Fixes a single, long-standing issue with kick pass-through vdpa.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmayY60PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRphg0IAJUlLOlK8z1j1NIu2GtMbS2+MtPg5ZTm8+UX
4okBqPg20IJoB5mRYpAwzjAoqrDsITuJJj6cG7HyT6M06C48AhpIpgbnKjOhHPdO
BrkJvBRKM1xRUAa1CY6tVw93u0lUhBc71xgGZxhqeWDUNf0g1AhZT1ZULwo99OdT
S5VSRANov3wO06Ds3Y7IfomIxvb/bsPsxbKxt1+L2qyzr2kpJnIsMKkgq9+SNLsO
J8B/FhSsSxHJQZEvdGC+LIiuB2senbOjOUiocn8kgBtEfwWKPv30D/+H8cRsUezG
RGNWy3bQ5OhlIgLDhThr5OYe6i2GJxH79xD+BXE+UKAFVGK+BEo=
=fd3h
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio fix from Michael Tsirkin:
"Fix a single, long-standing issue with kick pass-through vdpa"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost-vdpa: switch to use vmf_insert_pfn() in the fault handler
remap_pfn_page() should not be called in the fault handler as it may
change the vma->flags which may trigger lockdep warning since the vma
write lock is not held. Actually there's no need to modify the
vma->flags as it has been set in the mmap(). So this patch switches to
use vmf_insert_pfn() instead.
Reported-by: Dragos Tatulea <dtatulea@nvidia.com>
Tested-by: Dragos Tatulea <dtatulea@nvidia.com>
Fixes: ddd89d0a05 ("vhost_vdpa: support doorbell mapping via mmap")
Cc: stable@vger.kernel.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20240701033159.18133-1-jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Replace iommu_domain_alloc() with iommu_paging_domain_alloc().
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240610085555.88197-5-baolu.lu@linux.intel.com
Signed-off-by: Will Deacon <will@kernel.org>
ida_alloc() and ida_free() should be preferred to the deprecated
ida_simple_get() and ida_simple_remove().
Note that the upper limit of ida_simple_get() is exclusive, but the one of
ida_alloc_max() is inclusive. So a -1 has been added when needed.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Simon Horman <horms@kernel.org>
Message-Id: <67c2edf49788c27d5f7a49fc701520b9fcf739b5.1713088999.git.christophe.jaillet@wanadoo.fr>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
This commit introduces a new interface get_vq_size to
vDPA config ops, this new interface intends to report
the size of a specific virtqueue
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Message-Id: <20240202163905.8834-3-lingshan.zhu@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If a vdpa device is not in state DRIVER_OK, then there is no driver state
to preserve, so no need to call the suspend and resume driver ops.
Suggested-by: Eugenio Perez Martin <eperezma@redhat.com>"
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Message-Id: <1707834358-165470-1-git-send-email-steven.sistare@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
vdpa/mlx5: support for resumable vqs
virtio_scsi: mq_poll support
3virtio_pmem: support SHMEM_REGION
virtio_balloon: stay awake while adjusting balloon
virtio: support for no-reset virtio PCI PM
Fixes, cleanups.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmWmgP8PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpcfgH/0RD2S+NFY0ZEJz8BuI6GjykzYnyRW9iyxcw
epTLjPUcoEBttlw8TA+3PiPoNIJGfuU8Q4iKXJ8Jzql081tP9G1UxTIbj0v3Hx+q
0L2DUXfdAMYMLo5WQVl/PADV/10xLgExEh9jMqpU3IJIxVaLE/knD9ghRCDvDbs/
fOo3sSUGaNsSHYZs5bH73Q7cRKKmTLO+MzvHBbavFfz2fQ1b3vwecmJuQtAtK0JC
6JxH6Y38VfOl8jA6IHeEpGIHeF661HABkDDUh4UVEGOeyBl4E6ZcG4fjWSMinZ08
U3TbQLYOq10i8ki2LJKgoZHRv1HkxbM1Ogn0bsIh1hish8dPORM=
=RWjR
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
- vdpa/mlx5: support for resumable vqs
- virtio_scsi: mq_poll support
- 3virtio_pmem: support SHMEM_REGION
- virtio_balloon: stay awake while adjusting balloon
- virtio: support for no-reset virtio PCI PM
- Fixes, cleanups
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vdpa/mlx5: Add mkey leak detection
vdpa/mlx5: Introduce reference counting to mrs
vdpa/mlx5: Use vq suspend/resume during .set_map
vdpa/mlx5: Mark vq state for modification in hw vq
vdpa/mlx5: Mark vq addrs for modification in hw vq
vdpa/mlx5: Introduce per vq and device resume
vdpa/mlx5: Allow modifying multiple vq fields in one modify command
vdpa/mlx5: Expose resumable vq capability
vdpa: Block vq property changes in DRIVER_OK
vdpa: Track device suspended state
scsi: virtio_scsi: Add mq_poll support
virtio_pmem: support feature SHMEM_REGION
virtio_balloon: stay awake while adjusting balloon
vdpa: Remove usage of the deprecated ida_simple_xx() API
virtio: Add support for no-reset virtio PCI PM
virtio_net: fix missing dma unmap for resize
vhost-vdpa: account iommu allocations
vdpa: Fix an error handling path in eni_vdpa_probe()
The virtio standard doesn't allow for virtqueue address and state
changes when the device is in DRIVER_OK. Return an error in such cases
unless the device is suspended.
The suspended device exception is needed because some devices support
virtqueue changes when the device is suspended.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Suggested-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20231225134210.151540-3-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Set vdpa device suspended state on successful suspend. Clear it on
successful resume and reset.
The state will be locked by the vhost_vdpa mutex. The mutex is taken
during suspend, resume and reset in vhost_vdpa_unlocked_ioctl. The
exception is vhost_vdpa_open which does a device reset but that should
be safe because it can only happen before the other ops.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Suggested-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20231225134210.151540-2-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZZUxRQAKCRCRxhvAZXjc
ov/QAQDzvge3oQ9MEymmOiyzzcF+HhAXBr+9oEsYJjFc1p0TsgEA61gXjZo7F1jY
KBqd6znOZCR+Waj0kIVJRAo/ISRBqQc=
=0bRl
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.8.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"This contains the usual miscellaneous features, cleanups, and fixes
for vfs and individual fses.
Features:
- Add Jan Kara as VFS reviewer
- Show correct device and inode numbers in proc/<pid>/maps for vma
files on stacked filesystems. This is now easily doable thanks to
the backing file work from the last cycles. This comes with
selftests
Cleanups:
- Remove a redundant might_sleep() from wait_on_inode()
- Initialize pointer with NULL, not 0
- Clarify comment on access_override_creds()
- Rework and simplify eventfd_signal() and eventfd_signal_mask()
helpers
- Process aio completions in batches to avoid needless wakeups
- Completely decouple struct mnt_idmap from namespaces. We now only
keep the actual idmapping around and don't stash references to
namespaces
- Reformat maintainer entries to indicate that a given subsystem
belongs to fs/
- Simplify fput() for files that were never opened
- Get rid of various pointless file helpers
- Rename various file helpers
- Rename struct file members after SLAB_TYPESAFE_BY_RCU switch from
last cycle
- Make relatime_need_update() return bool
- Use GFP_KERNEL instead of GFP_USER when allocating superblocks
- Replace deprecated ida_simple_*() calls with their current ida_*()
counterparts
Fixes:
- Fix comments on user namespace id mapping helpers. They aren't
kernel doc comments so they shouldn't be using /**
- s/Retuns/Returns/g in various places
- Add missing parameter documentation on can_move_mount_beneath()
- Rename i_mapping->private_data to i_mapping->i_private_data
- Fix a false-positive lockdep warning in pipe_write() for watch
queues
- Improve __fget_files_rcu() code generation to improve performance
- Only notify writer that pipe resizing has finished after setting
pipe->max_usage otherwise writers are never notified that the pipe
has been resized and hang
- Fix some kernel docs in hfsplus
- s/passs/pass/g in various places
- Fix kernel docs in ntfs
- Fix kcalloc() arguments order reported by gcc 14
- Fix uninitialized value in reiserfs"
* tag 'vfs-6.8.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (36 commits)
reiserfs: fix uninit-value in comp_keys
watch_queue: fix kcalloc() arguments order
ntfs: dir.c: fix kernel-doc function parameter warnings
fs: fix doc comment typo fs tree wide
selftests/overlayfs: verify device and inode numbers in /proc/pid/maps
fs/proc: show correct device and inode numbers in /proc/pid/maps
eventfd: Remove usage of the deprecated ida_simple_xx() API
fs: super: use GFP_KERNEL instead of GFP_USER for super block allocation
fs/hfsplus: wrapper.c: fix kernel-doc warnings
fs: add Jan Kara as reviewer
fs/inode: Make relatime_need_update return bool
pipe: wakeup wr_wait after setting max_usage
file: remove __receive_fd()
file: stop exposing receive_fd_user()
fs: replace f_rcuhead with f_task_work
file: remove pointless wrapper
file: s/close_fd_get_file()/file_close_fd()/g
Improve __fget_files_rcu() code generation (and thus __fget_light())
file: massage cleanup of files that failed to open
fs/pipe: Fix lockdep false-positive in watchqueue pipe_write()
...
iommu allocations should be accounted in order to allow admins to
monitor and limit the amount of iommu memory.
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20231226182827.294158-1-pasha.tatashin@soleen.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Ever since the eventfd type was introduced back in 2007 in commit
e1ad7468c7 ("signal/timer/event: eventfd core") the eventfd_signal()
function only ever passed 1 as a value for @n. There's no point in
keeping that additional argument.
Link: https://lore.kernel.org/r/20231122-vfs-eventfd-signal-v2-2-bd549b14ce0c@kernel.org
Acked-by: Xu Yilun <yilun.xu@intel.com>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com> # ocxl
Acked-by: Eric Farman <farman@linux.ibm.com> # s390
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The put_device() calls vhost_vdpa_release_dev() which calls
ida_simple_remove() and frees "v". So this call to
ida_simple_remove() is a use after free and a double free.
Fixes: ebe6a354fa ("vhost-vdpa: Call ida_simple_remove() when failed")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Message-Id: <cf53cb61-0699-4e36-a980-94fd4268ff00@moroto.mountain>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Using .compat_reset op from the previous patch, the buggy .reset
behaviour can be kept as-is on older userspace apps, which don't ack the
IOTLB_PERSIST backend feature. As this compatibility quirk is limited to
those drivers that used to be buggy in the past, it won't affect change
the behaviour or affect ABI on the setups with API compliant driver.
The separation of .compat_reset from the regular .reset allows
vhost-vdpa able to know which driver had broken behaviour before, so it
can apply the corresponding compatibility quirk to the individual driver
whenever needed. Compared to overloading the existing .reset with
flags, .compat_reset won't cause any extra burden to the implementation
of every compliant driver.
[mst: squashed in two fixup commits]
Message-Id: <1697880319-4937-6-git-send-email-si-wei.liu@oracle.com>
Message-Id: <1698102863-21122-1-git-send-email-si-wei.liu@oracle.com>
Reported-by: Dragos Tatulea <dtatulea@nvidia.com>
Tested-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <1698275594-19204-1-git-send-email-si-wei.liu@oracle.com>
Reported-by: Lei Yang <leiyang@redhat.com>
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Userspace needs this feature flag to distinguish if vhost-vdpa iotlb in
the kernel can be trusted to persist IOTLB mapping across vDPA reset.
Without it, userspace has no way to tell apart if it's running on an
older kernel, which could silently drop all iotlb mapping across vDPA
reset, especially with broken parent driver implementation for the
.reset driver op. The broken driver may incorrectly drop all mappings of
its own as part of .reset, which inadvertently ends up with corrupted
mapping state between vhost-vdpa userspace and the kernel. As a
workaround, to make the mapping behaviour predictable across reset,
userspace has to pro-actively remove all mappings before vDPA reset, and
then restore all the mappings afterwards. This workaround is done
unconditionally on top of all parent drivers today, due to the parent
driver implementation issue and no means to differentiate. This
workaround had been utilized in QEMU since day one when the
corresponding vhost-vdpa userspace backend came to the world.
There are 3 cases that backend may claim this feature bit on for:
- parent device that has to work with platform IOMMU
- parent device with on-chip IOMMU that has the expected
.reset_map support in driver
- parent device with vendor specific IOMMU implementation with
persistent IOTLB mapping already that has to specifically
declare this backend feature
The reason why .reset_map is being one of the pre-condition for
persistent iotlb is because without it, vhost-vdpa can't switch back
iotlb to the initial state later on, especially for the on-chip IOMMU
case which starts with identity mapping at device creation. virtio-vdpa
requires on-chip IOMMU to perform 1:1 passthrough translation from PA to
IOVA as-is to begin with, and .reset_map is the only means to turn back
iotlb to the identity mapping mode after vhost-vdpa is gone.
The difference in behavior did not matter as QEMU unmaps all the memory
unregistering the memory listener at vhost_vdpa_dev_start( started =
false), but the backend acknowledging this feature flag allows QEMU to
make sure it is safe to skip this unmap & map in the case of vhost stop
& start cycle.
In that sense, this feature flag is actually a signal for userspace to
know that the driver bug has been solved. Not offering it indicates that
userspace cannot trust the kernel will retain the maps.
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <1697880319-4937-4-git-send-email-si-wei.liu@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Devices with on-chip IOMMU or vendor specific IOTLB implementation may
need to restore iotlb mapping to the initial or default state using the
.reset_map op, as it's desirable for some parent devices to not work
with DMA ops and maintain a simple IOMMU model with .reset_map. In
particular, device reset should not cause mapping to go away on such
IOTLB model, so persistent mapping is implied across reset. Before the
userspace process using vhost-vdpa is gone, give it a chance to reset
iotlb back to the initial state in vhost_vdpa_cleanup().
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <1697880319-4937-3-git-send-email-si-wei.liu@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
With _F_DESC_ASID backend feature, the device can now support the
VHOST_VDPA_GET_VRING_DESC_GROUP ioctl, and it may expose the descriptor
table (including avail and used ring) in a different group than the
buffers it contains. This new uAPI will fetch the group ID of the
descriptor table.
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20231018171456.1624030-6-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Userspace knows if the device has dedicated descriptor group or not
by checking this feature bit.
It's only exposed if the vdpa driver backend implements the
.get_vq_desc_group() operation callback. Userspace trying to negotiate
this feature when it or the dependent _F_IOTLB_ASID feature hasn't
been exposed will result in an error.
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20231018171456.1624030-5-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Lei Yang <leiyang@redhat.com>
This operation allow vdpa parent to expose its own backend feature bits.
Next patches introduce a feature not compatible with all parent drivers:
the ability to enable vq after driver_ok. Each parent must declare if
it allows it or not.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Message-Id: <20230609092127.170673-4-eperezma@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Accepting VHOST_BACKEND_F_ENABLE_AFTER_DRIVER_OK backend feature if
userland sets it.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Message-Id: <20230609092127.170673-3-eperezma@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
- Yosry has also eliminated cgroup's atomic rstat flushing.
- Nhat Pham adds the new cachestat() syscall. It provides userspace
with the ability to query pagecache status - a similar concept to
mincore() but more powerful and with improved usability.
- Mel Gorman provides more optimizations for compaction, reducing the
prevalence of page rescanning.
- Lorenzo Stoakes has done some maintanance work on the get_user_pages()
interface.
- Liam Howlett continues with cleanups and maintenance work to the maple
tree code. Peng Zhang also does some work on maple tree.
- Johannes Weiner has done some cleanup work on the compaction code.
- David Hildenbrand has contributed additional selftests for
get_user_pages().
- Thomas Gleixner has contributed some maintenance and optimization work
for the vmalloc code.
- Baolin Wang has provided some compaction cleanups,
- SeongJae Park continues maintenance work on the DAMON code.
- Huang Ying has done some maintenance on the swap code's usage of
device refcounting.
- Christoph Hellwig has some cleanups for the filemap/directio code.
- Ryan Roberts provides two patch series which yield some
rationalization of the kernel's access to pte entries - use the provided
APIs rather than open-coding accesses.
- Lorenzo Stoakes has some fixes to the interaction between pagecache
and directio access to file mappings.
- John Hubbard has a series of fixes to the MM selftesting code.
- ZhangPeng continues the folio conversion campaign.
- Hugh Dickins has been working on the pagetable handling code, mainly
with a view to reducing the load on the mmap_lock.
- Catalin Marinas has reduced the arm64 kmalloc() minimum alignment from
128 to 8.
- Domenico Cerasuolo has improved the zswap reclaim mechanism by
reorganizing the LRU management.
- Matthew Wilcox provides some fixups to make gfs2 work better with the
buffer_head code.
- Vishal Moola also has done some folio conversion work.
- Matthew Wilcox has removed the remnants of the pagevec code - their
functionality is migrated over to struct folio_batch.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZJejewAKCRDdBJ7gKXxA
joggAPwKMfT9lvDBEUnJagY7dbDPky1cSYZdJKxxM2cApGa42gEA6Cl8HRAWqSOh
J0qXCzqaaN8+BuEyLGDVPaXur9KirwY=
=B7yQ
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull mm updates from Andrew Morton:
- Yosry Ahmed brought back some cgroup v1 stats in OOM logs
- Yosry has also eliminated cgroup's atomic rstat flushing
- Nhat Pham adds the new cachestat() syscall. It provides userspace
with the ability to query pagecache status - a similar concept to
mincore() but more powerful and with improved usability
- Mel Gorman provides more optimizations for compaction, reducing the
prevalence of page rescanning
- Lorenzo Stoakes has done some maintanance work on the
get_user_pages() interface
- Liam Howlett continues with cleanups and maintenance work to the
maple tree code. Peng Zhang also does some work on maple tree
- Johannes Weiner has done some cleanup work on the compaction code
- David Hildenbrand has contributed additional selftests for
get_user_pages()
- Thomas Gleixner has contributed some maintenance and optimization
work for the vmalloc code
- Baolin Wang has provided some compaction cleanups,
- SeongJae Park continues maintenance work on the DAMON code
- Huang Ying has done some maintenance on the swap code's usage of
device refcounting
- Christoph Hellwig has some cleanups for the filemap/directio code
- Ryan Roberts provides two patch series which yield some
rationalization of the kernel's access to pte entries - use the
provided APIs rather than open-coding accesses
- Lorenzo Stoakes has some fixes to the interaction between pagecache
and directio access to file mappings
- John Hubbard has a series of fixes to the MM selftesting code
- ZhangPeng continues the folio conversion campaign
- Hugh Dickins has been working on the pagetable handling code, mainly
with a view to reducing the load on the mmap_lock
- Catalin Marinas has reduced the arm64 kmalloc() minimum alignment
from 128 to 8
- Domenico Cerasuolo has improved the zswap reclaim mechanism by
reorganizing the LRU management
- Matthew Wilcox provides some fixups to make gfs2 work better with the
buffer_head code
- Vishal Moola also has done some folio conversion work
- Matthew Wilcox has removed the remnants of the pagevec code - their
functionality is migrated over to struct folio_batch
* tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (380 commits)
mm/hugetlb: remove hugetlb_set_page_subpool()
mm: nommu: correct the range of mmap_sem_read_lock in task_mem()
hugetlb: revert use of page_cache_next_miss()
Revert "page cache: fix page_cache_next/prev_miss off by one"
mm/vmscan: fix root proactive reclaim unthrottling unbalanced node
mm: memcg: rename and document global_reclaim()
mm: kill [add|del]_page_to_lru_list()
mm: compaction: convert to use a folio in isolate_migratepages_block()
mm: zswap: fix double invalidate with exclusive loads
mm: remove unnecessary pagevec includes
mm: remove references to pagevec
mm: rename invalidate_mapping_pagevec to mapping_try_invalidate
mm: remove struct pagevec
net: convert sunrpc from pagevec to folio_batch
i915: convert i915_gpu_error to use a folio_batch
pagevec: rename fbatch_count()
mm: remove check_move_unevictable_pages()
drm: convert drm_gem_put_pages() to use a folio_batch
i915: convert shmem_sg_free_table() to use a folio_batch
scatterlist: add sg_set_folio()
...
We are now in a position where no caller of pin_user_pages() requires the
vmas parameter at all, so eliminate this parameter from the function and
all callers.
This clears the way to removing the vmas parameter from GUP altogether.
Link: https://lkml.kernel.org/r/195a99ae949c9f5cb589d2222b736ced96ec199a.1684350871.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> [qib]
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> [drivers/media]
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Sean Christopherson <seanjc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use the right structs for PACKED or split vqs when setting and
getting the vring base.
Fixes: 4c8cf31885 ("vhost: introduce vDPA-based backend")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Message-Id: <20230424225031.18947-4-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
As is done in the net, iscsi, and vsock vhost support, let the vdpa vqs
know about the features that have been negotiated. This allows vhost
to more safely make decisions based on the features, such as when using
PACKED vs split queues.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230424225031.18947-2-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
reduction in interrupt rate in virtio
perf improvement for VDUSE
scalability for vhost-scsi
non power of 2 ring support for packed rings
better management for mlx5 vdpa
suspend for snet
VIRTIO_F_NOTIFICATION_DATA
shared backend with vdpa-sim-blk
user VA support in vdpa-sim
better struct packing for virtio
fixes, cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmRG+QcPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpMyAIALpq8Z9ljl7ADGLuvt/xeCnIdifo7NXam71s
+algalRplF3QplnMxZ0vH19Z8Gvyl18fkk/l0tHoCrZZgyseYR6DbyZXPv8YIfFh
NSBokhil+ZURH6eNJc2PLcBUF3QIL3rSv7tBq7/++PN3KIqdHIePbyUFLlwqb272
NLkOkHT30QBtncRWJORj/GqDxi/4H1zHDmfMd6xD/1B6IrC3gin205RnLuCa2H65
bP0IE025VrmrRqNGX7nhi7dIFo6SmMPwG5O0YWeEhFHaSOL9PJM/Z9EN4tLhC1v1
Y34fryH9e+MMSgBnCK2ExxTq/pGWsbhPbvisDfDf3M1m1HHfhYI=
=N1SV
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
"virtio,vhost,vdpa: features, fixes, and cleanups:
- reduction in interrupt rate in virtio
- perf improvement for VDUSE
- scalability for vhost-scsi
- non power of 2 ring support for packed rings
- better management for mlx5 vdpa
- suspend for snet
- VIRTIO_F_NOTIFICATION_DATA
- shared backend with vdpa-sim-blk
- user VA support in vdpa-sim
- better struct packing for virtio
and fixes, cleanups all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (52 commits)
vhost_vdpa: fix unmap process in no-batch mode
MAINTAINERS: make me a reviewer of VIRTIO CORE AND NET DRIVERS
tools/virtio: fix build caused by virtio_ring changes
virtio_ring: add a struct device forward declaration
vdpa_sim_blk: support shared backend
vdpa_sim: move buffer allocation in the devices
vdpa/snet: use likely/unlikely macros in hot functions
vdpa/snet: implement kick_vq_with_data callback
virtio-vdpa: add VIRTIO_F_NOTIFICATION_DATA feature support
virtio: add VIRTIO_F_NOTIFICATION_DATA feature support
vdpa/snet: support the suspend vDPA callback
vdpa/snet: support getting and setting VQ state
MAINTAINERS: add vringh.h to Virtio Core and Net Drivers
vringh: address kdoc warnings
vdpa: address kdoc warnings
virtio_ring: don't update event idx on get_buf
vdpa_sim: add support for user VA
vdpa_sim: replace the spinlock with a mutex to protect the state
vdpa_sim: use kthread worker
vdpa_sim: make devices agnostic for work management
...
While using the vdpa device with vIOMMU enabled
in the guest VM, when the vdpa device bind to vfio-pci and run testpmd
then system will fail to unmap.
The test process is
Load guest VM --> attach to virtio driver--> bind to vfio-pci driver
So the mapping process is
1)batched mode map to normal MR
2)batched mode unmapped the normal MR
3)unmapped all the memory
4)mapped to iommu MR
This error happened in step 3). The iotlb was freed in step 2)
and the function vhost_vdpa_process_iotlb_msg will return fail
Which causes failure.
To fix this, we will not remove the AS while the iotlb->nmaps is 0.
This will free in the vhost_vdpa_clean
Cc: stable@vger.kernel.org
Fixes: aaca8373c4 ("vhost-vdpa: support ASID based IOTLB API")
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20230420151734.860168-1-lulu@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When the user call VHOST_SET_OWNER ioctl and the vDPA device
has `use_va` set to true, let's call the bind_mm callback.
In this way we can bind the device to the user address space
and directly use the user VA.
The unbind_mm callback is called during the release after
stopping the device.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20230404131326.44403-3-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add eventfd for the vdpa callback so that user
can signal it directly instead of triggering the
callback. It will be used for vhost-vdpa case.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Message-Id: <20230323053043.35-9-xieyongji@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
We need the fixes in here for testing, as well as the driver core
changes for documentation updates to build on.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently vhost_vdpa_cleanup() unmaps the DMA mappings by calling
`iommu_unmap(v->domain, map->start, map->size);`
from vhost_vdpa_general_unmap() when the parent vDPA driver doesn't
provide DMA config operations.
However, the IOMMU domain referred to by `v->domain` is freed in
vhost_vdpa_free_domain() before vhost_vdpa_cleanup() in
vhost_vdpa_release() which results in NULL pointer de-reference.
Accordingly, moving the call to vhost_vdpa_free_domain() in
vhost_vdpa_cleanup() would makes sense. This will also help
detaching the dma device in error handling of vhost_vdpa_alloc_domain().
This issue was observed on terminating QEMU with SIGQUIT.
Fixes: 037d430556 ("vhost-vdpa: call vhost_vdpa_cleanup during the release")
Signed-off-by: Gautam Dawar <gautam.dawar@amd.com>
Message-Id: <20230301163203.29883-1-gautam.dawar@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
device feature provisioning in ifcvf, mlx5
new SolidNET driver
support for zoned block device in virtio blk
numa support in virtio pmem
VIRTIO_F_RING_RESET support in vhost-net
more debugfs entries in mlx5
resume support in vdpa
completion batching in virtio blk
cleanup of dma api use in vdpa
now simulating more features in vdpa-sim
documentation, features, fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmP0D98PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpV6IH/iecRgLMWWjp3n31IFdu31f/J4HpF7dczVjK
qtV98eJ1N2pkgeJkdCfmB5XszfvFBeAurrS7++FTHiJhrRfR3Z+2ml/Qtvh5DEyP
qxz6wOw6VVsi/txdUxM1wsxLeEmmzkmFdAmPM+FXeIjhWj76GOgy/4A3eaj6TgzV
W8ShsBve/UZ5qMOC3XbIscvdOrudHJ18tH90Tiz3NZfH1fAs5E4uWbU6Mrz9DJVr
canGvf4kAI9z8qram5HSgzPIXRJEYiF4q/eiStdtiiME8gL1mHLRZDNP1I1LeCAb
q6Q6RCRKi3Ek+LGdH6u+nR1Swu03N2b/g+vgKtv30kJo06oZVzw=
=EasV
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
- device feature provisioning in ifcvf, mlx5
- new SolidNET driver
- support for zoned block device in virtio blk
- numa support in virtio pmem
- VIRTIO_F_RING_RESET support in vhost-net
- more debugfs entries in mlx5
- resume support in vdpa
- completion batching in virtio blk
- cleanup of dma api use in vdpa
- now simulating more features in vdpa-sim
- documentation, features, fixes all over the place
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (64 commits)
vdpa/mlx5: support device features provisioning
vdpa/mlx5: make MTU/STATUS presence conditional on feature bits
vdpa: validate device feature provisioning against supported class
vdpa: validate provisioned device features against specified attribute
vdpa: conditionally read STATUS in config space
vdpa: fix improper error message when adding vdpa dev
vdpa/mlx5: Initialize CVQ iotlb spinlock
vdpa/mlx5: Don't clear mr struct on destroy MR
vdpa/mlx5: Directly assign memory key
tools/virtio: enable to build with retpoline
vringh: fix a typo in comments for vringh_kiov
vhost-vdpa: print warning when vhost_vdpa_alloc_domain fails
scsi: virtio_scsi: fix handling of kmalloc failure
vdpa: Fix a couple of spelling mistakes in some messages
vhost-net: support VIRTIO_F_RING_RESET
vhost-scsi: convert sysfs snprintf and sprintf to sysfs_emit
vdpa: mlx5: support per virtqueue dma device
vdpa: set dma mask for vDPA device
virtio-vdpa: support per vq dma device
vdpa: introduce get_vq_dma_device()
...
Including:
- Consolidate iommu_map/unmap functions. There have been
blocking and atomic variants so far, but that was problematic
as this approach does not scale with required new variants
which just differ in the GFP flags used.
So Jason consolidated this back into single functions that
take a GFP parameter. This has the potential to cause
conflicts with other trees, as they introduce new call-sites
for the changed functions. I offered them to pull in the
branch containing these changes and resolve it, but I am not
sure everyone did that. The conflicts this caused with
upstream up to v6.2-rc8 are resolved in the final merge
commit.
- Retire the detach_dev() call-back in iommu_ops
- Arm SMMU updates from Will:
- Device-tree binding updates:
* Cater for three power domains on SM6375
* Document existing compatible strings for Qualcomm SoCs
* Tighten up clocks description for platform-specific compatible strings
- Enable Qualcomm workarounds for some additional platforms that need them
- Intel VT-d updates from Lu Baolu:
- Add Intel IOMMU performance monitoring support
- Set No Execute Enable bit in PASID table entry
- Two performance optimizations
- Fix PASID directory pointer coherency
- Fix missed rollbacks in error path
- Cleanups
- Apple t8110 DART support
- Exynos IOMMU:
- Implement better fault handling
- Error handling fixes
- Renesas IPMMU:
- Add device tree bindings for r8a779g0
- AMD IOMMU:
- Various fixes for handling on SNP-enabled systems and
handling of faults with unknown request-ids
- Cleanups and other small fixes
- Various other smaller fixes and cleanups
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEr9jSbILcajRFYWYyK/BELZcBGuMFAmP0hDwACgkQK/BELZcB
GuM43RAA0YieShO+X0h6TFGfbK0zVoPd91giZehWBv9rHK7pP4iY8UEtBLBWGx/t
CId4t98mmKmC212zz8QxrwAEzyTIRY+2t1yrpG2aVkoTYk8inMb07TU37wganh3O
T0QccXN+9b2BS4k8yro5f3uX0d/C1JQVcMowwr53VMb/e73huqP1VTbz06/CIWMH
DUhVRCzmNhSvoUOT5n7g6+ZDH+pot8WPZbtHV7FowEsmPCRc7Fj8kXyI9FEwKwrZ
hIV5Y+6Lej8nQScgbO8MfblJym3VrBoSoM4GY2w0L0rjQw6m+Xtea5rT0W39YVWy
YpiscLTL8TIMPP9zK1dXVygTaABK4J2iWmheHPkpKXIhK0iuH3Dke0Do5p6DNITj
7J2YlaNEB480D5hvNBKsbbGHavgGPT8m529Sz0R7mSC7omRzqiG5Vsb46IXL+2bc
92ojjYNfXb6OCtagIr2LMBLZRL2JCODqF1dUmyZfA8GKOHLP5kZXoMM+sZbQ2aUL
1LOxRZVx+tlb9V4VaH1ZSs/6eM+HLDzjtHeu3PoWYf6mW4AEt4S/yl9SKAkGdBqt
jCUErmYB1nU/eefqG1jhWRpQeJabcT3Oe30NZru1pfMoREThhjbAACw1JxWtoe1X
ipGpV6lAP7tQUGuRk3/9O1lNqElJuNwC5lVTjS4FJ38vYQhQbao=
=ZaZV
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Consolidate iommu_map/unmap functions.
There have been blocking and atomic variants so far, but that was
problematic as this approach does not scale with required new
variants which just differ in the GFP flags used. So Jason
consolidated this back into single functions that take a GFP
parameter.
- Retire the detach_dev() call-back in iommu_ops
- Arm SMMU updates from Will:
- Device-tree binding updates:
- Cater for three power domains on SM6375
- Document existing compatible strings for Qualcomm SoCs
- Tighten up clocks description for platform-specific
compatible strings
- Enable Qualcomm workarounds for some additional platforms that
need them
- Intel VT-d updates from Lu Baolu:
- Add Intel IOMMU performance monitoring support
- Set No Execute Enable bit in PASID table entry
- Two performance optimizations
- Fix PASID directory pointer coherency
- Fix missed rollbacks in error path
- Cleanups
- Apple t8110 DART support
- Exynos IOMMU:
- Implement better fault handling
- Error handling fixes
- Renesas IPMMU:
- Add device tree bindings for r8a779g0
- AMD IOMMU:
- Various fixes for handling on SNP-enabled systems and
handling of faults with unknown request-ids
- Cleanups and other small fixes
- Various other smaller fixes and cleanups
* tag 'iommu-updates-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (71 commits)
iommu/amd: Skip attach device domain is same as new domain
iommu: Attach device group to old domain in error path
iommu/vt-d: Allow to use flush-queue when first level is default
iommu/vt-d: Fix PASID directory pointer coherency
iommu/vt-d: Avoid superfluous IOTLB tracking in lazy mode
iommu/vt-d: Fix error handling in sva enable/disable paths
iommu/amd: Improve page fault error reporting
iommu/amd: Do not identity map v2 capable device when snp is enabled
iommu: Fix error unwind in iommu_group_alloc()
iommu/of: mark an unused function as __maybe_unused
iommu: dart: DART_T8110_ERROR range should be 0 to 5
iommu/vt-d: Enable IOMMU perfmon support
iommu/vt-d: Add IOMMU perfmon overflow handler support
iommu/vt-d: Support cpumask for IOMMU perfmon
iommu/vt-d: Add IOMMU perfmon support
iommu/vt-d: Support Enhanced Command Interface
iommu/vt-d: Retrieve IOMMU perfmon capability information
iommu/vt-d: Support size of the register set in DRHD
iommu/vt-d: Set No Execute Enable bit in PASID table entry
iommu/vt-d: Remove sva from intel_svm_dev
...
Add a print explaining why vhost_vdpa_alloc_domain failed if the device
is not IOMMU cache coherent capable.
Without this print, we have no hint why the operation failed.
For example:
$ virsh start <domain>
error: Failed to start domain <domain>
error: Unable to open '/dev/vhost-vdpa-<idx>' for vdpa device:
Unknown error 524
Suggested-by: Eugenio Perez Martin <eperezma@redhat.com>
Signed-off-by: Alvaro Karsz <alvaro.karsz@solid-run.com>
Message-Id: <20230202084212.1328530-1-alvaro.karsz@solid-run.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Eugenio Pérez Martin <eperezma@redhat.com>
This new ioctl adds support for resuming the device from userspace.
This is required when trying to restore the device in a functioning
state after it's been suspended. It is already possible to reset a
suspended device, but that means the device must be reconfigured and
all the IOMMU/IOTLB mappings must be recreated. This new operation
allows the device to be resumed without going through a full reset.
This is particularly useful when trying to perform offline migration of
a virtual machine (also known as snapshot/restore) as it allows the VMM
to resume the virtual machine back to a running state after the snapshot
is performed.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Message-Id: <73b75fb87d25cff59768b4955a81fe7ffe5b4770.1672742878.git.sebastien.boeuf@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Userspace knows if the device can be resumed or not by checking this
feature bit.
It's only exposed if the vdpa driver backend implements the resume()
operation callback. Userspace trying to negotiate this feature when it
hasn't been exposed will result in an error.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Message-Id: <b18db236ba3d990cdb41278eb4703be9201d9514.1672742878.git.sebastien.boeuf@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Replace direct modifications to vma->vm_flags with calls to modifier
functions to be able to track flag changes and to keep vma locking
correctness.
[akpm@linux-foundation.org: fix drivers/misc/open-dice.c, per Hyeonggon Yoo]
Link: https://lkml.kernel.org/r/20230126193752.297968-5-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjun Roy <arjunroy@google.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: David Rientjes <rientjes@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Laurent Dufour <ldufour@linux.ibm.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Minchan Kim <minchan@google.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Peter Oskolkov <posk@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Punit Agrawal <punit.agrawal@bytedance.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The internal mechanisms support this, but instead of exposting the gfp to
the caller it wrappers it into iommu_map() and iommu_map_atomic()
Fix this instead of adding more variants for GFP_KERNEL_ACCOUNT.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/1-v3-76b587fe28df+6e3-iommu_map_gfp_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Before commit 3d56987938 ("vhost-vdpa: introduce asid based IOTLB")
we called vhost_vdpa_iotlb_unmap(v, iotlb, 0ULL, 0ULL - 1) during
release to free all the resources allocated when processing user IOTLB
messages through vhost_vdpa_process_iotlb_update().
That commit changed the handling of IOTLB a bit, and we accidentally
removed some code called during the release.
We partially fixed this with commit 037d430556 ("vhost-vdpa: call
vhost_vdpa_cleanup during the release") but a potential memory leak is
still there as showed by kmemleak if the application does not send
VHOST_IOTLB_INVALIDATE or crashes:
unreferenced object 0xffff888007fbaa30 (size 16):
comm "blkio-bench", pid 914, jiffies 4294993521 (age 885.500s)
hex dump (first 16 bytes):
40 73 41 07 80 88 ff ff 00 00 00 00 00 00 00 00 @sA.............
backtrace:
[<0000000087736d2a>] kmem_cache_alloc_trace+0x142/0x1c0
[<0000000060740f50>] vhost_vdpa_process_iotlb_msg+0x68c/0x901 [vhost_vdpa]
[<0000000083e8e205>] vhost_chr_write_iter+0xc0/0x4a0 [vhost]
[<000000008f2f414a>] vhost_vdpa_chr_write_iter+0x18/0x20 [vhost_vdpa]
[<00000000de1cd4a0>] vfs_write+0x216/0x4b0
[<00000000a2850200>] ksys_write+0x71/0xf0
[<00000000de8e720b>] __x64_sys_write+0x19/0x20
[<0000000018b12cbb>] do_syscall_64+0x3f/0x90
[<00000000986ec465>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
Let's fix this calling vhost_vdpa_iotlb_unmap() on the whole range in
vhost_vdpa_remove_as(). We move that call before vhost_dev_cleanup()
since we need a valid v->vdev.mm in vhost_vdpa_pa_unmap().
vhost_iotlb_reset() call can be removed, since vhost_vdpa_iotlb_unmap()
on the whole range removes all the entries.
The kmemleak log reported was observed with a vDPA device that has `use_va`
set to true (e.g. VDUSE). This patch has been tested with both types of
devices.
Fixes: 037d430556 ("vhost-vdpa: call vhost_vdpa_cleanup during the release")
Fixes: 3d56987938 ("vhost-vdpa: introduce asid based IOTLB")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20221109154213.146789-1-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
The ioctl adds support for suspending the device from userspace.
This is a must before getting virtqueue indexes (base) for live migration,
since the device could modify them after userland gets them. There are
individual ways to perform that action for some devices
(VHOST_NET_SET_BACKEND, VHOST_VSOCK_SET_RUNNING, ...) but there was no
way to perform it for any vhost device (and, in particular, vhost-vdpa).
After a successful return of the ioctl call the device must not process
more virtqueue descriptors. The device can answer to read or writes of
config fields as if it were not suspended. In particular, writing to
"queue_enable" with a value of 1 will not make the device start
processing buffers of the virtqueue.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20220810171512.2343333-4-eperezma@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Userland knows if it can suspend the device or not by checking this feature
bit.
It's only offered if the vdpa driver backend implements the suspend()
operation callback, and to offer it or userland to ack it if the backend
does not offer that callback is an error.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20220810171512.2343333-3-eperezma@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In function vhost_vdpa_probe(), when code execution fails, we should
call ida_simple_remove() to free ida.
Signed-off-by: Bo Liu <liubo03@inspur.com>
Message-Id: <20220805091254.20026-1-liubo03@inspur.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use the new interface to check the capability for our device
specifically.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Message-Id: <548e316fa282ce513fabb991a4c4d92258062eb5.1654688822.git.robin.murphy@arm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Before commit 3d56987938 ("vhost-vdpa: introduce asid based IOTLB")
we call vhost_vdpa_iotlb_free() during the release to clean all regions
mapped in the iotlb.
That commit removed vhost_vdpa_iotlb_free() and added vhost_vdpa_cleanup()
to do some cleanup, including deleting all mappings, but we forgot to call
it in vhost_vdpa_release().
This causes that if an application does not remove all mappings explicitly
(or it crashes), the mappings remain in the iotlb and subsequent
applications may fail if they map the same addresses.
Calling vhost_vdpa_cleanup() also fixes a memory leak since we are not
freeing `v->vdev.vqs` during the release from the same commit.
Since vhost_vdpa_cleanup() calls vhost_dev_cleanup() we can remove its
call from vhost_vdpa_release().
Fixes: 3d56987938 ("vhost-vdpa: introduce asid based IOTLB")
Cc: gautam.dawar@xilinx.com
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20220622151407.51232-1-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
This patch makes get_vq_group and set_group_asid optional. This is
needed to unbreak the vDPA parent that doesn't support multiple
address spaces.
Cc: Gautam Dawar <gautam.dawar@xilinx.com>
Fixes: aaca8373c4 ("vhost-vdpa: support ASID based IOTLB API")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220609041901.2029-1-jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The copy_to_user() function returns the number of bytes remaining to be
copied. However, we need to return a negative error code, -EFAULT, to
the user.
Fixes: 87f4c217413a ("vhost-vdpa: introduce uAPI to get the number of virtqueue groups")
Fixes: e96ef636f154 ("vhost-vdpa: introduce uAPI to get the number of address spaces")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Message-Id: <YotG1vXKXXSayr63@kili>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
This patch extends the vhost-vdpa to support ASID based IOTLB API. The
vhost-vdpa device will allocated multiple IOTLBs for vDPA device that
supports multiple address spaces. The IOTLBs and vDPA device memory
mappings is determined and maintained through ASID.
Note that we still don't support vDPA device with more than one
address spaces that depends on platform IOMMU. This work will be done
by moving the IOMMU logic from vhost-vDPA to vDPA device driver.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Gautam Dawar <gdawar@xilinx.com>
Message-Id: <20220330180436.24644-16-gdawar@xilinx.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Includes fixup:
vhost-vdpa: Fix some error handling path in vhost_vdpa_process_iotlb_msg()
In the error paths introduced by the original patch, a mutex may be left locked.
Add the correct goto instead of a direct return.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Message-Id: <89ef0ae4c26ac3cfa440c71e97e392dcb328ac1b.1653227924.git.christophe.jaillet@wanadoo.fr>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Follows the vDPA support for associating ASID to a specific virtqueue
group. This patch adds a uAPI to support setting them from userspace.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Gautam Dawar <gdawar@xilinx.com>
Message-Id: <20220330180436.24644-15-gdawar@xilinx.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Follows the support for virtqueue group in vDPA. This patches
introduces uAPI to get the virtqueue group ID for a specific virtqueue
in vhost-vdpa.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Gautam Dawar <gdawar@xilinx.com>
Message-Id: <20220330180436.24644-14-gdawar@xilinx.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
