ARM: SoC fixes for 5.15, part 2

A small number fixes this time, mostly touching actual code:
 
  - Add platform device for i.MX System Reset Controller (SRC) to fix
    a regression caused by fw_devlink change.
 
  - A fixup for a boot regression caused by my own rework for the
    Qualcomm SCM driver.
 
  - Multiple bugfixes for the Arm FFA and optee firmware drivers,
    addressing problems when they are built as a loadable module.
 
  - Four dts bugfixes for the Broadcom SoC used in Raspberry pi, addressing
    VEC (video encoder), MDIO bus controller #address-cells/#size-cells,
    SDIO voltage and PCIe host bridge dtc warnings.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmFp5goACgkQmmx57+YA
 GNkMiw/+JKDklazok+5dVmS22Or8q7rTXhWDO3ZrsjkjrsRB3J61Z8F0dhI9nxew
 9qwScV2yFKdC6fMsUz7YOlcstzHUhmCwdazHMEXQy3lSynppZNCyYBaoTeWjw9Be
 QtHzPHfJ+RZsnQk7xWugH+9DIZPy5D2y5gecbcj7Qm2pAjBZgMNn93ppIebIbWWa
 UrPBns8tWjNoCMkXyEiWK8y9b8nW27AF9QKm2HGvyH/MIxo2xTGScNhY9OH7RxGk
 9ZTnRWayHSxwsqCDglr5CY0LAhCKxwIvAYTy/AgeeLXOgLwUgfAeEDVaDLDpJEHf
 I9TfYCM5T0tVMtn2sW7uVIfWdTm8DV+YttSwIPMA0l8SL4beWqvWt8z7qGiigarl
 xKOKps/pex4u+lUQtNoAtveXrw2JlUXFfF8r0TygwtXqAKuzd0mwHwjPG4uprcyU
 4kKq39tTthdtcOKRpmEEIvrg7nMVO+4Km56r2oDL9iXTXYP5tIgl+DoXgrqvu7ML
 6CCc0zy1invDjoQmhCsPikFRweRGJXJS2yqLXngSBb8SdvW7nMflQPEhHO0AWwXB
 I8tRK+SjXP+N2IZNpnKd+s6BZTSa5boOaCs8wJHidk356VUajj90ckc1O9i5XOmz
 CSEW1sYnwUc5EnMjvtgQXVTexF2w6XA49mzl4a+ewMxeF3WEtEE=
 =87lq
 -----END PGP SIGNATURE-----

Merge tag 'arm-soc-fixes-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
 "A small number fixes this time, mostly touching actual code:

   - Add platform device for i.MX System Reset Controller (SRC) to
     fix a regression caused by fw_devlink change

   - A fixup for a boot regression caused by my own rework for the
     Qualcomm SCM driver

   - Multiple bugfixes for the Arm FFA and optee firmware drivers,
     addressing problems when they are built as a loadable module

   - Four dts bugfixes for the Broadcom SoC used in Raspberry pi,
     addressing VEC (video encoder), MDIO bus controller
     #address-cells/#size-cells, SDIO voltage and PCIe host bridge
     dtc warnings"

* tag 'arm-soc-fixes-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: imx: register reset controller from a platform driver
  iommu/arm: fix ARM_SMMU_QCOM compilation
  ARM: dts: bcm2711-rpi-4-b: Fix usb's unit address
  ARM: dts: bcm2711-rpi-4-b: Fix pcie0's unit address formatting
  tee: optee: Fix missing devices unregister during optee_remove
  ARM: dts: bcm2711-rpi-4-b: fix sd_io_1v8_reg regulator states
  ARM: dts: bcm2711: fix MDIO #address- and #size-cells
  ARM: dts: bcm283x: Fix VEC address for BCM2711
  firmware: arm_ffa: Fix __ffa_devices_unregister
  firmware: arm_ffa: Add missing remove callback to ffa_bus_type
This commit is contained in:
Linus Torvalds 2021-10-16 09:05:58 -07:00
commit f04298169d
10 changed files with 98 additions and 25 deletions

View File

@ -40,8 +40,8 @@
regulator-always-on;
regulator-settling-time-us = <5000>;
gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>;
states = <1800000 0x1
3300000 0x0>;
states = <1800000 0x1>,
<3300000 0x0>;
status = "okay";
};
@ -217,15 +217,16 @@
};
&pcie0 {
pci@1,0 {
pci@0,0 {
device_type = "pci";
#address-cells = <3>;
#size-cells = <2>;
ranges;
reg = <0 0 0 0 0>;
usb@1,0 {
reg = <0x10000 0 0 0 0>;
usb@0,0 {
reg = <0 0 0 0 0>;
resets = <&reset RASPBERRYPI_FIRMWARE_RESET_ID_USB>;
};
};

View File

@ -300,6 +300,14 @@
status = "disabled";
};
vec: vec@7ec13000 {
compatible = "brcm,bcm2711-vec";
reg = <0x7ec13000 0x1000>;
clocks = <&clocks BCM2835_CLOCK_VEC>;
interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
dvp: clock@7ef00000 {
compatible = "brcm,brcm2711-dvp";
reg = <0x7ef00000 0x10>;
@ -532,8 +540,8 @@
compatible = "brcm,genet-mdio-v5";
reg = <0xe14 0x8>;
reg-names = "mdio";
#address-cells = <0x0>;
#size-cells = <0x1>;
#address-cells = <0x1>;
#size-cells = <0x0>;
};
};
};

View File

@ -106,6 +106,14 @@
status = "okay";
};
vec: vec@7e806000 {
compatible = "brcm,bcm2835-vec";
reg = <0x7e806000 0x1000>;
clocks = <&clocks BCM2835_CLOCK_VEC>;
interrupts = <2 27>;
status = "disabled";
};
pixelvalve@7e807000 {
compatible = "brcm,bcm2835-pixelvalve2";
reg = <0x7e807000 0x100>;

View File

@ -464,14 +464,6 @@
status = "disabled";
};
vec: vec@7e806000 {
compatible = "brcm,bcm2835-vec";
reg = <0x7e806000 0x1000>;
clocks = <&clocks BCM2835_CLOCK_VEC>;
interrupts = <2 27>;
status = "disabled";
};
usb: usb@7e980000 {
compatible = "brcm,bcm2835-usb";
reg = <0x7e980000 0x10000>;

View File

@ -9,6 +9,7 @@
#include <linux/iopoll.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/platform_device.h>
#include <linux/reset-controller.h>
#include <linux/smp.h>
#include <asm/smp_plat.h>
@ -81,11 +82,6 @@ static const struct reset_control_ops imx_src_ops = {
.reset = imx_src_reset_module,
};
static struct reset_controller_dev imx_reset_controller = {
.ops = &imx_src_ops,
.nr_resets = ARRAY_SIZE(sw_reset_bits),
};
static void imx_gpcv2_set_m_core_pgc(bool enable, u32 offset)
{
writel_relaxed(enable, gpc_base + offset);
@ -177,10 +173,6 @@ void __init imx_src_init(void)
src_base = of_iomap(np, 0);
WARN_ON(!src_base);
imx_reset_controller.of_node = np;
if (IS_ENABLED(CONFIG_RESET_CONTROLLER))
reset_controller_register(&imx_reset_controller);
/*
* force warm reset sources to generate cold reset
* for a more reliable restart
@ -214,3 +206,33 @@ void __init imx7_src_init(void)
if (!gpc_base)
return;
}
static const struct of_device_id imx_src_dt_ids[] = {
{ .compatible = "fsl,imx51-src" },
{ /* sentinel */ }
};
static int imx_src_probe(struct platform_device *pdev)
{
struct reset_controller_dev *rcdev;
rcdev = devm_kzalloc(&pdev->dev, sizeof(*rcdev), GFP_KERNEL);
if (!rcdev)
return -ENOMEM;
rcdev->ops = &imx_src_ops;
rcdev->dev = &pdev->dev;
rcdev->of_node = pdev->dev.of_node;
rcdev->nr_resets = ARRAY_SIZE(sw_reset_bits);
return devm_reset_controller_register(&pdev->dev, rcdev);
}
static struct platform_driver imx_src_driver = {
.driver = {
.name = "imx-src",
.of_match_table = imx_src_dt_ids,
},
.probe = imx_src_probe,
};
builtin_platform_driver(imx_src_driver);

View File

@ -49,6 +49,13 @@ static int ffa_device_probe(struct device *dev)
return ffa_drv->probe(ffa_dev);
}
static void ffa_device_remove(struct device *dev)
{
struct ffa_driver *ffa_drv = to_ffa_driver(dev->driver);
ffa_drv->remove(to_ffa_dev(dev));
}
static int ffa_device_uevent(struct device *dev, struct kobj_uevent_env *env)
{
struct ffa_device *ffa_dev = to_ffa_dev(dev);
@ -86,6 +93,7 @@ struct bus_type ffa_bus_type = {
.name = "arm_ffa",
.match = ffa_device_match,
.probe = ffa_device_probe,
.remove = ffa_device_remove,
.uevent = ffa_device_uevent,
.dev_groups = ffa_device_attributes_groups,
};
@ -127,7 +135,7 @@ static void ffa_release_device(struct device *dev)
static int __ffa_devices_unregister(struct device *dev, void *data)
{
ffa_release_device(dev);
device_unregister(dev);
return 0;
}

View File

@ -355,6 +355,14 @@ config ARM_SMMU_DISABLE_BYPASS_BY_DEFAULT
'arm-smmu.disable_bypass' will continue to override this
config.
config ARM_SMMU_QCOM
def_tristate y
depends on ARM_SMMU && ARCH_QCOM
select QCOM_SCM
help
When running on a Qualcomm platform that has the custom variant
of the ARM SMMU, this needs to be built into the SMMU driver.
config ARM_SMMU_V3
tristate "ARM Ltd. System MMU Version 3 (SMMUv3) Support"
depends on ARM64

View File

@ -585,6 +585,9 @@ static int optee_remove(struct platform_device *pdev)
{
struct optee *optee = platform_get_drvdata(pdev);
/* Unregister OP-TEE specific client devices on TEE bus */
optee_unregister_devices();
/*
* Ask OP-TEE to free all cached shared memory objects to decrease
* reference counters and also avoid wild pointers in secure world

View File

@ -53,6 +53,13 @@ static int get_devices(struct tee_context *ctx, u32 session,
return 0;
}
static void optee_release_device(struct device *dev)
{
struct tee_client_device *optee_device = to_tee_client_device(dev);
kfree(optee_device);
}
static int optee_register_device(const uuid_t *device_uuid)
{
struct tee_client_device *optee_device = NULL;
@ -63,6 +70,7 @@ static int optee_register_device(const uuid_t *device_uuid)
return -ENOMEM;
optee_device->dev.bus = &tee_bus_type;
optee_device->dev.release = optee_release_device;
if (dev_set_name(&optee_device->dev, "optee-ta-%pUb", device_uuid)) {
kfree(optee_device);
return -ENOMEM;
@ -154,3 +162,17 @@ int optee_enumerate_devices(u32 func)
{
return __optee_enumerate_devices(func);
}
static int __optee_unregister_device(struct device *dev, void *data)
{
if (!strncmp(dev_name(dev), "optee-ta", strlen("optee-ta")))
device_unregister(dev);
return 0;
}
void optee_unregister_devices(void)
{
bus_for_each_dev(&tee_bus_type, NULL, NULL,
__optee_unregister_device);
}

View File

@ -184,6 +184,7 @@ void optee_fill_pages_list(u64 *dst, struct page **pages, int num_pages,
#define PTA_CMD_GET_DEVICES 0x0
#define PTA_CMD_GET_DEVICES_SUPP 0x1
int optee_enumerate_devices(u32 func);
void optee_unregister_devices(void);
/*
* Small helpers