mmc: sh_mobile_sdhi: improve prerequisites for tuning

Prerequisites for tuning are the same as for hw_reset. We need an SCC
and a supported mode. Populate the tuning related functions only when
those conditions are met. This also removes a tiny race window.
Previously, the functions were populated when the SCC offset was not
initialized which could have led to an OOPS.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This commit is contained in:
Wolfram Sang 2016-12-12 20:51:22 +01:00 committed by Ulf Hansson
parent 6ade9a2c2d
commit e831ead3b3

View File

@ -621,11 +621,6 @@ static int sh_mobile_sdhi_probe(struct platform_device *pdev)
host->card_busy = sh_mobile_sdhi_card_busy;
host->start_signal_voltage_switch =
sh_mobile_sdhi_start_signal_voltage_switch;
host->init_tuning = sh_mobile_sdhi_init_tuning;
host->prepare_tuning = sh_mobile_sdhi_prepare_tuning;
host->select_tuning = sh_mobile_sdhi_select_tuning;
host->check_scc_error = sh_mobile_sdhi_check_scc_error;
host->hw_reset = sh_mobile_sdhi_hw_reset;
}
/* Orginally registers were 16 bit apart, could be 32 or 64 nowadays */
@ -666,6 +661,7 @@ static int sh_mobile_sdhi_probe(struct platform_device *pdev)
if (ret < 0)
goto efree;
/* Enable tuning iff we have an SCC and a supported mode */
if (of_data && of_data->scc_offset && host->mmc->caps & MMC_CAP_UHS_SDR104) {
const struct sh_mobile_sdhi_scc *taps = of_data->taps;
bool hit = false;
@ -685,6 +681,11 @@ static int sh_mobile_sdhi_probe(struct platform_device *pdev)
dev_warn(&host->pdev->dev, "Unknown clock rate for SDR104\n");
priv->scc_ctl = host->ctl + of_data->scc_offset;
host->init_tuning = sh_mobile_sdhi_init_tuning;
host->prepare_tuning = sh_mobile_sdhi_prepare_tuning;
host->select_tuning = sh_mobile_sdhi_select_tuning;
host->check_scc_error = sh_mobile_sdhi_check_scc_error;
host->hw_reset = sh_mobile_sdhi_hw_reset;
}
i = 0;