the following sequence occurs:
1. A hotplugged CPU marks itself online in cpu_online_mask
2. The hotplugged CPU enables interrupt before invoking KVM's ONLINE
callback
3 hardware_{en,dis}able_all() is invoked on another CPU
the hotplugged CPU will be included in on_each_cpu() and thus get sent
through hardware_{en,dis}able_nolock() before kvm_online_cpu() is called.
start_secondary { ...
set_cpu_online(smp_processor_id(), true); <- 1
...
local_irq_enable(); <- 2
...
cpu_startup_entry(CPUHP_AP_ONLINE_IDLE); <- 3
}
KVM currently fudges around this race by keeping track of which CPUs have
done hardware enabling (see commit 1b6c016818 "KVM: Keep track of which
cpus have virtualization enabled"), but that's an inefficient, convoluted,
and hacky solution.
Signed-off-by: Chao Gao <chao.gao@intel.com>
[sean: split to separate patch, write changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221130230934.1014142-43-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The CPU STARTING section doesn't allow callbacks to fail. Move KVM's
hotplug callback to ONLINE section so that it can abort onlining a CPU in
certain cases to avoid potentially breaking VMs running on existing CPUs.
For example, when KVM fails to enable hardware virtualization on the
hotplugged CPU.
Place KVM's hotplug state before CPUHP_AP_SCHED_WAIT_EMPTY as it ensures
when offlining a CPU, all user tasks and non-pinned kernel tasks have left
the CPU, i.e. there cannot be a vCPU task around. So, it is safe for KVM's
CPU offline callback to disable hardware virtualization at that point.
Likewise, KVM's online callback can enable hardware virtualization before
any vCPU task gets a chance to run on hotplugged CPUs.
Drop kvm_x86_check_processor_compatibility()'s WARN that IRQs are
disabled, as the ONLINE section runs with IRQs disabled. The WARN wasn't
intended to be a requirement, e.g. disabling preemption is sufficient,
the IRQ thing was purely an aggressive sanity check since the helper was
only ever invoked via SMP function call.
Rename KVM's CPU hotplug callbacks accordingly.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Reviewed-by: Yuan Yao <yuan.yao@intel.com>
[sean: drop WARN that IRQs are disabled]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221130230934.1014142-42-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop kvm_arch_check_processor_compat() and its support code now that all
architecture implementations are nops.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Eric Farman <farman@linux.ibm.com> # s390
Acked-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Message-Id: <20221130230934.1014142-33-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop kvm_arch_init() and kvm_arch_exit() now that all implementations
are nops.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com> # s390
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Anup Patel <anup@brainfault.org>
Message-Id: <20221130230934.1014142-30-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop kvm_arch_hardware_setup() and kvm_arch_hardware_unsetup() now that
all implementations are nops.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com> # s390
Acked-by: Anup Patel <anup@brainfault.org>
Message-Id: <20221130230934.1014142-10-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the call to kvm_vfio_ops_exit() further up kvm_exit() to try and
bring some amount of symmetry to the setup order in kvm_init(), and more
importantly so that the arch hooks are invoked dead last by kvm_exit().
This will allow arch code to move away from the arch hooks without any
change in ordering between arch code and common code in kvm_exit().
That kvm_vfio_ops_exit() is called last appears to be 100% arbitrary. It
was bolted on after the fact by commit 571ee1b685 ("kvm: vfio: fix
unregister kvm_device_ops of vfio"). The nullified kvm_device_ops_table
is also local to kvm_main.c and is used only when there are active VMs,
so unless arch code is doing something truly bizarre, nullifying the
table earlier in kvm_exit() is little more than a nop.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20221130230934.1014142-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allocate cpus_hardware_enabled after arch hardware setup so that arch
"init" and "hardware setup" are called back-to-back and thus can be
combined in a future patch. cpus_hardware_enabled is never used before
kvm_create_vm(), i.e. doesn't have a dependency with hardware setup and
only needs to be allocated before /dev/kvm is exposed to userspace.
Free the object before the arch hooks are invoked to maintain symmetry,
and so that arch code can move away from the hooks without having to
worry about ordering changes.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Yuan Yao <yuan.yao@intel.com>
Message-Id: <20221130230934.1014142-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move initialization of KVM's IRQ FD workqueue below arch hardware setup
as a step towards consolidating arch "init" and "hardware setup", and
eventually towards dropping the hooks entirely. There is no dependency
on the workqueue being created before hardware setup, the workqueue is
used only when destroying VMs, i.e. only needs to be created before
/dev/kvm is exposed to userspace.
Move the destruction of the workqueue before the arch hooks to maintain
symmetry, and so that arch code can move away from the hooks without
having to worry about ordering changes.
Reword the comment about kvm_irqfd_init() needing to come after
kvm_arch_init() to call out that kvm_arch_init() must come before common
KVM does _anything_, as x86 very subtly relies on that behavior to deal
with multiple calls to kvm_init(), e.g. if userspace attempts to load
kvm_amd.ko and kvm_intel.ko. Tag the code with a FIXME, as x86's subtle
requirement is gross, and invoking an arch callback as the very first
action in a helper that is called only from arch code is silly.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221130230934.1014142-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Register /dev/kvm, i.e. expose KVM to userspace, only after all other
setup has completed. Once /dev/kvm is exposed, userspace can start
invoking KVM ioctls, creating VMs, etc... If userspace creates a VM
before KVM is done with its configuration, bad things may happen, e.g.
KVM will fail to properly migrate vCPU state if a VM is created before
KVM has registered preemption notifiers.
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221130230934.1014142-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
x86:
* Change tdp_mmu to a read-only parameter
* Separate TDP and shadow MMU page fault paths
* Enable Hyper-V invariant TSC control
selftests:
* Use TAP interface for kvm_binary_stats_test and tsc_msrs_test
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
x86:
* several fixes to nested VMX execution controls
* fixes and clarification to the documentation for Xen emulation
* do not unnecessarily release a pmu event with zero period
* MMU fixes
* fix Coverity warning in kvm_hv_flush_tlb()
selftests:
* fixes for the ucall mechanism in selftests
* other fixes mostly related to compilation with clang
No code is using KVM_MMU_READ_LOCK() or KVM_MMU_READ_UNLOCK(). They
used to be in virt/kvm/pfncache.c:
KVM_MMU_READ_LOCK(kvm);
retry = mmu_notifier_retry_hva(kvm, mmu_seq, uhva);
KVM_MMU_READ_UNLOCK(kvm);
However, since 58cd407ca4 ("KVM: Fix multiple races in gfn=>pfn cache
refresh", 2022-05-25) the code is only relying on the MMU notifier's
invalidation count and sequence number.
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Message-Id: <20221207120617.9409-1-jiangshanlai@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Enable the per-vcpu dirty-ring tracking mechanism, together with an
option to keep the good old dirty log around for pages that are
dirtied by something other than a vcpu.
* Switch to the relaxed parallel fault handling, using RCU to delay
page table reclaim and giving better performance under load.
* Relax the MTE ABI, allowing a VMM to use the MAP_SHARED mapping option,
which multi-process VMMs such as crosvm rely on (see merge commit 382b5b87a9:
"Fix a number of issues with MTE, such as races on the tags being
initialised vs the PG_mte_tagged flag as well as the lack of support
for VM_SHARED when KVM is involved. Patches from Catalin Marinas and
Peter Collingbourne").
* Merge the pKVM shadow vcpu state tracking that allows the hypervisor
to have its own view of a vcpu, keeping that state private.
* Add support for the PMUv3p5 architecture revision, bringing support
for 64bit counters on systems that support it, and fix the
no-quite-compliant CHAIN-ed counter support for the machines that
actually exist out there.
* Fix a handful of minor issues around 52bit VA/PA support (64kB pages
only) as a prefix of the oncoming support for 4kB and 16kB pages.
* Pick a small set of documentation and spelling fixes, because no
good merge window would be complete without those.
s390:
* Second batch of the lazy destroy patches
* First batch of KVM changes for kernel virtual != physical address support
* Removal of a unused function
x86:
* Allow compiling out SMM support
* Cleanup and documentation of SMM state save area format
* Preserve interrupt shadow in SMM state save area
* Respond to generic signals during slow page faults
* Fixes and optimizations for the non-executable huge page errata fix.
* Reprogram all performance counters on PMU filter change
* Cleanups to Hyper-V emulation and tests
* Process Hyper-V TLB flushes from a nested guest (i.e. from a L2 guest
running on top of a L1 Hyper-V hypervisor)
* Advertise several new Intel features
* x86 Xen-for-KVM:
** Allow the Xen runstate information to cross a page boundary
** Allow XEN_RUNSTATE_UPDATE flag behaviour to be configured
** Add support for 32-bit guests in SCHEDOP_poll
* Notable x86 fixes and cleanups:
** One-off fixes for various emulation flows (SGX, VMXON, NRIPS=0).
** Reinstate IBPB on emulated VM-Exit that was incorrectly dropped a few
years back when eliminating unnecessary barriers when switching between
vmcs01 and vmcs02.
** Clean up vmread_error_trampoline() to make it more obvious that params
must be passed on the stack, even for x86-64.
** Let userspace set all supported bits in MSR_IA32_FEAT_CTL irrespective
of the current guest CPUID.
** Fudge around a race with TSC refinement that results in KVM incorrectly
thinking a guest needs TSC scaling when running on a CPU with a
constant TSC, but no hardware-enumerated TSC frequency.
** Advertise (on AMD) that the SMM_CTL MSR is not supported
** Remove unnecessary exports
Generic:
* Support for responding to signals during page faults; introduces
new FOLL_INTERRUPTIBLE flag that was reviewed by mm folks
Selftests:
* Fix an inverted check in the access tracking perf test, and restore
support for asserting that there aren't too many idle pages when
running on bare metal.
* Fix build errors that occur in certain setups (unsure exactly what is
unique about the problematic setup) due to glibc overriding
static_assert() to a variant that requires a custom message.
* Introduce actual atomics for clear/set_bit() in selftests
* Add support for pinning vCPUs in dirty_log_perf_test.
* Rename the so called "perf_util" framework to "memstress".
* Add a lightweight psuedo RNG for guest use, and use it to randomize
the access pattern and write vs. read percentage in the memstress tests.
* Add a common ucall implementation; code dedup and pre-work for running
SEV (and beyond) guests in selftests.
* Provide a common constructor and arch hook, which will eventually be
used by x86 to automatically select the right hypercall (AMD vs. Intel).
* A bunch of added/enabled/fixed selftests for ARM64, covering memslots,
breakpoints, stage-2 faults and access tracking.
* x86-specific selftest changes:
** Clean up x86's page table management.
** Clean up and enhance the "smaller maxphyaddr" test, and add a related
test to cover generic emulation failure.
** Clean up the nEPT support checks.
** Add X86_PROPERTY_* framework to retrieve multi-bit CPUID values.
** Fix an ordering issue in the AMX test introduced by recent conversions
to use kvm_cpu_has(), and harden the code to guard against similar bugs
in the future. Anything that tiggers caching of KVM's supported CPUID,
kvm_cpu_has() in this case, effectively hides opt-in XSAVE features if
the caching occurs before the test opts in via prctl().
Documentation:
* Remove deleted ioctls from documentation
* Clean up the docs for the x86 MSR filter.
* Various fixes
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmOaFrcUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPemQgAq49excg2Cc+EsHnZw3vu/QWdA0Rt
KhL3OgKxuHNjCbD2O9n2t5di7eJOTQ7F7T0eDm3xPTr4FS8LQ2327/mQePU/H2CF
mWOpq9RBWLzFsSTeVA2Mz9TUTkYSnDHYuRsBvHyw/n9cL76BWVzjImldFtjYjjex
yAwl8c5itKH6bc7KO+5ydswbvBzODkeYKUSBNdbn6m0JGQST7XppNwIAJvpiHsii
Qgpk0e4Xx9q4PXG/r5DedI6BlufBsLhv0aE9SHPzyKH3JbbUFhJYI8ZD5OhBQuYW
MwxK2KlM5Jm5ud2NZDDlsMmmvd1lnYCFDyqNozaKEWC1Y5rq1AbMa51fXA==
=QAYX
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM64:
- Enable the per-vcpu dirty-ring tracking mechanism, together with an
option to keep the good old dirty log around for pages that are
dirtied by something other than a vcpu.
- Switch to the relaxed parallel fault handling, using RCU to delay
page table reclaim and giving better performance under load.
- Relax the MTE ABI, allowing a VMM to use the MAP_SHARED mapping
option, which multi-process VMMs such as crosvm rely on (see merge
commit 382b5b87a9: "Fix a number of issues with MTE, such as
races on the tags being initialised vs the PG_mte_tagged flag as
well as the lack of support for VM_SHARED when KVM is involved.
Patches from Catalin Marinas and Peter Collingbourne").
- Merge the pKVM shadow vcpu state tracking that allows the
hypervisor to have its own view of a vcpu, keeping that state
private.
- Add support for the PMUv3p5 architecture revision, bringing support
for 64bit counters on systems that support it, and fix the
no-quite-compliant CHAIN-ed counter support for the machines that
actually exist out there.
- Fix a handful of minor issues around 52bit VA/PA support (64kB
pages only) as a prefix of the oncoming support for 4kB and 16kB
pages.
- Pick a small set of documentation and spelling fixes, because no
good merge window would be complete without those.
s390:
- Second batch of the lazy destroy patches
- First batch of KVM changes for kernel virtual != physical address
support
- Removal of a unused function
x86:
- Allow compiling out SMM support
- Cleanup and documentation of SMM state save area format
- Preserve interrupt shadow in SMM state save area
- Respond to generic signals during slow page faults
- Fixes and optimizations for the non-executable huge page errata
fix.
- Reprogram all performance counters on PMU filter change
- Cleanups to Hyper-V emulation and tests
- Process Hyper-V TLB flushes from a nested guest (i.e. from a L2
guest running on top of a L1 Hyper-V hypervisor)
- Advertise several new Intel features
- x86 Xen-for-KVM:
- Allow the Xen runstate information to cross a page boundary
- Allow XEN_RUNSTATE_UPDATE flag behaviour to be configured
- Add support for 32-bit guests in SCHEDOP_poll
- Notable x86 fixes and cleanups:
- One-off fixes for various emulation flows (SGX, VMXON, NRIPS=0).
- Reinstate IBPB on emulated VM-Exit that was incorrectly dropped
a few years back when eliminating unnecessary barriers when
switching between vmcs01 and vmcs02.
- Clean up vmread_error_trampoline() to make it more obvious that
params must be passed on the stack, even for x86-64.
- Let userspace set all supported bits in MSR_IA32_FEAT_CTL
irrespective of the current guest CPUID.
- Fudge around a race with TSC refinement that results in KVM
incorrectly thinking a guest needs TSC scaling when running on a
CPU with a constant TSC, but no hardware-enumerated TSC
frequency.
- Advertise (on AMD) that the SMM_CTL MSR is not supported
- Remove unnecessary exports
Generic:
- Support for responding to signals during page faults; introduces
new FOLL_INTERRUPTIBLE flag that was reviewed by mm folks
Selftests:
- Fix an inverted check in the access tracking perf test, and restore
support for asserting that there aren't too many idle pages when
running on bare metal.
- Fix build errors that occur in certain setups (unsure exactly what
is unique about the problematic setup) due to glibc overriding
static_assert() to a variant that requires a custom message.
- Introduce actual atomics for clear/set_bit() in selftests
- Add support for pinning vCPUs in dirty_log_perf_test.
- Rename the so called "perf_util" framework to "memstress".
- Add a lightweight psuedo RNG for guest use, and use it to randomize
the access pattern and write vs. read percentage in the memstress
tests.
- Add a common ucall implementation; code dedup and pre-work for
running SEV (and beyond) guests in selftests.
- Provide a common constructor and arch hook, which will eventually
be used by x86 to automatically select the right hypercall (AMD vs.
Intel).
- A bunch of added/enabled/fixed selftests for ARM64, covering
memslots, breakpoints, stage-2 faults and access tracking.
- x86-specific selftest changes:
- Clean up x86's page table management.
- Clean up and enhance the "smaller maxphyaddr" test, and add a
related test to cover generic emulation failure.
- Clean up the nEPT support checks.
- Add X86_PROPERTY_* framework to retrieve multi-bit CPUID values.
- Fix an ordering issue in the AMX test introduced by recent
conversions to use kvm_cpu_has(), and harden the code to guard
against similar bugs in the future. Anything that tiggers
caching of KVM's supported CPUID, kvm_cpu_has() in this case,
effectively hides opt-in XSAVE features if the caching occurs
before the test opts in via prctl().
Documentation:
- Remove deleted ioctls from documentation
- Clean up the docs for the x86 MSR filter.
- Various fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (361 commits)
KVM: x86: Add proper ReST tables for userspace MSR exits/flags
KVM: selftests: Allocate ucall pool from MEM_REGION_DATA
KVM: arm64: selftests: Align VA space allocator with TTBR0
KVM: arm64: Fix benign bug with incorrect use of VA_BITS
KVM: arm64: PMU: Fix period computation for 64bit counters with 32bit overflow
KVM: x86: Advertise that the SMM_CTL MSR is not supported
KVM: x86: remove unnecessary exports
KVM: selftests: Fix spelling mistake "probabalistic" -> "probabilistic"
tools: KVM: selftests: Convert clear/set_bit() to actual atomics
tools: Drop "atomic_" prefix from atomic test_and_set_bit()
tools: Drop conflicting non-atomic test_and_{clear,set}_bit() helpers
KVM: selftests: Use non-atomic clear/set bit helpers in KVM tests
perf tools: Use dedicated non-atomic clear/set bit helpers
tools: Take @bit as an "unsigned long" in {clear,set}_bit() helpers
KVM: arm64: selftests: Enable single-step without a "full" ucall()
KVM: x86: fix APICv/x2AVIC disabled when vm reboot by itself
KVM: Remove stale comment about KVM_REQ_UNHALT
KVM: Add missing arch for KVM_CREATE_DEVICE and KVM_{SET,GET}_DEVICE_ATTR
KVM: Reference to kvm_userspace_memory_region in doc and comments
KVM: Delete all references to removed KVM_SET_MEMORY_ALIAS ioctl
...
x86 Xen-for-KVM:
* Allow the Xen runstate information to cross a page boundary
* Allow XEN_RUNSTATE_UPDATE flag behaviour to be configured
* add support for 32-bit guests in SCHEDOP_poll
x86 fixes:
* One-off fixes for various emulation flows (SGX, VMXON, NRIPS=0).
* Reinstate IBPB on emulated VM-Exit that was incorrectly dropped a few
years back when eliminating unnecessary barriers when switching between
vmcs01 and vmcs02.
* Clean up the MSR filter docs.
* Clean up vmread_error_trampoline() to make it more obvious that params
must be passed on the stack, even for x86-64.
* Let userspace set all supported bits in MSR_IA32_FEAT_CTL irrespective
of the current guest CPUID.
* Fudge around a race with TSC refinement that results in KVM incorrectly
thinking a guest needs TSC scaling when running on a CPU with a
constant TSC, but no hardware-enumerated TSC frequency.
* Advertise (on AMD) that the SMM_CTL MSR is not supported
* Remove unnecessary exports
Selftests:
* Fix an inverted check in the access tracking perf test, and restore
support for asserting that there aren't too many idle pages when
running on bare metal.
* Fix an ordering issue in the AMX test introduced by recent conversions
to use kvm_cpu_has(), and harden the code to guard against similar bugs
in the future. Anything that tiggers caching of KVM's supported CPUID,
kvm_cpu_has() in this case, effectively hides opt-in XSAVE features if
the caching occurs before the test opts in via prctl().
* Fix build errors that occur in certain setups (unsure exactly what is
unique about the problematic setup) due to glibc overriding
static_assert() to a variant that requires a custom message.
* Introduce actual atomics for clear/set_bit() in selftests
Documentation:
* Remove deleted ioctls from documentation
* Various fixes
- Enable the per-vcpu dirty-ring tracking mechanism, together with an
option to keep the good old dirty log around for pages that are
dirtied by something other than a vcpu.
- Switch to the relaxed parallel fault handling, using RCU to delay
page table reclaim and giving better performance under load.
- Relax the MTE ABI, allowing a VMM to use the MAP_SHARED mapping
option, which multi-process VMMs such as crosvm rely on.
- Merge the pKVM shadow vcpu state tracking that allows the hypervisor
to have its own view of a vcpu, keeping that state private.
- Add support for the PMUv3p5 architecture revision, bringing support
for 64bit counters on systems that support it, and fix the
no-quite-compliant CHAIN-ed counter support for the machines that
actually exist out there.
- Fix a handful of minor issues around 52bit VA/PA support (64kB pages
only) as a prefix of the oncoming support for 4kB and 16kB pages.
- Add/Enable/Fix a bunch of selftests covering memslots, breakpoints,
stage-2 faults and access tracking. You name it, we got it, we
probably broke it.
- Pick a small set of documentation and spelling fixes, because no
good merge window would be complete without those.
As a side effect, this tag also drags:
- The 'kvmarm-fixes-6.1-3' tag as a dependency to the dirty-ring
series
- A shared branch with the arm64 tree that repaints all the system
registers to match the ARM ARM's naming, and resulting in
interesting conflicts
-----BEGIN PGP SIGNATURE-----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=iIPT
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 6.2
- Enable the per-vcpu dirty-ring tracking mechanism, together with an
option to keep the good old dirty log around for pages that are
dirtied by something other than a vcpu.
- Switch to the relaxed parallel fault handling, using RCU to delay
page table reclaim and giving better performance under load.
- Relax the MTE ABI, allowing a VMM to use the MAP_SHARED mapping
option, which multi-process VMMs such as crosvm rely on.
- Merge the pKVM shadow vcpu state tracking that allows the hypervisor
to have its own view of a vcpu, keeping that state private.
- Add support for the PMUv3p5 architecture revision, bringing support
for 64bit counters on systems that support it, and fix the
no-quite-compliant CHAIN-ed counter support for the machines that
actually exist out there.
- Fix a handful of minor issues around 52bit VA/PA support (64kB pages
only) as a prefix of the oncoming support for 4kB and 16kB pages.
- Add/Enable/Fix a bunch of selftests covering memslots, breakpoints,
stage-2 faults and access tracking. You name it, we got it, we
probably broke it.
- Pick a small set of documentation and spelling fixes, because no
good merge window would be complete without those.
As a side effect, this tag also drags:
- The 'kvmarm-fixes-6.1-3' tag as a dependency to the dirty-ring
series
- A shared branch with the arm64 tree that repaints all the system
registers to match the ARM ARM's naming, and resulting in
interesting conflicts
* kvm-arm64/dirty-ring:
: .
: Add support for the "per-vcpu dirty-ring tracking with a bitmap
: and sprinkles on top", courtesy of Gavin Shan.
:
: This branch drags the kvmarm-fixes-6.1-3 tag which was already
: merged in 6.1-rc4 so that the branch is in a working state.
: .
KVM: Push dirty information unconditionally to backup bitmap
KVM: selftests: Automate choosing dirty ring size in dirty_log_test
KVM: selftests: Clear dirty ring states between two modes in dirty_log_test
KVM: selftests: Use host page size to map ring buffer in dirty_log_test
KVM: arm64: Enable ring-based dirty memory tracking
KVM: Support dirty ring in conjunction with bitmap
KVM: Move declaration of kvm_cpu_dirty_log_size() to kvm_dirty_ring.h
KVM: x86: Introduce KVM_REQ_DIRTY_RING_SOFT_FULL
Signed-off-by: Marc Zyngier <maz@kernel.org>
Pull Xen-for-KVM changes from David Woodhouse:
* add support for 32-bit guests in SCHEDOP_poll
* the rest of the gfn-to-pfn cache API cleanup
"I still haven't reinstated the last of those patches to make gpc->len
immutable."
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove a comment about KVM_REQ_UNHALT being set by kvm_vcpu_check_block()
that was missed when KVM_REQ_UNHALT was dropped.
Fixes: c59fb12758 ("KVM: remove KVM_REQ_UNHALT")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221201220433.31366-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When refreshing a gfn=>pfn cache, skip straight to unlocking if the cache
already valid instead of stuffing the "old" variables to turn the
unmapping outro into a nop.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Drop the @gpa param from the exported check()+refresh() helpers and limit
changing the cache's GPA to the activate path. All external users just
feed in gpc->gpa, i.e. this is a fancy nop.
Allowing users to change the GPA at check()+refresh() is dangerous as
those helpers explicitly allow concurrent calls, e.g. KVM could get into
a livelock scenario. It's also unclear as to what the expected behavior
should be if multiple tasks attempt to refresh with different GPAs.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Don't partially reinitialize a gfn=>pfn cache when activating the cache,
and instead assert that the cache is not valid during activation. Bug
the VM if the assertion fails, as use-after-free and/or data corruption
is all but guaranteed if KVM ends up with a valid-but-inactive cache.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Drop kvm_gpc_unmap() as it has no users and unclear requirements. The
API was added as part of the original gfn_to_pfn_cache support, but its
sole usage[*] was never merged. Fold the guts of kvm_gpc_unmap() into
the deactivate path and drop the API. Omit acquiring refresh_lock as
as concurrent calls to kvm_gpc_deactivate() are not allowed (this is
not enforced, e.g. via lockdep. due to it being called during vCPU
destruction).
If/when temporary unmapping makes a comeback, the desirable behavior is
likely to restrict temporary unmapping to vCPU-exclusive mappings and
require the vcpu->mutex be held to serialize unmap. Use of the
refresh_lock to protect unmapping was somewhat specuatively added by
commit 93984f19e7 ("KVM: Fully serialize gfn=>pfn cache refresh via
mutex") to guard against concurrent unmaps, but the primary use case of
the temporary unmap, nested virtualization[*], doesn't actually need or
want concurrent unmaps.
[*] https://lore.kernel.org/all/20211210163625.2886-7-dwmw2@infradead.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Make kvm_gpc_refresh() use kvm instance cached in gfn_to_pfn_cache.
No functional change intended.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
[sean: leave kvm_gpc_unmap() as-is]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Make hva_to_pfn_retry() use kvm instance cached in gfn_to_pfn_cache.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Make kvm_gpc_check() use kvm instance cached in gfn_to_pfn_cache.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Move the assignment of immutable properties @kvm, @vcpu, and @usage to
the initializer. Make _activate() and _deactivate() use stored values.
Note, @len is also effectively immutable for most cases, but not in the
case of the Xen runstate cache, which may be split across two pages and
the length of the first segment will depend on its address.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
[sean: handle @len in a separate patch]
Signed-off-by: Sean Christopherson <seanjc@google.com>
[dwmw2: acknowledge that @len can actually change for some use cases]
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Remove the unused @kvm argument from gpc_unmap_khva().
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Formalize "gpc" as the acronym and use it in function names.
No functional change intended.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This brings in a few important fixes for Xen emulation.
While nobody should be enabling it, the bug effectively
allows userspace to read arbitrary memory.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This brings in a few important fixes for Xen emulation.
While nobody should be enabling it, the bug effectively
allows userspace to read arbitrary memory.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In the case where a GPC is refreshed to a different location within the
same page, we didn't bother to update it. Mostly we don't need to, but
since the ->khva field also includes the offset within the page, that
does have to be updated.
Fixes: 3ba2c95ea1 ("KVM: Do not incorporate page offset into gfn=>pfn cache user address")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Cc: stable@kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since gfn_to_memslot() is relatively expensive, it helps to
skip it if it the memslot cannot possibly have dirty logging
enabled. In order to do this, add to struct kvm a counter
of the number of log-page memslots. While the correct value
can only be read with slots_lock taken, the NX recovery thread
is content with using an approximate value. Therefore, the
counter is an atomic_t.
Based on https://lore.kernel.org/kvm/20221027200316.2221027-2-dmatlack@google.com/
by David Matlack.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Obey kvm.halt_poll_ns in VMs not using KVM_CAP_HALT_POLL on every halt,
rather than just sampling the module parameter when the VM is first
created. This restore the original behavior of kvm.halt_poll_ns for VMs
that have not opted into KVM_CAP_HALT_POLL.
Notably, this change restores the ability for admins to disable or
change the maximum halt-polling time system wide for VMs not using
KVM_CAP_HALT_POLL.
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Fixes: acd05785e4 ("kvm: add capability for halt polling")
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20221117001657.1067231-4-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Avoid re-reading kvm->max_halt_poll_ns multiple times during
halt-polling except when it is explicitly useful, e.g. to check if the
max time changed across a halt. kvm->max_halt_poll_ns can be changed at
any time by userspace via KVM_CAP_HALT_POLL.
This bug is unlikely to cause any serious side-effects. In the worst
case one halt polls for shorter or longer than it should, and then is
fixed up on the next halt. Furthmore, this is still possible since
kvm->max_halt_poll_ns are not synchronized with halts.
Fixes: acd05785e4 ("kvm: add capability for halt polling")
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20221117001657.1067231-3-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cap vcpu->halt_poll_ns based on the max halt polling time just before
halting, rather than after the last halt. This arguably provides better
accuracy if an admin disables halt polling in between halts, although
the improvement is nominal.
A side-effect of this change is that grow_halt_poll_ns() no longer needs
to access vcpu->kvm->max_halt_poll_ns, which will be useful in a future
commit where the max halt polling time can come from the module parameter
halt_poll_ns instead.
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20221117001657.1067231-2-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In mark_page_dirty_in_slot(), we bail out when no running vcpu exists
and a running vcpu context is strictly required by architecture. It may
cause backwards compatible issue. Currently, saving vgic/its tables is
the only known case where no running vcpu context is expected. We may
have other unknown cases where no running vcpu context exists and it's
reported by the warning message and we bail out without pushing the
dirty information to the backup bitmap. For this, the application is
going to enable the backup bitmap for the unknown cases. However, the
dirty information can't be pushed to the backup bitmap even though the
backup bitmap is enabled for those unknown cases in the application,
until the unknown cases are added to the allowed list of non-running
vcpu context with extra code changes to the host kernel.
In order to make the new application, where the backup bitmap has been
enabled, to work with the unchanged host, we continue to push the dirty
information to the backup bitmap instead of bailing out early. With the
added check on 'memslot->dirty_bitmap' to mark_page_dirty_in_slot(), the
kernel crash is avoided silently by the combined conditions: no running
vcpu context, kvm_arch_allow_write_without_running_vcpu() returns 'true',
and the backup bitmap (KVM_CAP_DIRTY_LOG_RING_WITH_BITMAP) isn't enabled
yet.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221112094322.21911-1-gshan@redhat.com
ARM64 needs to dirty memory outside of a VCPU context when VGIC/ITS is
enabled. It's conflicting with that ring-based dirty page tracking always
requires a running VCPU context.
Introduce a new flavor of dirty ring that requires the use of both VCPU
dirty rings and a dirty bitmap. The expectation is that for non-VCPU
sources of dirty memory (such as the VGIC/ITS on arm64), KVM writes to
the dirty bitmap. Userspace should scan the dirty bitmap before migrating
the VM to the target.
Use an additional capability to advertise this behavior. The newly added
capability (KVM_CAP_DIRTY_LOG_RING_WITH_BITMAP) can't be enabled before
KVM_CAP_DIRTY_LOG_RING_ACQ_REL on ARM64. In this way, the newly added
capability is treated as an extension of KVM_CAP_DIRTY_LOG_RING_ACQ_REL.
Suggested-by: Marc Zyngier <maz@kernel.org>
Suggested-by: Peter Xu <peterx@redhat.com>
Co-developed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221110104914.31280-4-gshan@redhat.com
The VCPU isn't expected to be runnable when the dirty ring becomes soft
full, until the dirty pages are harvested and the dirty ring is reset
from userspace. So there is a check in each guest's entrace to see if
the dirty ring is soft full or not. The VCPU is stopped from running if
its dirty ring has been soft full. The similar check will be needed when
the feature is going to be supported on ARM64. As Marc Zyngier suggested,
a new event will avoid pointless overhead to check the size of the dirty
ring ('vcpu->kvm->dirty_ring_size') in each guest's entrance.
Add KVM_REQ_DIRTY_RING_SOFT_FULL. The event is raised when the dirty ring
becomes soft full in kvm_dirty_ring_push(). The event is only cleared in
the check, done in the newly added helper kvm_dirty_ring_check_request().
Since the VCPU is not runnable when the dirty ring becomes soft full, the
KVM_REQ_DIRTY_RING_SOFT_FULL event is always set to prevent the VCPU from
running until the dirty pages are harvested and the dirty ring is reset by
userspace.
kvm_dirty_ring_soft_full() becomes a private function with the newly added
helper kvm_dirty_ring_check_request(). The alignment for the various event
definitions in kvm_host.h is changed to tab character by the way. In order
to avoid using 'container_of()', the argument @ring is replaced by @vcpu
in kvm_dirty_ring_push().
Link: https://lore.kernel.org/kvmarm/87lerkwtm5.wl-maz@kernel.org
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221110104914.31280-2-gshan@redhat.com
virt/kvm/irqchip.c is including "irq.h" from the arch-specific KVM source
directory (i.e. not from arch/*/include) for the sole purpose of retrieving
irqchip_in_kernel.
Making the function inline in a header that is already included,
such as asm/kvm_host.h, is not possible because it needs to look at
struct kvm which is defined after asm/kvm_host.h is included. So add a
kvm_arch_irqchip_in_kernel non-inline function; irqchip_in_kernel() is
only performance critical on arm64 and x86, and the non-inline function
is enough on all other architectures.
irq.h can then be deleted from all architectures except x86.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a new "interruptible" flag showing that the caller is willing to be
interrupted by signals during the __gfn_to_pfn_memslot() request. Wire it
up with a FOLL_INTERRUPTIBLE flag that we've just introduced.
This prepares KVM to be able to respond to SIGUSR1 (for QEMU that's the
SIGIPI) even during e.g. handling an userfaultfd page fault.
No functional change intended.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221011195809.557016-4-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a new pfn error to show that we've got a pending signal to handle
during hva_to_pfn_slow() procedure (of -EINTR retval).
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221011195809.557016-3-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Fix the pKVM stage-1 walker erronously using the stage-2 accessor
* Correctly convert vcpu->kvm to a hyp pointer when generating
an exception in a nVHE+MTE configuration
* Check that KVM_CAP_DIRTY_LOG_* are valid before enabling them
* Fix SMPRI_EL1/TPIDR2_EL0 trapping on VHE
* Document the boot requirements for FGT when entering the kernel
at EL1
There are two capabilities related to ring-based dirty page tracking:
KVM_CAP_DIRTY_LOG_RING and KVM_CAP_DIRTY_LOG_RING_ACQ_REL. Both are
supported by x86. However, arm64 supports KVM_CAP_DIRTY_LOG_RING_ACQ_REL
only when the feature is supported on arm64. The userspace doesn't have
to enable the advertised capability, meaning KVM_CAP_DIRTY_LOG_RING can
be enabled on arm64 by userspace and it's wrong.
Fix it by double checking if the capability has been advertised prior to
enabling it. It's rejected to enable the capability if it hasn't been
advertised.
Fixes: 17601bfed9 ("KVM: Add KVM_CAP_DIRTY_LOG_RING_ACQ_REL capability and config option")
Reported-by: Sean Christopherson <seanjc@google.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221031003621.164306-4-gshan@redhat.com
Reject kvm_gpc_check() and kvm_gpc_refresh() if the cache is inactive.
Not checking the active flag during refresh is particularly egregious, as
KVM can end up with a valid, inactive cache, which can lead to a variety
of use-after-free bugs, e.g. consuming a NULL kernel pointer or missing
an mmu_notifier invalidation due to the cache not being on the list of
gfns to invalidate.
Note, "active" needs to be set if and only if the cache is on the list
of caches, i.e. is reachable via mmu_notifier events. If a relevant
mmu_notifier event occurs while the cache is "active" but not on the
list, KVM will not acquire the cache's lock and so will not serailize
the mmu_notifier event with active users and/or kvm_gpc_refresh().
A race between KVM_XEN_ATTR_TYPE_SHARED_INFO and KVM_XEN_HVM_EVTCHN_SEND
can be exploited to trigger the bug.
1. Deactivate shinfo cache:
kvm_xen_hvm_set_attr
case KVM_XEN_ATTR_TYPE_SHARED_INFO
kvm_gpc_deactivate
kvm_gpc_unmap
gpc->valid = false
gpc->khva = NULL
gpc->active = false
Result: active = false, valid = false
2. Cause cache refresh:
kvm_arch_vm_ioctl
case KVM_XEN_HVM_EVTCHN_SEND
kvm_xen_hvm_evtchn_send
kvm_xen_set_evtchn
kvm_xen_set_evtchn_fast
kvm_gpc_check
return -EWOULDBLOCK because !gpc->valid
kvm_xen_set_evtchn_fast
return -EWOULDBLOCK
kvm_gpc_refresh
hva_to_pfn_retry
gpc->valid = true
gpc->khva = not NULL
Result: active = false, valid = true
3. Race ioctl KVM_XEN_HVM_EVTCHN_SEND against ioctl
KVM_XEN_ATTR_TYPE_SHARED_INFO:
kvm_arch_vm_ioctl
case KVM_XEN_HVM_EVTCHN_SEND
kvm_xen_hvm_evtchn_send
kvm_xen_set_evtchn
kvm_xen_set_evtchn_fast
read_lock gpc->lock
kvm_xen_hvm_set_attr case
KVM_XEN_ATTR_TYPE_SHARED_INFO
mutex_lock kvm->lock
kvm_xen_shared_info_init
kvm_gpc_activate
gpc->khva = NULL
kvm_gpc_check
[ Check passes because gpc->valid is
still true, even though gpc->khva
is already NULL. ]
shinfo = gpc->khva
pending_bits = shinfo->evtchn_pending
CRASH: test_and_set_bit(..., pending_bits)
Fixes: 982ed0de47 ("KVM: Reinstate gfn_to_pfn_cache with invalidation support")
Cc: stable@vger.kernel.org
Reported-by: : Michal Luczaj <mhal@rbox.co>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221013211234.1318131-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the gfn_to_pfn_cache lock initialization to another helper and
call the new helper during VM/vCPU creation. There are race
conditions possible due to kvm_gfn_to_pfn_cache_init()'s
ability to re-initialize the cache's locks.
For example: a race between ioctl(KVM_XEN_HVM_EVTCHN_SEND) and
kvm_gfn_to_pfn_cache_init() leads to a corrupted shinfo gpc lock.
(thread 1) | (thread 2)
|
kvm_xen_set_evtchn_fast |
read_lock_irqsave(&gpc->lock, ...) |
| kvm_gfn_to_pfn_cache_init
| rwlock_init(&gpc->lock)
read_unlock_irqrestore(&gpc->lock, ...) |
Rename "cache_init" and "cache_destroy" to activate+deactivate to
avoid implying that the cache really is destroyed/freed.
Note, there more races in the newly named kvm_gpc_activate() that will
be addressed separately.
Fixes: 982ed0de47 ("KVM: Reinstate gfn_to_pfn_cache with invalidation support")
Cc: stable@vger.kernel.org
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
[sean: call out that this is a bug fix]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221013211234.1318131-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Although simple_attr_open() fails only with -ENOMEM with current code
base, it would be nicer to return retval of simple_attr_open() directly
in kvm_debugfs_open().
No functional change intended.
Signed-off-by: Hou Wenlong <houwenlong.hwl@antgroup.com>
Message-Id: <69d64d93accd1f33691b8a383ae555baee80f943.1665975828.git.houwenlong.hwl@antgroup.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We will introduce the first architecture specific compat vm ioctl in the
next patch. Add all necessary boilerplate to allow architectures to
override compat vm ioctls when necessary.
Signed-off-by: Alexander Graf <graf@amazon.com>
Message-Id: <20221017184541.2658-2-graf@amazon.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Prune private items from vfio_pci_core.h to a new internal header,
fix missed function rename, and refactor vfio-pci interrupt defines.
(Jason Gunthorpe)
- Create consistent naming and handling of ioctls with a function per
ioctl for vfio-pci and vfio group handling, use proper type args
where available. (Jason Gunthorpe)
- Implement a set of low power device feature ioctls allowing userspace
to make use of power states such as D3cold where supported.
(Abhishek Sahu)
- Remove device counter on vfio groups, which had restricted the page
pinning interface to singleton groups to account for limitations in
the type1 IOMMU backend. Document usage as limited to emulated IOMMU
devices, ie. traditional mdev devices where this restriction is
consistent. (Jason Gunthorpe)
- Correct function prefix in hisi_acc driver incurred during previous
refactoring. (Shameer Kolothum)
- Correct typo and remove redundant warning triggers in vfio-fsl driver.
(Christophe JAILLET)
- Introduce device level DMA dirty tracking uAPI and implementation in
the mlx5 variant driver (Yishai Hadas & Joao Martins)
- Move much of the vfio_device life cycle management into vfio core,
simplifying and avoiding duplication across drivers. This also
facilitates adding a struct device to vfio_device which begins the
introduction of device rather than group level user support and fills
a gap allowing userspace identify devices as vfio capable without
implicit knowledge of the driver. (Kevin Tian & Yi Liu)
- Split vfio container handling to a separate file, creating a more
well defined API between the core and container code, masking IOMMU
backend implementation from the core, allowing for an easier future
transition to an iommufd based implementation of the same.
(Jason Gunthorpe)
- Attempt to resolve race accessing the iommu_group for a device
between vfio releasing DMA ownership and removal of the device from
the IOMMU driver. Follow-up with support to allow vfio_group to
exist with NULL iommu_group pointer to support existing userspace
use cases of holding the group file open. (Jason Gunthorpe)
- Fix error code and hi/lo register manipulation issues in the hisi_acc
variant driver, along with various code cleanups. (Longfang Liu)
- Fix a prior regression in GVT-g group teardown, resulting in
unreleased resources. (Jason Gunthorpe)
- A significant cleanup and simplification of the mdev interface,
consolidating much of the open coded per driver sysfs interface
support into the mdev core. (Christoph Hellwig)
- Simplification of tracking and locking around vfio_groups that
fall out from previous refactoring. (Jason Gunthorpe)
- Replace trivial open coded f_ops tests with new helper.
(Alex Williamson)
-----BEGIN PGP SIGNATURE-----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=Z8+P
-----END PGP SIGNATURE-----
Merge tag 'vfio-v6.1-rc1' of https://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- Prune private items from vfio_pci_core.h to a new internal header,
fix missed function rename, and refactor vfio-pci interrupt defines
(Jason Gunthorpe)
- Create consistent naming and handling of ioctls with a function per
ioctl for vfio-pci and vfio group handling, use proper type args
where available (Jason Gunthorpe)
- Implement a set of low power device feature ioctls allowing userspace
to make use of power states such as D3cold where supported (Abhishek
Sahu)
- Remove device counter on vfio groups, which had restricted the page
pinning interface to singleton groups to account for limitations in
the type1 IOMMU backend. Document usage as limited to emulated IOMMU
devices, ie. traditional mdev devices where this restriction is
consistent (Jason Gunthorpe)
- Correct function prefix in hisi_acc driver incurred during previous
refactoring (Shameer Kolothum)
- Correct typo and remove redundant warning triggers in vfio-fsl driver
(Christophe JAILLET)
- Introduce device level DMA dirty tracking uAPI and implementation in
the mlx5 variant driver (Yishai Hadas & Joao Martins)
- Move much of the vfio_device life cycle management into vfio core,
simplifying and avoiding duplication across drivers. This also
facilitates adding a struct device to vfio_device which begins the
introduction of device rather than group level user support and fills
a gap allowing userspace identify devices as vfio capable without
implicit knowledge of the driver (Kevin Tian & Yi Liu)
- Split vfio container handling to a separate file, creating a more
well defined API between the core and container code, masking IOMMU
backend implementation from the core, allowing for an easier future
transition to an iommufd based implementation of the same (Jason
Gunthorpe)
- Attempt to resolve race accessing the iommu_group for a device
between vfio releasing DMA ownership and removal of the device from
the IOMMU driver. Follow-up with support to allow vfio_group to exist
with NULL iommu_group pointer to support existing userspace use cases
of holding the group file open (Jason Gunthorpe)
- Fix error code and hi/lo register manipulation issues in the hisi_acc
variant driver, along with various code cleanups (Longfang Liu)
- Fix a prior regression in GVT-g group teardown, resulting in
unreleased resources (Jason Gunthorpe)
- A significant cleanup and simplification of the mdev interface,
consolidating much of the open coded per driver sysfs interface
support into the mdev core (Christoph Hellwig)
- Simplification of tracking and locking around vfio_groups that fall
out from previous refactoring (Jason Gunthorpe)
- Replace trivial open coded f_ops tests with new helper (Alex
Williamson)
* tag 'vfio-v6.1-rc1' of https://github.com/awilliam/linux-vfio: (77 commits)
vfio: More vfio_file_is_group() use cases
vfio: Make the group FD disassociate from the iommu_group
vfio: Hold a reference to the iommu_group in kvm for SPAPR
vfio: Add vfio_file_is_group()
vfio: Change vfio_group->group_rwsem to a mutex
vfio: Remove the vfio_group->users and users_comp
vfio/mdev: add mdev available instance checking to the core
vfio/mdev: consolidate all the description sysfs into the core code
vfio/mdev: consolidate all the available_instance sysfs into the core code
vfio/mdev: consolidate all the name sysfs into the core code
vfio/mdev: consolidate all the device_api sysfs into the core code
vfio/mdev: remove mtype_get_parent_dev
vfio/mdev: remove mdev_parent_dev
vfio/mdev: unexport mdev_bus_type
vfio/mdev: remove mdev_from_dev
vfio/mdev: simplify mdev_type handling
vfio/mdev: embedd struct mdev_parent in the parent data structure
vfio/mdev: make mdev.h standalone includable
drm/i915/gvt: simplify vgpu configuration management
drm/i915/gvt: fix a memory leak in intel_gvt_init_vgpu_types
...
SPAPR exists completely outside the normal iommu driver framework, the
groups it creates are fake and are only created to enable VFIO's uAPI.
Thus, it does not need to follow the iommu core rule that the iommu_group
will only be touched while a driver is attached.
Carry a group reference into KVM and have KVM directly manage the lifetime
of this object independently of VFIO. This means KVM no longer relies on
the vfio group file being valid to maintain the group reference.
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/2-v2-15417f29324e+1c-vfio_group_disassociate_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This replaces uses of vfio_file_iommu_group() which were only detecting if
the file is a VFIO file with no interest in the actual group.
The only remaning user of vfio_file_iommu_group() is in KVM for the SPAPR
stuff. It passes the iommu_group into the arch code through kvm for some
reason.
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1-v2-15417f29324e+1c-vfio_group_disassociate_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
- Fixes for single-stepping in the presence of an async
exception as well as the preservation of PSTATE.SS
- Better handling of AArch32 ID registers on AArch64-only
systems
- Fixes for the dirty-ring API, allowing it to work on
architectures with relaxed memory ordering
- Advertise the new kvmarm mailing list
- Various minor cleanups and spelling fixes
-----BEGIN PGP SIGNATURE-----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=aNPK
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for v6.1
- Fixes for single-stepping in the presence of an async
exception as well as the preservation of PSTATE.SS
- Better handling of AArch32 ID registers on AArch64-only
systems
- Fixes for the dirty-ring API, allowing it to work on
architectures with relaxed memory ordering
- Advertise the new kvmarm mailing list
- Various minor cleanups and spelling fixes
In order to differenciate between architectures that require no extra
synchronisation when accessing the dirty ring and those who do,
add a new capability (KVM_CAP_DIRTY_LOG_RING_ACQ_REL) that identify
the latter sort. TSO architectures can obviously advertise both, while
relaxed architectures must only advertise the ACQ_REL version.
This requires some configuration symbol rejigging, with HAVE_KVM_DIRTY_RING
being only indirectly selected by two top-level config symbols:
- HAVE_KVM_DIRTY_RING_TSO for strongly ordered architectures (x86)
- HAVE_KVM_DIRTY_RING_ACQ_REL for weakly ordered architectures (arm64)
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20220926145120.27974-3-maz@kernel.org
The current implementation of the dirty ring has an implicit requirement
that stores to the dirty ring from userspace must be:
- be ordered with one another
- visible from another CPU executing a ring reset
While these implicit requirements work well for x86 (and any other
TSO-like architecture), they do not work for more relaxed architectures
such as arm64 where stores to different addresses can be freely
reordered, and loads from these addresses not observing writes from
another CPU unless the required barriers (or acquire/release semantics)
are used.
In order to start fixing this, upgrade the ring reset accesses:
- the kvm_dirty_gfn_harvested() helper now uses acquire semantics
so it is ordered after all previous writes, including that from
userspace
- the kvm_dirty_gfn_set_invalid() helper now uses release semantics
so that the next_slot and next_offset reads don't drift past
the entry invalidation
This is only a partial fix as the userspace side also need upgrading.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20220926145120.27974-2-maz@kernel.org
KVM_REQ_UNHALT is now unnecessary because it is replaced by the return
value of kvm_vcpu_block/kvm_vcpu_halt. Remove it.
No functional change intended.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Message-Id: <20220921003201.1441511-13-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When alloc_cpumask_var_node() fails for a certain cpu, there might be some
allocated cpumasks for percpu cpu_kick_mask. We should free these cpumasks
or memoryleak will occur.
Fixes: baff59ccdc ("KVM: Pre-allocate cpumasks for kvm_make_all_cpus_request_except()")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Link: https://lore.kernel.org/r/20220823063414.59778-1-linmiaohe@huawei.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The variable is initialized but it is only used after its assignment.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Li kunyu <kunyu@nfschina.com>
Message-Id: <20220819021535.483702-1-kunyu@nfschina.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The variable is initialized but it is only used after its assignment.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Li kunyu <kunyu@nfschina.com>
Message-Id: <20220819022804.483914-1-kunyu@nfschina.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The motivation of this renaming is to make these variables and related
helper functions less mmu_notifier bound and can also be used for non
mmu_notifier based page invalidation. mmu_invalidate_* was chosen to
better describe the purpose of 'invalidating' a page that those
variables are used for.
- mmu_notifier_seq/range_start/range_end are renamed to
mmu_invalidate_seq/range_start/range_end.
- mmu_notifier_retry{_hva} helper functions are renamed to
mmu_invalidate_retry{_hva}.
- mmu_notifier_count is renamed to mmu_invalidate_in_progress to
avoid confusion with mn_active_invalidate_count.
- While here, also update kvm_inc/dec_notifier_count() to
kvm_mmu_invalidate_begin/end() to match the change for
mmu_notifier_count.
No functional change intended.
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Message-Id: <20220816125322.1110439-3-chao.p.peng@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Invoke kvm_coalesced_mmio_init() from kvm_create_vm() now that allocating
and initializing coalesced MMIO objects is separate from registering any
associated devices. Moving coalesced MMIO cleans up the last oddity
where KVM does VM creation/initialization after kvm_create_vm(), and more
importantly after kvm_arch_post_init_vm() is called and the VM is added
to the global vm_list, i.e. after the VM is fully created as far as KVM
is concerned.
Originally, kvm_coalesced_mmio_init() was called by kvm_create_vm(), but
the original implementation was completely devoid of error handling.
Commit 6ce5a090a9 ("KVM: coalesced_mmio: fix kvm_coalesced_mmio_init()'s
error handling" fixed the various bugs, and in doing so rightly moved the
call to after kvm_create_vm() because kvm_coalesced_mmio_init() also
registered the coalesced MMIO device. Commit 2b3c246a68 ("KVM: Make
coalesced mmio use a device per zone") cleaned up that mess by having
each zone register a separate device, i.e. moved device registration to
its logical home in kvm_vm_ioctl_register_coalesced_mmio(). As a result,
kvm_coalesced_mmio_init() is now a "pure" initialization helper and can
be safely called from kvm_create_vm().
Opportunstically drop the #ifdef, KVM provides stubs for
kvm_coalesced_mmio_{init,free}() when CONFIG_KVM_MMIO=n (s390).
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220816053937.2477106-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Unconditionally get a reference to the /dev/kvm module when creating a VM
instead of using try_get_module(), which will fail if the module is in
the process of being forcefully unloaded. The error handling when
try_get_module() fails doesn't properly unwind all that has been done,
e.g. doesn't call kvm_arch_pre_destroy_vm() and doesn't remove the VM
from the global list. Not removing VMs from the global list tends to be
fatal, e.g. leads to use-after-free explosions.
The obvious alternative would be to add proper unwinding, but the
justification for using try_get_module(), "rmmod --wait", is completely
bogus as support for "rmmod --wait", i.e. delete_module() without
O_NONBLOCK, was removed by commit 3f2b9c9cdf ("module: remove rmmod
--wait option.") nearly a decade ago.
It's still possible for try_get_module() to fail due to the module dying
(more like being killed), as the module will be tagged MODULE_STATE_GOING
by "rmmod --force", i.e. delete_module(..., O_TRUNC), but playing nice
with forced unloading is an exercise in futility and gives a falsea sense
of security. Using try_get_module() only prevents acquiring _new_
references, it doesn't magically put the references held by other VMs,
and forced unloading doesn't wait, i.e. "rmmod --force" on KVM is all but
guaranteed to cause spectacular fireworks; the window where KVM will fail
try_get_module() is tiny compared to the window where KVM is building and
running the VM with an elevated module refcount.
Addressing KVM's inability to play nice with "rmmod --force" is firmly
out-of-scope. Forcefully unloading any module taints kernel (for obvious
reasons) _and_ requires the kernel to be built with
CONFIG_MODULE_FORCE_UNLOAD=y, which is off by default and comes with the
amusing disclaimer that it's "mainly for kernel developers and desperate
users". In other words, KVM is free to scoff at bug reports due to using
"rmmod --force" while VMs may be running.
Fixes: 5f6de5cbeb ("KVM: Prevent module exit until all VMs are freed")
Cc: stable@vger.kernel.org
Cc: David Matlack <dmatlack@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220816053937.2477106-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Properly unwind VM creation if kvm_create_vm_debugfs() fails. A recent
change to invoke kvm_create_vm_debug() in kvm_create_vm() was led astray
by buggy try_get_module() handling adding by commit 5f6de5cbeb ("KVM:
Prevent module exit until all VMs are freed"). The debugfs error path
effectively inherits the bad error path of try_module_get(), e.g. KVM
leaves the to-be-free VM on vm_list even though KVM appears to do the
right thing by calling module_put() and falling through.
Opportunistically hoist kvm_create_vm_debugfs() above the call to
kvm_arch_post_init_vm() so that the "post-init" arch hook is actually
invoked after the VM is initialized (ignoring kvm_coalesced_mmio_init()
for the moment). x86 is the only non-nop implementation of the post-init
hook, and it doesn't allocate/initialize any objects that are reachable
via debugfs code (spawns a kthread worker for the NX huge page mitigation).
Leave the buggy try_get_module() alone for now, it will be fixed in a
separate commit.
Fixes: b74ed7a68e ("KVM: Actually create debugfs in kvm_create_vm()")
Reported-by: syzbot+744e173caec2e1627ee0@syzkaller.appspotmail.com
Cc: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Message-Id: <20220816053937.2477106-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Doing debugfs creation after vm creation leaves things in a
quasi-initialized state for a while. This is further complicated by the
fact that we tear down debugfs from kvm_destroy_vm(). Align debugfs and
stats init/destroy with the vm init/destroy pattern to avoid any
headaches.
Note the fix for a benign mistake in error handling for calls to
kvm_arch_create_vm_debugfs() rolled in. Since all implementations of
the function return 0 unconditionally it isn't actually a bug at
the moment.
Lastly, tear down debugfs/stats data in the kvm_create_vm_debugfs()
error path. Previously it was safe to assume that kvm_destroy_vm() would
take out the garbage, that is no longer the case.
Signed-off-by: Oliver Upton <oupton@google.com>
Message-Id: <20220720092259.3491733-6-oliver.upton@linux.dev>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
At the time the VM fd is used in kvm_create_vm_debugfs(), the fd has
been allocated but not yet installed. It is only really useful as an
identifier in strings for the VM (such as debugfs).
Treat it exactly as such by passing the string name of the fd to
kvm_create_vm_debugfs(), futureproofing against possible misuse of the
VM fd.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Message-Id: <20220720092259.3491733-5-oliver.upton@linux.dev>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allocate a VM's fd at the very beginning of kvm_dev_ioctl_create_vm() so
that KVM can use the fd value to generate strigns, e.g. for debugfs,
when creating and initializing the VM.
Signed-off-by: Oliver Upton <oupton@google.com>
Message-Id: <20220720092259.3491733-4-oliver.upton@linux.dev>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Initialize stats_id alongside other kvm_vcpu fields to make it more
difficult to unintentionally access stats_id before it's set.
No functional change intended.
Signed-off-by: Oliver Upton <oupton@google.com>
Message-Id: <20220720092259.3491733-3-oliver.upton@linux.dev>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Initialize stats_id alongside other struct kvm fields to make it more
difficult to unintentionally access stats_id before it's set. While at
it, move the format string to the first line of the call and fix the
indentation of the second line.
No functional change intended.
Signed-off-by: Oliver Upton <oupton@google.com>
Message-Id: <20220720092259.3491733-2-oliver.upton@linux.dev>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM/s390, KVM/x86 and common infrastructure changes for 5.20
x86:
* Permit guests to ignore single-bit ECC errors
* Fix races in gfn->pfn cache refresh; do not pin pages tracked by the cache
* Intel IPI virtualization
* Allow getting/setting pending triple fault with KVM_GET/SET_VCPU_EVENTS
* PEBS virtualization
* Simplify PMU emulation by just using PERF_TYPE_RAW events
* More accurate event reinjection on SVM (avoid retrying instructions)
* Allow getting/setting the state of the speaker port data bit
* Refuse starting the kvm-intel module if VM-Entry/VM-Exit controls are inconsistent
* "Notify" VM exit (detect microarchitectural hangs) for Intel
* Cleanups for MCE MSR emulation
s390:
* add an interface to provide a hypervisor dump for secure guests
* improve selftests to use TAP interface
* enable interpretive execution of zPCI instructions (for PCI passthrough)
* First part of deferred teardown
* CPU Topology
* PV attestation
* Minor fixes
Generic:
* new selftests API using struct kvm_vcpu instead of a (vm, id) tuple
x86:
* Use try_cmpxchg64 instead of cmpxchg64
* Bugfixes
* Ignore benign host accesses to PMU MSRs when PMU is disabled
* Allow disabling KVM's "MONITOR/MWAIT are NOPs!" behavior
* x86/MMU: Allow NX huge pages to be disabled on a per-vm basis
* Port eager page splitting to shadow MMU as well
* Enable CMCI capability by default and handle injected UCNA errors
* Expose pid of vcpu threads in debugfs
* x2AVIC support for AMD
* cleanup PIO emulation
* Fixes for LLDT/LTR emulation
* Don't require refcounted "struct page" to create huge SPTEs
x86 cleanups:
* Use separate namespaces for guest PTEs and shadow PTEs bitmasks
* PIO emulation
* Reorganize rmap API, mostly around rmap destruction
* Do not workaround very old KVM bugs for L0 that runs with nesting enabled
* new selftests API for CPUID
The kvm_mmu_topup_memory_cache() always uses GFP_KERNEL_ACCOUNT for
memory allocation which prevents it's use in atomic context. To address
this limitation of kvm_mmu_topup_memory_cache(), we add gfp_custom flag
in struct kvm_mmu_memory_cache. When the gfp_custom flag is set to some
GFP_xyz flags, the kvm_mmu_topup_memory_cache() will use that instead of
GFP_KERNEL_ACCOUNT.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Add a new debugfs file to expose the pid of each vcpu threads. This
is very helpful for userland tools to get the vcpu pids without
worrying about thread naming conventions of the VMM.
Signed-off-by: Vineeth Pillai (Google) <vineeth@bitbyteword.org>
Message-Id: <20220523190327.2658-1-vineeth@bitbyteword.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allow the capacity of the kvm_mmu_memory_cache struct to be chosen at
declaration time rather than being fixed for all declarations. This will
be used in a follow-up commit to declare an cache in x86 with a capacity
of 512+ objects without having to increase the capacity of all caches in
KVM.
This change requires each cache now specify its capacity at runtime,
since the cache struct itself no longer has a fixed capacity known at
compile time. To protect against someone accidentally defining a
kvm_mmu_memory_cache struct directly (without the extra storage), this
commit includes a WARN_ON() in kvm_mmu_topup_memory_cache().
In order to support different capacities, this commit changes the
objects pointer array to be dynamically allocated the first time the
cache is topped-up.
While here, opportunistically clean up the stack-allocated
kvm_mmu_memory_cache structs in riscv and arm64 to use designated
initializers.
No functional change intended.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220516232138.1783324-22-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop the unnecessary initialization of the local 'pfn' variable in
hva_to_pfn(). First and foremost, '0' is not an invalid pfn, it's a
perfectly valid pfn on most architectures. I.e. if hva_to_pfn() were to
return an "uninitializd" pfn, it would actually be interpeted as a legal
pfn by most callers.
Second, hva_to_pfn() can't return an uninitialized pfn as hva_to_pfn()
explicitly sets pfn to an error value (or returns an error value directly)
if a helper returns failure, and all helpers set the pfn on success.
The zeroing of 'pfn' was introduced by commit 2fc843117d ("KVM:
reorganize hva_to_pfn"), probably to avoid "uninitialized variable"
warnings on statements that return pfn. However, no compiler seems
to produce them, making the initialization unnecessary.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220429010416.2788472-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename and refactor kvm_is_reserved_pfn() to kvm_pfn_to_refcounted_page()
to better reflect what KVM is actually checking, and to eliminate extra
pfn_to_page() lookups. The kvm_release_pfn_*() an kvm_try_get_pfn()
helpers in particular benefit from "refouncted" nomenclature, as it's not
all that obvious why KVM needs to get/put refcounts for some PG_reserved
pages (ZERO_PAGE and ZONE_DEVICE).
Add a comment to call out that the list of exceptions to PG_reserved is
all but guaranteed to be incomplete. The list has mostly been compiled
by people throwing noodles at KVM and finding out they stick a little too
well, e.g. the ZERO_PAGE's refcount overflowed and ZONE_DEVICE pages
didn't get freed.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220429010416.2788472-10-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Operate on a 'struct page' instead of a pfn when checking if a page is a
ZONE_DEVICE page, and rename the helper accordingly. Generally speaking,
KVM doesn't actually care about ZONE_DEVICE memory, i.e. shouldn't do
anything special for ZONE_DEVICE memory. Rather, KVM wants to treat
ZONE_DEVICE memory like regular memory, and the need to identify
ZONE_DEVICE memory only arises as an exception to PG_reserved pages. In
other words, KVM should only ever check for ZONE_DEVICE memory after KVM
has already verified that there is a struct page associated with the pfn.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220429010416.2788472-9-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop helpers to convert a gfn/gpa to a 'struct page' in the context of a
vCPU. KVM doesn't require that guests be backed by 'struct page' memory,
thus any use of helpers that assume 'struct page' is bound to be flawed,
as was the case for the recently removed last user in x86's nested VMX.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220429010416.2788472-8-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop a WARN_ON() if kvm_pfn_to_page() encounters a "reserved" pfn, which
in this context means a struct page that has PG_reserved but is not a/the
ZERO_PAGE and is not a ZONE_DEVICE page. The usage, via gfn_to_page(),
in x86 is safe as gfn_to_page() is used only to retrieve a page from
KVM-controlled memslot, but the usage in PPC and s390 operates on
arbitrary gfns and thus memslots that can be backed by incompatible
memory.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220429010416.2788472-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Invert the order of KVM's page/pfn release helpers so that the "inner"
helper operates on a page instead of a pfn. As pointed out by Linus[*],
converting between struct page and a pfn isn't necessarily cheap, and
that's not even counting the overhead of is_error_noslot_pfn() and
kvm_is_reserved_pfn(). Even if the checks were dirt cheap, there's no
reason to convert from a page to a pfn and back to a page, just to mark
the page dirty/accessed or to put a reference to the page.
Opportunistically drop a stale declaration of kvm_set_page_accessed()
from kvm_host.h (there was no implementation).
No functional change intended.
[*] https://lore.kernel.org/all/CAHk-=wifQimj2d6npq-wCi5onYPjzQg4vyO4tFcPJJZr268cRw@mail.gmail.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220429010416.2788472-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Don't set Accessed/Dirty bits for a struct page with PG_reserved set,
i.e. don't set A/D bits for the ZERO_PAGE. The ZERO_PAGE (or pages
depending on the architecture) should obviously never be written, and
similarly there's no point in marking it accessed as the page will never
be swapped out or reclaimed. The comment in page-flags.h is quite clear
that PG_reserved pages should be managed only by their owner, and
strictly following that mandate also simplifies KVM's logic.
Fixes: 7df003c852 ("KVM: fix overflow of zero page refcount with ksm running")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220429010416.2788472-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove a check from kvm_release_pfn() to bail if the provided @pfn is
zero. Zero is a perfectly valid pfn on most architectures, and should
not be used to indicate an error or an invalid pfn. The bogus check was
added by commit 917248144d ("x86/kvm: Cache gfn to pfn translation"),
which also did the bad thing of zeroing the pfn and gfn to mark a cache
invalid. Thankfully, that bad behavior was axed by commit 357a18ad23
("KVM: Kill kvm_map_gfn() / kvm_unmap_gfn() and gfn_to_pfn_cache").
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220429010416.2788472-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make it use the same verb as in kvm_kick_many_cpus().
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Message-Id: <20220605063417.308311-5-jiangshanlai@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
s390:
* add an interface to provide a hypervisor dump for secure guests
* improve selftests to show tests
x86:
* Intel IPI virtualization
* Allow getting/setting pending triple fault with KVM_GET/SET_VCPU_EVENTS
* PEBS virtualization
* Simplify PMU emulation by just using PERF_TYPE_RAW events
* More accurate event reinjection on SVM (avoid retrying instructions)
* Allow getting/setting the state of the speaker port data bit
* Rewrite gfn-pfn cache refresh
* Refuse starting the module if VM-Entry/VM-Exit controls are inconsistent
* "Notify" VM exit
On SVM, if preemption happens right after the call to finish_rcuwait
but before call to kvm_arch_vcpu_unblocking on SVM/AVIC, it itself
will re-enable AVIC, and then we will try to re-enable it again
in kvm_arch_vcpu_unblocking which will lead to a warning
in __avic_vcpu_load.
The same problem can happen if the vCPU is preempted right after the call
to kvm_arch_vcpu_blocking but before the call to prepare_to_rcuwait
and in this case, we will end up with AVIC enabled during sleep -
Ooops.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220606180829.102503-7-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_arch_vcpu_precreate() targets to handle arch specific VM resource
to be prepared prior to the actual creation of vCPU. For example, x86
platform may need do per-VM allocation based on max_vcpu_ids at the
first vCPU creation. It probably leads to concurrency control on this
allocation as multiple vCPU creation could happen simultaneously. From
the architectual point of view, it's necessary to execute
kvm_arch_vcpu_precreate() under protect of kvm->lock.
Currently only arm64, x86 and s390 have non-nop implementations at the
stage of vCPU pre-creation. Remove the lock acquiring in s390's design
and make sure all architecture can run kvm_arch_vcpu_precreate() safely
under kvm->lock without recrusive lock issue.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Zeng Guang <guang.zeng@intel.com>
Message-Id: <20220419154409.11842-1-guang.zeng@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A KVM device cleanup happens in either of two callbacks:
1) destroy() which is called when the VM is being destroyed;
2) release() which is called when a device fd is closed.
Most KVM devices use 1) but Book3s's interrupt controller KVM devices
(XICS, XIVE, XIVE-native) use 2) as they need to close and reopen during
the machine execution. The error handling in kvm_ioctl_create_device()
assumes destroy() is always defined which leads to NULL dereference as
discovered by Syzkaller.
This adds a checks for destroy!=NULL and adds a missing release().
This is not changing kvm_destroy_devices() as devices with defined
release() should have been removed from the KVM devices list by then.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Improvements to mlx5 vfio-pci variant driver, including support
for parallel migration per PF (Yishai Hadas)
- Remove redundant iommu_present() check (Robin Murphy)
- Ongoing refactoring to consolidate the VFIO driver facing API
to use vfio_device (Jason Gunthorpe)
- Use drvdata to store vfio_device among all vfio-pci and variant
drivers (Jason Gunthorpe)
- Remove redundant code now that IOMMU core manages group DMA
ownership (Jason Gunthorpe)
- Remove vfio_group from external API handling struct file ownership
(Jason Gunthorpe)
- Correct typo in uapi comments (Thomas Huth)
- Fix coccicheck detected deadlock (Wan Jiabing)
- Use rwsem to remove races and simplify code around container and
kvm association to groups (Jason Gunthorpe)
- Harden access to devices in low power states and use runtime PM to
enable d3cold support for unused devices (Abhishek Sahu)
- Fix dma_owner handling of fake IOMMU groups (Jason Gunthorpe)
- Set driver_managed_dma on vfio-pci variant drivers (Jason Gunthorpe)
- Pass KVM pointer directly rather than via notifier (Matthew Rosato)
-----BEGIN PGP SIGNATURE-----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=etEI
-----END PGP SIGNATURE-----
Merge tag 'vfio-v5.19-rc1' of https://github.com/awilliam/linux-vfio
Pull vfio updates from Alex Williamson:
- Improvements to mlx5 vfio-pci variant driver, including support for
parallel migration per PF (Yishai Hadas)
- Remove redundant iommu_present() check (Robin Murphy)
- Ongoing refactoring to consolidate the VFIO driver facing API to use
vfio_device (Jason Gunthorpe)
- Use drvdata to store vfio_device among all vfio-pci and variant
drivers (Jason Gunthorpe)
- Remove redundant code now that IOMMU core manages group DMA ownership
(Jason Gunthorpe)
- Remove vfio_group from external API handling struct file ownership
(Jason Gunthorpe)
- Correct typo in uapi comments (Thomas Huth)
- Fix coccicheck detected deadlock (Wan Jiabing)
- Use rwsem to remove races and simplify code around container and kvm
association to groups (Jason Gunthorpe)
- Harden access to devices in low power states and use runtime PM to
enable d3cold support for unused devices (Abhishek Sahu)
- Fix dma_owner handling of fake IOMMU groups (Jason Gunthorpe)
- Set driver_managed_dma on vfio-pci variant drivers (Jason Gunthorpe)
- Pass KVM pointer directly rather than via notifier (Matthew Rosato)
* tag 'vfio-v5.19-rc1' of https://github.com/awilliam/linux-vfio: (38 commits)
vfio: remove VFIO_GROUP_NOTIFY_SET_KVM
vfio/pci: Add driver_managed_dma to the new vfio_pci drivers
vfio: Do not manipulate iommu dma_owner for fake iommu groups
vfio/pci: Move the unused device into low power state with runtime PM
vfio/pci: Virtualize PME related registers bits and initialize to zero
vfio/pci: Change the PF power state to D0 before enabling VFs
vfio/pci: Invalidate mmaps and block the access in D3hot power state
vfio: Change struct vfio_group::container_users to a non-atomic int
vfio: Simplify the life cycle of the group FD
vfio: Fully lock struct vfio_group::container
vfio: Split up vfio_group_get_device_fd()
vfio: Change struct vfio_group::opened from an atomic to bool
vfio: Add missing locking for struct vfio_group::kvm
kvm/vfio: Fix potential deadlock problem in vfio
include/uapi/linux/vfio.h: Fix trivial typo - _IORW should be _IOWR instead
vfio/pci: Use the struct file as the handle not the vfio_group
kvm/vfio: Remove vfio_group from kvm
vfio: Change vfio_group_set_kvm() to vfio_file_set_kvm()
vfio: Change vfio_external_check_extension() to vfio_file_enforced_coherent()
vfio: Remove vfio_external_group_match_file()
...
* ultravisor communication device driver
* fix TEID on terminating storage key ops
RISC-V:
* Added Sv57x4 support for G-stage page table
* Added range based local HFENCE functions
* Added remote HFENCE functions based on VCPU requests
* Added ISA extension registers in ONE_REG interface
* Updated KVM RISC-V maintainers entry to cover selftests support
ARM:
* Add support for the ARMv8.6 WFxT extension
* Guard pages for the EL2 stacks
* Trap and emulate AArch32 ID registers to hide unsupported features
* Ability to select and save/restore the set of hypercalls exposed
to the guest
* Support for PSCI-initiated suspend in collaboration with userspace
* GICv3 register-based LPI invalidation support
* Move host PMU event merging into the vcpu data structure
* GICv3 ITS save/restore fixes
* The usual set of small-scale cleanups and fixes
x86:
* New ioctls to get/set TSC frequency for a whole VM
* Allow userspace to opt out of hypercall patching
* Only do MSR filtering for MSRs accessed by rdmsr/wrmsr
AMD SEV improvements:
* Add KVM_EXIT_SHUTDOWN metadata for SEV-ES
* V_TSC_AUX support
Nested virtualization improvements for AMD:
* Support for "nested nested" optimizations (nested vVMLOAD/VMSAVE,
nested vGIF)
* Allow AVIC to co-exist with a nested guest running
* Fixes for LBR virtualizations when a nested guest is running,
and nested LBR virtualization support
* PAUSE filtering for nested hypervisors
Guest support:
* Decoupling of vcpu_is_preempted from PV spinlocks
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmKN9M4UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNLeAf+KizAlQwxEehHHeNyTkZuKyMawrD6
zsqAENR6i1TxiXe7fDfPFbO2NR0ZulQopHbD9mwnHJ+nNw0J4UT7g3ii1IAVcXPu
rQNRGMVWiu54jt+lep8/gDg0JvPGKVVKLhxUaU1kdWT9PhIOC6lwpP3vmeWkUfRi
PFL/TMT0M8Nfryi0zHB0tXeqg41BiXfqO8wMySfBAHUbpv8D53D2eXQL6YlMM0pL
2quB1HxHnpueE5vj3WEPQ3PCdy1M2MTfCDBJAbZGG78Ljx45FxSGoQcmiBpPnhJr
C6UGP4ZDWpml5YULUoA70k5ylCbP+vI61U4vUtzEiOjHugpPV5wFKtx5nw==
=ozWx
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"S390:
- ultravisor communication device driver
- fix TEID on terminating storage key ops
RISC-V:
- Added Sv57x4 support for G-stage page table
- Added range based local HFENCE functions
- Added remote HFENCE functions based on VCPU requests
- Added ISA extension registers in ONE_REG interface
- Updated KVM RISC-V maintainers entry to cover selftests support
ARM:
- Add support for the ARMv8.6 WFxT extension
- Guard pages for the EL2 stacks
- Trap and emulate AArch32 ID registers to hide unsupported features
- Ability to select and save/restore the set of hypercalls exposed to
the guest
- Support for PSCI-initiated suspend in collaboration with userspace
- GICv3 register-based LPI invalidation support
- Move host PMU event merging into the vcpu data structure
- GICv3 ITS save/restore fixes
- The usual set of small-scale cleanups and fixes
x86:
- New ioctls to get/set TSC frequency for a whole VM
- Allow userspace to opt out of hypercall patching
- Only do MSR filtering for MSRs accessed by rdmsr/wrmsr
AMD SEV improvements:
- Add KVM_EXIT_SHUTDOWN metadata for SEV-ES
- V_TSC_AUX support
Nested virtualization improvements for AMD:
- Support for "nested nested" optimizations (nested vVMLOAD/VMSAVE,
nested vGIF)
- Allow AVIC to co-exist with a nested guest running
- Fixes for LBR virtualizations when a nested guest is running, and
nested LBR virtualization support
- PAUSE filtering for nested hypervisors
Guest support:
- Decoupling of vcpu_is_preempted from PV spinlocks"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (199 commits)
KVM: x86: Fix the intel_pt PMI handling wrongly considered from guest
KVM: selftests: x86: Sync the new name of the test case to .gitignore
Documentation: kvm: reorder ARM-specific section about KVM_SYSTEM_EVENT_SUSPEND
x86, kvm: use correct GFP flags for preemption disabled
KVM: LAPIC: Drop pending LAPIC timer injection when canceling the timer
x86/kvm: Alloc dummy async #PF token outside of raw spinlock
KVM: x86: avoid calling x86 emulator without a decoded instruction
KVM: SVM: Use kzalloc for sev ioctl interfaces to prevent kernel data leak
x86/fpu: KVM: Set the base guest FPU uABI size to sizeof(struct kvm_xsave)
s390/uv_uapi: depend on CONFIG_S390
KVM: selftests: x86: Fix test failure on arch lbr capable platforms
KVM: LAPIC: Trace LAPIC timer expiration on every vmentry
KVM: s390: selftest: Test suppression indication on key prot exception
KVM: s390: Don't indicate suppression on dirtying, failing memop
selftests: drivers/s390x: Add uvdevice tests
drivers/s390/char: Add Ultravisor io device
MAINTAINERS: Update KVM RISC-V entry to cover selftests support
RISC-V: KVM: Introduce ISA extension register
RISC-V: KVM: Cleanup stale TLB entries when host CPU changes
RISC-V: KVM: Add remote HFENCE functions based on VCPU requests
...
Put the reference to any struct page mapped/tracked by a gfn=>pfn cache
upon inserting the pfn into its associated cache, as opposed to putting
the reference only when the cache is done using the pfn. In other words,
don't pin pages while they're in the cache. One of the major roles of
the gfn=>pfn cache is to play nicely with invalidation events, i.e. it
exists in large part so that KVM doesn't rely on pinning pages.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220429210025.3293691-9-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rework the gfn=>pfn cache (gpc) refresh logic to address multiple races
between the cache itself, and between the cache and mmu_notifier events.
The existing refresh code attempts to guard against races with the
mmu_notifier by speculatively marking the cache valid, and then marking
it invalid if a mmu_notifier invalidation occurs. That handles the case
where an invalidation occurs between dropping and re-acquiring gpc->lock,
but it doesn't handle the scenario where the cache is refreshed after the
cache was invalidated by the notifier, but before the notifier elevates
mmu_notifier_count. The gpc refresh can't use the "retry" helper as its
invalidation occurs _before_ mmu_notifier_count is elevated and before
mmu_notifier_range_start is set/updated.
CPU0 CPU1
---- ----
gfn_to_pfn_cache_invalidate_start()
|
-> gpc->valid = false;
kvm_gfn_to_pfn_cache_refresh()
|
|-> gpc->valid = true;
hva_to_pfn_retry()
|
-> acquire kvm->mmu_lock
kvm->mmu_notifier_count == 0
mmu_seq == kvm->mmu_notifier_seq
drop kvm->mmu_lock
return pfn 'X'
acquire kvm->mmu_lock
kvm_inc_notifier_count()
drop kvm->mmu_lock()
kernel frees pfn 'X'
kvm_gfn_to_pfn_cache_check()
|
|-> gpc->valid == true
caller accesses freed pfn 'X'
Key off of mn_active_invalidate_count to detect that a pfncache refresh
needs to wait for an in-progress mmu_notifier invalidation. While
mn_active_invalidate_count is not guaranteed to be stable, it is
guaranteed to be elevated prior to an invalidation acquiring gpc->lock,
so either the refresh will see an active invalidation and wait, or the
invalidation will run after the refresh completes.
Speculatively marking the cache valid is itself flawed, as a concurrent
kvm_gfn_to_pfn_cache_check() would see a valid cache with stale pfn/khva
values. The KVM Xen use case explicitly allows/wants multiple users;
even though the caches are allocated per vCPU, __kvm_xen_has_interrupt()
can read a different vCPU (or vCPUs). Address this race by invalidating
the cache prior to dropping gpc->lock (this is made possible by fixing
the above mmu_notifier race).
Complicating all of this is the fact that both the hva=>pfn resolution
and mapping of the kernel address can sleep, i.e. must be done outside
of gpc->lock.
Fix the above races in one fell swoop, trying to fix each individual race
is largely pointless and essentially impossible to test, e.g. closing one
hole just shifts the focus to the other hole.
Fixes: 982ed0de47 ("KVM: Reinstate gfn_to_pfn_cache with invalidation support")
Cc: stable@vger.kernel.org
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Mingwei Zhang <mizhang@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220429210025.3293691-8-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Protect gfn=>pfn cache refresh with a mutex to fully serialize refreshes.
The refresh logic doesn't protect against
- concurrent unmaps, or refreshes with different GPAs (which may or may not
happen in practice, for example if a cache is only used under vcpu->mutex;
but it's allowed in the code)
- a false negative on the memslot generation. If the first refresh sees
a stale memslot generation, it will refresh the hva and generation before
moving on to the hva=>pfn translation. If it then drops gpc->lock, a
different user of the cache can come along, acquire gpc->lock, see that
the memslot generation is fresh, and skip the hva=>pfn update due to the
userspace address also matching (because it too was updated).
The refresh path can already sleep during hva=>pfn resolution, so wrap
the refresh with a mutex to ensure that any given refresh runs to
completion before other callers can start their refresh.
Cc: stable@vger.kernel.org
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220429210025.3293691-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Don't adjust the userspace address in the gfn=>pfn cache by the page
offset from the gpa. KVM should never use the user address directly, and
all KVM operations that translate a user address to something else
require the user address to be page aligned. Ignoring the offset will
allow the cache to reuse a gfn=>hva translation in the unlikely event
that the page offset of the gpa changes, but the gfn does not. And more
importantly, not having to (un)adjust the user address will simplify a
future bug fix.
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220429210025.3293691-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Put the struct page reference to pfn acquired by hva_to_pfn() when the
old and new pfns for a gfn=>pfn cache match. The cache already has a
reference via the old/current pfn, and will only put one reference when
the cache is done with the pfn.
Fixes: 982ed0de47 ("KVM: Reinstate gfn_to_pfn_cache with invalidation support")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220429210025.3293691-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop the @pga param from __release_gpc() and rename the helper to make it
more obvious that the cache itself is not being released. The helper
will be reused by a future commit to release a pfn+khva combination that
is _never_ associated with the cache, at which point the current name
would go from slightly misleading to blatantly wrong.
No functional change intended.
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220429210025.3293691-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Add support for the ARMv8.6 WFxT extension
- Guard pages for the EL2 stacks
- Trap and emulate AArch32 ID registers to hide unsupported features
- Ability to select and save/restore the set of hypercalls exposed
to the guest
- Support for PSCI-initiated suspend in collaboration with userspace
- GICv3 register-based LPI invalidation support
- Move host PMU event merging into the vcpu data structure
- GICv3 ITS save/restore fixes
- The usual set of small-scale cleanups and fixes
-----BEGIN PGP SIGNATURE-----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=mh7W
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 5.19
- Add support for the ARMv8.6 WFxT extension
- Guard pages for the EL2 stacks
- Trap and emulate AArch32 ID registers to hide unsupported features
- Ability to select and save/restore the set of hypercalls exposed
to the guest
- Support for PSCI-initiated suspend in collaboration with userspace
- GICv3 register-based LPI invalidation support
- Move host PMU event merging into the vcpu data structure
- GICv3 ITS save/restore fixes
- The usual set of small-scale cleanups and fixes
[Due to the conflict, KVM_SYSTEM_EVENT_SEV_TERM is relocated
from 4 to 6. - Paolo]
Fix a goof in kvm_prepare_memory_region() where KVM fails to free the
new memslot's dirty bitmap during a CREATE action if
kvm_arch_prepare_memory_region() fails. The logic is supposed to detect
if the bitmap was allocated and thus needs to be freed, versus if the
bitmap was inherited from the old memslot and thus needs to be kept. If
there is no old memslot, then obviously the bitmap can't have been
inherited
The bug was exposed by commit 86931ff720 ("KVM: x86/mmu: Do not create
SPTEs for GFNs that exceed host.MAXPHYADDR"), which made it trivally easy
for syzkaller to trigger failure during kvm_arch_prepare_memory_region(),
but the bug can be hit other ways too, e.g. due to -ENOMEM when
allocating x86's memslot metadata.
The backtrace from kmemleak:
__vmalloc_node_range+0xb40/0xbd0 mm/vmalloc.c:3195
__vmalloc_node mm/vmalloc.c:3232 [inline]
__vmalloc+0x49/0x50 mm/vmalloc.c:3246
__vmalloc_array mm/util.c:671 [inline]
__vcalloc+0x49/0x70 mm/util.c:694
kvm_alloc_dirty_bitmap virt/kvm/kvm_main.c:1319
kvm_prepare_memory_region virt/kvm/kvm_main.c:1551
kvm_set_memslot+0x1bd/0x690 virt/kvm/kvm_main.c:1782
__kvm_set_memory_region+0x689/0x750 virt/kvm/kvm_main.c:1949
kvm_set_memory_region virt/kvm/kvm_main.c:1962
kvm_vm_ioctl_set_memory_region virt/kvm/kvm_main.c:1974
kvm_vm_ioctl+0x377/0x13a0 virt/kvm/kvm_main.c:4528
vfs_ioctl fs/ioctl.c:51
__do_sys_ioctl fs/ioctl.c:870
__se_sys_ioctl fs/ioctl.c:856
__x64_sys_ioctl+0xfc/0x140 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:50
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
And the relevant sequence of KVM events:
ioctl(3, KVM_CREATE_VM, 0) = 4
ioctl(4, KVM_SET_USER_MEMORY_REGION, {slot=0,
flags=KVM_MEM_LOG_DIRTY_PAGES,
guest_phys_addr=0x10000000000000,
memory_size=4096,
userspace_addr=0x20fe8000}
) = -1 EINVAL (Invalid argument)
Fixes: 244893fa28 ("KVM: Dynamically allocate "new" memslots from the get-go")
Cc: stable@vger.kernel.org
Reported-by: syzbot+8606b8a9cc97a63f1c87@syzkaller.appspotmail.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220518003842.1341782-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix following coccicheck warning:
./virt/kvm/vfio.c:258:1-7: preceding lock on line 236
If kvm_vfio_file_iommu_group() failed, code would goto err_fdput with
mutex_lock acquired and then return ret. It might cause potential
deadlock. Move mutex_unlock bellow err_fdput tag to fix it.
Fixes: d55d9e7a45 ("kvm/vfio: Store the struct file in the kvm_vfio_group")
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20220517023441.4258-1-wanjiabing@vivo.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
None of the VFIO APIs take in the vfio_group anymore, so we can remove it
completely.
This has a subtle side effect on the enforced coherency tracking. The
vfio_group_get_external_user() was holding on to the container_users which
would prevent the iommu_domain and thus the enforced coherency value from
changing while the group is registered with kvm.
It changes the security proof slightly into 'user must hold a group FD
that has a device that cannot enforce DMA coherence'. As opening the group
FD, not attaching the container, is the privileged operation this doesn't
change the security properties much.
On the flip side it paves the way to changing the iommu_domain/container
attached to a group at runtime which is something that will be required to
support nested translation.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>i
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/7-v3-f7729924a7ea+25e33-vfio_kvm_no_group_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Just change the argument from struct vfio_group to struct file *.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/6-v3-f7729924a7ea+25e33-vfio_kvm_no_group_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Instead of a general extension check change the function into a limited
test if the iommu_domain has enforced coherency, which is the only thing
kvm needs to query.
Make the new op self contained by properly refcounting the container
before touching it.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/5-v3-f7729924a7ea+25e33-vfio_kvm_no_group_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
vfio_group_fops_open() ensures there is only ever one struct file open for
any struct vfio_group at any time:
/* Do we need multiple instances of the group open? Seems not. */
opened = atomic_cmpxchg(&group->opened, 0, 1);
if (opened) {
vfio_group_put(group);
return -EBUSY;
Therefor the struct file * can be used directly to search the list of VFIO
groups that KVM keeps instead of using the
vfio_external_group_match_file() callback to try to figure out if the
passed in FD matches the list or not.
Delete vfio_external_group_match_file().
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/4-v3-f7729924a7ea+25e33-vfio_kvm_no_group_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The only caller wants to get a pointer to the struct iommu_group
associated with the VFIO group file. Instead of returning the group ID
then searching sysfs for that string to get the struct iommu_group just
directly return the iommu_group pointer already held by the vfio_group
struct.
It already has a safe lifetime due to the struct file kref, the vfio_group
and thus the iommu_group cannot be destroyed while the group file is open.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/3-v3-f7729924a7ea+25e33-vfio_kvm_no_group_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Following patches will change the APIs to use the struct file as the handle
instead of the vfio_group, so hang on to a reference to it with the same
duration of as the vfio_group.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/2-v3-f7729924a7ea+25e33-vfio_kvm_no_group_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
To make it easier to read and change in following patches.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1-v3-f7729924a7ea+25e33-vfio_kvm_no_group_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
For TDX guests, the maximum number of vcpus needs to be specified when the
TDX guest VM is initialized (creating the TDX data corresponding to TDX
guest) before creating vcpu. It needs to record the maximum number of
vcpus on VM creation (KVM_CREATE_VM) and return error if the number of
vcpus exceeds it
Because there is already max_vcpu member in arm64 struct kvm_arch, move it
to common struct kvm and initialize it to KVM_MAX_VCPUS before
kvm_arch_init_vm() instead of adding it to x86 struct kvm_arch.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Message-Id: <e53234cdee6a92357d06c80c03d77c19cdefb804.1646422845.git.isaku.yamahata@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fixes for (relatively) old bugs, to be merged in both the -rc and next
development trees:
* Fix potential races when walking host page table
* Fix bad user ABI for KVM_EXIT_SYSTEM_EVENT
* Fix shadow page table leak when KVM runs nested
When KVM_EXIT_SYSTEM_EVENT was introduced, it included a flags
member that at the time was unused. Unfortunately this extensibility
mechanism has several issues:
- x86 is not writing the member, so it would not be possible to use it
on x86 except for new events
- the member is not aligned to 64 bits, so the definition of the
uAPI struct is incorrect for 32- on 64-bit userspace. This is a
problem for RISC-V, which supports CONFIG_KVM_COMPAT, but fortunately
usage of flags was only introduced in 5.18.
Since padding has to be introduced, place a new field in there
that tells if the flags field is valid. To allow further extensibility,
in fact, change flags to an array of 16 values, and store how many
of the values are valid. The availability of the new ndata field
is tied to a system capability; all architectures are changed to
fill in the field.
To avoid breaking compilation of userspace that was using the flags
field, provide a userspace-only union to overlap flags with data[0].
The new field is placed at the same offset for both 32- and 64-bit
userspace.
Cc: Will Deacon <will@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Peter Gonda <pgonda@google.com>
Cc: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reported-by: kernel test robot <lkp@intel.com>
Message-Id: <20220422103013.34832-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Flush the CPU caches when memory is reclaimed from an SEV guest (where
reclaim also includes it being unmapped from KVM's memslots). Due to lack
of coherency for SEV encrypted memory, failure to flush results in silent
data corruption if userspace is malicious/broken and doesn't ensure SEV
guest memory is properly pinned and unpinned.
Cache coherency is not enforced across the VM boundary in SEV (AMD APM
vol.2 Section 15.34.7). Confidential cachelines, generated by confidential
VM guests have to be explicitly flushed on the host side. If a memory page
containing dirty confidential cachelines was released by VM and reallocated
to another user, the cachelines may corrupt the new user at a later time.
KVM takes a shortcut by assuming all confidential memory remain pinned
until the end of VM lifetime. Therefore, KVM does not flush cache at
mmu_notifier invalidation events. Because of this incorrect assumption and
the lack of cache flushing, malicous userspace can crash the host kernel:
creating a malicious VM and continuously allocates/releases unpinned
confidential memory pages when the VM is running.
Add cache flush operations to mmu_notifier operations to ensure that any
physical memory leaving the guest VM get flushed. In particular, hook
mmu_notifier_invalidate_range_start and mmu_notifier_release events and
flush cache accordingly. The hook after releasing the mmu lock to avoid
contention with other vCPUs.
Cc: stable@vger.kernel.org
Suggested-by: Sean Christpherson <seanjc@google.com>
Reported-by: Mingwei Zhang <mizhang@google.com>
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Message-Id: <20220421031407.2516575-4-mizhang@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SPDX comments use use /* */ style comments in headers anad
// style comments in .c files. Also fix two spelling mistakes.
Signed-off-by: Tom Rix <trix@redhat.com>
Message-Id: <20220410153840.55506-1-trix@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Initialize debugfs_entry to its semi-magical -ENOENT value when the VM
is created. KVM's teardown when VM creation fails is kludgy and calls
kvm_uevent_notify_change() and kvm_destroy_vm_debugfs() even if KVM never
attempted kvm_create_vm_debugfs(). Because debugfs_entry is zero
initialized, the IS_ERR() checks pass and KVM derefs a NULL pointer.
BUG: kernel NULL pointer dereference, address: 0000000000000018
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 1068b1067 P4D 1068b1067 PUD 1068b0067 PMD 0
Oops: 0000 [#1] SMP
CPU: 0 PID: 871 Comm: repro Not tainted 5.18.0-rc1+ #825
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:__dentry_path+0x7b/0x130
Call Trace:
<TASK>
dentry_path_raw+0x42/0x70
kvm_uevent_notify_change.part.0+0x10c/0x200 [kvm]
kvm_put_kvm+0x63/0x2b0 [kvm]
kvm_dev_ioctl+0x43a/0x920 [kvm]
__x64_sys_ioctl+0x83/0xb0
do_syscall_64+0x31/0x50
entry_SYSCALL_64_after_hwframe+0x44/0xae
</TASK>
Modules linked in: kvm_intel kvm irqbypass
Fixes: a44a4cc1c9 ("KVM: Don't create VM debugfs files outside of the VM directory")
Cc: stable@vger.kernel.org
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oupton@google.com>
Reported-by: syzbot+df6fbbd2ee39f21289ef@syzkaller.appspotmail.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Message-Id: <20220415004622.2207751-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Some PSCI fixes after introducing PSCIv1.1 and SYSTEM_RESET2
- Fix the MMU write-lock not being taken on THP split
- Fix mixed-width VM handling
- Fix potential UAF when debugfs registration fails
- Various selftest updates for all of the above
-----BEGIN PGP SIGNATURE-----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=0xZo
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 5.18, take #1
- Some PSCI fixes after introducing PSCIv1.1 and SYSTEM_RESET2
- Fix the MMU write-lock not being taken on THP split
- Fix mixed-width VM handling
- Fix potential UAF when debugfs registration fails
- Various selftest updates for all of the above
Unfortunately, there is no guarantee that KVM was able to instantiate a
debugfs directory for a particular VM. To that end, KVM shouldn't even
attempt to create new debugfs files in this case. If the specified
parent dentry is NULL, debugfs_create_file() will instantiate files at
the root of debugfs.
For arm64, it is possible to create the vgic-state file outside of a
VM directory, the file is not cleaned up when a VM is destroyed.
Nonetheless, the corresponding struct kvm is freed when the VM is
destroyed.
Nip the problem in the bud for all possible errant debugfs file
creations by initializing kvm->debugfs_dentry to -ENOENT. In so doing,
debugfs_create_file() will fail instead of creating the file in the root
directory.
Cc: stable@kernel.org
Fixes: 929f45e324 ("kvm: no need to check return value of debugfs_create functions")
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220406235615.1447180-2-oupton@google.com
kvm_vcpu_release() will call kvm_dirty_ring_free(), freeing
ring->dirty_gfns and setting it to NULL. Afterwards, it calls
kvm_arch_vcpu_destroy().
However, if closing the file descriptor races with KVM_RUN in such away
that vcpu->arch.st.preempted == 0, the following call stack leads to a
NULL pointer dereference in kvm_dirty_run_push():
mark_page_dirty_in_slot+0x192/0x270 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3171
kvm_steal_time_set_preempted arch/x86/kvm/x86.c:4600 [inline]
kvm_arch_vcpu_put+0x34e/0x5b0 arch/x86/kvm/x86.c:4618
vcpu_put+0x1b/0x70 arch/x86/kvm/../../../virt/kvm/kvm_main.c:211
vmx_free_vcpu+0xcb/0x130 arch/x86/kvm/vmx/vmx.c:6985
kvm_arch_vcpu_destroy+0x76/0x290 arch/x86/kvm/x86.c:11219
kvm_vcpu_destroy arch/x86/kvm/../../../virt/kvm/kvm_main.c:441 [inline]
The fix is to release the dirty page ring after kvm_arch_vcpu_destroy
has run.
Reported-by: Qiuhao Li <qiuhao@sysec.org>
Reported-by: Gaoning Pan <pgn@zju.edu.cn>
Reported-by: Yongkang Jia <kangel@zju.edu.cn>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It isn't OK to cache the dirty status of a page in internal structures
for an indefinite period of time.
Any time a vCPU exits the run loop to userspace might be its last; the
VMM might do its final check of the dirty log, flush the last remaining
dirty pages to the destination and complete a live migration. If we
have internal 'dirty' state which doesn't get flushed until the vCPU
is finally destroyed on the source after migration is complete, then
we have lost data because that will escape the final copy.
This problem already exists with the use of kvm_vcpu_unmap() to mark
pages dirty in e.g. VMX nesting.
Note that the actual Linux MM already considers the page to be dirty
since we have a writeable mapping of it. This is just about the KVM
dirty logging.
For the nesting-style use cases (KVM_GUEST_USES_PFN) we will need to
track which gfn_to_pfn_caches have been used and explicitly mark the
corresponding pages dirty before returning to userspace. But we would
have needed external tracking of that anyway, rather than walking the
full list of GPCs to find those belonging to this vCPU which are dirty.
So let's rely *solely* on that external tracking, and keep it simple
rather than laying a tempting trap for callers to fall into.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220303154127.202856-3-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace the guest_uses_pa and kernel_map booleans in the PFN cache code
with a unified enum/bitmask. Using explicit names makes it easier to
review and audit call sites.
Opportunistically add a WARN to prevent passing garbage; instantating a
cache without declaring its usage is either buggy or pointless.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220303154127.202856-2-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Don't actually set a request bit in vcpu->requests when making a request
purely to force a vCPU to exit the guest. Logging a request but not
actually consuming it would cause the vCPU to get stuck in an infinite
loop during KVM_RUN because KVM would see the pending request and bail
from VM-Enter to service the request.
Note, it's currently impossible for KVM to set KVM_REQ_GPC_INVALIDATE as
nothing in KVM is wired up to set guest_uses_pa=true. But, it'd be all
too easy for arch code to introduce use of kvm_gfn_to_pfn_cache_init()
without implementing handling of the request, especially since getting
test coverage of MMU notifier interaction with specific KVM features
usually requires a directed test.
Opportunistically rename gfn_to_pfn_cache_invalidate_start()'s wake_vcpus
to evict_vcpus. The purpose of the request is to get vCPUs out of guest
mode, it's supposed to _avoid_ waking vCPUs that are blocking.
Opportunistically rename KVM_REQ_GPC_INVALIDATE to be more specific as to
what it wants to accomplish, and to genericize the name so that it can
used for similar but unrelated scenarios, should they arise in the future.
Add a comment and documentation to explain why the "no action" request
exists.
Add compile-time assertions to help detect improper usage. Use the inner
assertless helper in the one s390 path that makes requests without a
hardcoded request.
Cc: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220223165302.3205276-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If the cache's user host virtual address becomes invalid, there
is still a path from kvm_gfn_to_pfn_cache_refresh() where __release_gpc()
could release the pfn but the gpc->pfn field has not been overwritten
with an error value. If this happens, kvm_gfn_to_pfn_cache_unmap will
call put_page again on the same page.
Cc: stable@vger.kernel.org
Fixes: 982ed0de47 ("KVM: Reinstate gfn_to_pfn_cache with invalidation support")
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This reverts commit 3d3aab1b97.
Now that the KVM module's lifetime is tied to kvm.users_count, there is
no need to also tie it's lifetime to the lifetime of the VM and vCPU
file descriptors.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220303183328.1499189-3-dmatlack@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tie the lifetime the KVM module to the lifetime of each VM via
kvm.users_count. This way anything that grabs a reference to the VM via
kvm_get_kvm() cannot accidentally outlive the KVM module.
Prior to this commit, the lifetime of the KVM module was tied to the
lifetime of /dev/kvm file descriptors, VM file descriptors, and vCPU
file descriptors by their respective file_operations "owner" field.
This approach is insufficient because references grabbed via
kvm_get_kvm() do not prevent closing any of the aforementioned file
descriptors.
This fixes a long standing theoretical bug in KVM that at least affects
async page faults. kvm_setup_async_pf() grabs a reference via
kvm_get_kvm(), and drops it in an asynchronous work callback. Nothing
prevents the VM file descriptor from being closed and the KVM module
from being unloaded before this callback runs.
Fixes: af585b921e ("KVM: Halt vcpu if page it tries to access is swapped out")
Fixes: 3d3aab1b97 ("KVM: set owner of cpu and vm file operations")
Cc: stable@vger.kernel.org
Suggested-by: Ben Gardon <bgardon@google.com>
[ Based on a patch from Ben implemented for Google's kernel. ]
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220303183328.1499189-2-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allocations whose size is related to the memslot size can be arbitrarily
large. Do not use kvzalloc/kvcalloc, as those are limited to "not crazy"
sizes that fit in 32 bits.
Cc: stable@vger.kernel.org
Fixes: 7661809d49 ("mm: don't allow oversized kvmalloc() calls")
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the generic kvm_reload_remote_mmus() and open code its
functionality into the two x86 callers. x86 is (obviously) the only
architecture that uses the hook, and is also the only architecture that
uses KVM_REQ_MMU_RELOAD in a way that's consistent with the name. That
will change in a future patch, as x86's usage when zapping a single
shadow page x86 doesn't actually _need_ to reload all vCPUs' MMUs, only
MMUs whose root is being zapped actually need to be reloaded.
s390 also uses KVM_REQ_MMU_RELOAD, but for a slightly different purpose.
Drop the generic code in anticipation of implementing s390 and x86 arch
specific requests, which will allow dropping KVM_REQ_MMU_RELOAD entirely.
Opportunistically reword the x86 TDP MMU comment to avoid making
references to functions (and requests!) when possible, and to remove the
rather ambiguous "this".
No functional change intended.
Cc: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Message-Id: <20220225182248.3812651-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
VM worker kthreads can linger in the VM process's cgroup for sometime
after KVM terminates the VM process.
KVM terminates the worker kthreads by calling kthread_stop() which waits
on the 'exited' completion, triggered by exit_mm(), via mm_release(), in
do_exit() during the kthread's exit. However, these kthreads are
removed from the cgroup using the cgroup_exit() which happens after the
exit_mm(). Therefore, A VM process can terminate in between the
exit_mm() and cgroup_exit() calls, leaving only worker kthreads in the
cgroup.
Moving worker kthreads back to the original cgroup (kthreadd_task's
cgroup) makes sure that the cgroup is empty as soon as the main VM
process is terminated.
Signed-off-by: Vipin Sharma <vipinsh@google.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220222054848.563321-1-vipinsh@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
I saw the below splatting after the host suspended and resumed.
WARNING: CPU: 0 PID: 2943 at kvm/arch/x86/kvm/../../../virt/kvm/kvm_main.c:5531 kvm_resume+0x2c/0x30 [kvm]
CPU: 0 PID: 2943 Comm: step_after_susp Tainted: G W IOE 5.17.0-rc3+ #4
RIP: 0010:kvm_resume+0x2c/0x30 [kvm]
Call Trace:
<TASK>
syscore_resume+0x90/0x340
suspend_devices_and_enter+0xaee/0xe90
pm_suspend.cold+0x36b/0x3c2
state_store+0x82/0xf0
kernfs_fop_write_iter+0x1b6/0x260
new_sync_write+0x258/0x370
vfs_write+0x33f/0x510
ksys_write+0xc9/0x160
do_syscall_64+0x3b/0xc0
entry_SYSCALL_64_after_hwframe+0x44/0xae
lockdep_is_held() can return -1 when lockdep is disabled which triggers
this warning. Let's use lockdep_assert_not_held() which can detect
incorrect calls while holding a lock and it also avoids false negatives
when lockdep is disabled.
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1644920142-81249-1-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The "struct kvm *kvm" parameter of kvm_make_vcpu_request() is not used,
so remove it. No functional change intended.
Signed-off-by: Jinrong Liang <cloudliang@tencent.com>
Message-Id: <20220125095909.38122-19-cloudliang@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Redo incorrect fix for SEV/SMAP erratum
* Windows 11 Hyper-V workaround
Other x86 changes:
* Various x86 cleanups
* Re-enable access_tracking_perf_test
* Fix for #GP handling on SVM
* Fix for CPUID leaf 0Dh in KVM_GET_SUPPORTED_CPUID
* Fix for ICEBP in interrupt shadow
* Avoid false-positive RCU splat
* Enable Enlightened MSR-Bitmap support for real
ARM:
* Correctly update the shadow register on exception injection when
running in nVHE mode
* Correctly use the mm_ops indirection when performing cache invalidation
from the page-table walker
* Restrict the vgic-v3 workaround for SEIS to the two known broken
implementations
Generic code changes:
* Dead code cleanup
There will be another pull request for ARM fixes next week, but
those patches need a bit more soak time.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmHz5eIUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNv4wgAopj0Zlutrrtw3KT4/XnmSdMPgN0j
jQNzysSLTO5wGQCEogycjYXkGUDFu1Gdi+K91QAyjeKja20pIhPLeS2CBDRJyOc5
73K7sxqz51JnQiVFzkTuA+qzn+lXaJ9LUXtdg8BnQMSKyt2AJOqE8uT10kcYOD5q
mW4V3QUA0QpVKN0cYHv/G/zvBwQGGSLZetFbuAzwH2EDTpIi1aio5ZN1r0AoH18L
2x5kYPpqmnoBvo2cB4b7SNmxv3ZPQ5K+wta0uwZ4pO+UuYiRd84RPr5lErywJC3w
nci0eC0DoXrC6h+35UItqM8RqAGv6LADbDnr1RGojmfogSD0OtbX8y3hjw==
=iKnI
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Two larger x86 series:
- Redo incorrect fix for SEV/SMAP erratum
- Windows 11 Hyper-V workaround
Other x86 changes:
- Various x86 cleanups
- Re-enable access_tracking_perf_test
- Fix for #GP handling on SVM
- Fix for CPUID leaf 0Dh in KVM_GET_SUPPORTED_CPUID
- Fix for ICEBP in interrupt shadow
- Avoid false-positive RCU splat
- Enable Enlightened MSR-Bitmap support for real
ARM:
- Correctly update the shadow register on exception injection when
running in nVHE mode
- Correctly use the mm_ops indirection when performing cache
invalidation from the page-table walker
- Restrict the vgic-v3 workaround for SEIS to the two known broken
implementations
Generic code changes:
- Dead code cleanup"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (43 commits)
KVM: eventfd: Fix false positive RCU usage warning
KVM: nVMX: Allow VMREAD when Enlightened VMCS is in use
KVM: nVMX: Implement evmcs_field_offset() suitable for handle_vmread()
KVM: nVMX: Rename vmcs_to_field_offset{,_table}
KVM: nVMX: eVMCS: Filter out VM_EXIT_SAVE_VMX_PREEMPTION_TIMER
KVM: nVMX: Also filter MSR_IA32_VMX_TRUE_PINBASED_CTLS when eVMCS
selftests: kvm: check dynamic bits against KVM_X86_XCOMP_GUEST_SUPP
KVM: x86: add system attribute to retrieve full set of supported xsave states
KVM: x86: Add a helper to retrieve userspace address from kvm_device_attr
selftests: kvm: move vm_xsave_req_perm call to amx_test
KVM: x86: Sync the states size with the XCR0/IA32_XSS at, any time
KVM: x86: Update vCPU's runtime CPUID on write to MSR_IA32_XSS
KVM: x86: Keep MSR_IA32_XSS unchanged for INIT
KVM: x86: Free kvm_cpuid_entry2 array on post-KVM_RUN KVM_SET_CPUID{,2}
KVM: nVMX: WARN on any attempt to allocate shadow VMCS for vmcs02
KVM: selftests: Don't skip L2's VMCALL in SMM test for SVM guest
KVM: x86: Check .flags in kvm_cpuid_check_equal() too
KVM: x86: Forcibly leave nested virt when SMM state is toggled
KVM: SVM: drop unnecessary code in svm_hv_vmcb_dirty_nested_enlightenments()
KVM: SVM: hyper-v: Enable Enlightened MSR-Bitmap support for real
...
Revert a completely broken check on an "invalid" RIP in SVM's workaround
for the DecodeAssists SMAP errata. kvm_vcpu_gfn_to_memslot() obviously
expects a gfn, i.e. operates in the guest physical address space, whereas
RIP is a virtual (not even linear) address. The "fix" worked for the
problematic KVM selftest because the test identity mapped RIP.
Fully revert the hack instead of trying to translate RIP to a GPA, as the
non-SEV case is now handled earlier, and KVM cannot access guest page
tables to translate RIP.
This reverts commit e72436bc3a.
Fixes: e72436bc3a ("KVM: SVM: avoid infinite loop on NPF from bad address")
Reported-by: Liam Merwick <liam.merwick@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Message-Id: <20220120010719.711476-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The async parameter of hva_to_pfn_remapped() is not used, so remove it.
Signed-off-by: Xianting Tian <xianting.tian@linux.alibaba.com>
Message-Id: <20220124020456.156386-1-xianting.tian@linux.alibaba.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- selftest compilation fix for non-x86
- KVM: avoid warning on s390 in mark_page_dirty
x86:
- fix page write-protection bug and improve comments
- use binary search to lookup the PMU event filter, add test
- enable_pmu module parameter support for Intel CPUs
- switch blocked_vcpu_on_cpu_lock to raw spinlock
- cleanups of blocked vCPU logic
- partially allow KVM_SET_CPUID{,2} after KVM_RUN (5.16 regression)
- various small fixes
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmHpmT0UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOstggAi1VSpT43oGslQjXNDZacHEARoYQs
b0XpoW7HXicGSGRMWspCmiAPdJyYTsioEACttAmXUMs7brAgHb9n/vzdlcLh1ymL
rQw2YFQlfqqB1Ki1iRhNkWlH9xOECsu28WLng6ylrx51GuT/pzWRt+V3EGUFTxIT
ldW9HgZg2oFJIaLjg2hQVR/8EbBf0QdsAD3KV3tyvhBlXPkyeLOMcGe9onfjZ/NE
JQeW7FtKtP4SsIFt1KrJpDPjtiwFt3bRM0gfgGw7//clvtKIqt1LYXZiq4C3b7f5
tfYiC8lO2vnOoYcfeYEmvybbSsoS/CgSliZB32qkwoVvRMIl82YmxtDD+Q==
=/Mak
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull more kvm updates from Paolo Bonzini:
"Generic:
- selftest compilation fix for non-x86
- KVM: avoid warning on s390 in mark_page_dirty
x86:
- fix page write-protection bug and improve comments
- use binary search to lookup the PMU event filter, add test
- enable_pmu module parameter support for Intel CPUs
- switch blocked_vcpu_on_cpu_lock to raw spinlock
- cleanups of blocked vCPU logic
- partially allow KVM_SET_CPUID{,2} after KVM_RUN (5.16 regression)
- various small fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (46 commits)
docs: kvm: fix WARNINGs from api.rst
selftests: kvm/x86: Fix the warning in lib/x86_64/processor.c
selftests: kvm/x86: Fix the warning in pmu_event_filter_test.c
kvm: selftests: Do not indent with spaces
kvm: selftests: sync uapi/linux/kvm.h with Linux header
selftests: kvm: add amx_test to .gitignore
KVM: SVM: Nullify vcpu_(un)blocking() hooks if AVIC is disabled
KVM: SVM: Move svm_hardware_setup() and its helpers below svm_x86_ops
KVM: SVM: Drop AVIC's intermediate avic_set_running() helper
KVM: VMX: Don't do full kick when handling posted interrupt wakeup
KVM: VMX: Fold fallback path into triggering posted IRQ helper
KVM: VMX: Pass desired vector instead of bool for triggering posted IRQ
KVM: VMX: Don't do full kick when triggering posted interrupt "fails"
KVM: SVM: Skip AVIC and IRTE updates when loading blocking vCPU
KVM: SVM: Use kvm_vcpu_is_blocking() in AVIC load to handle preemption
KVM: SVM: Remove unnecessary APICv/AVIC update in vCPU unblocking path
KVM: SVM: Don't bother checking for "running" AVIC when kicking for IPIs
KVM: SVM: Signal AVIC doorbell iff vCPU is in guest mode
KVM: x86: Remove defunct pre_block/post_block kvm_x86_ops hooks
KVM: x86: Unexport LAPIC's switch_to_{hv,sw}_timer() helpers
...
Move the seemingly generic block_vcpu_list from kvm_vcpu to vcpu_vmx, and
rename the list and all associated variables to clarify that it tracks
the set of vCPU that need to be poked on a posted interrupt to the wakeup
vector. The list is not used to track _all_ vCPUs that are blocking, and
the term "blocked" can be misleading as it may refer to a blocking
condition in the host or the guest, where as the PI wakeup case is
specifically for the vCPUs that are actively blocking from within the
guest.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20211208015236.1616697-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove kvm_vcpu.pre_pcpu as it no longer has any users. No functional
change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20211208015236.1616697-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Avoid warnings on s390 like
[ 1801.980931] CPU: 12 PID: 117600 Comm: kworker/12:0 Tainted: G E 5.17.0-20220113.rc0.git0.32ce2abb03cf.300.fc35.s390x+next #1
[ 1801.980938] Workqueue: events irqfd_inject [kvm]
[...]
[ 1801.981057] Call Trace:
[ 1801.981060] [<000003ff805f0f5c>] mark_page_dirty_in_slot+0xa4/0xb0 [kvm]
[ 1801.981083] [<000003ff8060e9fe>] adapter_indicators_set+0xde/0x268 [kvm]
[ 1801.981104] [<000003ff80613c24>] set_adapter_int+0x64/0xd8 [kvm]
[ 1801.981124] [<000003ff805fb9aa>] kvm_set_irq+0xc2/0x130 [kvm]
[ 1801.981144] [<000003ff805f8d86>] irqfd_inject+0x76/0xa0 [kvm]
[ 1801.981164] [<0000000175e56906>] process_one_work+0x1fe/0x470
[ 1801.981173] [<0000000175e570a4>] worker_thread+0x64/0x498
[ 1801.981176] [<0000000175e5ef2c>] kthread+0x10c/0x110
[ 1801.981180] [<0000000175de73c8>] __ret_from_fork+0x40/0x58
[ 1801.981185] [<000000017698440a>] ret_from_fork+0xa/0x40
when writing to a guest from an irqfd worker as long as we do not have
the dirty ring.
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reluctantly-acked-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20220113122924.740496-1-borntraeger@linux.ibm.com>
Fixes: 2efd61a608 ("KVM: Warn if mark_page_dirty() is called without an active vCPU")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Use common KVM implementation of MMU memory caches
- SBI v0.2 support for Guest
- Initial KVM selftests support
- Fix to avoid spurious virtual interrupts after clearing hideleg CSR
- Update email address for Anup and Atish
ARM:
- Simplification of the 'vcpu first run' by integrating it into
KVM's 'pid change' flow
- Refactoring of the FP and SVE state tracking, also leading to
a simpler state and less shared data between EL1 and EL2 in
the nVHE case
- Tidy up the header file usage for the nvhe hyp object
- New HYP unsharing mechanism, finally allowing pages to be
unmapped from the Stage-1 EL2 page-tables
- Various pKVM cleanups around refcounting and sharing
- A couple of vgic fixes for bugs that would trigger once
the vcpu xarray rework is merged, but not sooner
- Add minimal support for ARMv8.7's PMU extension
- Rework kvm_pgtable initialisation ahead of the NV work
- New selftest for IRQ injection
- Teach selftests about the lack of default IPA space and
page sizes
- Expand sysreg selftest to deal with Pointer Authentication
- The usual bunch of cleanups and doc update
s390:
- fix sigp sense/start/stop/inconsistency
- cleanups
x86:
- Clean up some function prototypes more
- improved gfn_to_pfn_cache with proper invalidation, used by Xen emulation
- add KVM_IRQ_ROUTING_XEN_EVTCHN and event channel delivery
- completely remove potential TOC/TOU races in nested SVM consistency checks
- update some PMCs on emulated instructions
- Intel AMX support (joint work between Thomas and Intel)
- large MMU cleanups
- module parameter to disable PMU virtualization
- cleanup register cache
- first part of halt handling cleanups
- Hyper-V enlightened MSR bitmap support for nested hypervisors
Generic:
- clean up Makefiles
- introduce CONFIG_HAVE_KVM_DIRTY_RING
- optimize memslot lookup using a tree
- optimize vCPU array usage by converting to xarray
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmHhxvsUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPZkAf+Nz92UL/5nNGcdHtE4m7AToMmitE9
bYkesf9BMQvAe5wjkABLuoHGi6ay4jabo4fiGzbdkiK7lO5YgfsWiMB3/MT5fl4E
jRPzaVQabp3YZLM8UYCBmfUVuRj524S967SfSRe0AvYjDEH8y7klPf4+7sCsFT0/
Px9Vf2KGuOlf0eM78yKg4rGaF0jS22eLgXm6FfNMY8/e29ZAo/jyUmqBY+Z2xxZG
aWhceDtSheW1jwLHLj3nOlQJvHTn8LVGXBE/R8Gda3ZjrBV2rKaDi4Fh+HD+dz86
2zVXwzQ7uck2CMW73GMoXMTWoKSHMyvlBOs1BdvBm4UsnGcXR+q8IFCeuQ==
=s73m
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"RISCV:
- Use common KVM implementation of MMU memory caches
- SBI v0.2 support for Guest
- Initial KVM selftests support
- Fix to avoid spurious virtual interrupts after clearing hideleg CSR
- Update email address for Anup and Atish
ARM:
- Simplification of the 'vcpu first run' by integrating it into KVM's
'pid change' flow
- Refactoring of the FP and SVE state tracking, also leading to a
simpler state and less shared data between EL1 and EL2 in the nVHE
case
- Tidy up the header file usage for the nvhe hyp object
- New HYP unsharing mechanism, finally allowing pages to be unmapped
from the Stage-1 EL2 page-tables
- Various pKVM cleanups around refcounting and sharing
- A couple of vgic fixes for bugs that would trigger once the vcpu
xarray rework is merged, but not sooner
- Add minimal support for ARMv8.7's PMU extension
- Rework kvm_pgtable initialisation ahead of the NV work
- New selftest for IRQ injection
- Teach selftests about the lack of default IPA space and page sizes
- Expand sysreg selftest to deal with Pointer Authentication
- The usual bunch of cleanups and doc update
s390:
- fix sigp sense/start/stop/inconsistency
- cleanups
x86:
- Clean up some function prototypes more
- improved gfn_to_pfn_cache with proper invalidation, used by Xen
emulation
- add KVM_IRQ_ROUTING_XEN_EVTCHN and event channel delivery
- completely remove potential TOC/TOU races in nested SVM consistency
checks
- update some PMCs on emulated instructions
- Intel AMX support (joint work between Thomas and Intel)
- large MMU cleanups
- module parameter to disable PMU virtualization
- cleanup register cache
- first part of halt handling cleanups
- Hyper-V enlightened MSR bitmap support for nested hypervisors
Generic:
- clean up Makefiles
- introduce CONFIG_HAVE_KVM_DIRTY_RING
- optimize memslot lookup using a tree
- optimize vCPU array usage by converting to xarray"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (268 commits)
x86/fpu: Fix inline prefix warnings
selftest: kvm: Add amx selftest
selftest: kvm: Move struct kvm_x86_state to header
selftest: kvm: Reorder vcpu_load_state steps for AMX
kvm: x86: Disable interception for IA32_XFD on demand
x86/fpu: Provide fpu_sync_guest_vmexit_xfd_state()
kvm: selftests: Add support for KVM_CAP_XSAVE2
kvm: x86: Add support for getting/setting expanded xstate buffer
x86/fpu: Add uabi_size to guest_fpu
kvm: x86: Add CPUID support for Intel AMX
kvm: x86: Add XCR0 support for Intel AMX
kvm: x86: Disable RDMSR interception of IA32_XFD_ERR
kvm: x86: Emulate IA32_XFD_ERR for guest
kvm: x86: Intercept #NM for saving IA32_XFD_ERR
x86/fpu: Prepare xfd_err in struct fpu_guest
kvm: x86: Add emulation for IA32_XFD
x86/fpu: Provide fpu_update_guest_xfd() for IA32_XFD emulation
kvm: x86: Enable dynamic xfeatures at KVM_SET_CPUID2
x86/fpu: Provide fpu_enable_guest_xfd_features() for KVM
x86/fpu: Add guest support to xfd_enable_feature()
...
"Cleanup of the perf/kvm interaction."
-----BEGIN PGP SIGNATURE-----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=tU5G
-----END PGP SIGNATURE-----
Merge tag 'perf_core_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Borislav Petkov:
"Cleanup of the perf/kvm interaction."
* tag 'perf_core_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Drop guest callback (un)register stubs
KVM: arm64: Drop perf.c and fold its tiny bits of code into arm.c
KVM: arm64: Hide kvm_arm_pmu_available behind CONFIG_HW_PERF_EVENTS=y
KVM: arm64: Convert to the generic perf callbacks
KVM: x86: Move Intel Processor Trace interrupt handler to vmx.c
KVM: Move x86's perf guest info callbacks to generic KVM
KVM: x86: More precisely identify NMI from guest when handling PMI
KVM: x86: Drop current_vcpu for kvm_running_vcpu + kvm_arch_vcpu variable
perf/core: Use static_call to optimize perf_guest_info_callbacks
perf: Force architectures to opt-in to guest callbacks
perf: Add wrappers for invoking guest callbacks
perf/core: Rework guest callbacks to prepare for static_call support
perf: Drop dead and useless guest "support" from arm, csky, nds32 and riscv
perf: Stop pretending that perf can handle multiple guest callbacks
KVM: x86: Register Processor Trace interrupt hook iff PT enabled in guest
KVM: x86: Register perf callbacks after calling vendor's hardware_setup()
perf: Protect perf_guest_cbs with RCU
This can be used in two modes. There is an atomic mode where the cached
mapping is accessed while holding the rwlock, and a mode where the
physical address is used by a vCPU in guest mode.
For the latter case, an invalidation will wake the vCPU with the new
KVM_REQ_GPC_INVALIDATE, and the architecture will need to refresh any
caches it still needs to access before entering guest mode again.
Only one vCPU can be targeted by the wake requests; it's simple enough
to make it wake all vCPUs or even a mask but I don't see a use case for
that additional complexity right now.
Invalidation happens from the invalidate_range_start MMU notifier, which
needs to be able to sleep in order to wake the vCPU and wait for it.
This means that revalidation potentially needs to "wait" for the MMU
operation to complete and the invalidate_range_end notifier to be
invoked. Like the vCPU when it takes a page fault in that period, we
just spin — fixing that in a future patch by implementing an actual
*wait* may be another part of shaving this particularly hirsute yak.
As noted in the comments in the function itself, the only case where
the invalidate_range_start notifier is expected to be called *without*
being able to sleep is when the OOM reaper is killing the process. In
that case, we expect the vCPU threads already to have exited, and thus
there will be nothing to wake, and no reason to wait. So we clear the
KVM_REQUEST_WAIT bit and send the request anyway, then complain loudly
if there actually *was* anything to wake up.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20211210163625.2886-3-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The various kvm_write_guest() and mark_page_dirty() functions must only
ever be called in the context of an active vCPU, because if dirty ring
tracking is enabled it may simply oops when kvm_get_running_vcpu()
returns NULL for the vcpu and then kvm_dirty_ring_get() dereferences it.
This oops was reported by "butt3rflyh4ck" <butterflyhuangxx@gmail.com> in
https://lore.kernel.org/kvm/CAFcO6XOmoS7EacN_n6v4Txk7xL7iqRa2gABg3F7E3Naf5uG94g@mail.gmail.com/
That actual bug will be fixed under separate cover but this warning
should help to prevent new ones from being added.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20211210163625.2886-2-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Splitting kvm_main.c out into smaller and better-organized files is
slightly non-trivial when it involves editing a bunch of per-arch
KVM makefiles. Provide virt/kvm/Makefile.kvm for them to include.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Acked-by: Marc Zyngier <maz@kernel.org>
Message-Id: <20211121125451.9489-3-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
