b44: power down PHY when interface down

This is just this patch (http://lkml.org/lkml/2007/7/1/51) but adapted
to the 'b44' ssb driver.

Signed-off-by: Miguel Botón <mboton@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
This commit is contained in:
Miguel Botón 2008-01-01 01:17:54 +01:00 committed by David S. Miller
parent 961d57c883
commit fedb0eefe2

View File

@ -128,6 +128,8 @@ static void b44_init_rings(struct b44 *);
#define B44_FULL_RESET 1
#define B44_FULL_RESET_SKIP_PHY 2
#define B44_PARTIAL_RESET 3
#define B44_CHIP_RESET_FULL 4
#define B44_CHIP_RESET_PARTIAL 5
static void b44_init_hw(struct b44 *, int);
@ -1259,7 +1261,7 @@ static void b44_clear_stats(struct b44 *bp)
}
/* bp->lock is held. */
static void b44_chip_reset(struct b44 *bp)
static void b44_chip_reset(struct b44 *bp, int reset_kind)
{
struct ssb_device *sdev = bp->sdev;
@ -1281,6 +1283,13 @@ static void b44_chip_reset(struct b44 *bp)
ssb_device_enable(bp->sdev, 0);
b44_clear_stats(bp);
/*
* Don't enable PHY if we are doing a partial reset
* we are probably going to power down
*/
if (reset_kind == B44_CHIP_RESET_PARTIAL)
return;
switch (sdev->bus->bustype) {
case SSB_BUSTYPE_SSB:
bw32(bp, B44_MDIO_CTRL, (MDIO_CTRL_PREAMBLE |
@ -1316,7 +1325,14 @@ static void b44_chip_reset(struct b44 *bp)
static void b44_halt(struct b44 *bp)
{
b44_disable_ints(bp);
b44_chip_reset(bp);
/* reset PHY */
b44_phy_reset(bp);
/* power down PHY */
printk(KERN_INFO PFX "%s: powering down PHY\n", bp->dev->name);
bw32(bp, B44_MAC_CTRL, MAC_CTRL_PHY_PDOWN);
/* now reset the chip, but without enabling the MAC&PHY
* part of it. This has to be done _after_ we shut down the PHY */
b44_chip_reset(bp, B44_CHIP_RESET_PARTIAL);
}
/* bp->lock is held. */
@ -1365,7 +1381,7 @@ static void b44_init_hw(struct b44 *bp, int reset_kind)
{
u32 val;
b44_chip_reset(bp);
b44_chip_reset(bp, B44_CHIP_RESET_FULL);
if (reset_kind == B44_FULL_RESET) {
b44_phy_reset(bp);
b44_setup_phy(bp);
@ -1422,7 +1438,7 @@ static int b44_open(struct net_device *dev)
err = request_irq(dev->irq, b44_interrupt, IRQF_SHARED, dev->name, dev);
if (unlikely(err < 0)) {
napi_disable(&bp->napi);
b44_chip_reset(bp);
b44_chip_reset(bp, B44_CHIP_RESET_PARTIAL);
b44_free_rings(bp);
b44_free_consistent(bp);
goto out;
@ -2188,7 +2204,7 @@ static int __devinit b44_init_one(struct ssb_device *sdev,
/* Chip reset provides power to the b44 MAC & PCI cores, which
* is necessary for MAC register access.
*/
b44_chip_reset(bp);
b44_chip_reset(bp, B44_CHIP_RESET_FULL);
printk(KERN_INFO "%s: Broadcom 44xx/47xx 10/100BaseT Ethernet %s\n",
dev->name, print_mac(mac, dev->dev_addr));
@ -2212,6 +2228,7 @@ static void __devexit b44_remove_one(struct ssb_device *sdev)
unregister_netdev(dev);
ssb_bus_may_powerdown(sdev->bus);
free_netdev(dev);
ssb_pcihost_set_power_state(sdev, PCI_D3hot);
ssb_set_drvdata(sdev, NULL);
}
@ -2240,6 +2257,7 @@ static int b44_suspend(struct ssb_device *sdev, pm_message_t state)
b44_setup_wol(bp);
}
ssb_pcihost_set_power_state(sdev, PCI_D3hot);
return 0;
}