mirror of
https://github.com/torvalds/linux.git
synced 2024-12-29 14:21:47 +00:00
video: backlight: mt6370: Add MediaTek MT6370 support
MediaTek MT6370 is a SubPMIC consisting of a single cell battery charger with ADC monitoring, RGB LEDs, dual channel flashlight, WLED backlight driver, display bias voltage supply, one general purpose LDO, and the USB Type-C & PD controller complies with the latest USB Type-C and PD standards. Add support for the MediaTek MT6370 backlight driver. It controls 4 channels of 8 series WLEDs in 2048 (only for MT6370/MT6371) / 16384 (only for MT6372) current steps (30 mA) in exponential or linear mapping curves. Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: ChiaEn Wu <chiaen_wu@richtek.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20220830034042.9354-11-peterwu.pub@gmail.com
This commit is contained in:
ChiaEn Wu
Lee Jones
parent
16813ec5e0
commit
e7647de058
@ -268,6 +268,19 @@ config BACKLIGHT_MAX8925
|
||||
If you have a LCD backlight connected to the WLED output of MAX8925
|
||||
WLED output, say Y here to enable this driver.
|
||||
|
||||
config BACKLIGHT_MT6370
|
||||
tristate "MediaTek MT6370 Backlight Driver"
|
||||
depends on MFD_MT6370
|
||||
help
|
||||
This enables support for Mediatek MT6370 Backlight driver.
|
||||
It's commonly used to drive the display WLED. There are 4 channels
|
||||
inside, and each channel supports up to 30mA of current capability
|
||||
with 2048 current steps (only for MT6370/MT6371) or 16384 current
|
||||
steps (only for MT6372) in exponential or linear mapping curves.
|
||||
|
||||
This driver can also be built as a module. If so, the module
|
||||
will be called "mt6370-backlight".
|
||||
|
||||
config BACKLIGHT_APPLE
|
||||
tristate "Apple Backlight Driver"
|
||||
depends on X86 && ACPI
|
||||
|
||||
@ -44,6 +44,7 @@ obj-$(CONFIG_BACKLIGHT_LP855X) += lp855x_bl.o
|
||||
obj-$(CONFIG_BACKLIGHT_LP8788) += lp8788_bl.o
|
||||
obj-$(CONFIG_BACKLIGHT_LV5207LP) += lv5207lp.o
|
||||
obj-$(CONFIG_BACKLIGHT_MAX8925) += max8925_bl.o
|
||||
obj-$(CONFIG_BACKLIGHT_MT6370) += mt6370-backlight.o
|
||||
obj-$(CONFIG_BACKLIGHT_OMAP1) += omap1_bl.o
|
||||
obj-$(CONFIG_BACKLIGHT_PANDORA) += pandora_bl.o
|
||||
obj-$(CONFIG_BACKLIGHT_PCF50633) += pcf50633-backlight.o
|
||||
|
||||
351
drivers/video/backlight/mt6370-backlight.c
Normal file
351
drivers/video/backlight/mt6370-backlight.c
Normal file
@ -0,0 +1,351 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-only
|
||||
/*
|
||||
* Copyright (C) 2022 Richtek Technology Corp.
|
||||
*
|
||||
* Author: ChiaEn Wu <chiaen_wu@richtek.com>
|
||||
*/
|
||||
|
||||
#include <linux/backlight.h>
|
||||
#include <linux/bitfield.h>
|
||||
#include <linux/bits.h>
|
||||
#include <linux/gpio/consumer.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/minmax.h>
|
||||
#include <linux/mod_devicetable.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/property.h>
|
||||
#include <linux/regmap.h>
|
||||
|
||||
#define MT6370_REG_DEV_INFO 0x100
|
||||
#define MT6370_REG_BL_EN 0x1A0
|
||||
#define MT6370_REG_BL_BSTCTRL 0x1A1
|
||||
#define MT6370_REG_BL_PWM 0x1A2
|
||||
#define MT6370_REG_BL_DIM2 0x1A4
|
||||
|
||||
#define MT6370_VENID_MASK GENMASK(7, 4)
|
||||
#define MT6370_BL_EXT_EN_MASK BIT(7)
|
||||
#define MT6370_BL_EN_MASK BIT(6)
|
||||
#define MT6370_BL_CODE_MASK BIT(0)
|
||||
#define MT6370_BL_CH_MASK GENMASK(5, 2)
|
||||
#define MT6370_BL_CH_SHIFT 2
|
||||
#define MT6370_BL_DIM2_COMMON_MASK GENMASK(2, 0)
|
||||
#define MT6370_BL_DIM2_COMMON_SHIFT 3
|
||||
#define MT6370_BL_DIM2_6372_MASK GENMASK(5, 0)
|
||||
#define MT6370_BL_DIM2_6372_SHIFT 6
|
||||
#define MT6370_BL_PWM_EN_MASK BIT(7)
|
||||
#define MT6370_BL_PWM_HYS_EN_MASK BIT(2)
|
||||
#define MT6370_BL_PWM_HYS_SEL_MASK GENMASK(1, 0)
|
||||
#define MT6370_BL_OVP_EN_MASK BIT(7)
|
||||
#define MT6370_BL_OVP_SEL_MASK GENMASK(6, 5)
|
||||
#define MT6370_BL_OVP_SEL_SHIFT 5
|
||||
#define MT6370_BL_OC_EN_MASK BIT(3)
|
||||
#define MT6370_BL_OC_SEL_MASK GENMASK(2, 1)
|
||||
#define MT6370_BL_OC_SEL_SHIFT 1
|
||||
|
||||
#define MT6370_BL_PWM_HYS_TH_MIN_STEP 1
|
||||
#define MT6370_BL_PWM_HYS_TH_MAX_STEP 64
|
||||
#define MT6370_BL_OVP_MIN_UV 17000000
|
||||
#define MT6370_BL_OVP_MAX_UV 29000000
|
||||
#define MT6370_BL_OVP_STEP_UV 4000000
|
||||
#define MT6370_BL_OCP_MIN_UA 900000
|
||||
#define MT6370_BL_OCP_MAX_UA 1800000
|
||||
#define MT6370_BL_OCP_STEP_UA 300000
|
||||
#define MT6370_BL_MAX_COMMON_BRIGHTNESS 2048
|
||||
#define MT6370_BL_MAX_6372_BRIGHTNESS 16384
|
||||
#define MT6370_BL_MAX_CH 15
|
||||
|
||||
enum {
|
||||
MT6370_VID_COMMON = 1,
|
||||
MT6370_VID_6372,
|
||||
};
|
||||
|
||||
struct mt6370_priv {
|
||||
u8 dim2_mask;
|
||||
u8 dim2_shift;
|
||||
int def_max_brightness;
|
||||
struct backlight_device *bl;
|
||||
struct device *dev;
|
||||
struct gpio_desc *enable_gpio;
|
||||
struct regmap *regmap;
|
||||
};
|
||||
|
||||
static int mt6370_bl_update_status(struct backlight_device *bl_dev)
|
||||
{
|
||||
struct mt6370_priv *priv = bl_get_data(bl_dev);
|
||||
int brightness = backlight_get_brightness(bl_dev);
|
||||
unsigned int enable_val;
|
||||
u8 brightness_val[2];
|
||||
int ret;
|
||||
|
||||
if (brightness) {
|
||||
brightness_val[0] = (brightness - 1) & priv->dim2_mask;
|
||||
brightness_val[1] = (brightness - 1) >> priv->dim2_shift;
|
||||
|
||||
ret = regmap_raw_write(priv->regmap, MT6370_REG_BL_DIM2,
|
||||
brightness_val, sizeof(brightness_val));
|
||||
if (ret)
|
||||
return ret;
|
||||
}
|
||||
|
||||
gpiod_set_value(priv->enable_gpio, !!brightness);
|
||||
|
||||
enable_val = brightness ? MT6370_BL_EN_MASK : 0;
|
||||
return regmap_update_bits(priv->regmap, MT6370_REG_BL_EN,
|
||||
MT6370_BL_EN_MASK, enable_val);
|
||||
}
|
||||
|
||||
static int mt6370_bl_get_brightness(struct backlight_device *bl_dev)
|
||||
{
|
||||
struct mt6370_priv *priv = bl_get_data(bl_dev);
|
||||
unsigned int enable;
|
||||
u8 brightness_val[2];
|
||||
int brightness, ret;
|
||||
|
||||
ret = regmap_read(priv->regmap, MT6370_REG_BL_EN, &enable);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
if (!(enable & MT6370_BL_EN_MASK))
|
||||
return 0;
|
||||
|
||||
ret = regmap_raw_read(priv->regmap, MT6370_REG_BL_DIM2,
|
||||
brightness_val, sizeof(brightness_val));
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
brightness = brightness_val[1] << priv->dim2_shift;
|
||||
brightness += brightness_val[0] & priv->dim2_mask;
|
||||
|
||||
return brightness + 1;
|
||||
}
|
||||
|
||||
static const struct backlight_ops mt6370_bl_ops = {
|
||||
.options = BL_CORE_SUSPENDRESUME,
|
||||
.update_status = mt6370_bl_update_status,
|
||||
.get_brightness = mt6370_bl_get_brightness,
|
||||
};
|
||||
|
||||
static int mt6370_init_backlight_properties(struct mt6370_priv *priv,
|
||||
struct backlight_properties *props)
|
||||
{
|
||||
struct device *dev = priv->dev;
|
||||
u8 prop_val;
|
||||
u32 brightness, ovp_uV, ocp_uA;
|
||||
unsigned int mask, val;
|
||||
int ret;
|
||||
|
||||
/* Vendor optional properties */
|
||||
val = 0;
|
||||
if (device_property_read_bool(dev, "mediatek,bled-pwm-enable"))
|
||||
val |= MT6370_BL_PWM_EN_MASK;
|
||||
|
||||
if (device_property_read_bool(dev, "mediatek,bled-pwm-hys-enable"))
|
||||
val |= MT6370_BL_PWM_HYS_EN_MASK;
|
||||
|
||||
ret = device_property_read_u8(dev,
|
||||
"mediatek,bled-pwm-hys-input-th-steps",
|
||||
&prop_val);
|
||||
if (!ret) {
|
||||
prop_val = clamp_val(prop_val,
|
||||
MT6370_BL_PWM_HYS_TH_MIN_STEP,
|
||||
MT6370_BL_PWM_HYS_TH_MAX_STEP);
|
||||
prop_val = prop_val <= 1 ? 0 :
|
||||
prop_val <= 4 ? 1 :
|
||||
prop_val <= 16 ? 2 : 3;
|
||||
val |= prop_val;
|
||||
}
|
||||
|
||||
ret = regmap_update_bits(priv->regmap, MT6370_REG_BL_PWM,
|
||||
val, val);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
val = 0;
|
||||
if (device_property_read_bool(dev, "mediatek,bled-ovp-shutdown"))
|
||||
val |= MT6370_BL_OVP_EN_MASK;
|
||||
|
||||
ret = device_property_read_u32(dev, "mediatek,bled-ovp-microvolt",
|
||||
&ovp_uV);
|
||||
if (!ret) {
|
||||
ovp_uV = clamp_val(ovp_uV, MT6370_BL_OVP_MIN_UV,
|
||||
MT6370_BL_OVP_MAX_UV);
|
||||
ovp_uV = DIV_ROUND_UP(ovp_uV - MT6370_BL_OVP_MIN_UV,
|
||||
MT6370_BL_OVP_STEP_UV);
|
||||
val |= ovp_uV << MT6370_BL_OVP_SEL_SHIFT;
|
||||
}
|
||||
|
||||
if (device_property_read_bool(dev, "mediatek,bled-ocp-shutdown"))
|
||||
val |= MT6370_BL_OC_EN_MASK;
|
||||
|
||||
ret = device_property_read_u32(dev, "mediatek,bled-ocp-microamp",
|
||||
&ocp_uA);
|
||||
if (!ret) {
|
||||
ocp_uA = clamp_val(ocp_uA, MT6370_BL_OCP_MIN_UA,
|
||||
MT6370_BL_OCP_MAX_UA);
|
||||
ocp_uA = DIV_ROUND_UP(ocp_uA - MT6370_BL_OCP_MIN_UA,
|
||||
MT6370_BL_OCP_STEP_UA);
|
||||
val |= ocp_uA << MT6370_BL_OC_SEL_SHIFT;
|
||||
}
|
||||
|
||||
ret = regmap_update_bits(priv->regmap, MT6370_REG_BL_BSTCTRL,
|
||||
val, val);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
/* Common properties */
|
||||
ret = device_property_read_u32(dev, "max-brightness", &brightness);
|
||||
if (ret)
|
||||
brightness = priv->def_max_brightness;
|
||||
|
||||
props->max_brightness = min_t(u32, brightness, priv->def_max_brightness);
|
||||
|
||||
ret = device_property_read_u32(dev, "default-brightness", &brightness);
|
||||
if (ret)
|
||||
brightness = props->max_brightness;
|
||||
|
||||
props->brightness = min_t(u32, brightness, props->max_brightness);
|
||||
|
||||
val = 0;
|
||||
if (device_property_read_bool(dev, "mediatek,bled-exponential-mode-enable")) {
|
||||
val |= MT6370_BL_CODE_MASK;
|
||||
props->scale = BACKLIGHT_SCALE_NON_LINEAR;
|
||||
} else
|
||||
props->scale = BACKLIGHT_SCALE_LINEAR;
|
||||
|
||||
ret = device_property_read_u8(dev, "mediatek,bled-channel-use",
|
||||
&prop_val);
|
||||
if (ret) {
|
||||
dev_err(dev, "mediatek,bled-channel-use DT property missing\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
if (!prop_val || prop_val > MT6370_BL_MAX_CH) {
|
||||
dev_err(dev,
|
||||
"No channel specified or over than upper bound (%d)\n",
|
||||
prop_val);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
mask = MT6370_BL_EXT_EN_MASK | MT6370_BL_CH_MASK;
|
||||
val |= prop_val << MT6370_BL_CH_SHIFT;
|
||||
|
||||
if (priv->enable_gpio)
|
||||
val |= MT6370_BL_EXT_EN_MASK;
|
||||
|
||||
return regmap_update_bits(priv->regmap, MT6370_REG_BL_EN, mask, val);
|
||||
}
|
||||
|
||||
static int mt6370_check_vendor_info(struct mt6370_priv *priv)
|
||||
{
|
||||
/*
|
||||
* Because MT6372 uses 14 bits to control the brightness,
|
||||
* MT6370 and MT6371 use 11 bits. This function is used
|
||||
* to check the vendor's ID and set the relative hardware
|
||||
* mask, shift and default maximum brightness value that
|
||||
* should be used.
|
||||
*/
|
||||
unsigned int dev_info, hw_vid, of_vid;
|
||||
int ret;
|
||||
|
||||
ret = regmap_read(priv->regmap, MT6370_REG_DEV_INFO, &dev_info);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
of_vid = (uintptr_t)device_get_match_data(priv->dev);
|
||||
hw_vid = FIELD_GET(MT6370_VENID_MASK, dev_info);
|
||||
hw_vid = (hw_vid == 0x9 || hw_vid == 0xb) ? MT6370_VID_6372 : MT6370_VID_COMMON;
|
||||
if (hw_vid != of_vid)
|
||||
return dev_err_probe(priv->dev, -EINVAL,
|
||||
"Buggy DT, wrong compatible string\n");
|
||||
|
||||
if (hw_vid == MT6370_VID_6372) {
|
||||
priv->dim2_mask = MT6370_BL_DIM2_6372_MASK;
|
||||
priv->dim2_shift = MT6370_BL_DIM2_6372_SHIFT;
|
||||
priv->def_max_brightness = MT6370_BL_MAX_6372_BRIGHTNESS;
|
||||
} else {
|
||||
priv->dim2_mask = MT6370_BL_DIM2_COMMON_MASK;
|
||||
priv->dim2_shift = MT6370_BL_DIM2_COMMON_SHIFT;
|
||||
priv->def_max_brightness = MT6370_BL_MAX_COMMON_BRIGHTNESS;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int mt6370_bl_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct backlight_properties props = {
|
||||
.type = BACKLIGHT_RAW,
|
||||
};
|
||||
struct device *dev = &pdev->dev;
|
||||
struct mt6370_priv *priv;
|
||||
int ret;
|
||||
|
||||
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
|
||||
if (!priv)
|
||||
return -ENOMEM;
|
||||
|
||||
priv->dev = dev;
|
||||
|
||||
priv->regmap = dev_get_regmap(dev->parent, NULL);
|
||||
if (!priv->regmap)
|
||||
return dev_err_probe(dev, -ENODEV, "Failed to get regmap\n");
|
||||
|
||||
ret = mt6370_check_vendor_info(priv);
|
||||
if (ret)
|
||||
return dev_err_probe(dev, ret, "Failed to check vendor info\n");
|
||||
|
||||
priv->enable_gpio = devm_gpiod_get_optional(dev, "enable",
|
||||
GPIOD_OUT_HIGH);
|
||||
if (IS_ERR(priv->enable_gpio))
|
||||
return dev_err_probe(dev, PTR_ERR(priv->enable_gpio),
|
||||
"Failed to get 'enable' gpio\n");
|
||||
|
||||
ret = mt6370_init_backlight_properties(priv, &props);
|
||||
if (ret)
|
||||
return dev_err_probe(dev, ret,
|
||||
"Failed to init backlight properties\n");
|
||||
|
||||
priv->bl = devm_backlight_device_register(dev, pdev->name, dev, priv,
|
||||
&mt6370_bl_ops, &props);
|
||||
if (IS_ERR(priv->bl))
|
||||
return dev_err_probe(dev, PTR_ERR(priv->bl),
|
||||
"Failed to register backlight\n");
|
||||
|
||||
backlight_update_status(priv->bl);
|
||||
platform_set_drvdata(pdev, priv);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int mt6370_bl_remove(struct platform_device *pdev)
|
||||
{
|
||||
struct mt6370_priv *priv = platform_get_drvdata(pdev);
|
||||
struct backlight_device *bl_dev = priv->bl;
|
||||
|
||||
bl_dev->props.brightness = 0;
|
||||
backlight_update_status(priv->bl);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct of_device_id mt6370_bl_of_match[] = {
|
||||
{ .compatible = "mediatek,mt6370-backlight", .data = (void *)MT6370_VID_COMMON },
|
||||
{ .compatible = "mediatek,mt6372-backlight", .data = (void *)MT6370_VID_6372 },
|
||||
{}
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, mt6370_bl_of_match);
|
||||
|
||||
static struct platform_driver mt6370_bl_driver = {
|
||||
.driver = {
|
||||
.name = "mt6370-backlight",
|
||||
.of_match_table = mt6370_bl_of_match,
|
||||
},
|
||||
.probe = mt6370_bl_probe,
|
||||
.remove = mt6370_bl_remove,
|
||||
};
|
||||
module_platform_driver(mt6370_bl_driver);
|
||||
|
||||
MODULE_AUTHOR("ChiaEn Wu <chiaen_wu@richtek.com>");
|
||||
MODULE_DESCRIPTION("MediaTek MT6370 Backlight Driver");
|
||||
MODULE_LICENSE("GPL v2");
|
||||
Loading…
Reference in New Issue
Block a user