Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-12-29 06:12:08 +00:00
Code Issues Packages Projects Releases Wiki Activity

dmaengine: doc: ReSTize client API doc

Browse Source 
This converts and moves client API file with some format
changes for RST style

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
This commit is contained in:
Vinod Koul 2017-11-03 10:19:39 +05:30 committed by Jonathan Corbet
parent 77fe661214
commit eeb1c64352
3 changed files with 286 additions and 222 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

222
Documentation/dmaengine/client.txt
View File

@ -1,222 +0,0 @@
DMA Engine API Guide
====================
Vinod Koul <vinod dot koul at intel.com>
NOTE: For DMA Engine usage in async_tx please see:
Documentation/crypto/async-tx-api.txt
Below is a guide to device driver writers on how to use the Slave-DMA API of the
DMA Engine. This is applicable only for slave DMA usage only.
The slave DMA usage consists of following steps:
1. Allocate a DMA slave channel
2. Set slave and controller specific parameters
3. Get a descriptor for transaction
4. Submit the transaction
5. Issue pending requests and wait for callback notification
1. Allocate a DMA slave channel
Channel allocation is slightly different in the slave DMA context,
client drivers typically need a channel from a particular DMA
controller only and even in some cases a specific channel is desired.
To request a channel dma_request_chan() API is used.
Interface:
struct dma_chan *dma_request_chan(struct device *dev, const char *name);
Which will find and return the 'name' DMA channel associated with the 'dev'
device. The association is done via DT, ACPI or board file based
dma_slave_map matching table.
A channel allocated via this interface is exclusive to the caller,
until dma_release_channel() is called.
2. Set slave and controller specific parameters
Next step is always to pass some specific information to the DMA
driver. Most of the generic information which a slave DMA can use
is in struct dma_slave_config. This allows the clients to specify
DMA direction, DMA addresses, bus widths, DMA burst lengths etc
for the peripheral.
If some DMA controllers have more parameters to be sent then they
should try to embed struct dma_slave_config in their controller
specific structure. That gives flexibility to client to pass more
parameters, if required.
Interface:
int dmaengine_slave_config(struct dma_chan *chan,
struct dma_slave_config *config)
Please see the dma_slave_config structure definition in dmaengine.h
for a detailed explanation of the struct members. Please note
that the 'direction' member will be going away as it duplicates the
direction given in the prepare call.
3. Get a descriptor for transaction
For slave usage the various modes of slave transfers supported by the
DMA-engine are:
slave_sg - DMA a list of scatter gather buffers from/to a peripheral
dma_cyclic - Perform a cyclic DMA operation from/to a peripheral till the
operation is explicitly stopped.
interleaved_dma - This is common to Slave as well as M2M clients. For slave
address of devices' fifo could be already known to the driver.
Various types of operations could be expressed by setting
appropriate values to the 'dma_interleaved_template' members.
A non-NULL return of this transfer API represents a "descriptor" for
the given transaction.
Interface:
struct dma_async_tx_descriptor *dmaengine_prep_slave_sg(
struct dma_chan *chan, struct scatterlist *sgl,
unsigned int sg_len, enum dma_data_direction direction,
unsigned long flags);
struct dma_async_tx_descriptor *dmaengine_prep_dma_cyclic(
struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len,
size_t period_len, enum dma_data_direction direction);
struct dma_async_tx_descriptor *dmaengine_prep_interleaved_dma(
struct dma_chan *chan, struct dma_interleaved_template *xt,
unsigned long flags);
The peripheral driver is expected to have mapped the scatterlist for
the DMA operation prior to calling dmaengine_prep_slave_sg(), and must
keep the scatterlist mapped until the DMA operation has completed.
The scatterlist must be mapped using the DMA struct device.
If a mapping needs to be synchronized later, dma_sync_*_for_*() must be
called using the DMA struct device, too.
So, normal setup should look like this:
nr_sg = dma_map_sg(chan->device->dev, sgl, sg_len);
if (nr_sg == 0)
/* error */
desc = dmaengine_prep_slave_sg(chan, sgl, nr_sg, direction, flags);
Once a descriptor has been obtained, the callback information can be
added and the descriptor must then be submitted. Some DMA engine
drivers may hold a spinlock between a successful preparation and
submission so it is important that these two operations are closely
paired.
Note:
Although the async_tx API specifies that completion callback
routines cannot submit any new operations, this is not the
case for slave/cyclic DMA.
For slave DMA, the subsequent transaction may not be available
for submission prior to callback function being invoked, so
slave DMA callbacks are permitted to prepare and submit a new
transaction.
For cyclic DMA, a callback function may wish to terminate the
DMA via dmaengine_terminate_async().
Therefore, it is important that DMA engine drivers drop any
locks before calling the callback function which may cause a
deadlock.
Note that callbacks will always be invoked from the DMA
engines tasklet, never from interrupt context.
4. Submit the transaction
Once the descriptor has been prepared and the callback information
added, it must be placed on the DMA engine drivers pending queue.
Interface:
dma_cookie_t dmaengine_submit(struct dma_async_tx_descriptor *desc)
This returns a cookie can be used to check the progress of DMA engine
activity via other DMA engine calls not covered in this document.
dmaengine_submit() will not start the DMA operation, it merely adds
it to the pending queue. For this, see step 5, dma_async_issue_pending.
5. Issue pending DMA requests and wait for callback notification
The transactions in the pending queue can be activated by calling the
issue_pending API. If channel is idle then the first transaction in
queue is started and subsequent ones queued up.
On completion of each DMA operation, the next in queue is started and
a tasklet triggered. The tasklet will then call the client driver
completion callback routine for notification, if set.
Interface:
void dma_async_issue_pending(struct dma_chan *chan);
Further APIs:
1. int dmaengine_terminate_sync(struct dma_chan *chan)
int dmaengine_terminate_async(struct dma_chan *chan)
int dmaengine_terminate_all(struct dma_chan *chan) /* DEPRECATED */
This causes all activity for the DMA channel to be stopped, and may
discard data in the DMA FIFO which hasn't been fully transferred.
No callback functions will be called for any incomplete transfers.
Two variants of this function are available.
dmaengine_terminate_async() might not wait until the DMA has been fully
stopped or until any running complete callbacks have finished. But it is
possible to call dmaengine_terminate_async() from atomic context or from
within a complete callback. dmaengine_synchronize() must be called before it
is safe to free the memory accessed by the DMA transfer or free resources
accessed from within the complete callback.
dmaengine_terminate_sync() will wait for the transfer and any running
complete callbacks to finish before it returns. But the function must not be
called from atomic context or from within a complete callback.
dmaengine_terminate_all() is deprecated and should not be used in new code.
2. int dmaengine_pause(struct dma_chan *chan)
This pauses activity on the DMA channel without data loss.
3. int dmaengine_resume(struct dma_chan *chan)
Resume a previously paused DMA channel. It is invalid to resume a
channel which is not currently paused.
4. enum dma_status dma_async_is_tx_complete(struct dma_chan *chan,
dma_cookie_t cookie, dma_cookie_t *last, dma_cookie_t *used)
This can be used to check the status of the channel. Please see
the documentation in include/linux/dmaengine.h for a more complete
description of this API.
This can be used in conjunction with dma_async_is_complete() and
the cookie returned from dmaengine_submit() to check for
completion of a specific DMA transaction.
Note:
Not all DMA engine drivers can return reliable information for
a running DMA channel. It is recommended that DMA engine users
pause or stop (via dmaengine_terminate_all()) the channel before
using this API.
5. void dmaengine_synchronize(struct dma_chan *chan)
Synchronize the termination of the DMA channel to the current context.
This function should be used after dmaengine_terminate_async() to synchronize
the termination of the DMA channel to the current context. The function will
wait for the transfer and any running complete callbacks to finish before it
returns.
If dmaengine_terminate_async() is used to stop the DMA channel this function
must be called before it is safe to free memory accessed by previously
submitted descriptors or to free any resources accessed within the complete
callback of previously submitted descriptors.
The behavior of this function is undefined if dma_async_issue_pending() has
been called between dmaengine_terminate_async() and this function.

275
Documentation/driver-api/dmaengine/client.rst Normal file
View File

@ -0,0 +1,275 @@
====================
DMA Engine API Guide
====================
Vinod Koul <vinod dot koul at intel.com>
.. note:: For DMA Engine usage in async_tx please see:
``Documentation/crypto/async-tx-api.txt``
Below is a guide to device driver writers on how to use the Slave-DMA API of the
DMA Engine. This is applicable only for slave DMA usage only.
DMA usage
=========
The slave DMA usage consists of following steps:
- Allocate a DMA slave channel
- Set slave and controller specific parameters
- Get a descriptor for transaction
- Submit the transaction
- Issue pending requests and wait for callback notification
The details of these operations are:
1. Allocate a DMA slave channel
Channel allocation is slightly different in the slave DMA context,
client drivers typically need a channel from a particular DMA
controller only and even in some cases a specific channel is desired.
To request a channel dma_request_chan() API is used.
Interface:
.. code-block:: c
struct dma_chan *dma_request_chan(struct device *dev, const char *name);
Which will find and return the ``name`` DMA channel associated with the 'dev'
device. The association is done via DT, ACPI or board file based
dma_slave_map matching table.
A channel allocated via this interface is exclusive to the caller,
until dma_release_channel() is called.
2. Set slave and controller specific parameters
Next step is always to pass some specific information to the DMA
driver. Most of the generic information which a slave DMA can use
is in struct dma_slave_config. This allows the clients to specify
DMA direction, DMA addresses, bus widths, DMA burst lengths etc
for the peripheral.
If some DMA controllers have more parameters to be sent then they
should try to embed struct dma_slave_config in their controller
specific structure. That gives flexibility to client to pass more
parameters, if required.
Interface:
.. code-block:: c
int dmaengine_slave_config(struct dma_chan *chan,
struct dma_slave_config *config)
Please see the dma_slave_config structure definition in dmaengine.h
for a detailed explanation of the struct members. Please note
that the 'direction' member will be going away as it duplicates the
direction given in the prepare call.
3. Get a descriptor for transaction
For slave usage the various modes of slave transfers supported by the
DMA-engine are:
- slave_sg: DMA a list of scatter gather buffers from/to a peripheral
- dma_cyclic: Perform a cyclic DMA operation from/to a peripheral till the
operation is explicitly stopped.
- interleaved_dma: This is common to Slave as well as M2M clients. For slave
address of devices' fifo could be already known to the driver.
Various types of operations could be expressed by setting
appropriate values to the 'dma_interleaved_template' members.
A non-NULL return of this transfer API represents a "descriptor" for
the given transaction.
Interface:
.. code-block:: c
struct dma_async_tx_descriptor *dmaengine_prep_slave_sg(
struct dma_chan *chan, struct scatterlist *sgl,
unsigned int sg_len, enum dma_data_direction direction,
unsigned long flags);
struct dma_async_tx_descriptor *dmaengine_prep_dma_cyclic(
struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len,
size_t period_len, enum dma_data_direction direction);
struct dma_async_tx_descriptor *dmaengine_prep_interleaved_dma(
struct dma_chan *chan, struct dma_interleaved_template *xt,
unsigned long flags);
The peripheral driver is expected to have mapped the scatterlist for
the DMA operation prior to calling dmaengine_prep_slave_sg(), and must
keep the scatterlist mapped until the DMA operation has completed.
The scatterlist must be mapped using the DMA struct device.
If a mapping needs to be synchronized later, dma_sync_*_for_*() must be
called using the DMA struct device, too.
So, normal setup should look like this:
.. code-block:: c
nr_sg = dma_map_sg(chan->device->dev, sgl, sg_len);
if (nr_sg == 0)
/* error */
desc = dmaengine_prep_slave_sg(chan, sgl, nr_sg, direction, flags);
Once a descriptor has been obtained, the callback information can be
added and the descriptor must then be submitted. Some DMA engine
drivers may hold a spinlock between a successful preparation and
submission so it is important that these two operations are closely
paired.
.. note::
Although the async_tx API specifies that completion callback
routines cannot submit any new operations, this is not the
case for slave/cyclic DMA.
For slave DMA, the subsequent transaction may not be available
for submission prior to callback function being invoked, so
slave DMA callbacks are permitted to prepare and submit a new
transaction.
For cyclic DMA, a callback function may wish to terminate the
DMA via dmaengine_terminate_async().
Therefore, it is important that DMA engine drivers drop any
locks before calling the callback function which may cause a
deadlock.
Note that callbacks will always be invoked from the DMA
engines tasklet, never from interrupt context.
4. Submit the transaction
Once the descriptor has been prepared and the callback information
added, it must be placed on the DMA engine drivers pending queue.
Interface:
.. code-block:: c
dma_cookie_t dmaengine_submit(struct dma_async_tx_descriptor *desc)
This returns a cookie can be used to check the progress of DMA engine
activity via other DMA engine calls not covered in this document.
dmaengine_submit() will not start the DMA operation, it merely adds
it to the pending queue. For this, see step 5, dma_async_issue_pending.
5. Issue pending DMA requests and wait for callback notification
The transactions in the pending queue can be activated by calling the
issue_pending API. If channel is idle then the first transaction in
queue is started and subsequent ones queued up.
On completion of each DMA operation, the next in queue is started and
a tasklet triggered. The tasklet will then call the client driver
completion callback routine for notification, if set.
Interface:
.. code-block:: c
void dma_async_issue_pending(struct dma_chan *chan);
Further APIs:
------------
1. Terminate APIs
.. code-block:: c
int dmaengine_terminate_sync(struct dma_chan *chan)
int dmaengine_terminate_async(struct dma_chan *chan)
int dmaengine_terminate_all(struct dma_chan *chan) /* DEPRECATED */
This causes all activity for the DMA channel to be stopped, and may
discard data in the DMA FIFO which hasn't been fully transferred.
No callback functions will be called for any incomplete transfers.
Two variants of this function are available.
dmaengine_terminate_async() might not wait until the DMA has been fully
stopped or until any running complete callbacks have finished. But it is
possible to call dmaengine_terminate_async() from atomic context or from
within a complete callback. dmaengine_synchronize() must be called before it
is safe to free the memory accessed by the DMA transfer or free resources
accessed from within the complete callback.
dmaengine_terminate_sync() will wait for the transfer and any running
complete callbacks to finish before it returns. But the function must not be
called from atomic context or from within a complete callback.
dmaengine_terminate_all() is deprecated and should not be used in new code.
2. Pause API
.. code-block:: c
int dmaengine_pause(struct dma_chan *chan)
This pauses activity on the DMA channel without data loss.
3. Resume API
.. code-block:: c
int dmaengine_resume(struct dma_chan *chan)
Resume a previously paused DMA channel. It is invalid to resume a
channel which is not currently paused.
4. Check Txn complete
.. code-block:: c
enum dma_status dma_async_is_tx_complete(struct dma_chan *chan,
dma_cookie_t cookie, dma_cookie_t *last, dma_cookie_t *used)
This can be used to check the status of the channel. Please see
the documentation in include/linux/dmaengine.h for a more complete
description of this API.
This can be used in conjunction with dma_async_is_complete() and
the cookie returned from dmaengine_submit() to check for
completion of a specific DMA transaction.
.. note::
Not all DMA engine drivers can return reliable information for
a running DMA channel. It is recommended that DMA engine users
pause or stop (via dmaengine_terminate_all()) the channel before
using this API.
5. Synchronize termination API
.. code-block:: c
void dmaengine_synchronize(struct dma_chan *chan)
Synchronize the termination of the DMA channel to the current context.
This function should be used after dmaengine_terminate_async() to synchronize
the termination of the DMA channel to the current context. The function will
wait for the transfer and any running complete callbacks to finish before it
returns.
If dmaengine_terminate_async() is used to stop the DMA channel this function
must be called before it is safe to free memory accessed by previously
submitted descriptors or to free any resources accessed within the complete
callback of previously submitted descriptors.
The behavior of this function is undefined if dma_async_issue_pending() has
been called between dmaengine_terminate_async() and this function.

11
Documentation/driver-api/dmaengine/index.rst
View File

@ -16,6 +16,17 @@ driver writers.
provider
DMAEngine client documentation
------------------------------
This book is a guide to device driver writers on how to use the Slave-DMA
API of the DMAEngine. This is applicable only for slave DMA usage only.
.. toctree::
:maxdepth: 1
client
.. only:: subproject
Indices