The ADP5585 is a 10/11 input/output port expander with a built in keypad
matrix decoder, programmable logic, reset generator, and PWM generator.
This driver supports the GPIO function using the platform device
registered by the core MFD driver.
The driver is derived from an initial implementation from NXP, available
in commit 451f61b46b76 ("MLK-25917-2 gpio: adp5585-gpio: add
adp5585-gpio support") in their BSP kernel tree. It has been extensively
rewritten.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Co-developed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240722121100.2855-4-laurent.pinchart@ideasonboard.com
Signed-off-by: Lee Jones <lee@kernel.org>
The GPIO subsystem used to have a serious problem with undefined behavior
and use-after-free bugs on hot-unplug of GPIO chips. This can be
considered a corner-case by some as most GPIO controllers are enabled
early in the boot process and live until the system goes down but most
GPIO drivers do allow unbind over sysfs, many are loadable modules that
can be (force) unloaded and there are also GPIO devices that can be
dynamically detached, for instance CP2112 which is a USB GPIO expender.
Bugs can be triggered both from user-space as well as by in-kernel users.
We have the means of testing it from user-space via the character device
but the issues manifest themselves differently in the kernel.
This is a proposition of adding a new virtual driver - a configurable
GPIO consumer that can be configured over configfs (similarly to
gpio-sim) or described on the device-tree.
This driver is aimed as a helper in spotting any regressions in
hot-unplug handling in GPIOLIB.
Link: https://lore.kernel.org/r/20240708142912.120570-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This is a sloppy logic analyzer using GPIOs. It comes with a script to
isolate a CPU for polling. While this is definitely not a production
level analyzer, it can be a helpful first view when remote debugging.
Read the documentation for details.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240620094159.6785-2-wsa+renesas@sang-engineering.com
[Bartosz: moved the Kconfig entry into a different category]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This driver provides a basic GPIO driver for the Intel Granite Rapids-D
virtual GPIOs. On SoCs with limited physical pins on the package, the
physical pins controlled by this driver would be exposed on an external
device such as a BMC or CPLD. The virtual GPIO registers are an
interface to firmware, which communicates with the external device that
implements the GPIO hardware functionality.
Signed-off-by: Aapo Vienamo <aapo.vienamo@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
No core changes this time around.
New drivers:
- New driver for Renesas R8A779H0 also known as R-Car V4M.
- New driver for the Awinic AW9523/B I2C GPIO expander.
I found this living out-of-tree in OpenWrt as an upstream
attempt had stalled on the finishing line, so I picked it
up and finished the job.
Improvements:
- The Nomadik pin control driver was for years re-used out of
tree for the ST STA chips, and now the IP was re-used in a
MIPS automotive SoC called MobilEyeq5, so it has been split
in pin control and GPIO drivers so the latter can be reused
by MobilEyeq5. (Along with a long list of cleanups.)
- A lot of overall cleanup and tidying up.
-----BEGIN PGP SIGNATURE-----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=Pt9Y
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"No core changes this time around.
New drivers:
- New driver for Renesas R8A779H0 also known as R-Car V4M.
- New driver for the Awinic AW9523/B I2C GPIO expander. I found this
living out-of-tree in OpenWrt as an upstream attempt had stalled on
the finishing line, so I picked it up and finished the job.
Improvements:
- The Nomadik pin control driver was for years re-used out of tree
for the ST STA chips, and now the IP was re-used in a MIPS
automotive SoC called MobilEyeq5, so it has been split in pin
control and GPIO drivers so the latter can be reused by MobilEyeq5.
(Along with a long list of cleanups)
- A lot of overall cleanup and tidying up"
* tag 'pinctrl-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (87 commits)
drivers/gpio/nomadik: move dummy nmk_gpio_dbg_show_one() to header
gpio: nomadik: remove BUG_ON() in nmk_gpio_populate_chip()
dt-bindings: pinctrl: qcom: update compatible name for match with driver
pinctrl: aw9523: Make the driver tristate
pinctrl: nomadik: fix dereference of error pointer
gpio: nomadik: Back out some managed resources
pinctrl: aw9523: Add proper terminator
pinctrl: core: comment that pinctrl_add_gpio_range() is deprecated
pinctrl: pinmux: Suppress error message for -EPROBE_DEFER
pinctrl: Add driver for Awinic AW9523/B I2C GPIO Expander
dt-bindings: pinctrl: Add bindings for Awinic AW9523/AW9523B
gpio: nomadik: Finish conversion to use firmware node APIs
gpio: nomadik: fix Kconfig dependencies inbetween pinctrl & GPIO
pinctrl: da9062: Add OF table
dt-bindings: pinctrl: at91: add sam9x7
pinctrl: ocelot: remove redundant assignment to variable ret
gpio: nomadik: grab optional reset control and deassert it at probe
gpio: nomadik: support mobileye,eyeq5-gpio
gpio: nomadik: handle variadic GPIO count
gpio: nomadik: support shared GPIO IRQs
...
Previously, drivers/pinctrl/nomadik/pinctrl-nomadik.c registered two
platform drivers: pinctrl & GPIO. Move the GPIO aspect to the
drivers/gpio/ folder, as would be expected.
Both drivers are intertwined for a reason; pinctrl requires access to
GPIO registers for pinmuxing, pull-disable, disabling interrupts while
setting the muxing and wakeup control. Information sharing is done
through a shared array containing GPIO chips and a few helper
functions. That shared array is not touched from gpio-nomadik when
CONFIG_PINCTRL_NOMADIK is not defined.
Make no change to the code that moved into gpio-nomadik; there should be
no behavior change following. A few functions are shared and header
comments are added. Checkpatch warnings are addressed. NUM_BANKS is
renamed to NMK_MAX_BANKS.
It is supported to compile gpio-nomadik without pinctrl-nomadik. The
opposite is not true.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-6-3ba757474006@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The ChromeOS embedded controller (EC) supports setting the state of
GPIOs when the system is unlocked, and getting the state of GPIOs in all
cases. The GPIOs are on the EC itself, so the EC acts similar to a GPIO
expander. Add a driver to get and set the GPIOs on the EC through the
host command interface.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add Nuvoton BMC NPCM7xx/NPCM8xx sgpio driver support.
Nuvoton NPCM SGPIO module is combine serial to parallel IC (HC595)
and parallel to serial IC (HC165), and use APB3 clock to control it.
This interface has 4 pins (D_out , D_in, S_CLK, LDSH).
BMC can use this driver to increase 64 GPI pins and 64 GPO pins to use.
Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The DS4520 is a 9-bit nonvolatile (NV) I/O expander.
It offers users a digitally programmable alternative
to hardware jumpers and mechanical switches that are
being used to control digital logic node.
Signed-off-by: Okan Sahin <okan.sahin@analog.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add support for the BlueField-3 SoC GPIO driver.
This driver configures and handles GPIO interrupts. It also enables a user
to manipulate certain GPIO pins via libgpiod tools or other kernel drivers.
The usables pins are defined via the "gpio-reserved-ranges" property.
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Now that GPIO aggregator supports a delay line, drop the duplicative
functionality, i.e. the entire gpio-delay driver.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add support for TPS65219 PMICs GPIO interface.
3 GPIO pins:
- GPIO0 only is IO but input mode reserved for MULTI_DEVICE_ENABLE usage.
- GPIO1 and GPIO2 are Output only and referred as GPO1 and GPO2 in spec.
GPIO0 is statically configured as input or output prior to Linux boot.
it is used for MULTI_DEVICE_ENABLE function.
This setting is statically configured by NVM.
GPIO0 can't be used as a generic GPIO (specification Table 8-34).
It's either a GPO when MULTI_DEVICE_EN=0 or a GPI when MULTI_DEVICE_EN=1.
Datasheet describes specific usage for non standard GPIO.
Datasheet: https://www.ti.com/lit/ds/symlink/tps65219.pdf
Co-developed-by: Jonathan Cormier <jcormier@criticallink.com>
Signed-off-by: Jonathan Cormier <jcormier@criticallink.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jerome Neanne <jneanne@baylibre.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This driver implements a GPIO enable/disable delay. It supports a list
of GPIO outputs, which ramp-up/ramp-down delay can be specified at
consumer location.
The main purpose is to address external, passive delays upon line
voltage changes.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
- Add support for Renesas RZ/G2L MTU3
- New Device Support
- Add support for Lenovo Yoga Book X90F to Intel CHT WC
- Add support for MAX5970 and MAX5978 to Simple MFD (I2C)
- Add support for Meteor Lake PCH-S LPSS PCI to Intel LPSS PCI
- Add support for AXP15060 PMIC to X-Powers PMIC collection
- Remove Device Support
- Remove support for Samsung 5M8751 and S5M8763 PMIC devices
- New Functionality
- Convert deprecated QCOM IRQ Chip to config registers
- Add support for 32-bit address spaces to Renesas SMUs
- Fix-ups
- Make use of APIs / MACROs designed to simplify and demystify
- Add / improve Device Tree bindings
- Memory saving struct layout optimisations
- Remove old / deprecated functionality
- Factor out unassigned register addresses from ranges
- Trivial: Spelling fixes, renames and coding style fixes
- Rid 'defined but not used' warnings
- Remove ineffective casts and pointer stubs
- Bug Fixes
- Fix incorrectly non-inverted mask/unmask IRQs on QCOM platforms
- Remove MODULE_*() helpers from non-tristate drivers
- Do not attempt to use out-of-range memory addresses associated with io_base
- Provide missing export helpers
- Fix remap bulk read optimisation fallout
- Fix memory leak issues in error paths
-----BEGIN PGP SIGNATURE-----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=EBtX
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Drivers:
- Add support for Renesas RZ/G2L MTU3
New Device Support:
- Add support for Lenovo Yoga Book X90F to Intel CHT WC
- Add support for MAX5970 and MAX5978 to Simple MFD (I2C)
- Add support for Meteor Lake PCH-S LPSS PCI to Intel LPSS PCI
- Add support for AXP15060 PMIC to X-Powers PMIC collection
Remove Device Support:
- Remove support for Samsung 5M8751 and S5M8763 PMIC devices
New Functionality:
- Convert deprecated QCOM IRQ Chip to config registers
- Add support for 32-bit address spaces to Renesas SMUs
Fix-ups:
- Make use of APIs / MACROs designed to simplify and demystify
- Add / improve Device Tree bindings
- Memory saving struct layout optimisations
- Remove old / deprecated functionality
- Factor out unassigned register addresses from ranges
- Trivial: Spelling fixes, renames and coding style fixes
- Rid 'defined but not used' warnings
- Remove ineffective casts and pointer stubs
Bug Fixes:
- Fix incorrectly non-inverted mask/unmask IRQs on QCOM platforms
- Remove MODULE_*() helpers from non-tristate drivers
- Do not attempt to use out-of-range memory addresses associated with io_base
- Provide missing export helpers
- Fix remap bulk read optimisation fallout
- Fix memory leak issues in error paths"
* tag 'mfd-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (88 commits)
dt-bindings: mfd: ti,j721e-system-controller: Add SoC chip ID
leds: bd2606mvv: Driver for the Rohm 6 Channel i2c LED driver
dt-bindings: mfd: qcom,spmi-pmic: Document flash LED controller
dt-bindings: mfd: x-powers,axp152: Document the AXP15060 variant
mfd: axp20x: Add support for AXP15060 PMIC
dt-bindings: mfd: x-powers,axp152: Document the AXP313a variant
counter: rz-mtu3-cnt: Unlock on error in rz_mtu3_count_ceiling_write()
dt-bindings: mfd: dlg,da9063: Document voltage monitoring
dt-bindings: mfd: stm32: Remove unnecessary blank lines
dt-bindings: mfd: qcom,spmi-pmic: Use generic ADC node name in examples
dt-bindings: mfd: syscon: Add nuvoton,ma35d1-sys compatible
MAINTAINERS: Add entries for Renesas RZ/G2L MTU3a counter driver
counter: Add Renesas RZ/G2L MTU3a counter driver
Documentation: ABI: sysfs-bus-counter: add cascade_counts_enable and external_input_phase_clock_select
mfd: Add Renesas RZ/G2L MTU3a core driver
dt-bindings: timer: Document RZ/G2L MTU3a bindings
mfd: rsmu_i2c: Convert to i2c's .probe_new() again
mfd: intel-lpss: Add Intel Meteor Lake PCH-S LPSS PCI IDs
mfd: dln2: Fix memory leak in dln2_probe()
mfd: axp20x: Fix axp288 writable-ranges
...
This patch implements the GPIO function of Intel USB-I2C/GPIO/SPI adapter
device named "La Jolla Cove Adapter" (LJCA). It communicate with LJCA
GPIO module with specific protocol through interfaces exported by LJCA USB
driver.
Signed-off-by: Ye Xiang <xiang.ye@intel.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230225140118.2037220-3-xiang.ye@intel.com
* Fixed suspend issue on Clevo NL5xNU
* Split a new Intel Tangier (library) driver for current and new platforms
* Introduced a new driver for Intel Elkhart Lake PSE GPIO (see also above)
* Contained a few fixes for the previous of_gpio.h cleanup
* Miscellaneous cleanups here and there
The following is an automated git shortlog grouped by driver:
elkhartlake:
- Introduce Intel Elkhart Lake PSE GPIO
gpiolib:
- acpi: Add a ignore wakeup quirk for Clevo NL5xNU
- acpi: Move ACPI device NULL check to acpi_get_driver_gpio_data()
- acpi: use the fwnode in acpi_gpiochip_find()
ich:
- Use devm_gpiochip_add_data() to simplify remove path
merrifield:
- Utilise temporary variable for struct device
- Use dev_err_probe()
- Adapt to Intel Tangier GPIO driver
mips:
- ar7: include linux/gpio/driver.h
mm-lantiq:
- Fix typo in the newly added header filename
powerpc/40x:
- Add missing select OF_GPIO_MM_GPIOCHIP
sh:
- mach-x3proto: Add missing #include <linux/gpio/driver.h>
tangier:
- Introduce Intel Tangier GPIO driver
-----BEGIN PGP SIGNATURE-----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=yI78
-----END PGP SIGNATURE-----
Merge tag 'intel-gpio-v6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel into gpio/for-next
intel-gpio for v6.4-2
* Fixed suspend issue on Clevo NL5xNU
* Split a new Intel Tangier (library) driver for current and new platforms
* Introduced a new driver for Intel Elkhart Lake PSE GPIO (see also above)
* Contained a few fixes for the previous of_gpio.h cleanup
* Miscellaneous cleanups here and there
The following is an automated git shortlog grouped by driver:
elkhartlake:
- Introduce Intel Elkhart Lake PSE GPIO
gpiolib:
- acpi: Add a ignore wakeup quirk for Clevo NL5xNU
- acpi: Move ACPI device NULL check to acpi_get_driver_gpio_data()
- acpi: use the fwnode in acpi_gpiochip_find()
ich:
- Use devm_gpiochip_add_data() to simplify remove path
merrifield:
- Utilise temporary variable for struct device
- Use dev_err_probe()
- Adapt to Intel Tangier GPIO driver
mips:
- ar7: include linux/gpio/driver.h
mm-lantiq:
- Fix typo in the newly added header filename
powerpc/40x:
- Add missing select OF_GPIO_MM_GPIOCHIP
sh:
- mach-x3proto: Add missing #include <linux/gpio/driver.h>
tangier:
- Introduce Intel Tangier GPIO driver
Add minimal driver for Fairchild FXL6408 8-bit I2C-controlled GPIO expander
using the generic regmap based GPIO driver (GPIO_REGMAP).
The driver implements setting the GPIO direction, reading inputs
and writing outputs.
In addition to that the FXL6408 has the following functionalities:
- allows to monitor input ports for data transitions with an interrupt pin
- all inputs can be configured with pull-up or pull-down resistors
Datasheet: https://www.onsemi.com/download/data-sheet/pdf/fxl6408-d.pdf
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Co-developed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
[Bartosz: order includes alphabetically]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This driver adds support for Intel Elkhart Lake PSE GPIO controller,
using Intel Tangier as a library driver.
Signed-off-by: Pandith N <pandith.n@intel.com>
Co-developed-by: Raag Jadav <raag.jadav@intel.com>
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Co-developed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Intel Elkhart Lake and Merrifield platforms have same GPIO IP.
Intel Tangier implements the common GPIO functionalities for both
Elkhart Lake and Merrifield platforms.
Signed-off-by: Pandith N <pandith.n@intel.com>
Co-developed-by: Raag Jadav <raag.jadav@intel.com>
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Co-developed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The Loongson platforms GPIO controller contains 60 GPIO pins in total,
4 of which are dedicated GPIO pins, and the remaining 56 are reused
with other functions. Each GPIO can set input/output and has the
interrupt capability.
This driver added support for Loongson GPIO controller and support to
use DTS or ACPI to descibe GPIO device resources.
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Hongchen Zhang <zhanghongchen@loongson.cn>
Signed-off-by: Liu Peibao <liupeibao@loongson.cn>
Signed-off-by: Juxin Gao <gaojuxin@loongson.cn>
Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The ucb1400 MFD driver and its gpio and touchscreen child
drivers were only used on a few PXA machines that were unused
for a while and are now removed.
Removing these leaves the AC97 support as ALSA specific,
no other drivers are now connected through this interface.
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Lee Jones <lee@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Marek Vasut <marex@denx.de>
Cc: linux-kernel@vger.kernel.org
Cc: linux-gpio@vger.kernel.org
Cc: linux-input@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The iop32x platform was removed, and its gpio driver is now
orphaned.
Cc: Lennert Buytenhek <buytenh@wantstofly.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Now that static device properties understand notion of child nodes and
references, let's teach gpiolib to handle them:
- GPIOs are represented as a references to software nodes representing
gpiochip
- references must have 2 arguments - GPIO number within the chip and
GPIO flags (GPIO_ACTIVE_LOW/GPIO_ACTIVE_HIGH, etc)
- a new PROPERTY_ENTRY_GPIO() macro is supplied to ensure the above
- name of the software node representing gpiochip must match label of
the gpiochip, as we use it to locate gpiochip structure at runtime
The following illustrates use of software nodes to describe a "System"
button that is currently specified via use of gpio_keys_platform_data
in arch/mips/alchemy/board-mtx1.c. It follows bindings specified in
Documentation/devicetree/bindings/input/gpio-keys.yaml.
static const struct software_node mxt1_gpiochip2_node = {
.name = "alchemy-gpio2",
};
static const struct property_entry mtx1_gpio_button_props[] = {
PROPERTY_ENTRY_U32("linux,code", BTN_0),
PROPERTY_ENTRY_STRING("label", "System button"),
PROPERTY_ENTRY_GPIO("gpios", &mxt1_gpiochip2_node, 7, GPIO_ACTIVE_LOW),
{ }
};
Similarly, arch/arm/mach-tegra/board-paz00.c can be converted to:
static const struct software_node tegra_gpiochip_node = {
.name = "tegra-gpio",
};
static struct property_entry wifi_rfkill_prop[] __initdata = {
PROPERTY_ENTRY_STRING("name", "wifi_rfkill"),
PROPERTY_ENTRY_STRING("type", "wlan"),
PROPERTY_ENTRY_GPIO("reset-gpios",
&tegra_gpiochip_node, 25, GPIO_ACTIVE_HIGH);
PROPERTY_ENTRY_GPIO("shutdown-gpios",
&tegra_gpiochip_node, 85, GPIO_ACTIVE_HIGH);
{ },
};
static struct platform_device wifi_rfkill_device = {
.name = "rfkill_gpio",
.id = -1,
};
...
software_node_register(&tegra_gpiochip_node);
device_create_managed_software_node(&wifi_rfkill_device.dev,
wifi_rfkill_prop, NULL);
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This driver implements a GPIO multiplexer based on latches connected to
other GPIOs. A set of data GPIOs is connected to the data input of
multiple latches. The clock input of each latch is driven by another
set of GPIOs. With two 8-bit latches 10 GPIOs can be multiplexed into
16 GPIOs. GPOs might be a better term as in fact the multiplexed pins
are output only.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
[Bartosz: fixed the strange of_device_id formatting]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Exposes consumer library functions to facilitate communication with
devices within the ACCES IDIO-16 family such as the 104-IDIO-16 and
the PCI-IDIO-16.
A CONFIG_GPIO_IDIO_16 Kconfig option is introduced by this patch.
Modules wanting access to these idio-16 library functions should select
this Kconfig option and import the GPIO_IDIO_16 symbol namespace.
Cc: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The Connext chip has 4 gpio cells looking very similar to those of the
Nomadik, whose gpio/pinctrl driver (already featuring devicetree support)
will be used instead of the sta2x11 specific one.
Signed-off-by: Davide Ciminaghi <ciminaghi@gnudd.com>
Acked-by: Giancarlo Asnaghi <giancarlo.asnaghi@st.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
- a new driver for IBM Operational Panel
- a new driver for PinePhone keyboards
- RT5120 PMIC power key support
- various enhancements and support for new models in xpad (Xbox) driver
- a new compatible ID for Elan touchscreen driver
- rework of adp5588-keys driver to support configuring via device
properties (OF, ACPI, etc) instead of platform data, and proper support
of optional gpiochip functionality (and removal of gpio-adp5588 driver)
- improvements to firmware update handling in Synaptics RMI4 driver
- support for double key matrix in mt6779-keypad
- support for polled mode in adc-joystick driver
- other assorted driver fixes, cleanups and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCY0O9YwAKCRBAj56VGEWX
nICKAQD6/pS5tIWFCyYrM/A0xbkYuPWtmXqJTSGANlevU7nypwEAqaH2tYSDAdxM
NylDCPvvduHVmA2ewXgvIlUzjCLr6As=
=cUmW
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.1-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- a new driver for IBM Operational Panel
- a new driver for PinePhone keyboards
- RT5120 PMIC power key support
- various enhancements and support for new models in xpad (Xbox) driver
- a new compatible ID for Elan touchscreen driver
- rework of adp5588-keys driver to support configuring via device
properties (OF, ACPI, etc) instead of platform data, and proper
support of optional gpiochip functionality (and removal of
gpio-adp5588 driver)
- improvements to firmware update handling in Synaptics RMI4 driver
- support for double key matrix in mt6779-keypad
- support for polled mode in adc-joystick driver
- other assorted driver fixes, cleanups and improvements
* tag 'input-for-v6.1-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (90 commits)
Input: i8042 - fix refount leak on sparc
Input: i8042 - add LoongArch support in i8042-acpipnpio.h
Input: i8042 - rename i8042-x86ia64io.h to i8042-acpipnpio.h
Input: pinephone-keyboard - support the proxied I2C bus
Input: pinephone-keyboard - add PinePhone keyboard driver
dt-bindings: input: Add the PinePhone keyboard binding
dt-bindings: input: Convert hid-over-i2c to DT schema
input: drop empty comment blocks
Input: xpad - add X-Box Adaptive Profile button
Input: add ABS_PROFILE to uapi and documentation
Input: xpad - add X-Box Adaptive XBox button
Input: xpad - add X-Box Adaptive support
Input: ims-pcu - fix spelling mistake "BOOLTLOADER" -> "BOOTLOADER"
Input: ibm-panel - add missing MODULE_DEVICE_TABLE
Input: icn8505 - utilize acpi_get_subsystem_id()
Input: xpad - decipher xpadone packages with GIP defines
Input: xpad - refactor using BIT() macro
Input: synaptics-rmi4 - convert to use sysfs_emit() APIs
Input: twl4030-pwrbutton - add missing of.h include
Input: applespi - replace zero-length array with DECLARE_FLEX_ARRAY() helper
...
The SCU firmware on i.MX8 platforms provides a set of APIs to
control the GPIO PINs on the SCU domain. This patch implements the
standard GPIO driver interface to access those PINs on the
SCU domain over the SCU APIs.
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
With commit 9d2b2e83ef ("Input: adp5588-keys - support gpi key events as
'gpio keys'") the irchip functionality is directly supported in the input
driver as the main goal of these pins is to be used as gpio keys. Hence,
this driver can be removed.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Acked-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220829131553.690063-3-nuno.sa@analog.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Exposes consumer library functions providing support for interfaces
compatible with the venerable Intel 8255 Programmable Peripheral
Interface (PPI).
The Intel 8255 PPI first appeared in the early 1970s, initially for the
Intel 8080 and later appearing in the original IBM-PC. The popularity of
the original Intel 8255 chip led to many subsequent variants and clones
of the interface in various chips and integrated circuits. Although
still popular, interfaces compatible with the Intel 8255 PPI are
nowdays typically found embedded in larger VLSI processing chips and
FPGA components rather than as discrete ICs.
A CONFIG_GPIO_I8255 Kconfig option is introduced by this patch. Modules
wanting access to these i8255 library functions should select this
Kconfig option, and import the I8255 symbol namespace.
Tested-by: Fred Eckert <Frede@cmslaser.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: John Hentges <jhentges@accesio.com>
Cc: Jay Dolan <jay.dolan@accesio.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Commit d3164e2f3b ("MIPS: Remove VR41xx support") removed support
for MIPS VR41xx platform, so remove exclusive drivers for this
platform, too.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Here is the big set of char/misc and other small driver subsystem
updates for 5.18-rc1.
Included in here are merges from driver subsystems which contain:
- iio driver updates and new drivers
- fsi driver updates
- fpga driver updates
- habanalabs driver updates and support for new hardware
- soundwire driver updates and new drivers
- phy driver updates and new drivers
- coresight driver updates
- icc driver updates
Individual changes include:
- mei driver updates
- interconnect driver updates
- new PECI driver subsystem added
- vmci driver updates
- lots of tiny misc/char driver updates
There will be two merge conflicts with your tree, one in MAINTAINERS
which is obvious to fix up, and one in drivers/phy/freescale/Kconfig
which also should be easy to resolve.
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYkG3fQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykNEgCfaRG8CRxewDXOO4+GSeA3NGK+AIoAnR89donC
R4bgCjfg8BWIBcVVXg3/
=WWXC
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver updates from Greg KH:
"Here is the big set of char/misc and other small driver subsystem
updates for 5.18-rc1.
Included in here are merges from driver subsystems which contain:
- iio driver updates and new drivers
- fsi driver updates
- fpga driver updates
- habanalabs driver updates and support for new hardware
- soundwire driver updates and new drivers
- phy driver updates and new drivers
- coresight driver updates
- icc driver updates
Individual changes include:
- mei driver updates
- interconnect driver updates
- new PECI driver subsystem added
- vmci driver updates
- lots of tiny misc/char driver updates
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (556 commits)
firmware: google: Properly state IOMEM dependency
kgdbts: fix return value of __setup handler
firmware: sysfb: fix platform-device leak in error path
firmware: stratix10-svc: add missing callback parameter on RSU
arm64: dts: qcom: add non-secure domain property to fastrpc nodes
misc: fastrpc: Add dma handle implementation
misc: fastrpc: Add fdlist implementation
misc: fastrpc: Add helper function to get list and page
misc: fastrpc: Add support to secure memory map
dt-bindings: misc: add fastrpc domain vmid property
misc: fastrpc: check before loading process to the DSP
misc: fastrpc: add secure domain support
dt-bindings: misc: add property to support non-secure DSP
misc: fastrpc: Add support to get DSP capabilities
misc: fastrpc: add support for FASTRPC_IOCTL_MEM_MAP/UNMAP
misc: fastrpc: separate fastrpc device from channel context
dt-bindings: nvmem: brcm,nvram: add basic NVMEM cells
dt-bindings: nvmem: make "reg" property optional
nvmem: brcm_nvram: parse NVRAM content into NVMEM cells
nvmem: dt-bindings: Fix the error of dt-bindings check
...
Delta TN48M switch has an onboard Lattice CPLD that is used as a GPIO
expander.
The CPLD provides 12 pins in total on the TN48M, but on more advanced
switch models it provides up to 192 pins, so the driver is extendable
to support more switches.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Link: https://lore.kernel.org/r/20220131133049.77780-3-robert.marko@sartura.hr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Airoha's GPIO controller on their ARM EN7523 SoCs consists of two banks of 32
GPIOs. Each instance in DT is for a single bank.
Acked-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
- new testing module: gpio-sim that is scheduled to replace gpio-mockup
- initial changes aiming at converting all GPIO drivers to using the fwnode
interface and limiting any references to OF symbols to gpiolib-of.c
- add support for Tegra234 and Tegra241 to gpio-tegra186
- add support for new models (SSD201 and SSD202D) to gpio-msc313
- add basic support for interrupts to gpio-aggregator
- add support for AMDIF031 HID device to gpio-amdpt
- drop support for unused platforms in gpio-xlp
- cleanup leftovers from the removal of the legacy Samsung Exynos GPIO driver
- use raw spinlocks in gpio-aspeed and gpio-aspeed-sgpio to make PREEMPT_RT
happy
- generalize the common 'ngpios' device property by reading it in the core
gpiolib code so that we can remove duplicate reads from drivers
- allow line names from device properties to override names set by drivers
- code shrink in gpiod_add_lookup_table()
- add new model to the DT bindings for gpio-vf610
- convert DT bindings for tegra devices to YAML
- improvements to interrupt handling in gpio-rcar and gpio-rockchip
- updates to intel drivers from Andy (details in the merge commit)
- some minor tweaks, improvements and coding-style fixes all around the
subsystem
-----BEGIN PGP SIGNATURE-----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=OUhL
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"The gpio-sim module is back, this time without any changes to
configfs. This results in a less elegant user-space interface but I
never got any follow-up on the committable items and didn't want to
delay this module for several more months.
Other than that we have support for several new models and some
support going away. We started working on converting GPIO drivers to
using fwnode exclusively in order to limit references to OF symbols to
gpiolib-of.c exclusively. We also have regular tweaks and improvements
all over the place.
Summary:
- new testing module: gpio-sim that is scheduled to replace
gpio-mockup
- initial changes aiming at converting all GPIO drivers to using the
fwnode interface and limiting any references to OF symbols to
gpiolib-of.c
- add support for Tegra234 and Tegra241 to gpio-tegra186
- add support for new models (SSD201 and SSD202D) to gpio-msc313
- add basic support for interrupts to gpio-aggregator
- add support for AMDIF031 HID device to gpio-amdpt
- drop support for unused platforms in gpio-xlp
- cleanup leftovers from the removal of the legacy Samsung Exynos
GPIO driver
- use raw spinlocks in gpio-aspeed and gpio-aspeed-sgpio to make
PREEMPT_RT happy
- generalize the common 'ngpios' device property by reading it in the
core gpiolib code so that we can remove duplicate reads from
drivers
- allow line names from device properties to override names set by
drivers
- code shrink in gpiod_add_lookup_table()
- add new model to the DT bindings for gpio-vf610
- convert DT bindings for tegra devices to YAML
- improvements to interrupt handling in gpio-rcar and gpio-rockchip
- updates to intel drivers from Andy (details in the merge commit)
- some minor tweaks, improvements and coding-style fixes all around
the subsystem"
* tag 'gpio-updates-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (59 commits)
gpio: rcar: Propagate errors from devm_request_irq()
gpio: rcar: Use platform_get_irq() to get the interrupt
gpio: ts5500: Use platform_get_irq() to get the interrupt
gpio: dwapb: Switch to use fwnode instead of of_node
gpiolib: acpi: make fwnode take precedence in struct gpio_chip
dt-bindings: gpio: samsung: drop unused bindings
gpio: max3191x: Use bitmap_free() to free bitmap
gpio: regmap: Switch to use fwnode instead of of_node
gpio: tegra186: Add support for Tegra241
dt-bindings: gpio: Add Tegra241 support
gpio: brcmstb: Use local variable to access OF node
gpio: Remove unused local OF node pointers
gpio: sim: add missing fwnode_handle_put() in gpio_sim_probe()
gpio: msc313: Add support for SSD201 and SSD202D
gpio: msc313: Code clean ups
dt-bindings: gpio: msc313: Add offsets for ssd20xd
dt-bindings: gpio: msc313: Add compatible for ssd20xd
gpio: sim: fix uninitialized ret variable
gpio: Propagate firmware node from a parent device
gpio: Setup parent device and get rid of unnecessary of_node assignment
...
Implement a new, modern GPIO testing module controlled by configfs
attributes instead of module parameters. The goal of this driver is
to provide a replacement for gpio-mockup that will be easily extensible
with new features and doesn't require reloading the module to change
the setup.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
The only known BD70528 use-cases are such that the PMIC is controlled
from separate MCU which is not running Linux. I am not aware of
any Linux driver users. Furthermore, it seems there is no demand for
this IC. Let's ease the maintenance burden and drop the driver. We can
always add it back if there is sudden need for it.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/4eff6bd5eff8afc137dd8c1697cb5c6b2e3aacd2.1637066805.git.matti.vaittinen@fi.rohmeurope.com
This patch adds driver support for the zynqmp modepin GPIO controller.
GPIO modepin driver set and get the value and status of the PS_MODE pin,
based on device-tree pin configuration. These four mode pins are
configurable as input/output. The mode pin has a control register, which
have lower four-bits [0:3] are configurable as input/output, next four-bits
can be used for reading the data as input[4:7], and next setting the
output pin state output[8:11]. By default value of mode pin register is 0.
Signed-off-by: Piyush Mehta <piyush.mehta@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
This patch adds a new driver for Virtio based GPIO devices.
This allows a guest VM running Linux to access GPIO lines provided by
the host. It supports all basic operations, except interrupts for the
GPIO lines.
Based on the initial work posted by:
"Enrico Weigelt, metux IT consult" <lkml@metux.net>.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
This patch add support for rockchip gpio controller, which is supported
in pinctrl driver in the past.
With this patch, the pinctrl-rockchip driver will drop gpio related
codes and populate platform driver to gpio-rockchip.
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Link: https://lore.kernel.org/r/20210816012053.1119069-1-jay.xu@rock-chips.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
IDT 79RC3243x SoCs integrated a gpio controller, which handles up
to 32 gpios. All gpios could be used as an interrupt source.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
- new driver for the Realtek Otto GPIO controller
- ACPI support for gpio-mpc8xxx
- edge event support for gpio-sch (+ Kconfig fixes)
- Kconfig improvements in gpio-ich
- fixes to older issues in gpio-mockup
- ACPI quirk for ignoring EC wakeups on Dell Venue 10 Pro 5055
- improve the GPIO aggregator code by using more generic interfaces instead of
reimplementing them in the driver
- convert the DT bindings for gpio-74x164 to yaml
- documentation improvements
- a slew of other minor fixes and improvements to GPIO drivers
-----BEGIN PGP SIGNATURE-----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=5vLN
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v5.13-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
- new driver for the Realtek Otto GPIO controller
- ACPI support for gpio-mpc8xxx
- edge event support for gpio-sch (+ Kconfig fixes)
- Kconfig improvements in gpio-ich
- fixes to older issues in gpio-mockup
- ACPI quirk for ignoring EC wakeups on Dell Venue 10 Pro 5055
- improve the GPIO aggregator code by using more generic interfaces
instead of reimplementing them in the driver
- convert the DT bindings for gpio-74x164 to yaml
- documentation improvements
- a slew of other minor fixes and improvements to GPIO drivers
* tag 'gpio-updates-for-v5.13-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (34 commits)
dt-bindings: gpio: add YAML description for rockchip,gpio-bank
gpio: mxs: remove useless function
dt-bindings: gpio: fairchild,74hc595: Convert to json-schema
gpio: it87: remove unused code
gpio: 104-dio-48e: Fix coding style issues
gpio: mpc8xxx: Add ACPI support
gpio: ich: Switch to be dependent on LPC_ICH
gpio: sch: Drop MFD_CORE selection
gpio: sch: depends on LPC_SCH
gpiolib: acpi: Add quirk to ignore EC wakeups on Dell Venue 10 Pro 5055
gpio: sch: Hook into ACPI GPE handler to catch GPIO edge events
gpio: sch: Add edge event support
gpio: aggregator: Replace custom get_arg() with a generic next_arg()
lib/cmdline: Export next_arg() for being used in modules
gpio: omap: Use device_get_match_data() helper
gpio: Add Realtek Otto GPIO support
dt-bindings: gpio: Binding for Realtek Otto GPIO
docs: kernel-parameters: Add gpio_mockup_named_lines
docs: kernel-parameters: Move gpio-mockup for alphabetic order
lib: bitmap: provide devm_bitmap_alloc() and devm_bitmap_zalloc()
...
Realtek MIPS SoCs (platform name Otto) have GPIO controllers with up to
64 GPIOs, divided over two banks. Each bank has a set of registers for
32 GPIOs, with support for edge-triggered interrupts.
Each GPIO bank consists of four 8-bit GPIO ports (ABCD and EFGH). Most
registers pack one bit per GPIO, except for the IMR register, which
packs two bits per GPIO (AB-CD).
Although the byte order is currently assumed to have port A..D at offset
0x0..0x3, this has been observed to be reversed on other, Lexra-based,
SoCs (e.g. RTL8196E/97D/97F).
Interrupt support is disabled for the fallback devicetree-compatible
'realtek,otto-gpio'. This allows for quick support of GPIO banks in
which the byte order would be unknown. In this case, the port ordering
in the IMR registers may not match the reversed order in the other
registers (DCBA, and BA-DC or DC-BA).
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Support GPO(s) found from ROHM BD71815 power management IC. The IC has two
GPO pins but only one is properly documented in the data-sheet. The driver
exposes by default only the documented GPO. The second GPO is connected to
E5 pin and is marked as GND in the data-sheet. Control for this
undocumented pin can be enabled using a special DT property.
This driver is derived from work by Peter Yang <yanglsh@embest-tech.com>
although not so much of the original is left.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Driver is gone, no need to keep a Makefile entry for it. Remove.
Reported-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Intel Moorestown and Medfield are quite old Intel Atom based
32-bit platforms, which were in limited use in some Android phones,
tablets and consumer electronics more than eight years ago.
There are no bugs or problems ever reported outside from Intel
for breaking any of that platforms for years. It seems no real
users exists who run more or less fresh kernel on it. The commit
05f4434bc1 ("ASoC: Intel: remove mfld_machine") also in align
with this theory.
Due to above and to reduce a burden of supporting outdated drivers
we remove the support of outdated platforms completely.
Moreover this code duplicates gpio-pxa since the IP has been derived
from XScale implementation. If anybody wants to resurrect this
it has to be part of gpio-pxa.c.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
The zte zx platform is getting removed, so this driver is no
longer needed.
Cc: Jun Nie <jun.nie@linaro.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
