== Changes to existing drivers ==

- Use of managed resources - omap, twl4030, ti_am335x_tscadc
    - Advanced error handling - omap
    - Rework clk management - omap
    - Device Tree (re-)work - tc3589x, pm8921, da9055, sec
    - IRC management overhaul and !BROKEN - pm8921
    - Convert to regmap - ssbi, pm8921
    - Use simple power-management ops - ucb1x00
    - Include file clean-up - adp5520, cs5535, janz, lpc_ich,
       - lpc_sch, max14577, mcp-sa11x0, pcf50633-adc, rc5t583,
       	rdc321x-southbridge, retu, smsc-ece1099, ti-ssp, ti_am335x_tscadc,
 	tps65912, vexpress-config, wm8350, ywm8350
    - Various bug fixes across the subsystem
       - NULL/invalid pointer dereference prevention
       - Resource leak mitigation,
       - Variable used initialised
       - Staticise various containers
       - Enforce return value checks
 
  == New drivers/supported devices ==
    - Add support for s2mps14 and s2mpa01 to sec
    - Add support for da9063 (v5) to da9063
    - Add support for atom-c2000 to gpio-ich
    - Add support for come-{mbt10,cbt6,chl6} to kempld
    - Add support for da9053 to da9052
    - Add support for itco-wdt (v3) and baytrail to lpc_ich
    - Add new drivers for tps65218, rtsx_usb, bcm590xx
 
  == (Re-)moved drivers ==
    - twl4030 ==> drivers/iio
    - ti-ssp  ==> /dev/null
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJTQmHbAAoJEFGvii+H/HdhXgAQAI6dNLb3AfNol49pNh5nEcrt
 sixQwu56xe64xozcMq41oXcbIe6NOvd/Sgf57fowCqrNyXd3k2sp6/KzA1yM8yfc
 2Xfm2fzzMoyH3lEopepT0zKMEyeOKxCNJWInXjRDmR6EN8szV/gAvwEptXnXKq8n
 sANQCBr2A1sDAlxu5onDI6SGEibCZgSsW+EElPyNKjXyIXdATv+ZLSuNCapt2Zg2
 H/KM+CY2hlcl6quWwjEUtPF4Ux0hIv3ePkwDKQicXMgndxL3+aL5L66UHsIovgxW
 o9H2aA6cfOQJuAXAZUvHlsNlefFW5qpFFR8kXiW87Say3+7nijoe5DhH/RBSZN+i
 O0rbxWVa1rW9eYmHuKAPNMR8Lp4FN9OvBo/Yv3UfmMV661vLVLOvTwJI9GZg7v8o
 UPMDhYNgEnRNrWqf7Wkj9ywgvGaO8qggm7gpE2cFD8DGDR7aZQ9goRKpaVSjTNmW
 4staek1u4g7YQ9s2UXxQ0JFc7esMbUbXxv5Bmk+4JPiI3P4gDMTg7jhh5iKDcEs5
 BVUIfdYKF9LInfYT3o9Uvo6TbYeAfwwzOdMFDWa5BjGOCLD9ttOEGtqMD/bkANbn
 YsaD6xKEL+su37CocSPnekgU+IS0uLb15jpa06CmoaALPGAZcRffKMygSHtlyGtR
 pNazlO93tu9JXQcL5B+A
 =p4SP
 -----END PGP SIGNATURE-----

Merge tag 'mfd-for-linus-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "Changes to existing drivers:
   - Use of managed resources - omap, twl4030, ti_am335x_tscadc
   - Advanced error handling - omap
   - Rework clk management - omap
   - Device Tree (re-)work - tc3589x, pm8921, da9055, sec
   - IRC management overhaul and !BROKEN - pm8921
   - Convert to regmap - ssbi, pm8921
   - Use simple power-management ops - ucb1x00
   - Include file clean-up - adp5520, cs5535, janz, lpc_ich,
      - lpc_sch, max14577, mcp-sa11x0, pcf50633-adc, rc5t583,
      	rdc321x-southbridge, retu, smsc-ece1099, ti-ssp, ti_am335x_tscadc,
	tps65912, vexpress-config, wm8350, ywm8350
   - Various bug fixes across the subsystem
      - NULL/invalid pointer dereference prevention
      - Resource leak mitigation,
      - Variable used initialised
      - Staticise various containers
      - Enforce return value checks

  New drivers/supported devices:
   - Add support for s2mps14 and s2mpa01 to sec
   - Add support for da9063 (v5) to da9063
   - Add support for atom-c2000 to gpio-ich
   - Add support for come-{mbt10,cbt6,chl6} to kempld
   - Add support for da9053 to da9052
   - Add support for itco-wdt (v3) and baytrail to lpc_ich
   - Add new drivers for tps65218, rtsx_usb, bcm590xx

  (Re-)moved drivers:
   - twl4030 ==> drivers/iio
   - ti-ssp  ==> /dev/null"

* tag 'mfd-for-linus-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (103 commits)
  mfd: wm5110: Correct default for HEADPHONE_DETECT_1
  mfd: arizona: Correct small errors in the DT binding documentation
  mfd: arizona: Mark DSP clocking register as volatile
  mfd: devicetree: bindings: Add pm8xxx RTC description
  mfd: kempld-core: Fix potential hang-up during boot
  mfd: sec-core: Fix uninitialized 'regmap_rtc' on S2MPA01
  mfd: tps65910: Fix regmap_irq_chip_data leak on mfd_add_devices fail
  mfd: tps65910: Fix possible invalid pointer dereference on regmap_add_irq_chip fail
  mfd: sec-core: Fix I2C dummy device resource leak on probe failure
  mfd: sec-core: Add of_compatible strings for clock MFD cells
  mfd: Remove obsolete ti-ssp driver
  Documentation: mfd: s2mps11: Describe S5M8767 and S2MPS14 clocks
  mfd: bcm590xx: Fix type argument for module device table
  mfd: lpc_ich: Add support for Intel Bay Trail SoC
  mfd: lpc_ich: Add support for NM10 GPIO
  mfd: lpc_ich: Change Avoton to iTCO v3
  watchdog: iTCO_wdt: Add support for v3 silicon
  mfd: lpc_ich: Add support for iTCO v3
  mfd: lpc_ich: Remove lpc_ich_cfg struct use
  mfd: lpc_ich: Only configure watchdog or GPIO when present
  ...
This commit is contained in:
Linus Torvalds 2014-04-07 10:24:18 -07:00
commit e5744abb2f
92 changed files with 3960 additions and 1590 deletions

View File

@ -0,0 +1,24 @@
* TWL4030 Monitoring Analog to Digital Converter (MADC)
The MADC subsystem in the TWL4030 consists of a 10-bit ADC
combined with a 16-input analog multiplexer.
Required properties:
- compatible: Should contain "ti,twl4030-madc".
- interrupts: IRQ line for the MADC submodule.
- #io-channel-cells: Should be set to <1>.
Optional properties:
- ti,system-uses-second-madc-irq: boolean, set if the second madc irq register
should be used, which is intended to be used
by Co-Processors (e.g. a modem).
Example:
&twl {
madc {
compatible = "ti,twl4030-madc";
interrupts = <3>;
#io-channel-cells = <1>;
};
};

View File

@ -5,9 +5,10 @@ of analogue I/O.
Required properties:
- compatible : one of the following chip-specific strings:
"wlf,wm5102"
"wlf,wm5110"
- compatible : One of the following chip-specific strings:
"wlf,wm5102"
"wlf,wm5110"
"wlf,wm8997"
- reg : I2C slave address when connected using I2C, chip select number when
using SPI.
@ -25,8 +26,9 @@ Required properties:
- #gpio-cells : Must be 2. The first cell is the pin number and the
second cell is used to specify optional parameters (currently unused).
- AVDD1-supply, DBVDD1-supply, DBVDD2-supply, DBVDD3-supply, CPVDD-supply,
SPKVDDL-supply, SPKVDDR-supply : power supplies for the device, as covered
- AVDD-supply, DBVDD1-supply, DBVDD2-supply, DBVDD3-supply (wm5102, wm5110),
CPVDD-supply, SPKVDDL-supply (wm5102, wm5110), SPKVDDR-supply (wm5102,
wm5110), SPKVDD-supply (wm8997) : Power supplies for the device, as covered
in Documentation/devicetree/bindings/regulator/regulator.txt
Optional properties:
@ -46,6 +48,7 @@ codec: wm5102@1a {
compatible = "wlf,wm5102";
reg = <0x1a>;
interrupts = <347>;
interrupt-controller;
#interrupt-cells = <2>;
interrupt-parent = <&gic>;
@ -53,10 +56,10 @@ codec: wm5102@1a {
#gpio-cells = <2>;
wlf,gpio-defaults = <
0x00000000, /* AIF1TXLRCLK */
0xffffffff,
0xffffffff,
0xffffffff,
0xffffffff,
0x00000000 /* AIF1TXLRCLK */
0xffffffff
0xffffffff
0xffffffff
0xffffffff
>;
};

View File

@ -0,0 +1,37 @@
-------------------------------
BCM590xx Power Management Units
-------------------------------
Required properties:
- compatible: "brcm,bcm59056"
- reg: I2C slave address
- interrupts: interrupt for the PMU. Generic interrupt client node bindings
are described in interrupt-controller/interrupts.txt
------------------
Voltage Regulators
------------------
Optional child nodes:
- regulators: container node for regulators following the generic
regulator binding in regulator/regulator.txt
The valid regulator node names for BCM59056 are:
rfldo, camldo1, camldo2, simldo1, simldo2, sdldo, sdxldo,
mmcldo1, mmcldo2, audldo, micldo, usbldo, vibldo,
csr, iosr1, iosr2, msr, sdsr1, sdsr2, vsr
Example:
pmu: bcm59056@8 {
compatible = "brcm,bcm59056";
reg = <0x08>;
interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
regulators {
rfldo_reg: rfldo {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3300000>;
};
...
};
};

View File

@ -0,0 +1,72 @@
* Dialog DA9055 Power Management Integrated Circuit (PMIC)
DA9055 consists of a large and varied group of sub-devices (I2C Only):
Device Supply Names Description
------ ------------ -----------
da9055-gpio : : GPIOs
da9055-regulator : : Regulators
da9055-onkey : : On key
da9055-rtc : : RTC
da9055-hwmon : : ADC
da9055-watchdog : : Watchdog
The CODEC device in DA9055 has a separate, configurable I2C address and so
is instantiated separately from the PMIC.
For details on accompanying CODEC I2C device, see the following:
Documentation/devicetree/bindings/sound/da9055.txt
======
Required properties:
- compatible : Should be "dlg,da9055-pmic"
- reg: Specifies the I2C slave address (defaults to 0x5a but can be modified)
- interrupt-parent: Specifies the phandle of the interrupt controller to which
the IRQs from da9055 are delivered to.
- interrupts: IRQ line info for da9055 chip.
- interrupt-controller: da9055 has internal IRQs (has own IRQ domain).
- #interrupt-cells: Should be 1, is the local IRQ number for da9055.
Sub-nodes:
- regulators : Contain the regulator nodes. The DA9055 regulators are
bound using their names as listed below:
buck1 : regulator BUCK1
buck2 : regulator BUCK2
ldo1 : regulator LDO1
ldo2 : regulator LDO2
ldo3 : regulator LDO3
ldo4 : regulator LDO4
ldo5 : regulator LDO5
ldo6 : regulator LDO6
The bindings details of individual regulator device can be found in:
Documentation/devicetree/bindings/regulator/regulator.txt
Example:
pmic: da9055-pmic@5a {
compatible = "dlg,da9055-pmic";
reg = <0x5a>;
interrupt-parent = <&intc>;
interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <1>;
regulators {
buck1: BUCK1 {
regulator-min-microvolt = <725000>;
regulator-max-microvolt = <2075000>;
};
buck2: BUCK2 {
regulator-min-microvolt = <925000>;
regulator-max-microvolt = <2500000>;
};
ldo1: LDO1 {
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <3300000>;
};
};
};

View File

@ -32,6 +32,29 @@ Optional properties:
- single-ulpi-bypass: Must be present if the controller contains a single
ULPI bypass control bit. e.g. OMAP3 silicon <= ES2.1
- clocks: a list of phandles and clock-specifier pairs, one for each entry in
clock-names.
- clock-names: should include:
For OMAP3
* "usbhost_120m_fck" - 120MHz Functional clock.
For OMAP4+
* "refclk_60m_int" - 60MHz internal reference clock for UTMI clock mux
* "refclk_60m_ext_p1" - 60MHz external ref. clock for Port 1's UTMI clock mux.
* "refclk_60m_ext_p2" - 60MHz external ref. clock for Port 2's UTMI clock mux
* "utmi_p1_gfclk" - Port 1 UTMI clock mux.
* "utmi_p2_gfclk" - Port 2 UTMI clock mux.
* "usb_host_hs_utmi_p1_clk" - Port 1 UTMI clock gate.
* "usb_host_hs_utmi_p2_clk" - Port 2 UTMI clock gate.
* "usb_host_hs_utmi_p3_clk" - Port 3 UTMI clock gate.
* "usb_host_hs_hsic480m_p1_clk" - Port 1 480MHz HSIC clock gate.
* "usb_host_hs_hsic480m_p2_clk" - Port 2 480MHz HSIC clock gate.
* "usb_host_hs_hsic480m_p3_clk" - Port 3 480MHz HSIC clock gate.
* "usb_host_hs_hsic60m_p1_clk" - Port 1 60MHz HSIC clock gate.
* "usb_host_hs_hsic60m_p2_clk" - Port 2 60MHz HSIC clock gate.
* "usb_host_hs_hsic60m_p3_clk" - Port 3 60MHz HSIC clock gate.
Required properties if child node exists:
- #address-cells: Must be 1

View File

@ -7,6 +7,16 @@ Required properties:
- interrupts : should contain the TLL module's interrupt
- ti,hwmod : must contain "usb_tll_hs"
Optional properties:
- clocks: a list of phandles and clock-specifier pairs, one for each entry in
clock-names.
- clock-names: should include:
* "usb_tll_hs_usb_ch0_clk" - USB TLL channel 0 clock
* "usb_tll_hs_usb_ch1_clk" - USB TLL channel 1 clock
* "usb_tll_hs_usb_ch2_clk" - USB TLL channel 2 clock
Example:
usbhstll: usbhstll@4a062000 {

View File

@ -0,0 +1,96 @@
Qualcomm PM8xxx PMIC multi-function devices
The PM8xxx family of Power Management ICs are used to provide regulated
voltages and other various functionality to Qualcomm SoCs.
= PROPERTIES
- compatible:
Usage: required
Value type: <string>
Definition: must be one of:
"qcom,pm8058"
"qcom,pm8921"
- #address-cells:
Usage: required
Value type: <u32>
Definition: must be 1
- #size-cells:
Usage: required
Value type: <u32>
Definition: must be 0
- interrupts:
Usage: required
Value type: <prop-encoded-array>
Definition: specifies the interrupt that indicates a subdevice
has generated an interrupt (summary interrupt). The
format of the specifier is defined by the binding document
describing the node's interrupt parent.
- #interrupt-cells:
Usage: required
Value type : <u32>
Definition: must be 2. Specifies the number of cells needed to encode
an interrupt source. The 1st cell contains the interrupt
number. The 2nd cell is the trigger type and level flags
encoded as follows:
1 = low-to-high edge triggered
2 = high-to-low edge triggered
4 = active high level-sensitive
8 = active low level-sensitive
- interrupt-controller:
Usage: required
Value type: <empty>
Definition: identifies this node as an interrupt controller
= SUBCOMPONENTS
The PMIC contains multiple independent functions, each described in a subnode.
The below bindings specify the set of valid subnodes.
== Real-Time Clock
- compatible:
Usage: required
Value type: <string>
Definition: must be one of:
"qcom,pm8058-rtc"
"qcom,pm8921-rtc"
- reg:
Usage: required
Value type: <prop-encoded-array>
Definition: single entry specifying the base address of the RTC registers
- interrupts:
Usage: required
Value type: <prop-encoded-array>
Definition: single entry specifying the RTC's alarm interrupt
- allow-set-time:
Usage: optional
Value type: <empty>
Definition: indicates that the setting of RTC time is allowed by
the host CPU
= EXAMPLE
pmicintc: pmic@0 {
compatible = "qcom,pm8921";
interrupts = <104 8>;
#interrupt-cells = <2>;
interrupt-controller;
#address-cells = <1>;
#size-cells = <0>;
rtc@11d {
compatible = "qcom,pm8921-rtc";
reg = <0x11d>;
interrupts = <0x27 0>;
};
};

View File

@ -16,20 +16,25 @@ Optional properties:
- interrupts: Interrupt specifiers for interrupt sources.
Optional nodes:
- clocks: s2mps11 provides three(AP/CP/BT) buffered 32.768 KHz outputs, so to
register these as clocks with common clock framework instantiate a sub-node
named "clocks". It uses the common clock binding documented in :
- clocks: s2mps11 and s5m8767 provide three(AP/CP/BT) buffered 32.768 KHz
outputs, so to register these as clocks with common clock framework
instantiate a sub-node named "clocks". It uses the common clock binding
documented in :
[Documentation/devicetree/bindings/clock/clock-bindings.txt]
The s2mps14 provides two (AP/BT) buffered 32.768 KHz outputs.
- #clock-cells: should be 1.
- The following is the list of clocks generated by the controller. Each clock
is assigned an identifier and client nodes use this identifier to specify
the clock which they consume.
Clock ID
----------------------
32KhzAP 0
32KhzCP 1
32KhzBT 2
Clock ID Devices
----------------------------------------------------------
32KhzAP 0 S2MPS11, S2MPS14, S5M8767
32KhzCP 1 S2MPS11, S5M8767
32KhzBT 2 S2MPS11, S2MPS14, S5M8767
- compatible: Should be one of: "samsung,s2mps11-clk", "samsung,s2mps14-clk",
"samsung,s5m8767-clk"
- regulators: The regulators of s2mps11 that have to be instantiated should be
included in a sub-node named 'regulators'. Regulator nodes included in this
@ -75,7 +80,8 @@ Example:
compatible = "samsung,s2mps11-pmic";
reg = <0x66>;
s2m_osc: clocks{
s2m_osc: clocks {
compatible = "samsung,s2mps11-clk";
#clock-cells = 1;
clock-output-names = "xx", "yy", "zz";
};

View File

@ -733,6 +733,12 @@
#address-cells = <1>;
#size-cells = <1>;
ranges;
clocks = <&init_60m_fclk>,
<&xclk60mhsp1_ck>,
<&xclk60mhsp2_ck>;
clock-names = "refclk_60m_int",
"refclk_60m_ext_p1",
"refclk_60m_ext_p2";
usbhsohci: ohci@4a064800 {
compatible = "ti,ohci-omap3";

View File

@ -814,6 +814,12 @@
#address-cells = <1>;
#size-cells = <1>;
ranges;
clocks = <&l3init_60m_fclk>,
<&xclk60mhsp1_ck>,
<&xclk60mhsp2_ck>;
clock-names = "refclk_60m_int",
"refclk_60m_ext_p1",
"refclk_60m_ext_p2";
usbhsohci: ohci@4a064800 {
compatible = "ti,ohci-omap3";

View File

@ -3497,10 +3497,6 @@ static struct omap_clk omap3xxx_clks[] = {
CLK(NULL, "dss_tv_fck", &dss_tv_fck),
CLK(NULL, "dss_96m_fck", &dss_96m_fck),
CLK(NULL, "dss2_alwon_fck", &dss2_alwon_fck),
CLK(NULL, "utmi_p1_gfclk", &dummy_ck),
CLK(NULL, "utmi_p2_gfclk", &dummy_ck),
CLK(NULL, "xclk60mhsp1_ck", &dummy_ck),
CLK(NULL, "xclk60mhsp2_ck", &dummy_ck),
CLK(NULL, "init_60m_fclk", &dummy_ck),
CLK(NULL, "gpt1_fck", &gpt1_fck),
CLK(NULL, "aes2_ick", &aes2_ick),

View File

@ -1955,10 +1955,6 @@ static struct omap_hwmod_class omap3xxx_usb_host_hs_hwmod_class = {
.sysc = &omap3xxx_usb_host_hs_sysc,
};
static struct omap_hwmod_opt_clk omap3xxx_usb_host_hs_opt_clks[] = {
{ .role = "ehci_logic_fck", .clk = "usbhost_120m_fck", },
};
static struct omap_hwmod_irq_info omap3xxx_usb_host_hs_irqs[] = {
{ .name = "ohci-irq", .irq = 76 + OMAP_INTC_START, },
{ .name = "ehci-irq", .irq = 77 + OMAP_INTC_START, },
@ -1981,8 +1977,6 @@ static struct omap_hwmod omap3xxx_usb_host_hs_hwmod = {
.idlest_stdby_bit = OMAP3430ES2_ST_USBHOST_STDBY_SHIFT,
},
},
.opt_clks = omap3xxx_usb_host_hs_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(omap3xxx_usb_host_hs_opt_clks),
/*
* Errata: USBHOST Configured In Smart-Idle Can Lead To a Deadlock

View File

@ -130,10 +130,6 @@ static struct ti_dt_clk omap3xxx_clks[] = {
DT_CLK(NULL, "dss_tv_fck", "dss_tv_fck"),
DT_CLK(NULL, "dss_96m_fck", "dss_96m_fck"),
DT_CLK(NULL, "dss2_alwon_fck", "dss2_alwon_fck"),
DT_CLK(NULL, "utmi_p1_gfclk", "dummy_ck"),
DT_CLK(NULL, "utmi_p2_gfclk", "dummy_ck"),
DT_CLK(NULL, "xclk60mhsp1_ck", "dummy_ck"),
DT_CLK(NULL, "xclk60mhsp2_ck", "dummy_ck"),
DT_CLK(NULL, "init_60m_fclk", "dummy_ck"),
DT_CLK(NULL, "gpt1_fck", "gpt1_fck"),
DT_CLK(NULL, "aes2_ick", "aes2_ick"),

View File

@ -1,5 +1,5 @@
/*
* Intel ICH6-10, Series 5 and 6 GPIO driver
* Intel ICH6-10, Series 5 and 6, Atom C2000 (Avoton/Rangeley) GPIO driver
*
* Copyright (C) 2010 Extreme Engineering Solutions.
*
@ -55,6 +55,16 @@ static const u8 ichx_reglen[3] = {
0x30, 0x10, 0x10,
};
static const u8 avoton_regs[4][3] = {
{0x00, 0x80, 0x00},
{0x04, 0x84, 0x00},
{0x08, 0x88, 0x00},
};
static const u8 avoton_reglen[3] = {
0x10, 0x10, 0x00,
};
#define ICHX_WRITE(val, reg, base_res) outl(val, (reg) + (base_res)->start)
#define ICHX_READ(reg, base_res) inl((reg) + (base_res)->start)
@ -353,6 +363,17 @@ static struct ichx_desc intel5_desc = {
.reglen = ichx_reglen,
};
/* Avoton */
static struct ichx_desc avoton_desc = {
/* Avoton has only 59 GPIOs, but we assume the first set of register
* (Core) has 32 instead of 31 to keep gpio-ich compliance
*/
.ngpio = 60,
.regs = avoton_regs,
.reglen = avoton_reglen,
.use_outlvl_cache = true,
};
static int ichx_gpio_request_regions(struct resource *res_base,
const char *name, u8 use_gpio)
{
@ -427,6 +448,9 @@ static int ichx_gpio_probe(struct platform_device *pdev)
case ICH_V10CONS_GPIO:
ichx_priv.desc = &ich10_cons_desc;
break;
case AVOTON_GPIO:
ichx_priv.desc = &avoton_desc;
break;
default:
return -ENODEV;
}

View File

@ -193,6 +193,16 @@ config TI_AM335X_ADC
Say yes here to build support for Texas Instruments ADC
driver which is also a MFD client.
config TWL4030_MADC
tristate "TWL4030 MADC (Monitoring A/D Converter)"
depends on TWL4030_CORE
help
This driver provides support for Triton TWL4030-MADC. The
driver supports both RT and SW conversion methods.
This driver can also be built as a module. If so, the module will be
called twl4030-madc.
config TWL6030_GPADC
tristate "TWL6030 GPADC (General Purpose A/D Converter) Support"
depends on TWL4030_CORE

View File

@ -21,6 +21,7 @@ obj-$(CONFIG_MEN_Z188_ADC) += men_z188_adc.o
obj-$(CONFIG_NAU7802) += nau7802.o
obj-$(CONFIG_TI_ADC081C) += ti-adc081c.o
obj-$(CONFIG_TI_AM335X_ADC) += ti_am335x_adc.o
obj-$(CONFIG_TWL4030_MADC) += twl4030-madc.o
obj-$(CONFIG_TWL6030_GPADC) += twl6030-gpadc.o
obj-$(CONFIG_VF610_ADC) += vf610_adc.o
obj-$(CONFIG_VIPERBOARD_ADC) += viperboard_adc.o

View File

@ -29,7 +29,6 @@
*
*/
#include <linux/init.h>
#include <linux/device.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
@ -47,20 +46,84 @@
#include <linux/gfp.h>
#include <linux/err.h>
/*
#include <linux/iio/iio.h>
/**
* struct twl4030_madc_data - a container for madc info
* @dev - pointer to device structure for madc
* @lock - mutex protecting this data structure
* @requests - Array of request struct corresponding to SW1, SW2 and RT
* @imr - Interrupt mask register of MADC
* @isr - Interrupt status register of MADC
* @dev: Pointer to device structure for madc
* @lock: Mutex protecting this data structure
* @requests: Array of request struct corresponding to SW1, SW2 and RT
* @use_second_irq: IRQ selection (main or co-processor)
* @imr: Interrupt mask register of MADC
* @isr: Interrupt status register of MADC
*/
struct twl4030_madc_data {
struct device *dev;
struct mutex lock; /* mutex protecting this data structure */
struct twl4030_madc_request requests[TWL4030_MADC_NUM_METHODS];
int imr;
int isr;
bool use_second_irq;
u8 imr;
u8 isr;
};
static int twl4030_madc_read(struct iio_dev *iio_dev,
const struct iio_chan_spec *chan,
int *val, int *val2, long mask)
{
struct twl4030_madc_data *madc = iio_priv(iio_dev);
struct twl4030_madc_request req;
int ret;
req.method = madc->use_second_irq ? TWL4030_MADC_SW2 : TWL4030_MADC_SW1;
req.channels = BIT(chan->channel);
req.active = false;
req.func_cb = NULL;
req.type = TWL4030_MADC_WAIT;
req.raw = !(mask == IIO_CHAN_INFO_PROCESSED);
req.do_avg = (mask == IIO_CHAN_INFO_AVERAGE_RAW);
ret = twl4030_madc_conversion(&req);
if (ret < 0)
return ret;
*val = req.rbuf[chan->channel];
return IIO_VAL_INT;
}
static const struct iio_info twl4030_madc_iio_info = {
.read_raw = &twl4030_madc_read,
.driver_module = THIS_MODULE,
};
#define TWL4030_ADC_CHANNEL(_channel, _type, _name) { \
.type = _type, \
.channel = _channel, \
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
BIT(IIO_CHAN_INFO_AVERAGE_RAW) | \
BIT(IIO_CHAN_INFO_PROCESSED), \
.datasheet_name = _name, \
.indexed = 1, \
}
static const struct iio_chan_spec twl4030_madc_iio_channels[] = {
TWL4030_ADC_CHANNEL(0, IIO_VOLTAGE, "ADCIN0"),
TWL4030_ADC_CHANNEL(1, IIO_TEMP, "ADCIN1"),
TWL4030_ADC_CHANNEL(2, IIO_VOLTAGE, "ADCIN2"),
TWL4030_ADC_CHANNEL(3, IIO_VOLTAGE, "ADCIN3"),
TWL4030_ADC_CHANNEL(4, IIO_VOLTAGE, "ADCIN4"),
TWL4030_ADC_CHANNEL(5, IIO_VOLTAGE, "ADCIN5"),
TWL4030_ADC_CHANNEL(6, IIO_VOLTAGE, "ADCIN6"),
TWL4030_ADC_CHANNEL(7, IIO_VOLTAGE, "ADCIN7"),
TWL4030_ADC_CHANNEL(8, IIO_VOLTAGE, "ADCIN8"),
TWL4030_ADC_CHANNEL(9, IIO_VOLTAGE, "ADCIN9"),
TWL4030_ADC_CHANNEL(10, IIO_CURRENT, "ADCIN10"),
TWL4030_ADC_CHANNEL(11, IIO_VOLTAGE, "ADCIN11"),
TWL4030_ADC_CHANNEL(12, IIO_VOLTAGE, "ADCIN12"),
TWL4030_ADC_CHANNEL(13, IIO_VOLTAGE, "ADCIN13"),
TWL4030_ADC_CHANNEL(14, IIO_VOLTAGE, "ADCIN14"),
TWL4030_ADC_CHANNEL(15, IIO_VOLTAGE, "ADCIN15"),
};
static struct twl4030_madc_data *twl4030_madc;
@ -91,17 +154,16 @@ twl4030_divider_ratios[16] = {
};
/*
* Conversion table from -3 to 55 degree Celcius
*/
static int therm_tbl[] = {
30800, 29500, 28300, 27100,
26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900,
17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100,
11600, 11200, 10800, 10400, 10000, 9630, 9280, 8950, 8620, 8310,
8020, 7730, 7460, 7200, 6950, 6710, 6470, 6250, 6040, 5830,
5640, 5450, 5260, 5090, 4920, 4760, 4600, 4450, 4310, 4170,
4040, 3910, 3790, 3670, 3550
/* Conversion table from -3 to 55 degrees Celcius */
static int twl4030_therm_tbl[] = {
30800, 29500, 28300, 27100,
26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700,
17900, 17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100,
12600, 12100, 11600, 11200, 10800, 10400, 10000, 9630, 9280,
8950, 8620, 8310, 8020, 7730, 7460, 7200, 6950, 6710,
6470, 6250, 6040, 5830, 5640, 5450, 5260, 5090, 4920,
4760, 4600, 4450, 4310, 4170, 4040, 3910, 3790, 3670,
3550
};
/*
@ -133,37 +195,32 @@ const struct twl4030_madc_conversion_method twl4030_conversion_methods[] = {
},
};
/*
* Function to read a particular channel value.
* @madc - pointer to struct twl4030_madc_data
* @reg - lsb of ADC Channel
* If the i2c read fails it returns an error else returns 0.
/**
* twl4030_madc_channel_raw_read() - Function to read a particular channel value
* @madc: pointer to struct twl4030_madc_data
* @reg: lsb of ADC Channel
*
* Return: 0 on success, an error code otherwise.
*/
static int twl4030_madc_channel_raw_read(struct twl4030_madc_data *madc, u8 reg)
{
u8 msb, lsb;
u16 val;
int ret;
/*
* For each ADC channel, we have MSB and LSB register pair. MSB address
* is always LSB address+1. reg parameter is the address of LSB register
*/
ret = twl_i2c_read_u8(TWL4030_MODULE_MADC, &msb, reg + 1);
ret = twl_i2c_read_u16(TWL4030_MODULE_MADC, &val, reg);
if (ret) {
dev_err(madc->dev, "unable to read MSB register 0x%X\n",
reg + 1);
return ret;
}
ret = twl_i2c_read_u8(TWL4030_MODULE_MADC, &lsb, reg);
if (ret) {
dev_err(madc->dev, "unable to read LSB register 0x%X\n", reg);
dev_err(madc->dev, "unable to read register 0x%X\n", reg);
return ret;
}
return (int)(((msb << 8) | lsb) >> 6);
return (int)(val >> 6);
}
/*
* Return battery temperature
* Return battery temperature in degrees Celsius
* Or < 0 on failure.
*/
static int twl4030battery_temperature(int raw_volt)
@ -172,18 +229,18 @@ static int twl4030battery_temperature(int raw_volt)
int temp, curr, volt, res, ret;
volt = (raw_volt * TEMP_STEP_SIZE) / TEMP_PSR_R;
/* Getting and calculating the supply current in micro ampers */
/* Getting and calculating the supply current in micro amperes */
ret = twl_i2c_read_u8(TWL_MODULE_MAIN_CHARGE, &val,
REG_BCICTL2);
if (ret < 0)
return ret;
curr = ((val & TWL4030_BCI_ITHEN) + 1) * 10;
/* Getting and calculating the thermistor resistance in ohms */
res = volt * 1000 / curr;
/* calculating temperature */
for (temp = 58; temp >= 0; temp--) {
int actual = therm_tbl[temp];
int actual = twl4030_therm_tbl[temp];
if ((actual - res) >= 0)
break;
}
@ -205,11 +262,12 @@ static int twl4030battery_current(int raw_volt)
else /* slope of 0.88 mV/mA */
return (raw_volt * CURR_STEP_SIZE) / CURR_PSR_R2;
}
/*
* Function to read channel values
* @madc - pointer to twl4030_madc_data struct
* @reg_base - Base address of the first channel
* @Channels - 16 bit bitmap. If the bit is set, channel value is read
* @Channels - 16 bit bitmap. If the bit is set, channel's value is read
* @buf - The channel values are stored here. if read fails error
* @raw - Return raw values without conversion
* value is stored
@ -220,17 +278,17 @@ static int twl4030_madc_read_channels(struct twl4030_madc_data *madc,
long channels, int *buf,
bool raw)
{
int count = 0, count_req = 0, i;
int count = 0;
int i;
u8 reg;
for_each_set_bit(i, &channels, TWL4030_MADC_MAX_CHANNELS) {
reg = reg_base + 2 * i;
reg = reg_base + (2 * i);
buf[i] = twl4030_madc_channel_raw_read(madc, reg);
if (buf[i] < 0) {
dev_err(madc->dev,
"Unable to read register 0x%X\n", reg);
count_req++;
continue;
dev_err(madc->dev, "Unable to read register 0x%X\n",
reg);
return buf[i];
}
if (raw) {
count++;
@ -241,7 +299,7 @@ static int twl4030_madc_read_channels(struct twl4030_madc_data *madc,
buf[i] = twl4030battery_current(buf[i]);
if (buf[i] < 0) {
dev_err(madc->dev, "err reading current\n");
count_req++;
return buf[i];
} else {
count++;
buf[i] = buf[i] - 750;
@ -251,7 +309,7 @@ static int twl4030_madc_read_channels(struct twl4030_madc_data *madc,
buf[i] = twl4030battery_temperature(buf[i]);
if (buf[i] < 0) {
dev_err(madc->dev, "err reading temperature\n");
count_req++;
return buf[i];
} else {
buf[i] -= 3;
count++;
@ -272,8 +330,6 @@ static int twl4030_madc_read_channels(struct twl4030_madc_data *madc,
twl4030_divider_ratios[i].numerator);
}
}
if (count_req)
dev_err(madc->dev, "%d channel conversion failed\n", count_req);
return count;
}
@ -297,13 +353,13 @@ static int twl4030_madc_enable_irq(struct twl4030_madc_data *madc, u8 id)
madc->imr);
return ret;
}
val &= ~(1 << id);
ret = twl_i2c_write_u8(TWL4030_MODULE_MADC, val, madc->imr);
if (ret) {
dev_err(madc->dev,
"unable to write imr register 0x%X\n", madc->imr);
return ret;
}
return 0;
@ -366,7 +422,7 @@ static irqreturn_t twl4030_madc_threaded_irq_handler(int irq, void *_madc)
continue;
ret = twl4030_madc_disable_irq(madc, i);
if (ret < 0)
dev_dbg(madc->dev, "Disable interrupt failed%d\n", i);
dev_dbg(madc->dev, "Disable interrupt failed %d\n", i);
madc->requests[i].result_pending = 1;
}
for (i = 0; i < TWL4030_MADC_NUM_METHODS; i++) {
@ -448,21 +504,17 @@ static int twl4030_madc_start_conversion(struct twl4030_madc_data *madc,
{
const struct twl4030_madc_conversion_method *method;
int ret = 0;
if (conv_method != TWL4030_MADC_SW1 && conv_method != TWL4030_MADC_SW2)
return -ENOTSUPP;
method = &twl4030_conversion_methods[conv_method];
switch (conv_method) {
case TWL4030_MADC_SW1:
case TWL4030_MADC_SW2:
ret = twl_i2c_write_u8(TWL4030_MODULE_MADC,
TWL4030_MADC_SW_START, method->ctrl);
if (ret) {
dev_err(madc->dev,
"unable to write ctrl register 0x%X\n",
method->ctrl);
return ret;
}
break;
default:
break;
ret = twl_i2c_write_u8(TWL4030_MODULE_MADC, TWL4030_MADC_SW_START,
method->ctrl);
if (ret) {
dev_err(madc->dev, "unable to write ctrl register 0x%X\n",
method->ctrl);
return ret;
}
return 0;
@ -513,7 +565,6 @@ static int twl4030_madc_wait_conversion_ready(struct twl4030_madc_data *madc,
int twl4030_madc_conversion(struct twl4030_madc_request *req)
{
const struct twl4030_madc_conversion_method *method;
u8 ch_msb, ch_lsb;
int ret;
if (!req || !twl4030_madc)
@ -529,38 +580,22 @@ int twl4030_madc_conversion(struct twl4030_madc_request *req)
ret = -EBUSY;
goto out;
}
ch_msb = (req->channels >> 8) & 0xff;
ch_lsb = req->channels & 0xff;
method = &twl4030_conversion_methods[req->method];
/* Select channels to be converted */
ret = twl_i2c_write_u8(TWL4030_MODULE_MADC, ch_msb, method->sel + 1);
ret = twl_i2c_write_u16(TWL4030_MODULE_MADC, req->channels, method->sel);
if (ret) {
dev_err(twl4030_madc->dev,
"unable to write sel register 0x%X\n", method->sel + 1);
goto out;
}
ret = twl_i2c_write_u8(TWL4030_MODULE_MADC, ch_lsb, method->sel);
if (ret) {
dev_err(twl4030_madc->dev,
"unable to write sel register 0x%X\n", method->sel + 1);
"unable to write sel register 0x%X\n", method->sel);
goto out;
}
/* Select averaging for all channels if do_avg is set */
if (req->do_avg) {
ret = twl_i2c_write_u8(TWL4030_MODULE_MADC,
ch_msb, method->avg + 1);
ret = twl_i2c_write_u16(TWL4030_MODULE_MADC, req->channels,
method->avg);
if (ret) {
dev_err(twl4030_madc->dev,
"unable to write avg register 0x%X\n",
method->avg + 1);
goto out;
}
ret = twl_i2c_write_u8(TWL4030_MODULE_MADC,
ch_lsb, method->avg);
if (ret) {
dev_err(twl4030_madc->dev,
"unable to write sel reg 0x%X\n",
method->sel + 1);
method->avg);
goto out;
}
}
@ -601,10 +636,6 @@ out:
}
EXPORT_SYMBOL_GPL(twl4030_madc_conversion);
/*
* Return channel value
* Or < 0 on failure.
*/
int twl4030_get_madc_conversion(int channel_no)
{
struct twl4030_madc_request req;
@ -625,20 +656,25 @@ int twl4030_get_madc_conversion(int channel_no)
}
EXPORT_SYMBOL_GPL(twl4030_get_madc_conversion);
/*
/**
* twl4030_madc_set_current_generator() - setup bias current
*
* @madc: pointer to twl4030_madc_data struct
* @chan: can be one of the two values:
* TWL4030_BCI_ITHEN
* Enables bias current for main battery type reading
* TWL4030_BCI_TYPEN
* Enables bias current for main battery temperature sensing
* @on: enable or disable chan.
*
* Function to enable or disable bias current for
* main battery type reading or temperature sensing
* @madc - pointer to twl4030_madc_data struct
* @chan - can be one of the two values
* TWL4030_BCI_ITHEN - Enables bias current for main battery type reading
* TWL4030_BCI_TYPEN - Enables bias current for main battery temperature
* sensing
* @on - enable or disable chan.
*/
static int twl4030_madc_set_current_generator(struct twl4030_madc_data *madc,
int chan, int on)
{
int ret;
int regmask;
u8 regval;
ret = twl_i2c_read_u8(TWL_MODULE_MAIN_CHARGE,
@ -648,10 +684,13 @@ static int twl4030_madc_set_current_generator(struct twl4030_madc_data *madc,
TWL4030_BCI_BCICTL1);
return ret;
}
regmask = chan ? TWL4030_BCI_ITHEN : TWL4030_BCI_TYPEN;
if (on)
regval |= chan ? TWL4030_BCI_ITHEN : TWL4030_BCI_TYPEN;
regval |= regmask;
else
regval &= chan ? ~TWL4030_BCI_ITHEN : ~TWL4030_BCI_TYPEN;
regval &= ~regmask;
ret = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE,
regval, TWL4030_BCI_BCICTL1);
if (ret) {
@ -666,7 +705,7 @@ static int twl4030_madc_set_current_generator(struct twl4030_madc_data *madc,
/*
* Function that sets MADC software power on bit to enable MADC
* @madc - pointer to twl4030_madc_data struct
* @on - Enable or disable MADC software powen on bit.
* @on - Enable or disable MADC software power on bit.
* returns error if i2c read/write fails else 0
*/
static int twl4030_madc_set_power(struct twl4030_madc_data *madc, int on)
@ -702,31 +741,52 @@ static int twl4030_madc_probe(struct platform_device *pdev)
{
struct twl4030_madc_data *madc;
struct twl4030_madc_platform_data *pdata = dev_get_platdata(&pdev->dev);
int ret;
struct device_node *np = pdev->dev.of_node;
int irq, ret;
u8 regval;
struct iio_dev *iio_dev = NULL;
if (!pdata) {
dev_err(&pdev->dev, "platform_data not available\n");
if (!pdata && !np) {
dev_err(&pdev->dev, "neither platform data nor Device Tree node available\n");
return -EINVAL;
}
madc = kzalloc(sizeof(*madc), GFP_KERNEL);
if (!madc)
return -ENOMEM;
iio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*madc));
if (!iio_dev) {
dev_err(&pdev->dev, "failed allocating iio device\n");
return -ENOMEM;
}
madc = iio_priv(iio_dev);
madc->dev = &pdev->dev;
iio_dev->name = dev_name(&pdev->dev);
iio_dev->dev.parent = &pdev->dev;
iio_dev->dev.of_node = pdev->dev.of_node;
iio_dev->info = &twl4030_madc_iio_info;
iio_dev->modes = INDIO_DIRECT_MODE;
iio_dev->channels = twl4030_madc_iio_channels;
iio_dev->num_channels = ARRAY_SIZE(twl4030_madc_iio_channels);
/*
* Phoenix provides 2 interrupt lines. The first one is connected to
* the OMAP. The other one can be connected to the other processor such
* as modem. Hence two separate ISR and IMR registers.
*/
madc->imr = (pdata->irq_line == 1) ?
TWL4030_MADC_IMR1 : TWL4030_MADC_IMR2;
madc->isr = (pdata->irq_line == 1) ?
TWL4030_MADC_ISR1 : TWL4030_MADC_ISR2;
if (pdata)
madc->use_second_irq = (pdata->irq_line != 1);
else
madc->use_second_irq = of_property_read_bool(np,
"ti,system-uses-second-madc-irq");
madc->imr = madc->use_second_irq ? TWL4030_MADC_IMR2 :
TWL4030_MADC_IMR1;
madc->isr = madc->use_second_irq ? TWL4030_MADC_ISR2 :
TWL4030_MADC_ISR1;
ret = twl4030_madc_set_power(madc, 1);
if (ret < 0)
goto err_power;
return ret;
ret = twl4030_madc_set_current_generator(madc, 0, 1);
if (ret < 0)
goto err_current_generator;
@ -768,46 +828,63 @@ static int twl4030_madc_probe(struct platform_device *pdev)
}
}
platform_set_drvdata(pdev, madc);
platform_set_drvdata(pdev, iio_dev);
mutex_init(&madc->lock);
ret = request_threaded_irq(platform_get_irq(pdev, 0), NULL,
irq = platform_get_irq(pdev, 0);
ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
twl4030_madc_threaded_irq_handler,
IRQF_TRIGGER_RISING, "twl4030_madc", madc);
if (ret) {
dev_dbg(&pdev->dev, "could not request irq\n");
dev_err(&pdev->dev, "could not request irq\n");
goto err_i2c;
}
twl4030_madc = madc;
ret = iio_device_register(iio_dev);
if (ret) {
dev_err(&pdev->dev, "could not register iio device\n");
goto err_i2c;
}
return 0;
err_i2c:
twl4030_madc_set_current_generator(madc, 0, 0);
err_current_generator:
twl4030_madc_set_power(madc, 0);
err_power:
kfree(madc);
return ret;
}
static int twl4030_madc_remove(struct platform_device *pdev)
{
struct twl4030_madc_data *madc = platform_get_drvdata(pdev);
struct iio_dev *iio_dev = platform_get_drvdata(pdev);
struct twl4030_madc_data *madc = iio_priv(iio_dev);
iio_device_unregister(iio_dev);
free_irq(platform_get_irq(pdev, 0), madc);
twl4030_madc_set_current_generator(madc, 0, 0);
twl4030_madc_set_power(madc, 0);
kfree(madc);
return 0;
}
#ifdef CONFIG_OF
static const struct of_device_id twl_madc_of_match[] = {
{ .compatible = "ti,twl4030-madc", },
{ },
};
MODULE_DEVICE_TABLE(of, twl_madc_of_match);
#endif
static struct platform_driver twl4030_madc_driver = {
.probe = twl4030_madc_probe,
.remove = twl4030_madc_remove,
.driver = {
.name = "twl4030_madc",
.owner = THIS_MODULE,
},
.of_match_table = of_match_ptr(twl_madc_of_match),
},
};
module_platform_driver(twl4030_madc_driver);

View File

@ -571,7 +571,7 @@ static int pm800_probe(struct i2c_client *client,
ret = pm800_pages_init(chip);
if (ret) {
dev_err(&client->dev, "pm800_pages_init failed!\n");
goto err_page_init;
goto err_device_init;
}
ret = device_800_init(chip, pdata);
@ -587,7 +587,6 @@ static int pm800_probe(struct i2c_client *client,
err_device_init:
pm800_pages_exit(chip);
err_page_init:
err_subchip_alloc:
pm80x_deinit();
out_init:

View File

@ -1179,12 +1179,18 @@ static int pm860x_probe(struct i2c_client *client,
chip->companion_addr = pdata->companion_addr;
chip->companion = i2c_new_dummy(chip->client->adapter,
chip->companion_addr);
if (!chip->companion) {
dev_err(&client->dev,
"Failed to allocate I2C companion device\n");
return -ENODEV;
}
chip->regmap_companion = regmap_init_i2c(chip->companion,
&pm860x_regmap_config);
if (IS_ERR(chip->regmap_companion)) {
ret = PTR_ERR(chip->regmap_companion);
dev_err(&chip->companion->dev,
"Failed to allocate register map: %d\n", ret);
i2c_unregister_device(chip->companion);
return ret;
}
i2c_set_clientdata(chip->companion, chip);

View File

@ -59,6 +59,14 @@ config MFD_AAT2870_CORE
additional drivers must be enabled in order to use the
functionality of the device.
config MFD_BCM590XX
tristate "Broadcom BCM590xx PMUs"
select MFD_CORE
select REGMAP_I2C
depends on I2C
help
Support for the BCM590xx PMUs from Broadcom
config MFD_CROS_EC
tristate "ChromeOS Embedded Controller"
select MFD_CORE
@ -100,7 +108,7 @@ config PMIC_DA903X
bool "Dialog Semiconductor DA9030/DA9034 PMIC Support"
depends on I2C=y
help
Say yes here to support for Dialog Semiconductor DA9030 (a.k.a
Say yes here to add support for Dialog Semiconductor DA9030 (a.k.a
ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC
usually found on PXA processors-based platforms. This includes
the I2C driver and the core APIs _only_, you have to select
@ -270,13 +278,18 @@ config MFD_KEMPLD
device may provide functions like watchdog, GPIO, UART and I2C bus.
The following modules are supported:
* COMe-bHL6
* COMe-bIP#
* COMe-bPC2 (ETXexpress-PC)
* COMe-bSC# (ETXexpress-SC T#)
* COMe-cBT6
* COMe-cCT6
* COMe-cDC2 (microETXexpress-DC)
* COMe-cHL6
* COMe-cPC2 (microETXexpress-PC)
* COMe-mBT10
* COMe-mCT10
* COMe-mTT10 (nanoETXexpress-TT)
* ETX-OH
This driver can also be built as a module. If so, the module
@ -322,9 +335,10 @@ config MFD_MAX14577
depends on I2C=y
select MFD_CORE
select REGMAP_I2C
select REGMAP_IRQ
select IRQ_DOMAIN
help
Say yes here to support for Maxim Semiconductor MAX14577.
Say yes here to add support for Maxim Semiconductor MAX14577.
This is a Micro-USB IC with Charger controls on chip.
This driver provides common support for accessing the device;
additional drivers must be enabled in order to use the functionality
@ -337,7 +351,7 @@ config MFD_MAX77686
select REGMAP_I2C
select IRQ_DOMAIN
help
Say yes here to support for Maxim Semiconductor MAX77686.
Say yes here to add support for Maxim Semiconductor MAX77686.
This is a Power Management IC with RTC on chip.
This driver provides common support for accessing the device;
additional drivers must be enabled in order to use the functionality
@ -349,7 +363,7 @@ config MFD_MAX77693
select MFD_CORE
select REGMAP_I2C
help
Say yes here to support for Maxim Semiconductor MAX77693.
Say yes here to add support for Maxim Semiconductor MAX77693.
This is a companion Power Management IC with Flash, Haptic, Charger,
and MUIC(Micro USB Interface Controller) controls on chip.
This driver provides common support for accessing the device;
@ -363,7 +377,7 @@ config MFD_MAX8907
select REGMAP_I2C
select REGMAP_IRQ
help
Say yes here to support for Maxim Semiconductor MAX8907. This is
Say yes here to add support for Maxim Semiconductor MAX8907. This is
a Power Management IC. This driver provides common support for
accessing the device; additional drivers must be enabled in order
to use the functionality of the device.
@ -373,7 +387,7 @@ config MFD_MAX8925
depends on I2C=y
select MFD_CORE
help
Say yes here to support for Maxim Semiconductor MAX8925. This is
Say yes here to add support for Maxim Semiconductor MAX8925. This is
a Power Management IC. This driver provides common support for
accessing the device, additional drivers must be enabled in order
to use the functionality of the device.
@ -384,7 +398,7 @@ config MFD_MAX8997
select MFD_CORE
select IRQ_DOMAIN
help
Say yes here to support for Maxim Semiconductor MAX8997/8966.
Say yes here to add support for Maxim Semiconductor MAX8997/8966.
This is a Power Management IC with RTC, Flash, Fuel Gauge, Haptic,
MUIC controls on chip.
This driver provides common support for accessing the device;
@ -397,7 +411,7 @@ config MFD_MAX8998
select MFD_CORE
select IRQ_DOMAIN
help
Say yes here to support for Maxim Semiconductor MAX8998 and
Say yes here to add support for Maxim Semiconductor MAX8998 and
National Semiconductor LP3974. This is a Power Management IC.
This driver provides common support for accessing the device,
additional drivers must be enabled in order to use the functionality
@ -473,10 +487,11 @@ config MFD_PM8XXX
config MFD_PM8921_CORE
tristate "Qualcomm PM8921 PMIC chip"
depends on (ARCH_MSM || HEXAGON)
depends on BROKEN
depends on (ARM || HEXAGON)
select IRQ_DOMAIN
select MFD_CORE
select MFD_PM8XXX
select REGMAP
help
If you say yes to this option, support will be included for the
built-in PM8921 PMIC chip.
@ -487,16 +502,6 @@ config MFD_PM8921_CORE
Say M here if you want to include support for PM8921 chip as a module.
This will build a module called "pm8921-core".
config MFD_PM8XXX_IRQ
bool "Qualcomm PM8xxx IRQ features"
depends on MFD_PM8XXX
default y if MFD_PM8XXX
help
This is the IRQ driver for Qualcomm PM 8xxx PMIC chips.
This is required to use certain other PM 8xxx features, such as GPIO
and MPP.
config MFD_RDC321X
tristate "RDC R-321x southbridge"
select MFD_CORE
@ -516,6 +521,16 @@ config MFD_RTSX_PCI
types of memory cards, such as Memory Stick, Memory Stick Pro,
Secure Digital and MultiMediaCard.
config MFD_RTSX_USB
tristate "Realtek USB card reader"
depends on USB
select MFD_CORE
help
Select this option to get support for Realtek USB 2.0 card readers
including RTS5129, RTS5139, RTS5179 and RTS5170.
Realtek card reader supports access to many types of memory cards,
such as Memory Stick Pro, Secure Digital and MultiMediaCard.
config MFD_RC5T583
bool "Ricoh RC5T583 Power Management system device"
depends on I2C=y
@ -774,17 +789,6 @@ config MFD_PALMAS
If you say yes here you get support for the Palmas
series of PMIC chips from Texas Instruments.
config MFD_TI_SSP
tristate "TI Sequencer Serial Port support"
depends on ARCH_DAVINCI_TNETV107X
select MFD_CORE
---help---
Say Y here if you want support for the Sequencer Serial Port
in a Texas Instruments TNETV107X SoC.
To compile this driver as a module, choose M here: the
module will be called ti-ssp.
config TPS6105X
tristate "TI TPS61050/61052 Boost Converters"
depends on I2C
@ -853,6 +857,22 @@ config MFD_TPS65217
This driver can also be built as a module. If so, the module
will be called tps65217.
config MFD_TPS65218
tristate "TI TPS65218 Power Management chips"
depends on I2C
select MFD_CORE
select REGMAP_I2C
select REGMAP_IRQ
help
If you say yes here you get support for the TPS65218 series of
Power Management chips.
These include voltage regulators, gpio and other features
that are often used in portable devices. Only regulator
component is currently supported.
This driver can also be built as a module. If so, the module
will be called tps65218.
config MFD_TPS6586X
bool "TI TPS6586x Power Management chips"
depends on I2C=y
@ -935,16 +955,6 @@ config TWL4030_CORE
high speed USB OTG transceiver, an audio codec (on most
versions) and many other features.
config TWL4030_MADC
tristate "TI TWL4030 MADC"
depends on TWL4030_CORE
help
This driver provides support for triton TWL4030-MADC. The
driver supports both RT and SW conversion methods.
This driver can be built as a module. If so it will be
named twl4030-madc
config TWL4030_POWER
bool "TI TWL4030 power resources"
depends on TWL4030_CORE && ARM
@ -1193,9 +1203,6 @@ config MFD_STW481X
in various ST Microelectronics and ST-Ericsson embedded
Nomadik series.
endmenu
endif
menu "Multimedia Capabilities Port drivers"
depends on ARCH_SA1100
@ -1226,3 +1233,6 @@ config VEXPRESS_CONFIG
help
Platform configuration infrastructure for the ARM Ltd.
Versatile Express.
endmenu
endif

View File

@ -8,12 +8,14 @@ obj-$(CONFIG_MFD_88PM800) += 88pm800.o 88pm80x.o
obj-$(CONFIG_MFD_88PM805) += 88pm805.o 88pm80x.o
obj-$(CONFIG_MFD_SM501) += sm501.o
obj-$(CONFIG_MFD_ASIC3) += asic3.o tmio_core.o
obj-$(CONFIG_MFD_BCM590XX) += bcm590xx.o
obj-$(CONFIG_MFD_CROS_EC) += cros_ec.o
obj-$(CONFIG_MFD_CROS_EC_I2C) += cros_ec_i2c.o
obj-$(CONFIG_MFD_CROS_EC_SPI) += cros_ec_spi.o
rtsx_pci-objs := rtsx_pcr.o rts5209.o rts5229.o rtl8411.o rts5227.o rts5249.o
obj-$(CONFIG_MFD_RTSX_PCI) += rtsx_pci.o
obj-$(CONFIG_MFD_RTSX_USB) += rtsx_usb.o
obj-$(CONFIG_HTC_EGPIO) += htc-egpio.o
obj-$(CONFIG_HTC_PASIC3) += htc-pasic3.o
@ -21,7 +23,6 @@ obj-$(CONFIG_HTC_I2CPLD) += htc-i2cpld.o
obj-$(CONFIG_MFD_DAVINCI_VOICECODEC) += davinci_voicecodec.o
obj-$(CONFIG_MFD_DM355EVM_MSP) += dm355evm_msp.o
obj-$(CONFIG_MFD_TI_SSP) += ti-ssp.o
obj-$(CONFIG_MFD_TI_AM335X_TSCADC) += ti_am335x_tscadc.o
obj-$(CONFIG_MFD_STA2X11) += sta2x11-mfd.o
@ -62,6 +63,7 @@ obj-$(CONFIG_TPS6105X) += tps6105x.o
obj-$(CONFIG_TPS65010) += tps65010.o
obj-$(CONFIG_TPS6507X) += tps6507x.o
obj-$(CONFIG_MFD_TPS65217) += tps65217.o
obj-$(CONFIG_MFD_TPS65218) += tps65218.o
obj-$(CONFIG_MFD_TPS65910) += tps65910.o
tps65912-objs := tps65912-core.o tps65912-irq.o
obj-$(CONFIG_MFD_TPS65912) += tps65912.o
@ -71,7 +73,6 @@ obj-$(CONFIG_MFD_TPS80031) += tps80031.o
obj-$(CONFIG_MENELAUS) += menelaus.o
obj-$(CONFIG_TWL4030_CORE) += twl-core.o twl4030-irq.o twl6030-irq.o
obj-$(CONFIG_TWL4030_MADC) += twl4030-madc.o
obj-$(CONFIG_TWL4030_POWER) += twl4030-power.o
obj-$(CONFIG_MFD_TWL4030_AUDIO) += twl4030-audio.o
obj-$(CONFIG_TWL6040_CORE) += twl6040.o
@ -150,7 +151,6 @@ obj-$(CONFIG_MFD_SI476X_CORE) += si476x-core.o
obj-$(CONFIG_MFD_CS5535) += cs5535-mfd.o
obj-$(CONFIG_MFD_OMAP_USB_HOST) += omap-usb-host.o omap-usb-tll.o
obj-$(CONFIG_MFD_PM8921_CORE) += pm8921-core.o ssbi.o
obj-$(CONFIG_MFD_PM8XXX_IRQ) += pm8xxx-irq.o
obj-$(CONFIG_TPS65911_COMPARATOR) += tps65911-comparator.o
obj-$(CONFIG_MFD_TPS65090) += tps65090.o
obj-$(CONFIG_MFD_AAT2870_CORE) += aat2870-core.o

View File

@ -20,7 +20,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/irq.h>

View File

@ -277,6 +277,7 @@ static const struct regmap_range as3722_readable_ranges[] = {
regmap_reg_range(AS3722_ADC0_CONTROL_REG, AS3722_ADC_CONFIGURATION_REG),
regmap_reg_range(AS3722_ASIC_ID1_REG, AS3722_ASIC_ID2_REG),
regmap_reg_range(AS3722_LOCK_REG, AS3722_LOCK_REG),
regmap_reg_range(AS3722_FUSE7_REG, AS3722_FUSE7_REG),
};
static const struct regmap_access_table as3722_readable_table = {

93
drivers/mfd/bcm590xx.c Normal file
View File

@ -0,0 +1,93 @@
/*
* Broadcom BCM590xx PMU
*
* Copyright 2014 Linaro Limited
* Author: Matt Porter <mporter@linaro.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/err.h>
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/mfd/bcm590xx.h>
#include <linux/mfd/core.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/regmap.h>
#include <linux/slab.h>
static const struct mfd_cell bcm590xx_devs[] = {
{
.name = "bcm590xx-vregs",
},
};
static const struct regmap_config bcm590xx_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.max_register = BCM590XX_MAX_REGISTER,
.cache_type = REGCACHE_RBTREE,
};
static int bcm590xx_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct bcm590xx *bcm590xx;
int ret;
bcm590xx = devm_kzalloc(&i2c->dev, sizeof(*bcm590xx), GFP_KERNEL);
if (!bcm590xx)
return -ENOMEM;
i2c_set_clientdata(i2c, bcm590xx);
bcm590xx->dev = &i2c->dev;
bcm590xx->i2c_client = i2c;
bcm590xx->regmap = devm_regmap_init_i2c(i2c, &bcm590xx_regmap_config);
if (IS_ERR(bcm590xx->regmap)) {
ret = PTR_ERR(bcm590xx->regmap);
dev_err(&i2c->dev, "regmap initialization failed: %d\n", ret);
return ret;
}
ret = mfd_add_devices(&i2c->dev, -1, bcm590xx_devs,
ARRAY_SIZE(bcm590xx_devs), NULL, 0, NULL);
if (ret < 0)
dev_err(&i2c->dev, "failed to add sub-devices: %d\n", ret);
return ret;
}
static const struct of_device_id bcm590xx_of_match[] = {
{ .compatible = "brcm,bcm59056" },
{ }
};
MODULE_DEVICE_TABLE(of, bcm590xx_of_match);
static const struct i2c_device_id bcm590xx_i2c_id[] = {
{ "bcm59056" },
{ }
};
MODULE_DEVICE_TABLE(i2c, bcm590xx_i2c_id);
static struct i2c_driver bcm590xx_i2c_driver = {
.driver = {
.name = "bcm590xx",
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(bcm590xx_of_match),
},
.probe = bcm590xx_i2c_probe,
.id_table = bcm590xx_i2c_id,
};
module_i2c_driver(bcm590xx_i2c_driver);
MODULE_AUTHOR("Matt Porter <mporter@linaro.org>");
MODULE_DESCRIPTION("BCM590xx multi-function driver");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:bcm590xx");

View File

@ -23,7 +23,6 @@
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mfd/core.h>
#include <linux/module.h>
#include <linux/pci.h>

View File

@ -279,6 +279,9 @@ static bool da9052_reg_volatile(struct device *dev, unsigned int reg)
case DA9052_EVENT_B_REG:
case DA9052_EVENT_C_REG:
case DA9052_EVENT_D_REG:
case DA9052_CONTROL_B_REG:
case DA9052_CONTROL_D_REG:
case DA9052_SUPPLY_REG:
case DA9052_FAULTLOG_REG:
case DA9052_CHG_TIME_REG:
case DA9052_ADC_RES_L_REG:

View File

@ -75,6 +75,7 @@ static int da9052_i2c_fix(struct da9052 *da9052, unsigned char reg)
DA9052_PARK_REGISTER,
&val);
break;
case DA9053_BC:
default:
/*
* For other chips parking of I2C register
@ -114,6 +115,7 @@ static const struct i2c_device_id da9052_i2c_id[] = {
{"da9053-aa", DA9053_AA},
{"da9053-ba", DA9053_BA},
{"da9053-bb", DA9053_BB},
{"da9053-bc", DA9053_BC},
{}
};
@ -121,8 +123,9 @@ static const struct i2c_device_id da9052_i2c_id[] = {
static const struct of_device_id dialog_dt_ids[] = {
{ .compatible = "dlg,da9052", .data = &da9052_i2c_id[0] },
{ .compatible = "dlg,da9053-aa", .data = &da9052_i2c_id[1] },
{ .compatible = "dlg,da9053-ab", .data = &da9052_i2c_id[2] },
{ .compatible = "dlg,da9053-ba", .data = &da9052_i2c_id[2] },
{ .compatible = "dlg,da9053-bb", .data = &da9052_i2c_id[3] },
{ .compatible = "dlg,da9053-bc", .data = &da9052_i2c_id[4] },
{ /* sentinel */ }
};
#endif

View File

@ -71,6 +71,7 @@ static struct spi_device_id da9052_spi_id[] = {
{"da9053-aa", DA9053_AA},
{"da9053-ba", DA9053_BA},
{"da9053-bb", DA9053_BB},
{"da9053-bc", DA9053_BC},
{}
};

View File

@ -15,6 +15,8 @@
#include <linux/device.h>
#include <linux/i2c.h>
#include <linux/err.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/mfd/da9055/core.h>
@ -66,6 +68,11 @@ static struct i2c_device_id da9055_i2c_id[] = {
};
MODULE_DEVICE_TABLE(i2c, da9055_i2c_id);
static const struct of_device_id da9055_of_match[] = {
{ .compatible = "dlg,da9055-pmic", },
{ }
};
static struct i2c_driver da9055_i2c_driver = {
.probe = da9055_i2c_probe,
.remove = da9055_i2c_remove,
@ -73,6 +80,7 @@ static struct i2c_driver da9055_i2c_driver = {
.driver = {
.name = "da9055-pmic",
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(da9055_of_match),
},
};

View File

@ -110,7 +110,7 @@ static const struct mfd_cell da9063_devs[] = {
int da9063_device_init(struct da9063 *da9063, unsigned int irq)
{
struct da9063_pdata *pdata = da9063->dev->platform_data;
int model, revision;
int model, variant_id, variant_code;
int ret;
if (pdata) {
@ -141,23 +141,26 @@ int da9063_device_init(struct da9063 *da9063, unsigned int irq)
return -ENODEV;
}
ret = regmap_read(da9063->regmap, DA9063_REG_CHIP_VARIANT, &revision);
ret = regmap_read(da9063->regmap, DA9063_REG_CHIP_VARIANT, &variant_id);
if (ret < 0) {
dev_err(da9063->dev, "Cannot read chip revision id.\n");
dev_err(da9063->dev, "Cannot read chip variant id.\n");
return -EIO;
}
revision >>= DA9063_CHIP_VARIANT_SHIFT;
if (revision != 3) {
dev_err(da9063->dev, "Unknown chip revision: %d\n", revision);
variant_code = variant_id >> DA9063_CHIP_VARIANT_SHIFT;
dev_info(da9063->dev,
"Device detected (chip-ID: 0x%02X, var-ID: 0x%02X)\n",
model, variant_id);
if (variant_code != PMIC_DA9063_BB) {
dev_err(da9063->dev, "Unknown chip variant code: 0x%02X\n",
variant_code);
return -ENODEV;
}
da9063->model = model;
da9063->revision = revision;
dev_info(da9063->dev,
"Device detected (model-ID: 0x%02X rev-ID: 0x%02X)\n",
model, revision);
da9063->variant_code = variant_code;
ret = da9063_irq_init(da9063);
if (ret) {

View File

@ -13,7 +13,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/interrupt.h>
#include <linux/delay.h>

View File

@ -322,9 +322,12 @@ static int kempld_detect_device(struct kempld_device_data *pld)
return -ENODEV;
}
/* Release hardware mutex if aquired */
if (!(index_reg & KEMPLD_MUTEX_KEY))
/* Release hardware mutex if acquired */
if (!(index_reg & KEMPLD_MUTEX_KEY)) {
iowrite8(KEMPLD_MUTEX_KEY, pld->io_index);
/* PXT and COMe-cPC2 boards may require a second release */
iowrite8(KEMPLD_MUTEX_KEY, pld->io_index);
}
mutex_unlock(&pld->lock);
@ -437,6 +440,14 @@ static struct dmi_system_id __initdata kempld_dmi_table[] = {
},
.driver_data = (void *)&kempld_platform_data_generic,
.callback = kempld_create_platform_device,
}, {
.ident = "CHL6",
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
DMI_MATCH(DMI_BOARD_NAME, "COMe-cHL6"),
},
.driver_data = (void *)&kempld_platform_data_generic,
.callback = kempld_create_platform_device,
}, {
.ident = "CHR2",
.matches = {
@ -509,6 +520,14 @@ static struct dmi_system_id __initdata kempld_dmi_table[] = {
},
.driver_data = (void *)&kempld_platform_data_generic,
.callback = kempld_create_platform_device,
}, {
.ident = "CVV6",
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
DMI_MATCH(DMI_BOARD_NAME, "COMe-cBT"),
},
.driver_data = (void *)&kempld_platform_data_generic,
.callback = kempld_create_platform_device,
}, {
.ident = "FRI2",
.matches = {
@ -532,6 +551,14 @@ static struct dmi_system_id __initdata kempld_dmi_table[] = {
},
.driver_data = (void *)&kempld_platform_data_generic,
.callback = kempld_create_platform_device,
}, {
.ident = "MVV1",
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
DMI_MATCH(DMI_BOARD_NAME, "COMe-mBT"),
},
.driver_data = (void *)&kempld_platform_data_generic,
.callback = kempld_create_platform_device,
}, {
.ident = "NTC1",
.matches = {

View File

@ -58,7 +58,6 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/errno.h>
@ -72,9 +71,11 @@
#define ACPIBASE_GPE_END 0x2f
#define ACPIBASE_SMI_OFF 0x30
#define ACPIBASE_SMI_END 0x33
#define ACPIBASE_PMC_OFF 0x08
#define ACPIBASE_PMC_END 0x0c
#define ACPIBASE_TCO_OFF 0x60
#define ACPIBASE_TCO_END 0x7f
#define ACPICTRL 0x44
#define ACPICTRL_PMCBASE 0x44
#define ACPIBASE_GCS_OFF 0x3410
#define ACPIBASE_GCS_END 0x3414
@ -90,16 +91,17 @@
#define wdt_mem_res(i) wdt_res(ICH_RES_MEM_OFF, i)
#define wdt_res(b, i) (&wdt_ich_res[(b) + (i)])
struct lpc_ich_cfg {
int base;
int ctrl;
int save;
};
struct lpc_ich_priv {
int chipset;
struct lpc_ich_cfg acpi;
struct lpc_ich_cfg gpio;
int abase; /* ACPI base */
int actrl_pbase; /* ACPI control or PMC base */
int gbase; /* GPIO base */
int gctrl; /* GPIO control */
int abase_save; /* Cached ACPI base value */
int actrl_pbase_save; /* Cached ACPI control or PMC base value */
int gctrl_save; /* Cached GPIO control value */
};
static struct resource wdt_ich_res[] = {
@ -111,7 +113,7 @@ static struct resource wdt_ich_res[] = {
{
.flags = IORESOURCE_IO,
},
/* GCS */
/* GCS or PMC */
{
.flags = IORESOURCE_MEM,
},
@ -211,6 +213,7 @@ enum lpc_chipsets {
LPC_LPT_LP, /* Lynx Point-LP */
LPC_WBG, /* Wellsburg */
LPC_AVN, /* Avoton SoC */
LPC_BAYTRAIL, /* Bay Trail SoC */
LPC_COLETO, /* Coleto Creek */
LPC_WPT_LP, /* Wildcat Point-LP */
};
@ -303,6 +306,7 @@ static struct lpc_ich_info lpc_chipset_info[] = {
[LPC_NM10] = {
.name = "NM10",
.iTCO_version = 2,
.gpio_version = ICH_V7_GPIO,
},
[LPC_ICH8] = {
.name = "ICH8 or ICH8R",
@ -499,7 +503,12 @@ static struct lpc_ich_info lpc_chipset_info[] = {
},
[LPC_AVN] = {
.name = "Avoton SoC",
.iTCO_version = 1,
.iTCO_version = 3,
.gpio_version = AVOTON_GPIO,
},
[LPC_BAYTRAIL] = {
.name = "Bay Trail SoC",
.iTCO_version = 3,
},
[LPC_COLETO] = {
.name = "Coleto Creek",
@ -726,6 +735,7 @@ static const struct pci_device_id lpc_ich_ids[] = {
{ PCI_VDEVICE(INTEL, 0x1f39), LPC_AVN},
{ PCI_VDEVICE(INTEL, 0x1f3a), LPC_AVN},
{ PCI_VDEVICE(INTEL, 0x1f3b), LPC_AVN},
{ PCI_VDEVICE(INTEL, 0x0f1c), LPC_BAYTRAIL},
{ PCI_VDEVICE(INTEL, 0x2390), LPC_COLETO},
{ PCI_VDEVICE(INTEL, 0x9cc1), LPC_WPT_LP},
{ PCI_VDEVICE(INTEL, 0x9cc2), LPC_WPT_LP},
@ -742,14 +752,20 @@ static void lpc_ich_restore_config_space(struct pci_dev *dev)
{
struct lpc_ich_priv *priv = pci_get_drvdata(dev);
if (priv->acpi.save >= 0) {
pci_write_config_byte(dev, priv->acpi.ctrl, priv->acpi.save);
priv->acpi.save = -1;
if (priv->abase_save >= 0) {
pci_write_config_byte(dev, priv->abase, priv->abase_save);
priv->abase_save = -1;
}
if (priv->gpio.save >= 0) {
pci_write_config_byte(dev, priv->gpio.ctrl, priv->gpio.save);
priv->gpio.save = -1;
if (priv->actrl_pbase_save >= 0) {
pci_write_config_byte(dev, priv->actrl_pbase,
priv->actrl_pbase_save);
priv->actrl_pbase_save = -1;
}
if (priv->gctrl_save >= 0) {
pci_write_config_byte(dev, priv->gctrl, priv->gctrl_save);
priv->gctrl_save = -1;
}
}
@ -758,9 +774,26 @@ static void lpc_ich_enable_acpi_space(struct pci_dev *dev)
struct lpc_ich_priv *priv = pci_get_drvdata(dev);
u8 reg_save;
pci_read_config_byte(dev, priv->acpi.ctrl, &reg_save);
pci_write_config_byte(dev, priv->acpi.ctrl, reg_save | 0x10);
priv->acpi.save = reg_save;
switch (lpc_chipset_info[priv->chipset].iTCO_version) {
case 3:
/*
* Some chipsets (eg Avoton) enable the ACPI space in the
* ACPI BASE register.
*/
pci_read_config_byte(dev, priv->abase, &reg_save);
pci_write_config_byte(dev, priv->abase, reg_save | 0x2);
priv->abase_save = reg_save;
break;
default:
/*
* Most chipsets enable the ACPI space in the ACPI control
* register.
*/
pci_read_config_byte(dev, priv->actrl_pbase, &reg_save);
pci_write_config_byte(dev, priv->actrl_pbase, reg_save | 0x80);
priv->actrl_pbase_save = reg_save;
break;
}
}
static void lpc_ich_enable_gpio_space(struct pci_dev *dev)
@ -768,9 +801,20 @@ static void lpc_ich_enable_gpio_space(struct pci_dev *dev)
struct lpc_ich_priv *priv = pci_get_drvdata(dev);
u8 reg_save;
pci_read_config_byte(dev, priv->gpio.ctrl, &reg_save);
pci_write_config_byte(dev, priv->gpio.ctrl, reg_save | 0x10);
priv->gpio.save = reg_save;
pci_read_config_byte(dev, priv->gctrl, &reg_save);
pci_write_config_byte(dev, priv->gctrl, reg_save | 0x10);
priv->gctrl_save = reg_save;
}
static void lpc_ich_enable_pmc_space(struct pci_dev *dev)
{
struct lpc_ich_priv *priv = pci_get_drvdata(dev);
u8 reg_save;
pci_read_config_byte(dev, priv->actrl_pbase, &reg_save);
pci_write_config_byte(dev, priv->actrl_pbase, reg_save | 0x2);
priv->actrl_pbase_save = reg_save;
}
static void lpc_ich_finalize_cell(struct pci_dev *dev, struct mfd_cell *cell)
@ -815,7 +859,7 @@ static int lpc_ich_init_gpio(struct pci_dev *dev)
struct resource *res;
/* Setup power management base register */
pci_read_config_dword(dev, priv->acpi.base, &base_addr_cfg);
pci_read_config_dword(dev, priv->abase, &base_addr_cfg);
base_addr = base_addr_cfg & 0x0000ff80;
if (!base_addr) {
dev_notice(&dev->dev, "I/O space for ACPI uninitialized\n");
@ -841,7 +885,7 @@ static int lpc_ich_init_gpio(struct pci_dev *dev)
gpe0_done:
/* Setup GPIO base register */
pci_read_config_dword(dev, priv->gpio.base, &base_addr_cfg);
pci_read_config_dword(dev, priv->gbase, &base_addr_cfg);
base_addr = base_addr_cfg & 0x0000ff80;
if (!base_addr) {
dev_notice(&dev->dev, "I/O space for GPIO uninitialized\n");
@ -891,7 +935,7 @@ static int lpc_ich_init_wdt(struct pci_dev *dev)
struct resource *res;
/* Setup power management base register */
pci_read_config_dword(dev, priv->acpi.base, &base_addr_cfg);
pci_read_config_dword(dev, priv->abase, &base_addr_cfg);
base_addr = base_addr_cfg & 0x0000ff80;
if (!base_addr) {
dev_notice(&dev->dev, "I/O space for ACPI uninitialized\n");
@ -910,14 +954,20 @@ static int lpc_ich_init_wdt(struct pci_dev *dev)
lpc_ich_enable_acpi_space(dev);
/*
* iTCO v2:
* Get the Memory-Mapped GCS register. To get access to it
* we have to read RCBA from PCI Config space 0xf0 and use
* it as base. GCS = RCBA + ICH6_GCS(0x3410).
*
* iTCO v3:
* Get the Power Management Configuration register. To get access
* to it we have to read the PMC BASE from config space and address
* the register at offset 0x8.
*/
if (lpc_chipset_info[priv->chipset].iTCO_version == 1) {
/* Don't register iomem for TCO ver 1 */
lpc_ich_cells[LPC_WDT].num_resources--;
} else {
} else if (lpc_chipset_info[priv->chipset].iTCO_version == 2) {
pci_read_config_dword(dev, RCBABASE, &base_addr_cfg);
base_addr = base_addr_cfg & 0xffffc000;
if (!(base_addr_cfg & 1)) {
@ -926,9 +976,17 @@ static int lpc_ich_init_wdt(struct pci_dev *dev)
ret = -ENODEV;
goto wdt_done;
}
res = wdt_mem_res(ICH_RES_MEM_GCS);
res = wdt_mem_res(ICH_RES_MEM_GCS_PMC);
res->start = base_addr + ACPIBASE_GCS_OFF;
res->end = base_addr + ACPIBASE_GCS_END;
} else if (lpc_chipset_info[priv->chipset].iTCO_version == 3) {
lpc_ich_enable_pmc_space(dev);
pci_read_config_dword(dev, ACPICTRL_PMCBASE, &base_addr_cfg);
base_addr = base_addr_cfg & 0xfffffe00;
res = wdt_mem_res(ICH_RES_MEM_GCS_PMC);
res->start = base_addr + ACPIBASE_PMC_OFF;
res->end = base_addr + ACPIBASE_PMC_END;
}
lpc_ich_finalize_cell(dev, &lpc_ich_cells[LPC_WDT]);
@ -952,28 +1010,35 @@ static int lpc_ich_probe(struct pci_dev *dev,
return -ENOMEM;
priv->chipset = id->driver_data;
priv->acpi.save = -1;
priv->acpi.base = ACPIBASE;
priv->acpi.ctrl = ACPICTRL;
priv->gpio.save = -1;
priv->actrl_pbase_save = -1;
priv->abase_save = -1;
priv->abase = ACPIBASE;
priv->actrl_pbase = ACPICTRL_PMCBASE;
priv->gctrl_save = -1;
if (priv->chipset <= LPC_ICH5) {
priv->gpio.base = GPIOBASE_ICH0;
priv->gpio.ctrl = GPIOCTRL_ICH0;
priv->gbase = GPIOBASE_ICH0;
priv->gctrl = GPIOCTRL_ICH0;
} else {
priv->gpio.base = GPIOBASE_ICH6;
priv->gpio.ctrl = GPIOCTRL_ICH6;
priv->gbase = GPIOBASE_ICH6;
priv->gctrl = GPIOCTRL_ICH6;
}
pci_set_drvdata(dev, priv);
ret = lpc_ich_init_wdt(dev);
if (!ret)
cell_added = true;
if (lpc_chipset_info[priv->chipset].iTCO_version) {
ret = lpc_ich_init_wdt(dev);
if (!ret)
cell_added = true;
}
ret = lpc_ich_init_gpio(dev);
if (!ret)
cell_added = true;
if (lpc_chipset_info[priv->chipset].gpio_version) {
ret = lpc_ich_init_gpio(dev);
if (!ret)
cell_added = true;
}
/*
* We only care if at least one or none of the cells registered

View File

@ -23,7 +23,6 @@
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/errno.h>

View File

@ -18,6 +18,7 @@
* This driver is based on max8997.c
*/
#include <linux/err.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/mfd/core.h>
@ -25,7 +26,10 @@
#include <linux/mfd/max14577-private.h>
static struct mfd_cell max14577_devs[] = {
{ .name = "max14577-muic", },
{
.name = "max14577-muic",
.of_compatible = "maxim,max14577-muic",
},
{
.name = "max14577-regulator",
.of_compatible = "maxim,max14577-regulator",

View File

@ -121,6 +121,10 @@ static int max77686_i2c_probe(struct i2c_client *i2c,
dev_info(max77686->dev, "device found\n");
max77686->rtc = i2c_new_dummy(i2c->adapter, I2C_ADDR_RTC);
if (!max77686->rtc) {
dev_err(max77686->dev, "Failed to allocate I2C device for RTC\n");
return -ENODEV;
}
i2c_set_clientdata(max77686->rtc, max77686);
max77686_irq_init(max77686);

View File

@ -148,9 +148,18 @@ static int max77693_i2c_probe(struct i2c_client *i2c,
dev_info(max77693->dev, "device ID: 0x%x\n", reg_data);
max77693->muic = i2c_new_dummy(i2c->adapter, I2C_ADDR_MUIC);
if (!max77693->muic) {
dev_err(max77693->dev, "Failed to allocate I2C device for MUIC\n");
return -ENODEV;
}
i2c_set_clientdata(max77693->muic, max77693);
max77693->haptic = i2c_new_dummy(i2c->adapter, I2C_ADDR_HAPTIC);
if (!max77693->haptic) {
dev_err(max77693->dev, "Failed to allocate I2C device for Haptic\n");
ret = -ENODEV;
goto err_i2c_haptic;
}
i2c_set_clientdata(max77693->haptic, max77693);
/*
@ -184,8 +193,9 @@ err_mfd:
max77693_irq_exit(max77693);
err_irq:
err_regmap_muic:
i2c_unregister_device(max77693->muic);
i2c_unregister_device(max77693->haptic);
err_i2c_haptic:
i2c_unregister_device(max77693->muic);
return ret;
}

View File

@ -181,9 +181,18 @@ static int max8925_probe(struct i2c_client *client,
mutex_init(&chip->io_lock);
chip->rtc = i2c_new_dummy(chip->i2c->adapter, RTC_I2C_ADDR);
if (!chip->rtc) {
dev_err(chip->dev, "Failed to allocate I2C device for RTC\n");
return -ENODEV;
}
i2c_set_clientdata(chip->rtc, chip);
chip->adc = i2c_new_dummy(chip->i2c->adapter, ADC_I2C_ADDR);
if (!chip->adc) {
dev_err(chip->dev, "Failed to allocate I2C device for ADC\n");
i2c_unregister_device(chip->rtc);
return -ENODEV;
}
i2c_set_clientdata(chip->adc, chip);
device_init_wakeup(&client->dev, 1);

View File

@ -208,10 +208,26 @@ static int max8997_i2c_probe(struct i2c_client *i2c,
mutex_init(&max8997->iolock);
max8997->rtc = i2c_new_dummy(i2c->adapter, I2C_ADDR_RTC);
if (!max8997->rtc) {
dev_err(max8997->dev, "Failed to allocate I2C device for RTC\n");
return -ENODEV;
}
i2c_set_clientdata(max8997->rtc, max8997);
max8997->haptic = i2c_new_dummy(i2c->adapter, I2C_ADDR_HAPTIC);
if (!max8997->haptic) {
dev_err(max8997->dev, "Failed to allocate I2C device for Haptic\n");
ret = -ENODEV;
goto err_i2c_haptic;
}
i2c_set_clientdata(max8997->haptic, max8997);
max8997->muic = i2c_new_dummy(i2c->adapter, I2C_ADDR_MUIC);
if (!max8997->muic) {
dev_err(max8997->dev, "Failed to allocate I2C device for MUIC\n");
ret = -ENODEV;
goto err_i2c_muic;
}
i2c_set_clientdata(max8997->muic, max8997);
pm_runtime_set_active(max8997->dev);
@ -239,7 +255,9 @@ static int max8997_i2c_probe(struct i2c_client *i2c,
err_mfd:
mfd_remove_devices(max8997->dev);
i2c_unregister_device(max8997->muic);
err_i2c_muic:
i2c_unregister_device(max8997->haptic);
err_i2c_haptic:
i2c_unregister_device(max8997->rtc);
return ret;
}

View File

@ -215,6 +215,10 @@ static int max8998_i2c_probe(struct i2c_client *i2c,
mutex_init(&max8998->iolock);
max8998->rtc = i2c_new_dummy(i2c->adapter, RTC_I2C_ADDR);
if (!max8998->rtc) {
dev_err(&i2c->dev, "Failed to allocate I2C device for RTC\n");
return -ENODEV;
}
i2c_set_clientdata(max8998->rtc, max8998);
max8998_irq_init(max8998);

View File

@ -140,6 +140,11 @@ static int mc13xxx_spi_probe(struct spi_device *spi)
mc13xxx->irq = spi->irq;
spi->max_speed_hz = spi->max_speed_hz ? : 26000000;
ret = spi_setup(spi);
if (ret)
return ret;
mc13xxx->regmap = devm_regmap_init(&spi->dev, &regmap_mc13xxx_bus,
&spi->dev,
&mc13xxx_regmap_spi_config);

View File

@ -12,7 +12,6 @@
* MCP read/write timeouts from Jordi Colomer, rehacked by rmk.
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/errno.h>
#include <linux/kernel.h>

View File

@ -665,55 +665,78 @@ static int usbhs_omap_probe(struct platform_device *pdev)
goto err_mem;
}
need_logic_fck = false;
/* Set all clocks as invalid to begin with */
omap->ehci_logic_fck = ERR_PTR(-ENODEV);
omap->init_60m_fclk = ERR_PTR(-ENODEV);
omap->utmi_p1_gfclk = ERR_PTR(-ENODEV);
omap->utmi_p2_gfclk = ERR_PTR(-ENODEV);
omap->xclk60mhsp1_ck = ERR_PTR(-ENODEV);
omap->xclk60mhsp2_ck = ERR_PTR(-ENODEV);
for (i = 0; i < omap->nports; i++) {
if (is_ehci_phy_mode(i) || is_ehci_tll_mode(i) ||
is_ehci_hsic_mode(i))
omap->utmi_clk[i] = ERR_PTR(-ENODEV);
omap->hsic480m_clk[i] = ERR_PTR(-ENODEV);
omap->hsic60m_clk[i] = ERR_PTR(-ENODEV);
}
/* for OMAP3 i.e. USBHS REV1 */
if (omap->usbhs_rev == OMAP_USBHS_REV1) {
need_logic_fck = false;
for (i = 0; i < omap->nports; i++) {
if (is_ehci_phy_mode(pdata->port_mode[i]) ||
is_ehci_tll_mode(pdata->port_mode[i]) ||
is_ehci_hsic_mode(pdata->port_mode[i]))
need_logic_fck |= true;
}
omap->ehci_logic_fck = ERR_PTR(-EINVAL);
if (need_logic_fck) {
omap->ehci_logic_fck = clk_get(dev, "ehci_logic_fck");
if (IS_ERR(omap->ehci_logic_fck)) {
ret = PTR_ERR(omap->ehci_logic_fck);
dev_dbg(dev, "ehci_logic_fck failed:%d\n", ret);
}
if (need_logic_fck) {
omap->ehci_logic_fck = devm_clk_get(dev,
"usbhost_120m_fck");
if (IS_ERR(omap->ehci_logic_fck)) {
ret = PTR_ERR(omap->ehci_logic_fck);
dev_err(dev, "usbhost_120m_fck failed:%d\n",
ret);
goto err_mem;
}
}
goto initialize;
}
omap->utmi_p1_gfclk = clk_get(dev, "utmi_p1_gfclk");
/* for OMAP4+ i.e. USBHS REV2+ */
omap->utmi_p1_gfclk = devm_clk_get(dev, "utmi_p1_gfclk");
if (IS_ERR(omap->utmi_p1_gfclk)) {
ret = PTR_ERR(omap->utmi_p1_gfclk);
dev_err(dev, "utmi_p1_gfclk failed error:%d\n", ret);
goto err_p1_gfclk;
goto err_mem;
}
omap->utmi_p2_gfclk = clk_get(dev, "utmi_p2_gfclk");
omap->utmi_p2_gfclk = devm_clk_get(dev, "utmi_p2_gfclk");
if (IS_ERR(omap->utmi_p2_gfclk)) {
ret = PTR_ERR(omap->utmi_p2_gfclk);
dev_err(dev, "utmi_p2_gfclk failed error:%d\n", ret);
goto err_p2_gfclk;
goto err_mem;
}
omap->xclk60mhsp1_ck = clk_get(dev, "xclk60mhsp1_ck");
omap->xclk60mhsp1_ck = devm_clk_get(dev, "refclk_60m_ext_p1");
if (IS_ERR(omap->xclk60mhsp1_ck)) {
ret = PTR_ERR(omap->xclk60mhsp1_ck);
dev_err(dev, "xclk60mhsp1_ck failed error:%d\n", ret);
goto err_xclk60mhsp1;
dev_err(dev, "refclk_60m_ext_p1 failed error:%d\n", ret);
goto err_mem;
}
omap->xclk60mhsp2_ck = clk_get(dev, "xclk60mhsp2_ck");
omap->xclk60mhsp2_ck = devm_clk_get(dev, "refclk_60m_ext_p2");
if (IS_ERR(omap->xclk60mhsp2_ck)) {
ret = PTR_ERR(omap->xclk60mhsp2_ck);
dev_err(dev, "xclk60mhsp2_ck failed error:%d\n", ret);
goto err_xclk60mhsp2;
dev_err(dev, "refclk_60m_ext_p2 failed error:%d\n", ret);
goto err_mem;
}
omap->init_60m_fclk = clk_get(dev, "init_60m_fclk");
omap->init_60m_fclk = devm_clk_get(dev, "refclk_60m_int");
if (IS_ERR(omap->init_60m_fclk)) {
ret = PTR_ERR(omap->init_60m_fclk);
dev_err(dev, "init_60m_fclk failed error:%d\n", ret);
goto err_init60m;
dev_err(dev, "refclk_60m_int failed error:%d\n", ret);
goto err_mem;
}
for (i = 0; i < omap->nports; i++) {
@ -727,55 +750,72 @@ static int usbhs_omap_probe(struct platform_device *pdev)
* platforms have all clocks and we can function without
* them
*/
omap->utmi_clk[i] = clk_get(dev, clkname);
if (IS_ERR(omap->utmi_clk[i]))
dev_dbg(dev, "Failed to get clock : %s : %ld\n",
clkname, PTR_ERR(omap->utmi_clk[i]));
omap->utmi_clk[i] = devm_clk_get(dev, clkname);
if (IS_ERR(omap->utmi_clk[i])) {
ret = PTR_ERR(omap->utmi_clk[i]);
dev_err(dev, "Failed to get clock : %s : %d\n",
clkname, ret);
goto err_mem;
}
snprintf(clkname, sizeof(clkname),
"usb_host_hs_hsic480m_p%d_clk", i + 1);
omap->hsic480m_clk[i] = clk_get(dev, clkname);
if (IS_ERR(omap->hsic480m_clk[i]))
dev_dbg(dev, "Failed to get clock : %s : %ld\n",
clkname, PTR_ERR(omap->hsic480m_clk[i]));
omap->hsic480m_clk[i] = devm_clk_get(dev, clkname);
if (IS_ERR(omap->hsic480m_clk[i])) {
ret = PTR_ERR(omap->hsic480m_clk[i]);
dev_err(dev, "Failed to get clock : %s : %d\n",
clkname, ret);
goto err_mem;
}
snprintf(clkname, sizeof(clkname),
"usb_host_hs_hsic60m_p%d_clk", i + 1);
omap->hsic60m_clk[i] = clk_get(dev, clkname);
if (IS_ERR(omap->hsic60m_clk[i]))
dev_dbg(dev, "Failed to get clock : %s : %ld\n",
clkname, PTR_ERR(omap->hsic60m_clk[i]));
omap->hsic60m_clk[i] = devm_clk_get(dev, clkname);
if (IS_ERR(omap->hsic60m_clk[i])) {
ret = PTR_ERR(omap->hsic60m_clk[i]);
dev_err(dev, "Failed to get clock : %s : %d\n",
clkname, ret);
goto err_mem;
}
}
if (is_ehci_phy_mode(pdata->port_mode[0])) {
/* for OMAP3, clk_set_parent fails */
ret = clk_set_parent(omap->utmi_p1_gfclk,
omap->xclk60mhsp1_ck);
if (ret != 0)
dev_dbg(dev, "xclk60mhsp1_ck set parent failed: %d\n",
ret);
if (ret != 0) {
dev_err(dev, "xclk60mhsp1_ck set parent failed: %d\n",
ret);
goto err_mem;
}
} else if (is_ehci_tll_mode(pdata->port_mode[0])) {
ret = clk_set_parent(omap->utmi_p1_gfclk,
omap->init_60m_fclk);
if (ret != 0)
dev_dbg(dev, "P0 init_60m_fclk set parent failed: %d\n",
ret);
if (ret != 0) {
dev_err(dev, "P0 init_60m_fclk set parent failed: %d\n",
ret);
goto err_mem;
}
}
if (is_ehci_phy_mode(pdata->port_mode[1])) {
ret = clk_set_parent(omap->utmi_p2_gfclk,
omap->xclk60mhsp2_ck);
if (ret != 0)
dev_dbg(dev, "xclk60mhsp2_ck set parent failed: %d\n",
ret);
if (ret != 0) {
dev_err(dev, "xclk60mhsp2_ck set parent failed: %d\n",
ret);
goto err_mem;
}
} else if (is_ehci_tll_mode(pdata->port_mode[1])) {
ret = clk_set_parent(omap->utmi_p2_gfclk,
omap->init_60m_fclk);
if (ret != 0)
dev_dbg(dev, "P1 init_60m_fclk set parent failed: %d\n",
ret);
if (ret != 0) {
dev_err(dev, "P1 init_60m_fclk set parent failed: %d\n",
ret);
goto err_mem;
}
}
initialize:
omap_usbhs_init(dev);
if (dev->of_node) {
@ -784,7 +824,7 @@ static int usbhs_omap_probe(struct platform_device *pdev)
if (ret) {
dev_err(dev, "Failed to create DT children: %d\n", ret);
goto err_alloc;
goto err_mem;
}
} else {
@ -792,40 +832,12 @@ static int usbhs_omap_probe(struct platform_device *pdev)
if (ret) {
dev_err(dev, "omap_usbhs_alloc_children failed: %d\n",
ret);
goto err_alloc;
goto err_mem;
}
}
return 0;
err_alloc:
for (i = 0; i < omap->nports; i++) {
if (!IS_ERR(omap->utmi_clk[i]))
clk_put(omap->utmi_clk[i]);
if (!IS_ERR(omap->hsic60m_clk[i]))
clk_put(omap->hsic60m_clk[i]);
if (!IS_ERR(omap->hsic480m_clk[i]))
clk_put(omap->hsic480m_clk[i]);
}
clk_put(omap->init_60m_fclk);
err_init60m:
clk_put(omap->xclk60mhsp2_ck);
err_xclk60mhsp2:
clk_put(omap->xclk60mhsp1_ck);
err_xclk60mhsp1:
clk_put(omap->utmi_p2_gfclk);
err_p2_gfclk:
clk_put(omap->utmi_p1_gfclk);
err_p1_gfclk:
if (!IS_ERR(omap->ehci_logic_fck))
clk_put(omap->ehci_logic_fck);
err_mem:
pm_runtime_disable(dev);
@ -847,27 +859,6 @@ static int usbhs_omap_remove_child(struct device *dev, void *data)
*/
static int usbhs_omap_remove(struct platform_device *pdev)
{
struct usbhs_hcd_omap *omap = platform_get_drvdata(pdev);
int i;
for (i = 0; i < omap->nports; i++) {
if (!IS_ERR(omap->utmi_clk[i]))
clk_put(omap->utmi_clk[i]);
if (!IS_ERR(omap->hsic60m_clk[i]))
clk_put(omap->hsic60m_clk[i]);
if (!IS_ERR(omap->hsic480m_clk[i]))
clk_put(omap->hsic480m_clk[i]);
}
clk_put(omap->init_60m_fclk);
clk_put(omap->utmi_p1_gfclk);
clk_put(omap->utmi_p2_gfclk);
clk_put(omap->xclk60mhsp2_ck);
clk_put(omap->xclk60mhsp1_ck);
if (!IS_ERR(omap->ehci_logic_fck))
clk_put(omap->ehci_logic_fck);
pm_runtime_disable(&pdev->dev);
/* remove children */

View File

@ -252,7 +252,7 @@ static int usbtll_omap_probe(struct platform_device *pdev)
break;
}
tll->ch_clk = devm_kzalloc(dev, sizeof(struct clk * [tll->nch]),
tll->ch_clk = devm_kzalloc(dev, sizeof(struct clk *) * tll->nch,
GFP_KERNEL);
if (!tll->ch_clk) {
ret = -ENOMEM;

View File

@ -19,7 +19,6 @@
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/completion.h>

View File

@ -14,23 +14,316 @@
#define pr_fmt(fmt) "%s: " fmt, __func__
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/irqchip/chained_irq.h>
#include <linux/irq.h>
#include <linux/irqdomain.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/ssbi.h>
#include <linux/regmap.h>
#include <linux/of_platform.h>
#include <linux/mfd/core.h>
#include <linux/mfd/pm8xxx/pm8921.h>
#include <linux/mfd/pm8xxx/core.h>
#define SSBI_REG_ADDR_IRQ_BASE 0x1BB
#define SSBI_REG_ADDR_IRQ_ROOT (SSBI_REG_ADDR_IRQ_BASE + 0)
#define SSBI_REG_ADDR_IRQ_M_STATUS1 (SSBI_REG_ADDR_IRQ_BASE + 1)
#define SSBI_REG_ADDR_IRQ_M_STATUS2 (SSBI_REG_ADDR_IRQ_BASE + 2)
#define SSBI_REG_ADDR_IRQ_M_STATUS3 (SSBI_REG_ADDR_IRQ_BASE + 3)
#define SSBI_REG_ADDR_IRQ_M_STATUS4 (SSBI_REG_ADDR_IRQ_BASE + 4)
#define SSBI_REG_ADDR_IRQ_BLK_SEL (SSBI_REG_ADDR_IRQ_BASE + 5)
#define SSBI_REG_ADDR_IRQ_IT_STATUS (SSBI_REG_ADDR_IRQ_BASE + 6)
#define SSBI_REG_ADDR_IRQ_CONFIG (SSBI_REG_ADDR_IRQ_BASE + 7)
#define SSBI_REG_ADDR_IRQ_RT_STATUS (SSBI_REG_ADDR_IRQ_BASE + 8)
#define PM_IRQF_LVL_SEL 0x01 /* level select */
#define PM_IRQF_MASK_FE 0x02 /* mask falling edge */
#define PM_IRQF_MASK_RE 0x04 /* mask rising edge */
#define PM_IRQF_CLR 0x08 /* clear interrupt */
#define PM_IRQF_BITS_MASK 0x70
#define PM_IRQF_BITS_SHIFT 4
#define PM_IRQF_WRITE 0x80
#define PM_IRQF_MASK_ALL (PM_IRQF_MASK_FE | \
PM_IRQF_MASK_RE)
#define REG_HWREV 0x002 /* PMIC4 revision */
#define REG_HWREV_2 0x0E8 /* PMIC4 revision 2 */
#define PM8921_NR_IRQS 256
struct pm_irq_chip {
struct device *dev;
struct regmap *regmap;
spinlock_t pm_irq_lock;
struct irq_domain *irqdomain;
unsigned int num_irqs;
unsigned int num_blocks;
unsigned int num_masters;
u8 config[0];
};
struct pm8921 {
struct device *dev;
struct pm_irq_chip *irq_chip;
};
static int pm8xxx_read_block_irq(struct pm_irq_chip *chip, unsigned int bp,
unsigned int *ip)
{
int rc;
spin_lock(&chip->pm_irq_lock);
rc = regmap_write(chip->regmap, SSBI_REG_ADDR_IRQ_BLK_SEL, bp);
if (rc) {
pr_err("Failed Selecting Block %d rc=%d\n", bp, rc);
goto bail;
}
rc = regmap_read(chip->regmap, SSBI_REG_ADDR_IRQ_IT_STATUS, ip);
if (rc)
pr_err("Failed Reading Status rc=%d\n", rc);
bail:
spin_unlock(&chip->pm_irq_lock);
return rc;
}
static int
pm8xxx_config_irq(struct pm_irq_chip *chip, unsigned int bp, unsigned int cp)
{
int rc;
spin_lock(&chip->pm_irq_lock);
rc = regmap_write(chip->regmap, SSBI_REG_ADDR_IRQ_BLK_SEL, bp);
if (rc) {
pr_err("Failed Selecting Block %d rc=%d\n", bp, rc);
goto bail;
}
cp |= PM_IRQF_WRITE;
rc = regmap_write(chip->regmap, SSBI_REG_ADDR_IRQ_CONFIG, cp);
if (rc)
pr_err("Failed Configuring IRQ rc=%d\n", rc);
bail:
spin_unlock(&chip->pm_irq_lock);
return rc;
}
static int pm8xxx_irq_block_handler(struct pm_irq_chip *chip, int block)
{
int pmirq, irq, i, ret = 0;
unsigned int bits;
ret = pm8xxx_read_block_irq(chip, block, &bits);
if (ret) {
pr_err("Failed reading %d block ret=%d", block, ret);
return ret;
}
if (!bits) {
pr_err("block bit set in master but no irqs: %d", block);
return 0;
}
/* Check IRQ bits */
for (i = 0; i < 8; i++) {
if (bits & (1 << i)) {
pmirq = block * 8 + i;
irq = irq_find_mapping(chip->irqdomain, pmirq);
generic_handle_irq(irq);
}
}
return 0;
}
static int pm8xxx_irq_master_handler(struct pm_irq_chip *chip, int master)
{
unsigned int blockbits;
int block_number, i, ret = 0;
ret = regmap_read(chip->regmap, SSBI_REG_ADDR_IRQ_M_STATUS1 + master,
&blockbits);
if (ret) {
pr_err("Failed to read master %d ret=%d\n", master, ret);
return ret;
}
if (!blockbits) {
pr_err("master bit set in root but no blocks: %d", master);
return 0;
}
for (i = 0; i < 8; i++)
if (blockbits & (1 << i)) {
block_number = master * 8 + i; /* block # */
ret |= pm8xxx_irq_block_handler(chip, block_number);
}
return ret;
}
static void pm8xxx_irq_handler(unsigned int irq, struct irq_desc *desc)
{
struct pm_irq_chip *chip = irq_desc_get_handler_data(desc);
struct irq_chip *irq_chip = irq_desc_get_chip(desc);
unsigned int root;
int i, ret, masters = 0;
chained_irq_enter(irq_chip, desc);
ret = regmap_read(chip->regmap, SSBI_REG_ADDR_IRQ_ROOT, &root);
if (ret) {
pr_err("Can't read root status ret=%d\n", ret);
return;
}
/* on pm8xxx series masters start from bit 1 of the root */
masters = root >> 1;
/* Read allowed masters for blocks. */
for (i = 0; i < chip->num_masters; i++)
if (masters & (1 << i))
pm8xxx_irq_master_handler(chip, i);
chained_irq_exit(irq_chip, desc);
}
static void pm8xxx_irq_mask_ack(struct irq_data *d)
{
struct pm_irq_chip *chip = irq_data_get_irq_chip_data(d);
unsigned int pmirq = irqd_to_hwirq(d);
int irq_bit;
u8 block, config;
block = pmirq / 8;
irq_bit = pmirq % 8;
config = chip->config[pmirq] | PM_IRQF_MASK_ALL | PM_IRQF_CLR;
pm8xxx_config_irq(chip, block, config);
}
static void pm8xxx_irq_unmask(struct irq_data *d)
{
struct pm_irq_chip *chip = irq_data_get_irq_chip_data(d);
unsigned int pmirq = irqd_to_hwirq(d);
int irq_bit;
u8 block, config;
block = pmirq / 8;
irq_bit = pmirq % 8;
config = chip->config[pmirq];
pm8xxx_config_irq(chip, block, config);
}
static int pm8xxx_irq_set_type(struct irq_data *d, unsigned int flow_type)
{
struct pm_irq_chip *chip = irq_data_get_irq_chip_data(d);
unsigned int pmirq = irqd_to_hwirq(d);
int irq_bit;
u8 block, config;
block = pmirq / 8;
irq_bit = pmirq % 8;
chip->config[pmirq] = (irq_bit << PM_IRQF_BITS_SHIFT)
| PM_IRQF_MASK_ALL;
if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)) {
if (flow_type & IRQF_TRIGGER_RISING)
chip->config[pmirq] &= ~PM_IRQF_MASK_RE;
if (flow_type & IRQF_TRIGGER_FALLING)
chip->config[pmirq] &= ~PM_IRQF_MASK_FE;
} else {
chip->config[pmirq] |= PM_IRQF_LVL_SEL;
if (flow_type & IRQF_TRIGGER_HIGH)
chip->config[pmirq] &= ~PM_IRQF_MASK_RE;
else
chip->config[pmirq] &= ~PM_IRQF_MASK_FE;
}
config = chip->config[pmirq] | PM_IRQF_CLR;
return pm8xxx_config_irq(chip, block, config);
}
static struct irq_chip pm8xxx_irq_chip = {
.name = "pm8xxx",
.irq_mask_ack = pm8xxx_irq_mask_ack,
.irq_unmask = pm8xxx_irq_unmask,
.irq_set_type = pm8xxx_irq_set_type,
.flags = IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE,
};
/**
* pm8xxx_get_irq_stat - get the status of the irq line
* @chip: pointer to identify a pmic irq controller
* @irq: the irq number
*
* The pm8xxx gpio and mpp rely on the interrupt block to read
* the values on their pins. This function is to facilitate reading
* the status of a gpio or an mpp line. The caller has to convert the
* gpio number to irq number.
*
* RETURNS:
* an int indicating the value read on that line
*/
static int pm8xxx_get_irq_stat(struct pm_irq_chip *chip, int irq)
{
int pmirq, rc;
unsigned int block, bits, bit;
unsigned long flags;
struct irq_data *irq_data = irq_get_irq_data(irq);
pmirq = irq_data->hwirq;
block = pmirq / 8;
bit = pmirq % 8;
spin_lock_irqsave(&chip->pm_irq_lock, flags);
rc = regmap_write(chip->regmap, SSBI_REG_ADDR_IRQ_BLK_SEL, block);
if (rc) {
pr_err("Failed Selecting block irq=%d pmirq=%d blk=%d rc=%d\n",
irq, pmirq, block, rc);
goto bail_out;
}
rc = regmap_read(chip->regmap, SSBI_REG_ADDR_IRQ_RT_STATUS, &bits);
if (rc) {
pr_err("Failed Configuring irq=%d pmirq=%d blk=%d rc=%d\n",
irq, pmirq, block, rc);
goto bail_out;
}
rc = (bits & (1 << bit)) ? 1 : 0;
bail_out:
spin_unlock_irqrestore(&chip->pm_irq_lock, flags);
return rc;
}
static int pm8xxx_irq_domain_map(struct irq_domain *d, unsigned int irq,
irq_hw_number_t hwirq)
{
struct pm_irq_chip *chip = d->host_data;
irq_set_chip_and_handler(irq, &pm8xxx_irq_chip, handle_level_irq);
irq_set_chip_data(irq, chip);
#ifdef CONFIG_ARM
set_irq_flags(irq, IRQF_VALID);
#else
irq_set_noprobe(irq);
#endif
return 0;
}
static const struct irq_domain_ops pm8xxx_irq_domain_ops = {
.xlate = irq_domain_xlate_twocell,
.map = pm8xxx_irq_domain_map,
};
static int pm8921_readb(const struct device *dev, u16 addr, u8 *val)
{
const struct pm8xxx_drvdata *pm8921_drvdata = dev_get_drvdata(dev);
@ -81,42 +374,35 @@ static struct pm8xxx_drvdata pm8921_drvdata = {
.pmic_read_irq_stat = pm8921_read_irq_stat,
};
static int pm8921_add_subdevices(const struct pm8921_platform_data
*pdata,
struct pm8921 *pmic,
u32 rev)
{
int ret = 0, irq_base = 0;
struct pm_irq_chip *irq_chip;
static const struct regmap_config ssbi_regmap_config = {
.reg_bits = 16,
.val_bits = 8,
.max_register = 0x3ff,
.fast_io = true,
.reg_read = ssbi_reg_read,
.reg_write = ssbi_reg_write
};
if (pdata->irq_pdata) {
pdata->irq_pdata->irq_cdata.nirqs = PM8921_NR_IRQS;
pdata->irq_pdata->irq_cdata.rev = rev;
irq_base = pdata->irq_pdata->irq_base;
irq_chip = pm8xxx_irq_init(pmic->dev, pdata->irq_pdata);
if (IS_ERR(irq_chip)) {
pr_err("Failed to init interrupts ret=%ld\n",
PTR_ERR(irq_chip));
return PTR_ERR(irq_chip);
}
pmic->irq_chip = irq_chip;
}
return ret;
}
static const struct of_device_id pm8921_id_table[] = {
{ .compatible = "qcom,pm8058", },
{ .compatible = "qcom,pm8921", },
{ }
};
MODULE_DEVICE_TABLE(of, pm8921_id_table);
static int pm8921_probe(struct platform_device *pdev)
{
const struct pm8921_platform_data *pdata = dev_get_platdata(&pdev->dev);
struct pm8921 *pmic;
int rc;
u8 val;
struct regmap *regmap;
int irq, rc;
unsigned int val;
u32 rev;
struct pm_irq_chip *chip;
unsigned int nirqs = PM8921_NR_IRQS;
if (!pdata) {
pr_err("missing platform data\n");
return -EINVAL;
}
irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
pmic = devm_kzalloc(&pdev->dev, sizeof(struct pm8921), GFP_KERNEL);
if (!pmic) {
@ -124,8 +410,13 @@ static int pm8921_probe(struct platform_device *pdev)
return -ENOMEM;
}
regmap = devm_regmap_init(&pdev->dev, NULL, pdev->dev.parent,
&ssbi_regmap_config);
if (IS_ERR(regmap))
return PTR_ERR(regmap);
/* Read PMIC chip revision */
rc = ssbi_read(pdev->dev.parent, REG_HWREV, &val, sizeof(val));
rc = regmap_read(regmap, REG_HWREV, &val);
if (rc) {
pr_err("Failed to read hw rev reg %d:rc=%d\n", REG_HWREV, rc);
return rc;
@ -134,7 +425,7 @@ static int pm8921_probe(struct platform_device *pdev)
rev = val;
/* Read PMIC chip revision 2 */
rc = ssbi_read(pdev->dev.parent, REG_HWREV_2, &val, sizeof(val));
rc = regmap_read(regmap, REG_HWREV_2, &val);
if (rc) {
pr_err("Failed to read hw rev 2 reg %d:rc=%d\n",
REG_HWREV_2, rc);
@ -147,37 +438,56 @@ static int pm8921_probe(struct platform_device *pdev)
pm8921_drvdata.pm_chip_data = pmic;
platform_set_drvdata(pdev, &pm8921_drvdata);
rc = pm8921_add_subdevices(pdata, pmic, rev);
chip = devm_kzalloc(&pdev->dev, sizeof(*chip) +
sizeof(chip->config[0]) * nirqs,
GFP_KERNEL);
if (!chip)
return -ENOMEM;
pmic->irq_chip = chip;
chip->dev = &pdev->dev;
chip->regmap = regmap;
chip->num_irqs = nirqs;
chip->num_blocks = DIV_ROUND_UP(chip->num_irqs, 8);
chip->num_masters = DIV_ROUND_UP(chip->num_blocks, 8);
spin_lock_init(&chip->pm_irq_lock);
chip->irqdomain = irq_domain_add_linear(pdev->dev.of_node, nirqs,
&pm8xxx_irq_domain_ops,
chip);
if (!chip->irqdomain)
return -ENODEV;
irq_set_handler_data(irq, chip);
irq_set_chained_handler(irq, pm8xxx_irq_handler);
irq_set_irq_wake(irq, 1);
rc = of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev);
if (rc) {
pr_err("Cannot add subdevices rc=%d\n", rc);
goto err;
irq_set_chained_handler(irq, NULL);
irq_set_handler_data(irq, NULL);
irq_domain_remove(chip->irqdomain);
}
/* gpio might not work if no irq device is found */
WARN_ON(pmic->irq_chip == NULL);
return 0;
err:
mfd_remove_devices(pmic->dev);
return rc;
}
static int pm8921_remove_child(struct device *dev, void *unused)
{
platform_device_unregister(to_platform_device(dev));
return 0;
}
static int pm8921_remove(struct platform_device *pdev)
{
struct pm8xxx_drvdata *drvdata;
struct pm8921 *pmic = NULL;
int irq = platform_get_irq(pdev, 0);
struct pm8921 *pmic = pm8921_drvdata.pm_chip_data;
struct pm_irq_chip *chip = pmic->irq_chip;
drvdata = platform_get_drvdata(pdev);
if (drvdata)
pmic = drvdata->pm_chip_data;
if (pmic) {
mfd_remove_devices(pmic->dev);
if (pmic->irq_chip) {
pm8xxx_irq_exit(pmic->irq_chip);
pmic->irq_chip = NULL;
}
}
device_for_each_child(&pdev->dev, NULL, pm8921_remove_child);
irq_set_chained_handler(irq, NULL);
irq_set_handler_data(irq, NULL);
irq_domain_remove(chip->irqdomain);
return 0;
}
@ -188,6 +498,7 @@ static struct platform_driver pm8921_driver = {
.driver = {
.name = "pm8921-core",
.owner = THIS_MODULE,
.of_match_table = pm8921_id_table,
},
};

View File

@ -1,371 +0,0 @@
/*
* Copyright (c) 2011, Code Aurora Forum. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#define pr_fmt(fmt) "%s: " fmt, __func__
#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/kernel.h>
#include <linux/mfd/pm8xxx/core.h>
#include <linux/mfd/pm8xxx/irq.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
/* PMIC8xxx IRQ */
#define SSBI_REG_ADDR_IRQ_BASE 0x1BB
#define SSBI_REG_ADDR_IRQ_ROOT (SSBI_REG_ADDR_IRQ_BASE + 0)
#define SSBI_REG_ADDR_IRQ_M_STATUS1 (SSBI_REG_ADDR_IRQ_BASE + 1)
#define SSBI_REG_ADDR_IRQ_M_STATUS2 (SSBI_REG_ADDR_IRQ_BASE + 2)
#define SSBI_REG_ADDR_IRQ_M_STATUS3 (SSBI_REG_ADDR_IRQ_BASE + 3)
#define SSBI_REG_ADDR_IRQ_M_STATUS4 (SSBI_REG_ADDR_IRQ_BASE + 4)
#define SSBI_REG_ADDR_IRQ_BLK_SEL (SSBI_REG_ADDR_IRQ_BASE + 5)
#define SSBI_REG_ADDR_IRQ_IT_STATUS (SSBI_REG_ADDR_IRQ_BASE + 6)
#define SSBI_REG_ADDR_IRQ_CONFIG (SSBI_REG_ADDR_IRQ_BASE + 7)
#define SSBI_REG_ADDR_IRQ_RT_STATUS (SSBI_REG_ADDR_IRQ_BASE + 8)
#define PM_IRQF_LVL_SEL 0x01 /* level select */
#define PM_IRQF_MASK_FE 0x02 /* mask falling edge */
#define PM_IRQF_MASK_RE 0x04 /* mask rising edge */
#define PM_IRQF_CLR 0x08 /* clear interrupt */
#define PM_IRQF_BITS_MASK 0x70
#define PM_IRQF_BITS_SHIFT 4
#define PM_IRQF_WRITE 0x80
#define PM_IRQF_MASK_ALL (PM_IRQF_MASK_FE | \
PM_IRQF_MASK_RE)
struct pm_irq_chip {
struct device *dev;
spinlock_t pm_irq_lock;
unsigned int devirq;
unsigned int irq_base;
unsigned int num_irqs;
unsigned int num_blocks;
unsigned int num_masters;
u8 config[0];
};
static int pm8xxx_read_root_irq(const struct pm_irq_chip *chip, u8 *rp)
{
return pm8xxx_readb(chip->dev, SSBI_REG_ADDR_IRQ_ROOT, rp);
}
static int pm8xxx_read_master_irq(const struct pm_irq_chip *chip, u8 m, u8 *bp)
{
return pm8xxx_readb(chip->dev,
SSBI_REG_ADDR_IRQ_M_STATUS1 + m, bp);
}
static int pm8xxx_read_block_irq(struct pm_irq_chip *chip, u8 bp, u8 *ip)
{
int rc;
spin_lock(&chip->pm_irq_lock);
rc = pm8xxx_writeb(chip->dev, SSBI_REG_ADDR_IRQ_BLK_SEL, bp);
if (rc) {
pr_err("Failed Selecting Block %d rc=%d\n", bp, rc);
goto bail;
}
rc = pm8xxx_readb(chip->dev, SSBI_REG_ADDR_IRQ_IT_STATUS, ip);
if (rc)
pr_err("Failed Reading Status rc=%d\n", rc);
bail:
spin_unlock(&chip->pm_irq_lock);
return rc;
}
static int pm8xxx_config_irq(struct pm_irq_chip *chip, u8 bp, u8 cp)
{
int rc;
spin_lock(&chip->pm_irq_lock);
rc = pm8xxx_writeb(chip->dev, SSBI_REG_ADDR_IRQ_BLK_SEL, bp);
if (rc) {
pr_err("Failed Selecting Block %d rc=%d\n", bp, rc);
goto bail;
}
cp |= PM_IRQF_WRITE;
rc = pm8xxx_writeb(chip->dev, SSBI_REG_ADDR_IRQ_CONFIG, cp);
if (rc)
pr_err("Failed Configuring IRQ rc=%d\n", rc);
bail:
spin_unlock(&chip->pm_irq_lock);
return rc;
}
static int pm8xxx_irq_block_handler(struct pm_irq_chip *chip, int block)
{
int pmirq, irq, i, ret = 0;
u8 bits;
ret = pm8xxx_read_block_irq(chip, block, &bits);
if (ret) {
pr_err("Failed reading %d block ret=%d", block, ret);
return ret;
}
if (!bits) {
pr_err("block bit set in master but no irqs: %d", block);
return 0;
}
/* Check IRQ bits */
for (i = 0; i < 8; i++) {
if (bits & (1 << i)) {
pmirq = block * 8 + i;
irq = pmirq + chip->irq_base;
generic_handle_irq(irq);
}
}
return 0;
}
static int pm8xxx_irq_master_handler(struct pm_irq_chip *chip, int master)
{
u8 blockbits;
int block_number, i, ret = 0;
ret = pm8xxx_read_master_irq(chip, master, &blockbits);
if (ret) {
pr_err("Failed to read master %d ret=%d\n", master, ret);
return ret;
}
if (!blockbits) {
pr_err("master bit set in root but no blocks: %d", master);
return 0;
}
for (i = 0; i < 8; i++)
if (blockbits & (1 << i)) {
block_number = master * 8 + i; /* block # */
ret |= pm8xxx_irq_block_handler(chip, block_number);
}
return ret;
}
static void pm8xxx_irq_handler(unsigned int irq, struct irq_desc *desc)
{
struct pm_irq_chip *chip = irq_desc_get_handler_data(desc);
struct irq_chip *irq_chip = irq_desc_get_chip(desc);
u8 root;
int i, ret, masters = 0;
ret = pm8xxx_read_root_irq(chip, &root);
if (ret) {
pr_err("Can't read root status ret=%d\n", ret);
return;
}
/* on pm8xxx series masters start from bit 1 of the root */
masters = root >> 1;
/* Read allowed masters for blocks. */
for (i = 0; i < chip->num_masters; i++)
if (masters & (1 << i))
pm8xxx_irq_master_handler(chip, i);
irq_chip->irq_ack(&desc->irq_data);
}
static void pm8xxx_irq_mask_ack(struct irq_data *d)
{
struct pm_irq_chip *chip = irq_data_get_irq_chip_data(d);
unsigned int pmirq = d->irq - chip->irq_base;
int master, irq_bit;
u8 block, config;
block = pmirq / 8;
master = block / 8;
irq_bit = pmirq % 8;
config = chip->config[pmirq] | PM_IRQF_MASK_ALL | PM_IRQF_CLR;
pm8xxx_config_irq(chip, block, config);
}
static void pm8xxx_irq_unmask(struct irq_data *d)
{
struct pm_irq_chip *chip = irq_data_get_irq_chip_data(d);
unsigned int pmirq = d->irq - chip->irq_base;
int master, irq_bit;
u8 block, config;
block = pmirq / 8;
master = block / 8;
irq_bit = pmirq % 8;
config = chip->config[pmirq];
pm8xxx_config_irq(chip, block, config);
}
static int pm8xxx_irq_set_type(struct irq_data *d, unsigned int flow_type)
{
struct pm_irq_chip *chip = irq_data_get_irq_chip_data(d);
unsigned int pmirq = d->irq - chip->irq_base;
int master, irq_bit;
u8 block, config;
block = pmirq / 8;
master = block / 8;
irq_bit = pmirq % 8;
chip->config[pmirq] = (irq_bit << PM_IRQF_BITS_SHIFT)
| PM_IRQF_MASK_ALL;
if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)) {
if (flow_type & IRQF_TRIGGER_RISING)
chip->config[pmirq] &= ~PM_IRQF_MASK_RE;
if (flow_type & IRQF_TRIGGER_FALLING)
chip->config[pmirq] &= ~PM_IRQF_MASK_FE;
} else {
chip->config[pmirq] |= PM_IRQF_LVL_SEL;
if (flow_type & IRQF_TRIGGER_HIGH)
chip->config[pmirq] &= ~PM_IRQF_MASK_RE;
else
chip->config[pmirq] &= ~PM_IRQF_MASK_FE;
}
config = chip->config[pmirq] | PM_IRQF_CLR;
return pm8xxx_config_irq(chip, block, config);
}
static int pm8xxx_irq_set_wake(struct irq_data *d, unsigned int on)
{
return 0;
}
static struct irq_chip pm8xxx_irq_chip = {
.name = "pm8xxx",
.irq_mask_ack = pm8xxx_irq_mask_ack,
.irq_unmask = pm8xxx_irq_unmask,
.irq_set_type = pm8xxx_irq_set_type,
.irq_set_wake = pm8xxx_irq_set_wake,
.flags = IRQCHIP_MASK_ON_SUSPEND,
};
/**
* pm8xxx_get_irq_stat - get the status of the irq line
* @chip: pointer to identify a pmic irq controller
* @irq: the irq number
*
* The pm8xxx gpio and mpp rely on the interrupt block to read
* the values on their pins. This function is to facilitate reading
* the status of a gpio or an mpp line. The caller has to convert the
* gpio number to irq number.
*
* RETURNS:
* an int indicating the value read on that line
*/
int pm8xxx_get_irq_stat(struct pm_irq_chip *chip, int irq)
{
int pmirq, rc;
u8 block, bits, bit;
unsigned long flags;
if (chip == NULL || irq < chip->irq_base ||
irq >= chip->irq_base + chip->num_irqs)
return -EINVAL;
pmirq = irq - chip->irq_base;
block = pmirq / 8;
bit = pmirq % 8;
spin_lock_irqsave(&chip->pm_irq_lock, flags);
rc = pm8xxx_writeb(chip->dev, SSBI_REG_ADDR_IRQ_BLK_SEL, block);
if (rc) {
pr_err("Failed Selecting block irq=%d pmirq=%d blk=%d rc=%d\n",
irq, pmirq, block, rc);
goto bail_out;
}
rc = pm8xxx_readb(chip->dev, SSBI_REG_ADDR_IRQ_RT_STATUS, &bits);
if (rc) {
pr_err("Failed Configuring irq=%d pmirq=%d blk=%d rc=%d\n",
irq, pmirq, block, rc);
goto bail_out;
}
rc = (bits & (1 << bit)) ? 1 : 0;
bail_out:
spin_unlock_irqrestore(&chip->pm_irq_lock, flags);
return rc;
}
EXPORT_SYMBOL_GPL(pm8xxx_get_irq_stat);
struct pm_irq_chip * pm8xxx_irq_init(struct device *dev,
const struct pm8xxx_irq_platform_data *pdata)
{
struct pm_irq_chip *chip;
int devirq, rc;
unsigned int pmirq;
if (!pdata) {
pr_err("No platform data\n");
return ERR_PTR(-EINVAL);
}
devirq = pdata->devirq;
if (devirq < 0) {
pr_err("missing devirq\n");
rc = devirq;
return ERR_PTR(-EINVAL);
}
chip = kzalloc(sizeof(struct pm_irq_chip)
+ sizeof(u8) * pdata->irq_cdata.nirqs, GFP_KERNEL);
if (!chip) {
pr_err("Cannot alloc pm_irq_chip struct\n");
return ERR_PTR(-EINVAL);
}
chip->dev = dev;
chip->devirq = devirq;
chip->irq_base = pdata->irq_base;
chip->num_irqs = pdata->irq_cdata.nirqs;
chip->num_blocks = DIV_ROUND_UP(chip->num_irqs, 8);
chip->num_masters = DIV_ROUND_UP(chip->num_blocks, 8);
spin_lock_init(&chip->pm_irq_lock);
for (pmirq = 0; pmirq < chip->num_irqs; pmirq++) {
irq_set_chip_and_handler(chip->irq_base + pmirq,
&pm8xxx_irq_chip,
handle_level_irq);
irq_set_chip_data(chip->irq_base + pmirq, chip);
#ifdef CONFIG_ARM
set_irq_flags(chip->irq_base + pmirq, IRQF_VALID);
#else
irq_set_noprobe(chip->irq_base + pmirq);
#endif
}
irq_set_irq_type(devirq, pdata->irq_trigger_flag);
irq_set_handler_data(devirq, chip);
irq_set_chained_handler(devirq, pm8xxx_irq_handler);
set_irq_wake(devirq, 1);
return chip;
}
int pm8xxx_irq_exit(struct pm_irq_chip *chip)
{
irq_set_chained_handler(chip->devirq, NULL);
kfree(chip);
return 0;
}

View File

@ -22,7 +22,6 @@
*/
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/mfd/rc5t583.h>

View File

@ -19,7 +19,6 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>

View File

@ -19,7 +19,6 @@
#include <linux/err.h>
#include <linux/i2c.h>
#include <linux/irq.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/mutex.h>
#include <linux/module.h>

760
drivers/mfd/rtsx_usb.c Normal file
View File

@ -0,0 +1,760 @@
/* Driver for Realtek USB card reader
*
* Copyright(c) 2009-2013 Realtek Semiconductor Corp. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2
* as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, see <http://www.gnu.org/licenses/>.
*
* Author:
* Roger Tseng <rogerable@realtek.com>
*/
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/mutex.h>
#include <linux/usb.h>
#include <linux/platform_device.h>
#include <linux/mfd/core.h>
#include <linux/mfd/rtsx_usb.h>
static int polling_pipe = 1;
module_param(polling_pipe, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(polling_pipe, "polling pipe (0: ctl, 1: bulk)");
static struct mfd_cell rtsx_usb_cells[] = {
[RTSX_USB_SD_CARD] = {
.name = "rtsx_usb_sdmmc",
.pdata_size = 0,
},
[RTSX_USB_MS_CARD] = {
.name = "rtsx_usb_ms",
.pdata_size = 0,
},
};
static void rtsx_usb_sg_timed_out(unsigned long data)
{
struct rtsx_ucr *ucr = (struct rtsx_ucr *)data;
dev_dbg(&ucr->pusb_intf->dev, "%s: sg transfer timed out", __func__);
usb_sg_cancel(&ucr->current_sg);
/* we know the cancellation is caused by time-out */
ucr->current_sg.status = -ETIMEDOUT;
}
static int rtsx_usb_bulk_transfer_sglist(struct rtsx_ucr *ucr,
unsigned int pipe, struct scatterlist *sg, int num_sg,
unsigned int length, unsigned int *act_len, int timeout)
{
int ret;
dev_dbg(&ucr->pusb_intf->dev, "%s: xfer %u bytes, %d entries\n",
__func__, length, num_sg);
ret = usb_sg_init(&ucr->current_sg, ucr->pusb_dev, pipe, 0,
sg, num_sg, length, GFP_NOIO);
if (ret)
return ret;
ucr->sg_timer.expires = jiffies + msecs_to_jiffies(timeout);
add_timer(&ucr->sg_timer);
usb_sg_wait(&ucr->current_sg);
del_timer(&ucr->sg_timer);
if (act_len)
*act_len = ucr->current_sg.bytes;
return ucr->current_sg.status;
}
int rtsx_usb_transfer_data(struct rtsx_ucr *ucr, unsigned int pipe,
void *buf, unsigned int len, int num_sg,
unsigned int *act_len, int timeout)
{
if (timeout < 600)
timeout = 600;
if (num_sg)
return rtsx_usb_bulk_transfer_sglist(ucr, pipe,
(struct scatterlist *)buf, num_sg, len, act_len,
timeout);
else
return usb_bulk_msg(ucr->pusb_dev, pipe, buf, len, act_len,
timeout);
}
EXPORT_SYMBOL_GPL(rtsx_usb_transfer_data);
static inline void rtsx_usb_seq_cmd_hdr(struct rtsx_ucr *ucr,
u16 addr, u16 len, u8 seq_type)
{
rtsx_usb_cmd_hdr_tag(ucr);
ucr->cmd_buf[PACKET_TYPE] = seq_type;
ucr->cmd_buf[5] = (u8)(len >> 8);
ucr->cmd_buf[6] = (u8)len;
ucr->cmd_buf[8] = (u8)(addr >> 8);
ucr->cmd_buf[9] = (u8)addr;
if (seq_type == SEQ_WRITE)
ucr->cmd_buf[STAGE_FLAG] = 0;
else
ucr->cmd_buf[STAGE_FLAG] = STAGE_R;
}
static int rtsx_usb_seq_write_register(struct rtsx_ucr *ucr,
u16 addr, u16 len, u8 *data)
{
u16 cmd_len = ALIGN(SEQ_WRITE_DATA_OFFSET + len, 4);
if (!data)
return -EINVAL;
if (cmd_len > IOBUF_SIZE)
return -EINVAL;
rtsx_usb_seq_cmd_hdr(ucr, addr, len, SEQ_WRITE);
memcpy(ucr->cmd_buf + SEQ_WRITE_DATA_OFFSET, data, len);
return rtsx_usb_transfer_data(ucr,
usb_sndbulkpipe(ucr->pusb_dev, EP_BULK_OUT),
ucr->cmd_buf, cmd_len, 0, NULL, 100);
}
static int rtsx_usb_seq_read_register(struct rtsx_ucr *ucr,
u16 addr, u16 len, u8 *data)
{
int i, ret;
u16 rsp_len = round_down(len, 4);
u16 res_len = len - rsp_len;
if (!data)
return -EINVAL;
/* 4-byte aligned part */
if (rsp_len) {
rtsx_usb_seq_cmd_hdr(ucr, addr, len, SEQ_READ);
ret = rtsx_usb_transfer_data(ucr,
usb_sndbulkpipe(ucr->pusb_dev, EP_BULK_OUT),
ucr->cmd_buf, 12, 0, NULL, 100);
if (ret)
return ret;
ret = rtsx_usb_transfer_data(ucr,
usb_rcvbulkpipe(ucr->pusb_dev, EP_BULK_IN),
data, rsp_len, 0, NULL, 100);
if (ret)
return ret;
}
/* unaligned part */
for (i = 0; i < res_len; i++) {
ret = rtsx_usb_read_register(ucr, addr + rsp_len + i,
data + rsp_len + i);
if (ret)
return ret;
}
return 0;
}
int rtsx_usb_read_ppbuf(struct rtsx_ucr *ucr, u8 *buf, int buf_len)
{
return rtsx_usb_seq_read_register(ucr, PPBUF_BASE2, (u16)buf_len, buf);
}
EXPORT_SYMBOL_GPL(rtsx_usb_read_ppbuf);
int rtsx_usb_write_ppbuf(struct rtsx_ucr *ucr, u8 *buf, int buf_len)
{
return rtsx_usb_seq_write_register(ucr, PPBUF_BASE2, (u16)buf_len, buf);
}
EXPORT_SYMBOL_GPL(rtsx_usb_write_ppbuf);
int rtsx_usb_ep0_write_register(struct rtsx_ucr *ucr, u16 addr,
u8 mask, u8 data)
{
u16 value, index;
addr |= EP0_WRITE_REG_CMD << EP0_OP_SHIFT;
value = swab16(addr);
index = mask | data << 8;
return usb_control_msg(ucr->pusb_dev,
usb_sndctrlpipe(ucr->pusb_dev, 0), RTSX_USB_REQ_REG_OP,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
value, index, NULL, 0, 100);
}
EXPORT_SYMBOL_GPL(rtsx_usb_ep0_write_register);
int rtsx_usb_ep0_read_register(struct rtsx_ucr *ucr, u16 addr, u8 *data)
{
u16 value;
if (!data)
return -EINVAL;
*data = 0;
addr |= EP0_READ_REG_CMD << EP0_OP_SHIFT;
value = swab16(addr);
return usb_control_msg(ucr->pusb_dev,
usb_rcvctrlpipe(ucr->pusb_dev, 0), RTSX_USB_REQ_REG_OP,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
value, 0, data, 1, 100);
}
EXPORT_SYMBOL_GPL(rtsx_usb_ep0_read_register);
void rtsx_usb_add_cmd(struct rtsx_ucr *ucr, u8 cmd_type, u16 reg_addr,
u8 mask, u8 data)
{
int i;
if (ucr->cmd_idx < (IOBUF_SIZE - CMD_OFFSET) / 4) {
i = CMD_OFFSET + ucr->cmd_idx * 4;
ucr->cmd_buf[i++] = ((cmd_type & 0x03) << 6) |
(u8)((reg_addr >> 8) & 0x3F);
ucr->cmd_buf[i++] = (u8)reg_addr;
ucr->cmd_buf[i++] = mask;
ucr->cmd_buf[i++] = data;
ucr->cmd_idx++;
}
}
EXPORT_SYMBOL_GPL(rtsx_usb_add_cmd);
int rtsx_usb_send_cmd(struct rtsx_ucr *ucr, u8 flag, int timeout)
{
int ret;
ucr->cmd_buf[CNT_H] = (u8)(ucr->cmd_idx >> 8);
ucr->cmd_buf[CNT_L] = (u8)(ucr->cmd_idx);
ucr->cmd_buf[STAGE_FLAG] = flag;
ret = rtsx_usb_transfer_data(ucr,
usb_sndbulkpipe(ucr->pusb_dev, EP_BULK_OUT),
ucr->cmd_buf, ucr->cmd_idx * 4 + CMD_OFFSET,
0, NULL, timeout);
if (ret) {
rtsx_usb_clear_fsm_err(ucr);
return ret;
}
return 0;
}
EXPORT_SYMBOL_GPL(rtsx_usb_send_cmd);
int rtsx_usb_get_rsp(struct rtsx_ucr *ucr, int rsp_len, int timeout)
{
if (rsp_len <= 0)
return -EINVAL;
rsp_len = ALIGN(rsp_len, 4);
return rtsx_usb_transfer_data(ucr,
usb_rcvbulkpipe(ucr->pusb_dev, EP_BULK_IN),
ucr->rsp_buf, rsp_len, 0, NULL, timeout);
}
EXPORT_SYMBOL_GPL(rtsx_usb_get_rsp);
static int rtsx_usb_get_status_with_bulk(struct rtsx_ucr *ucr, u16 *status)
{
int ret;
rtsx_usb_init_cmd(ucr);
rtsx_usb_add_cmd(ucr, READ_REG_CMD, CARD_EXIST, 0x00, 0x00);
rtsx_usb_add_cmd(ucr, READ_REG_CMD, OCPSTAT, 0x00, 0x00);
ret = rtsx_usb_send_cmd(ucr, MODE_CR, 100);
if (ret)
return ret;
ret = rtsx_usb_get_rsp(ucr, 2, 100);
if (ret)
return ret;
*status = ((ucr->rsp_buf[0] >> 2) & 0x0f) |
((ucr->rsp_buf[1] & 0x03) << 4);
return 0;
}
int rtsx_usb_get_card_status(struct rtsx_ucr *ucr, u16 *status)
{
int ret;
if (!status)
return -EINVAL;
if (polling_pipe == 0)
ret = usb_control_msg(ucr->pusb_dev,
usb_rcvctrlpipe(ucr->pusb_dev, 0),
RTSX_USB_REQ_POLL,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
0, 0, status, 2, 100);
else
ret = rtsx_usb_get_status_with_bulk(ucr, status);
/* usb_control_msg may return positive when success */
if (ret < 0)
return ret;
return 0;
}
EXPORT_SYMBOL_GPL(rtsx_usb_get_card_status);
static int rtsx_usb_write_phy_register(struct rtsx_ucr *ucr, u8 addr, u8 val)
{
dev_dbg(&ucr->pusb_intf->dev, "Write 0x%x to phy register 0x%x\n",
val, addr);
rtsx_usb_init_cmd(ucr);
rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, HS_VSTAIN, 0xFF, val);
rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, HS_VCONTROL, 0xFF, addr & 0x0F);
rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, HS_VLOADM, 0xFF, 0x00);
rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, HS_VLOADM, 0xFF, 0x00);
rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, HS_VLOADM, 0xFF, 0x01);
rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, HS_VCONTROL,
0xFF, (addr >> 4) & 0x0F);
rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, HS_VLOADM, 0xFF, 0x00);
rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, HS_VLOADM, 0xFF, 0x00);
rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, HS_VLOADM, 0xFF, 0x01);
return rtsx_usb_send_cmd(ucr, MODE_C, 100);
}
int rtsx_usb_write_register(struct rtsx_ucr *ucr, u16 addr, u8 mask, u8 data)
{
rtsx_usb_init_cmd(ucr);
rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, addr, mask, data);
return rtsx_usb_send_cmd(ucr, MODE_C, 100);
}
EXPORT_SYMBOL_GPL(rtsx_usb_write_register);
int rtsx_usb_read_register(struct rtsx_ucr *ucr, u16 addr, u8 *data)
{
int ret;
if (data != NULL)
*data = 0;
rtsx_usb_init_cmd(ucr);
rtsx_usb_add_cmd(ucr, READ_REG_CMD, addr, 0, 0);
ret = rtsx_usb_send_cmd(ucr, MODE_CR, 100);
if (ret)
return ret;
ret = rtsx_usb_get_rsp(ucr, 1, 100);
if (ret)
return ret;
if (data != NULL)
*data = ucr->rsp_buf[0];
return 0;
}
EXPORT_SYMBOL_GPL(rtsx_usb_read_register);
static inline u8 double_ssc_depth(u8 depth)
{
return (depth > 1) ? (depth - 1) : depth;
}
static u8 revise_ssc_depth(u8 ssc_depth, u8 div)
{
if (div > CLK_DIV_1) {
if (ssc_depth > div - 1)
ssc_depth -= (div - 1);
else
ssc_depth = SSC_DEPTH_2M;
}
return ssc_depth;
}
int rtsx_usb_switch_clock(struct rtsx_ucr *ucr, unsigned int card_clock,
u8 ssc_depth, bool initial_mode, bool double_clk, bool vpclk)
{
int ret;
u8 n, clk_divider, mcu_cnt, div;
if (!card_clock) {
ucr->cur_clk = 0;
return 0;
}
if (initial_mode) {
/* We use 250k(around) here, in initial stage */
clk_divider = SD_CLK_DIVIDE_128;
card_clock = 30000000;
} else {
clk_divider = SD_CLK_DIVIDE_0;
}
ret = rtsx_usb_write_register(ucr, SD_CFG1,
SD_CLK_DIVIDE_MASK, clk_divider);
if (ret < 0)
return ret;
card_clock /= 1000000;
dev_dbg(&ucr->pusb_intf->dev,
"Switch card clock to %dMHz\n", card_clock);
if (!initial_mode && double_clk)
card_clock *= 2;
dev_dbg(&ucr->pusb_intf->dev,
"Internal SSC clock: %dMHz (cur_clk = %d)\n",
card_clock, ucr->cur_clk);
if (card_clock == ucr->cur_clk)
return 0;
/* Converting clock value into internal settings: n and div */
n = card_clock - 2;
if ((card_clock <= 2) || (n > MAX_DIV_N))
return -EINVAL;
mcu_cnt = 60/card_clock + 3;
if (mcu_cnt > 15)
mcu_cnt = 15;
/* Make sure that the SSC clock div_n is not less than MIN_DIV_N */
div = CLK_DIV_1;
while (n < MIN_DIV_N && div < CLK_DIV_4) {
n = (n + 2) * 2 - 2;
div++;
}
dev_dbg(&ucr->pusb_intf->dev, "n = %d, div = %d\n", n, div);
if (double_clk)
ssc_depth = double_ssc_depth(ssc_depth);
ssc_depth = revise_ssc_depth(ssc_depth, div);
dev_dbg(&ucr->pusb_intf->dev, "ssc_depth = %d\n", ssc_depth);
rtsx_usb_init_cmd(ucr);
rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CLK_DIV, CLK_CHANGE, CLK_CHANGE);
rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CLK_DIV,
0x3F, (div << 4) | mcu_cnt);
rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SSC_CTL1, SSC_RSTB, 0);
rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SSC_CTL2,
SSC_DEPTH_MASK, ssc_depth);
rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SSC_DIV_N_0, 0xFF, n);
rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SSC_CTL1, SSC_RSTB, SSC_RSTB);
if (vpclk) {
rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_VPCLK0_CTL,
PHASE_NOT_RESET, 0);
rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_VPCLK0_CTL,
PHASE_NOT_RESET, PHASE_NOT_RESET);
}
ret = rtsx_usb_send_cmd(ucr, MODE_C, 2000);
if (ret < 0)
return ret;
ret = rtsx_usb_write_register(ucr, SSC_CTL1, 0xff,
SSC_RSTB | SSC_8X_EN | SSC_SEL_4M);
if (ret < 0)
return ret;
/* Wait SSC clock stable */
usleep_range(100, 1000);
ret = rtsx_usb_write_register(ucr, CLK_DIV, CLK_CHANGE, 0);
if (ret < 0)
return ret;
ucr->cur_clk = card_clock;
return 0;
}
EXPORT_SYMBOL_GPL(rtsx_usb_switch_clock);
int rtsx_usb_card_exclusive_check(struct rtsx_ucr *ucr, int card)
{
int ret;
u16 val;
u16 cd_mask[] = {
[RTSX_USB_SD_CARD] = (CD_MASK & ~SD_CD),
[RTSX_USB_MS_CARD] = (CD_MASK & ~MS_CD)
};
ret = rtsx_usb_get_card_status(ucr, &val);
/*
* If get status fails, return 0 (ok) for the exclusive check
* and let the flow fail at somewhere else.
*/
if (ret)
return 0;
if (val & cd_mask[card])
return -EIO;
return 0;
}
EXPORT_SYMBOL_GPL(rtsx_usb_card_exclusive_check);
static int rtsx_usb_reset_chip(struct rtsx_ucr *ucr)
{
int ret;
u8 val;
rtsx_usb_init_cmd(ucr);
if (CHECK_PKG(ucr, LQFP48)) {
rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PWR_CTL,
LDO3318_PWR_MASK, LDO_SUSPEND);
rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PWR_CTL,
FORCE_LDO_POWERB, FORCE_LDO_POWERB);
rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL1,
0x30, 0x10);
rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL5,
0x03, 0x01);
rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL6,
0x0C, 0x04);
}
rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SYS_DUMMY0, NYET_MSAK, NYET_EN);
rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CD_DEGLITCH_WIDTH, 0xFF, 0x08);
rtsx_usb_add_cmd(ucr, WRITE_REG_CMD,
CD_DEGLITCH_EN, XD_CD_DEGLITCH_EN, 0x0);
rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD30_DRIVE_SEL,
SD30_DRIVE_MASK, DRIVER_TYPE_D);
rtsx_usb_add_cmd(ucr, WRITE_REG_CMD,
CARD_DRIVE_SEL, SD20_DRIVE_MASK, 0x0);
rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, LDO_POWER_CFG, 0xE0, 0x0);
if (ucr->is_rts5179)
rtsx_usb_add_cmd(ucr, WRITE_REG_CMD,
CARD_PULL_CTL5, 0x03, 0x01);
rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_DMA1_CTL,
EXTEND_DMA1_ASYNC_SIGNAL, EXTEND_DMA1_ASYNC_SIGNAL);
rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_INT_PEND,
XD_INT | MS_INT | SD_INT,
XD_INT | MS_INT | SD_INT);
ret = rtsx_usb_send_cmd(ucr, MODE_C, 100);
if (ret)
return ret;
/* config non-crystal mode */
rtsx_usb_read_register(ucr, CFG_MODE, &val);
if ((val & XTAL_FREE) || ((val & CLK_MODE_MASK) == CLK_MODE_NON_XTAL)) {
ret = rtsx_usb_write_phy_register(ucr, 0xC2, 0x7C);
if (ret)
return ret;
}
return 0;
}
static int rtsx_usb_init_chip(struct rtsx_ucr *ucr)
{
int ret;
u8 val;
rtsx_usb_clear_fsm_err(ucr);
/* power on SSC */
ret = rtsx_usb_write_register(ucr,
FPDCTL, SSC_POWER_MASK, SSC_POWER_ON);
if (ret)
return ret;
usleep_range(100, 1000);
ret = rtsx_usb_write_register(ucr, CLK_DIV, CLK_CHANGE, 0x00);
if (ret)
return ret;
/* determine IC version */
ret = rtsx_usb_read_register(ucr, HW_VERSION, &val);
if (ret)
return ret;
ucr->ic_version = val & HW_VER_MASK;
/* determine package */
ret = rtsx_usb_read_register(ucr, CARD_SHARE_MODE, &val);
if (ret)
return ret;
if (val & CARD_SHARE_LQFP_SEL) {
ucr->package = LQFP48;
dev_dbg(&ucr->pusb_intf->dev, "Package: LQFP48\n");
} else {
ucr->package = QFN24;
dev_dbg(&ucr->pusb_intf->dev, "Package: QFN24\n");
}
/* determine IC variations */
rtsx_usb_read_register(ucr, CFG_MODE_1, &val);
if (val & RTS5179) {
ucr->is_rts5179 = true;
dev_dbg(&ucr->pusb_intf->dev, "Device is rts5179\n");
} else {
ucr->is_rts5179 = false;
}
return rtsx_usb_reset_chip(ucr);
}
static int rtsx_usb_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
struct usb_device *usb_dev = interface_to_usbdev(intf);
struct rtsx_ucr *ucr;
int ret;
dev_dbg(&intf->dev,
": Realtek USB Card Reader found at bus %03d address %03d\n",
usb_dev->bus->busnum, usb_dev->devnum);
ucr = devm_kzalloc(&intf->dev, sizeof(*ucr), GFP_KERNEL);
if (!ucr)
return -ENOMEM;
ucr->pusb_dev = usb_dev;
ucr->iobuf = usb_alloc_coherent(ucr->pusb_dev, IOBUF_SIZE,
GFP_KERNEL, &ucr->iobuf_dma);
if (!ucr->iobuf)
return -ENOMEM;
usb_set_intfdata(intf, ucr);
ucr->vendor_id = id->idVendor;
ucr->product_id = id->idProduct;
ucr->cmd_buf = ucr->rsp_buf = ucr->iobuf;
mutex_init(&ucr->dev_mutex);
ucr->pusb_intf = intf;
/* initialize */
ret = rtsx_usb_init_chip(ucr);
if (ret)
goto out_init_fail;
ret = mfd_add_devices(&intf->dev, usb_dev->devnum, rtsx_usb_cells,
ARRAY_SIZE(rtsx_usb_cells), NULL, 0, NULL);
if (ret)
goto out_init_fail;
/* initialize USB SG transfer timer */
init_timer(&ucr->sg_timer);
setup_timer(&ucr->sg_timer, rtsx_usb_sg_timed_out, (unsigned long) ucr);
#ifdef CONFIG_PM
intf->needs_remote_wakeup = 1;
usb_enable_autosuspend(usb_dev);
#endif
return 0;
out_init_fail:
usb_free_coherent(ucr->pusb_dev, IOBUF_SIZE, ucr->iobuf,
ucr->iobuf_dma);
return ret;
}
static void rtsx_usb_disconnect(struct usb_interface *intf)
{
struct rtsx_ucr *ucr = (struct rtsx_ucr *)usb_get_intfdata(intf);
dev_dbg(&intf->dev, "%s called\n", __func__);
mfd_remove_devices(&intf->dev);
usb_set_intfdata(ucr->pusb_intf, NULL);
usb_free_coherent(ucr->pusb_dev, IOBUF_SIZE, ucr->iobuf,
ucr->iobuf_dma);
}
#ifdef CONFIG_PM
static int rtsx_usb_suspend(struct usb_interface *intf, pm_message_t message)
{
struct rtsx_ucr *ucr =
(struct rtsx_ucr *)usb_get_intfdata(intf);
dev_dbg(&intf->dev, "%s called with pm message 0x%04u\n",
__func__, message.event);
mutex_lock(&ucr->dev_mutex);
rtsx_usb_turn_off_led(ucr);
mutex_unlock(&ucr->dev_mutex);
return 0;
}
static int rtsx_usb_resume(struct usb_interface *intf)
{
return 0;
}
static int rtsx_usb_reset_resume(struct usb_interface *intf)
{
struct rtsx_ucr *ucr =
(struct rtsx_ucr *)usb_get_intfdata(intf);
rtsx_usb_reset_chip(ucr);
return 0;
}
#else /* CONFIG_PM */
#define rtsx_usb_suspend NULL
#define rtsx_usb_resume NULL
#define rtsx_usb_reset_resume NULL
#endif /* CONFIG_PM */
static int rtsx_usb_pre_reset(struct usb_interface *intf)
{
struct rtsx_ucr *ucr = (struct rtsx_ucr *)usb_get_intfdata(intf);
mutex_lock(&ucr->dev_mutex);
return 0;
}
static int rtsx_usb_post_reset(struct usb_interface *intf)
{
struct rtsx_ucr *ucr = (struct rtsx_ucr *)usb_get_intfdata(intf);
mutex_unlock(&ucr->dev_mutex);
return 0;
}
static struct usb_device_id rtsx_usb_usb_ids[] = {
{ USB_DEVICE(0x0BDA, 0x0129) },
{ USB_DEVICE(0x0BDA, 0x0139) },
{ USB_DEVICE(0x0BDA, 0x0140) },
{ }
};
static struct usb_driver rtsx_usb_driver = {
.name = "rtsx_usb",
.probe = rtsx_usb_probe,
.disconnect = rtsx_usb_disconnect,
.suspend = rtsx_usb_suspend,
.resume = rtsx_usb_resume,
.reset_resume = rtsx_usb_reset_resume,
.pre_reset = rtsx_usb_pre_reset,
.post_reset = rtsx_usb_post_reset,
.id_table = rtsx_usb_usb_ids,
.supports_autosuspend = 1,
.soft_unbind = 1,
};
module_usb_driver(rtsx_usb_driver);
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Roger Tseng <rogerable@realtek.com>");
MODULE_DESCRIPTION("Realtek USB Card Reader Driver");

View File

@ -60,6 +60,7 @@ static const struct mfd_cell s5m8767_devs[] = {
.name = "s5m-rtc",
}, {
.name = "s5m8767-clk",
.of_compatible = "samsung,s5m8767-clk",
}
};
@ -68,6 +69,7 @@ static const struct mfd_cell s2mps11_devs[] = {
.name = "s2mps11-pmic",
}, {
.name = "s2mps11-clk",
.of_compatible = "samsung,s2mps11-clk",
}
};
@ -78,6 +80,7 @@ static const struct mfd_cell s2mps14_devs[] = {
.name = "s2mps14-rtc",
}, {
.name = "s2mps14-clk",
.of_compatible = "samsung,s2mps14-clk",
}
};
@ -295,6 +298,13 @@ static int sec_pmic_probe(struct i2c_client *i2c,
switch (sec_pmic->device_type) {
case S2MPA01:
regmap = &s2mpa01_regmap_config;
/*
* The rtc-s5m driver does not support S2MPA01 and there
* is no mfd_cell for S2MPA01 RTC device.
* However we must pass something to devm_regmap_init_i2c()
* so use S5M-like regmap config even though it wouldn't work.
*/
regmap_rtc = &s5m_rtc_regmap_config;
break;
case S2MPS11X:
regmap = &s2mps11_regmap_config;
@ -344,7 +354,7 @@ static int sec_pmic_probe(struct i2c_client *i2c,
ret = PTR_ERR(sec_pmic->regmap_rtc);
dev_err(&i2c->dev, "Failed to allocate RTC register map: %d\n",
ret);
return ret;
goto err_regmap_rtc;
}
if (pdata && pdata->cfg_pmic_irq)
@ -385,14 +395,15 @@ static int sec_pmic_probe(struct i2c_client *i2c,
}
if (ret)
goto err;
goto err_mfd;
device_init_wakeup(sec_pmic->dev, sec_pmic->wakeup);
return ret;
err:
err_mfd:
sec_irq_exit(sec_pmic);
err_regmap_rtc:
i2c_unregister_device(sec_pmic->rtc);
return ret;
}

View File

@ -13,7 +13,6 @@
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/gpio.h>

View File

@ -706,7 +706,7 @@ static int stmpe1801_reset(struct stmpe *stmpe)
if (!(ret & STMPE1801_MSK_SYS_CTRL_RESET))
return 0;
usleep_range(100, 200);
};
}
return -EIO;
}

View File

@ -167,7 +167,7 @@ static struct mfd_cell stw481x_cells[] = {
},
};
const struct regmap_config stw481x_regmap_config = {
static const struct regmap_config stw481x_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
};
@ -186,6 +186,12 @@ static int stw481x_probe(struct i2c_client *client,
i2c_set_clientdata(client, stw481x);
stw481x->client = client;
stw481x->map = devm_regmap_init_i2c(client, &stw481x_regmap_config);
if (IS_ERR(stw481x->map)) {
ret = PTR_ERR(stw481x->map);
dev_err(&client->dev, "Failed to allocate register map: %d\n",
ret);
return ret;
}
ret = stw481x_startup(stw481x);
if (ret) {

View File

@ -69,13 +69,6 @@ EXPORT_SYMBOL_GPL(syscon_regmap_lookup_by_compatible);
static int syscon_match_pdevname(struct device *dev, void *data)
{
struct platform_device *pdev = to_platform_device(dev);
const struct platform_device_id *id = platform_get_device_id(pdev);
if (id)
if (!strcmp(id->name, (const char *)data))
return 1;
return !strcmp(dev_name(dev), (const char *)data);
}
@ -152,7 +145,7 @@ static int syscon_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, syscon);
dev_info(dev, "regmap %pR registered\n", res);
dev_dbg(dev, "regmap %pR registered\n", res);
return 0;
}

View File

@ -13,8 +13,10 @@
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/mfd/core.h>
#include <linux/mfd/tc3589x.h>
#include <linux/err.h>
/**
* enum tc3589x_version - indicates the TC3589x version
@ -160,7 +162,7 @@ static const struct mfd_cell tc3589x_dev_gpio[] = {
.name = "tc3589x-gpio",
.num_resources = ARRAY_SIZE(gpio_resources),
.resources = &gpio_resources[0],
.of_compatible = "tc3589x-gpio",
.of_compatible = "toshiba,tc3589x-gpio",
},
};
@ -169,7 +171,7 @@ static const struct mfd_cell tc3589x_dev_keypad[] = {
.name = "tc3589x-keypad",
.num_resources = ARRAY_SIZE(keypad_resources),
.resources = &keypad_resources[0],
.of_compatible = "tc3589x-keypad",
.of_compatible = "toshiba,tc3589x-keypad",
},
};
@ -318,45 +320,74 @@ static int tc3589x_device_init(struct tc3589x *tc3589x)
return ret;
}
static int tc3589x_of_probe(struct device_node *np,
struct tc3589x_platform_data *pdata)
#ifdef CONFIG_OF
static const struct of_device_id tc3589x_match[] = {
/* Legacy compatible string */
{ .compatible = "tc3589x", .data = (void *) TC3589X_UNKNOWN },
{ .compatible = "toshiba,tc35890", .data = (void *) TC3589X_TC35890 },
{ .compatible = "toshiba,tc35892", .data = (void *) TC3589X_TC35892 },
{ .compatible = "toshiba,tc35893", .data = (void *) TC3589X_TC35893 },
{ .compatible = "toshiba,tc35894", .data = (void *) TC3589X_TC35894 },
{ .compatible = "toshiba,tc35895", .data = (void *) TC3589X_TC35895 },
{ .compatible = "toshiba,tc35896", .data = (void *) TC3589X_TC35896 },
{ }
};
MODULE_DEVICE_TABLE(of, tc3589x_match);
static struct tc3589x_platform_data *
tc3589x_of_probe(struct device *dev, enum tc3589x_version *version)
{
struct device_node *np = dev->of_node;
struct tc3589x_platform_data *pdata;
struct device_node *child;
const struct of_device_id *of_id;
pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
return ERR_PTR(-ENOMEM);
of_id = of_match_device(tc3589x_match, dev);
if (!of_id)
return ERR_PTR(-ENODEV);
*version = (enum tc3589x_version) of_id->data;
for_each_child_of_node(np, child) {
if (!strcmp(child->name, "tc3589x_gpio")) {
if (of_device_is_compatible(child, "toshiba,tc3589x-gpio"))
pdata->block |= TC3589x_BLOCK_GPIO;
}
if (!strcmp(child->name, "tc3589x_keypad")) {
if (of_device_is_compatible(child, "toshiba,tc3589x-keypad"))
pdata->block |= TC3589x_BLOCK_KEYPAD;
}
}
return 0;
return pdata;
}
#else
static inline struct tc3589x_platform_data *
tc3589x_of_probe(struct device *dev, enum tc3589x_version *version)
{
dev_err(dev, "no device tree support\n");
return ERR_PTR(-ENODEV);
}
#endif
static int tc3589x_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct tc3589x_platform_data *pdata = dev_get_platdata(&i2c->dev);
struct device_node *np = i2c->dev.of_node;
struct tc3589x_platform_data *pdata = dev_get_platdata(&i2c->dev);
struct tc3589x *tc3589x;
enum tc3589x_version version;
int ret;
if (!pdata) {
if (np) {
pdata = devm_kzalloc(&i2c->dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
return -ENOMEM;
ret = tc3589x_of_probe(np, pdata);
if (ret)
return ret;
}
else {
pdata = tc3589x_of_probe(&i2c->dev, &version);
if (IS_ERR(pdata)) {
dev_err(&i2c->dev, "No platform data or DT found\n");
return -EINVAL;
return PTR_ERR(pdata);
}
} else {
/* When not probing from device tree we have this ID */
version = id->driver_data;
}
if (!i2c_check_functionality(i2c->adapter, I2C_FUNC_SMBUS_BYTE_DATA
@ -375,7 +406,7 @@ static int tc3589x_probe(struct i2c_client *i2c,
tc3589x->pdata = pdata;
tc3589x->irq_base = pdata->irq_base;
switch (id->driver_data) {
switch (version) {
case TC3589X_TC35893:
case TC3589X_TC35895:
case TC3589X_TC35896:
@ -471,9 +502,12 @@ static const struct i2c_device_id tc3589x_id[] = {
MODULE_DEVICE_TABLE(i2c, tc3589x_id);
static struct i2c_driver tc3589x_driver = {
.driver.name = "tc3589x",
.driver.owner = THIS_MODULE,
.driver.pm = &tc3589x_dev_pm_ops,
.driver = {
.name = "tc3589x",
.owner = THIS_MODULE,
.pm = &tc3589x_dev_pm_ops,
.of_match_table = of_match_ptr(tc3589x_match),
},
.probe = tc3589x_probe,
.remove = tc3589x_remove,
.id_table = tc3589x_id,

View File

@ -1,465 +0,0 @@
/*
* Sequencer Serial Port (SSP) driver for Texas Instruments' SoCs
*
* Copyright (C) 2010 Texas Instruments Inc
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/init.h>
#include <linux/wait.h>
#include <linux/clk.h>
#include <linux/interrupt.h>
#include <linux/device.h>
#include <linux/spinlock.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/sched.h>
#include <linux/mfd/core.h>
#include <linux/mfd/ti_ssp.h>
/* Register Offsets */
#define REG_REV 0x00
#define REG_IOSEL_1 0x04
#define REG_IOSEL_2 0x08
#define REG_PREDIV 0x0c
#define REG_INTR_ST 0x10
#define REG_INTR_EN 0x14
#define REG_TEST_CTRL 0x18
/* Per port registers */
#define PORT_CFG_2 0x00
#define PORT_ADDR 0x04
#define PORT_DATA 0x08
#define PORT_CFG_1 0x0c
#define PORT_STATE 0x10
#define SSP_PORT_CONFIG_MASK (SSP_EARLY_DIN | SSP_DELAY_DOUT)
#define SSP_PORT_CLKRATE_MASK 0x0f
#define SSP_SEQRAM_WR_EN BIT(4)
#define SSP_SEQRAM_RD_EN BIT(5)
#define SSP_START BIT(15)
#define SSP_BUSY BIT(10)
#define SSP_PORT_ASL BIT(7)
#define SSP_PORT_CFO1 BIT(6)
#define SSP_PORT_SEQRAM_SIZE 32
static const int ssp_port_base[] = {0x040, 0x080};
static const int ssp_port_seqram[] = {0x100, 0x180};
struct ti_ssp {
struct resource *res;
struct device *dev;
void __iomem *regs;
spinlock_t lock;
struct clk *clk;
int irq;
wait_queue_head_t wqh;
/*
* Some of the iosel2 register bits always read-back as 0, we need to
* remember these values so that we don't clobber previously set
* values.
*/
u32 iosel2;
};
static inline struct ti_ssp *dev_to_ssp(struct device *dev)
{
return dev_get_drvdata(dev->parent);
}
static inline int dev_to_port(struct device *dev)
{
return to_platform_device(dev)->id;
}
/* Register Access Helpers, rmw() functions need to run locked */
static inline u32 ssp_read(struct ti_ssp *ssp, int reg)
{
return __raw_readl(ssp->regs + reg);
}
static inline void ssp_write(struct ti_ssp *ssp, int reg, u32 val)
{
__raw_writel(val, ssp->regs + reg);
}
static inline void ssp_rmw(struct ti_ssp *ssp, int reg, u32 mask, u32 bits)
{
ssp_write(ssp, reg, (ssp_read(ssp, reg) & ~mask) | bits);
}
static inline u32 ssp_port_read(struct ti_ssp *ssp, int port, int reg)
{
return ssp_read(ssp, ssp_port_base[port] + reg);
}
static inline void ssp_port_write(struct ti_ssp *ssp, int port, int reg,
u32 val)
{
ssp_write(ssp, ssp_port_base[port] + reg, val);
}
static inline void ssp_port_rmw(struct ti_ssp *ssp, int port, int reg,
u32 mask, u32 bits)
{
ssp_rmw(ssp, ssp_port_base[port] + reg, mask, bits);
}
static inline void ssp_port_clr_bits(struct ti_ssp *ssp, int port, int reg,
u32 bits)
{
ssp_port_rmw(ssp, port, reg, bits, 0);
}
static inline void ssp_port_set_bits(struct ti_ssp *ssp, int port, int reg,
u32 bits)
{
ssp_port_rmw(ssp, port, reg, 0, bits);
}
/* Called to setup port clock mode, caller must hold ssp->lock */
static int __set_mode(struct ti_ssp *ssp, int port, int mode)
{
mode &= SSP_PORT_CONFIG_MASK;
ssp_port_rmw(ssp, port, PORT_CFG_1, SSP_PORT_CONFIG_MASK, mode);
return 0;
}
int ti_ssp_set_mode(struct device *dev, int mode)
{
struct ti_ssp *ssp = dev_to_ssp(dev);
int port = dev_to_port(dev);
int ret;
spin_lock(&ssp->lock);
ret = __set_mode(ssp, port, mode);
spin_unlock(&ssp->lock);
return ret;
}
EXPORT_SYMBOL(ti_ssp_set_mode);
/* Called to setup iosel2, caller must hold ssp->lock */
static void __set_iosel2(struct ti_ssp *ssp, u32 mask, u32 val)
{
ssp->iosel2 = (ssp->iosel2 & ~mask) | val;
ssp_write(ssp, REG_IOSEL_2, ssp->iosel2);
}
/* Called to setup port iosel, caller must hold ssp->lock */
static void __set_iosel(struct ti_ssp *ssp, int port, u32 iosel)
{
unsigned val, shift = port ? 16 : 0;
/* IOSEL1 gets the least significant 16 bits */
val = ssp_read(ssp, REG_IOSEL_1);
val &= 0xffff << (port ? 0 : 16);
val |= (iosel & 0xffff) << (port ? 16 : 0);
ssp_write(ssp, REG_IOSEL_1, val);
/* IOSEL2 gets the most significant 16 bits */
val = (iosel >> 16) & 0x7;
__set_iosel2(ssp, 0x7 << shift, val << shift);
}
int ti_ssp_set_iosel(struct device *dev, u32 iosel)
{
struct ti_ssp *ssp = dev_to_ssp(dev);
int port = dev_to_port(dev);
spin_lock(&ssp->lock);
__set_iosel(ssp, port, iosel);
spin_unlock(&ssp->lock);
return 0;
}
EXPORT_SYMBOL(ti_ssp_set_iosel);
int ti_ssp_load(struct device *dev, int offs, u32* prog, int len)
{
struct ti_ssp *ssp = dev_to_ssp(dev);
int port = dev_to_port(dev);
int i;
if (len > SSP_PORT_SEQRAM_SIZE)
return -ENOSPC;
spin_lock(&ssp->lock);
/* Enable SeqRAM access */
ssp_port_set_bits(ssp, port, PORT_CFG_2, SSP_SEQRAM_WR_EN);
/* Copy code */
for (i = 0; i < len; i++) {
__raw_writel(prog[i], ssp->regs + offs + 4*i +
ssp_port_seqram[port]);
}
/* Disable SeqRAM access */
ssp_port_clr_bits(ssp, port, PORT_CFG_2, SSP_SEQRAM_WR_EN);
spin_unlock(&ssp->lock);
return 0;
}
EXPORT_SYMBOL(ti_ssp_load);
int ti_ssp_raw_read(struct device *dev)
{
struct ti_ssp *ssp = dev_to_ssp(dev);
int port = dev_to_port(dev);
int shift = port ? 27 : 11;
return (ssp_read(ssp, REG_IOSEL_2) >> shift) & 0xf;
}
EXPORT_SYMBOL(ti_ssp_raw_read);
int ti_ssp_raw_write(struct device *dev, u32 val)
{
struct ti_ssp *ssp = dev_to_ssp(dev);
int port = dev_to_port(dev), shift;
spin_lock(&ssp->lock);
shift = port ? 22 : 6;
val &= 0xf;
__set_iosel2(ssp, 0xf << shift, val << shift);
spin_unlock(&ssp->lock);
return 0;
}
EXPORT_SYMBOL(ti_ssp_raw_write);
static inline int __xfer_done(struct ti_ssp *ssp, int port)
{
return !(ssp_port_read(ssp, port, PORT_CFG_1) & SSP_BUSY);
}
int ti_ssp_run(struct device *dev, u32 pc, u32 input, u32 *output)
{
struct ti_ssp *ssp = dev_to_ssp(dev);
int port = dev_to_port(dev);
int ret;
if (pc & ~(0x3f))
return -EINVAL;
/* Grab ssp->lock to serialize rmw on ssp registers */
spin_lock(&ssp->lock);
ssp_port_write(ssp, port, PORT_ADDR, input >> 16);
ssp_port_write(ssp, port, PORT_DATA, input & 0xffff);
ssp_port_rmw(ssp, port, PORT_CFG_1, 0x3f, pc);
/* grab wait queue head lock to avoid race with the isr */
spin_lock_irq(&ssp->wqh.lock);
/* kick off sequence execution in hardware */
ssp_port_set_bits(ssp, port, PORT_CFG_1, SSP_START);
/* drop ssp lock; no register writes beyond this */
spin_unlock(&ssp->lock);
ret = wait_event_interruptible_locked_irq(ssp->wqh,
__xfer_done(ssp, port));
spin_unlock_irq(&ssp->wqh.lock);
if (ret < 0)
return ret;
if (output) {
*output = (ssp_port_read(ssp, port, PORT_ADDR) << 16) |
(ssp_port_read(ssp, port, PORT_DATA) & 0xffff);
}
ret = ssp_port_read(ssp, port, PORT_STATE) & 0x3f; /* stop address */
return ret;
}
EXPORT_SYMBOL(ti_ssp_run);
static irqreturn_t ti_ssp_interrupt(int irq, void *dev_data)
{
struct ti_ssp *ssp = dev_data;
spin_lock(&ssp->wqh.lock);
ssp_write(ssp, REG_INTR_ST, 0x3);
wake_up_locked(&ssp->wqh);
spin_unlock(&ssp->wqh.lock);
return IRQ_HANDLED;
}
static int ti_ssp_probe(struct platform_device *pdev)
{
static struct ti_ssp *ssp;
const struct ti_ssp_data *pdata = dev_get_platdata(&pdev->dev);
int error = 0, prediv = 0xff, id;
unsigned long sysclk;
struct device *dev = &pdev->dev;
struct mfd_cell cells[2];
ssp = kzalloc(sizeof(*ssp), GFP_KERNEL);
if (!ssp) {
dev_err(dev, "cannot allocate device info\n");
return -ENOMEM;
}
ssp->dev = dev;
dev_set_drvdata(dev, ssp);
ssp->res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!ssp->res) {
error = -ENODEV;
dev_err(dev, "cannot determine register area\n");
goto error_res;
}
if (!request_mem_region(ssp->res->start, resource_size(ssp->res),
pdev->name)) {
error = -ENOMEM;
dev_err(dev, "cannot claim register memory\n");
goto error_res;
}
ssp->regs = ioremap(ssp->res->start, resource_size(ssp->res));
if (!ssp->regs) {
error = -ENOMEM;
dev_err(dev, "cannot map register memory\n");
goto error_map;
}
ssp->clk = clk_get(dev, NULL);
if (IS_ERR(ssp->clk)) {
error = PTR_ERR(ssp->clk);
dev_err(dev, "cannot claim device clock\n");
goto error_clk;
}
ssp->irq = platform_get_irq(pdev, 0);
if (ssp->irq < 0) {
error = -ENODEV;
dev_err(dev, "unknown irq\n");
goto error_irq;
}
error = request_threaded_irq(ssp->irq, NULL, ti_ssp_interrupt, 0,
dev_name(dev), ssp);
if (error < 0) {
dev_err(dev, "cannot acquire irq\n");
goto error_irq;
}
spin_lock_init(&ssp->lock);
init_waitqueue_head(&ssp->wqh);
/* Power on and initialize SSP */
error = clk_enable(ssp->clk);
if (error) {
dev_err(dev, "cannot enable device clock\n");
goto error_enable;
}
/* Reset registers to a sensible known state */
ssp_write(ssp, REG_IOSEL_1, 0);
ssp_write(ssp, REG_IOSEL_2, 0);
ssp_write(ssp, REG_INTR_EN, 0x3);
ssp_write(ssp, REG_INTR_ST, 0x3);
ssp_write(ssp, REG_TEST_CTRL, 0);
ssp_port_write(ssp, 0, PORT_CFG_1, SSP_PORT_ASL);
ssp_port_write(ssp, 1, PORT_CFG_1, SSP_PORT_ASL);
ssp_port_write(ssp, 0, PORT_CFG_2, SSP_PORT_CFO1);
ssp_port_write(ssp, 1, PORT_CFG_2, SSP_PORT_CFO1);
sysclk = clk_get_rate(ssp->clk);
if (pdata && pdata->out_clock)
prediv = (sysclk / pdata->out_clock) - 1;
prediv = clamp(prediv, 0, 0xff);
ssp_rmw(ssp, REG_PREDIV, 0xff, prediv);
memset(cells, 0, sizeof(cells));
for (id = 0; id < 2; id++) {
const struct ti_ssp_dev_data *data = &pdata->dev_data[id];
cells[id].id = id;
cells[id].name = data->dev_name;
cells[id].platform_data = data->pdata;
}
error = mfd_add_devices(dev, 0, cells, 2, NULL, 0, NULL);
if (error < 0) {
dev_err(dev, "cannot add mfd cells\n");
goto error_enable;
}
return 0;
error_enable:
free_irq(ssp->irq, ssp);
error_irq:
clk_put(ssp->clk);
error_clk:
iounmap(ssp->regs);
error_map:
release_mem_region(ssp->res->start, resource_size(ssp->res));
error_res:
kfree(ssp);
return error;
}
static int ti_ssp_remove(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct ti_ssp *ssp = dev_get_drvdata(dev);
mfd_remove_devices(dev);
clk_disable(ssp->clk);
free_irq(ssp->irq, ssp);
clk_put(ssp->clk);
iounmap(ssp->regs);
release_mem_region(ssp->res->start, resource_size(ssp->res));
kfree(ssp);
return 0;
}
static struct platform_driver ti_ssp_driver = {
.probe = ti_ssp_probe,
.remove = ti_ssp_remove,
.driver = {
.name = "ti-ssp",
.owner = THIS_MODULE,
}
};
module_platform_driver(ti_ssp_driver);
MODULE_DESCRIPTION("Sequencer Serial Port (SSP) Driver");
MODULE_AUTHOR("Cyril Chemparathy");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:ti-ssp");

View File

@ -14,7 +14,6 @@
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/io.h>
@ -184,12 +183,6 @@ static int ti_tscadc_probe(struct platform_device *pdev)
return -EINVAL;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(&pdev->dev, "no memory resource defined.\n");
return -EINVAL;
}
/* Allocate memory for device */
tscadc = devm_kzalloc(&pdev->dev,
sizeof(struct ti_tscadc_dev), GFP_KERNEL);
@ -206,19 +199,10 @@ static int ti_tscadc_probe(struct platform_device *pdev)
} else
tscadc->irq = err;
res = devm_request_mem_region(&pdev->dev,
res->start, resource_size(res), pdev->name);
if (!res) {
dev_err(&pdev->dev, "failed to reserve registers.\n");
return -EBUSY;
}
tscadc->tscadc_base = devm_ioremap(&pdev->dev,
res->start, resource_size(res));
if (!tscadc->tscadc_base) {
dev_err(&pdev->dev, "failed to map registers.\n");
return -ENOMEM;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
tscadc->tscadc_base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(tscadc->tscadc_base))
return PTR_ERR(tscadc->tscadc_base);
tscadc->regmap_tscadc = devm_regmap_init_mmio(&pdev->dev,
tscadc->tscadc_base, &tscadc_regmap_config);

View File

@ -715,7 +715,7 @@ static int timb_probe(struct pci_dev *dev,
for (i = 0; i < TIMBERDALE_NR_IRQS; i++)
msix_entries[i].entry = i;
err = pci_enable_msix(dev, msix_entries, TIMBERDALE_NR_IRQS);
err = pci_enable_msix_exact(dev, msix_entries, TIMBERDALE_NR_IRQS);
if (err) {
dev_err(&dev->dev,
"MSI-X init failed: %d, expected entries: %d\n",

282
drivers/mfd/tps65218.c Normal file
View File

@ -0,0 +1,282 @@
/*
* Driver for TPS65218 Integrated power management chipsets
*
* Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
* kind, whether expressed or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License version 2 for more details.
*/
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/slab.h>
#include <linux/regmap.h>
#include <linux/err.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/mutex.h>
#include <linux/mfd/core.h>
#include <linux/mfd/tps65218.h>
#define TPS65218_PASSWORD_REGS_UNLOCK 0x7D
/**
* tps65218_reg_read: Read a single tps65218 register.
*
* @tps: Device to read from.
* @reg: Register to read.
* @val: Contians the value
*/
int tps65218_reg_read(struct tps65218 *tps, unsigned int reg,
unsigned int *val)
{
return regmap_read(tps->regmap, reg, val);
}
EXPORT_SYMBOL_GPL(tps65218_reg_read);
/**
* tps65218_reg_write: Write a single tps65218 register.
*
* @tps65218: Device to write to.
* @reg: Register to write to.
* @val: Value to write.
* @level: Password protected level
*/
int tps65218_reg_write(struct tps65218 *tps, unsigned int reg,
unsigned int val, unsigned int level)
{
int ret;
unsigned int xor_reg_val;
switch (level) {
case TPS65218_PROTECT_NONE:
return regmap_write(tps->regmap, reg, val);
case TPS65218_PROTECT_L1:
xor_reg_val = reg ^ TPS65218_PASSWORD_REGS_UNLOCK;
ret = regmap_write(tps->regmap, TPS65218_REG_PASSWORD,
xor_reg_val);
if (ret < 0)
return ret;
return regmap_write(tps->regmap, reg, val);
default:
return -EINVAL;
}
}
EXPORT_SYMBOL_GPL(tps65218_reg_write);
/**
* tps65218_update_bits: Modify bits w.r.t mask, val and level.
*
* @tps65218: Device to write to.
* @reg: Register to read-write to.
* @mask: Mask.
* @val: Value to write.
* @level: Password protected level
*/
static int tps65218_update_bits(struct tps65218 *tps, unsigned int reg,
unsigned int mask, unsigned int val, unsigned int level)
{
int ret;
unsigned int data;
ret = tps65218_reg_read(tps, reg, &data);
if (ret) {
dev_err(tps->dev, "Read from reg 0x%x failed\n", reg);
return ret;
}
data &= ~mask;
data |= val & mask;
mutex_lock(&tps->tps_lock);
ret = tps65218_reg_write(tps, reg, data, level);
if (ret)
dev_err(tps->dev, "Write for reg 0x%x failed\n", reg);
mutex_unlock(&tps->tps_lock);
return ret;
}
int tps65218_set_bits(struct tps65218 *tps, unsigned int reg,
unsigned int mask, unsigned int val, unsigned int level)
{
return tps65218_update_bits(tps, reg, mask, val, level);
}
EXPORT_SYMBOL_GPL(tps65218_set_bits);
int tps65218_clear_bits(struct tps65218 *tps, unsigned int reg,
unsigned int mask, unsigned int level)
{
return tps65218_update_bits(tps, reg, mask, 0, level);
}
EXPORT_SYMBOL_GPL(tps65218_clear_bits);
static struct regmap_config tps65218_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.cache_type = REGCACHE_RBTREE,
};
static const struct regmap_irq tps65218_irqs[] = {
/* INT1 IRQs */
[TPS65218_PRGC_IRQ] = {
.mask = TPS65218_INT1_PRGC,
},
[TPS65218_CC_AQC_IRQ] = {
.mask = TPS65218_INT1_CC_AQC,
},
[TPS65218_HOT_IRQ] = {
.mask = TPS65218_INT1_HOT,
},
[TPS65218_PB_IRQ] = {
.mask = TPS65218_INT1_PB,
},
[TPS65218_AC_IRQ] = {
.mask = TPS65218_INT1_AC,
},
[TPS65218_VPRG_IRQ] = {
.mask = TPS65218_INT1_VPRG,
},
[TPS65218_INVALID1_IRQ] = {
},
[TPS65218_INVALID2_IRQ] = {
},
/* INT2 IRQs*/
[TPS65218_LS1_I_IRQ] = {
.mask = TPS65218_INT2_LS1_I,
.reg_offset = 1,
},
[TPS65218_LS2_I_IRQ] = {
.mask = TPS65218_INT2_LS2_I,
.reg_offset = 1,
},
[TPS65218_LS3_I_IRQ] = {
.mask = TPS65218_INT2_LS3_I,
.reg_offset = 1,
},
[TPS65218_LS1_F_IRQ] = {
.mask = TPS65218_INT2_LS1_F,
.reg_offset = 1,
},
[TPS65218_LS2_F_IRQ] = {
.mask = TPS65218_INT2_LS2_F,
.reg_offset = 1,
},
[TPS65218_LS3_F_IRQ] = {
.mask = TPS65218_INT2_LS3_F,
.reg_offset = 1,
},
[TPS65218_INVALID3_IRQ] = {
},
[TPS65218_INVALID4_IRQ] = {
},
};
static struct regmap_irq_chip tps65218_irq_chip = {
.name = "tps65218",
.irqs = tps65218_irqs,
.num_irqs = ARRAY_SIZE(tps65218_irqs),
.num_regs = 2,
.mask_base = TPS65218_REG_INT_MASK1,
};
static const struct of_device_id of_tps65218_match_table[] = {
{ .compatible = "ti,tps65218", },
};
static int tps65218_probe(struct i2c_client *client,
const struct i2c_device_id *ids)
{
struct tps65218 *tps;
const struct of_device_id *match;
int ret;
match = of_match_device(of_tps65218_match_table, &client->dev);
if (!match) {
dev_err(&client->dev,
"Failed to find matching dt id\n");
return -EINVAL;
}
tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL);
if (!tps)
return -ENOMEM;
i2c_set_clientdata(client, tps);
tps->dev = &client->dev;
tps->irq = client->irq;
tps->regmap = devm_regmap_init_i2c(client, &tps65218_regmap_config);
if (IS_ERR(tps->regmap)) {
ret = PTR_ERR(tps->regmap);
dev_err(tps->dev, "Failed to allocate register map: %d\n",
ret);
return ret;
}
mutex_init(&tps->tps_lock);
ret = regmap_add_irq_chip(tps->regmap, tps->irq,
IRQF_ONESHOT, 0, &tps65218_irq_chip,
&tps->irq_data);
if (ret < 0)
return ret;
ret = of_platform_populate(client->dev.of_node, NULL, NULL,
&client->dev);
if (ret < 0)
goto err_irq;
return 0;
err_irq:
regmap_del_irq_chip(tps->irq, tps->irq_data);
return ret;
}
static int tps65218_remove(struct i2c_client *client)
{
struct tps65218 *tps = i2c_get_clientdata(client);
regmap_del_irq_chip(tps->irq, tps->irq_data);
return 0;
}
static const struct i2c_device_id tps65218_id_table[] = {
{ "tps65218", TPS65218 },
{ },
};
MODULE_DEVICE_TABLE(i2c, tps65218_id_table);
static struct i2c_driver tps65218_driver = {
.driver = {
.name = "tps65218",
.owner = THIS_MODULE,
.of_match_table = of_tps65218_match_table,
},
.probe = tps65218_probe,
.remove = tps65218_remove,
.id_table = tps65218_id_table,
};
module_i2c_driver(tps65218_driver);
MODULE_AUTHOR("J Keerthy <j-keerthy@ti.com>");
MODULE_DESCRIPTION("TPS65218 chip family multi-function driver");
MODULE_LICENSE("GPL v2");

View File

@ -255,8 +255,10 @@ static int tps65910_irq_init(struct tps65910 *tps65910, int irq,
ret = regmap_add_irq_chip(tps65910->regmap, tps65910->chip_irq,
IRQF_ONESHOT, pdata->irq_base,
tps6591x_irqs_chip, &tps65910->irq_data);
if (ret < 0)
if (ret < 0) {
dev_warn(tps65910->dev, "Failed to add irq_chip %d\n", ret);
tps65910->chip_irq = 0;
}
return ret;
}
@ -509,6 +511,7 @@ static int tps65910_i2c_probe(struct i2c_client *i2c,
regmap_irq_get_domain(tps65910->irq_data));
if (ret < 0) {
dev_err(&i2c->dev, "mfd_add_devices failed: %d\n", ret);
tps65910_irq_exit(tps65910);
return ret;
}

View File

@ -15,7 +15,6 @@
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/gpio.h>
#include <linux/mfd/core.h>

View File

@ -15,7 +15,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/bug.h>
#include <linux/device.h>
#include <linux/interrupt.h>

View File

@ -282,11 +282,11 @@ static struct reg_default twl4030_49_defaults[] = {
static bool twl4030_49_nop_reg(struct device *dev, unsigned int reg)
{
switch (reg) {
case 0:
case 3:
case 40:
case 41:
case 42:
case 0x00:
case 0x03:
case 0x40:
case 0x41:
case 0x42:
return false;
default:
return true;

View File

@ -27,7 +27,6 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/init.h>
#include <linux/export.h>
#include <linux/interrupt.h>
#include <linux/irq.h>

View File

@ -31,7 +31,6 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/init.h>
#include <linux/export.h>
#include <linux/interrupt.h>
#include <linux/irq.h>

View File

@ -661,6 +661,11 @@ static int twl6040_probe(struct i2c_client *client,
init_completion(&twl6040->ready);
twl6040->rev = twl6040_reg_read(twl6040, TWL6040_REG_ASICREV);
if (twl6040->rev < 0) {
dev_err(&client->dev, "Failed to read revision register: %d\n",
twl6040->rev);
goto gpio_err;
}
/* ERRATA: Automatic power-up is not possible in ES1.0 */
if (twl6040_get_revid(twl6040) > TWL6040_REV_ES1_0)
@ -703,7 +708,6 @@ static int twl6040_probe(struct i2c_client *client,
}
/* dual-access registers controlled by I2C only */
twl6040_set_bits(twl6040, TWL6040_REG_ACCCTL, TWL6040_I2CSEL);
regmap_register_patch(twl6040->regmap, twl6040_patch,
ARRAY_SIZE(twl6040_patch));

View File

@ -742,9 +742,7 @@ static int ucb1x00_resume(struct device *dev)
}
#endif
static const struct dev_pm_ops ucb1x00_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(ucb1x00_suspend, ucb1x00_resume)
};
static SIMPLE_DEV_PM_OPS(ucb1x00_pm_ops, ucb1x00_suspend, ucb1x00_resume);
static struct mcp_driver ucb1x00_driver = {
.drv = {

View File

@ -16,7 +16,6 @@
#include <linux/bitops.h>
#include <linux/completion.h>
#include <linux/export.h>
#include <linux/init.h>
#include <linux/list.h>
#include <linux/of.h>
#include <linux/of_device.h>
@ -27,7 +26,7 @@
#define VEXPRESS_CONFIG_MAX_BRIDGES 2
struct vexpress_config_bridge {
static struct vexpress_config_bridge {
struct device_node *node;
struct vexpress_config_bridge_info *info;
struct list_head transactions;

View File

@ -168,7 +168,7 @@ static void *vexpress_sysreg_config_func_get(struct device *dev,
struct device_node *node)
{
struct vexpress_sysreg_config_func *config_func;
u32 site;
u32 site = 0;
u32 position = 0;
u32 dcc = 0;
u32 func_device[2];

View File

@ -73,6 +73,7 @@ static const struct reg_default wm5102_revb_patch[] = {
{ 0x171, 0x0000 },
{ 0x35E, 0x000C },
{ 0x2D4, 0x0000 },
{ 0x4DC, 0x0900 },
{ 0x80, 0x0000 },
};
@ -1839,6 +1840,23 @@ static bool wm5102_readable_register(struct device *dev, unsigned int reg)
case ARIZONA_DSP1_STATUS_1:
case ARIZONA_DSP1_STATUS_2:
case ARIZONA_DSP1_STATUS_3:
case ARIZONA_DSP1_WDMA_BUFFER_1:
case ARIZONA_DSP1_WDMA_BUFFER_2:
case ARIZONA_DSP1_WDMA_BUFFER_3:
case ARIZONA_DSP1_WDMA_BUFFER_4:
case ARIZONA_DSP1_WDMA_BUFFER_5:
case ARIZONA_DSP1_WDMA_BUFFER_6:
case ARIZONA_DSP1_WDMA_BUFFER_7:
case ARIZONA_DSP1_WDMA_BUFFER_8:
case ARIZONA_DSP1_RDMA_BUFFER_1:
case ARIZONA_DSP1_RDMA_BUFFER_2:
case ARIZONA_DSP1_RDMA_BUFFER_3:
case ARIZONA_DSP1_RDMA_BUFFER_4:
case ARIZONA_DSP1_RDMA_BUFFER_5:
case ARIZONA_DSP1_RDMA_BUFFER_6:
case ARIZONA_DSP1_WDMA_CONFIG_1:
case ARIZONA_DSP1_WDMA_CONFIG_2:
case ARIZONA_DSP1_RDMA_CONFIG_1:
case ARIZONA_DSP1_SCRATCH_0:
case ARIZONA_DSP1_SCRATCH_1:
case ARIZONA_DSP1_SCRATCH_2:
@ -1894,9 +1912,27 @@ static bool wm5102_volatile_register(struct device *dev, unsigned int reg)
case ARIZONA_AOD_IRQ1:
case ARIZONA_AOD_IRQ2:
case ARIZONA_AOD_IRQ_RAW_STATUS:
case ARIZONA_DSP1_CLOCKING_1:
case ARIZONA_DSP1_STATUS_1:
case ARIZONA_DSP1_STATUS_2:
case ARIZONA_DSP1_STATUS_3:
case ARIZONA_DSP1_WDMA_BUFFER_1:
case ARIZONA_DSP1_WDMA_BUFFER_2:
case ARIZONA_DSP1_WDMA_BUFFER_3:
case ARIZONA_DSP1_WDMA_BUFFER_4:
case ARIZONA_DSP1_WDMA_BUFFER_5:
case ARIZONA_DSP1_WDMA_BUFFER_6:
case ARIZONA_DSP1_WDMA_BUFFER_7:
case ARIZONA_DSP1_WDMA_BUFFER_8:
case ARIZONA_DSP1_RDMA_BUFFER_1:
case ARIZONA_DSP1_RDMA_BUFFER_2:
case ARIZONA_DSP1_RDMA_BUFFER_3:
case ARIZONA_DSP1_RDMA_BUFFER_4:
case ARIZONA_DSP1_RDMA_BUFFER_5:
case ARIZONA_DSP1_RDMA_BUFFER_6:
case ARIZONA_DSP1_WDMA_CONFIG_1:
case ARIZONA_DSP1_WDMA_CONFIG_2:
case ARIZONA_DSP1_RDMA_CONFIG_1:
case ARIZONA_DSP1_SCRATCH_0:
case ARIZONA_DSP1_SCRATCH_1:
case ARIZONA_DSP1_SCRATCH_2:

View File

@ -538,7 +538,7 @@ static const struct reg_default wm5110_reg_default[] = {
{ 0x00000219, 0x01A6 }, /* R537 - Mic Bias Ctrl 2 */
{ 0x0000021A, 0x01A6 }, /* R538 - Mic Bias Ctrl 3 */
{ 0x00000293, 0x0000 }, /* R659 - Accessory Detect Mode 1 */
{ 0x0000029B, 0x0020 }, /* R667 - Headphone Detect 1 */
{ 0x0000029B, 0x0028 }, /* R667 - Headphone Detect 1 */
{ 0x0000029C, 0x0000 }, /* R668 - Headphone Detect 2 */
{ 0x000002A2, 0x0000 }, /* R674 - Micd clamp control */
{ 0x000002A3, 0x1102 }, /* R675 - Mic Detect 1 */
@ -2461,6 +2461,27 @@ static bool wm5110_readable_register(struct device *dev, unsigned int reg)
case ARIZONA_DSP1_STATUS_1:
case ARIZONA_DSP1_STATUS_2:
case ARIZONA_DSP1_STATUS_3:
case ARIZONA_DSP1_STATUS_4:
case ARIZONA_DSP1_WDMA_BUFFER_1:
case ARIZONA_DSP1_WDMA_BUFFER_2:
case ARIZONA_DSP1_WDMA_BUFFER_3:
case ARIZONA_DSP1_WDMA_BUFFER_4:
case ARIZONA_DSP1_WDMA_BUFFER_5:
case ARIZONA_DSP1_WDMA_BUFFER_6:
case ARIZONA_DSP1_WDMA_BUFFER_7:
case ARIZONA_DSP1_WDMA_BUFFER_8:
case ARIZONA_DSP1_RDMA_BUFFER_1:
case ARIZONA_DSP1_RDMA_BUFFER_2:
case ARIZONA_DSP1_RDMA_BUFFER_3:
case ARIZONA_DSP1_RDMA_BUFFER_4:
case ARIZONA_DSP1_RDMA_BUFFER_5:
case ARIZONA_DSP1_RDMA_BUFFER_6:
case ARIZONA_DSP1_WDMA_CONFIG_1:
case ARIZONA_DSP1_WDMA_CONFIG_2:
case ARIZONA_DSP1_WDMA_OFFSET_1:
case ARIZONA_DSP1_RDMA_CONFIG_1:
case ARIZONA_DSP1_RDMA_OFFSET_1:
case ARIZONA_DSP1_EXTERNAL_START_SELECT_1:
case ARIZONA_DSP1_SCRATCH_0:
case ARIZONA_DSP1_SCRATCH_1:
case ARIZONA_DSP1_SCRATCH_2:
@ -2470,6 +2491,27 @@ static bool wm5110_readable_register(struct device *dev, unsigned int reg)
case ARIZONA_DSP2_STATUS_1:
case ARIZONA_DSP2_STATUS_2:
case ARIZONA_DSP2_STATUS_3:
case ARIZONA_DSP2_STATUS_4:
case ARIZONA_DSP2_WDMA_BUFFER_1:
case ARIZONA_DSP2_WDMA_BUFFER_2:
case ARIZONA_DSP2_WDMA_BUFFER_3:
case ARIZONA_DSP2_WDMA_BUFFER_4:
case ARIZONA_DSP2_WDMA_BUFFER_5:
case ARIZONA_DSP2_WDMA_BUFFER_6:
case ARIZONA_DSP2_WDMA_BUFFER_7:
case ARIZONA_DSP2_WDMA_BUFFER_8:
case ARIZONA_DSP2_RDMA_BUFFER_1:
case ARIZONA_DSP2_RDMA_BUFFER_2:
case ARIZONA_DSP2_RDMA_BUFFER_3:
case ARIZONA_DSP2_RDMA_BUFFER_4:
case ARIZONA_DSP2_RDMA_BUFFER_5:
case ARIZONA_DSP2_RDMA_BUFFER_6:
case ARIZONA_DSP2_WDMA_CONFIG_1:
case ARIZONA_DSP2_WDMA_CONFIG_2:
case ARIZONA_DSP2_WDMA_OFFSET_1:
case ARIZONA_DSP2_RDMA_CONFIG_1:
case ARIZONA_DSP2_RDMA_OFFSET_1:
case ARIZONA_DSP2_EXTERNAL_START_SELECT_1:
case ARIZONA_DSP2_SCRATCH_0:
case ARIZONA_DSP2_SCRATCH_1:
case ARIZONA_DSP2_SCRATCH_2:
@ -2479,6 +2521,27 @@ static bool wm5110_readable_register(struct device *dev, unsigned int reg)
case ARIZONA_DSP3_STATUS_1:
case ARIZONA_DSP3_STATUS_2:
case ARIZONA_DSP3_STATUS_3:
case ARIZONA_DSP3_STATUS_4:
case ARIZONA_DSP3_WDMA_BUFFER_1:
case ARIZONA_DSP3_WDMA_BUFFER_2:
case ARIZONA_DSP3_WDMA_BUFFER_3:
case ARIZONA_DSP3_WDMA_BUFFER_4:
case ARIZONA_DSP3_WDMA_BUFFER_5:
case ARIZONA_DSP3_WDMA_BUFFER_6:
case ARIZONA_DSP3_WDMA_BUFFER_7:
case ARIZONA_DSP3_WDMA_BUFFER_8:
case ARIZONA_DSP3_RDMA_BUFFER_1:
case ARIZONA_DSP3_RDMA_BUFFER_2:
case ARIZONA_DSP3_RDMA_BUFFER_3:
case ARIZONA_DSP3_RDMA_BUFFER_4:
case ARIZONA_DSP3_RDMA_BUFFER_5:
case ARIZONA_DSP3_RDMA_BUFFER_6:
case ARIZONA_DSP3_WDMA_CONFIG_1:
case ARIZONA_DSP3_WDMA_CONFIG_2:
case ARIZONA_DSP3_WDMA_OFFSET_1:
case ARIZONA_DSP3_RDMA_CONFIG_1:
case ARIZONA_DSP3_RDMA_OFFSET_1:
case ARIZONA_DSP3_EXTERNAL_START_SELECT_1:
case ARIZONA_DSP3_SCRATCH_0:
case ARIZONA_DSP3_SCRATCH_1:
case ARIZONA_DSP3_SCRATCH_2:
@ -2488,6 +2551,27 @@ static bool wm5110_readable_register(struct device *dev, unsigned int reg)
case ARIZONA_DSP4_STATUS_1:
case ARIZONA_DSP4_STATUS_2:
case ARIZONA_DSP4_STATUS_3:
case ARIZONA_DSP4_STATUS_4:
case ARIZONA_DSP4_WDMA_BUFFER_1:
case ARIZONA_DSP4_WDMA_BUFFER_2:
case ARIZONA_DSP4_WDMA_BUFFER_3:
case ARIZONA_DSP4_WDMA_BUFFER_4:
case ARIZONA_DSP4_WDMA_BUFFER_5:
case ARIZONA_DSP4_WDMA_BUFFER_6:
case ARIZONA_DSP4_WDMA_BUFFER_7:
case ARIZONA_DSP4_WDMA_BUFFER_8:
case ARIZONA_DSP4_RDMA_BUFFER_1:
case ARIZONA_DSP4_RDMA_BUFFER_2:
case ARIZONA_DSP4_RDMA_BUFFER_3:
case ARIZONA_DSP4_RDMA_BUFFER_4:
case ARIZONA_DSP4_RDMA_BUFFER_5:
case ARIZONA_DSP4_RDMA_BUFFER_6:
case ARIZONA_DSP4_WDMA_CONFIG_1:
case ARIZONA_DSP4_WDMA_CONFIG_2:
case ARIZONA_DSP4_WDMA_OFFSET_1:
case ARIZONA_DSP4_RDMA_CONFIG_1:
case ARIZONA_DSP4_RDMA_OFFSET_1:
case ARIZONA_DSP4_EXTERNAL_START_SELECT_1:
case ARIZONA_DSP4_SCRATCH_0:
case ARIZONA_DSP4_SCRATCH_1:
case ARIZONA_DSP4_SCRATCH_2:
@ -2543,31 +2627,119 @@ static bool wm5110_volatile_register(struct device *dev, unsigned int reg)
case ARIZONA_DSP1_STATUS_1:
case ARIZONA_DSP1_STATUS_2:
case ARIZONA_DSP1_STATUS_3:
case ARIZONA_DSP1_STATUS_4:
case ARIZONA_DSP1_WDMA_BUFFER_1:
case ARIZONA_DSP1_WDMA_BUFFER_2:
case ARIZONA_DSP1_WDMA_BUFFER_3:
case ARIZONA_DSP1_WDMA_BUFFER_4:
case ARIZONA_DSP1_WDMA_BUFFER_5:
case ARIZONA_DSP1_WDMA_BUFFER_6:
case ARIZONA_DSP1_WDMA_BUFFER_7:
case ARIZONA_DSP1_WDMA_BUFFER_8:
case ARIZONA_DSP1_RDMA_BUFFER_1:
case ARIZONA_DSP1_RDMA_BUFFER_2:
case ARIZONA_DSP1_RDMA_BUFFER_3:
case ARIZONA_DSP1_RDMA_BUFFER_4:
case ARIZONA_DSP1_RDMA_BUFFER_5:
case ARIZONA_DSP1_RDMA_BUFFER_6:
case ARIZONA_DSP1_WDMA_CONFIG_1:
case ARIZONA_DSP1_WDMA_CONFIG_2:
case ARIZONA_DSP1_WDMA_OFFSET_1:
case ARIZONA_DSP1_RDMA_CONFIG_1:
case ARIZONA_DSP1_RDMA_OFFSET_1:
case ARIZONA_DSP1_EXTERNAL_START_SELECT_1:
case ARIZONA_DSP1_SCRATCH_0:
case ARIZONA_DSP1_SCRATCH_1:
case ARIZONA_DSP1_SCRATCH_2:
case ARIZONA_DSP1_SCRATCH_3:
case ARIZONA_DSP1_CLOCKING_1:
case ARIZONA_DSP2_STATUS_1:
case ARIZONA_DSP2_STATUS_2:
case ARIZONA_DSP2_STATUS_3:
case ARIZONA_DSP2_STATUS_4:
case ARIZONA_DSP2_WDMA_BUFFER_1:
case ARIZONA_DSP2_WDMA_BUFFER_2:
case ARIZONA_DSP2_WDMA_BUFFER_3:
case ARIZONA_DSP2_WDMA_BUFFER_4:
case ARIZONA_DSP2_WDMA_BUFFER_5:
case ARIZONA_DSP2_WDMA_BUFFER_6:
case ARIZONA_DSP2_WDMA_BUFFER_7:
case ARIZONA_DSP2_WDMA_BUFFER_8:
case ARIZONA_DSP2_RDMA_BUFFER_1:
case ARIZONA_DSP2_RDMA_BUFFER_2:
case ARIZONA_DSP2_RDMA_BUFFER_3:
case ARIZONA_DSP2_RDMA_BUFFER_4:
case ARIZONA_DSP2_RDMA_BUFFER_5:
case ARIZONA_DSP2_RDMA_BUFFER_6:
case ARIZONA_DSP2_WDMA_CONFIG_1:
case ARIZONA_DSP2_WDMA_CONFIG_2:
case ARIZONA_DSP2_WDMA_OFFSET_1:
case ARIZONA_DSP2_RDMA_CONFIG_1:
case ARIZONA_DSP2_RDMA_OFFSET_1:
case ARIZONA_DSP2_EXTERNAL_START_SELECT_1:
case ARIZONA_DSP2_SCRATCH_0:
case ARIZONA_DSP2_SCRATCH_1:
case ARIZONA_DSP2_SCRATCH_2:
case ARIZONA_DSP2_SCRATCH_3:
case ARIZONA_DSP2_CLOCKING_1:
case ARIZONA_DSP3_STATUS_1:
case ARIZONA_DSP3_STATUS_2:
case ARIZONA_DSP3_STATUS_3:
case ARIZONA_DSP3_STATUS_4:
case ARIZONA_DSP3_WDMA_BUFFER_1:
case ARIZONA_DSP3_WDMA_BUFFER_2:
case ARIZONA_DSP3_WDMA_BUFFER_3:
case ARIZONA_DSP3_WDMA_BUFFER_4:
case ARIZONA_DSP3_WDMA_BUFFER_5:
case ARIZONA_DSP3_WDMA_BUFFER_6:
case ARIZONA_DSP3_WDMA_BUFFER_7:
case ARIZONA_DSP3_WDMA_BUFFER_8:
case ARIZONA_DSP3_RDMA_BUFFER_1:
case ARIZONA_DSP3_RDMA_BUFFER_2:
case ARIZONA_DSP3_RDMA_BUFFER_3:
case ARIZONA_DSP3_RDMA_BUFFER_4:
case ARIZONA_DSP3_RDMA_BUFFER_5:
case ARIZONA_DSP3_RDMA_BUFFER_6:
case ARIZONA_DSP3_WDMA_CONFIG_1:
case ARIZONA_DSP3_WDMA_CONFIG_2:
case ARIZONA_DSP3_WDMA_OFFSET_1:
case ARIZONA_DSP3_RDMA_CONFIG_1:
case ARIZONA_DSP3_RDMA_OFFSET_1:
case ARIZONA_DSP3_EXTERNAL_START_SELECT_1:
case ARIZONA_DSP3_SCRATCH_0:
case ARIZONA_DSP3_SCRATCH_1:
case ARIZONA_DSP3_SCRATCH_2:
case ARIZONA_DSP3_SCRATCH_3:
case ARIZONA_DSP3_CLOCKING_1:
case ARIZONA_DSP4_STATUS_1:
case ARIZONA_DSP4_STATUS_2:
case ARIZONA_DSP4_STATUS_3:
case ARIZONA_DSP4_STATUS_4:
case ARIZONA_DSP4_WDMA_BUFFER_1:
case ARIZONA_DSP4_WDMA_BUFFER_2:
case ARIZONA_DSP4_WDMA_BUFFER_3:
case ARIZONA_DSP4_WDMA_BUFFER_4:
case ARIZONA_DSP4_WDMA_BUFFER_5:
case ARIZONA_DSP4_WDMA_BUFFER_6:
case ARIZONA_DSP4_WDMA_BUFFER_7:
case ARIZONA_DSP4_WDMA_BUFFER_8:
case ARIZONA_DSP4_RDMA_BUFFER_1:
case ARIZONA_DSP4_RDMA_BUFFER_2:
case ARIZONA_DSP4_RDMA_BUFFER_3:
case ARIZONA_DSP4_RDMA_BUFFER_4:
case ARIZONA_DSP4_RDMA_BUFFER_5:
case ARIZONA_DSP4_RDMA_BUFFER_6:
case ARIZONA_DSP4_WDMA_CONFIG_1:
case ARIZONA_DSP4_WDMA_CONFIG_2:
case ARIZONA_DSP4_WDMA_OFFSET_1:
case ARIZONA_DSP4_RDMA_CONFIG_1:
case ARIZONA_DSP4_RDMA_OFFSET_1:
case ARIZONA_DSP4_EXTERNAL_START_SELECT_1:
case ARIZONA_DSP4_SCRATCH_0:
case ARIZONA_DSP4_SCRATCH_1:
case ARIZONA_DSP4_SCRATCH_2:
case ARIZONA_DSP4_SCRATCH_3:
case ARIZONA_DSP4_CLOCKING_1:
return true;
default:
return wm5110_is_adsp_memory(dev, reg);

View File

@ -14,7 +14,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/bug.h>
#include <linux/device.h>

View File

@ -14,7 +14,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/bug.h>
#include <linux/device.h>
#include <linux/interrupt.h>

View File

@ -161,31 +161,19 @@ static int wm8400_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct wm8400 *wm8400;
int ret;
wm8400 = devm_kzalloc(&i2c->dev, sizeof(struct wm8400), GFP_KERNEL);
if (wm8400 == NULL) {
ret = -ENOMEM;
goto err;
}
if (!wm8400)
return -ENOMEM;
wm8400->regmap = devm_regmap_init_i2c(i2c, &wm8400_regmap_config);
if (IS_ERR(wm8400->regmap)) {
ret = PTR_ERR(wm8400->regmap);
goto err;
}
if (IS_ERR(wm8400->regmap))
return PTR_ERR(wm8400->regmap);
wm8400->dev = &i2c->dev;
i2c_set_clientdata(i2c, wm8400);
ret = wm8400_init(wm8400, dev_get_platdata(&i2c->dev));
if (ret != 0)
goto err;
return 0;
err:
return ret;
return wm8400_init(wm8400, dev_get_platdata(&i2c->dev));
}
static int wm8400_i2c_remove(struct i2c_client *i2c)

View File

@ -48,7 +48,7 @@
/* Module and version information */
#define DRV_NAME "iTCO_wdt"
#define DRV_VERSION "1.10"
#define DRV_VERSION "1.11"
/* Includes */
#include <linux/module.h> /* For module specific items */
@ -92,9 +92,12 @@ static struct { /* this is private data for the iTCO_wdt device */
unsigned int iTCO_version;
struct resource *tco_res;
struct resource *smi_res;
struct resource *gcs_res;
/* NO_REBOOT flag is Memory-Mapped GCS register bit 5 (TCO version 2)*/
unsigned long __iomem *gcs;
/*
* NO_REBOOT flag is Memory-Mapped GCS register bit 5 (TCO version 2),
* or memory-mapped PMC register bit 4 (TCO version 3).
*/
struct resource *gcs_pmc_res;
unsigned long __iomem *gcs_pmc;
/* the lock for io operations */
spinlock_t io_lock;
struct platform_device *dev;
@ -125,11 +128,19 @@ MODULE_PARM_DESC(turn_SMI_watchdog_clear_off,
* Some TCO specific functions
*/
static inline unsigned int seconds_to_ticks(int seconds)
/*
* The iTCO v1 and v2's internal timer is stored as ticks which decrement
* every 0.6 seconds. v3's internal timer is stored as seconds (some
* datasheets incorrectly state 0.6 seconds).
*/
static inline unsigned int seconds_to_ticks(int secs)
{
/* the internal timer is stored as ticks which decrement
* every 0.6 seconds */
return (seconds * 10) / 6;
return iTCO_wdt_private.iTCO_version == 3 ? secs : (secs * 10) / 6;
}
static inline unsigned int ticks_to_seconds(int ticks)
{
return iTCO_wdt_private.iTCO_version == 3 ? ticks : (ticks * 6) / 10;
}
static void iTCO_wdt_set_NO_REBOOT_bit(void)
@ -137,10 +148,14 @@ static void iTCO_wdt_set_NO_REBOOT_bit(void)
u32 val32;
/* Set the NO_REBOOT bit: this disables reboots */
if (iTCO_wdt_private.iTCO_version == 2) {
val32 = readl(iTCO_wdt_private.gcs);
if (iTCO_wdt_private.iTCO_version == 3) {
val32 = readl(iTCO_wdt_private.gcs_pmc);
val32 |= 0x00000010;
writel(val32, iTCO_wdt_private.gcs_pmc);
} else if (iTCO_wdt_private.iTCO_version == 2) {
val32 = readl(iTCO_wdt_private.gcs_pmc);
val32 |= 0x00000020;
writel(val32, iTCO_wdt_private.gcs);
writel(val32, iTCO_wdt_private.gcs_pmc);
} else if (iTCO_wdt_private.iTCO_version == 1) {
pci_read_config_dword(iTCO_wdt_private.pdev, 0xd4, &val32);
val32 |= 0x00000002;
@ -154,12 +169,20 @@ static int iTCO_wdt_unset_NO_REBOOT_bit(void)
u32 val32;
/* Unset the NO_REBOOT bit: this enables reboots */
if (iTCO_wdt_private.iTCO_version == 2) {
val32 = readl(iTCO_wdt_private.gcs);
val32 &= 0xffffffdf;
writel(val32, iTCO_wdt_private.gcs);
if (iTCO_wdt_private.iTCO_version == 3) {
val32 = readl(iTCO_wdt_private.gcs_pmc);
val32 &= 0xffffffef;
writel(val32, iTCO_wdt_private.gcs_pmc);
val32 = readl(iTCO_wdt_private.gcs);
val32 = readl(iTCO_wdt_private.gcs_pmc);
if (val32 & 0x00000010)
ret = -EIO;
} else if (iTCO_wdt_private.iTCO_version == 2) {
val32 = readl(iTCO_wdt_private.gcs_pmc);
val32 &= 0xffffffdf;
writel(val32, iTCO_wdt_private.gcs_pmc);
val32 = readl(iTCO_wdt_private.gcs_pmc);
if (val32 & 0x00000020)
ret = -EIO;
} else if (iTCO_wdt_private.iTCO_version == 1) {
@ -192,7 +215,7 @@ static int iTCO_wdt_start(struct watchdog_device *wd_dev)
/* Force the timer to its reload value by writing to the TCO_RLD
register */
if (iTCO_wdt_private.iTCO_version == 2)
if (iTCO_wdt_private.iTCO_version >= 2)
outw(0x01, TCO_RLD);
else if (iTCO_wdt_private.iTCO_version == 1)
outb(0x01, TCO_RLD);
@ -240,9 +263,9 @@ static int iTCO_wdt_ping(struct watchdog_device *wd_dev)
iTCO_vendor_pre_keepalive(iTCO_wdt_private.smi_res, wd_dev->timeout);
/* Reload the timer by writing to the TCO Timer Counter register */
if (iTCO_wdt_private.iTCO_version == 2)
if (iTCO_wdt_private.iTCO_version >= 2) {
outw(0x01, TCO_RLD);
else if (iTCO_wdt_private.iTCO_version == 1) {
} else if (iTCO_wdt_private.iTCO_version == 1) {
/* Reset the timeout status bit so that the timer
* needs to count down twice again before rebooting */
outw(0x0008, TCO1_STS); /* write 1 to clear bit */
@ -270,14 +293,14 @@ static int iTCO_wdt_set_timeout(struct watchdog_device *wd_dev, unsigned int t)
/* "Values of 0h-3h are ignored and should not be attempted" */
if (tmrval < 0x04)
return -EINVAL;
if (((iTCO_wdt_private.iTCO_version == 2) && (tmrval > 0x3ff)) ||
if (((iTCO_wdt_private.iTCO_version >= 2) && (tmrval > 0x3ff)) ||
((iTCO_wdt_private.iTCO_version == 1) && (tmrval > 0x03f)))
return -EINVAL;
iTCO_vendor_pre_set_heartbeat(tmrval);
/* Write new heartbeat to watchdog */
if (iTCO_wdt_private.iTCO_version == 2) {
if (iTCO_wdt_private.iTCO_version >= 2) {
spin_lock(&iTCO_wdt_private.io_lock);
val16 = inw(TCOv2_TMR);
val16 &= 0xfc00;
@ -312,13 +335,13 @@ static unsigned int iTCO_wdt_get_timeleft(struct watchdog_device *wd_dev)
unsigned int time_left = 0;
/* read the TCO Timer */
if (iTCO_wdt_private.iTCO_version == 2) {
if (iTCO_wdt_private.iTCO_version >= 2) {
spin_lock(&iTCO_wdt_private.io_lock);
val16 = inw(TCO_RLD);
val16 &= 0x3ff;
spin_unlock(&iTCO_wdt_private.io_lock);
time_left = (val16 * 6) / 10;
time_left = ticks_to_seconds(val16);
} else if (iTCO_wdt_private.iTCO_version == 1) {
spin_lock(&iTCO_wdt_private.io_lock);
val8 = inb(TCO_RLD);
@ -327,7 +350,7 @@ static unsigned int iTCO_wdt_get_timeleft(struct watchdog_device *wd_dev)
val8 += (inb(TCOv1_TMR) & 0x3f);
spin_unlock(&iTCO_wdt_private.io_lock);
time_left = (val8 * 6) / 10;
time_left = ticks_to_seconds(val8);
}
return time_left;
}
@ -376,16 +399,16 @@ static void iTCO_wdt_cleanup(void)
resource_size(iTCO_wdt_private.tco_res));
release_region(iTCO_wdt_private.smi_res->start,
resource_size(iTCO_wdt_private.smi_res));
if (iTCO_wdt_private.iTCO_version == 2) {
iounmap(iTCO_wdt_private.gcs);
release_mem_region(iTCO_wdt_private.gcs_res->start,
resource_size(iTCO_wdt_private.gcs_res));
if (iTCO_wdt_private.iTCO_version >= 2) {
iounmap(iTCO_wdt_private.gcs_pmc);
release_mem_region(iTCO_wdt_private.gcs_pmc_res->start,
resource_size(iTCO_wdt_private.gcs_pmc_res));
}
iTCO_wdt_private.tco_res = NULL;
iTCO_wdt_private.smi_res = NULL;
iTCO_wdt_private.gcs_res = NULL;
iTCO_wdt_private.gcs = NULL;
iTCO_wdt_private.gcs_pmc_res = NULL;
iTCO_wdt_private.gcs_pmc = NULL;
}
static int iTCO_wdt_probe(struct platform_device *dev)
@ -414,27 +437,27 @@ static int iTCO_wdt_probe(struct platform_device *dev)
iTCO_wdt_private.pdev = to_pci_dev(dev->dev.parent);
/*
* Get the Memory-Mapped GCS register, we need it for the
* NO_REBOOT flag (TCO v2).
* Get the Memory-Mapped GCS or PMC register, we need it for the
* NO_REBOOT flag (TCO v2 and v3).
*/
if (iTCO_wdt_private.iTCO_version == 2) {
iTCO_wdt_private.gcs_res = platform_get_resource(dev,
if (iTCO_wdt_private.iTCO_version >= 2) {
iTCO_wdt_private.gcs_pmc_res = platform_get_resource(dev,
IORESOURCE_MEM,
ICH_RES_MEM_GCS);
ICH_RES_MEM_GCS_PMC);
if (!iTCO_wdt_private.gcs_res)
if (!iTCO_wdt_private.gcs_pmc_res)
goto out;
if (!request_mem_region(iTCO_wdt_private.gcs_res->start,
resource_size(iTCO_wdt_private.gcs_res), dev->name)) {
if (!request_mem_region(iTCO_wdt_private.gcs_pmc_res->start,
resource_size(iTCO_wdt_private.gcs_pmc_res), dev->name)) {
ret = -EBUSY;
goto out;
}
iTCO_wdt_private.gcs = ioremap(iTCO_wdt_private.gcs_res->start,
resource_size(iTCO_wdt_private.gcs_res));
if (!iTCO_wdt_private.gcs) {
iTCO_wdt_private.gcs_pmc = ioremap(iTCO_wdt_private.gcs_pmc_res->start,
resource_size(iTCO_wdt_private.gcs_pmc_res));
if (!iTCO_wdt_private.gcs_pmc) {
ret = -EIO;
goto unreg_gcs;
goto unreg_gcs_pmc;
}
}
@ -442,7 +465,7 @@ static int iTCO_wdt_probe(struct platform_device *dev)
if (iTCO_wdt_unset_NO_REBOOT_bit() && iTCO_vendor_check_noreboot_on()) {
pr_info("unable to reset NO_REBOOT flag, device disabled by hardware/BIOS\n");
ret = -ENODEV; /* Cannot reset NO_REBOOT bit */
goto unmap_gcs;
goto unmap_gcs_pmc;
}
/* Set the NO_REBOOT bit to prevent later reboots, just for sure */
@ -454,7 +477,7 @@ static int iTCO_wdt_probe(struct platform_device *dev)
pr_err("I/O address 0x%04llx already in use, device disabled\n",
(u64)SMI_EN);
ret = -EBUSY;
goto unmap_gcs;
goto unmap_gcs_pmc;
}
if (turn_SMI_watchdog_clear_off >= iTCO_wdt_private.iTCO_version) {
/*
@ -478,9 +501,13 @@ static int iTCO_wdt_probe(struct platform_device *dev)
ich_info->name, ich_info->iTCO_version, (u64)TCOBASE);
/* Clear out the (probably old) status */
outw(0x0008, TCO1_STS); /* Clear the Time Out Status bit */
outw(0x0002, TCO2_STS); /* Clear SECOND_TO_STS bit */
outw(0x0004, TCO2_STS); /* Clear BOOT_STS bit */
if (iTCO_wdt_private.iTCO_version == 3) {
outl(0x20008, TCO1_STS);
} else {
outw(0x0008, TCO1_STS); /* Clear the Time Out Status bit */
outw(0x0002, TCO2_STS); /* Clear SECOND_TO_STS bit */
outw(0x0004, TCO2_STS); /* Clear BOOT_STS bit */
}
iTCO_wdt_watchdog_dev.bootstatus = 0;
iTCO_wdt_watchdog_dev.timeout = WATCHDOG_TIMEOUT;
@ -515,18 +542,18 @@ unreg_tco:
unreg_smi:
release_region(iTCO_wdt_private.smi_res->start,
resource_size(iTCO_wdt_private.smi_res));
unmap_gcs:
if (iTCO_wdt_private.iTCO_version == 2)
iounmap(iTCO_wdt_private.gcs);
unreg_gcs:
if (iTCO_wdt_private.iTCO_version == 2)
release_mem_region(iTCO_wdt_private.gcs_res->start,
resource_size(iTCO_wdt_private.gcs_res));
unmap_gcs_pmc:
if (iTCO_wdt_private.iTCO_version >= 2)
iounmap(iTCO_wdt_private.gcs_pmc);
unreg_gcs_pmc:
if (iTCO_wdt_private.iTCO_version >= 2)
release_mem_region(iTCO_wdt_private.gcs_pmc_res->start,
resource_size(iTCO_wdt_private.gcs_pmc_res));
out:
iTCO_wdt_private.tco_res = NULL;
iTCO_wdt_private.smi_res = NULL;
iTCO_wdt_private.gcs_res = NULL;
iTCO_wdt_private.gcs = NULL;
iTCO_wdt_private.gcs_pmc_res = NULL;
iTCO_wdt_private.gcs_pmc = NULL;
return ret;
}

View File

@ -195,6 +195,18 @@ static inline int twl_i2c_read_u8(u8 mod_no, u8 *val, u8 reg) {
return twl_i2c_read(mod_no, val, reg, 1);
}
static inline int twl_i2c_write_u16(u8 mod_no, u16 val, u8 reg) {
val = cpu_to_le16(val);
return twl_i2c_write(mod_no, (u8*) &val, reg, 2);
}
static inline int twl_i2c_read_u16(u8 mod_no, u16 *val, u8 reg) {
int ret;
ret = twl_i2c_read(mod_no, (u8*) val, reg, 2);
*val = le16_to_cpu(*val);
return ret;
}
int twl_get_type(void);
int twl_get_version(void);
int twl_get_hfclk_rate(void);

View File

@ -44,7 +44,7 @@ struct twl4030_madc_conversion_method {
struct twl4030_madc_request {
unsigned long channels;
u16 do_avg;
bool do_avg;
u16 method;
u16 type;
bool active;

View File

@ -1034,6 +1034,27 @@
#define ARIZONA_DSP1_STATUS_1 0x1104
#define ARIZONA_DSP1_STATUS_2 0x1105
#define ARIZONA_DSP1_STATUS_3 0x1106
#define ARIZONA_DSP1_STATUS_4 0x1107
#define ARIZONA_DSP1_WDMA_BUFFER_1 0x1110
#define ARIZONA_DSP1_WDMA_BUFFER_2 0x1111
#define ARIZONA_DSP1_WDMA_BUFFER_3 0x1112
#define ARIZONA_DSP1_WDMA_BUFFER_4 0x1113
#define ARIZONA_DSP1_WDMA_BUFFER_5 0x1114
#define ARIZONA_DSP1_WDMA_BUFFER_6 0x1115
#define ARIZONA_DSP1_WDMA_BUFFER_7 0x1116
#define ARIZONA_DSP1_WDMA_BUFFER_8 0x1117
#define ARIZONA_DSP1_RDMA_BUFFER_1 0x1120
#define ARIZONA_DSP1_RDMA_BUFFER_2 0x1121
#define ARIZONA_DSP1_RDMA_BUFFER_3 0x1122
#define ARIZONA_DSP1_RDMA_BUFFER_4 0x1123
#define ARIZONA_DSP1_RDMA_BUFFER_5 0x1124
#define ARIZONA_DSP1_RDMA_BUFFER_6 0x1125
#define ARIZONA_DSP1_WDMA_CONFIG_1 0x1130
#define ARIZONA_DSP1_WDMA_CONFIG_2 0x1131
#define ARIZONA_DSP1_WDMA_OFFSET_1 0x1132
#define ARIZONA_DSP1_RDMA_CONFIG_1 0x1134
#define ARIZONA_DSP1_RDMA_OFFSET_1 0x1135
#define ARIZONA_DSP1_EXTERNAL_START_SELECT_1 0x1138
#define ARIZONA_DSP1_SCRATCH_0 0x1140
#define ARIZONA_DSP1_SCRATCH_1 0x1141
#define ARIZONA_DSP1_SCRATCH_2 0x1142
@ -1043,6 +1064,27 @@
#define ARIZONA_DSP2_STATUS_1 0x1204
#define ARIZONA_DSP2_STATUS_2 0x1205
#define ARIZONA_DSP2_STATUS_3 0x1206
#define ARIZONA_DSP2_STATUS_4 0x1207
#define ARIZONA_DSP2_WDMA_BUFFER_1 0x1210
#define ARIZONA_DSP2_WDMA_BUFFER_2 0x1211
#define ARIZONA_DSP2_WDMA_BUFFER_3 0x1212
#define ARIZONA_DSP2_WDMA_BUFFER_4 0x1213
#define ARIZONA_DSP2_WDMA_BUFFER_5 0x1214
#define ARIZONA_DSP2_WDMA_BUFFER_6 0x1215
#define ARIZONA_DSP2_WDMA_BUFFER_7 0x1216
#define ARIZONA_DSP2_WDMA_BUFFER_8 0x1217
#define ARIZONA_DSP2_RDMA_BUFFER_1 0x1220
#define ARIZONA_DSP2_RDMA_BUFFER_2 0x1221
#define ARIZONA_DSP2_RDMA_BUFFER_3 0x1222
#define ARIZONA_DSP2_RDMA_BUFFER_4 0x1223
#define ARIZONA_DSP2_RDMA_BUFFER_5 0x1224
#define ARIZONA_DSP2_RDMA_BUFFER_6 0x1225
#define ARIZONA_DSP2_WDMA_CONFIG_1 0x1230
#define ARIZONA_DSP2_WDMA_CONFIG_2 0x1231
#define ARIZONA_DSP2_WDMA_OFFSET_1 0x1232
#define ARIZONA_DSP2_RDMA_CONFIG_1 0x1234
#define ARIZONA_DSP2_RDMA_OFFSET_1 0x1235
#define ARIZONA_DSP2_EXTERNAL_START_SELECT_1 0x1238
#define ARIZONA_DSP2_SCRATCH_0 0x1240
#define ARIZONA_DSP2_SCRATCH_1 0x1241
#define ARIZONA_DSP2_SCRATCH_2 0x1242
@ -1052,6 +1094,27 @@
#define ARIZONA_DSP3_STATUS_1 0x1304
#define ARIZONA_DSP3_STATUS_2 0x1305
#define ARIZONA_DSP3_STATUS_3 0x1306
#define ARIZONA_DSP3_STATUS_4 0x1307
#define ARIZONA_DSP3_WDMA_BUFFER_1 0x1310
#define ARIZONA_DSP3_WDMA_BUFFER_2 0x1311
#define ARIZONA_DSP3_WDMA_BUFFER_3 0x1312
#define ARIZONA_DSP3_WDMA_BUFFER_4 0x1313
#define ARIZONA_DSP3_WDMA_BUFFER_5 0x1314
#define ARIZONA_DSP3_WDMA_BUFFER_6 0x1315
#define ARIZONA_DSP3_WDMA_BUFFER_7 0x1316
#define ARIZONA_DSP3_WDMA_BUFFER_8 0x1317
#define ARIZONA_DSP3_RDMA_BUFFER_1 0x1320
#define ARIZONA_DSP3_RDMA_BUFFER_2 0x1321
#define ARIZONA_DSP3_RDMA_BUFFER_3 0x1322
#define ARIZONA_DSP3_RDMA_BUFFER_4 0x1323
#define ARIZONA_DSP3_RDMA_BUFFER_5 0x1324
#define ARIZONA_DSP3_RDMA_BUFFER_6 0x1325
#define ARIZONA_DSP3_WDMA_CONFIG_1 0x1330
#define ARIZONA_DSP3_WDMA_CONFIG_2 0x1331
#define ARIZONA_DSP3_WDMA_OFFSET_1 0x1332
#define ARIZONA_DSP3_RDMA_CONFIG_1 0x1334
#define ARIZONA_DSP3_RDMA_OFFSET_1 0x1335
#define ARIZONA_DSP3_EXTERNAL_START_SELECT_1 0x1338
#define ARIZONA_DSP3_SCRATCH_0 0x1340
#define ARIZONA_DSP3_SCRATCH_1 0x1341
#define ARIZONA_DSP3_SCRATCH_2 0x1342
@ -1061,6 +1124,27 @@
#define ARIZONA_DSP4_STATUS_1 0x1404
#define ARIZONA_DSP4_STATUS_2 0x1405
#define ARIZONA_DSP4_STATUS_3 0x1406
#define ARIZONA_DSP4_STATUS_4 0x1407
#define ARIZONA_DSP4_WDMA_BUFFER_1 0x1410
#define ARIZONA_DSP4_WDMA_BUFFER_2 0x1411
#define ARIZONA_DSP4_WDMA_BUFFER_3 0x1412
#define ARIZONA_DSP4_WDMA_BUFFER_4 0x1413
#define ARIZONA_DSP4_WDMA_BUFFER_5 0x1414
#define ARIZONA_DSP4_WDMA_BUFFER_6 0x1415
#define ARIZONA_DSP4_WDMA_BUFFER_7 0x1416
#define ARIZONA_DSP4_WDMA_BUFFER_8 0x1417
#define ARIZONA_DSP4_RDMA_BUFFER_1 0x1420
#define ARIZONA_DSP4_RDMA_BUFFER_2 0x1421
#define ARIZONA_DSP4_RDMA_BUFFER_3 0x1422
#define ARIZONA_DSP4_RDMA_BUFFER_4 0x1423
#define ARIZONA_DSP4_RDMA_BUFFER_5 0x1424
#define ARIZONA_DSP4_RDMA_BUFFER_6 0x1425
#define ARIZONA_DSP4_WDMA_CONFIG_1 0x1430
#define ARIZONA_DSP4_WDMA_CONFIG_2 0x1431
#define ARIZONA_DSP4_WDMA_OFFSET_1 0x1432
#define ARIZONA_DSP4_RDMA_CONFIG_1 0x1434
#define ARIZONA_DSP4_RDMA_OFFSET_1 0x1435
#define ARIZONA_DSP4_EXTERNAL_START_SELECT_1 0x1438
#define ARIZONA_DSP4_SCRATCH_0 0x1440
#define ARIZONA_DSP4_SCRATCH_1 0x1441
#define ARIZONA_DSP4_SCRATCH_2 0x1442

View File

@ -0,0 +1,31 @@
/*
* Broadcom BCM590xx PMU
*
* Copyright 2014 Linaro Limited
* Author: Matt Porter <mporter@linaro.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#ifndef __LINUX_MFD_BCM590XX_H
#define __LINUX_MFD_BCM590XX_H
#include <linux/device.h>
#include <linux/i2c.h>
#include <linux/regmap.h>
/* max register address */
#define BCM590XX_MAX_REGISTER 0xe7
struct bcm590xx {
struct device *dev;
struct i2c_client *i2c_client;
struct regmap *regmap;
unsigned int id;
};
#endif /* __LINUX_MFD_BCM590XX_H */

View File

@ -83,6 +83,7 @@ enum da9052_chip_id {
DA9053_AA,
DA9053_BA,
DA9053_BB,
DA9053_BC,
};
struct da9052_pdata;

View File

@ -33,6 +33,10 @@ enum da9063_models {
PMIC_DA9063 = 0x61,
};
enum da9063_variant_codes {
PMIC_DA9063_BB = 0x5
};
/* Interrupts */
enum da9063_irqs {
DA9063_IRQ_ONKEY = 0,
@ -72,7 +76,7 @@ struct da9063 {
/* Device */
struct device *dev;
unsigned short model;
unsigned short revision;
unsigned char variant_code;
unsigned int flags;
/* Control interface */

View File

@ -17,11 +17,7 @@
#define _DA9063_REG_H
#define DA9063_I2C_PAGE_SEL_SHIFT 1
#define DA9063_EVENT_REG_NUM 4
#define DA9210_EVENT_REG_NUM 2
#define DA9063_EXT_EVENT_REG_NUM (DA9063_EVENT_REG_NUM + \
DA9210_EVENT_REG_NUM)
/* Page selection I2C or SPI always in the begining of any page. */
/* Page 0 : I2C access 0x000 - 0x0FF SPI access 0x000 - 0x07F */
@ -61,9 +57,9 @@
#define DA9063_REG_GPIO_10_11 0x1A
#define DA9063_REG_GPIO_12_13 0x1B
#define DA9063_REG_GPIO_14_15 0x1C
#define DA9063_REG_GPIO_MODE_0_7 0x1D
#define DA9063_REG_GPIO_MODE_8_15 0x1E
#define DA9063_REG_GPIO_SWITCH_CONT 0x1F
#define DA9063_REG_GPIO_MODE0_7 0x1D
#define DA9063_REG_GPIO_MODE8_15 0x1E
#define DA9063_REG_SWITCH_CONT 0x1F
/* Regulator Control Registers */
#define DA9063_REG_BCORE2_CONT 0x20
@ -83,7 +79,7 @@
#define DA9063_REG_LDO9_CONT 0x2E
#define DA9063_REG_LDO10_CONT 0x2F
#define DA9063_REG_LDO11_CONT 0x30
#define DA9063_REG_VIB 0x31
#define DA9063_REG_SUPPLIES 0x31
#define DA9063_REG_DVC_1 0x32
#define DA9063_REG_DVC_2 0x33
@ -97,9 +93,9 @@
#define DA9063_REG_ADCIN1_RES 0x3A
#define DA9063_REG_ADCIN2_RES 0x3B
#define DA9063_REG_ADCIN3_RES 0x3C
#define DA9063_REG_MON1_RES 0x3D
#define DA9063_REG_MON2_RES 0x3E
#define DA9063_REG_MON3_RES 0x3F
#define DA9063_REG_MON_A8_RES 0x3D
#define DA9063_REG_MON_A9_RES 0x3E
#define DA9063_REG_MON_A10_RES 0x3F
/* RTC Calendar and Alarm Registers */
#define DA9063_REG_COUNT_S 0x40
@ -108,15 +104,16 @@
#define DA9063_REG_COUNT_D 0x43
#define DA9063_REG_COUNT_MO 0x44
#define DA9063_REG_COUNT_Y 0x45
#define DA9063_REG_ALARM_MI 0x46
#define DA9063_REG_ALARM_H 0x47
#define DA9063_REG_ALARM_D 0x48
#define DA9063_REG_ALARM_MO 0x49
#define DA9063_REG_ALARM_Y 0x4A
#define DA9063_REG_SECOND_A 0x4B
#define DA9063_REG_SECOND_B 0x4C
#define DA9063_REG_SECOND_C 0x4D
#define DA9063_REG_SECOND_D 0x4E
#define DA9063_REG_ALARM_S 0x46
#define DA9063_REG_ALARM_MI 0x47
#define DA9063_REG_ALARM_H 0x48
#define DA9063_REG_ALARM_D 0x49
#define DA9063_REG_ALARM_MO 0x4A
#define DA9063_REG_ALARM_Y 0x4B
#define DA9063_REG_SECOND_A 0x4C
#define DA9063_REG_SECOND_B 0x4D
#define DA9063_REG_SECOND_C 0x4E
#define DA9063_REG_SECOND_D 0x4F
/* Sequencer Control Registers */
#define DA9063_REG_SEQ 0x81
@ -226,35 +223,37 @@
#define DA9063_REG_CONFIG_J 0x10F
#define DA9063_REG_CONFIG_K 0x110
#define DA9063_REG_CONFIG_L 0x111
#define DA9063_REG_MON_REG_1 0x112
#define DA9063_REG_MON_REG_2 0x113
#define DA9063_REG_MON_REG_3 0x114
#define DA9063_REG_MON_REG_4 0x115
#define DA9063_REG_MON_REG_5 0x116
#define DA9063_REG_MON_REG_6 0x117
#define DA9063_REG_TRIM_CLDR 0x118
#define DA9063_REG_CONFIG_M 0x112
#define DA9063_REG_CONFIG_N 0x113
#define DA9063_REG_MON_REG_1 0x114
#define DA9063_REG_MON_REG_2 0x115
#define DA9063_REG_MON_REG_3 0x116
#define DA9063_REG_MON_REG_4 0x117
#define DA9063_REG_MON_REG_5 0x11E
#define DA9063_REG_MON_REG_6 0x11F
#define DA9063_REG_TRIM_CLDR 0x120
/* General Purpose Registers */
#define DA9063_REG_GP_ID_0 0x119
#define DA9063_REG_GP_ID_1 0x11A
#define DA9063_REG_GP_ID_2 0x11B
#define DA9063_REG_GP_ID_3 0x11C
#define DA9063_REG_GP_ID_4 0x11D
#define DA9063_REG_GP_ID_5 0x11E
#define DA9063_REG_GP_ID_6 0x11F
#define DA9063_REG_GP_ID_7 0x120
#define DA9063_REG_GP_ID_8 0x121
#define DA9063_REG_GP_ID_9 0x122
#define DA9063_REG_GP_ID_10 0x123
#define DA9063_REG_GP_ID_11 0x124
#define DA9063_REG_GP_ID_12 0x125
#define DA9063_REG_GP_ID_13 0x126
#define DA9063_REG_GP_ID_14 0x127
#define DA9063_REG_GP_ID_15 0x128
#define DA9063_REG_GP_ID_16 0x129
#define DA9063_REG_GP_ID_17 0x12A
#define DA9063_REG_GP_ID_18 0x12B
#define DA9063_REG_GP_ID_19 0x12C
#define DA9063_REG_GP_ID_0 0x121
#define DA9063_REG_GP_ID_1 0x122
#define DA9063_REG_GP_ID_2 0x123
#define DA9063_REG_GP_ID_3 0x124
#define DA9063_REG_GP_ID_4 0x125
#define DA9063_REG_GP_ID_5 0x126
#define DA9063_REG_GP_ID_6 0x127
#define DA9063_REG_GP_ID_7 0x128
#define DA9063_REG_GP_ID_8 0x129
#define DA9063_REG_GP_ID_9 0x12A
#define DA9063_REG_GP_ID_10 0x12B
#define DA9063_REG_GP_ID_11 0x12C
#define DA9063_REG_GP_ID_12 0x12D
#define DA9063_REG_GP_ID_13 0x12E
#define DA9063_REG_GP_ID_14 0x12F
#define DA9063_REG_GP_ID_15 0x130
#define DA9063_REG_GP_ID_16 0x131
#define DA9063_REG_GP_ID_17 0x132
#define DA9063_REG_GP_ID_18 0x133
#define DA9063_REG_GP_ID_19 0x134
/* Chip ID and variant */
#define DA9063_REG_CHIP_ID 0x181
@ -405,8 +404,10 @@
/* DA9063_REG_CONTROL_B (addr=0x0F) */
#define DA9063_CHG_SEL 0x01
#define DA9063_WATCHDOG_PD 0x02
#define DA9063_RESET_BLINKING 0x04
#define DA9063_NRES_MODE 0x08
#define DA9063_NONKEY_LOCK 0x10
#define DA9063_BUCK_SLOWSTART 0x80
/* DA9063_REG_CONTROL_C (addr=0x10) */
#define DA9063_DEBOUNCING_MASK 0x07
@ -466,6 +467,7 @@
#define DA9063_GPADC_PAUSE 0x02
#define DA9063_PMIF_DIS 0x04
#define DA9063_HS2WIRE_DIS 0x08
#define DA9063_CLDR_PAUSE 0x10
#define DA9063_BBAT_DIS 0x20
#define DA9063_OUT_32K_PAUSE 0x40
#define DA9063_PMCONT_DIS 0x80
@ -660,7 +662,7 @@
#define DA9063_GPIO15_TYPE_GPO 0x04
#define DA9063_GPIO15_NO_WAKEUP 0x80
/* DA9063_REG_GPIO_MODE_0_7 (addr=0x1D) */
/* DA9063_REG_GPIO_MODE0_7 (addr=0x1D) */
#define DA9063_GPIO0_MODE 0x01
#define DA9063_GPIO1_MODE 0x02
#define DA9063_GPIO2_MODE 0x04
@ -670,7 +672,7 @@
#define DA9063_GPIO6_MODE 0x40
#define DA9063_GPIO7_MODE 0x80
/* DA9063_REG_GPIO_MODE_8_15 (addr=0x1E) */
/* DA9063_REG_GPIO_MODE8_15 (addr=0x1E) */
#define DA9063_GPIO8_MODE 0x01
#define DA9063_GPIO9_MODE 0x02
#define DA9063_GPIO10_MODE 0x04
@ -702,12 +704,12 @@
#define DA9063_SWITCH_SR_5MV 0x10
#define DA9063_SWITCH_SR_10MV 0x20
#define DA9063_SWITCH_SR_50MV 0x30
#define DA9063_SWITCH_SR_DIS 0x40
#define DA9063_CORE_SW_INTERNAL 0x40
#define DA9063_CP_EN_MODE 0x80
/* DA9063_REGL_Bxxxx_CONT common bits (addr=0x20-0x25) */
#define DA9063_BUCK_EN 0x01
#define DA9063_BUCK_GPI_MASK 0x06
#define DA9063_BUCK_GPI_MASK 0x06
#define DA9063_BUCK_GPI_OFF 0x00
#define DA9063_BUCK_GPI_GPIO1 0x02
#define DA9063_BUCK_GPI_GPIO2 0x04
@ -841,25 +843,27 @@
#define DA9063_COUNT_YEAR_MASK 0x3F
#define DA9063_MONITOR 0x40
/* DA9063_REG_ALARM_MI (addr=0x46) */
/* DA9063_REG_ALARM_S (addr=0x46) */
#define DA9063_ALARM_S_MASK 0x3F
#define DA9063_ALARM_STATUS_ALARM 0x80
#define DA9063_ALARM_STATUS_TICK 0x40
/* DA9063_REG_ALARM_MI (addr=0x47) */
#define DA9063_ALARM_MIN_MASK 0x3F
/* DA9063_REG_ALARM_H (addr=0x47) */
/* DA9063_REG_ALARM_H (addr=0x48) */
#define DA9063_ALARM_HOUR_MASK 0x1F
/* DA9063_REG_ALARM_D (addr=0x48) */
/* DA9063_REG_ALARM_D (addr=0x49) */
#define DA9063_ALARM_DAY_MASK 0x1F
/* DA9063_REG_ALARM_MO (addr=0x49) */
/* DA9063_REG_ALARM_MO (addr=0x4A) */
#define DA9063_TICK_WAKE 0x20
#define DA9063_TICK_TYPE 0x10
#define DA9063_TICK_TYPE_SEC 0x00
#define DA9063_TICK_TYPE_MIN 0x10
#define DA9063_ALARM_MONTH_MASK 0x0F
/* DA9063_REG_ALARM_Y (addr=0x4A) */
/* DA9063_REG_ALARM_Y (addr=0x4B) */
#define DA9063_TICK_ON 0x80
#define DA9063_ALARM_ON 0x40
#define DA9063_ALARM_YEAR_MASK 0x3F
@ -906,7 +910,7 @@
/* DA9063_REG_Bxxxx_CFG common bits (addr=0x9D-0xA2) */
#define DA9063_BUCK_FB_MASK 0x07
#define DA9063_BUCK_PD_DIS_SHIFT 5
#define DA9063_BUCK_PD_DIS_MASK 0x20
#define DA9063_BUCK_MODE_MASK 0xC0
#define DA9063_BUCK_MODE_MANUAL 0x00
#define DA9063_BUCK_MODE_SLEEP 0x40

View File

@ -21,23 +21,26 @@
#define LPC_ICH_H
/* Watchdog resources */
#define ICH_RES_IO_TCO 0
#define ICH_RES_IO_SMI 1
#define ICH_RES_MEM_OFF 2
#define ICH_RES_MEM_GCS 0
#define ICH_RES_IO_TCO 0
#define ICH_RES_IO_SMI 1
#define ICH_RES_MEM_OFF 2
#define ICH_RES_MEM_GCS_PMC 0
/* GPIO resources */
#define ICH_RES_GPIO 0
#define ICH_RES_GPE0 1
/* GPIO compatibility */
#define ICH_I3100_GPIO 0x401
#define ICH_V5_GPIO 0x501
#define ICH_V6_GPIO 0x601
#define ICH_V7_GPIO 0x701
#define ICH_V9_GPIO 0x801
#define ICH_V10CORP_GPIO 0xa01
#define ICH_V10CONS_GPIO 0xa11
enum {
ICH_I3100_GPIO,
ICH_V5_GPIO,
ICH_V6_GPIO,
ICH_V7_GPIO,
ICH_V9_GPIO,
ICH_V10CORP_GPIO,
ICH_V10CONS_GPIO,
AVOTON_GPIO,
};
struct lpc_ich_info {
char name[32];

View File

@ -248,14 +248,6 @@ enum max14577_charger_reg {
/* MAX14577 regulator SFOUT LDO voltage, fixed, uV */
#define MAX14577_REGULATOR_SAFEOUT_VOLTAGE 4900000
enum max14577_irq_source {
MAX14577_IRQ_INT1 = 0,
MAX14577_IRQ_INT2,
MAX14577_IRQ_INT3,
MAX14577_IRQ_REGS_NUM,
};
enum max14577_irq {
/* INT1 */
MAX14577_IRQ_INT1_ADC,

View File

@ -25,13 +25,8 @@
#ifndef __MAX14577_H__
#define __MAX14577_H__
#include <linux/mfd/max14577-private.h>
#include <linux/regulator/consumer.h>
/*
* MAX14577 Regulator
*/
/* MAX14577 regulator IDs */
enum max14577_regulators {
MAX14577_SAFEOUT = 0,

View File

@ -1,59 +0,0 @@
/*
* Copyright (c) 2011, Code Aurora Forum. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
/*
* Qualcomm PMIC irq 8xxx driver header file
*
*/
#ifndef __MFD_PM8XXX_IRQ_H
#define __MFD_PM8XXX_IRQ_H
#include <linux/errno.h>
#include <linux/err.h>
struct pm8xxx_irq_core_data {
u32 rev;
int nirqs;
};
struct pm8xxx_irq_platform_data {
int irq_base;
struct pm8xxx_irq_core_data irq_cdata;
int devirq;
int irq_trigger_flag;
};
struct pm_irq_chip;
#ifdef CONFIG_MFD_PM8XXX_IRQ
int pm8xxx_get_irq_stat(struct pm_irq_chip *chip, int irq);
struct pm_irq_chip *pm8xxx_irq_init(struct device *dev,
const struct pm8xxx_irq_platform_data *pdata);
int pm8xxx_irq_exit(struct pm_irq_chip *chip);
#else
static inline int pm8xxx_get_irq_stat(struct pm_irq_chip *chip, int irq)
{
return -ENXIO;
}
static inline struct pm_irq_chip *pm8xxx_irq_init(
const struct device *dev,
const struct pm8xxx_irq_platform_data *pdata)
{
return ERR_PTR(-ENXIO);
}
static inline int pm8xxx_irq_exit(struct pm_irq_chip *chip)
{
return -ENXIO;
}
#endif /* CONFIG_MFD_PM8XXX_IRQ */
#endif /* __MFD_PM8XXX_IRQ_H */

View File

@ -1,30 +0,0 @@
/*
* Copyright (c) 2011, Code Aurora Forum. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
/*
* Qualcomm PMIC 8921 driver header file
*
*/
#ifndef __MFD_PM8921_H
#define __MFD_PM8921_H
#include <linux/mfd/pm8xxx/irq.h>
#define PM8921_NR_IRQS 256
struct pm8921_platform_data {
int irq_base;
struct pm8xxx_irq_platform_data *irq_pdata;
};
#endif

View File

@ -0,0 +1,628 @@
/* Driver for Realtek RTS5139 USB card reader
*
* Copyright(c) 2009-2013 Realtek Semiconductor Corp. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2
* as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, see <http://www.gnu.org/licenses/>.
*
* Author:
* Roger Tseng <rogerable@realtek.com>
*/
#ifndef __RTSX_USB_H
#define __RTSX_USB_H
#include <linux/usb.h>
/* related module names */
#define RTSX_USB_SD_CARD 0
#define RTSX_USB_MS_CARD 1
/* endpoint numbers */
#define EP_BULK_OUT 1
#define EP_BULK_IN 2
#define EP_INTR_IN 3
/* USB vendor requests */
#define RTSX_USB_REQ_REG_OP 0x00
#define RTSX_USB_REQ_POLL 0x02
/* miscellaneous parameters */
#define MIN_DIV_N 60
#define MAX_DIV_N 120
#define MAX_PHASE 15
#define RX_TUNING_CNT 3
#define QFN24 0
#define LQFP48 1
#define CHECK_PKG(ucr, pkg) ((ucr)->package == (pkg))
/* data structures */
struct rtsx_ucr {
u16 vendor_id;
u16 product_id;
int package;
u8 ic_version;
bool is_rts5179;
unsigned int cur_clk;
u8 *cmd_buf;
unsigned int cmd_idx;
u8 *rsp_buf;
struct usb_device *pusb_dev;
struct usb_interface *pusb_intf;
struct usb_sg_request current_sg;
unsigned char *iobuf;
dma_addr_t iobuf_dma;
struct timer_list sg_timer;
struct mutex dev_mutex;
};
/* buffer size */
#define IOBUF_SIZE 1024
/* prototypes of exported functions */
extern int rtsx_usb_get_card_status(struct rtsx_ucr *ucr, u16 *status);
extern int rtsx_usb_read_register(struct rtsx_ucr *ucr, u16 addr, u8 *data);
extern int rtsx_usb_write_register(struct rtsx_ucr *ucr, u16 addr, u8 mask,
u8 data);
extern int rtsx_usb_ep0_write_register(struct rtsx_ucr *ucr, u16 addr, u8 mask,
u8 data);
extern int rtsx_usb_ep0_read_register(struct rtsx_ucr *ucr, u16 addr,
u8 *data);
extern void rtsx_usb_add_cmd(struct rtsx_ucr *ucr, u8 cmd_type,
u16 reg_addr, u8 mask, u8 data);
extern int rtsx_usb_send_cmd(struct rtsx_ucr *ucr, u8 flag, int timeout);
extern int rtsx_usb_get_rsp(struct rtsx_ucr *ucr, int rsp_len, int timeout);
extern int rtsx_usb_transfer_data(struct rtsx_ucr *ucr, unsigned int pipe,
void *buf, unsigned int len, int use_sg,
unsigned int *act_len, int timeout);
extern int rtsx_usb_read_ppbuf(struct rtsx_ucr *ucr, u8 *buf, int buf_len);
extern int rtsx_usb_write_ppbuf(struct rtsx_ucr *ucr, u8 *buf, int buf_len);
extern int rtsx_usb_switch_clock(struct rtsx_ucr *ucr, unsigned int card_clock,
u8 ssc_depth, bool initial_mode, bool double_clk, bool vpclk);
extern int rtsx_usb_card_exclusive_check(struct rtsx_ucr *ucr, int card);
/* card status */
#define SD_CD 0x01
#define MS_CD 0x02
#define XD_CD 0x04
#define CD_MASK (SD_CD | MS_CD | XD_CD)
#define SD_WP 0x08
/* reader command field offset & parameters */
#define READ_REG_CMD 0
#define WRITE_REG_CMD 1
#define CHECK_REG_CMD 2
#define PACKET_TYPE 4
#define CNT_H 5
#define CNT_L 6
#define STAGE_FLAG 7
#define CMD_OFFSET 8
#define SEQ_WRITE_DATA_OFFSET 12
#define BATCH_CMD 0
#define SEQ_READ 1
#define SEQ_WRITE 2
#define STAGE_R 0x01
#define STAGE_DI 0x02
#define STAGE_DO 0x04
#define STAGE_MS_STATUS 0x08
#define STAGE_XD_STATUS 0x10
#define MODE_C 0x00
#define MODE_CR (STAGE_R)
#define MODE_CDIR (STAGE_R | STAGE_DI)
#define MODE_CDOR (STAGE_R | STAGE_DO)
#define EP0_OP_SHIFT 14
#define EP0_READ_REG_CMD 2
#define EP0_WRITE_REG_CMD 3
#define rtsx_usb_cmd_hdr_tag(ucr) \
do { \
ucr->cmd_buf[0] = 'R'; \
ucr->cmd_buf[1] = 'T'; \
ucr->cmd_buf[2] = 'C'; \
ucr->cmd_buf[3] = 'R'; \
} while (0)
static inline void rtsx_usb_init_cmd(struct rtsx_ucr *ucr)
{
rtsx_usb_cmd_hdr_tag(ucr);
ucr->cmd_idx = 0;
ucr->cmd_buf[PACKET_TYPE] = BATCH_CMD;
}
/* internal register address */
#define FPDCTL 0xFC00
#define SSC_DIV_N_0 0xFC07
#define SSC_CTL1 0xFC09
#define SSC_CTL2 0xFC0A
#define CFG_MODE 0xFC0E
#define CFG_MODE_1 0xFC0F
#define RCCTL 0xFC14
#define SOF_WDOG 0xFC28
#define SYS_DUMMY0 0xFC30
#define MS_BLKEND 0xFD30
#define MS_READ_START 0xFD31
#define MS_READ_COUNT 0xFD32
#define MS_WRITE_START 0xFD33
#define MS_WRITE_COUNT 0xFD34
#define MS_COMMAND 0xFD35
#define MS_OLD_BLOCK_0 0xFD36
#define MS_OLD_BLOCK_1 0xFD37
#define MS_NEW_BLOCK_0 0xFD38
#define MS_NEW_BLOCK_1 0xFD39
#define MS_LOG_BLOCK_0 0xFD3A
#define MS_LOG_BLOCK_1 0xFD3B
#define MS_BUS_WIDTH 0xFD3C
#define MS_PAGE_START 0xFD3D
#define MS_PAGE_LENGTH 0xFD3E
#define MS_CFG 0xFD40
#define MS_TPC 0xFD41
#define MS_TRANS_CFG 0xFD42
#define MS_TRANSFER 0xFD43
#define MS_INT_REG 0xFD44
#define MS_BYTE_CNT 0xFD45
#define MS_SECTOR_CNT_L 0xFD46
#define MS_SECTOR_CNT_H 0xFD47
#define MS_DBUS_H 0xFD48
#define CARD_DMA1_CTL 0xFD5C
#define CARD_PULL_CTL1 0xFD60
#define CARD_PULL_CTL2 0xFD61
#define CARD_PULL_CTL3 0xFD62
#define CARD_PULL_CTL4 0xFD63
#define CARD_PULL_CTL5 0xFD64
#define CARD_PULL_CTL6 0xFD65
#define CARD_EXIST 0xFD6F
#define CARD_INT_PEND 0xFD71
#define LDO_POWER_CFG 0xFD7B
#define SD_CFG1 0xFDA0
#define SD_CFG2 0xFDA1
#define SD_CFG3 0xFDA2
#define SD_STAT1 0xFDA3
#define SD_STAT2 0xFDA4
#define SD_BUS_STAT 0xFDA5
#define SD_PAD_CTL 0xFDA6
#define SD_SAMPLE_POINT_CTL 0xFDA7
#define SD_PUSH_POINT_CTL 0xFDA8
#define SD_CMD0 0xFDA9
#define SD_CMD1 0xFDAA
#define SD_CMD2 0xFDAB
#define SD_CMD3 0xFDAC
#define SD_CMD4 0xFDAD
#define SD_CMD5 0xFDAE
#define SD_BYTE_CNT_L 0xFDAF
#define SD_BYTE_CNT_H 0xFDB0
#define SD_BLOCK_CNT_L 0xFDB1
#define SD_BLOCK_CNT_H 0xFDB2
#define SD_TRANSFER 0xFDB3
#define SD_CMD_STATE 0xFDB5
#define SD_DATA_STATE 0xFDB6
#define SD_VPCLK0_CTL 0xFC2A
#define SD_VPCLK1_CTL 0xFC2B
#define SD_DCMPS0_CTL 0xFC2C
#define SD_DCMPS1_CTL 0xFC2D
#define CARD_DMA1_CTL 0xFD5C
#define HW_VERSION 0xFC01
#define SSC_CLK_FPGA_SEL 0xFC02
#define CLK_DIV 0xFC03
#define SFSM_ED 0xFC04
#define CD_DEGLITCH_WIDTH 0xFC20
#define CD_DEGLITCH_EN 0xFC21
#define AUTO_DELINK_EN 0xFC23
#define FPGA_PULL_CTL 0xFC1D
#define CARD_CLK_SOURCE 0xFC2E
#define CARD_SHARE_MODE 0xFD51
#define CARD_DRIVE_SEL 0xFD52
#define CARD_STOP 0xFD53
#define CARD_OE 0xFD54
#define CARD_AUTO_BLINK 0xFD55
#define CARD_GPIO 0xFD56
#define SD30_DRIVE_SEL 0xFD57
#define CARD_DATA_SOURCE 0xFD5D
#define CARD_SELECT 0xFD5E
#define CARD_CLK_EN 0xFD79
#define CARD_PWR_CTL 0xFD7A
#define OCPCTL 0xFD80
#define OCPPARA1 0xFD81
#define OCPPARA2 0xFD82
#define OCPSTAT 0xFD83
#define HS_USB_STAT 0xFE01
#define HS_VCONTROL 0xFE26
#define HS_VSTAIN 0xFE27
#define HS_VLOADM 0xFE28
#define HS_VSTAOUT 0xFE29
#define MC_IRQ 0xFF00
#define MC_IRQEN 0xFF01
#define MC_FIFO_CTL 0xFF02
#define MC_FIFO_BC0 0xFF03
#define MC_FIFO_BC1 0xFF04
#define MC_FIFO_STAT 0xFF05
#define MC_FIFO_MODE 0xFF06
#define MC_FIFO_RD_PTR0 0xFF07
#define MC_FIFO_RD_PTR1 0xFF08
#define MC_DMA_CTL 0xFF10
#define MC_DMA_TC0 0xFF11
#define MC_DMA_TC1 0xFF12
#define MC_DMA_TC2 0xFF13
#define MC_DMA_TC3 0xFF14
#define MC_DMA_RST 0xFF15
#define RBUF_SIZE_MASK 0xFBFF
#define RBUF_BASE 0xF000
#define PPBUF_BASE1 0xF800
#define PPBUF_BASE2 0xFA00
/* internal register value macros */
#define POWER_OFF 0x03
#define PARTIAL_POWER_ON 0x02
#define POWER_ON 0x00
#define POWER_MASK 0x03
#define LDO3318_PWR_MASK 0x0C
#define LDO_ON 0x00
#define LDO_SUSPEND 0x08
#define LDO_OFF 0x0C
#define DV3318_AUTO_PWR_OFF 0x10
#define FORCE_LDO_POWERB 0x60
/* LDO_POWER_CFG */
#define TUNE_SD18_MASK 0x1C
#define TUNE_SD18_1V7 0x00
#define TUNE_SD18_1V8 (0x01 << 2)
#define TUNE_SD18_1V9 (0x02 << 2)
#define TUNE_SD18_2V0 (0x03 << 2)
#define TUNE_SD18_2V7 (0x04 << 2)
#define TUNE_SD18_2V8 (0x05 << 2)
#define TUNE_SD18_2V9 (0x06 << 2)
#define TUNE_SD18_3V3 (0x07 << 2)
/* CLK_DIV */
#define CLK_CHANGE 0x80
#define CLK_DIV_1 0x00
#define CLK_DIV_2 0x01
#define CLK_DIV_4 0x02
#define CLK_DIV_8 0x03
#define SSC_POWER_MASK 0x01
#define SSC_POWER_DOWN 0x01
#define SSC_POWER_ON 0x00
#define FPGA_VER 0x80
#define HW_VER_MASK 0x0F
#define EXTEND_DMA1_ASYNC_SIGNAL 0x02
/* CFG_MODE*/
#define XTAL_FREE 0x80
#define CLK_MODE_MASK 0x03
#define CLK_MODE_12M_XTAL 0x00
#define CLK_MODE_NON_XTAL 0x01
#define CLK_MODE_24M_OSC 0x02
#define CLK_MODE_48M_OSC 0x03
/* CFG_MODE_1*/
#define RTS5179 0x02
#define NYET_EN 0x01
#define NYET_MSAK 0x01
#define SD30_DRIVE_MASK 0x07
#define SD20_DRIVE_MASK 0x03
#define DISABLE_SD_CD 0x08
#define DISABLE_MS_CD 0x10
#define DISABLE_XD_CD 0x20
#define SD_CD_DEGLITCH_EN 0x01
#define MS_CD_DEGLITCH_EN 0x02
#define XD_CD_DEGLITCH_EN 0x04
#define CARD_SHARE_LQFP48 0x04
#define CARD_SHARE_QFN24 0x00
#define CARD_SHARE_LQFP_SEL 0x04
#define CARD_SHARE_XD 0x00
#define CARD_SHARE_SD 0x01
#define CARD_SHARE_MS 0x02
#define CARD_SHARE_MASK 0x03
/* SD30_DRIVE_SEL */
#define DRIVER_TYPE_A 0x05
#define DRIVER_TYPE_B 0x03
#define DRIVER_TYPE_C 0x02
#define DRIVER_TYPE_D 0x01
/* SD_BUS_STAT */
#define SD_CLK_TOGGLE_EN 0x80
#define SD_CLK_FORCE_STOP 0x40
#define SD_DAT3_STATUS 0x10
#define SD_DAT2_STATUS 0x08
#define SD_DAT1_STATUS 0x04
#define SD_DAT0_STATUS 0x02
#define SD_CMD_STATUS 0x01
/* SD_PAD_CTL */
#define SD_IO_USING_1V8 0x80
#define SD_IO_USING_3V3 0x7F
#define TYPE_A_DRIVING 0x00
#define TYPE_B_DRIVING 0x01
#define TYPE_C_DRIVING 0x02
#define TYPE_D_DRIVING 0x03
/* CARD_CLK_EN */
#define SD_CLK_EN 0x04
#define MS_CLK_EN 0x08
/* CARD_SELECT */
#define SD_MOD_SEL 2
#define MS_MOD_SEL 3
/* CARD_SHARE_MODE */
#define CARD_SHARE_LQFP48 0x04
#define CARD_SHARE_QFN24 0x00
#define CARD_SHARE_LQFP_SEL 0x04
#define CARD_SHARE_XD 0x00
#define CARD_SHARE_SD 0x01
#define CARD_SHARE_MS 0x02
#define CARD_SHARE_MASK 0x03
/* SSC_CTL1 */
#define SSC_RSTB 0x80
#define SSC_8X_EN 0x40
#define SSC_FIX_FRAC 0x20
#define SSC_SEL_1M 0x00
#define SSC_SEL_2M 0x08
#define SSC_SEL_4M 0x10
#define SSC_SEL_8M 0x18
/* SSC_CTL2 */
#define SSC_DEPTH_MASK 0x03
#define SSC_DEPTH_DISALBE 0x00
#define SSC_DEPTH_2M 0x01
#define SSC_DEPTH_1M 0x02
#define SSC_DEPTH_512K 0x03
/* SD_VPCLK0_CTL */
#define PHASE_CHANGE 0x80
#define PHASE_NOT_RESET 0x40
/* SD_TRANSFER */
#define SD_TRANSFER_START 0x80
#define SD_TRANSFER_END 0x40
#define SD_STAT_IDLE 0x20
#define SD_TRANSFER_ERR 0x10
#define SD_TM_NORMAL_WRITE 0x00
#define SD_TM_AUTO_WRITE_3 0x01
#define SD_TM_AUTO_WRITE_4 0x02
#define SD_TM_AUTO_READ_3 0x05
#define SD_TM_AUTO_READ_4 0x06
#define SD_TM_CMD_RSP 0x08
#define SD_TM_AUTO_WRITE_1 0x09
#define SD_TM_AUTO_WRITE_2 0x0A
#define SD_TM_NORMAL_READ 0x0C
#define SD_TM_AUTO_READ_1 0x0D
#define SD_TM_AUTO_READ_2 0x0E
#define SD_TM_AUTO_TUNING 0x0F
/* SD_CFG1 */
#define SD_CLK_DIVIDE_0 0x00
#define SD_CLK_DIVIDE_256 0xC0
#define SD_CLK_DIVIDE_128 0x80
#define SD_CLK_DIVIDE_MASK 0xC0
#define SD_BUS_WIDTH_1BIT 0x00
#define SD_BUS_WIDTH_4BIT 0x01
#define SD_BUS_WIDTH_8BIT 0x02
#define SD_ASYNC_FIFO_RST 0x10
#define SD_20_MODE 0x00
#define SD_DDR_MODE 0x04
#define SD_30_MODE 0x08
/* SD_CFG2 */
#define SD_CALCULATE_CRC7 0x00
#define SD_NO_CALCULATE_CRC7 0x80
#define SD_CHECK_CRC16 0x00
#define SD_NO_CHECK_CRC16 0x40
#define SD_WAIT_CRC_TO_EN 0x20
#define SD_WAIT_BUSY_END 0x08
#define SD_NO_WAIT_BUSY_END 0x00
#define SD_CHECK_CRC7 0x00
#define SD_NO_CHECK_CRC7 0x04
#define SD_RSP_LEN_0 0x00
#define SD_RSP_LEN_6 0x01
#define SD_RSP_LEN_17 0x02
#define SD_RSP_TYPE_R0 0x04
#define SD_RSP_TYPE_R1 0x01
#define SD_RSP_TYPE_R1b 0x09
#define SD_RSP_TYPE_R2 0x02
#define SD_RSP_TYPE_R3 0x05
#define SD_RSP_TYPE_R4 0x05
#define SD_RSP_TYPE_R5 0x01
#define SD_RSP_TYPE_R6 0x01
#define SD_RSP_TYPE_R7 0x01
/* SD_STAT1 */
#define SD_CRC7_ERR 0x80
#define SD_CRC16_ERR 0x40
#define SD_CRC_WRITE_ERR 0x20
#define SD_CRC_WRITE_ERR_MASK 0x1C
#define GET_CRC_TIME_OUT 0x02
#define SD_TUNING_COMPARE_ERR 0x01
/* SD_DATA_STATE */
#define SD_DATA_IDLE 0x80
/* CARD_DATA_SOURCE */
#define PINGPONG_BUFFER 0x01
#define RING_BUFFER 0x00
/* CARD_OE */
#define SD_OUTPUT_EN 0x04
#define MS_OUTPUT_EN 0x08
/* CARD_STOP */
#define SD_STOP 0x04
#define MS_STOP 0x08
#define SD_CLR_ERR 0x40
#define MS_CLR_ERR 0x80
/* CARD_CLK_SOURCE */
#define CRC_FIX_CLK (0x00 << 0)
#define CRC_VAR_CLK0 (0x01 << 0)
#define CRC_VAR_CLK1 (0x02 << 0)
#define SD30_FIX_CLK (0x00 << 2)
#define SD30_VAR_CLK0 (0x01 << 2)
#define SD30_VAR_CLK1 (0x02 << 2)
#define SAMPLE_FIX_CLK (0x00 << 4)
#define SAMPLE_VAR_CLK0 (0x01 << 4)
#define SAMPLE_VAR_CLK1 (0x02 << 4)
/* SD_SAMPLE_POINT_CTL */
#define DDR_FIX_RX_DAT 0x00
#define DDR_VAR_RX_DAT 0x80
#define DDR_FIX_RX_DAT_EDGE 0x00
#define DDR_FIX_RX_DAT_14_DELAY 0x40
#define DDR_FIX_RX_CMD 0x00
#define DDR_VAR_RX_CMD 0x20
#define DDR_FIX_RX_CMD_POS_EDGE 0x00
#define DDR_FIX_RX_CMD_14_DELAY 0x10
#define SD20_RX_POS_EDGE 0x00
#define SD20_RX_14_DELAY 0x08
#define SD20_RX_SEL_MASK 0x08
/* SD_PUSH_POINT_CTL */
#define DDR_FIX_TX_CMD_DAT 0x00
#define DDR_VAR_TX_CMD_DAT 0x80
#define DDR_FIX_TX_DAT_14_TSU 0x00
#define DDR_FIX_TX_DAT_12_TSU 0x40
#define DDR_FIX_TX_CMD_NEG_EDGE 0x00
#define DDR_FIX_TX_CMD_14_AHEAD 0x20
#define SD20_TX_NEG_EDGE 0x00
#define SD20_TX_14_AHEAD 0x10
#define SD20_TX_SEL_MASK 0x10
#define DDR_VAR_SDCLK_POL_SWAP 0x01
/* MS_CFG */
#define SAMPLE_TIME_RISING 0x00
#define SAMPLE_TIME_FALLING 0x80
#define PUSH_TIME_DEFAULT 0x00
#define PUSH_TIME_ODD 0x40
#define NO_EXTEND_TOGGLE 0x00
#define EXTEND_TOGGLE_CHK 0x20
#define MS_BUS_WIDTH_1 0x00
#define MS_BUS_WIDTH_4 0x10
#define MS_BUS_WIDTH_8 0x18
#define MS_2K_SECTOR_MODE 0x04
#define MS_512_SECTOR_MODE 0x00
#define MS_TOGGLE_TIMEOUT_EN 0x00
#define MS_TOGGLE_TIMEOUT_DISEN 0x01
#define MS_NO_CHECK_INT 0x02
/* MS_TRANS_CFG */
#define WAIT_INT 0x80
#define NO_WAIT_INT 0x00
#define NO_AUTO_READ_INT_REG 0x00
#define AUTO_READ_INT_REG 0x40
#define MS_CRC16_ERR 0x20
#define MS_RDY_TIMEOUT 0x10
#define MS_INT_CMDNK 0x08
#define MS_INT_BREQ 0x04
#define MS_INT_ERR 0x02
#define MS_INT_CED 0x01
/* MS_TRANSFER */
#define MS_TRANSFER_START 0x80
#define MS_TRANSFER_END 0x40
#define MS_TRANSFER_ERR 0x20
#define MS_BS_STATE 0x10
#define MS_TM_READ_BYTES 0x00
#define MS_TM_NORMAL_READ 0x01
#define MS_TM_WRITE_BYTES 0x04
#define MS_TM_NORMAL_WRITE 0x05
#define MS_TM_AUTO_READ 0x08
#define MS_TM_AUTO_WRITE 0x0C
#define MS_TM_SET_CMD 0x06
#define MS_TM_COPY_PAGE 0x07
#define MS_TM_MULTI_READ 0x02
#define MS_TM_MULTI_WRITE 0x03
/* MC_FIFO_CTL */
#define FIFO_FLUSH 0x01
/* MC_DMA_RST */
#define DMA_RESET 0x01
/* MC_DMA_CTL */
#define DMA_TC_EQ_0 0x80
#define DMA_DIR_TO_CARD 0x00
#define DMA_DIR_FROM_CARD 0x02
#define DMA_EN 0x01
#define DMA_128 (0 << 2)
#define DMA_256 (1 << 2)
#define DMA_512 (2 << 2)
#define DMA_1024 (3 << 2)
#define DMA_PACK_SIZE_MASK 0x0C
/* CARD_INT_PEND */
#define XD_INT 0x10
#define MS_INT 0x08
#define SD_INT 0x04
/* LED operations*/
static inline int rtsx_usb_turn_on_led(struct rtsx_ucr *ucr)
{
return rtsx_usb_ep0_write_register(ucr, CARD_GPIO, 0x03, 0x02);
}
static inline int rtsx_usb_turn_off_led(struct rtsx_ucr *ucr)
{
return rtsx_usb_ep0_write_register(ucr, CARD_GPIO, 0x03, 0x03);
}
/* HW error clearing */
static inline void rtsx_usb_clear_fsm_err(struct rtsx_ucr *ucr)
{
rtsx_usb_ep0_write_register(ucr, SFSM_ED, 0xf8, 0xf8);
}
static inline void rtsx_usb_clear_dma_err(struct rtsx_ucr *ucr)
{
rtsx_usb_ep0_write_register(ucr, MC_FIFO_CTL,
FIFO_FLUSH, FIFO_FLUSH);
rtsx_usb_ep0_write_register(ucr, MC_DMA_RST, DMA_RESET, DMA_RESET);
}
#endif /* __RTS51139_H */

View File

@ -0,0 +1,284 @@
/*
* linux/mfd/tps65218.h
*
* Functions to access TPS65219 power management chip.
*
* Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
* kind, whether expressed or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License version 2 for more details.
*/
#ifndef __LINUX_MFD_TPS65218_H
#define __LINUX_MFD_TPS65218_H
#include <linux/i2c.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/bitops.h>
/* TPS chip id list */
#define TPS65218 0xF0
/* I2C ID for TPS65218 part */
#define TPS65218_I2C_ID 0x24
/* All register addresses */
#define TPS65218_REG_CHIPID 0x00
#define TPS65218_REG_INT1 0x01
#define TPS65218_REG_INT2 0x02
#define TPS65218_REG_INT_MASK1 0x03
#define TPS65218_REG_INT_MASK2 0x04
#define TPS65218_REG_STATUS 0x05
#define TPS65218_REG_CONTROL 0x06
#define TPS65218_REG_FLAG 0x07
#define TPS65218_REG_PASSWORD 0x10
#define TPS65218_REG_ENABLE1 0x11
#define TPS65218_REG_ENABLE2 0x12
#define TPS65218_REG_CONFIG1 0x13
#define TPS65218_REG_CONFIG2 0x14
#define TPS65218_REG_CONFIG3 0x15
#define TPS65218_REG_CONTROL_DCDC1 0x16
#define TPS65218_REG_CONTROL_DCDC2 0x17
#define TPS65218_REG_CONTROL_DCDC3 0x18
#define TPS65218_REG_CONTROL_DCDC4 0x19
#define TPS65218_REG_CONTRL_SLEW_RATE 0x1A
#define TPS65218_REG_CONTROL_LDO1 0x1B
#define TPS65218_REG_SEQ1 0x20
#define TPS65218_REG_SEQ2 0x21
#define TPS65218_REG_SEQ3 0x22
#define TPS65218_REG_SEQ4 0x23
#define TPS65218_REG_SEQ5 0x24
#define TPS65218_REG_SEQ6 0x25
#define TPS65218_REG_SEQ7 0x26
/* Register field definitions */
#define TPS65218_CHIPID_CHIP_MASK 0xF8
#define TPS65218_CHIPID_REV_MASK 0x07
#define TPS65218_INT1_VPRG BIT(5)
#define TPS65218_INT1_AC BIT(4)
#define TPS65218_INT1_PB BIT(3)
#define TPS65218_INT1_HOT BIT(2)
#define TPS65218_INT1_CC_AQC BIT(1)
#define TPS65218_INT1_PRGC BIT(0)
#define TPS65218_INT2_LS3_F BIT(5)
#define TPS65218_INT2_LS2_F BIT(4)
#define TPS65218_INT2_LS1_F BIT(3)
#define TPS65218_INT2_LS3_I BIT(2)
#define TPS65218_INT2_LS2_I BIT(1)
#define TPS65218_INT2_LS1_I BIT(0)
#define TPS65218_INT_MASK1_VPRG BIT(5)
#define TPS65218_INT_MASK1_AC BIT(4)
#define TPS65218_INT_MASK1_PB BIT(3)
#define TPS65218_INT_MASK1_HOT BIT(2)
#define TPS65218_INT_MASK1_CC_AQC BIT(1)
#define TPS65218_INT_MASK1_PRGC BIT(0)
#define TPS65218_INT_MASK2_LS3_F BIT(5)
#define TPS65218_INT_MASK2_LS2_F BIT(4)
#define TPS65218_INT_MASK2_LS1_F BIT(3)
#define TPS65218_INT_MASK2_LS3_I BIT(2)
#define TPS65218_INT_MASK2_LS2_I BIT(1)
#define TPS65218_INT_MASK2_LS1_I BIT(0)
#define TPS65218_STATUS_FSEAL BIT(7)
#define TPS65218_STATUS_EE BIT(6)
#define TPS65218_STATUS_AC_STATE BIT(5)
#define TPS65218_STATUS_PB_STATE BIT(4)
#define TPS65218_STATUS_STATE_MASK 0xC
#define TPS65218_STATUS_CC_STAT 0x3
#define TPS65218_CONTROL_OFFNPFO BIT(1)
#define TPS65218_CONTROL_CC_AQ BIT(0)
#define TPS65218_FLAG_GPO3_FLG BIT(7)
#define TPS65218_FLAG_GPO2_FLG BIT(6)
#define TPS65218_FLAG_GPO1_FLG BIT(5)
#define TPS65218_FLAG_LDO1_FLG BIT(4)
#define TPS65218_FLAG_DC4_FLG BIT(3)
#define TPS65218_FLAG_DC3_FLG BIT(2)
#define TPS65218_FLAG_DC2_FLG BIT(1)
#define TPS65218_FLAG_DC1_FLG BIT(0)
#define TPS65218_ENABLE1_DC6_EN BIT(5)
#define TPS65218_ENABLE1_DC5_EN BIT(4)
#define TPS65218_ENABLE1_DC4_EN BIT(3)
#define TPS65218_ENABLE1_DC3_EN BIT(2)
#define TPS65218_ENABLE1_DC2_EN BIT(1)
#define TPS65218_ENABLE1_DC1_EN BIT(0)
#define TPS65218_ENABLE2_GPIO3 BIT(6)
#define TPS65218_ENABLE2_GPIO2 BIT(5)
#define TPS65218_ENABLE2_GPIO1 BIT(4)
#define TPS65218_ENABLE2_LS3_EN BIT(3)
#define TPS65218_ENABLE2_LS2_EN BIT(2)
#define TPS65218_ENABLE2_LS1_EN BIT(1)
#define TPS65218_ENABLE2_LDO1_EN BIT(0)
#define TPS65218_CONFIG1_TRST BIT(7)
#define TPS65218_CONFIG1_GPO2_BUF BIT(6)
#define TPS65218_CONFIG1_IO1_SEL BIT(5)
#define TPS65218_CONFIG1_PGDLY_MASK 0x18
#define TPS65218_CONFIG1_STRICT BIT(2)
#define TPS65218_CONFIG1_UVLO_MASK 0x3
#define TPS65218_CONFIG2_DC12_RST BIT(7)
#define TPS65218_CONFIG2_UVLOHYS BIT(6)
#define TPS65218_CONFIG2_LS3ILIM_MASK 0xC
#define TPS65218_CONFIG2_LS2ILIM_MASK 0x3
#define TPS65218_CONFIG3_LS3NPFO BIT(5)
#define TPS65218_CONFIG3_LS2NPFO BIT(4)
#define TPS65218_CONFIG3_LS1NPFO BIT(3)
#define TPS65218_CONFIG3_LS3DCHRG BIT(2)
#define TPS65218_CONFIG3_LS2DCHRG BIT(1)
#define TPS65218_CONFIG3_LS1DCHRG BIT(0)
#define TPS65218_CONTROL_DCDC1_PFM BIT(7)
#define TPS65218_CONTROL_DCDC1_MASK 0x7F
#define TPS65218_CONTROL_DCDC2_PFM BIT(7)
#define TPS65218_CONTROL_DCDC2_MASK 0x3F
#define TPS65218_CONTROL_DCDC3_PFM BIT(7)
#define TPS65218_CONTROL_DCDC3_MASK 0x3F
#define TPS65218_CONTROL_DCDC4_PFM BIT(7)
#define TPS65218_CONTROL_DCDC4_MASK 0x3F
#define TPS65218_SLEW_RATE_GO BIT(7)
#define TPS65218_SLEW_RATE_GODSBL BIT(6)
#define TPS65218_SLEW_RATE_SLEW_MASK 0x7
#define TPS65218_CONTROL_LDO1_MASK 0x3F
#define TPS65218_SEQ1_DLY8 BIT(7)
#define TPS65218_SEQ1_DLY7 BIT(6)
#define TPS65218_SEQ1_DLY6 BIT(5)
#define TPS65218_SEQ1_DLY5 BIT(4)
#define TPS65218_SEQ1_DLY4 BIT(3)
#define TPS65218_SEQ1_DLY3 BIT(2)
#define TPS65218_SEQ1_DLY2 BIT(1)
#define TPS65218_SEQ1_DLY1 BIT(0)
#define TPS65218_SEQ2_DLYFCTR BIT(7)
#define TPS65218_SEQ2_DLY9 BIT(0)
#define TPS65218_SEQ3_DC2_SEQ_MASK 0xF0
#define TPS65218_SEQ3_DC1_SEQ_MASK 0xF
#define TPS65218_SEQ4_DC4_SEQ_MASK 0xF0
#define TPS65218_SEQ4_DC3_SEQ_MASK 0xF
#define TPS65218_SEQ5_DC6_SEQ_MASK 0xF0
#define TPS65218_SEQ5_DC5_SEQ_MASK 0xF
#define TPS65218_SEQ6_LS1_SEQ_MASK 0xF0
#define TPS65218_SEQ6_LDO1_SEQ_MASK 0xF
#define TPS65218_SEQ7_GPO3_SEQ_MASK 0xF0
#define TPS65218_SEQ7_GPO1_SEQ_MASK 0xF
#define TPS65218_PROTECT_NONE 0
#define TPS65218_PROTECT_L1 1
enum tps65218_regulator_id {
/* DCDC's */
TPS65218_DCDC_1,
TPS65218_DCDC_2,
TPS65218_DCDC_3,
TPS65218_DCDC_4,
TPS65218_DCDC_5,
TPS65218_DCDC_6,
/* LDOs */
TPS65218_LDO_1,
};
#define TPS65218_MAX_REG_ID TPS65218_LDO_1
/* Number of step-down converters available */
#define TPS65218_NUM_DCDC 6
/* Number of LDO voltage regulators available */
#define TPS65218_NUM_LDO 1
/* Number of total regulators available */
#define TPS65218_NUM_REGULATOR (TPS65218_NUM_DCDC + TPS65218_NUM_LDO)
/* Define the TPS65218 IRQ numbers */
enum tps65218_irqs {
/* INT1 registers */
TPS65218_PRGC_IRQ,
TPS65218_CC_AQC_IRQ,
TPS65218_HOT_IRQ,
TPS65218_PB_IRQ,
TPS65218_AC_IRQ,
TPS65218_VPRG_IRQ,
TPS65218_INVALID1_IRQ,
TPS65218_INVALID2_IRQ,
/* INT2 registers */
TPS65218_LS1_I_IRQ,
TPS65218_LS2_I_IRQ,
TPS65218_LS3_I_IRQ,
TPS65218_LS1_F_IRQ,
TPS65218_LS2_F_IRQ,
TPS65218_LS3_F_IRQ,
TPS65218_INVALID3_IRQ,
TPS65218_INVALID4_IRQ,
};
/**
* struct tps_info - packages regulator constraints
* @id: Id of the regulator
* @name: Voltage regulator name
* @min_uV: minimum micro volts
* @max_uV: minimum micro volts
*
* This data is used to check the regualtor voltage limits while setting.
*/
struct tps_info {
int id;
const char *name;
int min_uV;
int max_uV;
};
/**
* struct tps65218 - tps65218 sub-driver chip access routines
*
* Device data may be used to access the TPS65218 chip
*/
struct tps65218 {
struct device *dev;
unsigned int id;
struct mutex tps_lock; /* lock guarding the data structure */
/* IRQ Data */
int irq;
u32 irq_mask;
struct regmap_irq_chip_data *irq_data;
struct regulator_desc desc[TPS65218_NUM_REGULATOR];
struct regulator_dev *rdev[TPS65218_NUM_REGULATOR];
struct tps_info *info[TPS65218_NUM_REGULATOR];
struct regmap *regmap;
};
int tps65218_reg_read(struct tps65218 *tps, unsigned int reg,
unsigned int *val);
int tps65218_reg_write(struct tps65218 *tps, unsigned int reg,
unsigned int val, unsigned int level);
int tps65218_set_bits(struct tps65218 *tps, unsigned int reg,
unsigned int mask, unsigned int val, unsigned int level);
int tps65218_clear_bits(struct tps65218 *tps, unsigned int reg,
unsigned int mask, unsigned int level);
#endif /* __LINUX_MFD_TPS65218_H */

View File

@ -20,4 +20,24 @@
int ssbi_write(struct device *dev, u16 addr, const u8 *buf, int len);
int ssbi_read(struct device *dev, u16 addr, u8 *buf, int len);
static inline int
ssbi_reg_read(void *context, unsigned int reg, unsigned int *val)
{
int ret;
u8 v;
ret = ssbi_read(context, reg, &v, 1);
if (!ret)
*val = v;
return ret;
}
static inline int
ssbi_reg_write(void *context, unsigned int reg, unsigned int val)
{
u8 v = val;
return ssbi_write(context, reg, &v, 1);
}
#endif