Commit Graph

8 Commits

Author SHA1 Message Date
Linus Walleij
ed11701751
ASoC: rt5682: Convert to use GPIO descriptors
Convert the RT5682 to use GPIO descriptors and drop the
legacy GPIO headers.

We remove the global GPIO number from the platform data,
but it is still possible to create board files using GPIO
descriptor tables, if desired.

Make sure to make sure SDW devices can associate with
an LDO1 EN descriptor too, if they so desire by putting
the lookup into the common code.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230817-descriptors-asoc-rt-v2-4-02fa2ca3e5b0@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-17 15:10:13 +01:00
Oder Chiou
7416f6bc5f
ASoC: rt5682: Add a new property for the DMIC clock driving
The patch adds a new property to set the DMIC clock driving.

Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Link: https://lore.kernel.org/r/20201113055400.11242-1-oder_chiou@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-11-13 14:22:09 +00:00
Oder Chiou
8b15ee0bf8
ASoC: rt5682: Add a property for DMIC delay
The patch adds a property for DMIC delay (ms) to avoid pop noise and
changes the default delay setting.

Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Link: https://lore.kernel.org/r/20200323082547.7898-2-oder_chiou@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-23 18:17:24 +00:00
Oder Chiou
9a74c44a6f
ASoC: rt5682: Add a property for DMIC clock rate
The patch adds a property for DMIC clock rate (hz) and changes the
default to the common optimize DMIC clock rate.

Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Link: https://lore.kernel.org/r/20200323082547.7898-1-oder_chiou@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-23 18:17:23 +00:00
Derek Fang
ebbfabc16d
ASoC: rt5682: Add CCF usage for providing I2S clks
There is a need to use RT5682 as DAI clock master for other codecs
within a platform, which means that the DAI clocks are required to
remain, regardless of whether the RT5682 is actually running
playback/capture.

The RT5682 CCF basic functions are implemented almost by the existing
internal functions and asoc apis. It needs a clk provider (rt5682 mclk)
to generate the bclk and wclk outputs.

The RT5682 CCF supports and restricts as below:
1. Fmt of DAI-AIF1 must be configured to master before using CCF.
2. Only accept a 48MHz clk as the clk provider.
3. Only provide a 48kHz wclk and a set of multiples of wclk as bclk.

There are some temporary limitations in this patch until a better
implementation.

Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/1582033912-6841-1-git-send-email-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-02-18 22:23:24 +00:00
Shuming Fan
e226445802
ASoC: rt5682: improve the sensitivity of push button
The sensitivity could improve by decreasing the HW debounce time
and reduce the delay time of workequeue.
This patch added a device property for HW debounce time control.
We could change this value to tune the sensitivity of push button.

Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20191030085533.14299-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-30 14:13:21 +00:00
Thomas Gleixner
d2912cb15b treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19 17:09:55 +02:00
Bard Liao
0ddce71c21
ASoC: rt5682: add rt5682 codec driver
This is the initial codec driver for rt5682.

Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-18 12:54:38 +01:00