This patch adds a warn on if is_master() and dlm_is_removed() checks on
invalid nodeid states that are probably not what the caller wants to do
here. The is_master() function checking on r->res_nodeid is invalid when
it is set to -1, whereas the dlm_is_removed() has a different meaning
as "nodeid member" and also 0 is invalid.
We run into these cases and this patch changes those cases as we never
will run into them. There should be no functional changes as the
condition should return the same result. However this patch signals now
on caller level that there might be an "extra" case to handle here.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
The old terminology of "toss" and "keep" is no longer an
accurate description of the rsb states and lists, so change
the names to "inactive" and "active". The old names had
also been copied into the scanning code, which is changed
back to use the "scan" name.
- "active" rsb structs have lkb's attached, and are ref counted.
- "inactive" rsb structs have no lkb's attached, are not ref counted.
- "scan" list is for rsb's that can be freed after a timeout period.
- "slow" lists are for infrequent iterations through active or
inactive rsb structs.
- inactive rsb structs that are directory records will not be put
on the scan list, since they are not freed based on timeouts.
- inactive rsb structs that are not directory records will be
put on the scan list to be freed, since they are not longer needed.
Signed-off-by: David Teigland <teigland@redhat.com>
According to kdoc idr is deprecated and xarrays should be used nowadays.
This patch is moving the recover idr implementation to xarray
datastructure.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
The conversion to rhashtable introduced a hash table lock per lockspace,
in place of per bucket locks. To make this more scalable, switch to
using a rwlock for hash table access. The common case fast path uses
it as a read lock.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Currently the scand kthread acts like a garbage collection for expired
rsbs on toss list, to clean them up after a certain timeout. It triggers
every couple of seconds and iterates over the toss list while holding
ls_rsbtbl_lock for the whole hash bucket iteration.
To reduce the amount of time holding ls_rsbtbl_lock, we now handle the
disposal of expired rsbs using a per-lockspace timer that expires for the
earliest tossed rsb on the lockspace toss queue. This toss queue is
ordered according to the rsb res_toss_time with the earliest tossed rsb
as the first entry. The toss timer will only trylock() necessary locks,
since it is low priority garbage collection, and will rearm the timer
if trylock() fails. If the timer function does not find any expired
rsb's, it rearms the timer with the next earliest expired rsb.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
In the past we had problems when an rsb had a reference counter greater
than one while in the toss state. An rsb in the toss state is not
actively used for locking, and should not have any other references
apart from the single ref keeping it on the rsb hash. Shift to freeing
rsb's directly rather than using kref_put to free them, since the ref
counting is not meant to be used in this state. Add warnings if ref
counting is seen while an rsb is in the toss state.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Replace our own hash table with the more advanced rhashtable
for keeping rsb structs.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
To prepare for using rhashtable, add two rsb lists for iterating
through rsb's in two uncommon cases where this is necesssary:
- when dumping rsb state from debugfs, now using seq_list.
- when looking at all rsb's during recovery.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
There are several places where lock processing can perform two hash table
lookups, first in the "keep" list, and if not found, in the "toss" list.
This patch introduces a new rsb state flag "RSB_TOSS" to represent the
difference between the state of being on keep vs toss list, so that the
two lists can be combined. This avoids cases of two lookups.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Prepare to replace our own hash table with rhashtable by replacing
the per-bucket locks in our own hash table with a single lock.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Use spin_lock_bh for all spinlocks involved in message processing,
in preparation for softirq message processing. DLM lock requests
from user space involve dlm processing in user context, in addition
to the standard kernel context, necessitating bh variants.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Move the rsb root_list from the lockspace to a stack variable since
it is now only used by the ls_recover() function.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Move dlm_create_root_list() and dlm_release_root_list() to
recover.c and declare them static because they are only used
there.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Replace GFP_NOFS with GFP_ATOMIC. Also stop using idr_preload which
uses a non-bh spin_lock. This is further preparation for softirq
message processing.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
The dlm receive buffer should be never manipulated as DLM is the last
instance of parsing layer. This patch constify the whole receive buffer
so we are sure it never gets manipulated when it's being parsed.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch removes a read of the ls->ls_recover_seq uint64_t number in
_create_rcom(). If the ls->ls_recover_seq is readed the ls_recover_lock
need to held. However this number was always readed before when any rcom
message is received and it's not necessary to read it again from a per
lockspace variable to use it for the replying message. This patch will
pass the sequence number as parameter so another read of ls->ls_recover_seq
and holding the ls->ls_recover_lock is not required.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch will move the lkb_flags value to the recently introduced
lkb_iflags value. For lkb_iflags we use atomic bit operations because
some flags like DLM_IFL_CB_PENDING are used while non rsb lock is held
to avoid issues with other flag manipulations which might run at the
same time we switch to atomic bit operations. Snapshot the bit values to
an uint32_t value is only used for debugging/logging use cases and don't
need to be 100% correct.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
To move the list iterator variable into the list_for_each_entry_*()
macro in the future it should be avoided to use the list iterator
variable after the loop body.
To *never* use the list iterator variable after the loop it was
concluded to use a separate iterator variable instead of a
found boolean [1].
This removes the need to use a found variable and simply checking if
the variable was set, can determine if the break/goto was hit.
Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ [1]
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch changes to use __le types directly in the dlm rcom
structure which is casted at the right dlm message buffer positions.
The main goal what is reached here is to remove sparse warnings
regarding to host to little byte order conversion or vice versa. Leaving
those sparse issues ignored and always do it in out/in functionality
tends to leave it unknown in which byte order the variable is being
handled.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Based on 1 normalized pattern(s):
this copyrighted material is made available to anyone wishing to use
modify copy or redistribute it subject to the terms and conditions
of the gnu general public license v 2
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 45 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190528170027.342746075@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If a node sends a DLM_RCOM_STATUS command and an error occurs on the
receiving side, the DLM_RCOM_STATUS_REPLY response may not be returned.
We retransmitted the DLM_RCOM_STATUS command so that we do not wait for
an infinite response.
Signed-off-by: Tadashi Miyauchi <miyauchi@toshiba-tops.co.jp>
Signed-off-by: Tsutomu Owa <tsutomu.owa@toshiba.co.jp>
Signed-off-by: David Teigland <teigland@redhat.com>
The log messages relating to the progress of recovery
are minimal and very often useful. Change these to
the KERN_INFO level so they are always available.
Signed-off-by: David Teigland <teigland@redhat.com>
Convert to the much saner new idr interface. Error return values from
recover_idr_add() mix -1 and -errno. The conversion doesn't change
that but it looks iffy.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
idr_destroy() can destroy idr by itself and idr_remove_all() is being
deprecated.
The conversion isn't completely trivial for recover_idr_clear() as it's
the only place in kernel which makes legitimate use of idr_remove_all()
w/o idr_destroy(). Replace it with idr_remove() call inside
idr_for_each_entry() loop. It goes on top so that it matches the
operation order in recover_idr_del().
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Christine Caulfield <ccaulfie@redhat.com>
Cc: David Teigland <teigland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Convert recover_idr_clear() to use idr_for_each_entry() instead of
idr_for_each(). It's somewhat less efficient this way but it shouldn't
matter in an error path. This is to help with deprecation of
idr_remove_all().
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Christine Caulfield <ccaulfie@redhat.com>
Cc: David Teigland <teigland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When a node is removed that held a PW/EX lock, the
existing master node should invalidate the lvb on the
resource due to the purged lock.
Previously, the existing master node was invalidating
the lvb if it found only NL/CR locks on the resource
during recovery for the removed node. This could lead
to cases where it invalidated the lvb and shouldn't
have, or cases where it should have invalidated and
didn't.
When recovery selects a *new* master node for a
resource, and that new master finds only NL/CR locks
on the resource after lock recovery, it should
invalidate the lvb. This case was handled correctly
(but was incorrectly applied to the existing master
case also.)
When a process exits while holding a PW/EX lock,
the lvb on the resource should be invalidated.
This was not happening.
The lvb contents and VALNOTVALID flag should be
recovered before granting locks in recovery so that
the recovered lvb state is provided in the callback.
The lvb was being recovered after the lock was granted.
Signed-off-by: David Teigland <teigland@redhat.com>
The process of rebuilding locks on a new master during
recovery could re-order the locks on the convert queue,
creating an "in place" conversion deadlock that would
not be resolved. Fix this by not considering queue
order when granting conversions after recovery.
Signed-off-by: David Teigland <teigland@redhat.com>
When a large number of resources are being recovered,
a linear search of the recover_list takes a long time.
Use an idr in place of a list.
Signed-off-by: David Teigland <teigland@redhat.com>
Remove the dir hash table (dirtbl), and use
the rsb hash table (rsbtbl) as the resource
directory. It has always been an unnecessary
duplication of information.
This improves efficiency by using a single rsbtbl
lookup in many cases where both rsbtbl and dirtbl
lookups were needed previously.
This eliminates the need to handle cases of rsbtbl
and dirtbl being out of sync.
In many cases there will be memory savings because
the dir hash table no longer exists.
Signed-off-by: David Teigland <teigland@redhat.com>
The "nodir" mode (statically assign master nodes instead
of using the resource directory) has always been highly
experimental, and never seriously used. This commit
fixes a number of problems, making nodir much more usable.
- Major change to recovery: recover all locks and restart
all in-progress operations after recovery. In some
cases it's not possible to know which in-progess locks
to recover, so recover all. (Most require recovery
in nodir mode anyway since rehashing changes most
master nodes.)
- Change the way nodir mode is enabled, from a command
line mount arg passed through gfs2, into a sysfs
file managed by dlm_controld, consistent with the
other config settings.
- Allow recovering MSTCPY locks on an rsb that has not
yet been turned into a master copy.
- Ignore RCOM_LOCK and RCOM_LOCK_REPLY recovery messages
from a previous, aborted recovery cycle. Base this
on the local recovery status not being in the state
where any nodes should be sending LOCK messages for the
current recovery cycle.
- Hold rsb lock around dlm_purge_mstcpy_locks() because it
may run concurrently with dlm_recover_master_copy().
- Maintain highbast on process-copy lkb's (in addition to
the master as is usual), because the lkb can switch
back and forth between being a master and being a
process copy as the master node changes in recovery.
- When recovering MSTCPY locks, flag rsb's that have
non-empty convert or waiting queues for granting
at the end of recovery. (Rename flag from LOCKS_PURGED
to RECOVER_GRANT and similar for the recovery function,
because it's not only resources with purged locks
that need grant a grant attempt.)
- Replace a couple of unnecessary assertion panics with
error messages.
Signed-off-by: David Teigland <teigland@redhat.com>
Slot numbers are assigned to nodes when they join the lockspace.
The slot number chosen is the minimum unused value starting at 1.
Once a node is assigned a slot, that slot number will not change
while the node remains a lockspace member. If the node leaves
and rejoins it can be assigned a new slot number.
A new generation number is also added to a lockspace. It is
set and incremented during each recovery along with the slot
collection/assignment.
The slot numbers will be passed to gfs2 which will use them as
journal id's.
Signed-off-by: David Teigland <teigland@redhat.com>
Put all the calls to recovery barriers in the same function
to clarify where they each happen. Should not change any behavior.
Also modify some recovery debug lines to make them consistent.
Signed-off-by: David Teigland <teigland@redhat.com>
Change the linked lists to rb_tree's in the rsb
hash table to speed up searches. Slow rsb searches
were having a large impact on gfs2 performance due
to the large number of dlm locks gfs2 uses.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
The rwlock is almost always used in write mode, so there's no reason
to not use a spinlock instead.
Signed-off-by: David Teigland <teigland@redhat.com>
To prevent the master of an rsb from changing rapidly, an unused rsb is kept
on the "toss list" for a period of time to be reused. The toss list was
being cleared completely for each recovery, which is unnecessary. Much of
the benefit of the toss list can be maintained if nodes keep rsb's in their
toss list that they are the master of. These rsb's need to be included
when the resource directory is rebuilt during recovery.
Signed-off-by: David Teigland <teigland@redhat.com>
The dlm functions in memory.c should use the dlm_ prefix. Also, use
kzalloc/kfree directly for dlm_direntry's, removing the wrapper functions.
Signed-off-by: David Teigland <teigland@redhat.com>
If master recovery happens on an rsb in one recovery sequence, then that
sequence is aborted before lock recovery happens, then in the next
sequence, we rely on the previous master recovery (which may now be
invalid due to another node ignoring a lookup result) and go on do to the
lock recovery where we get stuck due to an invalid master value.
recovery cycle begins: master of rsb X has left
nodes A and B send node C an rcom lookup for X to find the new master
C gets lookup from B first, sets B as new master, and sends reply back to B
C gets lookup from A next, and sends reply back to A saying B is master
A gets lookup reply from C and sets B as the new master in the rsb
recovery cycle on A, B and C is aborted to start a new recovery
B gets lookup reply from C and ignores it since there's a new recovery
recovery cycle begins: some other node has joined
B doesn't think it's the master of X so it doesn't rebuild it in the directory
C looks up the master of X, no one is master, so it becomes new master
B looks up the master of X, finds it's C
A believes that B is the master of X, so it sends its lock to B
B sends an error back to A
A resends
this repeats forever, the incorrect master value on A is never corrected
The fix is to do master recovery on an rsb that still has the NEW_MASTER
flag set from an earlier recovery sequence, and therefore didn't complete
lock recovery.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Add a "ci_" prefix to the fields in the dlm_config_info struct so that we
can use macros to add configfs functions to access them (in a later
patch). No functional changes in this patch, just naming changes.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Red Hat BZ 213684
If a node sends an lkb to the new master (RCOM_LOCK message) during
recovery and recovery is then aborted on both nodes before it gets a
reply, the res_recover_locks_count needs to be reset to 0 so that when the
subsequent recovery comes along and sends the lkb to the new master again
the assertion doesn't trigger that checks that counter is zero.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
When there are no locks on a resource, the recover_locks() function fails
to clear the NEW_MASTER flag by going directly to out, missing the line
that clears the flag.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Introduce new function dlm_dump_rsb() to call within assertions instead of
dlm_print_rsb(). The new function dumps info about all locks on the rsb
in addition to rsb details.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
If a node becomes the new master of an rsb during recovery, the
LOCKS_PURGED flag needs to be set on it so that any waiting/converting
locks will try to be granted.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This is the core of the distributed lock manager which is required
to use GFS2 as a cluster filesystem. It is also used by CLVM and
can be used as a standalone lock manager independantly of either
of these two projects.
It implements VAX-style locking modes.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steve Whitehouse <swhiteho@redhat.com>
