Merge branch 'master' into for-2.6.34

This commit is contained in:
Jens Axboe 2010-02-22 13:48:51 +01:00
commit f11cbd74c5
1704 changed files with 42281 additions and 16992 deletions

1
.gitignore vendored
View File

@ -37,6 +37,7 @@ modules.builtin
tags
TAGS
vmlinux
vmlinuz
System.map
Module.markers
Module.symvers

View File

@ -20,7 +20,7 @@ Description:
lsm: [[subj_user=] [subj_role=] [subj_type=]
[obj_user=] [obj_role=] [obj_type=]]
base: func:= [BPRM_CHECK][FILE_MMAP][INODE_PERMISSION]
base: func:= [BPRM_CHECK][FILE_MMAP][FILE_CHECK]
mask:= [MAY_READ] [MAY_WRITE] [MAY_APPEND] [MAY_EXEC]
fsmagic:= hex value
uid:= decimal value
@ -40,11 +40,11 @@ Description:
measure func=BPRM_CHECK
measure func=FILE_MMAP mask=MAY_EXEC
measure func=INODE_PERM mask=MAY_READ uid=0
measure func=FILE_CHECK mask=MAY_READ uid=0
The default policy measures all executables in bprm_check,
all files mmapped executable in file_mmap, and all files
open for read by root in inode_permission.
open for read by root in do_filp_open.
Examples of LSM specific definitions:
@ -54,8 +54,8 @@ Description:
dont_measure obj_type=var_log_t
dont_measure obj_type=auditd_log_t
measure subj_user=system_u func=INODE_PERM mask=MAY_READ
measure subj_role=system_r func=INODE_PERM mask=MAY_READ
measure subj_user=system_u func=FILE_CHECK mask=MAY_READ
measure subj_role=system_r func=FILE_CHECK mask=MAY_READ
Smack:
measure subj_user=_ func=INODE_PERM mask=MAY_READ
measure subj_user=_ func=FILE_CHECK mask=MAY_READ

View File

@ -174,7 +174,7 @@
</para>
<programlisting>
static struct mtd_info *board_mtd;
static unsigned long baseaddr;
static void __iomem *baseaddr;
</programlisting>
<para>
Static example
@ -182,7 +182,7 @@ static unsigned long baseaddr;
<programlisting>
static struct mtd_info board_mtd;
static struct nand_chip board_chip;
static unsigned long baseaddr;
static void __iomem *baseaddr;
</programlisting>
</sect1>
<sect1 id="Partition_defines">
@ -283,8 +283,8 @@ int __init board_init (void)
}
/* map physical address */
baseaddr = (unsigned long)ioremap(CHIP_PHYSICAL_ADDRESS, 1024);
if(!baseaddr){
baseaddr = ioremap(CHIP_PHYSICAL_ADDRESS, 1024);
if (!baseaddr) {
printk("Ioremap to access NAND chip failed\n");
err = -EIO;
goto out_mtd;
@ -316,7 +316,7 @@ int __init board_init (void)
goto out;
out_ior:
iounmap((void *)baseaddr);
iounmap(baseaddr);
out_mtd:
kfree (board_mtd);
out:
@ -341,7 +341,7 @@ static void __exit board_cleanup (void)
nand_release (board_mtd);
/* unmap physical address */
iounmap((void *)baseaddr);
iounmap(baseaddr);
/* Free the MTD device structure */
kfree (board_mtd);

View File

@ -157,7 +157,7 @@ For such memory, you can do things like
* access only the 640k-1MB area, so anything else
* has to be remapped.
*/
char * baseptr = ioremap(0xFC000000, 1024*1024);
void __iomem *baseptr = ioremap(0xFC000000, 1024*1024);
/* write a 'A' to the offset 10 of the area */
writeb('A',baseptr+10);

View File

@ -186,7 +186,7 @@ a virtual address mapping (unlike the earlier scheme of virtual address
do not have a corresponding kernel virtual address space mapping) and
low-memory pages.
Note: Please refer to Documentation/DMA-mapping.txt for a discussion
Note: Please refer to Documentation/PCI/PCI-DMA-mapping.txt for a discussion
on PCI high mem DMA aspects and mapping of scatter gather lists, and support
for 64 bit PCI.

View File

@ -145,8 +145,8 @@ show_sampling_rate_max: THIS INTERFACE IS DEPRECATED, DON'T USE IT.
up_threshold: defines what the average CPU usage between the samplings
of 'sampling_rate' needs to be for the kernel to make a decision on
whether it should increase the frequency. For example when it is set
to its default value of '80' it means that between the checking
intervals the CPU needs to be on average more than 80% in use to then
to its default value of '95' it means that between the checking
intervals the CPU needs to be on average more than 95% in use to then
decide that the CPU frequency needs to be increased.
ignore_nice_load: this parameter takes a value of '0' or '1'. When

View File

@ -143,8 +143,8 @@ o provide a way to configure fault attributes
failslab, fail_page_alloc, and fail_make_request use this way.
Helper functions:
init_fault_attr_entries(entries, attr, name);
void cleanup_fault_attr_entries(entries);
init_fault_attr_dentries(entries, attr, name);
void cleanup_fault_attr_dentries(entries);
- module parameters

View File

@ -493,3 +493,52 @@ Why: These two features use non-standard interfaces. There are the
Who: Corentin Chary <corentin.chary@gmail.com>
----------------------------
What: usbvideo quickcam_messenger driver
When: 2.6.35
Files: drivers/media/video/usbvideo/quickcam_messenger.[ch]
Why: obsolete v4l1 driver replaced by gspca_stv06xx
Who: Hans de Goede <hdegoede@redhat.com>
----------------------------
What: ov511 v4l1 driver
When: 2.6.35
Files: drivers/media/video/ov511.[ch]
Why: obsolete v4l1 driver replaced by gspca_ov519
Who: Hans de Goede <hdegoede@redhat.com>
----------------------------
What: w9968cf v4l1 driver
When: 2.6.35
Files: drivers/media/video/w9968cf*.[ch]
Why: obsolete v4l1 driver replaced by gspca_ov519
Who: Hans de Goede <hdegoede@redhat.com>
----------------------------
What: ovcamchip sensor framework
When: 2.6.35
Files: drivers/media/video/ovcamchip/*
Why: Only used by obsoleted v4l1 drivers
Who: Hans de Goede <hdegoede@redhat.com>
----------------------------
What: stv680 v4l1 driver
When: 2.6.35
Files: drivers/media/video/stv680.[ch]
Why: obsolete v4l1 driver replaced by gspca_stv0680
Who: Hans de Goede <hdegoede@redhat.com>
----------------------------
What: zc0301 v4l driver
When: 2.6.35
Files: drivers/media/video/zc0301/*
Why: Duplicate functionality with the gspca_zc3xx driver, zc0301 only
supports 2 USB-ID's (because it only supports a limited set of
sensors) wich are also supported by the gspca_zc3xx driver
(which supports 53 USB-ID's in total)
Who: Hans de Goede <hdegoede@redhat.com>

View File

@ -28,7 +28,7 @@ described in the man pages included in the package.
Project web page: http://www.nilfs.org/en/
Download page: http://www.nilfs.org/en/download.html
Git tree web page: http://www.nilfs.org/git/
NILFS mailing lists: http://www.nilfs.org/mailman/listinfo/users
List info: http://vger.kernel.org/vger-lists.html#linux-nilfs
Caveats
=======

View File

@ -177,7 +177,6 @@ read the file /proc/PID/status:
CapBnd: ffffffffffffffff
voluntary_ctxt_switches: 0
nonvoluntary_ctxt_switches: 1
Stack usage: 12 kB
This shows you nearly the same information you would get if you viewed it with
the ps command. In fact, ps uses the proc file system to obtain its
@ -231,7 +230,6 @@ Table 1-2: Contents of the statm files (as of 2.6.30-rc7)
Mems_allowed_list Same as previous, but in "list format"
voluntary_ctxt_switches number of voluntary context switches
nonvoluntary_ctxt_switches number of non voluntary context switches
Stack usage: stack usage high water mark (round up to page size)
..............................................................................
Table 1-3: Contents of the statm files (as of 2.6.8-rc3)

102
Documentation/hwmon/amc6821 Normal file
View File

@ -0,0 +1,102 @@
Kernel driver amc6821
=====================
Supported chips:
Texas Instruments AMC6821
Prefix: 'amc6821'
Addresses scanned: 0x18, 0x19, 0x1a, 0x2c, 0x2d, 0x2e, 0x4c, 0x4d, 0x4e
Datasheet: http://focus.ti.com/docs/prod/folders/print/amc6821.html
Authors:
Tomaz Mertelj <tomaz.mertelj@guest.arnes.si>
Description
-----------
This driver implements support for the Texas Instruments amc6821 chip.
The chip has one on-chip and one remote temperature sensor and one pwm fan
regulator.
The pwm can be controlled either from software or automatically.
The driver provides the following sensor accesses in sysfs:
temp1_input ro on-chip temperature
temp1_min rw "
temp1_max rw "
temp1_crit rw "
temp1_min_alarm ro "
temp1_max_alarm ro "
temp1_crit_alarm ro "
temp2_input ro remote temperature
temp2_min rw "
temp2_max rw "
temp2_crit rw "
temp2_min_alarm ro "
temp2_max_alarm ro "
temp2_crit_alarm ro "
temp2_fault ro "
fan1_input ro tachometer speed
fan1_min rw "
fan1_max rw "
fan1_fault ro "
fan1_div rw Fan divisor can be either 2 or 4.
pwm1 rw pwm1
pwm1_enable rw regulator mode, 1=open loop, 2=fan controlled
by remote temperature, 3=fan controlled by
combination of the on-chip temperature and
remote-sensor temperature,
pwm1_auto_channels_temp ro 1 if pwm_enable==2, 3 if pwm_enable==3
pwm1_auto_point1_pwm ro Hardwired to 0, shared for both
temperature channels.
pwm1_auto_point2_pwm rw This value is shared for both temperature
channels.
pwm1_auto_point3_pwm rw Hardwired to 255, shared for both
temperature channels.
temp1_auto_point1_temp ro Hardwired to temp2_auto_point1_temp
which is rw. Below this temperature fan stops.
temp1_auto_point2_temp rw The low-temperature limit of the proportional
range. Below this temperature
pwm1 = pwm1_auto_point2_pwm. It can go from
0 degree C to 124 degree C in steps of
4 degree C. Read it out after writing to get
the actual value.
temp1_auto_point3_temp rw Above this temperature fan runs at maximum
speed. It can go from temp1_auto_point2_temp.
It can only have certain discrete values
which depend on temp1_auto_point2_temp and
pwm1_auto_point2_pwm. Read it out after
writing to get the actual value.
temp2_auto_point1_temp rw Must be between 0 degree C and 63 degree C and
it defines the passive cooling temperature.
Below this temperature the fan stops in
the closed loop mode.
temp2_auto_point2_temp rw The low-temperature limit of the proportional
range. Below this temperature
pwm1 = pwm1_auto_point2_pwm. It can go from
0 degree C to 124 degree C in steps
of 4 degree C.
temp2_auto_point3_temp rw Above this temperature fan runs at maximum
speed. It can only have certain discrete
values which depend on temp2_auto_point2_temp
and pwm1_auto_point2_pwm. Read it out after
writing to get actual value.
Module parameters
-----------------
If your board has a BIOS that initializes the amc6821 correctly, you should
load the module with: init=0.
If your board BIOS doesn't initialize the chip, or you want
different settings, you can set the following parameters:
init=1,
pwminv: 0 default pwm output, 1 inverts pwm output.

View File

@ -3,8 +3,8 @@ Kernel driver k10temp
Supported chips:
* AMD Family 10h processors:
Socket F: Quad-Core/Six-Core/Embedded Opteron
Socket AM2+: Opteron, Phenom (II) X3/X4
Socket F: Quad-Core/Six-Core/Embedded Opteron (but see below)
Socket AM2+: Quad-Core Opteron, Phenom (II) X3/X4, Athlon X2 (but see below)
Socket AM3: Quad-Core Opteron, Athlon/Phenom II X2/X3/X4, Sempron II
Socket S1G3: Athlon II, Sempron, Turion II
* AMD Family 11h processors:
@ -36,10 +36,15 @@ Description
This driver permits reading of the internal temperature sensor of AMD
Family 10h and 11h processors.
All these processors have a sensor, but on older revisions of Family 10h
processors, the sensor may return inconsistent values (erratum 319). The
driver will refuse to load on these revisions unless you specify the
"force=1" module parameter.
All these processors have a sensor, but on those for Socket F or AM2+,
the sensor may return inconsistent values (erratum 319). The driver
will refuse to load on these revisions unless you specify the "force=1"
module parameter.
Due to technical reasons, the driver can detect only the mainboard's
socket type, not the processor's actual capabilities. Therefore, if you
are using an AM3 processor on an AM2+ mainboard, you can safely use the
"force=1" parameter.
There is one temperature measurement value, available as temp1_input in
sysfs. It is measured in degrees Celsius with a resolution of 1/8th degree.

View File

@ -27,12 +27,30 @@ set of events/packets.
A set of ABS_MT events with the desired properties is defined. The events
are divided into categories, to allow for partial implementation. The
minimum set consists of ABS_MT_TOUCH_MAJOR, ABS_MT_POSITION_X and
ABS_MT_POSITION_Y, which allows for multiple fingers to be tracked. If the
device supports it, the ABS_MT_WIDTH_MAJOR may be used to provide the size
of the approaching finger. Anisotropy and direction may be specified with
ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MINOR and ABS_MT_ORIENTATION. The
ABS_MT_TOOL_TYPE may be used to specify whether the touching tool is a
minimum set consists of ABS_MT_POSITION_X and ABS_MT_POSITION_Y, which
allows for multiple fingers to be tracked. If the device supports it, the
ABS_MT_TOUCH_MAJOR and ABS_MT_WIDTH_MAJOR may be used to provide the size
of the contact area and approaching finger, respectively.
The TOUCH and WIDTH parameters have a geometrical interpretation; imagine
looking through a window at someone gently holding a finger against the
glass. You will see two regions, one inner region consisting of the part
of the finger actually touching the glass, and one outer region formed by
the perimeter of the finger. The diameter of the inner region is the
ABS_MT_TOUCH_MAJOR, the diameter of the outer region is
ABS_MT_WIDTH_MAJOR. Now imagine the person pressing the finger harder
against the glass. The inner region will increase, and in general, the
ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR, which is always smaller than
unity, is related to the finger pressure. For pressure-based devices,
ABS_MT_PRESSURE may be used to provide the pressure on the contact area
instead.
In addition to the MAJOR parameters, the oval shape of the finger can be
described by adding the MINOR parameters, such that MAJOR and MINOR are the
major and minor axis of an ellipse. Finally, the orientation of the oval
shape can be describe with the ORIENTATION parameter.
The ABS_MT_TOOL_TYPE may be used to specify whether the touching tool is a
finger or a pen or something else. Devices with more granular information
may specify general shapes as blobs, i.e., as a sequence of rectangular
shapes grouped together by an ABS_MT_BLOB_ID. Finally, for the few devices
@ -42,11 +60,9 @@ report finger tracking from hardware [5].
Here is what a minimal event sequence for a two-finger touch would look
like:
ABS_MT_TOUCH_MAJOR
ABS_MT_POSITION_X
ABS_MT_POSITION_Y
SYN_MT_REPORT
ABS_MT_TOUCH_MAJOR
ABS_MT_POSITION_X
ABS_MT_POSITION_Y
SYN_MT_REPORT
@ -87,6 +103,12 @@ the contact. The ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR approximates
the notion of pressure. The fingers of the hand and the palm all have
different characteristic widths [1].
ABS_MT_PRESSURE
The pressure, in arbitrary units, on the contact area. May be used instead
of TOUCH and WIDTH for pressure-based devices or any device with a spatial
signal intensity distribution.
ABS_MT_ORIENTATION
The orientation of the ellipse. The value should describe a signed quarter
@ -170,6 +192,16 @@ There are a few devices that support trackingID in hardware. User space can
make use of these native identifiers to reduce bandwidth and cpu usage.
Gestures
--------
In the specific application of creating gesture events, the TOUCH and WIDTH
parameters can be used to, e.g., approximate finger pressure or distinguish
between index finger and thumb. With the addition of the MINOR parameters,
one can also distinguish between a sweeping finger and a pointing finger,
and with ORIENTATION, one can detect twisting of fingers.
Notes
-----

View File

@ -56,10 +56,11 @@ Following this convention is good because:
(5) When following the convention, the driver code can use generic
code to copy the parameters between user and kernel space.
This table lists ioctls visible from user land for Linux/i386. It contains
most drivers up to 2.3.14, but I know I am missing some.
This table lists ioctls visible from user land for Linux/x86. It contains
most drivers up to 2.6.31, but I know I am missing some. There has been
no attempt to list non-X86 architectures or ioctls from drivers/staging/.
Code Seq# Include File Comments
Code Seq#(hex) Include File Comments
========================================================
0x00 00-1F linux/fs.h conflict!
0x00 00-1F scsi/scsi_ioctl.h conflict!
@ -69,119 +70,228 @@ Code Seq# Include File Comments
0x03 all linux/hdreg.h
0x04 D2-DC linux/umsdos_fs.h Dead since 2.6.11, but don't reuse these.
0x06 all linux/lp.h
0x09 all linux/md.h
0x09 all linux/raid/md_u.h
0x10 00-0F drivers/char/s390/vmcp.h
0x12 all linux/fs.h
linux/blkpg.h
0x1b all InfiniBand Subsystem <http://www.openib.org/>
0x20 all drivers/cdrom/cm206.h
0x22 all scsi/sg.h
'#' 00-3F IEEE 1394 Subsystem Block for the entire subsystem
'$' 00-0F linux/perf_counter.h, linux/perf_event.h
'1' 00-1F <linux/timepps.h> PPS kit from Ulrich Windl
<ftp://ftp.de.kernel.org/pub/linux/daemons/ntp/PPS/>
'2' 01-04 linux/i2o.h
'3' 00-0F drivers/s390/char/raw3270.h conflict!
'3' 00-1F linux/suspend_ioctls.h conflict!
and kernel/power/user.c
'8' all SNP8023 advanced NIC card
<mailto:mcr@solidum.com>
'A' 00-1F linux/apm_bios.h
'@' 00-0F linux/radeonfb.h conflict!
'@' 00-0F drivers/video/aty/aty128fb.c conflict!
'A' 00-1F linux/apm_bios.h conflict!
'A' 00-0F linux/agpgart.h conflict!
and drivers/char/agp/compat_ioctl.h
'A' 00-7F sound/asound.h conflict!
'B' 00-1F linux/cciss_ioctl.h conflict!
'B' 00-0F include/linux/pmu.h conflict!
'B' C0-FF advanced bbus
<mailto:maassen@uni-freiburg.de>
'C' all linux/soundcard.h
'C' all linux/soundcard.h conflict!
'C' 01-2F linux/capi.h conflict!
'C' F0-FF drivers/net/wan/cosa.h conflict!
'D' all arch/s390/include/asm/dasd.h
'E' all linux/input.h
'F' all linux/fb.h
'H' all linux/hiddev.h
'I' all linux/isdn.h
'D' 40-5F drivers/scsi/dpt/dtpi_ioctl.h
'D' 05 drivers/scsi/pmcraid.h
'E' all linux/input.h conflict!
'E' 00-0F xen/evtchn.h conflict!
'F' all linux/fb.h conflict!
'F' 01-02 drivers/scsi/pmcraid.h conflict!
'F' 20 drivers/video/fsl-diu-fb.h conflict!
'F' 20 drivers/video/intelfb/intelfb.h conflict!
'F' 20 linux/ivtvfb.h conflict!
'F' 20 linux/matroxfb.h conflict!
'F' 20 drivers/video/aty/atyfb_base.c conflict!
'F' 00-0F video/da8xx-fb.h conflict!
'F' 80-8F linux/arcfb.h conflict!
'F' DD video/sstfb.h conflict!
'G' 00-3F drivers/misc/sgi-gru/grulib.h conflict!
'G' 00-0F linux/gigaset_dev.h conflict!
'H' 00-7F linux/hiddev.h conflict!
'H' 00-0F linux/hidraw.h conflict!
'H' 00-0F sound/asound.h conflict!
'H' 20-40 sound/asound_fm.h conflict!
'H' 80-8F sound/sfnt_info.h conflict!
'H' 10-8F sound/emu10k1.h conflict!
'H' 10-1F sound/sb16_csp.h conflict!
'H' 10-1F sound/hda_hwdep.h conflict!
'H' 40-4F sound/hdspm.h conflict!
'H' 40-4F sound/hdsp.h conflict!
'H' 90 sound/usb/usx2y/usb_stream.h
'H' C0-F0 net/bluetooth/hci.h conflict!
'H' C0-DF net/bluetooth/hidp/hidp.h conflict!
'H' C0-DF net/bluetooth/cmtp/cmtp.h conflict!
'H' C0-DF net/bluetooth/bnep/bnep.h conflict!
'I' all linux/isdn.h conflict!
'I' 00-0F drivers/isdn/divert/isdn_divert.h conflict!
'I' 40-4F linux/mISDNif.h conflict!
'J' 00-1F drivers/scsi/gdth_ioctl.h
'K' all linux/kd.h
'L' 00-1F linux/loop.h
'L' 20-2F driver/usb/misc/vstusb.h
'L' 00-1F linux/loop.h conflict!
'L' 10-1F drivers/scsi/mpt2sas/mpt2sas_ctl.h conflict!
'L' 20-2F linux/usb/vstusb.h
'L' E0-FF linux/ppdd.h encrypted disk device driver
<http://linux01.gwdg.de/~alatham/ppdd.html>
'M' all linux/soundcard.h
'M' all linux/soundcard.h conflict!
'M' 01-16 mtd/mtd-abi.h conflict!
and drivers/mtd/mtdchar.c
'M' 01-03 drivers/scsi/megaraid/megaraid_sas.h
'M' 00-0F drivers/video/fsl-diu-fb.h conflict!
'N' 00-1F drivers/usb/scanner.h
'O' 00-02 include/mtd/ubi-user.h UBI
'P' all linux/soundcard.h
'O' 00-06 mtd/ubi-user.h UBI
'P' all linux/soundcard.h conflict!
'P' 60-6F sound/sscape_ioctl.h conflict!
'P' 00-0F drivers/usb/class/usblp.c conflict!
'Q' all linux/soundcard.h
'R' 00-1F linux/random.h
'R' 00-1F linux/random.h conflict!
'R' 01 linux/rfkill.h conflict!
'R' 01-0F media/rds.h conflict!
'R' C0-DF net/bluetooth/rfcomm.h
'S' all linux/cdrom.h conflict!
'S' 80-81 scsi/scsi_ioctl.h conflict!
'S' 82-FF scsi/scsi.h conflict!
'S' 00-7F sound/asequencer.h conflict!
'T' all linux/soundcard.h conflict!
'T' 00-AF sound/asound.h conflict!
'T' all arch/x86/include/asm/ioctls.h conflict!
'U' 00-EF linux/drivers/usb/usb.h
'V' all linux/vt.h
'T' C0-DF linux/if_tun.h conflict!
'U' all sound/asound.h conflict!
'U' 00-0F drivers/media/video/uvc/uvcvideo.h conflict!
'U' 00-CF linux/uinput.h conflict!
'U' 00-EF linux/usbdevice_fs.h
'U' C0-CF drivers/bluetooth/hci_uart.h
'V' all linux/vt.h conflict!
'V' all linux/videodev2.h conflict!
'V' C0 linux/ivtvfb.h conflict!
'V' C0 linux/ivtv.h conflict!
'V' C0 media/davinci/vpfe_capture.h conflict!
'V' C0 media/si4713.h conflict!
'V' C0-CF drivers/media/video/mxb.h conflict!
'W' 00-1F linux/watchdog.h conflict!
'W' 00-1F linux/wanrouter.h conflict!
'X' all linux/xfs_fs.h
'W' 00-3F sound/asound.h conflict!
'X' all fs/xfs/xfs_fs.h conflict!
and fs/xfs/linux-2.6/xfs_ioctl32.h
and include/linux/falloc.h
and linux/fs.h
'X' all fs/ocfs2/ocfs_fs.h conflict!
'X' 01 linux/pktcdvd.h conflict!
'Y' all linux/cyclades.h
'[' 00-07 linux/usb/usbtmc.h USB Test and Measurement Devices
'Z' 14-15 drivers/message/fusion/mptctl.h
'[' 00-07 linux/usb/tmc.h USB Test and Measurement Devices
<mailto:gregkh@suse.de>
'a' all ATM on linux
'a' all linux/atm*.h, linux/sonet.h ATM on linux
<http://lrcwww.epfl.ch/linux-atm/magic.html>
'b' 00-FF bit3 vme host bridge
'b' 00-FF conflict! bit3 vme host bridge
<mailto:natalia@nikhefk.nikhef.nl>
'b' 00-0F media/bt819.h conflict!
'c' all linux/cm4000_cs.h conflict!
'c' 00-7F linux/comstats.h conflict!
'c' 00-7F linux/coda.h conflict!
'c' 80-9F arch/s390/include/asm/chsc.h
'c' A0-AF arch/x86/include/asm/msr.h
'c' 00-1F linux/chio.h conflict!
'c' 80-9F arch/s390/include/asm/chsc.h conflict!
'c' A0-AF arch/x86/include/asm/msr.h conflict!
'd' 00-FF linux/char/drm/drm/h conflict!
'd' 02-40 pcmcia/ds.h conflict!
'd' 10-3F drivers/media/video/dabusb.h conflict!
'd' C0-CF drivers/media/video/saa7191.h conflict!
'd' F0-FF linux/digi1.h
'e' all linux/digi1.h conflict!
'e' 00-1F net/irda/irtty.h conflict!
'f' 00-1F linux/ext2_fs.h
'h' 00-7F Charon filesystem
'e' 00-1F drivers/net/irda/irtty-sir.h conflict!
'f' 00-1F linux/ext2_fs.h conflict!
'f' 00-1F linux/ext3_fs.h conflict!
'f' 00-0F fs/jfs/jfs_dinode.h conflict!
'f' 00-0F fs/ext4/ext4.h conflict!
'f' 00-0F linux/fs.h conflict!
'f' 00-0F fs/ocfs2/ocfs2_fs.h conflict!
'g' 00-0F linux/usb/gadgetfs.h
'g' 20-2F linux/usb/g_printer.h
'h' 00-7F conflict! Charon filesystem
<mailto:zapman@interlan.net>
'i' 00-3F linux/i2o.h
'h' 00-1F linux/hpet.h conflict!
'i' 00-3F linux/i2o-dev.h conflict!
'i' 0B-1F linux/ipmi.h conflict!
'i' 80-8F linux/i8k.h
'j' 00-3F linux/joystick.h
'k' 00-0F linux/spi/spidev.h conflict!
'k' 00-05 video/kyro.h conflict!
'l' 00-3F linux/tcfs_fs.h transparent cryptographic file system
<http://mikonos.dia.unisa.it/tcfs>
'l' 40-7F linux/udf_fs_i.h in development:
<http://sourceforge.net/projects/linux-udf/>
'm' 00-09 linux/mmtimer.h
'm' 00-09 linux/mmtimer.h conflict!
'm' all linux/mtio.h conflict!
'm' all linux/soundcard.h conflict!
'm' all linux/synclink.h conflict!
'm' 00-19 drivers/message/fusion/mptctl.h conflict!
'm' 00 drivers/scsi/megaraid/megaraid_ioctl.h conflict!
'm' 00-1F net/irda/irmod.h conflict!
'n' 00-7F linux/ncp_fs.h
'n' 00-7F linux/ncp_fs.h and fs/ncpfs/ioctl.c
'n' 80-8F linux/nilfs2_fs.h NILFS2
'n' E0-FF video/matrox.h matroxfb
'n' E0-FF linux/matroxfb.h matroxfb
'o' 00-1F fs/ocfs2/ocfs2_fs.h OCFS2
'o' 00-03 include/mtd/ubi-user.h conflict! (OCFS2 and UBI overlaps)
'o' 40-41 include/mtd/ubi-user.h UBI
'o' 01-A1 include/linux/dvb/*.h DVB
'o' 00-03 mtd/ubi-user.h conflict! (OCFS2 and UBI overlaps)
'o' 40-41 mtd/ubi-user.h UBI
'o' 01-A1 linux/dvb/*.h DVB
'p' 00-0F linux/phantom.h conflict! (OpenHaptics needs this)
'p' 00-1F linux/rtc.h conflict!
'p' 00-3F linux/mc146818rtc.h conflict!
'p' 40-7F linux/nvram.h
'p' 80-9F user-space parport
'p' 80-9F linux/ppdev.h user-space parport
<mailto:tim@cyberelk.net>
'p' a1-a4 linux/pps.h LinuxPPS
'p' A1-A4 linux/pps.h LinuxPPS
<mailto:giometti@linux.it>
'q' 00-1F linux/serio.h
'q' 80-FF Internet PhoneJACK, Internet LineJACK
<http://www.quicknet.net>
'r' 00-1F linux/msdos_fs.h
'q' 80-FF linux/telephony.h Internet PhoneJACK, Internet LineJACK
linux/ixjuser.h <http://www.quicknet.net>
'r' 00-1F linux/msdos_fs.h and fs/fat/dir.c
's' all linux/cdk.h
't' 00-7F linux/if_ppp.h
't' 80-8F linux/isdn_ppp.h
't' 90 linux/toshiba.h
'u' 00-1F linux/smb_fs.h
'v' 00-1F linux/ext2_fs.h conflict!
'v' all linux/videodev.h conflict!
'v' 00-1F linux/ext2_fs.h conflict!
'v' 00-1F linux/fs.h conflict!
'v' 00-0F linux/sonypi.h conflict!
'v' C0-CF drivers/media/video/ov511.h conflict!
'v' C0-DF media/pwc-ioctl.h conflict!
'v' C0-FF linux/meye.h conflict!
'v' C0-CF drivers/media/video/zoran/zoran.h conflict!
'v' D0-DF drivers/media/video/cpia2/cpia2dev.h conflict!
'w' all CERN SCI driver
'y' 00-1F packet based user level communications
<mailto:zapman@interlan.net>
'z' 00-3F CAN bus card
'z' 00-3F CAN bus card conflict!
<mailto:hdstich@connectu.ulm.circular.de>
'z' 40-7F CAN bus card
'z' 40-7F CAN bus card conflict!
<mailto:oe@port.de>
'z' 10-4F drivers/s390/crypto/zcrypt_api.h conflict!
0x80 00-1F linux/fb.h
0x81 00-1F linux/videotext.h
0x88 00-3F media/ovcamchip.h
0x89 00-06 arch/x86/include/asm/sockios.h
0x89 0B-DF linux/sockios.h
0x89 E0-EF linux/sockios.h SIOCPROTOPRIVATE range
0x89 E0-EF linux/dn.h PROTOPRIVATE range
0x89 F0-FF linux/sockios.h SIOCDEVPRIVATE range
0x8B all linux/wireless.h
0x8C 00-3F WiNRADiO driver
<http://www.proximity.com.au/~brian/winradio/>
0x90 00 drivers/cdrom/sbpcd.h
0x92 00-0F drivers/usb/mon/mon_bin.c
0x93 60-7F linux/auto_fs.h
0x94 all fs/btrfs/ioctl.h
0x99 00-0F 537-Addinboard driver
<mailto:buk@buks.ipn.de>
0xA0 all linux/sdp/sdp.h Industrial Device Project
@ -192,17 +302,22 @@ Code Seq# Include File Comments
0xAB 00-1F linux/nbd.h
0xAC 00-1F linux/raw.h
0xAD 00 Netfilter device in development:
<mailto:rusty@rustcorp.com.au>
<mailto:rusty@rustcorp.com.au>
0xAE all linux/kvm.h Kernel-based Virtual Machine
<mailto:kvm@vger.kernel.org>
0xB0 all RATIO devices in development:
<mailto:vgo@ratio.de>
0xB1 00-1F PPPoX <mailto:mostrows@styx.uwaterloo.ca>
0xC0 00-0F linux/usb/iowarrior.h
0xCB 00-1F CBM serial IEC bus in development:
<mailto:michael.klein@puffin.lb.shuttle.de>
0xCD 01 linux/reiserfs_fs.h
0xCF 02 fs/cifs/ioctl.c
0xDB 00-0F drivers/char/mwave/mwavepub.h
0xDD 00-3F ZFCP device driver see drivers/s390/scsi/
<mailto:aherrman@de.ibm.com>
0xF3 00-3F video/sisfb.h sisfb (in development)
0xF3 00-3F drivers/usb/misc/sisusbvga/sisusb.h sisfb (in development)
<mailto:thomas@winischhofer.net>
0xF4 00-1F video/mbxfb.h mbxfb
<mailto:raph@8d.com>
0xFD all linux/dm-ioctl.h

View File

@ -214,11 +214,13 @@ The format of the block comment is like this:
* (section header: (section description)? )*
(*)?*/
The short function description ***cannot be multiline***, but the other
descriptions can be (and they can contain blank lines). If you continue
that initial short description onto a second line, that second line will
appear further down at the beginning of the description section, which is
almost certainly not what you had in mind.
All "description" text can span multiple lines, although the
function_name & its short description are traditionally on a single line.
Description text may also contain blank lines (i.e., lines that contain
only a "*").
"section header:" names must be unique per function (or struct,
union, typedef, enum).
Avoid putting a spurious blank line after the function name, or else the
description will be repeated!

View File

@ -199,6 +199,10 @@ and is between 256 and 4096 characters. It is defined in the file
acpi_display_output=video
See above.
acpi_early_pdc_eval [HW,ACPI] Evaluate processor _PDC methods
early. Needed on some platforms to properly
initialize the EC.
acpi_irq_balance [HW,ACPI]
ACPI will balance active IRQs
default in APIC mode
@ -311,6 +315,11 @@ and is between 256 and 4096 characters. It is defined in the file
aic79xx= [HW,SCSI]
See Documentation/scsi/aic79xx.txt.
alignment= [KNL,ARM]
Allow the default userspace alignment fault handler
behaviour to be specified. Bit 0 enables warnings,
bit 1 enables fixups, and bit 2 sends a segfault.
amd_iommu= [HW,X86-84]
Pass parameters to the AMD IOMMU driver in the system.
Possible values are:

View File

@ -48,11 +48,11 @@ for LILO parameters for doing this:
This configures the first found 3c509 card for IRQ 10, base I/O 0x310, and
transceiver type 3 (10base2). The flag "0x3c509" must be set to avoid conflicts
with other card types when overriding the I/O address. When the driver is
loaded as a module, only the IRQ and transceiver setting may be overridden.
For example, setting two cards to 10base2/IRQ10 and AUI/IRQ11 is done by using
the xcvr and irq module options:
loaded as a module, only the IRQ may be overridden. For example,
setting two cards to IRQ10 and IRQ11 is done by using the irq module
option:
options 3c509 xcvr=3,1 irq=10,11
options 3c509 irq=10,11
(2) Full-duplex mode
@ -77,6 +77,8 @@ operation.
itself full-duplex capable. This is almost certainly one of two things: a full-
duplex-capable Ethernet switch (*not* a hub), or a full-duplex-capable NIC on
another system that's connected directly to the 3c509B via a crossover cable.
Full-duplex mode can be enabled using 'ethtool'.
/////Extremely important caution concerning full-duplex mode/////
Understand that the 3c509B's hardware's full-duplex support is much more
@ -113,6 +115,8 @@ This insured that merely upgrading the driver from an earlier version would
never automatically enable full-duplex mode in an existing installation;
it must always be explicitly enabled via one of these code in order to be
activated.
The transceiver type can be changed using 'ethtool'.
(4a) Interpretation of error messages and common problems

View File

@ -1,5 +1,6 @@
function tracer guts
====================
By Mike Frysinger
Introduction
------------
@ -53,14 +54,14 @@ size of the mcount call that is embedded in the function).
For example, if the function foo() calls bar(), when the bar() function calls
mcount(), the arguments mcount() will pass to the tracer are:
"frompc" - the address bar() will use to return to foo()
"selfpc" - the address bar() (with _mcount() size adjustment)
"selfpc" - the address bar() (with mcount() size adjustment)
Also keep in mind that this mcount function will be called *a lot*, so
optimizing for the default case of no tracer will help the smooth running of
your system when tracing is disabled. So the start of the mcount function is
typically the bare min with checking things before returning. That also means
the code flow should usually kept linear (i.e. no branching in the nop case).
This is of course an optimization and not a hard requirement.
typically the bare minimum with checking things before returning. That also
means the code flow should usually be kept linear (i.e. no branching in the nop
case). This is of course an optimization and not a hard requirement.
Here is some pseudo code that should help (these functions should actually be
implemented in assembly):
@ -131,10 +132,10 @@ some functions to save (hijack) and restore the return address.
The mcount function should check the function pointers ftrace_graph_return
(compare to ftrace_stub) and ftrace_graph_entry (compare to
ftrace_graph_entry_stub). If either of those are not set to the relevant stub
ftrace_graph_entry_stub). If either of those is not set to the relevant stub
function, call the arch-specific function ftrace_graph_caller which in turn
calls the arch-specific function prepare_ftrace_return. Neither of these
function names are strictly required, but you should use them anyways to stay
function names is strictly required, but you should use them anyway to stay
consistent across the architecture ports -- easier to compare & contrast
things.
@ -144,7 +145,7 @@ but the first argument should be a pointer to the "frompc". Typically this is
located on the stack. This allows the function to hijack the return address
temporarily to have it point to the arch-specific function return_to_handler.
That function will simply call the common ftrace_return_to_handler function and
that will return the original return address with which, you can return to the
that will return the original return address with which you can return to the
original call site.
Here is the updated mcount pseudo code:
@ -173,14 +174,16 @@ void ftrace_graph_caller(void)
unsigned long *frompc = &...;
unsigned long selfpc = <return address> - MCOUNT_INSN_SIZE;
prepare_ftrace_return(frompc, selfpc);
/* passing frame pointer up is optional -- see below */
prepare_ftrace_return(frompc, selfpc, frame_pointer);
/* restore all state needed by the ABI */
}
#endif
For information on how to implement prepare_ftrace_return(), simply look at
the x86 version. The only architecture-specific piece in it is the setup of
For information on how to implement prepare_ftrace_return(), simply look at the
x86 version (the frame pointer passing is optional; see the next section for
more information). The only architecture-specific piece in it is the setup of
the fault recovery table (the asm(...) code). The rest should be the same
across architectures.
@ -205,6 +208,23 @@ void return_to_handler(void)
#endif
HAVE_FUNCTION_GRAPH_FP_TEST
---------------------------
An arch may pass in a unique value (frame pointer) to both the entering and
exiting of a function. On exit, the value is compared and if it does not
match, then it will panic the kernel. This is largely a sanity check for bad
code generation with gcc. If gcc for your port sanely updates the frame
pointer under different opitmization levels, then ignore this option.
However, adding support for it isn't terribly difficult. In your assembly code
that calls prepare_ftrace_return(), pass the frame pointer as the 3rd argument.
Then in the C version of that function, do what the x86 port does and pass it
along to ftrace_push_return_trace() instead of a stub value of 0.
Similarly, when you call ftrace_return_to_handler(), pass it the frame pointer.
HAVE_FTRACE_NMI_ENTER
---------------------

View File

@ -1625,7 +1625,7 @@ If I am only interested in sys_nanosleep and hrtimer_interrupt:
# echo sys_nanosleep hrtimer_interrupt \
> set_ftrace_filter
# echo ftrace > current_tracer
# echo function > current_tracer
# echo 1 > tracing_enabled
# usleep 1
# echo 0 > tracing_enabled

View File

@ -44,7 +44,8 @@ Check for lost events.
Usage
-----
Make sure debugfs is mounted to /sys/kernel/debug. If not, (requires root privileges)
Make sure debugfs is mounted to /sys/kernel/debug.
If not (requires root privileges):
$ mount -t debugfs debugfs /sys/kernel/debug
Check that the driver you are about to trace is not loaded.
@ -91,7 +92,7 @@ $ dmesg > dmesg.txt
$ tar zcf pciid-nick-mmiotrace.tar.gz mydump.txt lspci.txt dmesg.txt
and then send the .tar.gz file. The trace compresses considerably. Replace
"pciid" and "nick" with the PCI ID or model name of your piece of hardware
under investigation and your nick name.
under investigation and your nickname.
How Mmiotrace Works
@ -100,7 +101,7 @@ How Mmiotrace Works
Access to hardware IO-memory is gained by mapping addresses from PCI bus by
calling one of the ioremap_*() functions. Mmiotrace is hooked into the
__ioremap() function and gets called whenever a mapping is created. Mapping is
an event that is recorded into the trace log. Note, that ISA range mappings
an event that is recorded into the trace log. Note that ISA range mappings
are not caught, since the mapping always exists and is returned directly.
MMIO accesses are recorded via page faults. Just before __ioremap() returns,
@ -122,11 +123,11 @@ Trace Log Format
----------------
The raw log is text and easily filtered with e.g. grep and awk. One record is
one line in the log. A record starts with a keyword, followed by keyword
dependant arguments. Arguments are separated by a space, or continue until the
one line in the log. A record starts with a keyword, followed by keyword-
dependent arguments. Arguments are separated by a space, or continue until the
end of line. The format for version 20070824 is as follows:
Explanation Keyword Space separated arguments
Explanation Keyword Space-separated arguments
---------------------------------------------------------------------------
read event R width, timestamp, map id, physical, value, PC, PID
@ -136,7 +137,7 @@ iounmap event UNMAP timestamp, map id, PC, PID
marker MARK timestamp, text
version VERSION the string "20070824"
info for reader LSPCI one line from lspci -v
PCI address map PCIDEV space separated /proc/bus/pci/devices data
PCI address map PCIDEV space-separated /proc/bus/pci/devices data
unk. opcode UNKNOWN timestamp, map id, physical, data, PC, PID
Timestamp is in seconds with decimals. Physical is a PCI bus address, virtual

View File

@ -33,9 +33,9 @@ head_page - a pointer to the page that the reader will use next
tail_page - a pointer to the page that will be written to next
commit_page - a pointer to the page with the last finished non nested write.
commit_page - a pointer to the page with the last finished non-nested write.
cmpxchg - hardware assisted atomic transaction that performs the following:
cmpxchg - hardware-assisted atomic transaction that performs the following:
A = B iff previous A == C
@ -52,15 +52,15 @@ The Generic Ring Buffer
The ring buffer can be used in either an overwrite mode or in
producer/consumer mode.
Producer/consumer mode is where the producer were to fill up the
Producer/consumer mode is where if the producer were to fill up the
buffer before the consumer could free up anything, the producer
will stop writing to the buffer. This will lose most recent events.
Overwrite mode is where the produce were to fill up the buffer
Overwrite mode is where if the producer were to fill up the buffer
before the consumer could free up anything, the producer will
overwrite the older data. This will lose the oldest events.
No two writers can write at the same time (on the same per cpu buffer),
No two writers can write at the same time (on the same per-cpu buffer),
but a writer may interrupt another writer, but it must finish writing
before the previous writer may continue. This is very important to the
algorithm. The writers act like a "stack". The way interrupts works
@ -79,16 +79,16 @@ the interrupt doing a write as well.
Readers can happen at any time. But no two readers may run at the
same time, nor can a reader preempt/interrupt another reader. A reader
can not preempt/interrupt a writer, but it may read/consume from the
cannot preempt/interrupt a writer, but it may read/consume from the
buffer at the same time as a writer is writing, but the reader must be
on another processor to do so. A reader may read on its own processor
and can be preempted by a writer.
A writer can preempt a reader, but a reader can not preempt a writer.
A writer can preempt a reader, but a reader cannot preempt a writer.
But a reader can read the buffer at the same time (on another processor)
as a writer.
The ring buffer is made up of a list of pages held together by a link list.
The ring buffer is made up of a list of pages held together by a linked list.
At initialization a reader page is allocated for the reader that is not
part of the ring buffer.
@ -102,7 +102,7 @@ the head page.
The reader has its own page to use. At start up time, this page is
allocated but is not attached to the list. When the reader wants
to read from the buffer, if its page is empty (like it is on start up)
to read from the buffer, if its page is empty (like it is on start-up),
it will swap its page with the head_page. The old reader page will
become part of the ring buffer and the head_page will be removed.
The page after the inserted page (old reader_page) will become the
@ -206,7 +206,7 @@ The main pointers:
commit page - the page that last finished a write.
The commit page only is updated by the outer most writer in the
The commit page only is updated by the outermost writer in the
writer stack. A writer that preempts another writer will not move the
commit page.
@ -281,7 +281,7 @@ with the previous write.
The commit pointer points to the last write location that was
committed without preempting another write. When a write that
preempted another write is committed, it only becomes a pending commit
and will not be a full commit till all writes have been committed.
and will not be a full commit until all writes have been committed.
The commit page points to the page that has the last full commit.
The tail page points to the page with the last write (before
@ -292,7 +292,7 @@ be several pages ahead. If the tail page catches up to the commit
page then no more writes may take place (regardless of the mode
of the ring buffer: overwrite and produce/consumer).
The order of pages are:
The order of pages is:
head page
commit page
@ -311,7 +311,7 @@ Possible scenario:
There is a special case that the head page is after either the commit page
and possibly the tail page. That is when the commit (and tail) page has been
swapped with the reader page. This is because the head page is always
part of the ring buffer, but the reader page is not. When ever there
part of the ring buffer, but the reader page is not. Whenever there
has been less than a full page that has been committed inside the ring buffer,
and a reader swaps out a page, it will be swapping out the commit page.
@ -338,7 +338,7 @@ and a reader swaps out a page, it will be swapping out the commit page.
In this case, the head page will not move when the tail and commit
move back into the ring buffer.
The reader can not swap a page into the ring buffer if the commit page
The reader cannot swap a page into the ring buffer if the commit page
is still on that page. If the read meets the last commit (real commit
not pending or reserved), then there is nothing more to read.
The buffer is considered empty until another full commit finishes.
@ -395,7 +395,7 @@ The main idea behind the lockless algorithm is to combine the moving
of the head_page pointer with the swapping of pages with the reader.
State flags are placed inside the pointer to the page. To do this,
each page must be aligned in memory by 4 bytes. This will allow the 2
least significant bits of the address to be used as flags. Since
least significant bits of the address to be used as flags, since
they will always be zero for the address. To get the address,
simply mask out the flags.
@ -460,7 +460,7 @@ When the reader tries to swap the page with the ring buffer, it
will also use cmpxchg. If the flag bit in the pointer to the
head page does not have the HEADER flag set, the compare will fail
and the reader will need to look for the new head page and try again.
Note, the flag UPDATE and HEADER are never set at the same time.
Note, the flags UPDATE and HEADER are never set at the same time.
The reader swaps the reader page as follows:
@ -539,7 +539,7 @@ updated to the reader page.
| +-----------------------------+ |
+------------------------------------+
Another important point. The page that the reader page points back to
Another important point: The page that the reader page points back to
by its previous pointer (the one that now points to the new head page)
never points back to the reader page. That is because the reader page is
not part of the ring buffer. Traversing the ring buffer via the next pointers
@ -572,7 +572,7 @@ not be able to swap the head page from the buffer, nor will it be able to
move the head page, until the writer is finished with the move.
This eliminates any races that the reader can have on the writer. The reader
must spin, and this is why the reader can not preempt the writer.
must spin, and this is why the reader cannot preempt the writer.
tail page
|
@ -659,9 +659,9 @@ before pushing the head page. If it is, then it can be assumed that the
tail page wrapped the buffer, and we must drop new writes.
This is not a race condition, because the commit page can only be moved
by the outter most writer (the writer that was preempted).
by the outermost writer (the writer that was preempted).
This means that the commit will not move while a writer is moving the
tail page. The reader can not swap the reader page if it is also being
tail page. The reader cannot swap the reader page if it is also being
used as the commit page. The reader can simply check that the commit
is off the reader page. Once the commit page leaves the reader page
it will never go back on it unless a reader does another swap with the
@ -733,7 +733,7 @@ The write converts the head page pointer to UPDATE.
--->| |<---| |<---| |<---| |<---
+---+ +---+ +---+ +---+
But if a nested writer preempts here. It will see that the next
But if a nested writer preempts here, it will see that the next
page is a head page, but it is also nested. It will detect that
it is nested and will save that information. The detection is the
fact that it sees the UPDATE flag instead of a HEADER or NORMAL
@ -761,7 +761,7 @@ to NORMAL.
--->| |<---| |<---| |<---| |<---
+---+ +---+ +---+ +---+
After the nested writer finishes, the outer most writer will convert
After the nested writer finishes, the outermost writer will convert
the UPDATE pointer to NORMAL.
@ -812,7 +812,7 @@ head page.
+---+ +---+ +---+ +---+
The nested writer moves the tail page forward. But does not set the old
update page to NORMAL because it is not the outer most writer.
update page to NORMAL because it is not the outermost writer.
tail page
|
@ -892,7 +892,7 @@ It will return to the first writer.
--->| |<---| |<---| |<---| |<---
+---+ +---+ +---+ +---+
The first writer can not know atomically test if the tail page moved
The first writer cannot know atomically if the tail page moved
while it updates the HEAD page. It will then update the head page to
what it thinks is the new head page.
@ -923,9 +923,9 @@ if the tail page is either where it use to be or on the next page:
--->| |<---| |<---| |<---| |<---
+---+ +---+ +---+ +---+
If tail page != A and tail page does not equal B, then it must reset the
pointer back to NORMAL. The fact that it only needs to worry about
nested writers, it only needs to check this after setting the HEAD page.
If tail page != A and tail page != B, then it must reset the pointer
back to NORMAL. The fact that it only needs to worry about nested
writers means that it only needs to check this after setting the HEAD page.
(first writer)
@ -939,7 +939,7 @@ nested writers, it only needs to check this after setting the HEAD page.
+---+ +---+ +---+ +---+
Now the writer can update the head page. This is also why the head page must
remain in UPDATE and only reset by the outer most writer. This prevents
remain in UPDATE and only reset by the outermost writer. This prevents
the reader from seeing the incorrect head page.

View File

@ -10,8 +10,8 @@ Tracepoints (see Documentation/trace/tracepoints.txt) can be used without
creating custom kernel modules to register probe functions using the event
tracing infrastructure.
Simplistically, tracepoints will represent an important event that when can
be taken in conjunction with other tracepoints to build a "Big Picture" of
Simplistically, tracepoints represent important events that can be
taken in conjunction with other tracepoints to build a "Big Picture" of
what is going on within the system. There are a large number of methods for
gathering and interpreting these events. Lacking any current Best Practises,
this document describes some of the methods that can be used.
@ -33,12 +33,12 @@ calling
will give a fair indication of the number of events available.
2.2 PCL
2.2 PCL (Performance Counters for Linux)
-------
Discovery and enumeration of all counters and events, including tracepoints
Discovery and enumeration of all counters and events, including tracepoints,
are available with the perf tool. Getting a list of available events is a
simple case of
simple case of:
$ perf list 2>&1 | grep Tracepoint
ext4:ext4_free_inode [Tracepoint event]
@ -49,19 +49,19 @@ simple case of
[ .... remaining output snipped .... ]
2. Enabling Events
3. Enabling Events
==================
2.1 System-Wide Event Enabling
3.1 System-Wide Event Enabling
------------------------------
See Documentation/trace/events.txt for a proper description on how events
can be enabled system-wide. A short example of enabling all events related
to page allocation would look something like
to page allocation would look something like:
$ for i in `find /sys/kernel/debug/tracing/events -name "enable" | grep mm_`; do echo 1 > $i; done
2.2 System-Wide Event Enabling with SystemTap
3.2 System-Wide Event Enabling with SystemTap
---------------------------------------------
In SystemTap, tracepoints are accessible using the kernel.trace() function
@ -86,7 +86,7 @@ were allocating the pages.
print_count()
}
2.3 System-Wide Event Enabling with PCL
3.3 System-Wide Event Enabling with PCL
---------------------------------------
By specifying the -a switch and analysing sleep, the system-wide events
@ -107,16 +107,16 @@ for a duration of time can be examined.
Similarly, one could execute a shell and exit it as desired to get a report
at that point.
2.4 Local Event Enabling
3.4 Local Event Enabling
------------------------
Documentation/trace/ftrace.txt describes how to enable events on a per-thread
basis using set_ftrace_pid.
2.5 Local Event Enablement with PCL
3.5 Local Event Enablement with PCL
-----------------------------------
Events can be activate and tracked for the duration of a process on a local
Events can be activated and tracked for the duration of a process on a local
basis using PCL such as follows.
$ perf stat -e kmem:mm_page_alloc -e kmem:mm_page_free_direct \
@ -131,18 +131,18 @@ basis using PCL such as follows.
0.973913387 seconds time elapsed
3. Event Filtering
4. Event Filtering
==================
Documentation/trace/ftrace.txt covers in-depth how to filter events in
ftrace. Obviously using grep and awk of trace_pipe is an option as well
as any script reading trace_pipe.
4. Analysing Event Variances with PCL
5. Analysing Event Variances with PCL
=====================================
Any workload can exhibit variances between runs and it can be important
to know what the standard deviation in. By and large, this is left to the
to know what the standard deviation is. By and large, this is left to the
performance analyst to do it by hand. In the event that the discrete event
occurrences are useful to the performance analyst, then perf can be used.
@ -166,7 +166,7 @@ In the event that some higher-level event is required that depends on some
aggregation of discrete events, then a script would need to be developed.
Using --repeat, it is also possible to view how events are fluctuating over
time on a system wide basis using -a and sleep.
time on a system-wide basis using -a and sleep.
$ perf stat -e kmem:mm_page_alloc -e kmem:mm_page_free_direct \
-e kmem:mm_pagevec_free \
@ -180,7 +180,7 @@ time on a system wide basis using -a and sleep.
1.002251757 seconds time elapsed ( +- 0.005% )
5. Higher-Level Analysis with Helper Scripts
6. Higher-Level Analysis with Helper Scripts
============================================
When events are enabled the events that are triggering can be read from
@ -190,11 +190,11 @@ be gathered on-line as appropriate. Examples of post-processing might include
o Reading information from /proc for the PID that triggered the event
o Deriving a higher-level event from a series of lower-level events.
o Calculate latencies between two events
o Calculating latencies between two events
Documentation/trace/postprocess/trace-pagealloc-postprocess.pl is an example
script that can read trace_pipe from STDIN or a copy of a trace. When used
on-line, it can be interrupted once to generate a report without existing
on-line, it can be interrupted once to generate a report without exiting
and twice to exit.
Simplistically, the script just reads STDIN and counts up events but it
@ -212,12 +212,12 @@ also can do more such as
processes, the parent process responsible for creating all the helpers
can be identified
6. Lower-Level Analysis with PCL
7. Lower-Level Analysis with PCL
================================
There may also be a requirement to identify what functions with a program
There may also be a requirement to identify what functions within a program
were generating events within the kernel. To begin this sort of analysis, the
data must be recorded. At the time of writing, this required root
data must be recorded. At the time of writing, this required root:
$ perf record -c 1 \
-e kmem:mm_page_alloc -e kmem:mm_page_free_direct \
@ -253,11 +253,11 @@ perf report.
# (For more details, try: perf report --sort comm,dso,symbol)
#
According to this, the vast majority of events occured triggered on events
within the VDSO. With simple binaries, this will often be the case so lets
According to this, the vast majority of events triggered on events
within the VDSO. With simple binaries, this will often be the case so let's
take a slightly different example. In the course of writing this, it was
noticed that X was generating an insane amount of page allocations so lets look
at it
noticed that X was generating an insane amount of page allocations so let's look
at it:
$ perf record -c 1 -f \
-e kmem:mm_page_alloc -e kmem:mm_page_free_direct \
@ -280,8 +280,8 @@ This was interrupted after a few seconds and
# (For more details, try: perf report --sort comm,dso,symbol)
#
So, almost half of the events are occuring in a library. To get an idea which
symbol.
So, almost half of the events are occurring in a library. To get an idea which
symbol:
$ perf report --sort comm,dso,symbol
# Samples: 27666
@ -297,7 +297,7 @@ symbol.
0.01% Xorg /opt/gfx-test/lib/libpixman-1.so.0.13.1 [.] get_fast_path
0.00% Xorg [kernel] [k] ftrace_trace_userstack
To see where within the function pixmanFillsse2 things are going wrong
To see where within the function pixmanFillsse2 things are going wrong:
$ perf annotate pixmanFillsse2
[ ... ]

View File

@ -410,9 +410,8 @@ F: drivers/i2c/busses/i2c-ali1563.c
ALPHA PORT
M: Richard Henderson <rth@twiddle.net>
S: Odd Fixes for 2.4; Maintained for 2.6.
M: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
S: Maintained for 2.4; PCI support for 2.6.
M: Matt Turner <mattst88@gmail.com>
L: linux-alpha@vger.kernel.org
F: arch/alpha/
@ -617,10 +616,10 @@ M: Richard Purdie <rpurdie@rpsys.net>
S: Maintained
ARM/CORTINA SYSTEMS GEMINI ARM ARCHITECTURE
M: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
M: Paulius Zaleckas <paulius.zaleckas@gmail.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
T: git git://gitorious.org/linux-gemini/mainline.git
S: Maintained
S: Odd Fixes
F: arch/arm/mach-gemini/
ARM/EBSA110 MACHINE SUPPORT
@ -642,9 +641,9 @@ T: topgit git://git.openezx.org/openezx.git
F: arch/arm/mach-pxa/ezx.c
ARM/FARADAY FA526 PORT
M: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
M: Paulius Zaleckas <paulius.zaleckas@gmail.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
S: Odd Fixes
F: arch/arm/mm/*-fa*
ARM/FOOTBRIDGE ARCHITECTURE
@ -988,7 +987,6 @@ F: drivers/platform/x86/asus-laptop.c
ASYNCHRONOUS TRANSFERS/TRANSFORMS (IOAT) API
M: Dan Williams <dan.j.williams@intel.com>
M: Maciej Sosnowski <maciej.sosnowski@intel.com>
W: http://sourceforge.net/projects/xscaleiop
S: Supported
F: Documentation/crypto/async-tx-api.txt
@ -1638,9 +1636,8 @@ S: Maintained
F: sound/pci/cs5535audio/
CX18 VIDEO4LINUX DRIVER
M: Hans Verkuil <hverkuil@xs4all.nl>
M: Andy Walls <awalls@radix.net>
L: ivtv-devel@ivtvdriver.org
L: ivtv-devel@ivtvdriver.org (moderated for non-subscribers)
L: linux-media@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
W: http://linuxtv.org
@ -1736,10 +1733,9 @@ F: include/linux/tfrc.h
F: net/dccp/
DECnet NETWORK LAYER
M: Christine Caulfield <christine.caulfield@googlemail.com>
W: http://linux-decnet.sourceforge.net
L: linux-decnet-user@lists.sourceforge.net
S: Maintained
S: Orphan
F: Documentation/networking/decnet.txt
F: net/decnet/
@ -1825,7 +1821,6 @@ S: Supported
F: fs/dlm/
DMA GENERIC OFFLOAD ENGINE SUBSYSTEM
M: Maciej Sosnowski <maciej.sosnowski@intel.com>
M: Dan Williams <dan.j.williams@intel.com>
S: Supported
F: drivers/dma/
@ -2169,10 +2164,9 @@ F: drivers/hwmon/f75375s.c
F: include/linux/f75375s.h
FIREWIRE SUBSYSTEM
M: Kristian Hoegsberg <krh@redhat.com>
M: Stefan Richter <stefanr@s5r6.in-berlin.de>
L: linux1394-devel@lists.sourceforge.net
W: http://www.linux1394.org/
W: http://ieee1394.wiki.kernel.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6.git
S: Maintained
F: drivers/firewire/
@ -2705,22 +2699,14 @@ S: Supported
F: drivers/idle/i7300_idle.c
IEEE 1394 SUBSYSTEM
M: Ben Collins <ben.collins@ubuntu.com>
M: Stefan Richter <stefanr@s5r6.in-berlin.de>
L: linux1394-devel@lists.sourceforge.net
W: http://www.linux1394.org/
W: http://ieee1394.wiki.kernel.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6.git
S: Maintained
S: Obsolete
F: Documentation/debugging-via-ohci1394.txt
F: drivers/ieee1394/
IEEE 1394 RAW I/O DRIVER
M: Dan Dennedy <dan@dennedy.org>
M: Stefan Richter <stefanr@s5r6.in-berlin.de>
L: linux1394-devel@lists.sourceforge.net
S: Maintained
F: drivers/ieee1394/raw1394*
IEEE 802.15.4 SUBSYSTEM
M: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
M: Sergey Lapin <slapin@ossfans.org>
@ -2797,7 +2783,7 @@ F: arch/x86/kernel/microcode_core.c
F: arch/x86/kernel/microcode_intel.c
INTEL I/OAT DMA DRIVER
M: Maciej Sosnowski <maciej.sosnowski@intel.com>
M: Dan Williams <dan.j.williams@intel.com>
S: Supported
F: drivers/dma/ioat*
@ -2835,10 +2821,11 @@ L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/ixp2000/
INTEL ETHERNET DRIVERS (e100/e1000/e1000e/igb/ixgb/ixgbe)
INTEL ETHERNET DRIVERS (e100/e1000/e1000e/igb/igbvf/ixgb/ixgbe)
M: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
M: Jesse Brandeburg <jesse.brandeburg@intel.com>
M: Bruce Allan <bruce.w.allan@intel.com>
M: Alex Duyck <alexander.h.duyck@intel.com>
M: PJ Waskiewicz <peter.p.waskiewicz.jr@intel.com>
M: John Ronciak <john.ronciak@intel.com>
L: e1000-devel@lists.sourceforge.net
@ -2848,6 +2835,7 @@ F: drivers/net/e100.c
F: drivers/net/e1000/
F: drivers/net/e1000e/
F: drivers/net/igb/
F: drivers/net/igbvf/
F: drivers/net/ixgb/
F: drivers/net/ixgbe/
@ -3021,8 +3009,8 @@ S: Maintained
F: drivers/isdn/hardware/eicon/
IVTV VIDEO4LINUX DRIVER
M: Hans Verkuil <hverkuil@xs4all.nl>
L: ivtv-devel@ivtvdriver.org
M: Andy Walls <awalls@radix.net>
L: ivtv-devel@ivtvdriver.org (moderated for non-subscribers)
L: linux-media@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
W: http://www.ivtvdriver.org
@ -3422,8 +3410,10 @@ S: Maintained
F: drivers/scsi/sym53c8xx_2/
LTP (Linux Test Project)
M: Subrata Modak <subrata@linux.vnet.ibm.com>
M: Mike Frysinger <vapier@gentoo.org>
M: Rishikesh K Rajak <risrajak@linux.vnet.ibm.com>
M: Garrett Cooper <yanegomi@gmail.com>
M: Mike Frysinger <vapier@gentoo.org>
M: Subrata Modak <subrata@linux.vnet.ibm.com>
L: ltp-list@lists.sourceforge.net (subscribers-only)
W: http://ltp.sourceforge.net/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/galak/ltp.git
@ -3847,6 +3837,7 @@ NETWORKING DRIVERS
L: netdev@vger.kernel.org
W: http://www.linuxfoundation.org/en/Net
T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6.git
S: Odd Fixes
F: drivers/net/
F: include/linux/if_*
@ -3882,7 +3873,7 @@ F: drivers/net/ni5010.*
NILFS2 FILESYSTEM
M: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp>
L: users@nilfs.org
L: linux-nilfs@vger.kernel.org
W: http://www.nilfs.org/en/
S: Supported
F: Documentation/filesystems/nilfs2.txt
@ -3949,29 +3940,20 @@ S: Maintained
F: sound/soc/omap/
OMAP FRAMEBUFFER SUPPORT
M: Imre Deak <imre.deak@nokia.com>
M: Tomi Valkeinen <tomi.valkeinen@nokia.com>
L: linux-fbdev@vger.kernel.org
L: linux-omap@vger.kernel.org
S: Maintained
F: drivers/video/omap/
OMAP DISPLAY SUBSYSTEM SUPPORT (DSS2)
OMAP DISPLAY SUBSYSTEM and FRAMEBUFFER SUPPORT (DSS2)
M: Tomi Valkeinen <tomi.valkeinen@nokia.com>
L: linux-omap@vger.kernel.org
L: linux-fbdev@vger.kernel.org (moderated for non-subscribers)
L: linux-fbdev@vger.kernel.org
S: Maintained
F: drivers/video/omap2/dss/
F: drivers/video/omap2/vrfb.c
F: drivers/video/omap2/vram.c
F: drivers/video/omap2/
F: Documentation/arm/OMAP/DSS
OMAP FRAMEBUFFER SUPPORT (FOR DSS2)
M: Tomi Valkeinen <tomi.valkeinen@nokia.com>
L: linux-omap@vger.kernel.org
L: linux-fbdev@vger.kernel.org (moderated for non-subscribers)
S: Maintained
F: drivers/video/omap2/omapfb/
OMAP MMC SUPPORT
M: Jarkko Lavinen <jarkko.lavinen@nokia.com>
L: linux-omap@vger.kernel.org

View File

@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 33
EXTRAVERSION = -rc2
EXTRAVERSION = -rc8
NAME = Man-Eating Seals of Antiquity
# *DOCUMENTATION*
@ -18,10 +18,9 @@ MAKEFLAGS += -rR --no-print-directory
# Avoid funny character set dependencies
unexport LC_ALL
LC_CTYPE=C
LC_COLLATE=C
LC_NUMERIC=C
export LC_CTYPE LC_COLLATE LC_NUMERIC
export LC_COLLATE LC_NUMERIC
# We are using a recursive build, so we need to do a little thinking
# to get the ordering right.

View File

@ -28,6 +28,9 @@ static const struct cpumask *cpumask_of_node(int node)
{
int cpu;
if (node == -1)
return cpu_all_mask;
cpumask_clear(&node_to_cpumask_map[node]);
for_each_online_cpu(cpu) {

View File

@ -18,6 +18,8 @@ config ARM
select HAVE_KRETPROBES if (HAVE_KPROBES)
select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
select HAVE_GENERIC_DMA_COHERENT
select HAVE_KERNEL_GZIP
select HAVE_KERNEL_LZO
help
The ARM series is a line of low-power-consumption RISC chip designs
licensed by ARM Ltd and targeted at embedded applications and
@ -688,6 +690,7 @@ config ARCH_DAVINCI
select HAVE_IDE
select COMMON_CLKDEV
select GENERIC_ALLOCATOR
select ARCH_HAS_HOLES_MEMORYMODEL
help
Support for TI's DaVinci platform.
@ -699,6 +702,7 @@ config ARCH_OMAP
select ARCH_HAS_CPUFREQ
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select ARCH_HAS_HOLES_MEMORYMODEL
help
Support for TI's OMAP platform (OMAP1 and OMAP2).
@ -726,14 +730,26 @@ config ARCH_U8500
endchoice
source "arch/arm/mach-aaec2000/Kconfig"
source "arch/arm/mach-at91/Kconfig"
source "arch/arm/mach-bcmring/Kconfig"
source "arch/arm/mach-clps711x/Kconfig"
source "arch/arm/mach-davinci/Kconfig"
source "arch/arm/mach-dove/Kconfig"
source "arch/arm/mach-ep93xx/Kconfig"
source "arch/arm/mach-footbridge/Kconfig"
source "arch/arm/mach-gemini/Kconfig"
source "arch/arm/mach-h720x/Kconfig"
source "arch/arm/mach-integrator/Kconfig"
source "arch/arm/mach-iop32x/Kconfig"
@ -748,16 +764,26 @@ source "arch/arm/mach-ixp2000/Kconfig"
source "arch/arm/mach-ixp23xx/Kconfig"
source "arch/arm/mach-kirkwood/Kconfig"
source "arch/arm/mach-ks8695/Kconfig"
source "arch/arm/mach-lh7a40x/Kconfig"
source "arch/arm/mach-loki/Kconfig"
source "arch/arm/mach-msm/Kconfig"
source "arch/arm/mach-mv78xx0/Kconfig"
source "arch/arm/mach-pxa/Kconfig"
source "arch/arm/plat-pxa/Kconfig"
source "arch/arm/plat-mxc/Kconfig"
source "arch/arm/mach-mmp/Kconfig"
source "arch/arm/mach-netx/Kconfig"
source "arch/arm/mach-sa1100/Kconfig"
source "arch/arm/mach-nomadik/Kconfig"
source "arch/arm/plat-nomadik/Kconfig"
source "arch/arm/mach-ns9xxx/Kconfig"
source "arch/arm/plat-omap/Kconfig"
@ -767,9 +793,14 @@ source "arch/arm/mach-omap2/Kconfig"
source "arch/arm/mach-orion5x/Kconfig"
source "arch/arm/mach-kirkwood/Kconfig"
source "arch/arm/mach-pxa/Kconfig"
source "arch/arm/plat-pxa/Kconfig"
source "arch/arm/mach-dove/Kconfig"
source "arch/arm/mach-mmp/Kconfig"
source "arch/arm/mach-realview/Kconfig"
source "arch/arm/mach-sa1100/Kconfig"
source "arch/arm/plat-samsung/Kconfig"
source "arch/arm/plat-s3c24xx/Kconfig"
@ -797,41 +828,14 @@ if ARCH_S5PC1XX
source "arch/arm/mach-s5pc100/Kconfig"
endif
source "arch/arm/mach-lh7a40x/Kconfig"
source "arch/arm/mach-u300/Kconfig"
source "arch/arm/mach-h720x/Kconfig"
source "arch/arm/mach-ux500/Kconfig"
source "arch/arm/mach-versatile/Kconfig"
source "arch/arm/mach-aaec2000/Kconfig"
source "arch/arm/mach-realview/Kconfig"
source "arch/arm/mach-at91/Kconfig"
source "arch/arm/plat-mxc/Kconfig"
source "arch/arm/mach-nomadik/Kconfig"
source "arch/arm/plat-nomadik/Kconfig"
source "arch/arm/mach-netx/Kconfig"
source "arch/arm/mach-ns9xxx/Kconfig"
source "arch/arm/mach-davinci/Kconfig"
source "arch/arm/mach-ks8695/Kconfig"
source "arch/arm/mach-msm/Kconfig"
source "arch/arm/mach-u300/Kconfig"
source "arch/arm/mach-w90x900/Kconfig"
source "arch/arm/mach-bcmring/Kconfig"
source "arch/arm/mach-ux500/Kconfig"
# Definitions to make life easier
config ARCH_ACORN
bool

View File

@ -94,7 +94,7 @@ CFLAGS_ABI +=-funwind-tables
endif
ifeq ($(CONFIG_THUMB2_KERNEL),y)
AFLAGS_AUTOIT :=$(call as-option,-Wa$(comma)-mimplicit-it=thumb,-Wa$(comma)-mauto-it)
AFLAGS_AUTOIT :=$(call as-option,-Wa$(comma)-mimplicit-it=always,-Wa$(comma)-mauto-it)
AFLAGS_NOWARN :=$(call as-option,-Wa$(comma)-mno-warn-deprecated,-Wa$(comma)-W)
CFLAGS_THUMB2 :=-mthumb $(AFLAGS_AUTOIT) $(AFLAGS_NOWARN)
AFLAGS_THUMB2 :=$(CFLAGS_THUMB2) -Wa$(comma)-mthumb
@ -146,6 +146,7 @@ machine-$(CONFIG_ARCH_MX1) := mx1
machine-$(CONFIG_ARCH_MX2) := mx2
machine-$(CONFIG_ARCH_MX25) := mx25
machine-$(CONFIG_ARCH_MX3) := mx3
machine-$(CONFIG_ARCH_MXC91231) := mxc91231
machine-$(CONFIG_ARCH_NETX) := netx
machine-$(CONFIG_ARCH_NOMADIK) := nomadik
machine-$(CONFIG_ARCH_NS9XXX) := ns9xxx
@ -171,12 +172,12 @@ machine-$(CONFIG_ARCH_U8500) := ux500
machine-$(CONFIG_ARCH_VERSATILE) := versatile
machine-$(CONFIG_ARCH_W90X900) := w90x900
machine-$(CONFIG_FOOTBRIDGE) := footbridge
machine-$(CONFIG_ARCH_MXC91231) := mxc91231
# Platform directory name. This list is sorted alphanumerically
# by CONFIG_* macro name.
plat-$(CONFIG_ARCH_MXC) := mxc
plat-$(CONFIG_ARCH_OMAP) := omap
plat-$(CONFIG_ARCH_STMP3XXX) := stmp3xxx
plat-$(CONFIG_PLAT_IOP) := iop
plat-$(CONFIG_PLAT_NOMADIK) := nomadik
plat-$(CONFIG_PLAT_ORION) := orion
@ -184,7 +185,6 @@ plat-$(CONFIG_PLAT_PXA) := pxa
plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx s3c samsung
plat-$(CONFIG_PLAT_S3C64XX) := s3c64xx s3c samsung
plat-$(CONFIG_PLAT_S5PC1XX) := s5pc1xx s3c samsung
plat-$(CONFIG_ARCH_STMP3XXX) := stmp3xxx
ifeq ($(CONFIG_ARCH_EBSA110),y)
# This is what happens if you forget the IOCS16 line.

View File

@ -63,8 +63,12 @@ endif
SEDFLAGS = s/TEXT_START/$(ZTEXTADDR)/;s/BSS_START/$(ZBSSADDR)/
targets := vmlinux vmlinux.lds piggy.gz piggy.o font.o font.c \
head.o misc.o $(OBJS)
suffix_$(CONFIG_KERNEL_GZIP) = gzip
suffix_$(CONFIG_KERNEL_LZO) = lzo
targets := vmlinux vmlinux.lds \
piggy.$(suffix_y) piggy.$(suffix_y).o \
font.o font.c head.o misc.o $(OBJS)
ifeq ($(CONFIG_FUNCTION_TRACER),y)
ORIG_CFLAGS := $(KBUILD_CFLAGS)
@ -87,22 +91,34 @@ endif
ifneq ($(PARAMS_PHYS),)
LDFLAGS_vmlinux += --defsym params_phys=$(PARAMS_PHYS)
endif
LDFLAGS_vmlinux += -p --no-undefined -X \
$(shell $(CC) $(KBUILD_CFLAGS) --print-libgcc-file-name) -T
# ?
LDFLAGS_vmlinux += -p
# Report unresolved symbol references
LDFLAGS_vmlinux += --no-undefined
# Delete all temporary local symbols
LDFLAGS_vmlinux += -X
# Next argument is a linker script
LDFLAGS_vmlinux += -T
# For __aeabi_uidivmod
lib1funcs = $(obj)/lib1funcs.o
$(obj)/lib1funcs.S: $(srctree)/arch/$(SRCARCH)/lib/lib1funcs.S FORCE
$(call cmd,shipped)
# Don't allow any static data in misc.o, which
# would otherwise mess up our GOT table
CFLAGS_misc.o := -Dstatic=
$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.o \
$(addprefix $(obj)/, $(OBJS)) FORCE
$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.$(suffix_y).o \
$(addprefix $(obj)/, $(OBJS)) $(lib1funcs) FORCE
$(call if_changed,ld)
@:
$(obj)/piggy.gz: $(obj)/../Image FORCE
$(call if_changed,gzip)
$(obj)/piggy.$(suffix_y): $(obj)/../Image FORCE
$(call if_changed,$(suffix_y))
$(obj)/piggy.o: $(obj)/piggy.gz FORCE
$(obj)/piggy.$(suffix_y).o: $(obj)/piggy.$(suffix_y) FORCE
CFLAGS_font.o := -Dstatic=

View File

@ -27,6 +27,14 @@
.macro writeb, ch, rb
mcr p14, 0, \ch, c0, c5, 0
.endm
#elif defined(CONFIG_CPU_V7)
.macro loadsp, rb
.endm
.macro writeb, ch, rb
wait: mrc p14, 0, pc, c0, c1, 0
bcs wait
mcr p14, 0, \ch, c0, c5, 0
.endm
#elif defined(CONFIG_CPU_XSCALE)
.macro loadsp, rb
.endm

View File

@ -18,10 +18,15 @@
unsigned int __machine_arch_type;
#define _LINUX_STRING_H_
#include <linux/compiler.h> /* for inline */
#include <linux/types.h> /* for size_t */
#include <linux/stddef.h> /* for NULL */
#include <asm/string.h>
#include <linux/linkage.h>
#include <asm/unaligned.h>
#ifdef STANDALONE_DEBUG
#define putstr printf
@ -48,6 +53,18 @@ static void icedcc_putc(int ch)
asm("mcr p14, 0, %0, c0, c5, 0" : : "r" (ch));
}
#elif defined(CONFIG_CPU_V7)
static void icedcc_putc(int ch)
{
asm(
"wait: mrc p14, 0, pc, c0, c1, 0 \n\
bcs wait \n\
mcr p14, 0, %0, c0, c5, 0 "
: : "r" (ch));
}
#elif defined(CONFIG_CPU_XSCALE)
static void icedcc_putc(int ch)
@ -83,7 +100,6 @@ static void icedcc_putc(int ch)
#endif
#define putc(ch) icedcc_putc(ch)
#define flush() do { } while (0)
#endif
static void putstr(const char *ptr)
@ -188,34 +204,8 @@ static inline __ptr_t memcpy(__ptr_t __dest, __const __ptr_t __src,
/*
* gzip delarations
*/
#define OF(args) args
#define STATIC static
typedef unsigned char uch;
typedef unsigned short ush;
typedef unsigned long ulg;
#define WSIZE 0x8000 /* Window size must be at least 32k, */
/* and a power of two */
static uch *inbuf; /* input buffer */
static uch window[WSIZE]; /* Sliding window buffer */
static unsigned insize; /* valid bytes in inbuf */
static unsigned inptr; /* index of next byte to be processed in inbuf */
static unsigned outcnt; /* bytes in output buffer */
/* gzip flag byte */
#define ASCII_FLAG 0x01 /* bit 0 set: file probably ascii text */
#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */
#define ORIG_NAME 0x08 /* bit 3 set: original file name present */
#define COMMENT 0x10 /* bit 4 set: file comment present */
#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */
#define RESERVED 0xC0 /* bit 6,7: reserved */
#define get_byte() (inptr < insize ? inbuf[inptr++] : fill_inbuf())
/* Diagnostic functions */
#ifdef DEBUG
# define Assert(cond,msg) {if(!(cond)) error(msg);}
@ -233,24 +223,20 @@ static unsigned outcnt; /* bytes in output buffer */
# define Tracecv(c,x)
#endif
static int fill_inbuf(void);
static void flush_window(void);
static void error(char *m);
extern char input_data[];
extern char input_data_end[];
static uch *output_data;
static ulg output_ptr;
static ulg bytes_out;
static unsigned char *output_data;
static unsigned long output_ptr;
static void error(char *m);
static void putstr(const char *);
extern int end;
static ulg free_mem_ptr;
static ulg free_mem_end_ptr;
static unsigned long free_mem_ptr;
static unsigned long free_mem_end_ptr;
#ifdef STANDALONE_DEBUG
#define NO_INFLATE_MALLOC
@ -258,46 +244,13 @@ static ulg free_mem_end_ptr;
#define ARCH_HAS_DECOMP_WDOG
#include "../../../../lib/inflate.c"
#ifdef CONFIG_KERNEL_GZIP
#include "../../../../lib/decompress_inflate.c"
#endif
/* ===========================================================================
* Fill the input buffer. This is called only when the buffer is empty
* and at least one byte is really needed.
*/
int fill_inbuf(void)
{
if (insize != 0)
error("ran out of input data");
inbuf = input_data;
insize = &input_data_end[0] - &input_data[0];
inptr = 1;
return inbuf[0];
}
/* ===========================================================================
* Write the output window window[0..outcnt-1] and update crc and bytes_out.
* (Used for the decompressed data only.)
*/
void flush_window(void)
{
ulg c = crc;
unsigned n;
uch *in, *out, ch;
in = window;
out = &output_data[output_ptr];
for (n = 0; n < outcnt; n++) {
ch = *out++ = *in++;
c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
}
crc = c;
bytes_out += (ulg)outcnt;
output_ptr += (ulg)outcnt;
outcnt = 0;
putstr(".");
}
#ifdef CONFIG_KERNEL_LZO
#include "../../../../lib/decompress_unlzo.c"
#endif
#ifndef arch_error
#define arch_error(x)
@ -314,22 +267,33 @@ static void error(char *x)
while(1); /* Halt */
}
asmlinkage void __div0(void)
{
error("Attempting division by 0!");
}
#ifndef STANDALONE_DEBUG
ulg
decompress_kernel(ulg output_start, ulg free_mem_ptr_p, ulg free_mem_ptr_end_p,
int arch_id)
unsigned long
decompress_kernel(unsigned long output_start, unsigned long free_mem_ptr_p,
unsigned long free_mem_ptr_end_p,
int arch_id)
{
output_data = (uch *)output_start; /* Points to kernel start */
unsigned char *tmp;
output_data = (unsigned char *)output_start;
free_mem_ptr = free_mem_ptr_p;
free_mem_end_ptr = free_mem_ptr_end_p;
__machine_arch_type = arch_id;
arch_decomp_setup();
makecrc();
tmp = (unsigned char *) (((unsigned long)input_data_end) - 4);
output_ptr = get_unaligned_le32(tmp);
putstr("Uncompressing Linux...");
gunzip();
decompress(input_data, input_data_end - input_data,
NULL, NULL, output_data, NULL, error);
putstr(" done, booting the kernel.\n");
return output_ptr;
}
@ -341,11 +305,10 @@ int main()
{
output_data = output_buffer;
makecrc();
putstr("Uncompressing Linux...");
gunzip();
decompress(input_data, input_data_end - input_data,
NULL, NULL, output_data, NULL, error);
putstr("done.\n");
return 0;
}
#endif

View File

@ -0,0 +1,6 @@
.section .piggydata,#alloc
.globl input_data
input_data:
.incbin "arch/arm/boot/compressed/piggy.gzip"
.globl input_data_end
input_data_end:

View File

@ -1,6 +1,6 @@
.section .piggydata,#alloc
.globl input_data
input_data:
.incbin "arch/arm/boot/compressed/piggy.gz"
.incbin "arch/arm/boot/compressed/piggy.lzo"
.globl input_data_end
input_data_end:

View File

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.32-rc5
# Sat Oct 17 23:32:24 2009
# Linux kernel version: 2.6.33-rc2
# Wed Jan 6 00:01:36 2010
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@ -46,6 +46,7 @@ CONFIG_SYSVIPC_SYSCTL=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@ -119,14 +120,41 @@ CONFIG_BLOCK=y
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
# CONFIG_DEFAULT_AS is not set
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
# CONFIG_INLINE_SPIN_UNLOCK is not set
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
# CONFIG_INLINE_READ_UNLOCK is not set
# CONFIG_INLINE_READ_UNLOCK_BH is not set
# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
# CONFIG_INLINE_WRITE_UNLOCK is not set
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@ -155,6 +183,7 @@ CONFIG_MMU=y
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_DOVE is not set
# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_LOKI is not set
# CONFIG_ARCH_MV78XX0 is not set
@ -177,6 +206,7 @@ CONFIG_ARCH_U300=y
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_BCMRING is not set
# CONFIG_ARCH_U8500 is not set
#
# ST-Ericsson AB U300/U330/U335/U365 Platform
@ -265,12 +295,10 @@ CONFIG_FLATMEM_MANUAL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4096
CONFIG_SPLIT_PTLOCK_CPUS=999999
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ALIGNMENT_TRAP=y
@ -499,14 +527,21 @@ CONFIG_MTD_NAND_IDS=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
#
# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_AD525X_DPOT is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_ISL29003 is not set
# CONFIG_DS1682 is not set
# CONFIG_TI_DAC7512 is not set
# CONFIG_C2PORT is not set
#
@ -517,6 +552,7 @@ CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_IWMC3200TOP is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@ -539,6 +575,7 @@ CONFIG_HAVE_IDE=y
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@ -645,7 +682,6 @@ CONFIG_I2C_STU300=y
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@ -661,6 +697,8 @@ CONFIG_SPI_MASTER=y
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_GPIO is not set
CONFIG_SPI_PL022=y
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_DESIGNWARE is not set
#
# SPI Protocol Masters
@ -708,6 +746,7 @@ CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
@ -716,6 +755,8 @@ CONFIG_SSB_POSSIBLE=y
CONFIG_AB3100_CORE=y
CONFIG_AB3100_OTP=y
# CONFIG_EZX_PCAP is not set
# CONFIG_MFD_88PM8607 is not set
# CONFIG_AB4500_CORE is not set
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
@ -723,6 +764,7 @@ CONFIG_REGULATOR=y
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
# CONFIG_REGULATOR_BQ24022 is not set
# CONFIG_REGULATOR_MAX1586 is not set
# CONFIG_REGULATOR_MAX8660 is not set
# CONFIG_REGULATOR_LP3971 is not set
CONFIG_REGULATOR_AB3100=y
# CONFIG_REGULATOR_TPS65023 is not set
@ -840,7 +882,9 @@ CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_REGULATOR is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_LT3593 is not set
#
# LED Triggers
@ -882,6 +926,7 @@ CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
@ -911,7 +956,9 @@ CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
CONFIG_RTC_DRV_AB3100=y
@ -926,6 +973,15 @@ CONFIG_DMADEVICES=y
#
# DMA Devices
#
CONFIG_COH901318=y
CONFIG_DMA_ENGINE=y
#
# DMA Clients
#
# CONFIG_NET_DMA is not set
# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
@ -1018,7 +1074,7 @@ CONFIG_MISC_FILESYSTEMS=y
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
@ -1135,6 +1191,7 @@ CONFIG_ARM_UNWIND=y
# CONFIG_DEBUG_ERRORS is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_LL is not set
# CONFIG_OC_ETM is not set
#
# Security options
@ -1142,7 +1199,11 @@ CONFIG_ARM_UNWIND=y
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_DEFAULT_SECURITY_SELINUX is not set
# CONFIG_DEFAULT_SECURITY_SMACK is not set
# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
# CONFIG_CRYPTO is not set
# CONFIG_BINARY_PRINTF is not set

View File

@ -42,7 +42,8 @@
#endif
#if defined(CONFIG_CPU_ARM920T) || defined(CONFIG_CPU_ARM922T) || \
defined(CONFIG_CPU_ARM925T) || defined(CONFIG_CPU_ARM1020)
defined(CONFIG_CPU_ARM925T) || defined(CONFIG_CPU_ARM1020) || \
defined(CONFIG_CPU_ARM1026)
# define MULTI_CACHE 1
#endif
@ -154,16 +155,16 @@
* Please note that the implementation of these, and the required
* effects are cache-type (VIVT/VIPT/PIPT) specific.
*
* flush_cache_kern_all()
* flush_kern_all()
*
* Unconditionally clean and invalidate the entire cache.
*
* flush_cache_user_mm(mm)
* flush_user_all()
*
* Clean and invalidate all user space cache entries
* before a change of page tables.
*
* flush_cache_user_range(start, end, flags)
* flush_user_range(start, end, flags)
*
* Clean and invalidate a range of cache entries in the
* specified address space before a change of page tables.
@ -179,6 +180,20 @@
* - start - virtual start address
* - end - virtual end address
*
* coherent_user_range(start, end)
*
* Ensure coherency between the Icache and the Dcache in the
* region described by start, end. If you have non-snooping
* Harvard caches, you need to implement this function.
* - start - virtual start address
* - end - virtual end address
*
* flush_kern_dcache_area(kaddr, size)
*
* Ensure that the data held in page is written back.
* - kaddr - page address
* - size - region size
*
* DMA Cache Coherency
* ===================
*

View File

@ -11,6 +11,7 @@
#define __ASM_ARM_CPU_H
#include <linux/percpu.h>
#include <linux/cpu.h>
struct cpuinfo_arm {
struct cpu cpu;

View File

@ -138,12 +138,12 @@ extern int get_dma_residue(unsigned int chan);
#define NO_DMA 255
#endif
#endif /* CONFIG_ISA_DMA_API */
#ifdef CONFIG_PCI
extern int isa_dma_bridge_buggy;
#else
#define isa_dma_bridge_buggy (0)
#endif
#endif /* CONFIG_ISA_DMA_API */
#endif /* __ASM_ARM_DMA_H */

View File

@ -97,9 +97,15 @@
* stack during a system call. Note that sizeof(struct pt_regs)
* has to be a multiple of 8.
*/
#ifndef __KERNEL__
struct pt_regs {
long uregs[18];
};
#else /* __KERNEL__ */
struct pt_regs {
unsigned long uregs[18];
};
#endif /* __KERNEL__ */
#define ARM_cpsr uregs[16]
#define ARM_pc uregs[15]

View File

@ -391,6 +391,7 @@
#define __NR_pwritev (__NR_SYSCALL_BASE+362)
#define __NR_rt_tgsigqueueinfo (__NR_SYSCALL_BASE+363)
#define __NR_perf_event_open (__NR_SYSCALL_BASE+364)
#define __NR_recvmmsg (__NR_SYSCALL_BASE+365)
/*
* The following SWIs are ARM private.

View File

@ -49,6 +49,26 @@
1002:
.endm
#elif defined(CONFIG_CPU_V7)
.macro addruart, rx
.endm
.macro senduart, rd, rx
mcr p14, 0, \rd, c0, c5, 0
.endm
.macro busyuart, rd, rx
busy: mrc p14, 0, pc, c0, c1, 0
bcs busy
.endm
.macro waituart, rd, rx
wait: mrc p14, 0, pc, c0, c1, 0
bcs wait
.endm
#elif defined(CONFIG_CPU_XSCALE)
.macro addruart, rx

View File

@ -78,15 +78,6 @@ int arm_elf_read_implies_exec(const struct elf32_hdr *x, int executable_stack)
return 1;
if (cpu_architecture() < CPU_ARCH_ARMv6)
return 1;
#if !defined(CONFIG_AEABI) || defined(CONFIG_OABI_COMPAT)
/*
* If we have support for OABI programs, we can never allow NX
* support - our signal syscall restart mechanism relies upon
* being able to execute code placed on the user stack.
*/
return 1;
#else
return 0;
#endif
}
EXPORT_SYMBOL(arm_elf_read_implies_exec);

View File

@ -957,9 +957,7 @@ kuser_cmpxchg_fixup:
#else
#ifdef CONFIG_SMP
mcr p15, 0, r0, c7, c10, 5 @ dmb
#endif
smp_dmb
1: ldrex r3, [r2]
subs r3, r3, r0
strexeq r3, r1, [r2]

View File

@ -212,7 +212,8 @@ void __show_regs(struct pt_regs *regs)
char buf[64];
printk("CPU: %d %s (%s %.*s)\n",
smp_processor_id(), print_tainted(), init_utsname()->release,
raw_smp_processor_id(), print_tainted(),
init_utsname()->release,
(int)strcspn(init_utsname()->version, " "),
init_utsname()->version);
print_symbol("PC is at %s\n", instruction_pointer(regs));

View File

@ -102,6 +102,7 @@ struct cpu_cache_fns cpu_cache;
#endif
#ifdef CONFIG_OUTER_CACHE
struct outer_cache_fns outer_cache;
EXPORT_SYMBOL(outer_cache);
#endif
struct stack {

View File

@ -236,6 +236,7 @@ static struct vpfe_subdev_info vpfe_sub_devs[] = {
static struct vpfe_config vpfe_cfg = {
.num_subdevs = ARRAY_SIZE(vpfe_sub_devs),
.i2c_adapter_id = 1,
.sub_devs = vpfe_sub_devs,
.card_name = "DM355 EVM",
.ccdc = "DM355 CCDC",

View File

@ -192,7 +192,11 @@ static struct davinci_i2c_platform_data i2c_pdata = {
.bus_delay = 0 /* usec */,
};
#ifdef CONFIG_KEYBOARD_DAVINCI
static int dm365evm_keyscan_enable(struct device *dev)
{
return davinci_cfg_reg(DM365_KEYSCAN);
}
static unsigned short dm365evm_keymap[] = {
KEY_KP2,
KEY_LEFT,
@ -214,6 +218,7 @@ static unsigned short dm365evm_keymap[] = {
};
static struct davinci_ks_platform_data dm365evm_ks_data = {
.device_enable = dm365evm_keyscan_enable,
.keymap = dm365evm_keymap,
.keymapsize = ARRAY_SIZE(dm365evm_keymap),
.rep = 1,
@ -222,7 +227,6 @@ static struct davinci_ks_platform_data dm365evm_ks_data = {
.interval = 0x2,
.matrix_type = DAVINCI_KEYSCAN_MATRIX_4X4,
};
#endif
static int cpld_mmc_get_cd(int module)
{
@ -511,10 +515,7 @@ static __init void dm365_evm_init(void)
dm365_init_asp(&dm365_evm_snd_data);
dm365_init_rtc();
#ifdef CONFIG_KEYBOARD_DAVINCI
dm365_init_ks(&dm365evm_ks_data);
#endif
}
static __init void dm365_evm_irq_init(void)

View File

@ -247,6 +247,7 @@ static struct vpfe_subdev_info vpfe_sub_devs[] = {
static struct vpfe_config vpfe_cfg = {
.num_subdevs = ARRAY_SIZE(vpfe_sub_devs),
.i2c_adapter_id = 1,
.sub_devs = vpfe_sub_devs,
.card_name = "DM6446 EVM",
.ccdc = "DM6446 CCDC",

View File

@ -81,12 +81,23 @@ static int cp_intc_set_irq_type(unsigned int irq, unsigned int flow_type)
return 0;
}
/*
* Faking this allows us to to work with suspend functions of
* generic drivers which call {enable|disable}_irq_wake for
* wake up interrupt sources (eg RTC on DA850).
*/
static int cp_intc_set_wake(unsigned int irq, unsigned int on)
{
return 0;
}
static struct irq_chip cp_intc_irq_chip = {
.name = "cp_intc",
.ack = cp_intc_ack_irq,
.mask = cp_intc_mask_irq,
.unmask = cp_intc_unmask_irq,
.set_type = cp_intc_set_irq_type,
.set_wake = cp_intc_set_wake,
};
void __init cp_intc_init(void __iomem *base, unsigned short num_irq,

View File

@ -481,11 +481,18 @@ static struct platform_device da8xx_rtc_device = {
int da8xx_register_rtc(void)
{
int ret;
/* Unlock the rtc's registers */
__raw_writel(0x83e70b13, IO_ADDRESS(DA8XX_RTC_BASE + 0x6c));
__raw_writel(0x95a4f1e0, IO_ADDRESS(DA8XX_RTC_BASE + 0x70));
return platform_device_register(&da8xx_rtc_device);
ret = platform_device_register(&da8xx_rtc_device);
if (!ret)
/* Atleast on DA850, RTC is a wakeup source */
device_init_wakeup(&da8xx_rtc_device.dev, true);
return ret;
}
static struct resource da8xx_cpuidle_resources[] = {

View File

@ -993,7 +993,6 @@ void __init dm365_init_asp(struct snd_platform_data *pdata)
void __init dm365_init_ks(struct davinci_ks_platform_data *pdata)
{
davinci_cfg_reg(DM365_KEYSCAN);
dm365_ks_device.dev.platform_data = pdata;
platform_device_register(&dm365_ks_device);
}

View File

@ -29,6 +29,7 @@ enum davinci_matrix_types {
};
struct davinci_ks_platform_data {
int (*device_enable)(struct device *dev);
unsigned short *keymap;
u32 keymapsize;
u8 rep:1;

View File

@ -86,7 +86,7 @@ static int gpio_set_irq_type(unsigned int irq, unsigned int type)
unsigned int reg_both, reg_level, reg_type;
reg_type = __raw_readl(base + GPIO_INT_TYPE);
reg_level = __raw_readl(base + GPIO_INT_BOTH_EDGE);
reg_level = __raw_readl(base + GPIO_INT_LEVEL);
reg_both = __raw_readl(base + GPIO_INT_BOTH_EDGE);
switch (type) {
@ -117,7 +117,7 @@ static int gpio_set_irq_type(unsigned int irq, unsigned int type)
}
__raw_writel(reg_type, base + GPIO_INT_TYPE);
__raw_writel(reg_level, base + GPIO_INT_BOTH_EDGE);
__raw_writel(reg_level, base + GPIO_INT_LEVEL);
__raw_writel(reg_both, base + GPIO_INT_BOTH_EDGE);
gpio_ack_irq(irq);

View File

@ -30,7 +30,9 @@ static inline void putc(char c)
UART[UART_TX] = c;
}
#define flush() do { } while (0)
static inline void flush(void)
{
}
/*
* nothing to do

View File

@ -13,6 +13,7 @@
#include <linux/platform_device.h>
#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
#include <linux/gpio.h>
#include <linux/spi/flash.h>
#include <linux/spi/spi.h>
#include <linux/spi/orion_spi.h>
@ -53,6 +54,11 @@ static void __init rd88f6192_init(void)
*/
kirkwood_init();
orion_gpio_set_valid(RD88F6192_GPIO_USB_VBUS, 1);
if (gpio_request(RD88F6192_GPIO_USB_VBUS, "USB VBUS") != 0 ||
gpio_direction_output(RD88F6192_GPIO_USB_VBUS, 1) != 0)
pr_err("RD-88F6192-NAS: failed to setup USB VBUS GPIO\n");
kirkwood_ehci_init();
kirkwood_ge00_init(&rd88f6192_ge00_data);
kirkwood_sata_init(&rd88f6192_sata_data);

View File

@ -10,6 +10,8 @@
#include <mach/hardware.h>
#include <mach/clocks.h>
#include <linux/err.h>
#include <linux/device.h>
#include <linux/string.h>
struct module;

View File

@ -24,8 +24,6 @@
#include "common.h"
#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x)
static unsigned long ttc_dkb_pin_config[] __initdata = {
/* UART2 */
GPIO47_UART2_RXD,

View File

@ -58,21 +58,6 @@ static unsigned int mxt_td60_pins[] __initdata = {
PE9_PF_UART3_RXD,
PE10_PF_UART3_CTS,
PE11_PF_UART3_RTS,
/* UART3 */
PB26_AF_UART4_RTS,
PB28_AF_UART4_TXD,
PB29_AF_UART4_CTS,
PB31_AF_UART4_RXD,
/* UART4 */
PB18_AF_UART5_TXD,
PB19_AF_UART5_RXD,
PB20_AF_UART5_CTS,
PB21_AF_UART5_RTS,
/* UART5 */
PB10_AF_UART6_TXD,
PB12_AF_UART6_CTS,
PB11_AF_UART6_RXD,
PB13_AF_UART6_RTS,
/* FEC */
PD0_AIN_FEC_TXD0,
PD1_AIN_FEC_TXD1,
@ -261,12 +246,6 @@ static struct imxuart_platform_data uart_pdata[] = {
.flags = IMXUART_HAVE_RTSCTS,
}, {
.flags = IMXUART_HAVE_RTSCTS,
}, {
.flags = IMXUART_HAVE_RTSCTS,
}, {
.flags = IMXUART_HAVE_RTSCTS,
}, {
.flags = IMXUART_HAVE_RTSCTS,
},
};
@ -278,9 +257,6 @@ static void __init mxt_td60_board_init(void)
mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
mxc_register_device(&mxc_uart_device3, &uart_pdata[3]);
mxc_register_device(&mxc_uart_device4, &uart_pdata[4]);
mxc_register_device(&mxc_uart_device5, &uart_pdata[5]);
mxc_register_device(&mxc_nand_device, &mxt_td60_nand_board_info);
i2c_register_board_info(0, mxt_td60_i2c_devices,

View File

@ -119,6 +119,11 @@ static unsigned long get_rate_nfc(struct clk *clk)
return get_rate_per(8);
}
static unsigned long get_rate_gpt(struct clk *clk)
{
return get_rate_per(5);
}
static unsigned long get_rate_otg(struct clk *clk)
{
return 48000000; /* FIXME */
@ -144,7 +149,7 @@ static void clk_cgcr_disable(struct clk *clk)
__raw_writel(reg, clk->enable_reg);
}
#define DEFINE_CLOCK(name, i, er, es, gr, sr) \
#define DEFINE_CLOCK(name, i, er, es, gr, sr, s) \
static struct clk name = { \
.id = i, \
.enable_reg = CRM_BASE + er, \
@ -153,26 +158,30 @@ static void clk_cgcr_disable(struct clk *clk)
.set_rate = sr, \
.enable = clk_cgcr_enable, \
.disable = clk_cgcr_disable, \
.secondary = s, \
}
DEFINE_CLOCK(gpt_clk, 0, CCM_CGCR0, 5, get_rate_ipg, NULL);
DEFINE_CLOCK(cspi1_clk, 0, CCM_CGCR1, 5, get_rate_ipg, NULL);
DEFINE_CLOCK(cspi2_clk, 0, CCM_CGCR1, 6, get_rate_ipg, NULL);
DEFINE_CLOCK(cspi3_clk, 0, CCM_CGCR1, 7, get_rate_ipg, NULL);
DEFINE_CLOCK(uart1_clk, 0, CCM_CGCR2, 14, get_rate_uart, NULL);
DEFINE_CLOCK(uart2_clk, 0, CCM_CGCR2, 15, get_rate_uart, NULL);
DEFINE_CLOCK(uart3_clk, 0, CCM_CGCR2, 16, get_rate_uart, NULL);
DEFINE_CLOCK(uart4_clk, 0, CCM_CGCR2, 17, get_rate_uart, NULL);
DEFINE_CLOCK(uart5_clk, 0, CCM_CGCR2, 18, get_rate_uart, NULL);
DEFINE_CLOCK(nfc_clk, 0, CCM_CGCR0, 8, get_rate_nfc, NULL);
DEFINE_CLOCK(usbotg_clk, 0, CCM_CGCR0, 28, get_rate_otg, NULL);
DEFINE_CLOCK(pwm1_clk, 0, CCM_CGCR1, 31, get_rate_ipg, NULL);
DEFINE_CLOCK(pwm2_clk, 0, CCM_CGCR2, 0, get_rate_ipg, NULL);
DEFINE_CLOCK(pwm3_clk, 0, CCM_CGCR2, 1, get_rate_ipg, NULL);
DEFINE_CLOCK(pwm4_clk, 0, CCM_CGCR2, 2, get_rate_ipg, NULL);
DEFINE_CLOCK(kpp_clk, 0, CCM_CGCR1, 28, get_rate_ipg, NULL);
DEFINE_CLOCK(tsc_clk, 0, CCM_CGCR2, 13, get_rate_ipg, NULL);
DEFINE_CLOCK(i2c_clk, 0, CCM_CGCR0, 6, get_rate_i2c, NULL);
DEFINE_CLOCK(gpt_clk, 0, CCM_CGCR0, 5, get_rate_gpt, NULL, NULL);
DEFINE_CLOCK(uart_per_clk, 0, CCM_CGCR0, 15, get_rate_uart, NULL, NULL);
DEFINE_CLOCK(cspi1_clk, 0, CCM_CGCR1, 5, get_rate_ipg, NULL, NULL);
DEFINE_CLOCK(cspi2_clk, 0, CCM_CGCR1, 6, get_rate_ipg, NULL, NULL);
DEFINE_CLOCK(cspi3_clk, 0, CCM_CGCR1, 7, get_rate_ipg, NULL, NULL);
DEFINE_CLOCK(fec_ahb_clk, 0, CCM_CGCR0, 23, NULL, NULL, NULL);
DEFINE_CLOCK(uart1_clk, 0, CCM_CGCR2, 14, get_rate_uart, NULL, &uart_per_clk);
DEFINE_CLOCK(uart2_clk, 0, CCM_CGCR2, 15, get_rate_uart, NULL, &uart_per_clk);
DEFINE_CLOCK(uart3_clk, 0, CCM_CGCR2, 16, get_rate_uart, NULL, &uart_per_clk);
DEFINE_CLOCK(uart4_clk, 0, CCM_CGCR2, 17, get_rate_uart, NULL, &uart_per_clk);
DEFINE_CLOCK(uart5_clk, 0, CCM_CGCR2, 18, get_rate_uart, NULL, &uart_per_clk);
DEFINE_CLOCK(nfc_clk, 0, CCM_CGCR0, 8, get_rate_nfc, NULL, NULL);
DEFINE_CLOCK(usbotg_clk, 0, CCM_CGCR0, 28, get_rate_otg, NULL, NULL);
DEFINE_CLOCK(pwm1_clk, 0, CCM_CGCR1, 31, get_rate_ipg, NULL, NULL);
DEFINE_CLOCK(pwm2_clk, 0, CCM_CGCR2, 0, get_rate_ipg, NULL, NULL);
DEFINE_CLOCK(pwm3_clk, 0, CCM_CGCR2, 1, get_rate_ipg, NULL, NULL);
DEFINE_CLOCK(pwm4_clk, 0, CCM_CGCR2, 2, get_rate_ipg, NULL, NULL);
DEFINE_CLOCK(kpp_clk, 0, CCM_CGCR1, 28, get_rate_ipg, NULL, NULL);
DEFINE_CLOCK(tsc_clk, 0, CCM_CGCR2, 13, get_rate_ipg, NULL, NULL);
DEFINE_CLOCK(i2c_clk, 0, CCM_CGCR0, 6, get_rate_i2c, NULL, NULL);
DEFINE_CLOCK(fec_clk, 0, CCM_CGCR1, 15, get_rate_ipg, NULL, &fec_ahb_clk);
#define _REGISTER_CLOCK(d, n, c) \
{ \
@ -204,15 +213,24 @@ static struct clk_lookup lookups[] = {
_REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
_REGISTER_CLOCK("imx-i2c.1", NULL, i2c_clk)
_REGISTER_CLOCK("imx-i2c.2", NULL, i2c_clk)
_REGISTER_CLOCK("fec.0", NULL, fec_clk)
};
int __init mx25_clocks_init(unsigned long fref)
int __init mx25_clocks_init(void)
{
int i;
for (i = 0; i < ARRAY_SIZE(lookups); i++)
clkdev_add(&lookups[i]);
/* Turn off all clocks except the ones we need to survive, namely:
* EMI, GPIO1-3 (CCM_CGCR1[18:16]), GPT1, IOMUXC (CCM_CGCR1[27]), IIM,
* SCC
*/
__raw_writel((1 << 19), CRM_BASE + CCM_CGCR0);
__raw_writel((0xf << 16) | (3 << 26), CRM_BASE + CCM_CGCR1);
__raw_writel((1 << 5), CRM_BASE + CCM_CGCR2);
mxc_timer_init(&gpt_clk, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54);
return 0;

View File

@ -419,3 +419,22 @@ int __init mxc_register_gpios(void)
return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
}
static struct resource mx25_fec_resources[] = {
{
.start = MX25_FEC_BASE_ADDR,
.end = MX25_FEC_BASE_ADDR + 0xfff,
.flags = IORESOURCE_MEM,
},
{
.start = MX25_INT_FEC,
.end = MX25_INT_FEC,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device mx25_fec_device = {
.name = "fec",
.id = 0,
.num_resources = ARRAY_SIZE(mx25_fec_resources),
.resource = mx25_fec_resources,
};

View File

@ -17,3 +17,4 @@ extern struct platform_device mxc_keypad_device;
extern struct platform_device mxc_i2c_device0;
extern struct platform_device mxc_i2c_device1;
extern struct platform_device mxc_i2c_device2;
extern struct platform_device mx25_fec_device;

View File

@ -18,10 +18,11 @@
#include <linux/types.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/irq.h>
#include <linux/gpio.h>
#include <linux/smsc911x.h>
#include <linux/fec.h>
#include <linux/platform_device.h>
#include <mach/hardware.h>
@ -35,21 +36,62 @@
#include <mach/mx25.h>
#include <mach/mxc_nand.h>
#include "devices.h"
#include <mach/iomux-v3.h>
#include <mach/iomux.h>
static struct imxuart_platform_data uart_pdata = {
.flags = IMXUART_HAVE_RTSCTS,
};
static struct pad_desc mx25pdk_pads[] = {
MX25_PAD_FEC_MDC__FEC_MDC,
MX25_PAD_FEC_MDIO__FEC_MDIO,
MX25_PAD_FEC_TDATA0__FEC_TDATA0,
MX25_PAD_FEC_TDATA1__FEC_TDATA1,
MX25_PAD_FEC_TX_EN__FEC_TX_EN,
MX25_PAD_FEC_RDATA0__FEC_RDATA0,
MX25_PAD_FEC_RDATA1__FEC_RDATA1,
MX25_PAD_FEC_RX_DV__FEC_RX_DV,
MX25_PAD_FEC_TX_CLK__FEC_TX_CLK,
MX25_PAD_A17__GPIO_2_3, /* FEC_EN, GPIO 35 */
MX25_PAD_D12__GPIO_4_8, /* FEC_RESET_B, GPIO 104 */
};
static struct fec_platform_data mx25_fec_pdata = {
.phy = PHY_INTERFACE_MODE_RMII,
};
#define FEC_ENABLE_GPIO 35
#define FEC_RESET_B_GPIO 104
static void __init mx25pdk_fec_reset(void)
{
gpio_request(FEC_ENABLE_GPIO, "FEC PHY enable");
gpio_request(FEC_RESET_B_GPIO, "FEC PHY reset");
gpio_direction_output(FEC_ENABLE_GPIO, 0); /* drop PHY power */
gpio_direction_output(FEC_RESET_B_GPIO, 0); /* assert reset */
udelay(2);
/* turn on PHY power and lift reset */
gpio_set_value(FEC_ENABLE_GPIO, 1);
gpio_set_value(FEC_RESET_B_GPIO, 1);
}
static void __init mx25pdk_init(void)
{
mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads,
ARRAY_SIZE(mx25pdk_pads));
mxc_register_device(&mxc_uart_device0, &uart_pdata);
mxc_register_device(&mxc_usbh2, NULL);
mx25pdk_fec_reset();
mxc_register_device(&mx25_fec_device, &mx25_fec_pdata);
}
static void __init mx25pdk_timer_init(void)
{
mx25_clocks_init(26000000);
mx25_clocks_init();
}
static struct sys_timer mx25pdk_timer = {

View File

@ -49,6 +49,7 @@ config MACH_PCM037_EET
config MACH_MX31LITE
bool "Support MX31 LITEKIT (LogicPD)"
select ARCH_MX31
select MXC_ULPI if USB_ULPI
help
Include support for MX31 LITEKIT platform. This includes specific
configurations for the board and its peripherals.
@ -63,7 +64,7 @@ config MACH_MX31_3DS
config MACH_MX31MOBOARD
bool "Support mx31moboard platforms (EPFL Mobots group)"
select ARCH_MX31
select MXC_ULPI
select MXC_ULPI if USB_ULPI
help
Include support for mx31moboard platform. This includes specific
configurations for the board and its peripherals.

View File

@ -65,6 +65,11 @@ static struct map_desc mxc_io_desc[] __initdata = {
.pfn = __phys_to_pfn(AIPS2_BASE_ADDR),
.length = AIPS2_SIZE,
.type = MT_DEVICE_NONSHARED
}, {
.virtual = SPBA0_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(SPBA0_BASE_ADDR),
.length = SPBA0_SIZE,
.type = MT_DEVICE_NONSHARED
},
};

View File

@ -173,6 +173,7 @@ static void expio_unmask_irq(u32 irq)
}
static struct irq_chip expio_irq_chip = {
.name = "EXPIO(CPLD)",
.ack = expio_ack_irq,
.mask = expio_mask_irq,
.unmask = expio_unmask_irq,
@ -302,6 +303,7 @@ static struct regulator_init_data ldo1_data = {
.min_uV = 2800000,
.max_uV = 2800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.apply_uV = 1,
},
};
@ -322,6 +324,7 @@ static struct regulator_init_data ldo2_data = {
.min_uV = 3300000,
.max_uV = 3300000,
.valid_modes_mask = REGULATOR_MODE_NORMAL,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.apply_uV = 1,
},
.num_consumer_supplies = ARRAY_SIZE(ldo2_consumers),
@ -459,6 +462,7 @@ static int mx31_wm8350_init(struct wm8350 *wm8350)
static struct wm8350_platform_data __initdata mx31_wm8350_pdata = {
.init = mx31_wm8350_init,
.irq_base = MXC_BOARD_IRQ_START + MXC_MAX_EXP_IO_LINES,
};
#endif
@ -494,11 +498,6 @@ static void mxc_init_i2c(void)
*/
static struct map_desc mx31ads_io_desc[] __initdata = {
{
.virtual = SPBA0_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(SPBA0_BASE_ADDR),
.length = SPBA0_SIZE,
.type = MT_DEVICE_NONSHARED
}, {
.virtual = CS4_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(CS4_BASE_ADDR),
.length = CS4_SIZE / 2,

View File

@ -135,6 +135,7 @@ static struct spi_board_info mc13783_spi_dev __initdata = {
* USB
*/
#if defined(CONFIG_USB_ULPI)
#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
@ -180,6 +181,7 @@ static struct mxc_usbh_platform_data usbh2_pdata = {
.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
.flags = MXC_EHCI_POWER_PINS_ENABLED,
};
#endif
/*
* NOR flash
@ -212,11 +214,6 @@ static struct platform_device physmap_flash_device = {
*/
static struct map_desc mx31lite_io_desc[] __initdata = {
{
.virtual = SPBA0_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(SPBA0_BASE_ADDR),
.length = SPBA0_SIZE,
.type = MT_DEVICE_NONSHARED
}, {
.virtual = CS4_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(CS4_BASE_ADDR),
.length = CS4_SIZE,
@ -261,11 +258,13 @@ static void __init mxc_board_init(void)
mxc_register_device(&mxc_spi_device1, &spi1_pdata);
spi_register_board_info(&mc13783_spi_dev, 1);
#if defined(CONFIG_USB_ULPI)
/* USB */
usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
mxc_register_device(&mxc_usbh2, &usbh2_pdata);
#endif
/* SMSC9117 IRQ pin */
ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq");

View File

@ -179,7 +179,7 @@ static int __init devboard_usbh1_init(void)
usbh1_pdata.otg = otg;
return mxc_register_device(&mx31_usbh1, &usbh1_pdata);
return mxc_register_device(&mxc_usbh1, &usbh1_pdata);
}
/*

View File

@ -294,7 +294,7 @@ static int __init marxbot_usbh1_init(void)
usbh1_pdata.otg = otg;
return mxc_register_device(&mx31_usbh1, &usbh1_pdata);
return mxc_register_device(&mxc_usbh1, &usbh1_pdata);
}
/*

View File

@ -346,6 +346,8 @@ static struct fsl_usb2_platform_data usb_pdata = {
.phy_mode = FSL_USB2_PHY_ULPI,
};
#if defined(CONFIG_USB_ULPI)
#define USBH2_EN_B IOMUX_TO_GPIO(MX31_PIN_SCK6)
static int moboard_usbh2_hw_init(struct platform_device *pdev)
@ -392,8 +394,11 @@ static int __init moboard_usbh2_init(void)
usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
return mxc_register_device(&mx31_usbh2, &usbh2_pdata);
return mxc_register_device(&mxc_usbh2, &usbh2_pdata);
}
#else
static inline int moboard_usbh2_init(void) { return 0; }
#endif
static struct gpio_led mx31moboard_leds[] = {

View File

@ -211,11 +211,6 @@ static int __init mx31pdk_init_expio(void)
*/
static struct map_desc mx31pdk_io_desc[] __initdata = {
{
.virtual = SPBA0_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(SPBA0_BASE_ADDR),
.length = SPBA0_SIZE,
.type = MT_DEVICE_NONSHARED,
}, {
.virtual = CS5_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(CS5_BASE_ADDR),
.length = CS5_SIZE,

View File

@ -322,16 +322,25 @@ static int pcm037_camera_power(struct device *dev, int on)
return 0;
}
static struct i2c_board_info pcm037_i2c_2_devices[] = {
static struct i2c_board_info pcm037_i2c_camera[] = {
{
I2C_BOARD_INFO("mt9t031", 0x5d),
}, {
I2C_BOARD_INFO("mt9v022", 0x48),
},
};
static struct soc_camera_link iclink = {
static struct soc_camera_link iclink_mt9v022 = {
.bus_id = 0, /* Must match with the camera ID */
.board_info = &pcm037_i2c_camera[1],
.i2c_adapter_id = 2,
.module_name = "mt9v022",
};
static struct soc_camera_link iclink_mt9t031 = {
.bus_id = 0, /* Must match with the camera ID */
.power = pcm037_camera_power,
.board_info = &pcm037_i2c_2_devices[0],
.board_info = &pcm037_i2c_camera[0],
.i2c_adapter_id = 2,
.module_name = "mt9t031",
};
@ -345,11 +354,19 @@ static struct i2c_board_info pcm037_i2c_devices[] = {
}
};
static struct platform_device pcm037_camera = {
static struct platform_device pcm037_mt9t031 = {
.name = "soc-camera-pdrv",
.id = 0,
.dev = {
.platform_data = &iclink,
.platform_data = &iclink_mt9t031,
},
};
static struct platform_device pcm037_mt9v022 = {
.name = "soc-camera-pdrv",
.id = 1,
.dev = {
.platform_data = &iclink_mt9v022,
},
};
@ -449,7 +466,8 @@ static int __init pcm037_camera_alloc_dma(const size_t buf_size)
static struct platform_device *devices[] __initdata = {
&pcm037_flash,
&pcm037_sram_device,
&pcm037_camera,
&pcm037_mt9t031,
&pcm037_mt9v022,
};
static struct ipu_platform_data mx3_ipu_data = {
@ -599,7 +617,7 @@ static void __init mxc_board_init(void)
if (!ret)
gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), 1);
else
iclink.power = NULL;
iclink_mt9t031.power = NULL;
if (!pcm037_camera_alloc_dma(4 * 1024 * 1024))
mxc_register_device(&mx3_camera, &camera_pdata);

View File

@ -214,8 +214,8 @@ int omap1_select_table_rate(struct clk *clk, unsigned long rate)
struct mpu_rate * ptr;
unsigned long dpll1_rate, ref_rate;
dpll1_rate = clk_get_rate(ck_dpll1_p);
ref_rate = clk_get_rate(ck_ref_p);
dpll1_rate = ck_dpll1_p->rate;
ref_rate = ck_ref_p->rate;
for (ptr = omap1_rate_table; ptr->rate; ptr++) {
if (ptr->xtal != ref_rate)
@ -306,7 +306,7 @@ long omap1_round_to_table_rate(struct clk *clk, unsigned long rate)
long highest_rate;
unsigned long ref_rate;
ref_rate = clk_get_rate(ck_ref_p);
ref_rate = ck_ref_p->rate;
highest_rate = -EINVAL;

View File

@ -599,7 +599,7 @@ static struct clk i2c_ick = {
static struct omap_clk omap_clks[] = {
/* non-ULPD clocks */
CLK(NULL, "ck_ref", &ck_ref, CK_16XX | CK_1510 | CK_310 | CK_7XX),
CLK(NULL, "ck_dpll1", &ck_dpll1, CK_16XX | CK_1510 | CK_310),
CLK(NULL, "ck_dpll1", &ck_dpll1, CK_16XX | CK_1510 | CK_310 | CK_7XX),
/* CK_GEN1 clocks */
CLK(NULL, "ck_dpll1out", &ck_dpll1out.clk, CK_16XX),
CLK(NULL, "ck_sossi", &sossi_ck, CK_16XX),
@ -627,7 +627,7 @@ static struct omap_clk omap_clks[] = {
CLK(NULL, "tc2_ck", &tc2_ck, CK_16XX),
CLK(NULL, "dma_ck", &dma_ck, CK_16XX | CK_1510 | CK_310),
CLK(NULL, "dma_lcdfree_ck", &dma_lcdfree_ck, CK_16XX),
CLK(NULL, "api_ck", &api_ck.clk, CK_16XX | CK_1510 | CK_310),
CLK(NULL, "api_ck", &api_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX),
CLK(NULL, "lb_ck", &lb_ck.clk, CK_1510 | CK_310),
CLK(NULL, "rhea1_ck", &rhea1_ck, CK_16XX),
CLK(NULL, "rhea2_ck", &rhea2_ck, CK_16XX),
@ -658,6 +658,10 @@ static struct omap_clk omap_clks[] = {
CLK("i2c_omap.1", "fck", &i2c_fck, CK_16XX | CK_1510 | CK_310 | CK_7XX),
CLK("i2c_omap.1", "ick", &i2c_ick, CK_16XX),
CLK("i2c_omap.1", "ick", &dummy_ck, CK_1510 | CK_310 | CK_7XX),
CLK("omap1_spi100k.1", "fck", &dummy_ck, CK_7XX),
CLK("omap1_spi100k.1", "ick", &dummy_ck, CK_7XX),
CLK("omap1_spi100k.2", "fck", &dummy_ck, CK_7XX),
CLK("omap1_spi100k.2", "ick", &dummy_ck, CK_7XX),
CLK("omap_uwire", "fck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310),
CLK("omap-mcbsp.1", "ick", &dspper_ck, CK_16XX),
CLK("omap-mcbsp.1", "ick", &dummy_ck, CK_1510 | CK_310),
@ -674,7 +678,7 @@ static struct omap_clk omap_clks[] = {
* init
*/
static struct clk_functions omap1_clk_functions __initdata = {
static struct clk_functions omap1_clk_functions = {
.clk_enable = omap1_clk_enable,
.clk_disable = omap1_clk_disable,
.clk_round_rate = omap1_clk_round_rate,

View File

@ -14,6 +14,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/spi/spi.h>
#include <mach/hardware.h>
#include <asm/mach/map.h>
@ -23,6 +24,7 @@
#include <plat/mux.h>
#include <mach/gpio.h>
#include <plat/mmc.h>
#include <plat/omap7xx.h>
/*-------------------------------------------------------------------------*/
@ -196,6 +198,38 @@ void __init omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
/*-------------------------------------------------------------------------*/
/* OMAP7xx SPI support */
#if defined(CONFIG_SPI_OMAP_100K) || defined(CONFIG_SPI_OMAP_100K_MODULE)
struct platform_device omap_spi1 = {
.name = "omap1_spi100k",
.id = 1,
};
struct platform_device omap_spi2 = {
.name = "omap1_spi100k",
.id = 2,
};
static void omap_init_spi100k(void)
{
omap_spi1.dev.platform_data = ioremap(OMAP7XX_SPI1_BASE, 0x7ff);
if (omap_spi1.dev.platform_data)
platform_device_register(&omap_spi1);
omap_spi2.dev.platform_data = ioremap(OMAP7XX_SPI2_BASE, 0x7ff);
if (omap_spi2.dev.platform_data)
platform_device_register(&omap_spi2);
}
#else
static inline void omap_init_spi100k(void)
{
}
#endif
/*-------------------------------------------------------------------------*/
#if defined(CONFIG_OMAP_STI)
#define OMAP1_STI_BASE 0xfffea000
@ -263,6 +297,7 @@ static int __init omap1_init_devices(void)
omap_init_mbox();
omap_init_rtc();
omap_init_spi100k();
omap_init_sti();
return 0;

View File

@ -62,6 +62,14 @@ MUX_CFG_7XX("MMC_7XX_DAT0", 2, 17, 0, 16, 1, 0)
/* I2C interface */
MUX_CFG_7XX("I2C_7XX_SCL", 5, 1, 0, 0, 1, 0)
MUX_CFG_7XX("I2C_7XX_SDA", 5, 5, 0, 0, 1, 0)
/* SPI pins */
MUX_CFG_7XX("SPI_7XX_1", 6, 5, 4, 4, 1, 0)
MUX_CFG_7XX("SPI_7XX_2", 6, 9, 4, 8, 1, 0)
MUX_CFG_7XX("SPI_7XX_3", 6, 13, 4, 12, 1, 0)
MUX_CFG_7XX("SPI_7XX_4", 6, 17, 4, 16, 1, 0)
MUX_CFG_7XX("SPI_7XX_5", 8, 25, 0, 24, 0, 0)
MUX_CFG_7XX("SPI_7XX_6", 9, 5, 0, 4, 0, 0)
};
#define OMAP7XX_PINS_SZ ARRAY_SIZE(omap7xx_pins)
#else

View File

@ -80,6 +80,7 @@ config MACH_OVERO
config MACH_OMAP3EVM
bool "OMAP 3530 EVM board"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
select OMAP_PACKAGE_CBB
config MACH_OMAP3517EVM
bool "OMAP3517/ AM3517 EVM board"

View File

@ -63,21 +63,21 @@ static int board_keymap[] = {
KEY(5, 1, KEY_H),
KEY(5, 2, KEY_J),
KEY(5, 3, KEY_F3),
KEY(5, 4, KEY_UNKNOWN),
KEY(5, 5, KEY_VOLUMEDOWN),
KEY(5, 6, KEY_M),
KEY(5, 7, KEY_ENTER),
KEY(5, 7, KEY_RIGHT),
KEY(6, 0, KEY_Q),
KEY(6, 1, KEY_A),
KEY(6, 2, KEY_N),
KEY(6, 3, KEY_BACKSPACE),
KEY(6, 6, KEY_P),
KEY(6, 7, KEY_SELECT),
KEY(6, 7, KEY_UP),
KEY(7, 0, KEY_PROG1), /*MACRO 1 <User defined> */
KEY(7, 1, KEY_PROG2), /*MACRO 2 <User defined> */
KEY(7, 2, KEY_PROG3), /*MACRO 3 <User defined> */
KEY(7, 3, KEY_PROG4), /*MACRO 4 <User defined> */
KEY(7, 5, KEY_RIGHT),
KEY(7, 6, KEY_UP),
KEY(7, 6, KEY_SELECT),
KEY(7, 7, KEY_DOWN)
};

View File

@ -449,18 +449,56 @@ int omap2_select_table_rate(struct clk *clk, unsigned long rate)
#ifdef CONFIG_CPU_FREQ
/*
* Walk PRCM rate table and fillout cpufreq freq_table
* XXX This should be replaced by an OPP layer in the near future
*/
static struct cpufreq_frequency_table freq_table[ARRAY_SIZE(rate_table)];
static struct cpufreq_frequency_table *freq_table;
void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table)
{
struct prcm_config *prcm;
const struct prcm_config *prcm;
long sys_ck_rate;
int i = 0;
int tbl_sz = 0;
sys_ck_rate = clk_get_rate(sclk);
for (prcm = rate_table; prcm->mpu_speed; prcm++) {
if (!(prcm->flags & cpu_mask))
continue;
if (prcm->xtal_speed != sys_ck.rate)
if (prcm->xtal_speed != sys_ck_rate)
continue;
/* don't put bypass rates in table */
if (prcm->dpll_speed == prcm->xtal_speed)
continue;
tbl_sz++;
}
/*
* XXX Ensure that we're doing what CPUFreq expects for this error
* case and the following one
*/
if (tbl_sz == 0) {
pr_warning("%s: no matching entries in rate_table\n",
__func__);
return;
}
/* Include the CPUFREQ_TABLE_END terminator entry */
tbl_sz++;
freq_table = kzalloc(sizeof(struct cpufreq_frequency_table) * tbl_sz,
GFP_ATOMIC);
if (!freq_table) {
pr_err("%s: could not kzalloc frequency table\n", __func__);
return;
}
for (prcm = rate_table; prcm->mpu_speed; prcm++) {
if (!(prcm->flags & cpu_mask))
continue;
if (prcm->xtal_speed != sys_ck_rate)
continue;
/* don't put bypass rates in table */
@ -472,17 +510,17 @@ void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table)
i++;
}
if (i == 0) {
printk(KERN_WARNING "%s: failed to initialize frequency "
"table\n", __func__);
return;
}
freq_table[i].index = i;
freq_table[i].frequency = CPUFREQ_TABLE_END;
*table = &freq_table[0];
}
void omap2_clk_exit_cpufreq_table(struct cpufreq_frequency_table **table)
{
kfree(freq_table);
}
#endif
struct clk_functions omap2_clk_functions = {
@ -494,6 +532,7 @@ struct clk_functions omap2_clk_functions = {
.clk_disable_unused = omap2_clk_disable_unused,
#ifdef CONFIG_CPU_FREQ
.clk_init_cpufreq_table = omap2_clk_init_cpufreq_table,
.clk_exit_cpufreq_table = omap2_clk_exit_cpufreq_table,
#endif
};

View File

@ -34,7 +34,6 @@
#include <asm/div64.h>
#include <asm/clkdev.h>
#include <plat/sdrc.h>
#include "clock.h"
#include "clock34xx.h"
#include "sdrc.h"

View File

@ -671,7 +671,6 @@ static struct clk dpll4_m3x2_ck = {
.name = "dpll4_m3x2_ck",
.ops = &clkops_omap2_dflt_wait,
.parent = &dpll4_m3_ck,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
.enable_bit = OMAP3430_PWRDN_TV_SHIFT,
.flags = INVERT_ENABLE,
@ -776,6 +775,8 @@ static struct clk dpll4_m5_ck = {
.clksel_mask = OMAP3430_CLKSEL_CAM_MASK,
.clksel = div16_dpll4_clksel,
.clkdm_name = "dpll4_clkdm",
.set_rate = &omap2_clksel_set_rate,
.round_rate = &omap2_clksel_round_rate,
.recalc = &omap2_clksel_recalc,
};
@ -809,7 +810,6 @@ static struct clk dpll4_m6x2_ck = {
.name = "dpll4_m6x2_ck",
.ops = &clkops_omap2_dflt_wait,
.parent = &dpll4_m6_ck,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
.enable_bit = OMAP3430_PWRDN_EMU_PERIPH_SHIFT,
.flags = INVERT_ENABLE,
@ -1045,7 +1045,6 @@ static struct clk iva2_ck = {
.name = "iva2_ck",
.ops = &clkops_omap2_dflt_wait,
.parent = &dpll2_m2_ck,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT,
.clkdm_name = "iva2_clkdm",
@ -1119,7 +1118,6 @@ static struct clk gfx_l3_ck = {
.name = "gfx_l3_ck",
.ops = &clkops_omap2_dflt_wait,
.parent = &l3_ick,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN),
.enable_bit = OMAP_EN_GFX_SHIFT,
.recalc = &followparent_recalc,
@ -1500,6 +1498,7 @@ static struct clk uart2_fck = {
.parent = &core_48m_fck,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP3430_EN_UART2_SHIFT,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
@ -1509,6 +1508,7 @@ static struct clk uart1_fck = {
.parent = &core_48m_fck,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP3430_EN_UART1_SHIFT,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
@ -2745,7 +2745,7 @@ static struct clk mcbsp4_ick = {
};
static const struct clksel mcbsp_234_clksel[] = {
{ .parent = &core_96m_fck, .rates = common_mcbsp_96m_rates },
{ .parent = &per_96m_fck, .rates = common_mcbsp_96m_rates },
{ .parent = &mcbsp_clks, .rates = common_mcbsp_mcbsp_rates },
{ .parent = NULL }
};

View File

@ -346,37 +346,37 @@ static struct clk aess_fclk = {
};
static const struct clksel_rate div31_1to31_rates[] = {
{ .div = 1, .val = 0, .flags = RATE_IN_4430 },
{ .div = 2, .val = 1, .flags = RATE_IN_4430 },
{ .div = 3, .val = 2, .flags = RATE_IN_4430 },
{ .div = 4, .val = 3, .flags = RATE_IN_4430 },
{ .div = 5, .val = 4, .flags = RATE_IN_4430 },
{ .div = 6, .val = 5, .flags = RATE_IN_4430 },
{ .div = 7, .val = 6, .flags = RATE_IN_4430 },
{ .div = 8, .val = 7, .flags = RATE_IN_4430 },
{ .div = 9, .val = 8, .flags = RATE_IN_4430 },
{ .div = 10, .val = 9, .flags = RATE_IN_4430 },
{ .div = 11, .val = 10, .flags = RATE_IN_4430 },
{ .div = 12, .val = 11, .flags = RATE_IN_4430 },
{ .div = 13, .val = 12, .flags = RATE_IN_4430 },
{ .div = 14, .val = 13, .flags = RATE_IN_4430 },
{ .div = 15, .val = 14, .flags = RATE_IN_4430 },
{ .div = 16, .val = 15, .flags = RATE_IN_4430 },
{ .div = 17, .val = 16, .flags = RATE_IN_4430 },
{ .div = 18, .val = 17, .flags = RATE_IN_4430 },
{ .div = 19, .val = 18, .flags = RATE_IN_4430 },
{ .div = 20, .val = 19, .flags = RATE_IN_4430 },
{ .div = 21, .val = 20, .flags = RATE_IN_4430 },
{ .div = 22, .val = 21, .flags = RATE_IN_4430 },
{ .div = 23, .val = 22, .flags = RATE_IN_4430 },
{ .div = 24, .val = 23, .flags = RATE_IN_4430 },
{ .div = 25, .val = 24, .flags = RATE_IN_4430 },
{ .div = 26, .val = 25, .flags = RATE_IN_4430 },
{ .div = 27, .val = 26, .flags = RATE_IN_4430 },
{ .div = 28, .val = 27, .flags = RATE_IN_4430 },
{ .div = 29, .val = 28, .flags = RATE_IN_4430 },
{ .div = 30, .val = 29, .flags = RATE_IN_4430 },
{ .div = 31, .val = 30, .flags = RATE_IN_4430 },
{ .div = 1, .val = 1, .flags = RATE_IN_4430 },
{ .div = 2, .val = 2, .flags = RATE_IN_4430 },
{ .div = 3, .val = 3, .flags = RATE_IN_4430 },
{ .div = 4, .val = 4, .flags = RATE_IN_4430 },
{ .div = 5, .val = 5, .flags = RATE_IN_4430 },
{ .div = 6, .val = 6, .flags = RATE_IN_4430 },
{ .div = 7, .val = 7, .flags = RATE_IN_4430 },
{ .div = 8, .val = 8, .flags = RATE_IN_4430 },
{ .div = 9, .val = 9, .flags = RATE_IN_4430 },
{ .div = 10, .val = 10, .flags = RATE_IN_4430 },
{ .div = 11, .val = 11, .flags = RATE_IN_4430 },
{ .div = 12, .val = 12, .flags = RATE_IN_4430 },
{ .div = 13, .val = 13, .flags = RATE_IN_4430 },
{ .div = 14, .val = 14, .flags = RATE_IN_4430 },
{ .div = 15, .val = 15, .flags = RATE_IN_4430 },
{ .div = 16, .val = 16, .flags = RATE_IN_4430 },
{ .div = 17, .val = 17, .flags = RATE_IN_4430 },
{ .div = 18, .val = 18, .flags = RATE_IN_4430 },
{ .div = 19, .val = 19, .flags = RATE_IN_4430 },
{ .div = 20, .val = 20, .flags = RATE_IN_4430 },
{ .div = 21, .val = 21, .flags = RATE_IN_4430 },
{ .div = 22, .val = 22, .flags = RATE_IN_4430 },
{ .div = 23, .val = 23, .flags = RATE_IN_4430 },
{ .div = 24, .val = 24, .flags = RATE_IN_4430 },
{ .div = 25, .val = 25, .flags = RATE_IN_4430 },
{ .div = 26, .val = 26, .flags = RATE_IN_4430 },
{ .div = 27, .val = 27, .flags = RATE_IN_4430 },
{ .div = 28, .val = 28, .flags = RATE_IN_4430 },
{ .div = 29, .val = 29, .flags = RATE_IN_4430 },
{ .div = 30, .val = 30, .flags = RATE_IN_4430 },
{ .div = 31, .val = 31, .flags = RATE_IN_4430 },
{ .div = 0 },
};

View File

@ -559,7 +559,7 @@ int omap2_clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk)
* downstream clocks for debugging purposes?
*/
if (!clkdm || !clk)
if (!clkdm || !clk || !clkdm->clktrctrl_mask)
return -EINVAL;
if (atomic_inc_return(&clkdm->usecount) > 1)
@ -610,7 +610,7 @@ int omap2_clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk)
* downstream clocks for debugging purposes?
*/
if (!clkdm || !clk)
if (!clkdm || !clk || !clkdm->clktrctrl_mask)
return -EINVAL;
#ifdef DEBUG

View File

@ -137,7 +137,7 @@ return_sleep_time:
local_irq_enable();
local_fiq_enable();
return (u32)timespec_to_ns(&ts_idle)/1000;
return ts_idle.tv_nsec / NSEC_PER_USEC + ts_idle.tv_sec * USEC_PER_SEC;
}
/**

View File

@ -505,7 +505,7 @@ static void __init gpmc_mem_init(void)
void __init gpmc_init(void)
{
u32 l;
char *ck;
char *ck = NULL;
if (cpu_is_omap24xx()) {
ck = "core_l3_ck";
@ -521,6 +521,9 @@ void __init gpmc_init(void)
l = OMAP44XX_GPMC_BASE;
}
if (WARN_ON(!ck))
return;
gpmc_l3_clk = clk_get(NULL, ck);
if (IS_ERR(gpmc_l3_clk)) {
printk(KERN_ERR "Could not get GPMC clock %s\n", ck);
@ -534,6 +537,8 @@ void __init gpmc_init(void)
BUG();
}
clk_enable(gpmc_l3_clk);
l = gpmc_read_reg(GPMC_REVISION);
printk(KERN_INFO "GPMC revision %d.%d\n", (l >> 4) & 0x0f, l & 0x0f);
/* Set smart idle mode and automatic L3 clock gating */

View File

@ -188,6 +188,8 @@ void __init omap3_check_revision(void)
u16 hawkeye;
u8 rev;
omap_chip.oc = CHIP_IS_OMAP3430;
/*
* We cannot access revision registers on ES1.0.
* If the processor type is Cortex-A8 and the revision is 0x0
@ -196,6 +198,7 @@ void __init omap3_check_revision(void)
cpuid = read_cpuid(CPUID_ID);
if ((((cpuid >> 4) & 0xfff) == 0xc08) && ((cpuid & 0xf) == 0x0)) {
omap_revision = OMAP3430_REV_ES1_0;
omap_chip.oc |= CHIP_IS_OMAP3430ES1;
return;
}
@ -216,18 +219,28 @@ void __init omap3_check_revision(void)
case 0: /* Take care of early samples */
case 1:
omap_revision = OMAP3430_REV_ES2_0;
omap_chip.oc |= CHIP_IS_OMAP3430ES2;
break;
case 2:
omap_revision = OMAP3430_REV_ES2_1;
omap_chip.oc |= CHIP_IS_OMAP3430ES2;
break;
case 3:
omap_revision = OMAP3430_REV_ES3_0;
omap_chip.oc |= CHIP_IS_OMAP3430ES3_0;
break;
case 4:
omap_revision = OMAP3430_REV_ES3_1;
omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
break;
case 7:
/* FALLTHROUGH */
default:
/* Use the latest known revision as default */
omap_revision = OMAP3430_REV_ES3_1;
omap_revision = OMAP3430_REV_ES3_1_2;
/* REVISIT: Add CHIP_IS_OMAP3430ES3_1_2? */
omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
}
break;
case 0xb868:
@ -235,14 +248,18 @@ void __init omap3_check_revision(void)
*
* Set the device to be OMAP3505 here. Actual device
* is identified later based on the features.
*
* REVISIT: AM3505/AM3517 should have their own CHIP_IS
*/
omap_revision = OMAP3505_REV(rev);
omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
break;
case 0xb891:
/* FALLTHROUGH */
default:
/* Unknown default to latest silicon rev as default*/
omap_revision = OMAP3630_REV_ES1_0;
omap_chip.oc |= CHIP_IS_OMAP3630ES1;
}
}
@ -360,6 +377,7 @@ void __init omap2_check_revision(void)
omap3_check_revision();
omap3_check_features();
omap3_cpuinfo();
return;
} else if (cpu_is_omap44xx()) {
omap4_check_revision();
return;
@ -374,27 +392,14 @@ void __init omap2_check_revision(void)
if (cpu_is_omap243x()) {
/* Currently only supports 2430ES2.1 and 2430-all */
omap_chip.oc |= CHIP_IS_OMAP2430;
return;
} else if (cpu_is_omap242x()) {
/* Currently only supports 2420ES2.1.1 and 2420-all */
omap_chip.oc |= CHIP_IS_OMAP2420;
} else if (cpu_is_omap3505() || cpu_is_omap3517()) {
omap_chip.oc = CHIP_IS_OMAP3430 | CHIP_IS_OMAP3430ES3_1;
} else if (cpu_is_omap343x()) {
omap_chip.oc = CHIP_IS_OMAP3430;
if (omap_rev() == OMAP3430_REV_ES1_0)
omap_chip.oc |= CHIP_IS_OMAP3430ES1;
else if (omap_rev() >= OMAP3430_REV_ES2_0 &&
omap_rev() <= OMAP3430_REV_ES2_1)
omap_chip.oc |= CHIP_IS_OMAP3430ES2;
else if (omap_rev() == OMAP3430_REV_ES3_0)
omap_chip.oc |= CHIP_IS_OMAP3430ES3_0;
else if (omap_rev() == OMAP3430_REV_ES3_1)
omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
else if (omap_rev() == OMAP3630_REV_ES1_0)
omap_chip.oc |= CHIP_IS_OMAP3630ES1;
} else {
pr_err("Uninitialized omap_chip, please fix!\n");
return;
}
pr_err("Uninitialized omap_chip, please fix!\n");
}
/*

View File

@ -33,7 +33,6 @@
#include <plat/sdrc.h>
#include <plat/gpmc.h>
#include <plat/serial.h>
#include <plat/mux.h>
#include <plat/vram.h>
#include "clock.h"
@ -73,21 +72,21 @@ static struct map_desc omap24xx_io_desc[] __initdata = {
#ifdef CONFIG_ARCH_OMAP2420
static struct map_desc omap242x_io_desc[] __initdata = {
{
.virtual = DSP_MEM_24XX_VIRT,
.pfn = __phys_to_pfn(DSP_MEM_24XX_PHYS),
.length = DSP_MEM_24XX_SIZE,
.virtual = DSP_MEM_2420_VIRT,
.pfn = __phys_to_pfn(DSP_MEM_2420_PHYS),
.length = DSP_MEM_2420_SIZE,
.type = MT_DEVICE
},
{
.virtual = DSP_IPI_24XX_VIRT,
.pfn = __phys_to_pfn(DSP_IPI_24XX_PHYS),
.length = DSP_IPI_24XX_SIZE,
.virtual = DSP_IPI_2420_VIRT,
.pfn = __phys_to_pfn(DSP_IPI_2420_PHYS),
.length = DSP_IPI_2420_SIZE,
.type = MT_DEVICE
},
{
.virtual = DSP_MMU_24XX_VIRT,
.pfn = __phys_to_pfn(DSP_MMU_24XX_PHYS),
.length = DSP_MMU_24XX_SIZE,
.virtual = DSP_MMU_2420_VIRT,
.pfn = __phys_to_pfn(DSP_MMU_2420_PHYS),
.length = DSP_MMU_2420_SIZE,
.type = MT_DEVICE
},
};

View File

@ -194,7 +194,7 @@ void __init omap_init_irq(void)
int i;
for (i = 0; i < ARRAY_SIZE(irq_banks); i++) {
unsigned long base;
unsigned long base = 0;
struct omap_irq_bank *bank = irq_banks + i;
if (cpu_is_omap24xx())
@ -202,6 +202,8 @@ void __init omap_init_irq(void)
else if (cpu_is_omap34xx())
base = OMAP34XX_IC_BASE;
BUG_ON(!base);
/* Static mapping, never released */
bank->base_reg = ioremap(base, SZ_4K);
if (!bank->base_reg) {
@ -274,4 +276,22 @@ void omap_intc_restore_context(void)
}
/* MIRs are saved and restore with other PRCM registers */
}
void omap3_intc_suspend(void)
{
/* A pending interrupt would prevent OMAP from entering suspend */
omap_ack_irq(0);
}
void omap3_intc_prepare_idle(void)
{
/* Disable autoidle as it can stall interrupt controller */
intc_bank_write_reg(0, &irq_banks[0], INTC_SYSCONFIG);
}
void omap3_intc_resume_idle(void)
{
/* Re-enable autoidle */
intc_bank_write_reg(1, &irq_banks[0], INTC_SYSCONFIG);
}
#endif /* CONFIG_ARCH_OMAP3 */

View File

@ -408,6 +408,7 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
{
struct twl4030_hsmmc_info *c;
int nr_hsmmc = ARRAY_SIZE(hsmmc_data);
int i;
if (cpu_is_omap2430()) {
control_pbias_offset = OMAP243X_CONTROL_PBIAS_LITE;
@ -434,7 +435,7 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
mmc = kzalloc(sizeof(struct omap_mmc_platform_data), GFP_KERNEL);
if (!mmc) {
pr_err("Cannot allocate memory for mmc device!\n");
return;
goto done;
}
if (c->name)
@ -532,6 +533,10 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
continue;
c->dev = mmc->dev;
}
done:
for (i = 0; i < nr_hsmmc; i++)
kfree(hsmmc_data[i]);
}
#endif

View File

@ -51,7 +51,7 @@ struct omap_mux_entry {
static unsigned long mux_phys;
static void __iomem *mux_base;
static inline u16 omap_mux_read(u16 reg)
u16 omap_mux_read(u16 reg)
{
if (cpu_is_omap24xx())
return __raw_readb(mux_base + reg);
@ -59,7 +59,7 @@ static inline u16 omap_mux_read(u16 reg)
return __raw_readw(mux_base + reg);
}
static inline void omap_mux_write(u16 val, u16 reg)
void omap_mux_write(u16 val, u16 reg)
{
if (cpu_is_omap24xx())
__raw_writeb(val, mux_base + reg);
@ -67,6 +67,14 @@ static inline void omap_mux_write(u16 val, u16 reg)
__raw_writew(val, mux_base + reg);
}
void omap_mux_write_array(struct omap_board_mux *board_mux)
{
while (board_mux->reg_offset != OMAP_MUX_TERMINATOR) {
omap_mux_write(board_mux->value, board_mux->reg_offset);
board_mux++;
}
}
#if defined(CONFIG_ARCH_OMAP24XX) && defined(CONFIG_OMAP_MUX)
static struct omap_mux_cfg arch_mux_cfg;
@ -478,7 +486,7 @@ int __init omap_mux_init_signal(char *muxname, int val)
static inline void omap_mux_decode(struct seq_file *s, u16 val)
{
char *flags[OMAP_MUX_MAX_NR_FLAGS];
char mode[14];
char mode[sizeof("OMAP_MUX_MODE") + 1];
int i = -1;
sprintf(mode, "OMAP_MUX_MODE%d", val & 0x7);
@ -545,6 +553,7 @@ static int omap_mux_dbg_board_show(struct seq_file *s, void *unused)
if (!m0_name)
continue;
/* REVISIT: Needs to be updated if mode0 names get longer */
for (i = 0; i < OMAP_MUX_DEFNAME_LEN; i++) {
if (m0_name[i] == '\0') {
m0_def[i] = m0_name[i];
@ -833,14 +842,6 @@ static void __init omap_mux_set_cmdline_signals(void)
kfree(options);
}
static void __init omap_mux_set_board_signals(struct omap_board_mux *board_mux)
{
while (board_mux->reg_offset != OMAP_MUX_TERMINATOR) {
omap_mux_write(board_mux->value, board_mux->reg_offset);
board_mux++;
}
}
static int __init omap_mux_copy_names(struct omap_mux *src,
struct omap_mux *dst)
{
@ -960,7 +961,12 @@ static void __init omap_mux_init_list(struct omap_mux *superset)
while (superset->reg_offset != OMAP_MUX_TERMINATOR) {
struct omap_mux *entry;
#ifndef CONFIG_OMAP_MUX
#ifdef CONFIG_OMAP_MUX
if (!superset->muxnames || !superset->muxnames[0]) {
superset++;
continue;
}
#else
/* Skip pins that are not muxed as GPIO by bootloader */
if (!OMAP_MODE_GPIO(omap_mux_read(superset->reg_offset))) {
superset++;
@ -994,14 +1000,19 @@ int __init omap_mux_init(u32 mux_pbase, u32 mux_size,
}
#ifdef CONFIG_OMAP_MUX
omap_mux_package_fixup(package_subset, superset);
omap_mux_package_init_balls(package_balls, superset);
omap_mux_set_cmdline_signals();
omap_mux_set_board_signals(board_mux);
if (package_subset)
omap_mux_package_fixup(package_subset, superset);
if (package_balls)
omap_mux_package_init_balls(package_balls, superset);
#endif
omap_mux_init_list(superset);
#ifdef CONFIG_OMAP_MUX
omap_mux_set_cmdline_signals();
omap_mux_write_array(board_mux);
#endif
return 0;
}

View File

@ -146,6 +146,30 @@ u16 omap_mux_get_gpio(int gpio);
*/
void omap_mux_set_gpio(u16 val, int gpio);
/**
* omap_mux_read() - read mux register
* @mux_offset: Offset of the mux register
*
*/
u16 omap_mux_read(u16 mux_offset);
/**
* omap_mux_write() - write mux register
* @val: New mux register value
* @mux_offset: Offset of the mux register
*
* This should be only needed for dynamic remuxing of non-gpio signals.
*/
void omap_mux_write(u16 val, u16 mux_offset);
/**
* omap_mux_write_array() - write an array of mux registers
* @board_mux: Array of mux registers terminated by MAP_MUX_TERMINATOR
*
* This should be only needed for dynamic remuxing of non-gpio signals.
*/
void omap_mux_write_array(struct omap_board_mux *board_mux);
/**
* omap3_mux_init() - initialize mux system with board specific set
* @board_mux: Board specific mux table

View File

@ -649,6 +649,53 @@ static struct omap_mux __initdata omap3_muxmodes[] = {
_OMAP3_MUXENTRY(UART3_TX_IRTX, 166,
"uart3_tx_irtx", NULL, NULL, NULL,
"gpio_166", NULL, NULL, "safe_mode"),
/* Only on 3630, see omap36xx_cbp_subset for the signals */
_OMAP3_MUXENTRY(GPMC_A11, 0,
NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL),
_OMAP3_MUXENTRY(SAD2D_MBUSFLAG, 0,
NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL),
_OMAP3_MUXENTRY(SAD2D_MREAD, 0,
NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL),
_OMAP3_MUXENTRY(SAD2D_MWRITE, 0,
NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL),
_OMAP3_MUXENTRY(SAD2D_SBUSFLAG, 0,
NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL),
_OMAP3_MUXENTRY(SAD2D_SREAD, 0,
NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL),
_OMAP3_MUXENTRY(SAD2D_SWRITE, 0,
NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL),
_OMAP3_MUXENTRY(GPMC_A11, 0,
NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL),
_OMAP3_MUXENTRY(SAD2D_MCAD28, 0,
NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL),
_OMAP3_MUXENTRY(SAD2D_MCAD29, 0,
NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL),
_OMAP3_MUXENTRY(SAD2D_MCAD32, 0,
NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL),
_OMAP3_MUXENTRY(SAD2D_MCAD33, 0,
NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL),
_OMAP3_MUXENTRY(SAD2D_MCAD34, 0,
NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL),
_OMAP3_MUXENTRY(SAD2D_MCAD35, 0,
NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL),
_OMAP3_MUXENTRY(SAD2D_MCAD36, 0,
NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL),
{ .reg_offset = OMAP_MUX_TERMINATOR },
};

View File

@ -94,7 +94,8 @@ static int _update_sysc_cache(struct omap_hwmod *oh)
oh->_sysc_cache = omap_hwmod_readl(oh, oh->sysconfig->sysc_offs);
oh->_int_flags |= _HWMOD_SYSCONFIG_LOADED;
if (!(oh->sysconfig->sysc_flags & SYSC_NO_CACHE))
oh->_int_flags |= _HWMOD_SYSCONFIG_LOADED;
return 0;
}

View File

@ -9,45 +9,47 @@
* The OMAP2 processor can be run at several discrete 'PRCM configurations'.
* These configurations are characterized by voltage and speed for clocks.
* The device is only validated for certain combinations. One way to express
* these combinations is via the 'ratio's' which the clocks operate with
* these combinations is via the 'ratios' which the clocks operate with
* respect to each other. These ratio sets are for a given voltage/DPLL
* setting. All configurations can be described by a DPLL setting and a ratio
* There are 3 ratio sets for the 2430 and X ratio sets for 2420.
*
* 2430 differs from 2420 in that there are no more phase synchronizers used.
* They both have a slightly different clock domain setup. 2420(iva1,dsp) vs
* 2430 (iva2.1, NOdsp, mdm)
* setting. All configurations can be described by a DPLL setting and a ratio.
*
* XXX Missing voltage data.
* XXX Missing 19.2MHz sys_clk rate sets (needed for N800/N810)
*
* THe format described in this file is deprecated. Once a reasonable
* OPP API exists, the data in this file should be converted to use it.
*
* This is technically part of the OMAP2xxx clock code.
*
* Considerable work is still needed to fully support dynamic frequency
* changes on OMAP2xxx-series chips. Readers interested in such a
* project are encouraged to review the Maemo Diablo RX-34 and RX-44
* kernel source at:
* http://repository.maemo.org/pool/diablo/free/k/kernel-source-diablo/
*/
#include "opp2xxx.h"
#include "sdrc.h"
#include "clock.h"
/*-------------------------------------------------------------------------
* Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
/*
* Key dividers which make up a PRCM set. Ratios for a PRCM are mandated.
* xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,
* CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL,
* CM_CLKSEL2_PLL, CM_CLKSEL_MDM
*
* Filling in table based on H4 boards and 2430-SDPs variants available.
* There are quite a few more rates combinations which could be defined.
* Filling in table based on H4 boards available. There are quite a
* few more rate combinations which could be defined.
*
* When multiple values are defined the start up will try and choose the
* fastest one. If a 'fast' value is defined, then automatically, the /2
* one should be included as it can be used. Generally having more that
* one fast set does not make sense, as static timings need to be changed
* to change the set. The exception is the bypass setting which is
* availble for low power bypass.
* When multiple values are defined the start up will try and choose
* the fastest one. If a 'fast' value is defined, then automatically,
* the /2 one should be included as it can be used. Generally having
* more than one fast set does not make sense, as static timings need
* to be changed to change the set. The exception is the bypass
* setting which is available for low power bypass.
*
* Note: This table needs to be sorted, fastest to slowest.
*-------------------------------------------------------------------------*/
**/
const struct prcm_config omap2420_rate_table[] = {
/* PRCM I - FAST */
{S12M, S660M, S330M, RI_CM_CLKSEL_MPU_VAL, /* 330MHz ARM */

View File

@ -1,5 +1,5 @@
/*
* opp2420_data.c - old-style "OPP" table for OMAP2420
* opp2430_data.c - old-style "OPP" table for OMAP2430
*
* Copyright (C) 2005-2009 Texas Instruments, Inc.
* Copyright (C) 2004-2009 Nokia Corporation
@ -9,16 +9,16 @@
* The OMAP2 processor can be run at several discrete 'PRCM configurations'.
* These configurations are characterized by voltage and speed for clocks.
* The device is only validated for certain combinations. One way to express
* these combinations is via the 'ratio's' which the clocks operate with
* these combinations is via the 'ratios' which the clocks operate with
* respect to each other. These ratio sets are for a given voltage/DPLL
* setting. All configurations can be described by a DPLL setting and a ratio
* There are 3 ratio sets for the 2430 and X ratio sets for 2420.
* setting. All configurations can be described by a DPLL setting and a ratio.
*
* 2430 differs from 2420 in that there are no more phase synchronizers used.
* They both have a slightly different clock domain setup. 2420(iva1,dsp) vs
* 2430 (iva2.1, NOdsp, mdm)
*
* XXX Missing voltage data.
* XXX Missing 19.2MHz sys_clk rate sets.
*
* THe format described in this file is deprecated. Once a reasonable
* OPP API exists, the data in this file should be converted to use it.
@ -30,24 +30,24 @@
#include "sdrc.h"
#include "clock.h"
/*-------------------------------------------------------------------------
* Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
/*
* Key dividers which make up a PRCM set. Ratios for a PRCM are mandated.
* xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,
* CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL,
* CM_CLKSEL2_PLL, CM_CLKSEL_MDM
*
* Filling in table based on H4 boards and 2430-SDPs variants available.
* There are quite a few more rates combinations which could be defined.
* Filling in table based on 2430-SDPs variants available. There are
* quite a few more rate combinations which could be defined.
*
* When multiple values are defined the start up will try and choose the
* fastest one. If a 'fast' value is defined, then automatically, the /2
* one should be included as it can be used. Generally having more that
* one fast set does not make sense, as static timings need to be changed
* to change the set. The exception is the bypass setting which is
* availble for low power bypass.
* When multiple values are defined the start up will try and choose
* the fastest one. If a 'fast' value is defined, then automatically,
* the /2 one should be included as it can be used. Generally having
* more than one fast set does not make sense, as static timings need
* to be changed to change the set. The exception is the bypass
* setting which is available for low power bypass.
*
* Note: This table needs to be sorted, fastest to slowest.
*-------------------------------------------------------------------------*/
*/
const struct prcm_config omap2430_rate_table[] = {
/* PRCM #4 - ratio2 (ES2.1) - FAST */
{S13M, S798M, S399M, R2_CM_CLKSEL_MPU_VAL, /* 399MHz ARM */

View File

@ -54,8 +54,6 @@ int omap2_pm_debug;
regs[reg_count++].val = \
__raw_readl(OMAP2_L4_IO_ADDRESS(0x480fe000 + (off)))
static int __init pm_dbg_init(void);
void omap2_pm_dump(int mode, int resume, unsigned int us)
{
struct reg {
@ -167,6 +165,8 @@ struct dentry *pm_dbg_dir;
static int pm_dbg_init_done;
static int __init pm_dbg_init(void);
enum {
DEBUG_FILE_COUNTERS = 0,
DEBUG_FILE_TIMERS,
@ -488,9 +488,11 @@ int pm_dbg_regset_init(int reg_set)
static int pwrdm_suspend_get(void *data, u64 *val)
{
*val = omap3_pm_get_suspend_state((struct powerdomain *)data);
int ret;
ret = omap3_pm_get_suspend_state((struct powerdomain *)data);
*val = ret;
if (*val >= 0)
if (ret >= 0)
return 0;
return *val;
}
@ -604,6 +606,4 @@ static int __init pm_dbg_init(void)
}
arch_initcall(pm_dbg_init);
#else
void pm_dbg_update_time(struct powerdomain *pwrdm, int prev) {}
#endif

View File

@ -32,12 +32,16 @@ extern struct omap_dm_timer *gptimer_wakeup;
#ifdef CONFIG_PM_DEBUG
extern void omap2_pm_dump(int mode, int resume, unsigned int us);
extern int omap2_pm_debug;
#else
#define omap2_pm_dump(mode, resume, us) do {} while (0);
#define omap2_pm_debug 0
#endif
#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
extern void pm_dbg_update_time(struct powerdomain *pwrdm, int prev);
extern int pm_dbg_regset_save(int reg_set);
extern int pm_dbg_regset_init(int reg_set);
#else
#define omap2_pm_dump(mode, resume, us) do {} while (0);
#define omap2_pm_debug 0
#define pm_dbg_update_time(pwrdm, prev) do {} while (0);
#define pm_dbg_regset_save(reg_set) do {} while (0);
#define pm_dbg_regset_init(reg_set) do {} while (0);

View File

@ -26,6 +26,7 @@
#include <linux/err.h>
#include <linux/gpio.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <plat/sram.h>
#include <plat/clockdomain.h>
@ -124,9 +125,17 @@ static void omap3_core_save_context(void)
control_padconf_off |= START_PADCONF_SAVE;
omap_ctrl_writel(control_padconf_off, OMAP343X_CONTROL_PADCONF_OFF);
/* wait for the save to complete */
while (!omap_ctrl_readl(OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS)
& PADCONF_SAVE_DONE)
;
while (!(omap_ctrl_readl(OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS)
& PADCONF_SAVE_DONE))
udelay(1);
/*
* Force write last pad into memory, as this can fail in some
* cases according to erratas 1.157, 1.185
*/
omap_ctrl_writel(omap_ctrl_readl(OMAP343X_PADCONF_ETK_D14),
OMAP343X_CONTROL_MEM_WKUP + 0x2a0);
/* Save the Interrupt controller context */
omap_intc_save_context();
/* Save the GPMC context */
@ -392,6 +401,7 @@ void omap_sram_idle(void)
prm_set_mod_reg_bits(OMAP3430_EN_IO, WKUP_MOD, PM_WKEN);
omap3_enable_io_chain();
}
omap3_intc_prepare_idle();
/*
* On EMU/HS devices ROM code restores a SRDC value
@ -438,6 +448,7 @@ void omap_sram_idle(void)
OMAP3430_GR_MOD,
OMAP3_PRM_VOLTCTRL_OFFSET);
}
omap3_intc_resume_idle();
/* PER */
if (per_next_state < PWRDM_POWER_ON) {
@ -578,6 +589,8 @@ static int omap3_pm_suspend(void)
}
omap_uart_prepare_suspend();
omap3_intc_suspend();
omap_sram_idle();
restore:
@ -835,6 +848,8 @@ static void __init prcm_setup_regs(void)
CM_AUTOIDLE);
}
omap_ctrl_writel(OMAP3430_AUTOIDLE, OMAP2_CONTROL_SYSCONFIG);
/*
* Set all plls to autoidle. This is needed until autoidle is
* enabled by clockfw
@ -875,15 +890,23 @@ static void __init prcm_setup_regs(void)
prm_write_mod_reg(OMAP3430_IO_EN | OMAP3430_WKUP_EN,
OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
/* Enable PM_WKEN to support DSS LPR */
prm_write_mod_reg(OMAP3430_PM_WKEN_DSS_EN_DSS,
OMAP3430_DSS_MOD, PM_WKEN);
/* Enable wakeups in PER */
prm_write_mod_reg(OMAP3430_EN_GPIO2 | OMAP3430_EN_GPIO3 |
OMAP3430_EN_GPIO4 | OMAP3430_EN_GPIO5 |
OMAP3430_EN_GPIO6 | OMAP3430_EN_UART3,
OMAP3430_EN_GPIO6 | OMAP3430_EN_UART3 |
OMAP3430_EN_MCBSP2 | OMAP3430_EN_MCBSP3 |
OMAP3430_EN_MCBSP4,
OMAP3430_PER_MOD, PM_WKEN);
/* and allow them to wake up MPU */
prm_write_mod_reg(OMAP3430_GRPSEL_GPIO2 | OMAP3430_EN_GPIO3 |
OMAP3430_GRPSEL_GPIO4 | OMAP3430_EN_GPIO5 |
OMAP3430_GRPSEL_GPIO6 | OMAP3430_EN_UART3,
OMAP3430_GRPSEL_GPIO6 | OMAP3430_EN_UART3 |
OMAP3430_EN_MCBSP2 | OMAP3430_EN_MCBSP3 |
OMAP3430_EN_MCBSP4,
OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL);
/* Don't attach IVA interrupts */
@ -904,24 +927,6 @@ static void __init prcm_setup_regs(void)
/* Clear any pending PRCM interrupts */
prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
/* Don't attach IVA interrupts */
prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL);
prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1);
prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3);
prm_write_mod_reg(0, OMAP3430_PER_MOD, OMAP3430_PM_IVAGRPSEL);
/* Clear any pending 'reset' flags */
prm_write_mod_reg(0xffffffff, MPU_MOD, RM_RSTST);
prm_write_mod_reg(0xffffffff, CORE_MOD, RM_RSTST);
prm_write_mod_reg(0xffffffff, OMAP3430_PER_MOD, RM_RSTST);
prm_write_mod_reg(0xffffffff, OMAP3430_EMU_MOD, RM_RSTST);
prm_write_mod_reg(0xffffffff, OMAP3430_NEON_MOD, RM_RSTST);
prm_write_mod_reg(0xffffffff, OMAP3430_DSS_MOD, RM_RSTST);
prm_write_mod_reg(0xffffffff, OMAP3430ES2_USBHOST_MOD, RM_RSTST);
/* Clear any pending PRCM interrupts */
prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
omap3_iva_idle();
omap3_d2d_idle();
}

View File

@ -44,7 +44,6 @@ struct omap3_prcm_regs {
u32 iva2_cm_clksel2;
u32 cm_sysconfig;
u32 sgx_cm_clksel;
u32 wkup_cm_clksel;
u32 dss_cm_clksel;
u32 cam_cm_clksel;
u32 per_cm_clksel;
@ -53,7 +52,6 @@ struct omap3_prcm_regs {
u32 pll_cm_autoidle2;
u32 pll_cm_clksel4;
u32 pll_cm_clksel5;
u32 pll_cm_clken;
u32 pll_cm_clken2;
u32 cm_polctrl;
u32 iva2_cm_fclken;
@ -77,7 +75,6 @@ struct omap3_prcm_regs {
u32 usbhost_cm_iclken;
u32 iva2_cm_autiidle2;
u32 mpu_cm_autoidle2;
u32 pll_cm_autoidle;
u32 iva2_cm_clkstctrl;
u32 mpu_cm_clkstctrl;
u32 core_cm_clkstctrl;
@ -274,7 +271,6 @@ void omap3_prcm_save_context(void)
prcm_context.cm_sysconfig = __raw_readl(OMAP3430_CM_SYSCONFIG);
prcm_context.sgx_cm_clksel =
cm_read_mod_reg(OMAP3430ES2_SGX_MOD, CM_CLKSEL);
prcm_context.wkup_cm_clksel = cm_read_mod_reg(WKUP_MOD, CM_CLKSEL);
prcm_context.dss_cm_clksel =
cm_read_mod_reg(OMAP3430_DSS_MOD, CM_CLKSEL);
prcm_context.cam_cm_clksel =
@ -291,8 +287,6 @@ void omap3_prcm_save_context(void)
cm_read_mod_reg(PLL_MOD, OMAP3430ES2_CM_CLKSEL4);
prcm_context.pll_cm_clksel5 =
cm_read_mod_reg(PLL_MOD, OMAP3430ES2_CM_CLKSEL5);
prcm_context.pll_cm_clken =
cm_read_mod_reg(PLL_MOD, CM_CLKEN);
prcm_context.pll_cm_clken2 =
cm_read_mod_reg(PLL_MOD, OMAP3430ES2_CM_CLKEN2);
prcm_context.cm_polctrl = __raw_readl(OMAP3430_CM_POLCTRL);
@ -338,8 +332,6 @@ void omap3_prcm_save_context(void)
cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_AUTOIDLE2);
prcm_context.mpu_cm_autoidle2 =
cm_read_mod_reg(MPU_MOD, CM_AUTOIDLE2);
prcm_context.pll_cm_autoidle =
cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE);
prcm_context.iva2_cm_clkstctrl =
cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_CLKSTCTRL);
prcm_context.mpu_cm_clkstctrl =
@ -431,7 +423,6 @@ void omap3_prcm_restore_context(void)
__raw_writel(prcm_context.cm_sysconfig, OMAP3430_CM_SYSCONFIG);
cm_write_mod_reg(prcm_context.sgx_cm_clksel, OMAP3430ES2_SGX_MOD,
CM_CLKSEL);
cm_write_mod_reg(prcm_context.wkup_cm_clksel, WKUP_MOD, CM_CLKSEL);
cm_write_mod_reg(prcm_context.dss_cm_clksel, OMAP3430_DSS_MOD,
CM_CLKSEL);
cm_write_mod_reg(prcm_context.cam_cm_clksel, OMAP3430_CAM_MOD,
@ -448,7 +439,6 @@ void omap3_prcm_restore_context(void)
OMAP3430ES2_CM_CLKSEL4);
cm_write_mod_reg(prcm_context.pll_cm_clksel5, PLL_MOD,
OMAP3430ES2_CM_CLKSEL5);
cm_write_mod_reg(prcm_context.pll_cm_clken, PLL_MOD, CM_CLKEN);
cm_write_mod_reg(prcm_context.pll_cm_clken2, PLL_MOD,
OMAP3430ES2_CM_CLKEN2);
__raw_writel(prcm_context.cm_polctrl, OMAP3430_CM_POLCTRL);
@ -487,7 +477,6 @@ void omap3_prcm_restore_context(void)
cm_write_mod_reg(prcm_context.iva2_cm_autiidle2, OMAP3430_IVA2_MOD,
CM_AUTOIDLE2);
cm_write_mod_reg(prcm_context.mpu_cm_autoidle2, MPU_MOD, CM_AUTOIDLE2);
cm_write_mod_reg(prcm_context.pll_cm_autoidle, PLL_MOD, CM_AUTOIDLE);
cm_write_mod_reg(prcm_context.iva2_cm_clkstctrl, OMAP3430_IVA2_MOD,
CM_CLKSTCTRL);
cm_write_mod_reg(prcm_context.mpu_cm_clkstctrl, MPU_MOD, CM_CLKSTCTRL);

View File

@ -24,6 +24,8 @@
OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg))
#define OMAP44XX_PRM_REGADDR(module, reg) \
OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE + (module) + (reg))
#define OMAP44XX_CHIRONSS_REGADDR(module, reg) \
OMAP2_L4_IO_ADDRESS(OMAP4430_CHIRONSS_BASE + (module) + (reg))
#include "prm44xx.h"

View File

@ -386,26 +386,26 @@
/* CHIRON_PRCM.CHIRONSS_OCP_SOCKET_PRCM register offsets */
#define OMAP4430_REVISION_PRCM OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_OCP_SOCKET_PRCM_MOD, 0x0000)
#define OMAP4430_REVISION_PRCM OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_OCP_SOCKET_PRCM_MOD, 0x0000)
/* CHIRON_PRCM.CHIRONSS_DEVICE_PRM register offsets */
#define OMAP4430_CHIRON_PRCM_PRM_RSTST OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_DEVICE_PRM_MOD, 0x0000)
#define OMAP4430_CHIRON_PRCM_PRM_RSTST OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_DEVICE_PRM_MOD, 0x0000)
/* CHIRON_PRCM.CHIRONSS_CPU0 register offsets */
#define OMAP4430_PM_PDA_CPU0_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0000)
#define OMAP4430_PM_PDA_CPU0_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0004)
#define OMAP4430_RM_PDA_CPU0_CPU0_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0008)
#define OMAP4430_RM_PDA_CPU0_CPU0_RSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x000c)
#define OMAP4430_RM_PDA_CPU0_CPU0_RSTST OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0010)
#define OMAP4430_CM_PDA_CPU0_CPU0_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0014)
#define OMAP4430_CM_PDA_CPU0_CLKSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0018)
#define OMAP4430_PM_PDA_CPU0_PWRSTCTRL OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0000)
#define OMAP4430_PM_PDA_CPU0_PWRSTST OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0004)
#define OMAP4430_RM_PDA_CPU0_CPU0_CONTEXT OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0008)
#define OMAP4430_RM_PDA_CPU0_CPU0_RSTCTRL OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x000c)
#define OMAP4430_RM_PDA_CPU0_CPU0_RSTST OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0010)
#define OMAP4430_CM_PDA_CPU0_CPU0_CLKCTRL OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0014)
#define OMAP4430_CM_PDA_CPU0_CLKSTCTRL OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0018)
/* CHIRON_PRCM.CHIRONSS_CPU1 register offsets */
#define OMAP4430_PM_PDA_CPU1_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0000)
#define OMAP4430_PM_PDA_CPU1_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0004)
#define OMAP4430_RM_PDA_CPU1_CPU1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0008)
#define OMAP4430_RM_PDA_CPU1_CPU1_RSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x000c)
#define OMAP4430_RM_PDA_CPU1_CPU1_RSTST OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0010)
#define OMAP4430_CM_PDA_CPU1_CPU1_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0014)
#define OMAP4430_CM_PDA_CPU1_CLKSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0018)
#define OMAP4430_PM_PDA_CPU1_PWRSTCTRL OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0000)
#define OMAP4430_PM_PDA_CPU1_PWRSTST OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0004)
#define OMAP4430_RM_PDA_CPU1_CPU1_CONTEXT OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0008)
#define OMAP4430_RM_PDA_CPU1_CPU1_RSTCTRL OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x000c)
#define OMAP4430_RM_PDA_CPU1_CPU1_RSTST OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0010)
#define OMAP4430_CM_PDA_CPU1_CPU1_CLKCTRL OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0014)
#define OMAP4430_CM_PDA_CPU1_CLKSTCTRL OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0018)
#endif

View File

@ -36,7 +36,13 @@
#define UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV 0x52
#define UART_OMAP_WER 0x17 /* Wake-up enable register */
#define DEFAULT_TIMEOUT (5 * HZ)
/*
* NOTE: By default the serial timeout is disabled as it causes lost characters
* over the serial ports. This means that the UART clocks will stay on until
* disabled via sysfs. This also causes that any deeper omap sleep states are
* blocked.
*/
#define DEFAULT_TIMEOUT 0
struct omap_uart_state {
int num;
@ -125,6 +131,13 @@ static struct plat_serial8250_port serial_platform_data3[] = {
}
};
#endif
static inline unsigned int __serial_read_reg(struct uart_port *up,
int offset)
{
offset <<= up->regshift;
return (unsigned int)__raw_readb(up->membase + offset);
}
static inline unsigned int serial_read_reg(struct plat_serial8250_port *up,
int offset)
{
@ -415,7 +428,8 @@ static void omap_uart_idle_init(struct omap_uart_state *uart)
uart->timeout = DEFAULT_TIMEOUT;
setup_timer(&uart->timer, omap_uart_idle_timer,
(unsigned long) uart);
mod_timer(&uart->timer, jiffies + uart->timeout);
if (uart->timeout)
mod_timer(&uart->timer, jiffies + uart->timeout);
omap_uart_smart_idle_enable(uart, 0);
if (cpu_is_omap34xx()) {
@ -583,11 +597,12 @@ static unsigned int serial_in_override(struct uart_port *up, int offset)
{
if (UART_RX == offset) {
unsigned int lsr;
lsr = serial_read_reg(omap_uart[up->line].p, UART_LSR);
lsr = __serial_read_reg(up, UART_LSR);
if (!(lsr & UART_LSR_DR))
return -EPERM;
}
return serial_read_reg(omap_uart[up->line].p, offset);
return __serial_read_reg(up, offset);
}
void __init omap_serial_early_init(void)

Some files were not shown because too many files have changed in this diff Show More