The description of PDU1 format usage mistakenly referred to PDU2 format.
Signed-off-by: Alexander Hölzl <alexander.hoelzl@gmx.net>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/20241023145257.82709-1-alexander.hoelzl@gmx.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The original link returns 404 now. This commit replaces the dead google
site link with archive.org link.
Signed-off-by: Levi Zim <rsworktech@outlook.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20241021-packet_mmap_fix_link-v1-1-dffae4a174c0@outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix multiple grammatical issues and add a missing period to improve
readability.
Signed-off-by: Leo Stone <leocstone@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240929005001.370991-1-leocstone@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit 8380c81d5c ("net: Treat __napi_schedule_irqoff() as
__napi_schedule() on PREEMPT_RT"), napi_schedule_irqoff will do the
right thing if IRQs are threaded. Therefore, there is no need to use
IRQF_NO_THREAD.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20240930153955.971657-1-sean.anderson@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The iptables example was added in commit d2f26037a3 (netfilter: Add
documentation for tproxy, 2008-10-08), but xt_socket 'transparent'
option was added in commit a31e1ffd22 (netfilter: xt_socket: added new
revision of the 'socket' match supporting flags, 2009-06-09).
Now add the 'transparent' option to the iptables example to ignore
non-transparent sockets, which is also consistent with the nft example.
Signed-off-by: 谢致邦 (XIE Zhibang) <Yeking@Red54.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Fix a missing end of phrase in the documentation. It describes the
ETHTOOL_A_C33_PSE_ACTUAL_PW attribute, which was not fully explained.
Also, fix grammar issues by using simple present tense instead of
present continuous.
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240912090550.743174-1-kory.maincent@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When SHAMPO can't identify the protocol/header of a packet, it will
yield a packet that is not split - all the packet is in the data part.
Count this value in packets and bytes.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20240911201757.1505453-15-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ENA Express metrics, called `ena_srd` are exposed to
customers via `ethtool`.
The metrics allow customers to check the configuration
(mode), tx/rx counters as well as resource utilization.
The documentation is also updated to provide a general
explanation about ENA Express as well as links for further
information about metrics and configurations.
Signed-off-by: Igor Chauskin <igorch@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Link: https://patch.msgid.link/20240909084704.13856-2-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The IEEE 802.3cg project defines two 10 Mbit/s PHYs operating over a
single pair of conductors. The 10BASE-T1L (Clause 146) is a long reach
PHY supporting full duplex point-to-point operation over 1 km of single
balanced pair of conductors. The 10BASE-T1S (Clause 147) is a short reach
PHY supporting full / half duplex point-to-point operation over 15 m of
single balanced pair of conductors, or half duplex multidrop bus
operation over 25 m of single balanced pair of conductors.
Furthermore, the IEEE 802.3cg project defines the new Physical Layer
Collision Avoidance (PLCA) Reconciliation Sublayer (Clause 148) meant to
provide improved determinism to the CSMA/CD media access method. PLCA
works in conjunction with the 10BASE-T1S PHY operating in multidrop mode.
The aforementioned PHYs are intended to cover the low-speed / low-cost
applications in industrial and automotive environment. The large number
of pins (16) required by the MII interface, which is specified by the
IEEE 802.3 in Clause 22, is one of the major cost factors that need to be
addressed to fulfil this objective.
The MAC-PHY solution integrates an IEEE Clause 4 MAC and a 10BASE-T1x PHY
exposing a low pin count Serial Peripheral Interface (SPI) to the host
microcontroller. This also enables the addition of Ethernet functionality
to existing low-end microcontrollers which do not integrate a MAC
controller.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Parthiban Veerasooran <Parthiban.Veerasooran@microchip.com>
Link: https://patch.msgid.link/20240909082514.262942-2-Parthiban.Veerasooran@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add documentation outlining the usage and details of devmem TCP.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20240910171458.219195-12-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
An MPTCP firewall blackhole can be detected if the following SYN
retransmission after a fallback to "plain" TCP is accepted.
In case of blackhole, a similar technique to the one in place with TFO
is now used: MPTCP can be disabled for a certain period of time, 1h by
default. This time period will grow exponentially when more blackhole
issues get detected right after MPTCP is re-enabled and will reset to
the initial value when the blackhole issue goes away.
The blackhole period can be modified thanks to a new sysctl knob:
blackhole_timeout. Two new MIB counters help understanding what's
happening:
- 'Blackhole', incremented when a blackhole is detected.
- 'MPCapableSYNTXDisabled', incremented when an MPTCP connection
directly falls back to TCP during the blackhole period.
Because the technique is inspired by the one used by TFO, an important
part of the new code is similar to what can find in tcp_fastopen.c, with
some adaptations to the MPTCP case.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/57
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240909-net-next-mptcp-fallback-x-mpc-v1-3-da7ebb4cd2a3@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
HW-Managed Flow Steering in mlx5 driver
Yevgeny Kliteynik says:
=======================
1. Overview
-----------
ConnectX devices support packet matching, modification, and redirection.
This functionality is referred as Flow Steering.
To configure a steering rule, the rule is written to the device-owned
memory. This memory is accessed and cached by the device when processing
a packet.
The first implementation of Flow Steering was done in FW, and it is
referred in the mlx5 driver as Device-Managed Flow Steering (DMFS).
Later we introduced SW-managed Flow Steering (SWS or SMFS), where the
driver is writing directly to the device's configuration memory (ICM)
through RC QP using RDMA operations (RDMA-read and RDAM-write), thus
achieving higher rates of rule insertion/deletion.
Now we introduce a new flow steering implementation: HW-Managed Flow
Steering (HWS or HMFS).
In this new approach, the driver is configuring steering rules directly
to the HW using the WQs with a special new type of WQE. This way we can
reach higher rule insertion/deletion rate with much lower CPU utilization
compared to SWS.
The key benefits of HWS as opposed to SWS:
+ HW manages the steering decision tree
- HW calculates CRC for each entry
- HW handles tree hash collisions
- HW & FW manage objects refcount
+ HW keeps cache coherency:
- HW provides tree access locking and synchronization
- HW provides notification on completion
+ Insertion rate isn’t affected by background traffic
- Dedicated HW components that handle insertion
2. Performance
--------------
Measuring Connection Tracking with simple IPv4 flows w/o NAT, we
are able to get ~5 times more flows offloaded per second using HWS.
3. Configuration
----------------
The enablement of HWS mode in eswitch manager is done using the same
devlink param that is already used for switching between FW-managed
steering and SW-managed steering modes:
# devlink dev param set pci/<PCI_ID> name flow_steering_mode cmod runtime value hmfs
4. Upstream Submission
----------------------
HWS support consists of 3 main components:
+ Steering:
- The lower layer that exposes HWS API to upper layers and implements
all the management of flow steering building blocks
+ FS-Core
- Implementation of fs_hws layer to enable fs_core to use HWS instead
of FW or SW steering
- Create HW steering action pools to utilize the ability of HWS to
share steering actions among different rules
- Add support for configuring HWS mode through devlink command,
similar to configuring SWS mode
+ Connection Tracking
- Implementation of CT support for HW steering
- Hooks up the CT ops for the new steering mode and uses the HWS API
to implement connection tracking.
Because of the large number of patches, we need to perform the submission
in several separate patch series. This series is the first submission that
lays the ground work for the next submissions, where an actual user of HWS
will be added.
5. Patches in this series
-------------------------
This patch series contains implementation of the first bullet from above.
The patches are:
[patch 01/15] net/mlx5: Added missing mlx5_ifc definition for HW Steering
[patch 02/15] net/mlx5: Added missing definitions in preparation for HW Steering
[patch 03/15] net/mlx5: HWS, added actions handling
[patch 04/15] net/mlx5: HWS, added tables handling
[patch 05/15] net/mlx5: HWS, added rules handling
[patch 06/15] net/mlx5: HWS, added definers handling
[patch 07/15] net/mlx5: HWS, added matchers functionality
[patch 08/15] net/mlx5: HWS, added FW commands handling
[patch 09/15] net/mlx5: HWS, added modify header pattern and args handling
[patch 10/15] net/mlx5: HWS, added vport handling
[patch 11/15] net/mlx5: HWS, added memory management handling
[patch 12/15] net/mlx5: HWS, added backward-compatible API handling
[patch 13/15] net/mlx5: HWS, added debug dump and internal headers
[patch 14/15] net/mlx5: HWS, added send engine and context handling
[patch 15/15] net/mlx5: HWS, added API and enabled HWS support
=======================
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmbfOf4ACgkQSD+KveBX
+j7hWgf/UzlKp8uyqb+7MpMWP6EgT8WUwWdpDfAr1jubIFz7e+VGaA/7QCThe89u
alcgYvIDQCGrpB/0qXY+kaKPvqOej2wPCiLU7K2JB5y20pZ/RATlFuFBZjsMzufJ
7NxzZgTPUDz+8OWK0mm0LxEJRJYoJ69gAnR0jvLGx9uSjv/f9lNICvWBaI58hkzb
HJa6sJNBiFj4EnkipxWCP0GQ4dddMkgCIVYb91FtlBA4SGZtmPS35NqQJKtGnKF3
ZhZuaTeRdw8bFDJnhbu0ur9cs4EUorZE5QBWhoHYN0zFZF4JmqCCC1HvCS7LEKaU
PgtREk20H2jPIRFwQuX05D6M4zSizg==
=AsB3
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2024-09-02' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2024-08-29
HW-Managed Flow Steering in mlx5 driver
Yevgeny Kliteynik says:
=======================
1. Overview
-----------
ConnectX devices support packet matching, modification, and redirection.
This functionality is referred as Flow Steering.
To configure a steering rule, the rule is written to the device-owned
memory. This memory is accessed and cached by the device when processing
a packet.
The first implementation of Flow Steering was done in FW, and it is
referred in the mlx5 driver as Device-Managed Flow Steering (DMFS).
Later we introduced SW-managed Flow Steering (SWS or SMFS), where the
driver is writing directly to the device's configuration memory (ICM)
through RC QP using RDMA operations (RDMA-read and RDAM-write), thus
achieving higher rates of rule insertion/deletion.
Now we introduce a new flow steering implementation: HW-Managed Flow
Steering (HWS or HMFS).
In this new approach, the driver is configuring steering rules directly
to the HW using the WQs with a special new type of WQE. This way we can
reach higher rule insertion/deletion rate with much lower CPU utilization
compared to SWS.
The key benefits of HWS as opposed to SWS:
+ HW manages the steering decision tree
- HW calculates CRC for each entry
- HW handles tree hash collisions
- HW & FW manage objects refcount
+ HW keeps cache coherency:
- HW provides tree access locking and synchronization
- HW provides notification on completion
+ Insertion rate isn’t affected by background traffic
- Dedicated HW components that handle insertion
2. Performance
--------------
Measuring Connection Tracking with simple IPv4 flows w/o NAT, we
are able to get ~5 times more flows offloaded per second using HWS.
3. Configuration
----------------
The enablement of HWS mode in eswitch manager is done using the same
devlink param that is already used for switching between FW-managed
steering and SW-managed steering modes:
# devlink dev param set pci/<PCI_ID> name flow_steering_mode cmod runtime value hmfs
4. Upstream Submission
----------------------
HWS support consists of 3 main components:
+ Steering:
- The lower layer that exposes HWS API to upper layers and implements
all the management of flow steering building blocks
+ FS-Core
- Implementation of fs_hws layer to enable fs_core to use HWS instead
of FW or SW steering
- Create HW steering action pools to utilize the ability of HWS to
share steering actions among different rules
- Add support for configuring HWS mode through devlink command,
similar to configuring SWS mode
+ Connection Tracking
- Implementation of CT support for HW steering
- Hooks up the CT ops for the new steering mode and uses the HWS API
to implement connection tracking.
Because of the large number of patches, we need to perform the submission
in several separate patch series. This series is the first submission that
lays the ground work for the next submissions, where an actual user of HWS
will be added.
5. Patches in this series
-------------------------
This patch series contains implementation of the first bullet from above.
=======================
* tag 'mlx5-updates-2024-09-02' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: HWS, added API and enabled HWS support
net/mlx5: HWS, added send engine and context handling
net/mlx5: HWS, added debug dump and internal headers
net/mlx5: HWS, added backward-compatible API handling
net/mlx5: HWS, added memory management handling
net/mlx5: HWS, added vport handling
net/mlx5: HWS, added modify header pattern and args handling
net/mlx5: HWS, added FW commands handling
net/mlx5: HWS, added matchers functionality
net/mlx5: HWS, added definers handling
net/mlx5: HWS, added rules handling
net/mlx5: HWS, added tables handling
net/mlx5: HWS, added actions handling
net/mlx5: Added missing definitions in preparation for HW Steering
net/mlx5: Added missing mlx5_ifc definition for HW Steering
====================
Link: https://patch.msgid.link/20240909181250.41596-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
introduce a new flag SOF_TIMESTAMPING_OPT_RX_FILTER in the receive
path. User can set it with SOF_TIMESTAMPING_SOFTWARE to filter
out rx software timestamp report, especially after a process turns on
netstamp_needed_key which can time stamp every incoming skb.
Previously, we found out if an application starts first which turns on
netstamp_needed_key, then another one only passing SOF_TIMESTAMPING_SOFTWARE
could also get rx timestamp. Now we handle this case by introducing this
new flag without breaking users.
Quoting Willem to explain why we need the flag:
"why a process would want to request software timestamp reporting, but
not receive software timestamp generation. The only use I see is when
the application does request
SOF_TIMESTAMPING_SOFTWARE | SOF_TIMESTAMPING_TX_SOFTWARE."
Similarly, this new flag could also be used for hardware case where we
can set it with SOF_TIMESTAMPING_RAW_HARDWARE, then we won't receive
hardware receive timestamp.
Another thing about errqueue in this patch I have a few words to say:
In this case, we need to handle the egress path carefully, or else
reporting the tx timestamp will fail. Egress path and ingress path will
finally call sock_recv_timestamp(). We have to distinguish them.
Errqueue is a good indicator to reflect the flow direction.
Suggested-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240909015612.3856-2-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This adds support to show firmware version information for both stored and
running firmware versions. The version and commit is displayed separately
to aid monitoring tools which only care about the version.
Example output:
# devlink dev info
pci/0000:01:00.0:
driver fbnic
serial_number 88-25-08-ff-ff-01-50-92
versions:
running:
fw 24.07.15-017
fw.commit h999784ae9df0
fw.bootloader 24.07.10-000
fw.bootloader.commit hfef3ac835ce7
stored:
fw 24.07.24-002
fw.commit hc9d14a68b3f2
fw.bootloader 24.07.22-000
fw.bootloader.commit h922f8493eb96
fw.undi 01.00.03-000
Signed-off-by: Lee Trager <lee@trager.us>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20240905233820.1713043-1-lee@trager.us
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In commit 6f8b12d661 ("net: napi: add hard irqs deferral feature")
napi_defer_irqs was added to net_device and napi_defer_irqs_count was
added to napi_struct, both as type int.
This value never goes below zero, so there is not reason for it to be a
signed int. Change the type for both from int to u32, and add an
overflow check to sysfs to limit the value to S32_MAX.
The limit of S32_MAX was chosen because the practical limit before this
patch was S32_MAX (anything larger was an overflow) and thus there are
no behavioral changes introduced. If the extra bit is needed in the
future, the limit can be raised.
Before this patch:
$ sudo bash -c 'echo 2147483649 > /sys/class/net/eth4/napi_defer_hard_irqs'
$ cat /sys/class/net/eth4/napi_defer_hard_irqs
-2147483647
After this patch:
$ sudo bash -c 'echo 2147483649 > /sys/class/net/eth4/napi_defer_hard_irqs'
bash: line 0: echo: write error: Numerical result out of range
Similarly, /sys/class/net/XXXXX/tx_queue_len is defined as unsigned:
include/linux/netdevice.h: unsigned int tx_queue_len;
And has an overflow check:
dev_change_tx_queue_len(..., unsigned long new_len):
if (new_len != (unsigned int)new_len)
return -ERANGE;
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20240904153431.307932-1-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ability to handle maximum FCoE frames of 2158 bytes can never be changed
and thus more of an attribute, not a toggleable feature.
Move it from netdev_features_t to "cold" priv flags (bitfield bool) and
free yet another feature bit.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
"Interface can't change network namespaces" is rather an attribute,
not a feature, and it can't be changed via Ethtool.
Make it a "cold" private flag instead of a netdev_feature and free
one more bit.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
NETIF_F_LLTX can't be changed via Ethtool and is not a feature,
rather an attribute, very similar to IFF_NO_QUEUE (and hot).
Free one netdev_features_t bit and make it a "hot" private flag.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Make dev->priv_flags `u32` back and define bits higher than 31 as
bitfield booleans as per Jakub's suggestion. This simplifies code
which accesses these bits with no optimization loss (testb both
before/after), allows to not extend &netdev_priv_flags each time,
but also scales better as bits > 63 in the future would only add
a new u64 to the structure with no complications, comparing to
that extending ::priv_flags would require converting it to a bitmap.
Note that I picked `unsigned long :1` to not lose any potential
optimizations comparing to `bool :1` etc.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Two fields, page_pools and *irq_moder, were added to struct net_device
in commit 083772c9f9 ("net: page_pool: record pools per netdev") and
commit f750dfe825 ("ethtool: provide customized dim profile
management"), respectively.
Add both to the net_cachelines documentation, as well.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20240829155742.366584-1-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend the ethtool netlink cable testing interface by adding support for
specifying the source of cable testing results. This allows users to
differentiate between results obtained through different diagnostic
methods.
For example, some TI 10BaseT1L PHYs provide two variants of cable
diagnostics: Time Domain Reflectometry (TDR) and Active Link Cable
Diagnostic (ALCD). By introducing `ETHTOOL_A_CABLE_RESULT_SRC` and
`ETHTOOL_A_CABLE_FAULT_LENGTH_SRC` attributes, this update enables
drivers to indicate whether the result was derived from TDR or ALCD,
improving the clarity and utility of diagnostic information.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240822120703.1393130-2-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The newly introduced phy_link_topology tracks all ethernet PHYs that are
attached to a netdevice. Document the base principle, internal and
external APIs. As the phy_link_topology is expected to be extended, this
documentation will hold any further improvements and additions made
relative to topology handling.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
As we have the ability to track the PHYs connected to a net_device
through the link_topology, we can expose this list to userspace. This
allows userspace to use these identifiers for phy-specific commands and
take the decision of which PHY to target by knowing the link topology.
Add PHY_GET and PHY_DUMP, which can be a filtered DUMP operation to list
devices on only one interface.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some netlink commands are target towards ethernet PHYs, to control some
of their features. As there's several such commands, add the ability to
pass a PHY index in the ethnl request, which will populate the generic
ethnl_req_info with the passed phy_index.
Add a helper that netlink command handlers need to use to grab the
targeted PHY from the req_info. This helper needs to hold rtnl_lock()
while interacting with the PHY, as it may be removed at any point.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Following commit 9f7e8fbb91 ("net/mlx5: offset comp irq index in name by one"),
which fixed the index in IRQ name to start once again from 0, we change
the documentation accordingly.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Link: https://patch.msgid.link/20240815142343.2254247-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Correct spelling problems for Documentation/networking/ as reported
by ispell.
Signed-off-by: Jing-Ping Jan <zoo868e@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240812170910.5760-1-zoo868e@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Applications may want to deal with dynamic RSS contexts only.
So dumping context 0 will be counter-productive for them.
Support starting the dump from a given context ID.
Alternative would be to implement a dump flag to skip just
context 0, not sure which is better...
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
l2tp no longer uses sk_user_data in tunnel sockets and now manages
tunnel/session lifetimes slightly differently. Update docs to cover
this.
CC: linux-doc@vger.kernel.org
CC: corbet@lwn.net
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
draft-ietf-6man-pio-pflag is adding a new flag to the Prefix Information
Option to signal that the network can allocate a unique IPv6 prefix per
client via DHCPv6-PD (see draft-ietf-v6ops-dhcp-pd-per-device).
When ra_honor_pio_pflag is enabled, the presence of a P-flag causes
SLAAC autoconfiguration to be disabled for that particular PIO.
An automated test has been added in Android (r.android.com/3195335) to
go along with this change.
Cc: Maciej Żenczykowski <maze@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: David Lamparter <equinox@opensourcerouting.org>
Cc: Simon Horman <horms@kernel.org>
Signed-off-by: Patrick Rohr <prohr@google.com>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The response to a GET request in Netlink should fully identify
the queried object. RSS_GET accepts context id as an input,
so it must echo that attribute back to the response.
After (assuming context 1 has been created):
$ ./cli.py --spec netlink/specs/ethtool.yaml \
--do rss-get \
--json '{"header": {"dev-index": 2}, "context": 1}'
{'context': 1,
'header': {'dev-index': 2, 'dev-name': 'eth0'},
[...]
Fixes: 7112a04664 ("ethtool: add netlink based get rss support")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20240724234249.2621109-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZqIl1AAKCRDbK58LschI
g/MdAP9oyZV9/IZ6Y6Z1fWfio0SB+yJGugcwbFjWcEtNrzsqJQEAwipQnemAI4NC
HBMfK2a/w7vhAFMXrP/SbkB/gUJJ7QE=
=vovf
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-07-25
We've added 14 non-merge commits during the last 8 day(s) which contain
a total of 19 files changed, 177 insertions(+), 70 deletions(-).
The main changes are:
1) Fix af_unix to disable MSG_OOB handling for sockets in BPF sockmap and
BPF sockhash. Also add test coverage for this case, from Michal Luczaj.
2) Fix a segmentation issue when downgrading gso_size in the BPF helper
bpf_skb_adjust_room(), from Fred Li.
3) Fix a compiler warning in resolve_btfids due to a missing type cast,
from Liwei Song.
4) Fix stack allocation for arm64 to align the stack pointer at a 16 byte
boundary in the fexit_sleep BPF selftest, from Puranjay Mohan.
5) Fix a xsk regression to require a flag when actuating tx_metadata_len,
from Stanislav Fomichev.
6) Fix function prototype BTF dumping in libbpf for prototypes that have
no input arguments, from Andrii Nakryiko.
7) Fix stacktrace symbol resolution in perf script for BPF programs
containing subprograms, from Hou Tao.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Add XDP_UMEM_TX_METADATA_LEN to XSK TX metadata test
xsk: Require XDP_UMEM_TX_METADATA_LEN to actuate tx_metadata_len
bpf: Fix a segment issue when downgrading gso_size
tools/resolve_btfids: Fix comparison of distinct pointer types warning in resolve_btfids
bpf, events: Use prog to emit ksymbol event for main program
selftests/bpf: Test sockmap redirect for AF_UNIX MSG_OOB
selftests/bpf: Parametrize AF_UNIX redir functions to accept send() flags
selftests/bpf: Support SOCK_STREAM in unix_inet_redir_to_connected()
af_unix: Disable MSG_OOB handling for sockets in sockmap/sockhash
bpftool: Fix typo in usage help
libbpf: Fix no-args func prototype BTF dumping syntax
MAINTAINERS: Update powerpc BPF JIT maintainers
MAINTAINERS: Update email address of Naveen
selftests/bpf: fexit_sleep: Fix stack allocation for arm64
====================
Link: https://patch.msgid.link/20240725114312.32197-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Julian reports that commit 341ac980ea ("xsk: Support tx_metadata_len")
can break existing use cases which don't zero-initialize xdp_umem_reg
padding. Introduce new XDP_UMEM_TX_METADATA_LEN to make sure we
interpret the padding as tx_metadata_len only when being explicitly
asked.
Fixes: 341ac980ea ("xsk: Support tx_metadata_len")
Reported-by: Julian Schindel <mail@arctic-alpaca.de>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20240713015253.121248-2-sdf@fomichev.me
DT Bindings:
- Convert and add a bunch of IBM FSI related bindings
- Add a new schema listing legacy compatibles which will (probably)
never be documented. This will silence various checks warning about
them.
- Add bindings for Sierra Wireless mangOH Green SPI IoT interface, new
Arm 2024 Cortex and Neoverse CPUs, QCom sc8180x PDC, QCom SDX75 GPI
DMA, imx8mp/imx8qxp fsl,irqsteer, and Renesas RZ/G2UL CRU and CSI-2
blocks
- Convert Spreadtrum sprd-timer, FSL cpm_qe, FSL fsl,ls-scfg-msi, FSL
q(b)man-*, FSL qoriq-mc, and img,pdc-wdt bindings to DT schema
- Drop obsolete stericsson,abx500.txt
DT core:
- Update dtc to upstream version v1.7.0-93-g1df7b047fe43
- Add support to run DT validation on DTs with applied overlays
- Add helper for creating boolean properties in dynamic nodes and use
that for dynamic PCI nodes
- Clean-up early parsing of '#{address,size}-cells'
-----BEGIN PGP SIGNATURE-----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=tjMz
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT Bindings:
- Convert and add a bunch of IBM FSI related bindings
- Add a new schema listing legacy compatibles which will (probably)
never be documented. This will silence various checks warning about
them.
- Add bindings for Sierra Wireless mangOH Green SPI IoT interface,
new Arm 2024 Cortex and Neoverse CPUs, QCom sc8180x PDC, QCom SDX75
GPI DMA, imx8mp/imx8qxp fsl,irqsteer, and Renesas RZ/G2UL CRU and
CSI-2 blocks
- Convert Spreadtrum sprd-timer, FSL cpm_qe, FSL fsl,ls-scfg-msi, FSL
q(b)man-*, FSL qoriq-mc, and img,pdc-wdt bindings to DT schema
- Drop obsolete stericsson,abx500.txt
DT core:
- Update dtc to upstream version v1.7.0-93-g1df7b047fe43
- Add support to run DT validation on DTs with applied overlays
- Add helper for creating boolean properties in dynamic nodes and use
that for dynamic PCI nodes
- Clean-up early parsing of '#{address,size}-cells'"
* tag 'devicetree-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (39 commits)
dt-bindings: timer: sprd-timer: convert to YAML
dt-bindings: incomplete-devices: document devices without bindings
dt-bindings: trivial-devices: document the Sierra Wireless mangOH Green SPI IoT interface
scripts/dtc: Update to upstream version v1.7.0-93-g1df7b047fe43
dt-bindings: soc: fsl: Add fsl,ls1028a-reset for reset syscon node
dt-bindings: soc: fsl: cpm_qe: convert to yaml format
dt-bindings: i2c: i2c-fsi: Convert to json-schema
dt-bindings: fsi: Document the FSI Hub Controller
dt-bindings: fsi: Document the AST2700 FSI controller
dt-bindings: fsi: ast2600-fsi-master: Convert to json-schema
dt-bindings: fsi: ibm,i2cr-fsi-master: Reference common FSI controller
dt-bindings: fsi: Document the FSI controller common properties
dt-bindings: fsi: Document the IBM SBEFIFO engine
dt-bindings: fsi: p9-occ: Convert to json-schema
dt-bindings: fsi: Document the IBM SCOM engine
dt-bindings: fsi: fsi2spi: Document SPI controller child nodes
dt-bindings: interrupt-controller: convert fsl,ls-scfg-msi to yaml
dt-bindings: soc: fsl: Convert q(b)man-* to yaml format
dt-bindings: misc: fsl,qoriq-mc: convert to yaml format
dt-bindings: drop stale Anson Huang from maintainers
...
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-07-11 (net/intel)
This series contains updates to most Intel network drivers.
Tony removes MODULE_AUTHOR from drivers containing the entry.
Simon Horman corrects a kdoc entry for i40e.
Pawel adds implementation for devlink param "local_forwarding" on ice.
Michal removes unneeded call, and code, for eswitch rebuild for ice.
Sasha removed a no longer used field from igc.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
igc: Remove the internal 'eee_advert' field
ice: remove eswitch rebuild
ice: Add support for devlink local_forwarding param
i40e: correct i40e_addr_to_hkey() name in kdoc
net: intel: Remove MODULE_AUTHORs
====================
Link: https://patch.msgid.link/20240711201932.2019925-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR.
Conflicts:
net/sched/act_ct.c
26488172b0 ("net/sched: Fix UAF when resolving a clash")
3abbd7ed8b ("act_ct: prepare for stolen verdict coming from conntrack and nat engine")
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for driver-specific devlink local_forwarding param.
Supported values are "enabled", "disabled" and "prioritized".
Default configuration is set to "enabled".
Add documentation in networking/devlink/ice.rst.
In previous generations of Intel NICs the transmit scheduler was only
limited by PCIe bandwidth when scheduling/assigning hairpin-bandwidth
between VFs. Changes to E810 HW design introduced scheduler limitation,
so that available hairpin-bandwidth is bound to external port speed.
In order to address this limitation and enable NFV services such as
"service chaining" a knob to adjust the scheduler config was created.
Driver can send a configuration message to the FW over admin queue and
internal FW logic will reconfigure HW to prioritize and add more BW to
VF to VF traffic. An end result, for example, 10G port will no longer
limit hairpin-bandwidth to 10G and much higher speeds can be achieved.
Devlink local_forwarding param set to "prioritized" enables higher
hairpin-bandwitdh on related PFs. Configuration is applicable only to
8x10G and 4x25G cards.
Changing local_forwarding configuration will trigger CORER reset in
order to take effect.
Example command to change current value:
devlink dev param set pci/0000:b2:00.3 name local_forwarding \
value prioritized \
cmode runtime
Co-developed-by: Michal Wilczynski <michal.wilczynski@intel.com>
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Pawel Kaminski <pawel.kaminski@intel.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Convert fsl,qoriq-mc from txt to yaml format.
Addition changes:
- Child node name allow 'ethernet'.
- Use 32bit address in example.
- Fixed missed ';' in example.
- Allow dma-coherent.
- Remove smmu, its part in example.
- Change child node name as 'ethernet'
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240617170934.813321-1-Frank.Li@nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Correct the example to match the help text from the devlink utility.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch expands the status information provided by ethtool for PSE c33
with available power limit and available power limit ranges. It also adds
a call to pse_ethtool_set_pw_limit() to configure the PSE control power
limit.
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20240704-feature_poe_power_cap-v6-5-320003204264@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This update expands the status information provided by ethtool for PSE c33.
It includes details such as the detected class, current power delivered,
and extended state information.
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20240704-feature_poe_power_cap-v6-1-320003204264@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
CMIS compliant modules such as QSFP-DD might be running a firmware that
can be updated in a vendor-neutral way by exchanging messages between
the host and the module as described in section 7.3.1 of revision 5.2 of
the CMIS standard.
Add a pair of new ethtool messages that allow:
* User space to trigger firmware update of transceiver modules
* The kernel to notify user space about the progress of the process
The user interface is designed to be asynchronous in order to avoid
RTNL being held for too long and to allow several modules to be
updated simultaneously. The interface is designed with CMIS compliant
modules in mind, but kept generic enough to accommodate future use
cases, if these arise.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
The NetDIM library, currently leveraged by an array of NICs, delivers
excellent acceleration benefits. Nevertheless, NICs vary significantly
in their dim profile list prerequisites.
Specifically, virtio-net backends may present diverse sw or hw device
implementation, making a one-size-fits-all parameter list impractical.
On Alibaba Cloud, the virtio DPU's performance under the default DIM
profile falls short of expectations, partly due to a mismatch in
parameter configuration.
I also noticed that ice/idpf/ena and other NICs have customized
profilelist or placed some restrictions on dim capabilities.
Motivated by this, I tried adding new params for "ethtool -C" that provides
a per-device control to modify and access a device's interrupt parameters.
Usage
========
The target NIC is named ethx.
Assume that ethx only declares support for rx profile setting
(with DIM_PROFILE_RX flag set in profile_flags) and supports modification
of usec and pkt fields.
1. Query the currently customized list of the device
$ ethtool -c ethx
...
rx-profile:
{.usec = 1, .pkts = 256, .comps = n/a,},
{.usec = 8, .pkts = 256, .comps = n/a,},
{.usec = 64, .pkts = 256, .comps = n/a,},
{.usec = 128, .pkts = 256, .comps = n/a,},
{.usec = 256, .pkts = 256, .comps = n/a,}
tx-profile: n/a
2. Tune
$ ethtool -C ethx rx-profile 1,1,n_2,n,n_3,3,n_4,4,n_n,5,n
"n" means do not modify this field.
$ ethtool -c ethx
...
rx-profile:
{.usec = 1, .pkts = 1, .comps = n/a,},
{.usec = 2, .pkts = 256, .comps = n/a,},
{.usec = 3, .pkts = 3, .comps = n/a,},
{.usec = 4, .pkts = 4, .comps = n/a,},
{.usec = 256, .pkts = 5, .comps = n/a,}
tx-profile: n/a
3. Hint
If the device does not support some type of customized dim profiles,
the corresponding "n/a" will display.
If the "n/a" field is being modified, -EOPNOTSUPP will be reported.
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240621101353.107425-4-hengqi@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEUEC6huC2BN0pvD5fKDiiPnotvG8FAmZ1MB4THG1rbEBwZW5n
dXRyb25peC5kZQAKCRAoOKI+ei28b+QQB/9wDkLdjgRsvI3c32IXxTrOmuX97Pm2
jYaHXmH1QkOKK0CXkPLEGjzpxSVXO6/d+ooeINkKmeF9VrtxxYWuE9pEsulyPz4y
dbeK5oAZdhtS6CEnArzbNHR6mdP1IcmJ3uKojsV71t+4GTdZw4WHe6LNgC4ua7n8
oYOpgbEV/YP/AyP8vO1L65M+tI69/0jeDpidtDQkNgWepE/Kh0W0ASfqjYrBgvZq
eycUmLTCigKNhG8fNJVHejyrnLynY2QBqwM7M5yYw1q8lX4W8Yf1y55VCqzPz63D
RiYVdVdG720jk9Ux9ZqxAKBPyzACnV6CG/MnzIgIdpV3O1aEf1WDkU2Y
=rRB9
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-6.11-20240621' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2024-06-21
The first 2 patches are by Andy Shevchenko, one cleans up the includes
in the mcp251x driver, the other one updates the sja100 plx_pci driver
to make use of predefines PCI subvendor ID.
Mans Rullgard's patch cleans up the Kconfig help text of for the slcan
driver.
Oliver Hartkopp provides a patch to update the documentation, which
removes the ISO 15675-2 specification version where possible.
The next 2 patches are by Harini T and update the documentation of the
xilinx_can driver.
Francesco Valla provides documentation for the ISO 15765-2 protocol.
A patch by Dr. David Alan Gilbert removes an unused struct from the
mscan driver.
12 patches are by Martin Jocic. The first three add support for 3 new
devices to the kvaser_usb driver. The remaining 9 first clean up the
kvaser_pciefd driver, and then add support for MSI.
Krzysztof Kozlowski contributes 3 patches simplifies the CAN SPI
drivers by making use of spi_get_device_match_data().
The last patch is by Martin Hundebøll, which reworks the m_can driver
to not enable the CAN transceiver during probe.
* tag 'linux-can-next-for-6.11-20240621' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: (24 commits)
can: m_can: don't enable transceiver when probing
can: mcp251xfd: simplify with spi_get_device_match_data()
can: mcp251x: simplify with spi_get_device_match_data()
can: hi311x: simplify with spi_get_device_match_data()
can: kvaser_pciefd: Add MSI interrupts
can: kvaser_pciefd: Move reset of DMA RX buffers to the end of the ISR
can: kvaser_pciefd: Change name of return code variable
can: kvaser_pciefd: Rename board_irq to pci_irq
can: kvaser_pciefd: Add unlikely
can: kvaser_pciefd: Add inline
can: kvaser_pciefd: Remove unnecessary comment
can: kvaser_pciefd: Skip redundant NULL pointer check in ISR
can: kvaser_pciefd: Group #defines together
can: kvaser_usb: Add support for Kvaser Mini PCIe 1xCAN
can: kvaser_usb: Add support for Kvaser USBcan Pro 5xCAN
can: kvaser_usb: Add support for Vining 800
can: mscan: remove unused struct 'mscan_state'
Documentation: networking: document ISO 15765-2
can: xilinx_can: Document driver description to list all supported IPs
can: isotp: remove ISO 15675-2 specification version where possible
...
====================
Link: https://patch.msgid.link/20240621080201.305471-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The existing method of reserving unicast filter count leads to wasted
MCAM entries if the functionality is not used or fewer entries are used.
Furthermore, the amount of MCAM entries differs amongst Octeon SoCs.
We implemented a means to adjust the UC filter count via devlink,
allowing for better use of MCAM entries across Netdev apps.
commands:
To get the current unicast filter count
# devlink dev param show pci/0002:02:00.0 name unicast_filter_count
To change/set the unicast filter count
# devlink dev param set pci/0002:02:00.0 name unicast_filter_count
value 5 cmode runtime
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
New drivers were prevented from adding ndo_set_vf_* callbacks
over the last few years. This was expected to result in broader
switchdev adoption, but seems to have had little effect.
Based on recent netdev meeting there is broad support for allowing
adding those ops.
There is a problem with the current API supporting a limited number
of VFs (100+, which is less than some modern HW supports).
We can try to solve it by adding similar functionality on devlink
ports, but that'd be another API variation to maintain.
So a netlink attribute reshuffling is a more likely outcome.
Document the guidance, make it clear that the API is frozen.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Document basic concepts, APIs and behaviour of the ISO 15675-2 (ISO-TP)
CAN stack.
Signed-off-by: Francesco Valla <valla.francesco@gmail.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20240501092413.414700-2-valla.francesco@gmail.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
10G-QXGMII is a MAC-to-PHY interface defined by the USXGMII multiport
specification. It uses the same signaling as USXGMII, but it multiplexes
4 ports over the link, resulting in a maximum speed of 2.5G per port.
Some in-tree SoCs like the NXP LS1028A use "usxgmii" when they mean
either the single-port USXGMII or the quad-port 10G-QXGMII variant, and
they could get away just fine with that thus far. But there is a need to
distinguish between the 2 as far as SerDes drivers are concerned.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
