Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-10 22:21:40 +00:00
Code Issues Packages Projects Releases Wiki Activity

[POWERPC] Remove APUS support from arch/ppc

Browse Source 
Current status of APUS:
- arch/powerpc/: removed in 2.6.23
- arch/ppc/: marked BROKEN since 2 years

This therefore removes the remaining parts of APUS support from
arch/ppc, include/asm-ppc, arch/powerpc and include/asm-powerpc.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
This commit is contained in:
Adrian Bunk 2007-08-27 23:29:53 +02:00 committed by Paul Mackerras
parent 8237bf080e
commit e6b6e3ffb9
32 changed files with 12 additions and 4364 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

148
arch/ppc/Kconfig
View File

@ -573,24 +573,9 @@ choice
Select PReP if configuring for a PReP machine.
Select Gemini if configuring for a Synergy Microsystems' Gemini
series Single Board Computer. More information is available at:
<http://www.synergymicro.com/PressRel/97_10_15.html>.
Select APUS if configuring for a PowerUP Amiga. More information is
available at: <http://linux-apus.sourceforge.net/>.
config PPC_PREP
bool "PReP"
config APUS
bool "Amiga-APUS"
depends on BROKEN
help
Select APUS if configuring for a PowerUP Amiga.
More information is available at:
<http://linux-apus.sourceforge.net/>.
config KATANA
bool "Artesyn-Katana"
help
@ -1027,132 +1012,6 @@ config CMDLINE
some command-line options at build time by entering them here. In
most cases you will need to specify the root device here.
config AMIGA
bool
depends on APUS
default y
help
This option enables support for the Amiga series of computers.
config ZORRO
bool
depends on APUS
default y
help
This enables support for the Zorro bus in the Amiga. If you have
expansion cards in your Amiga that conform to the Amiga
AutoConfig(tm) specification, say Y, otherwise N. Note that even
expansion cards that do not fit in the Zorro slots but fit in e.g.
the CPU slot may fall in this category, so you have to say Y to let
Linux use these.
config ABSTRACT_CONSOLE
bool
depends on APUS
default y
config APUS_FAST_EXCEPT
bool
depends on APUS
default y
config AMIGA_PCMCIA
bool "Amiga 1200/600 PCMCIA support"
depends on APUS && EXPERIMENTAL
help
Include support in the kernel for pcmcia on Amiga 1200 and Amiga
600. If you intend to use pcmcia cards say Y; otherwise say N.
config AMIGA_BUILTIN_SERIAL
tristate "Amiga builtin serial support"
depends on APUS
help
If you want to use your Amiga's built-in serial port in Linux,
answer Y.
To compile this driver as a module, choose M here.
config GVPIOEXT
tristate "GVP IO-Extender support"
depends on APUS
help
If you want to use a GVP IO-Extender serial card in Linux, say Y.
Otherwise, say N.
config GVPIOEXT_LP
tristate "GVP IO-Extender parallel printer support"
depends on GVPIOEXT
help
Say Y to enable driving a printer from the parallel port on your
GVP IO-Extender card, N otherwise.
config GVPIOEXT_PLIP
tristate "GVP IO-Extender PLIP support"
depends on GVPIOEXT
help
Say Y to enable doing IP over the parallel port on your GVP
IO-Extender card, N otherwise.
config MULTIFACE_III_TTY
tristate "Multiface Card III serial support"
depends on APUS
help
If you want to use a Multiface III card's serial port in Linux,
answer Y.
To compile this driver as a module, choose M here.
config A2232
tristate "Commodore A2232 serial support (EXPERIMENTAL)"
depends on EXPERIMENTAL && APUS
---help---
This option supports the 2232 7-port serial card shipped with the
Amiga 2000 and other Zorro-bus machines, dating from 1989. At
a max of 19,200 bps, the ports are served by a 6551 ACIA UART chip
each, plus a 8520 CIA, and a master 6502 CPU and buffer as well. The
ports were connected with 8 pin DIN connectors on the card bracket,
for which 8 pin to DB25 adapters were supplied. The card also had
jumpers internally to toggle various pinning configurations.
This driver can be built as a module; but then "generic_serial"
will also be built as a module. This has to be loaded before
"ser_a2232". If you want to do this, answer M here.
config WHIPPET_SERIAL
tristate "Hisoft Whippet PCMCIA serial support"
depends on AMIGA_PCMCIA
help
HiSoft has a web page at <http://www.hisoft.co.uk/>, but there
is no listing for the Whippet in their Amiga section.
config APNE
tristate "PCMCIA NE2000 support"
depends on AMIGA_PCMCIA
help
If you have a PCMCIA NE2000 compatible adapter, say Y. Otherwise,
say N.
To compile this driver as a module, choose M here: the
module will be called apne.
config SERIAL_CONSOLE
bool "Support for serial port console"
depends on APUS && (AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y)
config HEARTBEAT
bool "Use power LED as a heartbeat"
depends on APUS
help
Use the power-on LED on your machine as a load meter. The exact
behavior is platform-dependent, but normally the flash frequency is
a hyperbolic function of the 5-minute load average.
config PROC_HARDWARE
bool "/proc/hardware support"
depends on APUS
source "drivers/zorro/Kconfig"
if !44x || BROKEN
source kernel/power/Kconfig
endif
@ -1227,8 +1086,7 @@ config MCA
config PCI
bool "PCI support" if 40x || CPM2 || 83xx || 85xx || PPC_MPC52xx
default y if !40x && !CPM2 && !8xx && !APUS && !83xx && !85xx
default PCI_PERMEDIA if !4xx && !CPM2 && !8xx && APUS
default y if !40x && !CPM2 && !8xx && !83xx && !85xx
default PCI_QSPAN if !4xx && !CPM2 && 8xx
help
Find out whether your system includes a PCI bus. PCI is the name of
@ -1284,10 +1142,6 @@ config 8260_PCI9_IDMA4
endchoice
config PCI_PERMEDIA
bool "PCI for Permedia2"
depends on !4xx && !8xx && APUS
source "drivers/pci/Kconfig"
source "drivers/pcmcia/Kconfig"

1
arch/ppc/Makefile
View File

@ -69,7 +69,6 @@ core-$(CONFIG_83xx) += arch/ppc/platforms/83xx/
core-$(CONFIG_85xx) += arch/ppc/platforms/85xx/
core-$(CONFIG_MATH_EMULATION) += arch/powerpc/math-emu/
core-$(CONFIG_XMON) += arch/ppc/xmon/
core-$(CONFIG_APUS) += arch/ppc/amiga/
drivers-$(CONFIG_8xx) += arch/ppc/8xx_io/
drivers-$(CONFIG_4xx) += arch/ppc/4xx_io/
drivers-$(CONFIG_CPM2) += arch/ppc/8260_io/

8
arch/ppc/amiga/Makefile
View File

@ -1,8 +0,0 @@
#
# Makefile for Linux arch/m68k/amiga source directory
#
obj-y := config.o amiints.o cia.o time.o bootinfo.o amisound.o \
chipram.o amiga_ksyms.o
obj-$(CONFIG_AMIGA_PCMCIA) += pcmcia.o

1
arch/ppc/amiga/amiga_ksyms.c
View File

@ -1 +0,0 @@
#include "../../m68k/amiga/amiga_ksyms.c"

322
arch/ppc/amiga/amiints.c
View File

@ -1,322 +0,0 @@
/*
* Amiga Linux interrupt handling code
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive
* for more details.
*
* 11/07/96: rewritten interrupt handling, irq lists are exists now only for
* this sources where it makes sense (VERTB/PORTS/EXTER) and you must
* be careful that dev_id for this sources is unique since this the
* only possibility to distinguish between different handlers for
* free_irq. irq lists also have different irq flags:
* - IRQ_FLG_FAST: handler is inserted at top of list (after other
* fast handlers)
* - IRQ_FLG_SLOW: handler is inserted at bottom of list and before
* they're executed irq level is set to the previous
* one, but handlers don't need to be reentrant, if
* reentrance occurred, slow handlers will be just
* called again.
* The whole interrupt handling for CIAs is moved to cia.c
* /Roman Zippel
*
* 07/08/99: rewamp of the interrupt handling - we now have two types of
* interrupts, normal and fast handlers, fast handlers being
* marked with SA_INTERRUPT and runs with all other interrupts
* disabled. Normal interrupts disable their own source but
* run with all other interrupt sources enabled.
* PORTS and EXTER interrupts are always shared even if the
* drivers do not explicitly mark this when calling
* request_irq which they really should do.
* This is similar to the way interrupts are handled on all
* other architectures and makes a ton of sense besides
* having the advantage of making it easier to share
* drivers.
* /Jes
*/
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/kernel_stat.h>
#include <linux/init.h>
#include <asm/system.h>
#include <asm/irq.h>
#include <asm/traps.h>
#include <asm/amigahw.h>
#include <asm/amigaints.h>
#include <asm/amipcmcia.h>
#ifdef CONFIG_APUS
#include <asm/amigappc.h>
#endif
extern void cia_init_IRQ(struct ciabase *base);
unsigned short ami_intena_vals[AMI_STD_IRQS] = {
IF_VERTB, IF_COPER, IF_AUD0, IF_AUD1, IF_AUD2, IF_AUD3, IF_BLIT,
IF_DSKSYN, IF_DSKBLK, IF_RBF, IF_TBE, IF_SOFT, IF_PORTS, IF_EXTER
};
static const unsigned char ami_servers[AMI_STD_IRQS] = {
1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1
};
static short ami_ablecount[AMI_IRQS];
static void ami_badint(int irq, void *dev_id, struct pt_regs *fp)
{
/* num_spurious += 1;*/
}
/*
* void amiga_init_IRQ(void)
*
* Parameters: None
*
* Returns: Nothing
*
* This function should be called during kernel startup to initialize
* the amiga IRQ handling routines.
*/
__init
void amiga_init_IRQ(void)
{
int i;
for (i = 0; i < AMI_IRQS; i++)
ami_ablecount[i] = 0;
/* turn off PCMCIA interrupts */
if (AMIGAHW_PRESENT(PCMCIA))
gayle.inten = GAYLE_IRQ_IDE;
/* turn off all interrupts... */
amiga_custom.intena = 0x7fff;
amiga_custom.intreq = 0x7fff;
#ifdef CONFIG_APUS
/* Clear any inter-CPU interrupt requests. Circumvents bug in
Blizzard IPL emulation HW (or so it appears). */
APUS_WRITE(APUS_INT_LVL, INTLVL_SETRESET | INTLVL_MASK);
/* Init IPL emulation. */
APUS_WRITE(APUS_REG_INT, REGINT_INTMASTER | REGINT_ENABLEIPL);
APUS_WRITE(APUS_IPL_EMU, IPLEMU_DISABLEINT);
APUS_WRITE(APUS_IPL_EMU, IPLEMU_SETRESET | IPLEMU_IPLMASK);
#endif
/* ... and enable the master interrupt bit */
amiga_custom.intena = IF_SETCLR | IF_INTEN;
cia_init_IRQ(&ciaa_base);
cia_init_IRQ(&ciab_base);
}
/*
* Enable/disable a particular machine specific interrupt source.
* Note that this may affect other interrupts in case of a shared interrupt.
* This function should only be called for a _very_ short time to change some
* internal data, that may not be changed by the interrupt at the same time.
* ami_(enable|disable)_irq calls may also be nested.
*/
void amiga_enable_irq(unsigned int irq)
{
if (irq >= AMI_IRQS) {
printk("%s: Unknown IRQ %d\n", __FUNCTION__, irq);
return;
}
ami_ablecount[irq]--;
if (ami_ablecount[irq]<0)
ami_ablecount[irq]=0;
else if (ami_ablecount[irq])
return;
/* No action for auto-vector interrupts */
if (irq >= IRQ_AMIGA_AUTO){
printk("%s: Trying to enable auto-vector IRQ %i\n",
__FUNCTION__, irq - IRQ_AMIGA_AUTO);
return;
}
if (irq >= IRQ_AMIGA_CIAA) {
cia_set_irq(irq, 0);
cia_able_irq(irq, 1);
return;
}
/* enable the interrupt */
amiga_custom.intena = IF_SETCLR | ami_intena_vals[irq];
}
void amiga_disable_irq(unsigned int irq)
{
if (irq >= AMI_IRQS) {
printk("%s: Unknown IRQ %d\n", __FUNCTION__, irq);
return;
}
if (ami_ablecount[irq]++)
return;
/* No action for auto-vector interrupts */
if (irq >= IRQ_AMIGA_AUTO) {
printk("%s: Trying to disable auto-vector IRQ %i\n",
__FUNCTION__, irq - IRQ_AMIGA_AUTO);
return;
}
if (irq >= IRQ_AMIGA_CIAA) {
cia_able_irq(irq, 0);
return;
}
/* disable the interrupt */
amiga_custom.intena = ami_intena_vals[irq];
}
inline void amiga_do_irq(int irq, struct pt_regs *fp)
{
irq_desc_t *desc = irq_desc + irq;
struct irqaction *action = desc->action;
kstat_cpu(0).irqs[irq]++;
action->handler(irq, action->dev_id, fp);
}
void amiga_do_irq_list(int irq, struct pt_regs *fp)
{
irq_desc_t *desc = irq_desc + irq;
struct irqaction *action;
kstat_cpu(0).irqs[irq]++;
amiga_custom.intreq = ami_intena_vals[irq];
for (action = desc->action; action; action = action->next)
action->handler(irq, action->dev_id, fp);
}
/*
* The builtin Amiga hardware interrupt handlers.
*/
static void ami_int1(int irq, void *dev_id, struct pt_regs *fp)
{
unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar;
/* if serial transmit buffer empty, interrupt */
if (ints & IF_TBE) {
amiga_custom.intreq = IF_TBE;
amiga_do_irq(IRQ_AMIGA_TBE, fp);
}
/* if floppy disk transfer complete, interrupt */
if (ints & IF_DSKBLK) {
amiga_custom.intreq = IF_DSKBLK;
amiga_do_irq(IRQ_AMIGA_DSKBLK, fp);
}
/* if software interrupt set, interrupt */
if (ints & IF_SOFT) {
amiga_custom.intreq = IF_SOFT;
amiga_do_irq(IRQ_AMIGA_SOFT, fp);
}
}
static void ami_int3(int irq, void *dev_id, struct pt_regs *fp)
{
unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar;
/* if a blitter interrupt */
if (ints & IF_BLIT) {
amiga_custom.intreq = IF_BLIT;
amiga_do_irq(IRQ_AMIGA_BLIT, fp);
}
/* if a copper interrupt */
if (ints & IF_COPER) {
amiga_custom.intreq = IF_COPER;
amiga_do_irq(IRQ_AMIGA_COPPER, fp);
}
/* if a vertical blank interrupt */
if (ints & IF_VERTB)
amiga_do_irq_list(IRQ_AMIGA_VERTB, fp);
}
static void ami_int4(int irq, void *dev_id, struct pt_regs *fp)
{
unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar;
/* if audio 0 interrupt */
if (ints & IF_AUD0) {
amiga_custom.intreq = IF_AUD0;
amiga_do_irq(IRQ_AMIGA_AUD0, fp);
}
/* if audio 1 interrupt */
if (ints & IF_AUD1) {
amiga_custom.intreq = IF_AUD1;
amiga_do_irq(IRQ_AMIGA_AUD1, fp);
}
/* if audio 2 interrupt */
if (ints & IF_AUD2) {
amiga_custom.intreq = IF_AUD2;
amiga_do_irq(IRQ_AMIGA_AUD2, fp);
}
/* if audio 3 interrupt */
if (ints & IF_AUD3) {
amiga_custom.intreq = IF_AUD3;
amiga_do_irq(IRQ_AMIGA_AUD3, fp);
}
}
static void ami_int5(int irq, void *dev_id, struct pt_regs *fp)
{
unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar;
/* if serial receive buffer full interrupt */
if (ints & IF_RBF) {
/* acknowledge of IF_RBF must be done by the serial interrupt */
amiga_do_irq(IRQ_AMIGA_RBF, fp);
}
/* if a disk sync interrupt */
if (ints & IF_DSKSYN) {
amiga_custom.intreq = IF_DSKSYN;
amiga_do_irq(IRQ_AMIGA_DSKSYN, fp);
}
}
static void ami_int7(int irq, void *dev_id, struct pt_regs *fp)
{
panic ("level 7 interrupt received\n");
}
#ifdef CONFIG_APUS
/* The PPC irq handling links all handlers requested on the same vector
and executes them in a loop. Having ami_badint at the end of the chain
is a bad idea. */
struct irqaction amiga_sys_irqaction[AUTO_IRQS] = {
{ .handler = ami_badint, .name = "spurious int" },
{ .handler = ami_int1, .name = "int1 handler" },
{ 0, /* CIAA */ },
{ .handler = ami_int3, .name = "int3 handler" },
{ .handler = ami_int4, .name = "int4 handler" },
{ .handler = ami_int5, .name = "int5 handler" },
{ 0, /* CIAB */ },
{ .handler = ami_int7, .name = "int7 handler" },
};
#else
void (*amiga_default_handler[SYS_IRQS])(int, void *, struct pt_regs *) = {
ami_badint, ami_int1, ami_badint, ami_int3,
ami_int4, ami_int5, ami_badint, ami_int7
};
#endif

1
arch/ppc/amiga/amisound.c
View File

@ -1 +0,0 @@
#include "../../m68k/amiga/amisound.c"

78
arch/ppc/amiga/bootinfo.c
View File

@ -1,78 +0,0 @@
/*
* Extracted from arch/m68k/kernel/setup.c.
* Should be properly generalized and put somewhere else.
* Jesper
*/
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/init.h>
#include <asm/setup.h>
#include <asm/bootinfo.h>
extern char cmd_line[CL_SIZE];
extern int num_memory;
extern int m68k_realnum_memory;
extern struct mem_info memory[NUM_MEMINFO];
extern struct mem_info m68k_memory[NUM_MEMINFO];
extern struct mem_info ramdisk;
extern int amiga_parse_bootinfo(const struct bi_record *);
extern int atari_parse_bootinfo(const struct bi_record *);
extern int mac_parse_bootinfo(const struct bi_record *);
void __init parse_bootinfo(const struct bi_record *record)
{
while (record->tag != BI_LAST) {
int unknown = 0;
const u_long *data = record->data;
switch (record->tag) {
case BI_MACHTYPE:
case BI_CPUTYPE:
case BI_FPUTYPE:
case BI_MMUTYPE:
/* Already set up by head.S */
break;
case BI_MEMCHUNK:
if (num_memory < NUM_MEMINFO) {
memory[num_memory].addr = data[0];
memory[num_memory].size = data[1];
num_memory++;
/* FIXME: duplicate for m68k drivers. */
m68k_memory[m68k_realnum_memory].addr = data[0];
m68k_memory[m68k_realnum_memory].size = data[1];
m68k_realnum_memory++;
} else
printk("parse_bootinfo: too many memory chunks\n");
break;
case BI_RAMDISK:
ramdisk.addr = data[0];
ramdisk.size = data[1];
break;
case BI_COMMAND_LINE:
strlcpy(cmd_line, (const char *)data, sizeof(cmd_line));
break;
default:
if (MACH_IS_AMIGA)
unknown = amiga_parse_bootinfo(record);
else if (MACH_IS_ATARI)
unknown = atari_parse_bootinfo(record);
else if (MACH_IS_MAC)
unknown = mac_parse_bootinfo(record);
else
unknown = 1;
}
if (unknown)
printk("parse_bootinfo: unknown tag 0x%04x ignored\n",
record->tag);
record = (struct bi_record *)((u_long)record+record->size);
}
}

1
arch/ppc/amiga/chipram.c
View File

@ -1 +0,0 @@
#include "../../m68k/amiga/chipram.c"

176
arch/ppc/amiga/cia.c
View File

@ -1,176 +0,0 @@
/*
* Copyright (C) 1996 Roman Zippel
*
* The concept of some functions bases on the original Amiga OS function
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive
* for more details.
*/
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/kernel_stat.h>
#include <linux/init.h>
#include <asm/irq.h>
#include <asm/amigahw.h>
#include <asm/amigaints.h>
struct ciabase {
volatile struct CIA *cia;
u_char icr_mask, icr_data;
u_short int_mask;
int handler_irq, cia_irq, server_irq;
char *name;
} ciaa_base = {
&ciaa, 0, 0, IF_PORTS,
IRQ_AMIGA_AUTO_2, IRQ_AMIGA_CIAA,
IRQ_AMIGA_PORTS,
"CIAA handler"
}, ciab_base = {
&ciab, 0, 0, IF_EXTER,
IRQ_AMIGA_AUTO_6, IRQ_AMIGA_CIAB,
IRQ_AMIGA_EXTER,
"CIAB handler"
};
#define CIA_SET_BASE_ADJUST_IRQ(base, irq) \
do { \
if (irq >= IRQ_AMIGA_CIAB) { \
base = &ciab_base; \
irq -= IRQ_AMIGA_CIAB; \
} else { \
base = &ciaa_base; \
irq -= IRQ_AMIGA_CIAA; \
} \
} while (0)
/*
* Cause or clear CIA interrupts, return old interrupt status.
*/
static unsigned char cia_set_irq_private(struct ciabase *base,
unsigned char mask)
{
u_char old;
old = (base->icr_data |= base->cia->icr);
if (mask & CIA_ICR_SETCLR)
base->icr_data |= mask;
else
base->icr_data &= ~mask;
if (base->icr_data & base->icr_mask)
amiga_custom.intreq = IF_SETCLR | base->int_mask;
return old & base->icr_mask;
}
unsigned char cia_set_irq(unsigned int irq, int set)
{
struct ciabase *base;
unsigned char mask;
if (irq >= IRQ_AMIGA_CIAB)
mask = (1 << (irq - IRQ_AMIGA_CIAB));
else
mask = (1 << (irq - IRQ_AMIGA_CIAA));
mask |= (set) ? CIA_ICR_SETCLR : 0;
CIA_SET_BASE_ADJUST_IRQ(base, irq);
return cia_set_irq_private(base, mask);
}
unsigned char cia_get_irq_mask(unsigned int irq)
{
struct ciabase *base;
CIA_SET_BASE_ADJUST_IRQ(base, irq);
return base->cia->icr;
}
/*
* Enable or disable CIA interrupts, return old interrupt mask.
*/
static unsigned char cia_able_irq_private(struct ciabase *base,
unsigned char mask)
{
u_char old;
old = base->icr_mask;
base->icr_data |= base->cia->icr;
base->cia->icr = mask;
if (mask & CIA_ICR_SETCLR)
base->icr_mask |= mask;
else
base->icr_mask &= ~mask;
base->icr_mask &= CIA_ICR_ALL;
if (base->icr_data & base->icr_mask)
amiga_custom.intreq = IF_SETCLR | base->int_mask;
return old;
}
unsigned char cia_able_irq(unsigned int irq, int enable)
{
struct ciabase *base;
unsigned char mask;
if (irq >= IRQ_AMIGA_CIAB)
mask = (1 << (irq - IRQ_AMIGA_CIAB));
else
mask = (1 << (irq - IRQ_AMIGA_CIAA));
mask |= (enable) ? CIA_ICR_SETCLR : 0;
CIA_SET_BASE_ADJUST_IRQ(base, irq);
return cia_able_irq_private(base, mask);
}
static void cia_handler(int irq, void *dev_id, struct pt_regs *fp)
{
struct ciabase *base = (struct ciabase *)dev_id;
irq_desc_t *desc;
struct irqaction *action;
int i;
unsigned char ints;
irq = base->cia_irq;
desc = irq_desc + irq;
ints = cia_set_irq_private(base, CIA_ICR_ALL);
amiga_custom.intreq = base->int_mask;
for (i = 0; i < CIA_IRQS; i++, irq++) {
if (ints & 1) {
kstat_cpu(0).irqs[irq]++;
action = desc->action;
action->handler(irq, action->dev_id, fp);
}
ints >>= 1;
desc++;
}
amiga_do_irq_list(base->server_irq, fp);
}
void __init cia_init_IRQ(struct ciabase *base)
{
extern struct irqaction amiga_sys_irqaction[AUTO_IRQS];
struct irqaction *action;
/* clear any pending interrupt and turn off all interrupts */
cia_set_irq_private(base, CIA_ICR_ALL);
cia_able_irq_private(base, CIA_ICR_ALL);
/* install CIA handler */
action = &amiga_sys_irqaction[base->handler_irq-IRQ_AMIGA_AUTO];
action->handler = cia_handler;
action->dev_id = base;
action->name = base->name;
setup_irq(base->handler_irq, &amiga_sys_irqaction[base->handler_irq-IRQ_AMIGA_AUTO]);
amiga_custom.intena = IF_SETCLR | base->int_mask;
}

953
arch/ppc/amiga/config.c
View File

@ -1,953 +0,0 @@
#define m68k_debug_device debug_device
/*
* Copyright (C) 1993 Hamish Macdonald
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive
* for more details.
*/
/*
* Miscellaneous Amiga stuff
*/
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/kd.h>
#include <linux/tty.h>
#include <linux/console.h>
#include <linux/init.h>
#ifdef CONFIG_ZORRO
#include <linux/zorro.h>
#endif
#include <asm/bootinfo.h>
#include <asm/setup.h>
#include <asm/system.h>
#include <asm/pgtable.h>
#include <asm/amigahw.h>
#include <asm/amigaints.h>
#include <asm/irq.h>
#include <asm/machdep.h>
#include <asm/io.h>
unsigned long powerup_PCI_present;
unsigned long powerup_BPPCPLUS_present;
unsigned long amiga_model;
unsigned long amiga_eclock;
unsigned long amiga_masterclock;
unsigned long amiga_colorclock;
unsigned long amiga_chipset;
unsigned char amiga_vblank;
unsigned char amiga_psfreq;
struct amiga_hw_present amiga_hw_present;
static char s_a500[] __initdata = "A500";
static char s_a500p[] __initdata = "A500+";
static char s_a600[] __initdata = "A600";
static char s_a1000[] __initdata = "A1000";
static char s_a1200[] __initdata = "A1200";
static char s_a2000[] __initdata = "A2000";
static char s_a2500[] __initdata = "A2500";
static char s_a3000[] __initdata = "A3000";
static char s_a3000t[] __initdata = "A3000T";
static char s_a3000p[] __initdata = "A3000+";
static char s_a4000[] __initdata = "A4000";
static char s_a4000t[] __initdata = "A4000T";
static char s_cdtv[] __initdata = "CDTV";
static char s_cd32[] __initdata = "CD32";
static char s_draco[] __initdata = "Draco";
static char *amiga_models[] __initdata = {
s_a500, s_a500p, s_a600, s_a1000, s_a1200, s_a2000, s_a2500, s_a3000,
s_a3000t, s_a3000p, s_a4000, s_a4000t, s_cdtv, s_cd32, s_draco,
};
static char amiga_model_name[13] = "Amiga ";
extern char m68k_debug_device[];
static void amiga_sched_init(irqreturn_t (*handler)(int, void *, struct pt_regs *));
/* amiga specific irq functions */
extern void amiga_init_IRQ (void);
extern void (*amiga_default_handler[]) (int, void *, struct pt_regs *);
extern int amiga_request_irq (unsigned int irq,
void (*handler)(int, void *, struct pt_regs *),
unsigned long flags, const char *devname,
void *dev_id);
extern void amiga_free_irq (unsigned int irq, void *dev_id);
extern void amiga_enable_irq (unsigned int);
extern void amiga_disable_irq (unsigned int);
static void amiga_get_model(char *model);
static int amiga_get_hardware_list(char *buffer);
/* amiga specific timer functions */
static unsigned long amiga_gettimeoffset (void);
static void a3000_gettod (int *, int *, int *, int *, int *, int *);
static void a2000_gettod (int *, int *, int *, int *, int *, int *);
static int amiga_hwclk (int, struct hwclk_time *);
static int amiga_set_clock_mmss (unsigned long);
static void amiga_reset (void);
extern void amiga_init_sound(void);
static void amiga_savekmsg_init(void);
static void amiga_mem_console_write(struct console *co, const char *b,
unsigned int count);
void amiga_serial_console_write(struct console *co, const char *s,
unsigned int count);
static void amiga_debug_init(void);
#ifdef CONFIG_HEARTBEAT
static void amiga_heartbeat(int on);
#endif
static struct console amiga_console_driver = {
.name = "debug",
.flags = CON_PRINTBUFFER,
.index = -1,
};
/*
* Motherboard Resources present in all Amiga models
*/
static struct {
struct resource _ciab, _ciaa, _custom, _kickstart;
} mb_resources = {
// { "Ranger Memory", 0x00c00000, 0x00c7ffff },
._ciab = { "CIA B", 0x00bfd000, 0x00bfdfff },
._ciaa = { "CIA A", 0x00bfe000, 0x00bfefff },
._custom = { "Custom I/O", 0x00dff000, 0x00dfffff },
._kickstart = { "Kickstart ROM", 0x00f80000, 0x00ffffff }
};
static struct resource rtc_resource = {
NULL, 0x00dc0000, 0x00dcffff
};
static struct resource ram_resource[NUM_MEMINFO];
/*
* Parse an Amiga-specific record in the bootinfo
*/
int amiga_parse_bootinfo(const struct bi_record *record)
{
int unknown = 0;
const unsigned long *data = record->data;
switch (record->tag) {
case BI_AMIGA_MODEL:
{
unsigned long d = *data;
powerup_PCI_present = d & 0x100;
amiga_model = d & 0xff;
}
break;
case BI_AMIGA_ECLOCK:
amiga_eclock = *data;
break;
case BI_AMIGA_CHIPSET:
amiga_chipset = *data;
break;
case BI_AMIGA_CHIP_SIZE:
amiga_chip_size = *(const int *)data;
break;
case BI_AMIGA_VBLANK:
amiga_vblank = *(const unsigned char *)data;
break;
case BI_AMIGA_PSFREQ:
amiga_psfreq = *(const unsigned char *)data;
break;
case BI_AMIGA_AUTOCON:
#ifdef CONFIG_ZORRO
if (zorro_num_autocon < ZORRO_NUM_AUTO) {
const struct ConfigDev *cd = (struct ConfigDev *)data;
struct zorro_dev *dev = &zorro_autocon[zorro_num_autocon++];
dev->rom = cd->cd_Rom;
dev->slotaddr = cd->cd_SlotAddr;
dev->slotsize = cd->cd_SlotSize;
dev->resource.start = (unsigned long)cd->cd_BoardAddr;
dev->resource.end = dev->resource.start+cd->cd_BoardSize-1;
} else
printk("amiga_parse_bootinfo: too many AutoConfig devices\n");
#endif /* CONFIG_ZORRO */
break;
case BI_AMIGA_SERPER:
/* serial port period: ignored here */
break;
case BI_AMIGA_PUP_BRIDGE:
powerup_PCI_present = *(const unsigned short *)data;
break;
case BI_AMIGA_BPPC_SCSI:
powerup_BPPCPLUS_present = *(const unsigned short *)data;
break;
default:
unknown = 1;
}
return(unknown);
}
/*
* Identify builtin hardware
*/
static void __init amiga_identify(void)
{
/* Fill in some default values, if necessary */
if (amiga_eclock == 0)
amiga_eclock = 709379;
memset(&amiga_hw_present, 0, sizeof(amiga_hw_present));
printk("Amiga hardware found: ");
if (amiga_model >= AMI_500 && amiga_model <= AMI_DRACO) {
printk("[%s] ", amiga_models[amiga_model-AMI_500]);
strcat(amiga_model_name, amiga_models[amiga_model-AMI_500]);
}
switch(amiga_model) {
case AMI_UNKNOWN:
goto Generic;
case AMI_600:
case AMI_1200:
AMIGAHW_SET(A1200_IDE);
AMIGAHW_SET(PCMCIA);
case AMI_500:
case AMI_500PLUS:
case AMI_1000:
case AMI_2000:
case AMI_2500:
AMIGAHW_SET(A2000_CLK); /* Is this correct for all models? */
goto Generic;
case AMI_3000:
case AMI_3000T:
AMIGAHW_SET(AMBER_FF);
AMIGAHW_SET(MAGIC_REKICK);
/* fall through */
case AMI_3000PLUS:
AMIGAHW_SET(A3000_SCSI);
AMIGAHW_SET(A3000_CLK);
AMIGAHW_SET(ZORRO3);
goto Generic;
case AMI_4000T:
AMIGAHW_SET(A4000_SCSI);
/* fall through */
case AMI_4000:
AMIGAHW_SET(A4000_IDE);
AMIGAHW_SET(A3000_CLK);
AMIGAHW_SET(ZORRO3);
goto Generic;
case AMI_CDTV:
case AMI_CD32:
AMIGAHW_SET(CD_ROM);
AMIGAHW_SET(A2000_CLK); /* Is this correct? */
goto Generic;
Generic:
AMIGAHW_SET(AMI_VIDEO);
AMIGAHW_SET(AMI_BLITTER);
AMIGAHW_SET(AMI_AUDIO);
AMIGAHW_SET(AMI_FLOPPY);
AMIGAHW_SET(AMI_KEYBOARD);
AMIGAHW_SET(AMI_MOUSE);
AMIGAHW_SET(AMI_SERIAL);
AMIGAHW_SET(AMI_PARALLEL);
AMIGAHW_SET(CHIP_RAM);
AMIGAHW_SET(PAULA);
switch(amiga_chipset) {
case CS_OCS:
case CS_ECS:
case CS_AGA:
switch (amiga_custom.deniseid & 0xf) {
case 0x0c:
AMIGAHW_SET(DENISE_HR);
break;
case 0x08:
AMIGAHW_SET(LISA);
break;
}
break;
default:
AMIGAHW_SET(DENISE);
break;
}
switch ((amiga_custom.vposr>>8) & 0x7f) {
case 0x00:
AMIGAHW_SET(AGNUS_PAL);
break;
case 0x10:
AMIGAHW_SET(AGNUS_NTSC);
break;
case 0x20:
case 0x21:
AMIGAHW_SET(AGNUS_HR_PAL);
break;
case 0x30:
case 0x31:
AMIGAHW_SET(AGNUS_HR_NTSC);
break;
case 0x22:
case 0x23:
AMIGAHW_SET(ALICE_PAL);
break;
case 0x32:
case 0x33:
AMIGAHW_SET(ALICE_NTSC);
break;
}
AMIGAHW_SET(ZORRO);
break;
case AMI_DRACO:
panic("No support for Draco yet");
default:
panic("Unknown Amiga Model");
}
#define AMIGAHW_ANNOUNCE(name, str) \
if (AMIGAHW_PRESENT(name)) \
printk(str)
AMIGAHW_ANNOUNCE(AMI_VIDEO, "VIDEO ");
AMIGAHW_ANNOUNCE(AMI_BLITTER, "BLITTER ");
AMIGAHW_ANNOUNCE(AMBER_FF, "AMBER_FF ");
AMIGAHW_ANNOUNCE(AMI_AUDIO, "AUDIO ");
AMIGAHW_ANNOUNCE(AMI_FLOPPY, "FLOPPY ");
AMIGAHW_ANNOUNCE(A3000_SCSI, "A3000_SCSI ");
AMIGAHW_ANNOUNCE(A4000_SCSI, "A4000_SCSI ");
AMIGAHW_ANNOUNCE(A1200_IDE, "A1200_IDE ");
AMIGAHW_ANNOUNCE(A4000_IDE, "A4000_IDE ");
AMIGAHW_ANNOUNCE(CD_ROM, "CD_ROM ");
AMIGAHW_ANNOUNCE(AMI_KEYBOARD, "KEYBOARD ");
AMIGAHW_ANNOUNCE(AMI_MOUSE, "MOUSE ");
AMIGAHW_ANNOUNCE(AMI_SERIAL, "SERIAL ");
AMIGAHW_ANNOUNCE(AMI_PARALLEL, "PARALLEL ");
AMIGAHW_ANNOUNCE(A2000_CLK, "A2000_CLK ");
AMIGAHW_ANNOUNCE(A3000_CLK, "A3000_CLK ");
AMIGAHW_ANNOUNCE(CHIP_RAM, "CHIP_RAM ");
AMIGAHW_ANNOUNCE(PAULA, "PAULA ");
AMIGAHW_ANNOUNCE(DENISE, "DENISE ");
AMIGAHW_ANNOUNCE(DENISE_HR, "DENISE_HR ");
AMIGAHW_ANNOUNCE(LISA, "LISA ");
AMIGAHW_ANNOUNCE(AGNUS_PAL, "AGNUS_PAL ");
AMIGAHW_ANNOUNCE(AGNUS_NTSC, "AGNUS_NTSC ");
AMIGAHW_ANNOUNCE(AGNUS_HR_PAL, "AGNUS_HR_PAL ");
AMIGAHW_ANNOUNCE(AGNUS_HR_NTSC, "AGNUS_HR_NTSC ");
AMIGAHW_ANNOUNCE(ALICE_PAL, "ALICE_PAL ");
AMIGAHW_ANNOUNCE(ALICE_NTSC, "ALICE_NTSC ");
AMIGAHW_ANNOUNCE(MAGIC_REKICK, "MAGIC_REKICK ");
AMIGAHW_ANNOUNCE(PCMCIA, "PCMCIA ");
if (AMIGAHW_PRESENT(ZORRO))
printk("ZORRO%s ", AMIGAHW_PRESENT(ZORRO3) ? "3" : "");
printk("\n");
#undef AMIGAHW_ANNOUNCE
}
/*
* Setup the Amiga configuration info
*/
void __init config_amiga(void)
{
int i;
amiga_debug_init();
amiga_identify();
/* Some APUS boxes may have PCI memory, but ... */
iomem_resource.name = "Memory";
for (i = 0; i < 4; i++)
request_resource(&iomem_resource, &((struct resource *)&mb_resources)[i]);
mach_sched_init = amiga_sched_init;
mach_init_IRQ = amiga_init_IRQ;
#ifndef CONFIG_APUS
mach_default_handler = &amiga_default_handler;
mach_request_irq = amiga_request_irq;
mach_free_irq = amiga_free_irq;
enable_irq = amiga_enable_irq;
disable_irq = amiga_disable_irq;
#endif
mach_get_model = amiga_get_model;
mach_get_hardware_list = amiga_get_hardware_list;
mach_gettimeoffset = amiga_gettimeoffset;
if (AMIGAHW_PRESENT(A3000_CLK)){
mach_gettod = a3000_gettod;
rtc_resource.name = "A3000 RTC";
request_resource(&iomem_resource, &rtc_resource);
}
else{ /* if (AMIGAHW_PRESENT(A2000_CLK)) */
mach_gettod = a2000_gettod;
rtc_resource.name = "A2000 RTC";
request_resource(&iomem_resource, &rtc_resource);
}
mach_max_dma_address = 0xffffffff; /*
* default MAX_DMA=0xffffffff
* on all machines. If we don't
* do so, the SCSI code will not
* be able to allocate any mem
* for transfers, unless we are
* dealing with a Z2 mem only
* system. /Jes
*/
mach_hwclk = amiga_hwclk;
mach_set_clock_mmss = amiga_set_clock_mmss;
mach_reset = amiga_reset;
#ifdef CONFIG_HEARTBEAT
mach_heartbeat = amiga_heartbeat;
#endif
/* Fill in the clock values (based on the 700 kHz E-Clock) */
amiga_masterclock = 40*amiga_eclock; /* 28 MHz */
amiga_colorclock = 5*amiga_eclock; /* 3.5 MHz */
/* clear all DMA bits */
amiga_custom.dmacon = DMAF_ALL;
/* ensure that the DMA master bit is set */
amiga_custom.dmacon = DMAF_SETCLR | DMAF_MASTER;
/* request all RAM */
for (i = 0; i < m68k_num_memory; i++) {
ram_resource[i].name =
(m68k_memory[i].addr >= 0x01000000) ? "32-bit Fast RAM" :
(m68k_memory[i].addr < 0x00c00000) ? "16-bit Fast RAM" :
"16-bit Slow RAM";
ram_resource[i].start = m68k_memory[i].addr;
ram_resource[i].end = m68k_memory[i].addr+m68k_memory[i].size-1;
request_resource(&iomem_resource, &ram_resource[i]);
}
/* initialize chipram allocator */
amiga_chip_init ();
/* debugging using chipram */
if (!strcmp( m68k_debug_device, "mem" )){
if (!AMIGAHW_PRESENT(CHIP_RAM))
printk("Warning: no chipram present for debugging\n");
else {
amiga_savekmsg_init();
amiga_console_driver.write = amiga_mem_console_write;
register_console(&amiga_console_driver);
}
}
/* our beloved beeper */
if (AMIGAHW_PRESENT(AMI_AUDIO))
amiga_init_sound();
/*
* if it is an A3000, set the magic bit that forces
* a hard rekick
*/
if (AMIGAHW_PRESENT(MAGIC_REKICK))
*(unsigned char *)ZTWO_VADDR(0xde0002) |= 0x80;
}
static unsigned short jiffy_ticks;
static void __init amiga_sched_init(irqreturn_t (*timer_routine)(int, void *,
struct pt_regs *))
{
static struct resource sched_res = {
"timer", 0x00bfd400, 0x00bfd5ff,
};
jiffy_ticks = (amiga_eclock+HZ/2)/HZ;
if (request_resource(&mb_resources._ciab, &sched_res))
printk("Cannot allocate ciab.ta{lo,hi}\n");
ciab.cra &= 0xC0; /* turn off timer A, continuous mode, from Eclk */
ciab.talo = jiffy_ticks % 256;
ciab.tahi = jiffy_ticks / 256;
/* install interrupt service routine for CIAB Timer A
*
* Please don't change this to use ciaa, as it interferes with the
* SCSI code. We'll have to take a look at this later
*/
request_irq(IRQ_AMIGA_CIAB_TA, timer_routine, 0, "timer", NULL);
/* start timer */
ciab.cra |= 0x11;
}
#define TICK_SIZE 10000
extern unsigned char cia_get_irq_mask(unsigned int irq);
/* This is always executed with interrupts disabled. */
static unsigned long amiga_gettimeoffset (void)
{
unsigned short hi, lo, hi2;
unsigned long ticks, offset = 0;
/* read CIA B timer A current value */
hi = ciab.tahi;
lo = ciab.talo;
hi2 = ciab.tahi;
if (hi != hi2) {
lo = ciab.talo;
hi = hi2;
}
ticks = hi << 8 | lo;
if (ticks > jiffy_ticks / 2)
/* check for pending interrupt */
if (cia_get_irq_mask(IRQ_AMIGA_CIAB) & CIA_ICR_TA)
offset = 10000;
ticks = jiffy_ticks - ticks;
ticks = (10000 * ticks) / jiffy_ticks;
return ticks + offset;
}
static void a3000_gettod (int *yearp, int *monp, int *dayp,
int *hourp, int *minp, int *secp)
{
volatile struct tod3000 *tod = TOD_3000;
tod->cntrl1 = TOD3000_CNTRL1_HOLD;
*secp = tod->second1 * 10 + tod->second2;
*minp = tod->minute1 * 10 + tod->minute2;
*hourp = tod->hour1 * 10 + tod->hour2;
*dayp = tod->day1 * 10 + tod->day2;
*monp = tod->month1 * 10 + tod->month2;
*yearp = tod->year1 * 10 + tod->year2;
tod->cntrl1 = TOD3000_CNTRL1_FREE;
}
static void a2000_gettod (int *yearp, int *monp, int *dayp,
int *hourp, int *minp, int *secp)
{
volatile struct tod2000 *tod = TOD_2000;
tod->cntrl1 = TOD2000_CNTRL1_HOLD;
while (tod->cntrl1 & TOD2000_CNTRL1_BUSY)
;
*secp = tod->second1 * 10 + tod->second2;
*minp = tod->minute1 * 10 + tod->minute2;
*hourp = (tod->hour1 & 3) * 10 + tod->hour2;
*dayp = tod->day1 * 10 + tod->day2;
*monp = tod->month1 * 10 + tod->month2;
*yearp = tod->year1 * 10 + tod->year2;
if (!(tod->cntrl3 & TOD2000_CNTRL3_24HMODE)){
if (!(tod->hour1 & TOD2000_HOUR1_PM) && *hourp == 12)
*hourp = 0;
else if ((tod->hour1 & TOD2000_HOUR1_PM) && *hourp != 12)
*hourp += 12;
}
tod->cntrl1 &= ~TOD2000_CNTRL1_HOLD;
}
static int amiga_hwclk(int op, struct hwclk_time *t)
{
if (AMIGAHW_PRESENT(A3000_CLK)) {
volatile struct tod3000 *tod = TOD_3000;
tod->cntrl1 = TOD3000_CNTRL1_HOLD;
if (!op) { /* read */
t->sec = tod->second1 * 10 + tod->second2;
t->min = tod->minute1 * 10 + tod->minute2;
t->hour = tod->hour1 * 10 + tod->hour2;
t->day = tod->day1 * 10 + tod->day2;
t->wday = tod->weekday;
t->mon = tod->month1 * 10 + tod->month2 - 1;
t->year = tod->year1 * 10 + tod->year2;
if (t->year <= 69)
t->year += 100;
} else {
tod->second1 = t->sec / 10;
tod->second2 = t->sec % 10;
tod->minute1 = t->min / 10;
tod->minute2 = t->min % 10;
tod->hour1 = t->hour / 10;
tod->hour2 = t->hour % 10;
tod->day1 = t->day / 10;
tod->day2 = t->day % 10;
if (t->wday != -1)
tod->weekday = t->wday;
tod->month1 = (t->mon + 1) / 10;
tod->month2 = (t->mon + 1) % 10;
if (t->year >= 100)
t->year -= 100;
tod->year1 = t->year / 10;
tod->year2 = t->year % 10;
}
tod->cntrl1 = TOD3000_CNTRL1_FREE;
} else /* if (AMIGAHW_PRESENT(A2000_CLK)) */ {
volatile struct tod2000 *tod = TOD_2000;
tod->cntrl1 = TOD2000_CNTRL1_HOLD;
while (tod->cntrl1 & TOD2000_CNTRL1_BUSY)
;
if (!op) { /* read */
t->sec = tod->second1 * 10 + tod->second2;
t->min = tod->minute1 * 10 + tod->minute2;
t->hour = (tod->hour1 & 3) * 10 + tod->hour2;
t->day = tod->day1 * 10 + tod->day2;
t->wday = tod->weekday;
t->mon = tod->month1 * 10 + tod->month2 - 1;
t->year = tod->year1 * 10 + tod->year2;
if (t->year <= 69)
t->year += 100;
if (!(tod->cntrl3 & TOD2000_CNTRL3_24HMODE)){
if (!(tod->hour1 & TOD2000_HOUR1_PM) && t->hour == 12)
t->hour = 0;
else if ((tod->hour1 & TOD2000_HOUR1_PM) && t->hour != 12)
t->hour += 12;
}
} else {
tod->second1 = t->sec / 10;
tod->second2 = t->sec % 10;
tod->minute1 = t->min / 10;
tod->minute2 = t->min % 10;
if (tod->cntrl3 & TOD2000_CNTRL3_24HMODE)
tod->hour1 = t->hour / 10;
else if (t->hour >= 12)
tod->hour1 = TOD2000_HOUR1_PM +
(t->hour - 12) / 10;
else
tod->hour1 = t->hour / 10;
tod->hour2 = t->hour % 10;
tod->day1 = t->day / 10;
tod->day2 = t->day % 10;
if (t->wday != -1)
tod->weekday = t->wday;
tod->month1 = (t->mon + 1) / 10;
tod->month2 = (t->mon + 1) % 10;
if (t->year >= 100)
t->year -= 100;
tod->year1 = t->year / 10;
tod->year2 = t->year % 10;
}
tod->cntrl1 &= ~TOD2000_CNTRL1_HOLD;
}
return 0;
}
static int amiga_set_clock_mmss (unsigned long nowtime)
{
short real_seconds = nowtime % 60, real_minutes = (nowtime / 60) % 60;
if (AMIGAHW_PRESENT(A3000_CLK)) {
volatile struct tod3000 *tod = TOD_3000;
tod->cntrl1 = TOD3000_CNTRL1_HOLD;
tod->second1 = real_seconds / 10;
tod->second2 = real_seconds % 10;
tod->minute1 = real_minutes / 10;
tod->minute2 = real_minutes % 10;
tod->cntrl1 = TOD3000_CNTRL1_FREE;
} else /* if (AMIGAHW_PRESENT(A2000_CLK)) */ {
volatile struct tod2000 *tod = TOD_2000;
tod->cntrl1 = TOD2000_CNTRL1_HOLD;
while (tod->cntrl1 & TOD2000_CNTRL1_BUSY)
;
tod->second1 = real_seconds / 10;
tod->second2 = real_seconds % 10;
tod->minute1 = real_minutes / 10;
tod->minute2 = real_minutes % 10;
tod->cntrl1 &= ~TOD2000_CNTRL1_HOLD;
}
return 0;
}
static NORET_TYPE void amiga_reset( void )
ATTRIB_NORET;
static void amiga_reset (void)
{
for (;;);
}
/*
* Debugging
*/
#define SAVEKMSG_MAXMEM 128*1024
#define SAVEKMSG_MAGIC1 0x53415645 /* 'SAVE' */
#define SAVEKMSG_MAGIC2 0x4B4D5347 /* 'KMSG' */
struct savekmsg {
unsigned long magic1; /* SAVEKMSG_MAGIC1 */
unsigned long magic2; /* SAVEKMSG_MAGIC2 */
unsigned long magicptr; /* address of magic1 */
unsigned long size;
char data[0];
};
static struct savekmsg *savekmsg = NULL;
static void amiga_mem_console_write(struct console *co, const char *s,
unsigned int count)
{
if (savekmsg->size+count <= SAVEKMSG_MAXMEM-sizeof(struct savekmsg)) {
memcpy(savekmsg->data+savekmsg->size, s, count);
savekmsg->size += count;
}
}
static void amiga_savekmsg_init(void)
{
static struct resource debug_res = { "Debug" };
savekmsg = amiga_chip_alloc_res(SAVEKMSG_MAXMEM, &debug_res);
savekmsg->magic1 = SAVEKMSG_MAGIC1;
savekmsg->magic2 = SAVEKMSG_MAGIC2;
savekmsg->magicptr = virt_to_phys(savekmsg);
savekmsg->size = 0;
}
static void amiga_serial_putc(char c)
{
amiga_custom.serdat = (unsigned char)c | 0x100;
mb();
while (!(amiga_custom.serdatr & 0x2000))
;
}
void amiga_serial_console_write(struct console *co, const char *s,
unsigned int count)
{
#if 0 /* def CONFIG_KGDB */
/* FIXME:APUS GDB doesn't seem to like O-packages before it is
properly connected with the target. */
__gdb_output_string (s, count);
#else
while (count--) {
if (*s == '\n')
amiga_serial_putc('\r');
amiga_serial_putc(*s++);
}
#endif
}
#ifdef CONFIG_SERIAL_CONSOLE
void amiga_serial_puts(const char *s)
{
amiga_serial_console_write(NULL, s, strlen(s));
}
int amiga_serial_console_wait_key(struct console *co)
{
int ch;
while (!(amiga_custom.intreqr & IF_RBF))
barrier();
ch = amiga_custom.serdatr & 0xff;
/* clear the interrupt, so that another character can be read */
amiga_custom.intreq = IF_RBF;
return ch;
}
void amiga_serial_gets(struct console *co, char *s, int len)
{
int ch, cnt = 0;
while (1) {
ch = amiga_serial_console_wait_key(co);
/* Check for backspace. */
if (ch == 8 || ch == 127) {
if (cnt == 0) {
amiga_serial_putc('\007');
continue;
}
cnt--;
amiga_serial_puts("\010 \010");
continue;
}
/* Check for enter. */
if (ch == 10 || ch == 13)
break;
/* See if line is too long. */
if (cnt >= len + 1) {
amiga_serial_putc(7);
cnt--;
continue;
}
/* Store and echo character. */
s[cnt++] = ch;
amiga_serial_putc(ch);
}
/* Print enter. */
amiga_serial_puts("\r\n");
s[cnt] = 0;
}
#endif
static void __init amiga_debug_init(void)
{
if (!strcmp( m68k_debug_device, "ser" )) {
/* no initialization required (?) */
amiga_console_driver.write = amiga_serial_console_write;
register_console(&amiga_console_driver);
}
}
#ifdef CONFIG_HEARTBEAT
static void amiga_heartbeat(int on)
{
if (on)
ciaa.pra &= ~2;
else
ciaa.pra |= 2;
}
#endif
/*
* Amiga specific parts of /proc
*/
static void amiga_get_model(char *model)
{
strcpy(model, amiga_model_name);
}
static int amiga_get_hardware_list(char *buffer)
{
int len = 0;
if (AMIGAHW_PRESENT(CHIP_RAM))
len += sprintf(buffer+len, "Chip RAM:\t%ldK\n", amiga_chip_size>>10);
len += sprintf(buffer+len, "PS Freq:\t%dHz\nEClock Freq:\t%ldHz\n",
amiga_psfreq, amiga_eclock);
if (AMIGAHW_PRESENT(AMI_VIDEO)) {
char *type;
switch(amiga_chipset) {
case CS_OCS:
type = "OCS";
break;
case CS_ECS:
type = "ECS";
break;
case CS_AGA:
type = "AGA";
break;
default:
type = "Old or Unknown";
break;
}
len += sprintf(buffer+len, "Graphics:\t%s\n", type);
}
#define AMIGAHW_ANNOUNCE(name, str) \
if (AMIGAHW_PRESENT(name)) \
len += sprintf (buffer+len, "\t%s\n", str)
len += sprintf (buffer + len, "Detected hardware:\n");
AMIGAHW_ANNOUNCE(AMI_VIDEO, "Amiga Video");
AMIGAHW_ANNOUNCE(AMI_BLITTER, "Blitter");
AMIGAHW_ANNOUNCE(AMBER_FF, "Amber Flicker Fixer");
AMIGAHW_ANNOUNCE(AMI_AUDIO, "Amiga Audio");
AMIGAHW_ANNOUNCE(AMI_FLOPPY, "Floppy Controller");
AMIGAHW_ANNOUNCE(A3000_SCSI, "SCSI Controller WD33C93 (A3000 style)");
AMIGAHW_ANNOUNCE(A4000_SCSI, "SCSI Controller NCR53C710 (A4000T style)");
AMIGAHW_ANNOUNCE(A1200_IDE, "IDE Interface (A1200 style)");
AMIGAHW_ANNOUNCE(A4000_IDE, "IDE Interface (A4000 style)");
AMIGAHW_ANNOUNCE(CD_ROM, "Internal CD ROM drive");
AMIGAHW_ANNOUNCE(AMI_KEYBOARD, "Keyboard");
AMIGAHW_ANNOUNCE(AMI_MOUSE, "Mouse Port");
AMIGAHW_ANNOUNCE(AMI_SERIAL, "Serial Port");
AMIGAHW_ANNOUNCE(AMI_PARALLEL, "Parallel Port");
AMIGAHW_ANNOUNCE(A2000_CLK, "Hardware Clock (A2000 style)");
AMIGAHW_ANNOUNCE(A3000_CLK, "Hardware Clock (A3000 style)");
AMIGAHW_ANNOUNCE(CHIP_RAM, "Chip RAM");
AMIGAHW_ANNOUNCE(PAULA, "Paula 8364");
AMIGAHW_ANNOUNCE(DENISE, "Denise 8362");
AMIGAHW_ANNOUNCE(DENISE_HR, "Denise 8373");
AMIGAHW_ANNOUNCE(LISA, "Lisa 8375");
AMIGAHW_ANNOUNCE(AGNUS_PAL, "Normal/Fat PAL Agnus 8367/8371");
AMIGAHW_ANNOUNCE(AGNUS_NTSC, "Normal/Fat NTSC Agnus 8361/8370");
AMIGAHW_ANNOUNCE(AGNUS_HR_PAL, "Fat Hires PAL Agnus 8372");
AMIGAHW_ANNOUNCE(AGNUS_HR_NTSC, "Fat Hires NTSC Agnus 8372");
AMIGAHW_ANNOUNCE(ALICE_PAL, "PAL Alice 8374");
AMIGAHW_ANNOUNCE(ALICE_NTSC, "NTSC Alice 8374");
AMIGAHW_ANNOUNCE(MAGIC_REKICK, "Magic Hard Rekick");
AMIGAHW_ANNOUNCE(PCMCIA, "PCMCIA Slot");
if (AMIGAHW_PRESENT(ZORRO))
len += sprintf(buffer+len, "\tZorro II%s AutoConfig: %d Expansion "
"Device%s\n",
AMIGAHW_PRESENT(ZORRO3) ? "I" : "",
zorro_num_autocon, zorro_num_autocon == 1 ? "" : "s");
#undef AMIGAHW_ANNOUNCE
return(len);
}
#ifdef CONFIG_APUS
int get_hardware_list(char *buffer)
{
extern int get_cpuinfo(char *buffer);
int len = 0;
char model[80];
u_long mem;
int i;
if (mach_get_model)
mach_get_model(model);
else
strcpy(model, "Unknown PowerPC");
len += sprintf(buffer+len, "Model:\t\t%s\n", model);
len += get_cpuinfo(buffer+len);
for (mem = 0, i = 0; i < m68k_realnum_memory; i++)
mem += m68k_memory[i].size;
len += sprintf(buffer+len, "System Memory:\t%ldK\n", mem>>10);
if (mach_get_hardware_list)
len += mach_get_hardware_list(buffer+len);
return(len);
}
#endif

158
arch/ppc/amiga/ints.c
View File

@ -1,158 +0,0 @@
/*
* Linux/m68k general interrupt handling code from arch/m68k/kernel/ints.c
* Needed to drive the m68k emulating IRQ hardware on the PowerUp boards.
*/
#include <linux/types.h>
#include <linux/sched.h>
#include <linux/kernel_stat.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/seq_file.h>
#include <asm/setup.h>
#include <asm/system.h>
#include <asm/irq.h>
#include <asm/traps.h>
#include <asm/page.h>
#include <asm/machdep.h>
/* table for system interrupt handlers */
static irq_handler_t irq_list[SYS_IRQS];
static const char *default_names[SYS_IRQS] = {
"spurious int", "int1 handler", "int2 handler", "int3 handler",
"int4 handler", "int5 handler", "int6 handler", "int7 handler"
};
/* The number of spurious interrupts */
volatile unsigned int num_spurious;
#define NUM_IRQ_NODES 100
static irq_node_t nodes[NUM_IRQ_NODES];
/*
* void init_IRQ(void)
*
* Parameters: None
*
* Returns: Nothing
*
* This function should be called during kernel startup to initialize
* the IRQ handling routines.
*/
__init
void m68k_init_IRQ(void)
{
int i;
for (i = 0; i < SYS_IRQS; i++) {
if (mach_default_handler)
irq_list[i].handler = (*mach_default_handler)[i];
irq_list[i].flags = 0;
irq_list[i].dev_id = NULL;
irq_list[i].devname = default_names[i];
}
for (i = 0; i < NUM_IRQ_NODES; i++)
nodes[i].handler = NULL;
mach_init_IRQ ();
}
irq_node_t *new_irq_node(void)
{
irq_node_t *node;
short i;
for (node = nodes, i = NUM_IRQ_NODES-1; i >= 0; node++, i--)
if (!node->handler)
return node;
printk ("new_irq_node: out of nodes\n");
return NULL;
}
int sys_request_irq(unsigned int irq,
void (*handler)(int, void *, struct pt_regs *),
unsigned long flags, const char *devname, void *dev_id)
{
if (irq < IRQ1 || irq > IRQ7) {
printk("%s: Incorrect IRQ %d from %s\n",
__FUNCTION__, irq, devname);
return -ENXIO;
}
#if 0
if (!(irq_list[irq].flags & IRQ_FLG_STD)) {
if (irq_list[irq].flags & IRQ_FLG_LOCK) {
printk("%s: IRQ %d from %s is not replaceable\n",
__FUNCTION__, irq, irq_list[irq].devname);
return -EBUSY;
}
if (!(flags & IRQ_FLG_REPLACE)) {
printk("%s: %s can't replace IRQ %d from %s\n",
__FUNCTION__, devname, irq, irq_list[irq].devname);
return -EBUSY;
}
}
#endif
irq_list[irq].handler = handler;
irq_list[irq].flags = flags;
irq_list[irq].dev_id = dev_id;
irq_list[irq].devname = devname;
return 0;
}
void sys_free_irq(unsigned int irq, void *dev_id)
{
if (irq < IRQ1 || irq > IRQ7) {
printk("%s: Incorrect IRQ %d\n", __FUNCTION__, irq);
return;
}
if (irq_list[irq].dev_id != dev_id)
printk("%s: Removing probably wrong IRQ %d from %s\n",
__FUNCTION__, irq, irq_list[irq].devname);
irq_list[irq].handler = (*mach_default_handler)[irq];
irq_list[irq].flags = 0;
irq_list[irq].dev_id = NULL;
irq_list[irq].devname = default_names[irq];
}
asmlinkage void process_int(unsigned long vec, struct pt_regs *fp)
{
if (vec >= VEC_INT1 && vec <= VEC_INT7 && !MACH_IS_BVME6000) {
vec -= VEC_SPUR;
kstat_cpu(0).irqs[vec]++;
irq_list[vec].handler(vec, irq_list[vec].dev_id, fp);
} else {
if (mach_process_int)
mach_process_int(vec, fp);
else
panic("Can't process interrupt vector %ld\n", vec);
return;
}
}
int m68k_get_irq_list(struct seq_file *p, void *v)
{
int i;
/* autovector interrupts */
if (mach_default_handler) {
for (i = 0; i < SYS_IRQS; i++) {
seq_printf(p, "auto %2d: %10u ", i,
i ? kstat_cpu(0).irqs[i] : num_spurious);
seq_puts(p, " ");
seq_printf(p, "%s\n", irq_list[i].devname);
}
}
mach_get_irq_list(p, v);
return 0;
}

1
arch/ppc/amiga/pcmcia.c
View File

@ -1 +0,0 @@
#include "../../m68k/amiga/pcmcia.c"

57
arch/ppc/amiga/time.c
View File

@ -1,57 +0,0 @@
#include <linux/errno.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/param.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <asm/machdep.h>
#include <asm/io.h>
#include <linux/timex.h>
unsigned long m68k_get_rtc_time(void)
{
unsigned int year, mon, day, hour, min, sec;
extern void arch_gettod(int *year, int *mon, int *day, int *hour,
int *min, int *sec);
arch_gettod (&year, &mon, &day, &hour, &min, &sec);
if ((year += 1900) < 1970)
year += 100;
return mktime(year, mon, day, hour, min, sec);
}
int m68k_set_rtc_time(unsigned long nowtime)
{
if (mach_set_clock_mmss)
return mach_set_clock_mmss (nowtime);
return -1;
}
void apus_heartbeat (void)
{
#ifdef CONFIG_HEARTBEAT
static unsigned cnt = 0, period = 0, dist = 0;
if (cnt == 0 || cnt == dist)
mach_heartbeat( 1 );
else if (cnt == 7 || cnt == dist+7)
mach_heartbeat( 0 );
if (++cnt > period) {
cnt = 0;
/* The hyperbolic function below modifies the heartbeat period
* length in dependency of the current (5min) load. It goes
* through the points f(0)=126, f(1)=86, f(5)=51,
* f(inf)->30. */
period = ((672<<FSHIFT)/(5*avenrun[0]+(7<<FSHIFT))) + 30;
dist = period / 4;
}
#endif
/* should be made smarter */
ppc_md.heartbeat_count = 1;
}

920
arch/ppc/configs/apus_defconfig
View File

@ -1,920 +0,0 @@
#
# Automatically generated make config: don't edit
#
CONFIG_MMU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_HAVE_DEC_LOCK=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_EMBEDDED is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
CONFIG_KMOD=y
#
# Platform support
#
CONFIG_PPC=y
CONFIG_PPC32=y
CONFIG_6xx=y
# CONFIG_40x is not set
# CONFIG_POWER3 is not set
# CONFIG_8xx is not set
#
# IBM 4xx options
#
# CONFIG_8260 is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_STD_MMU=y
CONFIG_SERIAL_CONSOLE=y
# CONFIG_PPC_MULTIPLATFORM is not set
CONFIG_APUS=y
# CONFIG_WILLOW_2 is not set
# CONFIG_PCORE is not set
# CONFIG_POWERPMC250 is not set
# CONFIG_EV64260 is not set
# CONFIG_SPRUCE is not set
# CONFIG_LOPEC is not set
# CONFIG_MCPN765 is not set
# CONFIG_MVME5100 is not set
# CONFIG_PPLUS is not set
# CONFIG_PRPMC750 is not set
# CONFIG_PRPMC800 is not set
# CONFIG_SANDPOINT is not set
# CONFIG_ADIR is not set
# CONFIG_K2 is not set
# CONFIG_PAL4 is not set
# CONFIG_GEMINI is not set
# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
# CONFIG_ALTIVEC is not set
# CONFIG_TAU is not set
# CONFIG_CPU_FREQ is not set
#
# General setup
#
# CONFIG_HIGHMEM is not set
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_PERMEDIA=y
CONFIG_KCORE_ELF=y
CONFIG_BINFMT_ELF=y
CONFIG_KERNEL_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
# CONFIG_HOTPLUG is not set
#
# Parallel port support
#
CONFIG_PARPORT=m
# CONFIG_PARPORT_PC is not set
CONFIG_PARPORT_AMIGA=m
# CONFIG_PARPORT_MFC3 is not set
# CONFIG_PARPORT_OTHER is not set
# CONFIG_PARPORT_1284 is not set
CONFIG_PPC601_SYNC_FIX=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_AMIGA=y
CONFIG_ZORRO=y
CONFIG_ABSTRACT_CONSOLE=y
CONFIG_APUS_FAST_EXCEPT=y
CONFIG_AMIGA_PCMCIA=y
CONFIG_AMIGA_BUILTIN_SERIAL=y
CONFIG_GVPIOEXT=y
CONFIG_GVPIOEXT_LP=m
CONFIG_GVPIOEXT_PLIP=m
CONFIG_MULTIFACE_III_TTY=y
CONFIG_A2232=y
CONFIG_WHIPPET_SERIAL=y
CONFIG_APNE=y
CONFIG_HEARTBEAT=y
CONFIG_PROC_HARDWARE=y
CONFIG_ZORRO_NAMES=y
#
# Advanced setup
#
# CONFIG_ADVANCED_OPTIONS is not set
#
# Default settings for advanced configuration options are used
#
CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_TASK_SIZE=0x80000000
CONFIG_BOOT_LOAD=0x00800000
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Plug and Play support
#
# CONFIG_PNP is not set
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
CONFIG_AMIGA_FLOPPY=y
CONFIG_AMIGA_Z2RAM=m
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID5=m
# CONFIG_MD_MULTIPATH is not set
CONFIG_BLK_DEV_DM=m
#
# ATA/IDE/MFM/RLL support
#
CONFIG_IDE=y
#
# IDE, ATA and ATAPI Block devices
#
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_IDEDISK_STROKE is not set
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDEFLOPPY=y
CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
# CONFIG_BLK_DEV_IDEPCI is not set
CONFIG_BLK_DEV_GAYLE=y
CONFIG_BLK_DEV_IDEDOUBLER=y
CONFIG_BLK_DEV_BUDDHA=y
#
# SCSI support
#
CONFIG_SCSI=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_REPORT_LUNS is not set
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C7xx is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_NCR53C8XX is not set
# CONFIG_SCSI_SYM53C8XX is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
CONFIG_A3000_SCSI=y
CONFIG_A4000T_SCSI=y
CONFIG_A2091_SCSI=y
CONFIG_GVP11_SCSI=y
CONFIG_CYBERSTORM_SCSI=y
CONFIG_CYBERSTORMII_SCSI=y
CONFIG_BLZ2060_SCSI=y
CONFIG_BLZ1230_SCSI=y
CONFIG_FASTLANE_SCSI=y
CONFIG_A4091_SCSI=y
CONFIG_WARPENGINE_SCSI=y
CONFIG_BLZ603EPLUS_SCSI=y
CONFIG_OKTAGON_SCSI=y
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
CONFIG_NETLINK_DEV=m
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_MAC=m
# CONFIG_IP_NF_MATCH_PKTTYPE is not set
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_DSCP is not set
# CONFIG_IP_NF_MATCH_AH_ESP is not set
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_UNCLEAN=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_MIRROR=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_COMPAT_IPCHAINS=m
# CONFIG_IP_NF_COMPAT_IPFWADM is not set
# CONFIG_IPV6 is not set
# CONFIG_XFRM_USER is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_LLC is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_ETHERTAP is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
# CONFIG_OAKNET is not set
CONFIG_ARIADNE=y
# CONFIG_ZORRO8390 is not set
CONFIG_A2065=y
CONFIG_HYDRA=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_NET_PCI is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PLIP=m
CONFIG_PPP=y
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=y
CONFIG_PPP_SYNC_TTY=y
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_BSDCOMP=y
CONFIG_PPPOE=y
CONFIG_SLIP=y
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Token Ring devices (depends on LLC=y)
#
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set
#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set
#
# Graphics support
#
CONFIG_FB=y
# CONFIG_FB_CIRRUS is not set
CONFIG_FB_PM2=y
# CONFIG_FB_PM2_FIFO_DISCONNECT is not set
# CONFIG_FB_PM2_PCI is not set
CONFIG_FB_PM2_CVPPC=y
CONFIG_FB_CYBER2000=y
CONFIG_FB_AMIGA=y
CONFIG_FB_AMIGA_OCS=y
CONFIG_FB_AMIGA_ECS=y
CONFIG_FB_AMIGA_AGA=y
CONFIG_FB_CYBER=y
CONFIG_FB_VIRGE=y
CONFIG_FB_RETINAZ3=y
CONFIG_FB_FM2=y
# CONFIG_FB_CT65550 is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_S3TRIO is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_VIRTUAL is not set
#
# Logo configuration
#
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Input device support
#
CONFIG_INPUT=m
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=m
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_EVBUG=m
#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=m
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_KEYBOARD_AMIGA=m
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_AMIGA=m
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_PCSPKR is not set
CONFIG_INPUT_UINPUT=m
#
# Macintosh device drivers
#
#
# Character devices
#
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# I2C Hardware Sensors Mainboard support
#
#
# I2C Hardware Sensors Chip support
#
# CONFIG_I2C_SENSOR is not set
#
# Mice
#
CONFIG_BUSMOUSE=y
# CONFIG_QIC02_TAPE is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
CONFIG_MINIX_FS=y
CONFIG_ROMFS_FS=y
# CONFIG_QUOTA is not set
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS=y
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=y
CONFIG_HFS_FS=y
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V4 is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V4 is not set
# CONFIG_NFSD_TCP is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_GSS is not set
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
# CONFIG_NEC98_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
CONFIG_SMB_NLS=y
CONFIG_NLS=y
#
# Native Language Support
#
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
# CONFIG_NLS_CODEPAGE_1250 is not set
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
#
# Sound
#
CONFIG_SOUND=y
CONFIG_DMASOUND_PAULA=m
CONFIG_DMASOUND=m
#
# Advanced Linux Sound Architecture
#
# CONFIG_SND is not set
#
# Open Sound System
#
CONFIG_SOUND_PRIME=m
# CONFIG_SOUND_BT878 is not set
# CONFIG_SOUND_CMPCI is not set
# CONFIG_SOUND_EMU10K1 is not set
# CONFIG_SOUND_FUSION is not set
# CONFIG_SOUND_CS4281 is not set
# CONFIG_SOUND_ES1370 is not set
# CONFIG_SOUND_ES1371 is not set
# CONFIG_SOUND_ESSSOLO1 is not set
# CONFIG_SOUND_MAESTRO is not set
# CONFIG_SOUND_MAESTRO3 is not set
# CONFIG_SOUND_ICH is not set
# CONFIG_SOUND_RME96XX is not set
# CONFIG_SOUND_SONICVIBES is not set
# CONFIG_SOUND_TRIDENT is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
# CONFIG_SOUND_VIA82CXXX is not set
CONFIG_SOUND_OSS=m
CONFIG_SOUND_TRACEINIT=y
CONFIG_SOUND_DMAP=y
# CONFIG_SOUND_AD1816 is not set
# CONFIG_SOUND_SGALAXY is not set
# CONFIG_SOUND_ADLIB is not set
# CONFIG_SOUND_ACI_MIXER is not set
# CONFIG_SOUND_CS4232 is not set
# CONFIG_SOUND_SSCAPE is not set
# CONFIG_SOUND_GUS is not set
CONFIG_SOUND_VMIDI=m
# CONFIG_SOUND_TRIX is not set
# CONFIG_SOUND_MSS is not set
# CONFIG_SOUND_MPU401 is not set
# CONFIG_SOUND_NM256 is not set
# CONFIG_SOUND_MAD16 is not set
# CONFIG_SOUND_PAS is not set
# CONFIG_SOUND_PSS is not set
# CONFIG_SOUND_SB is not set
# CONFIG_SOUND_AWE32_SYNTH is not set
# CONFIG_SOUND_WAVEFRONT is not set
# CONFIG_SOUND_MAUI is not set
# CONFIG_SOUND_YM3812 is not set
# CONFIG_SOUND_OPL3SA1 is not set
# CONFIG_SOUND_OPL3SA2 is not set
# CONFIG_SOUND_YMFPCI is not set
# CONFIG_SOUND_UART6850 is not set
# CONFIG_SOUND_AEDSP16 is not set
#
# USB support
#
# CONFIG_USB is not set
# CONFIG_USB_GADGET is not set
#
# Bluetooth support
#
# CONFIG_BT is not set
#
# Library routines
#
# CONFIG_CRC32 is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
#
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_KALLSYMS is not set
#
# Security options
#
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set

117
arch/ppc/kernel/head.S
View File

@ -32,10 +32,6 @@
#include <asm/ppc_asm.h>
#include <asm/asm-offsets.h>
#ifdef CONFIG_APUS
#include <asm/amigappc.h>
#endif
/* 601 only have IBAT; cr0.eq is set on 601 when using this macro */
#define LOAD_BAT(n, reg, RA, RB) \
/* see the comment for clear_bats() -- Cort */ \
@ -128,14 +124,6 @@ __start:
*/
bl early_init
#ifdef CONFIG_APUS
/* On APUS the __va/__pa constants need to be set to the correct
* values before continuing.
*/
mr r4,r30
bl fix_mem_constants
#endif /* CONFIG_APUS */
/* Switch MMU off, clear BATs and flush TLB. At this point, r3 contains
* the physical address we are running at, returned by early_init()
*/
@ -145,7 +133,7 @@ __after_mmu_off:
bl flush_tlbs
bl initial_bats
#if !defined(CONFIG_APUS) && defined(CONFIG_BOOTX_TEXT)
#ifdef CONFIG_BOOTX_TEXT
bl setup_disp_bat
#endif
@ -161,7 +149,6 @@ __after_mmu_off:
#endif /* CONFIG_6xx */
#ifndef CONFIG_APUS
/*
* We need to run with _start at physical address 0.
* If the MMU is already turned on, we copy stuff to KERNELBASE,
@ -172,7 +159,7 @@ __after_mmu_off:
addis r4,r3,KERNELBASE@h /* current address of _start */
cmpwi 0,r4,0 /* are we already running at 0? */
bne relocate_kernel
#endif /* CONFIG_APUS */
/*
* we now have the 1st 16M of ram mapped with the bats.
* prep needs the mmu to be turned on here, but pmac already has it on.
@ -812,85 +799,6 @@ copy_and_flush:
addi r6,r6,4
blr
#ifdef CONFIG_APUS
/*
* On APUS the physical base address of the kernel is not known at compile
* time, which means the __pa/__va constants used are incorrect. In the
* __init section is recorded the virtual addresses of instructions using
* these constants, so all that has to be done is fix these before
* continuing the kernel boot.
*
* r4 = The physical address of the kernel base.
*/
fix_mem_constants:
mr r10,r4
addis r10,r10,-KERNELBASE@h /* virt_to_phys constant */
neg r11,r10 /* phys_to_virt constant */
lis r12,__vtop_table_begin@h
ori r12,r12,__vtop_table_begin@l
add r12,r12,r10 /* table begin phys address */
lis r13,__vtop_table_end@h
ori r13,r13,__vtop_table_end@l
add r13,r13,r10 /* table end phys address */
subi r12,r12,4
subi r13,r13,4
1: lwzu r14,4(r12) /* virt address of instruction */
add r14,r14,r10 /* phys address of instruction */
lwz r15,0(r14) /* instruction, now insert top */
rlwimi r15,r10,16,16,31 /* half of vp const in low half */
stw r15,0(r14) /* of instruction and restore. */
dcbst r0,r14 /* write it to memory */
sync
icbi r0,r14 /* flush the icache line */
cmpw r12,r13
bne 1b
sync /* additional sync needed on g4 */
isync
/*
* Map the memory where the exception handlers will
* be copied to when hash constants have been patched.
*/
#ifdef CONFIG_APUS_FAST_EXCEPT
lis r8,0xfff0
#else
lis r8,0
#endif
ori r8,r8,0x2 /* 128KB, supervisor */
mtspr SPRN_DBAT3U,r8
mtspr SPRN_DBAT3L,r8
lis r12,__ptov_table_begin@h
ori r12,r12,__ptov_table_begin@l
add r12,r12,r10 /* table begin phys address */
lis r13,__ptov_table_end@h
ori r13,r13,__ptov_table_end@l
add r13,r13,r10 /* table end phys address */
subi r12,r12,4
subi r13,r13,4
1: lwzu r14,4(r12) /* virt address of instruction */
add r14,r14,r10 /* phys address of instruction */
lwz r15,0(r14) /* instruction, now insert top */
rlwimi r15,r11,16,16,31 /* half of pv const in low half*/
stw r15,0(r14) /* of instruction and restore. */
dcbst r0,r14 /* write it to memory */
sync
icbi r0,r14 /* flush the icache line */
cmpw r12,r13
bne 1b
sync /* additional sync needed on g4 */
isync /* No speculative loading until now */
blr
/***********************************************************************
* Please note that on APUS the exception handlers are located at the
* physical address 0xfff0000. For this reason, the exception handlers
* cannot use relative branches to access the code below.
***********************************************************************/
#endif /* CONFIG_APUS */
#ifdef CONFIG_SMP
.globl __secondary_start_pmac_0
__secondary_start_pmac_0:
@ -1043,19 +951,6 @@ start_here:
bl machine_init
bl MMU_init
#ifdef CONFIG_APUS
/* Copy exception code to exception vector base on APUS. */
lis r4,KERNELBASE@h
#ifdef CONFIG_APUS_FAST_EXCEPT
lis r3,0xfff0 /* Copy to 0xfff00000 */
#else
lis r3,0 /* Copy to 0x00000000 */
#endif
li r5,0x4000 /* # bytes of memory to copy */
li r6,0
bl copy_and_flush /* copy the first 0x4000 bytes */
#endif /* CONFIG_APUS */
/*
* Go back to running unmapped so we can load up new values
* for SDR1 (hash table pointer) and the segment registers
@ -1232,11 +1127,7 @@ initial_bats:
#else
ori r8,r8,2 /* R/W access */
#endif /* CONFIG_SMP */
#ifdef CONFIG_APUS
ori r11,r11,BL_8M<<2|0x2 /* set up 8MB BAT registers for 604 */
#else
ori r11,r11,BL_256M<<2|0x2 /* set up BAT registers for 604 */
#endif /* CONFIG_APUS */
mtspr SPRN_DBAT0L,r8 /* N.B. 6xx (not 601) have valid */
mtspr SPRN_DBAT0U,r11 /* bit in upper BAT register */
@ -1245,7 +1136,7 @@ initial_bats:
isync
blr
#if !defined(CONFIG_APUS) && defined(CONFIG_BOOTX_TEXT)
#ifdef CONFIG_BOOTX_TEXT
setup_disp_bat:
/*
* setup the display bat prepared for us in prom.c
@ -1268,7 +1159,7 @@ setup_disp_bat:
mtspr SPRN_IBAT3U,r11
blr
#endif /* !defined(CONFIG_APUS) && defined(CONFIG_BOOTX_TEXT) */
#endif /* defined(CONFIG_BOOTX_TEXT) */
#ifdef CONFIG_8260
/* Jump into the system reset for the rom.

3
arch/ppc/kernel/ppc_ksyms.c
View File

@ -60,8 +60,6 @@ long long __ashrdi3(long long, int);
long long __ashldi3(long long, int);
long long __lshrdi3(long long, int);
extern unsigned long mm_ptov (unsigned long paddr);
EXPORT_SYMBOL(clear_pages);
EXPORT_SYMBOL(clear_user_page);
EXPORT_SYMBOL(transfer_to_handler);
@ -118,7 +116,6 @@ EXPORT_SYMBOL(_outsw_ns);
EXPORT_SYMBOL(_insl_ns);
EXPORT_SYMBOL(_outsl_ns);
EXPORT_SYMBOL(iopa);
EXPORT_SYMBOL(mm_ptov);
EXPORT_SYMBOL(ioremap);
#ifdef CONFIG_44x
EXPORT_SYMBOL(ioremap64);

1
arch/ppc/kernel/setup.c
View File

@ -25,7 +25,6 @@
#include <asm/pgtable.h>
#include <asm/bootinfo.h>
#include <asm/setup.h>
#include <asm/amigappc.h>
#include <asm/smp.h>
#include <asm/elf.h>
#include <asm/cputable.h>

38
arch/ppc/mm/pgtable.c
View File

@ -426,41 +426,3 @@ unsigned long iopa(unsigned long addr)
return(pa);
}
/* This is will find the virtual address for a physical one....
* Swiped from APUS, could be dangerous :-).
* This is only a placeholder until I really find a way to make this
* work. -- Dan
*/
unsigned long
mm_ptov (unsigned long paddr)
{
unsigned long ret;
#if 0
if (paddr < 16*1024*1024)
ret = ZTWO_VADDR(paddr);
else {
int i;
for (i = 0; i < kmap_chunk_count;){
unsigned long phys = kmap_chunks[i++];
unsigned long size = kmap_chunks[i++];
unsigned long virt = kmap_chunks[i++];
if (paddr >= phys
&& paddr < (phys + size)){
ret = virt + paddr - phys;
goto exit;
}
}
ret = (unsigned long) __va(paddr);
}
exit:
#ifdef DEBUGPV
printk ("PTOV(%lx)=%lx\n", paddr, ret);
#endif
#else
ret = (unsigned long)paddr + KERNELBASE;
#endif
return ret;
}

4
arch/ppc/platforms/Makefile
View File

@ -2,10 +2,6 @@
# Makefile for the linux kernel.
#
obj-$(CONFIG_APUS) += apus_setup.o
ifeq ($(CONFIG_APUS),y)
obj-$(CONFIG_PCI) += apus_pci.o
endif
obj-$(CONFIG_PPC_PREP) += prep_pci.o prep_setup.o
obj-$(CONFIG_PREP_RESIDUAL) += residual.o
obj-$(CONFIG_PQ2ADS) += pq2ads.o

207
arch/ppc/platforms/apus_pci.c
View File

@ -1,207 +0,0 @@
/*
* Copyright (C) Michel Dänzer <michdaen@iiic.ethz.ch>
*
* APUS PCI routines.
*
* Currently, only B/CVisionPPC cards (Permedia2) are supported.
*
* Thanks to Geert Uytterhoeven for the idea:
* Read values from given config space(s) for the first devices, -1 otherwise
*
*/
#ifdef CONFIG_AMIGA
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/string.h>
#include <linux/init.h>
#include <asm/io.h>
#include <asm/pci-bridge.h>
#include <asm/machdep.h>
#include "apus_pci.h"
/* These definitions are mostly adapted from pm2fb.c */
#undef APUS_PCI_MASTER_DEBUG
#ifdef APUS_PCI_MASTER_DEBUG
#define DPRINTK(a,b...) printk(KERN_DEBUG "apus_pci: %s: " a, __FUNCTION__ , ## b)
#else
#define DPRINTK(a,b...)
#endif
/*
* The _DEFINITIVE_ memory mapping/unmapping functions.
* This is due to the fact that they're changing soooo often...
*/
#define DEFW() wmb()
#define DEFR() rmb()
#define DEFRW() mb()
#define DEVNO(d) ((d)>>3)
#define FNNO(d) ((d)&7)
extern unsigned long powerup_PCI_present;
static struct pci_controller *apus_hose;
void *pci_io_base(unsigned int bus)
{
return 0;
}
int
apus_pcibios_read_config(struct pci_bus *bus, int devfn, int offset,
int len, u32 *val)
{
int fnno = FNNO(devfn);
int devno = DEVNO(devfn);
volatile unsigned char *cfg_data;
if (bus->number > 0 || devno != 1) {
*val = ~0;
return PCIBIOS_DEVICE_NOT_FOUND;
}
/* base address + function offset + offset ^ endianness conversion */
/* XXX the fnno<<5 bit seems wacky -- paulus */
cfg_data = apus_hose->cfg_data + (fnno<<5) + (offset ^ (len - 1));
switch (len) {
case 1:
*val = readb(cfg_data);
break;
case 2:
*val = readw(cfg_data);
break;
default:
*val = readl(cfg_data);
break;
}
DPRINTK("read b: 0x%x, d: 0x%x, f: 0x%x, o: 0x%x, l: %d, v: 0x%x\n",
bus->number, devfn>>3, devfn&7, offset, len, *val);
return PCIBIOS_SUCCESSFUL;
}
int
apus_pcibios_write_config(struct pci_bus *bus, int devfn, int offset,
int len, u32 *val)
{
int fnno = FNNO(devfn);
int devno = DEVNO(devfn);
volatile unsigned char *cfg_data;
if (bus->number > 0 || devno != 1) {
return PCIBIOS_DEVICE_NOT_FOUND;
}
/* base address + function offset + offset ^ endianness conversion */
/* XXX the fnno<<5 bit seems wacky -- paulus */
cfg_data = apus_hose->cfg_data + (fnno<<5) + (offset ^ (len - 1));
switch (len) {
case 1:
writeb(val, cfg_data); DEFW();
break;
case 2:
writew(val, cfg_data); DEFW();
break;
default:
writel(val, cfg_data); DEFW();
break;
}
DPRINTK("write b: 0x%x, d: 0x%x, f: 0x%x, o: 0x%x, l: %d, v: 0x%x\n",
bus->number, devfn>>3, devfn&7, offset, len, val);
return PCIBIOS_SUCCESSFUL;
}
static struct pci_ops apus_pci_ops = {
apus_pcibios_read_config,
apus_pcibios_write_config
};
static struct resource pci_mem = { "B/CVisionPPC PCI mem", CVPPC_FB_APERTURE_ONE, CVPPC_PCI_CONFIG, IORESOURCE_MEM };
void __init
apus_pcibios_fixup(void)
{
/* struct pci_dev *dev = pci_find_slot(0, 1<<3);
unsigned int reg, val, offset;*/
/* FIXME: interrupt? */
/*dev->interrupt = xxx;*/
request_resource(&iomem_resource, &pci_mem);
printk("%s: PCI mem resource requested\n", __FUNCTION__);
}
static void __init apus_pcibios_fixup_bus(struct pci_bus *bus)
{
bus->resource[1] = &pci_mem;
}
/*
* This is from pm2fb.c again
*
* Check if PCI (B/CVisionPPC) is available, initialize it and set up
* the pcibios_* pointers
*/
void __init
apus_setup_pci_ptrs(void)
{
if (!powerup_PCI_present) {
DPRINTK("no PCI bridge detected\n");
return;
}
DPRINTK("Phase5 B/CVisionPPC PCI bridge detected.\n");
apus_hose = pcibios_alloc_controller();
if (!apus_hose) {
printk("apus_pci: Can't allocate PCI controller structure\n");
return;
}
if (!(apus_hose->cfg_data = ioremap(CVPPC_PCI_CONFIG, 256))) {
printk("apus_pci: unable to map PCI config region\n");
return;
}
if (!(apus_hose->cfg_addr = ioremap(CSPPC_PCI_BRIDGE, 256))) {
printk("apus_pci: unable to map PCI bridge\n");
return;
}
writel(CSPPCF_BRIDGE_BIG_ENDIAN, apus_hose->cfg_addr + CSPPC_BRIDGE_ENDIAN);
DEFW();
writel(CVPPC_REGS_REGION, apus_hose->cfg_data+ PCI_BASE_ADDRESS_0);
DEFW();
writel(CVPPC_FB_APERTURE_ONE, apus_hose->cfg_data + PCI_BASE_ADDRESS_1);
DEFW();
writel(CVPPC_FB_APERTURE_TWO, apus_hose->cfg_data + PCI_BASE_ADDRESS_2);
DEFW();
writel(CVPPC_ROM_ADDRESS, apus_hose->cfg_data + PCI_ROM_ADDRESS);
DEFW();
writel(0xef000000 | PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
PCI_COMMAND_MASTER, apus_hose->cfg_data + PCI_COMMAND);
DEFW();
apus_hose->first_busno = 0;
apus_hose->last_busno = 0;
apus_hose->ops = &apus_pci_ops;
ppc_md.pcibios_fixup = apus_pcibios_fixup;
ppc_md.pcibios_fixup_bus = apus_pcibios_fixup_bus;
return;
}
#endif /* CONFIG_AMIGA */

34
arch/ppc/platforms/apus_pci.h
View File

@ -1,34 +0,0 @@
/*
* Phase5 CybervisionPPC (TVP4020) definitions for the Permedia2 framebuffer
* driver.
*
* Copyright (c) 1998-1999 Ilario Nardinocchi (nardinoc@CS.UniBO.IT)
* --------------------------------------------------------------------------
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file README.legal in the main directory of this archive
* for more details.
*/
#ifndef APUS_PCI_H
#define APUS_PCI_H
#define CSPPC_PCI_BRIDGE 0xfffe0000
#define CSPPC_BRIDGE_ENDIAN 0x0000
#define CSPPC_BRIDGE_INT 0x0010
#define CVPPC_PCI_CONFIG 0xfffc0000
#define CVPPC_ROM_ADDRESS 0xe2000001
#define CVPPC_REGS_REGION 0xef000000
#define CVPPC_FB_APERTURE_ONE 0xe0000000
#define CVPPC_FB_APERTURE_TWO 0xe1000000
#define CVPPC_FB_SIZE 0x00800000
/* CVPPC_BRIDGE_ENDIAN */
#define CSPPCF_BRIDGE_BIG_ENDIAN 0x02
/* CVPPC_BRIDGE_INT */
#define CSPPCF_BRIDGE_ACTIVE_INT2 0x01
#endif /* APUS_PCI_H */

798
arch/ppc/platforms/apus_setup.c
View File

@ -1,798 +0,0 @@
/*
* Copyright (C) 1998, 1999 Jesper Skov
*
* Basically what is needed to replace functionality found in
* arch/m68k allowing Amiga drivers to work under APUS.
* Bits of code and/or ideas from arch/m68k and arch/ppc files.
*
* TODO:
* This file needs a *really* good cleanup. Restructure and optimize.
* Make sure it can be compiled for non-APUS configs. Begin to move
* Amiga specific stuff into mach/amiga.
*/
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/init.h>
#include <linux/initrd.h>
#include <linux/seq_file.h>
/* Needs INITSERIAL call in head.S! */
#undef APUS_DEBUG
#include <asm/bootinfo.h>
#include <asm/setup.h>
#include <asm/amigahw.h>
#include <asm/amigaints.h>
#include <asm/amigappc.h>
#include <asm/pgtable.h>
#include <asm/dma.h>
#include <asm/machdep.h>
#include <asm/time.h>
unsigned long m68k_machtype;
char debug_device[6] = "";
extern void amiga_init_IRQ(void);
extern void apus_setup_pci_ptrs(void);
void (*mach_sched_init) (void (*handler)(int, void *, struct pt_regs *)) __initdata = NULL;
/* machine dependent irq functions */
void (*mach_init_IRQ) (void) __initdata = NULL;
void (*(*mach_default_handler)[]) (int, void *, struct pt_regs *) = NULL;
void (*mach_get_model) (char *model) = NULL;
int (*mach_get_hardware_list) (char *buffer) = NULL;
int (*mach_get_irq_list) (struct seq_file *, void *) = NULL;
void (*mach_process_int) (int, struct pt_regs *) = NULL;
/* machine dependent timer functions */
unsigned long (*mach_gettimeoffset) (void);
void (*mach_gettod) (int*, int*, int*, int*, int*, int*);
int (*mach_hwclk) (int, struct hwclk_time*) = NULL;
int (*mach_set_clock_mmss) (unsigned long) = NULL;
void (*mach_reset)( void );
long mach_max_dma_address = 0x00ffffff; /* default set to the lower 16MB */
#ifdef CONFIG_HEARTBEAT
void (*mach_heartbeat) (int) = NULL;
extern void apus_heartbeat (void);
#endif
extern unsigned long amiga_model;
extern unsigned decrementer_count;/* count value for 1e6/HZ microseconds */
extern unsigned count_period_num; /* 1 decrementer count equals */
extern unsigned count_period_den; /* count_period_num / count_period_den us */
int num_memory = 0;
struct mem_info memory[NUM_MEMINFO];/* memory description */
/* FIXME: Duplicate memory data to avoid conflicts with m68k shared code. */
int m68k_realnum_memory = 0;
struct mem_info m68k_memory[NUM_MEMINFO];/* memory description */
struct mem_info ramdisk;
extern void config_amiga(void);
static int __60nsram = 0;
/* for cpuinfo */
static int __bus_speed = 0;
static int __speed_test_failed = 0;
/********************************************** COMPILE PROTECTION */
/* Provide some stubs that links to Amiga specific functions.
* This allows CONFIG_APUS to be removed from generic PPC files while
* preventing link errors for other PPC targets.
*/
unsigned long apus_get_rtc_time(void)
{
#ifdef CONFIG_APUS
extern unsigned long m68k_get_rtc_time(void);
return m68k_get_rtc_time ();
#else
return 0;
#endif
}
int apus_set_rtc_time(unsigned long nowtime)
{
#ifdef CONFIG_APUS
extern int m68k_set_rtc_time(unsigned long nowtime);
return m68k_set_rtc_time (nowtime);
#else
return 0;
#endif
}
/*********************************************************** SETUP */
/* From arch/m68k/kernel/setup.c. */
void __init apus_setup_arch(void)
{
#ifdef CONFIG_APUS
extern char cmd_line[];
int i;
char *p, *q;
/* Let m68k-shared code know it should do the Amiga thing. */
m68k_machtype = MACH_AMIGA;
/* Parse the command line for arch-specific options.
* For the m68k, this is currently only "debug=xxx" to enable printing
* certain kernel messages to some machine-specific device. */
for( p = cmd_line; p && *p; ) {
i = 0;
if (!strncmp( p, "debug=", 6 )) {
strlcpy( debug_device, p+6, sizeof(debug_device) );
if ((q = strchr( debug_device, ' ' ))) *q = 0;
i = 1;
} else if (!strncmp( p, "60nsram", 7 )) {
APUS_WRITE (APUS_REG_WAITSTATE,
REGWAITSTATE_SETRESET
|REGWAITSTATE_PPCR
|REGWAITSTATE_PPCW);
__60nsram = 1;
i = 1;
}
if (i) {
/* option processed, delete it */
if ((q = strchr( p, ' ' )))
strcpy( p, q+1 );
else
*p = 0;
} else {
if ((p = strchr( p, ' ' ))) ++p;
}
}
config_amiga();
#if 0 /* Enable for logging - also include logging.o in Makefile rule */
{
#define LOG_SIZE 4096
void* base;
/* Throw away some memory - the P5 firmare stomps on top
* of CHIP memory during bootup.
*/
amiga_chip_alloc(0x1000);
base = amiga_chip_alloc(LOG_SIZE+sizeof(klog_data_t));
LOG_INIT(base, base+sizeof(klog_data_t), LOG_SIZE);
}
#endif
#endif
}
int
apus_show_cpuinfo(struct seq_file *m)
{
extern int __map_without_bats;
extern unsigned long powerup_PCI_present;
seq_printf(m, "machine\t\t: Amiga\n");
seq_printf(m, "bus speed\t: %d%s", __bus_speed,
(__speed_test_failed) ? " [failed]\n" : "\n");
seq_printf(m, "using BATs\t: %s\n",
(__map_without_bats) ? "No" : "Yes");
seq_printf(m, "ram speed\t: %dns\n", (__60nsram) ? 60 : 70);
seq_printf(m, "PCI bridge\t: %s\n",
(powerup_PCI_present) ? "Yes" : "No");
return 0;
}
static void get_current_tb(unsigned long long *time)
{
__asm __volatile ("1:mftbu 4 \n\t"
" mftb 5 \n\t"
" mftbu 6 \n\t"
" cmpw 4,6 \n\t"
" bne 1b \n\t"
" stw 4,0(%0)\n\t"
" stw 5,4(%0)\n\t"
:
: "r" (time)
: "r4", "r5", "r6");
}
void apus_calibrate_decr(void)
{
#ifdef CONFIG_APUS
unsigned long freq;
/* This algorithm for determining the bus speed was
contributed by Ralph Schmidt. */
unsigned long long start, stop;
int bus_speed;
int speed_test_failed = 0;
{
unsigned long loop = amiga_eclock / 10;
get_current_tb (&start);
while (loop--) {
unsigned char tmp;
tmp = ciaa.pra;
}
get_current_tb (&stop);
}
bus_speed = (((unsigned long)(stop-start))*10*4) / 1000000;
if (AMI_1200 == amiga_model)
bus_speed /= 2;
if ((bus_speed >= 47) && (bus_speed < 53)) {
bus_speed = 50;
freq = 12500000;
} else if ((bus_speed >= 57) && (bus_speed < 63)) {
bus_speed = 60;
freq = 15000000;
} else if ((bus_speed >= 63) && (bus_speed < 69)) {
bus_speed = 67;
freq = 16666667;
} else {
printk ("APUS: Unable to determine bus speed (%d). "
"Defaulting to 50MHz", bus_speed);
bus_speed = 50;
freq = 12500000;
speed_test_failed = 1;
}
/* Ease diagnostics... */
{
extern int __map_without_bats;
extern unsigned long powerup_PCI_present;
printk ("APUS: BATs=%d, BUS=%dMHz",
(__map_without_bats) ? 0 : 1,
bus_speed);
if (speed_test_failed)
printk ("[FAILED - please report]");
printk (", RAM=%dns, PCI bridge=%d\n",
(__60nsram) ? 60 : 70,
(powerup_PCI_present) ? 1 : 0);
/* print a bit more if asked politely... */
if (!(ciaa.pra & 0x40)){
extern unsigned int bat_addrs[4][3];
int b;
for (b = 0; b < 4; ++b) {
printk ("APUS: BAT%d ", b);
printk ("%08x-%08x -> %08x\n",
bat_addrs[b][0],
bat_addrs[b][1],
bat_addrs[b][2]);
}
}
}
printk("time_init: decrementer frequency = %lu.%.6lu MHz\n",
freq/1000000, freq%1000000);
tb_ticks_per_jiffy = freq / HZ;
tb_to_us = mulhwu_scale_factor(freq, 1000000);
__bus_speed = bus_speed;
__speed_test_failed = speed_test_failed;
#endif
}
void arch_gettod(int *year, int *mon, int *day, int *hour,
int *min, int *sec)
{
#ifdef CONFIG_APUS
if (mach_gettod)
mach_gettod(year, mon, day, hour, min, sec);
else
*year = *mon = *day = *hour = *min = *sec = 0;
#endif
}
/* for "kbd-reset" cmdline param */
__init
void kbd_reset_setup(char *str, int *ints)
{
}
/*********************************************************** MEMORY */
#define KMAP_MAX 32
unsigned long kmap_chunks[KMAP_MAX*3];
int kmap_chunk_count = 0;
/* From pgtable.h */
static __inline__ pte_t *my_find_pte(struct mm_struct *mm,unsigned long va)
{
pgd_t *dir = 0;
pmd_t *pmd = 0;
pte_t *pte = 0;
va &= PAGE_MASK;
dir = pgd_offset( mm, va );
if (dir)
{
pmd = pmd_offset(dir, va & PAGE_MASK);
if (pmd && pmd_present(*pmd))
{
pte = pte_offset(pmd, va);
}
}
return pte;
}
/* Again simulating an m68k/mm/kmap.c function. */
void kernel_set_cachemode( unsigned long address, unsigned long size,
unsigned int cmode )
{
unsigned long mask, flags;
switch (cmode)
{
case IOMAP_FULL_CACHING:
mask = ~(_PAGE_NO_CACHE | _PAGE_GUARDED);
flags = 0;
break;
case IOMAP_NOCACHE_SER:
mask = ~0;
flags = (_PAGE_NO_CACHE | _PAGE_GUARDED);
break;
default:
panic ("kernel_set_cachemode() doesn't support mode %d\n",
cmode);
break;
}
size /= PAGE_SIZE;
address &= PAGE_MASK;
while (size--)
{
pte_t *pte;
pte = my_find_pte(&init_mm, address);
if ( !pte )
{
printk("pte NULL in kernel_set_cachemode()\n");
return;
}
pte_val (*pte) &= mask;
pte_val (*pte) |= flags;
flush_tlb_page(find_vma(&init_mm,address),address);
address += PAGE_SIZE;
}
}
unsigned long mm_ptov (unsigned long paddr)
{
unsigned long ret;
if (paddr < 16*1024*1024)
ret = ZTWO_VADDR(paddr);
else {
int i;
for (i = 0; i < kmap_chunk_count;){
unsigned long phys = kmap_chunks[i++];
unsigned long size = kmap_chunks[i++];
unsigned long virt = kmap_chunks[i++];
if (paddr >= phys
&& paddr < (phys + size)){
ret = virt + paddr - phys;
goto exit;
}
}
ret = (unsigned long) __va(paddr);
}
exit:
#ifdef DEBUGPV
printk ("PTOV(%lx)=%lx\n", paddr, ret);
#endif
return ret;
}
int mm_end_of_chunk (unsigned long addr, int len)
{
if (memory[0].addr + memory[0].size == addr + len)
return 1;
return 0;
}
/*********************************************************** CACHE */
#define L1_CACHE_BYTES 32
#define MAX_CACHE_SIZE 8192
void cache_push(__u32 addr, int length)
{
addr = mm_ptov(addr);
if (MAX_CACHE_SIZE < length)
length = MAX_CACHE_SIZE;
while(length > 0){
__asm ("dcbf 0,%0\n\t"
: : "r" (addr));
addr += L1_CACHE_BYTES;
length -= L1_CACHE_BYTES;
}
/* Also flush trailing block */
__asm ("dcbf 0,%0\n\t"
"sync \n\t"
: : "r" (addr));
}
void cache_clear(__u32 addr, int length)
{
if (MAX_CACHE_SIZE < length)
length = MAX_CACHE_SIZE;
addr = mm_ptov(addr);
__asm ("dcbf 0,%0\n\t"
"sync \n\t"
"icbi 0,%0 \n\t"
"isync \n\t"
: : "r" (addr));
addr += L1_CACHE_BYTES;
length -= L1_CACHE_BYTES;
while(length > 0){
__asm ("dcbf 0,%0\n\t"
"sync \n\t"
"icbi 0,%0 \n\t"
"isync \n\t"
: : "r" (addr));
addr += L1_CACHE_BYTES;
length -= L1_CACHE_BYTES;
}
__asm ("dcbf 0,%0\n\t"
"sync \n\t"
"icbi 0,%0 \n\t"
"isync \n\t"
: : "r" (addr));
}
/****************************************************** from setup.c */
void
apus_restart(char *cmd)
{
local_irq_disable();
APUS_WRITE(APUS_REG_LOCK,
REGLOCK_BLACKMAGICK1|REGLOCK_BLACKMAGICK2);
APUS_WRITE(APUS_REG_LOCK,
REGLOCK_BLACKMAGICK1|REGLOCK_BLACKMAGICK3);
APUS_WRITE(APUS_REG_LOCK,
REGLOCK_BLACKMAGICK2|REGLOCK_BLACKMAGICK3);
APUS_WRITE(APUS_REG_SHADOW, REGSHADOW_SELFRESET);
APUS_WRITE(APUS_REG_RESET, REGRESET_AMIGARESET);
for(;;);
}
void
apus_power_off(void)
{
for (;;);
}
void
apus_halt(void)
{
apus_restart(NULL);
}
/****************************************************** IRQ stuff */
static unsigned char last_ipl[8];
int apus_get_irq(void)
{
unsigned char ipl_emu, mask;
unsigned int level;
APUS_READ(APUS_IPL_EMU, ipl_emu);
level = (ipl_emu >> 3) & IPLEMU_IPLMASK;
mask = IPLEMU_SETRESET|IPLEMU_DISABLEINT|level;
level ^= 7;
/* Save previous IPL value */
if (last_ipl[level])
return -2;
last_ipl[level] = ipl_emu;
/* Set to current IPL value */
APUS_WRITE(APUS_IPL_EMU, mask);
APUS_WRITE(APUS_IPL_EMU, IPLEMU_DISABLEINT|level);
#ifdef __INTERRUPT_DEBUG
printk("<%d:%d>", level, ~ipl_emu & IPLEMU_IPLMASK);
#endif
return level + IRQ_AMIGA_AUTO;
}
void apus_end_irq(unsigned int irq)
{
unsigned char ipl_emu;
unsigned int level = irq - IRQ_AMIGA_AUTO;
#ifdef __INTERRUPT_DEBUG
printk("{%d}", ~last_ipl[level] & IPLEMU_IPLMASK);
#endif
/* Restore IPL to the previous value */
ipl_emu = last_ipl[level] & IPLEMU_IPLMASK;
APUS_WRITE(APUS_IPL_EMU, IPLEMU_SETRESET|IPLEMU_DISABLEINT|ipl_emu);
last_ipl[level] = 0;
ipl_emu ^= 7;
APUS_WRITE(APUS_IPL_EMU, IPLEMU_DISABLEINT|ipl_emu);
}
/****************************************************** debugging */
/* some serial hardware definitions */
#define SDR_OVRUN (1<<15)
#define SDR_RBF (1<<14)
#define SDR_TBE (1<<13)
#define SDR_TSRE (1<<12)
#define AC_SETCLR (1<<15)
#define AC_UARTBRK (1<<11)
#define SER_DTR (1<<7)
#define SER_RTS (1<<6)
#define SER_DCD (1<<5)
#define SER_CTS (1<<4)
#define SER_DSR (1<<3)
static __inline__ void ser_RTSon(void)
{
ciab.pra &= ~SER_RTS; /* active low */
}
int __debug_ser_out( unsigned char c )
{
amiga_custom.serdat = c | 0x100;
mb();
while (!(amiga_custom.serdatr & 0x2000))
barrier();
return 1;
}
unsigned char __debug_ser_in( void )
{
unsigned char c;
/* XXX: is that ok?? derived from amiga_ser.c... */
while( !(amiga_custom.intreqr & IF_RBF) )
barrier();
c = amiga_custom.serdatr;
/* clear the interrupt, so that another character can be read */
amiga_custom.intreq = IF_RBF;
return c;
}
int __debug_serinit( void )
{
unsigned long flags;
local_irq_save(flags);
/* turn off Rx and Tx interrupts */
amiga_custom.intena = IF_RBF | IF_TBE;
/* clear any pending interrupt */
amiga_custom.intreq = IF_RBF | IF_TBE;
local_irq_restore(flags);
/*
* set the appropriate directions for the modem control flags,
* and clear RTS and DTR
*/
ciab.ddra |= (SER_DTR | SER_RTS); /* outputs */
ciab.ddra &= ~(SER_DCD | SER_CTS | SER_DSR); /* inputs */
#ifdef CONFIG_KGDB
/* turn Rx interrupts on for GDB */
amiga_custom.intena = IF_SETCLR | IF_RBF;
ser_RTSon();
#endif
return 0;
}
void __debug_print_hex(unsigned long x)
{
int i;
char hexchars[] = "0123456789ABCDEF";
for (i = 0; i < 8; i++) {
__debug_ser_out(hexchars[(x >> 28) & 15]);
x <<= 4;
}
__debug_ser_out('\n');
__debug_ser_out('\r');
}
void __debug_print_string(char* s)
{
unsigned char c;
while((c = *s++))
__debug_ser_out(c);
__debug_ser_out('\n');
__debug_ser_out('\r');
}
static void apus_progress(char *s, unsigned short value)
{
__debug_print_string(s);
}
/****************************************************** init */
/* The number of spurious interrupts */
volatile unsigned int num_spurious;
extern struct irqaction amiga_sys_irqaction[AUTO_IRQS];
extern void amiga_enable_irq(unsigned int irq);
extern void amiga_disable_irq(unsigned int irq);
struct hw_interrupt_type amiga_sys_irqctrl = {
.typename = "Amiga IPL",
.end = apus_end_irq,
};
struct hw_interrupt_type amiga_irqctrl = {
.typename = "Amiga ",
.enable = amiga_enable_irq,
.disable = amiga_disable_irq,
};
#define HARDWARE_MAPPED_SIZE (512*1024)
unsigned long __init apus_find_end_of_memory(void)
{
int shadow = 0;
unsigned long total;
/* The memory size reported by ADOS excludes the 512KB
reserved for PPC exception registers and possibly 512KB
containing a shadow of the ADOS ROM. */
{
unsigned long size = memory[0].size;
/* If 2MB aligned, size was probably user
specified. We can't tell anything about shadowing
in this case so skip shadow assignment. */
if (0 != (size & 0x1fffff)){
/* Align to 512KB to ensure correct handling
of both memfile and system specified
sizes. */
size = ((size+0x0007ffff) & 0xfff80000);
/* If memory is 1MB aligned, assume
shadowing. */
shadow = !(size & 0x80000);
}
/* Add the chunk that ADOS does not see. by aligning
the size to the nearest 2MB limit upwards. */
memory[0].size = ((size+0x001fffff) & 0xffe00000);
}
ppc_memstart = memory[0].addr;
ppc_memoffset = PAGE_OFFSET - PPC_MEMSTART;
total = memory[0].size;
/* Remove the memory chunks that are controlled by special
Phase5 hardware. */
/* Remove the upper 512KB if it contains a shadow of
the ADOS ROM. FIXME: It might be possible to
disable this shadow HW. Check the booter
(ppc_boot.c) */
if (shadow)
total -= HARDWARE_MAPPED_SIZE;
/* Remove the upper 512KB where the PPC exception
vectors are mapped. */
total -= HARDWARE_MAPPED_SIZE;
/* Linux/APUS only handles one block of memory -- the one on
the PowerUP board. Other system memory is horrible slow in
comparison. The user can use other memory for swapping
using the z2ram device. */
return total;
}
static void __init
apus_map_io(void)
{
/* Map PPC exception vectors. */
io_block_mapping(0xfff00000, 0xfff00000, 0x00020000, _PAGE_KERNEL);
/* Map chip and ZorroII memory */
io_block_mapping(zTwoBase, 0x00000000, 0x01000000, _PAGE_IO);
}
__init
void apus_init_IRQ(void)
{
struct irqaction *action;
int i;
#ifdef CONFIG_PCI
apus_setup_pci_ptrs();
#endif
for ( i = 0 ; i < AMI_IRQS; i++ ) {
irq_desc[i].status = IRQ_LEVEL;
if (i < IRQ_AMIGA_AUTO) {
irq_desc[i].chip = &amiga_irqctrl;
} else {
irq_desc[i].chip = &amiga_sys_irqctrl;
action = &amiga_sys_irqaction[i-IRQ_AMIGA_AUTO];
if (action->name)
setup_irq(i, action);
}
}
amiga_init_IRQ();
}
__init
void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
unsigned long r6, unsigned long r7)
{
extern int parse_bootinfo(const struct bi_record *);
extern char _end[];
/* Parse bootinfo. The bootinfo is located right after
the kernel bss */
parse_bootinfo((const struct bi_record *)&_end);
#ifdef CONFIG_BLK_DEV_INITRD
/* Take care of initrd if we have one. Use data from
bootinfo to avoid the need to initialize PPC
registers when kernel is booted via a PPC reset. */
if ( ramdisk.addr ) {
initrd_start = (unsigned long) __va(ramdisk.addr);
initrd_end = (unsigned long)
__va(ramdisk.size + ramdisk.addr);
}
#endif /* CONFIG_BLK_DEV_INITRD */
ISA_DMA_THRESHOLD = 0x00ffffff;
ppc_md.setup_arch = apus_setup_arch;
ppc_md.show_cpuinfo = apus_show_cpuinfo;
ppc_md.init_IRQ = apus_init_IRQ;
ppc_md.get_irq = apus_get_irq;
#ifdef CONFIG_HEARTBEAT
ppc_md.heartbeat = apus_heartbeat;
ppc_md.heartbeat_count = 1;
#endif
#ifdef APUS_DEBUG
__debug_serinit();
ppc_md.progress = apus_progress;
#endif
ppc_md.init = NULL;
ppc_md.restart = apus_restart;
ppc_md.power_off = apus_power_off;
ppc_md.halt = apus_halt;
ppc_md.time_init = NULL;
ppc_md.set_rtc_time = apus_set_rtc_time;
ppc_md.get_rtc_time = apus_get_rtc_time;
ppc_md.calibrate_decr = apus_calibrate_decr;
ppc_md.find_end_of_memory = apus_find_end_of_memory;
ppc_md.setup_io_mappings = apus_map_io;
}

2
include/asm-powerpc/ide.h
View File

@ -67,7 +67,7 @@ static __inline__ unsigned long ide_default_io_base(int index)
#define ide_init_default_irq(base) ide_default_irq(base)
#endif
#if (defined CONFIG_APUS || defined CONFIG_BLK_DEV_MPC8xx_IDE )
#ifdef CONFIG_BLK_DEV_MPC8xx_IDE
#define IDE_ARCH_ACK_INTR 1
#define ide_ack_intr(hwif) (hwif->hw.ack_intr ? hwif->hw.ack_intr(hwif) : 1)
#endif

4
include/asm-powerpc/reg.h
View File

@ -102,12 +102,8 @@
#else /* 32-bit */
/* Default MSR for kernel mode. */
#ifndef MSR_KERNEL /* reg_booke.h also defines this */
#ifdef CONFIG_APUS_FAST_EXCEPT
#define MSR_KERNEL (MSR_ME|MSR_IP|MSR_RI|MSR_IR|MSR_DR)
#else
#define MSR_KERNEL (MSR_ME|MSR_RI|MSR_IR|MSR_DR)
#endif
#endif
#define MSR_USER (MSR_KERNEL|MSR_PR|MSR_EE)
#endif

16
include/asm-ppc/amigahw.h
View File

@ -1,16 +0,0 @@
#ifdef __KERNEL__
#ifndef __ASMPPC_AMIGAHW_H
#define __ASMPPC_AMIGAHW_H
#include <asm-m68k/amigahw.h>
#undef CHIP_PHYSADDR
#ifdef CONFIG_APUS_FAST_EXCEPT
#define CHIP_PHYSADDR (0x000000)
#else
#define CHIP_PHYSADDR (0x004000)
#endif
#endif /* __ASMPPC_AMIGAHW_H */
#endif /* __KERNEL__ */

133
include/asm-ppc/amigaints.h
View File

@ -1,133 +0,0 @@
/*
** amigaints.h -- Amiga Linux interrupt handling structs and prototypes
**
** Copyright 1992 by Greg Harp
**
** This file is subject to the terms and conditions of the GNU General Public
** License. See the file COPYING in the main directory of this archive
** for more details.
**
** Created 10/2/92 by Greg Harp
*/
#ifdef __KERNEL__
#ifndef _ASMm68k_AMIGAINTS_H_
#define _ASMm68k_AMIGAINTS_H_
/*
** Amiga Interrupt sources.
**
*/
#define AUTO_IRQS (8)
#define AMI_STD_IRQS (14)
#define CIA_IRQS (5)
#define AMI_IRQS (32) /* AUTO_IRQS+AMI_STD_IRQS+2*CIA_IRQS */
/* vertical blanking interrupt */
#define IRQ_AMIGA_VERTB 0
/* copper interrupt */
#define IRQ_AMIGA_COPPER 1
/* Audio interrupts */
#define IRQ_AMIGA_AUD0 2
#define IRQ_AMIGA_AUD1 3
#define IRQ_AMIGA_AUD2 4
#define IRQ_AMIGA_AUD3 5
/* Blitter done interrupt */
#define IRQ_AMIGA_BLIT 6
/* floppy disk interrupts */
#define IRQ_AMIGA_DSKSYN 7
#define IRQ_AMIGA_DSKBLK 8
/* builtin serial port interrupts */
#define IRQ_AMIGA_RBF 9
#define IRQ_AMIGA_TBE 10
/* software interrupts */
#define IRQ_AMIGA_SOFT 11
/* interrupts from external hardware */
#define IRQ_AMIGA_PORTS 12
#define IRQ_AMIGA_EXTER 13
/* CIA interrupt sources */
#define IRQ_AMIGA_CIAA 14
#define IRQ_AMIGA_CIAA_TA 14
#define IRQ_AMIGA_CIAA_TB 15
#define IRQ_AMIGA_CIAA_ALRM 16
#define IRQ_AMIGA_CIAA_SP 17
#define IRQ_AMIGA_CIAA_FLG 18
#define IRQ_AMIGA_CIAB 19
#define IRQ_AMIGA_CIAB_TA 19
#define IRQ_AMIGA_CIAB_TB 20
#define IRQ_AMIGA_CIAB_ALRM 21
#define IRQ_AMIGA_CIAB_SP 22
#define IRQ_AMIGA_CIAB_FLG 23
/* auto-vector interrupts */
#define IRQ_AMIGA_AUTO 24
#define IRQ_AMIGA_AUTO_0 24 /* This is just a dummy */
#define IRQ_AMIGA_AUTO_1 25
#define IRQ_AMIGA_AUTO_2 26
#define IRQ_AMIGA_AUTO_3 27
#define IRQ_AMIGA_AUTO_4 28
#define IRQ_AMIGA_AUTO_5 29
#define IRQ_AMIGA_AUTO_6 30
#define IRQ_AMIGA_AUTO_7 31
#define IRQ_FLOPPY IRQ_AMIGA_DSKBLK
/* INTREQR masks */
#define IRQ1_MASK 0x0007 /* INTREQR mask for IRQ 1 */
#define IRQ2_MASK 0x0008 /* INTREQR mask for IRQ 2 */
#define IRQ3_MASK 0x0070 /* INTREQR mask for IRQ 3 */
#define IRQ4_MASK 0x0780 /* INTREQR mask for IRQ 4 */
#define IRQ5_MASK 0x1800 /* INTREQR mask for IRQ 5 */
#define IRQ6_MASK 0x2000 /* INTREQR mask for IRQ 6 */
#define IRQ7_MASK 0x4000 /* INTREQR mask for IRQ 7 */
#define IF_SETCLR 0x8000 /* set/clr bit */
#define IF_INTEN 0x4000 /* master interrupt bit in INT* registers */
#define IF_EXTER 0x2000 /* external level 6 and CIA B interrupt */
#define IF_DSKSYN 0x1000 /* disk sync interrupt */
#define IF_RBF 0x0800 /* serial receive buffer full interrupt */
#define IF_AUD3 0x0400 /* audio channel 3 done interrupt */
#define IF_AUD2 0x0200 /* audio channel 2 done interrupt */
#define IF_AUD1 0x0100 /* audio channel 1 done interrupt */
#define IF_AUD0 0x0080 /* audio channel 0 done interrupt */
#define IF_BLIT 0x0040 /* blitter done interrupt */
#define IF_VERTB 0x0020 /* vertical blanking interrupt */
#define IF_COPER 0x0010 /* copper interrupt */
#define IF_PORTS 0x0008 /* external level 2 and CIA A interrupt */
#define IF_SOFT 0x0004 /* software initiated interrupt */
#define IF_DSKBLK 0x0002 /* diskblock DMA finished */
#define IF_TBE 0x0001 /* serial transmit buffer empty interrupt */
extern void amiga_do_irq(int irq, struct pt_regs *fp);
extern void amiga_do_irq_list(int irq, struct pt_regs *fp);
/* CIA interrupt control register bits */
#define CIA_ICR_TA 0x01
#define CIA_ICR_TB 0x02
#define CIA_ICR_ALRM 0x04
#define CIA_ICR_SP 0x08
#define CIA_ICR_FLG 0x10
#define CIA_ICR_ALL 0x1f
#define CIA_ICR_SETCLR 0x80
/* to access the interrupt control registers of CIA's use only
** these functions, they behave exactly like the amiga os routines
*/
extern struct ciabase ciaa_base, ciab_base;
extern unsigned char cia_set_irq(unsigned int irq, int set);
extern unsigned char cia_able_irq(unsigned int irq, int enable);
#endif /* asm-m68k/amigaints.h */
#endif /* __KERNEL__ */

85
include/asm-ppc/amigappc.h
View File

@ -1,85 +0,0 @@
/*
** asm-ppc/amigappc.h -- This header defines some values and pointers for
** the Phase 5 PowerUp card.
**
** Copyright 1997, 1998 by Phase5, Germany.
**
** This file is subject to the terms and conditions of the GNU General Public
** License. See the file COPYING in the main directory of this archive
** for more details.
**
** Created: 7/22/97 by Jesper Skov
*/
#ifdef __KERNEL__
#ifndef _M68K_AMIGAPPC_H
#define _M68K_AMIGAPPC_H
#ifndef __ASSEMBLY__
/* #include <asm/system.h> */
#define mb() __asm__ __volatile__ ("sync" : : : "memory")
#define APUS_WRITE(_a_, _v_) \
do { \
(*((volatile unsigned char *)(_a_)) = (_v_)); \
mb(); \
} while (0)
#define APUS_READ(_a_, _v_) \
do { \
(_v_) = (*((volatile unsigned char *)(_a_))); \
mb(); \
} while (0)
#endif /* ndef __ASSEMBLY__ */
/* Maybe add a [#ifdef WANT_ZTWOBASE] condition to amigahw.h? */
#define zTwoBase (0x80000000)
#define APUS_IPL_BASE (zTwoBase + 0x00f60000)
#define APUS_REG_RESET (APUS_IPL_BASE + 0x00)
#define APUS_REG_WAITSTATE (APUS_IPL_BASE + 0x10)
#define APUS_REG_SHADOW (APUS_IPL_BASE + 0x18)
#define APUS_REG_LOCK (APUS_IPL_BASE + 0x20)
#define APUS_REG_INT (APUS_IPL_BASE + 0x28)
#define APUS_IPL_EMU (APUS_IPL_BASE + 0x30)
#define APUS_INT_LVL (APUS_IPL_BASE + 0x38)
#define REGSHADOW_SETRESET (0x80)
#define REGSHADOW_SELFRESET (0x40)
#define REGLOCK_SETRESET (0x80)
#define REGLOCK_BLACKMAGICK1 (0x40)
#define REGLOCK_BLACKMAGICK2 (0x20)
#define REGLOCK_BLACKMAGICK3 (0x10)
#define REGWAITSTATE_SETRESET (0x80)
#define REGWAITSTATE_PPCW (0x08)
#define REGWAITSTATE_PPCR (0x04)
#define REGRESET_SETRESET (0x80)
#define REGRESET_PPCRESET (0x10)
#define REGRESET_M68KRESET (0x08)
#define REGRESET_AMIGARESET (0x04)
#define REGRESET_AUXRESET (0x02)
#define REGRESET_SCSIRESET (0x01)
#define REGINT_SETRESET (0x80)
#define REGINT_ENABLEIPL (0x02)
#define REGINT_INTMASTER (0x01)
#define IPLEMU_SETRESET (0x80)
#define IPLEMU_DISABLEINT (0x40)
#define IPLEMU_IPL2 (0x20)
#define IPLEMU_IPL1 (0x10)
#define IPLEMU_IPL0 (0x08)
#define IPLEMU_PPCIPL2 (0x04)
#define IPLEMU_PPCIPL1 (0x02)
#define IPLEMU_PPCIPL0 (0x01)
#define IPLEMU_IPLMASK (IPLEMU_PPCIPL2|IPLEMU_PPCIPL1|IPLEMU_PPCIPL0)
#define INTLVL_SETRESET (0x80)
#define INTLVL_MASK (0x7f)
#endif /* _M68k_AMIGAPPC_H */
#endif /* __KERNEL__ */

5
include/asm-ppc/bootinfo.h
View File

@ -11,10 +11,6 @@
#include <asm/page.h>
#if defined(CONFIG_APUS) && !defined(__BOOTER__)
#include <asm-m68k/bootinfo.h>
#else
struct bi_record {
unsigned long tag; /* tag ID */
unsigned long size; /* size of record (in bytes) */
@ -44,7 +40,6 @@ bootinfo_addr(unsigned long offset)
return (struct bi_record *)_ALIGN((offset) + (1 << 20) - 1,
(1 << 20));
}
#endif /* CONFIG_APUS */
#endif /* _PPC_BOOTINFO_H */

48
include/asm-ppc/io.h
View File

@ -30,7 +30,7 @@
#include <asm/mpc8xx.h>
#elif defined(CONFIG_8260)
#include <asm/mpc8260.h>
#elif defined(CONFIG_APUS) || !defined(CONFIG_PCI)
#elif !defined(CONFIG_PCI)
#define _IO_BASE 0
#define _ISA_MEM_BASE 0
#define PCI_DRAM_OFFSET 0
@ -145,24 +145,7 @@ static inline void writeb(__u8 b, volatile void __iomem *addr)
}
#endif
#if defined(CONFIG_APUS)
static inline __u16 readw(const volatile void __iomem *addr)
{
return *(__force volatile __u16 *)(addr);
}
static inline __u32 readl(const volatile void __iomem *addr)
{
return *(__force volatile __u32 *)(addr);
}
static inline void writew(__u16 b, volatile void __iomem *addr)
{
*(__force volatile __u16 *)(addr) = b;
}
static inline void writel(__u32 b, volatile void __iomem *addr)
{
*(__force volatile __u32 *)(addr) = b;
}
#elif defined (CONFIG_8260_PCI9)
#if defined (CONFIG_8260_PCI9)
/* Use macros if PCI9 workaround enabled */
#define readw(addr) in_le16((volatile u16 *)(addr))
#define readl(addr) in_le32((volatile u32 *)(addr))
@ -185,7 +168,7 @@ static inline void writel(__u32 b, volatile void __iomem *addr)
{
out_le32(addr, b);
}
#endif /* CONFIG_APUS */
#endif /* CONFIG_8260_PCI9 */
#define readb_relaxed(addr) readb(addr)
#define readw_relaxed(addr) readw(addr)
@ -300,13 +283,7 @@ extern __inline__ void name(unsigned int val, unsigned int port) \
}
__do_out_asm(outb, "stbx")
#ifdef CONFIG_APUS
__do_in_asm(inb, "lbzx")
__do_in_asm(inw, "lhz%U1%X1")
__do_in_asm(inl, "lwz%U1%X1")
__do_out_asm(outl,"stw%U0%X0")
__do_out_asm(outw, "sth%U0%X0")
#elif defined (CONFIG_8260_PCI9)
#if defined (CONFIG_8260_PCI9)
/* in asm cannot be defined if PCI9 workaround is used */
#define inb(port) in_8((port)+___IO_BASE)
#define inw(port) in_le16((port)+___IO_BASE)
@ -371,7 +348,6 @@ extern void __iomem *ioremap64(unsigned long long address, unsigned long size);
#define ioremap_nocache(addr, size) ioremap((addr), (size))
extern void iounmap(volatile void __iomem *addr);
extern unsigned long iopa(unsigned long addr);
extern unsigned long mm_ptov(unsigned long addr) __attribute_const__;
extern void io_block_mapping(unsigned long virt, phys_addr_t phys,
unsigned int size, int flags);
@ -384,24 +360,16 @@ extern void io_block_mapping(unsigned long virt, phys_addr_t phys,
*/
extern inline unsigned long virt_to_bus(volatile void * address)
{
#ifndef CONFIG_APUS
if (address == (void *)0)
return 0;
return (unsigned long)address - KERNELBASE + PCI_DRAM_OFFSET;
#else
return iopa ((unsigned long) address);
#endif
}
extern inline void * bus_to_virt(unsigned long address)
{
#ifndef CONFIG_APUS
if (address == 0)
return NULL;
return (void *)(address - PCI_DRAM_OFFSET + KERNELBASE);
#else
return (void*) mm_ptov (address);
#endif
}
/*
@ -410,20 +378,12 @@ extern inline void * bus_to_virt(unsigned long address)
*/
extern inline unsigned long virt_to_phys(volatile void * address)
{
#ifndef CONFIG_APUS
return (unsigned long) address - KERNELBASE;
#else
return iopa ((unsigned long) address);
#endif
}
extern inline void * phys_to_virt(unsigned long address)
{
#ifndef CONFIG_APUS
return (void *) (address + KERNELBASE);
#else
return (void*) mm_ptov (address);
#endif
}
/*

4
include/asm-ppc/machdep.h
View File

@ -8,10 +8,6 @@
#include <asm/setup.h>
#include <asm/page.h>
#ifdef CONFIG_APUS
#include <asm-m68k/machdep.h>
#endif
struct pt_regs;
struct pci_bus;
struct pci_dev;

44
include/asm-ppc/page.h
View File

@ -97,62 +97,22 @@ extern void clear_user_page(void *page, unsigned long vaddr, struct page *pg);
extern void copy_user_page(void *to, void *from, unsigned long vaddr,
struct page *pg);
#ifndef CONFIG_APUS
#define PPC_MEMSTART 0
#define PPC_PGSTART 0
#define PPC_MEMOFFSET PAGE_OFFSET
#else
extern unsigned long ppc_memstart;
extern unsigned long ppc_pgstart;
extern unsigned long ppc_memoffset;
#define PPC_MEMSTART ppc_memstart
#define PPC_PGSTART ppc_pgstart
#define PPC_MEMOFFSET ppc_memoffset
#endif
#if defined(CONFIG_APUS) && !defined(MODULE)
/* map phys->virtual and virtual->phys for RAM pages */
static inline unsigned long ___pa(unsigned long v)
{
unsigned long p;
asm volatile ("1: addis %0, %1, %2;"
".section \".vtop_fixup\",\"aw\";"
".align 1;"
".long 1b;"
".previous;"
: "=r" (p)
: "b" (v), "K" (((-PAGE_OFFSET) >> 16) & 0xffff));
return p;
}
static inline void* ___va(unsigned long p)
{
unsigned long v;
asm volatile ("1: addis %0, %1, %2;"
".section \".ptov_fixup\",\"aw\";"
".align 1;"
".long 1b;"
".previous;"
: "=r" (v)
: "b" (p), "K" (((PAGE_OFFSET) >> 16) & 0xffff));
return (void*) v;
}
#else
#define ___pa(vaddr) ((vaddr)-PPC_MEMOFFSET)
#define ___va(paddr) ((paddr)+PPC_MEMOFFSET)
#endif
extern int page_is_ram(unsigned long pfn);
#define __pa(x) ___pa((unsigned long)(x))
#define __va(x) ((void *)(___va((unsigned long)(x))))
#define ARCH_PFN_OFFSET (PPC_PGSTART)
#define ARCH_PFN_OFFSET 0
#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
#define page_to_virt(page) __va(page_to_pfn(page) << PAGE_SHIFT)
#define pfn_valid(pfn) (((pfn) - PPC_PGSTART) < max_mapnr)
#define pfn_valid(pfn) ((pfn) < max_mapnr)
#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
/* Pure 2^n version of get_order */

8
include/asm-ppc/pgtable.h
View File

@ -765,14 +765,6 @@ extern void paging_init(void);
#define pte_to_pgoff(pte) (pte_val(pte) >> 3)
#define pgoff_to_pte(off) ((pte_t) { ((off) << 3) | _PAGE_FILE })
/* CONFIG_APUS */
/* For virtual address to physical address conversion */
extern void cache_clear(__u32 addr, int length);
extern void cache_push(__u32 addr, int length);
extern int mm_end_of_chunk (unsigned long addr, int len);
extern unsigned long iopa(unsigned long addr);
extern unsigned long mm_ptov(unsigned long addr) __attribute_const__;
/* Values for nocacheflag and cmode */
/* These are not used by the APUS kernel_map, but prevents
compilation errors. */