Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-10 14:11:52 +00:00
Code Issues Packages Projects Releases Wiki Activity

First set of Counter updates for the 6.5 cycle

Browse Source 
Biggest changes in this set include the introduction of a new Intel 8254
 interface library module and the refactoring of the existing 104-quad-8
 modules to migrate it to the regmap API. Some other minor cleanups
 touching tools/counter and stm32-timer-cnt are also present.
 
 Changes
 * 104-quad-8
   - Remove reference in Kconfig to 25-bit counter value
   - Utilize bitfield access macros
   - Refactor to buffer states for CMR, IOR, and IDR
   - Utilize helper functions to handle PR, FLAG and PSC
   - Migrate to the regmap API
 * i8254
   - Introduce the Intel 8254 interface library module
 * stm32-timer-cnt
   - Reset TIM_TISEL to its default value in probe
 * tools/counter
   - Add .gitignore
   - Remove lingering 'include' directories on make clean
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQSNN83d4NIlKPjon7a1SFbKvhIjKwUCZIihZQAKCRC1SFbKvhIj
 K1wZAQCnujwsCYExil8fCHgdXufA+KsC5J4Clay7CLq5KmUdgwD+P9EJ5Hd37OeO
 tAV6Pt4yEmQQBfXQgMdD2lk1yf0iGg8=
 =r3E4
 -----END PGP SIGNATURE-----

Merge tag 'counter-updates-for-6.5a' of git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter into char-misc-next

William writes:

First set of Counter updates for the 6.5 cycle

Biggest changes in this set include the introduction of a new Intel 8254
interface library module and the refactoring of the existing 104-quad-8
modules to migrate it to the regmap API. Some other minor cleanups
touching tools/counter and stm32-timer-cnt are also present.

Changes
* 104-quad-8
  - Remove reference in Kconfig to 25-bit counter value
  - Utilize bitfield access macros
  - Refactor to buffer states for CMR, IOR, and IDR
  - Utilize helper functions to handle PR, FLAG and PSC
  - Migrate to the regmap API
* i8254
  - Introduce the Intel 8254 interface library module
* stm32-timer-cnt
  - Reset TIM_TISEL to its default value in probe
* tools/counter
  - Add .gitignore
  - Remove lingering 'include' directories on make clean

* tag 'counter-updates-for-6.5a' of git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter:
  counter: i8254: Introduce the Intel 8254 interface library module
  counter: 104-quad-8: Migrate to the regmap API
  counter: 104-quad-8: Utilize helper functions to handle PR, FLAG and PSC
  counter: 104-quad-8: Refactor to buffer states for CMR, IOR, and IDR
  counter: 104-quad-8: Utilize bitfield access macros
  tools/counter: Makefile: Remove lingering 'include' directories on make clean
  tools/counter: Add .gitignore
  counter: stm32-timer-cnt: Reset TIM_TISEL to its default value in probe
  counter: 104-quad-8: Remove reference in Kconfig to 25-bit counter value
This commit is contained in:
Greg Kroah-Hartman 2023-06-15 13:07:59 +02:00
commit e04b1bff33
12 changed files with 1007 additions and 367 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

54
Documentation/ABI/testing/sysfs-bus-counter
View File

@ -90,6 +90,60 @@ Description:
counter does not freeze at the boundary points, but
counts continuously throughout.
interrupt on terminal count:
The output signal is initially low, and will remain low
until the counter reaches zero. The output signal then
goes high and remains high until a new preset value is
set.
hardware retriggerable one-shot:
The output signal is initially high. The output signal
will go low by a trigger input signal, and will remain
low until the counter reaches zero. The output will then
go high and remain high until the next trigger. A
trigger results in loading the counter to the preset
value and setting the output signal low, thus starting
the one-shot pulse.
rate generator:
The output signal is initially high. When the counter
has decremented to 1, the output signal goes low for one
clock pulse. The output signal then goes high again, the
counter is reloaded to the preset value, and the process
repeats in a periodic manner as such.
square wave mode:
The output signal is initially high.
If the initial count is even, the counter is decremented
by two on succeeding clock pulses. When the count
expires, the output signal changes value and the
counter is reloaded to the preset value. The process
repeats in periodic manner as such.
If the initial count is odd, the initial count minus one
(an even number) is loaded and then is decremented by
two on succeeding clock pulses. One clock pulse after
the count expires, the output signal goes low and the
counter is reloaded to the preset value minus one.
Succeeding clock pulses decrement the count by two. When
the count expires, the output goes high again and the
counter is reloaded to the preset value minus one. The
process repeats in a periodic manner as such.
software triggered strobe:
The output signal is initially high. When the count
expires, the output will go low for one clock pulse and
then go high again. The counting sequence is "triggered"
by setting the preset value.
hardware triggered strobe:
The output signal is initially high. Counting is started
by a trigger input signal. When the count expires, the
output signal will go low for one clock pulse and then
go high again. A trigger results in loading the counter
to the preset value.
What: /sys/bus/counter/devices/counterX/countY/count_mode_available
What: /sys/bus/counter/devices/counterX/countY/error_noise_available
What: /sys/bus/counter/devices/counterX/countY/function_available

7
MAINTAINERS
View File

@ -10260,6 +10260,13 @@ L: linux-fbdev@vger.kernel.org
S: Maintained
F: drivers/video/fbdev/i810/
INTEL 8254 COUNTER DRIVER
M: William Breathitt Gray <william.gray@linaro.org>
L: linux-iio@vger.kernel.org
S: Maintained
F: drivers/counter/i8254.c
F: include/linux/i8254.h
INTEL 8255 GPIO DRIVER
M: William Breathitt Gray <william.gray@linaro.org>
L: linux-gpio@vger.kernel.org

802
drivers/counter/104-quad-8.c
View File

File diff suppressed because it is too large Load Diff

22
drivers/counter/Kconfig
View File

@ -10,6 +10,21 @@ menuconfig COUNTER
interface. You only need to enable this, if you also want to enable
one or more of the counter device drivers below.
config I8254
tristate
select COUNTER
select REGMAP
help
Enables support for the i8254 interface library functions. The i8254
interface library provides functions to facilitate communication with
interfaces compatible with the venerable Intel 8254 Programmable
Interval Timer (PIT). The Intel 825x family of chips was first
released in the early 1980s but compatible interfaces are nowadays
typically found embedded in larger VLSI processing chips and FPGA
components.
If built as a module its name will be i8254.
if COUNTER
config 104_QUAD_8
@ -17,14 +32,15 @@ config 104_QUAD_8
depends on (PC104 && X86) || COMPILE_TEST
depends on HAS_IOPORT_MAP
select ISA_BUS_API
select REGMAP_MMIO
help
Say yes here to build support for the ACCES 104-QUAD-8 quadrature
encoder counter/interface device family (104-QUAD-8, 104-QUAD-4).
A counter's respective error flag may be cleared by performing a write
operation on the respective count value attribute. Although the
104-QUAD-8 counters have a 25-bit range, only the lower 24 bits may be
set, either directly or via the counter's preset attribute.
operation on the respective count value attribute. The 104-QUAD-8
counters may be set either directly or via the counter's preset
attribute.
The base port addresses for the devices may be configured via the base
array module parameter. The interrupt line numbers for the devices may

1
drivers/counter/Makefile
View File

@ -6,6 +6,7 @@
obj-$(CONFIG_COUNTER) += counter.o
counter-y := counter-core.o counter-sysfs.o counter-chrdev.o
obj-$(CONFIG_I8254) += i8254.o
obj-$(CONFIG_104_QUAD_8) += 104-quad-8.o
obj-$(CONFIG_INTERRUPT_CNT) += interrupt-cnt.o
obj-$(CONFIG_RZ_MTU3_CNT) += rz-mtu3-cnt.o

8
drivers/counter/counter-sysfs.c
View File

@ -88,7 +88,13 @@ static const char *const counter_count_mode_str[] = {
[COUNTER_COUNT_MODE_NORMAL] = "normal",
[COUNTER_COUNT_MODE_RANGE_LIMIT] = "range limit",
[COUNTER_COUNT_MODE_NON_RECYCLE] = "non-recycle",
[COUNTER_COUNT_MODE_MODULO_N] = "modulo-n"
[COUNTER_COUNT_MODE_MODULO_N] = "modulo-n",
[COUNTER_COUNT_MODE_INTERRUPT_ON_TERMINAL_COUNT] = "interrupt on terminal count",
[COUNTER_COUNT_MODE_HARDWARE_RETRIGGERABLE_ONESHOT] = "hardware retriggerable one-shot",
[COUNTER_COUNT_MODE_RATE_GENERATOR] = "rate generator",
[COUNTER_COUNT_MODE_SQUARE_WAVE_MODE] = "square wave mode",
[COUNTER_COUNT_MODE_SOFTWARE_TRIGGERED_STROBE] = "software triggered strobe",
[COUNTER_COUNT_MODE_HARDWARE_TRIGGERED_STROBE] = "hardware triggered strobe",
};
static const char *const counter_signal_polarity_str[] = {

447
drivers/counter/i8254.c Normal file
View File

@ -0,0 +1,447 @@
// SPDX-License-Identifier: GPL-2.0
/*
* Intel 8254 Programmable Interval Timer
* Copyright (C) William Breathitt Gray
*/
#include <linux/bitfield.h>
#include <linux/bits.h>
#include <linux/counter.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/export.h>
#include <linux/i8254.h>
#include <linux/limits.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/regmap.h>
#include <asm/unaligned.h>
#define I8254_COUNTER_REG(_counter) (_counter)
#define I8254_CONTROL_REG 0x3
#define I8254_SC GENMASK(7, 6)
#define I8254_RW GENMASK(5, 4)
#define I8254_M GENMASK(3, 1)
#define I8254_CONTROL(_sc, _rw, _m) \
(u8_encode_bits(_sc, I8254_SC) | u8_encode_bits(_rw, I8254_RW) | \
u8_encode_bits(_m, I8254_M))
#define I8254_RW_TWO_BYTE 0x3
#define I8254_MODE_INTERRUPT_ON_TERMINAL_COUNT 0
#define I8254_MODE_HARDWARE_RETRIGGERABLE_ONESHOT 1
#define I8254_MODE_RATE_GENERATOR 2
#define I8254_MODE_SQUARE_WAVE_MODE 3
#define I8254_MODE_SOFTWARE_TRIGGERED_STROBE 4
#define I8254_MODE_HARDWARE_TRIGGERED_STROBE 5
#define I8254_COUNTER_LATCH(_counter) I8254_CONTROL(_counter, 0x0, 0x0)
#define I8254_PROGRAM_COUNTER(_counter, _mode) I8254_CONTROL(_counter, I8254_RW_TWO_BYTE, _mode)
#define I8254_NUM_COUNTERS 3
/**
* struct i8254 - I8254 device private data structure
* @lock: synchronization lock to prevent I/O race conditions
* @preset: array of Counter Register states
* @out_mode: array of mode configuration states
* @map: Regmap for the device
*/
struct i8254 {
struct mutex lock;
u16 preset[I8254_NUM_COUNTERS];
u8 out_mode[I8254_NUM_COUNTERS];
struct regmap *map;
};
static int i8254_count_read(struct counter_device *const counter, struct counter_count *const count,
u64 *const val)
{
struct i8254 *const priv = counter_priv(counter);
int ret;
u8 value[2];
mutex_lock(&priv->lock);
ret = regmap_write(priv->map, I8254_CONTROL_REG, I8254_COUNTER_LATCH(count->id));
if (ret) {
mutex_unlock(&priv->lock);
return ret;
}
ret = regmap_noinc_read(priv->map, I8254_COUNTER_REG(count->id), value, sizeof(value));
if (ret) {
mutex_unlock(&priv->lock);
return ret;
}
mutex_unlock(&priv->lock);
*val = get_unaligned_le16(value);
return ret;
}
static int i8254_function_read(struct counter_device *const counter,
struct counter_count *const count,
enum counter_function *const function)
{
*function = COUNTER_FUNCTION_DECREASE;
return 0;
}
#define I8254_SYNAPSES_PER_COUNT 2
#define I8254_SIGNAL_ID_CLK 0
#define I8254_SIGNAL_ID_GATE 1
static int i8254_action_read(struct counter_device *const counter,
struct counter_count *const count,
struct counter_synapse *const synapse,
enum counter_synapse_action *const action)
{
struct i8254 *const priv = counter_priv(counter);
switch (synapse->signal->id % I8254_SYNAPSES_PER_COUNT) {
case I8254_SIGNAL_ID_CLK:
*action = COUNTER_SYNAPSE_ACTION_FALLING_EDGE;
return 0;
case I8254_SIGNAL_ID_GATE:
switch (priv->out_mode[count->id]) {
case I8254_MODE_HARDWARE_RETRIGGERABLE_ONESHOT:
case I8254_MODE_RATE_GENERATOR:
case I8254_MODE_SQUARE_WAVE_MODE:
case I8254_MODE_HARDWARE_TRIGGERED_STROBE:
*action = COUNTER_SYNAPSE_ACTION_RISING_EDGE;
return 0;
default:
*action = COUNTER_SYNAPSE_ACTION_NONE;
return 0;
}
default:
/* should never reach this path */
return -EINVAL;
}
}
static int i8254_count_ceiling_read(struct counter_device *const counter,
struct counter_count *const count, u64 *const ceiling)
{
struct i8254 *const priv = counter_priv(counter);
mutex_lock(&priv->lock);
switch (priv->out_mode[count->id]) {
case I8254_MODE_RATE_GENERATOR:
/* Rate Generator decrements 0 by one and the counter "wraps around" */
*ceiling = (priv->preset[count->id] == 0) ? U16_MAX : priv->preset[count->id];
break;
case I8254_MODE_SQUARE_WAVE_MODE:
if (priv->preset[count->id] % 2)
*ceiling = priv->preset[count->id] - 1;
else if (priv->preset[count->id] == 0)
/* Square Wave Mode decrements 0 by two and the counter "wraps around" */
*ceiling = U16_MAX - 1;
else
*ceiling = priv->preset[count->id];
break;
default:
*ceiling = U16_MAX;
break;
}
mutex_unlock(&priv->lock);
return 0;
}
static int i8254_count_mode_read(struct counter_device *const counter,
struct counter_count *const count,
enum counter_count_mode *const count_mode)
{
const struct i8254 *const priv = counter_priv(counter);
switch (priv->out_mode[count->id]) {
case I8254_MODE_INTERRUPT_ON_TERMINAL_COUNT:
*count_mode = COUNTER_COUNT_MODE_INTERRUPT_ON_TERMINAL_COUNT;
return 0;
case I8254_MODE_HARDWARE_RETRIGGERABLE_ONESHOT:
*count_mode = COUNTER_COUNT_MODE_HARDWARE_RETRIGGERABLE_ONESHOT;
return 0;
case I8254_MODE_RATE_GENERATOR:
*count_mode = COUNTER_COUNT_MODE_RATE_GENERATOR;
return 0;
case I8254_MODE_SQUARE_WAVE_MODE:
*count_mode = COUNTER_COUNT_MODE_SQUARE_WAVE_MODE;
return 0;
case I8254_MODE_SOFTWARE_TRIGGERED_STROBE:
*count_mode = COUNTER_COUNT_MODE_SOFTWARE_TRIGGERED_STROBE;
return 0;
case I8254_MODE_HARDWARE_TRIGGERED_STROBE:
*count_mode = COUNTER_COUNT_MODE_HARDWARE_TRIGGERED_STROBE;
return 0;
default:
/* should never reach this path */
return -EINVAL;
}
}
static int i8254_count_mode_write(struct counter_device *const counter,
struct counter_count *const count,
const enum counter_count_mode count_mode)
{
struct i8254 *const priv = counter_priv(counter);
u8 out_mode;
int ret;
switch (count_mode) {
case COUNTER_COUNT_MODE_INTERRUPT_ON_TERMINAL_COUNT:
out_mode = I8254_MODE_INTERRUPT_ON_TERMINAL_COUNT;
break;
case COUNTER_COUNT_MODE_HARDWARE_RETRIGGERABLE_ONESHOT:
out_mode = I8254_MODE_HARDWARE_RETRIGGERABLE_ONESHOT;
break;
case COUNTER_COUNT_MODE_RATE_GENERATOR:
out_mode = I8254_MODE_RATE_GENERATOR;
break;
case COUNTER_COUNT_MODE_SQUARE_WAVE_MODE:
out_mode = I8254_MODE_SQUARE_WAVE_MODE;
break;
case COUNTER_COUNT_MODE_SOFTWARE_TRIGGERED_STROBE:
out_mode = I8254_MODE_SOFTWARE_TRIGGERED_STROBE;
break;
case COUNTER_COUNT_MODE_HARDWARE_TRIGGERED_STROBE:
out_mode = I8254_MODE_HARDWARE_TRIGGERED_STROBE;
break;
default:
/* should never reach this path */
return -EINVAL;
}
mutex_lock(&priv->lock);
/* Counter Register is cleared when the counter is programmed */
priv->preset[count->id] = 0;
priv->out_mode[count->id] = out_mode;
ret = regmap_write(priv->map, I8254_CONTROL_REG,
I8254_PROGRAM_COUNTER(count->id, out_mode));
mutex_unlock(&priv->lock);
return ret;
}
static int i8254_count_floor_read(struct counter_device *const counter,
struct counter_count *const count, u64 *const floor)
{
struct i8254 *const priv = counter_priv(counter);
mutex_lock(&priv->lock);
switch (priv->out_mode[count->id]) {
case I8254_MODE_RATE_GENERATOR:
/* counter is always reloaded after 1, but 0 is a possible reload value */
*floor = (priv->preset[count->id] == 0) ? 0 : 1;
break;
case I8254_MODE_SQUARE_WAVE_MODE:
/* counter is always reloaded after 2 for even preset values */
*floor = (priv->preset[count->id] % 2 || priv->preset[count->id] == 0) ? 0 : 2;
break;
default:
*floor = 0;
break;
}
mutex_unlock(&priv->lock);
return 0;
}
static int i8254_count_preset_read(struct counter_device *const counter,
struct counter_count *const count, u64 *const preset)
{
const struct i8254 *const priv = counter_priv(counter);
*preset = priv->preset[count->id];
return 0;
}
static int i8254_count_preset_write(struct counter_device *const counter,
struct counter_count *const count, const u64 preset)
{
struct i8254 *const priv = counter_priv(counter);
int ret;
u8 value[2];
if (preset > U16_MAX)
return -ERANGE;
mutex_lock(&priv->lock);
if (priv->out_mode[count->id] == I8254_MODE_RATE_GENERATOR ||
priv->out_mode[count->id] == I8254_MODE_SQUARE_WAVE_MODE) {
if (preset == 1) {
mutex_unlock(&priv->lock);
return -EINVAL;
}
}
priv->preset[count->id] = preset;
put_unaligned_le16(preset, value);
ret = regmap_noinc_write(priv->map, I8254_COUNTER_REG(count->id), value, 2);
mutex_unlock(&priv->lock);
return ret;
}
static int i8254_init_hw(struct regmap *const map)
{
unsigned long i;
int ret;
for (i = 0; i < I8254_NUM_COUNTERS; i++) {
/* Initialize each counter to Mode 0 */
ret = regmap_write(map, I8254_CONTROL_REG,
I8254_PROGRAM_COUNTER(i, I8254_MODE_INTERRUPT_ON_TERMINAL_COUNT));
if (ret)
return ret;
}
return 0;
}
static const struct counter_ops i8254_ops = {
.count_read = i8254_count_read,
.function_read = i8254_function_read,
.action_read = i8254_action_read,
};
#define I8254_SIGNAL(_id, _name) { \
.id = (_id), \
.name = (_name), \
}
static struct counter_signal i8254_signals[] = {
I8254_SIGNAL(0, "CLK 0"), I8254_SIGNAL(1, "GATE 0"),
I8254_SIGNAL(2, "CLK 1"), I8254_SIGNAL(3, "GATE 1"),
I8254_SIGNAL(4, "CLK 2"), I8254_SIGNAL(5, "GATE 2"),
};
static const enum counter_synapse_action i8254_clk_actions[] = {
COUNTER_SYNAPSE_ACTION_FALLING_EDGE,
};
static const enum counter_synapse_action i8254_gate_actions[] = {
COUNTER_SYNAPSE_ACTION_NONE,
COUNTER_SYNAPSE_ACTION_RISING_EDGE,
};
#define I8254_SYNAPSES_BASE(_id) ((_id) * I8254_SYNAPSES_PER_COUNT)
#define I8254_SYNAPSE_CLK(_id) { \
.actions_list = i8254_clk_actions, \
.num_actions = ARRAY_SIZE(i8254_clk_actions), \
.signal = &i8254_signals[I8254_SYNAPSES_BASE(_id) + 0], \
}
#define I8254_SYNAPSE_GATE(_id) { \
.actions_list = i8254_gate_actions, \
.num_actions = ARRAY_SIZE(i8254_gate_actions), \
.signal = &i8254_signals[I8254_SYNAPSES_BASE(_id) + 1], \
}
static struct counter_synapse i8254_synapses[] = {
I8254_SYNAPSE_CLK(0), I8254_SYNAPSE_GATE(0),
I8254_SYNAPSE_CLK(1), I8254_SYNAPSE_GATE(1),
I8254_SYNAPSE_CLK(2), I8254_SYNAPSE_GATE(2),
};
static const enum counter_function i8254_functions_list[] = {
COUNTER_FUNCTION_DECREASE,
};
static const enum counter_count_mode i8254_count_modes[] = {
COUNTER_COUNT_MODE_INTERRUPT_ON_TERMINAL_COUNT,
COUNTER_COUNT_MODE_HARDWARE_RETRIGGERABLE_ONESHOT,
COUNTER_COUNT_MODE_RATE_GENERATOR,
COUNTER_COUNT_MODE_SQUARE_WAVE_MODE,
COUNTER_COUNT_MODE_SOFTWARE_TRIGGERED_STROBE,
COUNTER_COUNT_MODE_HARDWARE_TRIGGERED_STROBE,
};
static DEFINE_COUNTER_AVAILABLE(i8254_count_modes_available, i8254_count_modes);
static struct counter_comp i8254_count_ext[] = {
COUNTER_COMP_CEILING(i8254_count_ceiling_read, NULL),
COUNTER_COMP_COUNT_MODE(i8254_count_mode_read, i8254_count_mode_write,
i8254_count_modes_available),
COUNTER_COMP_FLOOR(i8254_count_floor_read, NULL),
COUNTER_COMP_PRESET(i8254_count_preset_read, i8254_count_preset_write),
};
#define I8254_COUNT(_id, _name) { \
.id = (_id), \
.name = (_name), \
.functions_list = i8254_functions_list, \
.num_functions = ARRAY_SIZE(i8254_functions_list), \
.synapses = &i8254_synapses[I8254_SYNAPSES_BASE(_id)], \
.num_synapses = I8254_SYNAPSES_PER_COUNT, \
.ext = i8254_count_ext, \
.num_ext = ARRAY_SIZE(i8254_count_ext) \
}
static struct counter_count i8254_counts[I8254_NUM_COUNTERS] = {
I8254_COUNT(0, "Counter 0"), I8254_COUNT(1, "Counter 1"), I8254_COUNT(2, "Counter 2"),
};
/**
* devm_i8254_regmap_register - Register an i8254 Counter device
* @dev: device that is registering this i8254 Counter device
* @config: configuration for i8254_regmap_config
*
* Registers an Intel 8254 Programmable Interval Timer Counter device. Returns 0 on success and
* negative error number on failure.
*/
int devm_i8254_regmap_register(struct device *const dev,
const struct i8254_regmap_config *const config)
{
struct counter_device *counter;
struct i8254 *priv;
int err;
if (!config->parent)
return -EINVAL;
if (!config->map)
return -EINVAL;
counter = devm_counter_alloc(dev, sizeof(*priv));
if (!counter)
return -ENOMEM;
priv = counter_priv(counter);
priv->map = config->map;
counter->name = dev_name(config->parent);
counter->parent = config->parent;
counter->ops = &i8254_ops;
counter->counts = i8254_counts;
counter->num_counts = ARRAY_SIZE(i8254_counts);
counter->signals = i8254_signals;
counter->num_signals = ARRAY_SIZE(i8254_signals);
mutex_init(&priv->lock);
err = i8254_init_hw(priv->map);
if (err)
return err;
err = devm_counter_add(dev, counter);
if (err < 0)
return dev_err_probe(dev, err, "Failed to add counter\n");
return 0;
}
EXPORT_SYMBOL_NS_GPL(devm_i8254_regmap_register, I8254);
MODULE_AUTHOR("William Breathitt Gray");
MODULE_DESCRIPTION("Intel 8254 Programmable Interval Timer");
MODULE_LICENSE("GPL");
MODULE_IMPORT_NS(COUNTER);

3
drivers/counter/stm32-timer-cnt.c
View File

@ -342,6 +342,9 @@ static int stm32_timer_cnt_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, priv);
/* Reset input selector to its default input */
regmap_write(priv->regmap, TIM_TISEL, 0x0);
/* Register Counter device */
ret = devm_counter_add(dev, counter);
if (ret < 0)

21
include/linux/i8254.h Normal file
View File

@ -0,0 +1,21 @@
/* SPDX-License-Identifier: GPL-2.0 */
/* Copyright (C) William Breathitt Gray */
#ifndef _I8254_H_
#define _I8254_H_
struct device;
struct regmap;
/**
* struct i8254_regmap_config - Configuration for the register map of an i8254
* @parent: parent device
* @map: regmap for the i8254
*/
struct i8254_regmap_config {
struct device *parent;
struct regmap *map;
};
int devm_i8254_regmap_register(struct device *dev, const struct i8254_regmap_config *config);
#endif /* _I8254_H_ */

6
include/uapi/linux/counter.h
View File

@ -127,6 +127,12 @@ enum counter_count_mode {
COUNTER_COUNT_MODE_RANGE_LIMIT,
COUNTER_COUNT_MODE_NON_RECYCLE,
COUNTER_COUNT_MODE_MODULO_N,
COUNTER_COUNT_MODE_INTERRUPT_ON_TERMINAL_COUNT,
COUNTER_COUNT_MODE_HARDWARE_RETRIGGERABLE_ONESHOT,
COUNTER_COUNT_MODE_RATE_GENERATOR,
COUNTER_COUNT_MODE_SQUARE_WAVE_MODE,
COUNTER_COUNT_MODE_SOFTWARE_TRIGGERED_STROBE,
COUNTER_COUNT_MODE_HARDWARE_TRIGGERED_STROBE,
};
/* Count function values */

2
tools/counter/.gitignore vendored Normal file
View File

@ -0,0 +1,2 @@
/counter_example
/include/linux/counter.h

1
tools/counter/Makefile
View File

@ -40,6 +40,7 @@ $(OUTPUT)counter_example: $(COUNTER_EXAMPLE)
clean:
rm -f $(ALL_PROGRAMS)
rm -rf $(OUTPUT)include/linux/counter.h
rmdir -p $(OUTPUT)include/linux
find $(or $(OUTPUT),.) -name '*.o' -delete -o -name '\.*.d' -delete
install: $(ALL_PROGRAMS)