mirror of
https://github.com/torvalds/linux.git
synced 2024-09-20 06:53:04 +00:00
master
5 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Jinjie Ruan
|
edb907a613 |
crash: fix riscv64 crash memory reserve dead loop
On RISCV64 Qemu machine with 512MB memory, cmdline "crashkernel=500M,high"
will cause system stall as below:
Zone ranges:
DMA32 [mem 0x0000000080000000-0x000000009fffffff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000080000000-0x000000008005ffff]
node 0: [mem 0x0000000080060000-0x000000009fffffff]
Initmem setup node 0 [mem 0x0000000080000000-0x000000009fffffff]
(stall here)
commit 5d99cadf1568 ("crash: fix x86_32 crash memory reserve dead loop
bug") fix this on 32-bit architecture. However, the problem is not
completely solved. If `CRASH_ADDR_LOW_MAX = CRASH_ADDR_HIGH_MAX` on
64-bit architecture, for example, when system memory is equal to
CRASH_ADDR_LOW_MAX on RISCV64, the following infinite loop will also
occur:
-> reserve_crashkernel_generic() and high is true
-> alloc at [CRASH_ADDR_LOW_MAX, CRASH_ADDR_HIGH_MAX] fail
-> alloc at [0, CRASH_ADDR_LOW_MAX] fail and repeatedly
(because CRASH_ADDR_LOW_MAX = CRASH_ADDR_HIGH_MAX).
As Catalin suggested, do not remove the ",high" reservation fallback to
",low" logic which will change arm64's kdump behavior, but fix it by
skipping the above situation similar to commit d2f32f23190b ("crash: fix
x86_32 crash memory reserve dead loop").
After this patch, it print:
cannot allocate crashkernel (size:0x1f400000)
Link: https://lkml.kernel.org/r/20240812062017.2674441-1-ruanjinjie@huawei.com
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Dave Young <dyoung@redhat.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
Wenchao Hao
|
5eb1911a8c |
crash: remove header files which are included more than once
Following warning is reported, so remove these duplicated header including: ./kernel/crash_reserve.c: linux/kexec.h is included more than once. This is just a clean code, no logic changed. Link: https://lkml.kernel.org/r/20240606091427.3512314-1-haowenchao22@gmail.com Signed-off-by: Wenchao Hao <haowenchao22@gmail.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Baoquan He
|
4707c13de3 |
crash: add prefix for crash dumping messages
Add pr_fmt() to kernel/crash_core.c to add the module name to debugging message printed as prefix. And also add prefix 'crashkernel:' to two lines of message printing code in kernel/crash_reserve.c. In kernel/crash_reserve.c, almost all debugging messages have 'crashkernel:' prefix or there's keyword crashkernel at the beginning or in the middle, adding pr_fmt() makes it redundant. Link: https://lkml.kernel.org/r/20240418035843.1562887-1-bhe@redhat.com Signed-off-by: Baoquan He <bhe@redhat.com> Cc: Dave Young <dyoung@redhat.com> Cc: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Baoquan He
|
32fbe52465 |
crash: use macro to add crashk_res into iomem early for specific arch
There are regression reports[1][2] that crashkernel region on x86_64 can't be added into iomem tree sometime. This causes the later failure of kdump loading. This happened after commit |
||
|
Baoquan He
|
85fcde402d |
kexec: split crashkernel reservation code out from crash_core.c
Patch series "Split crash out from kexec and clean up related config items", v3. Motivation: ============= Previously, LKP reported a building error. When investigating, it can't be resolved reasonablly with the present messy kdump config items. https://lore.kernel.org/oe-kbuild-all/202312182200.Ka7MzifQ-lkp@intel.com/ The kdump (crash dumping) related config items could causes confusions: Firstly, CRASH_CORE enables codes including - crashkernel reservation; - elfcorehdr updating; - vmcoreinfo exporting; - crash hotplug handling; Now fadump of powerpc, kcore dynamic debugging and kdump all selects CRASH_CORE, while fadump - fadump needs crashkernel parsing, vmcoreinfo exporting, and accessing global variable 'elfcorehdr_addr'; - kcore only needs vmcoreinfo exporting; - kdump needs all of the current kernel/crash_core.c. So only enabling PROC_CORE or FA_DUMP will enable CRASH_CORE, this mislead people that we enable crash dumping, actual it's not. Secondly, It's not reasonable to allow KEXEC_CORE select CRASH_CORE. Because KEXEC_CORE enables codes which allocate control pages, copy kexec/kdump segments, and prepare for switching. These codes are shared by both kexec reboot and kdump. We could want kexec reboot, but disable kdump. In that case, CRASH_CORE should not be selected. -------------------- CONFIG_CRASH_CORE=y CONFIG_KEXEC_CORE=y CONFIG_KEXEC=y CONFIG_KEXEC_FILE=y --------------------- Thirdly, It's not reasonable to allow CRASH_DUMP select KEXEC_CORE. That could make KEXEC_CORE, CRASH_DUMP are enabled independently from KEXEC or KEXEC_FILE. However, w/o KEXEC or KEXEC_FILE, the KEXEC_CORE code built in doesn't make any sense because no kernel loading or switching will happen to utilize the KEXEC_CORE code. --------------------- CONFIG_CRASH_CORE=y CONFIG_KEXEC_CORE=y CONFIG_CRASH_DUMP=y --------------------- In this case, what is worse, on arch sh and arm, KEXEC relies on MMU, while CRASH_DUMP can still be enabled when !MMU, then compiling error is seen as the lkp test robot reported in above link. ------arch/sh/Kconfig------ config ARCH_SUPPORTS_KEXEC def_bool MMU config ARCH_SUPPORTS_CRASH_DUMP def_bool BROKEN_ON_SMP --------------------------- Changes: =========== 1, split out crash_reserve.c from crash_core.c; 2, split out vmcore_infoc. from crash_core.c; 3, move crash related codes in kexec_core.c into crash_core.c; 4, remove dependency of FA_DUMP on CRASH_DUMP; 5, clean up kdump related config items; 6, wrap up crash codes in crash related ifdefs on all 8 arch-es which support crash dumping, except of ppc; Achievement: =========== With above changes, I can rearrange the config item logic as below (the right item depends on or is selected by the left item): PROC_KCORE -----------> VMCORE_INFO |----------> VMCORE_INFO FA_DUMP----| |----------> CRASH_RESERVE ---->VMCORE_INFO / |---->CRASH_RESERVE KEXEC --| /| |--> KEXEC_CORE--> CRASH_DUMP-->/-|---->PROC_VMCORE KEXEC_FILE --| \ | \---->CRASH_HOTPLUG KEXEC --| |--> KEXEC_CORE (for kexec reboot only) KEXEC_FILE --| Test ======== On all 8 architectures, including x86_64, arm64, s390x, sh, arm, mips, riscv, loongarch, I did below three cases of config item setting and building all passed. Take configs on x86_64 as exampmle here: (1) Both CONFIG_KEXEC and KEXEC_FILE is unset, then all kexec/kdump items are unset automatically: # Kexec and crash features # CONFIG_KEXEC is not set # CONFIG_KEXEC_FILE is not set # end of Kexec and crash features (2) set CONFIG_KEXEC_FILE and 'make olddefconfig': --------------- # Kexec and crash features CONFIG_CRASH_RESERVE=y CONFIG_VMCORE_INFO=y CONFIG_KEXEC_CORE=y CONFIG_KEXEC_FILE=y CONFIG_CRASH_DUMP=y CONFIG_CRASH_HOTPLUG=y CONFIG_CRASH_MAX_MEMORY_RANGES=8192 # end of Kexec and crash features --------------- (3) unset CONFIG_CRASH_DUMP in case 2 and execute 'make olddefconfig': ------------------------ # Kexec and crash features CONFIG_KEXEC_CORE=y CONFIG_KEXEC_FILE=y # end of Kexec and crash features ------------------------ Note: For ppc, it needs investigation to make clear how to split out crash code in arch folder. Hope Hari and Pingfan can help have a look, see if it's doable. Now, I make it either have both kexec and crash enabled, or disable both of them altogether. This patch (of 14): Both kdump and fa_dump of ppc rely on crashkernel reservation. Move the relevant codes into separate files: crash_reserve.c, include/linux/crash_reserve.h. And also add config item CRASH_RESERVE to control its enabling of the codes. And update config items which has relationship with crashkernel reservation. And also change ifdeffery from CONFIG_CRASH_CORE to CONFIG_CRASH_RESERVE when those scopes are only crashkernel reservation related. And also rename arch/XXX/include/asm/{crash_core.h => crash_reserve.h} on arm64, x86 and risc-v because those architectures' crash_core.h is only related to crashkernel reservation. [akpm@linux-foundation.org: s/CRASH_RESEERVE/CRASH_RESERVE/, per Klara Modin] Link: https://lkml.kernel.org/r/20240124051254.67105-1-bhe@redhat.com Link: https://lkml.kernel.org/r/20240124051254.67105-2-bhe@redhat.com Signed-off-by: Baoquan He <bhe@redhat.com> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Pingfan Liu <piliu@redhat.com> Cc: Klara Modin <klarasmodin@gmail.com> Cc: Michael Kelley <mhklinux@outlook.com> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |