net: Move flow control definitions to mii.h

flags used within drivers for indicating tx and rx flow control are
defined in 4 drivers (and probably more), move these constants to mii.h.

The 3 SMSC drivers use the same constants (FLOW_CTRL_TX), but TG3 uses
TG3_FLOW_CTRL_TX, so this patch also renames the constants within TG3.

Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Steve Glendinning 2008-12-16 02:00:00 -08:00 committed by David S. Miller
parent f9867328f9
commit e18ce34654
6 changed files with 29 additions and 35 deletions

View File

@ -61,9 +61,6 @@
#define SMSC_ASSERT_MAC_LOCK(pdata) do {} while (0)
#endif /* CONFIG_DEBUG_SPINLOCK */
#define FLOW_CTRL_TX (1)
#define FLOW_CTRL_RX (2)
/* SMSC911x registers and bitfields */
#define RX_DATA_FIFO 0x00

View File

@ -45,9 +45,6 @@
#define SMSC9420_EEPROM_SIZE ((u32)11)
#define FLOW_CTRL_TX (1)
#define FLOW_CTRL_RX (2)
#define PKT_BUF_SZ (VLAN_ETH_FRAME_LEN + NET_IP_ALIGN + 4)
/***********************************************/

View File

@ -1187,9 +1187,9 @@ static void tg3_link_report(struct tg3 *tp)
printk(KERN_INFO PFX
"%s: Flow control is %s for TX and %s for RX.\n",
tp->dev->name,
(tp->link_config.active_flowctrl & TG3_FLOW_CTRL_TX) ?
(tp->link_config.active_flowctrl & FLOW_CTRL_TX) ?
"on" : "off",
(tp->link_config.active_flowctrl & TG3_FLOW_CTRL_RX) ?
(tp->link_config.active_flowctrl & FLOW_CTRL_RX) ?
"on" : "off");
tg3_ump_link_report(tp);
}
@ -1199,11 +1199,11 @@ static u16 tg3_advert_flowctrl_1000T(u8 flow_ctrl)
{
u16 miireg;
if ((flow_ctrl & TG3_FLOW_CTRL_TX) && (flow_ctrl & TG3_FLOW_CTRL_RX))
if ((flow_ctrl & FLOW_CTRL_TX) && (flow_ctrl & FLOW_CTRL_RX))
miireg = ADVERTISE_PAUSE_CAP;
else if (flow_ctrl & TG3_FLOW_CTRL_TX)
else if (flow_ctrl & FLOW_CTRL_TX)
miireg = ADVERTISE_PAUSE_ASYM;
else if (flow_ctrl & TG3_FLOW_CTRL_RX)
else if (flow_ctrl & FLOW_CTRL_RX)
miireg = ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
else
miireg = 0;
@ -1215,11 +1215,11 @@ static u16 tg3_advert_flowctrl_1000X(u8 flow_ctrl)
{
u16 miireg;
if ((flow_ctrl & TG3_FLOW_CTRL_TX) && (flow_ctrl & TG3_FLOW_CTRL_RX))
if ((flow_ctrl & FLOW_CTRL_TX) && (flow_ctrl & FLOW_CTRL_RX))
miireg = ADVERTISE_1000XPAUSE;
else if (flow_ctrl & TG3_FLOW_CTRL_TX)
else if (flow_ctrl & FLOW_CTRL_TX)
miireg = ADVERTISE_1000XPSE_ASYM;
else if (flow_ctrl & TG3_FLOW_CTRL_RX)
else if (flow_ctrl & FLOW_CTRL_RX)
miireg = ADVERTISE_1000XPAUSE | ADVERTISE_1000XPSE_ASYM;
else
miireg = 0;
@ -1256,16 +1256,16 @@ static u8 tg3_resolve_flowctrl_1000X(u16 lcladv, u16 rmtadv)
if (lcladv & ADVERTISE_1000XPAUSE) {
if (lcladv & ADVERTISE_1000XPSE_ASYM) {
if (rmtadv & LPA_1000XPAUSE)
cap = TG3_FLOW_CTRL_TX | TG3_FLOW_CTRL_RX;
cap = FLOW_CTRL_TX | FLOW_CTRL_RX;
else if (rmtadv & LPA_1000XPAUSE_ASYM)
cap = TG3_FLOW_CTRL_RX;
cap = FLOW_CTRL_RX;
} else {
if (rmtadv & LPA_1000XPAUSE)
cap = TG3_FLOW_CTRL_TX | TG3_FLOW_CTRL_RX;
cap = FLOW_CTRL_TX | FLOW_CTRL_RX;
}
} else if (lcladv & ADVERTISE_1000XPSE_ASYM) {
if ((rmtadv & LPA_1000XPAUSE) && (rmtadv & LPA_1000XPAUSE_ASYM))
cap = TG3_FLOW_CTRL_TX;
cap = FLOW_CTRL_TX;
}
return cap;
@ -1294,7 +1294,7 @@ static void tg3_setup_flow_control(struct tg3 *tp, u32 lcladv, u32 rmtadv)
tp->link_config.active_flowctrl = flowctrl;
if (flowctrl & TG3_FLOW_CTRL_RX)
if (flowctrl & FLOW_CTRL_RX)
tp->rx_mode |= RX_MODE_FLOW_CTRL_ENABLE;
else
tp->rx_mode &= ~RX_MODE_FLOW_CTRL_ENABLE;
@ -1302,7 +1302,7 @@ static void tg3_setup_flow_control(struct tg3 *tp, u32 lcladv, u32 rmtadv)
if (old_rx_mode != tp->rx_mode)
tw32_f(MAC_RX_MODE, tp->rx_mode);
if (flowctrl & TG3_FLOW_CTRL_TX)
if (flowctrl & FLOW_CTRL_TX)
tp->tx_mode |= TX_MODE_FLOW_CTRL_ENABLE;
else
tp->tx_mode &= ~TX_MODE_FLOW_CTRL_ENABLE;
@ -9419,12 +9419,12 @@ static void tg3_get_pauseparam(struct net_device *dev, struct ethtool_pauseparam
epause->autoneg = (tp->tg3_flags & TG3_FLAG_PAUSE_AUTONEG) != 0;
if (tp->link_config.active_flowctrl & TG3_FLOW_CTRL_RX)
if (tp->link_config.active_flowctrl & FLOW_CTRL_RX)
epause->rx_pause = 1;
else
epause->rx_pause = 0;
if (tp->link_config.active_flowctrl & TG3_FLOW_CTRL_TX)
if (tp->link_config.active_flowctrl & FLOW_CTRL_TX)
epause->tx_pause = 1;
else
epause->tx_pause = 0;
@ -9475,14 +9475,14 @@ static int tg3_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam
}
} else {
if (epause->rx_pause)
tp->link_config.flowctrl |= TG3_FLOW_CTRL_RX;
tp->link_config.flowctrl |= FLOW_CTRL_RX;
else
tp->link_config.flowctrl &= ~TG3_FLOW_CTRL_RX;
tp->link_config.flowctrl &= ~FLOW_CTRL_RX;
if (epause->tx_pause)
tp->link_config.flowctrl |= TG3_FLOW_CTRL_TX;
tp->link_config.flowctrl |= FLOW_CTRL_TX;
else
tp->link_config.flowctrl &= ~TG3_FLOW_CTRL_TX;
tp->link_config.flowctrl &= ~FLOW_CTRL_TX;
if (netif_running(dev))
tg3_setup_flow_control(tp, 0, 0);
@ -9502,13 +9502,13 @@ static int tg3_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam
else
tp->tg3_flags &= ~TG3_FLAG_PAUSE_AUTONEG;
if (epause->rx_pause)
tp->link_config.flowctrl |= TG3_FLOW_CTRL_RX;
tp->link_config.flowctrl |= FLOW_CTRL_RX;
else
tp->link_config.flowctrl &= ~TG3_FLOW_CTRL_RX;
tp->link_config.flowctrl &= ~FLOW_CTRL_RX;
if (epause->tx_pause)
tp->link_config.flowctrl |= TG3_FLOW_CTRL_TX;
tp->link_config.flowctrl |= FLOW_CTRL_TX;
else
tp->link_config.flowctrl &= ~TG3_FLOW_CTRL_TX;
tp->link_config.flowctrl &= ~FLOW_CTRL_TX;
if (netif_running(dev)) {
tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
@ -13849,7 +13849,7 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
/* flow control autonegotiation is default behavior */
tp->tg3_flags |= TG3_FLAG_PAUSE_AUTONEG;
tp->link_config.flowctrl = TG3_FLOW_CTRL_TX | TG3_FLOW_CTRL_RX;
tp->link_config.flowctrl = FLOW_CTRL_TX | FLOW_CTRL_RX;
tg3_init_coal(tp);

View File

@ -2338,8 +2338,6 @@ struct tg3_link_config {
u8 duplex;
u8 autoneg;
u8 flowctrl;
#define TG3_FLOW_CTRL_TX 0x01
#define TG3_FLOW_CTRL_RX 0x02
/* Describes what we actually have. */
u8 active_flowctrl;

View File

@ -45,8 +45,6 @@
#define SMSC95XX_INTERNAL_PHY_ID (1)
#define SMSC95XX_TX_OVERHEAD (8)
#define SMSC95XX_TX_OVERHEAD_CSUM (12)
#define FLOW_CTRL_TX (1)
#define FLOW_CTRL_RX (2)
struct smsc95xx_priv {
u32 mac_cr;

View File

@ -135,6 +135,10 @@
#define LPA_1000FULL 0x0800 /* Link partner 1000BASE-T full duplex */
#define LPA_1000HALF 0x0400 /* Link partner 1000BASE-T half duplex */
/* Flow control flags */
#define FLOW_CTRL_TX 0x01
#define FLOW_CTRL_RX 0x02
/* This structure is used in all SIOCxMIIxxx ioctl calls */
struct mii_ioctl_data {
__u16 phy_id;