This corrects interrupt handling in the stm32 remoteproc driver when
being attached to an already running remote processor.
It fixes invalid kernel-doc and adds missing MODULE_DESCRIPTION() in the
rpmsg char driver.
-----BEGIN PGP SIGNATURE-----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=pogC
-----END PGP SIGNATURE-----
Merge tag 'rpmsg-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull rpmsg updates from Bjorn Andersson:
- fix interrupt handling in the stm32 remoteproc driver when being
attached to an already running remote processor
- fix invalid kernel-doc and add missing MODULE_DESCRIPTION() in the
rpmsg char driver
* tag 'rpmsg-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
rpmsg: char: add missing MODULE_DESCRIPTION() macro
remoteproc: stm32_rproc: Fix mailbox interrupts queuing
rpmsg: char: Fix rpmsg_eptdev structure documentation
The maximum amount of DDR memory used by the Mediatek MT8188/MT8195 SCP
is increased, to handle new use cases. Handling of optional L1TCM memory
is made actually optional.
An optimization is introduced to only clear the unused portion of IPI
shared buffers, rather than the entire buffer before writing the
message.
Detection for IPC-only mode in the TI K3 DSP remoteproc driver is
corrected. The loglevel of a debug print in the same is lowered from
error.
Support for attaching to an running remote processor is added to the
Xilinx R5F.
An in-kernel implementation of the Qualcomm "protected domain mapper"
(aka service registry) service is introduced, to remove the dependency
on a userspace implementation to detect when the battery monitor and USB
Type-C port manager becomes available. This is then integrated with the
Qualcomm remoteproc driver.
The Qualcomm PAS remoteproc driver gains support for attempting to bust
hwspinlocks held by the remote processor when it crashed/stopped.
The TI OMAP remoteproc driver is transitioned to use devres helpers for
various forms of allocations.
Parsing of memory-regions in the i.MX remoteproc driver is improved to
avoid a NULL pointer dereference if the phandle reference is empty.
of_node reference counting is corrected in the same.
-----BEGIN PGP SIGNATURE-----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=b4Do
-----END PGP SIGNATURE-----
Merge tag 'rproc-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
- The maximum amount of DDR memory used by the Mediatek MT8188/MT8195
SCP is increased to handle new use cases. Handling of optional L1TCM
memory is made actually optional.
- An optimization is introduced to only clear the unused portion of IPI
shared buffers, rather than the entire buffer before writing the
message.
- Detection for IPC-only mode in the TI K3 DSP remoteproc driver is
corrected. The loglevel of a debug print in the same is lowered from
error.
- Support for attaching to an running remote processor is added to the
Xilinx R5F.
- An in-kernel implementation of the Qualcomm "protected domain mapper"
(aka service registry) service is introduced, to remove the
dependency on a userspace implementation to detect when the battery
monitor and USB Type-C port manager becomes available. This is then
integrated with the Qualcomm remoteproc driver.
- The Qualcomm PAS remoteproc driver gains support for attempting to
bust hwspinlocks held by the remote processor when it
crashed/stopped.
- The TI OMAP remoteproc driver is transitioned to use devres helpers
for various forms of allocations.
- Parsing of memory-regions in the i.MX remoteproc driver is improved
to avoid a NULL pointer dereference if the phandle reference is
empty. of_node reference counting is corrected in the same.
* tag 'rproc-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
remoteproc: mediatek: Increase MT8188/MT8195 SCP core0 DRAM size
remoteproc: k3-dsp: Fix log levels where appropriate
remoteproc: xlnx: Add attach detach support
remoteproc: qcom: select AUXILIARY_BUS
remoteproc: k3-r5: Fix IPC-only mode detection
remoteproc: mediatek: Don't attempt to remap l1tcm memory if missing
remoteproc: qcom: enable in-kernel PD mapper
dt-bindings: remoteproc: imx_rproc: Add minItems for power-domain
remoteproc: imx_rproc: Fix refcount mistake in imx_rproc_addr_init
remoteproc: omap: Use devm_rproc_add() helper
remoteproc: omap: Use devm action to release reserved memory
remoteproc: omap: Use devm_rproc_alloc() helper
remoteproc: imx_rproc: Skip over memory region when node value is NULL
dt-bindings: remoteproc: k3-dsp: Correct optional sram properties for AM62A SoCs
remoteproc: qcom_q6v5_pas: Add hwspinlock bust on stop
soc: qcom: smem: Add qcom_smem_bust_hwspin_lock_by_host()
remoteproc: mediatek: Zero out only remaining bytes of IPI buffer
Since the original find_vqs() is no longer present, rename
find_vqs_info() back to find_vqs().
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Message-Id: <20240708074814.1739223-10-jiri@resnulli.us>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Convert existing find_vqs() transport implementations
to use find_vqs_info() config op.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Message-Id: <20240708074814.1739223-7-jiri@resnulli.us>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The current DRAM size is insufficient for the HEVC feature, which
requires more memory for proper functionality. This change ensures the
feature has the necessary resources.
Signed-off-by: Jason Chen <Jason-ch.Chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240703034409.698-1-Jason-ch.Chen@mediatek.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Driver was logging information as errors. Changed dev_err to dev_dbg
where appropriate.
Signed-off-by: Garrett Giordano <ggiordano@phytec.com>
Acked-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240626191438.490524-1-ggiordano@phytec.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
It is possible that remote processor is already running before
linux boot or remoteproc platform driver probe. Implement required
remoteproc framework ops to provide resource table address and
connect or disconnect with remote processor in such case.
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
Link: https://lore.kernel.org/r/20240627172936.227439-1-tanmay.shah@amd.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The QCOM_PD_MAPPER implementation made Qualcomm remoteproc drivers use
auxiliary bus for the pd-mapper subdevice. Add necessary dependency.
Reported-by: Mark Brown <broonie@kernel.org>
Fixes: 5b9f51b200 ("remoteproc: qcom: enable in-kernel PD mapper")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Chris Lew <quic_clew@quicinc.com>
Link: https://lore.kernel.org/r/20240626-qcom-pd-mapper-fix-deps-v1-2-644678dc4663@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
ret variable was used to test reset status, get from
reset_control_status() call. But this variable was overwritten by
ti_sci_proc_get_status() a few lines bellow.
And as ti_sci_proc_get_status() returns 0 or a negative value (in this
latter case, followed by a return), the expression !ret was always true,
Clearly, this was not what was intended:
In the comment above it's said that "requires both local and module
resets to be deasserted"; if reset_control_status() returns 0 it means
that the reset line is deasserted.
So, it's pretty clear that the return value of reset_control_status()
was intended to be used instead of ti_sci_proc_get_status() return
value.
This could lead in an incorrect IPC-only mode detection if reset line is
asserted (so reset_control_status() return > 0) and c_state != 0 and
halted == 0.
In this case, the old code would have detected an IPC-only mode instead
of a mismatched mode.
Fixes: 1168af40b1 ("remoteproc: k3-r5: Add support for IPC-only mode for all R5Fs")
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Reviewed-by: Hari Nagalla <hnagalla@ti.com>
Link: https://lore.kernel.org/r/20240621150058.319524-2-richard.genoud@bootlin.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The current code doesn't check whether platform_get_resource_byname()
succeeded to get the l1tcm memory, which is optional, before attempting
to map it. This results in the following error message when it is
missing:
mtk-scp 10500000.scp: error -EINVAL: invalid resource (null)
Add a check so that the remapping is only attempted if the memory region
exists. This also allows to simplify the logic handling failure to
remap, since a failure then is always a failure.
Fixes: ca23ecfdbd ("remoteproc/mediatek: support L1TCM")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240627-scp-invalid-resource-l1tcm-v1-1-7d221e6c495a@collabora.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Request in-kernel protection domain mapper to be started before starting
Qualcomm DSP and release it once DSP is stopped. Once all DSPs are
stopped, the PD mapper will be stopped too.
Reviewed-by: Chris Lew <quic_clew@quicinc.com>
Tested-by: Steev Klimaszewski <steev@kali.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240622-qcom-pd-mapper-v9-5-a84ee3591c8e@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
In imx_rproc_addr_init() strcmp() is performed over the node after the
of_node_put() is performed over it.
Fix this error by moving of_node_put() calls.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 5e4c124307 ("remoteproc: imx_rproc: support remote cores booted before Linux Kernel")
Cc: stable@vger.kernel.org
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Link: https://lore.kernel.org/r/20240612131714.12907-1-amishin@t-argos.ru
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Use the device lifecycle managed add function. This helps prevent mistakes
like deleting out of order in cleanup functions and forgetting to delete
on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240610151721.189472-3-afd@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
This helps prevent mistakes like freeing out of order in cleanup functions
and forgetting to free on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240610151721.189472-2-afd@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Use the device lifecycle managed allocation function. This helps prevent
mistakes like freeing out of order in cleanup functions and forgetting to
free on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240610151721.189472-1-afd@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
In imx_rproc_addr_init() "nph = of_count_phandle_with_args()" just counts
number of phandles. But phandles may be empty. So of_parse_phandle() in
the parsing loop (0 < a < nph) may return NULL which is later dereferenced.
Adjust this issue by adding NULL-return check.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: a0ff4aa6f0 ("remoteproc: imx_rproc: add a NXP/Freescale imx_rproc driver")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240606075204.12354-1-amishin@t-argos.ru
[Fixed title to fit within the prescribed 70-75 charcters]
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
When remoteproc goes down unexpectedly this results in a state where any
acquired hwspinlocks will remain locked possibly resulting in deadlock.
In order to ensure all locks are freed we include a call to
qcom_smem_bust_hwspin_lock_by_host() during remoteproc shutdown.
For qcom_q6v5_pas remoteprocs, each remoteproc has an assigned smem
host_id. Remoteproc can pass this id to smem to try and bust the lock on
remoteproc stop.
This edge case only occurs with q6v5_pas watchdog crashes. The error
fatal case has handling to clear the hwspinlock before the error fatal
interrupt is triggered.
Signed-off-by: Richard Maina <quic_rmaina@quicinc.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Chris Lew <quic_clew@quicinc.com>
Link: https://lore.kernel.org/r/20240529-hwspinlock-bust-v3-4-c8b924ffa5a2@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
In scp_ipi_handler(), instead of zeroing out the entire shared
buffer, which may be as large as 600 bytes, overwrite it with the
received data, then zero out only the remaining bytes.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240520112724.139945-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
In case of errors during core start operation from sysfs, the driver
directly returns with the -EPERM error code. Fix this to ensure that
mailbox channels are freed on error before returning by jumping to the
'put_mbox' error handling label. Similarly, jump to the 'out' error
handling label to return with required -EPERM error code during the
core stop operation from sysfs.
Fixes: 3c8a9066d5 ("remoteproc: k3-r5: Do not allow core1 to power up before core0 via sysfs")
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Link: https://lore.kernel.org/r/20240506141849.1735679-1-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Set the error code to ERR_PTR(-ENOMEM). Otherwise if there is an
allocation failure it leads to a NULL dereference in the caller.
Fixes: c08a824945 ("remoteproc: mediatek: Support setting DRAM and IPI shared buffer sizes")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/b2114e3c-fa64-4edb-a1ff-d2009e544c3f@moroto.mountain
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
PSC controller has a limitation that it can only power-up the second
core when the first core is in ON state. Power-state for core0 should be
equal to or higher than core1.
Therefore, prevent core1 from powering up before core0 during the start
process from sysfs. Similarly, prevent core0 from shutting down before
core1 has been shut down from sysfs.
Fixes: 6dedbd1d54 ("remoteproc: k3-r5: Add a remoteproc driver for R5F subsystem")
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240430105307.1190615-3-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
PSC controller has a limitation that it can only power-up the second core
when the first core is in ON state. Power-state for core0 should be equal
to or higher than core1, else the kernel is seen hanging during rproc
loading.
Make the powering up of cores sequential, by waiting for the current core
to power-up before proceeding to the next core, with a timeout of 2sec.
Add a wait queue event in k3_r5_cluster_rproc_init call, that will wait
for the current core to be released from reset before proceeding with the
next core.
Fixes: 6dedbd1d54 ("remoteproc: k3-r5: Add a remoteproc driver for R5F subsystem")
Signed-off-by: Apurva Nandan <a-nandan@ti.com>
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240430105307.1190615-2-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The SCP on different chips will require different DRAM sizes and IPI
shared buffer sizes based on varying requirements.
Signed-off-by: Olivia Wen <olivia.wen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240430011534.9587-4-olivia.wen@mediatek.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
MT8188 SCP has two RISC-V cores which is similar to MT8195 but without
L1TCM. We've added MT8188-specific functions to configure L1TCM in
multicore setups.
Signed-off-by: Olivia Wen <olivia.wen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240430011534.9587-3-olivia.wen@mediatek.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
AMD-Xilinx Versal platform is successor of ZynqMP platform.
Real-time Processing Unit R5 cluster IP on Versal is same as
of ZynqMP Platform. Power-domains ids for Versal platform is
different than ZynqMP.
AMD-Xilinx Versal-NET platform is successor of Versal platform.
Versal-NET Real-Time Processing Unit has two clusters and each
cluster contains dual core ARM Cortex-R52 processors. Each R52
core is assigned 128KB of TCM memory.
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
Link: https://lore.kernel.org/r/20240418220125.744322-1-tanmay.shah@amd.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
ZynqMP TCM information was fixed in driver. Now ZynqMP TCM information
is available in device-tree. Parse TCM information in driver
as per new bindings.
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
Link: https://lore.kernel.org/r/20240412183708.4036007-5-tanmay.shah@amd.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
In lockstep mode, r5 core0 uses TCM of R5 core1. Following is lockstep
mode memory region as per hardware reference manual.
| *TCM* | *R5 View* | *Linux view* |
| R5_0 ATCM (128 KB) | 0x0000_0000 | 0xFFE0_0000 |
| R5_0 BTCM (128 KB) | 0x0002_0000 | 0xFFE2_0000 |
However, driver shouldn't model it as above because R5 core0 TCM and core1
TCM has different power-domains mapped to it.
Hence, TCM address space in lockstep mode should be modeled as 64KB
regions only where each region has its own power-domain as following:
| *TCM* | *R5 View* | *Linux view* |
| R5_0 ATCM0 (64 KB) | 0x0000_0000 | 0xFFE0_0000 |
| R5_0 BTCM0 (64 KB) | 0x0002_0000 | 0xFFE2_0000 |
| R5_0 ATCM1 (64 KB) | 0x0001_0000 | 0xFFE1_0000 |
| R5_0 BTCM1 (64 KB) | 0x0003_0000 | 0xFFE3_0000 |
This makes driver maintanance easy and makes design robust for future
platorms as well.
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
Link: https://lore.kernel.org/r/20240412183708.4036007-2-tanmay.shah@amd.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Supporting remoteproc coredump requires the platform-specific driver to
register coredump segments to be dumped. Do this by calling
rproc_coredump_add_segment for every carveout.
Also call rproc_coredump_set_elf_info when then rproc is created. If the
ELFCLASS parameter is not provided then coredump fails with an error.
Other drivers seem to pass EM_NONE for the machine argument but for me
this shows a warning in gdb. Pass EM_ARM because this is an ARM R5.
Signed-off-by: Leonard Crestez <cdleonard@gmail.com>
Link: https://lore.kernel.org/r/d4556268-8274-4089-949f-3b97d67793c7@gmail.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The IPI buffer location is read from the firmware that we load to the
System Companion Processor, and it's not granted that both the SRAM
(L2TCM) size that is defined in the devicetree node is large enough
for that, and while this is especially true for multi-core SCP, it's
still useful to check on single-core variants as well.
Failing to perform this check may make this driver perform R/W
operations out of the L2TCM boundary, resulting (at best) in a
kernel panic.
To fix that, check that the IPI buffer fits, otherwise return a
failure and refuse to boot the relevant SCP core (or the SCP at
all, if this is single core).
Fixes: 3efa0ea743 ("remoteproc/mediatek: read IPI buffer offset from FW")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240321084614.45253-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Since commit 43a7206b09 ("driver core: class: make class_register() take
a const *"), the driver core allows for struct class to be in read-only
memory, so move the rproc_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Link: https://lore.kernel.org/r/20240305-class_cleanup-remoteproc2-v1-1-1b139e9828c9@marliere.net
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Qualcomm SM8650 audio, compute and modem remoteproc are added. Qualcomm
X1 Elite audio and compute remoteprocs are added, after support for
shutting down the bootloader-loaded firmware loaded into the audio DSP..
A dozen drivers in the subsystem are transitioned to use devres helpers
for remoteproc and memory allocations.
It makes it possible to acquire in-kernel handle to individual
remoteproc instances in a cluster.
The release of DMA memory for remoteproc virtio is corrected to ensure
that restarting due to a watchdog bite doesn't attempt to allocate the
memory again without first freeing it.
Last, but not least, a couple of DeviceTree binding cleanups.
-----BEGIN PGP SIGNATURE-----
iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmX3oxcVHGFuZGVyc3Nv
bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3FargP/1kVpsEZbzaqc3v0OJBShG45gpQR
O9wIfP0T9KrZGDSayAGX7/c80cvLl3y/ukkwY6ehGLrV2iOQ2+7fhV9vLDe09a95
mMkcE3d3WFrlDPGPjquTRlCFjkBcK/WloQWBQZZ+ZtCxjfUjwKxtPutB7XPCQC4r
Ky3qUUhkxhXSD2R8Vr8PSDtdMxwj991A7Ejo+wRYEzv40atiJ0M3v9/hjNeIinVz
zui6EOB0p9s4geDfD7uAbbDfwi7CxvlprC3AcAYz4KWV1q5Dh8NhYI0KqcF03G8q
pCpJHuHYBBiarAvflKe99KLSiVz7+GOtcz2a4d4YBSbePliW+HafPXugUqBG/RtC
TzH1H4NuS+07JyYlklz/lC3Do284LimSrGlGMR+uypY8sLWRVSHBazTJypGHOUZd
ei/E3Nf7hbEkBh31o4lTMVrVT/zTXKe2gdzAM7dgom6euav8OiUEgpVdc2ye3oHf
0Xmeb8UXAVTCZEfHqgKr3QO3v3wAbarbJ/UZiPHeN/5kFUxbTxpRAmpTeI4ViKk3
KDbqibnx6YI8UHkAPgQalf1x37z2f1b/DEfi3nulzwLsZ0UgvoZy5Zim7RSS/R5K
JFqMNKPj0m2J6LF+2YTjZL6Af989mWmLOLPTM6szpWvEil/ndRTqWaAKOilWeGJu
wqVp6JrREfPhHsWY
=na/C
-----END PGP SIGNATURE-----
Merge tag 'rproc-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
"Qualcomm SM8650 audio, compute and modem remoteproc are added.
Qualcomm X1 Elite audio and compute remoteprocs are added, after
support for shutting down the bootloader-loaded firmware loaded into
the audio DSP..
A dozen drivers in the subsystem are transitioned to use devres
helpers for remoteproc and memory allocations - this makes it possible
to acquire in-kernel handle to individual remoteproc instances in a
cluster.
The release of DMA memory for remoteproc virtio is corrected to ensure
that restarting due to a watchdog bite doesn't attempt to allocate the
memory again without first freeing it.
Last, but not least, a couple of DeviceTree binding cleanups"
* tag 'rproc-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (30 commits)
remoteproc: qcom_q6v5_pas: Unload lite firmware on ADSP
remoteproc: qcom_q6v5_pas: Add support for X1E80100 ADSP/CDSP
dt-bindings: remoteproc: qcom,sm8550-pas: document the X1E80100 aDSP & cDSP
remoteproc: qcom_wcnss: Use devm_rproc_alloc() helper
remoteproc: qcom_q6v5_wcss: Use devm_rproc_alloc() helper
remoteproc: qcom_q6v5_pas: Use devm_rproc_alloc() helper
remoteproc: qcom_q6v5_mss: Use devm_rproc_alloc() helper
remoteproc: qcom_q6v5_adsp: Use devm_rproc_alloc() helper
dt-bindings: remoteproc: do not override firmware-name $ref
dt-bindings: remoteproc: qcom,glink-rpm-edge: drop redundant type from label
remoteproc: qcom: pas: correct data indentation
remoteproc: Make rproc_get_by_phandle() work for clusters
remoteproc: qcom: pas: Add SM8650 remoteproc support
remoteproc: qcom: pas: make region assign more generic
dt-bindings: remoteproc: qcom,sm8550-pas: document the SM8650 PAS
remoteproc: k3-dsp: Use devm_rproc_add() helper
remoteproc: k3-dsp: Use devm_ioremap_wc() helper
remoteproc: k3-dsp: Add devm action to release tsp
remoteproc: k3-dsp: Use devm_kzalloc() helper
remoteproc: k3-dsp: Use devm_ti_sci_get_by_phandle() helper
...
The UEFI loads a lite variant of the ADSP firmware to support charging
use cases. The kernel needs to unload and reload it with the firmware
that has full feature support for audio. This patch arbitarily shutsdown
the lite firmware before loading the full firmware.
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240212-x1e80100-remoteproc-v2-3-604614367f38@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for PIL loading on ADSP and CDSP on X1E80100 SoCs.
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240212-x1e80100-remoteproc-v2-2-604614367f38@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use the device lifecycle managed allocation function. This helps prevent
mistakes like freeing out of order in cleanup functions and forgetting to
free on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123184632.725054-7-afd@ti.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use the device lifecycle managed allocation function. This helps prevent
mistakes like freeing out of order in cleanup functions and forgetting to
free on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123184632.725054-6-afd@ti.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use the device lifecycle managed allocation function. This helps prevent
mistakes like freeing out of order in cleanup functions and forgetting to
free on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123184632.725054-5-afd@ti.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use the device lifecycle managed allocation function. This helps prevent
mistakes like freeing out of order in cleanup functions and forgetting to
free on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123184632.725054-4-afd@ti.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use the device lifecycle managed allocation function. This helps prevent
mistakes like freeing out of order in cleanup functions and forgetting to
free on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123184632.725054-3-afd@ti.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Correct indentation of several struct adsp_data instances to always use
a single TAB character instead of two.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240304-qcom-pd-mapper-v3-4-6858fa1ac1c8@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Let's avoid some of the boilerplate code to manage the various PM domain
cases, by converting into using dev_pm_domain_attach|detach_list().
As a part of the conversion, we are moving over to use device_links, which
simplifies the runtime PM support too. Moreover, while attaching let's
trust that an already attached single PM domain is the correct one.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: <linux-remoteproc@vger.kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20240130123951.236243-5-ulf.hansson@linaro.org
Multi-cluster remoteproc designs typically have the following DT
declaration:
remoteproc-cluster {
compatible = "soc,remoteproc-cluster";
core0: core0 {
compatible = "soc,remoteproc-core"
memory-region;
sram;
};
core1: core1 {
compatible = "soc,remoteproc-core"
memory-region;
sram;
}
};
A driver exists for the cluster rather than the individual cores
themselves so that operation mode and HW specific configurations
applicable to the cluster can be made.
Because the driver exists at the cluster level and not the individual
core level, function rproc_get_by_phandle() fails to return the
remoteproc associated with the phandled it is called for.
This patch enhances rproc_get_by_phandle() by looking for the cluster's
driver when the driver for the immediate remoteproc's parent is not
found.
Reported-by: Ben Levinsky <ben.levinsky@xilinx.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Co-developed-by: Tarak Reddy <tarak.reddy@amd.com>
Signed-off-by: Tarak Reddy <tarak.reddy@amd.com>
Co-developed-by: Tanmay Shah <tanmay.shah@amd.com>
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
Link: https://lore.kernel.org/r/20240130154849.1018666-1-tanmay.shah@amd.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The current memory region assign only supports a single
memory region.
But new platforms introduces more regions to make the
memory requirements more flexible for various use cases.
Those new platforms also shares the memory region between the
DSP and HLOS.
To handle this, make the region assign more generic in order
to support more than a single memory region and also permit
setting the regions permissions as shared.
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240123-topic-sm8650-upstream-remoteproc-v7-2-61283f50162f@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use device lifecycle managed devm_rproc_add() helper function. This helps
prevent mistakes like deleting out of order in cleanup functions and
forgetting to delete on all error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240205182753.36978-6-afd@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Use a device lifecycle managed ioremap helper function. This helps prevent
mistakes like unmapping out of order in cleanup functions and forgetting
to unmap on all error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240205182753.36978-5-afd@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
