This includes everything from part 2:
* Support for tuning for systems with fast misaligned accesses.
* Support for SBI-based suspend.
* Support for the new SBI debug console extension.
* The T-Head CMOs now use PA-based flushes.
* Support for enabling the V extension in kernel code.
* Optimized IP checksum routines.
* Various ftrace improvements.
* Support for archrandom, which depends on the Zkr extension.
and then also a fix for those:
* The build is no longer broken under NET=n, KUNIT=y for ports that
don't define their own ipv6 checksum.
-----BEGIN PGP SIGNATURE-----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=Sjhj
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.8-mw4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
- Support for tuning for systems with fast misaligned accesses.
- Support for SBI-based suspend.
- Support for the new SBI debug console extension.
- The T-Head CMOs now use PA-based flushes.
- Support for enabling the V extension in kernel code.
- Optimized IP checksum routines.
- Various ftrace improvements.
- Support for archrandom, which depends on the Zkr extension.
- The build is no longer broken under NET=n, KUNIT=y for ports that
don't define their own ipv6 checksum.
* tag 'riscv-for-linus-6.8-mw4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (56 commits)
lib: checksum: Fix build with CONFIG_NET=n
riscv: lib: Check if output in asm goto supported
riscv: Fix build error on rv32 + XIP
riscv: optimize ELF relocation function in riscv
RISC-V: Implement archrandom when Zkr is available
riscv: Optimize hweight API with Zbb extension
riscv: add dependency among Image(.gz), loader(.bin), and vmlinuz.efi
samples: ftrace: Add RISC-V support for SAMPLE_FTRACE_DIRECT[_MULTI]
riscv: ftrace: Add DYNAMIC_FTRACE_WITH_DIRECT_CALLS support
riscv: ftrace: Make function graph use ftrace directly
riscv: select FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY
lib/Kconfig.debug: Update AS_HAS_NON_CONST_LEB128 comment and name
riscv: Restrict DWARF5 when building with LLVM to known working versions
riscv: Hoist linker relaxation disabling logic into Kconfig
kunit: Add tests for csum_ipv6_magic and ip_fast_csum
riscv: Add checksum library
riscv: Add checksum header
riscv: Add static key for misaligned accesses
asm-generic: Improve csum_fold
RISC-V: selftests: cbo: Ensure asm operands match constraints
...
A trace instance may only need to enable specific events. As the eventfs
directory of an instance currently creates all events which adds overhead,
allow internal instances to be created with just the events in systems
that they care about. This currently only deals with systems and not
individual events, but this should bring down the overhead of creating
instances for specific use cases quite bit.
The trace_array_get_by_name() now has another parameter "systems". This
parameter is a const string pointer of a comma/space separated list of
event systems that should be created by the trace_array. (Note if the
trace_array already exists, this parameter is ignored).
The list of systems is saved and if a module is loaded, its events will
not be added unless the system for those events also match the systems
string.
Link: https://lore.kernel.org/linux-trace-kernel/20231213093701.03fddec0@gandalf.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Arun Easi <aeasi@marvell.com>
Cc: Daniel Wagner <dwagner@suse.de>
Tested-by: Dmytro Maluka <dmaluka@chromium.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When cross-building the arm64 kernel with allmodconfig using GCC 9.4,
the following error occurs on multiple files under samples/ftrace/:
/tmp/ccPC1ODs.s: Assembler messages:
/tmp/ccPC1ODs.s:8: Error: selected processor does not support `bti c'
Fix this issue by replacing `bti c` with `hint 34`, which is compatible
for the older compiler.
Link: https://lore.kernel.org/linux-trace-kernel/20230820111509.1470826-1-gongruiqi@huaweicloud.com
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Florent Revest <revest@chromium.org>
Fixes: 8c3526fb86 ("arm64: ftrace: Add direct call trampoline samples support")
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: GONG, Ruiqi <gongruiqi1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The ftrace samples need per-architecture trampoline implementations
to save and restore argument registers around the calls to
my_direct_func* and to restore polluted registers (eg: x30).
These samples also include <asm/asm-offsets.h> which, on arm64, is not
necessary and redefines previously defined macros (resulting in
warnings) so these includes are guarded by !CONFIG_ARM64.
Link: https://lkml.kernel.org/r/20230427140700.625241-3-revest@chromium.org
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Florent Revest <revest@chromium.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The ftrace-direct-too sample traces the handle_mm_fault function whose
signature changed since the introduction of the sample. Since:
commit bce617edec ("mm: do page fault accounting in handle_mm_fault")
handle_mm_fault now has 4 arguments. Therefore, the sample trampoline
should save 4 argument registers.
s390 saves all argument registers already so it does not need a change
but x86_64 needs an extra push and pop.
This also evolves the signature of the tracing function to make it
mirror the signature of the traced function.
Link: https://lkml.kernel.org/r/20230427140700.625241-2-revest@chromium.org
Cc: stable@vger.kernel.org
Fixes: bce617edec ("mm: do page fault accounting in handle_mm_fault")
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Florent Revest <revest@chromium.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
1, Better backtraces for humanization;
2, Relay BCE exceptions to userland as SIGSEGV;
3, Provide kernel fpu functions;
4, Optimize memory ops (memset/memcpy/memmove);
5, Optimize checksum and crc32(c) calculation;
6, Add ARCH_HAS_FORTIFY_SOURCE selection;
7, Add function error injection support;
8, Add ftrace with direct call support;
9, Add basic perf tools support.
-----BEGIN PGP SIGNATURE-----
iQJKBAABCAA0FiEEzOlt8mkP+tbeiYy5AoYrw/LiJnoFAmRQlUsWHGNoZW5odWFj
YWlAa2VybmVsLm9yZwAKCRAChivD8uImekCTD/9fc2U+FIXhJOWV5yK9TCjJTRnK
ASvk0JMYIDA60+fnof3C85tDu9Py9M5Mvt/Ec5pBaHErn16irq85AdD74/OmyCc2
V4pRFHbYLu0WBFQN77gfNXH0XErgYXdceZvaMXajVz2H6NlSKSWZOVN/9ut5SLi3
mt0rCwCsyahj92n8+hOjjZeFbDaPfPMCQ/8n9dnadhbBm9iz35fOKY+qIBHJMJ9a
wPfZ2k3wu5DHs/2+ZjFNhlwrlURTp3RlcVQ7QWDcR1LM3Z4/lEkD8tAI/r8sR9gw
rxzoBSaQzo/zscUmYo0jh1BoW2w0n+x/GfH70Pyz3iwZky3jwpdP0nRwnB4h+tnE
wKlpa5K7RfaqUxZExFfGALmlkALtjQgiXPYbORHMsD6l6XwrOMCeyQismm1oo66m
JBlsdXCms5aracYmWhXnVmTlBqGjAgYAxm62ap62uwlmULy4qUv6kFeW0fERn9NJ
5bKgbrkcal/WkMBawQqtG03niRkykqpqFooZ95ubj4Lib4VM0BmEvFrREjgXO7AE
jpLimYsT9ROE3YQJqyWyLYkmc2ShwWj70INTpz2viMtQ2blIRKvRVsxs976bHuwS
mGsZtiiANjhT2bAUhN7bct2Cf13MtPXiuf0etcJbrNSAtoBIFk+3uRRKHH2rM+CK
oKYjO+exPyuQ9nSOBg==
=3aTV
-----END PGP SIGNATURE-----
Merge tag 'loongarch-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Better backtraces for humanization
- Relay BCE exceptions to userland as SIGSEGV
- Provide kernel fpu functions
- Optimize memory ops (memset/memcpy/memmove)
- Optimize checksum and crc32(c) calculation
- Add ARCH_HAS_FORTIFY_SOURCE selection
- Add function error injection support
- Add ftrace with direct call support
- Add basic perf tools support
* tag 'loongarch-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (24 commits)
tools/perf: Add basic support for LoongArch
LoongArch: ftrace: Add direct call trampoline samples support
LoongArch: ftrace: Add direct call support
LoongArch: ftrace: Implement ftrace_find_callable_addr() to simplify code
LoongArch: ftrace: Fix build error if DYNAMIC_FTRACE_WITH_REGS is not set
LoongArch: ftrace: Abstract DYNAMIC_FTRACE_WITH_ARGS accesses
LoongArch: Add support for function error injection
LoongArch: Add ARCH_HAS_FORTIFY_SOURCE selection
LoongArch: crypto: Add crc32 and crc32c hw acceleration
LoongArch: Add checksum optimization for 64-bit system
LoongArch: Optimize memory ops (memset/memcpy/memmove)
LoongArch: Provide kernel fpu functions
LoongArch: Relay BCE exceptions to userland as SIGSEGV with si_code=SEGV_BNDERR
LoongArch: Tweak the BADV and CPUCFG.PRID lines in show_regs()
LoongArch: Humanize the ESTAT line when showing registers
LoongArch: Humanize the ECFG line when showing registers
LoongArch: Humanize the EUEN line when showing registers
LoongArch: Humanize the PRMD line when showing registers
LoongArch: Humanize the CRMD line when showing registers
LoongArch: Fix format of CSR lines during show_regs()
...
The ftrace samples need per-architecture trampoline implementations to
save and restore argument registers around the calls to my_direct_func*
and to restore polluted registers (e.g: ra).
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Now that the original _ftrace_direct APIs are gone, the "_multi"
suffixes only add confusion.
Link: https://lkml.kernel.org/r/20230321140424.345218-5-revest@chromium.org
Signed-off-by: Florent Revest <revest@chromium.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The _multi API requires that users keep their own ops but can enforce
that an op is only associated to one direct call.
Link: https://lkml.kernel.org/r/20230321140424.345218-3-revest@chromium.org
Signed-off-by: Florent Revest <revest@chromium.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
A common pattern when using the ftrace_direct_multi API is to unregister
the ops and also immediately free its filter. We've noticed it's very
easy for users to miss calling ftrace_free_filter().
This adds a "free_filters" argument to unregister_ftrace_direct_multi()
to both remind the user they should free filters and also to make their
life easier.
Link: https://lkml.kernel.org/r/20230321140424.345218-2-revest@chromium.org
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Florent Revest <revest@chromium.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
smatch reports this representative issue
samples/ftrace/ftrace-ops.c:15:14: warning: symbol 'nr_function_calls' was not declared. Should it be static?
The nr_functions_calls and several other global variables are only
used in ftrace-ops.c, so they should be static.
Remove the instances of initializing static int to 0.
Link: https://lore.kernel.org/linux-trace-kernel/20230130193708.1378108-1-trix@redhat.com
Signed-off-by: Tom Rix <trix@redhat.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Calculating the average period requires a 64-bit division that leads
to a link failure on 32-bit architectures:
x86_64-linux-ld: samples/ftrace/ftrace-ops.o: in function `ftrace_ops_sample_init':
ftrace-ops.c:(.init.text+0x23b): undefined reference to `__udivdi3'
Use the div_u64() helper to do this instead. Since this is an init function that
is not called frequently, the runtime overhead is going to be acceptable.
Link: https://lore.kernel.org/linux-trace-kernel/20230130130246.247537-1-arnd@kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: b56c68f705 ("ftrace: Add sample with custom ops")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When other architectures without the nospec functionality write their
direct-call functions of samples/ftrace/*.c, the including of
asm/nospec-branch.h must be taken care to fix the no header file found
error in building process.
This commit (ee3e2469b3 "x86/ftrace: Make it call depth tracking aware")
file-globally includes asm/nospec-branch.h providing CALL_DEPTH_ACCOUNT
for only x86 direct-call functions.
It seems better to move the including to `#ifdef CONFIG_X86_64`.
Link: https://lore.kernel.org/linux-trace-kernel/20230130085954.647845-1-suagrfillet@gmail.com
Signed-off-by: Song Shuai <suagrfillet@gmail.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Setting filters on an ftrace ops results in some memory being allocated
for the filter hashes, which must be freed before the ops can be freed.
This can be done by removing every individual element of the hash by
calling ftrace_set_filter_ip() or ftrace_set_filter_ips() with `remove`
set, but this is somewhat error prone as it's easy to forget to remove
an element.
Make it easier to clean this up by exporting ftrace_free_filter(), which
can be used to clean up all of the filter hashes after an ftrace_ops has
been unregistered.
Using this, fix the ftrace-direct* samples to free hashes prior to being
unloaded. All other code either removes individual filters explicitly or
is built-in and already calls ftrace_free_filter().
Link: https://lkml.kernel.org/r/20230103124912.2948963-3-mark.rutland@arm.com
Cc: stable@vger.kernel.org
Cc: Florent Revest <revest@chromium.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: e1067a07cf ("ftrace/samples: Add module to test multi direct modify interface")
Fixes: 5fae941b9a ("ftrace/samples: Add multi direct interface test module")
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Since ftrace has trampolines, don't use thunks for the __fentry__ site
but instead require that every function called from there includes
accounting. This very much includes all the direct-call functions.
Additionally, ftrace uses ROP tricks in two places:
- return_to_handler(), and
- ftrace_regs_caller() when pt_regs->orig_ax is set by a direct-call.
return_to_handler() already uses a retpoline to replace an
indirect-jump to defeat IBT, since this is a jump-type retpoline, make
sure there is no accounting done and ALTERNATIVE the RET into a ret.
ftrace_regs_caller() does much the same and gets the same treatment.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220915111148.927545073@infradead.org
misleading/wrong stacktraces and confuse RELIABLE_STACKTRACE and
LIVEPATCH as the backtrace misses the function which is being fixed up.
- Add Straight Light Speculation mitigation support which uses a new
compiler switch -mharden-sls= which sticks an INT3 after a RET or an
indirect branch in order to block speculation after them. Reportedly,
CPUs do speculate behind such insns.
- The usual set of cleanups and improvements
-----BEGIN PGP SIGNATURE-----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=R52z
-----END PGP SIGNATURE-----
Merge tag 'x86_core_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 core updates from Borislav Petkov:
- Get rid of all the .fixup sections because this generates
misleading/wrong stacktraces and confuse RELIABLE_STACKTRACE and
LIVEPATCH as the backtrace misses the function which is being fixed
up.
- Add Straight Line Speculation mitigation support which uses a new
compiler switch -mharden-sls= which sticks an INT3 after a RET or an
indirect branch in order to block speculation after them. Reportedly,
CPUs do speculate behind such insns.
- The usual set of cleanups and improvements
* tag 'x86_core_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits)
x86/entry_32: Fix segment exceptions
objtool: Remove .fixup handling
x86: Remove .fixup section
x86/word-at-a-time: Remove .fixup usage
x86/usercopy: Remove .fixup usage
x86/usercopy_32: Simplify __copy_user_intel_nocache()
x86/sgx: Remove .fixup usage
x86/checksum_32: Remove .fixup usage
x86/vmx: Remove .fixup usage
x86/kvm: Remove .fixup usage
x86/segment: Remove .fixup usage
x86/fpu: Remove .fixup usage
x86/xen: Remove .fixup usage
x86/uaccess: Remove .fixup usage
x86/futex: Remove .fixup usage
x86/msr: Remove .fixup usage
x86/extable: Extend extable functionality
x86/entry_32: Remove .fixup usage
x86/entry_64: Remove .fixup usage
x86/copy_mc_64: Remove .fixup usage
...
There's another compilation fail (first here [1]) reported by kernel
test robot for W=1 clang build:
>> samples/ftrace/ftrace-direct-multi-modify.c:7:6: warning: no previous
prototype for function 'my_direct_func1' [-Wmissing-prototypes]
void my_direct_func1(unsigned long ip)
Direct functions in ftrace direct sample modules need to have prototypes
defined. They are already global in order to be visible for the inline
assembly, so there's no problem.
The kernel test robot reported just error for ftrace-direct-multi-modify,
but I got same errors also for the rest of the modules touched by this patch.
[1] 67d4f6e3bf ftrace/samples: Add missing prototype for my_direct_func
Link: https://lkml.kernel.org/r/20211219135317.212430-1-jolsa@kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Fixes: e1067a07cf ("ftrace/samples: Add module to test multi direct modify interface")
Fixes: ae0cc3b7e7 ("ftrace/samples: Add a sample module that implements modify_ftrace_direct()")
Fixes: 156473a0ff ("ftrace: Add another example of register_ftrace_direct() use case")
Fixes: b06457c83a ("ftrace: Add sample module that uses register_ftrace_direct()")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Adding ftrace-direct-multi-modify.ko kernel module that uses
modify_ftrace_direct_multi API. The core functionality is taken
from ftrace-direct-modify.ko kernel module and changed to fit
multi direct interface.
The init function creates kthread that periodically calls
modify_ftrace_direct_multi to change the trampoline address
for the direct ftrace_ops. The ftrace trace_pipe then shows
trace from both trampolines.
Link: https://lkml.kernel.org/r/20211206182032.87248-4-jolsa@kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Replace all ret/retq instructions with ASM_RET in preparation of
making it more than a single instruction.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211204134907.964635458@infradead.org
Currently it is not possible to build the ftrace direct multi example
anymore due to broken config dependencies. Fix this by adding
SAMPLE_FTRACE_DIRECT_MULTI config option.
This broke when merging s390-5.16-1 due to an incorrect merge conflict
resolution proposed by me.
Also rename SAMPLE_FTRACE_MULTI_DIRECT to SAMPLE_FTRACE_DIRECT_MULTI
so it matches the module name.
Fixes: 0b707e572a ("Merge tag 's390-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux")
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20211115195614.3173346-2-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
- Add support for ftrace with direct call and ftrace direct call samples.
- Add support for kernel command lines longer than current 896 bytes and
make its length configurable.
- Add support for BEAR enhancement facility to improve last breaking
event instruction tracking.
- Add kprobes sanity checks and testcases to prevent kprobe in the mid
of an instruction.
- Allow concurrent access to /dev/hwc for the CPUMF users.
- Various ftrace / jump label improvements.
- Convert unwinder tests to KUnit.
- Add s390_iommu_aperture kernel parameter to tweak the limits on
concurrently usable DMA mappings.
- Add ap.useirq AP module option which can be used to disable interrupt
use.
- Add add_disk() error handling support to block device drivers.
- Drop arch specific and use generic implementation of strlcpy and strrchr.
- Several __pa/__va usages fixes.
- Various cio, crypto, pci, kernel doc and other small fixes and
improvements all over the code.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAmGFW6EACgkQjYWKoQLX
FBg20Qf/UbohgnKnE6vxbbH3sNTlI2dk3Cw4z3IobcsZgqXAu6AFLgLQGLk/X07F
DIyUdrgSgCzLIEKLqrLrFXIOMIK44zAGaurIltNt7IrnWWlA+/YVD+YeL2gHwccq
wT7KXRcrVMZQ1z18djJQ45DpPUC8ErBdL6+P+ftHck90YGFZsfMA5S7jf8X1h08U
IlqdPTmY8t4unKHWVpHbxx9b+xrUuV6KTEXADsllpMV2jQoTLdDECd3vmefYR6tR
3lssgop1m/RzH5OCqvia5Sy2D5fOQObNWDMakwOkVMxOD43lmGCTHstzS2Uo2OFE
QcY79lfZ5NrzKnenUdE5Fd0XJ9kSwQ==
=k0Ab
-----END PGP SIGNATURE-----
Merge tag 's390-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Add support for ftrace with direct call and ftrace direct call
samples.
- Add support for kernel command lines longer than current 896 bytes
and make its length configurable.
- Add support for BEAR enhancement facility to improve last breaking
event instruction tracking.
- Add kprobes sanity checks and testcases to prevent kprobe in the mid
of an instruction.
- Allow concurrent access to /dev/hwc for the CPUMF users.
- Various ftrace / jump label improvements.
- Convert unwinder tests to KUnit.
- Add s390_iommu_aperture kernel parameter to tweak the limits on
concurrently usable DMA mappings.
- Add ap.useirq AP module option which can be used to disable interrupt
use.
- Add add_disk() error handling support to block device drivers.
- Drop arch specific and use generic implementation of strlcpy and
strrchr.
- Several __pa/__va usages fixes.
- Various cio, crypto, pci, kernel doc and other small fixes and
improvements all over the code.
[ Merge fixup as per https://lore.kernel.org/all/YXAqZ%2FEszRisunQw@osiris/ ]
* tag 's390-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (63 commits)
s390: make command line configurable
s390: support command lines longer than 896 bytes
s390/kexec_file: move kernel image size check
s390/pci: add s390_iommu_aperture kernel parameter
s390/spinlock: remove incorrect kernel doc indicator
s390/string: use generic strlcpy
s390/string: use generic strrchr
s390/ap: function rework based on compiler warning
s390/cio: make ccw_device_dma_* more robust
s390/vfio-ap: s390/crypto: fix all kernel-doc warnings
s390/hmcdrv: fix kernel doc comments
s390/ap: new module option ap.useirq
s390/cpumf: Allow multiple processes to access /dev/hwc
s390/bitops: return true/false (not 1/0) from bool functions
s390: add support for BEAR enhancement facility
s390: introduce nospec_uses_trampoline()
s390: rename last_break to pgm_last_break
s390/ptrace: add last_break member to pt_regs
s390/sclp: sort out physical vs virtual pointers usage
s390/setup: convert start and end initrd pointers to virtual
...
There's compilation fail reported kernel test robot for W=1 build:
>> samples/ftrace/ftrace-direct-multi.c:8:6: warning: no previous
prototype for function 'my_direct_func' [-Wmissing-prototypes]
void my_direct_func(unsigned long ip)
The inlined assembly is used outside function, so we can't make
my_direct_func static and pass it as asm input argument.
However my_tramp is already extern so I think there's no problem
keeping my_direct_func extern as well and just add its prototype.
Link: https://lkml.kernel.org/r/20211101153907.377668-1-jolsa@kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 5fae941b9a ("ftrace/samples: Add multi direct interface test module")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Adding simple module that uses multi direct interface:
register_ftrace_direct_multi
unregister_ftrace_direct_multi
The init function registers trampoline for 2 functions,
and exit function unregisters them.
Link: https://lkml.kernel.org/r/20211008091336.33616-9-jolsa@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add s390 support for ftrace direct call samples, which also enables
ftrace direct call selftests within ftrace selftests.
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20211012133802.2460757-5-hca@linux.ibm.com
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
my_tramp[12]? are declared as global functions in C, but they are not
marked global in the inline assembly definition. This mismatch confuses
Clang's Control-Flow Integrity checking. Fix the definitions by adding
.globl.
Link: https://lkml.kernel.org/r/20201113183414.1446671-1-samitolvanen@google.com
Fixes: 9d907f1ae8 ("ftrace/samples: Add a sample module that implements modify_ftrace_direct()")
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add a sample module that tests modify_ftrace_direct(), and this can be used
by the selftests as well.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add another module sample that registers a direct trampoline to a function
via register_ftrace_direct(). Having another module that does this allows to
test the use case of multiple direct callers registered, as more than one
direct caller goes into another path, and is needed to perform proper
testing of the register_ftrace_direct() call.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add a sample module that shows a simple use case for
regsiter_ftrace_direct(), and how to use it.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
