ARM: OMAP1: ams-delta: clean up init data section assignments

The main purpose of this patch is to fix several section mismatch
warnings from the board file and a few board specific drivers,
introduced with recent Amstrad Delta patch series, some of them rising
up only when building with CONFIG_MODULES not set.

While being at it, section tagging of all init data found in the board
file have been revised and hopefully corrected and/or optimized.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This commit is contained in:
Janusz Krzysztofik 2012-02-10 17:48:43 +01:00 committed by Tony Lindgren
parent dc0caefdf4
commit da564a05b3
4 changed files with 12 additions and 12 deletions

View File

@ -150,7 +150,7 @@ static struct map_desc ams_delta_io_desc[] __initdata = {
}
};
static struct omap_lcd_config ams_delta_lcd_config = {
static struct omap_lcd_config ams_delta_lcd_config __initdata = {
.ctrl_name = "internal",
};
@ -167,7 +167,7 @@ static struct omap_board_config_kernel ams_delta_config[] __initdata = {
#define LATCH1_GPIO_BASE 232
#define LATCH1_NGPIO 8
static struct resource latch1_resources[] __initconst = {
static struct resource latch1_resources[] = {
[0] = {
.name = "dat",
.start = LATCH1_PHYS,
@ -176,7 +176,7 @@ static struct resource latch1_resources[] __initconst = {
},
};
static struct bgpio_pdata latch1_pdata __initconst = {
static struct bgpio_pdata latch1_pdata = {
.base = LATCH1_GPIO_BASE,
.ngpio = LATCH1_NGPIO,
};
@ -191,7 +191,7 @@ static struct platform_device latch1_gpio_device = {
},
};
static struct resource latch2_resources[] __initconst = {
static struct resource latch2_resources[] = {
[0] = {
.name = "dat",
.start = LATCH2_PHYS,
@ -200,7 +200,7 @@ static struct resource latch2_resources[] __initconst = {
},
};
static struct bgpio_pdata latch2_pdata __initconst = {
static struct bgpio_pdata latch2_pdata = {
.base = AMS_DELTA_LATCH2_GPIO_BASE,
.ngpio = AMS_DELTA_LATCH2_NGPIO,
};
@ -215,7 +215,7 @@ static struct platform_device latch2_gpio_device = {
},
};
static struct gpio latch_gpios[] __initconst = {
static const struct gpio latch_gpios[] __initconst = {
{
.gpio = LATCH1_GPIO_BASE + 6,
.flags = GPIOF_OUT_INIT_LOW,
@ -322,7 +322,7 @@ static struct platform_device ams_delta_lcd_device = {
.id = -1,
};
static struct gpio_led gpio_leds[] __initconst = {
static const struct gpio_led gpio_leds[] __initconst = {
{
.name = "camera",
.gpio = LATCH1_GPIO_BASE + 0,
@ -358,7 +358,7 @@ static struct gpio_led gpio_leds[] __initconst = {
},
};
static struct gpio_led_platform_data leds_pdata __initconst = {
static const struct gpio_led_platform_data leds_pdata __initconst = {
.leds = gpio_leds,
.num_leds = ARRAY_SIZE(gpio_leds),
};
@ -415,7 +415,7 @@ static struct platform_device *ams_delta_devices[] __initdata = {
&ams_delta_camera_device,
};
static struct platform_device *late_devices[] __initconst = {
static struct platform_device *late_devices[] __initdata = {
&ams_delta_nand_device,
&ams_delta_lcd_device,
};

View File

@ -103,7 +103,7 @@ static void ams_delta_serio_close(struct serio *serio)
gpio_set_value(AMS_DELTA_GPIO_PIN_KEYBRD_PWR, 0);
}
static struct gpio ams_delta_gpios[] __initconst_or_module = {
static const struct gpio ams_delta_gpios[] __initconst_or_module = {
{
.gpio = AMS_DELTA_GPIO_PIN_KEYBRD_DATA,
.flags = GPIOF_DIR_IN,

View File

@ -145,7 +145,7 @@ static int ams_delta_nand_ready(struct mtd_info *mtd)
return gpio_get_value(AMS_DELTA_GPIO_PIN_NAND_RB);
}
static struct gpio _mandatory_gpio[] __initconst_or_module = {
static const struct gpio _mandatory_gpio[] = {
{
.gpio = AMS_DELTA_GPIO_PIN_NAND_NCE,
.flags = GPIOF_OUT_INIT_HIGH,

View File

@ -99,7 +99,7 @@ static struct lcd_ops ams_delta_lcd_ops = {
/* omapfb panel section */
static struct gpio _gpios[] __initconst_or_module = {
static const struct gpio _gpios[] = {
{
.gpio = AMS_DELTA_GPIO_PIN_LCD_VBLEN,
.flags = GPIOF_OUT_INIT_LOW,