The driver updates seem larger this time around, with changes
is many of the SoC specific drivers, both the custom drivers/soc
ones and the closely related subsystems (memory, bus, firmware,
reset, ...).
The at91 platform gains support for sam9x7 chips in the soc and
power management code. This is the latest variant of one of the
oldest still supported SoC families, using the ARM9 (ARMv5) core.
As usual, the qualcomm snapdragon platform gets a ton of updates in many
of their drivers to add more features and additional SoC support. Most
of these are somewhat firmware related as the platform has a number of
firmware based interfaces to the kernel. A notable addition here is the
inclusion of trace events to two of these drivers.
Herve Codina and Christophe Leroy are now sending updates for
drivers/soc/fsl/ code through the SoC tree, this contains both PowerPC
and Arm specific platforms and has previously been problematic to
maintain. The first update here contains support for newer PowerPC
variants and some cleanups.
The turris mox firmware driver has a number of updates, mostly cleanups.
The Arm SCMI firmware driver gets a major rework to modularize
the existing code into separately loadable drivers for the various
transports, the addition of custom NXP i.MX9 interfaces and a
number of smaller updates.
The Arm FF-A firmware driver gets a feature update to support
the v1.2 version of the specification.
The reset controller drivers have some smaller cleanups and a newly
added driver for the Intel/Mobileye EyeQ5/EyeQ6 MIPS SoCs.
The memory controller drivers get some cleanups and refactoring
for Tegra, TI, Freescale/NXP and a couple more platforms.
Finally there are lots of minor updates to firmware (raspberry pi,
tegra, imx), bus (sunxi, omap, tegra) and soc (rockchips, tegra, amlogic,
mediatek) drivers and their DT bindings.
-----BEGIN PGP SIGNATURE-----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=EauF
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"The driver updates seem larger this time around, with changes is many
of the SoC specific drivers, both the custom drivers/soc ones and the
closely related subsystems (memory, bus, firmware, reset, ...).
The at91 platform gains support for sam9x7 chips in the soc and power
management code. This is the latest variant of one of the oldest still
supported SoC families, using the ARM9 (ARMv5) core.
As usual, the qualcomm snapdragon platform gets a ton of updates in
many of their drivers to add more features and additional SoC support.
Most of these are somewhat firmware related as the platform has a
number of firmware based interfaces to the kernel. A notable addition
here is the inclusion of trace events to two of these drivers.
Herve Codina and Christophe Leroy are now sending updates for
drivers/soc/fsl/ code through the SoC tree, this contains both PowerPC
and Arm specific platforms and has previously been problematic to
maintain. The first update here contains support for newer PowerPC
variants and some cleanups.
The turris mox firmware driver has a number of updates, mostly
cleanups.
The Arm SCMI firmware driver gets a major rework to modularize the
existing code into separately loadable drivers for the various
transports, the addition of custom NXP i.MX9 interfaces and a number
of smaller updates.
The Arm FF-A firmware driver gets a feature update to support the v1.2
version of the specification.
The reset controller drivers have some smaller cleanups and a newly
added driver for the Intel/Mobileye EyeQ5/EyeQ6 MIPS SoCs.
The memory controller drivers get some cleanups and refactoring for
Tegra, TI, Freescale/NXP and a couple more platforms.
Finally there are lots of minor updates to firmware (raspberry pi,
tegra, imx), bus (sunxi, omap, tegra) and soc (rockchips, tegra,
amlogic, mediatek) drivers and their DT bindings"
* tag 'soc-drivers-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (212 commits)
firmware: imx: remove duplicate scmi_imx_misc_ctrl_get()
platform: cznic: turris-omnia-mcu: Fix error check in omnia_mcu_register_trng()
bus: sunxi-rsb: Simplify code with dev_err_probe()
soc: fsl: qe: ucc: Export ucc_mux_set_grant_tsa_bkpt
soc: fsl: cpm1: qmc: Fix dependency on fsl_soc.h
dt-bindings: arm: rockchip: Add rk3576 compatible string to pmu.yaml
soc: fsl: qbman: Remove redundant warnings
soc: fsl: qbman: Use iommu_paging_domain_alloc()
MAINTAINERS: Add QE files related to the Freescale QMC controller
soc: fsl: cpm1: qmc: Handle QUICC Engine (QE) soft-qmc firmware
soc: fsl: cpm1: qmc: Add support for QUICC Engine (QE) implementation
soc: fsl: qe: Add missing PUSHSCHED command
soc: fsl: qe: Add resource-managed muram allocators
soc: fsl: cpm1: qmc: Introduce qmc_version
soc: fsl: cpm1: qmc: Rename SCC_GSMRL_MODE_QMC
soc: fsl: cpm1: qmc: Handle RPACK initialization
soc: fsl: cpm1: qmc: Rename qmc_chan_command()
soc: fsl: cpm1: qmc: Introduce qmc_{init,exit}_xcc() and their CPM1 version
soc: fsl: cpm1: qmc: Introduce qmc_init_resource() and its CPM1 version
soc: fsl: cpm1: qmc: Re-order probe() operations
...
ACPI:
* Enable PMCG erratum workaround for HiSilicon HIP10 and 11 platforms.
* Ensure arm64-specific IORT header is covered by MAINTAINERS.
CPU Errata:
* Enable workaround for hardware access/dirty issue on Ampere-1A cores.
Memory management:
* Define PHYSMEM_END to fix a crash in the amdgpu driver.
* Avoid tripping over invalid kernel mappings on the kexec() path.
* Userspace support for the Permission Overlay Extension (POE) using
protection keys.
Perf and PMUs:
* Add support for the "fixed instruction counter" extension in the CPU
PMU architecture.
* Extend and fix the event encodings for Apple's M1 CPU PMU.
* Allow LSM hooks to decide on SPE permissions for physical profiling.
* Add support for the CMN S3 and NI-700 PMUs.
Confidential Computing:
* Add support for booting an arm64 kernel as a protected guest under
Android's "Protected KVM" (pKVM) hypervisor.
Selftests:
* Fix vector length issues in the SVE/SME sigreturn tests
* Fix build warning in the ptrace tests.
Timers:
* Add support for PR_{G,S}ET_TSC so that 'rr' can deal with
non-determinism arising from the architected counter.
Miscellaneous:
* Rework our IPI-based CPU stopping code to try NMIs if regular IPIs
don't succeed.
* Minor fixes and cleanups.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmbkVNEQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNKeIB/9YtbN7JMgsXktM94GP03r3tlFF36Y1S51S
+zdDZclAVZCTCZN+PaFeAZ/+ah2EQYrY6rtDoHUSEMQdF9kH+ycuIPDTwaJ4Qkam
QKXMpAgtY/4yf2rX4lhDF8rEvkhLDsu7oGDhqUZQsA33GrMBHfgA3oqpYwlVjvGq
gkm7olTo9LdWAxkPpnjGrjB6Mv5Dq8dJRhW+0Q5AntI5zx3RdYGJZA9GUSzyYCCt
FIYOtMmWPkQ0kKxIVxOxAOm/ubhfyCs2sjSfkaa3vtvtt+Yjye1Xd81rFciIbPgP
QlK/Mes2kBZmjhkeus8guLI5Vi7tx3DQMkNqLXkHAAzOoC4oConE
=6osL
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"The highlights are support for Arm's "Permission Overlay Extension"
using memory protection keys, support for running as a protected guest
on Android as well as perf support for a bunch of new interconnect
PMUs.
Summary:
ACPI:
- Enable PMCG erratum workaround for HiSilicon HIP10 and 11
platforms.
- Ensure arm64-specific IORT header is covered by MAINTAINERS.
CPU Errata:
- Enable workaround for hardware access/dirty issue on Ampere-1A
cores.
Memory management:
- Define PHYSMEM_END to fix a crash in the amdgpu driver.
- Avoid tripping over invalid kernel mappings on the kexec() path.
- Userspace support for the Permission Overlay Extension (POE) using
protection keys.
Perf and PMUs:
- Add support for the "fixed instruction counter" extension in the
CPU PMU architecture.
- Extend and fix the event encodings for Apple's M1 CPU PMU.
- Allow LSM hooks to decide on SPE permissions for physical
profiling.
- Add support for the CMN S3 and NI-700 PMUs.
Confidential Computing:
- Add support for booting an arm64 kernel as a protected guest under
Android's "Protected KVM" (pKVM) hypervisor.
Selftests:
- Fix vector length issues in the SVE/SME sigreturn tests
- Fix build warning in the ptrace tests.
Timers:
- Add support for PR_{G,S}ET_TSC so that 'rr' can deal with
non-determinism arising from the architected counter.
Miscellaneous:
- Rework our IPI-based CPU stopping code to try NMIs if regular IPIs
don't succeed.
- Minor fixes and cleanups"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (94 commits)
perf: arm-ni: Fix an NULL vs IS_ERR() bug
arm64: hibernate: Fix warning for cast from restricted gfp_t
arm64: esr: Define ESR_ELx_EC_* constants as UL
arm64: pkeys: remove redundant WARN
perf: arm_pmuv3: Use BR_RETIRED for HW branch event if enabled
MAINTAINERS: List Arm interconnect PMUs as supported
perf: Add driver for Arm NI-700 interconnect PMU
dt-bindings/perf: Add Arm NI-700 PMU
perf/arm-cmn: Improve format attr printing
perf/arm-cmn: Clean up unnecessary NUMA_NO_NODE check
arm64/mm: use lm_alias() with addresses passed to memblock_free()
mm: arm64: document why pte is not advanced in contpte_ptep_set_access_flags()
arm64: Expose the end of the linear map in PHYSMEM_END
arm64: trans_pgd: mark PTEs entries as valid to avoid dead kexec()
arm64/mm: Delete __init region from memblock.reserved
perf/arm-cmn: Support CMN S3
dt-bindings: perf: arm-cmn: Add CMN S3
perf/arm-cmn: Refactor DTC PMU register access
perf/arm-cmn: Make cycle counts less surprising
perf/arm-cmn: Improve build-time assertion
...
The bulk of the changes this time are for device tree files in the
rockchips platform, addressing correctness issues on individual
boards, plus one change in the rk356x SoC file to make it match
the binding.
The only other changes that came in are
- a CPU frequencey scaling fix for JH7110 (RISC-V)
- a build fix for the cznic hwrandom driver
- a fix for a deadlock in qualcomm uefi secure
application firmware driver
-----BEGIN PGP SIGNATURE-----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=Waa0
-----END PGP SIGNATURE-----
Merge tag 'arm-fixes-6.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"The bulk of the changes this time are for device tree files in the
rockchips platform, addressing correctness issues on individual
boards, plus one change in the rk356x SoC file to make it match the
binding.
The only other changes that came in are
- a CPU frequencey scaling fix for JH7110 (RISC-V)
- a build fix for the cznic hwrandom driver
- a fix for a deadlock in qualcomm uefi secure application firmware
driver"
* tag 'arm-fixes-6.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
platform: cznic: turris-omnia-mcu: fix HW_RANDOM dependency
riscv: dts: starfive: jh7110-common: Fix lower rate of CPUfreq by setting PLL0 rate to 1.5GHz
firmware: qcom: uefisecapp: Fix deadlock in qcuefi_acquire()
arm64: dts: rockchip: Fix compatibles for RK3588 VO{0,1}_GRF
dt-bindings: soc: rockchip: Fix compatibles for RK3588 VO{0,1}_GRF
arm64: dts: rockchip: override BIOS_DISABLE signal via GPIO hog on RK3399 Puma
arm64: dts: rockchip: fix eMMC/SPI corruption when audio has been used on RK3399 Puma
arm64: dts: rockchip: fix PMIC interrupt pin in pinctrl for ROCK Pi E
arm64: dts: rockchip: Remove broken tsadc pinctrl binding for rk356x
Support is added for making SCM driver configure the system either for a
full or minimal ramdump following a system crash. The ramdump mode is
changed from being enable-only to enable/disable as requested.
The QSEECOM uefisecapp interface is allow-listed on Surface Laptop 7 and
Lenovo Thinkpad T14s, providing EFI variable access.
The change to match the SMD RPM driver based on the SMD channel name is
reverted, in favor of stepping back to OF-based matching, as a means to
get module autoloading to work properly.
AOSS, APR, ICE, OCMEM, PBS and SMP2P drivers has error handling cleaned
up using scoped resources.
Trace events are added to the BWMON and SMP2P drivers, for better
insights into their operations.
The X1E LLCC configuration data is updated based on recommended values.
A number of platforms are added to the in-kernel PD-mapper.
SocInfo driver is extended with IDs from SM7325, QCS8275 and QCS8300
families.
-----BEGIN PGP SIGNATURE-----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=hZ0b
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=6GV4
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.12
Support is added for making SCM driver configure the system either for a
full or minimal ramdump following a system crash. The ramdump mode is
changed from being enable-only to enable/disable as requested.
The QSEECOM uefisecapp interface is allow-listed on Surface Laptop 7 and
Lenovo Thinkpad T14s, providing EFI variable access.
The change to match the SMD RPM driver based on the SMD channel name is
reverted, in favor of stepping back to OF-based matching, as a means to
get module autoloading to work properly.
AOSS, APR, ICE, OCMEM, PBS and SMP2P drivers has error handling cleaned
up using scoped resources.
Trace events are added to the BWMON and SMP2P drivers, for better
insights into their operations.
The X1E LLCC configuration data is updated based on recommended values.
A number of platforms are added to the in-kernel PD-mapper.
SocInfo driver is extended with IDs from SM7325, QCS8275 and QCS8300
families.
* tag 'qcom-drivers-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (33 commits)
firmware: qcom: scm: Allow QSEECOM on Surface Laptop 7 models
dt-bindings: soc: qcom: qcom,pmic-glink: Document SM7325 compatible
soc: qcom: pd_mapper: Add SM7325 compatible
soc: qcom: socinfo: Add Soc IDs for SM7325 family
dt-bindings: arm: qcom,ids: Add IDs for SM7325 family
soc: qcom: socinfo: add QCS8275/QCS8300 SoC ID
dt-bindings: arm: qcom,ids: add SoC ID for QCS8275/QCS8300
soc: qcom: smp2p: use scoped device node handling to simplify error paths
soc: qcom: pbs: use scoped device node handling to simplify error paths
soc: qcom: ocmem: use scoped device node handling to simplify error paths
soc: qcom: ice: use scoped device node handling to simplify error paths
soc: qcom: aoss: simplify with scoped for each OF child loop
soc: qcom: apr: simplify with scoped for each OF child loop
soc: qcom: smd-rpm: add qcom,smd-rpm compatible
dt-bindings: soc: qcom: smd-rpm: add generic compatibles
Revert "soc: qcom: smd-rpm: Match rpmsg channel instead of compatible"
firmware: qcom: scm: Add multiple download mode support
firmware: qcom: scm: Refactor code to support multiple dload mode
soc: qcom: pd_mapper: Add more older platforms without domains
soc: qcom: pd_mapper: Add X1E80100
...
Link: https://lore.kernel.org/r/20240904193042.15118-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This resolves a deadlock in the Qualcomm uefisecapp driver following the
attempt to acquire global context is acquired in the case the device
isn't probed.
-----BEGIN PGP SIGNATURE-----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=HJYI
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=rJbm
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-fixes-for-6.11-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
One more Qualcomm driver fix for v6.11
This resolves a deadlock in the Qualcomm uefisecapp driver following the
attempt to acquire global context is acquired in the case the device
isn't probed.
* tag 'qcom-drivers-fixes-for-6.11-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
firmware: qcom: uefisecapp: Fix deadlock in qcuefi_acquire()
Link: https://lore.kernel.org/r/20240904145214.4089-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The changes in this set remove some unused code and simplify error paths
using scoped helpers.
-----BEGIN PGP SIGNATURE-----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=pomi
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=aNb0
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-6.12-firmware' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/drivers
firmware: tegra: Changes for v6.12-rc1
The changes in this set remove some unused code and simplify error paths
using scoped helpers.
* tag 'tegra-for-6.12-firmware' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
firmware: tegra: bpmp: Use scoped device node handling to simplify error paths
firmware: tegra: bpmp: Drop unused mbox_client_to_bpmp()
Link: https://lore.kernel.org/r/20240830141004.3195210-2-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Few main features include:
1. SCMI transport as stand-alone drivers
Currently the SCMI transport layer is being built embedded into in
the core SCMI stack. Some of these transports, despite being currently
part of the main SCMI module, are indeed also registered with different
subsystems like optee or virtio, and actively probed also by those.
This leads to a few awkward and convoluted tricks to properly handle
such interactions at boot time in the SCMI stack.
This change adds the new logic to the core SCMI stack so that each
existing transport is transitioned to be a standi-alone driver. With
that all the probe deferral and awkward retries between the SCMI
core stack and the transports has been removed, since no more needed.
2. Support for obtaining transport descriptors from the devicetree
SCMI platform firmwares might have different designs depending on
the platform. Some of the transport descriptors rely on such design.
E.g. the maximum receive channel timeout value might vary depending
on the specific underlying hardware and firmware design choices.
This change adds support for max-rx-timeout-ms property to describe
the transport needs of a specific platform design. It will be extended
in the future to obtain other such hardware/firmware dependent
transport related descriptors.
3. NXP i.MX95 specific SCMI vendor protocol extensions
SCMI specification allows vendor or platform-specific extensions to
the interface. NXP i.MX95 System Manager(SM) that implements SCMI
extends the interface to implement couple of vendor/platform specific
protocol, namely:
a. Battery Backed Module(BBM) Protocol
This protocol is intended provide access to the battery-backed
module. This contains persistent storage (GPR), an RTC, and the
ON/OFF button. The protocol can also provide access to similar
functions implemented via external board components.
b. MISC Protocol for misc settings
This includes controls that are misc settings/actions that must
be exposed from the SM to agents. They are device specific and
are usually define to access bit fields in various mix block
control modules, IOMUX_GPR, and other GPR/CSR owned by the SM.
4. SCMI debug/tracking metrics
Since SCMI involves interaction with the entity(software, firmware
and/or hardware) providing services or features, it is quite useful
to track certain metrics(for pure debugging purposes) like how many
messages were sent or received, were there any failures, what kind
of failures, ..etc. This feature adds support for the same via debugfs.
Apart from these main features, there are some miscellaneous updates, fixes
and cleanups.
-----BEGIN PGP SIGNATURE-----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=fUHS
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=28qZ
-----END PGP SIGNATURE-----
Merge tag 'scmi-updates-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm SCMI updates for v6.12
Few main features include:
1. SCMI transport as stand-alone drivers
Currently the SCMI transport layer is being built embedded into in
the core SCMI stack. Some of these transports, despite being currently
part of the main SCMI module, are indeed also registered with different
subsystems like optee or virtio, and actively probed also by those.
This leads to a few awkward and convoluted tricks to properly handle
such interactions at boot time in the SCMI stack.
This change adds the new logic to the core SCMI stack so that each
existing transport is transitioned to be a standi-alone driver. With
that all the probe deferral and awkward retries between the SCMI
core stack and the transports has been removed, since no more needed.
2. Support for obtaining transport descriptors from the devicetree
SCMI platform firmwares might have different designs depending on
the platform. Some of the transport descriptors rely on such design.
E.g. the maximum receive channel timeout value might vary depending
on the specific underlying hardware and firmware design choices.
This change adds support for max-rx-timeout-ms property to describe
the transport needs of a specific platform design. It will be extended
in the future to obtain other such hardware/firmware dependent
transport related descriptors.
3. NXP i.MX95 specific SCMI vendor protocol extensions
SCMI specification allows vendor or platform-specific extensions to
the interface. NXP i.MX95 System Manager(SM) that implements SCMI
extends the interface to implement couple of vendor/platform specific
protocol, namely:
a. Battery Backed Module(BBM) Protocol
This protocol is intended provide access to the battery-backed
module. This contains persistent storage (GPR), an RTC, and the
ON/OFF button. The protocol can also provide access to similar
functions implemented via external board components.
b. MISC Protocol for misc settings
This includes controls that are misc settings/actions that must
be exposed from the SM to agents. They are device specific and
are usually define to access bit fields in various mix block
control modules, IOMUX_GPR, and other GPR/CSR owned by the SM.
4. SCMI debug/tracking metrics
Since SCMI involves interaction with the entity(software, firmware
and/or hardware) providing services or features, it is quite useful
to track certain metrics(for pure debugging purposes) like how many
messages were sent or received, were there any failures, what kind
of failures, ..etc. This feature adds support for the same via debugfs.
Apart from these main features, there are some miscellaneous updates, fixes
and cleanups.
* tag 'scmi-updates-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: (31 commits)
rtc: support i.MX95 BBM RTC
input: keyboard: support i.MX95 BBM module
firmware: imx: Add i.MX95 MISC driver
firmware: arm_scmi: Add initial support for i.MX MISC protocol
firmware: arm_scmi: Add initial support for i.MX BBM protocol
firmware: arm_scmi: Add NXP i.MX95 SCMI documentation
dt-bindings: firmware: Add i.MX95 SCMI Extension protocol
firmware: arm_scmi: Replace comma with the semicolon
firmware: arm_scmi: Replace the use of of_node_put() to __free(device_node)
firmware: arm_scmi: Fix trivial whitespace/coding style issues
firmware: arm_scmi: Use max-rx-timeout-ms from devicetree
dt-bindings: firmware: arm,scmi: Introduce property max-rx-timeout-ms
firmware: arm_scmi: Remove const from transport descriptors
firmware: arm_scmi: Simplify with scoped for each OF child loop
firmware: arm_scmi: Update various protocols versions
firmware: arm_scmi: Remove legacy transport-layer code
firmware: arm_scmi: Make VirtIO transport a standalone driver
firmware: arm_scmi: Make OPTEE transport a standalone driver
firmware: arm_scmi: Make SMC transport a standalone driver
firmware: arm_scmi: Make MBOX transport a standalone driver
...
Link: https://lore.kernel.org/r/20240830135918.2383664-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The main addition this time is the basic support for FF-A v1.2
specification which includes support for newly added:
1. FFA_MSG_SEND_DIRECT_{REQ,RESP}2
2. FFA_PARTITION_INFO_GET_REGS
3. FFA_YIELD support in direct messaging
Apart from these, the changes include support to fetch the Rx/Tx buffer
size using FFA_FEATURES, addition of the FF-A FIDs for v1.2 and some
coding style cleanups.
-----BEGIN PGP SIGNATURE-----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=BpAd
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=/d2i
-----END PGP SIGNATURE-----
Merge tag 'ffa-updates-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm FF-A updates for v6.12
The main addition this time is the basic support for FF-A v1.2
specification which includes support for newly added:
1. FFA_MSG_SEND_DIRECT_{REQ,RESP}2
2. FFA_PARTITION_INFO_GET_REGS
3. FFA_YIELD support in direct messaging
Apart from these, the changes include support to fetch the Rx/Tx buffer
size using FFA_FEATURES, addition of the FF-A FIDs for v1.2 and some
coding style cleanups.
* tag 'ffa-updates-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_ffa: Fetch the Rx/Tx buffer size using ffa_features()
firmware: arm_ffa: Add support for FFA_YIELD in direct messaging
firmware: arm_ffa: Add support for FFA_MSG_SEND_DIRECT_{REQ,RESP}2
firmware: arm_ffa: Add support for FFA_PARTITION_INFO_GET_REGS
firmware: arm_ffa: Move the function ffa_features() earlier
firmware: arm_ffa: Update the FF-A command list with v1.2 additions
firmware: arm_ffa: Some coding style fixes
Link: https://lore.kernel.org/r/20240830135759.2383431-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Use devm_mutex_init() instead of mutex_init(), to properly call
mutex_destroy() on probe failure / driver unbind.
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240831092050.23093-13-kabel@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Use dev_err_probe() where possible in the driver's .probe() method.
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240831092050.23093-11-kabel@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Use devm resource management for driver's mailbox. This allows us to get
rid of the driver's .remove() method and the gotos in .probe().
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240831092050.23093-10-kabel@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Simplify debugfs code: do not check for errors, as debugfs errors should
be ignored, and use devm action for dropping the debugfs directory.
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240831092050.23093-9-kabel@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
In order to create attribute files in /sys/firmware/turris-mox-rwtm,
this driver creates it's own kobject type.
Simplify this by dropping this own kobject creation, and instead
creating standard device attribute files.
For backwards compatibility with sysfs ABI, create a symlink
/sys/firmware/turris-mox-rwtm, pointing to this device's sysfs
directory.
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240831092050.23093-8-kabel@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Drop including of.h, include several other headers that are used but not
included directly.
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240831092050.23093-6-kabel@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Hide signature generation related constants behind macros instead of
hardcoding the values.
Use SHA512_DIGEST_SIZE from crypto/sha2.h instead of hardcoded 64 as the
message size.
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240831092050.23093-5-kabel@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Use the boolean type for has_board_info, has_pubkey and last_sig_done
members of the driver's private structure.
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240831092050.23093-4-kabel@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Use the ETH_ALEN macro instead of hardcoded 6 for MAC address length.
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240831092050.23093-3-kabel@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The 4096 bytes limit in mox_hwrng_read() is due to the DMA buffer being
allocated to one PAGE_SIZE bytes. Use new local macro constant
RWTM_DMA_BUFFER_SIZE at allocation time and when used in mox_hwrng_read().
Use SZ_4K instead of PAGE_SIZE. Although PAGE_SIZE is never set to a
larger value on Armada 3720, it theoretically could, and this would be a
waste of space.
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240831092050.23093-2-kabel@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
There is a fairly large number of bug fixes for Qualcomm platforms,
most of them addressing issues with the devicetree files for the
newly added Snapdragon X1 based laptops to make them more reliable.
The Qualcomm driver changes address a few build-time issues as well
as runtime problems in the tzmem and scm firmware, the USB Type-C
driver, and the cmd-db and pmic_glink soc drivers.
The NXP i.MX usually gets a bunch of devicetree fixes that is proportional
to the number of supported machines. This includes both warning fixes
and correctness for the 64-bit i.MX9, i.MX8 and layerscape platforms,
as well as a single fix for a 32-bit i.MX6 based board.
The other changes are the usual minor changes, including an update to the
MAINTAINERS file, an omap3 dts file and a SoC driver for mpfs (risc-v).
-----BEGIN PGP SIGNATURE-----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=tK5m
-----END PGP SIGNATURE-----
Merge tag 'arm-fixes-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"There is a fairly large number of bug fixes for Qualcomm platforms,
most of them addressing issues with the devicetree files for the newly
added Snapdragon X1 based laptops to make them more reliable.
The Qualcomm driver changes address a few build-time issues as well as
runtime problems in the tzmem and scm firmware, the USB Type-C driver,
and the cmd-db and pmic_glink soc drivers.
The NXP i.MX usually gets a bunch of devicetree fixes that is
proportional to the number of supported machines. This includes both
warning fixes and correctness for the 64-bit i.MX9, i.MX8 and
layerscape platforms, as well as a single fix for a 32-bit i.MX6 based
board.
The other changes are the usual minor changes, including an update to
the MAINTAINERS file, an omap3 dts file and a SoC driver for mpfs
(risc-v)"
* tag 'arm-fixes-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (50 commits)
firmware: microchip: fix incorrect error report of programming:timeout on success
soc: qcom: pd-mapper: Fix singleton refcount
firmware: qcom: tzmem: disable sdm670 platform
soc: qcom: pmic_glink: Actually communicate when remote goes down
usb: typec: ucsi: Move unregister out of atomic section
soc: qcom: pmic_glink: Fix race during initialization
firmware: qcom: qseecom: remove unused functions
firmware: qcom: tzmem: fix virtual-to-physical address conversion
firmware: qcom: scm: Mark get_wq_ctx() as atomic call
arm64: dts: qcom: x1e80100: Fix Adreno SMMU global interrupt
arm64: dts: qcom: disable GPU on x1e80100 by default
arm64: dts: imx8mm-phygate: fix typo pinctrcl-0
arm64: dts: imx95: correct L3Cache cache-sets
arm64: dts: imx95: correct a55 power-domains
arm64: dts: freescale: imx93-tqma9352-mba93xxla: fix typo
arm64: dts: freescale: imx93-tqma9352: fix CMA alloc-ranges
ARM: dts: imx6dl-yapp43: Increase LED current to match the yapp4 HW design
arm64: dts: imx93: update default value for snps,clk-csr
arm64: dts: freescale: tqma9352: Fix watchdog reset
arm64: dts: imx8mp-beacon-kit: Fix Stereo Audio on WM8962
...
If the __qcuefi pointer is not set, then in the original code, we would
hold onto the lock. That means that if we tried to set it later, then
it would cause a deadlock. Drop the lock on the error path. That's
what all the callers are expecting.
Fixes: 759e7a2b62 ("firmware: Add support for Qualcomm UEFI Secure Application")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/19829bc4-1b6f-47f7-847a-e90c25749e40@stanley.mountain
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
arm64 will soon require its own callback to initialise services
that are only available on this architecture. Introduce a hook
that can be overloaded by the architecture.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240830130150.8568-2-will@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
vmwgfx related to buffer operations, a fix for video/aperture with
non-VGA primary devices, and a preemption status fix for v3d
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQTkHFbLp4ejekA/qfgnX84Zoj2+dgUCZtCKzwAKCRAnX84Zoj2+
drMcAYDvGyENhD3jcOSM0vd1pEgleMSKoD4sbsj+JO6vMona7/dWzpUXHyxZg0P9
7gOZAkwBgMQHQKWBOga/LnloJi1/GC4Y7pjR4tDzLRO4ejbGdStLK8vEMKJKltwB
ej1UUueBAQ==
=4GlG
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2024-08-29' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
A revert for a previous TTM commit causing stuttering, 3 fixes for
vmwgfx related to buffer operations, a fix for video/aperture with
non-VGA primary devices, and a preemption status fix for v3d
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240829-efficient-swift-from-lemuria-f60c05@houat
The i.MX95 System manager exports SCMI MISC protocol for linux to do
various settings, such as set board gpio expander as wakeup source.
The driver is to add the support.
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Message-Id: <20240823-imx95-bbm-misc-v2-v8-5-e600ed9e9271@nxp.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
i.MX95 System Manager(SM) firmware includes a SCMI vendor protocol, SCMI
MISC protocol which includes controls that are misc settings/actions that
must be exposed from the SM to agents. They are device specific and are
usually define to access bit fields in various mix block control modules,
IOMUX_GPR, and other General Purpose registers, Control Status Registers
owned by the SM.
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Message-Id: <20240823-imx95-bbm-misc-v2-v8-3-e600ed9e9271@nxp.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
i.MX95 has a battery-backed module(BBM), which has persistent storage
(GPR), an RTC, and the ON/OFF button. The System Manager(SM) firmware
use SCMI vendor protocol(SCMI BBM) to let agent be able to use GPR, RTC
and ON/OFF button.
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Message-Id: <20240823-imx95-bbm-misc-v2-v8-2-e600ed9e9271@nxp.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
This corrects the tzmem virt-to-phys conversion, which caused issues for
the uefisecapp implementation of EFI variable access. SDM670 is excluded
from tzmem usage due to reported issues.
The SCM get wait queue context call is corrected to be marked ATOMIC and
some dead code in qseecom, following the tzmem conversion, is removed.
The memory backing command DB is remapped writecombined, to avoid XPU
violations when Linux runs without the Qualcomm hypervisor.
Two compile fixes are added for pd-mapper, and the broken reference
count is corrected, to make pd-mapper deal with remoteprocs going away.
In pmic_glink a race condition where the client callbacks might be
called before we returned the client handle is corrected. The broken conditions
for when to signal that the firmware is going down is also corrected.
In the pmic_glink UCSI driver, the ucsi_unregister() is moved out of the
pdr callback, as this is being invoked in atomic context.
Konrad's email address is updated in MAINTAINERS, and related mailmap
entries are added.
-----BEGIN PGP SIGNATURE-----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=Zo90
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=pkFq
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-fixes-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm driver fixes for v6.11
This corrects the tzmem virt-to-phys conversion, which caused issues for
the uefisecapp implementation of EFI variable access. SDM670 is excluded
from tzmem usage due to reported issues.
The SCM get wait queue context call is corrected to be marked ATOMIC and
some dead code in qseecom, following the tzmem conversion, is removed.
The memory backing command DB is remapped writecombined, to avoid XPU
violations when Linux runs without the Qualcomm hypervisor.
Two compile fixes are added for pd-mapper, and the broken reference
count is corrected, to make pd-mapper deal with remoteprocs going away.
In pmic_glink a race condition where the client callbacks might be
called before we returned the client handle is corrected. The broken conditions
for when to signal that the firmware is going down is also corrected.
In the pmic_glink UCSI driver, the ucsi_unregister() is moved out of the
pdr callback, as this is being invoked in atomic context.
Konrad's email address is updated in MAINTAINERS, and related mailmap
entries are added.
* tag 'qcom-drivers-fixes-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: pd-mapper: Fix singleton refcount
firmware: qcom: tzmem: disable sdm670 platform
soc: qcom: pmic_glink: Actually communicate when remote goes down
usb: typec: ucsi: Move unregister out of atomic section
soc: qcom: pmic_glink: Fix race during initialization
firmware: qcom: qseecom: remove unused functions
firmware: qcom: tzmem: fix virtual-to-physical address conversion
firmware: qcom: scm: Mark get_wq_ctx() as atomic call
MAINTAINERS: Update Konrad Dybcio's email address
mailmap: Add an entry for Konrad Dybcio
soc: qcom: pd-mapper: mark qcom_pdm_domains as __maybe_unused
soc: qcom: cmd-db: Map shared memory as WC, not WB
soc: qcom: pd-mapper: Depend on ARCH_QCOM || COMPILE_TEST
Link: https://lore.kernel.org/r/20240826145209.1646159-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Replace the typo comma with the semicolon. No functional change.
Message-Id: <20240827143838.1465913-4-sudeep.holla@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Use __free for device_node values, and thus drop calls to of_node_put.
The goal is simplify of_node reference cleanup by using this scope-based
of_node_put() cleanup to simplify function exit handling. When using __free
a resource is allocated within a block, it is automatically freed at the
end of the block.
This cleanup aligns well with the recent change in shmem.c to use __free
instead of explicit of_node_put() calls.
Message-Id: <20240827143838.1465913-3-sudeep.holla@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Obtain the device node reference with scoped/cleanup.h to reduce error
handling and make the code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
In aperture_remove_conflicting_pci_devices(), we currently only
call sysfb_disable() on vga class devices. This leads to the
following problem when the pimary device is not VGA compatible:
1. A PCI device with a non-VGA class is the boot display
2. That device is probed first and it is not a VGA device so
sysfb_disable() is not called, but the device resources
are freed by aperture_detach_platform_device()
3. Non-primary GPU has a VGA class and it ends up calling sysfb_disable()
4. NULL pointer dereference via sysfb_disable() since the resources
have already been freed by aperture_detach_platform_device() when
it was called by the other device.
Fix this by passing a device pointer to sysfb_disable() and checking
the device to determine if we should execute it or not.
v2: Fix build when CONFIG_SCREEN_INFO is not set
v3: Move device check into the mutex
Drop primary variable in aperture_remove_conflicting_pci_devices()
Drop __init on pci sysfb_pci_dev_is_enabled()
Fixes: 5ae3716cfd ("video/aperture: Only remove sysfb on the default vga pci device")
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Helge Deller <deller@gmx.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240821191135.829765-1-alexander.deucher@amd.com
After successfully programming the SPI flash with an MFPS auto update
image, the error sysfs attribute reports programming:timeout.
This is caused by an incorrect check on the return value from
wait_for_completion_timeout() in mpfs_auto_update_poll_complete().
Fixes: ec5b0f1193 ("firmware: microchip: add PolarFire SoC Auto Update support")
Signed-off-by: Steve Wilkins <steve.wilkins@raymarine.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
The Pixel 3a returns 4291821499 (-3145797 or 0xFFCFFFBB) when attempting
to load the GPU firmware if tzmem is allowed. Disable it on SDM670 so
the GPU can successfully probe.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20240730013834.41840-2-mailingradian@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
An endpoint can discover the minimum size, maximum size and alignment
boundary for the Rx/Tx buffers by passing the function ID of the
FFA_RXTX_MAP ABI as input in the FFA_FEATURES interface. The maximum
size is an optional field and a value of 0 means that the partition
manager or the hypervisor does not enforce a maximum size.
Use the discovery mechanism and remove the hardcoded 4kB buffer size.
If the discovery fails, it still defaults to 4kB.
Message-Id: <20240820-ffa_v1-2-v2-7-18c0c5f3c65e@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Successful completion of both direct messaging function can be indicated
through an invocation of FFA_YIELD or GGA_INTERRUPT by the callee.
FFA_INTERRUPT indicates that the direct request was interrupted and must
be resumed through the FFA_RUN interface which is already done in the
driver.
FFA_YIELD indicates that the receiver endpoint has transitioned to the
blocked runtime state and must be resumed through the FFA_RUN interface.
However, the way receiver endpoint gets unblocked is implementation
defined. So, the driver just sleeps for 1 - 2ms and issues FFA_RUN. It
can return to the caller with FFA_YIELD is the receiver endpoint is still
blocked.
Message-Id: <20240820-ffa_v1-2-v2-6-18c0c5f3c65e@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
FFA_MSG_SEND_DIRECT_{REQ,RESP} supported only x3-x7 to pass implementation
defined values as part of the message. This may not be sufficient sometimes
and also it would be good to use all the registers supported by SMCCC v1.2
(x0-x17) for such register based communication.
Also another limitation with the FFA_MSG_SEND_DIRECT_{REQ,RESP} is the
ability to target a specific service within the partition based on it's
UUID.
In order to address both of the above limitation, FF-A v1.2 introduced
FFA_MSG_SEND_DIRECT_{REQ,RESP}2 which has the ability to target the
message to a specific service based on its UUID within a partition as
well as utilise all the available registers(x4-x17 specifically) for
the communication.
This change adds support for FFA_MSG_SEND_DIRECT_REQ2 and
FFA_MSG_SEND_DIRECT_RESP2.
Message-Id: <20240820-ffa_v1-2-v2-5-18c0c5f3c65e@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
FF-A v1.2 introduced FFA_PARTITION_INFO_GET_REGS which is similar to
FFA_PARTITION_INFO_GET except that the former uses the registers to
get the required information instead of the Rx buffer which the latter
uses.
We need to first check if the platform supports this new API using
FFA_FEATURES so that we can fallback to the FFA_PARTITION_INFO_GET
(which is mandatory) if FFA_PARTITION_INFO_GET_REGS is not implemented.
Message-Id: <20240820-ffa_v1-2-v2-4-18c0c5f3c65e@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
We need to use ffa_features() in ffa_partition_probe() to detect if
the newer FFA_PARTITION_INFO_GET_REGS API is supported in the platform
or not. To avoid unnecessary forward declaration within the file, let
us just move this ffa_features() earlier.
No funtional change.
Message-Id: <20240820-ffa_v1-2-v2-3-18c0c5f3c65e@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Arm Firmware Framework for A-profile(FFA) v1.2 introduces register based
discovery mechanism and direct messaging extensions that enables to target
specific UUID within a partition.
Let us add all the newly supported FF-A function IDs in the spec.
Also update to the error values and associated handling.
Message-Id: <20240820-ffa_v1-2-v2-2-18c0c5f3c65e@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
