Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-15 00:21:59 +00:00
Code Issues Packages Projects Releases Wiki Activity

net: axienet: add support for standard phy-mode binding

Browse Source 
Keep supporting proprietary "xlnx,phy-type" attribute and add support for
MII connectivity to the PHY.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Alvaro Gamez Machado <alvaro.gamez@hazent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Alvaro G. M 2017-07-17 09:12:28 +02:00 committed by David S. Miller
parent a288855151
commit ee06b1728b
3 changed files with 93 additions and 14 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

55
Documentation/devicetree/bindings/net/xilinx_axienet.txt Normal file
View File

@ -0,0 +1,55 @@
XILINX AXI ETHERNET Device Tree Bindings
--------------------------------------------------------
Also called AXI 1G/2.5G Ethernet Subsystem, the xilinx axi ethernet IP core
provides connectivity to an external ethernet PHY supporting different
interfaces: MII, GMII, RGMII, SGMII, 1000BaseX. It also includes two
segments of memory for buffering TX and RX, as well as the capability of
offloading TX/RX checksum calculation off the processor.
Management configuration is done through the AXI interface, while payload is
sent and received through means of an AXI DMA controller. This driver
includes the DMA driver code, so this driver is incompatible with AXI DMA
driver.
For more details about mdio please refer phy.txt file in the same directory.
Required properties:
- compatible : Must be one of "xlnx,axi-ethernet-1.00.a",
"xlnx,axi-ethernet-1.01.a", "xlnx,axi-ethernet-2.01.a"
- reg : Address and length of the IO space.
- interrupts : Should be a list of two interrupt, TX and RX.
- phy-handle : Should point to the external phy device.
See ethernet.txt file in the same directory.
- xlnx,rxmem : Set to allocated memory buffer for Rx/Tx in the hardware
Optional properties:
- phy-mode : See ethernet.txt
- xlnx,phy-type : Deprecated, do not use, but still accepted in preference
to phy-mode.
- xlnx,txcsum : 0 or empty for disabling TX checksum offload,
1 to enable partial TX checksum offload,
2 to enable full TX checksum offload
- xlnx,rxcsum : Same values as xlnx,txcsum but for RX checksum offload
Example:
axi_ethernet_eth: ethernet@40c00000 {
compatible = "xlnx,axi-ethernet-1.00.a";
device_type = "network";
interrupt-parent = <&microblaze_0_axi_intc>;
interrupts = <2 0>;
phy-mode = "mii";
reg = <0x40c00000 0x40000>;
xlnx,rxcsum = <0x2>;
xlnx,rxmem = <0x800>;
xlnx,txcsum = <0x2>;
phy-handle = <&phy0>;
axi_ethernetlite_0_mdio: mdio {
#address-cells = <1>;
#size-cells = <0>;
phy0: phy@0 {
device_type = "ethernet-phy";
reg = <1>;
};
};
};

4
drivers/net/ethernet/xilinx/xilinx_axienet.h
View File

@ -389,7 +389,7 @@ struct axidma_bd {
* @dma_err_tasklet: Tasklet structure to process Axi DMA errors
* @tx_irq: Axidma TX IRQ number
* @rx_irq: Axidma RX IRQ number
* @phy_type: Phy type to identify between MII/GMII/RGMII/SGMII/1000 Base-X
* @phy_mode: Phy type to identify between MII/GMII/RGMII/SGMII/1000 Base-X
* @options: AxiEthernet option word
* @last_link: Phy link state in which the PHY was negotiated earlier
* @features: Stores the extended features supported by the axienet hw
@ -432,7 +432,7 @@ struct axienet_local {
int tx_irq;
int rx_irq;
u32 phy_type;
phy_interface_t phy_mode;
u32 options; /* Current options word */
u32 last_link;

48
drivers/net/ethernet/xilinx/xilinx_axienet_main.c
View File

@ -531,11 +531,11 @@ static void axienet_adjust_link(struct net_device *ndev)
link_state = phy->speed | (phy->duplex << 1) | phy->link;
if (lp->last_link != link_state) {
if ((phy->speed == SPEED_10) || (phy->speed == SPEED_100)) {
if (lp->phy_type == XAE_PHY_TYPE_1000BASE_X)
if (lp->phy_mode == PHY_INTERFACE_MODE_1000BASEX)
setspeed = 0;
} else {
if ((phy->speed == SPEED_1000) &&
(lp->phy_type == XAE_PHY_TYPE_MII))
(lp->phy_mode == PHY_INTERFACE_MODE_MII))
setspeed = 0;
}
@ -935,15 +935,8 @@ static int axienet_open(struct net_device *ndev)
return ret;
if (lp->phy_node) {
if (lp->phy_type == XAE_PHY_TYPE_GMII) {
phydev = of_phy_connect(lp->ndev, lp->phy_node,
axienet_adjust_link, 0,
PHY_INTERFACE_MODE_GMII);
} else if (lp->phy_type == XAE_PHY_TYPE_RGMII_2_0) {
phydev = of_phy_connect(lp->ndev, lp->phy_node,
axienet_adjust_link, 0,
PHY_INTERFACE_MODE_RGMII_ID);
}
phydev = of_phy_connect(lp->ndev, lp->phy_node,
axienet_adjust_link, 0, lp->phy_mode);
if (!phydev)
dev_err(lp->dev, "of_phy_connect() failed\n");
@ -1539,7 +1532,38 @@ static int axienet_probe(struct platform_device *pdev)
* the device-tree and accordingly set flags.
*/
of_property_read_u32(pdev->dev.of_node, "xlnx,rxmem", &lp->rxmem);
of_property_read_u32(pdev->dev.of_node, "xlnx,phy-type", &lp->phy_type);
/* Start with the proprietary, and broken phy_type */
ret = of_property_read_u32(pdev->dev.of_node, "xlnx,phy-type", &value);
if (!ret) {
netdev_warn(ndev, "Please upgrade your device tree binary blob to use phy-mode");
switch (value) {
case XAE_PHY_TYPE_MII:
lp->phy_mode = PHY_INTERFACE_MODE_MII;
break;
case XAE_PHY_TYPE_GMII:
lp->phy_mode = PHY_INTERFACE_MODE_GMII;
break;
case XAE_PHY_TYPE_RGMII_2_0:
lp->phy_mode = PHY_INTERFACE_MODE_RGMII_ID;
break;
case XAE_PHY_TYPE_SGMII:
lp->phy_mode = PHY_INTERFACE_MODE_SGMII;
break;
case XAE_PHY_TYPE_1000BASE_X:
lp->phy_mode = PHY_INTERFACE_MODE_1000BASEX;
break;
default:
ret = -EINVAL;
goto free_netdev;
}
} else {
lp->phy_mode = of_get_phy_mode(pdev->dev.of_node);
if (lp->phy_mode < 0) {
ret = -EINVAL;
goto free_netdev;
}
}
/* Find the DMA node, map the DMA registers, and decode the DMA IRQs */
np = of_parse_phandle(pdev->dev.of_node, "axistream-connected", 0);