There is a race between the CREQ tasklet and destroy qp when accessing the
qp-handle table. There is a chance of reading a valid qp-handle in the
CREQ tasklet handler while the QP is already moving ahead with the
destruction.
Fixing this race by implementing a table-lock to synchronize the access.
Fixes: f218d67ef0 ("RDMA/bnxt_re: Allow posting when QPs are in error")
Fixes: 84cf229f40 ("RDMA/bnxt_re: Fix the qp table indexing")
Link: https://patch.msgid.link/r/1728912975-19346-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Control path completion processing always runs in tasklet context. To
synchronize with the posting thread, there is no need to use the irq
variant of spin lock. Use spin_lock_bh instead.
Fixes: 1ac5a40479 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Link: https://patch.msgid.link/r/1728912975-19346-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
After the cited commit below max_dest_rd_atomic and max_rd_atomic values
are being rounded down to the next power of 2. As opposed to the old
behavior and mlx4 driver where they used to be rounded up instead.
In order to stay consistent with older code and other drivers, revert to
using fls round function which rounds up to the next power of 2.
Fixes: f18e26af6a ("RDMA/mlx5: Convert modify QP to use MLX5_SET macros")
Link: https://patch.msgid.link/r/d85515d6ef21a2fa8ef4c8293dce9b58df8a6297.1728550179.git.leon@kernel.org
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Maher Sanalla <msanalla@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
GID table length is reported by FW. The gid index which is passed to the
driver during modify_qp/create_ah is restricted by the sgid_index field of
struct ib_global_route. sgid_index is u8 and the max sgid possible is
256.
Each GID entry in HW will have 2 GID entries in the kernel gid table. So
we can support twice the gid table size reported by FW. Also, restrict the
max GID to 256 also.
Fixes: 847b97887e ("RDMA/bnxt_re: Restrict the max_gids to 256")
Link: https://patch.msgid.link/r/1728373302-19530-11-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Avoid memory corruption while setting up Level-2 PBL pages for the non MR
resources when num_pages > 256K.
There will be a single PDE page address (contiguous pages in the case of >
PAGE_SIZE), but, current logic assumes multiple pages, leading to invalid
memory access after 256K PBL entries in the PDE.
Fixes: 0c4dcd6028 ("RDMA/bnxt_re: Refactor hardware queue memory allocation")
Link: https://patch.msgid.link/r/1728373302-19530-10-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently the CQ toggle value in the shared page (read by the userlib) is
updated as part of the cqn_handler. There is a potential race of
application calling the CQ ARM doorbell immediately and using the old
toggle value.
Change the sequence of updating CQ toggle value to update in the
bnxt_qplib_service_nq function immediately after reading the toggle value
to be in sync with the HW updated value.
Fixes: e275919d96 ("RDMA/bnxt_re: Share a page to expose per CQ info with userspace")
Link: https://patch.msgid.link/r/1728373302-19530-9-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In bnxt_re_add_device(), when register netdev notifier fails, driver is
not unregistering the IB device in the error cleanup path. Also, removed
the duplicate cleanup in error path of bnxt_re_probe.
Fixes: 94a9dc6ac8 ("RDMA/bnxt_re: Group all operations under add_device and remove_device")
Link: https://patch.msgid.link/r/1728373302-19530-8-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Driver waits indefinitely for the fifo occupancy to go below a threshold
as soon as the pacing interrupt is received. This can cause soft lockup on
one of the processors, if the rate of DB is very high.
Add a loop count for FPGA and exit the __wait_for_fifo_occupancy_below_th
if the loop is taking more time. Pacing will be continuing until the
occupancy is below the threshold. This is ensured by the checks in
bnxt_re_pacing_timer_exp and further scheduling the work for pacing based
on the fifo occupancy.
Fixes: 2ad4e6303a ("RDMA/bnxt_re: Implement doorbell pacing algorithm")
Link: https://patch.msgid.link/r/1728373302-19530-7-git-send-email-selvin.xavier@broadcom.com
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When the HWRM command fails, driver currently returns -EFAULT(Bad
address). This does not look correct.
Modified to return -EIO(I/O error).
Fixes: cc1ec769b8 ("RDMA/bnxt_re: Fixing the Control path command and response handling")
Fixes: 65288a22dd ("RDMA/bnxt_re: use shadow qd while posting non blocking rcfw command")
Link: https://patch.msgid.link/r/1728373302-19530-5-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently driver is not getting correct srq. Dereference only if qplib has
a valid srq.
Fixes: b02fd3f79e ("RDMA/bnxt_re: Report async events and errors")
Link: https://patch.msgid.link/r/1728373302-19530-4-git-send-email-selvin.xavier@broadcom.com
Reviewed-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Reviewed-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Driver exports pacing stats only on GenP5 and P7 adapters. But while
parsing the pacing stats, driver has a check for "rdev->dbr_pacing". This
caused a trace when KASAN is enabled.
BUG: KASAN: slab-out-of-bounds in bnxt_re_get_hw_stats+0x2b6a/0x2e00 [bnxt_re]
Write of size 8 at addr ffff8885942a6340 by task modprobe/4809
Fixes: 8b6573ff34 ("bnxt_re: Update the debug counters for doorbell pacing")
Link: https://patch.msgid.link/r/1728373302-19530-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Older adapters doesn't support the MAX CQ WQEs reported by older FW. So
restrict the value reported to 1M always for older adapters.
Fixes: 1ac5a40479 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Link: https://patch.msgid.link/r/1728373302-19530-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Abhishek Mohapatra<abhishek.mohapatra@broadcom.com>
Reviewed-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Since commit 4c39529663 ("slab: Warn on duplicate cache names when
DEBUG_VM=y"), slab complains about duplicate cache names. Hence this
patch. The approach is as follows:
- Maintain an xarray with the slab size as index and a reference count
and a kmem_cache pointer as contents. Use srpt-${slab_size} as kmem
cache name.
- Use 512-byte alignment for all slabs instead of only for some of the
slabs.
- Increment the reference count instead of calling kmem_cache_create().
- Decrement the reference count instead of calling kmem_cache_destroy().
Fixes: 5dabcd0456 ("RDMA/srpt: Add support for immediate data")
Link: https://patch.msgid.link/r/20241009210048.4122518-1-bvanassche@acm.org
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Closes: https://lore.kernel.org/linux-block/xpe6bea7rakpyoyfvspvin2dsozjmjtjktpph7rep3h25tv7fb@ooz4cu5z6bq6/
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
There is "accept*" misspelled as "accpet*" in the comments. Fix the
spelling.
Fixes: 146b9756f1 ("RDMA/irdma: Add connection manager")
Link: https://patch.msgid.link/r/20241008161913.19965-1-green@qrator.net
Signed-off-by: Alexander Zubkov <green@qrator.net>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
ip_dev_find() always returns real net_device address, whether traffic is
running on a vlan or real device, if traffic is over vlan, filling
endpoint struture with real ndev and an attempt to send a connect request
will results in RDMA_CM_EVENT_UNREACHABLE error. This patch fixes the
issue by using vlan_dev_real_dev().
Fixes: 830662f6f0 ("RDMA/cxgb4: Add support for active and passive open connection with IPv6 address")
Link: https://patch.msgid.link/r/20241007132311.70593-1-anumula@chelsio.com
Signed-off-by: Anumula Murali Mohan Reddy <anumula@chelsio.com>
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
While running ISER over SIW, the initiator machine encounters a warning
from skb_splice_from_iter() indicating that a slab page is being used in
send_page. To address this, it is better to add a sendpage_ok() check
within the driver itself, and if it returns 0, then MSG_SPLICE_PAGES flag
should be disabled before entering the network stack.
A similar issue has been discussed for NVMe in this thread:
https://lore.kernel.org/all/20240530142417.146696-1-ofir.gal@volumez.com/
WARNING: CPU: 0 PID: 5342 at net/core/skbuff.c:7140 skb_splice_from_iter+0x173/0x320
Call Trace:
tcp_sendmsg_locked+0x368/0xe40
siw_tx_hdt+0x695/0xa40 [siw]
siw_qp_sq_process+0x102/0xb00 [siw]
siw_sq_resume+0x39/0x110 [siw]
siw_run_sq+0x74/0x160 [siw]
kthread+0xd2/0x100
ret_from_fork+0x34/0x40
ret_from_fork_asm+0x1a/0x30
Link: https://patch.msgid.link/r/20241007125835.89942-1-showrya@chelsio.com
Signed-off-by: Showrya M N <showrya@chelsio.com>
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
If traffic is over vlan, cma_validate_port() fails to match vlan
net_device ifindex with bound_if_index and results in ENODEV error.
It is because rdma_copy_src_l2_addr() always assigns bound_if_index with
real net_device ifindex.
This patch fixes the issue by assigning bound_if_index with vlan
net_device index if traffic is over vlan.
Fixes: f8ef1be816 ("RDMA/cma: Avoid GID lookups on iWARP devices")
Signed-off-by: Anumula Murali Mohan Reddy <anumula@chelsio.com>
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Link: https://patch.msgid.link/20241008114334.146702-1-anumula@chelsio.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
nlmsg_put() may return a NULL pointer assigned to nlh, which will later
be dereferenced in nlmsg_end().
Fixes: 9cbed5aab5 ("RDMA/nldev: Add support for RDMA monitoring")
Link: https://patch.msgid.link/r/Zva71Yf3F94uxi5A@iZbp1asjb3cy8ks0srf007Z
Signed-off-by: Qianqiang Liu <qianqiang.liu@163.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
max_sw_wqe used for static wqe mode should be same as the max_wqe.
Calculate the max_sw_wqe only for the variable WQE mode.
Fixes: de1d364c38 ("RDMA/bnxt_re: Add support for Variable WQE in Genp7 adapters")
Link: https://patch.msgid.link/r/1726715161-18941-7-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
__alloc_pbl() can return error when memory allocation fails.
Driver is not checking the status on one of the instances.
Fixes: 0c4dcd6028 ("RDMA/bnxt_re: Refactor hardware queue memory allocation")
Link: https://patch.msgid.link/r/1726715161-18941-4-git-send-email-selvin.xavier@broadcom.com
Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Driver uses internal data structure to construct WQE frame.
It used avid type as u16 which can accommodate up to 64K AVs.
When outstanding AVID crosses 64K, driver truncates AVID and
hence it uses incorrect AVID to WR. This leads to WR failure
due to invalid AV ID and QP is moved to error state with reason
set to 19 (INVALID AVID). When RDMA CM path is used, this issue
hits QP1 and it is moved to error state
Fixes: 1ac5a40479 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Link: https://patch.msgid.link/r/1726715161-18941-3-git-send-email-selvin.xavier@broadcom.com
Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Signed-off-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
In bnxt_re_setup_chip_ctx() when bnxt_qplib_map_db_bar() fails
driver is not freeing the memory allocated for "rdev->chip_ctx".
Fixes: 0ac20faf5d ("RDMA/bnxt_re: Reorg the bar mapping")
Link: https://patch.msgid.link/r/1726715161-18941-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
no_llseek had been defined to NULL two years ago, in commit 868941b144
("fs: remove no_llseek")
To quote that commit,
At -rc1 we'll need do a mechanical removal of no_llseek -
git grep -l -w no_llseek | grep -v porting.rst | while read i; do
sed -i '/\<no_llseek\>/d' $i
done
would do it.
Unfortunately, that hadn't been done. Linus, could you do that now, so
that we could finally put that thing to rest? All instances are of the
form
.llseek = no_llseek,
so it's obviously safe.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Usual collection of small improvements and fixes:
- Bug fixes and minor improvments in cxgb4, siw, mlx5, rxe, efa, rts, hfi,
erdma, hns, irdma
- Code cleanups/typos/etc. Tidy alloc_ordered_workqueue() calls
- Multipath PCI for mlx5
- Variable size work queue, SRQ changes, and relaxed ordering for new bnxt HW
- New ODP fault resolution FW protocol in mlx5
- New "rdma monitor" netlink mechanism
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZvGZowAKCRCFwuHvBreF
YcvbAP9abSxZte3zzG1ZJ/6BShSCGJvu4RMMMQI6wNJWZZiJ5wEA18MdaWzGFS8O
BzP48Z/0VGsd2MOfNX4JeyYIs7SNYQA=
=FXLo
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"Usual collection of small improvements and fixes, nothing especially
stands out to me here.
The new multipath PCI feature is a sign of things to come, I think we
will see more of this in the next 10 years. Broadcom and HNS continue
to update their drivers for their new HW generations.
Summary:
- Bug fixes and minor improvments in cxgb4, siw, mlx5, rxe, efa, rts,
hfi, erdma, hns, irdma
- Code cleanups/typos/etc. Tidy alloc_ordered_workqueue() calls
- Multipath PCI for mlx5
- Variable size work queue, SRQ changes, and relaxed ordering for new
bnxt HW
- New ODP fault resolution FW protocol in mlx5
- New 'rdma monitor' netlink mechanism"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (99 commits)
RDMA/bnxt_re: Remove the unused variable en_dev
RDMA/nldev: Add missing break in rdma_nl_notify_err_msg()
RDMA/irdma: fix error message in irdma_modify_qp_roce()
RDMA/cxgb4: Added NULL check for lookup_atid
RDMA/hns: Fix ah error counter in sw stat not increasing
RDMA/bnxt_re: Recover the device when FW error is detected
RDMA/bnxt_re: Group all operations under add_device and remove_device
RDMA/bnxt_re: Use the aux device for L2 ULP callbacks
RDMA/bnxt_re: Change aux driver data to en_info to hold more information
RDMA/nldev: Expose whether RDMA monitoring is supported
RDMA/nldev: Add support for RDMA monitoring
RDMA/mlx5: Use IB set_netdev and get_netdev functions
RDMA/device: Remove optimization in ib_device_get_netdev()
RDMA/mlx5: Initialize phys_port_cnt earlier in RDMA device creation
RDMA/mlx5: Obtain upper net device only when needed
RDMA/mlx5: Check RoCE LAG status before getting netdev
RDMA/mlx5: Consider the query_vuid cap for data_direct
net/mlx5: Handle memory scheme ODP capabilities
RDMA/mlx5: Add implicit MR handling to ODP memory scheme
RDMA/mlx5: Add handling for memory scheme page fault events
...
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZvDNmgAKCRBZ7Krx/gZQ
63zrAP9vI0rf55v27twiabe9LnI7aSx5ckoqXxFIFxyT3dOYpQD/bPmoApnWDD3d
592+iDgLsema/H/0/CqfqlaNtDNY8Q0=
=HUl5
-----END PGP SIGNATURE-----
Merge tag 'pull-stable-struct_fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull 'struct fd' updates from Al Viro:
"Just the 'struct fd' layout change, with conversion to accessor
helpers"
* tag 'pull-stable-struct_fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
add struct fd constructors, get rid of __to_fd()
struct fd: representation change
introduce fd_file(), convert all accessors to it.
Clang warns (or errors with CONFIG_WERROR=y):
drivers/infiniband/core/nldev.c:2795:2: error: unannotated fall-through between switch labels [-Werror,-Wimplicit-fallthrough]
2795 | default:
| ^
Clang is a little more pedantic than GCC, which does not warn when
falling through to a case that is just break or return. Clang's version
is more in line with the kernel's own stance in deprecated.rst, which
states that all switch/case blocks must end in either break,
fallthrough, continue, goto, or return. Add the missing break to silence
the warning.
Fixes: 9cbed5aab5 ("RDMA/nldev: Add support for RDMA monitoring")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20240916-rdma-fix-clang-fallthrough-nl_notify_err_msg-v1-1-89de6a7423f1@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The lookup_atid() function can return NULL if the ATID is
invalid or does not exist in the identifier table, which
could lead to dereferencing a null pointer without a
check in the `act_establish()` and `act_open_rpl()` functions.
Add a NULL check to prevent null pointer dereferencing.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: cfdda9d764 ("RDMA/cxgb4: Add driver for Chelsio T4 RNIC")
Signed-off-by: Mikhail Lobanov <m.lobanov@rosalinux.ru>
Link: https://patch.msgid.link/20240912145844.77516-1-m.lobanov@rosalinux.ru
Signed-off-by: Leon Romanovsky <leon@kernel.org>
There are several error cases where hns_roce_create_ah() returns
directly without jumping to sw stat path, thus leading to a problem
that the ah error counter does not increase.
Fixes: ee20cc17e9 ("RDMA/hns: Support DSCP")
Fixes: eb7854d63d ("RDMA/hns: Support SW stats with debugfs")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20240912115700.2016443-1-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
If the FW crashes, L2 driver gets notified and it notifies
the RoCE driver. Currently driver doesn't re-initialize the
device. Add support for re-initialize the RoCE device.
RoCE device is removed and re-attached in the ulp_stop and
ulp_start respectively. The recovery logic expects the RoCE
driver to be registered with L2 driver while its being removed.
So the driver avoids unregistering with L2 driver in the
recovery path.
Signed-off-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1726027710-2292-5-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Adding and removing device need to be handled from multiple contexts
when Firmware error recovery is supported. So group all the add and remove
operations to add_device and remove_device function.
Signed-off-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1726027710-2292-4-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
While registering with the L2 for ULP operations, use the
aux device pointer as the handle. Aux device has
the data bnxt_re_en_dev_info, which is used to
store required information for the bnxt_re_suspend
and bnxt_re_resume functions.
Signed-off-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1726027710-2292-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
rdev will be destroyed and recreated during the FW error
recovery scenarios. So to keep the state, if any, use an
en_info structure which gets created/freed based on auxiliary
device initialization/de-initialization.
Signed-off-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Reviewed-by: Kashyap Desai <kashyap.desai@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1726027710-2292-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Extend the "rdma sys" command to display whether RDMA
monitoring is supported.
RDMA monitoring is not supported in mlx4 because it does
not use the ib_device_set_netdev() API, which sends the
RDMA events.
Example output for kernel where monitoring is supported:
$ rdma sys show
netns shared privileged-qkey off monitor on copy-on-fork on
Example output for kernel where monitoring is not supported:
$ rdma sys show
netns shared privileged-qkey off monitor off copy-on-fork on
Signed-off-by: Chiara Meiohas <cmeiohas@nvidia.com>
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/20240909173025.30422-8-michaelgur@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Introduce a new netlink command to allow rdma event monitoring.
The rdma events supported now are IB device
registration/unregistration and net device attachment/detachment.
Example output of rdma monitor and the commands which trigger
the events:
$ rdma monitor
$ rmmod mlx5_ib
[UNREGISTER] dev 1 rocep8s0f1
[UNREGISTER] dev 0 rocep8s0f0
$ modprobe mlx5_ib
[REGISTER] dev 2 mlx5_0
[NETDEV_ATTACH] dev 2 mlx5_0 port 1 netdev 4 eth2
[REGISTER] dev 3 mlx5_1
[NETDEV_ATTACH] dev 3 mlx5_1 port 1 netdev 5 eth3
$ devlink dev eswitch set pci/0000:08:00.0 mode switchdev
[UNREGISTER] dev 2 rocep8s0f0
[REGISTER] dev 4 mlx5_0
[NETDEV_ATTACH] dev 4 mlx5_0 port 30 netdev 4 eth2
$ echo 4 > /sys/class/net/eth2/device/sriov_numvfs
[NETDEV_ATTACH] dev 4 rdmap8s0f0 port 2 netdev 7 eth4
[NETDEV_ATTACH] dev 4 rdmap8s0f0 port 3 netdev 8 eth5
[NETDEV_ATTACH] dev 4 rdmap8s0f0 port 4 netdev 9 eth6
[NETDEV_ATTACH] dev 4 rdmap8s0f0 port 5 netdev 10 eth7
[REGISTER] dev 5 mlx5_0
[NETDEV_ATTACH] dev 5 mlx5_0 port 1 netdev 11 eth8
[REGISTER] dev 6 mlx5_0
[NETDEV_ATTACH] dev 6 mlx5_0 port 1 netdev 12 eth9
[REGISTER] dev 7 mlx5_0
[NETDEV_ATTACH] dev 7 mlx5_0 port 1 netdev 13 eth10
[REGISTER] dev 8 mlx5_0
[NETDEV_ATTACH] dev 8 mlx5_0 port 1 netdev 14 eth11
$ echo 0 > /sys/class/net/eth2/device/sriov_numvfs
[UNREGISTER] dev 5 rocep8s0f0v0
[UNREGISTER] dev 6 rocep8s0f0v1
[UNREGISTER] dev 7 rocep8s0f0v2
[UNREGISTER] dev 8 rocep8s0f0v3
[NETDEV_DETACH] dev 4 rdmap8s0f0 port 2
[NETDEV_DETACH] dev 4 rdmap8s0f0 port 3
[NETDEV_DETACH] dev 4 rdmap8s0f0 port 4
[NETDEV_DETACH] dev 4 rdmap8s0f0 port 5
Signed-off-by: Chiara Meiohas <cmeiohas@nvidia.com>
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/20240909173025.30422-7-michaelgur@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The IB layer provides a common interface to store and get net
devices associated to an IB device port (ib_device_set_netdev()
and ib_device_get_netdev()).
Previously, mlx5_ib stored and managed the associated net devices
internally.
Replace internal net device management in mlx5_ib with
ib_device_set_netdev() when attaching/detaching a net device and
ib_device_get_netdev() when retrieving the net device.
Export ib_device_get_netdev().
For mlx5 representors/PFs/VFs and lag creation we replace the netdev
assignments with the IB set/get netdev functions.
In active-backup mode lag the active slave net device is stored in the
lag itself. To assure the net device stored in a lag bond IB device is
the active slave we implement the following:
- mlx5_core: when modifying the slave of a bond we send the internal driver event
MLX5_DRIVER_EVENT_ACTIVE_BACKUP_LAG_CHANGE_LOWERSTATE.
- mlx5_ib: when catching the event call ib_device_set_netdev()
This patch also ensures the correct IB events are sent in switchdev lag.
While at it, when in multiport eswitch mode, only a single IB device is
created for all ports. The said IB device will receive all netdev events
of its VFs once loaded, thus to avoid overwriting the mapping of PF IB
device to PF netdev, ignore NETDEV_REGISTER events if the ib device has
already been mapped to a netdev.
Signed-off-by: Chiara Meiohas <cmeiohas@nvidia.com>
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/20240909173025.30422-6-michaelgur@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The caller of ib_device_get_netdev() relies on its result to accurately
match a given netdev with the ib device associated netdev.
ib_device_get_netdev returns NULL when the IB device associated
netdev is unregistering, preventing the caller of matching netdevs properly.
Thus, remove this optimization and return the netdev even if
it is undergoing unregistration, allowing matching by the caller.
This change ensures proper netdev matching and reference count handling
by the caller of ib_device_get_netdev/ib_device_set_netdev API.
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Signed-off-by: Chiara Meiohas <cmeiohas@nvidia.com>
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/20240909173025.30422-5-michaelgur@nvidia.com
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
phys_port_cnt of the IB device must be initialized before calling
ib_device_set_netdev().
Previously, phys_port_cnt was initialized in the mlx5_ib init function.
Remove this initialization to allow setting it separately, providing
the flexibility to call ib_device_set_netdev before registering the
IB device.
Signed-off-by: Chiara Meiohas <cmeiohas@nvidia.com>
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/20240909173025.30422-4-michaelgur@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Report the upper device's state as the RDMA port state only in RoCE LAG or
switchdev LAG.
Fixes: 27f9e0ccb6 ("net/mlx5: Lag, Add single RDMA device in multiport mode")
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/20240909173025.30422-3-michaelgur@nvidia.com
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Check if RoCE LAG is active before calling the LAG layer for netdev.
This clarifies if LAG is active. No behavior changes with this patch.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/20240909173025.30422-2-michaelgur@nvidia.com
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Consider also the query_vuid cap before enabling the data_direct
functionality.
This may prevent a syndrome from the FW in case the query_vuid command
is not supported. (e.g. migratable VF)
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Gal Shalom <galshalom@nvidia.com>
Link: https://patch.msgid.link/274c4f6f1ac0b1078243dd296695a49dbe58e7d1.1725907637.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Implicit MRs in ODP memory scheme require allocating a private null mkey
and assigning the mkey and va differently in the KSM mkey.
The page faults are received on the null mkey so we also add storing the
null mkey in the odp_mkey xarray.
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/20240909100504.29797-8-michaelgur@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The memory scheme page fault event is a new approch in handling page fault
on mkeys using the on-demand-paging feature.
The major shift in handling the page fault in this scheme is that the HW
is taking responsibilty for parsing the faulted mkey instead of the
previous approach where the driver would read and parse the wqes and
query the mkeys to get to the direct mkey that we need to handle.
Therefore, the event we get from FW in this scheme will contain the
direct mkey and address we need to handle and require much less work
from driver.
Additionally, to optimize performance, the FW can generate the event on
a memory area that is larger than the faulted memory operation is
requiring, to 'prefetch' memory that is around it and will likely be
used soon.
Unlike previous types of page fault, the memory page scheme fault does
not always require a resume command after handling the page fault as the FW
can post multiple events on same mkey and will set the 'last' flag only on
the page fault that requires the resume command.
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/20240909100504.29797-7-michaelgur@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Split the search for the ODP mkey when handling an rdma type page fault to
a helper function, later to be used in other page fault types.
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/20240909100504.29797-6-michaelgur@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The new memory scheme page faults are requesting the driver to fetch
additinal pages to the faulted memory access.
This is done in order to prefetch pages before and after the area that
got the page fault, assuming this will reduce the total amount of page
faults.
The driver should ensure it handles only the pages that are within the
umem range.
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/20240909100504.29797-5-michaelgur@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Add new fields to support the new memory scheme page fault and extend
the token field to u64 as in the new scheme the token is 48 bit.
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/20240909100504.29797-4-michaelgur@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Expose IFC bits to support the new memory scheme on demand paging.
Change the macro reading odp capabilities to be able to read from the
new IFC layout and align the code in upper layers to be compiled.
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/20240909100504.29797-3-michaelgur@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
