mirror of
https://github.com/torvalds/linux.git
synced 2024-12-29 14:21:47 +00:00
drm/bridge: samsung-dsim: reread ref clock before configuring PLL
The PLL reference clock may change at runtime when its parent clock changes. For example, this may happen on the i.MX8M Nano if the reference clock is a child of the Video PLL. If the pixel clock changes, this may propagate to the Video PLL and as a side effect change the reference clock. Thus, reading the clock rate during probe is not sufficient to correctly configure the PLL for the expected hs clock. Read the actual rate of the reference clock before calculating the PLL configuration parameters. Note that the "samsung,pll-clock-frequency" is always preferred and PLL reference clock is only read from the clock tree if that device tree property is not set. Reviewed-by: Inki Dae <inki.dae@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> # Kontron BL i.MX8MM + Waveshare 10.1inch HDMI LCD (E) Reviewed-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20230818-samsung-dsim-v2-2-846603df0e0a@pengutronix.de Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230818-samsung-dsim-v2-2-846603df0e0a@pengutronix.de
This commit is contained in:
parent
3683182a72
commit
eb26c6ab2a
@ -614,7 +614,12 @@ static unsigned long samsung_dsim_set_pll(struct samsung_dsim *dsi,
|
||||
u16 m;
|
||||
u32 reg;
|
||||
|
||||
fin = dsi->pll_clk_rate;
|
||||
if (dsi->pll_clk)
|
||||
fin = clk_get_rate(dsi->pll_clk);
|
||||
else
|
||||
fin = dsi->pll_clk_rate;
|
||||
dev_dbg(dsi->dev, "PLL ref clock freq %lu\n", fin);
|
||||
|
||||
fout = samsung_dsim_pll_find_pms(dsi, fin, freq, &p, &m, &s);
|
||||
if (!fout) {
|
||||
dev_err(dsi->dev,
|
||||
@ -1829,18 +1834,15 @@ static int samsung_dsim_parse_dt(struct samsung_dsim *dsi)
|
||||
u32 lane_polarities[5] = { 0 };
|
||||
struct device_node *endpoint;
|
||||
int i, nr_lanes, ret;
|
||||
struct clk *pll_clk;
|
||||
|
||||
ret = samsung_dsim_of_read_u32(node, "samsung,pll-clock-frequency",
|
||||
&dsi->pll_clk_rate, 1);
|
||||
/* If it doesn't exist, read it from the clock instead of failing */
|
||||
if (ret < 0) {
|
||||
dev_dbg(dev, "Using sclk_mipi for pll clock frequency\n");
|
||||
pll_clk = devm_clk_get(dev, "sclk_mipi");
|
||||
if (!IS_ERR(pll_clk))
|
||||
dsi->pll_clk_rate = clk_get_rate(pll_clk);
|
||||
else
|
||||
return PTR_ERR(pll_clk);
|
||||
dsi->pll_clk = devm_clk_get(dev, "sclk_mipi");
|
||||
if (IS_ERR(dsi->pll_clk))
|
||||
return PTR_ERR(dsi->pll_clk);
|
||||
}
|
||||
|
||||
/* If it doesn't exist, use pixel clock instead of failing */
|
||||
|
@ -88,6 +88,7 @@ struct samsung_dsim {
|
||||
void __iomem *reg_base;
|
||||
struct phy *phy;
|
||||
struct clk **clks;
|
||||
struct clk *pll_clk;
|
||||
struct regulator_bulk_data supplies[2];
|
||||
int irq;
|
||||
struct gpio_desc *te_gpio;
|
||||
|
Loading…
Reference in New Issue
Block a user