In older platforms, the number of links was constant and hard-coded to
4. Newer platforms can have varying number of links, so we need to add
a probe-time check to make sure the ACPI-reported information with
_DSD properties is aligned with hardware capabilities reported in the
SoundWire LCAP register.
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240819005548.5867-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Here is the big set of driver core changes for 6.11-rc1.
Lots of stuff in here, with not a huge diffstat, but apis are evolving
which required lots of files to be touched. Highlights of the changes
in here are:
- platform remove callback api final fixups (Uwe took many releases to
get here, finally!)
- Rust bindings for basic firmware apis and initial driver-core
interactions. It's not all that useful for a "write a whole driver
in rust" type of thing, but the firmware bindings do help out the
phy rust drivers, and the driver core bindings give a solid base on
which others can start their work. There is still a long way to go
here before we have a multitude of rust drivers being added, but
it's a great first step.
- driver core const api changes. This reached across all bus types,
and there are some fix-ups for some not-common bus types that
linux-next and 0-day testing shook out. This work is being done to
help make the rust bindings more safe, as well as the C code, moving
toward the end-goal of allowing us to put driver structures into
read-only memory. We aren't there yet, but are getting closer.
- minor devres cleanups and fixes found by code inspection
- arch_topology minor changes
- other minor driver core cleanups
All of these have been in linux-next for a very long time with no
reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZqH+aQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymoOQCfVBdLcBjEDAGh3L8qHRGMPy4rV2EAoL/r+zKm
cJEYtJpGtWX6aAtugm9E
=ZyJV
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big set of driver core changes for 6.11-rc1.
Lots of stuff in here, with not a huge diffstat, but apis are evolving
which required lots of files to be touched. Highlights of the changes
in here are:
- platform remove callback api final fixups (Uwe took many releases
to get here, finally!)
- Rust bindings for basic firmware apis and initial driver-core
interactions.
It's not all that useful for a "write a whole driver in rust" type
of thing, but the firmware bindings do help out the phy rust
drivers, and the driver core bindings give a solid base on which
others can start their work.
There is still a long way to go here before we have a multitude of
rust drivers being added, but it's a great first step.
- driver core const api changes.
This reached across all bus types, and there are some fix-ups for
some not-common bus types that linux-next and 0-day testing shook
out.
This work is being done to help make the rust bindings more safe,
as well as the C code, moving toward the end-goal of allowing us to
put driver structures into read-only memory. We aren't there yet,
but are getting closer.
- minor devres cleanups and fixes found by code inspection
- arch_topology minor changes
- other minor driver core cleanups
All of these have been in linux-next for a very long time with no
reported problems"
* tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
ARM: sa1100: make match function take a const pointer
sysfs/cpu: Make crash_hotplug attribute world-readable
dio: Have dio_bus_match() callback take a const *
zorro: make match function take a const pointer
driver core: module: make module_[add|remove]_driver take a const *
driver core: make driver_find_device() take a const *
driver core: make driver_[create|remove]_file take a const *
firmware_loader: fix soundness issue in `request_internal`
firmware_loader: annotate doctests as `no_run`
devres: Correct code style for functions that return a pointer type
devres: Initialize an uninitialized struct member
devres: Fix memory leakage caused by driver API devm_free_percpu()
devres: Fix devm_krealloc() wasting memory
driver core: platform: Switch to use kmemdup_array()
driver core: have match() callback in struct bus_type take a const *
MAINTAINERS: add Rust device abstractions to DRIVER CORE
device: rust: improve safety comments
MAINTAINERS: add Danilo as FIRMWARE LOADER maintainer
MAINTAINERS: add Rust FW abstractions to FIRMWARE LOADER
firmware: rust: improve safety comments
...
- Simplification across subsystem using cleanup.h
- Support for debugfs to read/write commands
- Few Intel and Qualcomm driver updates
-----BEGIN PGP SIGNATURE-----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=FNSV
-----END PGP SIGNATURE-----
Merge tag 'soundwire-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
- Simplification across subsystem using cleanup.h
- Support for debugfs to read/write commands
- Few Intel and Qualcomm driver updates
* tag 'soundwire-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: debugfs: simplify with cleanup.h
soundwire: cadence: simplify with cleanup.h
soundwire: intel_ace2x: simplify with cleanup.h
soundwire: intel_ace2x: simplify return path in hw_params
soundwire: intel: simplify with cleanup.h
soundwire: intel: simplify return path in hw_params
soundwire: amd_init: simplify with cleanup.h
soundwire: amd: simplify with cleanup.h
soundwire: amd: simplify return path in hw_params
soundwire: intel_auxdevice: start the bus at default frequency
soundwire: intel_auxdevice: add cs42l43 codec to wake_capable_list
drivers:soundwire: qcom: cleanup port maask calculations
soundwire: bus: simplify by using local slave->prop
soundwire: generic_bandwidth_allocation: change port_bo parameter to pointer
soundwire: Intel: clarify Copyright information
soundwire: intel_ace2.x: add AC timing extensions for PantherLake
soundwire: bus: add stream refcount
soundwire: debugfs: add interface to read/write commands
Lots of changes in this cycle, but mostly for cleanups and
refactoring. Significant amount of changes are about DT schema
conversions for ASoC at this time while we see other usual
suspects, too. Some highlights below:
Core:
- Re-introduction of PCM sync ID support API
- MIDI2 time-base extension in ALSA sequencer API
ASoC:
- Syncing of features between simple-audio-card and the two
audio-graph cards
- Support for specifying the order of operations for components
within cards to allow quirking for unusual systems
- Lots of DT schema conversions
- Continued SOF/Intel updates for topology, SoundWire, IPC3/4
- New support for Asahi Kasei AK4619, Cirrus Logic CS530x, Everest
Semiconductors ES8311, NXP i.MX95 and LPC32xx, Qualcomm LPASS
v2.5 and WCD937x, Realtek RT1318 and RT1320 and Texas
Instruments PCM5242
HD-audio:
- More quirks, Intel PantherLake support, senarytech codec support
- Refactoring of Cirrus codec component-binding
Others:
- ALSA control kselftest improvements, and fixes for input value
checks in various drivers
-----BEGIN PGP SIGNATURE-----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=hn0h
-----END PGP SIGNATURE-----
Merge tag 'sound-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"Lots of changes in this cycle, but mostly for cleanups and
refactoring.
Significant amount of changes are about DT schema conversions for ASoC
at this time while we see other usual suspects, too.
Some highlights below:
Core:
- Re-introduction of PCM sync ID support API
- MIDI2 time-base extension in ALSA sequencer API
ASoC:
- Syncing of features between simple-audio-card and the two
audio-graph cards
- Support for specifying the order of operations for components
within cards to allow quirking for unusual systems
- Lots of DT schema conversions
- Continued SOF/Intel updates for topology, SoundWire, IPC3/4
- New support for Asahi Kasei AK4619, Cirrus Logic CS530x, Everest
Semiconductors ES8311, NXP i.MX95 and LPC32xx, Qualcomm LPASS v2.5
and WCD937x, Realtek RT1318 and RT1320 and Texas Instruments
PCM5242
HD-audio:
- More quirks, Intel PantherLake support, senarytech codec support
- Refactoring of Cirrus codec component-binding
Others:
- ALSA control kselftest improvements, and fixes for input value
checks in various drivers"
* tag 'sound-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (349 commits)
kselftest/alsa: Log the PCM ID in pcm-test
kselftest/alsa: Use card name rather than number in test names
ALSA: hda/realtek: Fix the speaker output on Samsung Galaxy Book Pro 360
ALSA: hda/tas2781: Add new quirk for Lenovo Hera2 Laptop
ALSA: seq: ump: Skip useless ports for static blocks
ALSA: pcm_dmaengine: Don't synchronize DMA channel when DMA is paused
ALSA: usb: Use BIT() for bit values
ALSA: usb: Fix UBSAN warning in parse_audio_unit()
ALSA: hda/realtek: Enable headset mic on Positivo SU C1400
ASoC: tas2781: Add new Kontrol to set tas2563 digital Volume
ASoC: codecs: wcd937x: Remove separate handling for vdd-buck supply
ASoC: codecs: wcd937x: Remove the string compare in MIC BIAS widget settings
ASoC: codecs: wcd937x-sdw: Fix Unbalanced pm_runtime_enable
ASoC: dt-bindings: cirrus,cs42xx8: Convert to dtschema
ASoC: cs530x: Remove bclk from private structure
ASoC: cs530x: Calculate proper bclk rate using TDM
ASoC: dt-bindings: cirrus,cs4270: Convert to dtschema
firmware: cs_dsp: Rename fw_ver to wmfw_ver
firmware: cs_dsp: Clarify wmfw format version log message
firmware: cs_dsp: Make wmfw and bin filename arguments const char *
...
When platform firmware exposes multiple supported bus frequencies, the
existing SoundWire support selects the maximum frequency. This is not
aligned with the SoundWire 1.2 directions: the MIPI recommendation is
to start at a 'safe' speed, compatible with the default frame rate and
shape, and only increase the clock when vendor and codec PHY
parameters are updated.
However, clock changes are not supported for now by the SoundWire
core, so in practice this patch has the effect of discarding
frequencies different to the implicit default. Dynamic clock changes
will be required at some point, and this limitation will be removed
after the core is updated, specifically to perform synchronous clock
scale changes on manager and peripheral sides with a bank switch.
On Intel LunarLake platforms with a 'standard' DSDT, this forces the
use of 4.8MHz. On older platforms this patch has no effect.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20240704003411.10347-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
cs42l43 has wake capability. Add it to the wake_capable_list.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240705114305.160233-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In the match() callback, the struct device_driver * should not be
changed, so change the function callback to be a const *. This is one
step of many towards making the driver core safe to have struct
device_driver in read-only memory.
Because the match() callback is in all busses, all busses are modified
to handle this properly. This does entail switching some container_of()
calls to container_of_const() to properly handle the constant *.
For some busses, like PCI and USB and HV, the const * is cast away in
the match callback as those busses do want to modify those structures at
this point in time (they have a local lock in the driver structure.)
That will have to be changed in the future if they wish to have their
struct device * in read-only-memory.
Cc: Rafael J. Wysocki <rafael@kernel.org>
Reviewed-by: Alex Elder <elder@kernel.org>
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Link: https://lore.kernel.org/r/2024070136-wrongdoer-busily-01e8@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cleanup the port map calculations, existing masks of having separate
masks for in and out ports is not really required.
Having a single mask for all the ports in the controller is simple and
cuts of some unnecessary code.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240618-soundwire-port-map-v1-1-9644e5545b9b@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The sdw_initialize_slave() function stores 'slave->prop' as local 'prop'
variable, so use it in all applicable places to make code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240620091046.12426-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Currently, we do port_bo += bps * ch in both inside and outside
sdw_compute_master_ports(). We can pass port_bo as a pointer and only
calculate port_bo in sdw_compute_master_ports().
Besides, different port could use different lanes and we can't just
add port_bo based on total channels in a manager.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20240617121350.14074-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
For some reason a number of files included the "All rights reserved"
statement. Good old copy-paste made sure this mistake proliferated.
Remove the "All rights reserved" in all Intel-copyright to align with
internal guidance.
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20240617121318.14037-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Now we have a helper so there's no need to open-code.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240528192936.16180-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ACE3 IP used in PantherLake exposes new bitfields in the ACTMCTL
register to better control clocks/delays. These bitfields were
reserved/zero in the ACE2.x IP, to simplify the integration the new
bifields are added unconditionally. The behavior will only be impacted
when the firmware exposes DSD properties to set non-zero values.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20240603070240.5165-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The notion of stream is by construction based on a multi-bus
capability, to allow for aggregation of Peripheral devices or
functions located on different segments. We currently count how many
master_rt contexts are used by a stream, but we don't have the dual
refcount of how many streams are allocated on a given bus. This
refcount will be useful to check if BTP/BRA streams can be allocated.
Note that the stream_refcount is modified in sdw_master_rt_alloc() and
sdw_master_rt_free() which are both called with the bus_lock mutex
held, so there's no need for refcount_ primitives for additional
protection.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20240603065841.4860-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
We have an existing debugfs files to read standard registers
(DP0/SCP/DPn).
This patch provides a more generic interface to ANY set of read/write
contiguous registers in a peripheral device. In follow-up patches,
this interface will be extended to use BRA transfers.
The sequence is to use the following files added under the existing
debugsfs directory for each peripheral device:
command (write 0, read 1)
num_bytes
start_address
firmware_file (only for writes)
read_buffer (only for reads)
Example for a read command - this checks the 6 bytes used for
enumeration.
cd /sys/kernel/debug/soundwire/master-0-0/sdw\:0\:025d\:0711\:01/
echo 1 > command
echo 6 > num_bytes
echo 0x50 > start_address
echo 1 > go
cat read_buffer
address 0x50 val 0x30
address 0x51 val 0x02
address 0x52 val 0x5d
address 0x53 val 0x07
address 0x54 val 0x11
address 0x55 val 0x01
Example with a 2-byte firmware file written in DP0 address 0x22
od -x /lib/firmware/test_firmware
0000000 0a37
0000002
cd /sys/kernel/debug/soundwire/master-0-0/sdw\:0\:025d\:0711\:01/
echo 0 > command
echo 2 > num_bytes
echo 0x22 > start_address
echo "test_firmware" > firmware_file
echo 1 > go
cd /sys/kernel/debug/soundwire/master-0-0/sdw\:0\:025d\:0711\:01/
echo 1 > command
echo 2 > num_bytes
echo 0x22 > start_address
echo 1 > go
cat read_buffer
address 0x22 val 0x37
address 0x23 val 0x0a
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20240603065841.4860-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The documentation for device_get_named_child_node() mentions this
important point:
"
The caller is responsible for calling fwnode_handle_put() on the
returned fwnode pointer.
"
Add fwnode_handle_put() to avoid leaked references.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20240429004935.2400191-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
- cleanup and conversion for soundwire sysfs groups
- intel support for ace2x bits, auxdevice pm improvements
- qcom multi link device support
-----BEGIN PGP SIGNATURE-----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=H/AJ
-----END PGP SIGNATURE-----
Merge tag 'soundwire-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
- cleanup and conversion for soundwire sysfs groups
- intel support for ace2x bits, auxdevice pm improvements
- qcom multi link device support
* tag 'soundwire-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (33 commits)
soundwire: intel_ace2.x: add support for DOAISE property
soundwire: intel_ace2.x: add support for DODSE property
soundwire: intel_ace2x: use DOAIS and DODS settings from firmware
soundwire: intel_ace2x: cleanup DOAIS/DODS settings
soundwire: intel_ace2x: simplify check_wake()
soundwire: intel_ace2x: fix wakeup handling
soundwire: intel_init: resume all devices on exit.
soundwire: intel: export intel_resume_child_device
soundwire: intel_auxdevice: use pm_runtime_resume() instead of pm_request_resume()
ASoC: SOF: Intel: hda: disable SoundWire interrupt later
soundwire: qcom: allow multi-link on newer devices
soundwire: intel_ace2x: use legacy formula for intel_alh_id
soundwire: reconcile dp0_prop and dpn_prop
soundwire: intel_ace2x: set the clock source
soundwire: intel_ace2.x: power-up first before setting SYNCPRD
soundwire: intel_ace2x: move and extend clock selection
soundwire: intel: add support for MeteorLake additional clocks
soundwire: intel: add more values for SYNCPRD
soundwire: bus: extend base clock checks to 96 MHz
soundwire: cadence: show the bus frequency and frame shape
...
Starting with LNL, the recommendation is to use settings read from DSD
properties instead of hard-coding the values.
The DOAIS and DODS values are completely-specific to Intel and are
stored in a vendor-specific property structure.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20240429004321.2399754-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Use two variables to save the settings, in preparation of a follow-up
change to read values from _DSD properties.
Starting with this patch, the bitfields will be reordered and listed
MSB-first, as shown in the hardware documentation.
Also note that the default for DOAIS is changed from 0x1 (copy-pasted
value?) to 0x3 (hardware default).
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20240429004321.2399754-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Since LunarLake, we use the HDadio WAKEEN/WAKESTS to detect wakes for
SoundWire codecs. This patch follows the HDaudio example and
simplifies the behavior on wake-up by unconditionally waking up all
links.
This behavior makes a lot of sense when removing the jack, which may
signal that the user wants to start rendering audio using the local
amplifiers. Resuming all links helps make sure the amplifiers are
ready to be used. Worst case, the pm_runtime suspend would kick-in
after several seconds of inactivity.
Closes: https://github.com/thesofproject/linux/issues/4687
Co-developed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Keqiao Zhang <keqiao.zhang@intel.com>
Link: https://lore.kernel.org/r/20240426064030.2305343-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The initial programming sequence only worked in the case where the
OFLEN bit is set, i.e. the DSP handles the SoundWire interface. In the
Linux integration, the interface is owned by the host. This disconnect
leads to wake-ups being routed to the DSP and not to the host.
The suggested update is to rely on the global HDAudio WAKEEN/STATESTS
registers, with the SDI bits used to program the wakeups and check the
status.
Note that there is no way to know which peripheral generated a
wake-up. When the hardware detects a change, it sets all the bits
corresponding to LSDIIDx. The LSDIIDx information can be used to
figure out on which link the wakeup happened, but for further details
the software will have to check the status of each peripheral.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20240426064030.2305343-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
When the manager becomes pm_runtime active in the remove procedure,
peripherals will become attached, and do the initialization
process. We have to wait until all the devices are fully resumed
before the cleanup, otherwise there is a possible race condition where
asynchronous workqueues initiate transfers on the bus that cannot
complete. This will ensure there are no SoundWire registers accessed
after the bus is powered-down.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20240410023438.487017-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
We need to wait for each child to fully resume. pm_request_resume() is
asynchronous, what we need is to wait synchronously to avoid race
conditions.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20240410023438.487017-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Newer Qualcomm SoCs like X1E80100 might come with four speakers spread
over two Soundwire controllers, thus they need a multi-link Soundwire
stream runtime.
Cc: Mark Brown <broonie@kernel.org>
Cc: alsa-devel@alsa-project.org
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240405144141.47217-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Starting with Lunar Lake, the notion of ALH is mostly irrelevant,
since the HDaudio DMAs are used. However the firmware still relies on
an 'ALH gateway' with a 'node_id' based on the same formula.
This patch in isolation has no functional impact, it's only when the
ASoC parts use it that we will see a changed behavior.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20240408062206.421326-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Insert clock setup after power-up and before setting up the SYNCPRD,
per hardware recommendations.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20240326092030.1062802-8-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The existing sequence is fine if we want to only use the xtal
clock. However if we want to select the clock, we first need to
power-up, then select the clock and last set the SYNCPRD.
This patch first modifies the order, we will add the clock selection
as a follow-up.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20240326092030.1062802-7-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The input clock to the SoundWire IP can be
38.4 MHz (xtal clock source)
24.576 MHz (audio cardinal clock)
96 MHz (internal Audio PLL)
This patch moves the clock selection outside the mutex and add the new
choices for 24.576 and 96 MHz, but doesn't add any functionality.
Follow-up patches will add support for clock selection.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20240326092030.1062802-6-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In the MeteorLake hardware, the SoundWire link clock can be selected
from the Xtal, audio cardinal clock (24.576 MHz) or the 96 MHz audio
PLL.
This patches add the clock selection in a backwards-compatible manner,
using the ACPI firmware as the source of information and checking its
compatibility with hardware capabilities.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20240326092030.1062802-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Starting with MeteorLake, the input frequency to the SoundWire IP can
be 96MHz. The existing code is limited to 24MHz, change accordingly
and move branch after the 32MHz case to avoid issues.
While we're at it, reorder the frequencies by increasing order.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20240326092030.1062802-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This log is useful when trying different configurations, specifically
to make sure ACPI initrd overrides have been taken into account.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20240326092030.1062802-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This offset is set to exactly zero and serves no purpose. Remove.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20240326090122.1051806-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
For some reason, we add an offset to the PDI, presumably to skip the
PDI0 and PDI1 which are reserved for BPT.
This code is however completely wrong and leads to an out-of-bounds
access. We were just lucky so far since we used only a couple of PDIs
and remained within the PDI array bounds.
A Fixes: tag is not provided since there are no known platforms where
the out-of-bounds would be accessed, and the initial code had problems
as well.
A follow-up patch completely removes this useless offset.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20240326090122.1051806-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add the intel_free_stream() callback to deal with the change in IPC that
requires additional steps to be done to clear the gateway node_id.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20240327055215.1097559-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20240307180359.190008-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The SDCA_CASCADE bit is a SoundWire 1.2 addition. It is technically in
the DP0_INT register, but SDCA interrupts shall not be handled as part
of the DP0 interrupt processing.
The existing code has clear comments that we don't want to touch the
SDCA_CASCADE bit, but it's actually cleared due to faulty logic dating
from SoundWire 1.0
In theory clearing this bit should have no effect: a cascade bit
remains set while all ORed status are set, but better safe than sorry.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20240326060021.973501-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
When SoundWire Wake interrupt is enabled along with SoundWire Wake
enable register, SoundWire wake interrupt will be reported
when SoundWire manager is in D3 state and ACP is in D3 state.
When SoundWire Wake interrupt is reported, it will invoke runtime
resume of the SoundWire manager device.
In case of system level suspend, for ClockStop Mode SoundWire Wake
interrupt should be disabled.
It should be enabled only for runtime suspend scenario.
Change wake interrupt enable/disable sequence for ClockStop Mode in
system level suspend and runtime suspend sceanrio.
Fixes: 9cf1efc5ed ("soundwire: amd: add pm_prepare callback and pm ops support")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20240327063143.2266464-2-Vijendar.Mukunda@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Define common inline function for register update.
Use this inline function for updating SoundWire Pad registers
and enable/disable SoundWire interrupt control registers.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20240327063143.2266464-1-Vijendar.Mukunda@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
