mirror of
https://github.com/torvalds/linux.git
synced 2024-11-19 10:31:48 +00:00
PCI: designware: Wait for iATU enable
Add a loop with timeout to make sure the iATU is really enabled before subsequent config and I/O accesses. [bhelgaas: split to separate patch, use dev_err() instead of dev_dbg()] Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
This commit is contained in:
parent
c388de1c4f
commit
d8bbeb39fb
@ -31,7 +31,12 @@
|
||||
#define LINK_WAIT_USLEEP_MIN 90000
|
||||
#define LINK_WAIT_USLEEP_MAX 100000
|
||||
|
||||
/* Synopsis specific PCIE configuration registers */
|
||||
/* Parameters for the waiting for iATU enabled routine */
|
||||
#define LINK_WAIT_MAX_IATU_RETRIES 5
|
||||
#define LINK_WAIT_IATU_MIN 9000
|
||||
#define LINK_WAIT_IATU_MAX 10000
|
||||
|
||||
/* Synopsys-specific PCIe configuration registers */
|
||||
#define PCIE_PORT_LINK_CONTROL 0x710
|
||||
#define PORT_LINK_MODE_MASK (0x3f << 16)
|
||||
#define PORT_LINK_MODE_1_LANES (0x1 << 16)
|
||||
@ -157,7 +162,7 @@ static int dw_pcie_wr_own_conf(struct pcie_port *pp, int where, int size,
|
||||
static void dw_pcie_prog_outbound_atu(struct pcie_port *pp, int index,
|
||||
int type, u64 cpu_addr, u64 pci_addr, u32 size)
|
||||
{
|
||||
u32 val;
|
||||
u32 retries, val;
|
||||
|
||||
dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | index,
|
||||
PCIE_ATU_VIEWPORT);
|
||||
@ -174,7 +179,14 @@ static void dw_pcie_prog_outbound_atu(struct pcie_port *pp, int index,
|
||||
* Make sure ATU enable takes effect before any subsequent config
|
||||
* and I/O accesses.
|
||||
*/
|
||||
val = dw_pcie_readl_rc(pp, PCIE_ATU_CR2);
|
||||
for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES; retries++) {
|
||||
val = dw_pcie_readl_rc(pp, PCIE_ATU_CR2);
|
||||
if (val == PCIE_ATU_ENABLE)
|
||||
return;
|
||||
|
||||
usleep_range(LINK_WAIT_IATU_MIN, LINK_WAIT_IATU_MAX);
|
||||
}
|
||||
dev_err(pp->dev, "iATU is not being enabled\n");
|
||||
}
|
||||
|
||||
static struct irq_chip dw_msi_irq_chip = {
|
||||
|
Loading…
Reference in New Issue
Block a user