Add wiphy_delayed_work_pending() to check if any delayed work timer is
pending, that can be used to be sure that wiphy_delayed_work_queue()
won't postpone an already pending delayed work.
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Link: https://patch.msgid.link/20240924192805.13859-2-repk@triplefau.lt
[fix return value kernel-doc]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There cannot be brackets in kernel-doc, remove them.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 62c16f219a ("wifi: cfg80211: move DFS related members to links[] in wireless_dev")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, during starting a radar detection, no link id information is
parsed and passed down. In order to support starting radar detection
during Multi Link Operation, it is required to pass link id as well.
Add changes to first parse and then pass link id in the start radar
detection path.
Additionally, update notification APIs to allow drivers/mac80211 to
pass the link ID.
However, everything is handled at link 0 only until all API's are ready to
handle it per link.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://patch.msgid.link/20240906064426.2101315-6-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
A few members related to DFS handling are currently under per wireless
device data structure. However, in order to support DFS with MLO, there is
a need to have them on a per-link manner.
Hence, as a preliminary step, move members cac_started, cac_start_time
and cac_time_ms to be on a per-link basis.
Since currently, link ID is not known at all places, use default value of
0 for now.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://patch.msgid.link/20240906064426.2101315-5-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The prerequisite for MLO support in cfg80211/mac80211 is that all the links
participating in MLO must be from the same wiphy/ieee80211_hw. To meet this
expectation, some drivers may need to group multiple discrete hardware each
acting as a link in MLO under single wiphy.
With this change, supported frequencies and interface combinations of each
individual radio are reported to user space. This allows user space to figure
out the limitations of what combination of channels can be used concurrently.
Even for non-MLO devices, this improves support for devices capable of
running on multiple channels at the same time.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://patch.msgid.link/18a88f9ce82b1c9f7c12f1672430eaf2bb0be295.1720514221.git-series.nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add a regulatory flag to allow VLP AP operation even on
channels otherwise marked NO_IR, which may be possible
in some regulatory domains/countries.
Note that this requires checking also when the beacon is
changed, since that may change the regulatory power type.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240523120945.63792ce19790.Ie2a02750d283b78fbf3c686b10565fb0388889e2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are two functions exported now, with different settings,
refactor to just export a single function that take a struct
with different settings. This will make it easier to add more
parameters.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240523120945.d44c34dadfc2.I59b4403108e0dbf7fc6ae8f7522e1af520cffb1c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This really shouldn't have been in ieee80211.h, since it
doesn't directly represent the spec. Move it to cfg80211
rather than mac80211 since upcoming changes will use it
there.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240523120945.962b16c831cd.I5745962525b1b176c5b90d37b3720fc100eee406@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Use BIT(x) instead of 1<<x, in part because it's mostly
missing spaces anyway, in part because it reads nicer.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240523120945.c21598fbf49c.Ib8f26c5e9f508aee19fdfa1fd4b5995f084c46d4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Annotate 'sub_specs' of 'struct cfg80211_sar_specs', 'channels'
of 'struct cfg80211_sched_scan_request', 'channels' of 'struct
cfg80211_wowlan_nd_match', and 'matches' of 'struct
cfg80211_wowlan_nd_info' with '__counted_by' attribute. Briefly
tested with clang 18.1.1 and CONFIG_UBSAN_BOUNDS running iwlwifi.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://msgid.link/20240517153332.18271-1-dmantipov@yandex.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, during color change, no link id information is passed down.
In order to support color change during Multi Link Operation, it is
required to pass link id as well.
Additionally, update notification APIs to allow drivers/mac80211 to
pass the link ID.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://msgid.link/20240422053412.2024075-2-quic_adisi@quicinc.com
Link: https://msgid.link/20240422053412.2024075-3-quic_adisi@quicinc.com
[squash, actually only pass 0 from mac80211]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Running "scripts/kernel-doc -Wall -Werror -none include/net/cfg80211.h"
produces many warnings of the form "warning: No description found for
return value of <function>", so make sure all of them have a Return:
clause. In some instances also add a Context: clause.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://msgid.link/20240417-cfg80211-kdoc-v1-1-d54cb7143417@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Wireless extensions are already disabled if MLO is enabled,
given that we cannot support MLO there with all the hard-
coded assumptions about BSSID etc.
However, the WiFi7 ecosystem is still stabilizing, and some
devices may need MLO disabled while that happens. In that
case, we might end up with a device that supports wext (but
not MLO) in one kernel, and then breaks wext in the future
(by enabling MLO), which is not desirable.
Add a flag to let such drivers/devices disable wext even if
MLO isn't yet enabled.
Cc: stable@vger.kernel.org
Link: https://msgid.link/20240314110951.b50f1dc4ec21.I656ddd8178eedb49dc5c6c0e70f8ce5807afb54f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If we just want to determine the length of the fragmented
data, we basically need the same logic, and really we want
it to be _literally_ the same logic, so it cannot be out
of sync in any way.
Allow calling cfg80211_defragment_element() without an output
buffer, where it then just returns the required output size.
Also add this to the tests, just to exercise it, using the
pre-calculated length to really do the defragmentation, which
checks that this is sufficient.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://msgid.link/20240228095718.6d6565b9e3f2.Ib441903f4b8644ba04b1c766f90580ee6f54fc66@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Make cfg80211_inform_bss_frame_data() call the existing
cfg80211_inform_bss_data() after parsing the frame in the
appropriate way, so we have less code duplication. This
required introducing a new CFG80211_BSS_FTYPE_S1G_BEACON,
but that can be used by other drivers as well.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240216135047.874aed1eff5f.Ib7d88d126eec50c64763251a78cb432bb5df14df@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Even if that's the same as IEEE80211_MAX_SSID_LEN, we really
should just use IEEE80211_MAX_MESH_ID_LEN for mesh, rather
than having the BUILD_BUG_ON()s.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add to cfg80211_wowlan_wakeup another wakeup reason -
unprot_deauth_disassoc.
To be set to true if the woke up was due to an
unprotected deauth or disassoc frame in MFP.
In that case report WOWLAN_TRIG_UNPROTECTED_DEAUTH_DISASSOC.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240206164849.a3d739850d03.I8f52a21c4f36d1af1f8068bed79e2f9cbf8289ef@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If the hardware supports a disabled channel, it may in
some cases be possible to use monitor mode (without any
transmit) on it when it's otherwise disabled. Add a new
channel flag IEEE80211_CHAN_CAN_MONITOR that makes it
possible for a driver to indicate such a thing.
Make it per channel so drivers could have a choice with
it, perhaps it's only possible on some channels, perhaps
some channels are not supported at all, but still there
and marked disabled.
In _nl80211_parse_chandef() simplify the code and check
only for an unknown channel, _cfg80211_chandef_usable()
will later check for IEEE80211_CHAN_DISABLED anyway.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240206164849.87fad3a21a09.I9116b2fdc2e2c9fd59a9273a64db7fcb41fc0328@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently whenever NL80211_CMD_DEL_STATION command is called without any
MAC address, all stations present on that interface are flushed.
However with MLO there is a need to flush such stations only which are
using at least a particular link from the AP MLD interface.
For example - 2 GHz and 5 GHz are part of an AP MLD.
To this interface, following stations are connected -
1. One non-EHT STA on 2 GHz link.
2. One non-EHT STA on 5 GHz link.
3. One Multi-Link STA having 2 GHz and 5 GHz as active links.
Now if currently, NL80211_CMD_DEL_STATION is issued by the 2 GHz link
without any MAC address, it would flush all station entries. However,
flushing of station entry #2 at least is not desireable since it
is connected to 5 GHz link alone.
Hence, add an option to pass link ID as well in the command so that if link
ID is passed, stations using that passed link ID alone would be flushed
and others will not.
So after this, station entries #1 and #3 alone would be flushed and #2 will
remain as it is.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://msgid.link/20240205162952.1697646-2-quic_adisi@quicinc.com
[clarify documentation]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This was still referring to cfg80211_chandef_primary_freq(),
fix it.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: b82730bf57 ("wifi: cfg80211/mac80211: move puncturing into chandef")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, during channel switch, no link id information is passed down.
In order to support channel switch during Multi Link Operation, it is
required to pass link id as well.
Add changes to pass link id in the channel_switch cfg80211_ops.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://msgid.link/20240130140918.1172387-2-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This utility is used in STA CSA handling. The op_class in the ECSA
Element can be converted into chandef.
Co-developed-by: Money Wang <money.wang@mediatek.com>
Signed-off-by: Michael-CY Lee <michael-cy.lee@mediatek.com>
Link: https://msgid.link/20231222010914.6521-2-michael-cy.lee@mediatek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Aloka originally suggested that puncturing should be part of
the chandef, so that it's treated correctly. At the time, I
disagreed and it ended up not part of the chandef, but I've
now realized that this was wrong. Even for clients, the RX,
and perhaps more importantly, CCA configuration needs to take
puncturing into account.
Move puncturing into the chandef, and adjust all the code
accordingly. Also add a few tests for puncturing in chandef
compatibility checking.
Link: https://lore.kernel.org/linux-wireless/20220214223051.3610-1-quic_alokad@quicinc.com/
Suggested-by: Aloka Dixit <quic_alokad@quicinc.com>
Link: https://msgid.link/20240129194108.307183a5d2e5.I4d7fe2f126b2366c1312010e2900dfb2abffa0f6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Simplify cfg80211_chandef_compatible() a bit by switching
c1 and c2 around so that c1 is always the narrower one
(once they're not identical or narrow/S1G). Then we can
just check the various primary channels and exit with the
wider one (c2), or NULL.
Also refactor the primary 40/80/160 function to not have
all the calculations hard-coded, and use a wrapper around
it to check primary 40/80/160 compatibility.
While at it, add some kunit tests for this functionality.
Also expose the new cfg80211_chandef_primary_freq() to
drivers, mac80211 will use it.
Link: https://msgid.link/20240129194108.be3e6eccaba3.I8399c2ff1435d7378e5837794cb5aa6dd2ee1416@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are some changes coming to wireless-next that will
otherwise cause conflicts, pull wireless in first to be
able to resolve that when applying the individual changes
rather than having to do merge resolution later.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We recently added some validation that we don't try to
connect to an AP that is currently in a channel switch
process, since that might want the channel to be quiet
or we might not be able to connect in time to hear the
switching in a beacon. This was in commit c09c4f3199
("wifi: mac80211: don't connect to an AP while it's in
a CSA process").
However, we promptly got a report that this caused new
connection failures, and it turns out that the AP that
we now cannot connect to is permanently advertising an
extended channel switch announcement, even with quiet.
The AP in question was an Asus RT-AC53, with firmware
3.0.0.4.380_10760-g21a5898.
As a first step, attempt to detect that we're dealing
with such a situation, so mac80211 can use this later.
Reported-by: coldolt <andypalmadi@gmail.com>
Closes: https://lore.kernel.org/linux-wireless/CAJvGw+DQhBk_mHXeu6RTOds5iramMW2FbMB01VbKRA4YbHHDTA@mail.gmail.com/
Fixes: c09c4f3199 ("wifi: mac80211: don't connect to an AP while it's in a CSA process")
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240129131413.246972c8775e.Ibf834d7f52f9951a353b6872383da710a7358338@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This *mostly* reverts commit 1e1b11b6a1 ("nl80211/cfg80211: Specify
band specific min RSSI thresholds with sched scan").
During the review of a new patch [1] it was observed that the
functionality being modified was not actually being used by any
in-tree driver. Further research determined that the functionality was
originally introduced to support a new Android interface, but that
interface was subsequently abandoned. Since the functionality has
apparently never been used, remove it. However, to mantain the
sanctity of the UABI, keep the nl80211.h assignments, but clearly mark
them as obsolete.
Cc: Lin Ma <linma@zju.edu.cn>
Cc: Vamsi Krishna <quic_vamsin@quicinc.com>
Link: https://lore.kernel.org/linux-wireless/20240119151201.8670-1-linma@zju.edu.cn/ [1]
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://msgid.link/20240125-for-next-v1-1-fd79e01c6c09@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add SPP (signaling and payload protected) AMSDU support.
Since userspace has to build the RSNX element, add an extended
feature flag to indicate that this is supported.
In order to avoid downgrade/mismatch attacks, add a flag to the assoc
command on the station side, so that we can be sure that the value of
the flag comes from the same RSNX element that will be validated by
the supplicant against the 4-way-handshake. If we just pulled the
data out of a beacon/probe response, we could theoretically look an
RSNX element from a different frame, with a different value for this
flag, than the supplicant is using to validate in the
4-way-handshake.
Note that this patch is only geared towards software crypto
implementations or hardware ones that can perfectly implement SPP
A-MSDUs, i.e. are able to switch the AAD construction on the fly for
each TX/RX frame.
For more limited hardware implementations, more capability
advertisement would be required, e.g. if the hardware has no way
to switch this on the fly but has only a global configuration that
must apply to all stations.
The driver could of course *reject* mismatches, but the supplicant
must know so it can do things like not negotiating SPP A-MSDUs on
a T-DLS link when connected to an AP that doesn't support it, or
similar.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240102213313.fadac8df7030.I9240aebcba1be49636a73c647ed0af862713fc6f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
UHB AP send supported power type(LPI, SP, VLP)
in beacon and probe response IE and STA should
connect to these AP only if their regulatory support
the AP power type.
Beacon/Probe response are reported to userspace
with reason "STA regulatory not supporting to connect to AP
based on transmitted power type" and it should
not connect to AP.
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231220133549.cbfbef9170a9.I432f78438de18aa9f5c9006be12e41dc34cc47c5@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Due to different relaxation policies it may be needed to re-check
channels after a BSS station interface is disconnected or performed a
channel switch.
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231220133549.1f2f8475bcf1.I1879d259d8d756159c8060f61f4bce172e6d323e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
FCC-594280 D01 Section B.3 allows peer-to-peer and ad hoc devices to
operate on DFS channels while they operate under the control of a
concurrent DFS master. For example, it is possible to have a P2P GO on a
DFS channel as long as BSS connection is active on the same channel.
Allow such operation by adding additional regulatory flags to indicate
DFS concurrent channels and capable devices. Add the required
relaxations in DFS regulatory checks.
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231220133549.bdfb8a9c7c54.I973563562969a27fea8ec5685b96a3a47afe142f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
include/net/cfg80211.h includes a number of kerneldoc entries for struct
members that do not exist, leading to these warnings:
./include/net/cfg80211.h:3192: warning: Excess struct member 'band_pref' description in 'cfg80211_bss_selection'
./include/net/cfg80211.h:3192: warning: Excess struct member 'adjust' description in 'cfg80211_bss_selection'
./include/net/cfg80211.h:6181: warning: Excess struct member 'bssid' description in 'wireless_dev'
./include/net/cfg80211.h:6181: warning: Excess struct member 'beacon_interval' description in 'wireless_dev'
./include/net/cfg80211.h:7299: warning: Excess struct member 'bss' description in 'cfg80211_rx_assoc_resp_data'
Remove and/or repair each entry to address the warnings and ensure a proper
docs build for the affected structures.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://msgid.link/87plz1g2sc.fsf@meer.lwn.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since SSIDs comparison is commonly used across many drivers, introduce
generic 'cfg80211_ssid_eq()' to replace driver-private implementations.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://msgid.link/20231215123859.196350-1-dmantipov@yandex.ru
[fix kernel-doc return docs]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The second features pull request for v6.8. A bigger one this time with
changes both to stack and drivers. We have a new Wifi band RFI (WBRF)
mitigation feature for which we pulled an immutable branch shared with
other subsystems. And, as always, other new features and bug fixes all
over.
Major changes:
cfg80211/mac80211
* AMD ACPI based Wifi band RFI (WBRF) mitigation feature
* Basic Service Set (BSS) usage reporting
* TID to link mapping support
* mac80211 hardware flag to disallow puncturing
iwlwifi
* new debugfs file fw_dbg_clear
mt76
* NVMEM EEPROM improvements
* mt7996 Extremely High Throughpu (EHT) improvements
* mt7996 Wireless Ethernet Dispatcher (WED) support
* mt7996 36-bit DMA support
ath12k
* support one MSI vector
* WCN7850: support AP mode
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmWAdRERHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZu0RAf+JtHgfjmUMFb54xcncLgj8ZAN82E0ThE0
bPewQDhot0QTri4s7i5Kn8PCWjk+eKEmiIK+eARM+JDyZMTlCpXs2Y92cDAGQ8KG
+LbIMRQkwOUg0HmtX3NysUG3mGAx4QTcIX/y3+GmtMZpKXMFuNy6ODuFvuWFNJrF
3XTq1qFQNnA0XqUDKHW9uareeCiOMVOsqcxNW2FAi2gqRUfQpKnU1Ukv5iOjkqE9
i53GHzeAG2WI4/YjXaTEZvibkM3jqrPcquHlul3fVuq05qkKOEuiy2UalDjgDCYp
u91vbmMpcOjhlf9GIiu2BF6K/muEUCCIjlh5oxob0k9NiKhnPUZLng==
=6Y8M
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2023-12-18' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.8
The second features pull request for v6.8. A bigger one this time with
changes both to stack and drivers. We have a new Wifi band RFI (WBRF)
mitigation feature for which we pulled an immutable branch shared with
other subsystems. And, as always, other new features and bug fixes all
over.
Major changes:
cfg80211/mac80211
* AMD ACPI based Wifi band RFI (WBRF) mitigation feature
* Basic Service Set (BSS) usage reporting
* TID to link mapping support
* mac80211 hardware flag to disallow puncturing
iwlwifi
* new debugfs file fw_dbg_clear
mt76
* NVMEM EEPROM improvements
* mt7996 Extremely High Throughpu (EHT) improvements
* mt7996 Wireless Ethernet Dispatcher (WED) support
* mt7996 36-bit DMA support
ath12k
* support one MSI vector
* WCN7850: support AP mode
* tag 'wireless-next-2023-12-18' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (207 commits)
wifi: mt76: mt7996: Use DECLARE_FLEX_ARRAY() and fix -Warray-bounds warnings
wifi: ath11k: workaround too long expansion sparse warnings
Revert "wifi: ath12k: use ATH12K_PCI_IRQ_DP_OFFSET for DP IRQ"
wifi: rt2x00: remove useless code in rt2x00queue_create_tx_descriptor()
wifi: rtw89: only reset BB/RF for existing WiFi 6 chips while starting up
wifi: rtw89: add DBCC H2C to notify firmware the status
wifi: rtw89: mac: add suffix _ax to MAC functions
wifi: rtw89: mac: add flags to check if CMAC and DMAC are enabled
wifi: rtw89: 8922a: add power on/off functions
wifi: rtw89: add XTAL SI for WiFi 7 chips
wifi: rtw89: phy: print out RFK log with formatted string
wifi: rtw89: parse and print out RFK log from C2H events
wifi: rtw89: add C2H event handlers of RFK log and report
wifi: rtw89: load RFK log format string from firmware file
wifi: rtw89: fw: add version field to BB MCU firmware element
wifi: rtw89: fw: load TX power track tables from fw_element
wifi: mwifiex: configure BSSID consistently when starting AP
wifi: mwifiex: add extra delay for firmware ready
wifi: mac80211: sta_info.c: fix sentence grammar
wifi: mac80211: rx.c: fix sentence grammar
...
====================
Link: https://lore.kernel.org/r/20231218163900.C031DC433C9@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Correct spelling and run-on sentences.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: linux-wireless@vger.kernel.org
Cc: Kalle Valo <kvalo@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Link: https://msgid.link/20231213043558.10409-1-rdunlap@infradead.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support for setting the TID to link mapping for a non-AP MLD
station.
This is useful in cases user space needs to restrict the possible
set of active links, e.g., since it got a BSS Transition Management
request forcing to use only a subset of the valid links etc.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231211085121.da4d56a5f3ff.Iacf88e943326bf9c169c49b728c4a3445fdedc97@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Sometimes there may be reasons for which a BSS that's
actually found in scan cannot be used to connect to,
for example a nonprimary link of an NSTR mobile AP MLD
cannot be used for normal direct connections to it.
Not indicating these to userspace as we do now of course
avoids being able to connect to them, but it's better if
they're shown to userspace and it can make an appropriate
decision, without e.g. doing an additional ML probe.
Thus add an indication of what a BSS can be used for,
currently "normal" and "MLD link", including a reason
bitmap for it being not usable.
The latter can be extended later for certain BSSes if there
are other reasons they cannot be used.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231211085121.0464f25e0b1d.I9f70ca9f1440565ad9a5207d0f4d00a20cca67e7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The newly added WBRF feature needs this interface for channel
width calculation.
Signed-off-by: Evan Quan <quanliangl@hotmail.com>
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://msgid.link/20231211100630.2170152-4-Jun.Ma2@amd.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add wrappers for debugfs files that should be called with
the wiphy mutex held, while the file is also to be removed
under the wiphy mutex. This could otherwise deadlock when
a file is trying to acquire the wiphy mutex while the code
removing it holds the mutex but waits for the removal.
This actually works by pushing the execution of the read
or write handler to a wiphy work that can be cancelled
using the debugfs cancellation API.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
To extend the support of TSF accounting in scan results for MLO
connections, allow to indicate in the scan request the link ID
corresponding to the BSS whose TSF should be used for the TSF
accounting.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231113112844.d4490bcdefb1.I8fcd158b810adddef4963727e9153096416b30ce@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In 4way handshake offload, cfg80211_port_authorized enables driver
to indicate successful 4way handshake to cfg80211 layer. Currently
this path of port authorization is restricted to interface type
NL80211_IFTYPE_STATION and NL80211_IFTYPE_P2P_CLIENT. This patch
extends the support for NL80211_IFTYPE_AP and NL80211_IFTYPE_P2P_GO
interfaces to authorize peer STA/P2P_CLIENT, whenever authentication
is offloaded on the AP/P2P_GO interface.
Signed-off-by: Vinayak Yadawad <vinayak.yadawad@broadcom.com>
Link: https://lore.kernel.org/r/dee3b0a2b4f617e932c90bff4504a89389273632.1695721435.git.vinayak.yadawad@broadcom.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
make htmldocs warns:
Documentation/driver-api/80211/cfg80211:48: ./include/net/cfg80211.h:7290: WARNING: Duplicate C declaration, also defined at cfg80211:7251.
Declaration is '.. c:function:: void cfg80211_rx_assoc_resp (struct net_device *dev, struct cfg80211_rx_assoc_resp *data)'.
This is because there's a function named cfg80211_rx_assoc_resp() and a struct
named cfg80211_rx_assoc_resp, see previous patch for more info.
To workaround this rename the struct to cfg80211_rx_assoc_resp_data. The
parameter for the function is named 'data' anyway so the naming here is
consistent.
Compile tested only.
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231012114229.2931808-3-kvalo@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Correct spelling of several words.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231001191633.19090-1-rdunlap@infradead.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
