When resolving name in ceph_dns_resolve_name(), the end address of name
is determined by the minimum value of delim_p and colon_p. So using min()
here is more in line with the context.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Currently, when built with "make W=1", the following warnings are
generated:
net/ceph/crush/mapper.c:466: warning: Function parameter or struct member 'work' not described in 'crush_choose_firstn'
net/ceph/crush/mapper.c:466: warning: Function parameter or struct member 'weight' not described in 'crush_choose_firstn'
net/ceph/crush/mapper.c:466: warning: Function parameter or struct member 'weight_max' not described in 'crush_choose_firstn'
net/ceph/crush/mapper.c:466: warning: Function parameter or struct member 'choose_args' not described in 'crush_choose_firstn'
Update the crush_choose_firstn() kernel-doc to document these
parameters.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Currently, when built with "make W=1", the following warnings are
generated:
net/ceph/crush/mapper.c:655: warning: Function parameter or struct member 'map' not described in 'crush_choose_indep'
net/ceph/crush/mapper.c:655: warning: Function parameter or struct member 'work' not described in 'crush_choose_indep'
net/ceph/crush/mapper.c:655: warning: Function parameter or struct member 'bucket' not described in 'crush_choose_indep'
net/ceph/crush/mapper.c:655: warning: Function parameter or struct member 'weight' not described in 'crush_choose_indep'
net/ceph/crush/mapper.c:655: warning: Function parameter or struct member 'weight_max' not described in 'crush_choose_indep'
net/ceph/crush/mapper.c:655: warning: Function parameter or struct member 'x' not described in 'crush_choose_indep'
net/ceph/crush/mapper.c:655: warning: Function parameter or struct member 'left' not described in 'crush_choose_indep'
net/ceph/crush/mapper.c:655: warning: Function parameter or struct member 'numrep' not described in 'crush_choose_indep'
net/ceph/crush/mapper.c:655: warning: Function parameter or struct member 'type' not described in 'crush_choose_indep'
net/ceph/crush/mapper.c:655: warning: Function parameter or struct member 'out' not described in 'crush_choose_indep'
net/ceph/crush/mapper.c:655: warning: Function parameter or struct member 'outpos' not described in 'crush_choose_indep'
net/ceph/crush/mapper.c:655: warning: Function parameter or struct member 'tries' not described in 'crush_choose_indep'
net/ceph/crush/mapper.c:655: warning: Function parameter or struct member 'recurse_tries' not described in 'crush_choose_indep'
net/ceph/crush/mapper.c:655: warning: Function parameter or struct member 'recurse_to_leaf' not described in 'crush_choose_indep'
net/ceph/crush/mapper.c:655: warning: Function parameter or struct member 'out2' not described in 'crush_choose_indep'
net/ceph/crush/mapper.c:655: warning: Function parameter or struct member 'parent_r' not described in 'crush_choose_indep'
net/ceph/crush/mapper.c:655: warning: Function parameter or struct member 'choose_args' not described in 'crush_choose_indep'
These warnings are generated because the prologue comment for
crush_choose_indep() uses the kernel-doc prefix, but the actual
comment is a very brief description that is not in kernel-doc
format. Since this is a static function there is no need to fully
document the function, so replace the kernel-doc comment prefix with a
standard comment prefix to remove these warnings.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The way the delayed work is handled in ceph_monc_stop() is prone to
races with mon_fault() and possibly also finish_hunting(). Both of
these can requeue the delayed work which wouldn't be canceled by any of
the following code in case that happens after cancel_delayed_work_sync()
runs -- __close_session() doesn't mess with the delayed work in order
to avoid interfering with the hunting interval logic. This part was
missed in commit b5d91704f5 ("libceph: behave in mon_fault() if
cur_mon < 0") and use-after-free can still ensue on monc and objects
that hang off of it, with monc->auth and monc->monmap being
particularly susceptible to quickly being reused.
To fix this:
- clear monc->cur_mon and monc->hunting as part of closing the session
in ceph_monc_stop()
- bail from delayed_work() if monc->cur_mon is cleared, similar to how
it's done in mon_fault() and finish_hunting() (based on monc->hunting)
- call cancel_delayed_work_sync() after the session is closed
Cc: stable@vger.kernel.org
Link: https://tracker.ceph.com/issues/66857
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
The cursor is no longer initialized in the OSD client, causing the
sparse read state machine to fall into an infinite loop. The cursor
should be initialized in IN_S_PREPARE_SPARSE_DATA state.
[ idryomov: use msg instead of con->in_msg, changelog ]
Link: https://tracker.ceph.com/issues/64607
Fixes: 8e46a2d068 ("libceph: just wait for more data to be available on the socket")
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Tested-by: Luis Henriques <lhenriques@suse.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
A short read may occur while reading the message footer from the
socket. Later, when the socket is ready for another read, the
messenger invokes all read_partial_*() handlers, including
read_partial_sparse_msg_data(). The expectation is that
read_partial_sparse_msg_data() would bail, allowing the messenger to
invoke read_partial() for the footer and pick up where it left off.
However read_partial_sparse_msg_data() violates that and ends up
calling into the state machine in the OSD client. The sparse-read
state machine assumes that it's a new op and interprets some piece of
the footer as the sparse-read header and returns bogus extents/data
length, etc.
To determine whether read_partial_sparse_msg_data() should bail, let's
reuse cursor->total_resid. Because once it reaches to zero that means
all the extents and data have been successfully received in last read,
else it could break out when partially reading any of the extents and
data. And then osd_sparse_read() could continue where it left off.
[ idryomov: changelog ]
Link: https://tracker.ceph.com/issues/63586
Fixes: d396f89db3 ("libceph: add sparse read support to msgr1")
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
These functions are supposed to behave like other read_partial_*()
handlers: the contract with messenger v1 is that the handler bails if
the area of the message it's responsible for is already processed.
This comes up when handling short reads from the socket.
[ idryomov: changelog ]
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Acked-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Once this happens that means there have bugs.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
There is no any limit for the extent array size and it's possible
that when reading with a large size contents the total number of
extents will exceed 4096. Then the messager will fail by reseting
the connection and keeps resending the inflight IOs infinitely.
[ idryomov: adjust error message ]
Link: https://tracker.ceph.com/issues/62081
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
API:
- Add virtual-address based lskcipher interface.
- Optimise ahash/shash performance in light of costly indirect calls.
- Remove ahash alignmask attribute.
Algorithms:
- Improve AES/XTS performance of 6-way unrolling for ppc.
- Remove some uses of obsolete algorithms (md4, md5, sha1).
- Add FIPS 202 SHA-3 support in pkcs1pad.
- Add fast path for single-page messages in adiantum.
- Remove zlib-deflate.
Drivers:
- Add support for S4 in meson RNG driver.
- Add STM32MP13x support in stm32.
- Add hwrng interface support in qcom-rng.
- Add support for deflate algorithm in hisilicon/zip.
-----BEGIN PGP SIGNATURE-----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=IZmR
-----END PGP SIGNATURE-----
Merge tag 'v6.7-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Add virtual-address based lskcipher interface
- Optimise ahash/shash performance in light of costly indirect calls
- Remove ahash alignmask attribute
Algorithms:
- Improve AES/XTS performance of 6-way unrolling for ppc
- Remove some uses of obsolete algorithms (md4, md5, sha1)
- Add FIPS 202 SHA-3 support in pkcs1pad
- Add fast path for single-page messages in adiantum
- Remove zlib-deflate
Drivers:
- Add support for S4 in meson RNG driver
- Add STM32MP13x support in stm32
- Add hwrng interface support in qcom-rng
- Add support for deflate algorithm in hisilicon/zip"
* tag 'v6.7-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (283 commits)
crypto: adiantum - flush destination page before unmapping
crypto: testmgr - move pkcs1pad(rsa,sha3-*) to correct place
Documentation/module-signing.txt: bring up to date
module: enable automatic module signing with FIPS 202 SHA-3
crypto: asymmetric_keys - allow FIPS 202 SHA-3 signatures
crypto: rsa-pkcs1pad - Add FIPS 202 SHA-3 support
crypto: FIPS 202 SHA-3 register in hash info for IMA
x509: Add OIDs for FIPS 202 SHA-3 hash and signatures
crypto: ahash - optimize performance when wrapping shash
crypto: ahash - check for shash type instead of not ahash type
crypto: hash - move "ahash wrapping shash" functions to ahash.c
crypto: talitos - stop using crypto_ahash::init
crypto: chelsio - stop using crypto_ahash::init
crypto: ahash - improve file comment
crypto: ahash - remove struct ahash_request_priv
crypto: ahash - remove crypto_ahash_alignmask
crypto: gcm - stop using alignmask of ahash
crypto: chacha20poly1305 - stop using alignmask of ahash
crypto: ccm - stop using alignmask of ahash
net: ipv6: stop checking crypto_ahash_alignmask
...
Now that the shash algorithm type does not support nonzero alignmasks,
crypto_shash_alignmask() always returns 0 and will be removed. In
preparation for this, stop checking crypto_shash_alignmask() in
net/ceph/messenger_v2.c.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Direct calls to ops->connect() can overwrite the address parameter when
used in conjunction with BPF SOCK_ADDR hooks. Recent changes to
kernel_connect() ensure that callers are insulated from such side
effects. This patch wraps the direct call to ops->connect() with
kernel_connect() to prevent unexpected changes to the address passed to
ceph_tcp_connect().
This change was originally part of a larger patch targeting the net tree
addressing all instances of unprotected calls to ops->connect()
throughout the kernel, but this change was split up into several patches
targeting various trees.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/netdev/20230821100007.559638-1-jrife@google.com/
Link: https://lore.kernel.org/netdev/9944248dba1bce861375fcce9de663934d933ba9.camel@redhat.com/
Fixes: d74bad4e74 ("bpf: Hooks for sys_connect")
Signed-off-by: Jordan Rife <jrife@google.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct ceph_monmap.
Additionally, since the element count member must be set before accessing
the annotated flexible array member, move its initialization earlier.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: Xiubo Li <xiubli@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: ceph-devel@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The header file crypto/algapi.h is for internal use only. Use the
header file crypto/utils.h instead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Currently we have some special-casing for multi-op writes, but in the
case of a read, we can't really handle it. All of the current multi-op
callers call it with CEPH_OSD_FLAG_WRITE set.
Have ceph_osdc_new_request check for CEPH_OSD_FLAG_READ and if it's set,
allocate multiple reply ops instead of multiple request ops. If neither
flag is set, return -EINVAL.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
...and record the user_version in the reply in a new field in
ceph_osd_request, so we can populate the assert_ver appropriately.
Shuffle the fields a bit too so that the new field fits in an
existing hole on x86_64.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Add an iov_iter to the unions in ceph_msg_data and ceph_msg_data_cursor.
Instead of requiring a list of pages or bvecs, we can just use an
iov_iter directly, and avoid extra allocations.
We assume that the pages represented by the iter are pinned such that
they shouldn't incur page faults, which is the case for the iov_iters
created by netfs.
While working on this, Al Viro informed me that he was going to change
iov_iter_get_pages to auto-advance the iterator as that pattern is more
or less required for ITER_PIPE anyway. We emulate that here for now by
advancing in the _next op and tracking that amount in the "lastlen"
field.
In the event that _next is called twice without an intervening
_advance, we revert the iov_iter by the remaining lastlen before
calling iov_iter_get_pages.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Have get_reply check for the presence of sparse read ops in the
request and set the sparse_read boolean in the msg. That will queue the
messenger layer to use the sparse read codepath instead of the normal
data receive.
Add a new sparse_read operation for the OSD client, driven by its own
state machine. The messenger will repeatedly call the sparse_read
operation, and it will pass back the necessary info to set up to read
the next extent of data, while zero-filling the sparse regions.
The state machine will stop at the end of the last extent, and will
attach the extent map buffer to the ceph_osd_req_op so that the caller
can use it.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Add 2 new fields to ceph_connection_v1_info to track the necessary info
in sparse reads. Skip initializing the cursor for a sparse read.
Break out read_partial_message_section into a wrapper around a new
read_partial_message_chunk function that doesn't zero out the crc first.
Add new helper functions to drive receiving into the destinations
provided by the sparse_read state machine.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Add a new init_sgs_pages helper that populates the scatterlist from
an arbitrary point in an array of pages.
Change setup_message_sgs to take an optional pointer to an array of
pages. If that's set, then the scatterlist will be set using that
array instead of the cursor.
When given a sparse read on a secure connection, decrypt the data
in-place rather than into the final destination, by passing it the
in_enc_pages array.
After decrypting, run the sparse_read state machine in a loop, copying
data from the decrypted pages until it's complete.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Add support for a new sparse_read ceph_connection operation. The idea is
that the client driver can define this operation use it to do special
handling for incoming reads.
The alloc_msg routine will look at the request and determine whether the
reply is expected to be sparse. If it is, then we'll dispatch to a
different set of state machine states that will repeatedly call the
driver's sparse_read op to get length and placement info for reading the
extent map, and the extents themselves.
This necessitates adding some new field to some other structs:
- The msg gets a new bool to track whether it's a sparse_read request.
- A new field is added to the cursor to track the amount remaining in the
current extent. This is used to cap the read from the socket into the
msg_data
- Handing a revoke with all of this is particularly difficult, so I've
added a new data_len_remain field to the v2 connection info, and then
use that to skip that much on a revoke. We may want to expand the use of
that to the normal read path as well, just for consistency's sake.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When the OSD sends back a sparse read reply, it contains an array of
these structures. Define the structure and add a couple of helpers for
dealing with them.
Also add a place in struct ceph_osd_req_op to store the extent buffer,
and code to free it if it's populated when the req is torn down.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
In a later patch, we're going to need to search for a request in
the rbtree, but taking the o_mutex is inconvenient as we already
hold the con mutex at the point where we need it.
Add a new spinlock that we take when inserting and erasing entries from
the o_requests tree. Search of the rbtree can be done with either the
mutex or the spinlock, but insertion and removal requires both.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
If the cluster becomes unavailable, ceph_osdc_notify() may hang even
with osd_request_timeout option set because linger_notify_finish_wait()
waits for MWatchNotify NOTIFY_COMPLETE message with no associated OSD
request in flight -- it's completely asynchronous.
Introduce an additional timeout, derived from the specified notify
timeout. While at it, switch both waits to killable which is more
correct.
Cc: stable@vger.kernel.org
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
- we want the exclusive lock type, so test for it directly
- use sscanf() to actually parse the lock cookie and avoid admitting
invalid handles
- bail if locker has a blank address
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
ceph_frame_desc::fd_lens is an int array. decode_preamble() thus
effectively casts u32 -> int but the checks for segment lengths are
written as if on unsigned values. While reading in HELLO or one of the
AUTH frames (before authentication is completed), arithmetic in
head_onwire_len() can get duped by negative ctrl_len and produce
head_len which is less than CEPH_PREAMBLE_LEN but still positive.
This would lead to a buffer overrun in prepare_read_control() as the
preamble gets copied to the newly allocated buffer of size head_len.
Cc: stable@vger.kernel.org
Fixes: cd1a677cad ("libceph, ceph: implement msgr2.1 protocol (crc and secure modes)")
Reported-by: Thelford Williams <thelford@google.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Fix the mishandling of MSG_DONTWAIT and also reinstates the per-page
checking of the source pages (which might have come from a DIO write by
userspace) by partially reverting the changes to support MSG_SPLICE_PAGES
and doing things a little differently. In messenger_v1:
(1) The ceph_tcp_sendpage() is resurrected and the callers reverted to use
that.
(2) The callers now pass MSG_MORE unconditionally. Previously, they were
passing in MSG_MORE|MSG_SENDPAGE_NOTLAST and then degrading that to
just MSG_MORE on the last call to ->sendpage().
(3) Make ceph_tcp_sendpage() a wrapper around sendmsg() rather than
sendpage(), setting MSG_SPLICE_PAGES if sendpage_ok() returns true on
the page.
In messenger_v2:
(4) Bring back do_try_sendpage() and make the callers use that.
(5) Make do_try_sendpage() use sendmsg() for both cases and set
MSG_SPLICE_PAGES if sendpage_ok() is set.
Fixes: 40a8c17aa7 ("ceph: Use sendmsg(MSG_SPLICE_PAGES) rather than sendpage")
Fixes: fa094ccae1 ("ceph: Use sendmsg(MSG_SPLICE_PAGES) rather than sendpage()")
Reported-by: Ilya Dryomov <idryomov@gmail.com>
Link: https://lore.kernel.org/r/CAOi1vP9vjLfk3W+AJFeexC93jqPaPUn2dD_4NrzxwoZTbYfOnw@mail.gmail.com/
Link: https://lore.kernel.org/r/CAOi1vP_Bn918j24S94MuGyn+Gxk212btw7yWeDrRcW1U8pc_BA@mail.gmail.com/
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Xiubo Li <xiubli@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Link: https://lore.kernel.org/r/3101881.1687801973@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/3111635.1687813501@warthog.procyon.org.uk/ # v2
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Link: https://lore.kernel.org/r/3199652.1687873788@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use sendmsg() and MSG_SPLICE_PAGES rather than sendpage in ceph when
transmitting data. For the moment, this can only transmit one page at a
time because of the architecture of net/ceph/, but if
write_partial_message_data() can be given a bvec[] at a time by the
iteration code, this would allow pages to be sent in a batch.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Ilya Dryomov <idryomov@gmail.com>
cc: Xiubo Li <xiubli@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Link: https://lore.kernel.org/r/20230623225513.2732256-5-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use sendmsg() and MSG_SPLICE_PAGES rather than sendpage in ceph when
transmitting data. For the moment, this can only transmit one page at a
time because of the architecture of net/ceph/, but if
write_partial_message_data() can be given a bvec[] at a time by the
iteration code, this would allow pages to be sent in a batch.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Ilya Dryomov <idryomov@gmail.com>
cc: Xiubo Li <xiubli@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Link: https://lore.kernel.org/r/20230623225513.2732256-4-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Core
----
- Add dedicated kmem_cache for typical/small skb->head, avoid having
to access struct page at kfree time, and improve memory use.
- Introduce sysctl to set default RPS configuration for new netdevs.
- Define Netlink protocol specification format which can be used
to describe messages used by each family and auto-generate parsers.
Add tools for generating kernel data structures and uAPI headers.
- Expose all net/core sysctls inside netns.
- Remove 4s sleep in netpoll if carrier is instantly detected on boot.
- Add configurable limit of MDB entries per port, and port-vlan.
- Continue populating drop reasons throughout the stack.
- Retire a handful of legacy Qdiscs and classifiers.
Protocols
---------
- Support IPv4 big TCP (TSO frames larger than 64kB).
- Add IP_LOCAL_PORT_RANGE socket option, to control local port range
on socket by socket basis.
- Track and report in procfs number of MPTCP sockets used.
- Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP
path manager.
- IPv6: don't check net.ipv6.route.max_size and rely on garbage
collection to free memory (similarly to IPv4).
- Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).
- ICMP: add per-rate limit counters.
- Add support for user scanning requests in ieee802154.
- Remove static WEP support.
- Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
reporting.
- WiFi 7 EHT channel puncturing support (client & AP).
BPF
---
- Add a rbtree data structure following the "next-gen data structure"
precedent set by recently added linked list, that is, by using
kfunc + kptr instead of adding a new BPF map type.
- Expose XDP hints via kfuncs with initial support for RX hash and
timestamp metadata.
- Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key
to better support decap on GRE tunnel devices not operating
in collect metadata.
- Improve x86 JIT's codegen for PROBE_MEM runtime error checks.
- Remove the need for trace_printk_lock for bpf_trace_printk
and bpf_trace_vprintk helpers.
- Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case.
- Significantly reduce the search time for module symbols
by livepatch and BPF.
- Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs in
different time intervals.
- Add support for BPF trampoline on s390x and riscv64.
- Add capability to export the XDP features supported by the NIC.
- Add __bpf_kfunc tag for marking kernel functions as kfuncs.
- Add cgroup.memory=nobpf kernel parameter option to disable BPF
memory accounting for container environments.
Netfilter
---------
- Remove the CLUSTERIP target. It has been marked as obsolete
for years, and we still have WARN splats wrt. races of
the out-of-band /proc interface installed by this target.
- Add 'destroy' commands to nf_tables. They are identical to
the existing 'delete' commands, but do not return an error if
the referenced object (set, chain, rule...) did not exist.
Driver API
----------
- Improve cpumask_local_spread() locality to help NICs set the right
IRQ affinity on AMD platforms.
- Separate C22 and C45 MDIO bus transactions more clearly.
- Introduce new DCB table to control DSCP rewrite on egress.
- Support configuration of Physical Layer Collision Avoidance (PLCA)
Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
shared medium Ethernet.
- Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
preemption of low priority frames by high priority frames.
- Add support for controlling MACSec offload using netlink SET.
- Rework devlink instance refcounts to allow registration and
de-registration under the instance lock. Split the code into multiple
files, drop some of the unnecessarily granular locks and factor out
common parts of netlink operation handling.
- Add TX frame aggregation parameters (for USB drivers).
- Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
messages with notifications for debug.
- Allow offloading of UDP NEW connections via act_ct.
- Add support for per action HW stats in TC.
- Support hardware miss to TC action (continue processing in SW from
a specific point in the action chain).
- Warn if old Wireless Extension user space interface is used with
modern cfg80211/mac80211 drivers. Do not support Wireless Extensions
for Wi-Fi 7 devices at all. Everyone should switch to using nl80211
interface instead.
- Improve the CAN bit timing configuration. Use extack to return error
messages directly to user space, update the SJW handling, including
the definition of a new default value that will benefit CAN-FD
controllers, by increasing their oscillator tolerance.
New hardware / drivers
----------------------
- Ethernet:
- nVidia BlueField-3 support (control traffic driver)
- Ethernet support for imx93 SoCs
- Motorcomm yt8531 gigabit Ethernet PHY
- onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
- Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
- Amlogic gxl MDIO mux
- WiFi:
- RealTek RTL8188EU (rtl8xxxu)
- Qualcomm Wi-Fi 7 devices (ath12k)
- CAN:
- Renesas R-Car V4H
Drivers
-------
- Bluetooth:
- Set Per Platform Antenna Gain (PPAG) for Intel controllers.
- Ethernet NICs:
- Intel (1G, igc):
- support TSN / Qbv / packet scheduling features of i226 model
- Intel (100G, ice):
- use GNSS subsystem instead of TTY
- multi-buffer XDP support
- extend support for GPIO pins to E823 devices
- nVidia/Mellanox:
- update the shared buffer configuration on PFC commands
- implement PTP adjphase function for HW offset control
- TC support for Geneve and GRE with VF tunnel offload
- more efficient crypto key management method
- multi-port eswitch support
- Netronome/Corigine:
- add DCB IEEE support
- support IPsec offloading for NFP3800
- Freescale/NXP (enetc):
- enetc: support XDP_REDIRECT for XDP non-linear buffers
- enetc: improve reconfig, avoid link flap and waiting for idle
- enetc: support MAC Merge layer
- Other NICs:
- sfc/ef100: add basic devlink support for ef100
- ionic: rx_push mode operation (writing descriptors via MMIO)
- bnxt: use the auxiliary bus abstraction for RDMA
- r8169: disable ASPM and reset bus in case of tx timeout
- cpsw: support QSGMII mode for J721e CPSW9G
- cpts: support pulse-per-second output
- ngbe: add an mdio bus driver
- usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
- r8152: handle devices with FW with NCM support
- amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
- virtio-net: support multi buffer XDP
- virtio/vsock: replace virtio_vsock_pkt with sk_buff
- tsnep: XDP support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add support for latency TLV (in FW control messages)
- Microchip (sparx5):
- separate explicit and implicit traffic forwarding rules, make
the implicit rules always active
- add support for egress DSCP rewrite
- IS0 VCAP support (Ingress Classification)
- IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.)
- ES2 VCAP support (Egress Access Control)
- support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- add MAB (port auth) offload support
- enable PTP receive for mv88e6390
- NXP (ocelot):
- support MAC Merge layer
- support for the the vsc7512 internal copper phys
- Microchip:
- lan9303: convert to PHYLINK
- lan966x: support TC flower filter statistics
- lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
- lan937x: support Credit Based Shaper configuration
- ksz9477: support Energy Efficient Ethernet
- other:
- qca8k: convert to regmap read/write API, use bulk operations
- rswitch: Improve TX timestamp accuracy
- Intel WiFi (iwlwifi):
- EHT (Wi-Fi 7) rate reporting
- STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware.
- Qualcomm 802.11ax WiFi (ath11k):
- IPQ5018 support
- Fine Timing Measurement (FTM) responder role support
- channel 177 support
- MediaTek WiFi (mt76):
- per-PHY LED support
- mt7996: EHT (Wi-Fi 7) support
- Wireless Ethernet Dispatch (WED) reset support
- switch to using page pool allocator
- RealTek WiFi (rtw89):
- support new version of Bluetooth co-existance
- Mobile:
- rmnet: support TX aggregation.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=xXhC
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Add dedicated kmem_cache for typical/small skb->head, avoid having
to access struct page at kfree time, and improve memory use.
- Introduce sysctl to set default RPS configuration for new netdevs.
- Define Netlink protocol specification format which can be used to
describe messages used by each family and auto-generate parsers.
Add tools for generating kernel data structures and uAPI headers.
- Expose all net/core sysctls inside netns.
- Remove 4s sleep in netpoll if carrier is instantly detected on
boot.
- Add configurable limit of MDB entries per port, and port-vlan.
- Continue populating drop reasons throughout the stack.
- Retire a handful of legacy Qdiscs and classifiers.
Protocols:
- Support IPv4 big TCP (TSO frames larger than 64kB).
- Add IP_LOCAL_PORT_RANGE socket option, to control local port range
on socket by socket basis.
- Track and report in procfs number of MPTCP sockets used.
- Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
manager.
- IPv6: don't check net.ipv6.route.max_size and rely on garbage
collection to free memory (similarly to IPv4).
- Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).
- ICMP: add per-rate limit counters.
- Add support for user scanning requests in ieee802154.
- Remove static WEP support.
- Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
reporting.
- WiFi 7 EHT channel puncturing support (client & AP).
BPF:
- Add a rbtree data structure following the "next-gen data structure"
precedent set by recently added linked list, that is, by using
kfunc + kptr instead of adding a new BPF map type.
- Expose XDP hints via kfuncs with initial support for RX hash and
timestamp metadata.
- Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
better support decap on GRE tunnel devices not operating in collect
metadata.
- Improve x86 JIT's codegen for PROBE_MEM runtime error checks.
- Remove the need for trace_printk_lock for bpf_trace_printk and
bpf_trace_vprintk helpers.
- Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case.
- Significantly reduce the search time for module symbols by
livepatch and BPF.
- Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs in
different time intervals.
- Add support for BPF trampoline on s390x and riscv64.
- Add capability to export the XDP features supported by the NIC.
- Add __bpf_kfunc tag for marking kernel functions as kfuncs.
- Add cgroup.memory=nobpf kernel parameter option to disable BPF
memory accounting for container environments.
Netfilter:
- Remove the CLUSTERIP target. It has been marked as obsolete for
years, and we still have WARN splats wrt races of the out-of-band
/proc interface installed by this target.
- Add 'destroy' commands to nf_tables. They are identical to the
existing 'delete' commands, but do not return an error if the
referenced object (set, chain, rule...) did not exist.
Driver API:
- Improve cpumask_local_spread() locality to help NICs set the right
IRQ affinity on AMD platforms.
- Separate C22 and C45 MDIO bus transactions more clearly.
- Introduce new DCB table to control DSCP rewrite on egress.
- Support configuration of Physical Layer Collision Avoidance (PLCA)
Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
shared medium Ethernet.
- Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
preemption of low priority frames by high priority frames.
- Add support for controlling MACSec offload using netlink SET.
- Rework devlink instance refcounts to allow registration and
de-registration under the instance lock. Split the code into
multiple files, drop some of the unnecessarily granular locks and
factor out common parts of netlink operation handling.
- Add TX frame aggregation parameters (for USB drivers).
- Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
messages with notifications for debug.
- Allow offloading of UDP NEW connections via act_ct.
- Add support for per action HW stats in TC.
- Support hardware miss to TC action (continue processing in SW from
a specific point in the action chain).
- Warn if old Wireless Extension user space interface is used with
modern cfg80211/mac80211 drivers. Do not support Wireless
Extensions for Wi-Fi 7 devices at all. Everyone should switch to
using nl80211 interface instead.
- Improve the CAN bit timing configuration. Use extack to return
error messages directly to user space, update the SJW handling,
including the definition of a new default value that will benefit
CAN-FD controllers, by increasing their oscillator tolerance.
New hardware / drivers:
- Ethernet:
- nVidia BlueField-3 support (control traffic driver)
- Ethernet support for imx93 SoCs
- Motorcomm yt8531 gigabit Ethernet PHY
- onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
- Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
- Amlogic gxl MDIO mux
- WiFi:
- RealTek RTL8188EU (rtl8xxxu)
- Qualcomm Wi-Fi 7 devices (ath12k)
- CAN:
- Renesas R-Car V4H
Drivers:
- Bluetooth:
- Set Per Platform Antenna Gain (PPAG) for Intel controllers.
- Ethernet NICs:
- Intel (1G, igc):
- support TSN / Qbv / packet scheduling features of i226 model
- Intel (100G, ice):
- use GNSS subsystem instead of TTY
- multi-buffer XDP support
- extend support for GPIO pins to E823 devices
- nVidia/Mellanox:
- update the shared buffer configuration on PFC commands
- implement PTP adjphase function for HW offset control
- TC support for Geneve and GRE with VF tunnel offload
- more efficient crypto key management method
- multi-port eswitch support
- Netronome/Corigine:
- add DCB IEEE support
- support IPsec offloading for NFP3800
- Freescale/NXP (enetc):
- support XDP_REDIRECT for XDP non-linear buffers
- improve reconfig, avoid link flap and waiting for idle
- support MAC Merge layer
- Other NICs:
- sfc/ef100: add basic devlink support for ef100
- ionic: rx_push mode operation (writing descriptors via MMIO)
- bnxt: use the auxiliary bus abstraction for RDMA
- r8169: disable ASPM and reset bus in case of tx timeout
- cpsw: support QSGMII mode for J721e CPSW9G
- cpts: support pulse-per-second output
- ngbe: add an mdio bus driver
- usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
- r8152: handle devices with FW with NCM support
- amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
- virtio-net: support multi buffer XDP
- virtio/vsock: replace virtio_vsock_pkt with sk_buff
- tsnep: XDP support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add support for latency TLV (in FW control messages)
- Microchip (sparx5):
- separate explicit and implicit traffic forwarding rules, make
the implicit rules always active
- add support for egress DSCP rewrite
- IS0 VCAP support (Ingress Classification)
- IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
etc.)
- ES2 VCAP support (Egress Access Control)
- support for Per-Stream Filtering and Policing (802.1Q,
8.6.5.1)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- add MAB (port auth) offload support
- enable PTP receive for mv88e6390
- NXP (ocelot):
- support MAC Merge layer
- support for the the vsc7512 internal copper phys
- Microchip:
- lan9303: convert to PHYLINK
- lan966x: support TC flower filter statistics
- lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
- lan937x: support Credit Based Shaper configuration
- ksz9477: support Energy Efficient Ethernet
- other:
- qca8k: convert to regmap read/write API, use bulk operations
- rswitch: Improve TX timestamp accuracy
- Intel WiFi (iwlwifi):
- EHT (Wi-Fi 7) rate reporting
- STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware.
- Qualcomm 802.11ax WiFi (ath11k):
- IPQ5018 support
- Fine Timing Measurement (FTM) responder role support
- channel 177 support
- MediaTek WiFi (mt76):
- per-PHY LED support
- mt7996: EHT (Wi-Fi 7) support
- Wireless Ethernet Dispatch (WED) reset support
- switch to using page pool allocator
- RealTek WiFi (rtw89):
- support new version of Bluetooth co-existance
- Mobile:
- rmnet: support TX aggregation"
* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
page_pool: add a comment explaining the fragment counter usage
net: ethtool: fix __ethtool_dev_mm_supported() implementation
ethtool: pse-pd: Fix double word in comments
xsk: add linux/vmalloc.h to xsk.c
sefltests: netdevsim: wait for devlink instance after netns removal
selftest: fib_tests: Always cleanup before exit
net/mlx5e: Align IPsec ASO result memory to be as required by hardware
net/mlx5e: TC, Set CT miss to the specific ct action instance
net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
net/mlx5: Refactor tc miss handling to a single function
net/mlx5: Kconfig: Make tc offload depend on tc skb extension
net/sched: flower: Support hardware miss to tc action
net/sched: flower: Move filter handle initialization earlier
net/sched: cls_api: Support hardware miss to tc action
net/sched: Rename user cookie and act cookie
sfc: fix builds without CONFIG_RTC_LIB
sfc: clean up some inconsistent indentings
net/mlx4_en: Introduce flexible array to silence overflow warning
net: lan966x: Fix possible deadlock inside PTP
net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
...
As suggested by Cong, introduce a tracepoint for all ->sk_data_ready()
callback implementations. For example:
<...>
iperf-609 [002] ..... 70.660425: sk_data_ready: family=2 protocol=6 func=sock_def_readable
iperf-609 [002] ..... 70.660436: sk_data_ready: family=2 protocol=6 func=sock_def_readable
<...>
Suggested-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since moving to memalloc_nofs_save/restore, SUNRPC has stopped setting the
GFP_NOIO flag on sk_allocation which the networking system uses to decide
when it is safe to use current->task_frag. The results of this are
unexpected corruption in task_frag when SUNRPC is involved in memory
reclaim.
The corruption can be seen in crashes, but the root cause is often
difficult to ascertain as a crashing machine's stack trace will have no
evidence of being near NFS or SUNRPC code. I believe this problem to
be much more pervasive than reports to the community may indicate.
Fix this by having kernel users of sockets that may corrupt task_frag due
to reclaim set sk_use_task_frag = false. Preemptively correcting this
situation for users that still set sk_allocation allows them to convert to
memalloc_nofs_save/restore without the same unexpected corruptions that are
sure to follow, unlikely to show up in testing, and difficult to bisect.
CC: Philipp Reisner <philipp.reisner@linbit.com>
CC: Lars Ellenberg <lars.ellenberg@linbit.com>
CC: "Christoph Böhmwalder" <christoph.boehmwalder@linbit.com>
CC: Jens Axboe <axboe@kernel.dk>
CC: Josef Bacik <josef@toxicpanda.com>
CC: Keith Busch <kbusch@kernel.org>
CC: Christoph Hellwig <hch@lst.de>
CC: Sagi Grimberg <sagi@grimberg.me>
CC: Lee Duncan <lduncan@suse.com>
CC: Chris Leech <cleech@redhat.com>
CC: Mike Christie <michael.christie@oracle.com>
CC: "James E.J. Bottomley" <jejb@linux.ibm.com>
CC: "Martin K. Petersen" <martin.petersen@oracle.com>
CC: Valentina Manea <valentina.manea.m@gmail.com>
CC: Shuah Khan <shuah@kernel.org>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC: David Howells <dhowells@redhat.com>
CC: Marc Dionne <marc.dionne@auristor.com>
CC: Steve French <sfrench@samba.org>
CC: Christine Caulfield <ccaulfie@redhat.com>
CC: David Teigland <teigland@redhat.com>
CC: Mark Fasheh <mark@fasheh.com>
CC: Joel Becker <jlbec@evilplan.org>
CC: Joseph Qi <joseph.qi@linux.alibaba.com>
CC: Eric Van Hensbergen <ericvh@gmail.com>
CC: Latchesar Ionkov <lucho@ionkov.net>
CC: Dominique Martinet <asmadeus@codewreck.org>
CC: Ilya Dryomov <idryomov@gmail.com>
CC: Xiubo Li <xiubli@redhat.com>
CC: Chuck Lever <chuck.lever@oracle.com>
CC: Jeff Layton <jlayton@kernel.org>
CC: Trond Myklebust <trond.myklebust@hammerspace.com>
CC: Anna Schumaker <anna@kernel.org>
CC: Steffen Klassert <steffen.klassert@secunet.com>
CC: Herbert Xu <herbert@gondor.apana.org.au>
Suggested-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
direction misannotations and (hopefully) preventing
more of the same for the future.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHQEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCY5ZzQAAKCRBZ7Krx/gZQ
65RZAP4nTkvOn0NZLVFkuGOx8pgJelXAvrteyAuecVL8V6CR4AD40qCVY51PJp8N
MzwiRTeqnGDxTTF7mgd//IB6hoatAA==
=bcvF
-----END PGP SIGNATURE-----
Merge tag 'pull-iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull iov_iter updates from Al Viro:
"iov_iter work; most of that is about getting rid of direction
misannotations and (hopefully) preventing more of the same for the
future"
* tag 'pull-iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
use less confusing names for iov_iter direction initializers
iov_iter: saner checks for attempt to copy to/from iterator
[xen] fix "direction" argument of iov_iter_kvec()
[vhost] fix 'direction' argument of iov_iter_{init,bvec}()
[target] fix iov_iter_bvec() "direction" argument
[s390] memcpy_real(): WRITE is "data source", not destination...
[s390] zcore: WRITE is "data source", not destination...
[infiniband] READ is "data destination", not source...
[fsi] WRITE is "data source", not destination...
[s390] copy_oldmem_kernel() - WRITE is "data source", not destination
csum_and_copy_to_iter(): handle ITER_DISCARD
get rid of unlikely() on page_copy_sane() calls
READ/WRITE proved to be actively confusing - the meanings are
"data destination, as used with read(2)" and "data source, as
used with write(2)", but people keep interpreting those as
"we read data from it" and "we write data to it", i.e. exactly
the wrong way.
Call them ITER_DEST and ITER_SOURCE - at least that is harder
to misinterpret...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This is a simple mechanical transformation done by:
@@
expression E;
@@
- prandom_u32_max
+ get_random_u32_below
(E)
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs
Reviewed-by: SeongJae Park <sj@kernel.org> # for damon
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> # for infiniband
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> # for arm
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-----BEGIN PGP SIGNATURE-----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=M+mV
-----END PGP SIGNATURE-----
Merge tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull more random number generator updates from Jason Donenfeld:
"This time with some large scale treewide cleanups.
The intent of this pull is to clean up the way callers fetch random
integers. The current rules for doing this right are:
- If you want a secure or an insecure random u64, use get_random_u64()
- If you want a secure or an insecure random u32, use get_random_u32()
The old function prandom_u32() has been deprecated for a while
now and is just a wrapper around get_random_u32(). Same for
get_random_int().
- If you want a secure or an insecure random u16, use get_random_u16()
- If you want a secure or an insecure random u8, use get_random_u8()
- If you want secure or insecure random bytes, use get_random_bytes().
The old function prandom_bytes() has been deprecated for a while
now and has long been a wrapper around get_random_bytes()
- If you want a non-uniform random u32, u16, or u8 bounded by a
certain open interval maximum, use prandom_u32_max()
I say "non-uniform", because it doesn't do any rejection sampling
or divisions. Hence, it stays within the prandom_*() namespace, not
the get_random_*() namespace.
I'm currently investigating a "uniform" function for 6.2. We'll see
what comes of that.
By applying these rules uniformly, we get several benefits:
- By using prandom_u32_max() with an upper-bound that the compiler
can prove at compile-time is ≤65536 or ≤256, internally
get_random_u16() or get_random_u8() is used, which wastes fewer
batched random bytes, and hence has higher throughput.
- By using prandom_u32_max() instead of %, when the upper-bound is
not a constant, division is still avoided, because
prandom_u32_max() uses a faster multiplication-based trick instead.
- By using get_random_u16() or get_random_u8() in cases where the
return value is intended to indeed be a u16 or a u8, we waste fewer
batched random bytes, and hence have higher throughput.
This series was originally done by hand while I was on an airplane
without Internet. Later, Kees and I worked on retroactively figuring
out what could be done with Coccinelle and what had to be done
manually, and then we split things up based on that.
So while this touches a lot of files, the actual amount of code that's
hand fiddled is comfortably small"
* tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
prandom: remove unused functions
treewide: use get_random_bytes() when possible
treewide: use get_random_u32() when possible
treewide: use get_random_{u8,u16}() when possible, part 2
treewide: use get_random_{u8,u16}() when possible, part 1
treewide: use prandom_u32_max() when possible, part 2
treewide: use prandom_u32_max() when possible, part 1
Rather than incurring a division or requesting too many random bytes for
the given range, use the prandom_u32_max() function, which only takes
the minimum required bytes from the RNG and avoids divisions. This was
done mechanically with this coccinelle script:
@basic@
expression E;
type T;
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
typedef u64;
@@
(
- ((T)get_random_u32() % (E))
+ prandom_u32_max(E)
|
- ((T)get_random_u32() & ((E) - 1))
+ prandom_u32_max(E * XXX_MAKE_SURE_E_IS_POW2)
|
- ((u64)(E) * get_random_u32() >> 32)
+ prandom_u32_max(E)
|
- ((T)get_random_u32() & ~PAGE_MASK)
+ prandom_u32_max(PAGE_SIZE)
)
@multi_line@
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
identifier RAND;
expression E;
@@
- RAND = get_random_u32();
... when != RAND
- RAND %= (E);
+ RAND = prandom_u32_max(E);
// Find a potential literal
@literal_mask@
expression LITERAL;
type T;
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
position p;
@@
((T)get_random_u32()@p & (LITERAL))
// Add one to the literal.
@script:python add_one@
literal << literal_mask.LITERAL;
RESULT;
@@
value = None
if literal.startswith('0x'):
value = int(literal, 16)
elif literal[0] in '123456789':
value = int(literal, 10)
if value is None:
print("I don't know how to handle %s" % (literal))
cocci.include_match(False)
elif value == 2**32 - 1 or value == 2**31 - 1 or value == 2**24 - 1 or value == 2**16 - 1 or value == 2**8 - 1:
print("Skipping 0x%x for cleanup elsewhere" % (value))
cocci.include_match(False)
elif value & (value + 1) != 0:
print("Skipping 0x%x because it's not a power of two minus one" % (value))
cocci.include_match(False)
elif literal.startswith('0x'):
coccinelle.RESULT = cocci.make_expr("0x%x" % (value + 1))
else:
coccinelle.RESULT = cocci.make_expr("%d" % (value + 1))
// Replace the literal mask with the calculated result.
@plus_one@
expression literal_mask.LITERAL;
position literal_mask.p;
expression add_one.RESULT;
identifier FUNC;
@@
- (FUNC()@p & (LITERAL))
+ prandom_u32_max(RESULT)
@collapse_ret@
type T;
identifier VAR;
expression E;
@@
{
- T VAR;
- VAR = (E);
- return VAR;
+ return E;
}
@drop_var@
type T;
identifier VAR;
@@
{
- T VAR;
... when != VAR
}
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: KP Singh <kpsingh@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz> # for ext4 and sbitmap
Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> # for drbd
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc
Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
ceph_msg_data_next is always passed a NULL pointer for this field. Some
of the "next" operations look at it in order to determine the length,
but we can just take the min of the data on the page or cursor->resid.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
This function always returns 0, and ignores the nofail boolean. Drop the
nofail argument, make the function void return and fix up the callers.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The double `without' is duplicated in the comment, remove one.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
It should be better to check pointer firstly, then assign it
to c->rules[]. Refine code a little bit.
Signed-off-by: Li Qiong <liqiong@nfschina.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Fix the following coccicheck warning:
net/ceph/crush/mapper.c:1077:8-9: WARNING opportunity for swap()
by using swap() for the swapping of variable values and drop
the tmp variable that is not needed any more.
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
cancel_request() never guaranteed that after its return the OSD
client would be completely done with the OSD request. The callback
(if specified) can still be invoked and a ref can still be held.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
request_reinit() is not only ugly as the comment rightfully suggests,
but also unsafe. Even though it is called with osdc->lock held for
write in all cases, resetting the OSD request refcount can still race
with handle_reply() and result in use-after-free. Taking linger ping
as an example:
handle_timeout thread handle_reply thread
down_read(&osdc->lock)
req = lookup_request(...)
...
finish_request(req) # unregisters
up_read(&osdc->lock)
__complete_request(req)
linger_ping_cb(req)
# req->r_kref == 2 because handle_reply still holds its ref
down_write(&osdc->lock)
send_linger_ping(lreq)
req = lreq->ping_req # same req
# cancel_linger_request is NOT
# called - handle_reply already
# unregistered
request_reinit(req)
WARN_ON(req->r_kref != 1) # fires
request_init(req)
kref_init(req->r_kref)
# req->r_kref == 1 after kref_init
ceph_osdc_put_request(req)
kref_put(req->r_kref)
# req->r_kref == 0 after kref_put, req is freed
<further req initialization/use> !!!
This happens because send_linger_ping() always (re)uses the same OSD
request for watch ping requests, relying on cancel_linger_request() to
unregister it from the OSD client and rip its messages out from the
messenger. send_linger() does the same for watch/notify registration
and watch reconnect requests. Unfortunately cancel_request() doesn't
guarantee that after it returns the OSD client would be completely done
with the OSD request -- a ref could still be held and the callback (if
specified) could still be invoked too.
The original motivation for request_reinit() was inability to deal with
allocation failures in send_linger() and send_linger_ping(). Switching
to using osdc->req_mempool (currently only used by CephFS) respects that
and allows us to get rid of request_reinit().
Cc: stable@vger.kernel.org
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Acked-by: Jeff Layton <jlayton@kernel.org>
Just call set_in_bvec in the non-conditional part.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Both msgr1 and msgr2 in crc mode are zero copy in the sense that
message data is read from the socket directly into the destination
buffer. We assume that the destination buffer is stable (i.e. remains
unchanged while it is being read to) though. Otherwise, CRC errors
ensue:
libceph: read_partial_message 0000000048edf8ad data crc 1063286393 != exp. 228122706
libceph: osd1 (1)192.168.122.1:6843 bad crc/signature
libceph: bad data crc, calculated 57958023, expected 1805382778
libceph: osd2 (2)192.168.122.1:6876 integrity error, bad crc
Introduce rxbounce option to enable use of a bounce buffer when
receiving message data. In particular this is needed if a mapped
image is a Windows VM disk, passed to QEMU. Windows has a system-wide
"dummy" page that may be mapped into the destination buffer (potentially
more than once into the same buffer) by the Windows Memory Manager in
an effort to generate a single large I/O [1][2]. QEMU makes a point of
preserving overlap relationships when cloning I/O vectors, so krbd gets
exposed to this behaviour.
[1] "What Is Really in That MDL?"
https://docs.microsoft.com/en-us/previous-versions/windows/hardware/design/dn614012(v=vs.85)
[2] https://blogs.msmvps.com/kernelmustard/2005/05/04/dummy-pages/
URL: https://bugzilla.redhat.com/show_bug.cgi?id=1973317
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
