mirror of
https://github.com/torvalds/linux.git
synced 2024-11-10 14:11:52 +00:00
master
15 Commits
Author | SHA1 | Message | Date | |
---|---|---|---|---|
Linus Torvalds
|
2c9b351240 |
ARM:
* Initial infrastructure for shadow stage-2 MMUs, as part of nested virtualization enablement * Support for userspace changes to the guest CTR_EL0 value, enabling (in part) migration of VMs between heterogenous hardware * Fixes + improvements to pKVM's FF-A proxy, adding support for v1.1 of the protocol * FPSIMD/SVE support for nested, including merged trap configuration and exception routing * New command-line parameter to control the WFx trap behavior under KVM * Introduce kCFI hardening in the EL2 hypervisor * Fixes + cleanups for handling presence/absence of FEAT_TCRX * Miscellaneous fixes + documentation updates LoongArch: * Add paravirt steal time support. * Add support for KVM_DIRTY_LOG_INITIALLY_SET. * Add perf kvm-stat support for loongarch. RISC-V: * Redirect AMO load/store access fault traps to guest * perf kvm stat support * Use guest files for IMSIC virtualization, when available ONE_REG support for the Zimop, Zcmop, Zca, Zcf, Zcd, Zcb and Zawrs ISA extensions is coming through the RISC-V tree. s390: * Assortment of tiny fixes which are not time critical x86: * Fixes for Xen emulation. * Add a global struct to consolidate tracking of host values, e.g. EFER * Add KVM_CAP_X86_APIC_BUS_CYCLES_NS to allow configuring the effective APIC bus frequency, because TDX. * Print the name of the APICv/AVIC inhibits in the relevant tracepoint. * Clean up KVM's handling of vendor specific emulation to consistently act on "compatible with Intel/AMD", versus checking for a specific vendor. * Drop MTRR virtualization, and instead always honor guest PAT on CPUs that support self-snoop. * Update to the newfangled Intel CPU FMS infrastructure. * Don't advertise IA32_PERF_GLOBAL_OVF_CTRL as an MSR-to-be-saved, as it reads '0' and writes from userspace are ignored. * Misc cleanups x86 - MMU: * Small cleanups, renames and refactoring extracted from the upcoming Intel TDX support. * Don't allocate kvm_mmu_page.shadowed_translation for shadow pages that can't hold leafs SPTEs. * Unconditionally drop mmu_lock when allocating TDP MMU page tables for eager page splitting, to avoid stalling vCPUs when splitting huge pages. * Bug the VM instead of simply warning if KVM tries to split a SPTE that is non-present or not-huge. KVM is guaranteed to end up in a broken state because the callers fully expect a valid SPTE, it's all but dangerous to let more MMU changes happen afterwards. x86 - AMD: * Make per-CPU save_area allocations NUMA-aware. * Force sev_es_host_save_area() to be inlined to avoid calling into an instrumentable function from noinstr code. * Base support for running SEV-SNP guests. API-wise, this includes a new KVM_X86_SNP_VM type, encrypting/measure the initial image into guest memory, and finalizing it before launching it. Internally, there are some gmem/mmu hooks needed to prepare gmem-allocated pages before mapping them into guest private memory ranges. This includes basic support for attestation guest requests, enough to say that KVM supports the GHCB 2.0 specification. There is no support yet for loading into the firmware those signing keys to be used for attestation requests, and therefore no need yet for the host to provide certificate data for those keys. To support fetching certificate data from userspace, a new KVM exit type will be needed to handle fetching the certificate from userspace. An attempt to define a new KVM_EXIT_COCO/KVM_EXIT_COCO_REQ_CERTS exit type to handle this was introduced in v1 of this patchset, but is still being discussed by community, so for now this patchset only implements a stub version of SNP Extended Guest Requests that does not provide certificate data. x86 - Intel: * Remove an unnecessary EPT TLB flush when enabling hardware. * Fix a series of bugs that cause KVM to fail to detect nested pending posted interrupts as valid wake eents for a vCPU executing HLT in L2 (with HLT-exiting disable by L1). * KVM: x86: Suppress MMIO that is triggered during task switch emulation Explicitly suppress userspace emulated MMIO exits that are triggered when emulating a task switch as KVM doesn't support userspace MMIO during complex (multi-step) emulation. Silently ignoring the exit request can result in the WARN_ON_ONCE(vcpu->mmio_needed) firing if KVM exits to userspace for some other reason prior to purging mmio_needed. See commit |
||
Michael Roth
|
332d2c1d71 |
crypto: ccp: Add the SNP_VLEK_LOAD command
When requesting an attestation report a guest is able to specify whether it wants SNP firmware to sign the report using either a Versioned Chip Endorsement Key (VCEK), which is derived from chip-unique secrets, or a Versioned Loaded Endorsement Key (VLEK) which is obtained from an AMD Key Derivation Service (KDS) and derived from seeds allocated to enrolled cloud service providers (CSPs). For VLEK keys, an SNP_VLEK_LOAD SNP firmware command is used to load them into the system after obtaining them from the KDS. Add a corresponding userspace interface so to allow the loading of VLEK keys into the system. See SEV-SNP Firmware ABI 1.54, SNP_VLEK_LOAD for more details. Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Michael Roth <michael.roth@amd.com> Message-ID: <20240501085210.2213060-21-michael.roth@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
Tom Lendacky
|
eb65f96cb3 |
virt: sev-guest: Choose the VMPCK key based on executing VMPL
Currently, the sev-guest driver uses the vmpck-0 key by default. When an SVSM is present, the kernel is running at a VMPL other than 0 and the vmpck-0 key is no longer available. If a specific vmpck key has not be requested by the user via the vmpck_id module parameter, choose the vmpck key based on the active VMPL level. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/b88081c5d88263176849df8ea93e90a404619cab.1717600736.git.thomas.lendacky@amd.com |
||
Michael Roth
|
1bfca8d280 |
Documentation: virt: Fix up pre-formatted text block for SEV ioctls
A missing newline after "::" resulted in the htmldocs build failing to
recognize the start of a pre-formatted block of text, resulting in
kernel/linux/Documentation/virt/coco/sev-guest.rst:75: WARNING: Inline emphasis start-string without end-string.
kernel/linux/Documentation/virt/coco/sev-guest.rst:78: WARNING: Inline emphasis start-string without end-string.
kernel/linux/Documentation/virt/coco/sev-guest.rst:81: WARNING: Inline emphasis start-string without end-string.
kernel/linux/Documentation/virt/coco/sev-guest.rst:83: WARNING: Definition list ends without a blank line; unexpected unindent.
Fix it.
Fixes:
|
||
Brijesh Singh
|
cb645fe478 |
crypto: ccp: Add the SNP_SET_CONFIG command
The SEV-SNP firmware provides the SNP_CONFIG command used to set various system-wide configuration values for SNP guests, such as the reported TCB version used when signing guest attestation reports. Add an interface to set this via userspace. [ mdr: Squash in doc patch from Dionna, drop extended request/ certificate handling and simplify this to a simple wrapper around SNP_CONFIG fw cmd. ] Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Co-developed-by: Alexey Kardashevskiy <aik@amd.com> Signed-off-by: Alexey Kardashevskiy <aik@amd.com> Co-developed-by: Dionna Glaze <dionnaglaze@google.com> Signed-off-by: Dionna Glaze <dionnaglaze@google.com> Signed-off-by: Ashish Kalra <ashish.kalra@amd.com> Signed-off-by: Michael Roth <michael.roth@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20240126041126.1927228-26-michael.roth@amd.com |
||
Tom Lendacky
|
fad133c79a |
crypto: ccp: Add the SNP_COMMIT command
The SNP_COMMIT command is used to commit the currently installed version of the SEV firmware. Once committed, the firmware cannot be replaced with a previous firmware version (cannot be rolled back). This command will also update the reported TCB to match that of the currently installed firmware. [ mdr: Note the reported TCB update in the documentation/commit. ] Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Michael Roth <michael.roth@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20240126041126.1927228-25-michael.roth@amd.com |
||
Brijesh Singh
|
f5db8841eb |
crypto: ccp: Add the SNP_PLATFORM_STATUS command
This command is used to query the SNP platform status. See the SEV-SNP spec for more details. Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Ashish Kalra <ashish.kalra@amd.com> Signed-off-by: Michael Roth <michael.roth@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20240126041126.1927228-24-michael.roth@amd.com |
||
Dionna Glaze
|
0144e3b85d |
x86/sev: Change snp_guest_issue_request()'s fw_err argument
The GHCB specification declares that the firmware error value for a guest request will be stored in the lower 32 bits of EXIT_INFO_2. The upper 32 bits are for the VMM's own error code. The fw_err argument to snp_guest_issue_request() is thus a misnomer, and callers will need access to all 64 bits. The type of unsigned long also causes problems, since sw_exit_info2 is u64 (unsigned long long) vs the argument's unsigned long*. Change this type for issuing the guest request. Pass the ioctl command struct's error field directly instead of in a local variable, since an incomplete guest request may not set the error code, and uninitialized stack memory would be written back to user space. The firmware might not even be called, so bookend the call with the no firmware call error and clear the error. Since the "fw_err" field is really exitinfo2 split into the upper bits' vmm error code and lower bits' firmware error code, convert the 64 bit value to a union. [ bp: - Massage commit message - adjust code - Fix a build issue as Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202303070609.vX6wp2Af-lkp@intel.com - print exitinfo2 in hex Tom: - Correct -EIO exit case. ] Signed-off-by: Dionna Glaze <dionnaglaze@google.com> Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20230214164638.1189804-5-dionnaglaze@google.com Link: https://lore.kernel.org/r/20230307192449.24732-12-bp@alien8.de |
||
Peter Gonda
|
efb339a833 |
crypto: ccp - Name -1 return value as SEV_RET_NO_FW_CALL
The PSP can return a "firmware error" code of -1 in circumstances where the PSP has not actually been called. To make this protocol unambiguous, name the value SEV_RET_NO_FW_CALL. [ bp: Massage a bit. ] Signed-off-by: Peter Gonda <pgonda@google.com> Signed-off-by: Dionna Glaze <dionnaglaze@google.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20221207010210.2563293-2-dionnaglaze@google.com |
||
Kuppuswamy Sathyanarayanan
|
6c8c1406a6 |
virt: Add TDX guest driver
TDX guest driver exposes IOCTL interfaces to service TDX guest user-specific requests. Currently, it is only used to allow the user to get the TDREPORT to support TDX attestation. Details about the TDX attestation process are documented in Documentation/x86/tdx.rst, and the IOCTL details are documented in Documentation/virt/coco/tdx-guest.rst. Operations like getting TDREPORT involves sending a blob of data as input and getting another blob of data as output. It was considered to use a sysfs interface for this, but it doesn't fit well into the standard sysfs model for configuring values. It would be possible to do read/write on files, but it would need multiple file descriptors, which would be somewhat messy. IOCTLs seem to be the best fitting and simplest model for this use case. The AMD sev-guest driver also uses the IOCTL interface to support attestation. [Bagas Sanjaya: Ack is for documentation portion] Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com> Reviewed-by: Tony Luck <tony.luck@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Kai Huang <kai.huang@intel.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Wander Lairson Costa <wander@redhat.com> Link: https://lore.kernel.org/all/20221116223820.819090-3-sathyanarayanan.kuppuswamy%40linux.intel.com |
||
Tom Lendacky
|
d63670d23e |
virt: sevguest: Rename the sevguest dir and files to sev-guest
Rename the drivers/virt/coco/sevguest directory and files to sev-guest so as to match the driver name. [ bp: Rename Documentation/virt/coco/sevguest.rst too, as reported by sfr: https://lore.kernel.org/r/20220427101059.3bf55262@canb.auug.org.au ] Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lore.kernel.org/r/2f5c9cb16e3a67599c8e3170f6c72c8712c47d53.1650464054.git.thomas.lendacky@amd.com |
||
Michael Roth
|
92a99584d9 |
virt: sevguest: Add documentation for SEV-SNP CPUID Enforcement
Update the documentation with information regarding SEV-SNP CPUID Enforcement details and what sort of assurances it provides to guests. Signed-off-by: Michael Roth <michael.roth@amd.com> Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lore.kernel.org/r/20220307213356.2797205-47-brijesh.singh@amd.com |
||
Brijesh Singh
|
d80b494f71 |
virt: sevguest: Add support to get extended report
Version 2 of GHCB specification defines Non-Automatic-Exit (NAE) to get extended guest report which is similar to the SNP_GET_REPORT ioctl. The main difference is related to the additional data that will be returned. That additional data returned is a certificate blob that can be used by the SNP guest user. The certificate blob layout is defined in the GHCB specification. The driver simply treats the blob as a opaque data and copies it to userspace. [ bp: Massage commit message, cast 1st arg of access_ok() ] Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lore.kernel.org/r/20220307213356.2797205-46-brijesh.singh@amd.com |
||
Brijesh Singh
|
68de0b2f93 |
virt: sevguest: Add support to derive key
The SNP_GET_DERIVED_KEY ioctl interface can be used by the SNP guest to ask the firmware to provide a key derived from a root key. The derived key may be used by the guest for any purposes it chooses, such as a sealing key or communicating with the external entities. See SEV-SNP firmware spec for more information. [ bp: No need to memset "req" - it will get overwritten. ] Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Liam Merwick <liam.merwick@oracle.com> Link: https://lore.kernel.org/r/20220307213356.2797205-45-brijesh.singh@amd.com |
||
Brijesh Singh
|
fce96cf044 |
virt: Add SEV-SNP guest driver
The SEV-SNP specification provides the guest a mechanism to communicate with the PSP without risk from a malicious hypervisor who wishes to read, alter, drop or replay the messages sent. The driver uses snp_issue_guest_request() to issue GHCB SNP_GUEST_REQUEST or SNP_EXT_GUEST_REQUEST NAE events to submit the request to PSP. The PSP requires that all communication should be encrypted using key specified through a struct snp_guest_platform_data descriptor. Userspace can use SNP_GET_REPORT ioctl() to query the guest attestation report. See SEV-SNP spec section Guest Messages for more details. [ bp: Remove the "what" from the commit message, massage. ] Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lore.kernel.org/r/20220307213356.2797205-44-brijesh.singh@amd.com |