Add the number of bits a curve has to the ecc_curve definition to be able
to derive the number of bytes a curve requires for its coordinates from it.
It also allows one to identify a curve by its particular size. Set the
number of bits on all curve definitions.
Tested-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Vitaly Chikunov <vt@altlinux.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
res.x has been calculated by ecc_point_mult_shamir, which uses
'mod curve_prime' on res.x and therefore p > res.x with 'p' being the
curve_prime. Further, it is true that for the NIST curves p > n with 'n'
being the 'curve_order' and therefore the following may be true as well:
p > res.x >= n.
If res.x >= n then res.x mod n can be calculated by iteratively sub-
tracting n from res.x until res.x < n. For NIST P192/256/384 this can be
done in a single subtraction. This can also be done in a single
subtraction for NIST P521.
The mathematical reason why a single subtraction is sufficient is due to
the values of 'p' and 'n' of the NIST curves where the following holds
true:
note: max(res.x) = p - 1
max(res.x) - n < n
p - 1 - n < n
p - 1 < 2n => holds true for the NIST curves
Tested-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In preparation for support of NIST P521, adjust the basic tests on the
length of the provided key parameters to only ensure that the length of the
x plus y coordinates parameter array is not an odd number and that each
coordinate fits into an array of 'ndigits' digits. Mathematical tests on
the key's parameters are then done in ecc_is_pubkey_valid_full rejecting
invalid keys.
The change is necessary since NIST P521 keys do not have keys with
coordinates that each require 'full' digits (= all bits in u64 used).
NIST P521 only requires 2 bytes (9 bits) in the most significant digit
unlike NIST P192/256/384 that each require multiple 'full' digits.
Tested-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
For NIST P192/256/384 the public key's x and y parameters could be copied
directly from a given array since both parameters filled 'ndigits' of
digits (a 'digit' is a u64). For support of NIST P521 the key parameters
need to have leading zeros prepended to the most significant digit since
only 2 bytes of the most significant digit are provided.
Therefore, implement ecc_digits_from_bytes to convert a byte array into an
array of digits and use this function in ecdsa_set_pub_key where an input
byte array needs to be converted into digits.
Suggested-by: Lukas Wunner <lukas@wunner.de>
Tested-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace hard-coded numbers with ECC_CURVE_NIST_P192/256/384_DIGITS where
possible.
Tested-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The for loop will be executed at least once, so i > 0. If the loop
is interrupted before i is incremented (e.g., when checking len for NULL),
i will not be checked.
Found by Linux Verification Center (linuxtesting.org) with Svace.
Signed-off-by: Roman Smirnov <r.smirnov@omp.ru>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
With the current state of the code, ecc_get_curve() cannot return
NULL in crypto_ecdh_shared_secret() and ecc_make_pub_key(). This is
conditioned by the fact that they are only called from ecdh_compute_value(),
which implements the kpp_alg::{generate_public_key,compute_shared_secret}()
methods. Also ecdh implements the kpp_alg::init() method, which is called
before the other methods and sets ecdh_ctx::curve_id to a valid value.
Signed-off-by: Roman Smirnov <r.smirnov@omp.ru>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
private_key is overwritten with the key parameter passed in by the
caller (if present), or alternatively a newly generated private key.
However, it is possible that the caller provides a key (or the newly
generated key) which is shorter than the previous key. In that
scenario, some key material from the previous key would not be
overwritten. The easiest solution is to explicitly zeroize the entire
private_key array first.
Note that this patch slightly changes the behavior of this function:
previously, if the ecc_gen_privkey failed, the old private_key would
remain. Now, the private_key is always zeroized. This behavior is
consistent with the case where params.key is set and ecc_is_key_valid
fails.
Signed-off-by: Joachim Vandersmissen <git@jvdsn.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This commit comes at the tail end of a greater effort to remove the
empty elements at the end of the ctl_table arrays (sentinels) which will
reduce the overall build time size of the kernel and run time memory
bloat by ~64 bytes per sentinel (further information Link :
https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/)
Remove sentinel from crypto_sysctl_table
Signed-off-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace memzero_explicit() and kvfree() with kvfree_sensitive() to fix
the following Coccinelle/coccicheck warning reported by
kfree_sensitive.cocci:
WARNING opportunity for kfree_sensitive/kvfree_sensitive
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add module alias with the algorithm cra_name similar to what we have for
RSA-related and other algorithms.
The kernel attempts to modprobe asymmetric algorithms using the names
"crypto-$cra_name" and "crypto-$cra_name-all." However, since these
aliases are currently missing, the modules are not loaded. For instance,
when using the `add_key` function, the hash algorithm is typically
loaded automatically, but the asymmetric algorithm is not.
Steps to test:
1. Create certificate
openssl req -x509 -sha256 -newkey ec \
-pkeyopt "ec_paramgen_curve:secp384r1" -keyout key.pem -days 365 \
-subj '/CN=test' -nodes -outform der -out nist-p384.der
2. Optionally, trace module requests with: trace-cmd stream -e module &
3. Trigger add_key call for the cert:
# keyctl padd asymmetric "" @u < nist-p384.der
641069229
# lsmod | head -2
Module Size Used by
ecdsa_generic 16384 0
Fixes: c12d448ba9 ("crypto: ecdsa - Register NIST P384 and extend test suite")
Cc: stable@vger.kernel.org
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Vitaly Chikunov <vt@altlinux.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
FIPS 186-5 [1] was released approximately 1 year ago. The most
interesting change for ecc_gen_privkey is the removal of curves with
order < 224 bits. This is minimum is now checked in step 1. It is
unlikely that there is still any benefit in generating private keys for
curves with n < 224, as those curves provide less than 112 bits of
security strength and are therefore unsafe for any modern usage.
This patch also updates the documentation for __ecc_is_key_valid and
ecc_gen_privkey to clarify which FIPS 186-5 method is being used to
generate private keys. Previous documentation mentioned that "extra
random bits" was used. However, this did not match the code. Instead,
the code currently uses (and always has used) the "rejection sampling"
("testing candidates" in FIPS 186-4) method.
[1]: https://doi.org/10.6028/NIST.FIPS.186-5
Signed-off-by: Joachim Vandersmissen <git@jvdsn.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add module alias with the algorithm cra_name similar to what we have for
RSA-related and other algorithms.
The kernel attempts to modprobe asymmetric algorithms using the names
"crypto-$cra_name" and "crypto-$cra_name-all." However, since these
aliases are currently missing, the modules are not loaded. For instance,
when using the `add_key` function, the hash algorithm is typically
loaded automatically, but the asymmetric algorithm is not.
Steps to test:
1. Cert is generated usings ima-evm-utils test suite with
`gen-keys.sh`, example cert is provided below:
$ base64 -d >test-gost2012_512-A.cer <<EOF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=
EOF
2. Optionally, trace module requests with: trace-cmd stream -e module &
3. Trigger add_key call for the cert:
# keyctl padd asymmetric "" @u <test-gost2012_512-A.cer
939910969
# lsmod | head -3
Module Size Used by
ecrdsa_generic 16384 0
streebog_generic 28672 0
Repored-by: Paul Wolneykien <manowar@altlinux.org>
Cc: stable@vger.kernel.org
Signed-off-by: Vitaly Chikunov <vt@altlinux.org>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove support for the "Crypto usage statistics" feature
(CONFIG_CRYPTO_STATS). This feature does not appear to have ever been
used, and it is harmful because it significantly reduces performance and
is a large maintenance burden.
Covering each of these points in detail:
1. Feature is not being used
Since these generic crypto statistics are only readable using netlink,
it's fairly straightforward to look for programs that use them. I'm
unable to find any evidence that any such programs exist. For example,
Debian Code Search returns no hits except the kernel header and kernel
code itself and translations of the kernel header:
https://codesearch.debian.net/search?q=CRYPTOCFGA_STAT&literal=1&perpkg=1
The patch series that added this feature in 2018
(https://lore.kernel.org/linux-crypto/1537351855-16618-1-git-send-email-clabbe@baylibre.com/)
said "The goal is to have an ifconfig for crypto device." This doesn't
appear to have happened.
It's not clear that there is real demand for crypto statistics. Just
because the kernel provides other types of statistics such as I/O and
networking statistics and some people find those useful does not mean
that crypto statistics are useful too.
Further evidence that programs are not using CONFIG_CRYPTO_STATS is that
it was able to be disabled in RHEL and Fedora as a bug fix
(https://gitlab.com/redhat/centos-stream/src/kernel/centos-stream-9/-/merge_requests/2947).
Even further evidence comes from the fact that there are and have been
bugs in how the stats work, but they were never reported. For example,
before Linux v6.7 hash stats were double-counted in most cases.
There has also never been any documentation for this feature, so it
might be hard to use even if someone wanted to.
2. CONFIG_CRYPTO_STATS significantly reduces performance
Enabling CONFIG_CRYPTO_STATS significantly reduces the performance of
the crypto API, even if no program ever retrieves the statistics. This
primarily affects systems with a large number of CPUs. For example,
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2039576 reported
that Lustre client encryption performance improved from 21.7GB/s to
48.2GB/s by disabling CONFIG_CRYPTO_STATS.
It can be argued that this means that CONFIG_CRYPTO_STATS should be
optimized with per-cpu counters similar to many of the networking
counters. But no one has done this in 5+ years. This is consistent
with the fact that the feature appears to be unused, so there seems to
be little interest in improving it as opposed to just disabling it.
It can be argued that because CONFIG_CRYPTO_STATS is off by default,
performance doesn't matter. But Linux distros tend to error on the side
of enabling options. The option is enabled in Ubuntu and Arch Linux,
and until recently was enabled in RHEL and Fedora (see above). So, even
just having the option available is harmful to users.
3. CONFIG_CRYPTO_STATS is a large maintenance burden
There are over 1000 lines of code associated with CONFIG_CRYPTO_STATS,
spread among 32 files. It significantly complicates much of the
implementation of the crypto API. After the initial submission, many
fixes and refactorings have consumed effort of multiple people to keep
this feature "working". We should be spending this effort elsewhere.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
While looking at UDP receive performance, I saw sk_wake_async()
was no longer inlined.
This matters at least on AMD Zen1-4 platforms (see SRSO)
This might be because rcu_read_lock() and rcu_read_unlock()
are no longer nops in recent kernels ?
Add sk_wake_async_rcu() variant, which must be called from
contexts already holding rcu lock.
As SOCK_FASYNC is deprecated in modern days, use unlikely()
to give a hint to the compiler.
sk_wake_async_rcu() is properly inlined from
__udp_enqueue_schedule_skb() and sock_def_readable().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240328144032.1864988-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
zero in iaa.
-----BEGIN PGP SIGNATURE-----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=Mau0
-----END PGP SIGNATURE-----
Merge tag 'v6.9-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"This fixes a regression that broke iwd as well as a divide by zero in
iaa"
* tag 'v6.9-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: iaa - Fix nr_cpus < nr_iaa case
Revert "crypto: pkcs7 - remove sha1 support"
* Support for various vector-accelerated crypto routines.
* Hibernation is now enabled for portable kernel builds.
* mmap_rnd_bits_max is larger on systems with larger VAs.
* Support for fast GUP.
* Support for membarrier-based instruction cache synchronization.
* Support for the Andes hart-level interrupt controller and PMU.
* Some cleanups around unaligned access speed probing and Kconfig
settings.
* Support for ACPI LPI and CPPC.
* Various cleanus related to barriers.
* A handful of fixes.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmX9icgTHHBhbG1lckBk
YWJiZWx0LmNvbQAKCRAuExnzX7sYib+UD/4xyL6UMixx6A06BVBL9UT4vOrxRvNr
JIihG5y5QNMjes9DHWL35mZTMqFtQ0tq94ViWFLmJWloV/8KRVM2C9R9KX7vplf3
M/OwvP106spxgvNHoeQbycgs42RU1t2mpqT7N1iK2hCjqieP3vLn6hsSLXWTAG0L
3gQbQw6XCLC3hPyLq+nbFY2i4faeCmpXWmixoy/IvQ5calZQrRU0LNlP6lcMBhVo
uocjG0uGAhrahw2s81jxcMZcxa3AvUCiplapdD5H5v9rBM85SkYJj2Q9SqdSorkb
xzuimRnKPI5s47yM3pTfZY0qnQUYHV7PXXuw4WujpCQVQdhaG+Ggq63UUZA61J9t
IzZK2zdcfHqICrGTtXImUzRT3dcc3oq+IFq4tTY+rEJm29hrXkAtx+qBm5xtMvax
fJz5feJ/iT0u7MDj4Oq24n+Kpl+Olm+MJaZX3m5Ovi/9V6a9iK9HXqxg9/Fs0fMO
+J/0kTgd8Vu9CYH7KNWz3uztcO9eMAH3VyzuXuab4BGj1i1Y/9EjpALQi7rDN73S
OsYQX6NnzMkBV4dvElJVLXiPlvNlMHZZwdak5CqPb48jaJu6iiIZAuvOrG6/naGP
wnQSLVA2WWWoOkl3AJhxfpa11CLhbMl9E2gYm1VtNvASXoSFIxlAq1Yv3sG8yjty
4ZT0rYFJOstYiQ==
=3dL5
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.9-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for various vector-accelerated crypto routines
- Hibernation is now enabled for portable kernel builds
- mmap_rnd_bits_max is larger on systems with larger VAs
- Support for fast GUP
- Support for membarrier-based instruction cache synchronization
- Support for the Andes hart-level interrupt controller and PMU
- Some cleanups around unaligned access speed probing and Kconfig
settings
- Support for ACPI LPI and CPPC
- Various cleanus related to barriers
- A handful of fixes
* tag 'riscv-for-linus-6.9-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (66 commits)
riscv: Fix syscall wrapper for >word-size arguments
crypto: riscv - add vector crypto accelerated AES-CBC-CTS
crypto: riscv - parallelize AES-CBC decryption
riscv: Only flush the mm icache when setting an exec pte
riscv: Use kcalloc() instead of kzalloc()
riscv/barrier: Add missing space after ','
riscv/barrier: Consolidate fence definitions
riscv/barrier: Define RISCV_FULL_BARRIER
riscv/barrier: Define __{mb,rmb,wmb}
RISC-V: defconfig: Enable CONFIG_ACPI_CPPC_CPUFREQ
cpufreq: Move CPPC configs to common Kconfig and add RISC-V
ACPI: RISC-V: Add CPPC driver
ACPI: Enable ACPI_PROCESSOR for RISC-V
ACPI: RISC-V: Add LPI driver
cpuidle: RISC-V: Move few functions to arch/riscv
riscv: Introduce set_compat_task() in asm/compat.h
riscv: Introduce is_compat_thread() into compat.h
riscv: add compile-time test into is_compat_task()
riscv: Replace direct thread flag check with is_compat_task()
riscv: Improve arch_get_mmap_end() macro
...
This reverts commit 16ab7cb582 because it
broke iwd. iwd uses the KEYCTL_PKEY_* UAPIs via its dependency libell,
and apparently it is relying on SHA-1 signature support. These UAPIs
are fairly obscure, and their documentation does not mention which
algorithms they support. iwd really should be using a properly
supported userspace crypto library instead. Regardless, since something
broke we have to revert the change.
It may be possible that some parts of this commit can be reinstated
without breaking iwd (e.g. probably the removal of MODULE_SIG_SHA1), but
for now this just does a full revert to get things working again.
Reported-by: Karel Balej <balejk@matfyz.cz>
Closes: https://lore.kernel.org/r/CZSHRUIJ4RKL.34T4EASV5DNJM@matfyz.cz
Cc: Dimitri John Ledkov <dimitri.ledkov@canonical.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Tested-by: Karel Balej <balejk@matfyz.cz>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
API:
- Avoid unnecessary copying in scomp for trivial SG lists.
Algorithms:
- Optimise NEON CCM implementation on ARM64.
Drivers:
- Add queue stop/query debugfs support in hisilicon/qm.
-
-----BEGIN PGP SIGNATURE-----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=Uw2R
-----END PGP SIGNATURE-----
Merge tag 'v6.9-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Avoid unnecessary copying in scomp for trivial SG lists
Algorithms:
- Optimise NEON CCM implementation on ARM64
Drivers:
- Add queue stop/query debugfs support in hisilicon/qm
- Intel qat updates and cleanups"
* tag 'v6.9-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (79 commits)
Revert "crypto: remove CONFIG_CRYPTO_STATS"
crypto: scomp - remove memcpy if sg_nents is 1 and pages are lowmem
crypto: tcrypt - add ffdhe2048(dh) test
crypto: iaa - fix the missing CRYPTO_ALG_ASYNC in cra_flags
crypto: hisilicon/zip - fix the missing CRYPTO_ALG_ASYNC in cra_flags
hwrng: hisi - use dev_err_probe
MAINTAINERS: Remove T Ambarus from few mchp entries
crypto: iaa - Fix comp/decomp delay statistics
crypto: iaa - Fix async_disable descriptor leak
dt-bindings: rng: atmel,at91-trng: add sam9x7 TRNG
dt-bindings: crypto: add sam9x7 in Atmel TDES
dt-bindings: crypto: add sam9x7 in Atmel SHA
dt-bindings: crypto: add sam9x7 in Atmel AES
crypto: remove CONFIG_CRYPTO_STATS
crypto: dh - Make public key test FIPS-only
crypto: rockchip - fix to check return value
crypto: jitter - fix CRYPTO_JITTERENTROPY help text
crypto: qat - make ring to service map common for QAT GEN4
crypto: qat - fix ring to service map for dcc in 420xx
crypto: qat - fix ring to service map for dcc in 4xxx
...
heap optimizations".
- Kuan-Wei Chiu has also sped up the library sorting code in the series
"lib/sort: Optimize the number of swaps and comparisons".
- Alexey Gladkov has added the ability for code running within an IPC
namespace to alter its IPC and MQ limits. The series is "Allow to
change ipc/mq sysctls inside ipc namespace".
- Geert Uytterhoeven has contributed some dhrystone maintenance work in
the series "lib: dhry: miscellaneous cleanups".
- Ryusuke Konishi continues nilfs2 maintenance work in the series
"nilfs2: eliminate kmap and kmap_atomic calls"
"nilfs2: fix kernel bug at submit_bh_wbc()"
- Nathan Chancellor has updated our build tools requirements in the
series "Bump the minimum supported version of LLVM to 13.0.1".
- Muhammad Usama Anjum continues with the selftests maintenance work in
the series "selftests/mm: Improve run_vmtests.sh".
- Oleg Nesterov has done some maintenance work against the signal code
in the series "get_signal: minor cleanups and fix".
Plus the usual shower of singleton patches in various parts of the tree.
Please see the individual changelogs for details.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZfMnvgAKCRDdBJ7gKXxA
jjKMAP4/Upq07D4wjkMVPb+QrkipbbLpdcgJ++q3z6rba4zhPQD+M3SFriIJk/Xh
tKVmvihFxfAhdDthseXcIf1nBjMALwY=
=8rVc
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2024-03-14-09-36' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- Kuan-Wei Chiu has developed the well-named series "lib min_heap: Min
heap optimizations".
- Kuan-Wei Chiu has also sped up the library sorting code in the series
"lib/sort: Optimize the number of swaps and comparisons".
- Alexey Gladkov has added the ability for code running within an IPC
namespace to alter its IPC and MQ limits. The series is "Allow to
change ipc/mq sysctls inside ipc namespace".
- Geert Uytterhoeven has contributed some dhrystone maintenance work in
the series "lib: dhry: miscellaneous cleanups".
- Ryusuke Konishi continues nilfs2 maintenance work in the series
"nilfs2: eliminate kmap and kmap_atomic calls"
"nilfs2: fix kernel bug at submit_bh_wbc()"
- Nathan Chancellor has updated our build tools requirements in the
series "Bump the minimum supported version of LLVM to 13.0.1".
- Muhammad Usama Anjum continues with the selftests maintenance work in
the series "selftests/mm: Improve run_vmtests.sh".
- Oleg Nesterov has done some maintenance work against the signal code
in the series "get_signal: minor cleanups and fix".
Plus the usual shower of singleton patches in various parts of the tree.
Please see the individual changelogs for details.
* tag 'mm-nonmm-stable-2024-03-14-09-36' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (77 commits)
nilfs2: prevent kernel bug at submit_bh_wbc()
nilfs2: fix failure to detect DAT corruption in btree and direct mappings
ocfs2: enable ocfs2_listxattr for special files
ocfs2: remove SLAB_MEM_SPREAD flag usage
assoc_array: fix the return value in assoc_array_insert_mid_shortcut()
buildid: use kmap_local_page()
watchdog/core: remove sysctl handlers from public header
nilfs2: use div64_ul() instead of do_div()
mul_u64_u64_div_u64: increase precision by conditionally swapping a and b
kexec: copy only happens before uchunk goes to zero
get_signal: don't initialize ksig->info if SIGNAL_GROUP_EXIT/group_exec_task
get_signal: hide_si_addr_tag_bits: fix the usage of uninitialized ksig
get_signal: don't abuse ksig->info.si_signo and ksig->sig
const_structs.checkpatch: add device_type
Normalise "name (ad@dr)" MODULE_AUTHORs to "name <ad@dr>"
dyndbg: replace kstrdup() + strchr() with kstrdup_and_replace()
list: leverage list_is_head() for list_entry_is_head()
nilfs2: MAINTAINERS: drop unreachable project mirror site
smp: make __smp_processor_id() 0-argument macro
fat: fix uninitialized field in nostale filehandles
...
This reverts commit 2beb81fbf0.
While removing CONFIG_CRYPTO_STATS is a worthy goal, this also
removed unrelated infrastructure such as crypto_comp_alg_common.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
while sg_nents is 1, which is always true for the current kernel
as the only user - zswap is this case, we might have a chance to
remove memcpy, thus improve the performance.
Though sg_nents is 1, its buffer might cross two pages. If those
pages are highmem, we have no cheap way to map them to contiguous
virtual address because kmap doesn't support more than one page
(kmap single higmem page could be still expensive for tlb) and
vmap is expensive.
So we also test and enure page is not highmem in order to safely
use page_to_virt before removing the memcpy. The good news is
that in the most majority of cases, we are lowmem, and we are
always lowmem in those modern and popular hardware.
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Tested-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Commit 7dce598197 ("crypto: dh - implement ffdheXYZ(dh) templates")
implemented the said templates. Add ffdhe2048(dh) test as it is the
fastest one. This is a requirement for the FIPS certification.
Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove support for the "Crypto usage statistics" feature
(CONFIG_CRYPTO_STATS). This feature does not appear to have ever been
used, and it is harmful because it significantly reduces performance and
is a large maintenance burden.
Covering each of these points in detail:
1. Feature is not being used
Since these generic crypto statistics are only readable using netlink,
it's fairly straightforward to look for programs that use them. I'm
unable to find any evidence that any such programs exist. For example,
Debian Code Search returns no hits except the kernel header and kernel
code itself and translations of the kernel header:
https://codesearch.debian.net/search?q=CRYPTOCFGA_STAT&literal=1&perpkg=1
The patch series that added this feature in 2018
(https://lore.kernel.org/linux-crypto/1537351855-16618-1-git-send-email-clabbe@baylibre.com/)
said "The goal is to have an ifconfig for crypto device." This doesn't
appear to have happened.
It's not clear that there is real demand for crypto statistics. Just
because the kernel provides other types of statistics such as I/O and
networking statistics and some people find those useful does not mean
that crypto statistics are useful too.
Further evidence that programs are not using CONFIG_CRYPTO_STATS is that
it was able to be disabled in RHEL and Fedora as a bug fix
(https://gitlab.com/redhat/centos-stream/src/kernel/centos-stream-9/-/merge_requests/2947).
Even further evidence comes from the fact that there are and have been
bugs in how the stats work, but they were never reported. For example,
before Linux v6.7 hash stats were double-counted in most cases.
There has also never been any documentation for this feature, so it
might be hard to use even if someone wanted to.
2. CONFIG_CRYPTO_STATS significantly reduces performance
Enabling CONFIG_CRYPTO_STATS significantly reduces the performance of
the crypto API, even if no program ever retrieves the statistics. This
primarily affects systems with large number of CPUs. For example,
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2039576 reported
that Lustre client encryption performance improved from 21.7GB/s to
48.2GB/s by disabling CONFIG_CRYPTO_STATS.
It can be argued that this means that CONFIG_CRYPTO_STATS should be
optimized with per-cpu counters similar to many of the networking
counters. But no one has done this in 5+ years. This is consistent
with the fact that the feature appears to be unused, so there seems to
be little interest in improving it as opposed to just disabling it.
It can be argued that because CONFIG_CRYPTO_STATS is off by default,
performance doesn't matter. But Linux distros tend to error on the side
of enabling options. The option is enabled in Ubuntu and Arch Linux,
and until recently was enabled in RHEL and Fedora (see above). So, even
just having the option available is harmful to users.
3. CONFIG_CRYPTO_STATS is a large maintenance burden
There are over 1000 lines of code associated with CONFIG_CRYPTO_STATS,
spread among 32 files. It significantly complicates much of the
implementation of the crypto API. After the initial submission, many
fixes and refactorings have consumed effort of multiple people to keep
this feature "working". We should be spending this effort elsewhere.
Cc: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The function dh_is_pubkey_valid was added to for FIPS but it was
only partially conditional to fips_enabled.
In particular, the first test in the function relies on the last
test to work properly, but the last test is only run in FIPS mode.
Fix this inconsistency by making the whole function conditional
on fips_enabled.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Correct various small problems in the help text:
a. change 2 spaces to ", "
b. finish an incomplete sentence
c. change non-working URL to working URL
Fixes: a9a98d49da ("crypto: Kconfig - simplify compression/RNG entries")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218458
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: Robert Elliott <elliott@hpe.com>
Cc: Christoph Biedl <bugzilla.kernel.bpeb@manchmal.in-ulm.de>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Acked-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The lskcipher glue code for skcipher needs to copy the IV every
time rather than only on the first and last request. Otherwise
those algorithms that use IV to perform chaining may break, e.g.,
CBC.
This is because crypto_skcipher_import/export do not include the
IV as part of the saved state.
Reported-by: syzbot+b90b904ef6bdfdafec1d@syzkaller.appspotmail.com
Fixes: 662ea18d08 ("crypto: skcipher - Make use of internal state")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
LLVM moved their issue tracker from their own Bugzilla instance to GitHub
issues. While all of the links are still valid, they may not necessarily
show the most up to date information around the issues, as all updates
will occur on GitHub, not Bugzilla.
Another complication is that the Bugzilla issue number is not always the
same as the GitHub issue number. Thankfully, LLVM maintains this mapping
through two shortlinks:
https://llvm.org/bz<num> -> https://bugs.llvm.org/show_bug.cgi?id=<num>
https://llvm.org/pr<num> -> https://github.com/llvm/llvm-project/issues/<mapped_num>
Switch all "https://bugs.llvm.org/show_bug.cgi?id=<num>" links to the
"https://llvm.org/pr<num>" shortlink so that the links show the most up to
date information. Each migrated issue links back to the Bugzilla entry,
so there should be no loss of fidelity of information here.
Link: https://lkml.kernel.org/r/20240109-update-llvm-links-v1-3-eb09b59db071@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Fangrui Song <maskray@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Mykola Lysenko <mykolal@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
SP 800-56Br2, Section 7.1.1 [1] specifies that:
1. If m does not satisfy 1 < m < (n – 1), output an indication that m is
out of range, and exit without further processing.
Similarly, Section 7.1.2 of the same standard specifies that:
1. If the ciphertext c does not satisfy 1 < c < (n – 1), output an
indication that the ciphertext is out of range, and exit without further
processing.
This range is slightly more conservative than RFC3447, as it also
excludes RSA fixed points 0, 1, and n - 1.
[1] https://doi.org/10.6028/NIST.SP.800-56Br2
Signed-off-by: Joachim Vandersmissen <git@jvdsn.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since crypto_hash_alg_has_setkey() is only called from ahash.c itself,
make it a static function.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When a zero-length message is hashed by algif_hash, and an error
is triggered, it tries to free an SG list that was never allocated
in the first place. Fix this by not freeing the SG list on the
zero-length error path.
Reported-by: Shigeru Yoshida <syoshida@redhat.com>
Reported-by: xingwei lee <xrivendell7@gmail.com>
Fixes: b6d972f689 ("crypto: af_alg/hash: Fix recvmsg() after sendmsg(MSG_MORE)")
Cc: <stable@vger.kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reported-by: syzbot+3266db0c26d1fbbe3abb@syzkaller.appspotmail.com
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The cbc template should not be applied on stream ciphers, especially
ones that have internal state. Enforce this by checking the state
size when the instance is created.
Reported-by: syzbot+050eeedd6c285d8c42f2@syzkaller.appspotmail.com
Fixes: 47309ea135 ("crypto: arc4 - Add internal state")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Commit a93492cae3 ("crypto: ccree - remove data unit size support")
removed support for the xts512 and xts4096 algorithms, but left them
defined in testmgr.c. This patch removes those definitions.
Signed-off-by: Joachim Vandersmissen <git@jvdsn.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The pointer secs is being assigned a value however secs is never
read afterwards. The pointer secs is redundant and can be removed.
Cleans up clang scan build warning:
warning: Although the value stored to 'secs' is used in the enclosing
expression, the value is never actually read from 'secs'
[deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The assignment to nbytes is redundant, the while loop needs
to just refer to the value in walk.nbytes and the value of
nbytes is being re-assigned inside the loop on both paths
of the following if-statement. Remove redundant assignment.
Cleans up clang scan build warning:
warning: Although the value stored to 'nbytes' is used in
the enclosing expression, the value is never actually read
from 'nbytes' [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Create a crypto subdirectory for added accelerated cryptography routines
and hook it into the riscv Kbuild and the main crypto Kconfig.
Signed-off-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jerry Shih <jerry.shih@sifive.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20240122002024.27477-4-ebiggers@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
When ecb is used to wrap an lskcipher, the statesize isn't set
correctly. Fix this by making the simple instance creator set
the statesize.
Reported-by: syzbot+8ffb0839a24e9c6bfa76@syzkaller.appspotmail.com
Reported-by: Edward Adam Davis <eadavis@qq.com>
Fixes: 662ea18d08 ("crypto: skcipher - Make use of internal state")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Disallow registration of two algorithms with identical driver names.
Cc: <stable@vger.kernel.org>
Reported-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch registers the deflate-iaa deflate compression algorithm and
hooks it up to the IAA hardware using the 'fixed' compression mode
introduced in the previous patch.
Because the IAA hardware has a 4k history-window limitation, only
buffers <= 4k, or that have been compressed using a <= 4k history
window, are technically compliant with the deflate spec, which allows
for a window of up to 32k. Because of this limitation, the IAA fixed
mode deflate algorithm is given its own algorithm name, 'deflate-iaa'.
With this change, the deflate-iaa crypto algorithm is registered and
operational, and compression and decompression operations are fully
enabled following the successful binding of the first IAA workqueue
to the iaa_crypto sub-driver.
when there are no IAA workqueues bound to the driver, the IAA crypto
algorithm can be unregistered by removing the module.
A new iaa_crypto 'verify_compress' driver attribute is also added,
allowing the user to toggle compression verification. If set, each
compress will be internally decompressed and the contents verified,
returning error codes if unsuccessful. This can be toggled with 0/1:
echo 0 > /sys/bus/dsa/drivers/crypto/verify_compress
The default setting is '1' - verify all compresses.
The verify_compress value setting at the time the algorithm is
registered is captured in the algorithm's crypto_ctx and used for all
compresses when using the algorithm.
[ Based on work originally by George Powley, Jing Lin and Kyung Min
Park ]
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Unlike algif_aead which is always issued in one go (thus limiting
the maximum size of the request), algif_skcipher has always allowed
unlimited input data by cutting them up as necessary and feeding
the fragments to the underlying algorithm one at a time.
However, because of deficiencies in the API, this has been broken
for most stream ciphers such as arc4 or chacha. This is because
they have an internal state in addition to the IV that must be
preserved in order to continue processing.
Fix this by using the new skcipher state API.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The arc4 algorithm has always had internal state. It's been buggy
from day one in that the state has been stored in the shared tfm
object. That means two users sharing the same tfm will end up
affecting each other's output, or worse, they may end up with the
same output.
Fix this by declaring an internal state and storing the state there
instead of within the tfm context.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds code to the skcipher/lskcipher API to make use
of the internal state if present. In particular, the skcipher
lskcipher wrapper will allocate a buffer for the IV/state and
feed that to the underlying lskcipher algorithm.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Unlike chaining modes such as CBC, stream ciphers other than CTR
usually hold an internal state that must be preserved if the
operation is to be done piecemeal. This has not been represented
in the API, resulting in the inability to split up stream cipher
operations.
This patch adds the basic representation of an internal state to
skcipher and lskcipher. In the interest of backwards compatibility,
the default has been set such that existing users are assumed to
be operating in one go as opposed to piecemeal.
With the new API, each lskcipher/skcipher algorithm has a new
attribute called statesize. For skcipher, this is the size of
the buffer that can be exported or imported similar to ahash.
For lskcipher, instead of providing a buffer of ivsize, the user
now has to provide a buffer of ivsize + statesize.
Each skcipher operation is assumed to be final as they are now,
but this may be overridden with a request flag. When the override
occurs, the user may then export the partial state and reimport
it later.
For lskcipher operations this is reversed. All operations are
not final and the state will be exported unless the FINAL bit is
set. However, the CONT bit still has to be set for the state
to be used.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Having multiple in-flight AIO requests results in unpredictable
output because they all share the same IV. Fix this by only allowing
one request at a time.
Fixes: 83094e5e9e ("crypto: af_alg - add async support to algif_aead")
Fixes: a596999b7d ("crypto: algif - change algif_skcipher to be asynchronous")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
SP800-90C 3rd draft states that SHA-1 will be removed from all
specifications, including drbg by end of 2030. Given kernels built
today will be operating past that date, start complying with upcoming
requirements.
No functional change, as SHA-256 / SHA-512 based DRBG have always been
the preferred ones.
Signed-off-by: Dimitri John Ledkov <dimitri.ledkov@canonical.com>
Reviewed-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Update code comment, self test & healthcheck to use HMAC SHA512,
instead of HMAC SHA256. These changes are in dead-code, or FIPS
enabled code-paths only and have not effect on usual kernel builds.
On systems booting in FIPS mode that has the effect of switch sanity
selftest to HMAC sha512 based (which has been the default DRBG).
This patch updates code from 9b7b94683a ("crypto: DRBG - switch to
HMAC SHA512 DRBG as default DRBG"), but is not interesting to
cherry-pick for stable updates, because it doesn't affect regular
builds, nor has any tangible effect on FIPS certifcation.
Signed-off-by: Dimitri John Ledkov <dimitri.ledkov@canonical.com>
Reviewed-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When originally drbg was introduced FIPS self-checks for all types but
CTR were using the most preferred parameters for each type of
DRBG. Update CTR self-check to use aes256.
This patch updates code from 541af946fe ("crypto: drbg - SP800-90A
Deterministic Random Bit Generator"), but is not interesting to
cherry-pick for stable updates, because it doesn't affect regular
builds, nor has any tangible effect on FIPS certifcation.
Signed-off-by: Dimitri John Ledkov <dimitri.ledkov@canonical.com>
Reviewed-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
drbg supports multiple types of drbg, and multiple parameters of
each. Health check sanity only checks one drbg of a single type. One
can enable all three types of drbg. And instead of checking the most
preferred algorithm (last one wins), it is currently checking first
one instead.
Update ifdef to ensure that healthcheck prefers HMAC, over HASH, over
CTR, last one wins, like all other code and functions.
This patch updates code from 541af946fe ("crypto: drbg - SP800-90A
Deterministic Random Bit Generator"), but is not interesting to
cherry-pick for stable updates, because it doesn't affect regular
builds, nor has any tangible effect on FIPS certifcation.
Signed-off-by: Dimitri John Ledkov <dimitri.ledkov@canonical.com>
Reviewed-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Static checkers insist that the mpi_alloc() allocation can fail so add
a check to prevent a NULL dereference. Small allocations like this
can't actually fail in current kernels, but adding a check is very
simple and makes the static checkers happy.
Fixes: 6637e11e4a ("crypto: rsa - allow only odd e and restrict value in FIPS mode")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
EINPROGRESS and EBUSY have special meaning for async operations.
However, shash is always synchronous, so these statuses have no special
meaning for shash and don't need to be excluded when handling errors.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-----BEGIN PGP SIGNATURE-----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=ZfkT
-----END PGP SIGNATURE-----
Merge tag 'v6.7-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"This fixes a regression in ahash and hides the Kconfig sub-options for
the jitter RNG"
* tag 'v6.7-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: ahash - Set using_shash for cloned ahash wrapper over shash
crypto: jitterentropy - Hide esoteric Kconfig options under FIPS and EXPERT
As JITTERENTROPY is selected by default if you enable the CRYPTO
API, any Kconfig options added there will show up for every single
user. Hide the esoteric options under EXPERT as well as FIPS so
that only distro makers will see them.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
API:
- Add virtual-address based lskcipher interface.
- Optimise ahash/shash performance in light of costly indirect calls.
- Remove ahash alignmask attribute.
Algorithms:
- Improve AES/XTS performance of 6-way unrolling for ppc.
- Remove some uses of obsolete algorithms (md4, md5, sha1).
- Add FIPS 202 SHA-3 support in pkcs1pad.
- Add fast path for single-page messages in adiantum.
- Remove zlib-deflate.
Drivers:
- Add support for S4 in meson RNG driver.
- Add STM32MP13x support in stm32.
- Add hwrng interface support in qcom-rng.
- Add support for deflate algorithm in hisilicon/zip.
-----BEGIN PGP SIGNATURE-----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=IZmR
-----END PGP SIGNATURE-----
Merge tag 'v6.7-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Add virtual-address based lskcipher interface
- Optimise ahash/shash performance in light of costly indirect calls
- Remove ahash alignmask attribute
Algorithms:
- Improve AES/XTS performance of 6-way unrolling for ppc
- Remove some uses of obsolete algorithms (md4, md5, sha1)
- Add FIPS 202 SHA-3 support in pkcs1pad
- Add fast path for single-page messages in adiantum
- Remove zlib-deflate
Drivers:
- Add support for S4 in meson RNG driver
- Add STM32MP13x support in stm32
- Add hwrng interface support in qcom-rng
- Add support for deflate algorithm in hisilicon/zip"
* tag 'v6.7-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (283 commits)
crypto: adiantum - flush destination page before unmapping
crypto: testmgr - move pkcs1pad(rsa,sha3-*) to correct place
Documentation/module-signing.txt: bring up to date
module: enable automatic module signing with FIPS 202 SHA-3
crypto: asymmetric_keys - allow FIPS 202 SHA-3 signatures
crypto: rsa-pkcs1pad - Add FIPS 202 SHA-3 support
crypto: FIPS 202 SHA-3 register in hash info for IMA
x509: Add OIDs for FIPS 202 SHA-3 hash and signatures
crypto: ahash - optimize performance when wrapping shash
crypto: ahash - check for shash type instead of not ahash type
crypto: hash - move "ahash wrapping shash" functions to ahash.c
crypto: talitos - stop using crypto_ahash::init
crypto: chelsio - stop using crypto_ahash::init
crypto: ahash - improve file comment
crypto: ahash - remove struct ahash_request_priv
crypto: ahash - remove crypto_ahash_alignmask
crypto: gcm - stop using alignmask of ahash
crypto: chacha20poly1305 - stop using alignmask of ahash
crypto: ccm - stop using alignmask of ahash
net: ipv6: stop checking crypto_ahash_alignmask
...
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQQdXVVFGN5XqKr1Hj7LwZzRsCrn5QUCZUDyWhQcem9oYXJAbGlu
dXguaWJtLmNvbQAKCRDLwZzRsCrn5QtIAPwLSdHw2qix1A6lMhbRiXqFOWINHcTF
DMtZkiPmpeuTKAEA0KaXfddKq5OC5S/ixPEEZCVqOq2ixxfMDhudyoh/qQs=
=lh3g
-----END PGP SIGNATURE-----
Merge tag 'integrity-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity updates from Mimi Zohar:
"Four integrity changes: two IMA-overlay updates, an integrity Kconfig
cleanup, and a secondary keyring update"
* tag 'integrity-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: detect changes to the backing overlay file
certs: Only allow certs signed by keys on the builtin keyring
integrity: fix indentation of config attributes
ima: annotate iint mutex to avoid lockdep false positive warnings
Upon additional review, the new fast path in adiantum_finish() is
missing the call to flush_dcache_page() that scatterwalk_map_and_copy()
was doing. It's apparently debatable whether flush_dcache_page() is
actually needed, as per the discussion at
https://lore.kernel.org/lkml/YYP1lAq46NWzhOf0@casper.infradead.org/T/#u.
However, it appears that currently all the helper functions that write
to a page, such as scatterwalk_map_and_copy(), memcpy_to_page(), and
memzero_page(), do the dcache flush. So do it to be consistent.
Fixes: dadf5e56c9 ("crypto: adiantum - add fast path for single-page messages")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
alg_test_descs[] needs to be in sorted order, since it is used for
binary search. This fixes the following boot-time warning:
testmgr: alg_test_descs entries in wrong order: 'pkcs1pad(rsa,sha512)' before 'pkcs1pad(rsa,sha3-256)'
Fixes: ee62afb9d0 ("crypto: rsa-pkcs1pad - Add FIPS 202 SHA-3 support")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Dimitri John Ledkov <dimitri.ledkov@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Originally the secondary trusted keyring provided a keyring to which extra
keys may be added, provided those keys were not blacklisted and were
vouched for by a key built into the kernel or already in the secondary
trusted keyring.
On systems with the machine keyring configured, additional keys may also
be vouched for by a key on the machine keyring.
Prevent loading additional certificates directly onto the secondary
keyring, vouched for by keys on the machine keyring, yet allow these
certificates to be loaded onto other trusted keyrings.
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Add FIPS 202 SHA-3 hash signature support in x509 certificates, pkcs7
signatures, and authenticode signatures. Supports hashes of size 256
and up, as 224 is too weak for any practical purposes.
Signed-off-by: Dimitri John Ledkov <dimitri.ledkov@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support in rsa-pkcs1pad for FIPS 202 SHA-3 hashes, sizes 256 and
up. As 224 is too weak for any practical purposes.
Signed-off-by: Dimitri John Ledkov <dimitri.ledkov@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Register FIPS 202 SHA-3 hashes in hash info for IMA and other
users. Sizes 256 and up, as 224 is too weak for any practical
purposes.
Signed-off-by: Dimitri John Ledkov <dimitri.ledkov@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The "ahash" API provides access to both CPU-based and hardware offload-
based implementations of hash algorithms. Typically the former are
implemented as "shash" algorithms under the hood, while the latter are
implemented as "ahash" algorithms. The "ahash" API provides access to
both. Various kernel subsystems use the ahash API because they want to
support hashing hardware offload without using a separate API for it.
Yet, the common case is that a crypto accelerator is not actually being
used, and ahash is just wrapping a CPU-based shash algorithm.
This patch optimizes the ahash API for that common case by eliminating
the extra indirect call for each ahash operation on top of shash.
It also fixes the double-counting of crypto stats in this scenario
(though CONFIG_CRYPTO_STATS should *not* be enabled by anyone interested
in performance anyway...), and it eliminates redundant checking of
CRYPTO_TFM_NEED_KEY. As a bonus, it also shrinks struct crypto_ahash.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since the previous patch made crypto_shash_type visible to ahash.c,
change checks for '->cra_type != &crypto_ahash_type' to '->cra_type ==
&crypto_shash_type'. This makes more sense and avoids having to
forward-declare crypto_ahash_type. The result is still the same, since
the type is either shash or ahash here.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The functions that are involved in implementing the ahash API on top of
an shash algorithm belong better in ahash.c, not in shash.c where they
currently are. Move them.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
struct ahash_request_priv is unused, so remove it.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that the alignmask for ahash and shash algorithms is always 0,
simplify crypto_gcm_create_common() accordingly.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that the alignmask for ahash and shash algorithms is always 0,
simplify chachapoly_create() accordingly.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that the alignmask for ahash and shash algorithms is always 0,
simplify crypto_ccm_create_common() accordingly.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that the alignmask for ahash and shash algorithms is always 0,
crypto_ahash_alignmask() always returns 0 and will be removed. In
preparation for this, stop checking crypto_ahash_alignmask() in testmgr.
As a result of this change,
test_sg_division::offset_relative_to_alignmask and
testvec_config::key_offset_relative_to_alignmask no longer have any
effect on ahash (or shash) algorithms. Therefore, also stop setting
these flags in default_hash_testvec_configs[].
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that the alignmask for ahash and shash algorithms is always 0,
simplify the code in authenc accordingly.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that the alignmask for ahash and shash algorithms is always 0,
simplify the code in authenc accordingly.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently, the ahash API checks the alignment of all key and result
buffers against the algorithm's declared alignmask, and for any
unaligned buffers it falls back to manually aligned temporary buffers.
This is virtually useless, however. First, since it does not apply to
the message, its effect is much more limited than e.g. is the case for
the alignmask for "skcipher". Second, the key and result buffers are
given as virtual addresses and cannot (in general) be DMA'ed into, so
drivers end up having to copy to/from them in software anyway. As a
result it's easy to use memcpy() or the unaligned access helpers.
The crypto_hash_walk_*() helper functions do use the alignmask to align
the message. But with one exception those are only used for shash
algorithms being exposed via the ahash API, not for native ahashes, and
aligning the message is not required in this case, especially now that
alignmask support has been removed from shash. The exception is the
n2_core driver, which doesn't set an alignmask.
In any case, no ahash algorithms actually set a nonzero alignmask
anymore. Therefore, remove support for it from ahash. The benefit is
that all the code to handle "misaligned" buffers in the ahash API goes
away, reducing the overhead of the ahash API.
This follows the same change that was made to shash.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Per section 4.c. of the IETF Trust Legal Provisions, "Code Components"
in IETF Documents are licensed on the terms of the BSD-3-Clause license:
https://trustee.ietf.org/documents/trust-legal-provisions/tlp-5/
The term "Code Components" specifically includes ASN.1 modules:
https://trustee.ietf.org/documents/trust-legal-provisions/code-components-list-3/
Add an SPDX identifier as well as a copyright notice pursuant to section
6.d. of the Trust Legal Provisions to all ASN.1 modules in the tree
which are derived from IETF Documents.
Section 4.d. of the Trust Legal Provisions requests that each Code
Component identify the RFC from which it is taken, so link that RFC
in every ASN.1 module.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The health test result in the current code is only given for the currently
processed raw time stamp. This implies to react on the health test error,
the result must be checked after each raw time stamp being processed. To
avoid this constant checking requirement, any health test error is recorded
and stored to be analyzed at a later time, if needed.
This change ensures that the power-up test catches any health test error.
Without that patch, the power-up health test result is not enforced.
The introduced changes are already in use with the user space version of
the Jitter RNG.
Fixes: 04597c8dd6 ("jitter - add RCT/APT support for different OSRs")
Reported-by: Joachim Vandersmissen <git@jvdsn.com>
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that the shash algorithm type does not support nonzero alignmasks,
shash_alg::base.cra_alignmask is always 0, so OR-ing it into another
value is a no-op.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that the shash algorithm type does not support nonzero alignmasks,
shash_alg::base.cra_alignmask is always 0, so OR-ing it into another
value is a no-op.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that the shash algorithm type does not support nonzero alignmasks,
crypto_shash_alignmask() always returns 0 and will be removed. In
preparation for this, stop checking crypto_shash_alignmask() in testmgr.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that the shash algorithm type does not support nonzero alignmasks,
crypto_shash_alignmask() always returns 0 and will be removed. In
preparation for this, stop checking crypto_shash_alignmask() in drbg.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently, the shash API checks the alignment of all message, key, and
digest buffers against the algorithm's declared alignmask, and for any
unaligned buffers it falls back to manually aligned temporary buffers.
This is virtually useless, however. In the case of the message buffer,
cryptographic hash functions internally operate on fixed-size blocks, so
implementations end up needing to deal with byte-aligned data anyway
because the length(s) passed to ->update might not be divisible by the
block size. Word-alignment of the message can theoretically be helpful
for CRCs, like what was being done in crc32c-sparc64. But in practice
it's better for the algorithms to use unaligned accesses or align the
message themselves. A similar argument applies to the key and digest.
In any case, no shash algorithms actually set a nonzero alignmask
anymore. Therefore, remove support for it from shash. The benefit is
that all the code to handle "misaligned" buffers in the shash API goes
away, reducing the overhead of the shash API.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The xcbc template is setting its alignmask to that of its underlying
'cipher'. Yet, it doesn't care itself about how its inputs and outputs
are aligned, which is ostensibly the point of the alignmask. Instead,
xcbc actually just uses its alignmask itself to runtime-align certain
fields in its tfm and desc contexts appropriately for its underlying
cipher. That is almost entirely pointless too, though, since xcbc is
already using the cipher API functions that handle alignment themselves,
and few ciphers set a nonzero alignmask anyway. Also, even without
runtime alignment, an alignment of at least 4 bytes can be guaranteed.
Thus, at best this code is optimizing for the rare case of ciphers that
set an alignmask >= 7, at the cost of hurting the common cases.
Therefore, this patch removes the manual alignment code from xcbc and
makes it stop setting an alignmask.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The vmac template is setting its alignmask to that of its underlying
'cipher'. This doesn't actually accomplish anything useful, though, so
stop doing it. (vmac_update() does have an alignment bug, where it
assumes u64 alignment when it shouldn't, but that bug exists both before
and after this patch.) This is a prerequisite for removing support for
nonzero alignmasks from shash.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The hmac template is setting its alignmask to that of its underlying
unkeyed hash algorithm, and it is aligning the ipad and opad fields in
its tfm context to that alignment. However, hmac does not actually need
any sort of alignment itself, which makes this pointless except to keep
the pads aligned to what the underlying algorithm prefers. But very few
shash algorithms actually set an alignmask, and it is being removed from
those remaining ones; also, after setkey, the pads are only passed to
crypto_shash_import and crypto_shash_export which ignore the alignmask.
Therefore, make the hmac template stop setting an alignmask and simply
use natural alignment for ipad and opad. Note, this change also moves
the pads from the beginning of the tfm context to the end, which makes
much more sense; the variable-length fields should be at the end.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The cmac template is setting its alignmask to that of its underlying
'cipher'. Yet, it doesn't care itself about how its inputs and outputs
are aligned, which is ostensibly the point of the alignmask. Instead,
cmac actually just uses its alignmask itself to runtime-align certain
fields in its tfm and desc contexts appropriately for its underlying
cipher. That is almost entirely pointless too, though, since cmac is
already using the cipher API functions that handle alignment themselves,
and few ciphers set a nonzero alignmask anyway. Also, even without
runtime alignment, an alignment of at least 4 bytes can be guaranteed.
Thus, at best this code is optimizing for the rare case of ciphers that
set an alignmask >= 7, at the cost of hurting the common cases.
Therefore, this patch removes the manual alignment code from cmac and
makes it stop setting an alignmask.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The cbcmac template is aligning a field in its desc context to the
alignmask of its underlying 'cipher', at runtime. This is almost
entirely pointless, since cbcmac is already using the cipher API
functions that handle alignment themselves, and few ciphers set a
nonzero alignmask anyway. Also, even without runtime alignment, an
alignment of at least 4 bytes can be guaranteed.
Thus, at best this code is optimizing for the rare case of ciphers that
set an alignmask >= 7, at the cost of hurting the common cases.
Therefore, remove the manual alignment code from cbcmac.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Most shash algorithms don't have custom ->import and ->export functions,
resulting in the memcpy() based default being used. Yet,
crypto_shash_import() and crypto_shash_export() still make an indirect
call, which is expensive. Therefore, change how the default import and
export are called to make it so that crypto_shash_import() and
crypto_shash_export() don't do an indirect call in this case.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The modular build fails because the self-test code depends on pkcs7
which in turn depends on x509 which contains the self-test.
Split the self-test out into its own module to break the cycle.
Fixes: 3cde3174eb ("certs: Add FIPS selftests")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When an algorithm of the new "lskcipher" type is exposed through the
"skcipher" API, calls to crypto_skcipher_setkey() don't pass on the
CRYPTO_TFM_REQ_FORBID_WEAK_KEYS flag to the lskcipher. This causes
self-test failures for ecb(des), as weak keys are not rejected anymore.
Fix this.
Fixes: 31865c4c4d ("crypto: skcipher - Add lskcipher")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Set the error value to -EINVAL instead of zero when the underlying
name (within "ecb()") fails basic sanity checks.
Fixes: 8aee5d4ebd ("crypto: lskcipher - Add compatibility wrapper around ECB")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202310111323.ZjK7bzjw-lkp@intel.com/
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
It is possible to stand up own certificates and sign PE-COFF binaries
using SHA-224. However it never became popular or needed since it has
similar costs as SHA-256. Windows Authenticode infrastructure never
had support for SHA-224, and all secureboot keys used fro linux
vmlinuz have always been using at least SHA-256.
Given the point of mscode_parser is to support interoperatiblity with
typical de-facto hashes, remove support for SHA-224 to avoid
posibility of creating interoperatibility issues with rhboot/shim,
grub, and non-linux systems trying to sign or verify vmlinux.
SHA-224 itself is not removed from the kernel, as it is truncated
SHA-256. If requested I can write patches to remove SHA-224 support
across all of the drivers.
Signed-off-by: Dimitri John Ledkov <dimitri.ledkov@canonical.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Removes support for sha1 signed kernel modules, importing sha1 signed
x.509 certificates.
rsa-pkcs1pad keeps sha1 padding support, which seems to be used by
virtio driver.
sha1 remains available as there are many drivers and subsystems using
it. Note only hmac(sha1) with secret keys remains cryptographically
secure.
In the kernel there are filesystems, IMA, tpm/pcr that appear to be
using sha1. Maybe they can all start to be slowly upgraded to
something else i.e. blake3, ParallelHash, SHAKE256 as needed.
Signed-off-by: Dimitri John Ledkov <dimitri.ledkov@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When the source scatterlist is a single page, optimize the first hash
step of adiantum to use crypto_shash_digest() instead of
init/update/final, and use the same local kmap for both hashing the bulk
part and loading the narrow part of the source data.
Likewise, when the destination scatterlist is a single page, optimize
the second hash step of adiantum to use crypto_shash_digest() instead of
init/update/final, and use the same local kmap for both hashing the bulk
part and storing the narrow part of the destination data.
In some cases these optimizations improve performance significantly.
Note: ideally, for optimal performance each architecture should
implement the full "adiantum(xchacha12,aes)" algorithm and fully
optimize the contiguous buffer case to use no indirect calls. That's
not something I've gotten around to doing, though. This commit just
makes a relatively small change that provides some benefit with the
existing template-based approach.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fold shash_digest_unaligned() into its only remaining caller. Also,
avoid a redundant check of CRYPTO_TFM_NEED_KEY by replacing the call to
crypto_shash_init() with shash->init(desc). Finally, replace
shash_update_unaligned() + shash_final_unaligned() with
shash_finup_unaligned() which does exactly that.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
