hwmon: (pmbus) Add a PMBUS_NO_CAPABILITY platform data flag

Some PMBus chips don't respond with valid data when reading the
CAPABILITY register. Add a flag that device drivers can set so
that the PMBus core driver doesn't use CAPABILITY to determine it's
behavior.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20201222152640.27749-2-eajames@linux.ibm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This commit is contained in:
Eddie James 2020-12-22 09:26:39 -06:00 committed by Guenter Roeck
parent c8d0d3fa94
commit e5befc024c
2 changed files with 14 additions and 3 deletions

View File

@ -2204,9 +2204,11 @@ static int pmbus_init_common(struct i2c_client *client, struct pmbus_data *data,
}
/* Enable PEC if the controller supports it */
ret = i2c_smbus_read_byte_data(client, PMBUS_CAPABILITY);
if (ret >= 0 && (ret & PB_CAPABILITY_ERROR_CHECK))
client->flags |= I2C_CLIENT_PEC;
if (!(data->flags & PMBUS_NO_CAPABILITY)) {
ret = i2c_smbus_read_byte_data(client, PMBUS_CAPABILITY);
if (ret >= 0 && (ret & PB_CAPABILITY_ERROR_CHECK))
client->flags |= I2C_CLIENT_PEC;
}
/*
* Check if the chip is write protected. If it is, we can not clear

View File

@ -34,6 +34,15 @@
*/
#define PMBUS_WRITE_PROTECTED BIT(1)
/*
* PMBUS_NO_CAPABILITY
*
* Some PMBus chips don't respond with valid data when reading the CAPABILITY
* register. For such chips, this flag should be set so that the PMBus core
* driver doesn't use CAPABILITY to determine it's behavior.
*/
#define PMBUS_NO_CAPABILITY BIT(2)
struct pmbus_platform_data {
u32 flags; /* Device specific flags */