mirror of
https://github.com/torvalds/linux.git
synced 2024-12-24 11:51:27 +00:00
New driver to support GMT G762/G763 pwm fan controllers
Add support for DS1631, DS1721, and DS1731 to ds1621 driver Remove detect function from ds1621 driver as unreliable Bug fixes in nct6775, iio_hwmon, and adm1021 drivers Remove redundant platform_set_drvdata in various drivers Add device tree support to ina2xx driver -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) iQIcBAABAgAGBQJR0I8LAAoJEMsfJm/On5mBPp8P+wedtxZpljmca+YnuBnZnnZN 7HLFdGvbwOA+ThfYx7UhpyRgJ+D4ggB0jTiVCPHGUJzmwYjEVk5e9qZkIX/1fBIB Iun9TZdJPG+fYFkr8H91dnJcaeELog76yOvx3VRU1QYO11L1wx56oJ2b3a+lnIb5 UNyovFhvJuZ4jDpzQNUGY5/CMScj2rtPiRPT5NC/3HoSmkXFuV1uw4nhn3C79ycR NoZFyjFi7J1hCTB7ExoHHSQBGdLFDXQiEZqNaQS4WXnW1jmiTsQl0rRLoP5KqUDU 3NovVA557nOfOHAjB98nQrBM7Syn2jKYeZP+M5OR1iKIXxv5uUs/Ajmpnk5x2t1d Wf5uHW99SEDTn19U8icgOO4zLvNX0lSXHs+FC6hzKTpLp/FLVjP2uOYj9TcxtPzn pLAYsE5UIySH4ybJ0Jdf2pKA+8D2eAOVo1joFhaoz8qFjMNdSxBlf8/xOUsBaJoi dAQ/SmWc9z0Tk03Hxn1b/XVKHLbb3AIpPTe1PCK9bUBzLQyZp2UmBmSPHIVxdjO/ zyRABp64pkoVMqomJPzujEgT2NaqSfr+wwLyUOPBtmaMM8N6aOUlRjrJyOHrSrmB 3CTT23h8xp8lEgjezQ0jYlhNQPgpGmlu/yuFfL2GyqRw00clAkUem0BrstZg0EOD lepSJCaSpyqr3jfhIBwN =OdGw -----END PGP SIGNATURE----- Merge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon updates from Guenter Roeck: - new driver to support GMT G762/G763 pwm fan controllers - add support for DS1631, DS1721, and DS1731 to ds1621 driver - remove detect function from ds1621 driver as unreliable - bug fixes in nct6775, iio_hwmon, and adm1021 drivers - remove redundant platform_set_drvdata in various drivers - add device tree support to ina2xx driver * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (ds1621) Fix temperature rounding operations hwmon: (nct6775) Drop unsupported fan alarm attributes for NCT6775 hwmon: (nct6775) Fix temperature alarm attributes Add support for GMT G762/G763 PWM fan controllers hwmon: (ina2xx) Add device tree support to pass the shunt resistor hwmon: (ds1621) Update documentation hwmon: (ds1621) Add DS1731 chip support to ds1621 driver hwmon: (iio_hwmon) add alias table hwmon: (adm1021) Do not create min sysfs attributes for LM84 hwmon: (ds1621) Remove detect function hwmon: (ds1621) Add ds1631 chip support to ds1621 driver and documentation hwmon: (ds1621) Add ds1721 update interval sysfs attribute hwmon: (ds1621) Add ds1721 chip support hwmon: (w83627ehf) Remove redundant platform_set_drvdata() hwmon: (ntc_thermistor) Remove redundant platform_set_drvdata() hwmon: (i5k_amb) Remove redundant platform_set_drvdata() hwmon: (coretemp) Remove redundant platform_set_drvdata() hwmon: (abituguru3) Remove redundant platform_set_drvdata()
This commit is contained in:
Linus Torvalds
commit
ddcf6600b1
47
Documentation/devicetree/bindings/hwmon/g762.txt
Normal file
47
Documentation/devicetree/bindings/hwmon/g762.txt
Normal file
@ -0,0 +1,47 @@
|
||||
GMT G762/G763 PWM Fan controller
|
||||
|
||||
Required node properties:
|
||||
|
||||
- "compatible": must be either "gmt,g762" or "gmt,g763"
|
||||
- "reg": I2C bus address of the device
|
||||
- "clocks": a fixed clock providing input clock frequency
|
||||
on CLK pin of the chip.
|
||||
|
||||
Optional properties:
|
||||
|
||||
- "fan_startv": fan startup voltage. Accepted values are 0, 1, 2 and 3.
|
||||
The higher the more.
|
||||
|
||||
- "pwm_polarity": pwm polarity. Accepted values are 0 (positive duty)
|
||||
and 1 (negative duty).
|
||||
|
||||
- "fan_gear_mode": fan gear mode. Supported values are 0, 1 and 2.
|
||||
|
||||
If an optional property is not set in .dts file, then current value is kept
|
||||
unmodified (e.g. u-boot installed value).
|
||||
|
||||
Additional information on operational parameters for the device is available
|
||||
in Documentation/hwmon/g762. A detailed datasheet for the device is available
|
||||
at http://natisbad.org/NAS/refs/GMT_EDS-762_763-080710-0.2.pdf.
|
||||
|
||||
Example g762 node:
|
||||
|
||||
clocks {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
g762_clk: fixedclk {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <8192>;
|
||||
}
|
||||
}
|
||||
|
||||
g762: g762@3e {
|
||||
compatible = "gmt,g762";
|
||||
reg = <0x3e>;
|
||||
clocks = <&g762_clk>
|
||||
fan_gear_mode = <0>; /* chip default */
|
||||
fan_startv = <1>; /* chip default */
|
||||
pwm_polarity = <0>; /* chip default */
|
||||
};
|
||||
22
Documentation/devicetree/bindings/i2c/ina2xx.txt
Normal file
22
Documentation/devicetree/bindings/i2c/ina2xx.txt
Normal file
@ -0,0 +1,22 @@
|
||||
ina2xx properties
|
||||
|
||||
Required properties:
|
||||
- compatible: Must be one of the following:
|
||||
- "ti,ina219" for ina219
|
||||
- "ti,ina220" for ina220
|
||||
- "ti,ina226" for ina226
|
||||
- "ti,ina230" for ina230
|
||||
- reg: I2C address
|
||||
|
||||
Optional properties:
|
||||
|
||||
- shunt-resistor
|
||||
Shunt resistor value in micro-Ohm
|
||||
|
||||
Example:
|
||||
|
||||
ina220@44 {
|
||||
compatible = "ti,ina220";
|
||||
reg = <0x44>;
|
||||
shunt-resistor = <1000>;
|
||||
};
|
||||
@ -2,16 +2,30 @@ Kernel driver ds1621
|
||||
====================
|
||||
|
||||
Supported chips:
|
||||
* Dallas Semiconductor DS1621
|
||||
* Dallas Semiconductor / Maxim Integrated DS1621
|
||||
Prefix: 'ds1621'
|
||||
Addresses scanned: I2C 0x48 - 0x4f
|
||||
Datasheet: Publicly available at the Dallas Semiconductor website
|
||||
http://www.dalsemi.com/
|
||||
Addresses scanned: none
|
||||
Datasheet: Publicly available from www.maximintegrated.com
|
||||
|
||||
* Dallas Semiconductor DS1625
|
||||
Prefix: 'ds1621'
|
||||
Addresses scanned: I2C 0x48 - 0x4f
|
||||
Datasheet: Publicly available at the Dallas Semiconductor website
|
||||
http://www.dalsemi.com/
|
||||
Prefix: 'ds1625'
|
||||
Addresses scanned: none
|
||||
Datasheet: Publicly available from www.datasheetarchive.com
|
||||
|
||||
* Maxim Integrated DS1631
|
||||
Prefix: 'ds1631'
|
||||
Addresses scanned: none
|
||||
Datasheet: Publicly available from www.maximintegrated.com
|
||||
|
||||
* Maxim Integrated DS1721
|
||||
Prefix: 'ds1721'
|
||||
Addresses scanned: none
|
||||
Datasheet: Publicly available from www.maximintegrated.com
|
||||
|
||||
* Maxim Integrated DS1731
|
||||
Prefix: 'ds1731'
|
||||
Addresses scanned: none
|
||||
Datasheet: Publicly available from www.maximintegrated.com
|
||||
|
||||
Authors:
|
||||
Christian W. Zuckschwerdt <zany@triq.net>
|
||||
@ -59,5 +73,115 @@ any of the limits have ever been met or exceeded since last power-up or
|
||||
reset. Be aware: When testing, it showed that the status of Tout can change
|
||||
with neither of the alarms set.
|
||||
|
||||
Temperature conversion of the DS1621 takes up to 1000ms; internal access to
|
||||
non-volatile registers may last for 10ms or below.
|
||||
Since there is no version or vendor identification register, there is
|
||||
no unique identification for these devices. Therefore, explicit device
|
||||
instantiation is required for correct device identification and functionality
|
||||
(one device per address in this address range: 0x48..0x4f).
|
||||
|
||||
The DS1625 is pin compatible and functionally equivalent with the DS1621,
|
||||
but the DS1621 is meant to replace it. The DS1631, DS1721, and DS1731 are
|
||||
also pin compatible with the DS1621 and provide multi-resolution support.
|
||||
|
||||
Additionally, the DS1721 data sheet says the temperature flags (THF and TLF)
|
||||
are used internally, however, these flags do get set and cleared as the actual
|
||||
temperature crosses the min or max settings (which by default are set to 75
|
||||
and 80 degrees respectively).
|
||||
|
||||
Temperature Conversion:
|
||||
-----------------------
|
||||
DS1621 - 750ms (older devices may take up to 1000ms)
|
||||
DS1625 - 500ms
|
||||
DS1631 - 93ms..750ms for 9..12 bits resolution, respectively.
|
||||
DS1721 - 93ms..750ms for 9..12 bits resolution, respectively.
|
||||
DS1731 - 93ms..750ms for 9..12 bits resolution, respectively.
|
||||
|
||||
Note:
|
||||
On the DS1621, internal access to non-volatile registers may last for 10ms
|
||||
or less (unverified on the other devices).
|
||||
|
||||
Temperature Accuracy:
|
||||
---------------------
|
||||
DS1621: +/- 0.5 degree Celsius (from 0 to +70 degrees)
|
||||
DS1625: +/- 0.5 degree Celsius (from 0 to +70 degrees)
|
||||
DS1631: +/- 0.5 degree Celsius (from 0 to +70 degrees)
|
||||
DS1721: +/- 1.0 degree Celsius (from -10 to +85 degrees)
|
||||
DS1731: +/- 1.0 degree Celsius (from -10 to +85 degrees)
|
||||
|
||||
Note:
|
||||
Please refer to the device datasheets for accuracy at other temperatures.
|
||||
|
||||
Temperature Resolution:
|
||||
-----------------------
|
||||
As mentioned above, the DS1631, DS1721, and DS1731 provide multi-resolution
|
||||
support, which is achieved via the R0 and R1 config register bits, where:
|
||||
|
||||
R0..R1
|
||||
------
|
||||
0 0 => 9 bits, 0.5 degrees Celcius
|
||||
1 0 => 10 bits, 0.25 degrees Celcius
|
||||
0 1 => 11 bits, 0.125 degrees Celcius
|
||||
1 1 => 12 bits, 0.0625 degrees Celcius
|
||||
|
||||
Note:
|
||||
At initial device power-on, the default resolution is set to 12-bits.
|
||||
|
||||
The resolution mode for the DS1631, DS1721, or DS1731 can be changed from
|
||||
userspace, via the device 'update_interval' sysfs attribute. This attribute
|
||||
will normalize the range of input values to the device maximum resolution
|
||||
values defined in the datasheet as follows:
|
||||
|
||||
Resolution Conversion Time Input Range
|
||||
(C/LSB) (msec) (msec)
|
||||
------------------------------------------------
|
||||
0.5 93.75 0....94
|
||||
0.25 187.5 95...187
|
||||
0.125 375 188..375
|
||||
0.0625 750 376..infinity
|
||||
------------------------------------------------
|
||||
|
||||
The following examples show how the 'update_interval' attribute can be
|
||||
used to change the conversion time:
|
||||
|
||||
$ cat update_interval
|
||||
750
|
||||
$ cat temp1_input
|
||||
22062
|
||||
$
|
||||
$ echo 300 > update_interval
|
||||
$ cat update_interval
|
||||
375
|
||||
$ cat temp1_input
|
||||
22125
|
||||
$
|
||||
$ echo 150 > update_interval
|
||||
$ cat update_interval
|
||||
188
|
||||
$ cat temp1_input
|
||||
22250
|
||||
$
|
||||
$ echo 1 > update_interval
|
||||
$ cat update_interval
|
||||
94
|
||||
$ cat temp1_input
|
||||
22000
|
||||
$
|
||||
$ echo 1000 > update_interval
|
||||
$ cat update_interval
|
||||
750
|
||||
$ cat temp1_input
|
||||
22062
|
||||
$
|
||||
|
||||
As shown, the ds1621 driver automatically adjusts the 'update_interval'
|
||||
user input, via a step function. Reading back the 'update_interval' value
|
||||
after a write operation provides the conversion time used by the device.
|
||||
|
||||
Mathematically, the resolution can be derived from the conversion time
|
||||
via the following function:
|
||||
|
||||
g(x) = 0.5 * [minimum_conversion_time/x]
|
||||
|
||||
where:
|
||||
-> 'x' = the output from 'update_interval'
|
||||
-> 'g(x)' = the resolution in degrees C per LSB.
|
||||
-> 93.75ms = minimum conversion time
|
||||
|
||||
65
Documentation/hwmon/g762
Normal file
65
Documentation/hwmon/g762
Normal file
@ -0,0 +1,65 @@
|
||||
Kernel driver g762
|
||||
==================
|
||||
|
||||
The GMT G762 Fan Speed PWM Controller is connected directly to a fan
|
||||
and performs closed-loop or open-loop control of the fan speed. Two
|
||||
modes - PWM or DC - are supported by the device.
|
||||
|
||||
For additional information, a detailed datasheet is available at
|
||||
http://natisbad.org/NAS/ref/GMT_EDS-762_763-080710-0.2.pdf. sysfs
|
||||
bindings are described in Documentation/hwmon/sysfs-interface.
|
||||
|
||||
The following entries are available to the user in a subdirectory of
|
||||
/sys/bus/i2c/drivers/g762/ to control the operation of the device.
|
||||
This can be done manually using the following entries but is usually
|
||||
done via a userland daemon like fancontrol.
|
||||
|
||||
Note that those entries do not provide ways to setup the specific
|
||||
hardware characteristics of the system (reference clock, pulses per
|
||||
fan revolution, ...); Those can be modified via devicetree bindings
|
||||
documented in Documentation/devicetree/bindings/hwmon/g762.txt or
|
||||
using a specific platform_data structure in board initialization
|
||||
file (see include/linux/platform_data/g762.h).
|
||||
|
||||
fan1_target: set desired fan speed. This only makes sense in closed-loop
|
||||
fan speed control (i.e. when pwm1_enable is set to 2).
|
||||
|
||||
fan1_input: provide current fan rotation value in RPM as reported by
|
||||
the fan to the device.
|
||||
|
||||
fan1_div: fan clock divisor. Supported value are 1, 2, 4 and 8.
|
||||
|
||||
fan1_pulses: number of pulses per fan revolution. Supported values
|
||||
are 2 and 4.
|
||||
|
||||
fan1_fault: reports fan failure, i.e. no transition on fan gear pin for
|
||||
about 0.7s (if the fan is not voluntarily set off).
|
||||
|
||||
fan1_alarm: in closed-loop control mode, if fan RPM value is 25% out
|
||||
of the programmed value for over 6 seconds 'fan1_alarm' is
|
||||
set to 1.
|
||||
|
||||
pwm1_enable: set current fan speed control mode i.e. 1 for manual fan
|
||||
speed control (open-loop) via pwm1 described below, 2 for
|
||||
automatic fan speed control (closed-loop) via fan1_target
|
||||
above.
|
||||
|
||||
pwm1_mode: set or get fan driving mode: 1 for PWM mode, 0 for DC mode.
|
||||
|
||||
pwm1: get or set PWM fan control value in open-loop mode. This is an
|
||||
integer value between 0 and 255. 0 stops the fan, 255 makes
|
||||
it run at full speed.
|
||||
|
||||
Both in PWM mode ('pwm1_mode' set to 1) and DC mode ('pwm1_mode' set to 0),
|
||||
when current fan speed control mode is open-loop ('pwm1_enable' set to 1),
|
||||
the fan speed is programmed by setting a value between 0 and 255 via 'pwm1'
|
||||
entry (0 stops the fan, 255 makes it run at full speed). In closed-loop mode
|
||||
('pwm1_enable' set to 2), the expected rotation speed in RPM can be passed to
|
||||
the chip via 'fan1_target'. In closed-loop mode, the target speed is compared
|
||||
with current speed (available via 'fan1_input') by the device and a feedback
|
||||
is performed to match that target value. The fan speed value is computed
|
||||
based on the parameters associated with the physical characteristics of the
|
||||
system: a reference clock source frequency, a number of pulses per fan
|
||||
revolution, etc.
|
||||
|
||||
Note that the driver will update its values at most once per second.
|
||||
@ -44,4 +44,6 @@ The INA226 monitors both a shunt voltage drop and bus supply voltage.
|
||||
The INA230 is a high or low side current shunt and power monitor with an I2C
|
||||
interface. The INA230 monitors both a shunt voltage drop and bus supply voltage.
|
||||
|
||||
The shunt value in micro-ohms can be set via platform data.
|
||||
The shunt value in micro-ohms can be set via platform data or device tree.
|
||||
Please refer to the Documentation/devicetree/bindings/i2c/ina2xx.txt for bindings
|
||||
if the device tree is used.
|
||||
|
||||
@ -348,11 +348,16 @@ config SENSORS_DS620
|
||||
will be called ds620.
|
||||
|
||||
config SENSORS_DS1621
|
||||
tristate "Dallas Semiconductor DS1621 and DS1625"
|
||||
tristate "Dallas Semiconductor DS1621 and compatibles"
|
||||
depends on I2C
|
||||
help
|
||||
If you say yes here you get support for Dallas Semiconductor
|
||||
DS1621 and DS1625 sensor chips.
|
||||
If you say yes here you get support for Dallas Semiconductor/Maxim
|
||||
Integrated DS1621 sensor chips and compatible models including:
|
||||
|
||||
- Dallas Semiconductor DS1625
|
||||
- Maxim Integrated DS1631
|
||||
- Maxim Integrated DS1721
|
||||
- Maxim Integrated DS1731
|
||||
|
||||
This driver can also be built as a module. If so, the module
|
||||
will be called ds1621.
|
||||
@ -456,6 +461,16 @@ config SENSORS_G760A
|
||||
This driver can also be built as a module. If so, the module
|
||||
will be called g760a.
|
||||
|
||||
config SENSORS_G762
|
||||
tristate "GMT G762 and G763"
|
||||
depends on I2C
|
||||
help
|
||||
If you say yes here you get support for Global Mixed-mode
|
||||
Technology Inc G762 and G763 fan speed PWM controller chips.
|
||||
|
||||
This driver can also be built as a module. If so, the module
|
||||
will be called g762.
|
||||
|
||||
config SENSORS_GL518SM
|
||||
tristate "Genesys Logic GL518SM"
|
||||
depends on I2C
|
||||
|
||||
@ -60,6 +60,7 @@ obj-$(CONFIG_SENSORS_F75375S) += f75375s.o
|
||||
obj-$(CONFIG_SENSORS_FAM15H_POWER) += fam15h_power.o
|
||||
obj-$(CONFIG_SENSORS_FSCHMD) += fschmd.o
|
||||
obj-$(CONFIG_SENSORS_G760A) += g760a.o
|
||||
obj-$(CONFIG_SENSORS_G762) += g762.o
|
||||
obj-$(CONFIG_SENSORS_GL518SM) += gl518sm.o
|
||||
obj-$(CONFIG_SENSORS_GL520SM) += gl520sm.o
|
||||
obj-$(CONFIG_SENSORS_GPIO_FAN) += gpio-fan.o
|
||||
|
||||
@ -1079,7 +1079,6 @@ static int abituguru3_remove(struct platform_device *pdev)
|
||||
int i;
|
||||
struct abituguru3_data *data = platform_get_drvdata(pdev);
|
||||
|
||||
platform_set_drvdata(pdev, NULL);
|
||||
hwmon_device_unregister(data->hwmon_dev);
|
||||
for (i = 0; data->sysfs_attr[i].dev_attr.attr.name; i++)
|
||||
device_remove_file(&pdev->dev, &data->sysfs_attr[i].dev_attr);
|
||||
|
||||
@ -284,15 +284,11 @@ static DEVICE_ATTR(low_power, S_IWUSR | S_IRUGO, show_low_power, set_low_power);
|
||||
|
||||
static struct attribute *adm1021_attributes[] = {
|
||||
&sensor_dev_attr_temp1_max.dev_attr.attr,
|
||||
&sensor_dev_attr_temp1_min.dev_attr.attr,
|
||||
&sensor_dev_attr_temp1_input.dev_attr.attr,
|
||||
&sensor_dev_attr_temp2_max.dev_attr.attr,
|
||||
&sensor_dev_attr_temp2_min.dev_attr.attr,
|
||||
&sensor_dev_attr_temp2_input.dev_attr.attr,
|
||||
&sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
|
||||
&sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
|
||||
&sensor_dev_attr_temp2_max_alarm.dev_attr.attr,
|
||||
&sensor_dev_attr_temp2_min_alarm.dev_attr.attr,
|
||||
&sensor_dev_attr_temp2_fault.dev_attr.attr,
|
||||
&dev_attr_alarms.attr,
|
||||
&dev_attr_low_power.attr,
|
||||
@ -303,6 +299,18 @@ static const struct attribute_group adm1021_group = {
|
||||
.attrs = adm1021_attributes,
|
||||
};
|
||||
|
||||
static struct attribute *adm1021_min_attributes[] = {
|
||||
&sensor_dev_attr_temp1_min.dev_attr.attr,
|
||||
&sensor_dev_attr_temp2_min.dev_attr.attr,
|
||||
&sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
|
||||
&sensor_dev_attr_temp2_min_alarm.dev_attr.attr,
|
||||
NULL
|
||||
};
|
||||
|
||||
static const struct attribute_group adm1021_min_group = {
|
||||
.attrs = adm1021_min_attributes,
|
||||
};
|
||||
|
||||
/* Return 0 if detection is successful, -ENODEV otherwise */
|
||||
static int adm1021_detect(struct i2c_client *client,
|
||||
struct i2c_board_info *info)
|
||||
@ -425,6 +433,12 @@ static int adm1021_probe(struct i2c_client *client,
|
||||
if (err)
|
||||
return err;
|
||||
|
||||
if (data->type != lm84) {
|
||||
err = sysfs_create_group(&client->dev.kobj, &adm1021_min_group);
|
||||
if (err)
|
||||
goto error;
|
||||
}
|
||||
|
||||
data->hwmon_dev = hwmon_device_register(&client->dev);
|
||||
if (IS_ERR(data->hwmon_dev)) {
|
||||
err = PTR_ERR(data->hwmon_dev);
|
||||
@ -434,6 +448,7 @@ static int adm1021_probe(struct i2c_client *client,
|
||||
return 0;
|
||||
|
||||
error:
|
||||
sysfs_remove_group(&client->dev.kobj, &adm1021_min_group);
|
||||
sysfs_remove_group(&client->dev.kobj, &adm1021_group);
|
||||
return err;
|
||||
}
|
||||
@ -452,6 +467,7 @@ static int adm1021_remove(struct i2c_client *client)
|
||||
struct adm1021_data *data = i2c_get_clientdata(client);
|
||||
|
||||
hwmon_device_unregister(data->hwmon_dev);
|
||||
sysfs_remove_group(&client->dev.kobj, &adm1021_min_group);
|
||||
sysfs_remove_group(&client->dev.kobj, &adm1021_group);
|
||||
|
||||
return 0;
|
||||
@ -477,9 +493,11 @@ static struct adm1021_data *adm1021_update_device(struct device *dev)
|
||||
data->temp_max[i] = 1000 *
|
||||
(s8) i2c_smbus_read_byte_data(
|
||||
client, ADM1021_REG_TOS_R(i));
|
||||
if (data->type != lm84) {
|
||||
data->temp_min[i] = 1000 *
|
||||
(s8) i2c_smbus_read_byte_data(
|
||||
client, ADM1021_REG_THYST_R(i));
|
||||
(s8) i2c_smbus_read_byte_data(client,
|
||||
ADM1021_REG_THYST_R(i));
|
||||
}
|
||||
}
|
||||
data->alarms = i2c_smbus_read_byte_data(client,
|
||||
ADM1021_REG_STATUS) & 0x7c;
|
||||
|
||||
@ -578,7 +578,6 @@ static int coretemp_probe(struct platform_device *pdev)
|
||||
|
||||
exit_name:
|
||||
device_remove_file(&pdev->dev, &pdata->name_attr);
|
||||
platform_set_drvdata(pdev, NULL);
|
||||
exit_free:
|
||||
kfree(pdata);
|
||||
return err;
|
||||
@ -595,7 +594,6 @@ static int coretemp_remove(struct platform_device *pdev)
|
||||
|
||||
device_remove_file(&pdev->dev, &pdata->name_attr);
|
||||
hwmon_device_unregister(pdata->hwmon_dev);
|
||||
platform_set_drvdata(pdev, NULL);
|
||||
kfree(pdata);
|
||||
return 0;
|
||||
}
|
||||
|
||||
@ -6,6 +6,19 @@
|
||||
* Ported to Linux 2.6 by Aurelien Jarno <aurelien@aurel32.net> with
|
||||
* the help of Jean Delvare <khali@linux-fr.org>
|
||||
*
|
||||
* The DS1621 device is a digital temperature/thermometer with 9-bit
|
||||
* resolution, a thermal alarm output (Tout), and user-defined minimum
|
||||
* and maximum temperature thresholds (TH and TL).
|
||||
*
|
||||
* The DS1625, DS1631, DS1721, and DS1731 are pin compatible with the DS1621
|
||||
* and similar in operation, with slight variations as noted in the device
|
||||
* datasheets (please refer to www.maximintegrated.com for specific
|
||||
* device information).
|
||||
*
|
||||
* Since the DS1621 was the first chipset supported by this driver,
|
||||
* most comments will refer to this chipset, but are actually general
|
||||
* and concern all supported chipsets, unless mentioned otherwise.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
@ -31,27 +44,62 @@
|
||||
#include <linux/err.h>
|
||||
#include <linux/mutex.h>
|
||||
#include <linux/sysfs.h>
|
||||
#include "lm75.h"
|
||||
#include <linux/kernel.h>
|
||||
|
||||
/* Addresses to scan */
|
||||
static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c,
|
||||
0x4d, 0x4e, 0x4f, I2C_CLIENT_END };
|
||||
/* Supported devices */
|
||||
enum chips { ds1621, ds1625, ds1631, ds1721, ds1731 };
|
||||
|
||||
/* Insmod parameters */
|
||||
static int polarity = -1;
|
||||
module_param(polarity, int, 0);
|
||||
MODULE_PARM_DESC(polarity, "Output's polarity: 0 = active high, 1 = active low");
|
||||
|
||||
/* Many DS1621 constants specified below */
|
||||
/* Config register used for detection */
|
||||
/* 7 6 5 4 3 2 1 0 */
|
||||
/* |Done|THF |TLF |NVB | X | X |POL |1SHOT| */
|
||||
/*
|
||||
* The Configuration/Status register
|
||||
*
|
||||
* - DS1621:
|
||||
* 7 6 5 4 3 2 1 0
|
||||
* |Done|THF |TLF |NVB | X | X |POL |1SHOT|
|
||||
*
|
||||
* - DS1625:
|
||||
* 7 6 5 4 3 2 1 0
|
||||
* |Done|THF |TLF |NVB | 1 | 0 |POL |1SHOT|
|
||||
*
|
||||
* - DS1631, DS1731:
|
||||
* 7 6 5 4 3 2 1 0
|
||||
* |Done|THF |TLF |NVB | R1 | R0 |POL |1SHOT|
|
||||
*
|
||||
* - DS1721:
|
||||
* 7 6 5 4 3 2 1 0
|
||||
* |Done| X | X | U | R1 | R0 |POL |1SHOT|
|
||||
*
|
||||
* Where:
|
||||
* - 'X' is Reserved
|
||||
* - 'U' is Undefined
|
||||
*/
|
||||
#define DS1621_REG_CONFIG_NVB 0x10
|
||||
#define DS1621_REG_CONFIG_RESOL 0x0C
|
||||
#define DS1621_REG_CONFIG_POLARITY 0x02
|
||||
#define DS1621_REG_CONFIG_1SHOT 0x01
|
||||
#define DS1621_REG_CONFIG_DONE 0x80
|
||||
|
||||
/* The DS1621 registers */
|
||||
#define DS1621_REG_CONFIG_RESOL_SHIFT 2
|
||||
|
||||
/* ds1721 conversion rates: {C/LSB, time(ms), resolution bit setting} */
|
||||
static const unsigned short ds1721_convrates[] = {
|
||||
94, /* 9-bits (0.5, 93.75, RES[0..1] = 0 */
|
||||
188, /* 10-bits (0.25, 187.5, RES[0..1] = 1 */
|
||||
375, /* 11-bits (0.125, 375, RES[0..1] = 2 */
|
||||
750, /* 12-bits (0.0625, 750, RES[0..1] = 3 */
|
||||
};
|
||||
|
||||
#define DS1621_CONVERSION_MAX 750
|
||||
#define DS1625_CONVERSION_MAX 500
|
||||
|
||||
#define DS1621_TEMP_MAX 125000
|
||||
#define DS1621_TEMP_MIN (-55000)
|
||||
|
||||
/* The DS1621 temperature registers */
|
||||
static const u8 DS1621_REG_TEMP[3] = {
|
||||
0xAA, /* input, word, RO */
|
||||
0xA2, /* min, word, RW */
|
||||
@ -59,6 +107,7 @@ static const u8 DS1621_REG_TEMP[3] = {
|
||||
};
|
||||
#define DS1621_REG_CONF 0xAC /* byte, RW */
|
||||
#define DS1621_COM_START 0xEE /* no data */
|
||||
#define DS1721_COM_START 0x51 /* no data */
|
||||
#define DS1621_COM_STOP 0x22 /* no data */
|
||||
|
||||
/* The DS1621 configuration register */
|
||||
@ -75,14 +124,37 @@ struct ds1621_data {
|
||||
struct mutex update_lock;
|
||||
char valid; /* !=0 if following fields are valid */
|
||||
unsigned long last_updated; /* In jiffies */
|
||||
enum chips kind; /* device type */
|
||||
|
||||
u16 temp[3]; /* Register values, word */
|
||||
u8 conf; /* Register encoding, combined */
|
||||
u8 zbits; /* Resolution encoded as number of
|
||||
* zero bits */
|
||||
u16 update_interval; /* Conversion rate in milliseconds */
|
||||
};
|
||||
|
||||
static inline int DS1621_TEMP_FROM_REG(u16 reg)
|
||||
{
|
||||
return DIV_ROUND_CLOSEST(((s16)reg / 16) * 625, 10);
|
||||
}
|
||||
|
||||
/*
|
||||
* TEMP: 0.001C/bit (-55C to +125C)
|
||||
* REG:
|
||||
* - 1621, 1625: 0.5C/bit, 7 zero-bits
|
||||
* - 1631, 1721, 1731: 0.0625C/bit, 4 zero-bits
|
||||
*/
|
||||
static inline u16 DS1621_TEMP_TO_REG(long temp, u8 zbits)
|
||||
{
|
||||
temp = clamp_val(temp, DS1621_TEMP_MIN, DS1621_TEMP_MAX);
|
||||
temp = DIV_ROUND_CLOSEST(temp * (1 << (8 - zbits)), 1000) << zbits;
|
||||
return temp;
|
||||
}
|
||||
|
||||
static void ds1621_init_client(struct i2c_client *client)
|
||||
{
|
||||
u8 conf, new_conf;
|
||||
u8 conf, new_conf, sreg, resol;
|
||||
struct ds1621_data *data = i2c_get_clientdata(client);
|
||||
|
||||
new_conf = conf = i2c_smbus_read_byte_data(client, DS1621_REG_CONF);
|
||||
/* switch to continuous conversion mode */
|
||||
@ -97,8 +169,30 @@ static void ds1621_init_client(struct i2c_client *client)
|
||||
if (conf != new_conf)
|
||||
i2c_smbus_write_byte_data(client, DS1621_REG_CONF, new_conf);
|
||||
|
||||
switch (data->kind) {
|
||||
case ds1625:
|
||||
data->update_interval = DS1625_CONVERSION_MAX;
|
||||
data->zbits = 7;
|
||||
sreg = DS1621_COM_START;
|
||||
break;
|
||||
case ds1631:
|
||||
case ds1721:
|
||||
case ds1731:
|
||||
resol = (new_conf & DS1621_REG_CONFIG_RESOL) >>
|
||||
DS1621_REG_CONFIG_RESOL_SHIFT;
|
||||
data->update_interval = ds1721_convrates[resol];
|
||||
data->zbits = 7 - resol;
|
||||
sreg = DS1721_COM_START;
|
||||
break;
|
||||
default:
|
||||
data->update_interval = DS1621_CONVERSION_MAX;
|
||||
data->zbits = 7;
|
||||
sreg = DS1621_COM_START;
|
||||
break;
|
||||
}
|
||||
|
||||
/* start conversion */
|
||||
i2c_smbus_write_byte(client, DS1621_COM_START);
|
||||
i2c_smbus_write_byte(client, sreg);
|
||||
}
|
||||
|
||||
static struct ds1621_data *ds1621_update_client(struct device *dev)
|
||||
@ -109,8 +203,8 @@ static struct ds1621_data *ds1621_update_client(struct device *dev)
|
||||
|
||||
mutex_lock(&data->update_lock);
|
||||
|
||||
if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
|
||||
|| !data->valid) {
|
||||
if (time_after(jiffies, data->last_updated + data->update_interval) ||
|
||||
!data->valid) {
|
||||
int i;
|
||||
|
||||
dev_dbg(&client->dev, "Starting ds1621 update\n");
|
||||
@ -146,7 +240,7 @@ static ssize_t show_temp(struct device *dev, struct device_attribute *da,
|
||||
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
|
||||
struct ds1621_data *data = ds1621_update_client(dev);
|
||||
return sprintf(buf, "%d\n",
|
||||
LM75_TEMP_FROM_REG(data->temp[attr->index]));
|
||||
DS1621_TEMP_FROM_REG(data->temp[attr->index]));
|
||||
}
|
||||
|
||||
static ssize_t set_temp(struct device *dev, struct device_attribute *da,
|
||||
@ -163,7 +257,7 @@ static ssize_t set_temp(struct device *dev, struct device_attribute *da,
|
||||
return err;
|
||||
|
||||
mutex_lock(&data->update_lock);
|
||||
data->temp[attr->index] = LM75_TEMP_TO_REG(val);
|
||||
data->temp[attr->index] = DS1621_TEMP_TO_REG(val, data->zbits);
|
||||
i2c_smbus_write_word_swapped(client, DS1621_REG_TEMP[attr->index],
|
||||
data->temp[attr->index]);
|
||||
mutex_unlock(&data->update_lock);
|
||||
@ -185,7 +279,47 @@ static ssize_t show_alarm(struct device *dev, struct device_attribute *da,
|
||||
return sprintf(buf, "%d\n", !!(data->conf & attr->index));
|
||||
}
|
||||
|
||||
static ssize_t show_convrate(struct device *dev, struct device_attribute *da,
|
||||
char *buf)
|
||||
{
|
||||
struct i2c_client *client = to_i2c_client(dev);
|
||||
struct ds1621_data *data = i2c_get_clientdata(client);
|
||||
return scnprintf(buf, PAGE_SIZE, "%hu\n", data->update_interval);
|
||||
}
|
||||
|
||||
static ssize_t set_convrate(struct device *dev, struct device_attribute *da,
|
||||
const char *buf, size_t count)
|
||||
{
|
||||
struct i2c_client *client = to_i2c_client(dev);
|
||||
struct ds1621_data *data = i2c_get_clientdata(client);
|
||||
unsigned long convrate;
|
||||
s32 err;
|
||||
int resol = 0;
|
||||
|
||||
err = kstrtoul(buf, 10, &convrate);
|
||||
if (err)
|
||||
return err;
|
||||
|
||||
/* Convert rate into resolution bits */
|
||||
while (resol < (ARRAY_SIZE(ds1721_convrates) - 1) &&
|
||||
convrate > ds1721_convrates[resol])
|
||||
resol++;
|
||||
|
||||
mutex_lock(&data->update_lock);
|
||||
data->conf = i2c_smbus_read_byte_data(client, DS1621_REG_CONF);
|
||||
data->conf &= ~DS1621_REG_CONFIG_RESOL;
|
||||
data->conf |= (resol << DS1621_REG_CONFIG_RESOL_SHIFT);
|
||||
i2c_smbus_write_byte_data(client, DS1621_REG_CONF, data->conf);
|
||||
data->update_interval = ds1721_convrates[resol];
|
||||
mutex_unlock(&data->update_lock);
|
||||
|
||||
return count;
|
||||
}
|
||||
|
||||
static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
|
||||
static DEVICE_ATTR(update_interval, S_IWUSR | S_IRUGO, show_convrate,
|
||||
set_convrate);
|
||||
|
||||
static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
|
||||
static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp, set_temp, 1);
|
||||
static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp, set_temp, 2);
|
||||
@ -201,48 +335,29 @@ static struct attribute *ds1621_attributes[] = {
|
||||
&sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
|
||||
&sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
|
||||
&dev_attr_alarms.attr,
|
||||
&dev_attr_update_interval.attr,
|
||||
NULL
|
||||
};
|
||||
|
||||
static umode_t ds1621_attribute_visible(struct kobject *kobj,
|
||||
struct attribute *attr, int index)
|
||||
{
|
||||
struct device *dev = container_of(kobj, struct device, kobj);
|
||||
struct i2c_client *client = to_i2c_client(dev);
|
||||
struct ds1621_data *data = i2c_get_clientdata(client);
|
||||
|
||||
if (attr == &dev_attr_update_interval.attr)
|
||||
if (data->kind == ds1621 || data->kind == ds1625)
|
||||
/* shhh, we're hiding update_interval */
|
||||
return 0;
|
||||
return attr->mode;
|
||||
}
|
||||
|
||||
static const struct attribute_group ds1621_group = {
|
||||
.attrs = ds1621_attributes,
|
||||
.is_visible = ds1621_attribute_visible
|
||||
};
|
||||
|
||||
|
||||
/* Return 0 if detection is successful, -ENODEV otherwise */
|
||||
static int ds1621_detect(struct i2c_client *client,
|
||||
struct i2c_board_info *info)
|
||||
{
|
||||
struct i2c_adapter *adapter = client->adapter;
|
||||
int conf, temp;
|
||||
int i;
|
||||
|
||||
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA
|
||||
| I2C_FUNC_SMBUS_WORD_DATA
|
||||
| I2C_FUNC_SMBUS_WRITE_BYTE))
|
||||
return -ENODEV;
|
||||
|
||||
/*
|
||||
* Now, we do the remaining detection. It is lousy.
|
||||
*
|
||||
* The NVB bit should be low if no EEPROM write has been requested
|
||||
* during the latest 10ms, which is highly improbable in our case.
|
||||
*/
|
||||
conf = i2c_smbus_read_byte_data(client, DS1621_REG_CONF);
|
||||
if (conf < 0 || conf & DS1621_REG_CONFIG_NVB)
|
||||
return -ENODEV;
|
||||
/* The 7 lowest bits of a temperature should always be 0. */
|
||||
for (i = 0; i < ARRAY_SIZE(DS1621_REG_TEMP); i++) {
|
||||
temp = i2c_smbus_read_word_data(client, DS1621_REG_TEMP[i]);
|
||||
if (temp < 0 || (temp & 0x7f00))
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
strlcpy(info->type, "ds1621", I2C_NAME_SIZE);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int ds1621_probe(struct i2c_client *client,
|
||||
const struct i2c_device_id *id)
|
||||
{
|
||||
@ -257,6 +372,8 @@ static int ds1621_probe(struct i2c_client *client,
|
||||
i2c_set_clientdata(client, data);
|
||||
mutex_init(&data->update_lock);
|
||||
|
||||
data->kind = id->driver_data;
|
||||
|
||||
/* Initialize the DS1621 chip */
|
||||
ds1621_init_client(client);
|
||||
|
||||
@ -289,8 +406,11 @@ static int ds1621_remove(struct i2c_client *client)
|
||||
}
|
||||
|
||||
static const struct i2c_device_id ds1621_id[] = {
|
||||
{ "ds1621", 0 },
|
||||
{ "ds1625", 0 },
|
||||
{ "ds1621", ds1621 },
|
||||
{ "ds1625", ds1625 },
|
||||
{ "ds1631", ds1631 },
|
||||
{ "ds1721", ds1721 },
|
||||
{ "ds1731", ds1731 },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(i2c, ds1621_id);
|
||||
@ -304,8 +424,6 @@ static struct i2c_driver ds1621_driver = {
|
||||
.probe = ds1621_probe,
|
||||
.remove = ds1621_remove,
|
||||
.id_table = ds1621_id,
|
||||
.detect = ds1621_detect,
|
||||
.address_list = normal_i2c,
|
||||
};
|
||||
|
||||
module_i2c_driver(ds1621_driver);
|
||||
|
||||
1149
drivers/hwmon/g762.c
Normal file
1149
drivers/hwmon/g762.c
Normal file
File diff suppressed because it is too large
Load Diff
@ -556,7 +556,6 @@ static int i5k_amb_probe(struct platform_device *pdev)
|
||||
|
||||
err_init_failed:
|
||||
iounmap(data->amb_mmio);
|
||||
platform_set_drvdata(pdev, NULL);
|
||||
err_map_failed:
|
||||
release_mem_region(data->amb_base, data->amb_len);
|
||||
err:
|
||||
@ -576,7 +575,6 @@ static int i5k_amb_remove(struct platform_device *pdev)
|
||||
kfree(data->attrs);
|
||||
iounmap(data->amb_mmio);
|
||||
release_mem_region(data->amb_base, data->amb_len);
|
||||
platform_set_drvdata(pdev, NULL);
|
||||
kfree(data);
|
||||
return 0;
|
||||
}
|
||||
|
||||
@ -180,6 +180,7 @@ static struct of_device_id iio_hwmon_of_match[] = {
|
||||
{ .compatible = "iio-hwmon", },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, iio_hwmon_of_match);
|
||||
|
||||
static struct platform_driver __refdata iio_hwmon_driver = {
|
||||
.driver = {
|
||||
|
||||
@ -34,6 +34,7 @@
|
||||
#include <linux/hwmon.h>
|
||||
#include <linux/hwmon-sysfs.h>
|
||||
#include <linux/jiffies.h>
|
||||
#include <linux/of.h>
|
||||
|
||||
#include <linux/platform_data/ina2xx.h>
|
||||
|
||||
@ -221,6 +222,7 @@ static int ina2xx_probe(struct i2c_client *client,
|
||||
struct ina2xx_data *data;
|
||||
struct ina2xx_platform_data *pdata;
|
||||
int ret;
|
||||
u32 val;
|
||||
long shunt = 10000; /* default shunt value 10mOhms */
|
||||
|
||||
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA))
|
||||
@ -234,6 +236,9 @@ static int ina2xx_probe(struct i2c_client *client,
|
||||
pdata =
|
||||
(struct ina2xx_platform_data *)client->dev.platform_data;
|
||||
shunt = pdata->shunt_uohms;
|
||||
} else if (!of_property_read_u32(client->dev.of_node,
|
||||
"shunt-resistor", &val)) {
|
||||
shunt = val;
|
||||
}
|
||||
|
||||
if (shunt <= 0)
|
||||
|
||||
@ -199,7 +199,7 @@ static const s8 NCT6775_ALARM_BITS[] = {
|
||||
0, 1, 2, 3, 8, 21, 20, 16, /* in0.. in7 */
|
||||
17, -1, -1, -1, -1, -1, -1, /* in8..in14 */
|
||||
-1, /* unused */
|
||||
6, 7, 11, 10, 23, /* fan1..fan5 */
|
||||
6, 7, 11, -1, -1, /* fan1..fan5 */
|
||||
-1, -1, -1, /* unused */
|
||||
4, 5, 13, -1, -1, -1, /* temp1..temp6 */
|
||||
12, -1 }; /* intrusion0, intrusion1 */
|
||||
@ -625,6 +625,7 @@ struct nct6775_data {
|
||||
u8 has_fan_min; /* some fans don't have min register */
|
||||
bool has_fan_div;
|
||||
|
||||
u8 num_temp_alarms; /* 2 or 3 */
|
||||
u8 temp_fixed_num; /* 3 or 6 */
|
||||
u8 temp_type[NUM_TEMP_FIXED];
|
||||
s8 temp_offset[NUM_TEMP_FIXED];
|
||||
@ -1193,6 +1194,42 @@ show_alarm(struct device *dev, struct device_attribute *attr, char *buf)
|
||||
(unsigned int)((data->alarms >> nr) & 0x01));
|
||||
}
|
||||
|
||||
static int find_temp_source(struct nct6775_data *data, int index, int count)
|
||||
{
|
||||
int source = data->temp_src[index];
|
||||
int nr;
|
||||
|
||||
for (nr = 0; nr < count; nr++) {
|
||||
int src;
|
||||
|
||||
src = nct6775_read_value(data,
|
||||
data->REG_TEMP_SOURCE[nr]) & 0x1f;
|
||||
if (src == source)
|
||||
return nr;
|
||||
}
|
||||
return -1;
|
||||
}
|
||||
|
||||
static ssize_t
|
||||
show_temp_alarm(struct device *dev, struct device_attribute *attr, char *buf)
|
||||
{
|
||||
struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr);
|
||||
struct nct6775_data *data = nct6775_update_device(dev);
|
||||
unsigned int alarm = 0;
|
||||
int nr;
|
||||
|
||||
/*
|
||||
* For temperatures, there is no fixed mapping from registers to alarm
|
||||
* bits. Alarm bits are determined by the temperature source mapping.
|
||||
*/
|
||||
nr = find_temp_source(data, sattr->index, data->num_temp_alarms);
|
||||
if (nr >= 0) {
|
||||
int bit = data->ALARM_BITS[nr + TEMP_ALARM_BASE];
|
||||
alarm = (data->alarms >> bit) & 0x01;
|
||||
}
|
||||
return sprintf(buf, "%u\n", alarm);
|
||||
}
|
||||
|
||||
static SENSOR_DEVICE_ATTR_2(in0_input, S_IRUGO, show_in_reg, NULL, 0, 0);
|
||||
static SENSOR_DEVICE_ATTR_2(in1_input, S_IRUGO, show_in_reg, NULL, 1, 0);
|
||||
static SENSOR_DEVICE_ATTR_2(in2_input, S_IRUGO, show_in_reg, NULL, 2, 0);
|
||||
@ -1874,22 +1911,18 @@ static struct sensor_device_attribute sda_temp_type[] = {
|
||||
};
|
||||
|
||||
static struct sensor_device_attribute sda_temp_alarm[] = {
|
||||
SENSOR_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL,
|
||||
TEMP_ALARM_BASE),
|
||||
SENSOR_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL,
|
||||
TEMP_ALARM_BASE + 1),
|
||||
SENSOR_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL,
|
||||
TEMP_ALARM_BASE + 2),
|
||||
SENSOR_ATTR(temp4_alarm, S_IRUGO, show_alarm, NULL,
|
||||
TEMP_ALARM_BASE + 3),
|
||||
SENSOR_ATTR(temp5_alarm, S_IRUGO, show_alarm, NULL,
|
||||
TEMP_ALARM_BASE + 4),
|
||||
SENSOR_ATTR(temp6_alarm, S_IRUGO, show_alarm, NULL,
|
||||
TEMP_ALARM_BASE + 5),
|
||||
SENSOR_ATTR(temp1_alarm, S_IRUGO, show_temp_alarm, NULL, 0),
|
||||
SENSOR_ATTR(temp2_alarm, S_IRUGO, show_temp_alarm, NULL, 1),
|
||||
SENSOR_ATTR(temp3_alarm, S_IRUGO, show_temp_alarm, NULL, 2),
|
||||
SENSOR_ATTR(temp4_alarm, S_IRUGO, show_temp_alarm, NULL, 3),
|
||||
SENSOR_ATTR(temp5_alarm, S_IRUGO, show_temp_alarm, NULL, 4),
|
||||
SENSOR_ATTR(temp6_alarm, S_IRUGO, show_temp_alarm, NULL, 5),
|
||||
SENSOR_ATTR(temp7_alarm, S_IRUGO, show_temp_alarm, NULL, 6),
|
||||
SENSOR_ATTR(temp8_alarm, S_IRUGO, show_temp_alarm, NULL, 7),
|
||||
SENSOR_ATTR(temp9_alarm, S_IRUGO, show_temp_alarm, NULL, 8),
|
||||
SENSOR_ATTR(temp10_alarm, S_IRUGO, show_temp_alarm, NULL, 9),
|
||||
};
|
||||
|
||||
#define NUM_TEMP_ALARM ARRAY_SIZE(sda_temp_alarm)
|
||||
|
||||
static ssize_t
|
||||
show_pwm_mode(struct device *dev, struct device_attribute *attr, char *buf)
|
||||
{
|
||||
@ -3215,13 +3248,11 @@ static void nct6775_device_remove_files(struct device *dev)
|
||||
device_remove_file(dev, &sda_temp_max[i].dev_attr);
|
||||
device_remove_file(dev, &sda_temp_max_hyst[i].dev_attr);
|
||||
device_remove_file(dev, &sda_temp_crit[i].dev_attr);
|
||||
device_remove_file(dev, &sda_temp_alarm[i].dev_attr);
|
||||
if (!(data->have_temp_fixed & (1 << i)))
|
||||
continue;
|
||||
device_remove_file(dev, &sda_temp_type[i].dev_attr);
|
||||
device_remove_file(dev, &sda_temp_offset[i].dev_attr);
|
||||
if (i >= NUM_TEMP_ALARM)
|
||||
continue;
|
||||
device_remove_file(dev, &sda_temp_alarm[i].dev_attr);
|
||||
}
|
||||
|
||||
device_remove_file(dev, &sda_caseopen[0].dev_attr);
|
||||
@ -3419,6 +3450,7 @@ static int nct6775_probe(struct platform_device *pdev)
|
||||
data->auto_pwm_num = 6;
|
||||
data->has_fan_div = true;
|
||||
data->temp_fixed_num = 3;
|
||||
data->num_temp_alarms = 3;
|
||||
|
||||
data->ALARM_BITS = NCT6775_ALARM_BITS;
|
||||
|
||||
@ -3483,6 +3515,7 @@ static int nct6775_probe(struct platform_device *pdev)
|
||||
data->auto_pwm_num = 4;
|
||||
data->has_fan_div = false;
|
||||
data->temp_fixed_num = 3;
|
||||
data->num_temp_alarms = 3;
|
||||
|
||||
data->ALARM_BITS = NCT6776_ALARM_BITS;
|
||||
|
||||
@ -3547,6 +3580,7 @@ static int nct6775_probe(struct platform_device *pdev)
|
||||
data->auto_pwm_num = 4;
|
||||
data->has_fan_div = false;
|
||||
data->temp_fixed_num = 6;
|
||||
data->num_temp_alarms = 2;
|
||||
|
||||
data->ALARM_BITS = NCT6779_ALARM_BITS;
|
||||
|
||||
@ -3843,10 +3877,12 @@ static int nct6775_probe(struct platform_device *pdev)
|
||||
&sda_fan_input[i].dev_attr);
|
||||
if (err)
|
||||
goto exit_remove;
|
||||
if (data->ALARM_BITS[FAN_ALARM_BASE + i] >= 0) {
|
||||
err = device_create_file(dev,
|
||||
&sda_fan_alarm[i].dev_attr);
|
||||
if (err)
|
||||
goto exit_remove;
|
||||
}
|
||||
if (data->kind != nct6776 &&
|
||||
data->kind != nct6779) {
|
||||
err = device_create_file(dev,
|
||||
@ -3897,6 +3933,12 @@ static int nct6775_probe(struct platform_device *pdev)
|
||||
if (err)
|
||||
goto exit_remove;
|
||||
}
|
||||
if (find_temp_source(data, i, data->num_temp_alarms) >= 0) {
|
||||
err = device_create_file(dev,
|
||||
&sda_temp_alarm[i].dev_attr);
|
||||
if (err)
|
||||
goto exit_remove;
|
||||
}
|
||||
if (!(data->have_temp_fixed & (1 << i)))
|
||||
continue;
|
||||
err = device_create_file(dev, &sda_temp_type[i].dev_attr);
|
||||
@ -3905,12 +3947,6 @@ static int nct6775_probe(struct platform_device *pdev)
|
||||
err = device_create_file(dev, &sda_temp_offset[i].dev_attr);
|
||||
if (err)
|
||||
goto exit_remove;
|
||||
if (i >= NUM_TEMP_ALARM ||
|
||||
data->ALARM_BITS[TEMP_ALARM_BASE + i] < 0)
|
||||
continue;
|
||||
err = device_create_file(dev, &sda_temp_alarm[i].dev_attr);
|
||||
if (err)
|
||||
goto exit_remove;
|
||||
}
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(sda_caseopen); i++) {
|
||||
|
||||
@ -514,7 +514,6 @@ static int ntc_thermistor_remove(struct platform_device *pdev)
|
||||
hwmon_device_unregister(data->hwmon_dev);
|
||||
sysfs_remove_group(&data->dev->kobj, &ntc_attr_group);
|
||||
ntc_iio_channel_release(pdata);
|
||||
platform_set_drvdata(pdev, NULL);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
@ -2598,7 +2598,6 @@ static int w83627ehf_probe(struct platform_device *pdev)
|
||||
exit_remove:
|
||||
w83627ehf_device_remove_files(dev);
|
||||
exit_release:
|
||||
platform_set_drvdata(pdev, NULL);
|
||||
release_region(res->start, IOREGION_LENGTH);
|
||||
exit:
|
||||
return err;
|
||||
@ -2611,7 +2610,6 @@ static int w83627ehf_remove(struct platform_device *pdev)
|
||||
hwmon_device_unregister(data->hwmon_dev);
|
||||
w83627ehf_device_remove_files(&pdev->dev);
|
||||
release_region(data->addr, IOREGION_LENGTH);
|
||||
platform_set_drvdata(pdev, NULL);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
37
include/linux/platform_data/g762.h
Normal file
37
include/linux/platform_data/g762.h
Normal file
@ -0,0 +1,37 @@
|
||||
/*
|
||||
* Platform data structure for g762 fan controller driver
|
||||
*
|
||||
* Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||||
*/
|
||||
#ifndef __LINUX_PLATFORM_DATA_G762_H__
|
||||
#define __LINUX_PLATFORM_DATA_G762_H__
|
||||
|
||||
/*
|
||||
* Following structure can be used to set g762 driver platform specific data
|
||||
* during board init. Note that passing a sparse structure is possible but
|
||||
* will result in non-specified attributes to be set to default value, hence
|
||||
* overloading those installed during boot (e.g. by u-boot).
|
||||
*/
|
||||
|
||||
struct g762_platform_data {
|
||||
u32 fan_startv;
|
||||
u32 fan_gear_mode;
|
||||
u32 pwm_polarity;
|
||||
u32 clk_freq;
|
||||
};
|
||||
|
||||
#endif /* __LINUX_PLATFORM_DATA_G762_H__ */
|
||||
Loading…
Reference in New Issue
Block a user