Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR.

No conflicts.

Adjacent changes:

drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
  35d92abfba ("net: hns3: fix kernel crash when devlink reload during initialization")
  2a1a1a7b5f ("net: hns3: add command queue trace for hns3")

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit is contained in:
Jakub Kicinski 2024-05-09 09:59:29 -07:00
commit e7073830cc
265 changed files with 2921 additions and 1362 deletions

View File

@ -4594,9 +4594,10 @@
norid [S390] ignore the RID field and force use of
one PCI domain per PCI function
pcie_aspm= [PCIE] Forcibly enable or disable PCIe Active State Power
pcie_aspm= [PCIE] Forcibly enable or ignore PCIe Active State Power
Management.
off Disable ASPM.
off Don't touch ASPM configuration at all. Leave any
configuration done by firmware unchanged.
force Enable ASPM even on devices that claim not to support it.
WARNING: Forcing ASPM on may cause system lockups.

View File

@ -42,7 +42,7 @@ allOf:
properties:
compatible:
contains:
const: maxim,max30100
const: maxim,max30102
then:
properties:
maxim,green-led-current-microamp: false

View File

@ -337,8 +337,8 @@ allOf:
minItems: 4
clocks:
minItems: 34
maxItems: 34
minItems: 24
maxItems: 24
clock-names:
items:
@ -351,18 +351,6 @@ allOf:
- const: ethwarp_wocpu1
- const: ethwarp_wocpu0
- const: esw
- const: netsys0
- const: netsys1
- const: sgmii_tx250m
- const: sgmii_rx250m
- const: sgmii2_tx250m
- const: sgmii2_rx250m
- const: top_usxgmii0_sel
- const: top_usxgmii1_sel
- const: top_sgm0_sel
- const: top_sgm1_sel
- const: top_xfi_phy0_xtal_sel
- const: top_xfi_phy1_xtal_sel
- const: top_eth_gmii_sel
- const: top_eth_refck_50m_sel
- const: top_eth_sys_200m_sel
@ -375,16 +363,10 @@ allOf:
- const: top_netsys_sync_250m_sel
- const: top_netsys_ppefb_250m_sel
- const: top_netsys_warp_sel
- const: wocpu1
- const: wocpu0
- const: xgp1
- const: xgp2
- const: xgp3
mediatek,sgmiisys:
minItems: 2
maxItems: 2
patternProperties:
"^mac@[0-1]$":
type: object

View File

@ -20,6 +20,11 @@ Optional properties:
a GPIO spec for the external headphone detect pin. If jd-mode = 0,
we will get the JD status by getting the value of hp-detect-gpios.
- cbj-sleeve-gpios:
a GPIO spec to control the external combo jack circuit to tie the sleeve/ring2
contacts to the ground or floating. It could avoid some electric noise from the
active speaker jacks.
- realtek,in2-differential
Boolean. Indicate MIC2 input are differential, rather than single-ended.
@ -68,6 +73,7 @@ codec: rt5650@1a {
compatible = "realtek,rt5650";
reg = <0x1a>;
hp-detect-gpios = <&gpio 19 0>;
cbj-sleeve-gpios = <&gpio 20 0>;
interrupt-parent = <&gpio>;
interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
realtek,dmic-en = "true";

View File

@ -1576,6 +1576,12 @@ attribute-sets:
-
name: mcast-querier-state
type: binary
-
name: fdb-n-learned
type: u32
-
name: fdb-max-learned
type: u32
-
name: linkinfo-brport-attrs
name-prefix: ifla-brport-

View File

@ -5717,7 +5717,7 @@ Q: http://patchwork.linuxtv.org/project/linux-media/list/
F: drivers/media/dvb-frontends/cxd2820r*
CXGB3 ETHERNET DRIVER (CXGB3)
M: Raju Rangoju <rajur@chelsio.com>
M: Potnuri Bharat Teja <bharat@chelsio.com>
L: netdev@vger.kernel.org
S: Supported
W: http://www.chelsio.com
@ -5738,7 +5738,7 @@ W: http://www.chelsio.com
F: drivers/crypto/chelsio
CXGB4 ETHERNET DRIVER (CXGB4)
M: Raju Rangoju <rajur@chelsio.com>
M: Potnuri Bharat Teja <bharat@chelsio.com>
L: netdev@vger.kernel.org
S: Supported
W: http://www.chelsio.com
@ -5767,7 +5767,7 @@ F: drivers/infiniband/hw/cxgb4/
F: include/uapi/rdma/cxgb4-abi.h
CXGB4VF ETHERNET DRIVER (CXGB4VF)
M: Raju Rangoju <rajur@chelsio.com>
M: Potnuri Bharat Teja <bharat@chelsio.com>
L: netdev@vger.kernel.org
S: Supported
W: http://www.chelsio.com

View File

@ -2,7 +2,7 @@
VERSION = 6
PATCHLEVEL = 9
SUBLEVEL = 0
EXTRAVERSION = -rc6
EXTRAVERSION = -rc7
NAME = Hurr durr I'ma ninja sloth
# *DOCUMENTATION*

View File

@ -127,6 +127,10 @@ cpu_resume_after_mmu:
instr_sync
#endif
bl cpu_init @ restore the und/abt/irq banked regs
#if defined(CONFIG_KASAN) && defined(CONFIG_KASAN_STACK)
mov r0, sp
bl kasan_unpoison_task_stack_below
#endif
mov r0, #0 @ return zero on success
ldmfd sp!, {r4 - r11, pc}
ENDPROC(cpu_resume_after_mmu)

View File

@ -82,7 +82,8 @@
};
&mmc1 {
bt_reset: bt-reset {
bluetooth@2 {
reg = <2>;
compatible = "mediatek,mt7921s-bluetooth";
pinctrl-names = "default";
pinctrl-0 = <&bt_pins_reset>;

View File

@ -367,6 +367,16 @@
};
};
&pmm8155au_1_gpios {
pmm8155au_1_sdc2_cd: sdc2-cd-default-state {
pins = "gpio4";
function = "normal";
input-enable;
bias-pull-up;
power-source = <0>;
};
};
&qupv3_id_1 {
status = "okay";
};
@ -384,10 +394,10 @@
&sdhc_2 {
status = "okay";
cd-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
cd-gpios = <&pmm8155au_1_gpios 4 GPIO_ACTIVE_LOW>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdc2_on>;
pinctrl-1 = <&sdc2_off>;
pinctrl-0 = <&sdc2_on &pmm8155au_1_sdc2_cd>;
pinctrl-1 = <&sdc2_off &pmm8155au_1_sdc2_cd>;
vqmmc-supply = <&vreg_l13c_2p96>; /* IO line power */
vmmc-supply = <&vreg_l17a_2p96>; /* Card power line */
bus-width = <4>;
@ -505,13 +515,6 @@
bias-pull-up; /* pull up */
drive-strength = <16>; /* 16 MA */
};
sd-cd-pins {
pins = "gpio96";
function = "gpio";
bias-pull-up; /* pull up */
drive-strength = <2>; /* 2 MA */
};
};
sdc2_off: sdc2-off-state {
@ -532,13 +535,6 @@
bias-pull-up; /* pull up */
drive-strength = <2>; /* 2 MA */
};
sd-cd-pins {
pins = "gpio96";
function = "gpio";
bias-pull-up; /* pull up */
drive-strength = <2>; /* 2 MA */
};
};
usb2phy_ac_en1_default: usb2phy-ac-en1-default-state {

View File

@ -44,9 +44,8 @@
#define PLPKS_MAX_DATA_SIZE 4000
// Timeouts for PLPKS operations
#define PLPKS_MAX_TIMEOUT 5000 // msec
#define PLPKS_FLUSH_SLEEP 10 // msec
#define PLPKS_FLUSH_SLEEP_RANGE 400
#define PLPKS_MAX_TIMEOUT (5 * USEC_PER_SEC)
#define PLPKS_FLUSH_SLEEP 10000 // usec
struct plpks_var {
char *component;

View File

@ -786,8 +786,16 @@ static void pci_dma_bus_setup_pSeriesLP(struct pci_bus *bus)
* parent bus. During reboot, there will be ibm,dma-window property to
* define DMA window. For kdump, there will at least be default window or DDW
* or both.
* There is an exception to the above. In case the PE goes into frozen
* state, firmware may not provide ibm,dma-window property at the time
* of LPAR boot up.
*/
if (!pdn) {
pr_debug(" no ibm,dma-window property !\n");
return;
}
ppci = PCI_DN(pdn);
pr_debug(" parent is %pOF, iommu_table: 0x%p\n",

View File

@ -415,8 +415,7 @@ static int plpks_confirm_object_flushed(struct label *label,
break;
}
usleep_range(PLPKS_FLUSH_SLEEP,
PLPKS_FLUSH_SLEEP + PLPKS_FLUSH_SLEEP_RANGE);
fsleep(PLPKS_FLUSH_SLEEP);
timeout = timeout + PLPKS_FLUSH_SLEEP;
} while (timeout < PLPKS_MAX_TIMEOUT);
@ -464,9 +463,10 @@ int plpks_signed_update_var(struct plpks_var *var, u64 flags)
continuetoken = retbuf[0];
if (pseries_status_to_err(rc) == -EBUSY) {
int delay_ms = get_longbusy_msecs(rc);
mdelay(delay_ms);
timeout += delay_ms;
int delay_us = get_longbusy_msecs(rc) * 1000;
fsleep(delay_us);
timeout += delay_us;
}
rc = pseries_status_to_err(rc);
} while (rc == -EBUSY && timeout < PLPKS_MAX_TIMEOUT);

View File

@ -125,8 +125,19 @@ struct s390_pxts_ctx {
static inline int __paes_keyblob2pkey(struct key_blob *kb,
struct pkey_protkey *pk)
{
return pkey_keyblob2pkey(kb->key, kb->keylen,
pk->protkey, &pk->len, &pk->type);
int i, ret = -EIO;
/* try three times in case of busy card */
for (i = 0; ret && i < 3; i++) {
if (ret == -EBUSY && in_task()) {
if (msleep_interruptible(1000))
return -EINTR;
}
ret = pkey_keyblob2pkey(kb->key, kb->keylen,
pk->protkey, &pk->len, &pk->type);
}
return ret;
}
static inline int __paes_convert_key(struct s390_paes_ctx *ctx)

View File

@ -9,6 +9,7 @@
#define CFI_DEF_CFA_OFFSET .cfi_def_cfa_offset
#define CFI_ADJUST_CFA_OFFSET .cfi_adjust_cfa_offset
#define CFI_RESTORE .cfi_restore
#define CFI_REL_OFFSET .cfi_rel_offset
#ifdef CONFIG_AS_CFI_VAL_OFFSET
#define CFI_VAL_OFFSET .cfi_val_offset

View File

@ -24,8 +24,10 @@ __kernel_\func:
CFI_DEF_CFA_OFFSET (STACK_FRAME_OVERHEAD + WRAPPER_FRAME_SIZE)
CFI_VAL_OFFSET 15, -STACK_FRAME_OVERHEAD
stg %r14,STACK_FRAME_OVERHEAD(%r15)
CFI_REL_OFFSET 14, STACK_FRAME_OVERHEAD
brasl %r14,__s390_vdso_\func
lg %r14,STACK_FRAME_OVERHEAD(%r15)
CFI_RESTORE 14
aghi %r15,WRAPPER_FRAME_SIZE
CFI_DEF_CFA_OFFSET STACK_FRAME_OVERHEAD
CFI_RESTORE 15

View File

@ -2661,7 +2661,7 @@ static int __s390_enable_skey_hugetlb(pte_t *pte, unsigned long addr,
return 0;
start = pmd_val(*pmd) & HPAGE_MASK;
end = start + HPAGE_SIZE - 1;
end = start + HPAGE_SIZE;
__storage_key_init_range(start, end);
set_bit(PG_arch_1, &page->flags);
cond_resched();

View File

@ -139,7 +139,7 @@ static void clear_huge_pte_skeys(struct mm_struct *mm, unsigned long rste)
}
if (!test_and_set_bit(PG_arch_1, &page->flags))
__storage_key_init_range(paddr, paddr + size - 1);
__storage_key_init_range(paddr, paddr + size);
}
void __set_huge_pte_at(struct mm_struct *mm, unsigned long addr,

View File

@ -98,11 +98,6 @@ static int addr_to_vsyscall_nr(unsigned long addr)
static bool write_ok_or_segv(unsigned long ptr, size_t size)
{
/*
* XXX: if access_ok, get_user, and put_user handled
* sig_on_uaccess_err, this could go away.
*/
if (!access_ok((void __user *)ptr, size)) {
struct thread_struct *thread = &current->thread;
@ -120,10 +115,8 @@ static bool write_ok_or_segv(unsigned long ptr, size_t size)
bool emulate_vsyscall(unsigned long error_code,
struct pt_regs *regs, unsigned long address)
{
struct task_struct *tsk;
unsigned long caller;
int vsyscall_nr, syscall_nr, tmp;
int prev_sig_on_uaccess_err;
long ret;
unsigned long orig_dx;
@ -172,8 +165,6 @@ bool emulate_vsyscall(unsigned long error_code,
goto sigsegv;
}
tsk = current;
/*
* Check for access_ok violations and find the syscall nr.
*
@ -234,12 +225,8 @@ bool emulate_vsyscall(unsigned long error_code,
goto do_ret; /* skip requested */
/*
* With a real vsyscall, page faults cause SIGSEGV. We want to
* preserve that behavior to make writing exploits harder.
* With a real vsyscall, page faults cause SIGSEGV.
*/
prev_sig_on_uaccess_err = current->thread.sig_on_uaccess_err;
current->thread.sig_on_uaccess_err = 1;
ret = -EFAULT;
switch (vsyscall_nr) {
case 0:
@ -262,23 +249,12 @@ bool emulate_vsyscall(unsigned long error_code,
break;
}
current->thread.sig_on_uaccess_err = prev_sig_on_uaccess_err;
check_fault:
if (ret == -EFAULT) {
/* Bad news -- userspace fed a bad pointer to a vsyscall. */
warn_bad_vsyscall(KERN_INFO, regs,
"vsyscall fault (exploit attempt?)");
/*
* If we failed to generate a signal for any reason,
* generate one here. (This should be impossible.)
*/
if (WARN_ON_ONCE(!sigismember(&tsk->pending.signal, SIGBUS) &&
!sigismember(&tsk->pending.signal, SIGSEGV)))
goto sigsegv;
return true; /* Don't emulate the ret. */
goto sigsegv;
}
regs->ax = ret;

View File

@ -17,6 +17,7 @@ extern bool e820__mapped_all(u64 start, u64 end, enum e820_type type);
extern void e820__range_add (u64 start, u64 size, enum e820_type type);
extern u64 e820__range_update(u64 start, u64 size, enum e820_type old_type, enum e820_type new_type);
extern u64 e820__range_remove(u64 start, u64 size, enum e820_type old_type, bool check_type);
extern u64 e820__range_update_table(struct e820_table *t, u64 start, u64 size, enum e820_type old_type, enum e820_type new_type);
extern void e820__print_table(char *who);
extern int e820__update_table(struct e820_table *table);

View File

@ -472,7 +472,6 @@ struct thread_struct {
unsigned long iopl_emul;
unsigned int iopl_warn:1;
unsigned int sig_on_uaccess_err:1;
/*
* Protection Keys Register for Userspace. Loaded immediately on

View File

@ -269,6 +269,7 @@ int rmp_make_private(u64 pfn, u64 gpa, enum pg_level level, u32 asid, bool immut
int rmp_make_shared(u64 pfn, enum pg_level level);
void snp_leak_pages(u64 pfn, unsigned int npages);
void kdump_sev_callback(void);
void snp_fixup_e820_tables(void);
#else
static inline bool snp_probe_rmptable_info(void) { return false; }
static inline int snp_lookup_rmpentry(u64 pfn, bool *assigned, int *level) { return -ENODEV; }
@ -282,6 +283,7 @@ static inline int rmp_make_private(u64 pfn, u64 gpa, enum pg_level level, u32 as
static inline int rmp_make_shared(u64 pfn, enum pg_level level) { return -ENODEV; }
static inline void snp_leak_pages(u64 pfn, unsigned int npages) {}
static inline void kdump_sev_callback(void) { }
static inline void snp_fixup_e820_tables(void) {}
#endif
#endif

View File

@ -1771,7 +1771,7 @@ void x2apic_setup(void)
__x2apic_enable();
}
static __init void apic_set_fixmap(void);
static __init void apic_set_fixmap(bool read_apic);
static __init void x2apic_disable(void)
{
@ -1793,7 +1793,12 @@ static __init void x2apic_disable(void)
}
__x2apic_disable();
apic_set_fixmap();
/*
* Don't reread the APIC ID as it was already done from
* check_x2apic() and the APIC driver still is a x2APIC variant,
* which fails to do the read after x2APIC was disabled.
*/
apic_set_fixmap(false);
}
static __init void x2apic_enable(void)
@ -2057,13 +2062,14 @@ void __init init_apic_mappings(void)
}
}
static __init void apic_set_fixmap(void)
static __init void apic_set_fixmap(bool read_apic)
{
set_fixmap_nocache(FIX_APIC_BASE, mp_lapic_addr);
apic_mmio_base = APIC_BASE;
apic_printk(APIC_VERBOSE, "mapped APIC to %16lx (%16lx)\n",
apic_mmio_base, mp_lapic_addr);
apic_read_boot_cpu_id(false);
if (read_apic)
apic_read_boot_cpu_id(false);
}
void __init register_lapic_address(unsigned long address)
@ -2073,7 +2079,7 @@ void __init register_lapic_address(unsigned long address)
mp_lapic_addr = address;
if (!x2apic_mode)
apic_set_fixmap();
apic_set_fixmap(true);
}
/*

View File

@ -532,9 +532,10 @@ u64 __init e820__range_update(u64 start, u64 size, enum e820_type old_type, enum
return __e820__range_update(e820_table, start, size, old_type, new_type);
}
static u64 __init e820__range_update_kexec(u64 start, u64 size, enum e820_type old_type, enum e820_type new_type)
u64 __init e820__range_update_table(struct e820_table *t, u64 start, u64 size,
enum e820_type old_type, enum e820_type new_type)
{
return __e820__range_update(e820_table_kexec, start, size, old_type, new_type);
return __e820__range_update(t, start, size, old_type, new_type);
}
/* Remove a range of memory from the E820 table: */
@ -806,7 +807,7 @@ u64 __init e820__memblock_alloc_reserved(u64 size, u64 align)
addr = memblock_phys_alloc(size, align);
if (addr) {
e820__range_update_kexec(addr, size, E820_TYPE_RAM, E820_TYPE_RESERVED);
e820__range_update_table(e820_table_kexec, addr, size, E820_TYPE_RAM, E820_TYPE_RESERVED);
pr_info("update e820_table_kexec for e820__memblock_alloc_reserved()\n");
e820__update_table_kexec();
}

View File

@ -723,39 +723,8 @@ kernelmode_fixup_or_oops(struct pt_regs *regs, unsigned long error_code,
WARN_ON_ONCE(user_mode(regs));
/* Are we prepared to handle this kernel fault? */
if (fixup_exception(regs, X86_TRAP_PF, error_code, address)) {
/*
* Any interrupt that takes a fault gets the fixup. This makes
* the below recursive fault logic only apply to a faults from
* task context.
*/
if (in_interrupt())
return;
/*
* Per the above we're !in_interrupt(), aka. task context.
*
* In this case we need to make sure we're not recursively
* faulting through the emulate_vsyscall() logic.
*/
if (current->thread.sig_on_uaccess_err && signal) {
sanitize_error_code(address, &error_code);
set_signal_archinfo(address, error_code);
if (si_code == SEGV_PKUERR) {
force_sig_pkuerr((void __user *)address, pkey);
} else {
/* XXX: hwpoison faults will set the wrong code. */
force_sig_fault(signal, si_code, (void __user *)address);
}
}
/*
* Barring that, we can do the fixup and be happy.
*/
if (fixup_exception(regs, X86_TRAP_PF, error_code, address))
return;
}
/*
* AMD erratum #91 manifests as a spurious page fault on a PREFETCH

View File

@ -102,6 +102,13 @@ void __init mem_encrypt_setup_arch(void)
phys_addr_t total_mem = memblock_phys_mem_size();
unsigned long size;
/*
* Do RMP table fixups after the e820 tables have been setup by
* e820__memory_setup().
*/
if (cc_platform_has(CC_ATTR_HOST_SEV_SNP))
snp_fixup_e820_tables();
if (!cc_platform_has(CC_ATTR_GUEST_MEM_ENCRYPT))
return;

View File

@ -163,6 +163,42 @@ bool snp_probe_rmptable_info(void)
return true;
}
static void __init __snp_fixup_e820_tables(u64 pa)
{
if (IS_ALIGNED(pa, PMD_SIZE))
return;
/*
* Handle cases where the RMP table placement by the BIOS is not
* 2M aligned and the kexec kernel could try to allocate
* from within that chunk which then causes a fatal RMP fault.
*
* The e820_table needs to be updated as it is converted to
* kernel memory resources and used by KEXEC_FILE_LOAD syscall
* to load kexec segments.
*
* The e820_table_firmware needs to be updated as it is exposed
* to sysfs and used by the KEXEC_LOAD syscall to load kexec
* segments.
*
* The e820_table_kexec needs to be updated as it passed to
* the kexec-ed kernel.
*/
pa = ALIGN_DOWN(pa, PMD_SIZE);
if (e820__mapped_any(pa, pa + PMD_SIZE, E820_TYPE_RAM)) {
pr_info("Reserving start/end of RMP table on a 2MB boundary [0x%016llx]\n", pa);
e820__range_update(pa, PMD_SIZE, E820_TYPE_RAM, E820_TYPE_RESERVED);
e820__range_update_table(e820_table_kexec, pa, PMD_SIZE, E820_TYPE_RAM, E820_TYPE_RESERVED);
e820__range_update_table(e820_table_firmware, pa, PMD_SIZE, E820_TYPE_RAM, E820_TYPE_RESERVED);
}
}
void __init snp_fixup_e820_tables(void)
{
__snp_fixup_e820_tables(probed_rmp_base);
__snp_fixup_e820_tables(probed_rmp_base + probed_rmp_size);
}
/*
* Do the necessary preparations which are verified by the firmware as
* described in the SNP_INIT_EX firmware command description in the SNP

View File

@ -219,13 +219,21 @@ static __read_mostly unsigned int cpuid_leaf5_edx_val;
static void xen_cpuid(unsigned int *ax, unsigned int *bx,
unsigned int *cx, unsigned int *dx)
{
unsigned maskebx = ~0;
unsigned int maskebx = ~0;
unsigned int or_ebx = 0;
/*
* Mask out inconvenient features, to try and disable as many
* unsupported kernel subsystems as possible.
*/
switch (*ax) {
case 0x1:
/* Replace initial APIC ID in bits 24-31 of EBX. */
/* See xen_pv_smp_config() for related topology preparations. */
maskebx = 0x00ffffff;
or_ebx = smp_processor_id() << 24;
break;
case CPUID_MWAIT_LEAF:
/* Synthesize the values.. */
*ax = 0;
@ -248,6 +256,7 @@ static void xen_cpuid(unsigned int *ax, unsigned int *bx,
: "0" (*ax), "2" (*cx));
*bx &= maskebx;
*bx |= or_ebx;
}
static bool __init xen_check_mwait(void)

View File

@ -154,9 +154,9 @@ static void __init xen_pv_smp_config(void)
u32 apicid = 0;
int i;
topology_register_boot_apic(apicid++);
topology_register_boot_apic(apicid);
for (i = 1; i < nr_cpu_ids; i++)
for (i = 0; i < nr_cpu_ids; i++)
topology_register_apic(apicid++, CPU_ACPIID_INVALID, true);
/* Pretend to be a proper enumerated system */

View File

@ -100,6 +100,10 @@ void flush_cache_range(struct vm_area_struct*, ulong, ulong);
void flush_icache_range(unsigned long start, unsigned long end);
void flush_cache_page(struct vm_area_struct*,
unsigned long, unsigned long);
#define flush_cache_all flush_cache_all
#define flush_cache_range flush_cache_range
#define flush_icache_range flush_icache_range
#define flush_cache_page flush_cache_page
#else
#define flush_cache_all local_flush_cache_all
#define flush_cache_range local_flush_cache_range
@ -136,20 +140,7 @@ void local_flush_cache_page(struct vm_area_struct *vma,
#else
#define flush_cache_all() do { } while (0)
#define flush_cache_mm(mm) do { } while (0)
#define flush_cache_dup_mm(mm) do { } while (0)
#define flush_cache_vmap(start,end) do { } while (0)
#define flush_cache_vmap_early(start,end) do { } while (0)
#define flush_cache_vunmap(start,end) do { } while (0)
#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0
#define flush_dcache_page(page) do { } while (0)
#define flush_icache_range local_flush_icache_range
#define flush_cache_page(vma, addr, pfn) do { } while (0)
#define flush_cache_range(vma, start, end) do { } while (0)
#endif
@ -162,15 +153,14 @@ void local_flush_cache_page(struct vm_area_struct *vma,
__invalidate_icache_range(start,(end) - (start)); \
} while (0)
#define flush_dcache_mmap_lock(mapping) do { } while (0)
#define flush_dcache_mmap_unlock(mapping) do { } while (0)
#if defined(CONFIG_MMU) && (DCACHE_WAY_SIZE > PAGE_SIZE)
extern void copy_to_user_page(struct vm_area_struct*, struct page*,
unsigned long, void*, const void*, unsigned long);
extern void copy_from_user_page(struct vm_area_struct*, struct page*,
unsigned long, void*, const void*, unsigned long);
#define copy_to_user_page copy_to_user_page
#define copy_from_user_page copy_from_user_page
#else
@ -186,4 +176,6 @@ extern void copy_from_user_page(struct vm_area_struct*, struct page*,
#endif
#include <asm-generic/cacheflush.h>
#endif /* _XTENSA_CACHEFLUSH_H */

View File

@ -115,9 +115,9 @@
#define MAKE_RA_FOR_CALL(ra,ws) (((ra) & 0x3fffffff) | (ws) << 30)
/* Convert return address to a valid pc
* Note: We assume that the stack pointer is in the same 1GB ranges as the ra
* Note: 'text' is the address within the same 1GB range as the ra
*/
#define MAKE_PC_FROM_RA(ra,sp) (((ra) & 0x3fffffff) | ((sp) & 0xc0000000))
#define MAKE_PC_FROM_RA(ra, text) (((ra) & 0x3fffffff) | ((unsigned long)(text) & 0xc0000000))
#elif defined(__XTENSA_CALL0_ABI__)
@ -127,9 +127,9 @@
#define MAKE_RA_FOR_CALL(ra, ws) (ra)
/* Convert return address to a valid pc
* Note: We assume that the stack pointer is in the same 1GB ranges as the ra
* Note: 'text' is not used as 'ra' is always the full address
*/
#define MAKE_PC_FROM_RA(ra, sp) (ra)
#define MAKE_PC_FROM_RA(ra, text) (ra)
#else
#error Unsupported Xtensa ABI

View File

@ -87,7 +87,7 @@ struct pt_regs {
# define user_mode(regs) (((regs)->ps & 0x00000020)!=0)
# define instruction_pointer(regs) ((regs)->pc)
# define return_pointer(regs) (MAKE_PC_FROM_RA((regs)->areg[0], \
(regs)->areg[1]))
(regs)->pc))
# ifndef CONFIG_SMP
# define profile_pc(regs) instruction_pointer(regs)

View File

@ -47,6 +47,7 @@
#include <asm/asm-offsets.h>
#include <asm/regs.h>
#include <asm/hw_breakpoint.h>
#include <asm/sections.h>
#include <asm/traps.h>
extern void ret_from_fork(void);
@ -380,7 +381,7 @@ unsigned long __get_wchan(struct task_struct *p)
int count = 0;
sp = p->thread.sp;
pc = MAKE_PC_FROM_RA(p->thread.ra, p->thread.sp);
pc = MAKE_PC_FROM_RA(p->thread.ra, _text);
do {
if (sp < stack_page + sizeof(struct task_struct) ||
@ -392,7 +393,7 @@ unsigned long __get_wchan(struct task_struct *p)
/* Stack layout: sp-4: ra, sp-3: sp' */
pc = MAKE_PC_FROM_RA(SPILL_SLOT(sp, 0), sp);
pc = MAKE_PC_FROM_RA(SPILL_SLOT(sp, 0), _text);
sp = SPILL_SLOT(sp, 1);
} while (count++ < 16);
return 0;

View File

@ -13,6 +13,7 @@
#include <linux/stacktrace.h>
#include <asm/ftrace.h>
#include <asm/sections.h>
#include <asm/stacktrace.h>
#include <asm/traps.h>
#include <linux/uaccess.h>
@ -189,7 +190,7 @@ void walk_stackframe(unsigned long *sp,
if (a1 <= (unsigned long)sp)
break;
frame.pc = MAKE_PC_FROM_RA(a0, a1);
frame.pc = MAKE_PC_FROM_RA(a0, _text);
frame.sp = a1;
if (fn(&frame, data))

View File

@ -166,10 +166,8 @@ late_initcall(rs_init);
static void iss_console_write(struct console *co, const char *s, unsigned count)
{
if (s && *s != 0) {
int len = strlen(s);
simc_write(1, s, count < len ? count : len);
}
if (s && *s != 0)
simc_write(1, s, min(count, strlen(s)));
}
static struct tty_driver* iss_console_device(struct console *c, int *index)

View File

@ -16,6 +16,9 @@ menuconfig AUXDISPLAY
if AUXDISPLAY
#
# Character LCD section
#
config CHARLCD
tristate "Character LCD core support" if COMPILE_TEST
help
@ -25,12 +28,6 @@ config CHARLCD
This is some character LCD core interface that multiple drivers can
use.
config LINEDISP
tristate "Character line display core support" if COMPILE_TEST
help
This is the core support for single-line character displays, to be
selected by drivers that use it.
config HD44780_COMMON
tristate "Common functions for HD44780 (and compatibles) LCD displays" if COMPILE_TEST
select CHARLCD
@ -52,145 +49,6 @@ config HD44780
kernel and started at boot.
If you don't understand what all this is about, say N.
config KS0108
tristate "KS0108 LCD Controller"
depends on PARPORT_PC
default n
help
If you have a LCD controlled by one or more KS0108
controllers, say Y. You will need also another more specific
driver for your LCD.
Depends on Parallel Port support. If you say Y at
parport, you will be able to compile this as a module (M)
and built-in as well (Y).
To compile this as a module, choose M here:
the module will be called ks0108.
If unsure, say N.
config KS0108_PORT
hex "Parallel port where the LCD is connected"
depends on KS0108
default 0x378
help
The address of the parallel port where the LCD is connected.
The first standard parallel port address is 0x378.
The second standard parallel port address is 0x278.
The third standard parallel port address is 0x3BC.
You can specify a different address if you need.
If you don't know what I'm talking about, load the parport module,
and execute "dmesg" or "cat /proc/ioports". You can see there how
many parallel ports are present and which address each one has.
Usually you only need to use 0x378.
If you compile this as a module, you can still override this
using the module parameters.
config KS0108_DELAY
int "Delay between each control writing (microseconds)"
depends on KS0108
default "2"
help
Amount of time the ks0108 should wait between each control write
to the parallel port.
If your LCD seems to miss random writings, increment this.
If you don't know what I'm talking about, ignore it.
If you compile this as a module, you can still override this
value using the module parameters.
config CFAG12864B
tristate "CFAG12864B LCD"
depends on X86
depends on FB
depends on KS0108
select FB_SYSMEM_HELPERS
default n
help
If you have a Crystalfontz 128x64 2-color LCD, cfag12864b Series,
say Y. You also need the ks0108 LCD Controller driver.
For help about how to wire your LCD to the parallel port,
check Documentation/admin-guide/auxdisplay/cfag12864b.rst
Depends on the x86 arch and the framebuffer support.
The LCD framebuffer driver can be attached to a console.
It will work fine. However, you can't attach it to the fbdev driver
of the xorg server.
To compile this as a module, choose M here:
the modules will be called cfag12864b and cfag12864bfb.
If unsure, say N.
config CFAG12864B_RATE
int "Refresh rate (hertz)"
depends on CFAG12864B
default "20"
help
Refresh rate of the LCD.
As the LCD is not memory mapped, the driver has to make the work by
software. This means you should be careful setting this value higher.
If your CPUs are really slow or you feel the system is slowed down,
decrease the value.
Be careful modifying this value to a very high value:
You can freeze the computer, or the LCD maybe can't draw as fast as you
are requesting.
If you don't know what I'm talking about, ignore it.
If you compile this as a module, you can still override this
value using the module parameters.
config IMG_ASCII_LCD
tristate "Imagination Technologies ASCII LCD Display"
depends on HAS_IOMEM
default y if MIPS_MALTA
select MFD_SYSCON
select LINEDISP
help
Enable this to support the simple ASCII LCD displays found on
development boards such as the MIPS Boston, MIPS Malta & MIPS SEAD3
from Imagination Technologies.
config HT16K33
tristate "Holtek Ht16K33 LED controller with keyscan"
depends on FB && I2C && INPUT
select FB_SYSMEM_HELPERS
select INPUT_MATRIXKMAP
select FB_BACKLIGHT
select NEW_LEDS
select LEDS_CLASS
select LINEDISP
help
Say yes here to add support for Holtek HT16K33, RAM mapping 16*8
LED controller driver with keyscan.
config MAX6959
tristate "Maxim MAX6958/6959 7-segment LED controller"
depends on I2C
select REGMAP_I2C
select LINEDISP
help
If you say yes here you get support for the following Maxim chips
(I2C 7-segment LED display controller):
- MAX6958
- MAX6959 (input support)
This driver can also be built as a module. If so, the module
will be called max6959.
config LCD2S
tristate "lcd2s 20x4 character display over I2C console"
depends on I2C
@ -201,27 +59,6 @@ config LCD2S
is a simple single color character display. You have to connect it
to an I2C bus.
config ARM_CHARLCD
bool "ARM Ltd. Character LCD Driver"
depends on PLAT_VERSATILE
help
This is a driver for the character LCD found on the ARM Ltd.
Versatile and RealView Platform Baseboards. It doesn't do
very much more than display the text "ARM Linux" on the first
line and the Linux version on the second line, but that's
still useful.
config SEG_LED_GPIO
tristate "Generic 7-segment LED display"
depends on GPIOLIB || COMPILE_TEST
select LINEDISP
help
This driver supports a generic 7-segment LED display made up
of GPIO pins connected to the individual segments.
This driver can also be built as a module. If so, the module
will be called seg-led-gpio.
menuconfig PARPORT_PANEL
tristate "Parallel port LCD/Keypad Panel support"
depends on PARPORT
@ -480,7 +317,6 @@ endif # PARPORT_PANEL
config PANEL_CHANGE_MESSAGE
bool "Change LCD initialization message ?"
depends on CHARLCD
default "n"
help
This allows you to replace the boot message indicating the kernel version
and the driver version with a custom message. This is useful on appliances
@ -529,8 +365,184 @@ choice
endchoice
#
# Samsung KS0108 LCD controller section
#
config KS0108
tristate "KS0108 LCD Controller"
depends on PARPORT_PC
help
If you have a LCD controlled by one or more KS0108
controllers, say Y. You will need also another more specific
driver for your LCD.
Depends on Parallel Port support. If you say Y at
parport, you will be able to compile this as a module (M)
and built-in as well (Y).
To compile this as a module, choose M here:
the module will be called ks0108.
If unsure, say N.
config KS0108_PORT
hex "Parallel port where the LCD is connected"
depends on KS0108
default 0x378
help
The address of the parallel port where the LCD is connected.
The first standard parallel port address is 0x378.
The second standard parallel port address is 0x278.
The third standard parallel port address is 0x3BC.
You can specify a different address if you need.
If you don't know what I'm talking about, load the parport module,
and execute "dmesg" or "cat /proc/ioports". You can see there how
many parallel ports are present and which address each one has.
Usually you only need to use 0x378.
If you compile this as a module, you can still override this
using the module parameters.
config KS0108_DELAY
int "Delay between each control writing (microseconds)"
depends on KS0108
default "2"
help
Amount of time the ks0108 should wait between each control write
to the parallel port.
If your LCD seems to miss random writings, increment this.
If you don't know what I'm talking about, ignore it.
If you compile this as a module, you can still override this
value using the module parameters.
config CFAG12864B
tristate "CFAG12864B LCD"
depends on X86
depends on FB
depends on KS0108
select FB_SYSMEM_HELPERS
help
If you have a Crystalfontz 128x64 2-color LCD, cfag12864b Series,
say Y. You also need the ks0108 LCD Controller driver.
For help about how to wire your LCD to the parallel port,
check Documentation/admin-guide/auxdisplay/cfag12864b.rst
Depends on the x86 arch and the framebuffer support.
The LCD framebuffer driver can be attached to a console.
It will work fine. However, you can't attach it to the fbdev driver
of the xorg server.
To compile this as a module, choose M here:
the modules will be called cfag12864b and cfag12864bfb.
If unsure, say N.
config CFAG12864B_RATE
int "Refresh rate (hertz)"
depends on CFAG12864B
default "20"
help
Refresh rate of the LCD.
As the LCD is not memory mapped, the driver has to make the work by
software. This means you should be careful setting this value higher.
If your CPUs are really slow or you feel the system is slowed down,
decrease the value.
Be careful modifying this value to a very high value:
You can freeze the computer, or the LCD maybe can't draw as fast as you
are requesting.
If you don't know what I'm talking about, ignore it.
If you compile this as a module, you can still override this
value using the module parameters.
#
# Single character line display section
#
config LINEDISP
tristate "Character line display core support" if COMPILE_TEST
help
This is the core support for single-line character displays, to be
selected by drivers that use it.
config IMG_ASCII_LCD
tristate "Imagination Technologies ASCII LCD Display"
depends on HAS_IOMEM
default y if MIPS_MALTA
select MFD_SYSCON
select LINEDISP
help
Enable this to support the simple ASCII LCD displays found on
development boards such as the MIPS Boston, MIPS Malta & MIPS SEAD3
from Imagination Technologies.
config HT16K33
tristate "Holtek Ht16K33 LED controller with keyscan"
depends on FB && I2C && INPUT
select FB_SYSMEM_HELPERS
select INPUT_MATRIXKMAP
select FB_BACKLIGHT
select NEW_LEDS
select LEDS_CLASS
select LINEDISP
help
Say yes here to add support for Holtek HT16K33, RAM mapping 16*8
LED controller driver with keyscan.
config MAX6959
tristate "Maxim MAX6958/6959 7-segment LED controller"
depends on I2C
select REGMAP_I2C
select LINEDISP
help
If you say yes here you get support for the following Maxim chips
(I2C 7-segment LED display controller):
- MAX6958
- MAX6959 (input support)
This driver can also be built as a module. If so, the module
will be called max6959.
config SEG_LED_GPIO
tristate "Generic 7-segment LED display"
depends on GPIOLIB || COMPILE_TEST
select LINEDISP
help
This driver supports a generic 7-segment LED display made up
of GPIO pins connected to the individual segments.
This driver can also be built as a module. If so, the module
will be called seg-led-gpio.
#
# Character LCD with non-conforming interface section
#
config ARM_CHARLCD
bool "ARM Ltd. Character LCD Driver"
depends on PLAT_VERSATILE
help
This is a driver for the character LCD found on the ARM Ltd.
Versatile and RealView Platform Baseboards. It doesn't do
very much more than display the text "ARM Linux" on the first
line and the Linux version on the second line, but that's
still useful.
endif # AUXDISPLAY
#
# Deprecated options
#
config PANEL
tristate "Parallel port LCD/Keypad Panel support (OLD OPTION)"
depends on PARPORT

View File

@ -3,16 +3,16 @@
# Makefile for the kernel auxiliary displays device drivers.
#
obj-$(CONFIG_ARM_CHARLCD) += arm-charlcd.o
obj-$(CONFIG_CFAG12864B) += cfag12864b.o cfag12864bfb.o
obj-$(CONFIG_CHARLCD) += charlcd.o
obj-$(CONFIG_HD44780_COMMON) += hd44780_common.o
obj-$(CONFIG_ARM_CHARLCD) += arm-charlcd.o
obj-$(CONFIG_KS0108) += ks0108.o
obj-$(CONFIG_CFAG12864B) += cfag12864b.o cfag12864bfb.o
obj-$(CONFIG_IMG_ASCII_LCD) += img-ascii-lcd.o
obj-$(CONFIG_HD44780) += hd44780.o
obj-$(CONFIG_HT16K33) += ht16k33.o
obj-$(CONFIG_PARPORT_PANEL) += panel.o
obj-$(CONFIG_IMG_ASCII_LCD) += img-ascii-lcd.o
obj-$(CONFIG_KS0108) += ks0108.o
obj-$(CONFIG_LCD2S) += lcd2s.o
obj-$(CONFIG_LINEDISP) += line-display.o
obj-$(CONFIG_MAX6959) += max6959.o
obj-$(CONFIG_PARPORT_PANEL) += panel.o
obj-$(CONFIG_SEG_LED_GPIO) += seg-led-gpio.o

View File

@ -17,7 +17,9 @@
#include <linux/uaccess.h>
#include <linux/workqueue.h>
#ifndef CONFIG_PANEL_BOOT_MESSAGE
#include <generated/utsrelease.h>
#endif
#include "charlcd.h"
@ -678,4 +680,5 @@ int charlcd_unregister(struct charlcd *lcd)
}
EXPORT_SYMBOL_GPL(charlcd_unregister);
MODULE_DESCRIPTION("Character LCD core support");
MODULE_LICENSE("GPL");

View File

@ -81,14 +81,12 @@ static int seg_led_probe(struct platform_device *pdev)
return linedisp_register(&priv->linedisp, dev, 1, &seg_led_linedisp_ops);
}
static int seg_led_remove(struct platform_device *pdev)
static void seg_led_remove(struct platform_device *pdev)
{
struct seg_led_priv *priv = platform_get_drvdata(pdev);
cancel_delayed_work_sync(&priv->work);
linedisp_unregister(&priv->linedisp);
return 0;
}
static const struct of_device_id seg_led_of_match[] = {
@ -99,7 +97,7 @@ MODULE_DEVICE_TABLE(of, seg_led_of_match);
static struct platform_driver seg_led_driver = {
.probe = seg_led_probe,
.remove = seg_led_remove,
.remove_new = seg_led_remove,
.driver = {
.name = "seg-led-gpio",
.of_match_table = seg_led_of_match,

View File

@ -2838,6 +2838,43 @@ int regmap_read(struct regmap *map, unsigned int reg, unsigned int *val)
}
EXPORT_SYMBOL_GPL(regmap_read);
/**
* regmap_read_bypassed() - Read a value from a single register direct
* from the device, bypassing the cache
*
* @map: Register map to read from
* @reg: Register to be read from
* @val: Pointer to store read value
*
* A value of zero will be returned on success, a negative errno will
* be returned in error cases.
*/
int regmap_read_bypassed(struct regmap *map, unsigned int reg, unsigned int *val)
{
int ret;
bool bypass, cache_only;
if (!IS_ALIGNED(reg, map->reg_stride))
return -EINVAL;
map->lock(map->lock_arg);
bypass = map->cache_bypass;
cache_only = map->cache_only;
map->cache_bypass = true;
map->cache_only = false;
ret = _regmap_read(map, reg, val);
map->cache_bypass = bypass;
map->cache_only = cache_only;
map->unlock(map->lock_arg);
return ret;
}
EXPORT_SYMBOL_GPL(regmap_read_bypassed);
/**
* regmap_raw_read() - Read raw data from the device
*

View File

@ -2177,7 +2177,8 @@ static int ublk_ctrl_start_dev(struct ublk_device *ub, struct io_uring_cmd *cmd)
.max_hw_sectors = p->max_sectors,
.chunk_sectors = p->chunk_sectors,
.virt_boundary_mask = p->virt_boundary_mask,
.max_segments = USHRT_MAX,
.max_segment_size = UINT_MAX,
};
struct gendisk *disk;
int ret = -EINVAL;

View File

@ -15,8 +15,6 @@
#define VERSION "0.1"
#define QCA_BDADDR_DEFAULT (&(bdaddr_t) {{ 0xad, 0x5a, 0x00, 0x00, 0x00, 0x00 }})
int qca_read_soc_version(struct hci_dev *hdev, struct qca_btsoc_version *ver,
enum qca_btsoc_type soc_type)
{
@ -101,7 +99,8 @@ static int qca_read_fw_build_info(struct hci_dev *hdev)
{
struct sk_buff *skb;
struct edl_event_hdr *edl;
char cmd, build_label[QCA_FW_BUILD_VER_LEN];
char *build_label;
char cmd;
int build_lbl_len, err = 0;
bt_dev_dbg(hdev, "QCA read fw build info");
@ -116,6 +115,11 @@ static int qca_read_fw_build_info(struct hci_dev *hdev)
return err;
}
if (skb->len < sizeof(*edl)) {
err = -EILSEQ;
goto out;
}
edl = (struct edl_event_hdr *)(skb->data);
if (!edl) {
bt_dev_err(hdev, "QCA read fw build info with no header");
@ -131,14 +135,25 @@ static int qca_read_fw_build_info(struct hci_dev *hdev)
goto out;
}
build_lbl_len = edl->data[0];
if (build_lbl_len <= QCA_FW_BUILD_VER_LEN - 1) {
memcpy(build_label, edl->data + 1, build_lbl_len);
*(build_label + build_lbl_len) = '\0';
if (skb->len < sizeof(*edl) + 1) {
err = -EILSEQ;
goto out;
}
build_lbl_len = edl->data[0];
if (skb->len < sizeof(*edl) + 1 + build_lbl_len) {
err = -EILSEQ;
goto out;
}
build_label = kstrndup(&edl->data[1], build_lbl_len, GFP_KERNEL);
if (!build_label)
goto out;
hci_set_fw_info(hdev, "%s", build_label);
kfree(build_label);
out:
kfree_skb(skb);
return err;
@ -237,6 +252,11 @@ static int qca_read_fw_board_id(struct hci_dev *hdev, u16 *bid)
goto out;
}
if (skb->len < 3) {
err = -EILSEQ;
goto out;
}
*bid = (edl->data[1] << 8) + edl->data[2];
bt_dev_dbg(hdev, "%s: bid = %x", __func__, *bid);
@ -267,9 +287,10 @@ int qca_send_pre_shutdown_cmd(struct hci_dev *hdev)
}
EXPORT_SYMBOL_GPL(qca_send_pre_shutdown_cmd);
static void qca_tlv_check_data(struct hci_dev *hdev,
static int qca_tlv_check_data(struct hci_dev *hdev,
struct qca_fw_config *config,
u8 *fw_data, enum qca_btsoc_type soc_type)
u8 *fw_data, size_t fw_size,
enum qca_btsoc_type soc_type)
{
const u8 *data;
u32 type_len;
@ -279,12 +300,16 @@ static void qca_tlv_check_data(struct hci_dev *hdev,
struct tlv_type_patch *tlv_patch;
struct tlv_type_nvm *tlv_nvm;
uint8_t nvm_baud_rate = config->user_baud_rate;
u8 type;
config->dnld_mode = QCA_SKIP_EVT_NONE;
config->dnld_type = QCA_SKIP_EVT_NONE;
switch (config->type) {
case ELF_TYPE_PATCH:
if (fw_size < 7)
return -EINVAL;
config->dnld_mode = QCA_SKIP_EVT_VSE_CC;
config->dnld_type = QCA_SKIP_EVT_VSE_CC;
@ -293,6 +318,9 @@ static void qca_tlv_check_data(struct hci_dev *hdev,
bt_dev_dbg(hdev, "File version : 0x%x", fw_data[6]);
break;
case TLV_TYPE_PATCH:
if (fw_size < sizeof(struct tlv_type_hdr) + sizeof(struct tlv_type_patch))
return -EINVAL;
tlv = (struct tlv_type_hdr *)fw_data;
type_len = le32_to_cpu(tlv->type_len);
tlv_patch = (struct tlv_type_patch *)tlv->data;
@ -332,25 +360,64 @@ static void qca_tlv_check_data(struct hci_dev *hdev,
break;
case TLV_TYPE_NVM:
if (fw_size < sizeof(struct tlv_type_hdr))
return -EINVAL;
tlv = (struct tlv_type_hdr *)fw_data;
type_len = le32_to_cpu(tlv->type_len);
length = (type_len >> 8) & 0x00ffffff;
length = type_len >> 8;
type = type_len & 0xff;
BT_DBG("TLV Type\t\t : 0x%x", type_len & 0x000000ff);
/* Some NVM files have more than one set of tags, only parse
* the first set when it has type 2 for now. When there is
* more than one set there is an enclosing header of type 4.
*/
if (type == 4) {
if (fw_size < 2 * sizeof(struct tlv_type_hdr))
return -EINVAL;
tlv++;
type_len = le32_to_cpu(tlv->type_len);
length = type_len >> 8;
type = type_len & 0xff;
}
BT_DBG("TLV Type\t\t : 0x%x", type);
BT_DBG("Length\t\t : %d bytes", length);
if (type != 2)
break;
if (fw_size < length + (tlv->data - fw_data))
return -EINVAL;
idx = 0;
data = tlv->data;
while (idx < length) {
while (idx < length - sizeof(struct tlv_type_nvm)) {
tlv_nvm = (struct tlv_type_nvm *)(data + idx);
tag_id = le16_to_cpu(tlv_nvm->tag_id);
tag_len = le16_to_cpu(tlv_nvm->tag_len);
if (length < idx + sizeof(struct tlv_type_nvm) + tag_len)
return -EINVAL;
/* Update NVM tags as needed */
switch (tag_id) {
case EDL_TAG_ID_BD_ADDR:
if (tag_len != sizeof(bdaddr_t))
return -EINVAL;
memcpy(&config->bdaddr, tlv_nvm->data, sizeof(bdaddr_t));
break;
case EDL_TAG_ID_HCI:
if (tag_len < 3)
return -EINVAL;
/* HCI transport layer parameters
* enabling software inband sleep
* onto controller side.
@ -366,6 +433,9 @@ static void qca_tlv_check_data(struct hci_dev *hdev,
break;
case EDL_TAG_ID_DEEP_SLEEP:
if (tag_len < 1)
return -EINVAL;
/* Sleep enable mask
* enabling deep sleep feature on controller.
*/
@ -374,14 +444,16 @@ static void qca_tlv_check_data(struct hci_dev *hdev,
break;
}
idx += (sizeof(u16) + sizeof(u16) + 8 + tag_len);
idx += sizeof(struct tlv_type_nvm) + tag_len;
}
break;
default:
BT_ERR("Unknown TLV type %d", config->type);
break;
return -EINVAL;
}
return 0;
}
static int qca_tlv_send_segment(struct hci_dev *hdev, int seg_size,
@ -531,7 +603,9 @@ static int qca_download_firmware(struct hci_dev *hdev,
memcpy(data, fw->data, size);
release_firmware(fw);
qca_tlv_check_data(hdev, config, data, soc_type);
ret = qca_tlv_check_data(hdev, config, data, size, soc_type);
if (ret)
goto out;
segment = data;
remain = size;
@ -614,7 +688,7 @@ int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr)
}
EXPORT_SYMBOL_GPL(qca_set_bdaddr_rome);
static int qca_check_bdaddr(struct hci_dev *hdev)
static int qca_check_bdaddr(struct hci_dev *hdev, const struct qca_fw_config *config)
{
struct hci_rp_read_bd_addr *bda;
struct sk_buff *skb;
@ -638,7 +712,7 @@ static int qca_check_bdaddr(struct hci_dev *hdev)
}
bda = (struct hci_rp_read_bd_addr *)skb->data;
if (!bacmp(&bda->bdaddr, QCA_BDADDR_DEFAULT))
if (!bacmp(&bda->bdaddr, &config->bdaddr))
set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks);
kfree_skb(skb);
@ -667,7 +741,7 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
enum qca_btsoc_type soc_type, struct qca_btsoc_version ver,
const char *firmware_name)
{
struct qca_fw_config config;
struct qca_fw_config config = {};
int err;
u8 rom_ver = 0;
u32 soc_ver;
@ -852,7 +926,7 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
break;
}
err = qca_check_bdaddr(hdev);
err = qca_check_bdaddr(hdev, &config);
if (err)
return err;

View File

@ -29,6 +29,7 @@
#define EDL_PATCH_CONFIG_RES_EVT (0x00)
#define QCA_DISABLE_LOGGING_SUB_OP (0x14)
#define EDL_TAG_ID_BD_ADDR 2
#define EDL_TAG_ID_HCI (17)
#define EDL_TAG_ID_DEEP_SLEEP (27)
@ -47,7 +48,6 @@
#define get_soc_ver(soc_id, rom_ver) \
((le32_to_cpu(soc_id) << 16) | (le16_to_cpu(rom_ver)))
#define QCA_FW_BUILD_VER_LEN 255
#define QCA_HSP_GF_SOC_ID 0x1200
#define QCA_HSP_GF_SOC_MASK 0x0000ff00
@ -94,6 +94,7 @@ struct qca_fw_config {
uint8_t user_baud_rate;
enum qca_tlv_dnld_mode dnld_mode;
enum qca_tlv_dnld_mode dnld_type;
bdaddr_t bdaddr;
};
struct edl_event_hdr {

View File

@ -290,7 +290,7 @@ static int __init sifive_ccache_init(void)
struct device_node *np;
struct resource res;
const struct of_device_id *match;
unsigned long quirks;
unsigned long quirks __maybe_unused;
int rc;
np = of_find_matching_node_and_match(NULL, sifive_ccache_ids, &match);

View File

@ -768,6 +768,7 @@ static struct clk_smd_rpm *msm8976_clks[] = {
static const struct rpm_smd_clk_desc rpm_clk_msm8976 = {
.clks = msm8976_clks,
.num_clks = ARRAY_SIZE(msm8976_clks),
.icc_clks = bimc_pcnoc_snoc_smmnoc_icc_clks,
.num_icc_clks = ARRAY_SIZE(bimc_pcnoc_snoc_smmnoc_icc_clks),
};

View File

@ -487,9 +487,14 @@ int gdsc_register(struct gdsc_desc *desc,
if (!scs[i] || !scs[i]->supply)
continue;
scs[i]->rsupply = devm_regulator_get(dev, scs[i]->supply);
if (IS_ERR(scs[i]->rsupply))
return PTR_ERR(scs[i]->rsupply);
scs[i]->rsupply = devm_regulator_get_optional(dev, scs[i]->supply);
if (IS_ERR(scs[i]->rsupply)) {
ret = PTR_ERR(scs[i]->rsupply);
if (ret != -ENODEV)
return ret;
scs[i]->rsupply = NULL;
}
}
data->num_domains = num;

View File

@ -13,9 +13,9 @@
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/pm.h>
#include <linux/property.h>
#define EXYNOS_CLKOUT_NR_CLKS 1
#define EXYNOS_CLKOUT_PARENTS 32
@ -84,17 +84,24 @@ MODULE_DEVICE_TABLE(of, exynos_clkout_ids);
static int exynos_clkout_match_parent_dev(struct device *dev, u32 *mux_mask)
{
const struct exynos_clkout_variant *variant;
const struct of_device_id *match;
if (!dev->parent) {
dev_err(dev, "not instantiated from MFD\n");
return -EINVAL;
}
variant = device_get_match_data(dev->parent);
if (!variant) {
/*
* 'exynos_clkout_ids' arrays is not the ids array matched by
* the dev->parent driver, so of_device_get_match_data() or
* device_get_match_data() cannot be used here.
*/
match = of_match_device(exynos_clkout_ids, dev->parent);
if (!match) {
dev_err(dev, "cannot match parent device\n");
return -EINVAL;
}
variant = match->data;
*mux_mask = variant->mux_mask;

View File

@ -182,6 +182,8 @@ static struct ccu_nkm pll_mipi_clk = {
&ccu_nkm_ops,
CLK_SET_RATE_UNGATE | CLK_SET_RATE_PARENT),
.features = CCU_FEATURE_CLOSEST_RATE,
.min_rate = 500000000,
.max_rate = 1400000000,
},
};

View File

@ -1181,11 +1181,18 @@ static const u32 usb2_clk_regs[] = {
SUN50I_H6_USB3_CLK_REG,
};
static struct ccu_mux_nb sun50i_h6_cpu_nb = {
.common = &cpux_clk.common,
.cm = &cpux_clk.mux,
.delay_us = 1,
.bypass_index = 0, /* index of 24 MHz oscillator */
};
static int sun50i_h6_ccu_probe(struct platform_device *pdev)
{
void __iomem *reg;
int i, ret;
u32 val;
int i;
reg = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(reg))
@ -1252,7 +1259,15 @@ static int sun50i_h6_ccu_probe(struct platform_device *pdev)
val |= BIT(24);
writel(val, reg + SUN50I_H6_HDMI_CEC_CLK_REG);
return devm_sunxi_ccu_probe(&pdev->dev, reg, &sun50i_h6_ccu_desc);
ret = devm_sunxi_ccu_probe(&pdev->dev, reg, &sun50i_h6_ccu_desc);
if (ret)
return ret;
/* Reparent CPU during PLL CPUX rate changes */
ccu_mux_notifier_register(pll_cpux_clk.common.hw.clk,
&sun50i_h6_cpu_nb);
return 0;
}
static const struct of_device_id sun50i_h6_ccu_ids[] = {

View File

@ -44,6 +44,16 @@ bool ccu_is_better_rate(struct ccu_common *common,
unsigned long current_rate,
unsigned long best_rate)
{
unsigned long min_rate, max_rate;
clk_hw_get_rate_range(&common->hw, &min_rate, &max_rate);
if (current_rate > max_rate)
return false;
if (current_rate < min_rate)
return false;
if (common->features & CCU_FEATURE_CLOSEST_RATE)
return abs(current_rate - target_rate) < abs(best_rate - target_rate);
@ -122,6 +132,7 @@ static int sunxi_ccu_probe(struct sunxi_ccu *ccu, struct device *dev,
for (i = 0; i < desc->hw_clks->num ; i++) {
struct clk_hw *hw = desc->hw_clks->hws[i];
struct ccu_common *common = hw_to_ccu_common(hw);
const char *name;
if (!hw)
@ -136,6 +147,14 @@ static int sunxi_ccu_probe(struct sunxi_ccu *ccu, struct device *dev,
pr_err("Couldn't register clock %d - %s\n", i, name);
goto err_clk_unreg;
}
if (common->max_rate)
clk_hw_set_rate_range(hw, common->min_rate,
common->max_rate);
else
WARN(common->min_rate,
"No max_rate, ignoring min_rate of clock %d - %s\n",
i, name);
}
ret = of_clk_add_hw_provider(node, of_clk_hw_onecell_get,

View File

@ -31,6 +31,9 @@ struct ccu_common {
u16 lock_reg;
u32 prediv;
unsigned long min_rate;
unsigned long max_rate;
unsigned long features;
spinlock_t *lock;
struct clk_hw hw;

View File

@ -2184,6 +2184,7 @@ static bool parent_port_is_cxl_root(struct cxl_port *port)
int cxl_endpoint_get_perf_coordinates(struct cxl_port *port,
struct access_coordinate *coord)
{
struct cxl_memdev *cxlmd = to_cxl_memdev(port->uport_dev);
struct access_coordinate c[] = {
{
.read_bandwidth = UINT_MAX,
@ -2197,12 +2198,20 @@ int cxl_endpoint_get_perf_coordinates(struct cxl_port *port,
struct cxl_port *iter = port;
struct cxl_dport *dport;
struct pci_dev *pdev;
struct device *dev;
unsigned int bw;
bool is_cxl_root;
if (!is_cxl_endpoint(port))
return -EINVAL;
/*
* Skip calculation for RCD. Expectation is HMAT already covers RCD case
* since RCH does not support hotplug.
*/
if (cxlmd->cxlds->rcd)
return 0;
/*
* Exit the loop when the parent port of the current iter port is cxl
* root. The iterative loop starts at the endpoint and gathers the
@ -2232,8 +2241,12 @@ int cxl_endpoint_get_perf_coordinates(struct cxl_port *port,
return -EINVAL;
cxl_coordinates_combine(c, c, dport->coord);
dev = port->uport_dev->parent;
if (!dev_is_pci(dev))
return -ENODEV;
/* Get the calculated PCI paths bandwidth */
pdev = to_pci_dev(port->uport_dev->parent);
pdev = to_pci_dev(dev);
bw = pcie_bandwidth_available(pdev, NULL, NULL, NULL);
if (bw == 0)
return -ENXIO;

View File

@ -425,7 +425,7 @@ static void handle_error(struct mem_ctl_info *mci, struct ecc_status *stat)
convert_to_physical(priv, pinf), pinf.burstpos);
edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci,
priv->ce_cnt, 0, 0, 0, 0, 0, -1,
1, 0, 0, 0, 0, 0, -1,
priv->message, "");
}
@ -438,7 +438,7 @@ static void handle_error(struct mem_ctl_info *mci, struct ecc_status *stat)
convert_to_physical(priv, pinf), pinf.burstpos);
edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci,
priv->ue_cnt, 0, 0, 0, 0, 0, -1,
1, 0, 0, 0, 0, 0, -1,
priv->message, "");
}
@ -865,6 +865,9 @@ static ssize_t inject_data_ue_store(struct file *file, const char __user *data,
for (i = 0; i < NUM_UE_BITPOS; i++)
token[i] = strsep(&pbuf, ",");
if (!token[0] || !token[1])
return -EFAULT;
ret = kstrtou8(token[0], 0, &ue0);
if (ret)
return ret;
@ -1135,8 +1138,7 @@ static int mc_probe(struct platform_device *pdev)
}
rc = xlnx_register_event(PM_NOTIFY_CB, VERSAL_EVENT_ERROR_PMC_ERR1,
XPM_EVENT_ERROR_MASK_DDRMC_CR | XPM_EVENT_ERROR_MASK_DDRMC_NCR |
XPM_EVENT_ERROR_MASK_NOC_CR | XPM_EVENT_ERROR_MASK_NOC_NCR,
XPM_EVENT_ERROR_MASK_DDRMC_CR | XPM_EVENT_ERROR_MASK_DDRMC_NCR,
false, err_callback, mci);
if (rc) {
if (rc == -EACCES)
@ -1173,8 +1175,6 @@ static void mc_remove(struct platform_device *pdev)
xlnx_unregister_event(PM_NOTIFY_CB, VERSAL_EVENT_ERROR_PMC_ERR1,
XPM_EVENT_ERROR_MASK_DDRMC_CR |
XPM_EVENT_ERROR_MASK_NOC_CR |
XPM_EVENT_ERROR_MASK_NOC_NCR |
XPM_EVENT_ERROR_MASK_DDRMC_NCR, err_callback, mci);
edac_mc_del_mc(&pdev->dev);
edac_mc_free(mci);

View File

@ -148,10 +148,12 @@ packet_buffer_get(struct client *client, char __user *data, size_t user_length)
if (atomic_read(&buffer->size) == 0)
return -ENODEV;
/* FIXME: Check length <= user_length. */
length = buffer->head->length;
if (length > user_length)
return 0;
end = buffer->data + buffer->capacity;
length = buffer->head->length;
if (&buffer->head->data[length] < end) {
if (copy_to_user(data, buffer->head->data, length))

View File

@ -1556,6 +1556,8 @@ static int handle_at_packet(struct context *context,
#define HEADER_GET_DATA_LENGTH(q) (((q) >> 16) & 0xffff)
#define HEADER_GET_EXTENDED_TCODE(q) (((q) >> 0) & 0xffff)
static u32 get_cycle_time(struct fw_ohci *ohci);
static void handle_local_rom(struct fw_ohci *ohci,
struct fw_packet *packet, u32 csr)
{
@ -1580,6 +1582,8 @@ static void handle_local_rom(struct fw_ohci *ohci,
(void *) ohci->config_rom + i, length);
}
// Timestamping on behalf of the hardware.
response.timestamp = cycle_time_to_ohci_tstamp(get_cycle_time(ohci));
fw_core_handle_response(&ohci->card, &response);
}
@ -1628,6 +1632,8 @@ static void handle_local_lock(struct fw_ohci *ohci,
fw_fill_response(&response, packet->header, RCODE_BUSY, NULL, 0);
out:
// Timestamping on behalf of the hardware.
response.timestamp = cycle_time_to_ohci_tstamp(get_cycle_time(ohci));
fw_core_handle_response(&ohci->card, &response);
}
@ -1670,8 +1676,6 @@ static void handle_local_request(struct context *ctx, struct fw_packet *packet)
}
}
static u32 get_cycle_time(struct fw_ohci *ohci);
static void at_context_transmit(struct context *ctx, struct fw_packet *packet)
{
unsigned long flags;

View File

@ -4,6 +4,7 @@
#include <linux/memblock.h>
#include <linux/spinlock.h>
#include <linux/crash_dump.h>
#include <linux/nmi.h>
#include <asm/unaccepted_memory.h>
/* Protects unaccepted memory bitmap and accepting_list */
@ -149,6 +150,9 @@ retry:
}
list_del(&range.list);
touch_softlockup_watchdog();
spin_unlock_irqrestore(&unaccepted_memory_lock, flags);
}

View File

@ -206,10 +206,12 @@ static int mpfs_auto_update_verify_image(struct fw_upload *fw_uploader)
if (ret | response->resp_status) {
dev_warn(priv->dev, "Verification of Upgrade Image failed!\n");
ret = ret ? ret : -EBADMSG;
goto free_message;
}
dev_info(priv->dev, "Verification of Upgrade Image passed!\n");
free_message:
devm_kfree(priv->dev, message);
free_response:
devm_kfree(priv->dev, response);
@ -265,7 +267,7 @@ static int mpfs_auto_update_set_image_address(struct mpfs_auto_update_priv *priv
AUTO_UPDATE_DIRECTORY_WIDTH);
memset(buffer + AUTO_UPDATE_BLANK_DIRECTORY, 0x0, AUTO_UPDATE_DIRECTORY_WIDTH);
dev_info(priv->dev, "Writing the image address (%x) to the flash directory (%llx)\n",
dev_info(priv->dev, "Writing the image address (0x%x) to the flash directory (0x%llx)\n",
image_address, directory_address);
ret = mtd_write(priv->flash, 0x0, erase_size, &bytes_written, (u_char *)buffer);
@ -313,7 +315,7 @@ static int mpfs_auto_update_write_bitstream(struct fw_upload *fw_uploader, const
erase.len = round_up(size, (size_t)priv->flash->erasesize);
erase.addr = image_address;
dev_info(priv->dev, "Erasing the flash at address (%x)\n", image_address);
dev_info(priv->dev, "Erasing the flash at address (0x%x)\n", image_address);
ret = mtd_erase(priv->flash, &erase);
if (ret)
goto out;
@ -323,7 +325,7 @@ static int mpfs_auto_update_write_bitstream(struct fw_upload *fw_uploader, const
* will do all of that itself - including verifying that the bitstream
* is valid.
*/
dev_info(priv->dev, "Writing the image to the flash at address (%x)\n", image_address);
dev_info(priv->dev, "Writing the image to the flash at address (0x%x)\n", image_address);
ret = mtd_write(priv->flash, (loff_t)image_address, size, &bytes_written, data);
if (ret)
goto out;

View File

@ -78,6 +78,7 @@ static void cci_pci_free_irq(struct pci_dev *pcidev)
#define PCIE_DEVICE_ID_SILICOM_PAC_N5011 0x1001
#define PCIE_DEVICE_ID_INTEL_DFL 0xbcce
/* PCI Subdevice ID for PCIE_DEVICE_ID_INTEL_DFL */
#define PCIE_SUBDEVICE_ID_INTEL_D5005 0x138d
#define PCIE_SUBDEVICE_ID_INTEL_N6000 0x1770
#define PCIE_SUBDEVICE_ID_INTEL_N6001 0x1771
#define PCIE_SUBDEVICE_ID_INTEL_C6100 0x17d4
@ -101,6 +102,8 @@ static struct pci_device_id cci_pcie_id_tbl[] = {
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCIE_DEVICE_ID_INTEL_PAC_D5005_VF),},
{PCI_DEVICE(PCI_VENDOR_ID_SILICOM_DENMARK, PCIE_DEVICE_ID_SILICOM_PAC_N5010),},
{PCI_DEVICE(PCI_VENDOR_ID_SILICOM_DENMARK, PCIE_DEVICE_ID_SILICOM_PAC_N5011),},
{PCI_DEVICE_SUB(PCI_VENDOR_ID_INTEL, PCIE_DEVICE_ID_INTEL_DFL,
PCI_VENDOR_ID_INTEL, PCIE_SUBDEVICE_ID_INTEL_D5005),},
{PCI_DEVICE_SUB(PCI_VENDOR_ID_INTEL, PCIE_DEVICE_ID_INTEL_DFL,
PCI_VENDOR_ID_INTEL, PCIE_SUBDEVICE_ID_INTEL_N6000),},
{PCI_DEVICE_SUB(PCI_VENDOR_ID_INTEL, PCIE_DEVICE_ID_INTEL_DFL_VF,

View File

@ -220,7 +220,7 @@ int amdgpu_amdkfd_reserve_mem_limit(struct amdgpu_device *adev,
(kfd_mem_limit.ttm_mem_used + ttm_mem_needed >
kfd_mem_limit.max_ttm_mem_limit) ||
(adev && xcp_id >= 0 && adev->kfd.vram_used[xcp_id] + vram_needed >
vram_size - reserved_for_pt)) {
vram_size - reserved_for_pt - atomic64_read(&adev->vram_pin_size))) {
ret = -ENOMEM;
goto release;
}

View File

@ -1243,14 +1243,18 @@ int amdgpu_bo_get_metadata(struct amdgpu_bo *bo, void *buffer,
* amdgpu_bo_move_notify - notification about a memory move
* @bo: pointer to a buffer object
* @evict: if this move is evicting the buffer from the graphics address space
* @new_mem: new resource for backing the BO
*
* Marks the corresponding &amdgpu_bo buffer object as invalid, also performs
* bookkeeping.
* TTM driver callback which is called when ttm moves a buffer.
*/
void amdgpu_bo_move_notify(struct ttm_buffer_object *bo, bool evict)
void amdgpu_bo_move_notify(struct ttm_buffer_object *bo,
bool evict,
struct ttm_resource *new_mem)
{
struct amdgpu_device *adev = amdgpu_ttm_adev(bo->bdev);
struct ttm_resource *old_mem = bo->resource;
struct amdgpu_bo *abo;
if (!amdgpu_bo_is_amdgpu_bo(bo))
@ -1262,12 +1266,12 @@ void amdgpu_bo_move_notify(struct ttm_buffer_object *bo, bool evict)
amdgpu_bo_kunmap(abo);
if (abo->tbo.base.dma_buf && !abo->tbo.base.import_attach &&
bo->resource->mem_type != TTM_PL_SYSTEM)
old_mem && old_mem->mem_type != TTM_PL_SYSTEM)
dma_buf_move_notify(abo->tbo.base.dma_buf);
/* remember the eviction */
if (evict)
atomic64_inc(&adev->num_evictions);
/* move_notify is called before move happens */
trace_amdgpu_bo_move(abo, new_mem ? new_mem->mem_type : -1,
old_mem ? old_mem->mem_type : -1);
}
void amdgpu_bo_get_memory(struct amdgpu_bo *bo,

View File

@ -328,7 +328,9 @@ int amdgpu_bo_set_metadata (struct amdgpu_bo *bo, void *metadata,
int amdgpu_bo_get_metadata(struct amdgpu_bo *bo, void *buffer,
size_t buffer_size, uint32_t *metadata_size,
uint64_t *flags);
void amdgpu_bo_move_notify(struct ttm_buffer_object *bo, bool evict);
void amdgpu_bo_move_notify(struct ttm_buffer_object *bo,
bool evict,
struct ttm_resource *new_mem);
void amdgpu_bo_release_notify(struct ttm_buffer_object *bo);
vm_fault_t amdgpu_bo_fault_reserve_notify(struct ttm_buffer_object *bo);
void amdgpu_bo_fence(struct amdgpu_bo *bo, struct dma_fence *fence,

View File

@ -419,7 +419,7 @@ bool amdgpu_res_cpu_visible(struct amdgpu_device *adev,
return false;
if (res->mem_type == TTM_PL_SYSTEM || res->mem_type == TTM_PL_TT ||
res->mem_type == AMDGPU_PL_PREEMPT)
res->mem_type == AMDGPU_PL_PREEMPT || res->mem_type == AMDGPU_PL_DOORBELL)
return true;
if (res->mem_type != TTM_PL_VRAM)
@ -481,14 +481,16 @@ static int amdgpu_bo_move(struct ttm_buffer_object *bo, bool evict,
if (!old_mem || (old_mem->mem_type == TTM_PL_SYSTEM &&
bo->ttm == NULL)) {
amdgpu_bo_move_notify(bo, evict, new_mem);
ttm_bo_move_null(bo, new_mem);
goto out;
return 0;
}
if (old_mem->mem_type == TTM_PL_SYSTEM &&
(new_mem->mem_type == TTM_PL_TT ||
new_mem->mem_type == AMDGPU_PL_PREEMPT)) {
amdgpu_bo_move_notify(bo, evict, new_mem);
ttm_bo_move_null(bo, new_mem);
goto out;
return 0;
}
if ((old_mem->mem_type == TTM_PL_TT ||
old_mem->mem_type == AMDGPU_PL_PREEMPT) &&
@ -498,9 +500,10 @@ static int amdgpu_bo_move(struct ttm_buffer_object *bo, bool evict,
return r;
amdgpu_ttm_backend_unbind(bo->bdev, bo->ttm);
amdgpu_bo_move_notify(bo, evict, new_mem);
ttm_resource_free(bo, &bo->resource);
ttm_bo_assign_mem(bo, new_mem);
goto out;
return 0;
}
if (old_mem->mem_type == AMDGPU_PL_GDS ||
@ -512,8 +515,9 @@ static int amdgpu_bo_move(struct ttm_buffer_object *bo, bool evict,
new_mem->mem_type == AMDGPU_PL_OA ||
new_mem->mem_type == AMDGPU_PL_DOORBELL) {
/* Nothing to save here */
amdgpu_bo_move_notify(bo, evict, new_mem);
ttm_bo_move_null(bo, new_mem);
goto out;
return 0;
}
if (bo->type == ttm_bo_type_device &&
@ -525,23 +529,24 @@ static int amdgpu_bo_move(struct ttm_buffer_object *bo, bool evict,
abo->flags &= ~AMDGPU_GEM_CREATE_CPU_ACCESS_REQUIRED;
}
if (adev->mman.buffer_funcs_enabled) {
if (((old_mem->mem_type == TTM_PL_SYSTEM &&
new_mem->mem_type == TTM_PL_VRAM) ||
(old_mem->mem_type == TTM_PL_VRAM &&
new_mem->mem_type == TTM_PL_SYSTEM))) {
hop->fpfn = 0;
hop->lpfn = 0;
hop->mem_type = TTM_PL_TT;
hop->flags = TTM_PL_FLAG_TEMPORARY;
return -EMULTIHOP;
}
r = amdgpu_move_blit(bo, evict, new_mem, old_mem);
} else {
r = -ENODEV;
if (adev->mman.buffer_funcs_enabled &&
((old_mem->mem_type == TTM_PL_SYSTEM &&
new_mem->mem_type == TTM_PL_VRAM) ||
(old_mem->mem_type == TTM_PL_VRAM &&
new_mem->mem_type == TTM_PL_SYSTEM))) {
hop->fpfn = 0;
hop->lpfn = 0;
hop->mem_type = TTM_PL_TT;
hop->flags = TTM_PL_FLAG_TEMPORARY;
return -EMULTIHOP;
}
amdgpu_bo_move_notify(bo, evict, new_mem);
if (adev->mman.buffer_funcs_enabled)
r = amdgpu_move_blit(bo, evict, new_mem, old_mem);
else
r = -ENODEV;
if (r) {
/* Check that all memory is CPU accessible */
if (!amdgpu_res_copyable(adev, old_mem) ||
@ -555,11 +560,10 @@ static int amdgpu_bo_move(struct ttm_buffer_object *bo, bool evict,
return r;
}
trace_amdgpu_bo_move(abo, new_mem->mem_type, old_mem->mem_type);
out:
/* update statistics */
/* update statistics after the move */
if (evict)
atomic64_inc(&adev->num_evictions);
atomic64_add(bo->base.size, &adev->num_bytes_moved);
amdgpu_bo_move_notify(bo, evict);
return 0;
}
@ -1559,7 +1563,7 @@ static int amdgpu_ttm_access_memory(struct ttm_buffer_object *bo,
static void
amdgpu_bo_delete_mem_notify(struct ttm_buffer_object *bo)
{
amdgpu_bo_move_notify(bo, false);
amdgpu_bo_move_notify(bo, false, NULL);
}
static struct ttm_device_funcs amdgpu_bo_driver = {

View File

@ -829,6 +829,14 @@ struct kfd_process *kfd_create_process(struct task_struct *thread)
if (process) {
pr_debug("Process already found\n");
} else {
/* If the process just called exec(3), it is possible that the
* cleanup of the kfd_process (following the release of the mm
* of the old process image) is still in the cleanup work queue.
* Make sure to drain any job before trying to recreate any
* resource for this process.
*/
flush_workqueue(kfd_process_wq);
process = create_process(thread);
if (IS_ERR(process))
goto out;

View File

@ -4537,15 +4537,18 @@ static int amdgpu_dm_initialize_drm_device(struct amdgpu_device *adev)
/* Determine whether to enable Replay support by default. */
if (!(amdgpu_dc_debug_mask & DC_DISABLE_REPLAY)) {
switch (amdgpu_ip_version(adev, DCE_HWIP, 0)) {
case IP_VERSION(3, 1, 4):
case IP_VERSION(3, 1, 5):
case IP_VERSION(3, 1, 6):
case IP_VERSION(3, 2, 0):
case IP_VERSION(3, 2, 1):
case IP_VERSION(3, 5, 0):
case IP_VERSION(3, 5, 1):
replay_feature_enabled = true;
break;
/*
* Disabled by default due to https://gitlab.freedesktop.org/drm/amd/-/issues/3344
* case IP_VERSION(3, 1, 4):
* case IP_VERSION(3, 1, 5):
* case IP_VERSION(3, 1, 6):
* case IP_VERSION(3, 2, 0):
* case IP_VERSION(3, 2, 1):
* case IP_VERSION(3, 5, 0):
* case IP_VERSION(3, 5, 1):
* replay_feature_enabled = true;
* break;
*/
default:
replay_feature_enabled = amdgpu_dc_feature_mask & DC_REPLAY_MASK;
break;

View File

@ -1495,7 +1495,9 @@ static ssize_t dp_dsc_clock_en_read(struct file *f, char __user *buf,
for (i = 0; i < MAX_PIPES; i++) {
pipe_ctx = &aconnector->dc_link->dc->current_state->res_ctx.pipe_ctx[i];
if (pipe_ctx->stream &&
pipe_ctx->stream->link == aconnector->dc_link)
pipe_ctx->stream->link == aconnector->dc_link &&
pipe_ctx->stream->sink &&
pipe_ctx->stream->sink == aconnector->dc_sink)
break;
}
@ -1596,7 +1598,9 @@ static ssize_t dp_dsc_clock_en_write(struct file *f, const char __user *buf,
for (i = 0; i < MAX_PIPES; i++) {
pipe_ctx = &aconnector->dc_link->dc->current_state->res_ctx.pipe_ctx[i];
if (pipe_ctx->stream &&
pipe_ctx->stream->link == aconnector->dc_link)
pipe_ctx->stream->link == aconnector->dc_link &&
pipe_ctx->stream->sink &&
pipe_ctx->stream->sink == aconnector->dc_sink)
break;
}
@ -1681,7 +1685,9 @@ static ssize_t dp_dsc_slice_width_read(struct file *f, char __user *buf,
for (i = 0; i < MAX_PIPES; i++) {
pipe_ctx = &aconnector->dc_link->dc->current_state->res_ctx.pipe_ctx[i];
if (pipe_ctx->stream &&
pipe_ctx->stream->link == aconnector->dc_link)
pipe_ctx->stream->link == aconnector->dc_link &&
pipe_ctx->stream->sink &&
pipe_ctx->stream->sink == aconnector->dc_sink)
break;
}
@ -1780,7 +1786,9 @@ static ssize_t dp_dsc_slice_width_write(struct file *f, const char __user *buf,
for (i = 0; i < MAX_PIPES; i++) {
pipe_ctx = &aconnector->dc_link->dc->current_state->res_ctx.pipe_ctx[i];
if (pipe_ctx->stream &&
pipe_ctx->stream->link == aconnector->dc_link)
pipe_ctx->stream->link == aconnector->dc_link &&
pipe_ctx->stream->sink &&
pipe_ctx->stream->sink == aconnector->dc_sink)
break;
}
@ -1865,7 +1873,9 @@ static ssize_t dp_dsc_slice_height_read(struct file *f, char __user *buf,
for (i = 0; i < MAX_PIPES; i++) {
pipe_ctx = &aconnector->dc_link->dc->current_state->res_ctx.pipe_ctx[i];
if (pipe_ctx->stream &&
pipe_ctx->stream->link == aconnector->dc_link)
pipe_ctx->stream->link == aconnector->dc_link &&
pipe_ctx->stream->sink &&
pipe_ctx->stream->sink == aconnector->dc_sink)
break;
}
@ -1964,7 +1974,9 @@ static ssize_t dp_dsc_slice_height_write(struct file *f, const char __user *buf,
for (i = 0; i < MAX_PIPES; i++) {
pipe_ctx = &aconnector->dc_link->dc->current_state->res_ctx.pipe_ctx[i];
if (pipe_ctx->stream &&
pipe_ctx->stream->link == aconnector->dc_link)
pipe_ctx->stream->link == aconnector->dc_link &&
pipe_ctx->stream->sink &&
pipe_ctx->stream->sink == aconnector->dc_sink)
break;
}
@ -2045,7 +2057,9 @@ static ssize_t dp_dsc_bits_per_pixel_read(struct file *f, char __user *buf,
for (i = 0; i < MAX_PIPES; i++) {
pipe_ctx = &aconnector->dc_link->dc->current_state->res_ctx.pipe_ctx[i];
if (pipe_ctx->stream &&
pipe_ctx->stream->link == aconnector->dc_link)
pipe_ctx->stream->link == aconnector->dc_link &&
pipe_ctx->stream->sink &&
pipe_ctx->stream->sink == aconnector->dc_sink)
break;
}
@ -2141,7 +2155,9 @@ static ssize_t dp_dsc_bits_per_pixel_write(struct file *f, const char __user *bu
for (i = 0; i < MAX_PIPES; i++) {
pipe_ctx = &aconnector->dc_link->dc->current_state->res_ctx.pipe_ctx[i];
if (pipe_ctx->stream &&
pipe_ctx->stream->link == aconnector->dc_link)
pipe_ctx->stream->link == aconnector->dc_link &&
pipe_ctx->stream->sink &&
pipe_ctx->stream->sink == aconnector->dc_sink)
break;
}
@ -2220,7 +2236,9 @@ static ssize_t dp_dsc_pic_width_read(struct file *f, char __user *buf,
for (i = 0; i < MAX_PIPES; i++) {
pipe_ctx = &aconnector->dc_link->dc->current_state->res_ctx.pipe_ctx[i];
if (pipe_ctx->stream &&
pipe_ctx->stream->link == aconnector->dc_link)
pipe_ctx->stream->link == aconnector->dc_link &&
pipe_ctx->stream->sink &&
pipe_ctx->stream->sink == aconnector->dc_sink)
break;
}
@ -2276,7 +2294,9 @@ static ssize_t dp_dsc_pic_height_read(struct file *f, char __user *buf,
for (i = 0; i < MAX_PIPES; i++) {
pipe_ctx = &aconnector->dc_link->dc->current_state->res_ctx.pipe_ctx[i];
if (pipe_ctx->stream &&
pipe_ctx->stream->link == aconnector->dc_link)
pipe_ctx->stream->link == aconnector->dc_link &&
pipe_ctx->stream->sink &&
pipe_ctx->stream->sink == aconnector->dc_sink)
break;
}
@ -2347,7 +2367,9 @@ static ssize_t dp_dsc_chunk_size_read(struct file *f, char __user *buf,
for (i = 0; i < MAX_PIPES; i++) {
pipe_ctx = &aconnector->dc_link->dc->current_state->res_ctx.pipe_ctx[i];
if (pipe_ctx->stream &&
pipe_ctx->stream->link == aconnector->dc_link)
pipe_ctx->stream->link == aconnector->dc_link &&
pipe_ctx->stream->sink &&
pipe_ctx->stream->sink == aconnector->dc_sink)
break;
}
@ -2418,7 +2440,9 @@ static ssize_t dp_dsc_slice_bpg_offset_read(struct file *f, char __user *buf,
for (i = 0; i < MAX_PIPES; i++) {
pipe_ctx = &aconnector->dc_link->dc->current_state->res_ctx.pipe_ctx[i];
if (pipe_ctx->stream &&
pipe_ctx->stream->link == aconnector->dc_link)
pipe_ctx->stream->link == aconnector->dc_link &&
pipe_ctx->stream->sink &&
pipe_ctx->stream->sink == aconnector->dc_sink)
break;
}

View File

@ -2948,6 +2948,7 @@ static enum bp_result construct_integrated_info(
result = get_integrated_info_v2_1(bp, info);
break;
case 2:
case 3:
result = get_integrated_info_v2_2(bp, info);
break;
default:

View File

@ -145,6 +145,10 @@ static void dcn315_update_clocks(struct clk_mgr *clk_mgr_base,
*/
clk_mgr_base->clks.zstate_support = new_clocks->zstate_support;
if (safe_to_lower) {
if (clk_mgr_base->clks.dtbclk_en && !new_clocks->dtbclk_en) {
dcn315_smu_set_dtbclk(clk_mgr, false);
clk_mgr_base->clks.dtbclk_en = new_clocks->dtbclk_en;
}
/* check that we're not already in lower */
if (clk_mgr_base->clks.pwr_state != DCN_PWR_STATE_LOW_POWER) {
display_count = dcn315_get_active_display_cnt_wa(dc, context);
@ -160,6 +164,10 @@ static void dcn315_update_clocks(struct clk_mgr *clk_mgr_base,
}
}
} else {
if (!clk_mgr_base->clks.dtbclk_en && new_clocks->dtbclk_en) {
dcn315_smu_set_dtbclk(clk_mgr, true);
clk_mgr_base->clks.dtbclk_en = new_clocks->dtbclk_en;
}
/* check that we're not already in D0 */
if (clk_mgr_base->clks.pwr_state != DCN_PWR_STATE_MISSION_MODE) {
union display_idle_optimization_u idle_info = { 0 };

View File

@ -712,8 +712,12 @@ static void dcn32_update_clocks(struct clk_mgr *clk_mgr_base,
* since we calculate mode support based on softmax being the max UCLK
* frequency.
*/
dcn32_smu_set_hard_min_by_freq(clk_mgr, PPCLK_UCLK,
dc->clk_mgr->bw_params->dc_mode_softmax_memclk);
if (dc->debug.disable_dc_mode_overwrite) {
dcn30_smu_set_hard_max_by_freq(clk_mgr, PPCLK_UCLK, dc->clk_mgr->bw_params->max_memclk_mhz);
dcn32_smu_set_hard_min_by_freq(clk_mgr, PPCLK_UCLK, dc->clk_mgr->bw_params->max_memclk_mhz);
} else
dcn32_smu_set_hard_min_by_freq(clk_mgr, PPCLK_UCLK,
dc->clk_mgr->bw_params->dc_mode_softmax_memclk);
} else {
dcn32_smu_set_hard_min_by_freq(clk_mgr, PPCLK_UCLK, dc->clk_mgr->bw_params->max_memclk_mhz);
}
@ -746,8 +750,13 @@ static void dcn32_update_clocks(struct clk_mgr *clk_mgr_base,
/* set UCLK to requested value if P-State switching is supported, or to re-enable P-State switching */
if (clk_mgr_base->clks.p_state_change_support &&
(update_uclk || !clk_mgr_base->clks.prev_p_state_change_support) &&
!dc->work_arounds.clock_update_disable_mask.uclk)
!dc->work_arounds.clock_update_disable_mask.uclk) {
if (dc->clk_mgr->dc_mode_softmax_enabled && dc->debug.disable_dc_mode_overwrite)
dcn30_smu_set_hard_max_by_freq(clk_mgr, PPCLK_UCLK,
max((int)dc->clk_mgr->bw_params->dc_mode_softmax_memclk, khz_to_mhz_ceil(clk_mgr_base->clks.dramclk_khz)));
dcn32_smu_set_hard_min_by_freq(clk_mgr, PPCLK_UCLK, khz_to_mhz_ceil(clk_mgr_base->clks.dramclk_khz));
}
if (clk_mgr_base->clks.num_ways != new_clocks->num_ways &&
clk_mgr_base->clks.num_ways > new_clocks->num_ways) {

View File

@ -1801,6 +1801,9 @@ bool dc_validate_boot_timing(const struct dc *dc,
return false;
}
if (link->dpcd_caps.channel_coding_cap.bits.DP_128b_132b_SUPPORTED)
return false;
if (dc->link_srv->edp_is_ilr_optimization_required(link, crtc_timing)) {
DC_LOG_EVENT_LINK_TRAINING("Seamless boot disabled to optimize eDP link rate\n");
return false;

View File

@ -395,6 +395,12 @@ void dcn31_hpo_dp_link_enc_set_throttled_vcp_size(
x),
25));
// If y rounds up to integer, carry it over to x.
if (y >> 25) {
x += 1;
y = 0;
}
switch (stream_encoder_inst) {
case 0:
REG_SET_2(DP_DPHY_SYM32_VC_RATE_CNTL0, 0,

View File

@ -291,6 +291,7 @@ static struct _vcs_dpi_soc_bounding_box_st dcn3_15_soc = {
.do_urgent_latency_adjustment = false,
.urgent_latency_adjustment_fabric_clock_component_us = 0,
.urgent_latency_adjustment_fabric_clock_reference_mhz = 0,
.dispclk_dppclk_vco_speed_mhz = 2400.0,
.num_chans = 4,
.dummy_pstate_latency_us = 10.0
};
@ -438,6 +439,7 @@ static struct _vcs_dpi_soc_bounding_box_st dcn3_16_soc = {
.do_urgent_latency_adjustment = false,
.urgent_latency_adjustment_fabric_clock_component_us = 0,
.urgent_latency_adjustment_fabric_clock_reference_mhz = 0,
.dispclk_dppclk_vco_speed_mhz = 2500.0,
};
void dcn31_zero_pipe_dcc_fraction(display_e2e_pipe_params_st *pipes,

View File

@ -270,7 +270,7 @@ static void set_usb4_req_bw_req(struct dc_link *link, int req_bw)
/* Error check whether requested and allocated are equal */
req_bw = requested_bw * (Kbps_TO_Gbps / link->dpia_bw_alloc_config.bw_granularity);
if (req_bw == link->dpia_bw_alloc_config.allocated_bw) {
if (req_bw && (req_bw == link->dpia_bw_alloc_config.allocated_bw)) {
DC_LOG_ERROR("%s: Request bw equals to allocated bw for link(%d)\n",
__func__, link->link_index);
}
@ -341,6 +341,14 @@ bool link_dp_dpia_set_dptx_usb4_bw_alloc_support(struct dc_link *link)
ret = true;
init_usb4_bw_struct(link);
link->dpia_bw_alloc_config.bw_alloc_enabled = true;
/*
* During DP tunnel creation, CM preallocates BW and reduces estimated BW of other
* DPIA. CM release preallocation only when allocation is complete. Do zero alloc
* to make the CM to release preallocation and update estimated BW correctly for
* all DPIAs per host router
*/
link_dp_dpia_allocate_usb4_bandwidth_for_stream(link, 0);
}
}

View File

@ -2449,6 +2449,7 @@ static bool dcn20_resource_construct(
dc->caps.post_blend_color_processing = true;
dc->caps.force_dp_tps4_for_cp2520 = true;
dc->caps.extended_aux_timeout_support = true;
dc->caps.dmcub_support = true;
/* Color pipeline capabilities */
dc->caps.color.dpp.dcn_arch = 1;

View File

@ -7,13 +7,14 @@
#include "pvr_rogue_mips.h"
#include <asm/page.h>
#include <linux/math.h>
#include <linux/types.h>
/* Forward declaration from pvr_gem.h. */
struct pvr_gem_object;
#define PVR_MIPS_PT_PAGE_COUNT ((ROGUE_MIPSFW_MAX_NUM_PAGETABLE_PAGES * ROGUE_MIPSFW_PAGE_SIZE_4K) \
>> PAGE_SHIFT)
#define PVR_MIPS_PT_PAGE_COUNT DIV_ROUND_UP(ROGUE_MIPSFW_MAX_NUM_PAGETABLE_PAGES * ROGUE_MIPSFW_PAGE_SIZE_4K, PAGE_SIZE)
/**
* struct pvr_fw_mips_data - MIPS-specific data
*/

View File

@ -15,7 +15,9 @@ struct nvkm_gsp_mem {
};
struct nvkm_gsp_radix3 {
struct nvkm_gsp_mem mem[3];
struct nvkm_gsp_mem lvl0;
struct nvkm_gsp_mem lvl1;
struct sg_table lvl2;
};
int nvkm_gsp_sg(struct nvkm_device *, u64 size, struct sg_table *);

View File

@ -205,7 +205,9 @@ nvkm_firmware_dtor(struct nvkm_firmware *fw)
break;
case NVKM_FIRMWARE_IMG_DMA:
nvkm_memory_unref(&memory);
dma_free_coherent(fw->device->dev, sg_dma_len(&fw->mem.sgl), fw->img, fw->phys);
dma_unmap_single(fw->device->dev, fw->phys, sg_dma_len(&fw->mem.sgl),
DMA_TO_DEVICE);
kfree(fw->img);
break;
case NVKM_FIRMWARE_IMG_SGT:
nvkm_memory_unref(&memory);
@ -235,14 +237,17 @@ nvkm_firmware_ctor(const struct nvkm_firmware_func *func, const char *name,
fw->img = kmemdup(src, fw->len, GFP_KERNEL);
break;
case NVKM_FIRMWARE_IMG_DMA: {
dma_addr_t addr;
len = ALIGN(fw->len, PAGE_SIZE);
fw->img = dma_alloc_coherent(fw->device->dev, len, &addr, GFP_KERNEL);
if (fw->img) {
memcpy(fw->img, src, fw->len);
fw->phys = addr;
fw->img = kmalloc(len, GFP_KERNEL);
if (!fw->img)
return -ENOMEM;
memcpy(fw->img, src, fw->len);
fw->phys = dma_map_single(fw->device->dev, fw->img, len, DMA_TO_DEVICE);
if (dma_mapping_error(fw->device->dev, fw->phys)) {
kfree(fw->img);
return -EFAULT;
}
sg_init_one(&fw->mem.sgl, fw->img, len);

View File

@ -1624,7 +1624,7 @@ r535_gsp_wpr_meta_init(struct nvkm_gsp *gsp)
meta->magic = GSP_FW_WPR_META_MAGIC;
meta->revision = GSP_FW_WPR_META_REVISION;
meta->sysmemAddrOfRadix3Elf = gsp->radix3.mem[0].addr;
meta->sysmemAddrOfRadix3Elf = gsp->radix3.lvl0.addr;
meta->sizeOfRadix3Elf = gsp->fb.wpr2.elf.size;
meta->sysmemAddrOfBootloader = gsp->boot.fw.addr;
@ -1919,8 +1919,9 @@ nvkm_gsp_sg(struct nvkm_device *device, u64 size, struct sg_table *sgt)
static void
nvkm_gsp_radix3_dtor(struct nvkm_gsp *gsp, struct nvkm_gsp_radix3 *rx3)
{
for (int i = ARRAY_SIZE(rx3->mem) - 1; i >= 0; i--)
nvkm_gsp_mem_dtor(gsp, &rx3->mem[i]);
nvkm_gsp_sg_free(gsp->subdev.device, &rx3->lvl2);
nvkm_gsp_mem_dtor(gsp, &rx3->lvl1);
nvkm_gsp_mem_dtor(gsp, &rx3->lvl0);
}
/**
@ -1960,36 +1961,60 @@ static int
nvkm_gsp_radix3_sg(struct nvkm_gsp *gsp, struct sg_table *sgt, u64 size,
struct nvkm_gsp_radix3 *rx3)
{
u64 addr;
struct sg_dma_page_iter sg_dma_iter;
struct scatterlist *sg;
size_t bufsize;
u64 *pte;
int ret, i, page_idx = 0;
for (int i = ARRAY_SIZE(rx3->mem) - 1; i >= 0; i--) {
u64 *ptes;
size_t bufsize;
int ret, idx;
ret = nvkm_gsp_mem_ctor(gsp, GSP_PAGE_SIZE, &rx3->lvl0);
if (ret)
return ret;
bufsize = ALIGN((size / GSP_PAGE_SIZE) * sizeof(u64), GSP_PAGE_SIZE);
ret = nvkm_gsp_mem_ctor(gsp, bufsize, &rx3->mem[i]);
if (ret)
return ret;
ret = nvkm_gsp_mem_ctor(gsp, GSP_PAGE_SIZE, &rx3->lvl1);
if (ret)
goto lvl1_fail;
ptes = rx3->mem[i].data;
if (i == 2) {
struct scatterlist *sgl;
// Allocate level 2
bufsize = ALIGN((size / GSP_PAGE_SIZE) * sizeof(u64), GSP_PAGE_SIZE);
ret = nvkm_gsp_sg(gsp->subdev.device, bufsize, &rx3->lvl2);
if (ret)
goto lvl2_fail;
for_each_sgtable_dma_sg(sgt, sgl, idx) {
for (int j = 0; j < sg_dma_len(sgl) / GSP_PAGE_SIZE; j++)
*ptes++ = sg_dma_address(sgl) + (GSP_PAGE_SIZE * j);
}
} else {
for (int j = 0; j < size / GSP_PAGE_SIZE; j++)
*ptes++ = addr + GSP_PAGE_SIZE * j;
// Write the bus address of level 1 to level 0
pte = rx3->lvl0.data;
*pte = rx3->lvl1.addr;
// Write the bus address of each page in level 2 to level 1
pte = rx3->lvl1.data;
for_each_sgtable_dma_page(&rx3->lvl2, &sg_dma_iter, 0)
*pte++ = sg_page_iter_dma_address(&sg_dma_iter);
// Finally, write the bus address of each page in sgt to level 2
for_each_sgtable_sg(&rx3->lvl2, sg, i) {
void *sgl_end;
pte = sg_virt(sg);
sgl_end = (void *)pte + sg->length;
for_each_sgtable_dma_page(sgt, &sg_dma_iter, page_idx) {
*pte++ = sg_page_iter_dma_address(&sg_dma_iter);
page_idx++;
// Go to the next scatterlist for level 2 if we've reached the end
if ((void *)pte >= sgl_end)
break;
}
size = rx3->mem[i].size;
addr = rx3->mem[i].addr;
}
return 0;
if (ret) {
lvl2_fail:
nvkm_gsp_mem_dtor(gsp, &rx3->lvl1);
lvl1_fail:
nvkm_gsp_mem_dtor(gsp, &rx3->lvl0);
}
return ret;
}
int
@ -2021,7 +2046,7 @@ r535_gsp_fini(struct nvkm_gsp *gsp, bool suspend)
sr = gsp->sr.meta.data;
sr->magic = GSP_FW_SR_META_MAGIC;
sr->revision = GSP_FW_SR_META_REVISION;
sr->sysmemAddrOfSuspendResumeData = gsp->sr.radix3.mem[0].addr;
sr->sysmemAddrOfSuspendResumeData = gsp->sr.radix3.lvl0.addr;
sr->sizeOfSuspendResumeData = len;
mbox0 = lower_32_bits(gsp->sr.meta.addr);

View File

@ -177,7 +177,7 @@ config DRM_PANEL_ILITEK_IL9322
config DRM_PANEL_ILITEK_ILI9341
tristate "Ilitek ILI9341 240x320 QVGA panels"
depends on OF && SPI
depends on SPI
select DRM_KMS_HELPER
select DRM_GEM_DMA_HELPER
depends on BACKLIGHT_CLASS_DEVICE

View File

@ -22,8 +22,9 @@
#include <linux/bitops.h>
#include <linux/delay.h>
#include <linux/gpio/consumer.h>
#include <linux/mod_devicetable.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/property.h>
#include <linux/regulator/consumer.h>
#include <linux/spi/spi.h>
@ -421,7 +422,7 @@ static int ili9341_dpi_prepare(struct drm_panel *panel)
ili9341_dpi_init(ili);
return ret;
return 0;
}
static int ili9341_dpi_enable(struct drm_panel *panel)
@ -691,7 +692,7 @@ static int ili9341_dpi_probe(struct spi_device *spi, struct gpio_desc *dc,
* Every new incarnation of this display must have a unique
* data entry for the system in this driver.
*/
ili->conf = of_device_get_match_data(dev);
ili->conf = device_get_match_data(dev);
if (!ili->conf) {
dev_err(dev, "missing device configuration\n");
return -ENODEV;
@ -714,18 +715,18 @@ static int ili9341_probe(struct spi_device *spi)
reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
if (IS_ERR(reset))
dev_err(dev, "Failed to get gpio 'reset'\n");
return dev_err_probe(dev, PTR_ERR(reset), "Failed to get gpio 'reset'\n");
dc = devm_gpiod_get_optional(dev, "dc", GPIOD_OUT_LOW);
if (IS_ERR(dc))
dev_err(dev, "Failed to get gpio 'dc'\n");
return dev_err_probe(dev, PTR_ERR(dc), "Failed to get gpio 'dc'\n");
if (!strcmp(id->name, "sf-tc240t-9370-t"))
return ili9341_dpi_probe(spi, dc, reset);
else if (!strcmp(id->name, "yx240qv29"))
return ili9341_dbi_probe(spi, dc, reset);
return -1;
return -ENODEV;
}
static void ili9341_remove(struct spi_device *spi)

View File

@ -58,56 +58,16 @@ static long qxl_fence_wait(struct dma_fence *fence, bool intr,
signed long timeout)
{
struct qxl_device *qdev;
struct qxl_release *release;
int count = 0, sc = 0;
bool have_drawable_releases;
unsigned long cur, end = jiffies + timeout;
qdev = container_of(fence->lock, struct qxl_device, release_lock);
release = container_of(fence, struct qxl_release, base);
have_drawable_releases = release->type == QXL_RELEASE_DRAWABLE;
retry:
sc++;
if (!wait_event_timeout(qdev->release_event,
(dma_fence_is_signaled(fence) ||
(qxl_io_notify_oom(qdev), 0)),
timeout))
return 0;
if (dma_fence_is_signaled(fence))
goto signaled;
qxl_io_notify_oom(qdev);
for (count = 0; count < 11; count++) {
if (!qxl_queue_garbage_collect(qdev, true))
break;
if (dma_fence_is_signaled(fence))
goto signaled;
}
if (dma_fence_is_signaled(fence))
goto signaled;
if (have_drawable_releases || sc < 4) {
if (sc > 2)
/* back off */
usleep_range(500, 1000);
if (time_after(jiffies, end))
return 0;
if (have_drawable_releases && sc > 300) {
DMA_FENCE_WARN(fence,
"failed to wait on release %llu after spincount %d\n",
fence->context & ~0xf0000000, sc);
goto signaled;
}
goto retry;
}
/*
* yeah, original sync_obj_wait gave up after 3 spins when
* have_drawable_releases is not set.
*/
signaled:
cur = jiffies;
if (time_after(cur, end))
return 0;

View File

@ -92,7 +92,7 @@ int ttm_tt_create(struct ttm_buffer_object *bo, bool zero_alloc)
*/
if (bdev->pool.use_dma_alloc && cc_platform_has(CC_ATTR_GUEST_MEM_ENCRYPT)) {
page_flags |= TTM_TT_FLAG_DECRYPTED;
drm_info(ddev, "TT memory decryption enabled.");
drm_info_once(ddev, "TT memory decryption enabled.");
}
bo->ttm = bdev->funcs->ttm_tt_create(bo, page_flags);

View File

@ -204,6 +204,7 @@ int vmw_bo_pin_in_start_of_vram(struct vmw_private *dev_priv,
VMW_BO_DOMAIN_VRAM,
VMW_BO_DOMAIN_VRAM);
buf->places[0].lpfn = PFN_UP(bo->resource->size);
buf->busy_places[0].lpfn = PFN_UP(bo->resource->size);
ret = ttm_bo_validate(bo, &buf->placement, &ctx);
/* For some reason we didn't end up at the start of vram */

View File

@ -991,7 +991,7 @@ static int vmw_event_fence_action_create(struct drm_file *file_priv,
}
event->event.base.type = DRM_VMW_EVENT_FENCE_SIGNALED;
event->event.base.length = sizeof(*event);
event->event.base.length = sizeof(event->event);
event->event.user_data = user_data;
ret = drm_event_reserve_init(dev, file_priv, &event->base, &event->event.base);

View File

@ -84,7 +84,8 @@ static inline struct drm_i915_private *kdev_to_i915(struct device *kdev)
#define IS_ROCKETLAKE(dev_priv) IS_PLATFORM(dev_priv, XE_ROCKETLAKE)
#define IS_DG1(dev_priv) IS_PLATFORM(dev_priv, XE_DG1)
#define IS_ALDERLAKE_S(dev_priv) IS_PLATFORM(dev_priv, XE_ALDERLAKE_S)
#define IS_ALDERLAKE_P(dev_priv) IS_PLATFORM(dev_priv, XE_ALDERLAKE_P)
#define IS_ALDERLAKE_P(dev_priv) (IS_PLATFORM(dev_priv, XE_ALDERLAKE_P) || \
IS_PLATFORM(dev_priv, XE_ALDERLAKE_N))
#define IS_XEHPSDV(dev_priv) (dev_priv && 0)
#define IS_DG2(dev_priv) IS_PLATFORM(dev_priv, XE_DG2)
#define IS_PONTEVECCHIO(dev_priv) IS_PLATFORM(dev_priv, XE_PVC)

View File

@ -1606,6 +1606,9 @@ static void vm_destroy_work_func(struct work_struct *w)
/* xe_vm_close_and_put was not called? */
xe_assert(xe, !vm->size);
if (xe_vm_in_preempt_fence_mode(vm))
flush_work(&vm->preempt.rebind_work);
mutex_destroy(&vm->snap_mutex);
if (!(vm->flags & XE_VM_FLAG_MIGRATION))

View File

@ -5,6 +5,7 @@
* Copyright (c) 2014, Intel Corporation.
*/
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/iio/iio.h>
@ -27,11 +28,16 @@
#define MXC4005_REG_ZOUT_UPPER 0x07
#define MXC4005_REG_ZOUT_LOWER 0x08
#define MXC4005_REG_INT_MASK0 0x0A
#define MXC4005_REG_INT_MASK1 0x0B
#define MXC4005_REG_INT_MASK1_BIT_DRDYE 0x01
#define MXC4005_REG_INT_CLR0 0x00
#define MXC4005_REG_INT_CLR1 0x01
#define MXC4005_REG_INT_CLR1_BIT_DRDYC 0x01
#define MXC4005_REG_INT_CLR1_SW_RST 0x10
#define MXC4005_REG_CONTROL 0x0D
#define MXC4005_REG_CONTROL_MASK_FSR GENMASK(6, 5)
@ -39,6 +45,9 @@
#define MXC4005_REG_DEVICE_ID 0x0E
/* Datasheet does not specify a reset time, this is a conservative guess */
#define MXC4005_RESET_TIME_US 2000
enum mxc4005_axis {
AXIS_X,
AXIS_Y,
@ -62,6 +71,8 @@ struct mxc4005_data {
s64 timestamp __aligned(8);
} scan;
bool trigger_enabled;
unsigned int control;
unsigned int int_mask1;
};
/*
@ -113,7 +124,9 @@ static bool mxc4005_is_readable_reg(struct device *dev, unsigned int reg)
static bool mxc4005_is_writeable_reg(struct device *dev, unsigned int reg)
{
switch (reg) {
case MXC4005_REG_INT_CLR0:
case MXC4005_REG_INT_CLR1:
case MXC4005_REG_INT_MASK0:
case MXC4005_REG_INT_MASK1:
case MXC4005_REG_CONTROL:
return true;
@ -330,23 +343,20 @@ static int mxc4005_set_trigger_state(struct iio_trigger *trig,
{
struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
struct mxc4005_data *data = iio_priv(indio_dev);
unsigned int val;
int ret;
mutex_lock(&data->mutex);
if (state) {
ret = regmap_write(data->regmap, MXC4005_REG_INT_MASK1,
MXC4005_REG_INT_MASK1_BIT_DRDYE);
} else {
ret = regmap_write(data->regmap, MXC4005_REG_INT_MASK1,
~MXC4005_REG_INT_MASK1_BIT_DRDYE);
}
val = state ? MXC4005_REG_INT_MASK1_BIT_DRDYE : 0;
ret = regmap_write(data->regmap, MXC4005_REG_INT_MASK1, val);
if (ret < 0) {
mutex_unlock(&data->mutex);
dev_err(data->dev, "failed to update reg_int_mask1");
return ret;
}
data->int_mask1 = val;
data->trigger_enabled = state;
mutex_unlock(&data->mutex);
@ -382,6 +392,21 @@ static int mxc4005_chip_init(struct mxc4005_data *data)
dev_dbg(data->dev, "MXC4005 chip id %02x\n", reg);
ret = regmap_write(data->regmap, MXC4005_REG_INT_CLR1,
MXC4005_REG_INT_CLR1_SW_RST);
if (ret < 0)
return dev_err_probe(data->dev, ret, "resetting chip\n");
fsleep(MXC4005_RESET_TIME_US);
ret = regmap_write(data->regmap, MXC4005_REG_INT_MASK0, 0);
if (ret < 0)
return dev_err_probe(data->dev, ret, "writing INT_MASK0\n");
ret = regmap_write(data->regmap, MXC4005_REG_INT_MASK1, 0);
if (ret < 0)
return dev_err_probe(data->dev, ret, "writing INT_MASK1\n");
return 0;
}
@ -469,6 +494,58 @@ static int mxc4005_probe(struct i2c_client *client)
return devm_iio_device_register(&client->dev, indio_dev);
}
static int mxc4005_suspend(struct device *dev)
{
struct iio_dev *indio_dev = dev_get_drvdata(dev);
struct mxc4005_data *data = iio_priv(indio_dev);
int ret;
/* Save control to restore it on resume */
ret = regmap_read(data->regmap, MXC4005_REG_CONTROL, &data->control);
if (ret < 0)
dev_err(data->dev, "failed to read reg_control\n");
return ret;
}
static int mxc4005_resume(struct device *dev)
{
struct iio_dev *indio_dev = dev_get_drvdata(dev);
struct mxc4005_data *data = iio_priv(indio_dev);
int ret;
ret = regmap_write(data->regmap, MXC4005_REG_INT_CLR1,
MXC4005_REG_INT_CLR1_SW_RST);
if (ret) {
dev_err(data->dev, "failed to reset chip: %d\n", ret);
return ret;
}
fsleep(MXC4005_RESET_TIME_US);
ret = regmap_write(data->regmap, MXC4005_REG_CONTROL, data->control);
if (ret) {
dev_err(data->dev, "failed to restore control register\n");
return ret;
}
ret = regmap_write(data->regmap, MXC4005_REG_INT_MASK0, 0);
if (ret) {
dev_err(data->dev, "failed to restore interrupt 0 mask\n");
return ret;
}
ret = regmap_write(data->regmap, MXC4005_REG_INT_MASK1, data->int_mask1);
if (ret) {
dev_err(data->dev, "failed to restore interrupt 1 mask\n");
return ret;
}
return 0;
}
static DEFINE_SIMPLE_DEV_PM_OPS(mxc4005_pm_ops, mxc4005_suspend, mxc4005_resume);
static const struct acpi_device_id mxc4005_acpi_match[] = {
{"MXC4005", 0},
{"MXC6655", 0},
@ -496,6 +573,7 @@ static struct i2c_driver mxc4005_driver = {
.name = MXC4005_DRV_NAME,
.acpi_match_table = mxc4005_acpi_match,
.of_match_table = mxc4005_of_match,
.pm = pm_sleep_ptr(&mxc4005_pm_ops),
},
.probe = mxc4005_probe,
.id_table = mxc4005_id,

View File

@ -1289,6 +1289,7 @@ static int adis16475_config_sync_mode(struct adis16475 *st)
struct device *dev = &st->adis.spi->dev;
const struct adis16475_sync *sync;
u32 sync_mode;
u16 val;
/* default to internal clk */
st->clk_freq = st->info->int_clk * 1000;
@ -1350,8 +1351,9 @@ static int adis16475_config_sync_mode(struct adis16475 *st)
* I'm keeping this for simplicity and avoiding extra variables
* in chip_info.
*/
val = ADIS16475_SYNC_MODE(sync->sync_mode);
ret = __adis_update_bits(&st->adis, ADIS16475_REG_MSG_CTRL,
ADIS16475_SYNC_MODE_MASK, sync->sync_mode);
ADIS16475_SYNC_MODE_MASK, val);
if (ret)
return ret;

View File

@ -1233,6 +1233,7 @@ const struct bmp280_chip_info bmp380_chip_info = {
.chip_id = bmp380_chip_ids,
.num_chip_id = ARRAY_SIZE(bmp380_chip_ids),
.regmap_config = &bmp380_regmap_config,
.spi_read_extra_byte = true,
.start_up_time = 2000,
.channels = bmp380_channels,
.num_channels = 2,

View File

@ -96,15 +96,10 @@ static int bmp280_spi_probe(struct spi_device *spi)
chip_info = spi_get_device_match_data(spi);
switch (chip_info->chip_id[0]) {
case BMP380_CHIP_ID:
case BMP390_CHIP_ID:
if (chip_info->spi_read_extra_byte)
bmp_regmap_bus = &bmp380_regmap_bus;
break;
default:
else
bmp_regmap_bus = &bmp280_regmap_bus;
break;
}
regmap = devm_regmap_init(&spi->dev,
bmp_regmap_bus,
@ -127,7 +122,7 @@ static const struct of_device_id bmp280_of_spi_match[] = {
{ .compatible = "bosch,bmp180", .data = &bmp180_chip_info },
{ .compatible = "bosch,bmp181", .data = &bmp180_chip_info },
{ .compatible = "bosch,bmp280", .data = &bmp280_chip_info },
{ .compatible = "bosch,bme280", .data = &bmp280_chip_info },
{ .compatible = "bosch,bme280", .data = &bme280_chip_info },
{ .compatible = "bosch,bmp380", .data = &bmp380_chip_info },
{ .compatible = "bosch,bmp580", .data = &bmp580_chip_info },
{ },
@ -139,7 +134,7 @@ static const struct spi_device_id bmp280_spi_id[] = {
{ "bmp180", (kernel_ulong_t)&bmp180_chip_info },
{ "bmp181", (kernel_ulong_t)&bmp180_chip_info },
{ "bmp280", (kernel_ulong_t)&bmp280_chip_info },
{ "bme280", (kernel_ulong_t)&bmp280_chip_info },
{ "bme280", (kernel_ulong_t)&bme280_chip_info },
{ "bmp380", (kernel_ulong_t)&bmp380_chip_info },
{ "bmp580", (kernel_ulong_t)&bmp580_chip_info },
{ }

View File

@ -423,6 +423,7 @@ struct bmp280_chip_info {
int num_chip_id;
const struct regmap_config *regmap_config;
bool spi_read_extra_byte;
const struct iio_chan_spec *channels;
int num_channels;

View File

@ -439,6 +439,7 @@ static int remove_device_files(struct super_block *sb,
return PTR_ERR(dir);
}
simple_recursive_removal(dir, NULL);
dput(dir);
return 0;
}

View File

@ -208,6 +208,7 @@ static const struct xpad_device {
{ 0x0738, 0xcb29, "Saitek Aviator Stick AV8R02", 0, XTYPE_XBOX360 },
{ 0x0738, 0xf738, "Super SFIV FightStick TE S", 0, XTYPE_XBOX360 },
{ 0x07ff, 0xffff, "Mad Catz GamePad", 0, XTYPE_XBOX360 },
{ 0x0b05, 0x1a38, "ASUS ROG RAIKIRI", 0, XTYPE_XBOXONE },
{ 0x0c12, 0x0005, "Intec wireless", 0, XTYPE_XBOX },
{ 0x0c12, 0x8801, "Nyko Xbox Controller", 0, XTYPE_XBOX },
{ 0x0c12, 0x8802, "Zeroplus Xbox Controller", 0, XTYPE_XBOX },
@ -487,6 +488,7 @@ static const struct usb_device_id xpad_table[] = {
{ USB_DEVICE(0x0738, 0x4540) }, /* Mad Catz Beat Pad */
XPAD_XBOXONE_VENDOR(0x0738), /* Mad Catz FightStick TE 2 */
XPAD_XBOX360_VENDOR(0x07ff), /* Mad Catz Gamepad */
XPAD_XBOXONE_VENDOR(0x0b05), /* ASUS controllers */
XPAD_XBOX360_VENDOR(0x0c12), /* Zeroplus X-Box 360 controllers */
XPAD_XBOX360_VENDOR(0x0e6f), /* 0x0e6f Xbox 360 controllers */
XPAD_XBOXONE_VENDOR(0x0e6f), /* 0x0e6f Xbox One controllers */

View File

@ -132,7 +132,13 @@ static void __exit amimouse_remove(struct platform_device *pdev)
input_unregister_device(dev);
}
static struct platform_driver amimouse_driver = {
/*
* amimouse_remove() lives in .exit.text. For drivers registered via
* module_platform_driver_probe() this is ok because they cannot get unbound at
* runtime. So mark the driver struct with __refdata to prevent modpost
* triggering a section mismatch warning.
*/
static struct platform_driver amimouse_driver __refdata = {
.remove_new = __exit_p(amimouse_remove),
.driver = {
.name = "amiga-mouse",

View File

@ -115,6 +115,8 @@
#define MEI_DEV_ID_ARL_S 0x7F68 /* Arrow Lake Point S */
#define MEI_DEV_ID_ARL_H 0x7770 /* Arrow Lake Point H */
#define MEI_DEV_ID_LNL_M 0xA870 /* Lunar Lake Point M */
/*
* MEI HW Section
*/

View File

@ -122,6 +122,8 @@ static const struct pci_device_id mei_me_pci_tbl[] = {
{MEI_PCI_DEVICE(MEI_DEV_ID_ARL_S, MEI_ME_PCH15_CFG)},
{MEI_PCI_DEVICE(MEI_DEV_ID_ARL_H, MEI_ME_PCH15_CFG)},
{MEI_PCI_DEVICE(MEI_DEV_ID_LNL_M, MEI_ME_PCH15_CFG)},
/* required last entry */
{0, }
};

View File

@ -236,8 +236,11 @@ static int mei_pxp_component_match(struct device *dev, int subcomponent,
pdev = to_pci_dev(dev);
if (pdev->class != (PCI_CLASS_DISPLAY_VGA << 8) ||
pdev->vendor != PCI_VENDOR_ID_INTEL)
if (pdev->vendor != PCI_VENDOR_ID_INTEL)
return 0;
if (pdev->class != (PCI_CLASS_DISPLAY_VGA << 8) &&
pdev->class != (PCI_CLASS_DISPLAY_OTHER << 8))
return 0;
if (subcomponent != I915_COMPONENT_PXP)

View File

@ -44,8 +44,6 @@ static struct pci_driver pvpanic_pci_driver = {
.name = "pvpanic-pci",
.id_table = pvpanic_pci_id_tbl,
.probe = pvpanic_pci_probe,
.driver = {
.dev_groups = pvpanic_dev_groups,
},
.dev_groups = pvpanic_dev_groups,
};
module_pci_driver(pvpanic_pci_driver);

View File

@ -637,12 +637,12 @@ static void mv88e6351_phylink_get_caps(struct mv88e6xxx_chip *chip, int port,
MAC_1000FD;
}
static int mv88e6352_get_port4_serdes_cmode(struct mv88e6xxx_chip *chip)
static int mv88e63xx_get_port_serdes_cmode(struct mv88e6xxx_chip *chip, int port)
{
u16 reg, val;
int err;
err = mv88e6xxx_port_read(chip, 4, MV88E6XXX_PORT_STS, &reg);
err = mv88e6xxx_port_read(chip, port, MV88E6XXX_PORT_STS, &reg);
if (err)
return err;
@ -651,16 +651,16 @@ static int mv88e6352_get_port4_serdes_cmode(struct mv88e6xxx_chip *chip)
return 0xf;
val = reg & ~MV88E6XXX_PORT_STS_PHY_DETECT;
err = mv88e6xxx_port_write(chip, 4, MV88E6XXX_PORT_STS, val);
err = mv88e6xxx_port_write(chip, port, MV88E6XXX_PORT_STS, val);
if (err)
return err;
err = mv88e6xxx_port_read(chip, 4, MV88E6XXX_PORT_STS, &val);
err = mv88e6xxx_port_read(chip, port, MV88E6XXX_PORT_STS, &val);
if (err)
return err;
/* Restore PHY_DETECT value */
err = mv88e6xxx_port_write(chip, 4, MV88E6XXX_PORT_STS, reg);
err = mv88e6xxx_port_write(chip, port, MV88E6XXX_PORT_STS, reg);
if (err)
return err;
@ -688,7 +688,30 @@ static void mv88e6352_phylink_get_caps(struct mv88e6xxx_chip *chip, int port,
if (err <= 0)
return;
cmode = mv88e6352_get_port4_serdes_cmode(chip);
cmode = mv88e63xx_get_port_serdes_cmode(chip, port);
if (cmode < 0)
dev_err(chip->dev, "p%d: failed to read serdes cmode\n",
port);
else
mv88e6xxx_translate_cmode(cmode, supported);
}
}
static void mv88e632x_phylink_get_caps(struct mv88e6xxx_chip *chip, int port,
struct phylink_config *config)
{
unsigned long *supported = config->supported_interfaces;
int cmode;
/* Translate the default cmode */
mv88e6xxx_translate_cmode(chip->ports[port].cmode, supported);
config->mac_capabilities = MAC_SYM_PAUSE | MAC_10 | MAC_100 |
MAC_1000FD;
/* Port 0/1 are serdes only ports */
if (port == 0 || port == 1) {
cmode = mv88e63xx_get_port_serdes_cmode(chip, port);
if (cmode < 0)
dev_err(chip->dev, "p%d: failed to read serdes cmode\n",
port);
@ -5134,7 +5157,7 @@ static const struct mv88e6xxx_ops mv88e6320_ops = {
.gpio_ops = &mv88e6352_gpio_ops,
.avb_ops = &mv88e6352_avb_ops,
.ptp_ops = &mv88e6352_ptp_ops,
.phylink_get_caps = mv88e6185_phylink_get_caps,
.phylink_get_caps = mv88e632x_phylink_get_caps,
};
static const struct mv88e6xxx_ops mv88e6321_ops = {
@ -5182,7 +5205,7 @@ static const struct mv88e6xxx_ops mv88e6321_ops = {
.gpio_ops = &mv88e6352_gpio_ops,
.avb_ops = &mv88e6352_avb_ops,
.ptp_ops = &mv88e6352_ptp_ops,
.phylink_get_caps = mv88e6185_phylink_get_caps,
.phylink_get_caps = mv88e632x_phylink_get_caps,
};
static const struct mv88e6xxx_ops mv88e6341_ops = {

View File

@ -910,7 +910,7 @@ struct hnae3_handle {
struct hnae3_roce_private_info rinfo;
};
u32 numa_node_mask; /* for multi-chip support */
nodemask_t numa_node_mask; /* for multi-chip support */
enum hnae3_port_base_vlan_state port_base_vlan_state;

View File

@ -1581,6 +1581,9 @@ static int hclge_configure(struct hclge_dev *hdev)
cfg.default_speed, ret);
return ret;
}
hdev->hw.mac.req_speed = hdev->hw.mac.speed;
hdev->hw.mac.req_autoneg = AUTONEG_ENABLE;
hdev->hw.mac.req_duplex = DUPLEX_FULL;
hclge_parse_link_mode(hdev, cfg.speed_ability);
@ -1810,7 +1813,8 @@ static int hclge_vport_setup(struct hclge_vport *vport, u16 num_tqps)
nic->pdev = hdev->pdev;
nic->ae_algo = &ae_algo;
nic->numa_node_mask = hdev->numa_node_mask;
bitmap_copy(nic->numa_node_mask.bits, hdev->numa_node_mask.bits,
MAX_NUMNODES);
nic->kinfo.io_base = hdev->hw.hw.io_base;
ret = hclge_knic_setup(vport, num_tqps,
@ -2502,7 +2506,8 @@ static int hclge_init_roce_base_info(struct hclge_vport *vport)
roce->pdev = nic->pdev;
roce->ae_algo = nic->ae_algo;
roce->numa_node_mask = nic->numa_node_mask;
bitmap_copy(roce->numa_node_mask.bits, nic->numa_node_mask.bits,
MAX_NUMNODES);
return 0;
}
@ -3386,9 +3391,9 @@ hclge_set_phy_link_ksettings(struct hnae3_handle *handle,
return ret;
}
hdev->hw.mac.autoneg = cmd->base.autoneg;
hdev->hw.mac.speed = cmd->base.speed;
hdev->hw.mac.duplex = cmd->base.duplex;
hdev->hw.mac.req_autoneg = cmd->base.autoneg;
hdev->hw.mac.req_speed = cmd->base.speed;
hdev->hw.mac.req_duplex = cmd->base.duplex;
linkmode_copy(hdev->hw.mac.advertising, cmd->link_modes.advertising);
return 0;
@ -3421,9 +3426,9 @@ static int hclge_tp_port_init(struct hclge_dev *hdev)
if (!hnae3_dev_phy_imp_supported(hdev))
return 0;
cmd.base.autoneg = hdev->hw.mac.autoneg;
cmd.base.speed = hdev->hw.mac.speed;
cmd.base.duplex = hdev->hw.mac.duplex;
cmd.base.autoneg = hdev->hw.mac.req_autoneg;
cmd.base.speed = hdev->hw.mac.req_speed;
cmd.base.duplex = hdev->hw.mac.req_duplex;
linkmode_copy(cmd.link_modes.advertising, hdev->hw.mac.advertising);
return hclge_set_phy_link_ksettings(&hdev->vport->nic, &cmd);
@ -8008,8 +8013,7 @@ static void hclge_set_timer_task(struct hnae3_handle *handle, bool enable)
/* Set the DOWN flag here to disable link updating */
set_bit(HCLGE_STATE_DOWN, &hdev->state);
/* flush memory to make sure DOWN is seen by service task */
smp_mb__before_atomic();
smp_mb__after_atomic(); /* flush memory to make sure DOWN is seen by service task */
hclge_flush_link_update(hdev);
}
}
@ -9962,6 +9966,7 @@ static int hclge_set_vlan_protocol_type(struct hclge_dev *hdev)
static int hclge_init_vlan_filter(struct hclge_dev *hdev)
{
struct hclge_vport *vport;
bool enable = true;
int ret;
int i;
@ -9981,8 +9986,12 @@ static int hclge_init_vlan_filter(struct hclge_dev *hdev)
vport->cur_vlan_fltr_en = true;
}
if (test_bit(HNAE3_DEV_SUPPORT_VLAN_FLTR_MDF_B, hdev->ae_dev->caps) &&
!test_bit(HNAE3_DEV_SUPPORT_PORT_VLAN_BYPASS_B, hdev->ae_dev->caps))
enable = false;
return hclge_set_vlan_filter_ctrl(hdev, HCLGE_FILTER_TYPE_PORT,
HCLGE_FILTER_FE_INGRESS, true, 0);
HCLGE_FILTER_FE_INGRESS, enable, 0);
}
static int hclge_init_vlan_type(struct hclge_dev *hdev)
@ -11696,16 +11705,10 @@ static int hclge_init_ae_dev(struct hnae3_ae_dev *ae_dev)
if (ret)
goto out;
ret = hclge_devlink_init(hdev);
if (ret)
goto err_pci_uninit;
devl_lock(hdev->devlink);
/* Firmware command queue initialize */
ret = hclge_comm_cmd_queue_init(hdev->pdev, &hdev->hw.hw);
if (ret)
goto err_devlink_uninit;
goto err_pci_uninit;
/* Firmware command initialize */
hclge_comm_cmd_init_ops(&hdev->hw.hw, &hclge_cmq_ops);
@ -11834,7 +11837,7 @@ static int hclge_init_ae_dev(struct hnae3_ae_dev *ae_dev)
ret = hclge_update_port_info(hdev);
if (ret)
goto err_mdiobus_unreg;
goto err_ptp_uninit;
INIT_KFIFO(hdev->mac_tnl_log);
@ -11874,6 +11877,10 @@ static int hclge_init_ae_dev(struct hnae3_ae_dev *ae_dev)
dev_warn(&pdev->dev,
"failed to wake on lan init, ret = %d\n", ret);
ret = hclge_devlink_init(hdev);
if (ret)
goto err_ptp_uninit;
hclge_state_init(hdev);
hdev->last_reset_time = jiffies;
@ -11881,10 +11888,10 @@ static int hclge_init_ae_dev(struct hnae3_ae_dev *ae_dev)
HCLGE_DRIVER_NAME);
hclge_task_schedule(hdev, round_jiffies_relative(HZ));
devl_unlock(hdev->devlink);
return 0;
err_ptp_uninit:
hclge_ptp_uninit(hdev);
err_mdiobus_unreg:
if (hdev->hw.mac.phydev)
mdiobus_unregister(hdev->hw.mac.mdio_bus);
@ -11894,9 +11901,6 @@ err_msi_uninit:
pci_free_irq_vectors(pdev);
err_cmd_uninit:
hclge_comm_cmd_uninit(hdev->ae_dev, &hdev->hw.hw);
err_devlink_uninit:
devl_unlock(hdev->devlink);
hclge_devlink_uninit(hdev);
err_pci_uninit:
pcim_iounmap(pdev, hdev->hw.hw.io_base);
pci_release_regions(pdev);

Some files were not shown because too many files have changed in this diff Show More