mirror of
https://github.com/torvalds/linux.git
synced 2024-11-11 14:42:24 +00:00
Bluetooth: Add support for Intel Bluetooth device [8087:07dc]
This patch adds support for Intel Bluetooth device by adding btusb_setup_intel() routine that update the device with ROM patch. T: Bus=02 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=8087 ProdID=07dc Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Acked-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
This commit is contained in:
Tedd Ho-Jeong An
Gustavo Padovan
parent
c73eee9172
commit
dffd30ee96
@ -23,6 +23,7 @@
|
||||
|
||||
#include <linux/module.h>
|
||||
#include <linux/usb.h>
|
||||
#include <linux/firmware.h>
|
||||
|
||||
#include <net/bluetooth/bluetooth.h>
|
||||
#include <net/bluetooth/hci_core.h>
|
||||
@ -47,6 +48,7 @@ static struct usb_driver btusb_driver;
|
||||
#define BTUSB_BROKEN_ISOC 0x20
|
||||
#define BTUSB_WRONG_SCO_MTU 0x40
|
||||
#define BTUSB_ATH3012 0x80
|
||||
#define BTUSB_INTEL 0x100
|
||||
|
||||
static struct usb_device_id btusb_table[] = {
|
||||
/* Generic Bluetooth USB device */
|
||||
@ -207,6 +209,9 @@ static struct usb_device_id blacklist_table[] = {
|
||||
/* Frontline ComProbe Bluetooth Sniffer */
|
||||
{ USB_DEVICE(0x16d3, 0x0002), .driver_info = BTUSB_SNIFFER },
|
||||
|
||||
/* Intel Bluetooth device */
|
||||
{ USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL },
|
||||
|
||||
{ } /* Terminating entry */
|
||||
};
|
||||
|
||||
@ -943,6 +948,375 @@ static int btusb_setup_bcm92035(struct hci_dev *hdev)
|
||||
return 0;
|
||||
}
|
||||
|
||||
struct intel_version {
|
||||
u8 status;
|
||||
u8 hw_platform;
|
||||
u8 hw_variant;
|
||||
u8 hw_revision;
|
||||
u8 fw_variant;
|
||||
u8 fw_revision;
|
||||
u8 fw_build_num;
|
||||
u8 fw_build_ww;
|
||||
u8 fw_build_yy;
|
||||
u8 fw_patch_num;
|
||||
} __packed;
|
||||
|
||||
static const struct firmware *btusb_setup_intel_get_fw(struct hci_dev *hdev,
|
||||
struct intel_version *ver)
|
||||
{
|
||||
const struct firmware *fw;
|
||||
char fwname[64];
|
||||
int ret;
|
||||
|
||||
snprintf(fwname, sizeof(fwname),
|
||||
"intel/ibt-hw-%x.%x.%x-fw-%x.%x.%x.%x.%x.bseq",
|
||||
ver->hw_platform, ver->hw_variant, ver->hw_revision,
|
||||
ver->fw_variant, ver->fw_revision, ver->fw_build_num,
|
||||
ver->fw_build_ww, ver->fw_build_yy);
|
||||
|
||||
ret = request_firmware(&fw, fwname, &hdev->dev);
|
||||
if (ret < 0) {
|
||||
if (ret == -EINVAL) {
|
||||
BT_ERR("%s Intel firmware file request failed (%d)",
|
||||
hdev->name, ret);
|
||||
return NULL;
|
||||
}
|
||||
|
||||
BT_ERR("%s failed to open Intel firmware file: %s(%d)",
|
||||
hdev->name, fwname, ret);
|
||||
|
||||
/* If the correct firmware patch file is not found, use the
|
||||
* default firmware patch file instead
|
||||
*/
|
||||
snprintf(fwname, sizeof(fwname), "intel/ibt-hw-%x.%x.bseq",
|
||||
ver->hw_platform, ver->hw_variant);
|
||||
if (request_firmware(&fw, fwname, &hdev->dev) < 0) {
|
||||
BT_ERR("%s failed to open default Intel fw file: %s",
|
||||
hdev->name, fwname);
|
||||
return NULL;
|
||||
}
|
||||
}
|
||||
|
||||
BT_INFO("%s: Intel Bluetooth firmware file: %s", hdev->name, fwname);
|
||||
|
||||
return fw;
|
||||
}
|
||||
|
||||
static int btusb_setup_intel_patching(struct hci_dev *hdev,
|
||||
const struct firmware *fw,
|
||||
const u8 **fw_ptr, int *disable_patch)
|
||||
{
|
||||
struct sk_buff *skb;
|
||||
struct hci_command_hdr *cmd;
|
||||
const u8 *cmd_param;
|
||||
struct hci_event_hdr *evt = NULL;
|
||||
const u8 *evt_param = NULL;
|
||||
int remain = fw->size - (*fw_ptr - fw->data);
|
||||
|
||||
/* The first byte indicates the types of the patch command or event.
|
||||
* 0x01 means HCI command and 0x02 is HCI event. If the first bytes
|
||||
* in the current firmware buffer doesn't start with 0x01 or
|
||||
* the size of remain buffer is smaller than HCI command header,
|
||||
* the firmware file is corrupted and it should stop the patching
|
||||
* process.
|
||||
*/
|
||||
if (remain > HCI_COMMAND_HDR_SIZE && *fw_ptr[0] != 0x01) {
|
||||
BT_ERR("%s Intel fw corrupted: invalid cmd read", hdev->name);
|
||||
return -EINVAL;
|
||||
}
|
||||
(*fw_ptr)++;
|
||||
remain--;
|
||||
|
||||
cmd = (struct hci_command_hdr *)(*fw_ptr);
|
||||
*fw_ptr += sizeof(*cmd);
|
||||
remain -= sizeof(*cmd);
|
||||
|
||||
/* Ensure that the remain firmware data is long enough than the length
|
||||
* of command parameter. If not, the firmware file is corrupted.
|
||||
*/
|
||||
if (remain < cmd->plen) {
|
||||
BT_ERR("%s Intel fw corrupted: invalid cmd len", hdev->name);
|
||||
return -EFAULT;
|
||||
}
|
||||
|
||||
/* If there is a command that loads a patch in the firmware
|
||||
* file, then enable the patch upon success, otherwise just
|
||||
* disable the manufacturer mode, for example patch activation
|
||||
* is not required when the default firmware patch file is used
|
||||
* because there are no patch data to load.
|
||||
*/
|
||||
if (*disable_patch && le16_to_cpu(cmd->opcode) == 0xfc8e)
|
||||
*disable_patch = 0;
|
||||
|
||||
cmd_param = *fw_ptr;
|
||||
*fw_ptr += cmd->plen;
|
||||
remain -= cmd->plen;
|
||||
|
||||
/* This reads the expected events when the above command is sent to the
|
||||
* device. Some vendor commands expects more than one events, for
|
||||
* example command status event followed by vendor specific event.
|
||||
* For this case, it only keeps the last expected event. so the command
|
||||
* can be sent with __hci_cmd_sync_ev() which returns the sk_buff of
|
||||
* last expected event.
|
||||
*/
|
||||
while (remain > HCI_EVENT_HDR_SIZE && *fw_ptr[0] == 0x02) {
|
||||
(*fw_ptr)++;
|
||||
remain--;
|
||||
|
||||
evt = (struct hci_event_hdr *)(*fw_ptr);
|
||||
*fw_ptr += sizeof(*evt);
|
||||
remain -= sizeof(*evt);
|
||||
|
||||
if (remain < evt->plen) {
|
||||
BT_ERR("%s Intel fw corrupted: invalid evt len",
|
||||
hdev->name);
|
||||
return -EFAULT;
|
||||
}
|
||||
|
||||
evt_param = *fw_ptr;
|
||||
*fw_ptr += evt->plen;
|
||||
remain -= evt->plen;
|
||||
}
|
||||
|
||||
/* Every HCI commands in the firmware file has its correspond event.
|
||||
* If event is not found or remain is smaller than zero, the firmware
|
||||
* file is corrupted.
|
||||
*/
|
||||
if (!evt || !evt_param || remain < 0) {
|
||||
BT_ERR("%s Intel fw corrupted: invalid evt read", hdev->name);
|
||||
return -EFAULT;
|
||||
}
|
||||
|
||||
skb = __hci_cmd_sync_ev(hdev, le16_to_cpu(cmd->opcode), cmd->plen,
|
||||
cmd_param, evt->evt, HCI_INIT_TIMEOUT);
|
||||
if (IS_ERR(skb)) {
|
||||
BT_ERR("%s sending Intel patch command (0x%4.4x) failed (%ld)",
|
||||
hdev->name, cmd->opcode, PTR_ERR(skb));
|
||||
return -PTR_ERR(skb);
|
||||
}
|
||||
|
||||
/* It ensures that the returned event matches the event data read from
|
||||
* the firmware file. At fist, it checks the length and then
|
||||
* the contents of the event.
|
||||
*/
|
||||
if (skb->len != evt->plen) {
|
||||
BT_ERR("%s mismatch event length (opcode 0x%4.4x)", hdev->name,
|
||||
le16_to_cpu(cmd->opcode));
|
||||
kfree_skb(skb);
|
||||
return -EFAULT;
|
||||
}
|
||||
|
||||
if (memcmp(skb->data, evt_param, evt->plen)) {
|
||||
BT_ERR("%s mismatch event parameter (opcode 0x%4.4x)",
|
||||
hdev->name, le16_to_cpu(cmd->opcode));
|
||||
kfree_skb(skb);
|
||||
return -EFAULT;
|
||||
}
|
||||
kfree_skb(skb);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int btusb_setup_intel(struct hci_dev *hdev)
|
||||
{
|
||||
struct sk_buff *skb;
|
||||
const struct firmware *fw;
|
||||
const u8 *fw_ptr;
|
||||
int disable_patch;
|
||||
struct intel_version *ver;
|
||||
|
||||
const u8 mfg_enable[] = { 0x01, 0x00 };
|
||||
const u8 mfg_disable[] = { 0x00, 0x00 };
|
||||
const u8 mfg_reset_deactivate[] = { 0x00, 0x01 };
|
||||
const u8 mfg_reset_activate[] = { 0x00, 0x02 };
|
||||
|
||||
BT_DBG("%s", hdev->name);
|
||||
|
||||
/* The controller has a bug with the first HCI command sent to it
|
||||
* returning number of completed commands as zero. This would stall the
|
||||
* command processing in the Bluetooth core.
|
||||
*
|
||||
* As a workaround, send HCI Reset command first which will reset the
|
||||
* number of completed commands and allow normal command processing
|
||||
* from now on.
|
||||
*/
|
||||
skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
|
||||
if (IS_ERR(skb)) {
|
||||
BT_ERR("%s sending initial HCI reset command failed (%ld)",
|
||||
hdev->name, PTR_ERR(skb));
|
||||
return -PTR_ERR(skb);
|
||||
}
|
||||
kfree_skb(skb);
|
||||
|
||||
/* Read Intel specific controller version first to allow selection of
|
||||
* which firmware file to load.
|
||||
*
|
||||
* The returned information are hardware variant and revision plus
|
||||
* firmware variant, revision and build number.
|
||||
*/
|
||||
skb = __hci_cmd_sync(hdev, 0xfc05, 0, NULL, HCI_INIT_TIMEOUT);
|
||||
if (IS_ERR(skb)) {
|
||||
BT_ERR("%s reading Intel fw version command failed (%ld)",
|
||||
hdev->name, PTR_ERR(skb));
|
||||
return -PTR_ERR(skb);
|
||||
}
|
||||
|
||||
if (skb->len != sizeof(*ver)) {
|
||||
BT_ERR("%s Intel version event length mismatch", hdev->name);
|
||||
kfree_skb(skb);
|
||||
return -EIO;
|
||||
}
|
||||
|
||||
ver = (struct intel_version *)skb->data;
|
||||
if (ver->status) {
|
||||
BT_ERR("%s Intel fw version event failed (%02x)", hdev->name,
|
||||
ver->status);
|
||||
kfree_skb(skb);
|
||||
return -bt_to_errno(ver->status);
|
||||
}
|
||||
|
||||
BT_INFO("%s: read Intel version: %02x%02x%02x%02x%02x%02x%02x%02x%02x",
|
||||
hdev->name, ver->hw_platform, ver->hw_variant,
|
||||
ver->hw_revision, ver->fw_variant, ver->fw_revision,
|
||||
ver->fw_build_num, ver->fw_build_ww, ver->fw_build_yy,
|
||||
ver->fw_patch_num);
|
||||
|
||||
/* fw_patch_num indicates the version of patch the device currently
|
||||
* have. If there is no patch data in the device, it is always 0x00.
|
||||
* So, if it is other than 0x00, no need to patch the deivce again.
|
||||
*/
|
||||
if (ver->fw_patch_num) {
|
||||
BT_INFO("%s: Intel device is already patched. patch num: %02x",
|
||||
hdev->name, ver->fw_patch_num);
|
||||
kfree_skb(skb);
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* Opens the firmware patch file based on the firmware version read
|
||||
* from the controller. If it fails to open the matching firmware
|
||||
* patch file, it tries to open the default firmware patch file.
|
||||
* If no patch file is found, allow the device to operate without
|
||||
* a patch.
|
||||
*/
|
||||
fw = btusb_setup_intel_get_fw(hdev, ver);
|
||||
if (!fw) {
|
||||
kfree_skb(skb);
|
||||
return 0;
|
||||
}
|
||||
fw_ptr = fw->data;
|
||||
|
||||
/* This Intel specific command enables the manufacturer mode of the
|
||||
* controller.
|
||||
*
|
||||
* Only while this mode is enabled, the driver can download the
|
||||
* firmware patch data and configuration parameters.
|
||||
*/
|
||||
skb = __hci_cmd_sync(hdev, 0xfc11, 2, mfg_enable, HCI_INIT_TIMEOUT);
|
||||
if (IS_ERR(skb)) {
|
||||
BT_ERR("%s entering Intel manufacturer mode failed (%ld)",
|
||||
hdev->name, PTR_ERR(skb));
|
||||
release_firmware(fw);
|
||||
return -PTR_ERR(skb);
|
||||
}
|
||||
|
||||
if (skb->data[0]) {
|
||||
u8 evt_status = skb->data[0];
|
||||
BT_ERR("%s enable Intel manufacturer mode event failed (%02x)",
|
||||
hdev->name, evt_status);
|
||||
kfree_skb(skb);
|
||||
release_firmware(fw);
|
||||
return -bt_to_errno(evt_status);
|
||||
}
|
||||
kfree_skb(skb);
|
||||
|
||||
disable_patch = 1;
|
||||
|
||||
/* The firmware data file consists of list of Intel specific HCI
|
||||
* commands and its expected events. The first byte indicates the
|
||||
* type of the message, either HCI command or HCI event.
|
||||
*
|
||||
* It reads the command and its expected event from the firmware file,
|
||||
* and send to the controller. Once __hci_cmd_sync_ev() returns,
|
||||
* the returned event is compared with the event read from the firmware
|
||||
* file and it will continue until all the messages are downloaded to
|
||||
* the controller.
|
||||
*
|
||||
* Once the firmware patching is completed successfully,
|
||||
* the manufacturer mode is disabled with reset and activating the
|
||||
* downloaded patch.
|
||||
*
|
||||
* If the firmware patching fails, the manufacturer mode is
|
||||
* disabled with reset and deactivating the patch.
|
||||
*
|
||||
* If the default patch file is used, no reset is done when disabling
|
||||
* the manufacturer.
|
||||
*/
|
||||
while (fw->size > fw_ptr - fw->data) {
|
||||
int ret;
|
||||
|
||||
ret = btusb_setup_intel_patching(hdev, fw, &fw_ptr,
|
||||
&disable_patch);
|
||||
if (ret < 0)
|
||||
goto exit_mfg_deactivate;
|
||||
}
|
||||
|
||||
release_firmware(fw);
|
||||
|
||||
if (disable_patch)
|
||||
goto exit_mfg_disable;
|
||||
|
||||
/* Patching completed successfully and disable the manufacturer mode
|
||||
* with reset and activate the downloaded firmware patches.
|
||||
*/
|
||||
skb = __hci_cmd_sync(hdev, 0xfc11, sizeof(mfg_reset_activate),
|
||||
mfg_reset_activate, HCI_INIT_TIMEOUT);
|
||||
if (IS_ERR(skb)) {
|
||||
BT_ERR("%s exiting Intel manufacturer mode failed (%ld)",
|
||||
hdev->name, PTR_ERR(skb));
|
||||
return -PTR_ERR(skb);
|
||||
}
|
||||
kfree_skb(skb);
|
||||
|
||||
BT_INFO("%s: Intel Bluetooth firmware patch completed and activated",
|
||||
hdev->name);
|
||||
|
||||
return 0;
|
||||
|
||||
exit_mfg_disable:
|
||||
/* Disable the manufacturer mode without reset */
|
||||
skb = __hci_cmd_sync(hdev, 0xfc11, sizeof(mfg_disable), mfg_disable,
|
||||
HCI_INIT_TIMEOUT);
|
||||
if (IS_ERR(skb)) {
|
||||
BT_ERR("%s exiting Intel manufacturer mode failed (%ld)",
|
||||
hdev->name, PTR_ERR(skb));
|
||||
return -PTR_ERR(skb);
|
||||
}
|
||||
kfree_skb(skb);
|
||||
|
||||
BT_INFO("%s: Intel Bluetooth firmware patch completed", hdev->name);
|
||||
return 0;
|
||||
|
||||
exit_mfg_deactivate:
|
||||
release_firmware(fw);
|
||||
|
||||
/* Patching failed. Disable the manufacturer mode with reset and
|
||||
* deactivate the downloaded firmware patches.
|
||||
*/
|
||||
skb = __hci_cmd_sync(hdev, 0xfc11, sizeof(mfg_reset_deactivate),
|
||||
mfg_reset_deactivate, HCI_INIT_TIMEOUT);
|
||||
if (IS_ERR(skb)) {
|
||||
BT_ERR("%s exiting Intel manufacturer mode failed (%ld)",
|
||||
hdev->name, PTR_ERR(skb));
|
||||
return -PTR_ERR(skb);
|
||||
}
|
||||
kfree_skb(skb);
|
||||
|
||||
BT_INFO("%s: Intel Bluetooth firmware patch completed and deactivated",
|
||||
hdev->name);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int btusb_probe(struct usb_interface *intf,
|
||||
const struct usb_device_id *id)
|
||||
{
|
||||
@ -1048,6 +1422,9 @@ static int btusb_probe(struct usb_interface *intf,
|
||||
if (id->driver_info & BTUSB_BCM92035)
|
||||
hdev->setup = btusb_setup_bcm92035;
|
||||
|
||||
if (id->driver_info & BTUSB_INTEL)
|
||||
hdev->setup = btusb_setup_intel;
|
||||
|
||||
/* Interface numbers are hardcoded in the specification */
|
||||
data->isoc = usb_ifnum_to_if(data->udev, 1);
|
||||
|
||||
|
||||
Loading…
Reference in New Issue
Block a user