Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-19 02:21:47 +00:00
Code Issues Packages Projects Releases Wiki Activity

Bluetooth: serdev: hci_ll: Wait for CTS instead of using msleep

Browse Source 
When a TI Bluetooth chip is reset, it takes about 100ms for the RTS line of
the chip to deassert. For my use case with a TI CC2560A chip, this delay
was not long enough and caused the local UART to never transmit at all (TI
AM1808 SoC UART2).

We can wait for the CTS signal using serdev_device_wait_for_cts() instead
of trying to guess using msleep().

Also changed the comment to be more informative while we are touching this
code.

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This commit is contained in:
David Lechner 2017-12-02 20:43:55 -06:00 committed by Marcel Holtmann
parent 059fb82307
commit d54fdcf924
1 changed files with 6 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
drivers/bluetooth/hci_ll.c
View File

@ -674,11 +674,15 @@ static int ll_setup(struct hci_uart *hu)
serdev_device_set_flow_control(serdev, true);
do {
/* Configure BT_EN to HIGH state */
/* Reset the Bluetooth device */
gpiod_set_value_cansleep(lldev->enable_gpio, 0);
msleep(5);
gpiod_set_value_cansleep(lldev->enable_gpio, 1);
msleep(100);
err = serdev_device_wait_for_cts(serdev, true, 200);
if (err) {
bt_dev_err(hu->hdev, "Failed to get CTS");
return err;
}
err = download_firmware(lldev);
if (!err)